mirror/binutils-gdb
2
0
Fork 0
mirror of https://sourceware.org/git/binutils-gdb.git synced 2024-11-27 03:51:15 +08:00
Code Issues Packages Projects Releases Wiki Activity
fe174262ec
binutils-gdb/bfd/reloc.c

2906 lines
80 KiB
C
Raw Blame History

/* BFD support for handling relocation entries.
Copyright (C) 1990, 91, 92, 93, 94, 95, 96, 97, 98, 1999
Free Software Foundation, Inc.
Written by Cygnus Support.
This file is part of BFD, the Binary File Descriptor library.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
/*
SECTION
Relocations
BFD maintains relocations in much the same way it maintains
symbols: they are left alone until required, then read in
en-mass and translated into an internal form. A common
routine <<bfd_perform_relocation>> acts upon the
canonical form to do the fixup.
Relocations are maintained on a per section basis,
while symbols are maintained on a per BFD basis.
All that a back end has to do to fit the BFD interface is to create
a <<struct reloc_cache_entry>> for each relocation
in a particular section, and fill in the right bits of the structures.
@menu
@* typedef arelent::
@* howto manager::
@end menu
*/
/* DO compile in the reloc_code name table from libbfd.h. */
#define _BFD_MAKE_TABLE_bfd_reloc_code_real
#include "bfd.h"
#include "sysdep.h"
#include "bfdlink.h"
#include "libbfd.h"
/*
DOCDD
INODE
typedef arelent, howto manager, Relocations, Relocations
SUBSECTION
typedef arelent
This is the structure of a relocation entry:
CODE_FRAGMENT
.
.typedef enum bfd_reloc_status
.{
. {* No errors detected *}
. bfd_reloc_ok,
.
. {* The relocation was performed, but there was an overflow. *}
. bfd_reloc_overflow,
.
. {* The address to relocate was not within the section supplied. *}
. bfd_reloc_outofrange,
.
. {* Used by special functions *}
. bfd_reloc_continue,
.
. {* Unsupported relocation size requested. *}
. bfd_reloc_notsupported,
.
. {* Unused *}
. bfd_reloc_other,
.
. {* The symbol to relocate against was undefined. *}
. bfd_reloc_undefined,
.
. {* The relocation was performed, but may not be ok - presently
. generated only when linking i960 coff files with i960 b.out
. symbols. If this type is returned, the error_message argument
. to bfd_perform_relocation will be set. *}
. bfd_reloc_dangerous
. }
. bfd_reloc_status_type;
.
.
.typedef struct reloc_cache_entry
.{
. {* A pointer into the canonical table of pointers *}
. struct symbol_cache_entry **sym_ptr_ptr;
.
. {* offset in section *}
. bfd_size_type address;
.
. {* addend for relocation value *}
. bfd_vma addend;
.
. {* Pointer to how to perform the required relocation *}
. reloc_howto_type *howto;
.
.} arelent;
*/
/*
DESCRIPTION
Here is a description of each of the fields within an <<arelent>>:
o <<sym_ptr_ptr>>
The symbol table pointer points to a pointer to the symbol
associated with the relocation request. It is
the pointer into the table returned by the back end's
<<get_symtab>> action. @xref{Symbols}. The symbol is referenced
through a pointer to a pointer so that tools like the linker
can fix up all the symbols of the same name by modifying only
one pointer. The relocation routine looks in the symbol and
uses the base of the section the symbol is attached to and the
value of the symbol as the initial relocation offset. If the
symbol pointer is zero, then the section provided is looked up.
o <<address>>
The <<address>> field gives the offset in bytes from the base of
the section data which owns the relocation record to the first
byte of relocatable information. The actual data relocated
will be relative to this point; for example, a relocation
type which modifies the bottom two bytes of a four byte word
would not touch the first byte pointed to in a big endian
world.
o <<addend>>
The <<addend>> is a value provided by the back end to be added (!)
to the relocation offset. Its interpretation is dependent upon
the howto. For example, on the 68k the code:
| char foo[];
| main()
| {
| return foo[0x12345678];
| }
Could be compiled into:
| linkw fp,#-4
| moveb @@#12345678,d0
| extbl d0
| unlk fp
| rts
This could create a reloc pointing to <<foo>>, but leave the
offset in the data, something like:
|RELOCATION RECORDS FOR [.text]:
|offset type value
|00000006 32 _foo
|
|00000000 4e56 fffc ; linkw fp,#-4
|00000004 1039 1234 5678 ; moveb @@#12345678,d0
|0000000a 49c0 ; extbl d0
|0000000c 4e5e ; unlk fp
|0000000e 4e75 ; rts
Using coff and an 88k, some instructions don't have enough
space in them to represent the full address range, and
pointers have to be loaded in two parts. So you'd get something like:
| or.u r13,r0,hi16(_foo+0x12345678)
| ld.b r2,r13,lo16(_foo+0x12345678)
| jmp r1
This should create two relocs, both pointing to <<_foo>>, and with
0x12340000 in their addend field. The data would consist of:
|RELOCATION RECORDS FOR [.text]:
|offset type value
|00000002 HVRT16 _foo+0x12340000
|00000006 LVRT16 _foo+0x12340000
|
|00000000 5da05678 ; or.u r13,r0,0x5678
|00000004 1c4d5678 ; ld.b r2,r13,0x5678
|00000008 f400c001 ; jmp r1
The relocation routine digs out the value from the data, adds
it to the addend to get the original offset, and then adds the
value of <<_foo>>. Note that all 32 bits have to be kept around
somewhere, to cope with carry from bit 15 to bit 16.
One further example is the sparc and the a.out format. The
sparc has a similar problem to the 88k, in that some
instructions don't have room for an entire offset, but on the
sparc the parts are created in odd sized lumps. The designers of
the a.out format chose to not use the data within the section
for storing part of the offset; all the offset is kept within
the reloc. Anything in the data should be ignored.
| save %sp,-112,%sp
| sethi %hi(_foo+0x12345678),%g2
| ldsb [%g2+%lo(_foo+0x12345678)],%i0
| ret
| restore
Both relocs contain a pointer to <<foo>>, and the offsets
contain junk.
|RELOCATION RECORDS FOR [.text]:
|offset type value
|00000004 HI22 _foo+0x12345678
|00000008 LO10 _foo+0x12345678
|
|00000000 9de3bf90 ; save %sp,-112,%sp
|00000004 05000000 ; sethi %hi(_foo+0),%g2
|00000008 f048a000 ; ldsb [%g2+%lo(_foo+0)],%i0
|0000000c 81c7e008 ; ret
|00000010 81e80000 ; restore
o <<howto>>
The <<howto>> field can be imagined as a
relocation instruction. It is a pointer to a structure which
contains information on what to do with all of the other
information in the reloc record and data section. A back end
would normally have a relocation instruction set and turn
relocations into pointers to the correct structure on input -
but it would be possible to create each howto field on demand.
*/
/*
SUBSUBSECTION
<<enum complain_overflow>>
Indicates what sort of overflow checking should be done when
performing a relocation.
CODE_FRAGMENT
.
.enum complain_overflow
.{
. {* Do not complain on overflow. *}
. complain_overflow_dont,
.
. {* Complain if the bitfield overflows, whether it is considered
. as signed or unsigned. *}
. complain_overflow_bitfield,
.
. {* Complain if the value overflows when considered as signed
. number. *}
. complain_overflow_signed,
.
. {* Complain if the value overflows when considered as an
. unsigned number. *}
. complain_overflow_unsigned
.};
*/
/*
SUBSUBSECTION
<<reloc_howto_type>>
The <<reloc_howto_type>> is a structure which contains all the
information that libbfd needs to know to tie up a back end's data.
CODE_FRAGMENT
.struct symbol_cache_entry; {* Forward declaration *}
.
.struct reloc_howto_struct
.{
. {* The type field has mainly a documentary use - the back end can
. do what it wants with it, though normally the back end's
. external idea of what a reloc number is stored
. in this field. For example, a PC relative word relocation
. in a coff environment has the type 023 - because that's
. what the outside world calls a R_PCRWORD reloc. *}
. unsigned int type;
.
. {* The value the final relocation is shifted right by. This drops
. unwanted data from the relocation. *}
. unsigned int rightshift;
.
. {* The size of the item to be relocated. This is *not* a
. power-of-two measure. To get the number of bytes operated
. on by a type of relocation, use bfd_get_reloc_size. *}
. int size;
.
. {* The number of bits in the item to be relocated. This is used
. when doing overflow checking. *}
. unsigned int bitsize;
.
. {* Notes that the relocation is relative to the location in the
. data section of the addend. The relocation function will
. subtract from the relocation value the address of the location
. being relocated. *}
. boolean pc_relative;
.
. {* The bit position of the reloc value in the destination.
. The relocated value is left shifted by this amount. *}
. unsigned int bitpos;
.
. {* What type of overflow error should be checked for when
. relocating. *}
. enum complain_overflow complain_on_overflow;
.
. {* If this field is non null, then the supplied function is
. called rather than the normal function. This allows really
. strange relocation methods to be accomodated (e.g., i960 callj
. instructions). *}
. bfd_reloc_status_type (*special_function)
. PARAMS ((bfd *abfd,
. arelent *reloc_entry,
. struct symbol_cache_entry *symbol,
. PTR data,
. asection *input_section,
. bfd *output_bfd,
. char **error_message));
.
. {* The textual name of the relocation type. *}
. char *name;
.
. {* When performing a partial link, some formats must modify the
. relocations rather than the data - this flag signals this.*}
. boolean partial_inplace;
.
. {* The src_mask selects which parts of the read in data
. are to be used in the relocation sum. E.g., if this was an 8 bit
. bit of data which we read and relocated, this would be
. 0x000000ff. When we have relocs which have an addend, such as
. sun4 extended relocs, the value in the offset part of a
. relocating field is garbage so we never use it. In this case
. the mask would be 0x00000000. *}
. bfd_vma src_mask;
.
. {* The dst_mask selects which parts of the instruction are replaced
. into the instruction. In most cases src_mask == dst_mask,
. except in the above special case, where dst_mask would be
. 0x000000ff, and src_mask would be 0x00000000. *}
. bfd_vma dst_mask;
.
. {* When some formats create PC relative instructions, they leave
. the value of the pc of the place being relocated in the offset
. slot of the instruction, so that a PC relative relocation can
. be made just by adding in an ordinary offset (e.g., sun3 a.out).
. Some formats leave the displacement part of an instruction
. empty (e.g., m88k bcs); this flag signals the fact.*}
. boolean pcrel_offset;
.
.};
*/
/*
FUNCTION
The HOWTO Macro
DESCRIPTION
The HOWTO define is horrible and will go away.
.#define HOWTO(C, R,S,B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
. {(unsigned)C,R,S,B, P, BI, O,SF,NAME,INPLACE,MASKSRC,MASKDST,PC}
DESCRIPTION
And will be replaced with the totally magic way. But for the
moment, we are compatible, so do it this way.
.#define NEWHOWTO( FUNCTION, NAME,SIZE,REL,IN) HOWTO(0,0,SIZE,0,REL,0,complain_overflow_dont,FUNCTION, NAME,false,0,0,IN)
.
DESCRIPTION
This is used to fill in an empty howto entry in an array.
.#define EMPTY_HOWTO(C) \
. HOWTO((C),0,0,0,false,0,complain_overflow_dont,NULL,NULL,false,0,0,false)
.
DESCRIPTION
Helper routine to turn a symbol into a relocation value.
.#define HOWTO_PREPARE(relocation, symbol) \
. { \
. if (symbol != (asymbol *)NULL) { \
. if (bfd_is_com_section (symbol->section)) { \
. relocation = 0; \
. } \
. else { \
. relocation = symbol->value; \
. } \
. } \
.}
*/
/*
FUNCTION
bfd_get_reloc_size
SYNOPSIS
unsigned int bfd_get_reloc_size (reloc_howto_type *);
DESCRIPTION
For a reloc_howto_type that operates on a fixed number of bytes,
this returns the number of bytes operated on.
*/
unsigned int
bfd_get_reloc_size (howto)
reloc_howto_type *howto;
{
switch (howto->size)
{
case 0: return 1;
case 1: return 2;
case 2: return 4;
case 3: return 0;
case 4: return 8;
case 8: return 16;
case -2: return 4;
default: abort ();
}
}
/*
TYPEDEF
arelent_chain
DESCRIPTION
How relocs are tied together in an <<asection>>:
.typedef struct relent_chain {
. arelent relent;
. struct relent_chain *next;
.} arelent_chain;
*/
/* N_ONES produces N one bits, without overflowing machine arithmetic. */
#define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
/*
FUNCTION
bfd_check_overflow
SYNOPSIS
bfd_reloc_status_type
bfd_check_overflow
(enum complain_overflow how,
unsigned int bitsize,
unsigned int rightshift,
unsigned int addrsize,
bfd_vma relocation);
DESCRIPTION
Perform overflow checking on @var{relocation} which has
@var{bitsize} significant bits and will be shifted right by
@var{rightshift} bits, on a machine with addresses containing
@var{addrsize} significant bits. The result is either of
@code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
*/
bfd_reloc_status_type
bfd_check_overflow (how, bitsize, rightshift, addrsize, relocation)
enum complain_overflow how;
unsigned int bitsize;
unsigned int rightshift;
unsigned int addrsize;
bfd_vma relocation;
{
bfd_vma fieldmask, addrmask, signmask, ss, a;
bfd_reloc_status_type flag = bfd_reloc_ok;
a = relocation;
/* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
we'll be permissive: extra bits in the field mask will
automatically extend the address mask for purposes of the
overflow check. */
fieldmask = N_ONES (bitsize);
addrmask = N_ONES (addrsize) | fieldmask;
switch (how)
{
case complain_overflow_dont:
break;
case complain_overflow_signed:
/* If any sign bits are set, all sign bits must be set. That
is, A must be a valid negative address after shifting. */
a = (a & addrmask) >> rightshift;
signmask = ~ (fieldmask >> 1);
ss = a & signmask;
if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
flag = bfd_reloc_overflow;
break;
case complain_overflow_unsigned:
/* We have an overflow if the address does not fit in the field. */
a = (a & addrmask) >> rightshift;
if ((a & ~ fieldmask) != 0)
flag = bfd_reloc_overflow;
break;
case complain_overflow_bitfield:
/* Bitfields are sometimes signed, sometimes unsigned. We
overflow if the value has some, but not all, bits set outside
the field, or if it has any bits set outside the field but
the sign bit is not set. */
a >>= rightshift;
if ((a & ~ fieldmask) != 0)
{
signmask = (fieldmask >> 1) + 1;
ss = (signmask << rightshift) - 1;
if ((ss | relocation) != ~ (bfd_vma) 0)
flag = bfd_reloc_overflow;
}
break;
default:
abort ();
}
return flag;
}
/*
FUNCTION
bfd_perform_relocation
SYNOPSIS
bfd_reloc_status_type
bfd_perform_relocation
(bfd *abfd,
arelent *reloc_entry,
PTR data,
asection *input_section,
bfd *output_bfd,
char **error_message);
DESCRIPTION
If @var{output_bfd} is supplied to this function, the
generated image will be relocatable; the relocations are
copied to the output file after they have been changed to
reflect the new state of the world. There are two ways of
reflecting the results of partial linkage in an output file:
by modifying the output data in place, and by modifying the
relocation record. Some native formats (e.g., basic a.out and
basic coff) have no way of specifying an addend in the
relocation type, so the addend has to go in the output data.
This is no big deal since in these formats the output data
slot will always be big enough for the addend. Complex reloc
types with addends were invented to solve just this problem.
The @var{error_message} argument is set to an error message if
this return @code{bfd_reloc_dangerous}.
*/
bfd_reloc_status_type
bfd_perform_relocation (abfd, reloc_entry, data, input_section, output_bfd,
error_message)
bfd *abfd;
arelent *reloc_entry;
PTR data;
asection *input_section;
bfd *output_bfd;
char **error_message;
{
bfd_vma relocation;
bfd_reloc_status_type flag = bfd_reloc_ok;
bfd_size_type addr = reloc_entry->address;
bfd_vma output_base = 0;
reloc_howto_type *howto = reloc_entry->howto;
asection *reloc_target_output_section;
asymbol *symbol;
symbol = *(reloc_entry->sym_ptr_ptr);
if (bfd_is_abs_section (symbol->section)
&& output_bfd != (bfd *) NULL)
{
reloc_entry->address += input_section->output_offset;
return bfd_reloc_ok;
}
/* If we are not producing relocateable output, return an error if
the symbol is not defined. An undefined weak symbol is
considered to have a value of zero (SVR4 ABI, p. 4-27). */
if (bfd_is_und_section (symbol->section)
&& (symbol->flags & BSF_WEAK) == 0
&& output_bfd == (bfd *) NULL)
flag = bfd_reloc_undefined;
/* If there is a function supplied to handle this relocation type,
call it. It'll return `bfd_reloc_continue' if further processing
can be done. */
if (howto->special_function)
{
bfd_reloc_status_type cont;
cont = howto->special_function (abfd, reloc_entry, symbol, data,
input_section, output_bfd,
error_message);
if (cont != bfd_reloc_continue)
return cont;
}
/* Is the address of the relocation really within the section? */
if (reloc_entry->address > input_section->_cooked_size)
return bfd_reloc_outofrange;
/* Work out which section the relocation is targetted at and the
initial relocation command value. */
/* Get symbol value. (Common symbols are special.) */
if (bfd_is_com_section (symbol->section))
relocation = 0;
else
relocation = symbol->value;
reloc_target_output_section = symbol->section->output_section;
/* Convert input-section-relative symbol value to absolute. */
if (output_bfd && howto->partial_inplace == false)
output_base = 0;
else
output_base = reloc_target_output_section->vma;
relocation += output_base + symbol->section->output_offset;
/* Add in supplied addend. */
relocation += reloc_entry->addend;
/* Here the variable relocation holds the final address of the
symbol we are relocating against, plus any addend. */
if (howto->pc_relative == true)
{
/* This is a PC relative relocation. We want to set RELOCATION
to the distance between the address of the symbol and the
location. RELOCATION is already the address of the symbol.
We start by subtracting the address of the section containing
the location.
If pcrel_offset is set, we must further subtract the position
of the location within the section. Some targets arrange for
the addend to be the negative of the position of the location
within the section; for example, i386-aout does this. For
i386-aout, pcrel_offset is false. Some other targets do not
include the position of the location; for example, m88kbcs,
or ELF. For those targets, pcrel_offset is true.
If we are producing relocateable output, then we must ensure
that this reloc will be correctly computed when the final
relocation is done. If pcrel_offset is false we want to wind
up with the negative of the location within the section,
which means we must adjust the existing addend by the change
in the location within the section. If pcrel_offset is true
we do not want to adjust the existing addend at all.
FIXME: This seems logical to me, but for the case of
producing relocateable output it is not what the code
actually does. I don't want to change it, because it seems
far too likely that something will break. */
relocation -=
input_section->output_section->vma + input_section->output_offset;
if (howto->pcrel_offset == true)
relocation -= reloc_entry->address;
}
if (output_bfd != (bfd *) NULL)
{
if (howto->partial_inplace == false)
{
/* This is a partial relocation, and we want to apply the relocation
to the reloc entry rather than the raw data. Modify the reloc
inplace to reflect what we now know. */
reloc_entry->addend = relocation;
reloc_entry->address += input_section->output_offset;
return flag;
}
else
{
/* This is a partial relocation, but inplace, so modify the
reloc record a bit.
If we've relocated with a symbol with a section, change
into a ref to the section belonging to the symbol. */
reloc_entry->address += input_section->output_offset;
/* WTF?? */
if (abfd->xvec->flavour == bfd_target_coff_flavour
&& strcmp (abfd->xvec->name, "aixcoff-rs6000") != 0
&& strcmp (abfd->xvec->name, "xcoff-powermac") != 0
&& strcmp (abfd->xvec->name, "coff-Intel-little") != 0
&& strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
{
#if 1
/* For m68k-coff, the addend was being subtracted twice during
relocation with -r. Removing the line below this comment
fixes that problem; see PR 2953.
However, Ian wrote the following, regarding removing the line below,
which explains why it is still enabled: --djm
If you put a patch like that into BFD you need to check all the COFF
linkers. I am fairly certain that patch will break coff-i386 (e.g.,
SCO); see coff_i386_reloc in coff-i386.c where I worked around the
problem in a different way. There may very well be a reason that the
code works as it does.
Hmmm. The first obvious point is that bfd_perform_relocation should
not have any tests that depend upon the flavour. It's seem like
entirely the wrong place for such a thing. The second obvious point
is that the current code ignores the reloc addend when producing
relocateable output for COFF. That's peculiar. In fact, I really
have no idea what the point of the line you want to remove is.
A typical COFF reloc subtracts the old value of the symbol and adds in
the new value to the location in the object file (if it's a pc
relative reloc it adds the difference between the symbol value and the
location). When relocating we need to preserve that property.
BFD handles this by setting the addend to the negative of the old
value of the symbol. Unfortunately it handles common symbols in a
non-standard way (it doesn't subtract the old value) but that's a
different story (we can't change it without losing backward
compatibility with old object files) (coff-i386 does subtract the old
value, to be compatible with existing coff-i386 targets, like SCO).
So everything works fine when not producing relocateable output. When
we are producing relocateable output, logically we should do exactly
what we do when not producing relocateable output. Therefore, your
patch is correct. In fact, it should probably always just set
reloc_entry->addend to 0 for all cases, since it is, in fact, going to
add the value into the object file. This won't hurt the COFF code,
which doesn't use the addend; I'm not sure what it will do to other
formats (the thing to check for would be whether any formats both use
the addend and set partial_inplace).
When I wanted to make coff-i386 produce relocateable output, I ran
into the problem that you are running into: I wanted to remove that
line. Rather than risk it, I made the coff-i386 relocs use a special
function; it's coff_i386_reloc in coff-i386.c. The function
specifically adds the addend field into the object file, knowing that
bfd_perform_relocation is not going to. If you remove that line, then
coff-i386.c will wind up adding the addend field in twice. It's
trivial to fix; it just needs to be done.
The problem with removing the line is just that it may break some
working code. With BFD it's hard to be sure of anything. The right
way to deal with this is simply to build and test at least all the
supported COFF targets. It should be straightforward if time and disk
space consuming. For each target:
1) build the linker
2) generate some executable, and link it using -r (I would
probably use paranoia.o and link against newlib/libc.a, which
for all the supported targets would be available in
/usr/cygnus/progressive/H-host/target/lib/libc.a).
3) make the change to reloc.c
4) rebuild the linker
5) repeat step 2
6) if the resulting object files are the same, you have at least
made it no worse
7) if they are different you have to figure out which version is
right
*/
relocation -= reloc_entry->addend;
#endif
reloc_entry->addend = 0;
}
else
{
reloc_entry->addend = relocation;
}
}
}
else
{
reloc_entry->addend = 0;
}
/* FIXME: This overflow checking is incomplete, because the value
might have overflowed before we get here. For a correct check we
need to compute the value in a size larger than bitsize, but we
can't reasonably do that for a reloc the same size as a host
machine word.
FIXME: We should also do overflow checking on the result after
adding in the value contained in the object file. */
if (howto->complain_on_overflow != complain_overflow_dont
&& flag == bfd_reloc_ok)
flag = bfd_check_overflow (howto->complain_on_overflow,
howto->bitsize,
howto->rightshift,
bfd_arch_bits_per_address (abfd),
relocation);
/*
Either we are relocating all the way, or we don't want to apply
the relocation to the reloc entry (probably because there isn't
any room in the output format to describe addends to relocs)
*/
/* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
(OSF version 1.3, compiler version 3.11). It miscompiles the
following program:
struct str
{
unsigned int i0;
} s = { 0 };
int
main ()
{
unsigned long x;
x = 0x100000000;
x <<= (unsigned long) s.i0;
if (x == 0)
printf ("failed\n");
else
printf ("succeeded (%lx)\n", x);
}
*/
relocation >>= (bfd_vma) howto->rightshift;
/* Shift everything up to where it's going to be used */
relocation <<= (bfd_vma) howto->bitpos;
/* Wait for the day when all have the mask in them */
/* What we do:
i instruction to be left alone
o offset within instruction
r relocation offset to apply
S src mask
D dst mask
N ~dst mask
A part 1
B part 2
R result
Do this:
i i i i i o o o o o from bfd_get<size>
and S S S S S to get the size offset we want
+ r r r r r r r r r r to get the final value to place
and D D D D D to chop to right size
-----------------------
A A A A A
And this:
... i i i i i o o o o o from bfd_get<size>
and N N N N N get instruction
-----------------------
... B B B B B
And then:
B B B B B
or A A A A A
-----------------------
R R R R R R R R R R put into bfd_put<size>
*/
#define DOIT(x) \
x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) + relocation) & howto->dst_mask))
switch (howto->size)
{
case 0:
{
char x = bfd_get_8 (abfd, (char *) data + addr);
DOIT (x);
bfd_put_8 (abfd, x, (unsigned char *) data + addr);
}
break;
case 1:
{
short x = bfd_get_16 (abfd, (bfd_byte *) data + addr);
DOIT (x);
bfd_put_16 (abfd, x, (unsigned char *) data + addr);
}
break;
case 2:
{
long x = bfd_get_32 (abfd, (bfd_byte *) data + addr);
DOIT (x);
bfd_put_32 (abfd, x, (bfd_byte *) data + addr);
}
break;
case -2:
{
long x = bfd_get_32 (abfd, (bfd_byte *) data + addr);
relocation = -relocation;
DOIT (x);
bfd_put_32 (abfd, x, (bfd_byte *) data + addr);
}
break;
case -1:
{
long x = bfd_get_16 (abfd, (bfd_byte *) data + addr);
relocation = -relocation;
DOIT (x);
bfd_put_16 (abfd, x, (bfd_byte *) data + addr);
}
break;
case 3:
/* Do nothing */
break;
case 4:
#ifdef BFD64
{
bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + addr);
DOIT (x);
bfd_put_64 (abfd, x, (bfd_byte *) data + addr);
}
#else
abort ();
#endif
break;
default:
return bfd_reloc_other;
}
return flag;
}
/*
FUNCTION
bfd_install_relocation
SYNOPSIS
bfd_reloc_status_type
bfd_install_relocation
(bfd *abfd,
arelent *reloc_entry,
PTR data, bfd_vma data_start,
asection *input_section,
char **error_message);
DESCRIPTION
This looks remarkably like <<bfd_perform_relocation>>, except it
does not expect that the section contents have been filled in.
I.e., it's suitable for use when creating, rather than applying
a relocation.
For now, this function should be considered reserved for the
assembler.
*/
bfd_reloc_status_type
bfd_install_relocation (abfd, reloc_entry, data_start, data_start_offset,
input_section, error_message)
bfd *abfd;
arelent *reloc_entry;
PTR data_start;
bfd_vma data_start_offset;
asection *input_section;
char **error_message;
{
bfd_vma relocation;
bfd_reloc_status_type flag = bfd_reloc_ok;
bfd_size_type addr = reloc_entry->address;
bfd_vma output_base = 0;
reloc_howto_type *howto = reloc_entry->howto;
asection *reloc_target_output_section;
asymbol *symbol;
bfd_byte *data;
symbol = *(reloc_entry->sym_ptr_ptr);
if (bfd_is_abs_section (symbol->section))
{
reloc_entry->address += input_section->output_offset;
return bfd_reloc_ok;
}
/* If there is a function supplied to handle this relocation type,
call it. It'll return `bfd_reloc_continue' if further processing
can be done. */
if (howto->special_function)
{
bfd_reloc_status_type cont;
/* XXX - The special_function calls haven't been fixed up to deal
with creating new relocations and section contents. */
cont = howto->special_function (abfd, reloc_entry, symbol,
/* XXX - Non-portable! */
((bfd_byte *) data_start
- data_start_offset),
input_section, abfd, error_message);
if (cont != bfd_reloc_continue)
return cont;
}
/* Is the address of the relocation really within the section? */
if (reloc_entry->address > input_section->_cooked_size)
return bfd_reloc_outofrange;
/* Work out which section the relocation is targetted at and the
initial relocation command value. */
/* Get symbol value. (Common symbols are special.) */
if (bfd_is_com_section (symbol->section))
relocation = 0;
else
relocation = symbol->value;
reloc_target_output_section = symbol->section->output_section;
/* Convert input-section-relative symbol value to absolute. */
if (howto->partial_inplace == false)
output_base = 0;
else
output_base = reloc_target_output_section->vma;
relocation += output_base + symbol->section->output_offset;
/* Add in supplied addend. */
relocation += reloc_entry->addend;
/* Here the variable relocation holds the final address of the
symbol we are relocating against, plus any addend. */
if (howto->pc_relative == true)
{
/* This is a PC relative relocation. We want to set RELOCATION
to the distance between the address of the symbol and the
location. RELOCATION is already the address of the symbol.
We start by subtracting the address of the section containing
the location.
If pcrel_offset is set, we must further subtract the position
of the location within the section. Some targets arrange for
the addend to be the negative of the position of the location
within the section; for example, i386-aout does this. For
i386-aout, pcrel_offset is false. Some other targets do not
include the position of the location; for example, m88kbcs,
or ELF. For those targets, pcrel_offset is true.
If we are producing relocateable output, then we must ensure
that this reloc will be correctly computed when the final
relocation is done. If pcrel_offset is false we want to wind
up with the negative of the location within the section,
which means we must adjust the existing addend by the change
in the location within the section. If pcrel_offset is true
we do not want to adjust the existing addend at all.
FIXME: This seems logical to me, but for the case of
producing relocateable output it is not what the code
actually does. I don't want to change it, because it seems
far too likely that something will break. */
relocation -=
input_section->output_section->vma + input_section->output_offset;
if (howto->pcrel_offset == true && howto->partial_inplace == true)
relocation -= reloc_entry->address;
}
if (howto->partial_inplace == false)
{
/* This is a partial relocation, and we want to apply the relocation
to the reloc entry rather than the raw data. Modify the reloc
inplace to reflect what we now know. */
reloc_entry->addend = relocation;
reloc_entry->address += input_section->output_offset;
return flag;
}
else
{
/* This is a partial relocation, but inplace, so modify the
reloc record a bit.
If we've relocated with a symbol with a section, change
into a ref to the section belonging to the symbol. */
reloc_entry->address += input_section->output_offset;
/* WTF?? */
if (abfd->xvec->flavour == bfd_target_coff_flavour
&& strcmp (abfd->xvec->name, "aixcoff-rs6000") != 0
&& strcmp (abfd->xvec->name, "xcoff-powermac") != 0
&& strcmp (abfd->xvec->name, "coff-Intel-little") != 0
&& strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
{
#if 1
/* For m68k-coff, the addend was being subtracted twice during
relocation with -r. Removing the line below this comment
fixes that problem; see PR 2953.
However, Ian wrote the following, regarding removing the line below,
which explains why it is still enabled: --djm
If you put a patch like that into BFD you need to check all the COFF
linkers. I am fairly certain that patch will break coff-i386 (e.g.,
SCO); see coff_i386_reloc in coff-i386.c where I worked around the
problem in a different way. There may very well be a reason that the
code works as it does.
Hmmm. The first obvious point is that bfd_install_relocation should
not have any tests that depend upon the flavour. It's seem like
entirely the wrong place for such a thing. The second obvious point
is that the current code ignores the reloc addend when producing
relocateable output for COFF. That's peculiar. In fact, I really
have no idea what the point of the line you want to remove is.
A typical COFF reloc subtracts the old value of the symbol and adds in
the new value to the location in the object file (if it's a pc
relative reloc it adds the difference between the symbol value and the
location). When relocating we need to preserve that property.
BFD handles this by setting the addend to the negative of the old
value of the symbol. Unfortunately it handles common symbols in a
non-standard way (it doesn't subtract the old value) but that's a
different story (we can't change it without losing backward
compatibility with old object files) (coff-i386 does subtract the old
value, to be compatible with existing coff-i386 targets, like SCO).
So everything works fine when not producing relocateable output. When
we are producing relocateable output, logically we should do exactly
what we do when not producing relocateable output. Therefore, your
patch is correct. In fact, it should probably always just set
reloc_entry->addend to 0 for all cases, since it is, in fact, going to
add the value into the object file. This won't hurt the COFF code,
which doesn't use the addend; I'm not sure what it will do to other
formats (the thing to check for would be whether any formats both use
the addend and set partial_inplace).
When I wanted to make coff-i386 produce relocateable output, I ran
into the problem that you are running into: I wanted to remove that
line. Rather than risk it, I made the coff-i386 relocs use a special
function; it's coff_i386_reloc in coff-i386.c. The function
specifically adds the addend field into the object file, knowing that
bfd_install_relocation is not going to. If you remove that line, then
coff-i386.c will wind up adding the addend field in twice. It's
trivial to fix; it just needs to be done.
The problem with removing the line is just that it may break some
working code. With BFD it's hard to be sure of anything. The right
way to deal with this is simply to build and test at least all the
supported COFF targets. It should be straightforward if time and disk
space consuming. For each target:
1) build the linker
2) generate some executable, and link it using -r (I would
probably use paranoia.o and link against newlib/libc.a, which
for all the supported targets would be available in
/usr/cygnus/progressive/H-host/target/lib/libc.a).
3) make the change to reloc.c
4) rebuild the linker
5) repeat step 2
6) if the resulting object files are the same, you have at least
made it no worse
7) if they are different you have to figure out which version is
right
*/
relocation -= reloc_entry->addend;
#endif
reloc_entry->addend = 0;
}
else
{
reloc_entry->addend = relocation;
}
}
/* FIXME: This overflow checking is incomplete, because the value
might have overflowed before we get here. For a correct check we
need to compute the value in a size larger than bitsize, but we
can't reasonably do that for a reloc the same size as a host
machine word.
FIXME: We should also do overflow checking on the result after
adding in the value contained in the object file. */
if (howto->complain_on_overflow != complain_overflow_dont)
flag = bfd_check_overflow (howto->complain_on_overflow,
howto->bitsize,
howto->rightshift,
bfd_arch_bits_per_address (abfd),
relocation);
/*
Either we are relocating all the way, or we don't want to apply
the relocation to the reloc entry (probably because there isn't
any room in the output format to describe addends to relocs)
*/
/* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
(OSF version 1.3, compiler version 3.11). It miscompiles the
following program:
struct str
{
unsigned int i0;
} s = { 0 };
int
main ()
{
unsigned long x;
x = 0x100000000;
x <<= (unsigned long) s.i0;
if (x == 0)
printf ("failed\n");
else
printf ("succeeded (%lx)\n", x);
}
*/
relocation >>= (bfd_vma) howto->rightshift;
/* Shift everything up to where it's going to be used */
relocation <<= (bfd_vma) howto->bitpos;
/* Wait for the day when all have the mask in them */
/* What we do:
i instruction to be left alone
o offset within instruction
r relocation offset to apply
S src mask
D dst mask
N ~dst mask
A part 1
B part 2
R result
Do this:
i i i i i o o o o o from bfd_get<size>
and S S S S S to get the size offset we want
+ r r r r r r r r r r to get the final value to place
and D D D D D to chop to right size
-----------------------
A A A A A
And this:
... i i i i i o o o o o from bfd_get<size>
and N N N N N get instruction
-----------------------
... B B B B B
And then:
B B B B B
or A A A A A
-----------------------
R R R R R R R R R R put into bfd_put<size>
*/
#define DOIT(x) \
x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) + relocation) & howto->dst_mask))
data = (bfd_byte *) data_start + (addr - data_start_offset);
switch (howto->size)
{
case 0:
{
char x = bfd_get_8 (abfd, (char *) data);
DOIT (x);
bfd_put_8 (abfd, x, (unsigned char *) data);
}
break;
case 1:
{
short x = bfd_get_16 (abfd, (bfd_byte *) data);
DOIT (x);
bfd_put_16 (abfd, x, (unsigned char *) data);
}
break;
case 2:
{
long x = bfd_get_32 (abfd, (bfd_byte *) data);
DOIT (x);
bfd_put_32 (abfd, x, (bfd_byte *) data);
}
break;
case -2:
{
long x = bfd_get_32 (abfd, (bfd_byte *) data);
relocation = -relocation;
DOIT (x);
bfd_put_32 (abfd, x, (bfd_byte *) data);
}
break;
case 3:
/* Do nothing */
break;
case 4:
{
bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data);
DOIT (x);
bfd_put_64 (abfd, x, (bfd_byte *) data);
}
break;
default:
return bfd_reloc_other;
}
return flag;
}
/* This relocation routine is used by some of the backend linkers.
They do not construct asymbol or arelent structures, so there is no
reason for them to use bfd_perform_relocation. Also,
bfd_perform_relocation is so hacked up it is easier to write a new
function than to try to deal with it.
This routine does a final relocation. Whether it is useful for a
relocateable link depends upon how the object format defines
relocations.
FIXME: This routine ignores any special_function in the HOWTO,
since the existing special_function values have been written for
bfd_perform_relocation.
HOWTO is the reloc howto information.
INPUT_BFD is the BFD which the reloc applies to.
INPUT_SECTION is the section which the reloc applies to.
CONTENTS is the contents of the section.
ADDRESS is the address of the reloc within INPUT_SECTION.
VALUE is the value of the symbol the reloc refers to.
ADDEND is the addend of the reloc. */
bfd_reloc_status_type
_bfd_final_link_relocate (howto, input_bfd, input_section, contents, address,
value, addend)
reloc_howto_type *howto;
bfd *input_bfd;
asection *input_section;
bfd_byte *contents;
bfd_vma address;
bfd_vma value;
bfd_vma addend;
{
bfd_vma relocation;
/* Sanity check the address. */
if (address > input_section->_raw_size)
return bfd_reloc_outofrange;
/* This function assumes that we are dealing with a basic relocation
against a symbol. We want to compute the value of the symbol to
relocate to. This is just VALUE, the value of the symbol, plus
ADDEND, any addend associated with the reloc. */
relocation = value + addend;
/* If the relocation is PC relative, we want to set RELOCATION to
the distance between the symbol (currently in RELOCATION) and the
location we are relocating. Some targets (e.g., i386-aout)
arrange for the contents of the section to be the negative of the
offset of the location within the section; for such targets
pcrel_offset is false. Other targets (e.g., m88kbcs or ELF)
simply leave the contents of the section as zero; for such
targets pcrel_offset is true. If pcrel_offset is false we do not
need to subtract out the offset of the location within the
section (which is just ADDRESS). */
if (howto->pc_relative)
{
relocation -= (input_section->output_section->vma
+ input_section->output_offset);
if (howto->pcrel_offset)
relocation -= address;
}
return _bfd_relocate_contents (howto, input_bfd, relocation,
contents + address);
}
/* Relocate a given location using a given value and howto. */
bfd_reloc_status_type
_bfd_relocate_contents (howto, input_bfd, relocation, location)
reloc_howto_type *howto;
bfd *input_bfd;
bfd_vma relocation;
bfd_byte *location;
{
int size;
bfd_vma x = 0;
boolean overflow;
unsigned int rightshift = howto->rightshift;
unsigned int bitpos = howto->bitpos;
/* If the size is negative, negate RELOCATION. This isn't very
general. */
if (howto->size < 0)
relocation = -relocation;
/* Get the value we are going to relocate. */
size = bfd_get_reloc_size (howto);
switch (size)
{
default:
case 0:
abort ();
case 1:
x = bfd_get_8 (input_bfd, location);
break;
case 2:
x = bfd_get_16 (input_bfd, location);
break;
case 4:
x = bfd_get_32 (input_bfd, location);
break;
case 8:
#ifdef BFD64
x = bfd_get_64 (input_bfd, location);
#else
abort ();
#endif
break;
}
/* Check for overflow. FIXME: We may drop bits during the addition
which we don't check for. We must either check at every single
operation, which would be tedious, or we must do the computations
in a type larger than bfd_vma, which would be inefficient. */
overflow = false;
if (howto->complain_on_overflow != complain_overflow_dont)
{
bfd_vma addrmask, fieldmask, signmask, ss;
bfd_vma a, b, sum;
/* Get the values to be added together. For signed and unsigned
relocations, we assume that all values should be truncated to
the size of an address. For bitfields, all the bits matter.
See also bfd_check_overflow. */
fieldmask = N_ONES (howto->bitsize);
addrmask = N_ONES (bfd_arch_bits_per_address (input_bfd)) | fieldmask;
a = relocation;
b = x & howto->src_mask;
switch (howto->complain_on_overflow)
{
case complain_overflow_signed:
a = (a & addrmask) >> rightshift;
/* If any sign bits are set, all sign bits must be set.
That is, A must be a valid negative address after
shifting. */
signmask = ~ (fieldmask >> 1);
ss = a & signmask;
if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
overflow = true;
/* We only need this next bit of code if the sign bit of B
is below the sign bit of A. This would only happen if
SRC_MASK had fewer bits than BITSIZE. Note that if
SRC_MASK has more bits than BITSIZE, we can get into
trouble; we would need to verify that B is in range, as
we do for A above. */
signmask = ((~ howto->src_mask) >> 1) & howto->src_mask;
if ((b & signmask) != 0)
{
/* Set all the bits above the sign bit. */
b -= signmask <<= 1;
}
b = (b & addrmask) >> bitpos;
/* Now we can do the addition. */
sum = a + b;
/* See if the result has the correct sign. Bits above the
sign bit are junk now; ignore them. If the sum is
positive, make sure we did not have all negative inputs;
if the sum is negative, make sure we did not have all
positive inputs. The test below looks only at the sign
bits, and it really just
SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
*/
signmask = (fieldmask >> 1) + 1;
if (((~ (a ^ b)) & (a ^ sum)) & signmask)
overflow = true;
break;
case complain_overflow_unsigned:
/* Checking for an unsigned overflow is relatively easy:
trim the addresses and add, and trim the result as well.
Overflow is normally indicated when the result does not
fit in the field. However, we also need to consider the
case when, e.g., fieldmask is 0x7fffffff or smaller, an
input is 0x80000000, and bfd_vma is only 32 bits; then we
will get sum == 0, but there is an overflow, since the
inputs did not fit in the field. Instead of doing a
separate test, we can check for this by or-ing in the
operands when testing for the sum overflowing its final
field. */
a = (a & addrmask) >> rightshift;
b = (b & addrmask) >> bitpos;
sum = (a + b) & addrmask;
if ((a | b | sum) & ~ fieldmask)
overflow = true;
break;
case complain_overflow_bitfield:
/* Much like unsigned, except no trimming with addrmask. In
addition, the sum overflows if there is a carry out of
the bfd_vma, i.e., the sum is less than either input
operand. */
a >>= rightshift;
b >>= bitpos;
/* Bitfields are sometimes used for signed numbers; for
example, a 13-bit field sometimes represents values in
0..8191 and sometimes represents values in -4096..4095.
If the field is signed and a is -4095 (0x1001) and b is
-1 (0x1fff), the sum is -4096 (0x1000), but (0x1001 +
0x1fff is 0x3000). It's not clear how to handle this
everywhere, since there is not way to know how many bits
are significant in the relocation, but the original code
assumed that it was fully sign extended, and we will keep
that assumption. */
signmask = (fieldmask >> 1) + 1;
if ((a & ~ fieldmask) != 0)
{
/* Some bits out of the field are set. This might not
be a problem: if this is a signed bitfield, it is OK
iff all the high bits are set, including the sign
bit. We'll try setting all but the most significant
bit in the original relocation value: if this is all
ones, we are OK, assuming a signed bitfield. */
ss = (signmask << rightshift) - 1;
if ((ss | relocation) != ~ (bfd_vma) 0)
overflow = true;
a &= fieldmask;
}
/* We just assume (b & ~ fieldmask) == 0. */
/* We explicitly permit wrap around if this relocation
covers the high bit of an address. The Linux kernel
relies on it, and it is the only way to write assembler
code which can run when loaded at a location 0x80000000
away from the location at which it is linked. */
if (howto->bitsize + rightshift
== bfd_arch_bits_per_address (input_bfd))
break;
sum = a + b;
if (sum < a || (sum & ~ fieldmask) != 0)
{
/* There was a carry out, or the field overflow. Test
for signed operands again. Here is the overflow test
is as for complain_overflow_signed. */
if (((~ (a ^ b)) & (a ^ sum)) & signmask)
overflow = true;
}
break;
default:
abort ();
}
}
/* Put RELOCATION in the right bits. */
relocation >>= (bfd_vma) rightshift;
relocation <<= (bfd_vma) bitpos;
/* Add RELOCATION to the right bits of X. */
x = ((x & ~howto->dst_mask)
| (((x & howto->src_mask) + relocation) & howto->dst_mask));
/* Put the relocated value back in the object file. */
switch (size)
{
default:
case 0:
abort ();
case 1:
bfd_put_8 (input_bfd, x, location);
break;
case 2:
bfd_put_16 (input_bfd, x, location);
break;
case 4:
bfd_put_32 (input_bfd, x, location);
break;
case 8:
#ifdef BFD64
bfd_put_64 (input_bfd, x, location);
#else
abort ();
#endif
break;
}
return overflow ? bfd_reloc_overflow : bfd_reloc_ok;
}
/*
DOCDD
INODE
howto manager, , typedef arelent, Relocations
SECTION
The howto manager
When an application wants to create a relocation, but doesn't
know what the target machine might call it, it can find out by
using this bit of code.
*/
/*
TYPEDEF
bfd_reloc_code_type
DESCRIPTION
The insides of a reloc code. The idea is that, eventually, there
will be one enumerator for every type of relocation we ever do.
Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
return a howto pointer.
This does mean that the application must determine the correct
enumerator value; you can't get a howto pointer from a random set
of attributes.
SENUM
bfd_reloc_code_real
ENUM
BFD_RELOC_64
ENUMX
BFD_RELOC_32
ENUMX
BFD_RELOC_26
ENUMX
BFD_RELOC_24
ENUMX
BFD_RELOC_16
ENUMX
BFD_RELOC_14
ENUMX
BFD_RELOC_8
ENUMDOC
Basic absolute relocations of N bits.
ENUM
BFD_RELOC_64_PCREL
ENUMX
BFD_RELOC_32_PCREL
ENUMX
BFD_RELOC_24_PCREL
ENUMX
BFD_RELOC_16_PCREL
ENUMX
BFD_RELOC_12_PCREL
ENUMX
BFD_RELOC_8_PCREL
ENUMDOC
PC-relative relocations. Sometimes these are relative to the address
of the relocation itself; sometimes they are relative to the start of
the section containing the relocation. It depends on the specific target.
The 24-bit relocation is used in some Intel 960 configurations.
ENUM
BFD_RELOC_32_GOT_PCREL
ENUMX
BFD_RELOC_16_GOT_PCREL
ENUMX
BFD_RELOC_8_GOT_PCREL
ENUMX
BFD_RELOC_32_GOTOFF
ENUMX
BFD_RELOC_16_GOTOFF
ENUMX
BFD_RELOC_LO16_GOTOFF
ENUMX
BFD_RELOC_HI16_GOTOFF
ENUMX
BFD_RELOC_HI16_S_GOTOFF
ENUMX
BFD_RELOC_8_GOTOFF
ENUMX
BFD_RELOC_32_PLT_PCREL
ENUMX
BFD_RELOC_24_PLT_PCREL
ENUMX
BFD_RELOC_16_PLT_PCREL
ENUMX
BFD_RELOC_8_PLT_PCREL
ENUMX
BFD_RELOC_32_PLTOFF
ENUMX
BFD_RELOC_16_PLTOFF
ENUMX
BFD_RELOC_LO16_PLTOFF
ENUMX
BFD_RELOC_HI16_PLTOFF
ENUMX
BFD_RELOC_HI16_S_PLTOFF
ENUMX
BFD_RELOC_8_PLTOFF
ENUMDOC
For ELF.
ENUM
BFD_RELOC_68K_GLOB_DAT
ENUMX
BFD_RELOC_68K_JMP_SLOT
ENUMX
BFD_RELOC_68K_RELATIVE
ENUMDOC
Relocations used by 68K ELF.
ENUM
BFD_RELOC_32_BASEREL
ENUMX
BFD_RELOC_16_BASEREL
ENUMX
BFD_RELOC_LO16_BASEREL
ENUMX
BFD_RELOC_HI16_BASEREL
ENUMX
BFD_RELOC_HI16_S_BASEREL
ENUMX
BFD_RELOC_8_BASEREL
ENUMX
BFD_RELOC_RVA
ENUMDOC
Linkage-table relative.
ENUM
BFD_RELOC_8_FFnn
ENUMDOC
Absolute 8-bit relocation, but used to form an address like 0xFFnn.
ENUM
BFD_RELOC_32_PCREL_S2
ENUMX
BFD_RELOC_16_PCREL_S2
ENUMX
BFD_RELOC_23_PCREL_S2
ENUMDOC
These PC-relative relocations are stored as word displacements --
i.e., byte displacements shifted right two bits. The 30-bit word
displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
SPARC. (SPARC tools generally refer to this as <<WDISP30>>.) The
signed 16-bit displacement is used on the MIPS, and the 23-bit
displacement is used on the Alpha.
ENUM
BFD_RELOC_HI22
ENUMX
BFD_RELOC_LO10
ENUMDOC
High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
the target word. These are used on the SPARC.
ENUM
BFD_RELOC_GPREL16
ENUMX
BFD_RELOC_GPREL32
ENUMDOC
For systems that allocate a Global Pointer register, these are
displacements off that register. These relocation types are
handled specially, because the value the register will have is
decided relatively late.
ENUM
BFD_RELOC_I960_CALLJ
ENUMDOC
Reloc types used for i960/b.out.
ENUM
BFD_RELOC_NONE
ENUMX
BFD_RELOC_SPARC_WDISP22
ENUMX
BFD_RELOC_SPARC22
ENUMX
BFD_RELOC_SPARC13
ENUMX
BFD_RELOC_SPARC_GOT10
ENUMX
BFD_RELOC_SPARC_GOT13
ENUMX
BFD_RELOC_SPARC_GOT22
ENUMX
BFD_RELOC_SPARC_PC10
ENUMX
BFD_RELOC_SPARC_PC22
ENUMX
BFD_RELOC_SPARC_WPLT30
ENUMX
BFD_RELOC_SPARC_COPY
ENUMX
BFD_RELOC_SPARC_GLOB_DAT
ENUMX
BFD_RELOC_SPARC_JMP_SLOT
ENUMX
BFD_RELOC_SPARC_RELATIVE
ENUMX
BFD_RELOC_SPARC_UA32
ENUMDOC
SPARC ELF relocations. There is probably some overlap with other
relocation types already defined.
ENUM
BFD_RELOC_SPARC_BASE13
ENUMX
BFD_RELOC_SPARC_BASE22
ENUMDOC
I think these are specific to SPARC a.out (e.g., Sun 4).
ENUMEQ
BFD_RELOC_SPARC_64
BFD_RELOC_64
ENUMX
BFD_RELOC_SPARC_10
ENUMX
BFD_RELOC_SPARC_11
ENUMX
BFD_RELOC_SPARC_OLO10
ENUMX
BFD_RELOC_SPARC_HH22
ENUMX
BFD_RELOC_SPARC_HM10
ENUMX
BFD_RELOC_SPARC_LM22
ENUMX
BFD_RELOC_SPARC_PC_HH22
ENUMX
BFD_RELOC_SPARC_PC_HM10
ENUMX
BFD_RELOC_SPARC_PC_LM22
ENUMX
BFD_RELOC_SPARC_WDISP16
ENUMX
BFD_RELOC_SPARC_WDISP19
ENUMX
BFD_RELOC_SPARC_7
ENUMX
BFD_RELOC_SPARC_6
ENUMX
BFD_RELOC_SPARC_5
ENUMEQX
BFD_RELOC_SPARC_DISP64
BFD_RELOC_64_PCREL
ENUMX
BFD_RELOC_SPARC_PLT64
ENUMX
BFD_RELOC_SPARC_HIX22
ENUMX
BFD_RELOC_SPARC_LOX10
ENUMX
BFD_RELOC_SPARC_H44
ENUMX
BFD_RELOC_SPARC_M44
ENUMX
BFD_RELOC_SPARC_L44
ENUMX
BFD_RELOC_SPARC_REGISTER
ENUMDOC
SPARC64 relocations
ENUM
BFD_RELOC_SPARC_REV32
ENUMDOC
SPARC little endian relocation
ENUM
BFD_RELOC_ALPHA_GPDISP_HI16
ENUMDOC
Alpha ECOFF and ELF relocations. Some of these treat the symbol or
"addend" in some special way.
For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
writing; when reading, it will be the absolute section symbol. The
addend is the displacement in bytes of the "lda" instruction from
the "ldah" instruction (which is at the address of this reloc).
ENUM
BFD_RELOC_ALPHA_GPDISP_LO16
ENUMDOC
For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
with GPDISP_HI16 relocs. The addend is ignored when writing the
relocations out, and is filled in with the file's GP value on
reading, for convenience.
ENUM
BFD_RELOC_ALPHA_GPDISP
ENUMDOC
The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
relocation except that there is no accompanying GPDISP_LO16
relocation.
ENUM
BFD_RELOC_ALPHA_LITERAL
ENUMX
BFD_RELOC_ALPHA_ELF_LITERAL
ENUMX
BFD_RELOC_ALPHA_LITUSE
ENUMDOC
The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
the assembler turns it into a LDQ instruction to load the address of
the symbol, and then fills in a register in the real instruction.
The LITERAL reloc, at the LDQ instruction, refers to the .lita
section symbol. The addend is ignored when writing, but is filled
in with the file's GP value on reading, for convenience, as with the
GPDISP_LO16 reloc.
The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
It should refer to the symbol to be referenced, as with 16_GOTOFF,
but it generates output not based on the position within the .got
section, but relative to the GP value chosen for the file during the
final link stage.
The LITUSE reloc, on the instruction using the loaded address, gives
information to the linker that it might be able to use to optimize
away some literal section references. The symbol is ignored (read
as the absolute section symbol), and the "addend" indicates the type
of instruction using the register:
1 - "memory" fmt insn
2 - byte-manipulation (byte offset reg)
3 - jsr (target of branch)
The GNU linker currently doesn't do any of this optimizing.
ENUM
BFD_RELOC_ALPHA_USER_LITERAL
ENUMX
BFD_RELOC_ALPHA_USER_LITUSE_BASE
ENUMX
BFD_RELOC_ALPHA_USER_LITUSE_BYTOFF
ENUMX
BFD_RELOC_ALPHA_USER_LITUSE_JSR
ENUMX
BFD_RELOC_ALPHA_USER_GPDISP
ENUMX
BFD_RELOC_ALPHA_USER_GPRELHIGH
ENUMX
BFD_RELOC_ALPHA_USER_GPRELLOW
ENUMDOC
The BFD_RELOC_ALPHA_USER_* relocations are used by the assembler to
process the explicit !<reloc>!sequence relocations, and are mapped
into the normal relocations at the end of processing.
ENUM
BFD_RELOC_ALPHA_HINT
ENUMDOC
The HINT relocation indicates a value that should be filled into the
"hint" field of a jmp/jsr/ret instruction, for possible branch-
prediction logic which may be provided on some processors.
ENUM
BFD_RELOC_ALPHA_LINKAGE
ENUMDOC
The LINKAGE relocation outputs a linkage pair in the object file,
which is filled by the linker.
ENUM
BFD_RELOC_ALPHA_CODEADDR
ENUMDOC
The CODEADDR relocation outputs a STO_CA in the object file,
which is filled by the linker.
ENUM
BFD_RELOC_MIPS_JMP
ENUMDOC
Bits 27..2 of the relocation address shifted right 2 bits;
simple reloc otherwise.
ENUM
BFD_RELOC_MIPS16_JMP
ENUMDOC
The MIPS16 jump instruction.
ENUM
BFD_RELOC_MIPS16_GPREL
ENUMDOC
MIPS16 GP relative reloc.
ENUM
BFD_RELOC_HI16
ENUMDOC
High 16 bits of 32-bit value; simple reloc.
ENUM
BFD_RELOC_HI16_S
ENUMDOC
High 16 bits of 32-bit value but the low 16 bits will be sign
extended and added to form the final result. If the low 16
bits form a negative number, we need to add one to the high value
to compensate for the borrow when the low bits are added.
ENUM
BFD_RELOC_LO16
ENUMDOC
Low 16 bits.
ENUM
BFD_RELOC_PCREL_HI16_S
ENUMDOC
Like BFD_RELOC_HI16_S, but PC relative.
ENUM
BFD_RELOC_PCREL_LO16
ENUMDOC
Like BFD_RELOC_LO16, but PC relative.
ENUMEQ
BFD_RELOC_MIPS_GPREL
BFD_RELOC_GPREL16
ENUMDOC
Relocation relative to the global pointer.
ENUM
BFD_RELOC_MIPS_LITERAL
ENUMDOC
Relocation against a MIPS literal section.
ENUM
BFD_RELOC_MIPS_GOT16
ENUMX
BFD_RELOC_MIPS_CALL16
ENUMEQX
BFD_RELOC_MIPS_GPREL32
BFD_RELOC_GPREL32
ENUMX
BFD_RELOC_MIPS_GOT_HI16
ENUMX
BFD_RELOC_MIPS_GOT_LO16
ENUMX
BFD_RELOC_MIPS_CALL_HI16
ENUMX
BFD_RELOC_MIPS_CALL_LO16
ENUMX
BFD_RELOC_MIPS_SUB
ENUMX
BFD_RELOC_MIPS_GOT_PAGE
ENUMX
BFD_RELOC_MIPS_GOT_OFST
ENUMX
BFD_RELOC_MIPS_GOT_DISP
COMMENT
ENUMDOC
MIPS ELF relocations.
COMMENT
ENUM
BFD_RELOC_386_GOT32
ENUMX
BFD_RELOC_386_PLT32
ENUMX
BFD_RELOC_386_COPY
ENUMX
BFD_RELOC_386_GLOB_DAT
ENUMX
BFD_RELOC_386_JUMP_SLOT
ENUMX
BFD_RELOC_386_RELATIVE
ENUMX
BFD_RELOC_386_GOTOFF
ENUMX
BFD_RELOC_386_GOTPC
ENUMDOC
i386/elf relocations
ENUM
BFD_RELOC_NS32K_IMM_8
ENUMX
BFD_RELOC_NS32K_IMM_16
ENUMX
BFD_RELOC_NS32K_IMM_32
ENUMX
BFD_RELOC_NS32K_IMM_8_PCREL
ENUMX
BFD_RELOC_NS32K_IMM_16_PCREL
ENUMX
BFD_RELOC_NS32K_IMM_32_PCREL
ENUMX
BFD_RELOC_NS32K_DISP_8
ENUMX
BFD_RELOC_NS32K_DISP_16
ENUMX
BFD_RELOC_NS32K_DISP_32
ENUMX
BFD_RELOC_NS32K_DISP_8_PCREL
ENUMX
BFD_RELOC_NS32K_DISP_16_PCREL
ENUMX
BFD_RELOC_NS32K_DISP_32_PCREL
ENUMDOC
ns32k relocations
ENUM
BFD_RELOC_PJ_CODE_HI16
ENUMX
BFD_RELOC_PJ_CODE_LO16
ENUMX
BFD_RELOC_PJ_CODE_DIR16
ENUMX
BFD_RELOC_PJ_CODE_DIR32
ENUMX
BFD_RELOC_PJ_CODE_REL16
ENUMX
BFD_RELOC_PJ_CODE_REL32
ENUMDOC
Picojava relocs. Not all of these appear in object files.
ENUM
BFD_RELOC_PPC_B26
ENUMX
BFD_RELOC_PPC_BA26
ENUMX
BFD_RELOC_PPC_TOC16
ENUMX
BFD_RELOC_PPC_B16
ENUMX
BFD_RELOC_PPC_B16_BRTAKEN
ENUMX
BFD_RELOC_PPC_B16_BRNTAKEN
ENUMX
BFD_RELOC_PPC_BA16
ENUMX
BFD_RELOC_PPC_BA16_BRTAKEN
ENUMX
BFD_RELOC_PPC_BA16_BRNTAKEN
ENUMX
BFD_RELOC_PPC_COPY
ENUMX
BFD_RELOC_PPC_GLOB_DAT
ENUMX
BFD_RELOC_PPC_JMP_SLOT
ENUMX
BFD_RELOC_PPC_RELATIVE
ENUMX
BFD_RELOC_PPC_LOCAL24PC
ENUMX
BFD_RELOC_PPC_EMB_NADDR32
ENUMX
BFD_RELOC_PPC_EMB_NADDR16
ENUMX
BFD_RELOC_PPC_EMB_NADDR16_LO
ENUMX
BFD_RELOC_PPC_EMB_NADDR16_HI
ENUMX
BFD_RELOC_PPC_EMB_NADDR16_HA
ENUMX
BFD_RELOC_PPC_EMB_SDAI16
ENUMX
BFD_RELOC_PPC_EMB_SDA2I16
ENUMX
BFD_RELOC_PPC_EMB_SDA2REL
ENUMX
BFD_RELOC_PPC_EMB_SDA21
ENUMX
BFD_RELOC_PPC_EMB_MRKREF
ENUMX
BFD_RELOC_PPC_EMB_RELSEC16
ENUMX
BFD_RELOC_PPC_EMB_RELST_LO
ENUMX
BFD_RELOC_PPC_EMB_RELST_HI
ENUMX
BFD_RELOC_PPC_EMB_RELST_HA
ENUMX
BFD_RELOC_PPC_EMB_BIT_FLD
ENUMX
BFD_RELOC_PPC_EMB_RELSDA
ENUMDOC
Power(rs6000) and PowerPC relocations.
ENUM
BFD_RELOC_CTOR
ENUMDOC
The type of reloc used to build a contructor table - at the moment
probably a 32 bit wide absolute relocation, but the target can choose.
It generally does map to one of the other relocation types.
ENUM
BFD_RELOC_ARM_PCREL_BRANCH
ENUMDOC
ARM 26 bit pc-relative branch. The lowest two bits must be zero and are
not stored in the instruction.
ENUM
BFD_RELOC_ARM_IMMEDIATE
ENUMX
BFD_RELOC_ARM_ADRL_IMMEDIATE
ENUMX
BFD_RELOC_ARM_OFFSET_IMM
ENUMX
BFD_RELOC_ARM_SHIFT_IMM
ENUMX
BFD_RELOC_ARM_SWI
ENUMX
BFD_RELOC_ARM_MULTI
ENUMX
BFD_RELOC_ARM_CP_OFF_IMM
ENUMX
BFD_RELOC_ARM_ADR_IMM
ENUMX
BFD_RELOC_ARM_LDR_IMM
ENUMX
BFD_RELOC_ARM_LITERAL
ENUMX
BFD_RELOC_ARM_IN_POOL
ENUMX
BFD_RELOC_ARM_OFFSET_IMM8
ENUMX
BFD_RELOC_ARM_HWLITERAL
ENUMX
BFD_RELOC_ARM_THUMB_ADD
ENUMX
BFD_RELOC_ARM_THUMB_IMM
ENUMX
BFD_RELOC_ARM_THUMB_SHIFT
ENUMX
BFD_RELOC_ARM_THUMB_OFFSET
ENUMX
BFD_RELOC_ARM_GOT12
ENUMX
BFD_RELOC_ARM_GOT32
ENUMX
BFD_RELOC_ARM_JUMP_SLOT
ENUMX
BFD_RELOC_ARM_COPY
ENUMX
BFD_RELOC_ARM_GLOB_DAT
ENUMX
BFD_RELOC_ARM_PLT32
ENUMX
BFD_RELOC_ARM_RELATIVE
ENUMX
BFD_RELOC_ARM_GOTOFF
ENUMX
BFD_RELOC_ARM_GOTPC
ENUMDOC
These relocs are only used within the ARM assembler. They are not
(at present) written to any object files.
ENUM
BFD_RELOC_SH_PCDISP8BY2
ENUMX
BFD_RELOC_SH_PCDISP12BY2
ENUMX
BFD_RELOC_SH_IMM4
ENUMX
BFD_RELOC_SH_IMM4BY2
ENUMX
BFD_RELOC_SH_IMM4BY4
ENUMX
BFD_RELOC_SH_IMM8
ENUMX
BFD_RELOC_SH_IMM8BY2
ENUMX
BFD_RELOC_SH_IMM8BY4
ENUMX
BFD_RELOC_SH_PCRELIMM8BY2
ENUMX
BFD_RELOC_SH_PCRELIMM8BY4
ENUMX
BFD_RELOC_SH_SWITCH16
ENUMX
BFD_RELOC_SH_SWITCH32
ENUMX
BFD_RELOC_SH_USES
ENUMX
BFD_RELOC_SH_COUNT
ENUMX
BFD_RELOC_SH_ALIGN
ENUMX
BFD_RELOC_SH_CODE
ENUMX
BFD_RELOC_SH_DATA
ENUMX
BFD_RELOC_SH_LABEL
ENUMDOC
Hitachi SH relocs. Not all of these appear in object files.
ENUM
BFD_RELOC_THUMB_PCREL_BRANCH9
ENUMX
BFD_RELOC_THUMB_PCREL_BRANCH12
ENUMX
BFD_RELOC_THUMB_PCREL_BRANCH23
ENUMDOC
Thumb 23-, 12- and 9-bit pc-relative branches. The lowest bit must
be zero and is not stored in the instruction.
ENUM
BFD_RELOC_ARC_B22_PCREL
ENUMDOC
Argonaut RISC Core (ARC) relocs.
ARC 22 bit pc-relative branch. The lowest two bits must be zero and are
not stored in the instruction. The high 20 bits are installed in bits 26
through 7 of the instruction.
ENUM
BFD_RELOC_ARC_B26
ENUMDOC
ARC 26 bit absolute branch. The lowest two bits must be zero and are not
stored in the instruction. The high 24 bits are installed in bits 23
through 0.
ENUM
BFD_RELOC_D10V_10_PCREL_R
ENUMDOC
Mitsubishi D10V relocs.
This is a 10-bit reloc with the right 2 bits
assumed to be 0.
ENUM
BFD_RELOC_D10V_10_PCREL_L
ENUMDOC
Mitsubishi D10V relocs.
This is a 10-bit reloc with the right 2 bits
assumed to be 0. This is the same as the previous reloc
except it is in the left container, i.e.,
shifted left 15 bits.
ENUM
BFD_RELOC_D10V_18
ENUMDOC
This is an 18-bit reloc with the right 2 bits
assumed to be 0.
ENUM
BFD_RELOC_D10V_18_PCREL
ENUMDOC
This is an 18-bit reloc with the right 2 bits
assumed to be 0.
ENUM
BFD_RELOC_D30V_6
ENUMDOC
Mitsubishi D30V relocs.
This is a 6-bit absolute reloc.
ENUM
BFD_RELOC_D30V_9_PCREL
ENUMDOC
This is a 6-bit pc-relative reloc with
the right 3 bits assumed to be 0.
ENUM
BFD_RELOC_D30V_9_PCREL_R
ENUMDOC
This is a 6-bit pc-relative reloc with
the right 3 bits assumed to be 0. Same
as the previous reloc but on the right side
of the container.
ENUM
BFD_RELOC_D30V_15
ENUMDOC
This is a 12-bit absolute reloc with the
right 3 bitsassumed to be 0.
ENUM
BFD_RELOC_D30V_15_PCREL
ENUMDOC
This is a 12-bit pc-relative reloc with
the right 3 bits assumed to be 0.
ENUM
BFD_RELOC_D30V_15_PCREL_R
ENUMDOC
This is a 12-bit pc-relative reloc with
the right 3 bits assumed to be 0. Same
as the previous reloc but on the right side
of the container.
ENUM
BFD_RELOC_D30V_21
ENUMDOC
This is an 18-bit absolute reloc with
the right 3 bits assumed to be 0.
ENUM
BFD_RELOC_D30V_21_PCREL
ENUMDOC
This is an 18-bit pc-relative reloc with
the right 3 bits assumed to be 0.
ENUM
BFD_RELOC_D30V_21_PCREL_R
ENUMDOC
This is an 18-bit pc-relative reloc with
the right 3 bits assumed to be 0. Same
as the previous reloc but on the right side
of the container.
ENUM
BFD_RELOC_D30V_32
ENUMDOC
This is a 32-bit absolute reloc.
ENUM
BFD_RELOC_D30V_32_PCREL
ENUMDOC
This is a 32-bit pc-relative reloc.
ENUM
BFD_RELOC_M32R_24
ENUMDOC
Mitsubishi M32R relocs.
This is a 24 bit absolute address.
ENUM
BFD_RELOC_M32R_10_PCREL
ENUMDOC
This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
ENUM
BFD_RELOC_M32R_18_PCREL
ENUMDOC
This is an 18-bit reloc with the right 2 bits assumed to be 0.
ENUM
BFD_RELOC_M32R_26_PCREL
ENUMDOC
This is a 26-bit reloc with the right 2 bits assumed to be 0.
ENUM
BFD_RELOC_M32R_HI16_ULO
ENUMDOC
This is a 16-bit reloc containing the high 16 bits of an address
used when the lower 16 bits are treated as unsigned.
ENUM
BFD_RELOC_M32R_HI16_SLO
ENUMDOC
This is a 16-bit reloc containing the high 16 bits of an address
used when the lower 16 bits are treated as signed.
ENUM
BFD_RELOC_M32R_LO16
ENUMDOC
This is a 16-bit reloc containing the lower 16 bits of an address.
ENUM
BFD_RELOC_M32R_SDA16
ENUMDOC
This is a 16-bit reloc containing the small data area offset for use in
add3, load, and store instructions.
ENUM
BFD_RELOC_V850_9_PCREL
ENUMDOC
This is a 9-bit reloc
ENUM
BFD_RELOC_V850_22_PCREL
ENUMDOC
This is a 22-bit reloc
ENUM
BFD_RELOC_V850_SDA_16_16_OFFSET
ENUMDOC
This is a 16 bit offset from the short data area pointer.
ENUM
BFD_RELOC_V850_SDA_15_16_OFFSET
ENUMDOC
This is a 16 bit offset (of which only 15 bits are used) from the
short data area pointer.
ENUM
BFD_RELOC_V850_ZDA_16_16_OFFSET
ENUMDOC
This is a 16 bit offset from the zero data area pointer.
ENUM
BFD_RELOC_V850_ZDA_15_16_OFFSET
ENUMDOC
This is a 16 bit offset (of which only 15 bits are used) from the
zero data area pointer.
ENUM
BFD_RELOC_V850_TDA_6_8_OFFSET
ENUMDOC
This is an 8 bit offset (of which only 6 bits are used) from the
tiny data area pointer.
ENUM
BFD_RELOC_V850_TDA_7_8_OFFSET
ENUMDOC
This is an 8bit offset (of which only 7 bits are used) from the tiny
data area pointer.
ENUM
BFD_RELOC_V850_TDA_7_7_OFFSET
ENUMDOC
This is a 7 bit offset from the tiny data area pointer.
ENUM
BFD_RELOC_V850_TDA_16_16_OFFSET
ENUMDOC
This is a 16 bit offset from the tiny data area pointer.
COMMENT
ENUM
BFD_RELOC_V850_TDA_4_5_OFFSET
ENUMDOC
This is a 5 bit offset (of which only 4 bits are used) from the tiny
data area pointer.
ENUM
BFD_RELOC_V850_TDA_4_4_OFFSET
ENUMDOC
This is a 4 bit offset from the tiny data area pointer.
ENUM
BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
ENUMDOC
This is a 16 bit offset from the short data area pointer, with the
bits placed non-contigously in the instruction.
ENUM
BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
ENUMDOC
This is a 16 bit offset from the zero data area pointer, with the
bits placed non-contigously in the instruction.
ENUM
BFD_RELOC_V850_CALLT_6_7_OFFSET
ENUMDOC
This is a 6 bit offset from the call table base pointer.
ENUM
BFD_RELOC_V850_CALLT_16_16_OFFSET
ENUMDOC
This is a 16 bit offset from the call table base pointer.
COMMENT
ENUM
BFD_RELOC_MN10300_32_PCREL
ENUMDOC
This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
instruction.
ENUM
BFD_RELOC_MN10300_16_PCREL
ENUMDOC
This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
instruction.
ENUM
BFD_RELOC_TIC30_LDP
ENUMDOC
This is a 8bit DP reloc for the tms320c30, where the most
significant 8 bits of a 24 bit word are placed into the least
significant 8 bits of the opcode.
ENUM
BFD_RELOC_FR30_48
ENUMDOC
This is a 48 bit reloc for the FR30 that stores 32 bits.
ENUM
BFD_RELOC_FR30_20
ENUMDOC
This is a 32 bit reloc for the FR30 that stores 20 bits split up into
two sections.
ENUM
BFD_RELOC_FR30_6_IN_4
ENUMDOC
This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
4 bits.
ENUM
BFD_RELOC_FR30_8_IN_8
ENUMDOC
This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
into 8 bits.
ENUM
BFD_RELOC_FR30_9_IN_8
ENUMDOC
This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
into 8 bits.
ENUM
BFD_RELOC_FR30_10_IN_8
ENUMDOC
This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
into 8 bits.
ENUM
BFD_RELOC_FR30_9_PCREL
ENUMDOC
This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
short offset into 8 bits.
ENUM
BFD_RELOC_FR30_12_PCREL
ENUMDOC
This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
short offset into 11 bits.
ENUM
BFD_RELOC_MCORE_PCREL_IMM8BY4
ENUMX
BFD_RELOC_MCORE_PCREL_IMM11BY2
ENUMX
BFD_RELOC_MCORE_PCREL_IMM4BY2
ENUMX
BFD_RELOC_MCORE_PCREL_32
ENUMX
BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
ENUMX
BFD_RELOC_MCORE_RVA
ENUMDOC
Motorola Mcore relocations.
ENUM
BFD_RELOC_VTABLE_INHERIT
ENUMX
BFD_RELOC_VTABLE_ENTRY
ENUMDOC
These two relocations are used by the linker to determine which of
the entries in a C++ virtual function table are actually used. When
the --gc-sections option is given, the linker will zero out the entries
that are not used, so that the code for those functions need not be
included in the output.
VTABLE_INHERIT is a zero-space relocation used to describe to the
linker the inheritence tree of a C++ virtual function table. The
relocation's symbol should be the parent class' vtable, and the
relocation should be located at the child vtable.
VTABLE_ENTRY is a zero-space relocation that describes the use of a
virtual function table entry. The reloc's symbol should refer to the
table of the class mentioned in the code. Off of that base, an offset
describes the entry that is being used. For Rela hosts, this offset
is stored in the reloc's addend. For Rel hosts, we are forced to put
this offset in the reloc's section offset.
ENDSENUM
BFD_RELOC_UNUSED
CODE_FRAGMENT
.
.typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
*/
/*
FUNCTION
bfd_reloc_type_lookup
SYNOPSIS
reloc_howto_type *
bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code);
DESCRIPTION
Return a pointer to a howto structure which, when
invoked, will perform the relocation @var{code} on data from the
architecture noted.
*/
reloc_howto_type *
bfd_reloc_type_lookup (abfd, code)
bfd *abfd;
bfd_reloc_code_real_type code;
{
return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
}
static reloc_howto_type bfd_howto_32 =
HOWTO (0, 00, 2, 32, false, 0, complain_overflow_bitfield, 0, "VRT32", false, 0xffffffff, 0xffffffff, true);
/*
INTERNAL_FUNCTION
bfd_default_reloc_type_lookup
SYNOPSIS
reloc_howto_type *bfd_default_reloc_type_lookup
(bfd *abfd, bfd_reloc_code_real_type code);
DESCRIPTION
Provides a default relocation lookup routine for any architecture.
*/
reloc_howto_type *
bfd_default_reloc_type_lookup (abfd, code)
bfd *abfd;
bfd_reloc_code_real_type code;
{
switch (code)
{
case BFD_RELOC_CTOR:
/* The type of reloc used in a ctor, which will be as wide as the
address - so either a 64, 32, or 16 bitter. */
switch (bfd_get_arch_info (abfd)->bits_per_address)
{
case 64:
BFD_FAIL ();
case 32:
return &bfd_howto_32;
case 16:
BFD_FAIL ();
default:
BFD_FAIL ();
}
default:
BFD_FAIL ();
}
return (reloc_howto_type *) NULL;
}
/*
FUNCTION
bfd_get_reloc_code_name
SYNOPSIS
const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
DESCRIPTION
Provides a printable name for the supplied relocation code.
Useful mainly for printing error messages.
*/
const char *
bfd_get_reloc_code_name (code)
bfd_reloc_code_real_type code;
{
if (code > BFD_RELOC_UNUSED)
return 0;
return bfd_reloc_code_real_names[(int)code];
}
/*
INTERNAL_FUNCTION
bfd_generic_relax_section
SYNOPSIS
boolean bfd_generic_relax_section
(bfd *abfd,
asection *section,
struct bfd_link_info *,
boolean *);
DESCRIPTION
Provides default handling for relaxing for back ends which
don't do relaxing -- i.e., does nothing.
*/
/*ARGSUSED*/
boolean
bfd_generic_relax_section (abfd, section, link_info, again)
bfd *abfd ATTRIBUTE_UNUSED;
asection *section ATTRIBUTE_UNUSED;
struct bfd_link_info *link_info ATTRIBUTE_UNUSED;
boolean *again;
{
*again = false;
return true;
}
/*
INTERNAL_FUNCTION
bfd_generic_gc_sections
SYNOPSIS
boolean bfd_generic_gc_sections
(bfd *, struct bfd_link_info *);
DESCRIPTION
Provides default handling for relaxing for back ends which
don't do section gc -- i.e., does nothing.
*/
/*ARGSUSED*/
boolean
bfd_generic_gc_sections (abfd, link_info)
bfd *abfd ATTRIBUTE_UNUSED;
struct bfd_link_info *link_info ATTRIBUTE_UNUSED;
{
return true;
}
/*
INTERNAL_FUNCTION
bfd_generic_get_relocated_section_contents
SYNOPSIS
bfd_byte *
bfd_generic_get_relocated_section_contents (bfd *abfd,
struct bfd_link_info *link_info,
struct bfd_link_order *link_order,
bfd_byte *data,
boolean relocateable,
asymbol **symbols);
DESCRIPTION
Provides default handling of relocation effort for back ends
which can't be bothered to do it efficiently.
*/
bfd_byte *
bfd_generic_get_relocated_section_contents (abfd, link_info, link_order, data,
relocateable, symbols)
bfd *abfd;
struct bfd_link_info *link_info;
struct bfd_link_order *link_order;
bfd_byte *data;
boolean relocateable;
asymbol **symbols;
{
/* Get enough memory to hold the stuff */
bfd *input_bfd = link_order->u.indirect.section->owner;
asection *input_section = link_order->u.indirect.section;
long reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
arelent **reloc_vector = NULL;
long reloc_count;
if (reloc_size < 0)
goto error_return;
reloc_vector = (arelent **) bfd_malloc ((size_t) reloc_size);
if (reloc_vector == NULL && reloc_size != 0)
goto error_return;
/* read in the section */
if (!bfd_get_section_contents (input_bfd,
input_section,
(PTR) data,
0,
input_section->_raw_size))
goto error_return;
/* We're not relaxing the section, so just copy the size info */
input_section->_cooked_size = input_section->_raw_size;
input_section->reloc_done = true;
reloc_count = bfd_canonicalize_reloc (input_bfd,
input_section,
reloc_vector,
symbols);
if (reloc_count < 0)
goto error_return;
if (reloc_count > 0)
{
arelent **parent;
for (parent = reloc_vector; *parent != (arelent *) NULL;
parent++)
{
char *error_message = (char *) NULL;
bfd_reloc_status_type r =
bfd_perform_relocation (input_bfd,
*parent,
(PTR) data,
input_section,
relocateable ? abfd : (bfd *) NULL,
&error_message);
if (relocateable)
{
asection *os = input_section->output_section;
/* A partial link, so keep the relocs */
os->orelocation[os->reloc_count] = *parent;
os->reloc_count++;
}
if (r != bfd_reloc_ok)
{
switch (r)
{
case bfd_reloc_undefined:
if (!((*link_info->callbacks->undefined_symbol)
(link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
input_bfd, input_section, (*parent)->address)))
goto error_return;
break;
case bfd_reloc_dangerous:
BFD_ASSERT (error_message != (char *) NULL);
if (!((*link_info->callbacks->reloc_dangerous)
(link_info, error_message, input_bfd, input_section,
(*parent)->address)))
goto error_return;
break;
case bfd_reloc_overflow:
if (!((*link_info->callbacks->reloc_overflow)
(link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
(*parent)->howto->name, (*parent)->addend,
input_bfd, input_section, (*parent)->address)))
goto error_return;
break;
case bfd_reloc_outofrange:
default:
abort ();
break;
}
}
}
}
if (reloc_vector != NULL)
free (reloc_vector);
return data;
error_return:
if (reloc_vector != NULL)
free (reloc_vector);
return NULL;
}
Reference in New Issue View Git Blame Copy Permalink