2
0
mirror of https://sourceware.org/git/binutils-gdb.git synced 2024-12-09 04:21:49 +08:00
binutils-gdb/config/lib-ld.m4
Alan Modra 67d1991b78 egrep in binutils
Apparently some distros have a nagging egrep that helpfully tells you
egrep is deprecated and to use "grep -E".  The nag message causes a ld
testsuite failure.  What's more the advice isn't that good.  The "-E"
flag may not be available with older versions of grep.

This patch fixes bare invocation of egrep within binutils, replacing
it with the autoconf $EGREP or with grep.

config/
	* lib-ld.m4 (AC_LIB_PROG_LD_GNU): Require AC_PROG_EGREP and
	invoke $EGREP.
	(AC_LIB_PROG_LD): Likewise.
binutils/
	* configure: Regenerate.
	* embedspu.sh: Replace egrep with grep.
gold/
	* testsuite/Makefile.am (flagstest_compress_debug_sections.check):
	Replace egrep with grep.
	* testsuite/Makefile.in: Regenerate.
	* testsuite/bnd_ifunc_1.sh: Replace egrep with $EGREP.
	* testsuite/bnd_ifunc_2.sh: Likewise.
	* testsuite/bnd_plt_1.sh: Likewise.
	* testsuite/discard_locals_test.sh: Likewise.
	* testsuite/gnu_property_test.sh: Likewise.
	* testsuite/no_version_test.sh: Likewise.
	* testsuite/pr18689.sh: Likewise.
	* testsuite/pr26936.sh: Likewise.
	* testsuite/retain.sh: Likewise.
	* testsuite/split_i386.sh: Likewise.
	* testsuite/split_s390.sh: Likewise.
	* testsuite/split_x32.sh: Likewise.
	* testsuite/split_x86_64.sh: Likewise.
	* testsuite/ver_test_pr16504.sh: Likewise.
intl/
	* configure: Regenerate.
ld/
	* testsuite/ld-elfvers/vers.exp (test_ar): Replace egrep with grep.
2022-09-28 13:37:31 +09:30

113 lines
3.5 KiB
Plaintext

# lib-ld.m4 serial 2 (gettext-0.12)
dnl Copyright (C) 1996-2003 Free Software Foundation, Inc.
dnl This file is free software, distributed under the terms of the GNU
dnl General Public License. As a special exception to the GNU General
dnl Public License, this file may be distributed as part of a program
dnl that contains a configuration script generated by Autoconf, under
dnl the same distribution terms as the rest of that program.
dnl Subroutines of libtool.m4,
dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
dnl with libtool.m4.
dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
AC_DEFUN([AC_LIB_PROG_LD_GNU],
[AC_REQUIRE([AC_PROG_EGREP])dnl
AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | $EGREP '(GNU|with BFD)' 1>&5; then
acl_cv_prog_gnu_ld=yes
else
acl_cv_prog_gnu_ld=no
fi])
with_gnu_ld=$acl_cv_prog_gnu_ld
])
dnl From libtool-1.4. Sets the variable LD.
AC_DEFUN([AC_LIB_PROG_LD],
[AC_ARG_WITH(gnu-ld,
[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_PROG_EGREP])dnl
# Prepare PATH_SEPARATOR.
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
echo "#! /bin/sh" >conf$$.sh
echo "exit 0" >>conf$$.sh
chmod +x conf$$.sh
if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
PATH_SEPARATOR=';'
else
PATH_SEPARATOR=:
fi
rm -f conf$$.sh
fi
ac_prog=ld
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by GCC])
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
esac
case $ac_prog in
# Accept absolute paths.
[[\\/]* | [A-Za-z]:[\\/]*)]
[re_direlt='/[^/][^/]*/\.\./']
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(acl_cv_path_LD,
[if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
acl_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
if "$acl_cv_path_LD" -v 2>&1 < /dev/null | $EGREP '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
fi
fi
done
IFS="$ac_save_ifs"
else
acl_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$acl_cv_path_LD"
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_LIB_PROG_LD_GNU
])