mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-09 04:21:49 +08:00
61a457e5da
It has bothered me for a long time that we have disabled LSP (and SPE) tests. Also the LSP test comment indicating there is something wrong with get_powerpc_dialect. I don't think there is. Decoding of a VLE instruction depends on whether the processor is in VLE mode (some processors support both VLE and standard PPC) which we flag per section with SHF_PPC_VLE for decoding when disassembling. Background: Some versions of powerpc e200 have "Lightweight Signal Processing" support, examples being e200z215 and e200z425. As far as I can tell, LSP and SPE are mutually exclusive. This seems to be borne out by insn encoding, for example LSP "zvaddih" and SPE "evaddw" have the same encoding. So none of the processor descriptions in ppc_opts ought to have both PPC_OPCODE_LSP and PPC_OPCODE_SPE/2, if we want disassembly to work. I also could not find anything to suggest that the LSP insns are enabled only in VLE mode, which means the LSP insns should not be in vle_opcodes. Fix all this by moving the LSP insns to their own table, and add a new e200z2 cpu entry with LSP support, removing LSP from -me200z4 and from -mvle. (Yes, I know, as I said above some of the e200z4 processors have LSP. Others have SPE. It's hard to choose good options. Think of z2 as meaning earlier, z4 as later.) Also add -mlsp to allow adding the LSP insn set. include/ * opcode/ppc.h (lsp_opcodes, lsp_num_opcodes): Declare. (LSP_OP_TO_SEG): Define. binutils/ * doc/binutils.texi: Update ppc docs. gas/ * config/tc-ppc.c (ppc_setup_opcodes): Add lsp opcodes to ppc_hash. * doc/c-ppc.texi: Document e200 and lsp. * testsuite/gas/ppc/lsp-checks.d: Assemble with -me200z2. * testsuite/gas/ppc/lsp.d: Likewise, disassembly too. * testsuite/gas/ppc/ppc.exp: Don't xfail lsp test. opcodes/ * ppc-dis.c (ppc_opts): Add e200z2 and lsp. Don't set PPC_OPCODE_LSP for e200z4 or vle. (ppc_parse_cpu): Mutually exclude LSP and SPE. (LSP_OPCD_SEGS): Define. (lsp_opcd_indices): New array. (disassemble_init_powerpc): Init lsp_opcd_indices. (lookup_lsp): New function. (print_insn_powerpc): Call it. * ppc-opc.c: Include libiberty.h for ARRAY_SIZE and use throughout. (vle_opcodes): Move LSP opcodes to.. (lsp_opcodes): ..here, and sort. (lsp_num_opcodes): New.
252 lines
6.1 KiB
Plaintext
252 lines
6.1 KiB
Plaintext
@c Copyright (C) 2001-2022 Free Software Foundation, Inc.
|
|
@c This is part of the GAS manual.
|
|
@c For copying conditions, see the file as.texinfo.
|
|
@c man end
|
|
@ifset GENERIC
|
|
@page
|
|
@node PPC-Dependent
|
|
@chapter PowerPC Dependent Features
|
|
@end ifset
|
|
@ifclear GENERIC
|
|
@node Machine Dependencies
|
|
@chapter PowerPC Dependent Features
|
|
@end ifclear
|
|
|
|
@cindex PowerPC support
|
|
@menu
|
|
* PowerPC-Opts:: Options
|
|
* PowerPC-Pseudo:: PowerPC Assembler Directives
|
|
* PowerPC-Syntax:: PowerPC Syntax
|
|
@end menu
|
|
|
|
@node PowerPC-Opts
|
|
@section Options
|
|
|
|
@cindex options for PowerPC
|
|
@cindex PowerPC options
|
|
@cindex architectures, PowerPC
|
|
@cindex PowerPC architectures
|
|
The PowerPC chip family includes several successive levels, using the same
|
|
core instruction set, but including a few additional instructions at
|
|
each level. There are exceptions to this however. For details on what
|
|
instructions each variant supports, please see the chip's architecture
|
|
reference manual.
|
|
|
|
The following table lists all available PowerPC options.
|
|
|
|
@c man begin OPTIONS
|
|
@table @gcctabopt
|
|
@item -a32
|
|
Generate ELF32 or XCOFF32.
|
|
|
|
@item -a64
|
|
Generate ELF64 or XCOFF64.
|
|
|
|
@item -K PIC
|
|
Set EF_PPC_RELOCATABLE_LIB in ELF flags.
|
|
|
|
@item -mpwrx | -mpwr2
|
|
Generate code for POWER/2 (RIOS2).
|
|
|
|
@item -mpwr
|
|
Generate code for POWER (RIOS1)
|
|
|
|
@item -m601
|
|
Generate code for PowerPC 601.
|
|
|
|
@item -mppc, -mppc32, -m603, -m604
|
|
Generate code for PowerPC 603/604.
|
|
|
|
@item -m403, -m405
|
|
Generate code for PowerPC 403/405.
|
|
|
|
@item -m440
|
|
Generate code for PowerPC 440. BookE and some 405 instructions.
|
|
|
|
@item -m464
|
|
Generate code for PowerPC 464.
|
|
|
|
@item -m476
|
|
Generate code for PowerPC 476.
|
|
|
|
@item -m7400, -m7410, -m7450, -m7455
|
|
Generate code for PowerPC 7400/7410/7450/7455.
|
|
|
|
@item -m750cl, -mgekko, -mbroadway
|
|
Generate code for PowerPC 750CL/Gekko/Broadway.
|
|
|
|
@item -m821, -m850, -m860
|
|
Generate code for PowerPC 821/850/860.
|
|
|
|
@item -mppc64, -m620
|
|
Generate code for PowerPC 620/625/630.
|
|
|
|
@item -me200z2, -me200z4
|
|
Generate code for e200 variants, e200z2 with LSP, e200z4 with SPE.
|
|
|
|
@item -me300
|
|
Generate code for PowerPC e300 family.
|
|
|
|
@item -me500, -me500x2
|
|
Generate code for Motorola e500 core complex.
|
|
|
|
@item -me500mc
|
|
Generate code for Freescale e500mc core complex.
|
|
|
|
@item -me500mc64
|
|
Generate code for Freescale e500mc64 core complex.
|
|
|
|
@item -me5500
|
|
Generate code for Freescale e5500 core complex.
|
|
|
|
@item -me6500
|
|
Generate code for Freescale e6500 core complex.
|
|
|
|
@item -mlsp
|
|
Enable LSP instructions. (Disables SPE and SPE2.)
|
|
|
|
@item -mspe
|
|
Generate code for Motorola SPE instructions. (Disables LSP.)
|
|
|
|
@item -mspe2
|
|
Generate code for Freescale SPE2 instructions. (Disables LSP.)
|
|
|
|
@item -mtitan
|
|
Generate code for AppliedMicro Titan core complex.
|
|
|
|
@item -mppc64bridge
|
|
Generate code for PowerPC 64, including bridge insns.
|
|
|
|
@item -mbooke
|
|
Generate code for 32-bit BookE.
|
|
|
|
@item -ma2
|
|
Generate code for A2 architecture.
|
|
|
|
@item -maltivec
|
|
Generate code for processors with AltiVec instructions.
|
|
|
|
@item -mvle
|
|
Generate code for Freescale PowerPC VLE instructions.
|
|
|
|
@item -mvsx
|
|
Generate code for processors with Vector-Scalar (VSX) instructions.
|
|
|
|
@item -mhtm
|
|
Generate code for processors with Hardware Transactional Memory instructions.
|
|
|
|
@item -mpower4, -mpwr4
|
|
Generate code for Power4 architecture.
|
|
|
|
@item -mpower5, -mpwr5, -mpwr5x
|
|
Generate code for Power5 architecture.
|
|
|
|
@item -mpower6, -mpwr6
|
|
Generate code for Power6 architecture.
|
|
|
|
@item -mpower7, -mpwr7
|
|
Generate code for Power7 architecture.
|
|
|
|
@item -mpower8, -mpwr8
|
|
Generate code for Power8 architecture.
|
|
|
|
@item -mpower9, -mpwr9
|
|
Generate code for Power9 architecture.
|
|
|
|
@item -mpower10, -mpwr10
|
|
Generate code for Power10 architecture.
|
|
|
|
@item -mfuture
|
|
Generate code for 'future' architecture.
|
|
|
|
@item -mcell
|
|
@item -mcell
|
|
Generate code for Cell Broadband Engine architecture.
|
|
|
|
@item -mcom
|
|
Generate code Power/PowerPC common instructions.
|
|
|
|
@item -many
|
|
Generate code for any architecture (PWR/PWRX/PPC).
|
|
|
|
@item -mregnames
|
|
Allow symbolic names for registers.
|
|
|
|
@item -mno-regnames
|
|
Do not allow symbolic names for registers.
|
|
|
|
@item -mrelocatable
|
|
Support for GCC's -mrelocatable option.
|
|
|
|
@item -mrelocatable-lib
|
|
Support for GCC's -mrelocatable-lib option.
|
|
|
|
@item -memb
|
|
Set PPC_EMB bit in ELF flags.
|
|
|
|
@item -mlittle, -mlittle-endian, -le
|
|
Generate code for a little endian machine.
|
|
|
|
@item -mbig, -mbig-endian, -be
|
|
Generate code for a big endian machine.
|
|
|
|
@item -msolaris
|
|
Generate code for Solaris.
|
|
|
|
@item -mno-solaris
|
|
Do not generate code for Solaris.
|
|
|
|
@item -nops=@var{count}
|
|
If an alignment directive inserts more than @var{count} nops, put a
|
|
branch at the beginning to skip execution of the nops.
|
|
@end table
|
|
@c man end
|
|
|
|
|
|
@node PowerPC-Pseudo
|
|
@section PowerPC Assembler Directives
|
|
|
|
@cindex directives for PowerPC
|
|
@cindex PowerPC directives
|
|
A number of assembler directives are available for PowerPC. The
|
|
following table is far from complete.
|
|
|
|
@table @code
|
|
@item .machine "string"
|
|
This directive allows you to change the machine for which code is
|
|
generated. @code{"string"} may be any of the -m cpu selection options
|
|
(without the -m) enclosed in double quotes, @code{"push"}, or
|
|
@code{"pop"}. @code{.machine "push"} saves the currently selected
|
|
cpu, which may be restored with @code{.machine "pop"}.
|
|
@end table
|
|
|
|
@node PowerPC-Syntax
|
|
@section PowerPC Syntax
|
|
@menu
|
|
* PowerPC-Chars:: Special Characters
|
|
@end menu
|
|
|
|
@node PowerPC-Chars
|
|
@subsection Special Characters
|
|
|
|
@cindex line comment character, PowerPC
|
|
@cindex PowerPC line comment character
|
|
The presence of a @samp{#} on a line indicates the start of a comment
|
|
that extends to the end of the current line.
|
|
|
|
If a @samp{#} appears as the first character of a line then the whole
|
|
line is treated as a comment, but in this case the line could also be
|
|
a logical line number directive (@pxref{Comments}) or a preprocessor
|
|
control command (@pxref{Preprocessing}).
|
|
|
|
If the assembler has been configured for the ppc-*-solaris* target
|
|
then the @samp{!} character also acts as a line comment character.
|
|
This can be disabled via the @option{-mno-solaris} command-line
|
|
option.
|
|
|
|
@cindex line separator, PowerPC
|
|
@cindex statement separator, PowerPC
|
|
@cindex PowerPC line separator
|
|
The @samp{;} character can be used to separate statements on the same
|
|
line.
|