binutils-gdb/sim/Makefile.in
Mike Frysinger f9a4d54332 sim: overhaul & unify endian settings management
The m4 macro has 2 args: the "wire" settings (which represents the
hardwired port behavior), and the default settings (which are used
if nothing else is specified).  If none are specified, the arch is
expected to support both, and the value will be probed based on the
user runtime options or the input program.

Only two arches today set the default value (bpf & mips).  We can
probably let this go as it only shows up in one scenario: the sim
is invoked, but with no inputs, and no user endian selection.  This
means bpf will not behave like the other arches: an error is shown
and forces the user to make a choice.  If an input program is used
though, we'll still switch the default to that.  This allows us to
remove the WITH_DEFAULT_TARGET_BYTE_ORDER setting.

For the ports that set a "wire" endian, move it to the runtime init
of the respective sim_open calls.  This allows us to change the
WITH_TARGET_BYTE_ORDER to purely a user-selected configure setting
if they want to force a specific endianness.

With all the endian logic moved to runtime selection, we can move
the configure call up to the common dir so we only process it once
across all ports.

The ppc arch was picking the wire endian based on the target used,
but since we weren't doing that for other biendian arches, we can
let this go too.  We'll rely on the input selecting the endian, or
make the user decide.
2021-06-17 23:20:13 -04:00

1677 lines
68 KiB
Makefile
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2017 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
#
# Copyright (C) 1993-2021 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
# Copyright (C) 1997-2021 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# Parts of the common/ sim code that have been unified.
# Most still lives in common/Make-common.in.
# The IGEN simulator generator for GDB, the GNU Debugger.
#
# Copyright 2002-2021 Free Software Foundation, Inc.
#
# Contributed by Andrew Cagney.
#
# This file is part of GDB.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
# Copyright (C) 1997-2021 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# Copyright (C) 1997-2021 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
check_PROGRAMS = $(am__EXEEXT_3)
EXTRA_PROGRAMS = $(am__EXEEXT_2) testsuite/common/bits-gen$(EXEEXT) \
testsuite/common/fpu-tst$(EXEEXT)
# This makes sure igen is available before building the arch-subdirs which
# need to run the igen tool.
@SIM_ENABLE_IGEN_TRUE@am__append_1 = igen/igen$(EXEEXT)
@SIM_ENABLE_IGEN_TRUE@am__append_2 = igen/libigen.a
@SIM_ENABLE_IGEN_TRUE@am__append_3 = $(igen_IGEN_TOOLS)
@SIM_ENABLE_IGEN_TRUE@am__append_4 = $(igen_IGEN_TOOLS)
TESTS = testsuite/common/bits32m0$(EXEEXT) \
testsuite/common/bits32m31$(EXEEXT) \
testsuite/common/bits64m0$(EXEEXT) \
testsuite/common/bits64m63$(EXEEXT) \
testsuite/common/alu-tst$(EXEEXT)
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
$(top_srcdir)/../config/depstand.m4 \
$(top_srcdir)/../config/lead-dot.m4 \
$(top_srcdir)/../config/override.m4 \
$(top_srcdir)/m4/sim_ac_option_alignment.m4 \
$(top_srcdir)/m4/sim_ac_option_assert.m4 \
$(top_srcdir)/m4/sim_ac_option_debug.m4 \
$(top_srcdir)/m4/sim_ac_option_endian.m4 \
$(top_srcdir)/m4/sim_ac_option_environment.m4 \
$(top_srcdir)/m4/sim_ac_option_profile.m4 \
$(top_srcdir)/m4/sim_ac_option_stdio.m4 \
$(top_srcdir)/m4/sim_ac_option_trace.m4 \
$(top_srcdir)/m4/sim_ac_platform.m4 \
$(top_srcdir)/m4/sim_ac_toolchain.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
$(am__configure_deps) $(pkginclude_HEADERS)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
LIBRARIES = $(noinst_LIBRARIES)
ARFLAGS = cru
AM_V_AR = $(am__v_AR_@AM_V@)
am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@)
am__v_AR_0 = @echo " AR " $@;
am__v_AR_1 =
common_libcommon_a_AR = $(AR) $(ARFLAGS)
common_libcommon_a_LIBADD =
am__dirstamp = $(am__leading_dot)dirstamp
am_common_libcommon_a_OBJECTS = \
common/common_libcommon_a-portability.$(OBJEXT) \
common/common_libcommon_a-sim-load.$(OBJEXT) \
common/common_libcommon_a-version.$(OBJEXT)
common_libcommon_a_OBJECTS = $(am_common_libcommon_a_OBJECTS)
igen_libigen_a_AR = $(AR) $(ARFLAGS)
igen_libigen_a_LIBADD =
@SIM_ENABLE_IGEN_TRUE@am_igen_libigen_a_OBJECTS = \
@SIM_ENABLE_IGEN_TRUE@ igen/table.$(OBJEXT) igen/lf.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/misc.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/filter_host.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-decode.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-cache.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/filter.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-insn.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-model.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-itable.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-icache.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-semantics.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-idecode.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-support.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-engine.$(OBJEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/gen.$(OBJEXT)
igen_libigen_a_OBJECTS = $(am_igen_libigen_a_OBJECTS)
@SIM_ENABLE_IGEN_TRUE@am__EXEEXT_1 = igen/igen$(EXEEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/filter$(EXEEXT) igen/gen$(EXEEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-cache$(EXEEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-decode$(EXEEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-insn$(EXEEXT) \
@SIM_ENABLE_IGEN_TRUE@ igen/table$(EXEEXT)
@SIM_ENABLE_IGEN_TRUE@am__EXEEXT_2 = $(am__EXEEXT_1)
am__EXEEXT_3 = testsuite/common/bits32m0$(EXEEXT) \
testsuite/common/bits32m31$(EXEEXT) \
testsuite/common/bits64m0$(EXEEXT) \
testsuite/common/bits64m63$(EXEEXT) \
testsuite/common/alu-tst$(EXEEXT)
am_igen_filter_OBJECTS =
igen_filter_OBJECTS = $(am_igen_filter_OBJECTS)
@SIM_ENABLE_IGEN_TRUE@igen_filter_DEPENDENCIES = igen/filter-main.o \
@SIM_ENABLE_IGEN_TRUE@ igen/libigen.a
am_igen_gen_OBJECTS =
igen_gen_OBJECTS = $(am_igen_gen_OBJECTS)
@SIM_ENABLE_IGEN_TRUE@igen_gen_DEPENDENCIES = igen/gen-main.o \
@SIM_ENABLE_IGEN_TRUE@ igen/libigen.a
@SIM_ENABLE_IGEN_TRUE@am_igen_igen_OBJECTS = igen/igen.$(OBJEXT)
igen_igen_OBJECTS = $(am_igen_igen_OBJECTS)
@SIM_ENABLE_IGEN_TRUE@igen_igen_DEPENDENCIES = igen/libigen.a
am_igen_ld_cache_OBJECTS =
igen_ld_cache_OBJECTS = $(am_igen_ld_cache_OBJECTS)
@SIM_ENABLE_IGEN_TRUE@igen_ld_cache_DEPENDENCIES = \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-cache-main.o igen/libigen.a
am_igen_ld_decode_OBJECTS =
igen_ld_decode_OBJECTS = $(am_igen_ld_decode_OBJECTS)
@SIM_ENABLE_IGEN_TRUE@igen_ld_decode_DEPENDENCIES = \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-decode-main.o igen/libigen.a
am_igen_ld_insn_OBJECTS =
igen_ld_insn_OBJECTS = $(am_igen_ld_insn_OBJECTS)
@SIM_ENABLE_IGEN_TRUE@igen_ld_insn_DEPENDENCIES = igen/ld-insn-main.o \
@SIM_ENABLE_IGEN_TRUE@ igen/libigen.a
am_igen_table_OBJECTS =
igen_table_OBJECTS = $(am_igen_table_OBJECTS)
@SIM_ENABLE_IGEN_TRUE@igen_table_DEPENDENCIES = igen/table-main.o \
@SIM_ENABLE_IGEN_TRUE@ igen/libigen.a
testsuite_common_alu_tst_SOURCES = testsuite/common/alu-tst.c
testsuite_common_alu_tst_OBJECTS = testsuite/common/alu-tst.$(OBJEXT)
testsuite_common_alu_tst_LDADD = $(LDADD)
testsuite_common_bits_gen_SOURCES = testsuite/common/bits-gen.c
testsuite_common_bits_gen_OBJECTS = \
testsuite/common/bits-gen.$(OBJEXT)
testsuite_common_bits_gen_LDADD = $(LDADD)
testsuite_common_bits32m0_SOURCES = testsuite/common/bits32m0.c
testsuite_common_bits32m0_OBJECTS = \
testsuite/common/bits32m0.$(OBJEXT)
testsuite_common_bits32m0_LDADD = $(LDADD)
testsuite_common_bits32m31_SOURCES = testsuite/common/bits32m31.c
testsuite_common_bits32m31_OBJECTS = \
testsuite/common/bits32m31.$(OBJEXT)
testsuite_common_bits32m31_LDADD = $(LDADD)
testsuite_common_bits64m0_SOURCES = testsuite/common/bits64m0.c
testsuite_common_bits64m0_OBJECTS = \
testsuite/common/bits64m0.$(OBJEXT)
testsuite_common_bits64m0_LDADD = $(LDADD)
testsuite_common_bits64m63_SOURCES = testsuite/common/bits64m63.c
testsuite_common_bits64m63_OBJECTS = \
testsuite/common/bits64m63.$(OBJEXT)
testsuite_common_bits64m63_LDADD = $(LDADD)
testsuite_common_fpu_tst_SOURCES = testsuite/common/fpu-tst.c
testsuite_common_fpu_tst_OBJECTS = testsuite/common/fpu-tst.$(OBJEXT)
testsuite_common_fpu_tst_LDADD = $(LDADD)
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/../depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo " CC " $@;
am__v_CC_1 =
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo " CCLD " $@;
am__v_CCLD_1 =
SOURCES = $(common_libcommon_a_SOURCES) $(igen_libigen_a_SOURCES) \
$(igen_filter_SOURCES) $(igen_gen_SOURCES) \
$(igen_igen_SOURCES) $(igen_ld_cache_SOURCES) \
$(igen_ld_decode_SOURCES) $(igen_ld_insn_SOURCES) \
$(igen_table_SOURCES) testsuite/common/alu-tst.c \
testsuite/common/bits-gen.c testsuite/common/bits32m0.c \
testsuite/common/bits32m31.c testsuite/common/bits64m0.c \
testsuite/common/bits64m63.c testsuite/common/fpu-tst.c
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
install-exec-recursive install-html-recursive \
install-info-recursive install-pdf-recursive \
install-ps-recursive install-recursive installcheck-recursive \
installdirs-recursive pdf-recursive ps-recursive \
tags-recursive uninstall-recursive
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
for p in $$list; do echo "$$p $$p"; done | \
sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
$(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
if (++n[$$2] == $(am__install_max)) \
{ print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
END { for (dir in files) print dir, files[dir] }'
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
test -z "$$files" \
|| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
|| { echo " ( cd '$$dir' && rm -f" $$files ")"; \
$(am__cd) "$$dir" && rm -f $$files; }; \
}
am__installdirs = "$(DESTDIR)$(pkgincludedir)"
HEADERS = $(pkginclude_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
$(RECURSIVE_TARGETS) \
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
cscope check recheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
$(LISP)config.h.in
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
DEJATOOL = $(PACKAGE)
RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir
EXPECT = expect
RUNTEST = runtest
am__tty_colors_dummy = \
mgn= red= grn= lgn= blu= brg= std=; \
am__color_tests=no
am__tty_colors = { \
$(am__tty_colors_dummy); \
if test "X$(AM_COLOR_TESTS)" = Xno; then \
am__color_tests=no; \
elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
am__color_tests=yes; \
elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
am__color_tests=yes; \
fi; \
if test $$am__color_tests = yes; then \
red=''; \
grn=''; \
lgn=''; \
blu=''; \
mgn=''; \
brg=''; \
std=''; \
fi; \
}
am__recheck_rx = ^[ ]*:recheck:[ ]*
am__global_test_result_rx = ^[ ]*:global-test-result:[ ]*
am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]*
# A command that, given a newline-separated list of test names on the
# standard input, print the name of the tests that are to be re-run
# upon "make recheck".
am__list_recheck_tests = $(AWK) '{ \
recheck = 1; \
while ((rc = (getline line < ($$0 ".trs"))) != 0) \
{ \
if (rc < 0) \
{ \
if ((getline line2 < ($$0 ".log")) < 0) \
recheck = 0; \
break; \
} \
else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
{ \
recheck = 0; \
break; \
} \
else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
{ \
break; \
} \
}; \
if (recheck) \
print $$0; \
close ($$0 ".trs"); \
close ($$0 ".log"); \
}'
# A command that, given a newline-separated list of test names on the
# standard input, create the global log from their .trs and .log files.
am__create_global_log = $(AWK) ' \
function fatal(msg) \
{ \
print "fatal: making $@: " msg | "cat >&2"; \
exit 1; \
} \
function rst_section(header) \
{ \
print header; \
len = length(header); \
for (i = 1; i <= len; i = i + 1) \
printf "="; \
printf "\n\n"; \
} \
{ \
copy_in_global_log = 1; \
global_test_result = "RUN"; \
while ((rc = (getline line < ($$0 ".trs"))) != 0) \
{ \
if (rc < 0) \
fatal("failed to read from " $$0 ".trs"); \
if (line ~ /$(am__global_test_result_rx)/) \
{ \
sub("$(am__global_test_result_rx)", "", line); \
sub("[ ]*$$", "", line); \
global_test_result = line; \
} \
else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
copy_in_global_log = 0; \
}; \
if (copy_in_global_log) \
{ \
rst_section(global_test_result ": " $$0); \
while ((rc = (getline line < ($$0 ".log"))) != 0) \
{ \
if (rc < 0) \
fatal("failed to read from " $$0 ".log"); \
print line; \
}; \
printf "\n"; \
}; \
close ($$0 ".trs"); \
close ($$0 ".log"); \
}'
# Restructured Text title.
am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
# Solaris 10 'make', and several other traditional 'make' implementations,
# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it
# by disabling -e (using the XSI extension "set +e") if it's set.
am__sh_e_setup = case $$- in *e*) set +e;; esac
# Default flags passed to test drivers.
am__common_driver_flags = \
--color-tests "$$am__color_tests" \
--enable-hard-errors "$$am__enable_hard_errors" \
--expect-failure "$$am__expect_failure"
# To be inserted before the command running the test. Creates the
# directory for the log if needed. Stores in $dir the directory
# containing $f, in $tst the test, in $log the log. Executes the
# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
# passes TESTS_ENVIRONMENT. Set up options for the wrapper that
# will run the test scripts (or their associated LOG_COMPILER, if
# thy have one).
am__check_pre = \
$(am__sh_e_setup); \
$(am__vpath_adj_setup) $(am__vpath_adj) \
$(am__tty_colors); \
srcdir=$(srcdir); export srcdir; \
case "$@" in \
*/*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \
*) am__odir=.;; \
esac; \
test "x$$am__odir" = x"." || test -d "$$am__odir" \
|| $(MKDIR_P) "$$am__odir" || exit $$?; \
if test -f "./$$f"; then dir=./; \
elif test -f "$$f"; then dir=; \
else dir="$(srcdir)/"; fi; \
tst=$$dir$$f; log='$@'; \
if test -n '$(DISABLE_HARD_ERRORS)'; then \
am__enable_hard_errors=no; \
else \
am__enable_hard_errors=yes; \
fi; \
case " $(XFAIL_TESTS) " in \
*[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \
am__expect_failure=yes;; \
*) \
am__expect_failure=no;; \
esac; \
$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
# A shell command to get the names of the tests scripts with any registered
# extension removed (i.e., equivalently, the names of the test logs, with
# the '.log' extension removed). The result is saved in the shell variable
# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly,
# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
# since that might cause problem with VPATH rewrites for suffix-less tests.
# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
am__set_TESTS_bases = \
bases='$(TEST_LOGS)'; \
bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
bases=`echo $$bases`
RECHECK_LOGS = $(TEST_LOGS)
TEST_SUITE_LOG = test-suite.log
TEST_EXTENSIONS = @EXEEXT@ .test
LOG_DRIVER = $(SHELL) $(top_srcdir)/../test-driver
LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
am__set_b = \
case '$@' in \
*/*) \
case '$*' in \
*/*) b='$*';; \
*) b=`echo '$@' | sed 's/\.log$$//'`; \
esac;; \
*) \
b='$*';; \
esac
am__test_logs1 = $(TESTS:=.log)
am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
TEST_LOGS = $(am__test_logs2:.test.log=.log)
TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/../test-driver
TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
$(TEST_LOG_FLAGS)
DIST_SUBDIRS = $(SUBDIRS)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AR_FOR_BUILD = @AR_FOR_BUILD@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CC_FOR_BUILD = @CC_FOR_BUILD@
CFLAGS = @CFLAGS@
CFLAGS_FOR_BUILD = @CFLAGS_FOR_BUILD@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
C_DIALECT = @C_DIALECT@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LDFLAGS_FOR_BUILD = @LDFLAGS_FOR_BUILD@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKGVERSION = @PKGVERSION@
RANLIB = @RANLIB@
RANLIB_FOR_BUILD = @RANLIB_FOR_BUILD@
REPORT_BUGS_TEXI = @REPORT_BUGS_TEXI@
REPORT_BUGS_TO = @REPORT_BUGS_TO@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SIM_PRIMARY_TARGET = @SIM_PRIMARY_TARGET@
STRIP = @STRIP@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
subdirs = @subdirs@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = dejagnu foreign no-dist subdir-objects
ACLOCAL_AMFLAGS = -Im4 -I.. -I../config
srcroot = $(srcdir)/..
SUBDIRS = @subdirs@
AM_MAKEFLAGS = SIM_PRIMARY_TARGET=$(SIM_PRIMARY_TARGET)
# NB: libcommon.a isn't used directly by ports. We need a target for common
# objects to be a part of, and ports use the individual objects directly.
noinst_LIBRARIES = common/libcommon.a $(am__append_2)
CLEANFILES = common/version.c common/version.c-stamp \
testsuite/common/bits-gen testsuite/common/bits32m0.c \
testsuite/common/bits32m31.c testsuite/common/bits64m0.c \
testsuite/common/bits64m63.c
DISTCLEANFILES =
MOSTLYCLEANFILES = core $(am__append_4) site-srcdir.exp testrun.log \
testrun.sum
AM_CPPFLAGS = -I$(srcroot)/include -I$(srcdir)/common
COMPILE_FOR_BUILD = $(CC_FOR_BUILD) $(AM_CPPFLAGS) $(CFLAGS_FOR_BUILD)
LINK_FOR_BUILD = $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@
# Deps to add to the all-recursive target. These are built before descending
# into any subdirs.
# This makes sure common parts are available before building the arch-subdirs
# which will refer to these.
SIM_ALL_RECURSIVE_DEPS = common/libcommon.a $(am__append_1)
pkginclude_HEADERS = \
$(srcroot)/include/sim/callback.h \
$(srcroot)/include/sim/sim.h
common_libcommon_a_CPPFLAGS = \
$(AM_CPPFLAGS) \
-DSIM_COMMON_BUILD \
-I../bfd \
-I..
common_libcommon_a_SOURCES = \
common/portability.c \
common/sim-load.c \
common/version.c
@SIM_ENABLE_IGEN_TRUE@igen_libigen_a_SOURCES = \
@SIM_ENABLE_IGEN_TRUE@ igen/table.c \
@SIM_ENABLE_IGEN_TRUE@ igen/lf.c \
@SIM_ENABLE_IGEN_TRUE@ igen/misc.c \
@SIM_ENABLE_IGEN_TRUE@ igen/filter_host.c \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-decode.c \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-cache.c \
@SIM_ENABLE_IGEN_TRUE@ igen/filter.c \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-insn.c \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-model.c \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-itable.c \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-icache.c \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-semantics.c \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-idecode.c \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-support.c \
@SIM_ENABLE_IGEN_TRUE@ igen/gen-engine.c \
@SIM_ENABLE_IGEN_TRUE@ igen/gen.c
@SIM_ENABLE_IGEN_TRUE@igen_igen_SOURCES = igen/igen.c
@SIM_ENABLE_IGEN_TRUE@igen_igen_LDADD = igen/libigen.a
@SIM_ENABLE_IGEN_TRUE@igen_filter_SOURCES =
@SIM_ENABLE_IGEN_TRUE@igen_filter_LDADD = igen/filter-main.o igen/libigen.a
@SIM_ENABLE_IGEN_TRUE@igen_gen_SOURCES =
@SIM_ENABLE_IGEN_TRUE@igen_gen_LDADD = igen/gen-main.o igen/libigen.a
@SIM_ENABLE_IGEN_TRUE@igen_ld_cache_SOURCES =
@SIM_ENABLE_IGEN_TRUE@igen_ld_cache_LDADD = igen/ld-cache-main.o igen/libigen.a
@SIM_ENABLE_IGEN_TRUE@igen_ld_decode_SOURCES =
@SIM_ENABLE_IGEN_TRUE@igen_ld_decode_LDADD = igen/ld-decode-main.o igen/libigen.a
@SIM_ENABLE_IGEN_TRUE@igen_ld_insn_SOURCES =
@SIM_ENABLE_IGEN_TRUE@igen_ld_insn_LDADD = igen/ld-insn-main.o igen/libigen.a
@SIM_ENABLE_IGEN_TRUE@igen_table_SOURCES =
@SIM_ENABLE_IGEN_TRUE@igen_table_LDADD = igen/table-main.o igen/libigen.a
@SIM_ENABLE_IGEN_TRUE@igen_IGEN_TOOLS = \
@SIM_ENABLE_IGEN_TRUE@ igen/igen \
@SIM_ENABLE_IGEN_TRUE@ igen/filter \
@SIM_ENABLE_IGEN_TRUE@ igen/gen \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-cache \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-decode \
@SIM_ENABLE_IGEN_TRUE@ igen/ld-insn \
@SIM_ENABLE_IGEN_TRUE@ igen/table
# Tweak the site.exp so it works with plain `runtest` from user.
EXTRA_DEJAGNU_SITE_CONFIG = site-srcdir.exp
testsuite_common_CPPFLAGS = \
-I$(srcdir)/common \
-I$(srcroot)/include \
-I../bfd
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
.SUFFIXES: .c .log .o .obj .test .test$(EXEEXT) .trs
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/common/local.mk $(srcdir)/igen/local.mk $(srcdir)/testsuite/local.mk $(srcdir)/testsuite/common/local.mk $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(srcdir)/common/local.mk $(srcdir)/igen/local.mk $(srcdir)/testsuite/local.mk $(srcdir)/testsuite/common/local.mk $(am__empty):
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
config.h: stamp-h1
@test -f $@ || rm -f stamp-h1
@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status config.h
$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
clean-noinstLIBRARIES:
-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
common/$(am__dirstamp):
@$(MKDIR_P) common
@: > common/$(am__dirstamp)
common/$(DEPDIR)/$(am__dirstamp):
@$(MKDIR_P) common/$(DEPDIR)
@: > common/$(DEPDIR)/$(am__dirstamp)
common/common_libcommon_a-portability.$(OBJEXT): \
common/$(am__dirstamp) common/$(DEPDIR)/$(am__dirstamp)
common/common_libcommon_a-sim-load.$(OBJEXT): common/$(am__dirstamp) \
common/$(DEPDIR)/$(am__dirstamp)
common/common_libcommon_a-version.$(OBJEXT): common/$(am__dirstamp) \
common/$(DEPDIR)/$(am__dirstamp)
common/libcommon.a: $(common_libcommon_a_OBJECTS) $(common_libcommon_a_DEPENDENCIES) $(EXTRA_common_libcommon_a_DEPENDENCIES) common/$(am__dirstamp)
$(AM_V_at)-rm -f common/libcommon.a
$(AM_V_AR)$(common_libcommon_a_AR) common/libcommon.a $(common_libcommon_a_OBJECTS) $(common_libcommon_a_LIBADD)
$(AM_V_at)$(RANLIB) common/libcommon.a
igen/$(am__dirstamp):
@$(MKDIR_P) igen
@: > igen/$(am__dirstamp)
igen/$(DEPDIR)/$(am__dirstamp):
@$(MKDIR_P) igen/$(DEPDIR)
@: > igen/$(DEPDIR)/$(am__dirstamp)
igen/table.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/lf.$(OBJEXT): igen/$(am__dirstamp) igen/$(DEPDIR)/$(am__dirstamp)
igen/misc.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/filter_host.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/ld-decode.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/ld-cache.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/filter.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/ld-insn.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/gen-model.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/gen-itable.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/gen-icache.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/gen-semantics.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/gen-idecode.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/gen-support.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/gen-engine.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
igen/gen.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
@SIM_ENABLE_IGEN_FALSE@igen/libigen.a: $(igen_libigen_a_OBJECTS) $(igen_libigen_a_DEPENDENCIES) $(EXTRA_igen_libigen_a_DEPENDENCIES) igen/$(am__dirstamp)
@SIM_ENABLE_IGEN_FALSE@ $(AM_V_at)-rm -f igen/libigen.a
@SIM_ENABLE_IGEN_FALSE@ $(AM_V_AR)$(igen_libigen_a_AR) igen/libigen.a $(igen_libigen_a_OBJECTS) $(igen_libigen_a_LIBADD)
@SIM_ENABLE_IGEN_FALSE@ $(AM_V_at)$(RANLIB) igen/libigen.a
clean-checkPROGRAMS:
-test -z "$(check_PROGRAMS)" || rm -f $(check_PROGRAMS)
igen/filter$(EXEEXT): $(igen_filter_OBJECTS) $(igen_filter_DEPENDENCIES) $(EXTRA_igen_filter_DEPENDENCIES) igen/$(am__dirstamp)
@rm -f igen/filter$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(igen_filter_OBJECTS) $(igen_filter_LDADD) $(LIBS)
igen/gen$(EXEEXT): $(igen_gen_OBJECTS) $(igen_gen_DEPENDENCIES) $(EXTRA_igen_gen_DEPENDENCIES) igen/$(am__dirstamp)
@rm -f igen/gen$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(igen_gen_OBJECTS) $(igen_gen_LDADD) $(LIBS)
igen/igen.$(OBJEXT): igen/$(am__dirstamp) \
igen/$(DEPDIR)/$(am__dirstamp)
@SIM_ENABLE_IGEN_FALSE@igen/igen$(EXEEXT): $(igen_igen_OBJECTS) $(igen_igen_DEPENDENCIES) $(EXTRA_igen_igen_DEPENDENCIES) igen/$(am__dirstamp)
@SIM_ENABLE_IGEN_FALSE@ @rm -f igen/igen$(EXEEXT)
@SIM_ENABLE_IGEN_FALSE@ $(AM_V_CCLD)$(LINK) $(igen_igen_OBJECTS) $(igen_igen_LDADD) $(LIBS)
igen/ld-cache$(EXEEXT): $(igen_ld_cache_OBJECTS) $(igen_ld_cache_DEPENDENCIES) $(EXTRA_igen_ld_cache_DEPENDENCIES) igen/$(am__dirstamp)
@rm -f igen/ld-cache$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(igen_ld_cache_OBJECTS) $(igen_ld_cache_LDADD) $(LIBS)
igen/ld-decode$(EXEEXT): $(igen_ld_decode_OBJECTS) $(igen_ld_decode_DEPENDENCIES) $(EXTRA_igen_ld_decode_DEPENDENCIES) igen/$(am__dirstamp)
@rm -f igen/ld-decode$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(igen_ld_decode_OBJECTS) $(igen_ld_decode_LDADD) $(LIBS)
igen/ld-insn$(EXEEXT): $(igen_ld_insn_OBJECTS) $(igen_ld_insn_DEPENDENCIES) $(EXTRA_igen_ld_insn_DEPENDENCIES) igen/$(am__dirstamp)
@rm -f igen/ld-insn$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(igen_ld_insn_OBJECTS) $(igen_ld_insn_LDADD) $(LIBS)
igen/table$(EXEEXT): $(igen_table_OBJECTS) $(igen_table_DEPENDENCIES) $(EXTRA_igen_table_DEPENDENCIES) igen/$(am__dirstamp)
@rm -f igen/table$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(igen_table_OBJECTS) $(igen_table_LDADD) $(LIBS)
testsuite/common/$(am__dirstamp):
@$(MKDIR_P) testsuite/common
@: > testsuite/common/$(am__dirstamp)
testsuite/common/$(DEPDIR)/$(am__dirstamp):
@$(MKDIR_P) testsuite/common/$(DEPDIR)
@: > testsuite/common/$(DEPDIR)/$(am__dirstamp)
testsuite/common/alu-tst.$(OBJEXT): testsuite/common/$(am__dirstamp) \
testsuite/common/$(DEPDIR)/$(am__dirstamp)
testsuite/common/bits-gen.$(OBJEXT): testsuite/common/$(am__dirstamp) \
testsuite/common/$(DEPDIR)/$(am__dirstamp)
testsuite/common/bits32m0.$(OBJEXT): testsuite/common/$(am__dirstamp) \
testsuite/common/$(DEPDIR)/$(am__dirstamp)
testsuite/common/bits32m31.$(OBJEXT): \
testsuite/common/$(am__dirstamp) \
testsuite/common/$(DEPDIR)/$(am__dirstamp)
testsuite/common/bits64m0.$(OBJEXT): testsuite/common/$(am__dirstamp) \
testsuite/common/$(DEPDIR)/$(am__dirstamp)
testsuite/common/bits64m63.$(OBJEXT): \
testsuite/common/$(am__dirstamp) \
testsuite/common/$(DEPDIR)/$(am__dirstamp)
testsuite/common/fpu-tst.$(OBJEXT): testsuite/common/$(am__dirstamp) \
testsuite/common/$(DEPDIR)/$(am__dirstamp)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
-rm -f common/*.$(OBJEXT)
-rm -f igen/*.$(OBJEXT)
-rm -f testsuite/common/*.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@common/$(DEPDIR)/common_libcommon_a-portability.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@common/$(DEPDIR)/common_libcommon_a-sim-load.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@common/$(DEPDIR)/common_libcommon_a-version.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/filter.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/filter_host.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen-engine.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen-icache.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen-idecode.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen-itable.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen-model.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen-semantics.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen-support.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/gen.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/igen.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/ld-cache.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/ld-decode.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/ld-insn.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/lf.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/misc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@igen/$(DEPDIR)/table.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@testsuite/common/$(DEPDIR)/alu-tst.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@testsuite/common/$(DEPDIR)/bits-gen.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@testsuite/common/$(DEPDIR)/bits32m0.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@testsuite/common/$(DEPDIR)/bits32m31.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@testsuite/common/$(DEPDIR)/bits64m0.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@testsuite/common/$(DEPDIR)/bits64m63.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@testsuite/common/$(DEPDIR)/fpu-tst.Po@am__quote@
.c.o:
@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
.c.obj:
@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
common/common_libcommon_a-portability.o: common/portability.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-portability.o -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-portability.Tpo -c -o common/common_libcommon_a-portability.o `test -f 'common/portability.c' || echo '$(srcdir)/'`common/portability.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-portability.Tpo common/$(DEPDIR)/common_libcommon_a-portability.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/portability.c' object='common/common_libcommon_a-portability.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-portability.o `test -f 'common/portability.c' || echo '$(srcdir)/'`common/portability.c
common/common_libcommon_a-portability.obj: common/portability.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-portability.obj -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-portability.Tpo -c -o common/common_libcommon_a-portability.obj `if test -f 'common/portability.c'; then $(CYGPATH_W) 'common/portability.c'; else $(CYGPATH_W) '$(srcdir)/common/portability.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-portability.Tpo common/$(DEPDIR)/common_libcommon_a-portability.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/portability.c' object='common/common_libcommon_a-portability.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-portability.obj `if test -f 'common/portability.c'; then $(CYGPATH_W) 'common/portability.c'; else $(CYGPATH_W) '$(srcdir)/common/portability.c'; fi`
common/common_libcommon_a-sim-load.o: common/sim-load.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-sim-load.o -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-sim-load.Tpo -c -o common/common_libcommon_a-sim-load.o `test -f 'common/sim-load.c' || echo '$(srcdir)/'`common/sim-load.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-sim-load.Tpo common/$(DEPDIR)/common_libcommon_a-sim-load.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/sim-load.c' object='common/common_libcommon_a-sim-load.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-sim-load.o `test -f 'common/sim-load.c' || echo '$(srcdir)/'`common/sim-load.c
common/common_libcommon_a-sim-load.obj: common/sim-load.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-sim-load.obj -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-sim-load.Tpo -c -o common/common_libcommon_a-sim-load.obj `if test -f 'common/sim-load.c'; then $(CYGPATH_W) 'common/sim-load.c'; else $(CYGPATH_W) '$(srcdir)/common/sim-load.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-sim-load.Tpo common/$(DEPDIR)/common_libcommon_a-sim-load.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/sim-load.c' object='common/common_libcommon_a-sim-load.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-sim-load.obj `if test -f 'common/sim-load.c'; then $(CYGPATH_W) 'common/sim-load.c'; else $(CYGPATH_W) '$(srcdir)/common/sim-load.c'; fi`
common/common_libcommon_a-version.o: common/version.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-version.o -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-version.Tpo -c -o common/common_libcommon_a-version.o `test -f 'common/version.c' || echo '$(srcdir)/'`common/version.c
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-version.Tpo common/$(DEPDIR)/common_libcommon_a-version.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/version.c' object='common/common_libcommon_a-version.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-version.o `test -f 'common/version.c' || echo '$(srcdir)/'`common/version.c
common/common_libcommon_a-version.obj: common/version.c
@am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT common/common_libcommon_a-version.obj -MD -MP -MF common/$(DEPDIR)/common_libcommon_a-version.Tpo -c -o common/common_libcommon_a-version.obj `if test -f 'common/version.c'; then $(CYGPATH_W) 'common/version.c'; else $(CYGPATH_W) '$(srcdir)/common/version.c'; fi`
@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) common/$(DEPDIR)/common_libcommon_a-version.Tpo common/$(DEPDIR)/common_libcommon_a-version.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='common/version.c' object='common/common_libcommon_a-version.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(common_libcommon_a_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o common/common_libcommon_a-version.obj `if test -f 'common/version.c'; then $(CYGPATH_W) 'common/version.c'; else $(CYGPATH_W) '$(srcdir)/common/version.c'; fi`
install-pkgincludeHEADERS: $(pkginclude_HEADERS)
@$(NORMAL_INSTALL)
@list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(pkgincludedir)'"; \
$(MKDIR_P) "$(DESTDIR)$(pkgincludedir)" || exit 1; \
fi; \
for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
echo "$$d$$p"; \
done | $(am__base_list) | \
while read files; do \
echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \
$(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \
done
uninstall-pkgincludeHEADERS:
@$(NORMAL_UNINSTALL)
@list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
dir='$(DESTDIR)$(pkgincludedir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
# (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
@fail=; \
if $(am__make_keepgoing); then \
failcom='fail=yes'; \
else \
failcom='exit 1'; \
fi; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-recursive
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
test ! -s cscope.files \
|| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
site.exp: Makefile $(EXTRA_DEJAGNU_SITE_CONFIG)
@echo 'Making a new site.exp file ...'
@echo '## these variables are automatically generated by make ##' >site.tmp
@echo '# Do not edit here. If you wish to override these values' >>site.tmp
@echo '# edit the last section' >>site.tmp
@echo 'set srcdir "$(srcdir)"' >>site.tmp
@echo "set objdir `pwd`" >>site.tmp
@echo 'set build_alias "$(build_alias)"' >>site.tmp
@echo 'set build_triplet $(build_triplet)' >>site.tmp
@echo 'set host_alias "$(host_alias)"' >>site.tmp
@echo 'set host_triplet $(host_triplet)' >>site.tmp
@echo 'set target_alias "$(target_alias)"' >>site.tmp
@echo 'set target_triplet $(target_triplet)' >>site.tmp
@list='$(EXTRA_DEJAGNU_SITE_CONFIG)'; for f in $$list; do \
echo "## Begin content included from file $$f. Do not modify. ##" \
&& cat `test -f "$$f" || echo '$(srcdir)/'`$$f \
&& echo "## End content included from file $$f. ##" \
|| exit 1; \
done >> site.tmp
@echo "## End of auto-generated content; you can edit from here. ##" >> site.tmp
@if test -f site.exp; then \
sed -e '1,/^## End of auto-generated content.*##/d' site.exp >> site.tmp; \
fi
@-rm -f site.bak
@test ! -f site.exp || mv site.exp site.bak
@mv site.tmp site.exp
distclean-DEJAGNU:
-rm -f site.exp site.bak
-l='$(DEJATOOL)'; for tool in $$l; do \
rm -f $$tool.sum $$tool.log; \
done
# Recover from deleted '.trs' file; this should ensure that
# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells
# to avoid problems with "make -n".
.log.trs:
rm -f $< $@
$(MAKE) $(AM_MAKEFLAGS) $<
# Leading 'am--fnord' is there to ensure the list of targets does not
# expand to empty, as could happen e.g. with make check TESTS=''.
am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
am--force-recheck:
@:
$(TEST_SUITE_LOG): $(TEST_LOGS)
@$(am__set_TESTS_bases); \
am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
redo_bases=`for i in $$bases; do \
am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
done`; \
if test -n "$$redo_bases"; then \
redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
if $(am__make_dryrun); then :; else \
rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
fi; \
fi; \
if test -n "$$am__remaking_logs"; then \
echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
"recursion detected" >&2; \
elif test -n "$$redo_logs"; then \
am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
fi; \
if $(am__make_dryrun); then :; else \
st=0; \
errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
for i in $$redo_bases; do \
test -f $$i.trs && test -r $$i.trs \
|| { echo "$$errmsg $$i.trs" >&2; st=1; }; \
test -f $$i.log && test -r $$i.log \
|| { echo "$$errmsg $$i.log" >&2; st=1; }; \
done; \
test $$st -eq 0 || exit 1; \
fi
@$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
ws='[ ]'; \
results=`for b in $$bases; do echo $$b.trs; done`; \
test -n "$$results" || results=/dev/null; \
all=` grep "^$$ws*:test-result:" $$results | wc -l`; \
pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \
fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \
skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \
xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
if test `expr $$fail + $$xpass + $$error` -eq 0; then \
success=true; \
else \
success=false; \
fi; \
br='==================='; br=$$br$$br$$br$$br; \
result_count () \
{ \
if test x"$$1" = x"--maybe-color"; then \
maybe_colorize=yes; \
elif test x"$$1" = x"--no-color"; then \
maybe_colorize=no; \
else \
echo "$@: invalid 'result_count' usage" >&2; exit 4; \
fi; \
shift; \
desc=$$1 count=$$2; \
if test $$maybe_colorize = yes && test $$count -gt 0; then \
color_start=$$3 color_end=$$std; \
else \
color_start= color_end=; \
fi; \
echo "$${color_start}# $$desc $$count$${color_end}"; \
}; \
create_testsuite_report () \
{ \
result_count $$1 "TOTAL:" $$all "$$brg"; \
result_count $$1 "PASS: " $$pass "$$grn"; \
result_count $$1 "SKIP: " $$skip "$$blu"; \
result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
result_count $$1 "FAIL: " $$fail "$$red"; \
result_count $$1 "XPASS:" $$xpass "$$red"; \
result_count $$1 "ERROR:" $$error "$$mgn"; \
}; \
{ \
echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \
$(am__rst_title); \
create_testsuite_report --no-color; \
echo; \
echo ".. contents:: :depth: 2"; \
echo; \
for b in $$bases; do echo $$b; done \
| $(am__create_global_log); \
} >$(TEST_SUITE_LOG).tmp || exit 1; \
mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \
if $$success; then \
col="$$grn"; \
else \
col="$$red"; \
test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \
fi; \
echo "$${col}$$br$${std}"; \
echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \
echo "$${col}$$br$${std}"; \
create_testsuite_report --maybe-color; \
echo "$$col$$br$$std"; \
if $$success; then :; else \
echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \
if test -n "$(PACKAGE_BUGREPORT)"; then \
echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \
fi; \
echo "$$col$$br$$std"; \
fi; \
$$success || exit 1
check-TESTS:
@list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list
@list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
@set +e; $(am__set_TESTS_bases); \
log_list=`for i in $$bases; do echo $$i.log; done`; \
trs_list=`for i in $$bases; do echo $$i.trs; done`; \
log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
exit $$?;
recheck: all $(check_PROGRAMS)
@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
@set +e; $(am__set_TESTS_bases); \
bases=`for i in $$bases; do echo $$i; done \
| $(am__list_recheck_tests)` || exit 1; \
log_list=`for i in $$bases; do echo $$i.log; done`; \
log_list=`echo $$log_list`; \
$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
am__force_recheck=am--force-recheck \
TEST_LOGS="$$log_list"; \
exit $$?
testsuite/common/bits32m0.log: testsuite/common/bits32m0$(EXEEXT)
@p='testsuite/common/bits32m0$(EXEEXT)'; \
b='testsuite/common/bits32m0'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
testsuite/common/bits32m31.log: testsuite/common/bits32m31$(EXEEXT)
@p='testsuite/common/bits32m31$(EXEEXT)'; \
b='testsuite/common/bits32m31'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
testsuite/common/bits64m0.log: testsuite/common/bits64m0$(EXEEXT)
@p='testsuite/common/bits64m0$(EXEEXT)'; \
b='testsuite/common/bits64m0'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
testsuite/common/bits64m63.log: testsuite/common/bits64m63$(EXEEXT)
@p='testsuite/common/bits64m63$(EXEEXT)'; \
b='testsuite/common/bits64m63'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
testsuite/common/alu-tst.log: testsuite/common/alu-tst$(EXEEXT)
@p='testsuite/common/alu-tst$(EXEEXT)'; \
b='testsuite/common/alu-tst'; \
$(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
.test.log:
@p='$<'; \
$(am__set_b); \
$(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
--log-file $$b.log --trs-file $$b.trs \
$(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
"$$tst" $(AM_TESTS_FD_REDIRECT)
@am__EXEEXT_TRUE@.test$(EXEEXT).log:
@am__EXEEXT_TRUE@ @p='$<'; \
@am__EXEEXT_TRUE@ $(am__set_b); \
@am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \
@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT)
check-am: all-am
$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
$(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU check-TESTS
check: check-recursive
all-am: Makefile $(LIBRARIES) $(HEADERS) config.h
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(pkgincludedir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-rm -f common/$(DEPDIR)/$(am__dirstamp)
-rm -f common/$(am__dirstamp)
-rm -f igen/$(DEPDIR)/$(am__dirstamp)
-rm -f igen/$(am__dirstamp)
-rm -f testsuite/common/$(DEPDIR)/$(am__dirstamp)
-rm -f testsuite/common/$(am__dirstamp)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-checkPROGRAMS clean-generic clean-noinstLIBRARIES \
mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf common/$(DEPDIR) igen/$(DEPDIR) testsuite/common/$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-DEJAGNU distclean-compile \
distclean-generic distclean-hdr distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am: install-pkgincludeHEADERS
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -rf common/$(DEPDIR) igen/$(DEPDIR) testsuite/common/$(DEPDIR)
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-compile mostlyclean-generic
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-pkgincludeHEADERS
.MAKE: $(am__recursive_targets) all check-am install-am install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
am--refresh check check-DEJAGNU check-TESTS check-am clean \
clean-checkPROGRAMS clean-cscope clean-generic \
clean-noinstLIBRARIES cscope cscopelist-am ctags ctags-am \
distclean distclean-DEJAGNU distclean-compile \
distclean-generic distclean-hdr distclean-tags dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-pkgincludeHEADERS install-ps install-ps-am \
install-strip installcheck installcheck-am installdirs \
installdirs-am maintainer-clean maintainer-clean-generic \
mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
ps ps-am recheck tags tags-am uninstall uninstall-am \
uninstall-pkgincludeHEADERS
.PRECIOUS: Makefile
# Generate nltvals.def for newlib/libgloss using devo and build tree.
# This file is shipped with distributions so we build in the source dir.
# Use `make nltvals' to rebuild.
# Note: If gdb releases begin to contain target header files (not a good idea,
# but if they did ...), nltvals.def coud be generated at build time.
# An alternative is to slurp in the tables at runtime.
.PHONY: nltvals
nltvals:
$(abs_srcdir)/common/gennltvals.py --cpp "$(CPP)" --output nltvals.def --srcroot $(srcroot)
$(SHELL) $(srcroot)/move-if-change nltvals.def $(abs_srcdir)/common/nltvals.def
common/version.c: common/version.c-stamp ; @true
common/version.c-stamp: $(srcroot)/gdb/version.in $(srcroot)/bfd/version.h $(srcdir)/common/create-version.sh
$(AM_V_GEN)$(SHELL) $(srcdir)/common/create-version.sh $(srcroot)/gdb $@.tmp
$(AM_V_at)$(SHELL) $(srcroot)/move-if-change $@.tmp $(@:-stamp=)
$(AM_V_at)touch $@
# Alias for developers.
@SIM_ENABLE_IGEN_TRUE@igen: igen/igen$(EXEEXT)
# These rules are copied from automake, but tweaked to use FOR_BUILD variables.
@SIM_ENABLE_IGEN_TRUE@igen/libigen.a: $(igen_libigen_a_OBJECTS) $(igen_libigen_a_DEPENDENCIES) $(EXTRA_igen_libigen_a_DEPENDENCIES) igen/$(am__dirstamp)
@SIM_ENABLE_IGEN_TRUE@ $(AM_V_at)-rm -f $@
@SIM_ENABLE_IGEN_TRUE@ $(AM_V_AR)$(AR_FOR_BUILD) $(ARFLAGS) $@ $(igen_libigen_a_OBJECTS) $(igen_libigen_a_LIBADD)
@SIM_ENABLE_IGEN_TRUE@ $(AM_V_at)$(RANLIB_FOR_BUILD) $@
@SIM_ENABLE_IGEN_TRUE@igen/igen$(EXEEXT): $(igen_igen_OBJECTS) $(igen_igen_DEPENDENCIES) igen/$(am__dirstamp)
@SIM_ENABLE_IGEN_TRUE@ $(AM_V_CCLD)$(LINK_FOR_BUILD) $(igen_igen_OBJECTS) $(igen_igen_LDADD)
# igen is a build-time only tool. Override the default rules for it.
@SIM_ENABLE_IGEN_TRUE@igen/%.o: igen/%.c
@SIM_ENABLE_IGEN_TRUE@ $(AM_V_CC)$(COMPILE_FOR_BUILD) -c $< -o $@
# Build some of the files in standalone mode for developers of igen itself.
@SIM_ENABLE_IGEN_TRUE@igen/%-main.o: igen/%.c
@SIM_ENABLE_IGEN_TRUE@ $(AM_V_CC)$(COMPILE_FOR_BUILD) -DMAIN -c $< -o $@
site-srcdir.exp: Makefile
echo "set srcdir \"$(srcdir)/testsuite\"" > $@
check-DEJAGNU: site.exp
LC_ALL=C; export LC_ALL; \
EXPECT=${EXPECT} ; export EXPECT ; \
runtest=$(RUNTEST); \
if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
$$runtest $(RUNTESTFLAGS); \
else echo "WARNING: could not find \`runtest'" 1>&2; :;\
fi
# These tests are build-time only tools. Override the default rules for them.
testsuite/common/%.o: testsuite/common/%.c
$(AM_V_CC)$(COMPILE_FOR_BUILD) $(testsuite_common_CPPFLAGS) -c $< -o $@
testsuite/common/alu-tst$(EXEEXT): $(testsuite_common_alu_tst_OBJECTS) $(testsuite_common_alu_tst_DEPENDENCIES) testsuite/common/$(am__dirstamp)
$(AM_V_CCLD)$(LINK_FOR_BUILD) $(testsuite_common_alu_tst_OBJECTS) $(testsuite_common_alu_tst_LDADD)
testsuite/common/fpu-tst$(EXEEXT): $(testsuite_common_fpu_tst_OBJECTS) $(testsuite_common_fpu_tst_DEPENDENCIES) testsuite/common/$(am__dirstamp)
$(AM_V_CCLD)$(LINK_FOR_BUILD) $(testsuite_common_fpu_tst_OBJECTS) $(testsuite_common_fpu_tst_LDADD)
testsuite/common/bits-gen$(EXEEXT): $(testsuite_common_bits_gen_OBJECTS) $(testsuite_common_bits_gen_DEPENDENCIES) testsuite/common/$(am__dirstamp)
$(AM_V_CCLD)$(LINK_FOR_BUILD) $(testsuite_common_bits_gen_OBJECTS) $(testsuite_common_bits_gen_LDADD)
testsuite/common/bits32m0$(EXEEXT): $(testsuite_common_bits32m0_OBJECTS) $(testsuite_common_bits32m0_DEPENDENCIES) testsuite/common/$(am__dirstamp)
$(AM_V_CCLD)$(LINK_FOR_BUILD) $(testsuite_common_bits32m0_OBJECTS) $(testsuite_common_bits32m0_LDADD)
testsuite/common/bits32m0.c: testsuite/common/bits-gen testsuite/common/bits-tst.c
$(AM_V_GEN)$< 32 0 big > $@.tmp
$(AM_V_at)cat $(srcdir)/testsuite/common/bits-tst.c >> $@.tmp
$(AM_V_at)mv $@.tmp $@
testsuite/common/bits32m31$(EXEEXT): $(testsuite_common_bits32m31_OBJECTS) $(testsuite_common_bits32m31_DEPENDENCIES) testsuite/common/$(am__dirstamp)
$(AM_V_CCLD)$(LINK_FOR_BUILD) $(testsuite_common_bits32m31_OBJECTS) $(testsuite_common_bits32m31_LDADD)
testsuite/common/bits32m31.c: testsuite/common/bits-gen testsuite/common/bits-tst.c
$(AM_V_GEN)$< 32 31 little > $@.tmp
$(AM_V_at)cat $(srcdir)/testsuite/common/bits-tst.c >> $@.tmp
$(AM_V_at)mv $@.tmp $@
testsuite/common/bits64m0$(EXEEXT): $(testsuite_common_bits64m0_OBJECTS) $(testsuite_common_bits64m0_DEPENDENCIES) testsuite/common/$(am__dirstamp)
$(AM_V_CCLD)$(LINK_FOR_BUILD) $(testsuite_common_bits64m0_OBJECTS) $(testsuite_common_bits64m0_LDADD)
testsuite/common/bits64m0.c: testsuite/common/bits-gen testsuite/common/bits-tst.c
$(AM_V_GEN)$< 64 0 big > $@.tmp
$(AM_V_at)cat $(srcdir)/testsuite/common/bits-tst.c >> $@.tmp
$(AM_V_at)mv $@.tmp $@
testsuite/common/bits64m63$(EXEEXT): $(testsuite_common_bits64m63_OBJECTS) $(testsuite_common_bits64m63_DEPENDENCIES) testsuite/common/$(am__dirstamp)
$(AM_V_CCLD)$(LINK_FOR_BUILD) $(testsuite_common_bits64m63_OBJECTS) $(testsuite_common_bits64m63_LDADD)
testsuite/common/bits64m63.c: testsuite/common/bits-gen testsuite/common/bits-tst.c
$(AM_V_GEN)$< 64 63 little > $@.tmp
$(AM_V_at)cat $(srcdir)/testsuite/common/bits-tst.c >> $@.tmp
$(AM_V_at)mv $@.tmp $@
all-recursive: $(SIM_ALL_RECURSIVE_DEPS)
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: