mirror/binutils-gdb
2
0
Fork 0
mirror of https://sourceware.org/git/binutils-gdb.git synced 2024-12-21 04:42:53 +08:00
Code Issues Packages Projects Releases Wiki Activity
f786c359c1
binutils-gdb/opcodes/Makefile.am
Maciej W. Rozycki 2b677209fe opcodes: Fix RPATH not being set for dynamic libbfd dependency 
If built as a shared library, libopcodes has a load-time dependency on
libbfd, which is recorded in the dynamic section, however without a
corresponding RPATH entry for the directory to find libbfd in.  This
causes loading to fail whenever libbfd is only pulled by libopcodes
indirectly and libbfd has been installed in a directory that is not in
the dynamic loader's search path.

It does not happen with the programs included with binutils or GDB,
because they all also pull libbfd when using libopcodes, but it can
happen with external software, e.g.:

$ gdbserver --help
gdbserver: error while loading shared libraries: libbfd-[...].so: cannot open shared object file: No such file or directory
$

(not our `gdbserver').

Indirect dynamic dependencies are handled by libtool automatically by
adding RPATH entries as required, however our setup for libopcodes
prevents this from happening by linking in libbfd with an explicit file
reference sneaked through to the linker directly behind libtool's back
via the `-Wl' linker command-line option rather than via `-l' combined
with a suitable library search path specified via `-L', as it would be
usually the case, or just referring to the relevant .la file in a fully
libtool-enabled configuration such as ours.

According to an observation in the discussion back in 2007[1][2][3] that
has led to the current arrangement it is to prevent libtool from picking
up the wrong version of libbfd.  It does not appear to be needed though,
not at least with our current libtool incarnation, as directly referring
`libbfd.la' does exactly what it should, as previously suggested[4], and
with no link-time reference to the installation directory other than to
set RPATH.  Uninstalled version of libopcodes has libbfd's build-time
location prepended to RPATH too, as also expected.

Use a direct reference to `libbfd.la' then, making the load error quoted
above go away.  Alternatively `-L' and `-l' could be used to the same
effect, but it seems an unnecessary complication and just another way to
circumvent rather than making use of libtool.

References:

[1] "compile failure due to undefined symbol",
    <https://sourceware.org/ml/binutils/2007-08/msg00476.html>

[2] same, <https://sourceware.org/ml/binutils/2007-09/msg00000.html>

[3] same, <https://sourceware.org/ml/binutils/2007-10/msg00019.html>

[4] same, <https://sourceware.org/ml/binutils/2007-10/msg00034.html>

	opcodes/
	* Makefile.am: Remove obsolete comment.
	* configure.ac: Refer `libbfd.la' to link shared BFD library
	except for Cygwin.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
2021-10-27 12:21:14 +01:00

658 lines
19 KiB
Makefile
Raw Blame History

## Process this file with automake to generate Makefile.in
#
# Copyright (C) 2012-2021 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING3. If not see
# <http://www.gnu.org/licenses/>.
#
AUTOMAKE_OPTIONS = foreign no-dist
ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
# Build '.' first so all generated files exist.
SUBDIRS = . po
INCDIR = $(srcdir)/../include
BFDDIR = $(srcdir)/../bfd
WARN_CFLAGS = @WARN_CFLAGS@
NO_WERROR = @NO_WERROR@
AM_CFLAGS = $(WARN_CFLAGS)
COMPILE_FOR_BUILD = $(CC_FOR_BUILD) $(INCLUDES) $(AM_CPPFLAGS) \
$(CFLAGS_FOR_BUILD)
LINK_FOR_BUILD = $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) \
$(LDFLAGS_FOR_BUILD) -o $@
libopcodes_la_LDFLAGS =
if INSTALL_LIBBFD
bfdlibdir = @bfdlibdir@
bfdincludedir = @bfdincludedir@
bfdlib_LTLIBRARIES = libopcodes.la
bfdinclude_DATA = $(INCDIR)/dis-asm.h
else
# Empty these so that the respective installation directories will not be created.
bfdlibdir =
bfdincludedir =
rpath_bfdlibdir = @bfdlibdir@
noinst_LTLIBRARIES = libopcodes.la
libopcodes_la_LDFLAGS += -rpath $(rpath_bfdlibdir)
endif
# This is where bfd.h lives.
BFD_H = ../bfd/bfd.h
BUILD_LIBS = @BUILD_LIBS@
BUILD_LIB_DEPS = @BUILD_LIB_DEPS@
# Header files.
HFILES = \
aarch64-asm.h aarch64-dis.h aarch64-opc.h aarch64-tbl.h \
bpf-desc.h bpf-opc.h \
cris-desc.h cris-opc.h \
epiphany-desc.h epiphany-opc.h \
fr30-desc.h fr30-opc.h \
frv-desc.h frv-opc.h \
i386-init.h \
i386-opc.h \
i386-tbl.h \
ia64-asmtab.h \
ia64-opc.h \
ip2k-desc.h ip2k-opc.h \
iq2000-desc.h iq2000-opc.h \
lm32-desc.h \
lm32-opc.h \
m32c-desc.h m32c-opc.h \
m32r-desc.h m32r-opc.h \
mcore-opc.h \
mep-desc.h mep-opc.h \
microblaze-opc.h \
mt-desc.h mt-opc.h \
score-opc.h \
sh-opc.h \
sysdep.h \
xc16x-desc.h xc16x-opc.h \
xstormy16-desc.h xstormy16-opc.h \
z8k-opc.h
# C source files that correspond to .o's ending up in libopcodes
# for all machines.
TARGET_LIBOPCODES_CFILES = \
aarch64-asm.c \
aarch64-asm-2.c \
aarch64-dis.c \
aarch64-dis-2.c \
aarch64-opc.c \
aarch64-opc-2.c \
alpha-dis.c \
alpha-opc.c \
arc-dis.c \
arc-ext.c \
arc-opc.c \
arm-dis.c \
avr-dis.c \
bfin-dis.c \
cgen-asm.c \
cgen-bitset.c \
cgen-dis.c \
cgen-opc.c \
cr16-dis.c \
cr16-opc.c \
cris-desc.c \
cris-dis.c \
cris-opc.c \
crx-dis.c \
crx-opc.c \
csky-dis.c \
d10v-dis.c \
d10v-opc.c \
d30v-dis.c \
d30v-opc.c \
dlx-dis.c \
bpf-asm.c \
bpf-desc.c \
bpf-dis.c \
bpf-ibld.c \
bpf-opc.c \
epiphany-asm.c \
epiphany-desc.c \
epiphany-dis.c \
epiphany-ibld.c \
epiphany-opc.c \
fr30-asm.c \
fr30-desc.c \
fr30-dis.c \
fr30-ibld.c \
fr30-opc.c \
frv-asm.c \
frv-desc.c \
frv-dis.c \
frv-ibld.c \
frv-opc.c \
ft32-dis.c \
ft32-opc.c \
h8300-dis.c \
hppa-dis.c \
i386-dis.c \
i386-opc.c \
ia64-dis.c \
ia64-opc.c \
ip2k-asm.c \
ip2k-desc.c \
ip2k-dis.c \
ip2k-ibld.c \
ip2k-opc.c \
iq2000-asm.c \
iq2000-desc.c \
iq2000-dis.c \
iq2000-ibld.c \
iq2000-opc.c \
lm32-asm.c \
lm32-desc.c \
lm32-dis.c \
lm32-ibld.c \
lm32-opc.c \
lm32-opinst.c \
loongarch-opc.c \
loongarch-dis.c \
loongarch-coder.c \
m10200-dis.c \
m10200-opc.c \
m10300-dis.c \
m10300-opc.c \
m32c-asm.c \
m32c-desc.c \
m32c-dis.c \
m32c-ibld.c \
m32c-opc.c \
m32r-asm.c \
m32r-desc.c \
m32r-dis.c \
m32r-ibld.c \
m32r-opc.c \
m32r-opinst.c \
m68hc11-dis.c \
m68hc11-opc.c \
m68k-dis.c \
m68k-opc.c \
s12z-dis.c \
s12z-opc.c \
mcore-dis.c \
mep-asm.c \
mep-desc.c \
mep-dis.c \
mep-ibld.c \
mep-opc.c \
metag-dis.c \
microblaze-dis.c \
micromips-opc.c \
mips-dis.c \
mips-opc.c \
mips16-opc.c \
mmix-dis.c \
mmix-opc.c \
moxie-dis.c \
moxie-opc.c \
msp430-decode.c \
msp430-dis.c \
mt-asm.c \
mt-desc.c \
mt-dis.c \
mt-ibld.c \
mt-opc.c \
nds32-asm.c \
nds32-dis.c \
nfp-dis.c \
nios2-dis.c \
nios2-opc.c \
ns32k-dis.c \
or1k-asm.c \
or1k-desc.c \
or1k-dis.c \
or1k-ibld.c \
or1k-opc.c \
pdp11-dis.c \
pdp11-opc.c \
pj-dis.c \
pj-opc.c \
ppc-dis.c \
ppc-opc.c \
pru-dis.c \
pru-opc.c \
riscv-dis.c \
riscv-opc.c \
rl78-decode.c \
rl78-dis.c \
rx-decode.c \
rx-dis.c \
s390-dis.c \
s390-opc.c \
score-dis.c \
score7-dis.c \
sh-dis.c \
sparc-dis.c \
sparc-opc.c \
spu-dis.c \
spu-opc.c \
tic30-dis.c \
tic4x-dis.c \
tic54x-dis.c \
tic54x-opc.c \
tic6x-dis.c \
tilegx-dis.c \
tilegx-opc.c \
tilepro-dis.c \
tilepro-opc.c \
v850-dis.c \
v850-opc.c \
vax-dis.c \
visium-dis.c \
visium-opc.c \
wasm32-dis.c \
xc16x-asm.c \
xc16x-desc.c \
xc16x-dis.c \
xc16x-ibld.c \
xc16x-opc.c \
xstormy16-asm.c \
xstormy16-desc.c \
xstormy16-dis.c \
xstormy16-ibld.c \
xstormy16-opc.c \
xtensa-dis.c \
xgate-dis.c \
xgate-opc.c \
z80-dis.c \
z8k-dis.c
# C source files that correspond to .o's ending up in libopcodes.
LIBOPCODES_CFILES = \
$(TARGET_LIBOPCODES_CFILES) \
dis-buf.c \
dis-init.c \
disassemble.c
# C source files that correspond to .o's.
CFILES = \
$(LIBOPCODES_CFILES) \
aarch64-gen.c \
i386-gen.c \
ia64-asmtab.c \
ia64-gen.c \
ia64-opc-a.c \
ia64-opc-b.c \
ia64-opc-f.c \
ia64-opc-i.c \
ia64-opc-m.c \
ia64-opc-d.c \
s390-mkopc.c \
z8kgen.c
ALL_MACHINES = $(TARGET_LIBOPCODES_CFILES:.c=.lo)
OFILES = @BFD_MACHINES@
# development.sh is used to determine -Werror default.
CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/development.sh
AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(INCDIR) -I$(BFDDIR) @HDEFINES@ @INCINTL@
disassemble.lo: disassemble.c
if am__fastdepCC
$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ @archdefs@ $(srcdir)/disassemble.c
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
else
if AMDEP
source='disassemble.c' object='$@' libtool=yes @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
$(LTCOMPILE) -c -o $@ @archdefs@ $(srcdir)/disassemble.c
endif
libopcodes_la_SOURCES = dis-buf.c disassemble.c dis-init.c
libopcodes_la_DEPENDENCIES = $(OFILES) @SHARED_DEPENDENCIES@
libopcodes_la_LIBADD = $(OFILES) @SHARED_LIBADD@
libopcodes_la_LDFLAGS += -release `cat ../bfd/libtool-soversion` @SHARED_LDFLAGS@
# Allow dependency tracking to work on all the source files.
EXTRA_libopcodes_la_SOURCES = $(LIBOPCODES_CFILES)
# libtool will build .libs/libopcodes.a. We create libopcodes.a in
# the build directory so that we don't have to convert all the
# programs that use libopcodes.a simultaneously. This is a hack which
# should be removed if everything else starts using libtool. FIXME.
noinst_LIBRARIES = libopcodes.a
libopcodes_a_SOURCES =
stamp-lib: libopcodes.la
libtooldir=`$(LIBTOOL) --config | sed -n -e 's/^objdir=//p'`; \
if [ -f $$libtooldir/libopcodes.a ]; then \
cp $$libtooldir/libopcodes.a libopcodes.tmp; \
$(RANLIB) libopcodes.tmp; \
$(SHELL) $(srcdir)/../move-if-change libopcodes.tmp libopcodes.a; \
else true; fi
touch stamp-lib
libopcodes.a: stamp-lib ; @true
POTFILES = $(HFILES) $(CFILES)
po/POTFILES.in: @MAINT@ Makefile
for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
&& mv tmp $(srcdir)/po/POTFILES.in
CLEANFILES = \
stamp-epiphany stamp-fr30 stamp-frv stamp-ip2k stamp-iq2000 stamp-lm32 \
stamp-m32c stamp-m32r stamp-mep stamp-mt \
stamp-or1k stamp-xc16x stamp-xstormy16 \
libopcodes.a stamp-lib
CGENDIR = @cgendir@
CPUDIR = $(srcdir)/../cpu
GUILE = `if test -f ../guile/libguile/guile ; then echo ../guile/libguile/guile; else echo guile ; fi`
CGEN = "$(GUILE) -l ${cgendir}/guile.scm -s"
CGENFLAGS = -v
CGENDEPS = \
$(CGENDIR)/desc.scm $(CGENDIR)/desc-cpu.scm \
$(CGENDIR)/opcodes.scm $(CGENDIR)/opc-asmdis.scm \
$(CGENDIR)/opc-ibld.scm $(CGENDIR)/opc-itab.scm \
$(CGENDIR)/opc-opinst.scm \
cgen-asm.in cgen-dis.in cgen-ibld.in
CGEN_CPUS = cris epiphany fr30 frv ip2k iq2000 lm32 m32c m32r mep mt or1k xc16x xstormy16
if CGEN_MAINT
BPF_DEPS = stamp-bpf
CRIS_DEPS = stamp-cris
EPIPHANY_DEPS = stamp-epiphany
FR30_DEPS = stamp-fr30
FRV_DEPS = stamp-frv
IP2K_DEPS = stamp-ip2k
IQ2000_DEPS = stamp-iq2000
LM32_DEPS = stamp-lm32
M32C_DEPS = stamp-m32c
M32R_DEPS = stamp-m32r
MEP_DEPS = stamp-mep
MT_DEPS = stamp-mt
OR1K_DEPS = stamp-or1k
XC16X_DEPS = stamp-xc16x
XSTORMY16_DEPS = stamp-xstormy16
else
BPF_DEPS =
CRIS_DEPS =
EPIPHANY_DEPS =
FR30_DEPS =
FRV_DEPS =
IP2K_DEPS =
IQ2000_DEPS =
LM32_DEPS =
M32C_DEPS =
M32R_DEPS =
MEP_DEPS =
MT_DEPS =
OR1K_DEPS =
XC16X_DEPS =
XSTORMY16_DEPS =
endif
run-cgen:
$(SHELL) $(srcdir)/cgen.sh opcodes $(srcdir) $(CGEN) \
$(CGENDIR) "$(CGENFLAGS)" $(arch) $(prefix) $(archfile) $(opcfile) \
"$(options)" "$(extrafiles)"
touch stamp-${prefix}
.PHONY: run-cgen
# Maintainer utility rule to regenerate all cgen files.
run-cgen-all:
for c in $(CGEN_CPUS) ; \
do \
$(MAKE) stamp-$$c || exit 1 ; \
done
.PHONY: run-cgen-all
# For now, require developers to configure with --enable-cgen-maint.
$(srcdir)/bpf-desc.h $(srcdir)/bpf-desc.c $(srcdir)/bpf-opc.h \
$(srcdir)/bpf-opc.c $(srcdir)/bpf-ibld.c \
$(srcdir)/bpf-asm.c $(srcdir)/bpf-dis.c: $(BPF_DEPS)
@true
stamp-bpf: $(CGENDEPS) $(CPUDIR)/bpf.cpu $(CPUDIR)/bpf.opc
$(MAKE) run-cgen arch=bpf prefix=bpf \
archfile=$(CPUDIR)/bpf.cpu opcfile=$(CPUDIR)/bpf.opc
$(srcdir)/cris-desc.h $(srcdir)/cris-desc.c $(srcdir)/cris-opc.h: $(CRIS_DEPS)
@true
stamp-cris: $(CGENDEPS) $(CPUDIR)/cris.cpu
$(SHELL) $(srcdir)/cgen.sh desc $(srcdir) $(CGEN) \
$(CGENDIR) "$(CGENFLAGS)" cris cris $(CPUDIR)/cris.cpu /dev/null \
"$(options)" "$(extrafiles)"
touch $@
$(srcdir)/epiphany-desc.h $(srcdir)/epiphany-desc.c $(srcdir)/epiphany-opc.h \
$(srcdir)/epiphany-opc.c $(srcdir)/epiphany-ibld.c \
$(srcdir)/epiphany-opinst.c $(srcdir)/epiphany-asm.c \
$(srcdir)/epiphany-dis.c: $(EPIPHANY_DEPS)
@true
stamp-epiphany: $(CGENDEPS) $(CPUDIR)/epiphany.cpu $(CPUDIR)/epiphany.opc
$(MAKE) run-cgen arch=epiphany prefix=epiphany options= \
archfile=$(CPUDIR)/epiphany.cpu opcfile=$(CPUDIR)/epiphany.opc extrafiles=
$(srcdir)/fr30-desc.h $(srcdir)/fr30-desc.c $(srcdir)/fr30-opc.h $(srcdir)/fr30-opc.c $(srcdir)/fr30-ibld.c $(srcdir)/fr30-asm.c $(srcdir)/fr30-dis.c: $(FR30_DEPS)
@true
stamp-fr30: $(CGENDEPS) $(CPUDIR)/fr30.cpu $(CPUDIR)/fr30.opc
$(MAKE) run-cgen arch=fr30 prefix=fr30 options= \
archfile=$(CPUDIR)/fr30.cpu opcfile=$(CPUDIR)/fr30.opc extrafiles=
$(srcdir)/frv-desc.h $(srcdir)/frv-desc.c $(srcdir)/frv-opc.h $(srcdir)/frv-opc.c $(srcdir)/frv-ibld.c $(srcdir)/frv-asm.c $(srcdir)/frv-dis.c: $(FRV_DEPS)
@true
stamp-frv: $(CGENDEPS) $(CPUDIR)/frv.cpu $(CPUDIR)/frv.opc
$(MAKE) run-cgen arch=frv prefix=frv options= \
archfile=$(CPUDIR)/frv.cpu opcfile=$(CPUDIR)/frv.opc extrafiles=
$(srcdir)/ip2k-desc.h $(srcdir)/ip2k-desc.c $(srcdir)/ip2k-opc.h $(srcdir)/ip2k-opc.c $(srcdir)/ip2k-ibld.c $(srcdir)/ip2k-asm.c $(srcdir)/ip2k-dis.c: $(IP2K_DEPS)
@true
stamp-ip2k: $(CGENDEPS) $(CPUDIR)/ip2k.cpu $(CPUDIR)/ip2k.opc
$(MAKE) run-cgen arch=ip2k prefix=ip2k options= \
archfile=$(CPUDIR)/ip2k.cpu opcfile=$(CPUDIR)/ip2k.opc extrafiles=
$(srcdir)/iq2000-desc.h $(srcdir)/iq2000-desc.c $(srcdir)/iq2000-opc.h $(srcdir)/iq2000-opc.c $(srcdir)/iq2000-ibld.c $(srcdir)/iq2000-asm.c $(srcdir)/iq2000-dis.c: $(IQ2000_DEPS)
@true
stamp-iq2000: $(CGENDEPS) $(CPUDIR)/iq2000.cpu \
$(CPUDIR)/iq2000.opc $(CPUDIR)/iq2000m.cpu \
$(CPUDIR)/iq10.cpu
$(MAKE) run-cgen arch=iq2000 prefix=iq2000 options= \
archfile=$(CPUDIR)/iq2000.cpu \
opcfile=$(CPUDIR)/iq2000.opc extrafiles=
$(srcdir)lm32-desc.h $(srcdir)/lm32-desc.c $(srcdir)/lm32-opc.h $(srcdir)/lm32-opc.c $(srcdir)/lm32-ibld.c $(srcdir)/lm32-opinst.c $(srcdir)/lm32-asm.c $(srcdir)/lm32-dis.c: $(LM32_DEPS)
@true
stamp-lm32: $(CGENDEPS) $(CPUDIR)/lm32.cpu $(CPUDIR)/lm32.opc
$(MAKE) run-cgen arch=lm32 prefix=lm32 options=opinst \
archfile=$(CPUDIR)/lm32.cpu \
opcfile=$(CPUDIR)/lm32.opc \
extrafiles=opinst
$(srcdir)/m32c-desc.h $(srcdir)/m32c-desc.c $(srcdir)/m32c-opc.h $(srcdir)/m32c-opc.c $(srcdir)/m32c-ibld.c $(srcdir)/m32c-asm.c $(srcdir)/m32c-dis.c: $(M32C_DEPS)
@true
stamp-m32c: $(CGENDEPS) $(CPUDIR)/m32c.cpu $(CPUDIR)/m32c.opc
$(MAKE) run-cgen arch=m32c prefix=m32c options= \
archfile=$(CPUDIR)/m32c.cpu \
opcfile=$(CPUDIR)/m32c.opc extrafiles=
$(srcdir)/m32r-desc.h $(srcdir)/m32r-desc.c $(srcdir)/m32r-opc.h $(srcdir)/m32r-opc.c $(srcdir)/m32r-ibld.c $(srcdir)/m32r-opinst.c $(srcdir)/m32r-asm.c $(srcdir)/m32r-dis.c: $(M32R_DEPS)
@true
stamp-m32r: $(CGENDEPS) $(CPUDIR)/m32r.cpu $(CPUDIR)/m32r.opc
$(MAKE) run-cgen arch=m32r prefix=m32r options=opinst \
archfile=$(CPUDIR)/m32r.cpu \
opcfile=$(CPUDIR)/m32r.opc extrafiles=opinst
$(srcdir)/mep-desc.h $(srcdir)/mep-desc.c $(srcdir)/mep-opc.h $(srcdir)/mep-opc.c $(srcdir)/mep-ibld.c $(srcdir)/mep-asm.c $(srcdir)/mep-dis.c: $(MEP_DEPS)
@true
stamp-mep: $(CGENDEPS) $(CPUDIR)/mep.cpu $(CPUDIR)/mep-default.cpu $(CPUDIR)/mep-core.cpu $(CPUDIR)/mep-h1.cpu $(CPUDIR)/mep-ext-cop.cpu $(CPUDIR)/mep-sample-ucidsp.cpu $(CPUDIR)/mep-rhcop.cpu $(CPUDIR)/mep-fmax.cpu $(CPUDIR)/mep.opc
$(MAKE) run-cgen arch=mep prefix=mep options= \
archfile=$(CPUDIR)/mep.cpu opcfile=$(CPUDIR)/mep.opc extrafiles=
$(srcdir)/mt-desc.h $(srcdir)/mt-desc.c $(srcdir)/mt-opc.h $(srcdir)/mt-opc.c $(srcdir)/mt-ibld.c $(srcdir)/mt-asm.c $(srcdir)/mt-dis.c: $(MT_DEPS)
@true
stamp-mt: $(CGENDEPS) $(CPUDIR)/mt.cpu $(CPUDIR)/mt.opc
$(MAKE) run-cgen arch=mt prefix=mt options= \
archfile=$(CPUDIR)/mt.cpu \
opcfile=$(CPUDIR)/mt.opc extrafiles=
$(srcdir)/or1k-desc.h $(srcdir)/or1k-desc.c $(srcdir)/or1k-opc.h $(srcdir)/or1k-opc.c $(srcdir)/or1k-ibld.c $(srcdir)/or1k-opinst.c $(srcdir)/or1k-asm.c $(srcdir)/or1k-dis.c: $(OR1K_DEPS)
@true
stamp-or1k: $(CGENDEPS) $(CPUDIR)/or1k.cpu $(CPUDIR)/or1k.opc $(CPUDIR)/or1kcommon.cpu $(CPUDIR)/or1korbis.cpu $(CPUDIR)/or1korfpx.cpu
$(MAKE) run-cgen arch=or1k prefix=or1k options=opinst \
archfile=$(CPUDIR)/or1k.cpu opcfile=$(CPUDIR)/or1k.opc extrafiles=opinst
$(srcdir)/xc16x-desc.h $(srcdir)/xc16x-desc.c $(srcdir)/xc16x-opc.h $(srcdir)/xc16x-opc.c $(srcdir)/xc16x-ibld.c $(srcdir)/xc16x-asm.c $(srcdir)/xc16x-dis.c: $(XC16X_DEPS)
@true
stamp-xc16x: $(CGENDEPS) $(CPUDIR)/xc16x.cpu $(CPUDIR)/xc16x.opc
$(MAKE) run-cgen arch=xc16x prefix=xc16x options= \
archfile=$(CPUDIR)/xc16x.cpu \
opcfile=$(CPUDIR)/xc16x.opc \
extrafiles=
$(srcdir)/xstormy16-desc.h $(srcdir)/xstormy16-desc.c $(srcdir)/xstormy16-opc.h $(srcdir)/xstormy16-opc.c $(srcdir)/xstormy16-ibld.c $(srcdir)/xstormy16-asm.c $(srcdir)/xstormy16-dis.c: $(XSTORMY16_DEPS)
@true
stamp-xstormy16: $(CGENDEPS) $(CPUDIR)/xstormy16.cpu $(CPUDIR)/xstormy16.opc
$(MAKE) run-cgen arch=xstormy16 prefix=xstormy16 options= \
archfile=$(CPUDIR)/xstormy16.cpu opcfile=$(CPUDIR)/xstormy16.opc extrafiles=
MOSTLYCLEANFILES = aarch64-gen$(EXEEXT_FOR_BUILD) i386-gen$(EXEEXT_FOR_BUILD) \
ia64-gen$(EXEEXT_FOR_BUILD) s390-mkopc$(EXEEXT_FOR_BUILD) s390-opc.tab \
z8kgen$(EXEEXT_FOR_BUILD) opc2c$(EXEEXT_FOR_BUILD)
MAINTAINERCLEANFILES = $(srcdir)/aarch64-asm-2.c $(srcdir)/aarch64-dis-2.c \
$(srcdir)/aarch64-opc-2.c $(srcdir)/i386-tbl.h $(srcdir)/i386-init.h \
$(srcdir)/ia64-asmtab.c $(srcdir)/z8k-opc.h \
$(srcdir)/msp430-decode.c \
$(srcdir)/rl78-decode.c \
$(srcdir)/rx-decode.c
aarch64-gen$(EXEEXT_FOR_BUILD): aarch64-gen.o $(BUILD_LIB_DEPS)
$(LINK_FOR_BUILD) aarch64-gen.o $(BUILD_LIBS)
aarch64-gen.o: aarch64-gen.c $(BFD_H) $(INCDIR)/getopt.h $(INCDIR)/libiberty.h\
$(INCDIR)/opcode/aarch64.h config.h aarch64-opc.h aarch64-tbl.h
$(COMPILE_FOR_BUILD) -c $(srcdir)/aarch64-gen.c
$(srcdir)/aarch64-asm-2.c: @MAINT@ aarch64-gen$(exeext_for_build)
./aarch64-gen$(exeext_for_build) --gen-asm > $@
$(srcdir)/aarch64-dis-2.c: @MAINT@ aarch64-gen$(exeext_for_build)
./aarch64-gen$(exeext_for_build) --gen-dis > $@
$(srcdir)/aarch64-opc-2.c: @MAINT@ aarch64-gen$(exeext_for_build)
./aarch64-gen$(exeext_for_build) --gen-opc > $@
i386-gen$(EXEEXT_FOR_BUILD): i386-gen.o $(BUILD_LIB_DEPS)
$(LINK_FOR_BUILD) i386-gen.o $(BUILD_LIBS)
i386-gen.o: i386-gen.c i386-opc.h $(srcdir)/../include/opcode/i386.h \
$(INCDIR)/ansidecl.h $(INCDIR)/getopt.h $(INCDIR)/hashtab.h \
$(INCDIR)/libiberty.h $(INCDIR)/opcode/i386.h $(INCDIR)/safe-ctype.h \
config.h i386-opc.h sysdep.h
$(COMPILE_FOR_BUILD) -c $(srcdir)/i386-gen.c
$(srcdir)/i386-tbl.h: $(srcdir)/i386-init.h
@echo $@
$(srcdir)/i386-init.h: @MAINT@ i386-gen$(EXEEXT_FOR_BUILD) i386-opc.tbl i386-reg.tbl i386-opc.h
$(CPP) -P $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) - \
< $(srcdir)/i386-opc.tbl \
| ./i386-gen$(EXEEXT_FOR_BUILD) --srcdir $(srcdir)
i386-opc.lo: $(srcdir)/i386-tbl.h
ia64-gen$(EXEEXT_FOR_BUILD): ia64-gen.o $(BUILD_LIB_DEPS)
$(LINK_FOR_BUILD) ia64-gen.o $(BUILD_LIBS)
ia64-gen.o: ia64-gen.c $(BFD_H) $(INCDIR)/ansidecl.h $(INCDIR)/getopt.h \
$(INCDIR)/libiberty.h $(INCDIR)/opcode/ia64.h $(INCDIR)/safe-ctype.h \
$(INCDIR)/symcat.h config.h ia64-opc-a.c ia64-opc-b.c \
ia64-opc-d.c ia64-opc-f.c ia64-opc-i.c ia64-opc-m.c \
ia64-opc-x.c ia64-opc.h sysdep.h
$(COMPILE_FOR_BUILD) -c $(srcdir)/ia64-gen.c
# Use a helper variable for the dependencies to avoid 'make' issues
# with continuations in comments, as @MAINT@ can be expanded to '#'.
ia64_asmtab_deps = ia64-gen$(EXEEXT_FOR_BUILD) ia64-ic.tbl \
ia64-raw.tbl ia64-waw.tbl ia64-war.tbl
$(srcdir)/ia64-asmtab.c: @MAINT@ $(ia64_asmtab_deps)
./ia64-gen$(EXEEXT_FOR_BUILD) --srcdir $(srcdir) > $@
ia64-opc.lo: $(srcdir)/ia64-asmtab.c
$(srcdir)/msp430-decode.c: @MAINT@ $(srcdir)/msp430-decode.opc opc2c$(EXEEXT_FOR_BUILD)
./opc2c$(EXEEXT_FOR_BUILD) $(srcdir)/msp430-decode.opc > $(srcdir)/msp430-decode.c
$(srcdir)/rl78-decode.c: @MAINT@ $(srcdir)/rl78-decode.opc opc2c$(EXEEXT_FOR_BUILD)
./opc2c$(EXEEXT_FOR_BUILD) $(srcdir)/rl78-decode.opc > $(srcdir)/rl78-decode.c
$(srcdir)/rx-decode.c: @MAINT@ $(srcdir)/rx-decode.opc opc2c$(EXEEXT_FOR_BUILD)
./opc2c$(EXEEXT_FOR_BUILD) $(srcdir)/rx-decode.opc > $(srcdir)/rx-decode.c
opc2c$(EXEEXT_FOR_BUILD): opc2c.o $(BUILD_LIBS_DEPS)
$(LINK_FOR_BUILD) opc2c.o $(BUILD_LIBS)
opc2c.o: opc2c.c $(INCDIR)/libiberty.h
$(COMPILE_FOR_BUILD) -c $(srcdir)/opc2c.c
s390-mkopc$(EXEEXT_FOR_BUILD): s390-mkopc.c
$(COMPILE_FOR_BUILD) -o s390-mkopc $(srcdir)/s390-mkopc.c
s390-opc.tab: s390-mkopc$(EXEEXT_FOR_BUILD) s390-opc.txt
./s390-mkopc$(EXEEXT_FOR_BUILD) < $(srcdir)/s390-opc.txt > s390-opc.tab
s390-opc.lo: s390-opc.tab
z8kgen$(EXEEXT_FOR_BUILD): z8kgen.o $(BUILD_LIB_DEPS)
$(LINK_FOR_BUILD) z8kgen.o $(BUILD_LIBS)
z8kgen.o: z8kgen.c
$(COMPILE_FOR_BUILD) -c $(srcdir)/z8kgen.c
$(srcdir)/z8k-opc.h: @MAINT@ z8kgen$(EXEEXT_FOR_BUILD)
./z8kgen$(EXEEXT_FOR_BUILD) -a > $@
z8k-dis.lo: $(srcdir)/z8k-opc.h
MIPS_DEFS=`case \`cat ../bfd/ofiles\` in *elfxx-mips*) echo "-DHAVE_BFD_MIPS_ELF_GET_ABIFLAGS=1";; esac`
mips-dis.lo: mips-dis.c
if am__fastdepCC
$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(MIPS_DEFS) $<
$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
else
if AMDEP
source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
$(LTCOMPILE) -c -o $@ $(MIPS_DEFS) $<
endif
sh-dis.lo: sh-dis.c
if am__fastdepCC
$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ @archdefs@ $(srcdir)/sh-dis.c
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
else
if AMDEP
source='sh-dis.c' object='$@' libtool=yes @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
$(LTCOMPILE) -c -o $@ @archdefs@ $(srcdir)/sh-dis.c
endif
Reference in New Issue View Git Blame Copy Permalink