binutils-gdb/gdb/config/i386/xm-symmetry.h
Jim Kingdon 82a2edfbcf * breakpoint.c, breakpoint.h, c-valprint.c, ch-valprint.c,
cp-valprint.c, eval.c, expprint.c, findvar.c, language.c,
	objfiles.h, infcmd.c, printcmd.c, stack.c, typeprint.c,
	valarith.c, valops.c, valprint.c, value.h, values.c: Replace
	value with value_ptr.  This is for the ptx compiler.
	* objfiles.h, target.h: Don't declare a "sec_ptr" field using a
	"sec_ptr" typedef.
	* symm-nat.c: Add a bunch of stuff for symmetry's ptrace stuff.
	#if 0 i386_float_info.
	* symm-tdep.c (round): Remove.  Also remove sgttyb.
	* symm-tdep.c: Remove lots of stuff which duplicates stuff from
	i386-tdep.c.  Remove register_addr and ptx_coff_regno_to_gdb.
	* i386-tdep.c (i386_frame_find_saved_regs): Put in
	I386_REGNO_TO_SYMMETRY check in case it is needed for Dynix
	someday.
	* config/i386/nm-symmetry.h: Change KERNEL_U_ADDR.  Move
	stuff from PTRACE_READ_REGS, PTRACE_WRITE_REGS macros to
	symm-nat.c.  Define CHILD_WAIT and declare child_wait().
	* config/i386/tm-symmetry.h: Remove call function stuff; stuff in
	tm-i386v.h is apparently OK.
	* config/i386/xm-symmetry.h [_SEQUENT_]: Define HAVE_TERMIOS not
	HAVE_TERMIO.  Define MEM_FNS_DECLARED, NEED_POSIX_SETPGID, and
	USE_O_NOCTTY.
1994-03-03 01:00:57 +00:00

160 lines
4.4 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Definitions to make GDB run on a Sequent Symmetry under
dynix 3.1 and ptx 1.3, with Weitek 1167 and i387 support.
Copyright 1986, 1987, 1989, 1992, 1993 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
/* Symmetry version by Jay Vosburgh (fubar@sequent.com) */
/* This machine doesn't have the siginterrupt call. */
#define NO_SIGINTERRUPT
#define HAVE_WAIT_STRUCT
#ifdef _SEQUENT_
/* ptx */
#define HAVE_TERMIOS
#define USG
#define MEM_FNS_DECLARED
#define NEED_POSIX_SETPGID
#define USE_O_NOCTTY
#else
/* dynix */
/* Get rid of any system-imposed stack limit if possible. */
#define SET_STACK_LIMIT_HUGE
#endif
/* XPT_DEBUG doesn't work yet under Dynix 3.0.12, but UNDEBUG does... */
/* #define PTRACE_ATTACH XPT_DEBUG
#define PTRACE_DETACH XPT_UNDEBUG
#define ATTACH_DETACH */
#ifdef _SEQUENT_
/* ptx does attach as of ptx version 2.1 */
#define ATTACH_DETACH 1
#define HOST_BYTE_ORDER LITTLE_ENDIAN
/* We must fetch all the regs before storing, since we store all at once. */
#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES)
/* Interface definitions for kernel debugger KDB. */
/* This doesn't work... */
/* Map machine fault codes into signal numbers.
First subtract 0, divide by 4, then index in a table.
Faults for which the entry in this table is 0
are not handled by KDB; the program's own trap handler
gets to handle then. */
#define FAULT_CODE_ORIGIN 0
#define FAULT_CODE_UNITS 4
#define FAULT_TABLE \
{ 0, SIGKILL, SIGSEGV, 0, 0, 0, 0, 0, \
0, 0, SIGTRAP, SIGTRAP, 0, 0, 0, 0, \
0, 0, 0, 0, 0, 0, 0, 0}
/* Start running with a stack stretching from BEG to END.
BEG and END should be symbols meaningful to the assembler.
This is used only for kdb. */
#define INIT_STACK(beg, end) \
{ asm (".globl end"); \
asm ("movl $ end, %esp"); \
asm ("movl %ebp, $0"); }
/* Push the frame pointer register on the stack. */
#define PUSH_FRAME_PTR \
asm ("pushl %ebp");
/* Copy the top-of-stack to the frame pointer register. */
#define POP_FRAME_PTR \
asm ("movl (%esp), %ebp");
/* After KDB is entered by a fault, push all registers
that GDB thinks about (all NUM_REGS of them),
so that they appear in order of ascending GDB register number.
The fault code will be on the stack beyond the last register. */
#define PUSH_REGISTERS \
{ asm("pushad"); }
/*
{ asm("pushl %eax"); \
asm("pushl %edx"); \
asm("pushl %ecx"); \
asm("pushl %st(0)"); \
asm("pushl %st(1)"); \
asm("pushl %ebx"); \
asm("pushl %esi"); \
asm("pushl %edi"); \
asm("pushl %st(2)"); \
asm("pushl %st(3)"); \
asm("pushl %st(4)"); \
asm("pushl %st(5)"); \
asm("pushl %st(6)"); \
asm("pushl %st(7)"); \
asm("pushl %esp"); \
asm("pushl %ebp"); \
asm("pushl %eip"); \
asm("pushl %eflags"); \
asm("pushl %fp1"); \
asm("pushl %fp2"); \
asm("pushl %fp3"); \
asm("pushl %fp4"); \
asm("pushl %fp5"); \
asm("pushl %fp6"); \
asm("pushl %fp7"); \
asm("pushl %fp8"); \
asm("pushl %fp9"); \
asm("pushl %fp10"); \
asm("pushl %fp11"); \
asm("pushl %fp12"); \
asm("pushl %fp13"); \
asm("pushl %fp14"); \
asm("pushl %fp15"); \
asm("pushl %fp16"); \
asm("pushl %fp17"); \
asm("pushl %fp18"); \
asm("pushl %fp19"); \
asm("pushl %fp20"); \
asm("pushl %fp21"); \
asm("pushl %fp22"); \
asm("pushl %fp23"); \
asm("pushl %fp24"); \
asm("pushl %fp25"); \
asm("pushl %fp26"); \
asm("pushl %fp27"); \
asm("pushl %fp28"); \
asm("pushl %fp29"); \
asm("pushl %fp30"); \
asm("pushl %fp31"); \
}
*/
/* Assuming the registers (including processor status) have been
pushed on the stack in order of ascending GDB register number,
restore them and return to the address in the saved PC register. */
#define POP_REGISTERS \
{ asm ("popad"); }