binutils-gdb/gdb/testsuite/config/monitor.exp
1999-04-26 18:34:20 +00:00

234 lines
5.9 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Test Framework Driver for GDB driving a ROM monitor (via monitor.c).
# Copyright 1995, 1997 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
load_lib gdb.exp
puts "***** DID USE MONITOR ******"
#
# gdb_target_monitor
# Set gdb to target the monitor
#
proc gdb_target_monitor { exec_file } {
global gdb_prompt
global exit_status
global timeout
if [target_info exists gdb_protocol] {
set targetname "[target_info gdb_protocol]"
} else {
perror "No protocol specified for [target_info name].";
return -1;
}
if [target_info exists baud] {
gdb_test "set remotebaud [target_info baud]" "" ""
}
if [target_info exists binarydownload] {
gdb_test "set remotebinarydownload [target_info binarydownload]" "" ""
}
if [target_info exists gdb_serial] {
set serialport "[target_info gdb_serial]";
} elseif [target_info exists netport] {
set serialport "[target_info netport]"
} else {
set serialport "[target_info serial]"
}
for {set j 1} {$j <= 2} {incr j} {
if [gdb_file_cmd $exec_file] { return -1; }
for {set i 1} {$i <= 3} {incr i} {
send_gdb "target $targetname $serialport\n"
gdb_expect 60 {
-re "A program is being debugged already.*ill it.*y or n. $" {
send_gdb "y\n";
exp_continue;
}
-re "Couldn't establish connection to remote.*$gdb_prompt" {
verbose "Connection failed";
}
-re "Remote MIPS debugging.*$gdb_prompt" {
verbose "Set target to $targetname";
return 0;
}
-re "Remote debugging using .*$serialport.*$gdb_prompt" {
verbose "Set target to $targetname";
return 0;
}
-re "Remote target $targetname connected to.*$gdb_prompt" {
verbose "Set target to $targetname";
return 0;
}
-re "Connected to.*$gdb_prompt" {
verbose "Set target to $targetname";
return 0;
}
-re "Ending remote.*$gdb_prompt" { }
-re "Connection refused.*$gdb_prompt" {
verbose "Connection refused by remote target. Pausing, and trying again."
sleep 30
continue
}
-re "Timeout reading from remote system.*$gdb_prompt" {
verbose "Got timeout error from gdb.";
}
timeout {
send_gdb "";
break
}
}
}
gdb_target_exec;
if { $j == 1 && ![reboot_target] } {
break;
}
}
perror "Couldn't set target for $targetname, port is $serialport.";
return -1;
}
proc gdb_target_exec { } {
gdb_test "target exec" "No executable file now." "" ".*Kill it.*y or n.*" "y"
}
#
# gdb_load -- load a file into the debugger.
# return a -1 if anything goes wrong.
#
proc gdb_load { arg } {
global verbose
global loadpath
global loadfile
global GDB
global gdb_prompt
global timeout
global last_gdb_file;
if { $arg == "" } {
if [info exists last_gdb_file] {
set arg $last_gdb_file;
} else {
send_gdb "info files\n";
gdb_expect 30 {
-re "Symbols from \"(\[^\"\]+)\"" {
set arg $expect_out(1,string);
exp_continue;
}
-re "Local exec file:\[\r\n\]+\[ \t\]*`(\[^'\]+)'," {
set arg $expect_out(1,string);
exp_continue;
}
-re "$gdb_prompt $" { }
}
}
}
set last_gdb_file $arg;
for { set j 1; } { $j <= 2 } {incr j; } {
if [target_info exists gdb,use_standard_load] {
gdb_target_exec;
if ![target_info exists gdb,no_push_conn] {
remote_push_conn host;
}
set state [remote_ld target $arg];
if ![target_info exists gdb,no_push_conn] {
remote_close target;
remote_pop_conn host;
}
if { $state == "pass" } {
if [gdb_target_monitor $arg] { return -1; }
gdb_test "list main" ".*" ""
verbose "Loaded $arg into $GDB\n";
return 0;
}
} else {
if [gdb_target_monitor $arg] { return -1 }
if [is_remote host] {
# FIXME: Multiple downloads. bleah.
set farg [remote_download host $arg];
} else {
set farg $arg;
}
if { $arg != "" && [target_info exists gdb_sect_offset] } {
set textoff [target_info gdb_sect_offset];
send_gdb "sect .text $textoff\n";
gdb_expect 30 {
-re "(0x\[0-9a-z]+) - 0x\[0-9a-z\]+ is \\.data" {
set dataoff $expect_out(1,string);
exp_continue;
}
-re "(0x\[0-9a-z\]+) - 0x\[0-9a-z\]+ is \\.bss" {
set bssoff $expect_out(1,string);
exp_continue;
}
-re "$gdb_prompt" { }
}
set dataoff [format 0x%x [expr $dataoff + $textoff]];
set bssoff [format 0x%x [expr $bssoff + $textoff]];
send_gdb "sect .data $dataoff\n";
gdb_expect 30 {
-re "$gdb_prompt" { }
}
send_gdb "sect .bss $bssoff\n";
gdb_expect 30 {
-re "$gdb_prompt" { }
}
}
verbose "Loading $farg"
if [target_info exists gdb_load_offset] {
set command "load $farg [target_info gdb_load_offset]\n";
} else {
set command "load $farg\n";
}
send_gdb $command;
gdb_expect 1600 {
-re "\[Ff\]ailed.*$gdb_prompt $" {
verbose "load failed";
}
-re "Timeout reading from remote.*$gdb_prompt" {
}
-re "$gdb_prompt $" {
verbose "Loaded $farg into $GDB\n"
return 0;
}
timeout {
if { $verbose > 1 } {
perror "Timed out trying to load $farg."
}
}
}
}
# Make sure we don't have an open connection to the target.
gdb_target_exec;
if { $j == 1 } {
if { ![reboot_target] } {
break;
}
}
}
perror "Couldn't load file into GDB.";
return -1;
}