mirror/binutils-gdb
2
0
Fork 0
mirror of https://sourceware.org/git/binutils-gdb.git synced 2025-02-11 13:02:10 +08:00
Code Issues Packages Projects Releases Wiki Activity
db2e4d67e7
binutils-gdb/sim/rx/ChangeLog
Mike Frysinger db2e4d67e7 sim: generate build dependencies on the fly 
Lift the code that GDB is using to generate dependencies on the fly and
port it over to the sim.  Now people shouldn't have to manually maintain
these in their Makefile's.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-12-03 18:23:51 +00:00

192 lines
5.5 KiB
Plaintext
Raw Blame History

2011-12-03 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4: New file.
* configure: Regenerate.
2011-10-17 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Change include to common/acinclude.m4.
2011-10-17 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
call. Replace common.m4 include with SIM_AC_COMMON.
* configure: Regenerate.
2011-07-11 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Rename from configure.in.
2011-07-11 Mike Frysinger <vapier@gentoo.org>
* configure.in: Add "dnl" before copyright notice.
2011-04-16 Mike Frysinger <vapier@gentoo.org>
* gdb-if.c (sim_complete_command): New stub function.
2011-01-11 Andrew Burgess <aburgess@broadcom.com>
* gdb-if.c (sim_store_register): Update return value to
match new API.
2010-12-14 DJ Delorie <dj@redhat.com>
* rx.c (decode_opcode): For "MVFC PC,", use the address of the
opcode, not the address following the opcode.
(decode_opcode): RXO_branchrel is relative to the opcode's PC, not
the address following the opcode.
2010-11-11 DJ Delorie <dj@redhat.com>
* rx.c (lsb_count): New.
(divu_cycles): New.
(div_cycles): New.
(decode_opcode): Fix cycle count math for div, divu, suntil, and
swhile.
2010-09-29 Kevin Buettner <kevinb@redhat.com>
* mem.c (rx_mem_ptr): When invalidating the decode cache, account
for the fact that the instruction decoder never uses swapped
addresses.
2010-09-29 Nick Clifton <nickc@redhat.com>
* rx.c (decode_opcode: RXO_int): Only break out of the emulation
loop if rx_syscall() does not return a RX_STEPPED result.
2010-09-23 Kevin Buettner <kevinb@redhat.com>
* rx.c (decode_opcode): Add cycle information for RXO_smovu.
2010-09-23 Kevin Buettner <kevinb@redhat.com>
* fpu.c, gdb-if.c, load.c, misc.c, syscalls.c (config.h): Include.
* rx.c (decode_opcode): Declare `tx' as unsigned.
* cpu.h (reset_decoder): Declare.
* load.c (rx_load): Call `reset_decoder'.
* rx.c (reset_decoder): New function.
2010-07-29 DJ Delorie <dj@redhat.com>
* rx.c (decode_cache_base): New.
(id_names): Remove ediv and edivu.
(optype_names): Add TwoReg.
(maybe_get_mem_page): New.
(rx_get_byte): Call it.
(get_op): Add TwoReg support.
(put_op): Likewise.
(PD, PS, PS2, GD, GS, GS2, DSZ, SSZ, S2SZ, US1, US2, OM): "opcode"
is a pointer now.
(DO_RETURN): New. We use longjmp to return an exception result.
(decode_opcode): Make opcode a pointer to the decode cache. Save
decoded opcode information and re-use. Call DO_RETURN instead of
return throughout. Remove ediv and edivu.
* mem.c (ptdc): New. Adds decode cache.
(rx_mem_ptr): Support it.
(rx_mem_decode_cache): New.
* mem.h (enum mem_ptr_action): add MPA_DECODE_CACHE.
(rx_mem_decode_cache): Declare.
* gdb-if.c (sim_resume): Add decode_opcode's setjmp logic here...
* main.c (main): ...and here. Use a fast loop if neither trace
nor disassemble is given.
* cpu.h (RX_MAKE_STEPPED, RX_MAKE_HIT_BREAK, RX_MAKE_EXITED,
RX_MAKE_STOPPED, RX_EXITED, RX_STOPPED): Adjust so that 0 is not a
valid code for anything.
2010-07-27 DJ Delorie <dj@redhat.com>
* README.txt: New.
* config.h (CYCLE_ACCURATE, CYCLE_STATS): New.
* configure.in (--enable-cycle-accurate, --enable-cycle-stats):
New. Default to enabled.
* configure: Regenerate.
* cpu.h (regs_type): Add cycle tracking info.
(reset_pipeline_stats): Declare.
(halt_pipeline_stats): Declare.
(pipeline_stats): Declare.
* main.c (done): Call pipeline_stats().
* mem.h (rx_mem_ptr): Moved to here ...
* mem.c (mem_ptr): ... from here. Rename throughout.
(mem_put_byte): Move LEDs to Port A. Add Port B to control cycle
statistics. Move UART to SCI4.
(mem_put_hi): Add TPU 1-2. TPU 1 and 2 count CPU cycles.
* reg.c (init_regs): Set Rt reg to -1 (no reg).
* rx.c: Add cycle counting and statistics throughout.
(rx_get_byte): Optimize for speed.
(decode_opcode): Likewise.
(reset_pipeline_stats): New.
(halt_pipeline_stats): New.
(pipeline_stats): New.
* trace.c (sim_disasm_one): Print cycle count.
2010-07-07 Kevin Buettner <kevinb@redhat.com>
* gdb-if.c (sim_store_register): Add case for sim_rx_acc_regnum.
2010-06-24 Kevin Buettner <kevinb@redhat.com>
* gdb-if.c (trace.h): Include.
(reg_size, sim_fetch_register): Add cases for sim_rx_acc_regnum.
2010-06-07 Nick Clifton <nickc@redhat.com>
* reg.c (set_oszc): Use unsigned int for the mask.
(set_szc, set_osz, set_sz): Likewise.
2010-05-28 Kevin Buettner <kevinb@redhat.com>
* gdb-if.c (sim_do_command): Add a "sim verbose noisy" command.
2010-04-14 Mike Frysinger <vapier@gentoo.org>
* gdb-if.c (sim_write): Add const to buf arg.
2010-01-30 Masaki Muranaka <monaka@monami-software.com>
* configure.in: Check if the host has getopt.h.
* configure: Regenerate.
* config.in: Regenerate.
* main.c: Include config.h.
Use HAVE_STDLIB_H, HAVE_UNISTD_H, HAVE_GETOPT_H.
Include getopt.h in case HAVE_GETOPT_H is defined.
2009-12-22 Yoshinori Sato <ysato@users.sourceforge.jp>
* rx/rx.c (decode_opcode): btst bit address mask fix.
2009-11-30 DJ Delorie <dj@redhat.com>
* rx/rx.c (decode_opcode): fix SWHILE logic.
2009-10-27 DJ Delorie <dj@redhat.com>
Kevin Buettner <kevinb@redhat.com>
* load.h: New.
* rx.c: New.
* syscalls.c: New.
* syscalls.h: New.
* load.c: New.
* configure.in: New.
* gdb-if.c: New.
* err.c: New.
* cpu.h: New.
* Makefile.in: New.
* fpu.c: New.
* mem.c: New.
* config.in: New.
* err.h: New.
* reg.c: New.
* mem.h: New.
* main.c: New.
* misc.h: New.
* trace.c: New.
* misc.c: New.
* syscall.h: New.
* trace.h: New.
* fpu.h: New.
Reference in New Issue View Git Blame Copy Permalink