mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-11-21 01:12:32 +08:00
d9951af428
mswin/libwingdb.a and remote-wiggler.o.
* breakpoint.c (breakpoint_here_p): Clean up bp enabled test.
* (breakpoint_inserted_here_p): New func, just like
breakpoint_here_p, except it's honest. Honestly.
* breakpoint.h: Proto for above.
start-sanitize-gdbtk
* configure configure.in: Add host *windows* to list of hosts
that don't support GDBtk.
end-sanitize-gdbtk
* configure configure.in: Add mswin to configdirs if host is
i[3456]86-*-windows.
* core-aout.c (fetch_core_registers register_addr) gdbcore.h:
Change all vars that can contain addresses to type CORE_ADDR.
* findvar.c (supply_register): Allow val to be NULL. This means
that regno is unsupported.
* (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms
just call pid forms with inferior_pid so that there's only once
place to hack PC's and such.
* infrun.c (proceed): Don't skip breakpoints if user changed PC.
* remote-wiggler.c: New file. Support for BDM interface from
Macraigor Systems.
* serial.c: Enhance serial logging capability. Add hex and octal
output modes (set remotelogbase {hex|octal|ascii}. Also log
breaks, timeouts, errors, and eofs.
* serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper
function so that we can log breaks. Don't export serial_logfile
or serial_logfp.
* top.c (execute_command): Don't test for serial_logfp here.
Just call serial_log_comand, and let serial.c sort it out.
* valops.c (value_of_variable): Don't attempt to establish frames
for static and global variables. This makes things work a bit
better if the stack or frame pointer is trashed.
* config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o.
* config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack
misaligned stacks during function calls.
183 lines
6.5 KiB
C
183 lines
6.5 KiB
C
/* Remote serial support interface definitions for GDB, the GNU Debugger.
|
|
Copyright 1992, 1993 Free Software Foundation, Inc.
|
|
|
|
This file is part of GDB.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
|
|
|
|
#ifndef SERIAL_H
|
|
#define SERIAL_H
|
|
|
|
/* Terminal state pointer. This is specific to each type of interface. */
|
|
|
|
typedef PTR serial_ttystate;
|
|
|
|
struct _serial_t
|
|
{
|
|
int fd; /* File descriptor */
|
|
struct serial_ops *ops; /* Function vector */
|
|
serial_ttystate ttystate; /* Not used (yet) */
|
|
int bufcnt; /* Amount of data in receive buffer */
|
|
unsigned char *bufp; /* Current byte */
|
|
unsigned char buf[BUFSIZ]; /* Da buffer itself */
|
|
int current_timeout; /* (termio{s} only), last value of VTIME */
|
|
/* ser-unix.c termio{,s} only, we still need to wait for this many more
|
|
seconds. */
|
|
int timeout_remaining;
|
|
char *name; /* The name of the device or host */
|
|
struct _serial_t *next; /* Pointer to the next serial_t */
|
|
int refcnt; /* Number of pointers to this block */
|
|
};
|
|
|
|
typedef struct _serial_t *serial_t;
|
|
|
|
struct serial_ops {
|
|
char *name;
|
|
struct serial_ops *next;
|
|
int (*open) PARAMS ((serial_t, const char *name));
|
|
void (*close) PARAMS ((serial_t));
|
|
int (*readchar) PARAMS ((serial_t, int timeout));
|
|
int (*write) PARAMS ((serial_t, const char *str, int len));
|
|
int (*flush_output) PARAMS ((serial_t));
|
|
int (*flush_input) PARAMS ((serial_t));
|
|
int (*send_break) PARAMS ((serial_t));
|
|
void (*go_raw) PARAMS ((serial_t));
|
|
serial_ttystate (*get_tty_state) PARAMS ((serial_t));
|
|
int (*set_tty_state) PARAMS ((serial_t, serial_ttystate));
|
|
void (*print_tty_state) PARAMS ((serial_t, serial_ttystate));
|
|
int (*noflush_set_tty_state)
|
|
PARAMS ((serial_t, serial_ttystate, serial_ttystate));
|
|
int (*setbaudrate) PARAMS ((serial_t, int rate));
|
|
int (*setstopbits) PARAMS ((serial_t, int num));
|
|
};
|
|
|
|
/* Add a new serial interface to the interface list */
|
|
|
|
void serial_add_interface PARAMS ((struct serial_ops *optable));
|
|
|
|
serial_t serial_open PARAMS ((const char *name));
|
|
|
|
serial_t serial_fdopen PARAMS ((const int fd));
|
|
|
|
/* For most routines, if a failure is indicated, then errno should be
|
|
examined. */
|
|
|
|
/* Try to open NAME. Returns a new serial_t on success, NULL on failure.
|
|
*/
|
|
|
|
#define SERIAL_OPEN(NAME) serial_open(NAME)
|
|
|
|
/* Open a new serial stream using a file handle. */
|
|
|
|
#define SERIAL_FDOPEN(FD) serial_fdopen(FD)
|
|
|
|
/* Flush pending output. Might also flush input (if this system can't flush
|
|
only output). */
|
|
|
|
#define SERIAL_FLUSH_OUTPUT(SERIAL_T) \
|
|
((SERIAL_T)->ops->flush_output((SERIAL_T)))
|
|
|
|
/* Flush pending input. Might also flush output (if this system can't flush
|
|
only input). */
|
|
|
|
#define SERIAL_FLUSH_INPUT(SERIAL_T)\
|
|
((*(SERIAL_T)->ops->flush_input) ((SERIAL_T)))
|
|
|
|
/* Send a break between 0.25 and 0.5 seconds long. */
|
|
|
|
extern int serial_send_break PARAMS ((serial_t scb));
|
|
|
|
#define SERIAL_SEND_BREAK(SERIAL_T) serial_send_break (SERIAL_T)
|
|
|
|
/* Turn the port into raw mode. */
|
|
|
|
#define SERIAL_RAW(SERIAL_T) (SERIAL_T)->ops->go_raw((SERIAL_T))
|
|
|
|
/* Return a pointer to a newly malloc'd ttystate containing the state
|
|
of the tty. */
|
|
#define SERIAL_GET_TTY_STATE(SERIAL_T) (SERIAL_T)->ops->get_tty_state((SERIAL_T))
|
|
|
|
/* Set the state of the tty to TTYSTATE. The change is immediate.
|
|
When changing to or from raw mode, input might be discarded.
|
|
Returns 0 for success, negative value for error (in which case errno
|
|
contains the error). */
|
|
#define SERIAL_SET_TTY_STATE(SERIAL_T, TTYSTATE) (SERIAL_T)->ops->set_tty_state((SERIAL_T), (TTYSTATE))
|
|
|
|
/* printf_filtered a user-comprehensible description of ttystate. */
|
|
#define SERIAL_PRINT_TTY_STATE(SERIAL_T, TTYSTATE) \
|
|
((*((SERIAL_T)->ops->print_tty_state)) ((SERIAL_T), (TTYSTATE)))
|
|
|
|
/* Set the tty state to NEW_TTYSTATE, where OLD_TTYSTATE is the
|
|
current state (generally obtained from a recent call to
|
|
SERIAL_GET_TTY_STATE), but be careful not to discard any input.
|
|
This means that we never switch in or out of raw mode, even
|
|
if NEW_TTYSTATE specifies a switch. */
|
|
#define SERIAL_NOFLUSH_SET_TTY_STATE(SERIAL_T, NEW_TTYSTATE, OLD_TTYSTATE) \
|
|
((*((SERIAL_T)->ops->noflush_set_tty_state)) \
|
|
((SERIAL_T), (NEW_TTYSTATE), (OLD_TTYSTATE)))
|
|
|
|
/* Read one char from the serial device with TIMEOUT seconds to wait
|
|
or -1 to wait forever. Use timeout of 0 to effect a poll. Returns
|
|
char if ok, else one of the following codes. Note that all error
|
|
codes are guaranteed to be < 0. */
|
|
|
|
#define SERIAL_ERROR -1 /* General error, see errno for details */
|
|
#define SERIAL_TIMEOUT -2
|
|
#define SERIAL_EOF -3
|
|
|
|
extern int serial_readchar PARAMS ((serial_t scb, int timeout));
|
|
|
|
#define SERIAL_READCHAR(SERIAL_T, TIMEOUT) serial_readchar (SERIAL_T, TIMEOUT)
|
|
|
|
/* Set the baudrate to the decimal value supplied. Returns 0 for success,
|
|
-1 for failure. */
|
|
|
|
#define SERIAL_SETBAUDRATE(SERIAL_T, RATE) ((SERIAL_T)->ops->setbaudrate((SERIAL_T), RATE))
|
|
|
|
/* Set the number of stop bits to the value specified. Returns 0 for success,
|
|
-1 for failure. */
|
|
|
|
#define SERIAL_1_STOPBITS 1
|
|
#define SERIAL_1_AND_A_HALF_STOPBITS 2 /* 1.5 bits, snicker... */
|
|
#define SERIAL_2_STOPBITS 3
|
|
|
|
#define SERIAL_SETSTOPBITS(SERIAL_T, NUM) ((SERIAL_T)->ops->setstopbits((SERIAL_T), NUM))
|
|
|
|
/* Write LEN chars from STRING to the port SERIAL_T. Returns 0 for
|
|
success, non-zero for failure. */
|
|
|
|
extern int serial_write PARAMS ((serial_t scb, const char *str, int len));
|
|
|
|
#define SERIAL_WRITE(SERIAL_T, STRING,LEN) serial_write (SERIAL_T, STRING, LEN)
|
|
|
|
/* Push out all buffers, close the device and destroy SERIAL_T. */
|
|
|
|
extern void serial_close PARAMS ((serial_t, int));
|
|
|
|
#define SERIAL_CLOSE(SERIAL_T) serial_close(SERIAL_T, 1)
|
|
|
|
/* Push out all buffers and destroy SERIAL_T without closing the device. */
|
|
|
|
#define SERIAL_UN_FDOPEN(SERIAL_T) serial_close(SERIAL_T, 0)
|
|
|
|
extern void serial_printf PARAMS ((serial_t desc, const char *, ...))
|
|
ATTR_FORMAT(printf, 2, 3);
|
|
|
|
/* File in which to record the remote debugging session */
|
|
|
|
extern void serial_log_command PARAMS ((const char *));
|
|
|
|
#endif /* SERIAL_H */
|