mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-21 04:42:53 +08:00
919adfe840
This patch moves gdbserver to the top level. This patch is as close to a pure move as possible -- gdbserver still builds its own variant of gnulib and gdbsupport. Changing this will be done in a separate patch. [v2] Note that, per Simon's review comment, this patch changes the tree so that gdbserver is not built for or1k or score. This makes sense, because there is apparently not actually a gdbserver port here. [v3] This version of the patch also splits out some configury into a new file, gdbserver/configure.host, so that the top-level configure script can simply rely on it in order to decide whether gdbserver should be built. [v4] This version adds documentation and removes some unnecessary top-level dependencies. [v5] Update docs to mention "make all-gdbserver" and change how top-level configure decides whether to build gdbserver, switching to a single, shared script. Tested by the buildbot. ChangeLog 2020-02-07 Tom Tromey <tom@tromey.com> Pedro Alves <palves@redhat.com> * src-release.sh (GDB_SUPPORT_DIRS): Add gdbserver. * gdbserver: New directory, moved from gdb/gdbserver. * configure.ac (host_tools): Add gdbserver. Only build gdbserver on certain systems. * Makefile.in, configure: Rebuild. * Makefile.def (host_modules, dependencies): Add gdbserver. * MAINTAINERS: Add gdbserver. gdb/ChangeLog 2020-02-07 Tom Tromey <tom@tromey.com> * README: Update gdbserver documentation. * gdbserver: Move to top level. * configure.tgt (build_gdbserver): Remove. * configure.ac: Remove --enable-gdbserver. * configure: Rebuild. * Makefile.in (distclean): Don't mention gdbserver. Change-Id: I826b7565b54604711dc7a11edea0499cd51ff39e
203 lines
8.1 KiB
Plaintext
203 lines
8.1 KiB
Plaintext
# generated automatically by aclocal 1.15.1 -*- Autoconf -*-
|
|
|
|
# Copyright (C) 1996-2017 Free Software Foundation, Inc.
|
|
|
|
# This file is free software; the Free Software Foundation
|
|
# gives unlimited permission to copy and/or distribute it,
|
|
# with or without modifications, as long as this notice is preserved.
|
|
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
|
|
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
|
|
# PARTICULAR PURPOSE.
|
|
|
|
m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
|
|
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
|
|
|
|
# Copyright (C) 2001-2017 Free Software Foundation, Inc.
|
|
#
|
|
# This file is free software; the Free Software Foundation
|
|
# gives unlimited permission to copy and/or distribute it,
|
|
# with or without modifications, as long as this notice is preserved.
|
|
|
|
# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
|
|
# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
|
|
# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
|
|
#
|
|
# Of course, Automake must honor this variable whenever it calls a
|
|
# tool from the auxiliary directory. The problem is that $srcdir (and
|
|
# therefore $ac_aux_dir as well) can be either absolute or relative,
|
|
# depending on how configure is run. This is pretty annoying, since
|
|
# it makes $ac_aux_dir quite unusable in subdirectories: in the top
|
|
# source directory, any form will work fine, but in subdirectories a
|
|
# relative path needs to be adjusted first.
|
|
#
|
|
# $ac_aux_dir/missing
|
|
# fails when called from a subdirectory if $ac_aux_dir is relative
|
|
# $top_srcdir/$ac_aux_dir/missing
|
|
# fails if $ac_aux_dir is absolute,
|
|
# fails when called from a subdirectory in a VPATH build with
|
|
# a relative $ac_aux_dir
|
|
#
|
|
# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
|
|
# are both prefixed by $srcdir. In an in-source build this is usually
|
|
# harmless because $srcdir is '.', but things will broke when you
|
|
# start a VPATH build or use an absolute $srcdir.
|
|
#
|
|
# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
|
|
# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
|
|
# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
|
|
# and then we would define $MISSING as
|
|
# MISSING="\${SHELL} $am_aux_dir/missing"
|
|
# This will work as long as MISSING is not called from configure, because
|
|
# unfortunately $(top_srcdir) has no meaning in configure.
|
|
# However there are other variables, like CC, which are often used in
|
|
# configure, and could therefore not use this "fixed" $ac_aux_dir.
|
|
#
|
|
# Another solution, used here, is to always expand $ac_aux_dir to an
|
|
# absolute PATH. The drawback is that using absolute paths prevent a
|
|
# configured tree to be moved without reconfiguration.
|
|
|
|
AC_DEFUN([AM_AUX_DIR_EXPAND],
|
|
[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
|
|
# Expand $ac_aux_dir to an absolute path.
|
|
am_aux_dir=`cd "$ac_aux_dir" && pwd`
|
|
])
|
|
|
|
# AM_CONDITIONAL -*- Autoconf -*-
|
|
|
|
# Copyright (C) 1997-2017 Free Software Foundation, Inc.
|
|
#
|
|
# This file is free software; the Free Software Foundation
|
|
# gives unlimited permission to copy and/or distribute it,
|
|
# with or without modifications, as long as this notice is preserved.
|
|
|
|
# AM_CONDITIONAL(NAME, SHELL-CONDITION)
|
|
# -------------------------------------
|
|
# Define a conditional.
|
|
AC_DEFUN([AM_CONDITIONAL],
|
|
[AC_PREREQ([2.52])dnl
|
|
m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
|
|
[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
|
|
AC_SUBST([$1_TRUE])dnl
|
|
AC_SUBST([$1_FALSE])dnl
|
|
_AM_SUBST_NOTMAKE([$1_TRUE])dnl
|
|
_AM_SUBST_NOTMAKE([$1_FALSE])dnl
|
|
m4_define([_AM_COND_VALUE_$1], [$2])dnl
|
|
if $2; then
|
|
$1_TRUE=
|
|
$1_FALSE='#'
|
|
else
|
|
$1_TRUE='#'
|
|
$1_FALSE=
|
|
fi
|
|
AC_CONFIG_COMMANDS_PRE(
|
|
[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
|
|
AC_MSG_ERROR([[conditional "$1" was never defined.
|
|
Usually this means the macro was only invoked conditionally.]])
|
|
fi])])
|
|
|
|
# Copyright (C) 2001-2017 Free Software Foundation, Inc.
|
|
#
|
|
# This file is free software; the Free Software Foundation
|
|
# gives unlimited permission to copy and/or distribute it,
|
|
# with or without modifications, as long as this notice is preserved.
|
|
|
|
# AM_PROG_INSTALL_SH
|
|
# ------------------
|
|
# Define $install_sh.
|
|
AC_DEFUN([AM_PROG_INSTALL_SH],
|
|
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
|
|
if test x"${install_sh+set}" != xset; then
|
|
case $am_aux_dir in
|
|
*\ * | *\ *)
|
|
install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
|
|
*)
|
|
install_sh="\${SHELL} $am_aux_dir/install-sh"
|
|
esac
|
|
fi
|
|
AC_SUBST([install_sh])])
|
|
|
|
# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
|
|
# From Jim Meyering
|
|
|
|
# Copyright (C) 1996-2017 Free Software Foundation, Inc.
|
|
#
|
|
# This file is free software; the Free Software Foundation
|
|
# gives unlimited permission to copy and/or distribute it,
|
|
# with or without modifications, as long as this notice is preserved.
|
|
|
|
# AM_MAINTAINER_MODE([DEFAULT-MODE])
|
|
# ----------------------------------
|
|
# Control maintainer-specific portions of Makefiles.
|
|
# Default is to disable them, unless 'enable' is passed literally.
|
|
# For symmetry, 'disable' may be passed as well. Anyway, the user
|
|
# can override the default with the --enable/--disable switch.
|
|
AC_DEFUN([AM_MAINTAINER_MODE],
|
|
[m4_case(m4_default([$1], [disable]),
|
|
[enable], [m4_define([am_maintainer_other], [disable])],
|
|
[disable], [m4_define([am_maintainer_other], [enable])],
|
|
[m4_define([am_maintainer_other], [enable])
|
|
m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
|
|
AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
|
|
dnl maintainer-mode's default is 'disable' unless 'enable' is passed
|
|
AC_ARG_ENABLE([maintainer-mode],
|
|
[AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode],
|
|
am_maintainer_other[ make rules and dependencies not useful
|
|
(and sometimes confusing) to the casual installer])],
|
|
[USE_MAINTAINER_MODE=$enableval],
|
|
[USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
|
|
AC_MSG_RESULT([$USE_MAINTAINER_MODE])
|
|
AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
|
|
MAINT=$MAINTAINER_MODE_TRUE
|
|
AC_SUBST([MAINT])dnl
|
|
]
|
|
)
|
|
|
|
# Copyright (C) 2001-2017 Free Software Foundation, Inc.
|
|
#
|
|
# This file is free software; the Free Software Foundation
|
|
# gives unlimited permission to copy and/or distribute it,
|
|
# with or without modifications, as long as this notice is preserved.
|
|
|
|
# AM_PROG_INSTALL_STRIP
|
|
# ---------------------
|
|
# One issue with vendor 'install' (even GNU) is that you can't
|
|
# specify the program used to strip binaries. This is especially
|
|
# annoying in cross-compiling environments, where the build's strip
|
|
# is unlikely to handle the host's binaries.
|
|
# Fortunately install-sh will honor a STRIPPROG variable, so we
|
|
# always use install-sh in "make install-strip", and initialize
|
|
# STRIPPROG with the value of the STRIP variable (set by the user).
|
|
AC_DEFUN([AM_PROG_INSTALL_STRIP],
|
|
[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
|
|
# Installed binaries are usually stripped using 'strip' when the user
|
|
# run "make install-strip". However 'strip' might not be the right
|
|
# tool to use in cross-compilation environments, therefore Automake
|
|
# will honor the 'STRIP' environment variable to overrule this program.
|
|
dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
|
|
if test "$cross_compiling" != no; then
|
|
AC_CHECK_TOOL([STRIP], [strip], :)
|
|
fi
|
|
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
|
|
AC_SUBST([INSTALL_STRIP_PROGRAM])])
|
|
|
|
# Copyright (C) 2006-2017 Free Software Foundation, Inc.
|
|
#
|
|
# This file is free software; the Free Software Foundation
|
|
# gives unlimited permission to copy and/or distribute it,
|
|
# with or without modifications, as long as this notice is preserved.
|
|
|
|
# _AM_SUBST_NOTMAKE(VARIABLE)
|
|
# ---------------------------
|
|
# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
|
|
# This macro is traced by Automake.
|
|
AC_DEFUN([_AM_SUBST_NOTMAKE])
|
|
|
|
# AM_SUBST_NOTMAKE(VARIABLE)
|
|
# --------------------------
|
|
# Public sister of _AM_SUBST_NOTMAKE.
|
|
AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
|
|
|
|
m4_include([acinclude.m4])
|