mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-15 04:31:49 +08:00
c1e1314d00
While working on something else, I noticed that tdesc_data_cleanup took a void* parameter. Looking more into this, I found that tdesc_use_registers expected a transfer of ownership. I think it's better to express this sort of thing via the type system, when possible. This patch changes tdesc_data_alloc to return a unique pointer, changes tdesc_use_registers to accept an rvalue reference, and then adapts all the users. Note that a deleter structure is introduced to avoid having to move tdesc_arch_data to the header file. 2020-09-17 Tom Tromey <tromey@adacore.com> * tic6x-tdep.c (tic6x_gdbarch_init): Update. * target-descriptions.h (struct tdesc_arch_data_deleter): New. (tdesc_arch_data_up): New typedef. (tdesc_use_registers, tdesc_data_alloc): Update. (tdesc_data_cleanup): Don't declare. * target-descriptions.c (tdesc_data_alloc): Return a tdesc_arch_data_up. (tdesc_arch_data_deleter::operator()): Rename from tdesc_data_cleanup. Change argument type. (tdesc_use_registers): Change early_data to an rvalue reference. (tdesc_use_registers): Don't use delete. * sparc-tdep.c (sparc32_gdbarch_init): Update. * s390-tdep.c (s390_gdbarch_init): Update. * rx-tdep.c (rx_gdbarch_init): Update. * rs6000-tdep.c (rs6000_gdbarch_init): Update. * riscv-tdep.c (riscv_gdbarch_init): Update. * or1k-tdep.c (or1k_gdbarch_init): Update. * nios2-tdep.c (nios2_gdbarch_init): Update. * nds32-tdep.c (nds32_gdbarch_init): Update. * mips-tdep.c (mips_gdbarch_init): Update. * microblaze-tdep.c (microblaze_gdbarch_init): Update. * m68k-tdep.c (m68k_gdbarch_init): Update. * i386-tdep.c (i386_gdbarch_init): Update. * arm-tdep.c (arm_gdbarch_init): Update. * arc-tdep.c (arc_tdesc_init): Update. (arc_gdbarch_init): Update. * aarch64-tdep.c (aarch64_gdbarch_init): Update.
3779 lines
124 KiB
C
3779 lines
124 KiB
C
/* Target-dependent code for the RISC-V architecture, for GDB.
|
|
|
|
Copyright (C) 2018-2020 Free Software Foundation, Inc.
|
|
|
|
This file is part of GDB.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
#include "defs.h"
|
|
#include "frame.h"
|
|
#include "inferior.h"
|
|
#include "symtab.h"
|
|
#include "value.h"
|
|
#include "gdbcmd.h"
|
|
#include "language.h"
|
|
#include "gdbcore.h"
|
|
#include "symfile.h"
|
|
#include "objfiles.h"
|
|
#include "gdbtypes.h"
|
|
#include "target.h"
|
|
#include "arch-utils.h"
|
|
#include "regcache.h"
|
|
#include "osabi.h"
|
|
#include "riscv-tdep.h"
|
|
#include "block.h"
|
|
#include "reggroups.h"
|
|
#include "opcode/riscv.h"
|
|
#include "elf/riscv.h"
|
|
#include "elf-bfd.h"
|
|
#include "symcat.h"
|
|
#include "dis-asm.h"
|
|
#include "frame-unwind.h"
|
|
#include "frame-base.h"
|
|
#include "trad-frame.h"
|
|
#include "infcall.h"
|
|
#include "floatformat.h"
|
|
#include "remote.h"
|
|
#include "target-descriptions.h"
|
|
#include "dwarf2/frame.h"
|
|
#include "user-regs.h"
|
|
#include "valprint.h"
|
|
#include "gdbsupport/common-defs.h"
|
|
#include "opcode/riscv-opc.h"
|
|
#include "cli/cli-decode.h"
|
|
#include "observable.h"
|
|
#include "prologue-value.h"
|
|
#include "arch/riscv.h"
|
|
#include "riscv-ravenscar-thread.h"
|
|
|
|
/* The stack must be 16-byte aligned. */
|
|
#define SP_ALIGNMENT 16
|
|
|
|
/* The biggest alignment that the target supports. */
|
|
#define BIGGEST_ALIGNMENT 16
|
|
|
|
/* Define a series of is_XXX_insn functions to check if the value INSN
|
|
is an instance of instruction XXX. */
|
|
#define DECLARE_INSN(INSN_NAME, INSN_MATCH, INSN_MASK) \
|
|
static inline bool is_ ## INSN_NAME ## _insn (long insn) \
|
|
{ \
|
|
return (insn & INSN_MASK) == INSN_MATCH; \
|
|
}
|
|
#include "opcode/riscv-opc.h"
|
|
#undef DECLARE_INSN
|
|
|
|
/* Cached information about a frame. */
|
|
|
|
struct riscv_unwind_cache
|
|
{
|
|
/* The register from which we can calculate the frame base. This is
|
|
usually $sp or $fp. */
|
|
int frame_base_reg;
|
|
|
|
/* The offset from the current value in register FRAME_BASE_REG to the
|
|
actual frame base address. */
|
|
int frame_base_offset;
|
|
|
|
/* Information about previous register values. */
|
|
struct trad_frame_saved_reg *regs;
|
|
|
|
/* The id for this frame. */
|
|
struct frame_id this_id;
|
|
|
|
/* The base (stack) address for this frame. This is the stack pointer
|
|
value on entry to this frame before any adjustments are made. */
|
|
CORE_ADDR frame_base;
|
|
};
|
|
|
|
/* RISC-V specific register group for CSRs. */
|
|
|
|
static reggroup *csr_reggroup = NULL;
|
|
|
|
/* Callback function for user_reg_add. */
|
|
|
|
static struct value *
|
|
value_of_riscv_user_reg (struct frame_info *frame, const void *baton)
|
|
{
|
|
const int *reg_p = (const int *) baton;
|
|
return value_of_register (*reg_p, frame);
|
|
}
|
|
|
|
/* Information about a register alias that needs to be set up for this
|
|
target. These are collected when the target's XML description is
|
|
analysed, and then processed later, once the gdbarch has been created. */
|
|
|
|
class riscv_pending_register_alias
|
|
{
|
|
public:
|
|
/* Constructor. */
|
|
|
|
riscv_pending_register_alias (const char *name, const void *baton)
|
|
: m_name (name),
|
|
m_baton (baton)
|
|
{ /* Nothing. */ }
|
|
|
|
/* Convert this into a user register for GDBARCH. */
|
|
|
|
void create (struct gdbarch *gdbarch) const
|
|
{
|
|
user_reg_add (gdbarch, m_name, value_of_riscv_user_reg, m_baton);
|
|
}
|
|
|
|
private:
|
|
/* The name for this alias. */
|
|
const char *m_name;
|
|
|
|
/* The baton value for passing to user_reg_add. This must point to some
|
|
data that will live for at least as long as the gdbarch object to
|
|
which the user register is attached. */
|
|
const void *m_baton;
|
|
};
|
|
|
|
/* Registers in the RISCV_REGISTER_FEATURE lists below are either optional,
|
|
or required. For example the $pc register is always going to be a
|
|
required register, you can't do much debugging without that. In
|
|
contrast, most of the CSRs are optional, GDB doesn't require them in
|
|
order to have a useful debug session. This enum models the difference
|
|
between these register types. */
|
|
|
|
enum riscv_register_required_status
|
|
{
|
|
/* This register is optional within this feature. */
|
|
RISCV_REG_OPTIONAL,
|
|
|
|
/* This register is required within this feature. */
|
|
RISCV_REG_REQUIRED,
|
|
|
|
/* This register is required, the register must either be in this
|
|
feature, or it could appear within the CSR feature. */
|
|
RISCV_REG_REQUIRED_MAYBE_CSR
|
|
};
|
|
|
|
/* A set of registers that we expect to find in a tdesc_feature. These
|
|
are use in RISCV_GDBARCH_INIT when processing the target description. */
|
|
|
|
struct riscv_register_feature
|
|
{
|
|
/* Information for a single register. */
|
|
struct register_info
|
|
{
|
|
/* The GDB register number for this register. */
|
|
int regnum;
|
|
|
|
/* List of names for this register. The first name in this list is the
|
|
preferred name, the name GDB should use when describing this
|
|
register. */
|
|
std::vector<const char *> names;
|
|
|
|
/* Is this register required within this feature? In some cases the
|
|
register could be required, but might also be in the CSR feature. */
|
|
riscv_register_required_status required;
|
|
|
|
/* Look in FEATURE for a register with a name from this classes names
|
|
list. If the register is found then register its number with
|
|
TDESC_DATA and add all its aliases to the ALIASES list. REG_SET is
|
|
used to help create the aliases. */
|
|
bool check (struct tdesc_arch_data *tdesc_data,
|
|
const struct tdesc_feature *feature,
|
|
const struct riscv_register_feature *reg_set,
|
|
std::vector<riscv_pending_register_alias> *aliases) const;
|
|
};
|
|
|
|
/* The name for this feature. This is the name used to find this feature
|
|
within the target description. */
|
|
const char *name;
|
|
|
|
/* For x-regs and f-regs we always force GDB to use the first name from
|
|
the REGISTERS.NAMES vector, it is therefore important that we create
|
|
user-register aliases for all of the remaining names at indexes 1+ in
|
|
the names vector.
|
|
|
|
For CSRs we take a different approach, we prefer whatever name the
|
|
target description uses, in this case we want to create user-register
|
|
aliases for any other names that aren't the target description
|
|
provided name.
|
|
|
|
When this flag is true we are dealing with the first case, and when
|
|
this is false we are dealing with the latter. */
|
|
bool prefer_first_name;
|
|
|
|
/* List of all the registers that we expect that we might find in this
|
|
register set. */
|
|
std::vector<struct register_info> registers;
|
|
};
|
|
|
|
/* See description in the class declaration above. */
|
|
|
|
bool
|
|
riscv_register_feature::register_info::check
|
|
(struct tdesc_arch_data *tdesc_data,
|
|
const struct tdesc_feature *feature,
|
|
const struct riscv_register_feature *reg_set,
|
|
std::vector<riscv_pending_register_alias> *aliases) const
|
|
{
|
|
for (const char *name : this->names)
|
|
{
|
|
bool found = tdesc_numbered_register (feature, tdesc_data,
|
|
this->regnum, name);
|
|
if (found)
|
|
{
|
|
/* We know that the target description mentions this
|
|
register. In RISCV_REGISTER_NAME we ensure that GDB
|
|
always uses the first name for each register, so here we
|
|
add aliases for all of the remaining names. */
|
|
bool prefer_first_name = reg_set->prefer_first_name;
|
|
int start_index = prefer_first_name ? 1 : 0;
|
|
for (int i = start_index; i < this->names.size (); ++i)
|
|
{
|
|
const char *alias = this->names[i];
|
|
if (alias == name && !prefer_first_name)
|
|
continue;
|
|
aliases->emplace_back (alias, (void *) &this->regnum);
|
|
}
|
|
return true;
|
|
}
|
|
}
|
|
return false;
|
|
}
|
|
|
|
/* The general x-registers feature set. */
|
|
|
|
static const struct riscv_register_feature riscv_xreg_feature =
|
|
{
|
|
"org.gnu.gdb.riscv.cpu", true,
|
|
{
|
|
{ RISCV_ZERO_REGNUM + 0, { "zero", "x0" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 1, { "ra", "x1" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 2, { "sp", "x2" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 3, { "gp", "x3" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 4, { "tp", "x4" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 5, { "t0", "x5" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 6, { "t1", "x6" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 7, { "t2", "x7" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 8, { "fp", "x8", "s0" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 9, { "s1", "x9" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 10, { "a0", "x10" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 11, { "a1", "x11" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 12, { "a2", "x12" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 13, { "a3", "x13" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 14, { "a4", "x14" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 15, { "a5", "x15" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 16, { "a6", "x16" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 17, { "a7", "x17" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 18, { "s2", "x18" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 19, { "s3", "x19" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 20, { "s4", "x20" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 21, { "s5", "x21" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 22, { "s6", "x22" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 23, { "s7", "x23" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 24, { "s8", "x24" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 25, { "s9", "x25" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 26, { "s10", "x26" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 27, { "s11", "x27" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 28, { "t3", "x28" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 29, { "t4", "x29" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 30, { "t5", "x30" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 31, { "t6", "x31" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_ZERO_REGNUM + 32, { "pc" }, RISCV_REG_REQUIRED }
|
|
}
|
|
};
|
|
|
|
/* The f-registers feature set. */
|
|
|
|
static const struct riscv_register_feature riscv_freg_feature =
|
|
{
|
|
"org.gnu.gdb.riscv.fpu", true,
|
|
{
|
|
{ RISCV_FIRST_FP_REGNUM + 0, { "ft0", "f0" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 1, { "ft1", "f1" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 2, { "ft2", "f2" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 3, { "ft3", "f3" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 4, { "ft4", "f4" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 5, { "ft5", "f5" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 6, { "ft6", "f6" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 7, { "ft7", "f7" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 8, { "fs0", "f8" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 9, { "fs1", "f9" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 10, { "fa0", "f10" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 11, { "fa1", "f11" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 12, { "fa2", "f12" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 13, { "fa3", "f13" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 14, { "fa4", "f14" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 15, { "fa5", "f15" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 16, { "fa6", "f16" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 17, { "fa7", "f17" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 18, { "fs2", "f18" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 19, { "fs3", "f19" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 20, { "fs4", "f20" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 21, { "fs5", "f21" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 22, { "fs6", "f22" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 23, { "fs7", "f23" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 24, { "fs8", "f24" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 25, { "fs9", "f25" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 26, { "fs10", "f26" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 27, { "fs11", "f27" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 28, { "ft8", "f28" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 29, { "ft9", "f29" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 30, { "ft10", "f30" }, RISCV_REG_REQUIRED },
|
|
{ RISCV_FIRST_FP_REGNUM + 31, { "ft11", "f31" }, RISCV_REG_REQUIRED },
|
|
|
|
{ RISCV_CSR_FFLAGS_REGNUM, { "fflags", "csr1" }, RISCV_REG_REQUIRED_MAYBE_CSR },
|
|
{ RISCV_CSR_FRM_REGNUM, { "frm", "csr2" }, RISCV_REG_REQUIRED_MAYBE_CSR },
|
|
{ RISCV_CSR_FCSR_REGNUM, { "fcsr", "csr3" }, RISCV_REG_REQUIRED_MAYBE_CSR },
|
|
|
|
}
|
|
};
|
|
|
|
/* Set of virtual registers. These are not physical registers on the
|
|
hardware, but might be available from the target. These are not pseudo
|
|
registers, reading these really does result in a register read from the
|
|
target, it is just that there might not be a physical register backing
|
|
the result. */
|
|
|
|
static const struct riscv_register_feature riscv_virtual_feature =
|
|
{
|
|
"org.gnu.gdb.riscv.virtual", false,
|
|
{
|
|
{ RISCV_PRIV_REGNUM, { "priv" }, RISCV_REG_OPTIONAL }
|
|
}
|
|
};
|
|
|
|
/* Feature set for CSRs. This set is NOT constant as the register names
|
|
list for each register is not complete. The aliases are computed
|
|
during RISCV_CREATE_CSR_ALIASES. */
|
|
|
|
static struct riscv_register_feature riscv_csr_feature =
|
|
{
|
|
"org.gnu.gdb.riscv.csr", false,
|
|
{
|
|
#define DECLARE_CSR(NAME,VALUE,CLASS,DEFINE_VER,ABORT_VER) \
|
|
{ RISCV_ ## VALUE ## _REGNUM, { # NAME }, RISCV_REG_OPTIONAL },
|
|
#include "opcode/riscv-opc.h"
|
|
#undef DECLARE_CSR
|
|
}
|
|
};
|
|
|
|
/* Complete RISCV_CSR_FEATURE, building the CSR alias names and adding them
|
|
to the name list for each register. */
|
|
|
|
static void
|
|
riscv_create_csr_aliases ()
|
|
{
|
|
for (auto ® : riscv_csr_feature.registers)
|
|
{
|
|
int csr_num = reg.regnum - RISCV_FIRST_CSR_REGNUM;
|
|
const char *alias = xstrprintf ("csr%d", csr_num);
|
|
reg.names.push_back (alias);
|
|
|
|
/* Setup the other csr aliases. We don't use a switch table here in
|
|
case there are multiple aliases with the same value. Also filter
|
|
based on ABRT_VER in order to avoid a very old alias for misa that
|
|
duplicates the name "misa" but at a different CSR address. */
|
|
#define DECLARE_CSR_ALIAS(NAME,VALUE,CLASS,DEF_VER,ABRT_VER) \
|
|
if (csr_num == VALUE && ABRT_VER >= PRIV_SPEC_CLASS_1P11) \
|
|
reg.names.push_back ( # NAME );
|
|
#include "opcode/riscv-opc.h"
|
|
#undef DECLARE_CSR_ALIAS
|
|
}
|
|
}
|
|
|
|
/* Controls whether we place compressed breakpoints or not. When in auto
|
|
mode GDB tries to determine if the target supports compressed
|
|
breakpoints, and uses them if it does. */
|
|
|
|
static enum auto_boolean use_compressed_breakpoints;
|
|
|
|
/* The show callback for 'show riscv use-compressed-breakpoints'. */
|
|
|
|
static void
|
|
show_use_compressed_breakpoints (struct ui_file *file, int from_tty,
|
|
struct cmd_list_element *c,
|
|
const char *value)
|
|
{
|
|
fprintf_filtered (file,
|
|
_("Debugger's use of compressed breakpoints is set "
|
|
"to %s.\n"), value);
|
|
}
|
|
|
|
/* The set and show lists for 'set riscv' and 'show riscv' prefixes. */
|
|
|
|
static struct cmd_list_element *setriscvcmdlist = NULL;
|
|
static struct cmd_list_element *showriscvcmdlist = NULL;
|
|
|
|
/* The set and show lists for 'set riscv' and 'show riscv' prefixes. */
|
|
|
|
static struct cmd_list_element *setdebugriscvcmdlist = NULL;
|
|
static struct cmd_list_element *showdebugriscvcmdlist = NULL;
|
|
|
|
/* The show callback for all 'show debug riscv VARNAME' variables. */
|
|
|
|
static void
|
|
show_riscv_debug_variable (struct ui_file *file, int from_tty,
|
|
struct cmd_list_element *c,
|
|
const char *value)
|
|
{
|
|
fprintf_filtered (file,
|
|
_("RiscV debug variable `%s' is set to: %s\n"),
|
|
c->name, value);
|
|
}
|
|
|
|
/* When this is set to non-zero debugging information about breakpoint
|
|
kinds will be printed. */
|
|
|
|
static unsigned int riscv_debug_breakpoints = 0;
|
|
|
|
/* When this is set to non-zero debugging information about inferior calls
|
|
will be printed. */
|
|
|
|
static unsigned int riscv_debug_infcall = 0;
|
|
|
|
/* When this is set to non-zero debugging information about stack unwinding
|
|
will be printed. */
|
|
|
|
static unsigned int riscv_debug_unwinder = 0;
|
|
|
|
/* When this is set to non-zero debugging information about gdbarch
|
|
initialisation will be printed. */
|
|
|
|
static unsigned int riscv_debug_gdbarch = 0;
|
|
|
|
/* See riscv-tdep.h. */
|
|
|
|
int
|
|
riscv_isa_xlen (struct gdbarch *gdbarch)
|
|
{
|
|
return gdbarch_tdep (gdbarch)->isa_features.xlen;
|
|
}
|
|
|
|
/* See riscv-tdep.h. */
|
|
|
|
int
|
|
riscv_abi_xlen (struct gdbarch *gdbarch)
|
|
{
|
|
return gdbarch_tdep (gdbarch)->abi_features.xlen;
|
|
}
|
|
|
|
/* See riscv-tdep.h. */
|
|
|
|
int
|
|
riscv_isa_flen (struct gdbarch *gdbarch)
|
|
{
|
|
return gdbarch_tdep (gdbarch)->isa_features.flen;
|
|
}
|
|
|
|
/* See riscv-tdep.h. */
|
|
|
|
int
|
|
riscv_abi_flen (struct gdbarch *gdbarch)
|
|
{
|
|
return gdbarch_tdep (gdbarch)->abi_features.flen;
|
|
}
|
|
|
|
/* Return true if the target for GDBARCH has floating point hardware. */
|
|
|
|
static bool
|
|
riscv_has_fp_regs (struct gdbarch *gdbarch)
|
|
{
|
|
return (riscv_isa_flen (gdbarch) > 0);
|
|
}
|
|
|
|
/* Return true if GDBARCH is using any of the floating point hardware ABIs. */
|
|
|
|
static bool
|
|
riscv_has_fp_abi (struct gdbarch *gdbarch)
|
|
{
|
|
return gdbarch_tdep (gdbarch)->abi_features.flen > 0;
|
|
}
|
|
|
|
/* Return true if REGNO is a floating pointer register. */
|
|
|
|
static bool
|
|
riscv_is_fp_regno_p (int regno)
|
|
{
|
|
return (regno >= RISCV_FIRST_FP_REGNUM
|
|
&& regno <= RISCV_LAST_FP_REGNUM);
|
|
}
|
|
|
|
/* Implement the breakpoint_kind_from_pc gdbarch method. */
|
|
|
|
static int
|
|
riscv_breakpoint_kind_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr)
|
|
{
|
|
if (use_compressed_breakpoints == AUTO_BOOLEAN_AUTO)
|
|
{
|
|
bool unaligned_p = false;
|
|
gdb_byte buf[1];
|
|
|
|
/* Some targets don't support unaligned reads. The address can only
|
|
be unaligned if the C extension is supported. So it is safe to
|
|
use a compressed breakpoint in this case. */
|
|
if (*pcptr & 0x2)
|
|
unaligned_p = true;
|
|
else
|
|
{
|
|
/* Read the opcode byte to determine the instruction length. If
|
|
the read fails this may be because we tried to set the
|
|
breakpoint at an invalid address, in this case we provide a
|
|
fake result which will give a breakpoint length of 4.
|
|
Hopefully when we try to actually insert the breakpoint we
|
|
will see a failure then too which will be reported to the
|
|
user. */
|
|
if (target_read_code (*pcptr, buf, 1) == -1)
|
|
buf[0] = 0;
|
|
read_code (*pcptr, buf, 1);
|
|
}
|
|
|
|
if (riscv_debug_breakpoints)
|
|
{
|
|
const char *bp = (unaligned_p || riscv_insn_length (buf[0]) == 2
|
|
? "C.EBREAK" : "EBREAK");
|
|
|
|
fprintf_unfiltered (gdb_stdlog, "Using %s for breakpoint at %s ",
|
|
bp, paddress (gdbarch, *pcptr));
|
|
if (unaligned_p)
|
|
fprintf_unfiltered (gdb_stdlog, "(unaligned address)\n");
|
|
else
|
|
fprintf_unfiltered (gdb_stdlog, "(instruction length %d)\n",
|
|
riscv_insn_length (buf[0]));
|
|
}
|
|
if (unaligned_p || riscv_insn_length (buf[0]) == 2)
|
|
return 2;
|
|
else
|
|
return 4;
|
|
}
|
|
else if (use_compressed_breakpoints == AUTO_BOOLEAN_TRUE)
|
|
return 2;
|
|
else
|
|
return 4;
|
|
}
|
|
|
|
/* Implement the sw_breakpoint_from_kind gdbarch method. */
|
|
|
|
static const gdb_byte *
|
|
riscv_sw_breakpoint_from_kind (struct gdbarch *gdbarch, int kind, int *size)
|
|
{
|
|
static const gdb_byte ebreak[] = { 0x73, 0x00, 0x10, 0x00, };
|
|
static const gdb_byte c_ebreak[] = { 0x02, 0x90 };
|
|
|
|
*size = kind;
|
|
switch (kind)
|
|
{
|
|
case 2:
|
|
return c_ebreak;
|
|
case 4:
|
|
return ebreak;
|
|
default:
|
|
gdb_assert_not_reached (_("unhandled breakpoint kind"));
|
|
}
|
|
}
|
|
|
|
/* Implement the register_name gdbarch method. This is used instead of
|
|
the function supplied by calling TDESC_USE_REGISTERS so that we can
|
|
ensure the preferred names are offered for x-regs and f-regs. */
|
|
|
|
static const char *
|
|
riscv_register_name (struct gdbarch *gdbarch, int regnum)
|
|
{
|
|
/* Lookup the name through the target description. If we get back NULL
|
|
then this is an unknown register. If we do get a name back then we
|
|
look up the registers preferred name below. */
|
|
const char *name = tdesc_register_name (gdbarch, regnum);
|
|
if (name == NULL || name[0] == '\0')
|
|
return NULL;
|
|
|
|
/* We want GDB to use the ABI names for registers even if the target
|
|
gives us a target description with the architectural name. For
|
|
example we want to see 'ra' instead of 'x1' whatever the target
|
|
description called it. */
|
|
if (regnum >= RISCV_ZERO_REGNUM && regnum < RISCV_FIRST_FP_REGNUM)
|
|
{
|
|
gdb_assert (regnum < riscv_xreg_feature.registers.size ());
|
|
return riscv_xreg_feature.registers[regnum].names[0];
|
|
}
|
|
|
|
/* Like with the x-regs we prefer the abi names for the floating point
|
|
registers. */
|
|
if (regnum >= RISCV_FIRST_FP_REGNUM && regnum <= RISCV_LAST_FP_REGNUM)
|
|
{
|
|
if (riscv_has_fp_regs (gdbarch))
|
|
{
|
|
regnum -= RISCV_FIRST_FP_REGNUM;
|
|
gdb_assert (regnum < riscv_freg_feature.registers.size ());
|
|
return riscv_freg_feature.registers[regnum].names[0];
|
|
}
|
|
else
|
|
return NULL;
|
|
}
|
|
|
|
/* Some targets (QEMU) are reporting these three registers twice, once
|
|
in the FPU feature, and once in the CSR feature. Both of these read
|
|
the same underlying state inside the target, but naming the register
|
|
twice in the target description results in GDB having two registers
|
|
with the same name, only one of which can ever be accessed, but both
|
|
will show up in 'info register all'. Unless, we identify the
|
|
duplicate copies of these registers (in riscv_tdesc_unknown_reg) and
|
|
then hide the registers here by giving them no name. */
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
if (tdep->duplicate_fflags_regnum == regnum)
|
|
return NULL;
|
|
if (tdep->duplicate_frm_regnum == regnum)
|
|
return NULL;
|
|
if (tdep->duplicate_fcsr_regnum == regnum)
|
|
return NULL;
|
|
|
|
/* The remaining registers are different. For all other registers on the
|
|
machine we prefer to see the names that the target description
|
|
provides. This is particularly important for CSRs which might be
|
|
renamed over time. If GDB keeps track of the "latest" name, but a
|
|
particular target provides an older name then we don't want to force
|
|
users to see the newer name in register output.
|
|
|
|
The other case that reaches here are any registers that the target
|
|
provided that GDB is completely unaware of. For these we have no
|
|
choice but to accept the target description name.
|
|
|
|
Just accept whatever name TDESC_REGISTER_NAME returned. */
|
|
return name;
|
|
}
|
|
|
|
/* Construct a type for 64-bit FP registers. */
|
|
|
|
static struct type *
|
|
riscv_fpreg_d_type (struct gdbarch *gdbarch)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
|
|
if (tdep->riscv_fpreg_d_type == nullptr)
|
|
{
|
|
const struct builtin_type *bt = builtin_type (gdbarch);
|
|
|
|
/* The type we're building is this: */
|
|
#if 0
|
|
union __gdb_builtin_type_fpreg_d
|
|
{
|
|
float f;
|
|
double d;
|
|
};
|
|
#endif
|
|
|
|
struct type *t;
|
|
|
|
t = arch_composite_type (gdbarch,
|
|
"__gdb_builtin_type_fpreg_d", TYPE_CODE_UNION);
|
|
append_composite_type_field (t, "float", bt->builtin_float);
|
|
append_composite_type_field (t, "double", bt->builtin_double);
|
|
t->set_is_vector (true);
|
|
t->set_name ("builtin_type_fpreg_d");
|
|
tdep->riscv_fpreg_d_type = t;
|
|
}
|
|
|
|
return tdep->riscv_fpreg_d_type;
|
|
}
|
|
|
|
/* Implement the register_type gdbarch method. This is installed as an
|
|
for the override setup by TDESC_USE_REGISTERS, for most registers we
|
|
delegate the type choice to the target description, but for a few
|
|
registers we try to improve the types if the target description has
|
|
taken a simplistic approach. */
|
|
|
|
static struct type *
|
|
riscv_register_type (struct gdbarch *gdbarch, int regnum)
|
|
{
|
|
struct type *type = tdesc_register_type (gdbarch, regnum);
|
|
int xlen = riscv_isa_xlen (gdbarch);
|
|
|
|
/* We want to perform some specific type "fixes" in cases where we feel
|
|
that we really can do better than the target description. For all
|
|
other cases we just return what the target description says. */
|
|
if (riscv_is_fp_regno_p (regnum))
|
|
{
|
|
/* This spots the case for RV64 where the double is defined as
|
|
either 'ieee_double' or 'float' (which is the generic name that
|
|
converts to 'double' on 64-bit). In these cases its better to
|
|
present the registers using a union type. */
|
|
int flen = riscv_isa_flen (gdbarch);
|
|
if (flen == 8
|
|
&& type->code () == TYPE_CODE_FLT
|
|
&& TYPE_LENGTH (type) == flen
|
|
&& (strcmp (type->name (), "builtin_type_ieee_double") == 0
|
|
|| strcmp (type->name (), "double") == 0))
|
|
type = riscv_fpreg_d_type (gdbarch);
|
|
}
|
|
|
|
if ((regnum == gdbarch_pc_regnum (gdbarch)
|
|
|| regnum == RISCV_RA_REGNUM
|
|
|| regnum == RISCV_FP_REGNUM
|
|
|| regnum == RISCV_SP_REGNUM
|
|
|| regnum == RISCV_GP_REGNUM
|
|
|| regnum == RISCV_TP_REGNUM)
|
|
&& type->code () == TYPE_CODE_INT
|
|
&& TYPE_LENGTH (type) == xlen)
|
|
{
|
|
/* This spots the case where some interesting registers are defined
|
|
as simple integers of the expected size, we force these registers
|
|
to be pointers as we believe that is more useful. */
|
|
if (regnum == gdbarch_pc_regnum (gdbarch)
|
|
|| regnum == RISCV_RA_REGNUM)
|
|
type = builtin_type (gdbarch)->builtin_func_ptr;
|
|
else if (regnum == RISCV_FP_REGNUM
|
|
|| regnum == RISCV_SP_REGNUM
|
|
|| regnum == RISCV_GP_REGNUM
|
|
|| regnum == RISCV_TP_REGNUM)
|
|
type = builtin_type (gdbarch)->builtin_data_ptr;
|
|
}
|
|
|
|
return type;
|
|
}
|
|
|
|
/* Helper for riscv_print_registers_info, prints info for a single register
|
|
REGNUM. */
|
|
|
|
static void
|
|
riscv_print_one_register_info (struct gdbarch *gdbarch,
|
|
struct ui_file *file,
|
|
struct frame_info *frame,
|
|
int regnum)
|
|
{
|
|
const char *name = gdbarch_register_name (gdbarch, regnum);
|
|
struct value *val;
|
|
struct type *regtype;
|
|
int print_raw_format;
|
|
enum tab_stops { value_column_1 = 15 };
|
|
|
|
fputs_filtered (name, file);
|
|
print_spaces_filtered (value_column_1 - strlen (name), file);
|
|
|
|
try
|
|
{
|
|
val = value_of_register (regnum, frame);
|
|
regtype = value_type (val);
|
|
}
|
|
catch (const gdb_exception_error &ex)
|
|
{
|
|
/* Handle failure to read a register without interrupting the entire
|
|
'info registers' flow. */
|
|
fprintf_filtered (file, "%s\n", ex.what ());
|
|
return;
|
|
}
|
|
|
|
print_raw_format = (value_entirely_available (val)
|
|
&& !value_optimized_out (val));
|
|
|
|
if (regtype->code () == TYPE_CODE_FLT
|
|
|| (regtype->code () == TYPE_CODE_UNION
|
|
&& regtype->num_fields () == 2
|
|
&& regtype->field (0).type ()->code () == TYPE_CODE_FLT
|
|
&& regtype->field (1).type ()->code () == TYPE_CODE_FLT)
|
|
|| (regtype->code () == TYPE_CODE_UNION
|
|
&& regtype->num_fields () == 3
|
|
&& regtype->field (0).type ()->code () == TYPE_CODE_FLT
|
|
&& regtype->field (1).type ()->code () == TYPE_CODE_FLT
|
|
&& regtype->field (2).type ()->code () == TYPE_CODE_FLT))
|
|
{
|
|
struct value_print_options opts;
|
|
const gdb_byte *valaddr = value_contents_for_printing (val);
|
|
enum bfd_endian byte_order = type_byte_order (regtype);
|
|
|
|
get_user_print_options (&opts);
|
|
opts.deref_ref = 1;
|
|
|
|
common_val_print (val, file, 0, &opts, current_language);
|
|
|
|
if (print_raw_format)
|
|
{
|
|
fprintf_filtered (file, "\t(raw ");
|
|
print_hex_chars (file, valaddr, TYPE_LENGTH (regtype), byte_order,
|
|
true);
|
|
fprintf_filtered (file, ")");
|
|
}
|
|
}
|
|
else
|
|
{
|
|
struct value_print_options opts;
|
|
|
|
/* Print the register in hex. */
|
|
get_formatted_print_options (&opts, 'x');
|
|
opts.deref_ref = 1;
|
|
common_val_print (val, file, 0, &opts, current_language);
|
|
|
|
if (print_raw_format)
|
|
{
|
|
if (regnum == RISCV_CSR_MSTATUS_REGNUM)
|
|
{
|
|
LONGEST d;
|
|
int size = register_size (gdbarch, regnum);
|
|
unsigned xlen;
|
|
|
|
/* The SD field is always in the upper bit of MSTATUS, regardless
|
|
of the number of bits in MSTATUS. */
|
|
d = value_as_long (val);
|
|
xlen = size * 8;
|
|
fprintf_filtered (file,
|
|
"\tSD:%X VM:%02X MXR:%X PUM:%X MPRV:%X XS:%X "
|
|
"FS:%X MPP:%x HPP:%X SPP:%X MPIE:%X HPIE:%X "
|
|
"SPIE:%X UPIE:%X MIE:%X HIE:%X SIE:%X UIE:%X",
|
|
(int) ((d >> (xlen - 1)) & 0x1),
|
|
(int) ((d >> 24) & 0x1f),
|
|
(int) ((d >> 19) & 0x1),
|
|
(int) ((d >> 18) & 0x1),
|
|
(int) ((d >> 17) & 0x1),
|
|
(int) ((d >> 15) & 0x3),
|
|
(int) ((d >> 13) & 0x3),
|
|
(int) ((d >> 11) & 0x3),
|
|
(int) ((d >> 9) & 0x3),
|
|
(int) ((d >> 8) & 0x1),
|
|
(int) ((d >> 7) & 0x1),
|
|
(int) ((d >> 6) & 0x1),
|
|
(int) ((d >> 5) & 0x1),
|
|
(int) ((d >> 4) & 0x1),
|
|
(int) ((d >> 3) & 0x1),
|
|
(int) ((d >> 2) & 0x1),
|
|
(int) ((d >> 1) & 0x1),
|
|
(int) ((d >> 0) & 0x1));
|
|
}
|
|
else if (regnum == RISCV_CSR_MISA_REGNUM)
|
|
{
|
|
int base;
|
|
unsigned xlen, i;
|
|
LONGEST d;
|
|
int size = register_size (gdbarch, regnum);
|
|
|
|
/* The MXL field is always in the upper two bits of MISA,
|
|
regardless of the number of bits in MISA. Mask out other
|
|
bits to ensure we have a positive value. */
|
|
d = value_as_long (val);
|
|
base = (d >> ((size * 8) - 2)) & 0x3;
|
|
xlen = 16;
|
|
|
|
for (; base > 0; base--)
|
|
xlen *= 2;
|
|
fprintf_filtered (file, "\tRV%d", xlen);
|
|
|
|
for (i = 0; i < 26; i++)
|
|
{
|
|
if (d & (1 << i))
|
|
fprintf_filtered (file, "%c", 'A' + i);
|
|
}
|
|
}
|
|
else if (regnum == RISCV_CSR_FCSR_REGNUM
|
|
|| regnum == RISCV_CSR_FFLAGS_REGNUM
|
|
|| regnum == RISCV_CSR_FRM_REGNUM)
|
|
{
|
|
LONGEST d;
|
|
|
|
d = value_as_long (val);
|
|
|
|
fprintf_filtered (file, "\t");
|
|
if (regnum != RISCV_CSR_FRM_REGNUM)
|
|
fprintf_filtered (file,
|
|
"RD:%01X NV:%d DZ:%d OF:%d UF:%d NX:%d",
|
|
(int) ((d >> 5) & 0x7),
|
|
(int) ((d >> 4) & 0x1),
|
|
(int) ((d >> 3) & 0x1),
|
|
(int) ((d >> 2) & 0x1),
|
|
(int) ((d >> 1) & 0x1),
|
|
(int) ((d >> 0) & 0x1));
|
|
|
|
if (regnum != RISCV_CSR_FFLAGS_REGNUM)
|
|
{
|
|
static const char * const sfrm[] =
|
|
{
|
|
"RNE (round to nearest; ties to even)",
|
|
"RTZ (Round towards zero)",
|
|
"RDN (Round down towards -INF)",
|
|
"RUP (Round up towards +INF)",
|
|
"RMM (Round to nearest; ties to max magnitude)",
|
|
"INVALID[5]",
|
|
"INVALID[6]",
|
|
"dynamic rounding mode",
|
|
};
|
|
int frm = ((regnum == RISCV_CSR_FCSR_REGNUM)
|
|
? (d >> 5) : d) & 0x3;
|
|
|
|
fprintf_filtered (file, "%sFRM:%i [%s]",
|
|
(regnum == RISCV_CSR_FCSR_REGNUM
|
|
? " " : ""),
|
|
frm, sfrm[frm]);
|
|
}
|
|
}
|
|
else if (regnum == RISCV_PRIV_REGNUM)
|
|
{
|
|
LONGEST d;
|
|
uint8_t priv;
|
|
|
|
d = value_as_long (val);
|
|
priv = d & 0xff;
|
|
|
|
if (priv < 4)
|
|
{
|
|
static const char * const sprv[] =
|
|
{
|
|
"User/Application",
|
|
"Supervisor",
|
|
"Hypervisor",
|
|
"Machine"
|
|
};
|
|
fprintf_filtered (file, "\tprv:%d [%s]",
|
|
priv, sprv[priv]);
|
|
}
|
|
else
|
|
fprintf_filtered (file, "\tprv:%d [INVALID]", priv);
|
|
}
|
|
else
|
|
{
|
|
/* If not a vector register, print it also according to its
|
|
natural format. */
|
|
if (regtype->is_vector () == 0)
|
|
{
|
|
get_user_print_options (&opts);
|
|
opts.deref_ref = 1;
|
|
fprintf_filtered (file, "\t");
|
|
common_val_print (val, file, 0, &opts, current_language);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
fprintf_filtered (file, "\n");
|
|
}
|
|
|
|
/* Return true if REGNUM is a valid CSR register. The CSR register space
|
|
is sparsely populated, so not every number is a named CSR. */
|
|
|
|
static bool
|
|
riscv_is_regnum_a_named_csr (int regnum)
|
|
{
|
|
gdb_assert (regnum >= RISCV_FIRST_CSR_REGNUM
|
|
&& regnum <= RISCV_LAST_CSR_REGNUM);
|
|
|
|
switch (regnum)
|
|
{
|
|
#define DECLARE_CSR(name, num, class, define_ver, abort_ver) case RISCV_ ## num ## _REGNUM:
|
|
#include "opcode/riscv-opc.h"
|
|
#undef DECLARE_CSR
|
|
return true;
|
|
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
/* Implement the register_reggroup_p gdbarch method. Is REGNUM a member
|
|
of REGGROUP? */
|
|
|
|
static int
|
|
riscv_register_reggroup_p (struct gdbarch *gdbarch, int regnum,
|
|
struct reggroup *reggroup)
|
|
{
|
|
/* Used by 'info registers' and 'info registers <groupname>'. */
|
|
|
|
if (gdbarch_register_name (gdbarch, regnum) == NULL
|
|
|| gdbarch_register_name (gdbarch, regnum)[0] == '\0')
|
|
return 0;
|
|
|
|
if (regnum > RISCV_LAST_REGNUM)
|
|
{
|
|
/* Any extra registers from the CSR tdesc_feature (identified in
|
|
riscv_tdesc_unknown_reg) are removed from the save/restore groups
|
|
as some targets (QEMU) report CSRs which then can't be read. */
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
if ((reggroup == restore_reggroup || reggroup == save_reggroup)
|
|
&& regnum >= tdep->unknown_csrs_first_regnum
|
|
&& regnum < (tdep->unknown_csrs_first_regnum
|
|
+ tdep->unknown_csrs_count))
|
|
return 0;
|
|
|
|
/* This is some other unknown register from the target description.
|
|
In this case we trust whatever the target description says about
|
|
which groups this register should be in. */
|
|
int ret = tdesc_register_in_reggroup_p (gdbarch, regnum, reggroup);
|
|
if (ret != -1)
|
|
return ret;
|
|
|
|
return default_register_reggroup_p (gdbarch, regnum, reggroup);
|
|
}
|
|
|
|
if (reggroup == all_reggroup)
|
|
{
|
|
if (regnum < RISCV_FIRST_CSR_REGNUM || regnum == RISCV_PRIV_REGNUM)
|
|
return 1;
|
|
if (riscv_is_regnum_a_named_csr (regnum))
|
|
return 1;
|
|
return 0;
|
|
}
|
|
else if (reggroup == float_reggroup)
|
|
return (riscv_is_fp_regno_p (regnum)
|
|
|| regnum == RISCV_CSR_FCSR_REGNUM
|
|
|| regnum == RISCV_CSR_FFLAGS_REGNUM
|
|
|| regnum == RISCV_CSR_FRM_REGNUM);
|
|
else if (reggroup == general_reggroup)
|
|
return regnum < RISCV_FIRST_FP_REGNUM;
|
|
else if (reggroup == restore_reggroup || reggroup == save_reggroup)
|
|
{
|
|
if (riscv_has_fp_regs (gdbarch))
|
|
return (regnum <= RISCV_LAST_FP_REGNUM
|
|
|| regnum == RISCV_CSR_FCSR_REGNUM
|
|
|| regnum == RISCV_CSR_FFLAGS_REGNUM
|
|
|| regnum == RISCV_CSR_FRM_REGNUM);
|
|
else
|
|
return regnum < RISCV_FIRST_FP_REGNUM;
|
|
}
|
|
else if (reggroup == system_reggroup || reggroup == csr_reggroup)
|
|
{
|
|
if (regnum == RISCV_PRIV_REGNUM)
|
|
return 1;
|
|
if (regnum < RISCV_FIRST_CSR_REGNUM || regnum > RISCV_LAST_CSR_REGNUM)
|
|
return 0;
|
|
if (riscv_is_regnum_a_named_csr (regnum))
|
|
return 1;
|
|
return 0;
|
|
}
|
|
else if (reggroup == vector_reggroup)
|
|
return 0;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
/* Implement the print_registers_info gdbarch method. This is used by
|
|
'info registers' and 'info all-registers'. */
|
|
|
|
static void
|
|
riscv_print_registers_info (struct gdbarch *gdbarch,
|
|
struct ui_file *file,
|
|
struct frame_info *frame,
|
|
int regnum, int print_all)
|
|
{
|
|
if (regnum != -1)
|
|
{
|
|
/* Print one specified register. */
|
|
if (gdbarch_register_name (gdbarch, regnum) == NULL
|
|
|| *(gdbarch_register_name (gdbarch, regnum)) == '\0')
|
|
error (_("Not a valid register for the current processor type"));
|
|
riscv_print_one_register_info (gdbarch, file, frame, regnum);
|
|
}
|
|
else
|
|
{
|
|
struct reggroup *reggroup;
|
|
|
|
if (print_all)
|
|
reggroup = all_reggroup;
|
|
else
|
|
reggroup = general_reggroup;
|
|
|
|
for (regnum = 0; regnum < gdbarch_num_cooked_regs (gdbarch); ++regnum)
|
|
{
|
|
/* Zero never changes, so might as well hide by default. */
|
|
if (regnum == RISCV_ZERO_REGNUM && !print_all)
|
|
continue;
|
|
|
|
/* Registers with no name are not valid on this ISA. */
|
|
if (gdbarch_register_name (gdbarch, regnum) == NULL
|
|
|| *(gdbarch_register_name (gdbarch, regnum)) == '\0')
|
|
continue;
|
|
|
|
/* Is the register in the group we're interested in? */
|
|
if (!gdbarch_register_reggroup_p (gdbarch, regnum, reggroup))
|
|
continue;
|
|
|
|
riscv_print_one_register_info (gdbarch, file, frame, regnum);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Class that handles one decoded RiscV instruction. */
|
|
|
|
class riscv_insn
|
|
{
|
|
public:
|
|
|
|
/* Enum of all the opcodes that GDB cares about during the prologue scan. */
|
|
enum opcode
|
|
{
|
|
/* Unknown value is used at initialisation time. */
|
|
UNKNOWN = 0,
|
|
|
|
/* These instructions are all the ones we are interested in during the
|
|
prologue scan. */
|
|
ADD,
|
|
ADDI,
|
|
ADDIW,
|
|
ADDW,
|
|
AUIPC,
|
|
LUI,
|
|
SD,
|
|
SW,
|
|
/* These are needed for software breakpoint support. */
|
|
JAL,
|
|
JALR,
|
|
BEQ,
|
|
BNE,
|
|
BLT,
|
|
BGE,
|
|
BLTU,
|
|
BGEU,
|
|
/* These are needed for stepping over atomic sequences. */
|
|
LR,
|
|
SC,
|
|
|
|
/* Other instructions are not interesting during the prologue scan, and
|
|
are ignored. */
|
|
OTHER
|
|
};
|
|
|
|
riscv_insn ()
|
|
: m_length (0),
|
|
m_opcode (OTHER),
|
|
m_rd (0),
|
|
m_rs1 (0),
|
|
m_rs2 (0)
|
|
{
|
|
/* Nothing. */
|
|
}
|
|
|
|
void decode (struct gdbarch *gdbarch, CORE_ADDR pc);
|
|
|
|
/* Get the length of the instruction in bytes. */
|
|
int length () const
|
|
{ return m_length; }
|
|
|
|
/* Get the opcode for this instruction. */
|
|
enum opcode opcode () const
|
|
{ return m_opcode; }
|
|
|
|
/* Get destination register field for this instruction. This is only
|
|
valid if the OPCODE implies there is such a field for this
|
|
instruction. */
|
|
int rd () const
|
|
{ return m_rd; }
|
|
|
|
/* Get the RS1 register field for this instruction. This is only valid
|
|
if the OPCODE implies there is such a field for this instruction. */
|
|
int rs1 () const
|
|
{ return m_rs1; }
|
|
|
|
/* Get the RS2 register field for this instruction. This is only valid
|
|
if the OPCODE implies there is such a field for this instruction. */
|
|
int rs2 () const
|
|
{ return m_rs2; }
|
|
|
|
/* Get the immediate for this instruction in signed form. This is only
|
|
valid if the OPCODE implies there is such a field for this
|
|
instruction. */
|
|
int imm_signed () const
|
|
{ return m_imm.s; }
|
|
|
|
private:
|
|
|
|
/* Extract 5 bit register field at OFFSET from instruction OPCODE. */
|
|
int decode_register_index (unsigned long opcode, int offset)
|
|
{
|
|
return (opcode >> offset) & 0x1F;
|
|
}
|
|
|
|
/* Extract 5 bit register field at OFFSET from instruction OPCODE. */
|
|
int decode_register_index_short (unsigned long opcode, int offset)
|
|
{
|
|
return ((opcode >> offset) & 0x7) + 8;
|
|
}
|
|
|
|
/* Helper for DECODE, decode 32-bit R-type instruction. */
|
|
void decode_r_type_insn (enum opcode opcode, ULONGEST ival)
|
|
{
|
|
m_opcode = opcode;
|
|
m_rd = decode_register_index (ival, OP_SH_RD);
|
|
m_rs1 = decode_register_index (ival, OP_SH_RS1);
|
|
m_rs2 = decode_register_index (ival, OP_SH_RS2);
|
|
}
|
|
|
|
/* Helper for DECODE, decode 16-bit compressed R-type instruction. */
|
|
void decode_cr_type_insn (enum opcode opcode, ULONGEST ival)
|
|
{
|
|
m_opcode = opcode;
|
|
m_rd = m_rs1 = decode_register_index (ival, OP_SH_CRS1S);
|
|
m_rs2 = decode_register_index (ival, OP_SH_CRS2);
|
|
}
|
|
|
|
/* Helper for DECODE, decode 32-bit I-type instruction. */
|
|
void decode_i_type_insn (enum opcode opcode, ULONGEST ival)
|
|
{
|
|
m_opcode = opcode;
|
|
m_rd = decode_register_index (ival, OP_SH_RD);
|
|
m_rs1 = decode_register_index (ival, OP_SH_RS1);
|
|
m_imm.s = EXTRACT_ITYPE_IMM (ival);
|
|
}
|
|
|
|
/* Helper for DECODE, decode 16-bit compressed I-type instruction. */
|
|
void decode_ci_type_insn (enum opcode opcode, ULONGEST ival)
|
|
{
|
|
m_opcode = opcode;
|
|
m_rd = m_rs1 = decode_register_index (ival, OP_SH_CRS1S);
|
|
m_imm.s = EXTRACT_RVC_IMM (ival);
|
|
}
|
|
|
|
/* Helper for DECODE, decode 32-bit S-type instruction. */
|
|
void decode_s_type_insn (enum opcode opcode, ULONGEST ival)
|
|
{
|
|
m_opcode = opcode;
|
|
m_rs1 = decode_register_index (ival, OP_SH_RS1);
|
|
m_rs2 = decode_register_index (ival, OP_SH_RS2);
|
|
m_imm.s = EXTRACT_STYPE_IMM (ival);
|
|
}
|
|
|
|
/* Helper for DECODE, decode 16-bit CS-type instruction. The immediate
|
|
encoding is different for each CS format instruction, so extracting
|
|
the immediate is left up to the caller, who should pass the extracted
|
|
immediate value through in IMM. */
|
|
void decode_cs_type_insn (enum opcode opcode, ULONGEST ival, int imm)
|
|
{
|
|
m_opcode = opcode;
|
|
m_imm.s = imm;
|
|
m_rs1 = decode_register_index_short (ival, OP_SH_CRS1S);
|
|
m_rs2 = decode_register_index_short (ival, OP_SH_CRS2S);
|
|
}
|
|
|
|
/* Helper for DECODE, decode 16-bit CSS-type instruction. The immediate
|
|
encoding is different for each CSS format instruction, so extracting
|
|
the immediate is left up to the caller, who should pass the extracted
|
|
immediate value through in IMM. */
|
|
void decode_css_type_insn (enum opcode opcode, ULONGEST ival, int imm)
|
|
{
|
|
m_opcode = opcode;
|
|
m_imm.s = imm;
|
|
m_rs1 = RISCV_SP_REGNUM;
|
|
/* Not a compressed register number in this case. */
|
|
m_rs2 = decode_register_index (ival, OP_SH_CRS2);
|
|
}
|
|
|
|
/* Helper for DECODE, decode 32-bit U-type instruction. */
|
|
void decode_u_type_insn (enum opcode opcode, ULONGEST ival)
|
|
{
|
|
m_opcode = opcode;
|
|
m_rd = decode_register_index (ival, OP_SH_RD);
|
|
m_imm.s = EXTRACT_UTYPE_IMM (ival);
|
|
}
|
|
|
|
/* Helper for DECODE, decode 32-bit J-type instruction. */
|
|
void decode_j_type_insn (enum opcode opcode, ULONGEST ival)
|
|
{
|
|
m_opcode = opcode;
|
|
m_rd = decode_register_index (ival, OP_SH_RD);
|
|
m_imm.s = EXTRACT_UJTYPE_IMM (ival);
|
|
}
|
|
|
|
/* Helper for DECODE, decode 32-bit J-type instruction. */
|
|
void decode_cj_type_insn (enum opcode opcode, ULONGEST ival)
|
|
{
|
|
m_opcode = opcode;
|
|
m_imm.s = EXTRACT_RVC_J_IMM (ival);
|
|
}
|
|
|
|
void decode_b_type_insn (enum opcode opcode, ULONGEST ival)
|
|
{
|
|
m_opcode = opcode;
|
|
m_rs1 = decode_register_index (ival, OP_SH_RS1);
|
|
m_rs2 = decode_register_index (ival, OP_SH_RS2);
|
|
m_imm.s = EXTRACT_SBTYPE_IMM (ival);
|
|
}
|
|
|
|
void decode_cb_type_insn (enum opcode opcode, ULONGEST ival)
|
|
{
|
|
m_opcode = opcode;
|
|
m_rs1 = decode_register_index_short (ival, OP_SH_CRS1S);
|
|
m_imm.s = EXTRACT_RVC_B_IMM (ival);
|
|
}
|
|
|
|
/* Fetch instruction from target memory at ADDR, return the content of
|
|
the instruction, and update LEN with the instruction length. */
|
|
static ULONGEST fetch_instruction (struct gdbarch *gdbarch,
|
|
CORE_ADDR addr, int *len);
|
|
|
|
/* The length of the instruction in bytes. Should be 2 or 4. */
|
|
int m_length;
|
|
|
|
/* The instruction opcode. */
|
|
enum opcode m_opcode;
|
|
|
|
/* The three possible registers an instruction might reference. Not
|
|
every instruction fills in all of these registers. Which fields are
|
|
valid depends on the opcode. The naming of these fields matches the
|
|
naming in the riscv isa manual. */
|
|
int m_rd;
|
|
int m_rs1;
|
|
int m_rs2;
|
|
|
|
/* Possible instruction immediate. This is only valid if the instruction
|
|
format contains an immediate, not all instruction, whether this is
|
|
valid depends on the opcode. Despite only having one format for now
|
|
the immediate is packed into a union, later instructions might require
|
|
an unsigned formatted immediate, having the union in place now will
|
|
reduce the need for code churn later. */
|
|
union riscv_insn_immediate
|
|
{
|
|
riscv_insn_immediate ()
|
|
: s (0)
|
|
{
|
|
/* Nothing. */
|
|
}
|
|
|
|
int s;
|
|
} m_imm;
|
|
};
|
|
|
|
/* Fetch instruction from target memory at ADDR, return the content of the
|
|
instruction, and update LEN with the instruction length. */
|
|
|
|
ULONGEST
|
|
riscv_insn::fetch_instruction (struct gdbarch *gdbarch,
|
|
CORE_ADDR addr, int *len)
|
|
{
|
|
enum bfd_endian byte_order = gdbarch_byte_order_for_code (gdbarch);
|
|
gdb_byte buf[8];
|
|
int instlen, status;
|
|
|
|
/* All insns are at least 16 bits. */
|
|
status = target_read_memory (addr, buf, 2);
|
|
if (status)
|
|
memory_error (TARGET_XFER_E_IO, addr);
|
|
|
|
/* If we need more, grab it now. */
|
|
instlen = riscv_insn_length (buf[0]);
|
|
gdb_assert (instlen <= sizeof (buf));
|
|
*len = instlen;
|
|
|
|
if (instlen > 2)
|
|
{
|
|
status = target_read_memory (addr + 2, buf + 2, instlen - 2);
|
|
if (status)
|
|
memory_error (TARGET_XFER_E_IO, addr + 2);
|
|
}
|
|
|
|
return extract_unsigned_integer (buf, instlen, byte_order);
|
|
}
|
|
|
|
/* Fetch from target memory an instruction at PC and decode it. This can
|
|
throw an error if the memory access fails, callers are responsible for
|
|
handling this error if that is appropriate. */
|
|
|
|
void
|
|
riscv_insn::decode (struct gdbarch *gdbarch, CORE_ADDR pc)
|
|
{
|
|
ULONGEST ival;
|
|
|
|
/* Fetch the instruction, and the instructions length. */
|
|
ival = fetch_instruction (gdbarch, pc, &m_length);
|
|
|
|
if (m_length == 4)
|
|
{
|
|
if (is_add_insn (ival))
|
|
decode_r_type_insn (ADD, ival);
|
|
else if (is_addw_insn (ival))
|
|
decode_r_type_insn (ADDW, ival);
|
|
else if (is_addi_insn (ival))
|
|
decode_i_type_insn (ADDI, ival);
|
|
else if (is_addiw_insn (ival))
|
|
decode_i_type_insn (ADDIW, ival);
|
|
else if (is_auipc_insn (ival))
|
|
decode_u_type_insn (AUIPC, ival);
|
|
else if (is_lui_insn (ival))
|
|
decode_u_type_insn (LUI, ival);
|
|
else if (is_sd_insn (ival))
|
|
decode_s_type_insn (SD, ival);
|
|
else if (is_sw_insn (ival))
|
|
decode_s_type_insn (SW, ival);
|
|
else if (is_jal_insn (ival))
|
|
decode_j_type_insn (JAL, ival);
|
|
else if (is_jalr_insn (ival))
|
|
decode_i_type_insn (JALR, ival);
|
|
else if (is_beq_insn (ival))
|
|
decode_b_type_insn (BEQ, ival);
|
|
else if (is_bne_insn (ival))
|
|
decode_b_type_insn (BNE, ival);
|
|
else if (is_blt_insn (ival))
|
|
decode_b_type_insn (BLT, ival);
|
|
else if (is_bge_insn (ival))
|
|
decode_b_type_insn (BGE, ival);
|
|
else if (is_bltu_insn (ival))
|
|
decode_b_type_insn (BLTU, ival);
|
|
else if (is_bgeu_insn (ival))
|
|
decode_b_type_insn (BGEU, ival);
|
|
else if (is_lr_w_insn (ival))
|
|
decode_r_type_insn (LR, ival);
|
|
else if (is_lr_d_insn (ival))
|
|
decode_r_type_insn (LR, ival);
|
|
else if (is_sc_w_insn (ival))
|
|
decode_r_type_insn (SC, ival);
|
|
else if (is_sc_d_insn (ival))
|
|
decode_r_type_insn (SC, ival);
|
|
else
|
|
/* None of the other fields are valid in this case. */
|
|
m_opcode = OTHER;
|
|
}
|
|
else if (m_length == 2)
|
|
{
|
|
int xlen = riscv_isa_xlen (gdbarch);
|
|
|
|
/* C_ADD and C_JALR have the same opcode. If RS2 is 0, then this is a
|
|
C_JALR. So must try to match C_JALR first as it has more bits in
|
|
mask. */
|
|
if (is_c_jalr_insn (ival))
|
|
decode_cr_type_insn (JALR, ival);
|
|
else if (is_c_add_insn (ival))
|
|
decode_cr_type_insn (ADD, ival);
|
|
/* C_ADDW is RV64 and RV128 only. */
|
|
else if (xlen != 4 && is_c_addw_insn (ival))
|
|
decode_cr_type_insn (ADDW, ival);
|
|
else if (is_c_addi_insn (ival))
|
|
decode_ci_type_insn (ADDI, ival);
|
|
/* C_ADDIW and C_JAL have the same opcode. C_ADDIW is RV64 and RV128
|
|
only and C_JAL is RV32 only. */
|
|
else if (xlen != 4 && is_c_addiw_insn (ival))
|
|
decode_ci_type_insn (ADDIW, ival);
|
|
else if (xlen == 4 && is_c_jal_insn (ival))
|
|
decode_cj_type_insn (JAL, ival);
|
|
/* C_ADDI16SP and C_LUI have the same opcode. If RD is 2, then this is a
|
|
C_ADDI16SP. So must try to match C_ADDI16SP first as it has more bits
|
|
in mask. */
|
|
else if (is_c_addi16sp_insn (ival))
|
|
{
|
|
m_opcode = ADDI;
|
|
m_rd = m_rs1 = decode_register_index (ival, OP_SH_RD);
|
|
m_imm.s = EXTRACT_RVC_ADDI16SP_IMM (ival);
|
|
}
|
|
else if (is_c_addi4spn_insn (ival))
|
|
{
|
|
m_opcode = ADDI;
|
|
m_rd = decode_register_index_short (ival, OP_SH_CRS2S);
|
|
m_rs1 = RISCV_SP_REGNUM;
|
|
m_imm.s = EXTRACT_RVC_ADDI4SPN_IMM (ival);
|
|
}
|
|
else if (is_c_lui_insn (ival))
|
|
{
|
|
m_opcode = LUI;
|
|
m_rd = decode_register_index (ival, OP_SH_CRS1S);
|
|
m_imm.s = EXTRACT_RVC_LUI_IMM (ival);
|
|
}
|
|
/* C_SD and C_FSW have the same opcode. C_SD is RV64 and RV128 only,
|
|
and C_FSW is RV32 only. */
|
|
else if (xlen != 4 && is_c_sd_insn (ival))
|
|
decode_cs_type_insn (SD, ival, EXTRACT_RVC_LD_IMM (ival));
|
|
else if (is_c_sw_insn (ival))
|
|
decode_cs_type_insn (SW, ival, EXTRACT_RVC_LW_IMM (ival));
|
|
else if (is_c_swsp_insn (ival))
|
|
decode_css_type_insn (SW, ival, EXTRACT_RVC_SWSP_IMM (ival));
|
|
else if (xlen != 4 && is_c_sdsp_insn (ival))
|
|
decode_css_type_insn (SD, ival, EXTRACT_RVC_SDSP_IMM (ival));
|
|
/* C_JR and C_MV have the same opcode. If RS2 is 0, then this is a C_JR.
|
|
So must try to match C_JR first as it ahs more bits in mask. */
|
|
else if (is_c_jr_insn (ival))
|
|
decode_cr_type_insn (JALR, ival);
|
|
else if (is_c_j_insn (ival))
|
|
decode_cj_type_insn (JAL, ival);
|
|
else if (is_c_beqz_insn (ival))
|
|
decode_cb_type_insn (BEQ, ival);
|
|
else if (is_c_bnez_insn (ival))
|
|
decode_cb_type_insn (BNE, ival);
|
|
else
|
|
/* None of the other fields of INSN are valid in this case. */
|
|
m_opcode = OTHER;
|
|
}
|
|
else
|
|
{
|
|
/* This must be a 6 or 8 byte instruction, we don't currently decode
|
|
any of these, so just ignore it. */
|
|
gdb_assert (m_length == 6 || m_length == 8);
|
|
m_opcode = OTHER;
|
|
}
|
|
}
|
|
|
|
/* The prologue scanner. This is currently only used for skipping the
|
|
prologue of a function when the DWARF information is not sufficient.
|
|
However, it is written with filling of the frame cache in mind, which
|
|
is why different groups of stack setup instructions are split apart
|
|
during the core of the inner loop. In the future, the intention is to
|
|
extend this function to fully support building up a frame cache that
|
|
can unwind register values when there is no DWARF information. */
|
|
|
|
static CORE_ADDR
|
|
riscv_scan_prologue (struct gdbarch *gdbarch,
|
|
CORE_ADDR start_pc, CORE_ADDR end_pc,
|
|
struct riscv_unwind_cache *cache)
|
|
{
|
|
CORE_ADDR cur_pc, next_pc, after_prologue_pc;
|
|
CORE_ADDR end_prologue_addr = 0;
|
|
|
|
/* Find an upper limit on the function prologue using the debug
|
|
information. If the debug information could not be used to provide
|
|
that bound, then use an arbitrary large number as the upper bound. */
|
|
after_prologue_pc = skip_prologue_using_sal (gdbarch, start_pc);
|
|
if (after_prologue_pc == 0)
|
|
after_prologue_pc = start_pc + 100; /* Arbitrary large number. */
|
|
if (after_prologue_pc < end_pc)
|
|
end_pc = after_prologue_pc;
|
|
|
|
pv_t regs[RISCV_NUM_INTEGER_REGS]; /* Number of GPR. */
|
|
for (int regno = 0; regno < RISCV_NUM_INTEGER_REGS; regno++)
|
|
regs[regno] = pv_register (regno, 0);
|
|
pv_area stack (RISCV_SP_REGNUM, gdbarch_addr_bit (gdbarch));
|
|
|
|
if (riscv_debug_unwinder)
|
|
fprintf_unfiltered
|
|
(gdb_stdlog,
|
|
"Prologue scan for function starting at %s (limit %s)\n",
|
|
core_addr_to_string (start_pc),
|
|
core_addr_to_string (end_pc));
|
|
|
|
for (next_pc = cur_pc = start_pc; cur_pc < end_pc; cur_pc = next_pc)
|
|
{
|
|
struct riscv_insn insn;
|
|
|
|
/* Decode the current instruction, and decide where the next
|
|
instruction lives based on the size of this instruction. */
|
|
insn.decode (gdbarch, cur_pc);
|
|
gdb_assert (insn.length () > 0);
|
|
next_pc = cur_pc + insn.length ();
|
|
|
|
/* Look for common stack adjustment insns. */
|
|
if ((insn.opcode () == riscv_insn::ADDI
|
|
|| insn.opcode () == riscv_insn::ADDIW)
|
|
&& insn.rd () == RISCV_SP_REGNUM
|
|
&& insn.rs1 () == RISCV_SP_REGNUM)
|
|
{
|
|
/* Handle: addi sp, sp, -i
|
|
or: addiw sp, sp, -i */
|
|
gdb_assert (insn.rd () < RISCV_NUM_INTEGER_REGS);
|
|
gdb_assert (insn.rs1 () < RISCV_NUM_INTEGER_REGS);
|
|
regs[insn.rd ()]
|
|
= pv_add_constant (regs[insn.rs1 ()], insn.imm_signed ());
|
|
}
|
|
else if ((insn.opcode () == riscv_insn::SW
|
|
|| insn.opcode () == riscv_insn::SD)
|
|
&& (insn.rs1 () == RISCV_SP_REGNUM
|
|
|| insn.rs1 () == RISCV_FP_REGNUM))
|
|
{
|
|
/* Handle: sw reg, offset(sp)
|
|
or: sd reg, offset(sp)
|
|
or: sw reg, offset(s0)
|
|
or: sd reg, offset(s0) */
|
|
/* Instruction storing a register onto the stack. */
|
|
gdb_assert (insn.rs1 () < RISCV_NUM_INTEGER_REGS);
|
|
gdb_assert (insn.rs2 () < RISCV_NUM_INTEGER_REGS);
|
|
stack.store (pv_add_constant (regs[insn.rs1 ()], insn.imm_signed ()),
|
|
(insn.opcode () == riscv_insn::SW ? 4 : 8),
|
|
regs[insn.rs2 ()]);
|
|
}
|
|
else if (insn.opcode () == riscv_insn::ADDI
|
|
&& insn.rd () == RISCV_FP_REGNUM
|
|
&& insn.rs1 () == RISCV_SP_REGNUM)
|
|
{
|
|
/* Handle: addi s0, sp, size */
|
|
/* Instructions setting up the frame pointer. */
|
|
gdb_assert (insn.rd () < RISCV_NUM_INTEGER_REGS);
|
|
gdb_assert (insn.rs1 () < RISCV_NUM_INTEGER_REGS);
|
|
regs[insn.rd ()]
|
|
= pv_add_constant (regs[insn.rs1 ()], insn.imm_signed ());
|
|
}
|
|
else if ((insn.opcode () == riscv_insn::ADD
|
|
|| insn.opcode () == riscv_insn::ADDW)
|
|
&& insn.rd () == RISCV_FP_REGNUM
|
|
&& insn.rs1 () == RISCV_SP_REGNUM
|
|
&& insn.rs2 () == RISCV_ZERO_REGNUM)
|
|
{
|
|
/* Handle: add s0, sp, 0
|
|
or: addw s0, sp, 0 */
|
|
/* Instructions setting up the frame pointer. */
|
|
gdb_assert (insn.rd () < RISCV_NUM_INTEGER_REGS);
|
|
gdb_assert (insn.rs1 () < RISCV_NUM_INTEGER_REGS);
|
|
regs[insn.rd ()] = pv_add_constant (regs[insn.rs1 ()], 0);
|
|
}
|
|
else if ((insn.opcode () == riscv_insn::ADDI
|
|
&& insn.rd () == RISCV_ZERO_REGNUM
|
|
&& insn.rs1 () == RISCV_ZERO_REGNUM
|
|
&& insn.imm_signed () == 0))
|
|
{
|
|
/* Handle: add x0, x0, 0 (NOP) */
|
|
}
|
|
else if (insn.opcode () == riscv_insn::AUIPC)
|
|
{
|
|
gdb_assert (insn.rd () < RISCV_NUM_INTEGER_REGS);
|
|
regs[insn.rd ()] = pv_constant (cur_pc + insn.imm_signed ());
|
|
}
|
|
else if (insn.opcode () == riscv_insn::LUI)
|
|
{
|
|
/* Handle: lui REG, n
|
|
Where REG is not gp register. */
|
|
gdb_assert (insn.rd () < RISCV_NUM_INTEGER_REGS);
|
|
regs[insn.rd ()] = pv_constant (insn.imm_signed ());
|
|
}
|
|
else if (insn.opcode () == riscv_insn::ADDI)
|
|
{
|
|
/* Handle: addi REG1, REG2, IMM */
|
|
gdb_assert (insn.rd () < RISCV_NUM_INTEGER_REGS);
|
|
gdb_assert (insn.rs1 () < RISCV_NUM_INTEGER_REGS);
|
|
regs[insn.rd ()]
|
|
= pv_add_constant (regs[insn.rs1 ()], insn.imm_signed ());
|
|
}
|
|
else if (insn.opcode () == riscv_insn::ADD)
|
|
{
|
|
/* Handle: addi REG1, REG2, IMM */
|
|
gdb_assert (insn.rd () < RISCV_NUM_INTEGER_REGS);
|
|
gdb_assert (insn.rs1 () < RISCV_NUM_INTEGER_REGS);
|
|
gdb_assert (insn.rs2 () < RISCV_NUM_INTEGER_REGS);
|
|
regs[insn.rd ()] = pv_add (regs[insn.rs1 ()], regs[insn.rs2 ()]);
|
|
}
|
|
else
|
|
{
|
|
end_prologue_addr = cur_pc;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (end_prologue_addr == 0)
|
|
end_prologue_addr = cur_pc;
|
|
|
|
if (riscv_debug_unwinder)
|
|
fprintf_unfiltered (gdb_stdlog, "End of prologue at %s\n",
|
|
core_addr_to_string (end_prologue_addr));
|
|
|
|
if (cache != NULL)
|
|
{
|
|
/* Figure out if it is a frame pointer or just a stack pointer. Also
|
|
the offset held in the pv_t is from the original register value to
|
|
the current value, which for a grows down stack means a negative
|
|
value. The FRAME_BASE_OFFSET is the negation of this, how to get
|
|
from the current value to the original value. */
|
|
if (pv_is_register (regs[RISCV_FP_REGNUM], RISCV_SP_REGNUM))
|
|
{
|
|
cache->frame_base_reg = RISCV_FP_REGNUM;
|
|
cache->frame_base_offset = -regs[RISCV_FP_REGNUM].k;
|
|
}
|
|
else
|
|
{
|
|
cache->frame_base_reg = RISCV_SP_REGNUM;
|
|
cache->frame_base_offset = -regs[RISCV_SP_REGNUM].k;
|
|
}
|
|
|
|
/* Assign offset from old SP to all saved registers. As we don't
|
|
have the previous value for the frame base register at this
|
|
point, we store the offset as the address in the trad_frame, and
|
|
then convert this to an actual address later. */
|
|
for (int i = 0; i <= RISCV_NUM_INTEGER_REGS; i++)
|
|
{
|
|
CORE_ADDR offset;
|
|
if (stack.find_reg (gdbarch, i, &offset))
|
|
{
|
|
if (riscv_debug_unwinder)
|
|
{
|
|
/* Display OFFSET as a signed value, the offsets are from
|
|
the frame base address to the registers location on
|
|
the stack, with a descending stack this means the
|
|
offsets are always negative. */
|
|
fprintf_unfiltered (gdb_stdlog,
|
|
"Register $%s at stack offset %s\n",
|
|
gdbarch_register_name (gdbarch, i),
|
|
plongest ((LONGEST) offset));
|
|
}
|
|
trad_frame_set_addr (cache->regs, i, offset);
|
|
}
|
|
}
|
|
}
|
|
|
|
return end_prologue_addr;
|
|
}
|
|
|
|
/* Implement the riscv_skip_prologue gdbarch method. */
|
|
|
|
static CORE_ADDR
|
|
riscv_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
|
|
{
|
|
CORE_ADDR func_addr;
|
|
|
|
/* See if we can determine the end of the prologue via the symbol
|
|
table. If so, then return either PC, or the PC after the
|
|
prologue, whichever is greater. */
|
|
if (find_pc_partial_function (pc, NULL, &func_addr, NULL))
|
|
{
|
|
CORE_ADDR post_prologue_pc
|
|
= skip_prologue_using_sal (gdbarch, func_addr);
|
|
|
|
if (post_prologue_pc != 0)
|
|
return std::max (pc, post_prologue_pc);
|
|
}
|
|
|
|
/* Can't determine prologue from the symbol table, need to examine
|
|
instructions. Pass -1 for the end address to indicate the prologue
|
|
scanner can scan as far as it needs to find the end of the prologue. */
|
|
return riscv_scan_prologue (gdbarch, pc, ((CORE_ADDR) -1), NULL);
|
|
}
|
|
|
|
/* Implement the gdbarch push dummy code callback. */
|
|
|
|
static CORE_ADDR
|
|
riscv_push_dummy_code (struct gdbarch *gdbarch, CORE_ADDR sp,
|
|
CORE_ADDR funaddr, struct value **args, int nargs,
|
|
struct type *value_type, CORE_ADDR *real_pc,
|
|
CORE_ADDR *bp_addr, struct regcache *regcache)
|
|
{
|
|
/* A nop instruction is 'add x0, x0, 0'. */
|
|
static const gdb_byte nop_insn[] = { 0x13, 0x00, 0x00, 0x00 };
|
|
|
|
/* Allocate space for a breakpoint, and keep the stack correctly
|
|
aligned. The space allocated here must be at least big enough to
|
|
accommodate the NOP_INSN defined above. */
|
|
sp -= 16;
|
|
*bp_addr = sp;
|
|
*real_pc = funaddr;
|
|
|
|
/* When we insert a breakpoint we select whether to use a compressed
|
|
breakpoint or not based on the existing contents of the memory.
|
|
|
|
If the breakpoint is being placed onto the stack as part of setting up
|
|
for an inferior call from GDB, then the existing stack contents may
|
|
randomly appear to be a compressed instruction, causing GDB to insert
|
|
a compressed breakpoint. If this happens on a target that does not
|
|
support compressed instructions then this could cause problems.
|
|
|
|
To prevent this issue we write an uncompressed nop onto the stack at
|
|
the location where the breakpoint will be inserted. In this way we
|
|
ensure that we always use an uncompressed breakpoint, which should
|
|
work on all targets.
|
|
|
|
We call TARGET_WRITE_MEMORY here so that if the write fails we don't
|
|
throw an exception. Instead we ignore the error and move on. The
|
|
assumption is that either GDB will error later when actually trying to
|
|
insert a software breakpoint, or GDB will use hardware breakpoints and
|
|
there will be no need to write to memory later. */
|
|
int status = target_write_memory (*bp_addr, nop_insn, sizeof (nop_insn));
|
|
|
|
if (riscv_debug_breakpoints || riscv_debug_infcall)
|
|
fprintf_unfiltered (gdb_stdlog,
|
|
"Writing %s-byte nop instruction to %s: %s\n",
|
|
plongest (sizeof (nop_insn)),
|
|
paddress (gdbarch, *bp_addr),
|
|
(status == 0 ? "success" : "failed"));
|
|
|
|
return sp;
|
|
}
|
|
|
|
/* Implement the gdbarch type alignment method, overrides the generic
|
|
alignment algorithm for anything that is RISC-V specific. */
|
|
|
|
static ULONGEST
|
|
riscv_type_align (gdbarch *gdbarch, type *type)
|
|
{
|
|
type = check_typedef (type);
|
|
if (type->code () == TYPE_CODE_ARRAY && type->is_vector ())
|
|
return std::min (TYPE_LENGTH (type), (ULONGEST) BIGGEST_ALIGNMENT);
|
|
|
|
/* Anything else will be aligned by the generic code. */
|
|
return 0;
|
|
}
|
|
|
|
/* Holds information about a single argument either being passed to an
|
|
inferior function, or returned from an inferior function. This includes
|
|
information about the size, type, etc of the argument, and also
|
|
information about how the argument will be passed (or returned). */
|
|
|
|
struct riscv_arg_info
|
|
{
|
|
/* Contents of the argument. */
|
|
const gdb_byte *contents;
|
|
|
|
/* Length of argument. */
|
|
int length;
|
|
|
|
/* Alignment required for an argument of this type. */
|
|
int align;
|
|
|
|
/* The type for this argument. */
|
|
struct type *type;
|
|
|
|
/* Each argument can have either 1 or 2 locations assigned to it. Each
|
|
location describes where part of the argument will be placed. The
|
|
second location is valid based on the LOC_TYPE and C_LENGTH fields
|
|
of the first location (which is always valid). */
|
|
struct location
|
|
{
|
|
/* What type of location this is. */
|
|
enum location_type
|
|
{
|
|
/* Argument passed in a register. */
|
|
in_reg,
|
|
|
|
/* Argument passed as an on stack argument. */
|
|
on_stack,
|
|
|
|
/* Argument passed by reference. The second location is always
|
|
valid for a BY_REF argument, and describes where the address
|
|
of the BY_REF argument should be placed. */
|
|
by_ref
|
|
} loc_type;
|
|
|
|
/* Information that depends on the location type. */
|
|
union
|
|
{
|
|
/* Which register number to use. */
|
|
int regno;
|
|
|
|
/* The offset into the stack region. */
|
|
int offset;
|
|
} loc_data;
|
|
|
|
/* The length of contents covered by this location. If this is less
|
|
than the total length of the argument, then the second location
|
|
will be valid, and will describe where the rest of the argument
|
|
will go. */
|
|
int c_length;
|
|
|
|
/* The offset within CONTENTS for this part of the argument. This can
|
|
be non-zero even for the first part (the first field of a struct can
|
|
have a non-zero offset due to padding). For the second part of the
|
|
argument, this might be the C_LENGTH value of the first part,
|
|
however, if we are passing a structure in two registers, and there's
|
|
is padding between the first and second field, then this offset
|
|
might be greater than the length of the first argument part. When
|
|
the second argument location is not holding part of the argument
|
|
value, but is instead holding the address of a reference argument,
|
|
then this offset will be set to 0. */
|
|
int c_offset;
|
|
} argloc[2];
|
|
|
|
/* TRUE if this is an unnamed argument. */
|
|
bool is_unnamed;
|
|
};
|
|
|
|
/* Information about a set of registers being used for passing arguments as
|
|
part of a function call. The register set must be numerically
|
|
sequential from NEXT_REGNUM to LAST_REGNUM. The register set can be
|
|
disabled from use by setting NEXT_REGNUM greater than LAST_REGNUM. */
|
|
|
|
struct riscv_arg_reg
|
|
{
|
|
riscv_arg_reg (int first, int last)
|
|
: next_regnum (first),
|
|
last_regnum (last)
|
|
{
|
|
/* Nothing. */
|
|
}
|
|
|
|
/* The GDB register number to use in this set. */
|
|
int next_regnum;
|
|
|
|
/* The last GDB register number to use in this set. */
|
|
int last_regnum;
|
|
};
|
|
|
|
/* Arguments can be passed as on stack arguments, or by reference. The
|
|
on stack arguments must be in a continuous region starting from $sp,
|
|
while the by reference arguments can be anywhere, but we'll put them
|
|
on the stack after (at higher address) the on stack arguments.
|
|
|
|
This might not be the right approach to take. The ABI is clear that
|
|
an argument passed by reference can be modified by the callee, which
|
|
us placing the argument (temporarily) onto the stack will not achieve
|
|
(changes will be lost). There's also the possibility that very large
|
|
arguments could overflow the stack.
|
|
|
|
This struct is used to track offset into these two areas for where
|
|
arguments are to be placed. */
|
|
struct riscv_memory_offsets
|
|
{
|
|
riscv_memory_offsets ()
|
|
: arg_offset (0),
|
|
ref_offset (0)
|
|
{
|
|
/* Nothing. */
|
|
}
|
|
|
|
/* Offset into on stack argument area. */
|
|
int arg_offset;
|
|
|
|
/* Offset into the pass by reference area. */
|
|
int ref_offset;
|
|
};
|
|
|
|
/* Holds information about where arguments to a call will be placed. This
|
|
is updated as arguments are added onto the call, and can be used to
|
|
figure out where the next argument should be placed. */
|
|
|
|
struct riscv_call_info
|
|
{
|
|
riscv_call_info (struct gdbarch *gdbarch)
|
|
: int_regs (RISCV_A0_REGNUM, RISCV_A0_REGNUM + 7),
|
|
float_regs (RISCV_FA0_REGNUM, RISCV_FA0_REGNUM + 7)
|
|
{
|
|
xlen = riscv_abi_xlen (gdbarch);
|
|
flen = riscv_abi_flen (gdbarch);
|
|
|
|
/* Disable use of floating point registers if needed. */
|
|
if (!riscv_has_fp_abi (gdbarch))
|
|
float_regs.next_regnum = float_regs.last_regnum + 1;
|
|
}
|
|
|
|
/* Track the memory areas used for holding in-memory arguments to a
|
|
call. */
|
|
struct riscv_memory_offsets memory;
|
|
|
|
/* Holds information about the next integer register to use for passing
|
|
an argument. */
|
|
struct riscv_arg_reg int_regs;
|
|
|
|
/* Holds information about the next floating point register to use for
|
|
passing an argument. */
|
|
struct riscv_arg_reg float_regs;
|
|
|
|
/* The XLEN and FLEN are copied in to this structure for convenience, and
|
|
are just the results of calling RISCV_ABI_XLEN and RISCV_ABI_FLEN. */
|
|
int xlen;
|
|
int flen;
|
|
};
|
|
|
|
/* Return the number of registers available for use as parameters in the
|
|
register set REG. Returned value can be 0 or more. */
|
|
|
|
static int
|
|
riscv_arg_regs_available (struct riscv_arg_reg *reg)
|
|
{
|
|
if (reg->next_regnum > reg->last_regnum)
|
|
return 0;
|
|
|
|
return (reg->last_regnum - reg->next_regnum + 1);
|
|
}
|
|
|
|
/* If there is at least one register available in the register set REG then
|
|
the next register from REG is assigned to LOC and the length field of
|
|
LOC is updated to LENGTH. The register set REG is updated to indicate
|
|
that the assigned register is no longer available and the function
|
|
returns true.
|
|
|
|
If there are no registers available in REG then the function returns
|
|
false, and LOC and REG are unchanged. */
|
|
|
|
static bool
|
|
riscv_assign_reg_location (struct riscv_arg_info::location *loc,
|
|
struct riscv_arg_reg *reg,
|
|
int length, int offset)
|
|
{
|
|
if (reg->next_regnum <= reg->last_regnum)
|
|
{
|
|
loc->loc_type = riscv_arg_info::location::in_reg;
|
|
loc->loc_data.regno = reg->next_regnum;
|
|
reg->next_regnum++;
|
|
loc->c_length = length;
|
|
loc->c_offset = offset;
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
/* Assign LOC a location as the next stack parameter, and update MEMORY to
|
|
record that an area of stack has been used to hold the parameter
|
|
described by LOC.
|
|
|
|
The length field of LOC is updated to LENGTH, the length of the
|
|
parameter being stored, and ALIGN is the alignment required by the
|
|
parameter, which will affect how memory is allocated out of MEMORY. */
|
|
|
|
static void
|
|
riscv_assign_stack_location (struct riscv_arg_info::location *loc,
|
|
struct riscv_memory_offsets *memory,
|
|
int length, int align)
|
|
{
|
|
loc->loc_type = riscv_arg_info::location::on_stack;
|
|
memory->arg_offset
|
|
= align_up (memory->arg_offset, align);
|
|
loc->loc_data.offset = memory->arg_offset;
|
|
memory->arg_offset += length;
|
|
loc->c_length = length;
|
|
|
|
/* Offset is always 0, either we're the first location part, in which
|
|
case we're reading content from the start of the argument, or we're
|
|
passing the address of a reference argument, so 0. */
|
|
loc->c_offset = 0;
|
|
}
|
|
|
|
/* Update AINFO, which describes an argument that should be passed or
|
|
returned using the integer ABI. The argloc fields within AINFO are
|
|
updated to describe the location in which the argument will be passed to
|
|
a function, or returned from a function.
|
|
|
|
The CINFO structure contains the ongoing call information, the holds
|
|
information such as which argument registers are remaining to be
|
|
assigned to parameter, and how much memory has been used by parameters
|
|
so far.
|
|
|
|
By examining the state of CINFO a suitable location can be selected,
|
|
and assigned to AINFO. */
|
|
|
|
static void
|
|
riscv_call_arg_scalar_int (struct riscv_arg_info *ainfo,
|
|
struct riscv_call_info *cinfo)
|
|
{
|
|
if (ainfo->length > (2 * cinfo->xlen))
|
|
{
|
|
/* Argument is going to be passed by reference. */
|
|
ainfo->argloc[0].loc_type
|
|
= riscv_arg_info::location::by_ref;
|
|
cinfo->memory.ref_offset
|
|
= align_up (cinfo->memory.ref_offset, ainfo->align);
|
|
ainfo->argloc[0].loc_data.offset = cinfo->memory.ref_offset;
|
|
cinfo->memory.ref_offset += ainfo->length;
|
|
ainfo->argloc[0].c_length = ainfo->length;
|
|
|
|
/* The second location for this argument is given over to holding the
|
|
address of the by-reference data. Pass 0 for the offset as this
|
|
is not part of the actual argument value. */
|
|
if (!riscv_assign_reg_location (&ainfo->argloc[1],
|
|
&cinfo->int_regs,
|
|
cinfo->xlen, 0))
|
|
riscv_assign_stack_location (&ainfo->argloc[1],
|
|
&cinfo->memory, cinfo->xlen,
|
|
cinfo->xlen);
|
|
}
|
|
else
|
|
{
|
|
int len = std::min (ainfo->length, cinfo->xlen);
|
|
int align = std::max (ainfo->align, cinfo->xlen);
|
|
|
|
/* Unnamed arguments in registers that require 2*XLEN alignment are
|
|
passed in an aligned register pair. */
|
|
if (ainfo->is_unnamed && (align == cinfo->xlen * 2)
|
|
&& cinfo->int_regs.next_regnum & 1)
|
|
cinfo->int_regs.next_regnum++;
|
|
|
|
if (!riscv_assign_reg_location (&ainfo->argloc[0],
|
|
&cinfo->int_regs, len, 0))
|
|
riscv_assign_stack_location (&ainfo->argloc[0],
|
|
&cinfo->memory, len, align);
|
|
|
|
if (len < ainfo->length)
|
|
{
|
|
len = ainfo->length - len;
|
|
if (!riscv_assign_reg_location (&ainfo->argloc[1],
|
|
&cinfo->int_regs, len,
|
|
cinfo->xlen))
|
|
riscv_assign_stack_location (&ainfo->argloc[1],
|
|
&cinfo->memory, len, cinfo->xlen);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Like RISCV_CALL_ARG_SCALAR_INT, except the argument described by AINFO
|
|
is being passed with the floating point ABI. */
|
|
|
|
static void
|
|
riscv_call_arg_scalar_float (struct riscv_arg_info *ainfo,
|
|
struct riscv_call_info *cinfo)
|
|
{
|
|
if (ainfo->length > cinfo->flen || ainfo->is_unnamed)
|
|
return riscv_call_arg_scalar_int (ainfo, cinfo);
|
|
else
|
|
{
|
|
if (!riscv_assign_reg_location (&ainfo->argloc[0],
|
|
&cinfo->float_regs,
|
|
ainfo->length, 0))
|
|
return riscv_call_arg_scalar_int (ainfo, cinfo);
|
|
}
|
|
}
|
|
|
|
/* Like RISCV_CALL_ARG_SCALAR_INT, except the argument described by AINFO
|
|
is a complex floating point argument, and is therefore handled
|
|
differently to other argument types. */
|
|
|
|
static void
|
|
riscv_call_arg_complex_float (struct riscv_arg_info *ainfo,
|
|
struct riscv_call_info *cinfo)
|
|
{
|
|
if (ainfo->length <= (2 * cinfo->flen)
|
|
&& riscv_arg_regs_available (&cinfo->float_regs) >= 2
|
|
&& !ainfo->is_unnamed)
|
|
{
|
|
bool result;
|
|
int len = ainfo->length / 2;
|
|
|
|
result = riscv_assign_reg_location (&ainfo->argloc[0],
|
|
&cinfo->float_regs, len, 0);
|
|
gdb_assert (result);
|
|
|
|
result = riscv_assign_reg_location (&ainfo->argloc[1],
|
|
&cinfo->float_regs, len, len);
|
|
gdb_assert (result);
|
|
}
|
|
else
|
|
return riscv_call_arg_scalar_int (ainfo, cinfo);
|
|
}
|
|
|
|
/* A structure used for holding information about a structure type within
|
|
the inferior program. The RiscV ABI has special rules for handling some
|
|
structures with a single field or with two fields. The counting of
|
|
fields here is done after flattening out all nested structures. */
|
|
|
|
class riscv_struct_info
|
|
{
|
|
public:
|
|
riscv_struct_info ()
|
|
: m_number_of_fields (0),
|
|
m_types { nullptr, nullptr },
|
|
m_offsets { 0, 0 }
|
|
{
|
|
/* Nothing. */
|
|
}
|
|
|
|
/* Analyse TYPE descending into nested structures, count the number of
|
|
scalar fields and record the types of the first two fields found. */
|
|
void analyse (struct type *type)
|
|
{
|
|
analyse_inner (type, 0);
|
|
}
|
|
|
|
/* The number of scalar fields found in the analysed type. This is
|
|
currently only accurate if the value returned is 0, 1, or 2 as the
|
|
analysis stops counting when the number of fields is 3. This is
|
|
because the RiscV ABI only has special cases for 1 or 2 fields,
|
|
anything else we just don't care about. */
|
|
int number_of_fields () const
|
|
{ return m_number_of_fields; }
|
|
|
|
/* Return the type for scalar field INDEX within the analysed type. Will
|
|
return nullptr if there is no field at that index. Only INDEX values
|
|
0 and 1 can be requested as the RiscV ABI only has special cases for
|
|
structures with 1 or 2 fields. */
|
|
struct type *field_type (int index) const
|
|
{
|
|
gdb_assert (index < (sizeof (m_types) / sizeof (m_types[0])));
|
|
return m_types[index];
|
|
}
|
|
|
|
/* Return the offset of scalar field INDEX within the analysed type. Will
|
|
return 0 if there is no field at that index. Only INDEX values 0 and
|
|
1 can be requested as the RiscV ABI only has special cases for
|
|
structures with 1 or 2 fields. */
|
|
int field_offset (int index) const
|
|
{
|
|
gdb_assert (index < (sizeof (m_offsets) / sizeof (m_offsets[0])));
|
|
return m_offsets[index];
|
|
}
|
|
|
|
private:
|
|
/* The number of scalar fields found within the structure after recursing
|
|
into nested structures. */
|
|
int m_number_of_fields;
|
|
|
|
/* The types of the first two scalar fields found within the structure
|
|
after recursing into nested structures. */
|
|
struct type *m_types[2];
|
|
|
|
/* The offsets of the first two scalar fields found within the structure
|
|
after recursing into nested structures. */
|
|
int m_offsets[2];
|
|
|
|
/* Recursive core for ANALYSE, the OFFSET parameter tracks the byte
|
|
offset from the start of the top level structure being analysed. */
|
|
void analyse_inner (struct type *type, int offset);
|
|
};
|
|
|
|
/* See description in class declaration. */
|
|
|
|
void
|
|
riscv_struct_info::analyse_inner (struct type *type, int offset)
|
|
{
|
|
unsigned int count = type->num_fields ();
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < count; ++i)
|
|
{
|
|
if (TYPE_FIELD_LOC_KIND (type, i) != FIELD_LOC_KIND_BITPOS)
|
|
continue;
|
|
|
|
struct type *field_type = type->field (i).type ();
|
|
field_type = check_typedef (field_type);
|
|
int field_offset
|
|
= offset + TYPE_FIELD_BITPOS (type, i) / TARGET_CHAR_BIT;
|
|
|
|
switch (field_type->code ())
|
|
{
|
|
case TYPE_CODE_STRUCT:
|
|
analyse_inner (field_type, field_offset);
|
|
break;
|
|
|
|
default:
|
|
/* RiscV only flattens out structures. Anything else does not
|
|
need to be flattened, we just record the type, and when we
|
|
look at the analysis results we'll realise this is not a
|
|
structure we can special case, and pass the structure in
|
|
memory. */
|
|
if (m_number_of_fields < 2)
|
|
{
|
|
m_types[m_number_of_fields] = field_type;
|
|
m_offsets[m_number_of_fields] = field_offset;
|
|
}
|
|
m_number_of_fields++;
|
|
break;
|
|
}
|
|
|
|
/* RiscV only has special handling for structures with 1 or 2 scalar
|
|
fields, any more than that and the structure is just passed in
|
|
memory. We can safely drop out early when we find 3 or more
|
|
fields then. */
|
|
|
|
if (m_number_of_fields > 2)
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Like RISCV_CALL_ARG_SCALAR_INT, except the argument described by AINFO
|
|
is a structure. Small structures on RiscV have some special case
|
|
handling in order that the structure might be passed in register.
|
|
Larger structures are passed in memory. After assigning location
|
|
information to AINFO, CINFO will have been updated. */
|
|
|
|
static void
|
|
riscv_call_arg_struct (struct riscv_arg_info *ainfo,
|
|
struct riscv_call_info *cinfo)
|
|
{
|
|
if (riscv_arg_regs_available (&cinfo->float_regs) >= 1)
|
|
{
|
|
struct riscv_struct_info sinfo;
|
|
|
|
sinfo.analyse (ainfo->type);
|
|
if (sinfo.number_of_fields () == 1
|
|
&& sinfo.field_type(0)->code () == TYPE_CODE_COMPLEX)
|
|
{
|
|
/* The following is similar to RISCV_CALL_ARG_COMPLEX_FLOAT,
|
|
except we use the type of the complex field instead of the
|
|
type from AINFO, and the first location might be at a non-zero
|
|
offset. */
|
|
if (TYPE_LENGTH (sinfo.field_type (0)) <= (2 * cinfo->flen)
|
|
&& riscv_arg_regs_available (&cinfo->float_regs) >= 2
|
|
&& !ainfo->is_unnamed)
|
|
{
|
|
bool result;
|
|
int len = TYPE_LENGTH (sinfo.field_type (0)) / 2;
|
|
int offset = sinfo.field_offset (0);
|
|
|
|
result = riscv_assign_reg_location (&ainfo->argloc[0],
|
|
&cinfo->float_regs, len,
|
|
offset);
|
|
gdb_assert (result);
|
|
|
|
result = riscv_assign_reg_location (&ainfo->argloc[1],
|
|
&cinfo->float_regs, len,
|
|
(offset + len));
|
|
gdb_assert (result);
|
|
}
|
|
else
|
|
riscv_call_arg_scalar_int (ainfo, cinfo);
|
|
return;
|
|
}
|
|
|
|
if (sinfo.number_of_fields () == 1
|
|
&& sinfo.field_type(0)->code () == TYPE_CODE_FLT)
|
|
{
|
|
/* The following is similar to RISCV_CALL_ARG_SCALAR_FLOAT,
|
|
except we use the type of the first scalar field instead of
|
|
the type from AINFO. Also the location might be at a non-zero
|
|
offset. */
|
|
if (TYPE_LENGTH (sinfo.field_type (0)) > cinfo->flen
|
|
|| ainfo->is_unnamed)
|
|
riscv_call_arg_scalar_int (ainfo, cinfo);
|
|
else
|
|
{
|
|
int offset = sinfo.field_offset (0);
|
|
int len = TYPE_LENGTH (sinfo.field_type (0));
|
|
|
|
if (!riscv_assign_reg_location (&ainfo->argloc[0],
|
|
&cinfo->float_regs,
|
|
len, offset))
|
|
riscv_call_arg_scalar_int (ainfo, cinfo);
|
|
}
|
|
return;
|
|
}
|
|
|
|
if (sinfo.number_of_fields () == 2
|
|
&& sinfo.field_type(0)->code () == TYPE_CODE_FLT
|
|
&& TYPE_LENGTH (sinfo.field_type (0)) <= cinfo->flen
|
|
&& sinfo.field_type(1)->code () == TYPE_CODE_FLT
|
|
&& TYPE_LENGTH (sinfo.field_type (1)) <= cinfo->flen
|
|
&& riscv_arg_regs_available (&cinfo->float_regs) >= 2)
|
|
{
|
|
int len0 = TYPE_LENGTH (sinfo.field_type (0));
|
|
int offset = sinfo.field_offset (0);
|
|
if (!riscv_assign_reg_location (&ainfo->argloc[0],
|
|
&cinfo->float_regs, len0, offset))
|
|
error (_("failed during argument setup"));
|
|
|
|
int len1 = TYPE_LENGTH (sinfo.field_type (1));
|
|
offset = sinfo.field_offset (1);
|
|
gdb_assert (len1 <= (TYPE_LENGTH (ainfo->type)
|
|
- TYPE_LENGTH (sinfo.field_type (0))));
|
|
|
|
if (!riscv_assign_reg_location (&ainfo->argloc[1],
|
|
&cinfo->float_regs,
|
|
len1, offset))
|
|
error (_("failed during argument setup"));
|
|
return;
|
|
}
|
|
|
|
if (sinfo.number_of_fields () == 2
|
|
&& riscv_arg_regs_available (&cinfo->int_regs) >= 1
|
|
&& (sinfo.field_type(0)->code () == TYPE_CODE_FLT
|
|
&& TYPE_LENGTH (sinfo.field_type (0)) <= cinfo->flen
|
|
&& is_integral_type (sinfo.field_type (1))
|
|
&& TYPE_LENGTH (sinfo.field_type (1)) <= cinfo->xlen))
|
|
{
|
|
int len0 = TYPE_LENGTH (sinfo.field_type (0));
|
|
int offset = sinfo.field_offset (0);
|
|
if (!riscv_assign_reg_location (&ainfo->argloc[0],
|
|
&cinfo->float_regs, len0, offset))
|
|
error (_("failed during argument setup"));
|
|
|
|
int len1 = TYPE_LENGTH (sinfo.field_type (1));
|
|
offset = sinfo.field_offset (1);
|
|
gdb_assert (len1 <= cinfo->xlen);
|
|
if (!riscv_assign_reg_location (&ainfo->argloc[1],
|
|
&cinfo->int_regs, len1, offset))
|
|
error (_("failed during argument setup"));
|
|
return;
|
|
}
|
|
|
|
if (sinfo.number_of_fields () == 2
|
|
&& riscv_arg_regs_available (&cinfo->int_regs) >= 1
|
|
&& (is_integral_type (sinfo.field_type (0))
|
|
&& TYPE_LENGTH (sinfo.field_type (0)) <= cinfo->xlen
|
|
&& sinfo.field_type(1)->code () == TYPE_CODE_FLT
|
|
&& TYPE_LENGTH (sinfo.field_type (1)) <= cinfo->flen))
|
|
{
|
|
int len0 = TYPE_LENGTH (sinfo.field_type (0));
|
|
int len1 = TYPE_LENGTH (sinfo.field_type (1));
|
|
|
|
gdb_assert (len0 <= cinfo->xlen);
|
|
gdb_assert (len1 <= cinfo->flen);
|
|
|
|
int offset = sinfo.field_offset (0);
|
|
if (!riscv_assign_reg_location (&ainfo->argloc[0],
|
|
&cinfo->int_regs, len0, offset))
|
|
error (_("failed during argument setup"));
|
|
|
|
offset = sinfo.field_offset (1);
|
|
if (!riscv_assign_reg_location (&ainfo->argloc[1],
|
|
&cinfo->float_regs,
|
|
len1, offset))
|
|
error (_("failed during argument setup"));
|
|
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Non of the structure flattening cases apply, so we just pass using
|
|
the integer ABI. */
|
|
riscv_call_arg_scalar_int (ainfo, cinfo);
|
|
}
|
|
|
|
/* Assign a location to call (or return) argument AINFO, the location is
|
|
selected from CINFO which holds information about what call argument
|
|
locations are available for use next. The TYPE is the type of the
|
|
argument being passed, this information is recorded into AINFO (along
|
|
with some additional information derived from the type). IS_UNNAMED
|
|
is true if this is an unnamed (stdarg) argument, this info is also
|
|
recorded into AINFO.
|
|
|
|
After assigning a location to AINFO, CINFO will have been updated. */
|
|
|
|
static void
|
|
riscv_arg_location (struct gdbarch *gdbarch,
|
|
struct riscv_arg_info *ainfo,
|
|
struct riscv_call_info *cinfo,
|
|
struct type *type, bool is_unnamed)
|
|
{
|
|
ainfo->type = type;
|
|
ainfo->length = TYPE_LENGTH (ainfo->type);
|
|
ainfo->align = type_align (ainfo->type);
|
|
ainfo->is_unnamed = is_unnamed;
|
|
ainfo->contents = nullptr;
|
|
ainfo->argloc[0].c_length = 0;
|
|
ainfo->argloc[1].c_length = 0;
|
|
|
|
switch (ainfo->type->code ())
|
|
{
|
|
case TYPE_CODE_INT:
|
|
case TYPE_CODE_BOOL:
|
|
case TYPE_CODE_CHAR:
|
|
case TYPE_CODE_RANGE:
|
|
case TYPE_CODE_ENUM:
|
|
case TYPE_CODE_PTR:
|
|
if (ainfo->length <= cinfo->xlen)
|
|
{
|
|
ainfo->type = builtin_type (gdbarch)->builtin_long;
|
|
ainfo->length = cinfo->xlen;
|
|
}
|
|
else if (ainfo->length <= (2 * cinfo->xlen))
|
|
{
|
|
ainfo->type = builtin_type (gdbarch)->builtin_long_long;
|
|
ainfo->length = 2 * cinfo->xlen;
|
|
}
|
|
|
|
/* Recalculate the alignment requirement. */
|
|
ainfo->align = type_align (ainfo->type);
|
|
riscv_call_arg_scalar_int (ainfo, cinfo);
|
|
break;
|
|
|
|
case TYPE_CODE_FLT:
|
|
riscv_call_arg_scalar_float (ainfo, cinfo);
|
|
break;
|
|
|
|
case TYPE_CODE_COMPLEX:
|
|
riscv_call_arg_complex_float (ainfo, cinfo);
|
|
break;
|
|
|
|
case TYPE_CODE_STRUCT:
|
|
riscv_call_arg_struct (ainfo, cinfo);
|
|
break;
|
|
|
|
default:
|
|
riscv_call_arg_scalar_int (ainfo, cinfo);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Used for printing debug information about the call argument location in
|
|
INFO to STREAM. The addresses in SP_REFS and SP_ARGS are the base
|
|
addresses for the location of pass-by-reference and
|
|
arguments-on-the-stack memory areas. */
|
|
|
|
static void
|
|
riscv_print_arg_location (ui_file *stream, struct gdbarch *gdbarch,
|
|
struct riscv_arg_info *info,
|
|
CORE_ADDR sp_refs, CORE_ADDR sp_args)
|
|
{
|
|
fprintf_unfiltered (stream, "type: '%s', length: 0x%x, alignment: 0x%x",
|
|
TYPE_SAFE_NAME (info->type), info->length, info->align);
|
|
switch (info->argloc[0].loc_type)
|
|
{
|
|
case riscv_arg_info::location::in_reg:
|
|
fprintf_unfiltered
|
|
(stream, ", register %s",
|
|
gdbarch_register_name (gdbarch, info->argloc[0].loc_data.regno));
|
|
if (info->argloc[0].c_length < info->length)
|
|
{
|
|
switch (info->argloc[1].loc_type)
|
|
{
|
|
case riscv_arg_info::location::in_reg:
|
|
fprintf_unfiltered
|
|
(stream, ", register %s",
|
|
gdbarch_register_name (gdbarch,
|
|
info->argloc[1].loc_data.regno));
|
|
break;
|
|
|
|
case riscv_arg_info::location::on_stack:
|
|
fprintf_unfiltered (stream, ", on stack at offset 0x%x",
|
|
info->argloc[1].loc_data.offset);
|
|
break;
|
|
|
|
case riscv_arg_info::location::by_ref:
|
|
default:
|
|
/* The second location should never be a reference, any
|
|
argument being passed by reference just places its address
|
|
in the first location and is done. */
|
|
error (_("invalid argument location"));
|
|
break;
|
|
}
|
|
|
|
if (info->argloc[1].c_offset > info->argloc[0].c_length)
|
|
fprintf_unfiltered (stream, " (offset 0x%x)",
|
|
info->argloc[1].c_offset);
|
|
}
|
|
break;
|
|
|
|
case riscv_arg_info::location::on_stack:
|
|
fprintf_unfiltered (stream, ", on stack at offset 0x%x",
|
|
info->argloc[0].loc_data.offset);
|
|
break;
|
|
|
|
case riscv_arg_info::location::by_ref:
|
|
fprintf_unfiltered
|
|
(stream, ", by reference, data at offset 0x%x (%s)",
|
|
info->argloc[0].loc_data.offset,
|
|
core_addr_to_string (sp_refs + info->argloc[0].loc_data.offset));
|
|
if (info->argloc[1].loc_type
|
|
== riscv_arg_info::location::in_reg)
|
|
fprintf_unfiltered
|
|
(stream, ", address in register %s",
|
|
gdbarch_register_name (gdbarch, info->argloc[1].loc_data.regno));
|
|
else
|
|
{
|
|
gdb_assert (info->argloc[1].loc_type
|
|
== riscv_arg_info::location::on_stack);
|
|
fprintf_unfiltered
|
|
(stream, ", address on stack at offset 0x%x (%s)",
|
|
info->argloc[1].loc_data.offset,
|
|
core_addr_to_string (sp_args + info->argloc[1].loc_data.offset));
|
|
}
|
|
break;
|
|
|
|
default:
|
|
gdb_assert_not_reached (_("unknown argument location type"));
|
|
}
|
|
}
|
|
|
|
/* Wrapper around REGCACHE->cooked_write. Places the LEN bytes of DATA
|
|
into a buffer that is at least as big as the register REGNUM, padding
|
|
out the DATA with either 0x00, or 0xff. For floating point registers
|
|
0xff is used, for everyone else 0x00 is used. */
|
|
|
|
static void
|
|
riscv_regcache_cooked_write (int regnum, const gdb_byte *data, int len,
|
|
struct regcache *regcache, int flen)
|
|
{
|
|
gdb_byte tmp [sizeof (ULONGEST)];
|
|
|
|
/* FP values in FP registers must be NaN-boxed. */
|
|
if (riscv_is_fp_regno_p (regnum) && len < flen)
|
|
memset (tmp, -1, sizeof (tmp));
|
|
else
|
|
memset (tmp, 0, sizeof (tmp));
|
|
memcpy (tmp, data, len);
|
|
regcache->cooked_write (regnum, tmp);
|
|
}
|
|
|
|
/* Implement the push dummy call gdbarch callback. */
|
|
|
|
static CORE_ADDR
|
|
riscv_push_dummy_call (struct gdbarch *gdbarch,
|
|
struct value *function,
|
|
struct regcache *regcache,
|
|
CORE_ADDR bp_addr,
|
|
int nargs,
|
|
struct value **args,
|
|
CORE_ADDR sp,
|
|
function_call_return_method return_method,
|
|
CORE_ADDR struct_addr)
|
|
{
|
|
int i;
|
|
CORE_ADDR sp_args, sp_refs;
|
|
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
|
|
|
struct riscv_arg_info *arg_info =
|
|
(struct riscv_arg_info *) alloca (nargs * sizeof (struct riscv_arg_info));
|
|
|
|
struct riscv_call_info call_info (gdbarch);
|
|
|
|
CORE_ADDR osp = sp;
|
|
|
|
struct type *ftype = check_typedef (value_type (function));
|
|
|
|
if (ftype->code () == TYPE_CODE_PTR)
|
|
ftype = check_typedef (TYPE_TARGET_TYPE (ftype));
|
|
|
|
/* We'll use register $a0 if we're returning a struct. */
|
|
if (return_method == return_method_struct)
|
|
++call_info.int_regs.next_regnum;
|
|
|
|
for (i = 0; i < nargs; ++i)
|
|
{
|
|
struct value *arg_value;
|
|
struct type *arg_type;
|
|
struct riscv_arg_info *info = &arg_info[i];
|
|
|
|
arg_value = args[i];
|
|
arg_type = check_typedef (value_type (arg_value));
|
|
|
|
riscv_arg_location (gdbarch, info, &call_info, arg_type,
|
|
ftype->has_varargs () && i >= ftype->num_fields ());
|
|
|
|
if (info->type != arg_type)
|
|
arg_value = value_cast (info->type, arg_value);
|
|
info->contents = value_contents (arg_value);
|
|
}
|
|
|
|
/* Adjust the stack pointer and align it. */
|
|
sp = sp_refs = align_down (sp - call_info.memory.ref_offset, SP_ALIGNMENT);
|
|
sp = sp_args = align_down (sp - call_info.memory.arg_offset, SP_ALIGNMENT);
|
|
|
|
if (riscv_debug_infcall > 0)
|
|
{
|
|
fprintf_unfiltered (gdb_stdlog, "dummy call args:\n");
|
|
fprintf_unfiltered (gdb_stdlog, ": floating point ABI %s in use\n",
|
|
(riscv_has_fp_abi (gdbarch) ? "is" : "is not"));
|
|
fprintf_unfiltered (gdb_stdlog, ": xlen: %d\n: flen: %d\n",
|
|
call_info.xlen, call_info.flen);
|
|
if (return_method == return_method_struct)
|
|
fprintf_unfiltered (gdb_stdlog,
|
|
"[*] struct return pointer in register $A0\n");
|
|
for (i = 0; i < nargs; ++i)
|
|
{
|
|
struct riscv_arg_info *info = &arg_info [i];
|
|
|
|
fprintf_unfiltered (gdb_stdlog, "[%2d] ", i);
|
|
riscv_print_arg_location (gdb_stdlog, gdbarch, info, sp_refs, sp_args);
|
|
fprintf_unfiltered (gdb_stdlog, "\n");
|
|
}
|
|
if (call_info.memory.arg_offset > 0
|
|
|| call_info.memory.ref_offset > 0)
|
|
{
|
|
fprintf_unfiltered (gdb_stdlog, " Original sp: %s\n",
|
|
core_addr_to_string (osp));
|
|
fprintf_unfiltered (gdb_stdlog, "Stack required (for args): 0x%x\n",
|
|
call_info.memory.arg_offset);
|
|
fprintf_unfiltered (gdb_stdlog, "Stack required (for refs): 0x%x\n",
|
|
call_info.memory.ref_offset);
|
|
fprintf_unfiltered (gdb_stdlog, " Stack allocated: %s\n",
|
|
core_addr_to_string_nz (osp - sp));
|
|
}
|
|
}
|
|
|
|
/* Now load the argument into registers, or onto the stack. */
|
|
|
|
if (return_method == return_method_struct)
|
|
{
|
|
gdb_byte buf[sizeof (LONGEST)];
|
|
|
|
store_unsigned_integer (buf, call_info.xlen, byte_order, struct_addr);
|
|
regcache->cooked_write (RISCV_A0_REGNUM, buf);
|
|
}
|
|
|
|
for (i = 0; i < nargs; ++i)
|
|
{
|
|
CORE_ADDR dst;
|
|
int second_arg_length = 0;
|
|
const gdb_byte *second_arg_data;
|
|
struct riscv_arg_info *info = &arg_info [i];
|
|
|
|
gdb_assert (info->length > 0);
|
|
|
|
switch (info->argloc[0].loc_type)
|
|
{
|
|
case riscv_arg_info::location::in_reg:
|
|
{
|
|
gdb_assert (info->argloc[0].c_length <= info->length);
|
|
|
|
riscv_regcache_cooked_write (info->argloc[0].loc_data.regno,
|
|
(info->contents
|
|
+ info->argloc[0].c_offset),
|
|
info->argloc[0].c_length,
|
|
regcache, call_info.flen);
|
|
second_arg_length =
|
|
(((info->argloc[0].c_length + info->argloc[0].c_offset) < info->length)
|
|
? info->argloc[1].c_length : 0);
|
|
second_arg_data = info->contents + info->argloc[1].c_offset;
|
|
}
|
|
break;
|
|
|
|
case riscv_arg_info::location::on_stack:
|
|
dst = sp_args + info->argloc[0].loc_data.offset;
|
|
write_memory (dst, info->contents, info->length);
|
|
second_arg_length = 0;
|
|
break;
|
|
|
|
case riscv_arg_info::location::by_ref:
|
|
dst = sp_refs + info->argloc[0].loc_data.offset;
|
|
write_memory (dst, info->contents, info->length);
|
|
|
|
second_arg_length = call_info.xlen;
|
|
second_arg_data = (gdb_byte *) &dst;
|
|
break;
|
|
|
|
default:
|
|
gdb_assert_not_reached (_("unknown argument location type"));
|
|
}
|
|
|
|
if (second_arg_length > 0)
|
|
{
|
|
switch (info->argloc[1].loc_type)
|
|
{
|
|
case riscv_arg_info::location::in_reg:
|
|
{
|
|
gdb_assert ((riscv_is_fp_regno_p (info->argloc[1].loc_data.regno)
|
|
&& second_arg_length <= call_info.flen)
|
|
|| second_arg_length <= call_info.xlen);
|
|
riscv_regcache_cooked_write (info->argloc[1].loc_data.regno,
|
|
second_arg_data,
|
|
second_arg_length,
|
|
regcache, call_info.flen);
|
|
}
|
|
break;
|
|
|
|
case riscv_arg_info::location::on_stack:
|
|
{
|
|
CORE_ADDR arg_addr;
|
|
|
|
arg_addr = sp_args + info->argloc[1].loc_data.offset;
|
|
write_memory (arg_addr, second_arg_data, second_arg_length);
|
|
break;
|
|
}
|
|
|
|
case riscv_arg_info::location::by_ref:
|
|
default:
|
|
/* The second location should never be a reference, any
|
|
argument being passed by reference just places its address
|
|
in the first location and is done. */
|
|
error (_("invalid argument location"));
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Set the dummy return value to bp_addr.
|
|
A dummy breakpoint will be setup to execute the call. */
|
|
|
|
if (riscv_debug_infcall > 0)
|
|
fprintf_unfiltered (gdb_stdlog, ": writing $ra = %s\n",
|
|
core_addr_to_string (bp_addr));
|
|
regcache_cooked_write_unsigned (regcache, RISCV_RA_REGNUM, bp_addr);
|
|
|
|
/* Finally, update the stack pointer. */
|
|
|
|
if (riscv_debug_infcall > 0)
|
|
fprintf_unfiltered (gdb_stdlog, ": writing $sp = %s\n",
|
|
core_addr_to_string (sp));
|
|
regcache_cooked_write_unsigned (regcache, RISCV_SP_REGNUM, sp);
|
|
|
|
return sp;
|
|
}
|
|
|
|
/* Implement the return_value gdbarch method. */
|
|
|
|
static enum return_value_convention
|
|
riscv_return_value (struct gdbarch *gdbarch,
|
|
struct value *function,
|
|
struct type *type,
|
|
struct regcache *regcache,
|
|
gdb_byte *readbuf,
|
|
const gdb_byte *writebuf)
|
|
{
|
|
struct riscv_call_info call_info (gdbarch);
|
|
struct riscv_arg_info info;
|
|
struct type *arg_type;
|
|
|
|
arg_type = check_typedef (type);
|
|
riscv_arg_location (gdbarch, &info, &call_info, arg_type, false);
|
|
|
|
if (riscv_debug_infcall > 0)
|
|
{
|
|
fprintf_unfiltered (gdb_stdlog, "riscv return value:\n");
|
|
fprintf_unfiltered (gdb_stdlog, "[R] ");
|
|
riscv_print_arg_location (gdb_stdlog, gdbarch, &info, 0, 0);
|
|
fprintf_unfiltered (gdb_stdlog, "\n");
|
|
}
|
|
|
|
if (readbuf != nullptr || writebuf != nullptr)
|
|
{
|
|
unsigned int arg_len;
|
|
struct value *abi_val;
|
|
gdb_byte *old_readbuf = nullptr;
|
|
int regnum;
|
|
|
|
/* We only do one thing at a time. */
|
|
gdb_assert (readbuf == nullptr || writebuf == nullptr);
|
|
|
|
/* In some cases the argument is not returned as the declared type,
|
|
and we need to cast to or from the ABI type in order to
|
|
correctly access the argument. When writing to the machine we
|
|
do the cast here, when reading from the machine the cast occurs
|
|
later, after extracting the value. As the ABI type can be
|
|
larger than the declared type, then the read or write buffers
|
|
passed in might be too small. Here we ensure that we are using
|
|
buffers of sufficient size. */
|
|
if (writebuf != nullptr)
|
|
{
|
|
struct value *arg_val = value_from_contents (arg_type, writebuf);
|
|
abi_val = value_cast (info.type, arg_val);
|
|
writebuf = value_contents_raw (abi_val);
|
|
}
|
|
else
|
|
{
|
|
abi_val = allocate_value (info.type);
|
|
old_readbuf = readbuf;
|
|
readbuf = value_contents_raw (abi_val);
|
|
}
|
|
arg_len = TYPE_LENGTH (info.type);
|
|
|
|
switch (info.argloc[0].loc_type)
|
|
{
|
|
/* Return value in register(s). */
|
|
case riscv_arg_info::location::in_reg:
|
|
{
|
|
regnum = info.argloc[0].loc_data.regno;
|
|
gdb_assert (info.argloc[0].c_length <= arg_len);
|
|
gdb_assert (info.argloc[0].c_length
|
|
<= register_size (gdbarch, regnum));
|
|
|
|
if (readbuf)
|
|
{
|
|
gdb_byte *ptr = readbuf + info.argloc[0].c_offset;
|
|
regcache->cooked_read_part (regnum, 0,
|
|
info.argloc[0].c_length,
|
|
ptr);
|
|
}
|
|
|
|
if (writebuf)
|
|
{
|
|
const gdb_byte *ptr = writebuf + info.argloc[0].c_offset;
|
|
riscv_regcache_cooked_write (regnum, ptr,
|
|
info.argloc[0].c_length,
|
|
regcache, call_info.flen);
|
|
}
|
|
|
|
/* A return value in register can have a second part in a
|
|
second register. */
|
|
if (info.argloc[1].c_length > 0)
|
|
{
|
|
switch (info.argloc[1].loc_type)
|
|
{
|
|
case riscv_arg_info::location::in_reg:
|
|
regnum = info.argloc[1].loc_data.regno;
|
|
|
|
gdb_assert ((info.argloc[0].c_length
|
|
+ info.argloc[1].c_length) <= arg_len);
|
|
gdb_assert (info.argloc[1].c_length
|
|
<= register_size (gdbarch, regnum));
|
|
|
|
if (readbuf)
|
|
{
|
|
readbuf += info.argloc[1].c_offset;
|
|
regcache->cooked_read_part (regnum, 0,
|
|
info.argloc[1].c_length,
|
|
readbuf);
|
|
}
|
|
|
|
if (writebuf)
|
|
{
|
|
const gdb_byte *ptr
|
|
= writebuf + info.argloc[1].c_offset;
|
|
riscv_regcache_cooked_write
|
|
(regnum, ptr, info.argloc[1].c_length,
|
|
regcache, call_info.flen);
|
|
}
|
|
break;
|
|
|
|
case riscv_arg_info::location::by_ref:
|
|
case riscv_arg_info::location::on_stack:
|
|
default:
|
|
error (_("invalid argument location"));
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
break;
|
|
|
|
/* Return value by reference will have its address in A0. */
|
|
case riscv_arg_info::location::by_ref:
|
|
{
|
|
ULONGEST addr;
|
|
|
|
regcache_cooked_read_unsigned (regcache, RISCV_A0_REGNUM,
|
|
&addr);
|
|
if (readbuf != nullptr)
|
|
read_memory (addr, readbuf, info.length);
|
|
if (writebuf != nullptr)
|
|
write_memory (addr, writebuf, info.length);
|
|
}
|
|
break;
|
|
|
|
case riscv_arg_info::location::on_stack:
|
|
default:
|
|
error (_("invalid argument location"));
|
|
break;
|
|
}
|
|
|
|
/* This completes the cast from abi type back to the declared type
|
|
in the case that we are reading from the machine. See the
|
|
comment at the head of this block for more details. */
|
|
if (readbuf != nullptr)
|
|
{
|
|
struct value *arg_val = value_cast (arg_type, abi_val);
|
|
memcpy (old_readbuf, value_contents_raw (arg_val),
|
|
TYPE_LENGTH (arg_type));
|
|
}
|
|
}
|
|
|
|
switch (info.argloc[0].loc_type)
|
|
{
|
|
case riscv_arg_info::location::in_reg:
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
case riscv_arg_info::location::by_ref:
|
|
return RETURN_VALUE_ABI_RETURNS_ADDRESS;
|
|
case riscv_arg_info::location::on_stack:
|
|
default:
|
|
error (_("invalid argument location"));
|
|
}
|
|
}
|
|
|
|
/* Implement the frame_align gdbarch method. */
|
|
|
|
static CORE_ADDR
|
|
riscv_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr)
|
|
{
|
|
return align_down (addr, 16);
|
|
}
|
|
|
|
/* Generate, or return the cached frame cache for the RiscV frame
|
|
unwinder. */
|
|
|
|
static struct riscv_unwind_cache *
|
|
riscv_frame_cache (struct frame_info *this_frame, void **this_cache)
|
|
{
|
|
CORE_ADDR pc, start_addr;
|
|
struct riscv_unwind_cache *cache;
|
|
struct gdbarch *gdbarch = get_frame_arch (this_frame);
|
|
int numregs, regno;
|
|
|
|
if ((*this_cache) != NULL)
|
|
return (struct riscv_unwind_cache *) *this_cache;
|
|
|
|
cache = FRAME_OBSTACK_ZALLOC (struct riscv_unwind_cache);
|
|
cache->regs = trad_frame_alloc_saved_regs (this_frame);
|
|
(*this_cache) = cache;
|
|
|
|
/* Scan the prologue, filling in the cache. */
|
|
start_addr = get_frame_func (this_frame);
|
|
pc = get_frame_pc (this_frame);
|
|
riscv_scan_prologue (gdbarch, start_addr, pc, cache);
|
|
|
|
/* We can now calculate the frame base address. */
|
|
cache->frame_base
|
|
= (get_frame_register_signed (this_frame, cache->frame_base_reg)
|
|
+ cache->frame_base_offset);
|
|
if (riscv_debug_unwinder)
|
|
fprintf_unfiltered (gdb_stdlog, "Frame base is %s ($%s + 0x%x)\n",
|
|
core_addr_to_string (cache->frame_base),
|
|
gdbarch_register_name (gdbarch,
|
|
cache->frame_base_reg),
|
|
cache->frame_base_offset);
|
|
|
|
/* The prologue scanner sets the address of registers stored to the stack
|
|
as the offset of that register from the frame base. The prologue
|
|
scanner doesn't know the actual frame base value, and so is unable to
|
|
compute the exact address. We do now know the frame base value, so
|
|
update the address of registers stored to the stack. */
|
|
numregs = gdbarch_num_regs (gdbarch) + gdbarch_num_pseudo_regs (gdbarch);
|
|
for (regno = 0; regno < numregs; ++regno)
|
|
{
|
|
if (trad_frame_addr_p (cache->regs, regno))
|
|
cache->regs[regno].addr += cache->frame_base;
|
|
}
|
|
|
|
/* The previous $pc can be found wherever the $ra value can be found.
|
|
The previous $ra value is gone, this would have been stored be the
|
|
previous frame if required. */
|
|
cache->regs[gdbarch_pc_regnum (gdbarch)] = cache->regs[RISCV_RA_REGNUM];
|
|
trad_frame_set_unknown (cache->regs, RISCV_RA_REGNUM);
|
|
|
|
/* Build the frame id. */
|
|
cache->this_id = frame_id_build (cache->frame_base, start_addr);
|
|
|
|
/* The previous $sp value is the frame base value. */
|
|
trad_frame_set_value (cache->regs, gdbarch_sp_regnum (gdbarch),
|
|
cache->frame_base);
|
|
|
|
return cache;
|
|
}
|
|
|
|
/* Implement the this_id callback for RiscV frame unwinder. */
|
|
|
|
static void
|
|
riscv_frame_this_id (struct frame_info *this_frame,
|
|
void **prologue_cache,
|
|
struct frame_id *this_id)
|
|
{
|
|
struct riscv_unwind_cache *cache;
|
|
|
|
try
|
|
{
|
|
cache = riscv_frame_cache (this_frame, prologue_cache);
|
|
*this_id = cache->this_id;
|
|
}
|
|
catch (const gdb_exception_error &ex)
|
|
{
|
|
/* Ignore errors, this leaves the frame id as the predefined outer
|
|
frame id which terminates the backtrace at this point. */
|
|
}
|
|
}
|
|
|
|
/* Implement the prev_register callback for RiscV frame unwinder. */
|
|
|
|
static struct value *
|
|
riscv_frame_prev_register (struct frame_info *this_frame,
|
|
void **prologue_cache,
|
|
int regnum)
|
|
{
|
|
struct riscv_unwind_cache *cache;
|
|
|
|
cache = riscv_frame_cache (this_frame, prologue_cache);
|
|
return trad_frame_get_prev_register (this_frame, cache->regs, regnum);
|
|
}
|
|
|
|
/* Structure defining the RiscV normal frame unwind functions. Since we
|
|
are the fallback unwinder (DWARF unwinder is used first), we use the
|
|
default frame sniffer, which always accepts the frame. */
|
|
|
|
static const struct frame_unwind riscv_frame_unwind =
|
|
{
|
|
/*.type =*/ NORMAL_FRAME,
|
|
/*.stop_reason =*/ default_frame_unwind_stop_reason,
|
|
/*.this_id =*/ riscv_frame_this_id,
|
|
/*.prev_register =*/ riscv_frame_prev_register,
|
|
/*.unwind_data =*/ NULL,
|
|
/*.sniffer =*/ default_frame_sniffer,
|
|
/*.dealloc_cache =*/ NULL,
|
|
/*.prev_arch =*/ NULL,
|
|
};
|
|
|
|
/* Extract a set of required target features out of INFO, specifically the
|
|
bfd being executed is examined to see what target features it requires.
|
|
IF there is no current bfd, or the bfd doesn't indicate any useful
|
|
features then a RISCV_GDBARCH_FEATURES is returned in its default state. */
|
|
|
|
static struct riscv_gdbarch_features
|
|
riscv_features_from_gdbarch_info (const struct gdbarch_info info)
|
|
{
|
|
struct riscv_gdbarch_features features;
|
|
|
|
/* Now try to improve on the defaults by looking at the binary we are
|
|
going to execute. We assume the user knows what they are doing and
|
|
that the target will match the binary. Remember, this code path is
|
|
only used at all if the target hasn't given us a description, so this
|
|
is really a last ditched effort to do something sane before giving
|
|
up. */
|
|
if (info.abfd != NULL
|
|
&& bfd_get_flavour (info.abfd) == bfd_target_elf_flavour)
|
|
{
|
|
unsigned char eclass = elf_elfheader (info.abfd)->e_ident[EI_CLASS];
|
|
int e_flags = elf_elfheader (info.abfd)->e_flags;
|
|
|
|
if (eclass == ELFCLASS32)
|
|
features.xlen = 4;
|
|
else if (eclass == ELFCLASS64)
|
|
features.xlen = 8;
|
|
else
|
|
internal_error (__FILE__, __LINE__,
|
|
_("unknown ELF header class %d"), eclass);
|
|
|
|
if (e_flags & EF_RISCV_FLOAT_ABI_DOUBLE)
|
|
features.flen = 8;
|
|
else if (e_flags & EF_RISCV_FLOAT_ABI_SINGLE)
|
|
features.flen = 4;
|
|
}
|
|
|
|
return features;
|
|
}
|
|
|
|
/* Find a suitable default target description. Use the contents of INFO,
|
|
specifically the bfd object being executed, to guide the selection of a
|
|
suitable default target description. */
|
|
|
|
static const struct target_desc *
|
|
riscv_find_default_target_description (const struct gdbarch_info info)
|
|
{
|
|
/* Extract desired feature set from INFO. */
|
|
struct riscv_gdbarch_features features
|
|
= riscv_features_from_gdbarch_info (info);
|
|
|
|
/* If the XLEN field is still 0 then we got nothing useful from INFO. In
|
|
this case we fall back to a minimal useful target, 8-byte x-registers,
|
|
with no floating point. */
|
|
if (features.xlen == 0)
|
|
features.xlen = 8;
|
|
|
|
/* Now build a target description based on the feature set. */
|
|
return riscv_lookup_target_description (features);
|
|
}
|
|
|
|
/* All of the registers in REG_SET are checked for in FEATURE, TDESC_DATA
|
|
is updated with the register numbers for each register as listed in
|
|
REG_SET. If any register marked as required in REG_SET is not found in
|
|
FEATURE then this function returns false, otherwise, it returns true. */
|
|
|
|
static bool
|
|
riscv_check_tdesc_feature (struct tdesc_arch_data *tdesc_data,
|
|
const struct tdesc_feature *main_feature,
|
|
const struct tdesc_feature *csr_feature,
|
|
const struct riscv_register_feature *reg_set,
|
|
std::vector<riscv_pending_register_alias> *aliases)
|
|
{
|
|
for (const auto ® : reg_set->registers)
|
|
{
|
|
bool found = reg.check (tdesc_data, main_feature, reg_set, aliases);
|
|
|
|
if (!found && reg.required != RISCV_REG_OPTIONAL)
|
|
{
|
|
if (reg.required == RISCV_REG_REQUIRED_MAYBE_CSR
|
|
&& csr_feature != nullptr)
|
|
{
|
|
gdb_assert (main_feature != csr_feature);
|
|
found = reg.check (tdesc_data, csr_feature, reg_set, aliases);
|
|
}
|
|
if (!found)
|
|
return false;
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
/* Add all the expected register sets into GDBARCH. */
|
|
|
|
static void
|
|
riscv_add_reggroups (struct gdbarch *gdbarch)
|
|
{
|
|
/* Add predefined register groups. */
|
|
reggroup_add (gdbarch, all_reggroup);
|
|
reggroup_add (gdbarch, save_reggroup);
|
|
reggroup_add (gdbarch, restore_reggroup);
|
|
reggroup_add (gdbarch, system_reggroup);
|
|
reggroup_add (gdbarch, vector_reggroup);
|
|
reggroup_add (gdbarch, general_reggroup);
|
|
reggroup_add (gdbarch, float_reggroup);
|
|
|
|
/* Add RISC-V specific register groups. */
|
|
reggroup_add (gdbarch, csr_reggroup);
|
|
}
|
|
|
|
/* Implement the "dwarf2_reg_to_regnum" gdbarch method. */
|
|
|
|
static int
|
|
riscv_dwarf_reg_to_regnum (struct gdbarch *gdbarch, int reg)
|
|
{
|
|
if (reg < RISCV_DWARF_REGNUM_X31)
|
|
return RISCV_ZERO_REGNUM + (reg - RISCV_DWARF_REGNUM_X0);
|
|
|
|
else if (reg < RISCV_DWARF_REGNUM_F31)
|
|
return RISCV_FIRST_FP_REGNUM + (reg - RISCV_DWARF_REGNUM_F0);
|
|
|
|
return -1;
|
|
}
|
|
|
|
/* Implement the gcc_target_options method. We have to select the arch and abi
|
|
from the feature info. We have enough feature info to select the abi, but
|
|
not enough info for the arch given all of the possible architecture
|
|
extensions. So choose reasonable defaults for now. */
|
|
|
|
static std::string
|
|
riscv_gcc_target_options (struct gdbarch *gdbarch)
|
|
{
|
|
int isa_xlen = riscv_isa_xlen (gdbarch);
|
|
int isa_flen = riscv_isa_flen (gdbarch);
|
|
int abi_xlen = riscv_abi_xlen (gdbarch);
|
|
int abi_flen = riscv_abi_flen (gdbarch);
|
|
std::string target_options;
|
|
|
|
target_options = "-march=rv";
|
|
if (isa_xlen == 8)
|
|
target_options += "64";
|
|
else
|
|
target_options += "32";
|
|
if (isa_flen == 8)
|
|
target_options += "gc";
|
|
else if (isa_flen == 4)
|
|
target_options += "imafc";
|
|
else
|
|
target_options += "imac";
|
|
|
|
target_options += " -mabi=";
|
|
if (abi_xlen == 8)
|
|
target_options += "lp64";
|
|
else
|
|
target_options += "ilp32";
|
|
if (abi_flen == 8)
|
|
target_options += "d";
|
|
else if (abi_flen == 4)
|
|
target_options += "f";
|
|
|
|
/* The gdb loader doesn't handle link-time relaxation relocations. */
|
|
target_options += " -mno-relax";
|
|
|
|
return target_options;
|
|
}
|
|
|
|
/* Call back from tdesc_use_registers, called for each unknown register
|
|
found in the target description.
|
|
|
|
See target-description.h (typedef tdesc_unknown_register_ftype) for a
|
|
discussion of the arguments and return values. */
|
|
|
|
static int
|
|
riscv_tdesc_unknown_reg (struct gdbarch *gdbarch, tdesc_feature *feature,
|
|
const char *reg_name, int possible_regnum)
|
|
{
|
|
/* At one point in time GDB had an incorrect default target description
|
|
that duplicated the fflags, frm, and fcsr registers in both the FPU
|
|
and CSR register sets.
|
|
|
|
Some targets (QEMU) copied these target descriptions into their source
|
|
tree, and so we're currently stuck working with some targets that
|
|
declare the same registers twice.
|
|
|
|
There's not much we can do about this any more. Assuming the target
|
|
will direct a request for either register number to the correct
|
|
underlying hardware register then it doesn't matter which one GDB
|
|
uses, so long as we (GDB) are consistent (so that we don't end up with
|
|
invalid cache misses).
|
|
|
|
As we always scan the FPU registers first, then the CSRs, if the
|
|
target has included the offending registers in both sets then we will
|
|
always see the FPU copies here, as the CSR versions will replace them
|
|
in the register list.
|
|
|
|
To prevent these duplicates showing up in any of the register list,
|
|
record their register numbers here. */
|
|
if (strcmp (tdesc_feature_name (feature), riscv_freg_feature.name) == 0)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
int *regnum_ptr = nullptr;
|
|
|
|
if (strcmp (reg_name, "fflags") == 0)
|
|
regnum_ptr = &tdep->duplicate_fflags_regnum;
|
|
else if (strcmp (reg_name, "frm") == 0)
|
|
regnum_ptr = &tdep->duplicate_frm_regnum;
|
|
else if (strcmp (reg_name, "fcsr") == 0)
|
|
regnum_ptr = &tdep->duplicate_fcsr_regnum;
|
|
|
|
if (regnum_ptr != nullptr)
|
|
{
|
|
/* This means the register appears more than twice in the target
|
|
description. Just let GDB add this as another register.
|
|
We'll have duplicates in the register name list, but there's
|
|
not much more we can do. */
|
|
if (*regnum_ptr != -1)
|
|
return -1;
|
|
|
|
/* Record the number assigned to this register, then return the
|
|
number (so it actually gets assigned to this register). */
|
|
*regnum_ptr = possible_regnum;
|
|
return possible_regnum;
|
|
}
|
|
}
|
|
|
|
/* Any unknown registers in the CSR feature are recorded within a single
|
|
block so we can easily identify these registers when making choices
|
|
about register groups in riscv_register_reggroup_p. */
|
|
if (strcmp (tdesc_feature_name (feature), riscv_csr_feature.name) == 0)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
if (tdep->unknown_csrs_first_regnum == -1)
|
|
tdep->unknown_csrs_first_regnum = possible_regnum;
|
|
gdb_assert (tdep->unknown_csrs_first_regnum
|
|
+ tdep->unknown_csrs_count == possible_regnum);
|
|
tdep->unknown_csrs_count++;
|
|
return possible_regnum;
|
|
}
|
|
|
|
/* Some other unknown register. Don't assign this a number now, it will
|
|
be assigned a number automatically later by the target description
|
|
handling code. */
|
|
return -1;
|
|
}
|
|
|
|
/* Implement the gnu_triplet_regexp method. A single compiler supports both
|
|
32-bit and 64-bit code, and may be named riscv32 or riscv64 or (not
|
|
recommended) riscv. */
|
|
|
|
static const char *
|
|
riscv_gnu_triplet_regexp (struct gdbarch *gdbarch)
|
|
{
|
|
return "riscv(32|64)?";
|
|
}
|
|
|
|
/* Initialize the current architecture based on INFO. If possible,
|
|
re-use an architecture from ARCHES, which is a list of
|
|
architectures already created during this debugging session.
|
|
|
|
Called e.g. at program startup, when reading a core file, and when
|
|
reading a binary file. */
|
|
|
|
static struct gdbarch *
|
|
riscv_gdbarch_init (struct gdbarch_info info,
|
|
struct gdbarch_list *arches)
|
|
{
|
|
struct gdbarch *gdbarch;
|
|
struct gdbarch_tdep *tdep;
|
|
struct riscv_gdbarch_features features;
|
|
const struct target_desc *tdesc = info.target_desc;
|
|
|
|
/* Ensure we always have a target description. */
|
|
if (!tdesc_has_registers (tdesc))
|
|
tdesc = riscv_find_default_target_description (info);
|
|
gdb_assert (tdesc);
|
|
|
|
if (riscv_debug_gdbarch)
|
|
fprintf_unfiltered (gdb_stdlog, "Have got a target description\n");
|
|
|
|
const struct tdesc_feature *feature_cpu
|
|
= tdesc_find_feature (tdesc, riscv_xreg_feature.name);
|
|
const struct tdesc_feature *feature_fpu
|
|
= tdesc_find_feature (tdesc, riscv_freg_feature.name);
|
|
const struct tdesc_feature *feature_virtual
|
|
= tdesc_find_feature (tdesc, riscv_virtual_feature.name);
|
|
const struct tdesc_feature *feature_csr
|
|
= tdesc_find_feature (tdesc, riscv_csr_feature.name);
|
|
|
|
if (feature_cpu == NULL)
|
|
return NULL;
|
|
|
|
tdesc_arch_data_up tdesc_data = tdesc_data_alloc ();
|
|
std::vector<riscv_pending_register_alias> pending_aliases;
|
|
|
|
bool valid_p = riscv_check_tdesc_feature (tdesc_data.get (),
|
|
feature_cpu, feature_csr,
|
|
&riscv_xreg_feature,
|
|
&pending_aliases);
|
|
if (valid_p)
|
|
{
|
|
/* Check that all of the core cpu registers have the same bitsize. */
|
|
int xlen_bitsize = tdesc_register_bitsize (feature_cpu, "pc");
|
|
|
|
for (auto &tdesc_reg : feature_cpu->registers)
|
|
valid_p &= (tdesc_reg->bitsize == xlen_bitsize);
|
|
|
|
if (riscv_debug_gdbarch)
|
|
fprintf_filtered
|
|
(gdb_stdlog,
|
|
"From target-description, xlen = %d\n", xlen_bitsize);
|
|
|
|
features.xlen = (xlen_bitsize / 8);
|
|
}
|
|
|
|
if (feature_fpu != NULL)
|
|
{
|
|
valid_p &= riscv_check_tdesc_feature (tdesc_data.get (), feature_fpu,
|
|
feature_csr,
|
|
&riscv_freg_feature,
|
|
&pending_aliases);
|
|
|
|
/* Search for the first floating point register (by any alias), to
|
|
determine the bitsize. */
|
|
int bitsize = -1;
|
|
const auto &fp0 = riscv_freg_feature.registers[0];
|
|
|
|
for (const char *name : fp0.names)
|
|
{
|
|
if (tdesc_unnumbered_register (feature_fpu, name))
|
|
{
|
|
bitsize = tdesc_register_bitsize (feature_fpu, name);
|
|
break;
|
|
}
|
|
}
|
|
|
|
gdb_assert (bitsize != -1);
|
|
features.flen = (bitsize / 8);
|
|
|
|
if (riscv_debug_gdbarch)
|
|
fprintf_filtered
|
|
(gdb_stdlog,
|
|
"From target-description, flen = %d\n", bitsize);
|
|
}
|
|
else
|
|
{
|
|
features.flen = 0;
|
|
|
|
if (riscv_debug_gdbarch)
|
|
fprintf_filtered
|
|
(gdb_stdlog,
|
|
"No FPU in target-description, assume soft-float ABI\n");
|
|
}
|
|
|
|
if (feature_virtual)
|
|
riscv_check_tdesc_feature (tdesc_data.get (), feature_virtual, feature_csr,
|
|
&riscv_virtual_feature,
|
|
&pending_aliases);
|
|
|
|
if (feature_csr)
|
|
riscv_check_tdesc_feature (tdesc_data.get (), feature_csr, nullptr,
|
|
&riscv_csr_feature,
|
|
&pending_aliases);
|
|
|
|
if (!valid_p)
|
|
{
|
|
if (riscv_debug_gdbarch)
|
|
fprintf_unfiltered (gdb_stdlog, "Target description is not valid\n");
|
|
return NULL;
|
|
}
|
|
|
|
/* Have a look at what the supplied (if any) bfd object requires of the
|
|
target, then check that this matches with what the target is
|
|
providing. */
|
|
struct riscv_gdbarch_features abi_features
|
|
= riscv_features_from_gdbarch_info (info);
|
|
/* In theory a binary compiled for RV32 could run on an RV64 target,
|
|
however, this has not been tested in GDB yet, so for now we require
|
|
that the requested xlen match the targets xlen. */
|
|
if (abi_features.xlen != 0 && abi_features.xlen != features.xlen)
|
|
error (_("bfd requires xlen %d, but target has xlen %d"),
|
|
abi_features.xlen, features.xlen);
|
|
/* We do support running binaries compiled for 32-bit float on targets
|
|
with 64-bit float, so we only complain if the binary requires more
|
|
than the target has available. */
|
|
if (abi_features.flen > features.flen)
|
|
error (_("bfd requires flen %d, but target has flen %d"),
|
|
abi_features.flen, features.flen);
|
|
|
|
/* If the ABI_FEATURES xlen is 0 then this indicates we got no useful abi
|
|
features from the INFO object. In this case we assume that the xlen
|
|
abi matches the hardware. */
|
|
if (abi_features.xlen == 0)
|
|
abi_features.xlen = features.xlen;
|
|
|
|
/* Find a candidate among the list of pre-declared architectures. */
|
|
for (arches = gdbarch_list_lookup_by_info (arches, &info);
|
|
arches != NULL;
|
|
arches = gdbarch_list_lookup_by_info (arches->next, &info))
|
|
{
|
|
/* Check that the feature set of the ARCHES matches the feature set
|
|
we are looking for. If it doesn't then we can't reuse this
|
|
gdbarch. */
|
|
struct gdbarch_tdep *other_tdep = gdbarch_tdep (arches->gdbarch);
|
|
|
|
if (other_tdep->isa_features != features
|
|
|| other_tdep->abi_features != abi_features)
|
|
continue;
|
|
|
|
break;
|
|
}
|
|
|
|
if (arches != NULL)
|
|
return arches->gdbarch;
|
|
|
|
/* None found, so create a new architecture from the information provided. */
|
|
tdep = new (struct gdbarch_tdep);
|
|
gdbarch = gdbarch_alloc (&info, tdep);
|
|
tdep->isa_features = features;
|
|
tdep->abi_features = abi_features;
|
|
|
|
/* Target data types. */
|
|
set_gdbarch_short_bit (gdbarch, 16);
|
|
set_gdbarch_int_bit (gdbarch, 32);
|
|
set_gdbarch_long_bit (gdbarch, riscv_isa_xlen (gdbarch) * 8);
|
|
set_gdbarch_long_long_bit (gdbarch, 64);
|
|
set_gdbarch_float_bit (gdbarch, 32);
|
|
set_gdbarch_double_bit (gdbarch, 64);
|
|
set_gdbarch_long_double_bit (gdbarch, 128);
|
|
set_gdbarch_long_double_format (gdbarch, floatformats_ia64_quad);
|
|
set_gdbarch_ptr_bit (gdbarch, riscv_isa_xlen (gdbarch) * 8);
|
|
set_gdbarch_char_signed (gdbarch, 0);
|
|
set_gdbarch_type_align (gdbarch, riscv_type_align);
|
|
|
|
/* Information about the target architecture. */
|
|
set_gdbarch_return_value (gdbarch, riscv_return_value);
|
|
set_gdbarch_breakpoint_kind_from_pc (gdbarch, riscv_breakpoint_kind_from_pc);
|
|
set_gdbarch_sw_breakpoint_from_kind (gdbarch, riscv_sw_breakpoint_from_kind);
|
|
set_gdbarch_have_nonsteppable_watchpoint (gdbarch, 1);
|
|
|
|
/* Functions to analyze frames. */
|
|
set_gdbarch_skip_prologue (gdbarch, riscv_skip_prologue);
|
|
set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
|
|
set_gdbarch_frame_align (gdbarch, riscv_frame_align);
|
|
|
|
/* Functions handling dummy frames. */
|
|
set_gdbarch_call_dummy_location (gdbarch, ON_STACK);
|
|
set_gdbarch_push_dummy_code (gdbarch, riscv_push_dummy_code);
|
|
set_gdbarch_push_dummy_call (gdbarch, riscv_push_dummy_call);
|
|
|
|
/* Frame unwinders. Use DWARF debug info if available, otherwise use our own
|
|
unwinder. */
|
|
dwarf2_append_unwinders (gdbarch);
|
|
frame_unwind_append_unwinder (gdbarch, &riscv_frame_unwind);
|
|
|
|
/* Register architecture. */
|
|
riscv_add_reggroups (gdbarch);
|
|
|
|
/* Internal <-> external register number maps. */
|
|
set_gdbarch_dwarf2_reg_to_regnum (gdbarch, riscv_dwarf_reg_to_regnum);
|
|
|
|
/* We reserve all possible register numbers for the known registers.
|
|
This means the target description mechanism will add any target
|
|
specific registers after this number. This helps make debugging GDB
|
|
just a little easier. */
|
|
set_gdbarch_num_regs (gdbarch, RISCV_LAST_REGNUM + 1);
|
|
|
|
/* We don't have to provide the count of 0 here (its the default) but
|
|
include this line to make it explicit that, right now, we don't have
|
|
any pseudo registers on RISC-V. */
|
|
set_gdbarch_num_pseudo_regs (gdbarch, 0);
|
|
|
|
/* Some specific register numbers GDB likes to know about. */
|
|
set_gdbarch_sp_regnum (gdbarch, RISCV_SP_REGNUM);
|
|
set_gdbarch_pc_regnum (gdbarch, RISCV_PC_REGNUM);
|
|
|
|
set_gdbarch_print_registers_info (gdbarch, riscv_print_registers_info);
|
|
|
|
/* Finalise the target description registers. */
|
|
tdesc_use_registers (gdbarch, tdesc, std::move (tdesc_data),
|
|
riscv_tdesc_unknown_reg);
|
|
|
|
/* Override the register type callback setup by the target description
|
|
mechanism. This allows us to provide special type for floating point
|
|
registers. */
|
|
set_gdbarch_register_type (gdbarch, riscv_register_type);
|
|
|
|
/* Override the register name callback setup by the target description
|
|
mechanism. This allows us to force our preferred names for the
|
|
registers, no matter what the target description called them. */
|
|
set_gdbarch_register_name (gdbarch, riscv_register_name);
|
|
|
|
/* Override the register group callback setup by the target description
|
|
mechanism. This allows us to force registers into the groups we
|
|
want, ignoring what the target tells us. */
|
|
set_gdbarch_register_reggroup_p (gdbarch, riscv_register_reggroup_p);
|
|
|
|
/* Create register aliases for alternative register names. We only
|
|
create aliases for registers which were mentioned in the target
|
|
description. */
|
|
for (const auto &alias : pending_aliases)
|
|
alias.create (gdbarch);
|
|
|
|
/* Compile command hooks. */
|
|
set_gdbarch_gcc_target_options (gdbarch, riscv_gcc_target_options);
|
|
set_gdbarch_gnu_triplet_regexp (gdbarch, riscv_gnu_triplet_regexp);
|
|
|
|
/* Hook in OS ABI-specific overrides, if they have been registered. */
|
|
gdbarch_init_osabi (info, gdbarch);
|
|
|
|
register_riscv_ravenscar_ops (gdbarch);
|
|
|
|
return gdbarch;
|
|
}
|
|
|
|
/* This decodes the current instruction and determines the address of the
|
|
next instruction. */
|
|
|
|
static CORE_ADDR
|
|
riscv_next_pc (struct regcache *regcache, CORE_ADDR pc)
|
|
{
|
|
struct gdbarch *gdbarch = regcache->arch ();
|
|
struct riscv_insn insn;
|
|
CORE_ADDR next_pc;
|
|
|
|
insn.decode (gdbarch, pc);
|
|
next_pc = pc + insn.length ();
|
|
|
|
if (insn.opcode () == riscv_insn::JAL)
|
|
next_pc = pc + insn.imm_signed ();
|
|
else if (insn.opcode () == riscv_insn::JALR)
|
|
{
|
|
LONGEST source;
|
|
regcache->cooked_read (insn.rs1 (), &source);
|
|
next_pc = (source + insn.imm_signed ()) & ~(CORE_ADDR) 0x1;
|
|
}
|
|
else if (insn.opcode () == riscv_insn::BEQ)
|
|
{
|
|
LONGEST src1, src2;
|
|
regcache->cooked_read (insn.rs1 (), &src1);
|
|
regcache->cooked_read (insn.rs2 (), &src2);
|
|
if (src1 == src2)
|
|
next_pc = pc + insn.imm_signed ();
|
|
}
|
|
else if (insn.opcode () == riscv_insn::BNE)
|
|
{
|
|
LONGEST src1, src2;
|
|
regcache->cooked_read (insn.rs1 (), &src1);
|
|
regcache->cooked_read (insn.rs2 (), &src2);
|
|
if (src1 != src2)
|
|
next_pc = pc + insn.imm_signed ();
|
|
}
|
|
else if (insn.opcode () == riscv_insn::BLT)
|
|
{
|
|
LONGEST src1, src2;
|
|
regcache->cooked_read (insn.rs1 (), &src1);
|
|
regcache->cooked_read (insn.rs2 (), &src2);
|
|
if (src1 < src2)
|
|
next_pc = pc + insn.imm_signed ();
|
|
}
|
|
else if (insn.opcode () == riscv_insn::BGE)
|
|
{
|
|
LONGEST src1, src2;
|
|
regcache->cooked_read (insn.rs1 (), &src1);
|
|
regcache->cooked_read (insn.rs2 (), &src2);
|
|
if (src1 >= src2)
|
|
next_pc = pc + insn.imm_signed ();
|
|
}
|
|
else if (insn.opcode () == riscv_insn::BLTU)
|
|
{
|
|
ULONGEST src1, src2;
|
|
regcache->cooked_read (insn.rs1 (), &src1);
|
|
regcache->cooked_read (insn.rs2 (), &src2);
|
|
if (src1 < src2)
|
|
next_pc = pc + insn.imm_signed ();
|
|
}
|
|
else if (insn.opcode () == riscv_insn::BGEU)
|
|
{
|
|
ULONGEST src1, src2;
|
|
regcache->cooked_read (insn.rs1 (), &src1);
|
|
regcache->cooked_read (insn.rs2 (), &src2);
|
|
if (src1 >= src2)
|
|
next_pc = pc + insn.imm_signed ();
|
|
}
|
|
|
|
return next_pc;
|
|
}
|
|
|
|
/* We can't put a breakpoint in the middle of a lr/sc atomic sequence, so look
|
|
for the end of the sequence and put the breakpoint there. */
|
|
|
|
static bool
|
|
riscv_next_pc_atomic_sequence (struct regcache *regcache, CORE_ADDR pc,
|
|
CORE_ADDR *next_pc)
|
|
{
|
|
struct gdbarch *gdbarch = regcache->arch ();
|
|
struct riscv_insn insn;
|
|
CORE_ADDR cur_step_pc = pc;
|
|
CORE_ADDR last_addr = 0;
|
|
|
|
/* First instruction has to be a load reserved. */
|
|
insn.decode (gdbarch, cur_step_pc);
|
|
if (insn.opcode () != riscv_insn::LR)
|
|
return false;
|
|
cur_step_pc = cur_step_pc + insn.length ();
|
|
|
|
/* Next instruction should be branch to exit. */
|
|
insn.decode (gdbarch, cur_step_pc);
|
|
if (insn.opcode () != riscv_insn::BNE)
|
|
return false;
|
|
last_addr = cur_step_pc + insn.imm_signed ();
|
|
cur_step_pc = cur_step_pc + insn.length ();
|
|
|
|
/* Next instruction should be store conditional. */
|
|
insn.decode (gdbarch, cur_step_pc);
|
|
if (insn.opcode () != riscv_insn::SC)
|
|
return false;
|
|
cur_step_pc = cur_step_pc + insn.length ();
|
|
|
|
/* Next instruction should be branch to start. */
|
|
insn.decode (gdbarch, cur_step_pc);
|
|
if (insn.opcode () != riscv_insn::BNE)
|
|
return false;
|
|
if (pc != (cur_step_pc + insn.imm_signed ()))
|
|
return false;
|
|
cur_step_pc = cur_step_pc + insn.length ();
|
|
|
|
/* We should now be at the end of the sequence. */
|
|
if (cur_step_pc != last_addr)
|
|
return false;
|
|
|
|
*next_pc = cur_step_pc;
|
|
return true;
|
|
}
|
|
|
|
/* This is called just before we want to resume the inferior, if we want to
|
|
single-step it but there is no hardware or kernel single-step support. We
|
|
find the target of the coming instruction and breakpoint it. */
|
|
|
|
std::vector<CORE_ADDR>
|
|
riscv_software_single_step (struct regcache *regcache)
|
|
{
|
|
CORE_ADDR pc, next_pc;
|
|
|
|
pc = regcache_read_pc (regcache);
|
|
|
|
if (riscv_next_pc_atomic_sequence (regcache, pc, &next_pc))
|
|
return {next_pc};
|
|
|
|
next_pc = riscv_next_pc (regcache, pc);
|
|
|
|
return {next_pc};
|
|
}
|
|
|
|
/* Create RISC-V specific reggroups. */
|
|
|
|
static void
|
|
riscv_init_reggroups ()
|
|
{
|
|
csr_reggroup = reggroup_new ("csr", USER_REGGROUP);
|
|
}
|
|
|
|
void _initialize_riscv_tdep ();
|
|
void
|
|
_initialize_riscv_tdep ()
|
|
{
|
|
riscv_create_csr_aliases ();
|
|
riscv_init_reggroups ();
|
|
|
|
gdbarch_register (bfd_arch_riscv, riscv_gdbarch_init, NULL);
|
|
|
|
/* Add root prefix command for all "set debug riscv" and "show debug
|
|
riscv" commands. */
|
|
add_basic_prefix_cmd ("riscv", no_class,
|
|
_("RISC-V specific debug commands."),
|
|
&setdebugriscvcmdlist, "set debug riscv ", 0,
|
|
&setdebuglist);
|
|
|
|
add_show_prefix_cmd ("riscv", no_class,
|
|
_("RISC-V specific debug commands."),
|
|
&showdebugriscvcmdlist, "show debug riscv ", 0,
|
|
&showdebuglist);
|
|
|
|
add_setshow_zuinteger_cmd ("breakpoints", class_maintenance,
|
|
&riscv_debug_breakpoints, _("\
|
|
Set riscv breakpoint debugging."), _("\
|
|
Show riscv breakpoint debugging."), _("\
|
|
When non-zero, print debugging information for the riscv specific parts\n\
|
|
of the breakpoint mechanism."),
|
|
NULL,
|
|
show_riscv_debug_variable,
|
|
&setdebugriscvcmdlist, &showdebugriscvcmdlist);
|
|
|
|
add_setshow_zuinteger_cmd ("infcall", class_maintenance,
|
|
&riscv_debug_infcall, _("\
|
|
Set riscv inferior call debugging."), _("\
|
|
Show riscv inferior call debugging."), _("\
|
|
When non-zero, print debugging information for the riscv specific parts\n\
|
|
of the inferior call mechanism."),
|
|
NULL,
|
|
show_riscv_debug_variable,
|
|
&setdebugriscvcmdlist, &showdebugriscvcmdlist);
|
|
|
|
add_setshow_zuinteger_cmd ("unwinder", class_maintenance,
|
|
&riscv_debug_unwinder, _("\
|
|
Set riscv stack unwinding debugging."), _("\
|
|
Show riscv stack unwinding debugging."), _("\
|
|
When non-zero, print debugging information for the riscv specific parts\n\
|
|
of the stack unwinding mechanism."),
|
|
NULL,
|
|
show_riscv_debug_variable,
|
|
&setdebugriscvcmdlist, &showdebugriscvcmdlist);
|
|
|
|
add_setshow_zuinteger_cmd ("gdbarch", class_maintenance,
|
|
&riscv_debug_gdbarch, _("\
|
|
Set riscv gdbarch initialisation debugging."), _("\
|
|
Show riscv gdbarch initialisation debugging."), _("\
|
|
When non-zero, print debugging information for the riscv gdbarch\n\
|
|
initialisation process."),
|
|
NULL,
|
|
show_riscv_debug_variable,
|
|
&setdebugriscvcmdlist, &showdebugriscvcmdlist);
|
|
|
|
/* Add root prefix command for all "set riscv" and "show riscv" commands. */
|
|
add_basic_prefix_cmd ("riscv", no_class,
|
|
_("RISC-V specific commands."),
|
|
&setriscvcmdlist, "set riscv ", 0, &setlist);
|
|
|
|
add_show_prefix_cmd ("riscv", no_class,
|
|
_("RISC-V specific commands."),
|
|
&showriscvcmdlist, "show riscv ", 0, &showlist);
|
|
|
|
|
|
use_compressed_breakpoints = AUTO_BOOLEAN_AUTO;
|
|
add_setshow_auto_boolean_cmd ("use-compressed-breakpoints", no_class,
|
|
&use_compressed_breakpoints,
|
|
_("\
|
|
Set debugger's use of compressed breakpoints."), _(" \
|
|
Show debugger's use of compressed breakpoints."), _("\
|
|
Debugging compressed code requires compressed breakpoints to be used. If\n\
|
|
left to 'auto' then gdb will use them if the existing instruction is a\n\
|
|
compressed instruction. If that doesn't give the correct behavior, then\n\
|
|
this option can be used."),
|
|
NULL,
|
|
show_use_compressed_breakpoints,
|
|
&setriscvcmdlist,
|
|
&showriscvcmdlist);
|
|
}
|