binutils-gdb/gdb/lynx-nat.c
Stu Grossman d87d7b10af * configure.in: Add Lynx/rs6000 support.
* lynx-nat.c:  Clean up some Sparc stuff.  Clean up ptrace error
	messages.  Add rs6000 support.  Don't try to modify unwritable
	registers.
	* rs6000-nat.c:  Move lots of native dependent stuff (like core
	file support) from rs6000-tdep.c & xcoffexec.c to here.
	* rs6000-tdep.c:  Move native dependent stuff to nat.c.
	* xcoffexec.c:  Move native dependent stuff to nat.c.
	* config/rs6000/nm-rs6000.h:  Move defs of SOLIB_* macros to here
	from tm	file.
	* config/rs6000/tm-rs6000.h:  Remove defs of SOLIB_* funcs, cuz they're
	really native.
	* config/rs6000/tm-rs6000lynx.h, config/rs6000/xm-rs6000lynx.h:
	New files to support Lynx/rs6000.
1994-02-12 01:08:29 +00:00

625 lines
15 KiB
C

/* Native-dependent code for LynxOS.
Copyright 1993, 1994 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
#include "defs.h"
#include "frame.h"
#include "inferior.h"
#include "target.h"
#include <sys/ptrace.h>
#include <sys/wait.h>
#include <sys/fpp.h>
static unsigned long registers_addr PARAMS ((int pid));
#define X(ENTRY)(offsetof(struct econtext, ENTRY))
#ifdef I386
/* Mappings from tm-i386v.h */
static int regmap[] =
{
X(eax),
X(ecx),
X(edx),
X(ebx),
X(esp), /* sp */
X(ebp), /* fp */
X(esi),
X(edi),
X(eip), /* pc */
X(flags), /* ps */
X(cs),
X(ss),
X(ds),
X(es),
X(ecode), /* Lynx doesn't give us either fs or gs, so */
X(fault), /* we just substitute these two in the hopes
that they are useful. */
};
#endif
#ifdef M68K
/* Mappings from tm-m68k.h */
static int regmap[] =
{
X(regs[0]), /* d0 */
X(regs[1]), /* d1 */
X(regs[2]), /* d2 */
X(regs[3]), /* d3 */
X(regs[4]), /* d4 */
X(regs[5]), /* d5 */
X(regs[6]), /* d6 */
X(regs[7]), /* d7 */
X(regs[8]), /* a0 */
X(regs[9]), /* a1 */
X(regs[10]), /* a2 */
X(regs[11]), /* a3 */
X(regs[12]), /* a4 */
X(regs[13]), /* a5 */
X(regs[14]), /* fp */
offsetof (st_t, usp) - offsetof (st_t, ec), /* sp */
X(status), /* ps */
X(pc),
X(fregs[0*3]), /* fp0 */
X(fregs[1*3]), /* fp1 */
X(fregs[2*3]), /* fp2 */
X(fregs[3*3]), /* fp3 */
X(fregs[4*3]), /* fp4 */
X(fregs[5*3]), /* fp5 */
X(fregs[6*3]), /* fp6 */
X(fregs[7*3]), /* fp7 */
X(fcregs[0]), /* fpcontrol */
X(fcregs[1]), /* fpstatus */
X(fcregs[2]), /* fpiaddr */
X(ssw), /* fpcode */
X(fault), /* fpflags */
};
#endif
#ifdef rs6000
static int regmap[] =
{
X(iregs[0]), /* r0 */
X(iregs[1]),
X(iregs[2]),
X(iregs[3]),
X(iregs[4]),
X(iregs[5]),
X(iregs[6]),
X(iregs[7]),
X(iregs[8]),
X(iregs[9]),
X(iregs[10]),
X(iregs[11]),
X(iregs[12]),
X(iregs[13]),
X(iregs[14]),
X(iregs[15]),
X(iregs[16]),
X(iregs[17]),
X(iregs[18]),
X(iregs[19]),
X(iregs[20]),
X(iregs[21]),
X(iregs[22]),
X(iregs[23]),
X(iregs[24]),
X(iregs[25]),
X(iregs[26]),
X(iregs[27]),
X(iregs[28]),
X(iregs[29]),
X(iregs[30]),
X(iregs[31]),
X(fregs[0]), /* f0 */
X(fregs[1]),
X(fregs[2]),
X(fregs[3]),
X(fregs[4]),
X(fregs[5]),
X(fregs[6]),
X(fregs[7]),
X(fregs[8]),
X(fregs[9]),
X(fregs[10]),
X(fregs[11]),
X(fregs[12]),
X(fregs[13]),
X(fregs[14]),
X(fregs[15]),
X(fregs[16]),
X(fregs[17]),
X(fregs[18]),
X(fregs[19]),
X(fregs[20]),
X(fregs[21]),
X(fregs[22]),
X(fregs[23]),
X(fregs[24]),
X(fregs[25]),
X(fregs[26]),
X(fregs[27]),
X(fregs[28]),
X(fregs[29]),
X(fregs[30]),
X(fregs[31]),
X(srr0), /* IAR (PC) */
X(srr1), /* MSR (PS) */
X(cr), /* CR */
X(lr), /* LR */
X(ctr), /* CTR */
X(xer), /* XER */
X(mq) /* MQ */
};
#endif /* rs6000 */
#ifdef SPARC
/* This routine handles some oddball cases for Sparc registers and LynxOS.
In partucular, it causes refs to G0, g5->7, and all fp regs to return zero.
It also handles knows where to find the I & L regs on the stack. */
void
fetch_inferior_registers (regno)
int regno;
{
int whatregs = 0;
#define WHATREGS_FLOAT 1
#define WHATREGS_GEN 2
#define WHATREGS_STACK 4
if (regno == -1)
whatregs = WHATREGS_FLOAT | WHATREGS_GEN | WHATREGS_STACK;
else if (regno >= L0_REGNUM && regno <= I7_REGNUM)
whatregs = WHATREGS_STACK;
else if (regno >= FP0_REGNUM && regno < FP0_REGNUM + 32)
whatregs = WHATREGS_FLOAT;
else
whatregs = WHATREGS_GEN;
if (whatregs & WHATREGS_GEN)
{
struct econtext ec; /* general regs */
char buf[MAX_REGISTER_RAW_SIZE];
int retval;
int i;
errno = 0;
retval = ptrace (PTRACE_GETREGS, inferior_pid, (PTRACE_ARG3_TYPE) &ec,
0);
if (errno)
perror_with_name ("ptrace(PTRACE_GETREGS)");
memset (buf, 0, REGISTER_RAW_SIZE (G0_REGNUM));
supply_register (G0_REGNUM, buf);
supply_register (TBR_REGNUM, (char *)&ec.tbr);
memcpy (&registers[REGISTER_BYTE (G1_REGNUM)], &ec.g1,
4 * REGISTER_RAW_SIZE (G1_REGNUM));
for (i = G1_REGNUM; i <= G1_REGNUM + 3; i++)
register_valid[i] = 1;
supply_register (PS_REGNUM, (char *)&ec.psr);
supply_register (Y_REGNUM, (char *)&ec.y);
supply_register (PC_REGNUM, (char *)&ec.pc);
supply_register (NPC_REGNUM, (char *)&ec.npc);
supply_register (WIM_REGNUM, (char *)&ec.wim);
memcpy (&registers[REGISTER_BYTE (O0_REGNUM)], ec.o,
8 * REGISTER_RAW_SIZE (O0_REGNUM));
for (i = O0_REGNUM; i <= O0_REGNUM + 7; i++)
register_valid[i] = 1;
}
if (whatregs & WHATREGS_STACK)
{
CORE_ADDR sp;
int i;
sp = read_register (SP_REGNUM);
target_xfer_memory (sp + FRAME_SAVED_I0,
&registers[REGISTER_BYTE(I0_REGNUM)],
8 * REGISTER_RAW_SIZE (I0_REGNUM), 0);
for (i = I0_REGNUM; i <= I7_REGNUM; i++)
register_valid[i] = 1;
target_xfer_memory (sp + FRAME_SAVED_L0,
&registers[REGISTER_BYTE(L0_REGNUM)],
8 * REGISTER_RAW_SIZE (L0_REGNUM), 0);
for (i = L0_REGNUM; i <= L0_REGNUM + 7; i++)
register_valid[i] = 1;
}
if (whatregs & WHATREGS_FLOAT)
{
struct fcontext fc; /* fp regs */
int retval;
int i;
errno = 0;
retval = ptrace (PTRACE_GETFPREGS, inferior_pid, (PTRACE_ARG3_TYPE) &fc,
0);
if (errno)
perror_with_name ("ptrace(PTRACE_GETFPREGS)");
memcpy (&registers[REGISTER_BYTE (FP0_REGNUM)], fc.f.fregs,
32 * REGISTER_RAW_SIZE (FP0_REGNUM));
for (i = FP0_REGNUM; i <= FP0_REGNUM + 31; i++)
register_valid[i] = 1;
supply_register (FPS_REGNUM, (char *)&fc.fsr);
}
}
/* This routine handles storing of the I & L regs for the Sparc. The trick
here is that they actually live on the stack. The really tricky part is
that when changing the stack pointer, the I & L regs must be written to
where the new SP points, otherwise the regs will be incorrect when the
process is started up again. We assume that the I & L regs are valid at
this point. */
void
store_inferior_registers (regno)
int regno;
{
int whatregs = 0;
if (regno == -1)
whatregs = WHATREGS_FLOAT | WHATREGS_GEN | WHATREGS_STACK;
else if (regno >= L0_REGNUM && regno <= I7_REGNUM)
whatregs = WHATREGS_STACK;
else if (regno >= FP0_REGNUM && regno < FP0_REGNUM + 32)
whatregs = WHATREGS_FLOAT;
else if (regno == SP_REGNUM)
whatregs = WHATREGS_STACK | WHATREGS_GEN;
else
whatregs = WHATREGS_GEN;
if (whatregs & WHATREGS_GEN)
{
struct econtext ec; /* general regs */
int retval;
ec.tbr = read_register (TBR_REGNUM);
memcpy (&ec.g1, &registers[REGISTER_BYTE (G1_REGNUM)],
4 * REGISTER_RAW_SIZE (G1_REGNUM));
ec.psr = read_register (PS_REGNUM);
ec.y = read_register (Y_REGNUM);
ec.pc = read_register (PC_REGNUM);
ec.npc = read_register (NPC_REGNUM);
ec.wim = read_register (WIM_REGNUM);
memcpy (ec.o, &registers[REGISTER_BYTE (O0_REGNUM)],
8 * REGISTER_RAW_SIZE (O0_REGNUM));
errno = 0;
retval = ptrace (PTRACE_SETREGS, inferior_pid, (PTRACE_ARG3_TYPE) &ec,
0);
if (errno)
perror_with_name ("ptrace(PTRACE_SETREGS)");
}
if (whatregs & WHATREGS_STACK)
{
int regoffset;
CORE_ADDR sp;
sp = read_register (SP_REGNUM);
if (regno == -1 || regno == SP_REGNUM)
{
if (!register_valid[L0_REGNUM+5])
abort();
target_xfer_memory (sp + FRAME_SAVED_I0,
&registers[REGISTER_BYTE (I0_REGNUM)],
8 * REGISTER_RAW_SIZE (I0_REGNUM), 1);
target_xfer_memory (sp + FRAME_SAVED_L0,
&registers[REGISTER_BYTE (L0_REGNUM)],
8 * REGISTER_RAW_SIZE (L0_REGNUM), 1);
}
else if (regno >= L0_REGNUM && regno <= I7_REGNUM)
{
if (!register_valid[regno])
abort();
if (regno >= L0_REGNUM && regno <= L0_REGNUM + 7)
regoffset = REGISTER_BYTE (regno) - REGISTER_BYTE (L0_REGNUM)
+ FRAME_SAVED_L0;
else
regoffset = REGISTER_BYTE (regno) - REGISTER_BYTE (I0_REGNUM)
+ FRAME_SAVED_I0;
target_xfer_memory (sp + regoffset, &registers[REGISTER_BYTE (regno)],
REGISTER_RAW_SIZE (regno), 1);
}
}
if (whatregs & WHATREGS_FLOAT)
{
struct fcontext fc; /* fp regs */
int retval;
/* We read fcontext first so that we can get good values for fq_t... */
errno = 0;
retval = ptrace (PTRACE_GETFPREGS, inferior_pid, (PTRACE_ARG3_TYPE) &fc,
0);
if (errno)
perror_with_name ("ptrace(PTRACE_GETFPREGS)");
memcpy (fc.f.fregs, &registers[REGISTER_BYTE (FP0_REGNUM)],
32 * REGISTER_RAW_SIZE (FP0_REGNUM));
fc.fsr = read_register (FPS_REGNUM);
errno = 0;
retval = ptrace (PTRACE_SETFPREGS, inferior_pid, (PTRACE_ARG3_TYPE) &fc,
0);
if (errno)
perror_with_name ("ptrace(PTRACE_SETFPREGS)");
}
}
#endif /* SPARC */
#if defined (I386) || defined (M68K) || defined (rs6000)
/* Return the offset relative to the start of the per-thread data to the
saved context block. */
static unsigned long
registers_addr(pid)
int pid;
{
CORE_ADDR stblock;
int ecpoff = offsetof(st_t, ecp);
CORE_ADDR ecp;
errno = 0;
stblock = (CORE_ADDR) ptrace (PTRACE_THREADUSER, pid, (PTRACE_ARG3_TYPE)0,
0);
if (errno)
perror_with_name ("ptrace(PTRACE_THREADUSER)");
ecp = (CORE_ADDR) ptrace (PTRACE_PEEKTHREAD, pid, (PTRACE_ARG3_TYPE)ecpoff,
0);
if (errno)
perror_with_name ("ptrace(PTRACE_PEEKTHREAD)");
return ecp - stblock;
}
/* Fetch one or more registers from the inferior. REGNO == -1 to get
them all. We actually fetch more than requested, when convenient,
marking them as valid so we won't fetch them again. */
void
fetch_inferior_registers (regno)
int regno;
{
int reglo, reghi;
int i;
unsigned long ecp;
if (regno == -1)
{
reglo = 0;
reghi = NUM_REGS - 1;
}
else
reglo = reghi = regno;
ecp = registers_addr (inferior_pid);
for (regno = reglo; regno <= reghi; regno++)
{
char buf[MAX_REGISTER_RAW_SIZE];
int ptrace_fun = PTRACE_PEEKTHREAD;
#ifdef M68K
ptrace_fun = regno == SP_REGNUM ? PTRACE_PEEKUSP : PTRACE_PEEKTHREAD;
#endif
for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
{
unsigned int reg;
errno = 0;
reg = ptrace (ptrace_fun, inferior_pid,
(PTRACE_ARG3_TYPE) (ecp + regmap[regno] + i), 0);
if (errno)
perror_with_name ("ptrace(PTRACE_PEEKUSP)");
*(int *)&buf[i] = reg;
}
supply_register (regno, buf);
}
}
/* Store our register values back into the inferior.
If REGNO is -1, do this for all registers.
Otherwise, REGNO specifies which register (so we can save time). */
void
store_inferior_registers (regno)
int regno;
{
int reglo, reghi;
int i;
unsigned long ecp;
if (regno == -1)
{
reglo = 0;
reghi = NUM_REGS - 1;
}
else
reglo = reghi = regno;
ecp = registers_addr (inferior_pid);
for (regno = reglo; regno <= reghi; regno++)
{
int ptrace_fun = PTRACE_POKEUSER;
if (CANNOT_STORE_REGISTER (regno))
continue;
#ifdef M68K
ptrace_fun = regno == SP_REGNUM ? PTRACE_POKEUSP : PTRACE_POKEUSER;
#endif
for (i = 0; i < REGISTER_RAW_SIZE (regno); i += sizeof (int))
{
unsigned int reg;
reg = *(unsigned int *)&registers[REGISTER_BYTE (regno) + i];
errno = 0;
ptrace (ptrace_fun, inferior_pid,
(PTRACE_ARG3_TYPE) (ecp + regmap[regno] + i), reg);
if (errno)
perror_with_name ("ptrace(PTRACE_POKEUSP)");
}
}
}
#endif /* defined (I386) || defined (M68K) || defined (rs6000) */
/* Wait for child to do something. Return pid of child, or -1 in case
of error; store status through argument pointer OURSTATUS. */
int
child_wait (pid, ourstatus)
int pid;
struct target_waitstatus *ourstatus;
{
int save_errno;
int thread;
int status;
while (1)
{
int sig;
if (attach_flag)
set_sigint_trap(); /* Causes SIGINT to be passed on to the
attached process. */
pid = wait (&status);
#ifdef SPARC
/* Swap halves of status so that the rest of GDB can understand it */
status = (status << 16) | ((unsigned)status >> 16);
#endif
save_errno = errno;
if (attach_flag)
clear_sigint_trap();
if (pid == -1)
{
if (save_errno == EINTR)
continue;
fprintf_unfiltered (gdb_stderr, "Child process unexpectedly missing: %s.\n",
safe_strerror (save_errno));
/* Claim it exited with unknown signal. */
ourstatus->kind = TARGET_WAITKIND_SIGNALLED;
ourstatus->value.sig = TARGET_SIGNAL_UNKNOWN;
return -1;
}
if (pid != PIDGET (inferior_pid)) /* Some other process?!? */
continue;
/* thread = WIFTID (status);*/
thread = status >> 16;
/* Initial thread value can only be acquired via wait, so we have to
resort to this hack. */
if (TIDGET (inferior_pid) == 0)
{
inferior_pid = BUILDPID (inferior_pid, thread);
add_thread (inferior_pid);
}
pid = BUILDPID (pid, thread);
store_waitstatus (ourstatus, status);
return pid;
}
}
/* Convert a Lynx process ID to a string. Returns the string in a static
buffer. */
char *
lynx_pid_to_str (pid)
int pid;
{
static char buf[40];
sprintf (buf, "process %d thread %d", PIDGET (pid), TIDGET (pid));
return buf;
}
/* Extract the register values out of the core file and store
them where `read_register' will find them.
CORE_REG_SECT points to the register values themselves, read into memory.
CORE_REG_SIZE is the size of that area.
WHICH says which set of registers we are handling (0 = int, 2 = float
on machines where they are discontiguous).
REG_ADDR is the offset from u.u_ar0 to the register values relative to
core_reg_sect. This is used with old-fashioned core files to
locate the registers in a large upage-plus-stack ".reg" section.
Original upage address X is at location core_reg_sect+x+reg_addr.
*/
void
fetch_core_registers (core_reg_sect, core_reg_size, which, reg_addr)
char *core_reg_sect;
unsigned core_reg_size;
int which;
unsigned reg_addr;
{
struct st_entry s;
unsigned int regno;
for (regno = 0; regno < NUM_REGS; regno++)
supply_register (regno, core_reg_sect + offsetof (st_t, ec)
+ regmap[regno]);
#ifdef SPARC
/* Fetching this register causes all of the I & L regs to be read from the
stack and validated. */
fetch_inferior_registers (I0_REGNUM);
#endif
}