binutils-gdb/opcodes/disassemble.c
Alexandre Oliva d28847ce8e Contribute sh64-elf.
2001-10-08  Nick Clifton  <nickc@cambridge.redhat.com>
* sh64-opc.c: Regenerate.
2001-03-13  DJ Delorie  <dj@redhat.com>
* sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
purpose is more obvious.
* sh64-opc.c (shmedia_table): Ditto.
* sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
(print_insn_shmedia): Ditto.
2001-03-12  DJ Delorie  <dj@redhat.com>
* sh64-opc.c: Adjust comments to reflect reality: replace bits
3:0 with zeros (not "reserved"), replace "rrrrrr" with
"gggggg" for two-operand floating point opcodes.  Remove
"fsina".
2001-01-08  Hans-Peter Nilsson  <hpn@cygnus.com>
* sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
Correct printing of .byte:s.  Return number of printed bytes or
-1; never 0.
(print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto.  Print as .byte:s
to next four-byte-alignment if insn or data is not aligned.
2001-01-06  Hans-Peter Nilsson  <hpn@cygnus.com>
* sh64-dis.c: Update comments and fix comment formatting.
(initialize_shmedia_opcode_mask_table) <case A_IMMM>:
Abort instead of setting length to 0.
(crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
crange_bsearch_cmpl, sh64_get_contents_type,
sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
2001-01-05  Hans-Peter Nilsson  <hpn@cygnus.com>
* sh64-opc.c: Remove #if 0:d entries for instructions not found in
SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
2000-12-30  Hans-Peter Nilsson  <hpn@cygnus.com>
* sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
address with same prefix as SHcompact.
In the disassembler, use a .cranges section for linked executables.
* sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
and update for using structure in info->private_data.
(struct sh64_disassemble_info): New.
(is_shmedia_p): Delete.
(crange_qsort_cmpb): New function.
(crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
(crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
(init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
(sh64_get_contents_type, sh64_address_is_shmedia): New functions.
(print_insn_shmedia): Correct displaying of address after MOVI/SHORI
pair.  Display addresses for linked executables only.
(print_insn_sh64x_media): Initialize info->private_data by calling
init_sh64_disasm_info.
(print_insn_sh64x): Ditto.  Find out type of contents by calling
sh64_contents_type_disasm.  Display data regions using ".long" and
".byte" similar to unrecognized opcodes.
2000-12-19  Hans-Peter Nilsson  <hpn@cygnus.com>
* sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
information in section flags before considering symbols.  Don't
assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
* configure.in (bfd_sh_arch): Check presence of sh64 insns by
matching $target $canon_targets instead of looking at the
now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
* configure: Regenerate.
2000-11-25  Hans-Peter Nilsson  <hpn@cygnus.com>
* sh64-opc.c (shmedia_creg_table): New.
* sh64-opc.h (shmedia_creg_info): New type.
(shmedia_creg_table): Declare.
* sh64-dis.c (creg_name): New function.
(print_insn_shmedia): Use it.
* disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
bfd_mach_sh5 to print_insn_sh64 if big-endian and to
print_insn_sh64l if little-endian.
* sh64-dis.c (print_insn_shmedia): Make r unsigned.
(print_insn_sh64l): New.
(print_insn_sh64x): New.
(print_insn_sh64x_media): New.
(print_insn_sh64): Break out code to print_insn_sh64x and
print_insn_sh64x_media.
2000-11-24  Hans-Peter Nilsson  <hpn@cygnus.com>
* sh64-opc.h: New file
* sh64-opc.c: New file
* sh64-dis.c: New file
* Makefile.am: Add sh64 targets.
(HFILES): Add sh64-opc.h.
(CFILES): Add sh64-opc.c and sh64-dis.c.
(ALL_MACHINES): Add sh64 files.
* Makefile.in: Regenerate.
* configure.in: Add support for sh64 to bfd_sh_arch.
* configure: Regenerate.
* disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
(disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
print_insn_sh64.
* sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
* po/POTFILES.in: Regenerate.
* po/opcodes.pot: Regenerate.
2002-02-08 05:51:04 +00:00

361 lines
7.7 KiB
C

/* Select disassembly routine for specified architecture.
Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Free Software Foundation, Inc.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
#include "sysdep.h"
#include "dis-asm.h"
#ifdef ARCH_all
#define ARCH_a29k
#define ARCH_alpha
#define ARCH_arc
#define ARCH_arm
#define ARCH_avr
#define ARCH_cris
#define ARCH_d10v
#define ARCH_d30v
#define ARCH_h8300
#define ARCH_h8500
#define ARCH_hppa
#define ARCH_i370
#define ARCH_i386
#define ARCH_i860
#define ARCH_i960
#define ARCH_ia64
#define ARCH_fr30
#define ARCH_m32r
#define ARCH_m68k
#define ARCH_m68hc11
#define ARCH_m68hc12
#define ARCH_m88k
#define ARCH_mcore
#define ARCH_mips
#define ARCH_mmix
#define ARCH_mn10200
#define ARCH_mn10300
#define ARCH_ns32k
#define ARCH_openrisc
#define ARCH_or32
#define ARCH_pdp11
#define ARCH_pj
#define ARCH_powerpc
#define ARCH_rs6000
#define ARCH_s390
#define ARCH_sh
#define ARCH_sparc
#define ARCH_tic30
#define ARCH_tic54x
#define ARCH_tic80
#define ARCH_v850
#define ARCH_vax
#define ARCH_w65
#define ARCH_xstormy16
#define ARCH_z8k
#define INCLUDE_SHMEDIA
#endif
disassembler_ftype
disassembler (abfd)
bfd *abfd;
{
enum bfd_architecture a = bfd_get_arch (abfd);
disassembler_ftype disassemble;
switch (a)
{
/* If you add a case to this table, also add it to the
ARCH_all definition right above this function. */
#ifdef ARCH_a29k
case bfd_arch_a29k:
/* As far as I know we only handle big-endian 29k objects. */
disassemble = print_insn_big_a29k;
break;
#endif
#ifdef ARCH_alpha
case bfd_arch_alpha:
disassemble = print_insn_alpha;
break;
#endif
#ifdef ARCH_arc
case bfd_arch_arc:
{
disassemble = arc_get_disassembler (abfd);
break;
}
#endif
#ifdef ARCH_arm
case bfd_arch_arm:
if (bfd_big_endian (abfd))
disassemble = print_insn_big_arm;
else
disassemble = print_insn_little_arm;
break;
#endif
#ifdef ARCH_avr
case bfd_arch_avr:
disassemble = print_insn_avr;
break;
#endif
#ifdef ARCH_cris
case bfd_arch_cris:
disassemble = cris_get_disassembler (abfd);
break;
#endif
#ifdef ARCH_d10v
case bfd_arch_d10v:
disassemble = print_insn_d10v;
break;
#endif
#ifdef ARCH_d30v
case bfd_arch_d30v:
disassemble = print_insn_d30v;
break;
#endif
#ifdef ARCH_h8300
case bfd_arch_h8300:
if (bfd_get_mach(abfd) == bfd_mach_h8300h)
disassemble = print_insn_h8300h;
else if (bfd_get_mach(abfd) == bfd_mach_h8300s)
disassemble = print_insn_h8300s;
else
disassemble = print_insn_h8300;
break;
#endif
#ifdef ARCH_h8500
case bfd_arch_h8500:
disassemble = print_insn_h8500;
break;
#endif
#ifdef ARCH_hppa
case bfd_arch_hppa:
disassemble = print_insn_hppa;
break;
#endif
#ifdef ARCH_i370
case bfd_arch_i370:
disassemble = print_insn_i370;
break;
#endif
#ifdef ARCH_i386
case bfd_arch_i386:
disassemble = print_insn_i386;
break;
#endif
#ifdef ARCH_i860
case bfd_arch_i860:
disassemble = print_insn_i860;
break;
#endif
#ifdef ARCH_i960
case bfd_arch_i960:
disassemble = print_insn_i960;
break;
#endif
#ifdef ARCH_ia64
case bfd_arch_ia64:
disassemble = print_insn_ia64;
break;
#endif
#ifdef ARCH_fr30
case bfd_arch_fr30:
disassemble = print_insn_fr30;
break;
#endif
#ifdef ARCH_m32r
case bfd_arch_m32r:
disassemble = print_insn_m32r;
break;
#endif
#if defined(ARCH_m68hc11) || defined(ARCH_m68hc12)
case bfd_arch_m68hc11:
disassemble = print_insn_m68hc11;
break;
case bfd_arch_m68hc12:
disassemble = print_insn_m68hc12;
break;
#endif
#ifdef ARCH_m68k
case bfd_arch_m68k:
disassemble = print_insn_m68k;
break;
#endif
#ifdef ARCH_m88k
case bfd_arch_m88k:
disassemble = print_insn_m88k;
break;
#endif
#ifdef ARCH_ns32k
case bfd_arch_ns32k:
disassemble = print_insn_ns32k;
break;
#endif
#ifdef ARCH_mcore
case bfd_arch_mcore:
disassemble = print_insn_mcore;
break;
#endif
#ifdef ARCH_mips
case bfd_arch_mips:
if (bfd_big_endian (abfd))
disassemble = print_insn_big_mips;
else
disassemble = print_insn_little_mips;
break;
#endif
#ifdef ARCH_mmix
case bfd_arch_mmix:
disassemble = print_insn_mmix;
break;
#endif
#ifdef ARCH_mn10200
case bfd_arch_mn10200:
disassemble = print_insn_mn10200;
break;
#endif
#ifdef ARCH_mn10300
case bfd_arch_mn10300:
disassemble = print_insn_mn10300;
break;
#endif
#ifdef ARCH_openrisc
case bfd_arch_openrisc:
disassemble = print_insn_openrisc;
break;
#endif
#ifdef ARCH_or32
case bfd_arch_or32:
if (bfd_big_endian (abfd))
disassemble = print_insn_big_or32;
else
disassemble = print_insn_little_or32;
break;
#endif
#ifdef ARCH_pdp11
case bfd_arch_pdp11:
disassemble = print_insn_pdp11;
break;
#endif
#ifdef ARCH_pj
case bfd_arch_pj:
disassemble = print_insn_pj;
break;
#endif
#ifdef ARCH_powerpc
case bfd_arch_powerpc:
if (bfd_big_endian (abfd))
disassemble = print_insn_big_powerpc;
else
disassemble = print_insn_little_powerpc;
break;
#endif
#ifdef ARCH_rs6000
case bfd_arch_rs6000:
if (bfd_get_mach (abfd) == bfd_mach_ppc_620)
disassemble = print_insn_big_powerpc;
else
disassemble = print_insn_rs6000;
break;
#endif
#ifdef ARCH_s390
case bfd_arch_s390:
disassemble = print_insn_s390;
break;
#endif
#ifdef ARCH_sh
case bfd_arch_sh:
#ifdef INCLUDE_SHMEDIA
if (bfd_get_mach (abfd) == bfd_mach_sh5)
{
if (bfd_big_endian (abfd))
disassemble = print_insn_sh64;
else
disassemble = print_insn_sh64l;
break;
}
#endif
if (bfd_big_endian (abfd))
disassemble = print_insn_sh;
else
disassemble = print_insn_shl;
break;
#endif
#ifdef ARCH_sparc
case bfd_arch_sparc:
disassemble = print_insn_sparc;
break;
#endif
#ifdef ARCH_tic30
case bfd_arch_tic30:
disassemble = print_insn_tic30;
break;
#endif
#ifdef ARCH_tic54x
case bfd_arch_tic54x:
disassemble = print_insn_tic54x;
break;
#endif
#ifdef ARCH_tic80
case bfd_arch_tic80:
disassemble = print_insn_tic80;
break;
#endif
#ifdef ARCH_v850
case bfd_arch_v850:
disassemble = print_insn_v850;
break;
#endif
#ifdef ARCH_w65
case bfd_arch_w65:
disassemble = print_insn_w65;
break;
#endif
#ifdef ARCH_xstormy16
case bfd_arch_xstormy16:
disassemble = print_insn_xstormy16;
break;
#endif
#ifdef ARCH_z8k
case bfd_arch_z8k:
if (bfd_get_mach(abfd) == bfd_mach_z8001)
disassemble = print_insn_z8001;
else
disassemble = print_insn_z8002;
break;
#endif
#ifdef ARCH_vax
case bfd_arch_vax:
disassemble = print_insn_vax;
break;
#endif
default:
return 0;
}
return disassemble;
}
void
disassembler_usage (stream)
FILE * stream ATTRIBUTE_UNUSED;
{
#ifdef ARCH_arm
print_arm_disassembler_options (stream);
#endif
return;
}