mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-15 04:31:49 +08:00
cd0449ab05
Throw away the dwarf2 stash if it becomes invalid due to section VMAs changing. It would be nice to reclaim all the bfd_alloc memory here when we throw away the stash, perhaps by putting everything we alloc on a private dwarf2 objalloc, but I haven't done that with this patch. I've also fixed a problem with bfd_perform_relocation losing reloc addends, which meant a second or subsequent look at debug info sections did not properly relocate the sections. I can't see why bfd_perform_relocation should need to change addends except for ld -r, and the history (985fca12
,e98e6ec1
) doesn't help much. Finally, the patch tweaks place_sections to avoid unnecessary work. If we've mapped input to output sections, then input section VMA isn't used so there's not much point in adjusting it. Incidentally, this also means place_sections isn't effective in all cases. PR ld/16787 * dwarf2.c (struct dwarf2_debug): Add sec_vma field. (place_sections): Do not modify VMA of sections when called from linker after sections have been placed in output sections. Short circuit single section case. (save_section_vma, section_vma_same): New functions. (_bfd_dwarf2_slurp_debug_info): Throw away stash if section VMAs change. * reloc.c (bfd_perform_relocation): Do not modify reloc addend when non-relocatable.
7600 lines
172 KiB
C
7600 lines
172 KiB
C
/* BFD support for handling relocation entries.
|
|
Copyright (C) 1990-2014 Free Software Foundation, Inc.
|
|
Written by Cygnus Support.
|
|
|
|
This file is part of BFD, the Binary File Descriptor library.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
|
|
MA 02110-1301, USA. */
|
|
|
|
/*
|
|
SECTION
|
|
Relocations
|
|
|
|
BFD maintains relocations in much the same way it maintains
|
|
symbols: they are left alone until required, then read in
|
|
en-masse and translated into an internal form. A common
|
|
routine <<bfd_perform_relocation>> acts upon the
|
|
canonical form to do the fixup.
|
|
|
|
Relocations are maintained on a per section basis,
|
|
while symbols are maintained on a per BFD basis.
|
|
|
|
All that a back end has to do to fit the BFD interface is to create
|
|
a <<struct reloc_cache_entry>> for each relocation
|
|
in a particular section, and fill in the right bits of the structures.
|
|
|
|
@menu
|
|
@* typedef arelent::
|
|
@* howto manager::
|
|
@end menu
|
|
|
|
*/
|
|
|
|
/* DO compile in the reloc_code name table from libbfd.h. */
|
|
#define _BFD_MAKE_TABLE_bfd_reloc_code_real
|
|
|
|
#include "sysdep.h"
|
|
#include "bfd.h"
|
|
#include "bfdlink.h"
|
|
#include "libbfd.h"
|
|
/*
|
|
DOCDD
|
|
INODE
|
|
typedef arelent, howto manager, Relocations, Relocations
|
|
|
|
SUBSECTION
|
|
typedef arelent
|
|
|
|
This is the structure of a relocation entry:
|
|
|
|
CODE_FRAGMENT
|
|
.
|
|
.typedef enum bfd_reloc_status
|
|
.{
|
|
. {* No errors detected. *}
|
|
. bfd_reloc_ok,
|
|
.
|
|
. {* The relocation was performed, but there was an overflow. *}
|
|
. bfd_reloc_overflow,
|
|
.
|
|
. {* The address to relocate was not within the section supplied. *}
|
|
. bfd_reloc_outofrange,
|
|
.
|
|
. {* Used by special functions. *}
|
|
. bfd_reloc_continue,
|
|
.
|
|
. {* Unsupported relocation size requested. *}
|
|
. bfd_reloc_notsupported,
|
|
.
|
|
. {* Unused. *}
|
|
. bfd_reloc_other,
|
|
.
|
|
. {* The symbol to relocate against was undefined. *}
|
|
. bfd_reloc_undefined,
|
|
.
|
|
. {* The relocation was performed, but may not be ok - presently
|
|
. generated only when linking i960 coff files with i960 b.out
|
|
. symbols. If this type is returned, the error_message argument
|
|
. to bfd_perform_relocation will be set. *}
|
|
. bfd_reloc_dangerous
|
|
. }
|
|
. bfd_reloc_status_type;
|
|
.
|
|
.
|
|
.typedef struct reloc_cache_entry
|
|
.{
|
|
. {* A pointer into the canonical table of pointers. *}
|
|
. struct bfd_symbol **sym_ptr_ptr;
|
|
.
|
|
. {* offset in section. *}
|
|
. bfd_size_type address;
|
|
.
|
|
. {* addend for relocation value. *}
|
|
. bfd_vma addend;
|
|
.
|
|
. {* Pointer to how to perform the required relocation. *}
|
|
. reloc_howto_type *howto;
|
|
.
|
|
.}
|
|
.arelent;
|
|
.
|
|
*/
|
|
|
|
/*
|
|
DESCRIPTION
|
|
|
|
Here is a description of each of the fields within an <<arelent>>:
|
|
|
|
o <<sym_ptr_ptr>>
|
|
|
|
The symbol table pointer points to a pointer to the symbol
|
|
associated with the relocation request. It is the pointer
|
|
into the table returned by the back end's
|
|
<<canonicalize_symtab>> action. @xref{Symbols}. The symbol is
|
|
referenced through a pointer to a pointer so that tools like
|
|
the linker can fix up all the symbols of the same name by
|
|
modifying only one pointer. The relocation routine looks in
|
|
the symbol and uses the base of the section the symbol is
|
|
attached to and the value of the symbol as the initial
|
|
relocation offset. If the symbol pointer is zero, then the
|
|
section provided is looked up.
|
|
|
|
o <<address>>
|
|
|
|
The <<address>> field gives the offset in bytes from the base of
|
|
the section data which owns the relocation record to the first
|
|
byte of relocatable information. The actual data relocated
|
|
will be relative to this point; for example, a relocation
|
|
type which modifies the bottom two bytes of a four byte word
|
|
would not touch the first byte pointed to in a big endian
|
|
world.
|
|
|
|
o <<addend>>
|
|
|
|
The <<addend>> is a value provided by the back end to be added (!)
|
|
to the relocation offset. Its interpretation is dependent upon
|
|
the howto. For example, on the 68k the code:
|
|
|
|
| char foo[];
|
|
| main()
|
|
| {
|
|
| return foo[0x12345678];
|
|
| }
|
|
|
|
Could be compiled into:
|
|
|
|
| linkw fp,#-4
|
|
| moveb @@#12345678,d0
|
|
| extbl d0
|
|
| unlk fp
|
|
| rts
|
|
|
|
This could create a reloc pointing to <<foo>>, but leave the
|
|
offset in the data, something like:
|
|
|
|
|RELOCATION RECORDS FOR [.text]:
|
|
|offset type value
|
|
|00000006 32 _foo
|
|
|
|
|
|00000000 4e56 fffc ; linkw fp,#-4
|
|
|00000004 1039 1234 5678 ; moveb @@#12345678,d0
|
|
|0000000a 49c0 ; extbl d0
|
|
|0000000c 4e5e ; unlk fp
|
|
|0000000e 4e75 ; rts
|
|
|
|
Using coff and an 88k, some instructions don't have enough
|
|
space in them to represent the full address range, and
|
|
pointers have to be loaded in two parts. So you'd get something like:
|
|
|
|
| or.u r13,r0,hi16(_foo+0x12345678)
|
|
| ld.b r2,r13,lo16(_foo+0x12345678)
|
|
| jmp r1
|
|
|
|
This should create two relocs, both pointing to <<_foo>>, and with
|
|
0x12340000 in their addend field. The data would consist of:
|
|
|
|
|RELOCATION RECORDS FOR [.text]:
|
|
|offset type value
|
|
|00000002 HVRT16 _foo+0x12340000
|
|
|00000006 LVRT16 _foo+0x12340000
|
|
|
|
|
|00000000 5da05678 ; or.u r13,r0,0x5678
|
|
|00000004 1c4d5678 ; ld.b r2,r13,0x5678
|
|
|00000008 f400c001 ; jmp r1
|
|
|
|
The relocation routine digs out the value from the data, adds
|
|
it to the addend to get the original offset, and then adds the
|
|
value of <<_foo>>. Note that all 32 bits have to be kept around
|
|
somewhere, to cope with carry from bit 15 to bit 16.
|
|
|
|
One further example is the sparc and the a.out format. The
|
|
sparc has a similar problem to the 88k, in that some
|
|
instructions don't have room for an entire offset, but on the
|
|
sparc the parts are created in odd sized lumps. The designers of
|
|
the a.out format chose to not use the data within the section
|
|
for storing part of the offset; all the offset is kept within
|
|
the reloc. Anything in the data should be ignored.
|
|
|
|
| save %sp,-112,%sp
|
|
| sethi %hi(_foo+0x12345678),%g2
|
|
| ldsb [%g2+%lo(_foo+0x12345678)],%i0
|
|
| ret
|
|
| restore
|
|
|
|
Both relocs contain a pointer to <<foo>>, and the offsets
|
|
contain junk.
|
|
|
|
|RELOCATION RECORDS FOR [.text]:
|
|
|offset type value
|
|
|00000004 HI22 _foo+0x12345678
|
|
|00000008 LO10 _foo+0x12345678
|
|
|
|
|
|00000000 9de3bf90 ; save %sp,-112,%sp
|
|
|00000004 05000000 ; sethi %hi(_foo+0),%g2
|
|
|00000008 f048a000 ; ldsb [%g2+%lo(_foo+0)],%i0
|
|
|0000000c 81c7e008 ; ret
|
|
|00000010 81e80000 ; restore
|
|
|
|
o <<howto>>
|
|
|
|
The <<howto>> field can be imagined as a
|
|
relocation instruction. It is a pointer to a structure which
|
|
contains information on what to do with all of the other
|
|
information in the reloc record and data section. A back end
|
|
would normally have a relocation instruction set and turn
|
|
relocations into pointers to the correct structure on input -
|
|
but it would be possible to create each howto field on demand.
|
|
|
|
*/
|
|
|
|
/*
|
|
SUBSUBSECTION
|
|
<<enum complain_overflow>>
|
|
|
|
Indicates what sort of overflow checking should be done when
|
|
performing a relocation.
|
|
|
|
CODE_FRAGMENT
|
|
.
|
|
.enum complain_overflow
|
|
.{
|
|
. {* Do not complain on overflow. *}
|
|
. complain_overflow_dont,
|
|
.
|
|
. {* Complain if the value overflows when considered as a signed
|
|
. number one bit larger than the field. ie. A bitfield of N bits
|
|
. is allowed to represent -2**n to 2**n-1. *}
|
|
. complain_overflow_bitfield,
|
|
.
|
|
. {* Complain if the value overflows when considered as a signed
|
|
. number. *}
|
|
. complain_overflow_signed,
|
|
.
|
|
. {* Complain if the value overflows when considered as an
|
|
. unsigned number. *}
|
|
. complain_overflow_unsigned
|
|
.};
|
|
|
|
*/
|
|
|
|
/*
|
|
SUBSUBSECTION
|
|
<<reloc_howto_type>>
|
|
|
|
The <<reloc_howto_type>> is a structure which contains all the
|
|
information that libbfd needs to know to tie up a back end's data.
|
|
|
|
CODE_FRAGMENT
|
|
.struct bfd_symbol; {* Forward declaration. *}
|
|
.
|
|
.struct reloc_howto_struct
|
|
.{
|
|
. {* The type field has mainly a documentary use - the back end can
|
|
. do what it wants with it, though normally the back end's
|
|
. external idea of what a reloc number is stored
|
|
. in this field. For example, a PC relative word relocation
|
|
. in a coff environment has the type 023 - because that's
|
|
. what the outside world calls a R_PCRWORD reloc. *}
|
|
. unsigned int type;
|
|
.
|
|
. {* The value the final relocation is shifted right by. This drops
|
|
. unwanted data from the relocation. *}
|
|
. unsigned int rightshift;
|
|
.
|
|
. {* The size of the item to be relocated. This is *not* a
|
|
. power-of-two measure. To get the number of bytes operated
|
|
. on by a type of relocation, use bfd_get_reloc_size. *}
|
|
. int size;
|
|
.
|
|
. {* The number of bits in the item to be relocated. This is used
|
|
. when doing overflow checking. *}
|
|
. unsigned int bitsize;
|
|
.
|
|
. {* The relocation is relative to the field being relocated. *}
|
|
. bfd_boolean pc_relative;
|
|
.
|
|
. {* The bit position of the reloc value in the destination.
|
|
. The relocated value is left shifted by this amount. *}
|
|
. unsigned int bitpos;
|
|
.
|
|
. {* What type of overflow error should be checked for when
|
|
. relocating. *}
|
|
. enum complain_overflow complain_on_overflow;
|
|
.
|
|
. {* If this field is non null, then the supplied function is
|
|
. called rather than the normal function. This allows really
|
|
. strange relocation methods to be accommodated (e.g., i960 callj
|
|
. instructions). *}
|
|
. bfd_reloc_status_type (*special_function)
|
|
. (bfd *, arelent *, struct bfd_symbol *, void *, asection *,
|
|
. bfd *, char **);
|
|
.
|
|
. {* The textual name of the relocation type. *}
|
|
. char *name;
|
|
.
|
|
. {* Some formats record a relocation addend in the section contents
|
|
. rather than with the relocation. For ELF formats this is the
|
|
. distinction between USE_REL and USE_RELA (though the code checks
|
|
. for USE_REL == 1/0). The value of this field is TRUE if the
|
|
. addend is recorded with the section contents; when performing a
|
|
. partial link (ld -r) the section contents (the data) will be
|
|
. modified. The value of this field is FALSE if addends are
|
|
. recorded with the relocation (in arelent.addend); when performing
|
|
. a partial link the relocation will be modified.
|
|
. All relocations for all ELF USE_RELA targets should set this field
|
|
. to FALSE (values of TRUE should be looked on with suspicion).
|
|
. However, the converse is not true: not all relocations of all ELF
|
|
. USE_REL targets set this field to TRUE. Why this is so is peculiar
|
|
. to each particular target. For relocs that aren't used in partial
|
|
. links (e.g. GOT stuff) it doesn't matter what this is set to. *}
|
|
. bfd_boolean partial_inplace;
|
|
.
|
|
. {* src_mask selects the part of the instruction (or data) to be used
|
|
. in the relocation sum. If the target relocations don't have an
|
|
. addend in the reloc, eg. ELF USE_REL, src_mask will normally equal
|
|
. dst_mask to extract the addend from the section contents. If
|
|
. relocations do have an addend in the reloc, eg. ELF USE_RELA, this
|
|
. field should be zero. Non-zero values for ELF USE_RELA targets are
|
|
. bogus as in those cases the value in the dst_mask part of the
|
|
. section contents should be treated as garbage. *}
|
|
. bfd_vma src_mask;
|
|
.
|
|
. {* dst_mask selects which parts of the instruction (or data) are
|
|
. replaced with a relocated value. *}
|
|
. bfd_vma dst_mask;
|
|
.
|
|
. {* When some formats create PC relative instructions, they leave
|
|
. the value of the pc of the place being relocated in the offset
|
|
. slot of the instruction, so that a PC relative relocation can
|
|
. be made just by adding in an ordinary offset (e.g., sun3 a.out).
|
|
. Some formats leave the displacement part of an instruction
|
|
. empty (e.g., m88k bcs); this flag signals the fact. *}
|
|
. bfd_boolean pcrel_offset;
|
|
.};
|
|
.
|
|
*/
|
|
|
|
/*
|
|
FUNCTION
|
|
The HOWTO Macro
|
|
|
|
DESCRIPTION
|
|
The HOWTO define is horrible and will go away.
|
|
|
|
.#define HOWTO(C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC) \
|
|
. { (unsigned) C, R, S, B, P, BI, O, SF, NAME, INPLACE, MASKSRC, MASKDST, PC }
|
|
|
|
DESCRIPTION
|
|
And will be replaced with the totally magic way. But for the
|
|
moment, we are compatible, so do it this way.
|
|
|
|
.#define NEWHOWTO(FUNCTION, NAME, SIZE, REL, IN) \
|
|
. HOWTO (0, 0, SIZE, 0, REL, 0, complain_overflow_dont, FUNCTION, \
|
|
. NAME, FALSE, 0, 0, IN)
|
|
.
|
|
|
|
DESCRIPTION
|
|
This is used to fill in an empty howto entry in an array.
|
|
|
|
.#define EMPTY_HOWTO(C) \
|
|
. HOWTO ((C), 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL, \
|
|
. NULL, FALSE, 0, 0, FALSE)
|
|
.
|
|
|
|
DESCRIPTION
|
|
Helper routine to turn a symbol into a relocation value.
|
|
|
|
.#define HOWTO_PREPARE(relocation, symbol) \
|
|
. { \
|
|
. if (symbol != NULL) \
|
|
. { \
|
|
. if (bfd_is_com_section (symbol->section)) \
|
|
. { \
|
|
. relocation = 0; \
|
|
. } \
|
|
. else \
|
|
. { \
|
|
. relocation = symbol->value; \
|
|
. } \
|
|
. } \
|
|
. }
|
|
.
|
|
*/
|
|
|
|
/*
|
|
FUNCTION
|
|
bfd_get_reloc_size
|
|
|
|
SYNOPSIS
|
|
unsigned int bfd_get_reloc_size (reloc_howto_type *);
|
|
|
|
DESCRIPTION
|
|
For a reloc_howto_type that operates on a fixed number of bytes,
|
|
this returns the number of bytes operated on.
|
|
*/
|
|
|
|
unsigned int
|
|
bfd_get_reloc_size (reloc_howto_type *howto)
|
|
{
|
|
switch (howto->size)
|
|
{
|
|
case 0: return 1;
|
|
case 1: return 2;
|
|
case 2: return 4;
|
|
case 3: return 0;
|
|
case 4: return 8;
|
|
case 8: return 16;
|
|
case -2: return 4;
|
|
default: abort ();
|
|
}
|
|
}
|
|
|
|
/*
|
|
TYPEDEF
|
|
arelent_chain
|
|
|
|
DESCRIPTION
|
|
|
|
How relocs are tied together in an <<asection>>:
|
|
|
|
.typedef struct relent_chain
|
|
.{
|
|
. arelent relent;
|
|
. struct relent_chain *next;
|
|
.}
|
|
.arelent_chain;
|
|
.
|
|
*/
|
|
|
|
/* N_ONES produces N one bits, without overflowing machine arithmetic. */
|
|
#define N_ONES(n) (((((bfd_vma) 1 << ((n) - 1)) - 1) << 1) | 1)
|
|
|
|
/*
|
|
FUNCTION
|
|
bfd_check_overflow
|
|
|
|
SYNOPSIS
|
|
bfd_reloc_status_type bfd_check_overflow
|
|
(enum complain_overflow how,
|
|
unsigned int bitsize,
|
|
unsigned int rightshift,
|
|
unsigned int addrsize,
|
|
bfd_vma relocation);
|
|
|
|
DESCRIPTION
|
|
Perform overflow checking on @var{relocation} which has
|
|
@var{bitsize} significant bits and will be shifted right by
|
|
@var{rightshift} bits, on a machine with addresses containing
|
|
@var{addrsize} significant bits. The result is either of
|
|
@code{bfd_reloc_ok} or @code{bfd_reloc_overflow}.
|
|
|
|
*/
|
|
|
|
bfd_reloc_status_type
|
|
bfd_check_overflow (enum complain_overflow how,
|
|
unsigned int bitsize,
|
|
unsigned int rightshift,
|
|
unsigned int addrsize,
|
|
bfd_vma relocation)
|
|
{
|
|
bfd_vma fieldmask, addrmask, signmask, ss, a;
|
|
bfd_reloc_status_type flag = bfd_reloc_ok;
|
|
|
|
/* Note: BITSIZE should always be <= ADDRSIZE, but in case it's not,
|
|
we'll be permissive: extra bits in the field mask will
|
|
automatically extend the address mask for purposes of the
|
|
overflow check. */
|
|
fieldmask = N_ONES (bitsize);
|
|
signmask = ~fieldmask;
|
|
addrmask = N_ONES (addrsize) | (fieldmask << rightshift);
|
|
a = (relocation & addrmask) >> rightshift;
|
|
|
|
switch (how)
|
|
{
|
|
case complain_overflow_dont:
|
|
break;
|
|
|
|
case complain_overflow_signed:
|
|
/* If any sign bits are set, all sign bits must be set. That
|
|
is, A must be a valid negative address after shifting. */
|
|
signmask = ~ (fieldmask >> 1);
|
|
/* Fall thru */
|
|
|
|
case complain_overflow_bitfield:
|
|
/* Bitfields are sometimes signed, sometimes unsigned. We
|
|
explicitly allow an address wrap too, which means a bitfield
|
|
of n bits is allowed to store -2**n to 2**n-1. Thus overflow
|
|
if the value has some, but not all, bits set outside the
|
|
field. */
|
|
ss = a & signmask;
|
|
if (ss != 0 && ss != ((addrmask >> rightshift) & signmask))
|
|
flag = bfd_reloc_overflow;
|
|
break;
|
|
|
|
case complain_overflow_unsigned:
|
|
/* We have an overflow if the address does not fit in the field. */
|
|
if ((a & signmask) != 0)
|
|
flag = bfd_reloc_overflow;
|
|
break;
|
|
|
|
default:
|
|
abort ();
|
|
}
|
|
|
|
return flag;
|
|
}
|
|
|
|
/*
|
|
FUNCTION
|
|
bfd_perform_relocation
|
|
|
|
SYNOPSIS
|
|
bfd_reloc_status_type bfd_perform_relocation
|
|
(bfd *abfd,
|
|
arelent *reloc_entry,
|
|
void *data,
|
|
asection *input_section,
|
|
bfd *output_bfd,
|
|
char **error_message);
|
|
|
|
DESCRIPTION
|
|
If @var{output_bfd} is supplied to this function, the
|
|
generated image will be relocatable; the relocations are
|
|
copied to the output file after they have been changed to
|
|
reflect the new state of the world. There are two ways of
|
|
reflecting the results of partial linkage in an output file:
|
|
by modifying the output data in place, and by modifying the
|
|
relocation record. Some native formats (e.g., basic a.out and
|
|
basic coff) have no way of specifying an addend in the
|
|
relocation type, so the addend has to go in the output data.
|
|
This is no big deal since in these formats the output data
|
|
slot will always be big enough for the addend. Complex reloc
|
|
types with addends were invented to solve just this problem.
|
|
The @var{error_message} argument is set to an error message if
|
|
this return @code{bfd_reloc_dangerous}.
|
|
|
|
*/
|
|
|
|
bfd_reloc_status_type
|
|
bfd_perform_relocation (bfd *abfd,
|
|
arelent *reloc_entry,
|
|
void *data,
|
|
asection *input_section,
|
|
bfd *output_bfd,
|
|
char **error_message)
|
|
{
|
|
bfd_vma relocation;
|
|
bfd_reloc_status_type flag = bfd_reloc_ok;
|
|
bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
|
|
bfd_vma output_base = 0;
|
|
reloc_howto_type *howto = reloc_entry->howto;
|
|
asection *reloc_target_output_section;
|
|
asymbol *symbol;
|
|
|
|
symbol = *(reloc_entry->sym_ptr_ptr);
|
|
if (bfd_is_abs_section (symbol->section)
|
|
&& output_bfd != NULL)
|
|
{
|
|
reloc_entry->address += input_section->output_offset;
|
|
return bfd_reloc_ok;
|
|
}
|
|
|
|
/* If we are not producing relocatable output, return an error if
|
|
the symbol is not defined. An undefined weak symbol is
|
|
considered to have a value of zero (SVR4 ABI, p. 4-27). */
|
|
if (bfd_is_und_section (symbol->section)
|
|
&& (symbol->flags & BSF_WEAK) == 0
|
|
&& output_bfd == NULL)
|
|
flag = bfd_reloc_undefined;
|
|
|
|
/* If there is a function supplied to handle this relocation type,
|
|
call it. It'll return `bfd_reloc_continue' if further processing
|
|
can be done. */
|
|
if (howto->special_function)
|
|
{
|
|
bfd_reloc_status_type cont;
|
|
cont = howto->special_function (abfd, reloc_entry, symbol, data,
|
|
input_section, output_bfd,
|
|
error_message);
|
|
if (cont != bfd_reloc_continue)
|
|
return cont;
|
|
}
|
|
|
|
/* Is the address of the relocation really within the section? */
|
|
if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
|
|
return bfd_reloc_outofrange;
|
|
|
|
/* Work out which section the relocation is targeted at and the
|
|
initial relocation command value. */
|
|
|
|
/* Get symbol value. (Common symbols are special.) */
|
|
if (bfd_is_com_section (symbol->section))
|
|
relocation = 0;
|
|
else
|
|
relocation = symbol->value;
|
|
|
|
reloc_target_output_section = symbol->section->output_section;
|
|
|
|
/* Convert input-section-relative symbol value to absolute. */
|
|
if ((output_bfd && ! howto->partial_inplace)
|
|
|| reloc_target_output_section == NULL)
|
|
output_base = 0;
|
|
else
|
|
output_base = reloc_target_output_section->vma;
|
|
|
|
relocation += output_base + symbol->section->output_offset;
|
|
|
|
/* Add in supplied addend. */
|
|
relocation += reloc_entry->addend;
|
|
|
|
/* Here the variable relocation holds the final address of the
|
|
symbol we are relocating against, plus any addend. */
|
|
|
|
if (howto->pc_relative)
|
|
{
|
|
/* This is a PC relative relocation. We want to set RELOCATION
|
|
to the distance between the address of the symbol and the
|
|
location. RELOCATION is already the address of the symbol.
|
|
|
|
We start by subtracting the address of the section containing
|
|
the location.
|
|
|
|
If pcrel_offset is set, we must further subtract the position
|
|
of the location within the section. Some targets arrange for
|
|
the addend to be the negative of the position of the location
|
|
within the section; for example, i386-aout does this. For
|
|
i386-aout, pcrel_offset is FALSE. Some other targets do not
|
|
include the position of the location; for example, m88kbcs,
|
|
or ELF. For those targets, pcrel_offset is TRUE.
|
|
|
|
If we are producing relocatable output, then we must ensure
|
|
that this reloc will be correctly computed when the final
|
|
relocation is done. If pcrel_offset is FALSE we want to wind
|
|
up with the negative of the location within the section,
|
|
which means we must adjust the existing addend by the change
|
|
in the location within the section. If pcrel_offset is TRUE
|
|
we do not want to adjust the existing addend at all.
|
|
|
|
FIXME: This seems logical to me, but for the case of
|
|
producing relocatable output it is not what the code
|
|
actually does. I don't want to change it, because it seems
|
|
far too likely that something will break. */
|
|
|
|
relocation -=
|
|
input_section->output_section->vma + input_section->output_offset;
|
|
|
|
if (howto->pcrel_offset)
|
|
relocation -= reloc_entry->address;
|
|
}
|
|
|
|
if (output_bfd != NULL)
|
|
{
|
|
if (! howto->partial_inplace)
|
|
{
|
|
/* This is a partial relocation, and we want to apply the relocation
|
|
to the reloc entry rather than the raw data. Modify the reloc
|
|
inplace to reflect what we now know. */
|
|
reloc_entry->addend = relocation;
|
|
reloc_entry->address += input_section->output_offset;
|
|
return flag;
|
|
}
|
|
else
|
|
{
|
|
/* This is a partial relocation, but inplace, so modify the
|
|
reloc record a bit.
|
|
|
|
If we've relocated with a symbol with a section, change
|
|
into a ref to the section belonging to the symbol. */
|
|
|
|
reloc_entry->address += input_section->output_offset;
|
|
|
|
/* WTF?? */
|
|
if (abfd->xvec->flavour == bfd_target_coff_flavour
|
|
&& strcmp (abfd->xvec->name, "coff-Intel-little") != 0
|
|
&& strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
|
|
{
|
|
/* For m68k-coff, the addend was being subtracted twice during
|
|
relocation with -r. Removing the line below this comment
|
|
fixes that problem; see PR 2953.
|
|
|
|
However, Ian wrote the following, regarding removing the line below,
|
|
which explains why it is still enabled: --djm
|
|
|
|
If you put a patch like that into BFD you need to check all the COFF
|
|
linkers. I am fairly certain that patch will break coff-i386 (e.g.,
|
|
SCO); see coff_i386_reloc in coff-i386.c where I worked around the
|
|
problem in a different way. There may very well be a reason that the
|
|
code works as it does.
|
|
|
|
Hmmm. The first obvious point is that bfd_perform_relocation should
|
|
not have any tests that depend upon the flavour. It's seem like
|
|
entirely the wrong place for such a thing. The second obvious point
|
|
is that the current code ignores the reloc addend when producing
|
|
relocatable output for COFF. That's peculiar. In fact, I really
|
|
have no idea what the point of the line you want to remove is.
|
|
|
|
A typical COFF reloc subtracts the old value of the symbol and adds in
|
|
the new value to the location in the object file (if it's a pc
|
|
relative reloc it adds the difference between the symbol value and the
|
|
location). When relocating we need to preserve that property.
|
|
|
|
BFD handles this by setting the addend to the negative of the old
|
|
value of the symbol. Unfortunately it handles common symbols in a
|
|
non-standard way (it doesn't subtract the old value) but that's a
|
|
different story (we can't change it without losing backward
|
|
compatibility with old object files) (coff-i386 does subtract the old
|
|
value, to be compatible with existing coff-i386 targets, like SCO).
|
|
|
|
So everything works fine when not producing relocatable output. When
|
|
we are producing relocatable output, logically we should do exactly
|
|
what we do when not producing relocatable output. Therefore, your
|
|
patch is correct. In fact, it should probably always just set
|
|
reloc_entry->addend to 0 for all cases, since it is, in fact, going to
|
|
add the value into the object file. This won't hurt the COFF code,
|
|
which doesn't use the addend; I'm not sure what it will do to other
|
|
formats (the thing to check for would be whether any formats both use
|
|
the addend and set partial_inplace).
|
|
|
|
When I wanted to make coff-i386 produce relocatable output, I ran
|
|
into the problem that you are running into: I wanted to remove that
|
|
line. Rather than risk it, I made the coff-i386 relocs use a special
|
|
function; it's coff_i386_reloc in coff-i386.c. The function
|
|
specifically adds the addend field into the object file, knowing that
|
|
bfd_perform_relocation is not going to. If you remove that line, then
|
|
coff-i386.c will wind up adding the addend field in twice. It's
|
|
trivial to fix; it just needs to be done.
|
|
|
|
The problem with removing the line is just that it may break some
|
|
working code. With BFD it's hard to be sure of anything. The right
|
|
way to deal with this is simply to build and test at least all the
|
|
supported COFF targets. It should be straightforward if time and disk
|
|
space consuming. For each target:
|
|
1) build the linker
|
|
2) generate some executable, and link it using -r (I would
|
|
probably use paranoia.o and link against newlib/libc.a, which
|
|
for all the supported targets would be available in
|
|
/usr/cygnus/progressive/H-host/target/lib/libc.a).
|
|
3) make the change to reloc.c
|
|
4) rebuild the linker
|
|
5) repeat step 2
|
|
6) if the resulting object files are the same, you have at least
|
|
made it no worse
|
|
7) if they are different you have to figure out which version is
|
|
right
|
|
*/
|
|
relocation -= reloc_entry->addend;
|
|
reloc_entry->addend = 0;
|
|
}
|
|
else
|
|
{
|
|
reloc_entry->addend = relocation;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* FIXME: This overflow checking is incomplete, because the value
|
|
might have overflowed before we get here. For a correct check we
|
|
need to compute the value in a size larger than bitsize, but we
|
|
can't reasonably do that for a reloc the same size as a host
|
|
machine word.
|
|
FIXME: We should also do overflow checking on the result after
|
|
adding in the value contained in the object file. */
|
|
if (howto->complain_on_overflow != complain_overflow_dont
|
|
&& flag == bfd_reloc_ok)
|
|
flag = bfd_check_overflow (howto->complain_on_overflow,
|
|
howto->bitsize,
|
|
howto->rightshift,
|
|
bfd_arch_bits_per_address (abfd),
|
|
relocation);
|
|
|
|
/* Either we are relocating all the way, or we don't want to apply
|
|
the relocation to the reloc entry (probably because there isn't
|
|
any room in the output format to describe addends to relocs). */
|
|
|
|
/* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
|
|
(OSF version 1.3, compiler version 3.11). It miscompiles the
|
|
following program:
|
|
|
|
struct str
|
|
{
|
|
unsigned int i0;
|
|
} s = { 0 };
|
|
|
|
int
|
|
main ()
|
|
{
|
|
unsigned long x;
|
|
|
|
x = 0x100000000;
|
|
x <<= (unsigned long) s.i0;
|
|
if (x == 0)
|
|
printf ("failed\n");
|
|
else
|
|
printf ("succeeded (%lx)\n", x);
|
|
}
|
|
*/
|
|
|
|
relocation >>= (bfd_vma) howto->rightshift;
|
|
|
|
/* Shift everything up to where it's going to be used. */
|
|
relocation <<= (bfd_vma) howto->bitpos;
|
|
|
|
/* Wait for the day when all have the mask in them. */
|
|
|
|
/* What we do:
|
|
i instruction to be left alone
|
|
o offset within instruction
|
|
r relocation offset to apply
|
|
S src mask
|
|
D dst mask
|
|
N ~dst mask
|
|
A part 1
|
|
B part 2
|
|
R result
|
|
|
|
Do this:
|
|
(( i i i i i o o o o o from bfd_get<size>
|
|
and S S S S S) to get the size offset we want
|
|
+ r r r r r r r r r r) to get the final value to place
|
|
and D D D D D to chop to right size
|
|
-----------------------
|
|
= A A A A A
|
|
And this:
|
|
( i i i i i o o o o o from bfd_get<size>
|
|
and N N N N N ) get instruction
|
|
-----------------------
|
|
= B B B B B
|
|
|
|
And then:
|
|
( B B B B B
|
|
or A A A A A)
|
|
-----------------------
|
|
= R R R R R R R R R R put into bfd_put<size>
|
|
*/
|
|
|
|
#define DOIT(x) \
|
|
x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) + relocation) & howto->dst_mask))
|
|
|
|
switch (howto->size)
|
|
{
|
|
case 0:
|
|
{
|
|
char x = bfd_get_8 (abfd, (char *) data + octets);
|
|
DOIT (x);
|
|
bfd_put_8 (abfd, x, (unsigned char *) data + octets);
|
|
}
|
|
break;
|
|
|
|
case 1:
|
|
{
|
|
short x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
|
|
DOIT (x);
|
|
bfd_put_16 (abfd, (bfd_vma) x, (unsigned char *) data + octets);
|
|
}
|
|
break;
|
|
case 2:
|
|
{
|
|
long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
|
|
DOIT (x);
|
|
bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
|
|
}
|
|
break;
|
|
case -2:
|
|
{
|
|
long x = bfd_get_32 (abfd, (bfd_byte *) data + octets);
|
|
relocation = -relocation;
|
|
DOIT (x);
|
|
bfd_put_32 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
|
|
}
|
|
break;
|
|
|
|
case -1:
|
|
{
|
|
long x = bfd_get_16 (abfd, (bfd_byte *) data + octets);
|
|
relocation = -relocation;
|
|
DOIT (x);
|
|
bfd_put_16 (abfd, (bfd_vma) x, (bfd_byte *) data + octets);
|
|
}
|
|
break;
|
|
|
|
case 3:
|
|
/* Do nothing */
|
|
break;
|
|
|
|
case 4:
|
|
#ifdef BFD64
|
|
{
|
|
bfd_vma x = bfd_get_64 (abfd, (bfd_byte *) data + octets);
|
|
DOIT (x);
|
|
bfd_put_64 (abfd, x, (bfd_byte *) data + octets);
|
|
}
|
|
#else
|
|
abort ();
|
|
#endif
|
|
break;
|
|
default:
|
|
return bfd_reloc_other;
|
|
}
|
|
|
|
return flag;
|
|
}
|
|
|
|
/*
|
|
FUNCTION
|
|
bfd_install_relocation
|
|
|
|
SYNOPSIS
|
|
bfd_reloc_status_type bfd_install_relocation
|
|
(bfd *abfd,
|
|
arelent *reloc_entry,
|
|
void *data, bfd_vma data_start,
|
|
asection *input_section,
|
|
char **error_message);
|
|
|
|
DESCRIPTION
|
|
This looks remarkably like <<bfd_perform_relocation>>, except it
|
|
does not expect that the section contents have been filled in.
|
|
I.e., it's suitable for use when creating, rather than applying
|
|
a relocation.
|
|
|
|
For now, this function should be considered reserved for the
|
|
assembler.
|
|
*/
|
|
|
|
bfd_reloc_status_type
|
|
bfd_install_relocation (bfd *abfd,
|
|
arelent *reloc_entry,
|
|
void *data_start,
|
|
bfd_vma data_start_offset,
|
|
asection *input_section,
|
|
char **error_message)
|
|
{
|
|
bfd_vma relocation;
|
|
bfd_reloc_status_type flag = bfd_reloc_ok;
|
|
bfd_size_type octets = reloc_entry->address * bfd_octets_per_byte (abfd);
|
|
bfd_vma output_base = 0;
|
|
reloc_howto_type *howto = reloc_entry->howto;
|
|
asection *reloc_target_output_section;
|
|
asymbol *symbol;
|
|
bfd_byte *data;
|
|
|
|
symbol = *(reloc_entry->sym_ptr_ptr);
|
|
if (bfd_is_abs_section (symbol->section))
|
|
{
|
|
reloc_entry->address += input_section->output_offset;
|
|
return bfd_reloc_ok;
|
|
}
|
|
|
|
/* If there is a function supplied to handle this relocation type,
|
|
call it. It'll return `bfd_reloc_continue' if further processing
|
|
can be done. */
|
|
if (howto->special_function)
|
|
{
|
|
bfd_reloc_status_type cont;
|
|
|
|
/* XXX - The special_function calls haven't been fixed up to deal
|
|
with creating new relocations and section contents. */
|
|
cont = howto->special_function (abfd, reloc_entry, symbol,
|
|
/* XXX - Non-portable! */
|
|
((bfd_byte *) data_start
|
|
- data_start_offset),
|
|
input_section, abfd, error_message);
|
|
if (cont != bfd_reloc_continue)
|
|
return cont;
|
|
}
|
|
|
|
/* Is the address of the relocation really within the section? */
|
|
if (reloc_entry->address > bfd_get_section_limit (abfd, input_section))
|
|
return bfd_reloc_outofrange;
|
|
|
|
/* Work out which section the relocation is targeted at and the
|
|
initial relocation command value. */
|
|
|
|
/* Get symbol value. (Common symbols are special.) */
|
|
if (bfd_is_com_section (symbol->section))
|
|
relocation = 0;
|
|
else
|
|
relocation = symbol->value;
|
|
|
|
reloc_target_output_section = symbol->section->output_section;
|
|
|
|
/* Convert input-section-relative symbol value to absolute. */
|
|
if (! howto->partial_inplace)
|
|
output_base = 0;
|
|
else
|
|
output_base = reloc_target_output_section->vma;
|
|
|
|
relocation += output_base + symbol->section->output_offset;
|
|
|
|
/* Add in supplied addend. */
|
|
relocation += reloc_entry->addend;
|
|
|
|
/* Here the variable relocation holds the final address of the
|
|
symbol we are relocating against, plus any addend. */
|
|
|
|
if (howto->pc_relative)
|
|
{
|
|
/* This is a PC relative relocation. We want to set RELOCATION
|
|
to the distance between the address of the symbol and the
|
|
location. RELOCATION is already the address of the symbol.
|
|
|
|
We start by subtracting the address of the section containing
|
|
the location.
|
|
|
|
If pcrel_offset is set, we must further subtract the position
|
|
of the location within the section. Some targets arrange for
|
|
the addend to be the negative of the position of the location
|
|
within the section; for example, i386-aout does this. For
|
|
i386-aout, pcrel_offset is FALSE. Some other targets do not
|
|
include the position of the location; for example, m88kbcs,
|
|
or ELF. For those targets, pcrel_offset is TRUE.
|
|
|
|
If we are producing relocatable output, then we must ensure
|
|
that this reloc will be correctly computed when the final
|
|
relocation is done. If pcrel_offset is FALSE we want to wind
|
|
up with the negative of the location within the section,
|
|
which means we must adjust the existing addend by the change
|
|
in the location within the section. If pcrel_offset is TRUE
|
|
we do not want to adjust the existing addend at all.
|
|
|
|
FIXME: This seems logical to me, but for the case of
|
|
producing relocatable output it is not what the code
|
|
actually does. I don't want to change it, because it seems
|
|
far too likely that something will break. */
|
|
|
|
relocation -=
|
|
input_section->output_section->vma + input_section->output_offset;
|
|
|
|
if (howto->pcrel_offset && howto->partial_inplace)
|
|
relocation -= reloc_entry->address;
|
|
}
|
|
|
|
if (! howto->partial_inplace)
|
|
{
|
|
/* This is a partial relocation, and we want to apply the relocation
|
|
to the reloc entry rather than the raw data. Modify the reloc
|
|
inplace to reflect what we now know. */
|
|
reloc_entry->addend = relocation;
|
|
reloc_entry->address += input_section->output_offset;
|
|
return flag;
|
|
}
|
|
else
|
|
{
|
|
/* This is a partial relocation, but inplace, so modify the
|
|
reloc record a bit.
|
|
|
|
If we've relocated with a symbol with a section, change
|
|
into a ref to the section belonging to the symbol. */
|
|
reloc_entry->address += input_section->output_offset;
|
|
|
|
/* WTF?? */
|
|
if (abfd->xvec->flavour == bfd_target_coff_flavour
|
|
&& strcmp (abfd->xvec->name, "coff-Intel-little") != 0
|
|
&& strcmp (abfd->xvec->name, "coff-Intel-big") != 0)
|
|
{
|
|
|
|
/* For m68k-coff, the addend was being subtracted twice during
|
|
relocation with -r. Removing the line below this comment
|
|
fixes that problem; see PR 2953.
|
|
|
|
However, Ian wrote the following, regarding removing the line below,
|
|
which explains why it is still enabled: --djm
|
|
|
|
If you put a patch like that into BFD you need to check all the COFF
|
|
linkers. I am fairly certain that patch will break coff-i386 (e.g.,
|
|
SCO); see coff_i386_reloc in coff-i386.c where I worked around the
|
|
problem in a different way. There may very well be a reason that the
|
|
code works as it does.
|
|
|
|
Hmmm. The first obvious point is that bfd_install_relocation should
|
|
not have any tests that depend upon the flavour. It's seem like
|
|
entirely the wrong place for such a thing. The second obvious point
|
|
is that the current code ignores the reloc addend when producing
|
|
relocatable output for COFF. That's peculiar. In fact, I really
|
|
have no idea what the point of the line you want to remove is.
|
|
|
|
A typical COFF reloc subtracts the old value of the symbol and adds in
|
|
the new value to the location in the object file (if it's a pc
|
|
relative reloc it adds the difference between the symbol value and the
|
|
location). When relocating we need to preserve that property.
|
|
|
|
BFD handles this by setting the addend to the negative of the old
|
|
value of the symbol. Unfortunately it handles common symbols in a
|
|
non-standard way (it doesn't subtract the old value) but that's a
|
|
different story (we can't change it without losing backward
|
|
compatibility with old object files) (coff-i386 does subtract the old
|
|
value, to be compatible with existing coff-i386 targets, like SCO).
|
|
|
|
So everything works fine when not producing relocatable output. When
|
|
we are producing relocatable output, logically we should do exactly
|
|
what we do when not producing relocatable output. Therefore, your
|
|
patch is correct. In fact, it should probably always just set
|
|
reloc_entry->addend to 0 for all cases, since it is, in fact, going to
|
|
add the value into the object file. This won't hurt the COFF code,
|
|
which doesn't use the addend; I'm not sure what it will do to other
|
|
formats (the thing to check for would be whether any formats both use
|
|
the addend and set partial_inplace).
|
|
|
|
When I wanted to make coff-i386 produce relocatable output, I ran
|
|
into the problem that you are running into: I wanted to remove that
|
|
line. Rather than risk it, I made the coff-i386 relocs use a special
|
|
function; it's coff_i386_reloc in coff-i386.c. The function
|
|
specifically adds the addend field into the object file, knowing that
|
|
bfd_install_relocation is not going to. If you remove that line, then
|
|
coff-i386.c will wind up adding the addend field in twice. It's
|
|
trivial to fix; it just needs to be done.
|
|
|
|
The problem with removing the line is just that it may break some
|
|
working code. With BFD it's hard to be sure of anything. The right
|
|
way to deal with this is simply to build and test at least all the
|
|
supported COFF targets. It should be straightforward if time and disk
|
|
space consuming. For each target:
|
|
1) build the linker
|
|
2) generate some executable, and link it using -r (I would
|
|
probably use paranoia.o and link against newlib/libc.a, which
|
|
for all the supported targets would be available in
|
|
/usr/cygnus/progressive/H-host/target/lib/libc.a).
|
|
3) make the change to reloc.c
|
|
4) rebuild the linker
|
|
5) repeat step 2
|
|
6) if the resulting object files are the same, you have at least
|
|
made it no worse
|
|
7) if they are different you have to figure out which version is
|
|
right. */
|
|
relocation -= reloc_entry->addend;
|
|
/* FIXME: There should be no target specific code here... */
|
|
if (strcmp (abfd->xvec->name, "coff-z8k") != 0)
|
|
reloc_entry->addend = 0;
|
|
}
|
|
else
|
|
{
|
|
reloc_entry->addend = relocation;
|
|
}
|
|
}
|
|
|
|
/* FIXME: This overflow checking is incomplete, because the value
|
|
might have overflowed before we get here. For a correct check we
|
|
need to compute the value in a size larger than bitsize, but we
|
|
can't reasonably do that for a reloc the same size as a host
|
|
machine word.
|
|
FIXME: We should also do overflow checking on the result after
|
|
adding in the value contained in the object file. */
|
|
if (howto->complain_on_overflow != complain_overflow_dont)
|
|
flag = bfd_check_overflow (howto->complain_on_overflow,
|
|
howto->bitsize,
|
|
howto->rightshift,
|
|
bfd_arch_bits_per_address (abfd),
|
|
relocation);
|
|
|
|
/* Either we are relocating all the way, or we don't want to apply
|
|
the relocation to the reloc entry (probably because there isn't
|
|
any room in the output format to describe addends to relocs). */
|
|
|
|
/* The cast to bfd_vma avoids a bug in the Alpha OSF/1 C compiler
|
|
(OSF version 1.3, compiler version 3.11). It miscompiles the
|
|
following program:
|
|
|
|
struct str
|
|
{
|
|
unsigned int i0;
|
|
} s = { 0 };
|
|
|
|
int
|
|
main ()
|
|
{
|
|
unsigned long x;
|
|
|
|
x = 0x100000000;
|
|
x <<= (unsigned long) s.i0;
|
|
if (x == 0)
|
|
printf ("failed\n");
|
|
else
|
|
printf ("succeeded (%lx)\n", x);
|
|
}
|
|
*/
|
|
|
|
relocation >>= (bfd_vma) howto->rightshift;
|
|
|
|
/* Shift everything up to where it's going to be used. */
|
|
relocation <<= (bfd_vma) howto->bitpos;
|
|
|
|
/* Wait for the day when all have the mask in them. */
|
|
|
|
/* What we do:
|
|
i instruction to be left alone
|
|
o offset within instruction
|
|
r relocation offset to apply
|
|
S src mask
|
|
D dst mask
|
|
N ~dst mask
|
|
A part 1
|
|
B part 2
|
|
R result
|
|
|
|
Do this:
|
|
(( i i i i i o o o o o from bfd_get<size>
|
|
and S S S S S) to get the size offset we want
|
|
+ r r r r r r r r r r) to get the final value to place
|
|
and D D D D D to chop to right size
|
|
-----------------------
|
|
= A A A A A
|
|
And this:
|
|
( i i i i i o o o o o from bfd_get<size>
|
|
and N N N N N ) get instruction
|
|
-----------------------
|
|
= B B B B B
|
|
|
|
And then:
|
|
( B B B B B
|
|
or A A A A A)
|
|
-----------------------
|
|
= R R R R R R R R R R put into bfd_put<size>
|
|
*/
|
|
|
|
#define DOIT(x) \
|
|
x = ( (x & ~howto->dst_mask) | (((x & howto->src_mask) + relocation) & howto->dst_mask))
|
|
|
|
data = (bfd_byte *) data_start + (octets - data_start_offset);
|
|
|
|
switch (howto->size)
|
|
{
|
|
case 0:
|
|
{
|
|
char x = bfd_get_8 (abfd, data);
|
|
DOIT (x);
|
|
bfd_put_8 (abfd, x, data);
|
|
}
|
|
break;
|
|
|
|
case 1:
|
|
{
|
|
short x = bfd_get_16 (abfd, data);
|
|
DOIT (x);
|
|
bfd_put_16 (abfd, (bfd_vma) x, data);
|
|
}
|
|
break;
|
|
case 2:
|
|
{
|
|
long x = bfd_get_32 (abfd, data);
|
|
DOIT (x);
|
|
bfd_put_32 (abfd, (bfd_vma) x, data);
|
|
}
|
|
break;
|
|
case -2:
|
|
{
|
|
long x = bfd_get_32 (abfd, data);
|
|
relocation = -relocation;
|
|
DOIT (x);
|
|
bfd_put_32 (abfd, (bfd_vma) x, data);
|
|
}
|
|
break;
|
|
|
|
case 3:
|
|
/* Do nothing */
|
|
break;
|
|
|
|
case 4:
|
|
{
|
|
bfd_vma x = bfd_get_64 (abfd, data);
|
|
DOIT (x);
|
|
bfd_put_64 (abfd, x, data);
|
|
}
|
|
break;
|
|
default:
|
|
return bfd_reloc_other;
|
|
}
|
|
|
|
return flag;
|
|
}
|
|
|
|
/* This relocation routine is used by some of the backend linkers.
|
|
They do not construct asymbol or arelent structures, so there is no
|
|
reason for them to use bfd_perform_relocation. Also,
|
|
bfd_perform_relocation is so hacked up it is easier to write a new
|
|
function than to try to deal with it.
|
|
|
|
This routine does a final relocation. Whether it is useful for a
|
|
relocatable link depends upon how the object format defines
|
|
relocations.
|
|
|
|
FIXME: This routine ignores any special_function in the HOWTO,
|
|
since the existing special_function values have been written for
|
|
bfd_perform_relocation.
|
|
|
|
HOWTO is the reloc howto information.
|
|
INPUT_BFD is the BFD which the reloc applies to.
|
|
INPUT_SECTION is the section which the reloc applies to.
|
|
CONTENTS is the contents of the section.
|
|
ADDRESS is the address of the reloc within INPUT_SECTION.
|
|
VALUE is the value of the symbol the reloc refers to.
|
|
ADDEND is the addend of the reloc. */
|
|
|
|
bfd_reloc_status_type
|
|
_bfd_final_link_relocate (reloc_howto_type *howto,
|
|
bfd *input_bfd,
|
|
asection *input_section,
|
|
bfd_byte *contents,
|
|
bfd_vma address,
|
|
bfd_vma value,
|
|
bfd_vma addend)
|
|
{
|
|
bfd_vma relocation;
|
|
|
|
/* Sanity check the address. */
|
|
if (address > bfd_get_section_limit (input_bfd, input_section))
|
|
return bfd_reloc_outofrange;
|
|
|
|
/* This function assumes that we are dealing with a basic relocation
|
|
against a symbol. We want to compute the value of the symbol to
|
|
relocate to. This is just VALUE, the value of the symbol, plus
|
|
ADDEND, any addend associated with the reloc. */
|
|
relocation = value + addend;
|
|
|
|
/* If the relocation is PC relative, we want to set RELOCATION to
|
|
the distance between the symbol (currently in RELOCATION) and the
|
|
location we are relocating. Some targets (e.g., i386-aout)
|
|
arrange for the contents of the section to be the negative of the
|
|
offset of the location within the section; for such targets
|
|
pcrel_offset is FALSE. Other targets (e.g., m88kbcs or ELF)
|
|
simply leave the contents of the section as zero; for such
|
|
targets pcrel_offset is TRUE. If pcrel_offset is FALSE we do not
|
|
need to subtract out the offset of the location within the
|
|
section (which is just ADDRESS). */
|
|
if (howto->pc_relative)
|
|
{
|
|
relocation -= (input_section->output_section->vma
|
|
+ input_section->output_offset);
|
|
if (howto->pcrel_offset)
|
|
relocation -= address;
|
|
}
|
|
|
|
return _bfd_relocate_contents (howto, input_bfd, relocation,
|
|
contents + address);
|
|
}
|
|
|
|
/* Relocate a given location using a given value and howto. */
|
|
|
|
bfd_reloc_status_type
|
|
_bfd_relocate_contents (reloc_howto_type *howto,
|
|
bfd *input_bfd,
|
|
bfd_vma relocation,
|
|
bfd_byte *location)
|
|
{
|
|
int size;
|
|
bfd_vma x = 0;
|
|
bfd_reloc_status_type flag;
|
|
unsigned int rightshift = howto->rightshift;
|
|
unsigned int bitpos = howto->bitpos;
|
|
|
|
/* If the size is negative, negate RELOCATION. This isn't very
|
|
general. */
|
|
if (howto->size < 0)
|
|
relocation = -relocation;
|
|
|
|
/* Get the value we are going to relocate. */
|
|
size = bfd_get_reloc_size (howto);
|
|
switch (size)
|
|
{
|
|
default:
|
|
case 0:
|
|
abort ();
|
|
case 1:
|
|
x = bfd_get_8 (input_bfd, location);
|
|
break;
|
|
case 2:
|
|
x = bfd_get_16 (input_bfd, location);
|
|
break;
|
|
case 4:
|
|
x = bfd_get_32 (input_bfd, location);
|
|
break;
|
|
case 8:
|
|
#ifdef BFD64
|
|
x = bfd_get_64 (input_bfd, location);
|
|
#else
|
|
abort ();
|
|
#endif
|
|
break;
|
|
}
|
|
|
|
/* Check for overflow. FIXME: We may drop bits during the addition
|
|
which we don't check for. We must either check at every single
|
|
operation, which would be tedious, or we must do the computations
|
|
in a type larger than bfd_vma, which would be inefficient. */
|
|
flag = bfd_reloc_ok;
|
|
if (howto->complain_on_overflow != complain_overflow_dont)
|
|
{
|
|
bfd_vma addrmask, fieldmask, signmask, ss;
|
|
bfd_vma a, b, sum;
|
|
|
|
/* Get the values to be added together. For signed and unsigned
|
|
relocations, we assume that all values should be truncated to
|
|
the size of an address. For bitfields, all the bits matter.
|
|
See also bfd_check_overflow. */
|
|
fieldmask = N_ONES (howto->bitsize);
|
|
signmask = ~fieldmask;
|
|
addrmask = (N_ONES (bfd_arch_bits_per_address (input_bfd))
|
|
| (fieldmask << rightshift));
|
|
a = (relocation & addrmask) >> rightshift;
|
|
b = (x & howto->src_mask & addrmask) >> bitpos;
|
|
addrmask >>= rightshift;
|
|
|
|
switch (howto->complain_on_overflow)
|
|
{
|
|
case complain_overflow_signed:
|
|
/* If any sign bits are set, all sign bits must be set.
|
|
That is, A must be a valid negative address after
|
|
shifting. */
|
|
signmask = ~(fieldmask >> 1);
|
|
/* Fall thru */
|
|
|
|
case complain_overflow_bitfield:
|
|
/* Much like the signed check, but for a field one bit
|
|
wider. We allow a bitfield to represent numbers in the
|
|
range -2**n to 2**n-1, where n is the number of bits in the
|
|
field. Note that when bfd_vma is 32 bits, a 32-bit reloc
|
|
can't overflow, which is exactly what we want. */
|
|
ss = a & signmask;
|
|
if (ss != 0 && ss != (addrmask & signmask))
|
|
flag = bfd_reloc_overflow;
|
|
|
|
/* We only need this next bit of code if the sign bit of B
|
|
is below the sign bit of A. This would only happen if
|
|
SRC_MASK had fewer bits than BITSIZE. Note that if
|
|
SRC_MASK has more bits than BITSIZE, we can get into
|
|
trouble; we would need to verify that B is in range, as
|
|
we do for A above. */
|
|
ss = ((~howto->src_mask) >> 1) & howto->src_mask;
|
|
ss >>= bitpos;
|
|
|
|
/* Set all the bits above the sign bit. */
|
|
b = (b ^ ss) - ss;
|
|
|
|
/* Now we can do the addition. */
|
|
sum = a + b;
|
|
|
|
/* See if the result has the correct sign. Bits above the
|
|
sign bit are junk now; ignore them. If the sum is
|
|
positive, make sure we did not have all negative inputs;
|
|
if the sum is negative, make sure we did not have all
|
|
positive inputs. The test below looks only at the sign
|
|
bits, and it really just
|
|
SIGN (A) == SIGN (B) && SIGN (A) != SIGN (SUM)
|
|
|
|
We mask with addrmask here to explicitly allow an address
|
|
wrap-around. The Linux kernel relies on it, and it is
|
|
the only way to write assembler code which can run when
|
|
loaded at a location 0x80000000 away from the location at
|
|
which it is linked. */
|
|
if (((~(a ^ b)) & (a ^ sum)) & signmask & addrmask)
|
|
flag = bfd_reloc_overflow;
|
|
break;
|
|
|
|
case complain_overflow_unsigned:
|
|
/* Checking for an unsigned overflow is relatively easy:
|
|
trim the addresses and add, and trim the result as well.
|
|
Overflow is normally indicated when the result does not
|
|
fit in the field. However, we also need to consider the
|
|
case when, e.g., fieldmask is 0x7fffffff or smaller, an
|
|
input is 0x80000000, and bfd_vma is only 32 bits; then we
|
|
will get sum == 0, but there is an overflow, since the
|
|
inputs did not fit in the field. Instead of doing a
|
|
separate test, we can check for this by or-ing in the
|
|
operands when testing for the sum overflowing its final
|
|
field. */
|
|
sum = (a + b) & addrmask;
|
|
if ((a | b | sum) & signmask)
|
|
flag = bfd_reloc_overflow;
|
|
break;
|
|
|
|
default:
|
|
abort ();
|
|
}
|
|
}
|
|
|
|
/* Put RELOCATION in the right bits. */
|
|
relocation >>= (bfd_vma) rightshift;
|
|
relocation <<= (bfd_vma) bitpos;
|
|
|
|
/* Add RELOCATION to the right bits of X. */
|
|
x = ((x & ~howto->dst_mask)
|
|
| (((x & howto->src_mask) + relocation) & howto->dst_mask));
|
|
|
|
/* Put the relocated value back in the object file. */
|
|
switch (size)
|
|
{
|
|
default:
|
|
abort ();
|
|
case 1:
|
|
bfd_put_8 (input_bfd, x, location);
|
|
break;
|
|
case 2:
|
|
bfd_put_16 (input_bfd, x, location);
|
|
break;
|
|
case 4:
|
|
bfd_put_32 (input_bfd, x, location);
|
|
break;
|
|
case 8:
|
|
#ifdef BFD64
|
|
bfd_put_64 (input_bfd, x, location);
|
|
#else
|
|
abort ();
|
|
#endif
|
|
break;
|
|
}
|
|
|
|
return flag;
|
|
}
|
|
|
|
/* Clear a given location using a given howto, by applying a fixed relocation
|
|
value and discarding any in-place addend. This is used for fixed-up
|
|
relocations against discarded symbols, to make ignorable debug or unwind
|
|
information more obvious. */
|
|
|
|
void
|
|
_bfd_clear_contents (reloc_howto_type *howto,
|
|
bfd *input_bfd,
|
|
asection *input_section,
|
|
bfd_byte *location)
|
|
{
|
|
int size;
|
|
bfd_vma x = 0;
|
|
|
|
/* Get the value we are going to relocate. */
|
|
size = bfd_get_reloc_size (howto);
|
|
switch (size)
|
|
{
|
|
default:
|
|
case 0:
|
|
abort ();
|
|
case 1:
|
|
x = bfd_get_8 (input_bfd, location);
|
|
break;
|
|
case 2:
|
|
x = bfd_get_16 (input_bfd, location);
|
|
break;
|
|
case 4:
|
|
x = bfd_get_32 (input_bfd, location);
|
|
break;
|
|
case 8:
|
|
#ifdef BFD64
|
|
x = bfd_get_64 (input_bfd, location);
|
|
#else
|
|
abort ();
|
|
#endif
|
|
break;
|
|
}
|
|
|
|
/* Zero out the unwanted bits of X. */
|
|
x &= ~howto->dst_mask;
|
|
|
|
/* For a range list, use 1 instead of 0 as placeholder. 0
|
|
would terminate the list, hiding any later entries. */
|
|
if (strcmp (bfd_get_section_name (input_bfd, input_section),
|
|
".debug_ranges") == 0
|
|
&& (howto->dst_mask & 1) != 0)
|
|
x |= 1;
|
|
|
|
/* Put the relocated value back in the object file. */
|
|
switch (size)
|
|
{
|
|
default:
|
|
case 0:
|
|
abort ();
|
|
case 1:
|
|
bfd_put_8 (input_bfd, x, location);
|
|
break;
|
|
case 2:
|
|
bfd_put_16 (input_bfd, x, location);
|
|
break;
|
|
case 4:
|
|
bfd_put_32 (input_bfd, x, location);
|
|
break;
|
|
case 8:
|
|
#ifdef BFD64
|
|
bfd_put_64 (input_bfd, x, location);
|
|
#else
|
|
abort ();
|
|
#endif
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
DOCDD
|
|
INODE
|
|
howto manager, , typedef arelent, Relocations
|
|
|
|
SUBSECTION
|
|
The howto manager
|
|
|
|
When an application wants to create a relocation, but doesn't
|
|
know what the target machine might call it, it can find out by
|
|
using this bit of code.
|
|
|
|
*/
|
|
|
|
/*
|
|
TYPEDEF
|
|
bfd_reloc_code_type
|
|
|
|
DESCRIPTION
|
|
The insides of a reloc code. The idea is that, eventually, there
|
|
will be one enumerator for every type of relocation we ever do.
|
|
Pass one of these values to <<bfd_reloc_type_lookup>>, and it'll
|
|
return a howto pointer.
|
|
|
|
This does mean that the application must determine the correct
|
|
enumerator value; you can't get a howto pointer from a random set
|
|
of attributes.
|
|
|
|
SENUM
|
|
bfd_reloc_code_real
|
|
|
|
ENUM
|
|
BFD_RELOC_64
|
|
ENUMX
|
|
BFD_RELOC_32
|
|
ENUMX
|
|
BFD_RELOC_26
|
|
ENUMX
|
|
BFD_RELOC_24
|
|
ENUMX
|
|
BFD_RELOC_16
|
|
ENUMX
|
|
BFD_RELOC_14
|
|
ENUMX
|
|
BFD_RELOC_8
|
|
ENUMDOC
|
|
Basic absolute relocations of N bits.
|
|
|
|
ENUM
|
|
BFD_RELOC_64_PCREL
|
|
ENUMX
|
|
BFD_RELOC_32_PCREL
|
|
ENUMX
|
|
BFD_RELOC_24_PCREL
|
|
ENUMX
|
|
BFD_RELOC_16_PCREL
|
|
ENUMX
|
|
BFD_RELOC_12_PCREL
|
|
ENUMX
|
|
BFD_RELOC_8_PCREL
|
|
ENUMDOC
|
|
PC-relative relocations. Sometimes these are relative to the address
|
|
of the relocation itself; sometimes they are relative to the start of
|
|
the section containing the relocation. It depends on the specific target.
|
|
|
|
The 24-bit relocation is used in some Intel 960 configurations.
|
|
|
|
ENUM
|
|
BFD_RELOC_32_SECREL
|
|
ENUMDOC
|
|
Section relative relocations. Some targets need this for DWARF2.
|
|
|
|
ENUM
|
|
BFD_RELOC_32_GOT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_16_GOT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_8_GOT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_32_GOTOFF
|
|
ENUMX
|
|
BFD_RELOC_16_GOTOFF
|
|
ENUMX
|
|
BFD_RELOC_LO16_GOTOFF
|
|
ENUMX
|
|
BFD_RELOC_HI16_GOTOFF
|
|
ENUMX
|
|
BFD_RELOC_HI16_S_GOTOFF
|
|
ENUMX
|
|
BFD_RELOC_8_GOTOFF
|
|
ENUMX
|
|
BFD_RELOC_64_PLT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_32_PLT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_24_PLT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_16_PLT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_8_PLT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_64_PLTOFF
|
|
ENUMX
|
|
BFD_RELOC_32_PLTOFF
|
|
ENUMX
|
|
BFD_RELOC_16_PLTOFF
|
|
ENUMX
|
|
BFD_RELOC_LO16_PLTOFF
|
|
ENUMX
|
|
BFD_RELOC_HI16_PLTOFF
|
|
ENUMX
|
|
BFD_RELOC_HI16_S_PLTOFF
|
|
ENUMX
|
|
BFD_RELOC_8_PLTOFF
|
|
ENUMDOC
|
|
For ELF.
|
|
|
|
ENUM
|
|
BFD_RELOC_SIZE32
|
|
ENUMX
|
|
BFD_RELOC_SIZE64
|
|
ENUMDOC
|
|
Size relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_68K_GLOB_DAT
|
|
ENUMX
|
|
BFD_RELOC_68K_JMP_SLOT
|
|
ENUMX
|
|
BFD_RELOC_68K_RELATIVE
|
|
ENUMX
|
|
BFD_RELOC_68K_TLS_GD32
|
|
ENUMX
|
|
BFD_RELOC_68K_TLS_GD16
|
|
ENUMX
|
|
BFD_RELOC_68K_TLS_GD8
|
|
ENUMX
|
|
BFD_RELOC_68K_TLS_LDM32
|
|
ENUMX
|
|
BFD_RELOC_68K_TLS_LDM16
|
|
ENUMX
|
|
BFD_RELOC_68K_TLS_LDM8
|
|
ENUMX
|
|
BFD_RELOC_68K_TLS_LDO32
|
|
ENUMX
|
|
BFD_RELOC_68K_TLS_LDO16
|
|
ENUMX
|
|
BFD_RELOC_68K_TLS_LDO8
|
|
ENUMX
|
|
BFD_RELOC_68K_TLS_IE32
|
|
ENUMX
|
|
BFD_RELOC_68K_TLS_IE16
|
|
ENUMX
|
|
BFD_RELOC_68K_TLS_IE8
|
|
ENUMX
|
|
BFD_RELOC_68K_TLS_LE32
|
|
ENUMX
|
|
BFD_RELOC_68K_TLS_LE16
|
|
ENUMX
|
|
BFD_RELOC_68K_TLS_LE8
|
|
ENUMDOC
|
|
Relocations used by 68K ELF.
|
|
|
|
ENUM
|
|
BFD_RELOC_32_BASEREL
|
|
ENUMX
|
|
BFD_RELOC_16_BASEREL
|
|
ENUMX
|
|
BFD_RELOC_LO16_BASEREL
|
|
ENUMX
|
|
BFD_RELOC_HI16_BASEREL
|
|
ENUMX
|
|
BFD_RELOC_HI16_S_BASEREL
|
|
ENUMX
|
|
BFD_RELOC_8_BASEREL
|
|
ENUMX
|
|
BFD_RELOC_RVA
|
|
ENUMDOC
|
|
Linkage-table relative.
|
|
|
|
ENUM
|
|
BFD_RELOC_8_FFnn
|
|
ENUMDOC
|
|
Absolute 8-bit relocation, but used to form an address like 0xFFnn.
|
|
|
|
ENUM
|
|
BFD_RELOC_32_PCREL_S2
|
|
ENUMX
|
|
BFD_RELOC_16_PCREL_S2
|
|
ENUMX
|
|
BFD_RELOC_23_PCREL_S2
|
|
ENUMDOC
|
|
These PC-relative relocations are stored as word displacements --
|
|
i.e., byte displacements shifted right two bits. The 30-bit word
|
|
displacement (<<32_PCREL_S2>> -- 32 bits, shifted 2) is used on the
|
|
SPARC. (SPARC tools generally refer to this as <<WDISP30>>.) The
|
|
signed 16-bit displacement is used on the MIPS, and the 23-bit
|
|
displacement is used on the Alpha.
|
|
|
|
ENUM
|
|
BFD_RELOC_HI22
|
|
ENUMX
|
|
BFD_RELOC_LO10
|
|
ENUMDOC
|
|
High 22 bits and low 10 bits of 32-bit value, placed into lower bits of
|
|
the target word. These are used on the SPARC.
|
|
|
|
ENUM
|
|
BFD_RELOC_GPREL16
|
|
ENUMX
|
|
BFD_RELOC_GPREL32
|
|
ENUMDOC
|
|
For systems that allocate a Global Pointer register, these are
|
|
displacements off that register. These relocation types are
|
|
handled specially, because the value the register will have is
|
|
decided relatively late.
|
|
|
|
ENUM
|
|
BFD_RELOC_I960_CALLJ
|
|
ENUMDOC
|
|
Reloc types used for i960/b.out.
|
|
|
|
ENUM
|
|
BFD_RELOC_NONE
|
|
ENUMX
|
|
BFD_RELOC_SPARC_WDISP22
|
|
ENUMX
|
|
BFD_RELOC_SPARC22
|
|
ENUMX
|
|
BFD_RELOC_SPARC13
|
|
ENUMX
|
|
BFD_RELOC_SPARC_GOT10
|
|
ENUMX
|
|
BFD_RELOC_SPARC_GOT13
|
|
ENUMX
|
|
BFD_RELOC_SPARC_GOT22
|
|
ENUMX
|
|
BFD_RELOC_SPARC_PC10
|
|
ENUMX
|
|
BFD_RELOC_SPARC_PC22
|
|
ENUMX
|
|
BFD_RELOC_SPARC_WPLT30
|
|
ENUMX
|
|
BFD_RELOC_SPARC_COPY
|
|
ENUMX
|
|
BFD_RELOC_SPARC_GLOB_DAT
|
|
ENUMX
|
|
BFD_RELOC_SPARC_JMP_SLOT
|
|
ENUMX
|
|
BFD_RELOC_SPARC_RELATIVE
|
|
ENUMX
|
|
BFD_RELOC_SPARC_UA16
|
|
ENUMX
|
|
BFD_RELOC_SPARC_UA32
|
|
ENUMX
|
|
BFD_RELOC_SPARC_UA64
|
|
ENUMX
|
|
BFD_RELOC_SPARC_GOTDATA_HIX22
|
|
ENUMX
|
|
BFD_RELOC_SPARC_GOTDATA_LOX10
|
|
ENUMX
|
|
BFD_RELOC_SPARC_GOTDATA_OP_HIX22
|
|
ENUMX
|
|
BFD_RELOC_SPARC_GOTDATA_OP_LOX10
|
|
ENUMX
|
|
BFD_RELOC_SPARC_GOTDATA_OP
|
|
ENUMX
|
|
BFD_RELOC_SPARC_JMP_IREL
|
|
ENUMX
|
|
BFD_RELOC_SPARC_IRELATIVE
|
|
ENUMDOC
|
|
SPARC ELF relocations. There is probably some overlap with other
|
|
relocation types already defined.
|
|
|
|
ENUM
|
|
BFD_RELOC_SPARC_BASE13
|
|
ENUMX
|
|
BFD_RELOC_SPARC_BASE22
|
|
ENUMDOC
|
|
I think these are specific to SPARC a.out (e.g., Sun 4).
|
|
|
|
ENUMEQ
|
|
BFD_RELOC_SPARC_64
|
|
BFD_RELOC_64
|
|
ENUMX
|
|
BFD_RELOC_SPARC_10
|
|
ENUMX
|
|
BFD_RELOC_SPARC_11
|
|
ENUMX
|
|
BFD_RELOC_SPARC_OLO10
|
|
ENUMX
|
|
BFD_RELOC_SPARC_HH22
|
|
ENUMX
|
|
BFD_RELOC_SPARC_HM10
|
|
ENUMX
|
|
BFD_RELOC_SPARC_LM22
|
|
ENUMX
|
|
BFD_RELOC_SPARC_PC_HH22
|
|
ENUMX
|
|
BFD_RELOC_SPARC_PC_HM10
|
|
ENUMX
|
|
BFD_RELOC_SPARC_PC_LM22
|
|
ENUMX
|
|
BFD_RELOC_SPARC_WDISP16
|
|
ENUMX
|
|
BFD_RELOC_SPARC_WDISP19
|
|
ENUMX
|
|
BFD_RELOC_SPARC_7
|
|
ENUMX
|
|
BFD_RELOC_SPARC_6
|
|
ENUMX
|
|
BFD_RELOC_SPARC_5
|
|
ENUMEQX
|
|
BFD_RELOC_SPARC_DISP64
|
|
BFD_RELOC_64_PCREL
|
|
ENUMX
|
|
BFD_RELOC_SPARC_PLT32
|
|
ENUMX
|
|
BFD_RELOC_SPARC_PLT64
|
|
ENUMX
|
|
BFD_RELOC_SPARC_HIX22
|
|
ENUMX
|
|
BFD_RELOC_SPARC_LOX10
|
|
ENUMX
|
|
BFD_RELOC_SPARC_H44
|
|
ENUMX
|
|
BFD_RELOC_SPARC_M44
|
|
ENUMX
|
|
BFD_RELOC_SPARC_L44
|
|
ENUMX
|
|
BFD_RELOC_SPARC_REGISTER
|
|
ENUMX
|
|
BFD_RELOC_SPARC_H34
|
|
ENUMX
|
|
BFD_RELOC_SPARC_SIZE32
|
|
ENUMX
|
|
BFD_RELOC_SPARC_SIZE64
|
|
ENUMX
|
|
BFD_RELOC_SPARC_WDISP10
|
|
ENUMDOC
|
|
SPARC64 relocations
|
|
|
|
ENUM
|
|
BFD_RELOC_SPARC_REV32
|
|
ENUMDOC
|
|
SPARC little endian relocation
|
|
ENUM
|
|
BFD_RELOC_SPARC_TLS_GD_HI22
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_GD_LO10
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_GD_ADD
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_GD_CALL
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_LDM_HI22
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_LDM_LO10
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_LDM_ADD
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_LDM_CALL
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_LDO_HIX22
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_LDO_LOX10
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_LDO_ADD
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_IE_HI22
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_IE_LO10
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_IE_LD
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_IE_LDX
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_IE_ADD
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_LE_HIX22
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_LE_LOX10
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_DTPMOD32
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_DTPMOD64
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_DTPOFF32
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_DTPOFF64
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_TPOFF32
|
|
ENUMX
|
|
BFD_RELOC_SPARC_TLS_TPOFF64
|
|
ENUMDOC
|
|
SPARC TLS relocations
|
|
|
|
ENUM
|
|
BFD_RELOC_SPU_IMM7
|
|
ENUMX
|
|
BFD_RELOC_SPU_IMM8
|
|
ENUMX
|
|
BFD_RELOC_SPU_IMM10
|
|
ENUMX
|
|
BFD_RELOC_SPU_IMM10W
|
|
ENUMX
|
|
BFD_RELOC_SPU_IMM16
|
|
ENUMX
|
|
BFD_RELOC_SPU_IMM16W
|
|
ENUMX
|
|
BFD_RELOC_SPU_IMM18
|
|
ENUMX
|
|
BFD_RELOC_SPU_PCREL9a
|
|
ENUMX
|
|
BFD_RELOC_SPU_PCREL9b
|
|
ENUMX
|
|
BFD_RELOC_SPU_PCREL16
|
|
ENUMX
|
|
BFD_RELOC_SPU_LO16
|
|
ENUMX
|
|
BFD_RELOC_SPU_HI16
|
|
ENUMX
|
|
BFD_RELOC_SPU_PPU32
|
|
ENUMX
|
|
BFD_RELOC_SPU_PPU64
|
|
ENUMX
|
|
BFD_RELOC_SPU_ADD_PIC
|
|
ENUMDOC
|
|
SPU Relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_ALPHA_GPDISP_HI16
|
|
ENUMDOC
|
|
Alpha ECOFF and ELF relocations. Some of these treat the symbol or
|
|
"addend" in some special way.
|
|
For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
|
|
writing; when reading, it will be the absolute section symbol. The
|
|
addend is the displacement in bytes of the "lda" instruction from
|
|
the "ldah" instruction (which is at the address of this reloc).
|
|
ENUM
|
|
BFD_RELOC_ALPHA_GPDISP_LO16
|
|
ENUMDOC
|
|
For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
|
|
with GPDISP_HI16 relocs. The addend is ignored when writing the
|
|
relocations out, and is filled in with the file's GP value on
|
|
reading, for convenience.
|
|
|
|
ENUM
|
|
BFD_RELOC_ALPHA_GPDISP
|
|
ENUMDOC
|
|
The ELF GPDISP relocation is exactly the same as the GPDISP_HI16
|
|
relocation except that there is no accompanying GPDISP_LO16
|
|
relocation.
|
|
|
|
ENUM
|
|
BFD_RELOC_ALPHA_LITERAL
|
|
ENUMX
|
|
BFD_RELOC_ALPHA_ELF_LITERAL
|
|
ENUMX
|
|
BFD_RELOC_ALPHA_LITUSE
|
|
ENUMDOC
|
|
The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
|
|
the assembler turns it into a LDQ instruction to load the address of
|
|
the symbol, and then fills in a register in the real instruction.
|
|
|
|
The LITERAL reloc, at the LDQ instruction, refers to the .lita
|
|
section symbol. The addend is ignored when writing, but is filled
|
|
in with the file's GP value on reading, for convenience, as with the
|
|
GPDISP_LO16 reloc.
|
|
|
|
The ELF_LITERAL reloc is somewhere between 16_GOTOFF and GPDISP_LO16.
|
|
It should refer to the symbol to be referenced, as with 16_GOTOFF,
|
|
but it generates output not based on the position within the .got
|
|
section, but relative to the GP value chosen for the file during the
|
|
final link stage.
|
|
|
|
The LITUSE reloc, on the instruction using the loaded address, gives
|
|
information to the linker that it might be able to use to optimize
|
|
away some literal section references. The symbol is ignored (read
|
|
as the absolute section symbol), and the "addend" indicates the type
|
|
of instruction using the register:
|
|
1 - "memory" fmt insn
|
|
2 - byte-manipulation (byte offset reg)
|
|
3 - jsr (target of branch)
|
|
|
|
ENUM
|
|
BFD_RELOC_ALPHA_HINT
|
|
ENUMDOC
|
|
The HINT relocation indicates a value that should be filled into the
|
|
"hint" field of a jmp/jsr/ret instruction, for possible branch-
|
|
prediction logic which may be provided on some processors.
|
|
|
|
ENUM
|
|
BFD_RELOC_ALPHA_LINKAGE
|
|
ENUMDOC
|
|
The LINKAGE relocation outputs a linkage pair in the object file,
|
|
which is filled by the linker.
|
|
|
|
ENUM
|
|
BFD_RELOC_ALPHA_CODEADDR
|
|
ENUMDOC
|
|
The CODEADDR relocation outputs a STO_CA in the object file,
|
|
which is filled by the linker.
|
|
|
|
ENUM
|
|
BFD_RELOC_ALPHA_GPREL_HI16
|
|
ENUMX
|
|
BFD_RELOC_ALPHA_GPREL_LO16
|
|
ENUMDOC
|
|
The GPREL_HI/LO relocations together form a 32-bit offset from the
|
|
GP register.
|
|
|
|
ENUM
|
|
BFD_RELOC_ALPHA_BRSGP
|
|
ENUMDOC
|
|
Like BFD_RELOC_23_PCREL_S2, except that the source and target must
|
|
share a common GP, and the target address is adjusted for
|
|
STO_ALPHA_STD_GPLOAD.
|
|
|
|
ENUM
|
|
BFD_RELOC_ALPHA_NOP
|
|
ENUMDOC
|
|
The NOP relocation outputs a NOP if the longword displacement
|
|
between two procedure entry points is < 2^21.
|
|
|
|
ENUM
|
|
BFD_RELOC_ALPHA_BSR
|
|
ENUMDOC
|
|
The BSR relocation outputs a BSR if the longword displacement
|
|
between two procedure entry points is < 2^21.
|
|
|
|
ENUM
|
|
BFD_RELOC_ALPHA_LDA
|
|
ENUMDOC
|
|
The LDA relocation outputs a LDA if the longword displacement
|
|
between two procedure entry points is < 2^16.
|
|
|
|
ENUM
|
|
BFD_RELOC_ALPHA_BOH
|
|
ENUMDOC
|
|
The BOH relocation outputs a BSR if the longword displacement
|
|
between two procedure entry points is < 2^21, or else a hint.
|
|
|
|
ENUM
|
|
BFD_RELOC_ALPHA_TLSGD
|
|
ENUMX
|
|
BFD_RELOC_ALPHA_TLSLDM
|
|
ENUMX
|
|
BFD_RELOC_ALPHA_DTPMOD64
|
|
ENUMX
|
|
BFD_RELOC_ALPHA_GOTDTPREL16
|
|
ENUMX
|
|
BFD_RELOC_ALPHA_DTPREL64
|
|
ENUMX
|
|
BFD_RELOC_ALPHA_DTPREL_HI16
|
|
ENUMX
|
|
BFD_RELOC_ALPHA_DTPREL_LO16
|
|
ENUMX
|
|
BFD_RELOC_ALPHA_DTPREL16
|
|
ENUMX
|
|
BFD_RELOC_ALPHA_GOTTPREL16
|
|
ENUMX
|
|
BFD_RELOC_ALPHA_TPREL64
|
|
ENUMX
|
|
BFD_RELOC_ALPHA_TPREL_HI16
|
|
ENUMX
|
|
BFD_RELOC_ALPHA_TPREL_LO16
|
|
ENUMX
|
|
BFD_RELOC_ALPHA_TPREL16
|
|
ENUMDOC
|
|
Alpha thread-local storage relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_MIPS_JMP
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_JMP
|
|
ENUMDOC
|
|
The MIPS jump instruction.
|
|
|
|
ENUM
|
|
BFD_RELOC_MIPS16_JMP
|
|
ENUMDOC
|
|
The MIPS16 jump instruction.
|
|
|
|
ENUM
|
|
BFD_RELOC_MIPS16_GPREL
|
|
ENUMDOC
|
|
MIPS16 GP relative reloc.
|
|
|
|
ENUM
|
|
BFD_RELOC_HI16
|
|
ENUMDOC
|
|
High 16 bits of 32-bit value; simple reloc.
|
|
|
|
ENUM
|
|
BFD_RELOC_HI16_S
|
|
ENUMDOC
|
|
High 16 bits of 32-bit value but the low 16 bits will be sign
|
|
extended and added to form the final result. If the low 16
|
|
bits form a negative number, we need to add one to the high value
|
|
to compensate for the borrow when the low bits are added.
|
|
|
|
ENUM
|
|
BFD_RELOC_LO16
|
|
ENUMDOC
|
|
Low 16 bits.
|
|
|
|
ENUM
|
|
BFD_RELOC_HI16_PCREL
|
|
ENUMDOC
|
|
High 16 bits of 32-bit pc-relative value
|
|
ENUM
|
|
BFD_RELOC_HI16_S_PCREL
|
|
ENUMDOC
|
|
High 16 bits of 32-bit pc-relative value, adjusted
|
|
ENUM
|
|
BFD_RELOC_LO16_PCREL
|
|
ENUMDOC
|
|
Low 16 bits of pc-relative value
|
|
|
|
ENUM
|
|
BFD_RELOC_MIPS16_GOT16
|
|
ENUMX
|
|
BFD_RELOC_MIPS16_CALL16
|
|
ENUMDOC
|
|
Equivalent of BFD_RELOC_MIPS_*, but with the MIPS16 layout of
|
|
16-bit immediate fields
|
|
ENUM
|
|
BFD_RELOC_MIPS16_HI16
|
|
ENUMDOC
|
|
MIPS16 high 16 bits of 32-bit value.
|
|
ENUM
|
|
BFD_RELOC_MIPS16_HI16_S
|
|
ENUMDOC
|
|
MIPS16 high 16 bits of 32-bit value but the low 16 bits will be sign
|
|
extended and added to form the final result. If the low 16
|
|
bits form a negative number, we need to add one to the high value
|
|
to compensate for the borrow when the low bits are added.
|
|
ENUM
|
|
BFD_RELOC_MIPS16_LO16
|
|
ENUMDOC
|
|
MIPS16 low 16 bits.
|
|
|
|
ENUM
|
|
BFD_RELOC_MIPS16_TLS_GD
|
|
ENUMX
|
|
BFD_RELOC_MIPS16_TLS_LDM
|
|
ENUMX
|
|
BFD_RELOC_MIPS16_TLS_DTPREL_HI16
|
|
ENUMX
|
|
BFD_RELOC_MIPS16_TLS_DTPREL_LO16
|
|
ENUMX
|
|
BFD_RELOC_MIPS16_TLS_GOTTPREL
|
|
ENUMX
|
|
BFD_RELOC_MIPS16_TLS_TPREL_HI16
|
|
ENUMX
|
|
BFD_RELOC_MIPS16_TLS_TPREL_LO16
|
|
ENUMDOC
|
|
MIPS16 TLS relocations
|
|
|
|
ENUM
|
|
BFD_RELOC_MIPS_LITERAL
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_LITERAL
|
|
ENUMDOC
|
|
Relocation against a MIPS literal section.
|
|
|
|
ENUM
|
|
BFD_RELOC_MICROMIPS_7_PCREL_S1
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_10_PCREL_S1
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_16_PCREL_S1
|
|
ENUMDOC
|
|
microMIPS PC-relative relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_MICROMIPS_GPREL16
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_HI16
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_HI16_S
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_LO16
|
|
ENUMDOC
|
|
microMIPS versions of generic BFD relocs.
|
|
|
|
ENUM
|
|
BFD_RELOC_MIPS_GOT16
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_GOT16
|
|
ENUMX
|
|
BFD_RELOC_MIPS_CALL16
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_CALL16
|
|
ENUMX
|
|
BFD_RELOC_MIPS_GOT_HI16
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_GOT_HI16
|
|
ENUMX
|
|
BFD_RELOC_MIPS_GOT_LO16
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_GOT_LO16
|
|
ENUMX
|
|
BFD_RELOC_MIPS_CALL_HI16
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_CALL_HI16
|
|
ENUMX
|
|
BFD_RELOC_MIPS_CALL_LO16
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_CALL_LO16
|
|
ENUMX
|
|
BFD_RELOC_MIPS_SUB
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_SUB
|
|
ENUMX
|
|
BFD_RELOC_MIPS_GOT_PAGE
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_GOT_PAGE
|
|
ENUMX
|
|
BFD_RELOC_MIPS_GOT_OFST
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_GOT_OFST
|
|
ENUMX
|
|
BFD_RELOC_MIPS_GOT_DISP
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_GOT_DISP
|
|
ENUMX
|
|
BFD_RELOC_MIPS_SHIFT5
|
|
ENUMX
|
|
BFD_RELOC_MIPS_SHIFT6
|
|
ENUMX
|
|
BFD_RELOC_MIPS_INSERT_A
|
|
ENUMX
|
|
BFD_RELOC_MIPS_INSERT_B
|
|
ENUMX
|
|
BFD_RELOC_MIPS_DELETE
|
|
ENUMX
|
|
BFD_RELOC_MIPS_HIGHEST
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_HIGHEST
|
|
ENUMX
|
|
BFD_RELOC_MIPS_HIGHER
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_HIGHER
|
|
ENUMX
|
|
BFD_RELOC_MIPS_SCN_DISP
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_SCN_DISP
|
|
ENUMX
|
|
BFD_RELOC_MIPS_REL16
|
|
ENUMX
|
|
BFD_RELOC_MIPS_RELGOT
|
|
ENUMX
|
|
BFD_RELOC_MIPS_JALR
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_JALR
|
|
ENUMX
|
|
BFD_RELOC_MIPS_TLS_DTPMOD32
|
|
ENUMX
|
|
BFD_RELOC_MIPS_TLS_DTPREL32
|
|
ENUMX
|
|
BFD_RELOC_MIPS_TLS_DTPMOD64
|
|
ENUMX
|
|
BFD_RELOC_MIPS_TLS_DTPREL64
|
|
ENUMX
|
|
BFD_RELOC_MIPS_TLS_GD
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_TLS_GD
|
|
ENUMX
|
|
BFD_RELOC_MIPS_TLS_LDM
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_TLS_LDM
|
|
ENUMX
|
|
BFD_RELOC_MIPS_TLS_DTPREL_HI16
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_TLS_DTPREL_HI16
|
|
ENUMX
|
|
BFD_RELOC_MIPS_TLS_DTPREL_LO16
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_TLS_DTPREL_LO16
|
|
ENUMX
|
|
BFD_RELOC_MIPS_TLS_GOTTPREL
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_TLS_GOTTPREL
|
|
ENUMX
|
|
BFD_RELOC_MIPS_TLS_TPREL32
|
|
ENUMX
|
|
BFD_RELOC_MIPS_TLS_TPREL64
|
|
ENUMX
|
|
BFD_RELOC_MIPS_TLS_TPREL_HI16
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_TLS_TPREL_HI16
|
|
ENUMX
|
|
BFD_RELOC_MIPS_TLS_TPREL_LO16
|
|
ENUMX
|
|
BFD_RELOC_MICROMIPS_TLS_TPREL_LO16
|
|
ENUMX
|
|
BFD_RELOC_MIPS_EH
|
|
ENUMDOC
|
|
MIPS ELF relocations.
|
|
COMMENT
|
|
|
|
ENUM
|
|
BFD_RELOC_MIPS_COPY
|
|
ENUMX
|
|
BFD_RELOC_MIPS_JUMP_SLOT
|
|
ENUMDOC
|
|
MIPS ELF relocations (VxWorks and PLT extensions).
|
|
COMMENT
|
|
|
|
ENUM
|
|
BFD_RELOC_MOXIE_10_PCREL
|
|
ENUMDOC
|
|
Moxie ELF relocations.
|
|
COMMENT
|
|
|
|
ENUM
|
|
BFD_RELOC_FRV_LABEL16
|
|
ENUMX
|
|
BFD_RELOC_FRV_LABEL24
|
|
ENUMX
|
|
BFD_RELOC_FRV_LO16
|
|
ENUMX
|
|
BFD_RELOC_FRV_HI16
|
|
ENUMX
|
|
BFD_RELOC_FRV_GPREL12
|
|
ENUMX
|
|
BFD_RELOC_FRV_GPRELU12
|
|
ENUMX
|
|
BFD_RELOC_FRV_GPREL32
|
|
ENUMX
|
|
BFD_RELOC_FRV_GPRELHI
|
|
ENUMX
|
|
BFD_RELOC_FRV_GPRELLO
|
|
ENUMX
|
|
BFD_RELOC_FRV_GOT12
|
|
ENUMX
|
|
BFD_RELOC_FRV_GOTHI
|
|
ENUMX
|
|
BFD_RELOC_FRV_GOTLO
|
|
ENUMX
|
|
BFD_RELOC_FRV_FUNCDESC
|
|
ENUMX
|
|
BFD_RELOC_FRV_FUNCDESC_GOT12
|
|
ENUMX
|
|
BFD_RELOC_FRV_FUNCDESC_GOTHI
|
|
ENUMX
|
|
BFD_RELOC_FRV_FUNCDESC_GOTLO
|
|
ENUMX
|
|
BFD_RELOC_FRV_FUNCDESC_VALUE
|
|
ENUMX
|
|
BFD_RELOC_FRV_FUNCDESC_GOTOFF12
|
|
ENUMX
|
|
BFD_RELOC_FRV_FUNCDESC_GOTOFFHI
|
|
ENUMX
|
|
BFD_RELOC_FRV_FUNCDESC_GOTOFFLO
|
|
ENUMX
|
|
BFD_RELOC_FRV_GOTOFF12
|
|
ENUMX
|
|
BFD_RELOC_FRV_GOTOFFHI
|
|
ENUMX
|
|
BFD_RELOC_FRV_GOTOFFLO
|
|
ENUMX
|
|
BFD_RELOC_FRV_GETTLSOFF
|
|
ENUMX
|
|
BFD_RELOC_FRV_TLSDESC_VALUE
|
|
ENUMX
|
|
BFD_RELOC_FRV_GOTTLSDESC12
|
|
ENUMX
|
|
BFD_RELOC_FRV_GOTTLSDESCHI
|
|
ENUMX
|
|
BFD_RELOC_FRV_GOTTLSDESCLO
|
|
ENUMX
|
|
BFD_RELOC_FRV_TLSMOFF12
|
|
ENUMX
|
|
BFD_RELOC_FRV_TLSMOFFHI
|
|
ENUMX
|
|
BFD_RELOC_FRV_TLSMOFFLO
|
|
ENUMX
|
|
BFD_RELOC_FRV_GOTTLSOFF12
|
|
ENUMX
|
|
BFD_RELOC_FRV_GOTTLSOFFHI
|
|
ENUMX
|
|
BFD_RELOC_FRV_GOTTLSOFFLO
|
|
ENUMX
|
|
BFD_RELOC_FRV_TLSOFF
|
|
ENUMX
|
|
BFD_RELOC_FRV_TLSDESC_RELAX
|
|
ENUMX
|
|
BFD_RELOC_FRV_GETTLSOFF_RELAX
|
|
ENUMX
|
|
BFD_RELOC_FRV_TLSOFF_RELAX
|
|
ENUMX
|
|
BFD_RELOC_FRV_TLSMOFF
|
|
ENUMDOC
|
|
Fujitsu Frv Relocations.
|
|
COMMENT
|
|
|
|
ENUM
|
|
BFD_RELOC_MN10300_GOTOFF24
|
|
ENUMDOC
|
|
This is a 24bit GOT-relative reloc for the mn10300.
|
|
ENUM
|
|
BFD_RELOC_MN10300_GOT32
|
|
ENUMDOC
|
|
This is a 32bit GOT-relative reloc for the mn10300, offset by two bytes
|
|
in the instruction.
|
|
ENUM
|
|
BFD_RELOC_MN10300_GOT24
|
|
ENUMDOC
|
|
This is a 24bit GOT-relative reloc for the mn10300, offset by two bytes
|
|
in the instruction.
|
|
ENUM
|
|
BFD_RELOC_MN10300_GOT16
|
|
ENUMDOC
|
|
This is a 16bit GOT-relative reloc for the mn10300, offset by two bytes
|
|
in the instruction.
|
|
ENUM
|
|
BFD_RELOC_MN10300_COPY
|
|
ENUMDOC
|
|
Copy symbol at runtime.
|
|
ENUM
|
|
BFD_RELOC_MN10300_GLOB_DAT
|
|
ENUMDOC
|
|
Create GOT entry.
|
|
ENUM
|
|
BFD_RELOC_MN10300_JMP_SLOT
|
|
ENUMDOC
|
|
Create PLT entry.
|
|
ENUM
|
|
BFD_RELOC_MN10300_RELATIVE
|
|
ENUMDOC
|
|
Adjust by program base.
|
|
ENUM
|
|
BFD_RELOC_MN10300_SYM_DIFF
|
|
ENUMDOC
|
|
Together with another reloc targeted at the same location,
|
|
allows for a value that is the difference of two symbols
|
|
in the same section.
|
|
ENUM
|
|
BFD_RELOC_MN10300_ALIGN
|
|
ENUMDOC
|
|
The addend of this reloc is an alignment power that must
|
|
be honoured at the offset's location, regardless of linker
|
|
relaxation.
|
|
ENUM
|
|
BFD_RELOC_MN10300_TLS_GD
|
|
ENUMX
|
|
BFD_RELOC_MN10300_TLS_LD
|
|
ENUMX
|
|
BFD_RELOC_MN10300_TLS_LDO
|
|
ENUMX
|
|
BFD_RELOC_MN10300_TLS_GOTIE
|
|
ENUMX
|
|
BFD_RELOC_MN10300_TLS_IE
|
|
ENUMX
|
|
BFD_RELOC_MN10300_TLS_LE
|
|
ENUMX
|
|
BFD_RELOC_MN10300_TLS_DTPMOD
|
|
ENUMX
|
|
BFD_RELOC_MN10300_TLS_DTPOFF
|
|
ENUMX
|
|
BFD_RELOC_MN10300_TLS_TPOFF
|
|
ENUMDOC
|
|
Various TLS-related relocations.
|
|
ENUM
|
|
BFD_RELOC_MN10300_32_PCREL
|
|
ENUMDOC
|
|
This is a 32bit pcrel reloc for the mn10300, offset by two bytes in the
|
|
instruction.
|
|
ENUM
|
|
BFD_RELOC_MN10300_16_PCREL
|
|
ENUMDOC
|
|
This is a 16bit pcrel reloc for the mn10300, offset by two bytes in the
|
|
instruction.
|
|
COMMENT
|
|
|
|
ENUM
|
|
BFD_RELOC_386_GOT32
|
|
ENUMX
|
|
BFD_RELOC_386_PLT32
|
|
ENUMX
|
|
BFD_RELOC_386_COPY
|
|
ENUMX
|
|
BFD_RELOC_386_GLOB_DAT
|
|
ENUMX
|
|
BFD_RELOC_386_JUMP_SLOT
|
|
ENUMX
|
|
BFD_RELOC_386_RELATIVE
|
|
ENUMX
|
|
BFD_RELOC_386_GOTOFF
|
|
ENUMX
|
|
BFD_RELOC_386_GOTPC
|
|
ENUMX
|
|
BFD_RELOC_386_TLS_TPOFF
|
|
ENUMX
|
|
BFD_RELOC_386_TLS_IE
|
|
ENUMX
|
|
BFD_RELOC_386_TLS_GOTIE
|
|
ENUMX
|
|
BFD_RELOC_386_TLS_LE
|
|
ENUMX
|
|
BFD_RELOC_386_TLS_GD
|
|
ENUMX
|
|
BFD_RELOC_386_TLS_LDM
|
|
ENUMX
|
|
BFD_RELOC_386_TLS_LDO_32
|
|
ENUMX
|
|
BFD_RELOC_386_TLS_IE_32
|
|
ENUMX
|
|
BFD_RELOC_386_TLS_LE_32
|
|
ENUMX
|
|
BFD_RELOC_386_TLS_DTPMOD32
|
|
ENUMX
|
|
BFD_RELOC_386_TLS_DTPOFF32
|
|
ENUMX
|
|
BFD_RELOC_386_TLS_TPOFF32
|
|
ENUMX
|
|
BFD_RELOC_386_TLS_GOTDESC
|
|
ENUMX
|
|
BFD_RELOC_386_TLS_DESC_CALL
|
|
ENUMX
|
|
BFD_RELOC_386_TLS_DESC
|
|
ENUMX
|
|
BFD_RELOC_386_IRELATIVE
|
|
ENUMDOC
|
|
i386/elf relocations
|
|
|
|
ENUM
|
|
BFD_RELOC_X86_64_GOT32
|
|
ENUMX
|
|
BFD_RELOC_X86_64_PLT32
|
|
ENUMX
|
|
BFD_RELOC_X86_64_COPY
|
|
ENUMX
|
|
BFD_RELOC_X86_64_GLOB_DAT
|
|
ENUMX
|
|
BFD_RELOC_X86_64_JUMP_SLOT
|
|
ENUMX
|
|
BFD_RELOC_X86_64_RELATIVE
|
|
ENUMX
|
|
BFD_RELOC_X86_64_GOTPCREL
|
|
ENUMX
|
|
BFD_RELOC_X86_64_32S
|
|
ENUMX
|
|
BFD_RELOC_X86_64_DTPMOD64
|
|
ENUMX
|
|
BFD_RELOC_X86_64_DTPOFF64
|
|
ENUMX
|
|
BFD_RELOC_X86_64_TPOFF64
|
|
ENUMX
|
|
BFD_RELOC_X86_64_TLSGD
|
|
ENUMX
|
|
BFD_RELOC_X86_64_TLSLD
|
|
ENUMX
|
|
BFD_RELOC_X86_64_DTPOFF32
|
|
ENUMX
|
|
BFD_RELOC_X86_64_GOTTPOFF
|
|
ENUMX
|
|
BFD_RELOC_X86_64_TPOFF32
|
|
ENUMX
|
|
BFD_RELOC_X86_64_GOTOFF64
|
|
ENUMX
|
|
BFD_RELOC_X86_64_GOTPC32
|
|
ENUMX
|
|
BFD_RELOC_X86_64_GOT64
|
|
ENUMX
|
|
BFD_RELOC_X86_64_GOTPCREL64
|
|
ENUMX
|
|
BFD_RELOC_X86_64_GOTPC64
|
|
ENUMX
|
|
BFD_RELOC_X86_64_GOTPLT64
|
|
ENUMX
|
|
BFD_RELOC_X86_64_PLTOFF64
|
|
ENUMX
|
|
BFD_RELOC_X86_64_GOTPC32_TLSDESC
|
|
ENUMX
|
|
BFD_RELOC_X86_64_TLSDESC_CALL
|
|
ENUMX
|
|
BFD_RELOC_X86_64_TLSDESC
|
|
ENUMX
|
|
BFD_RELOC_X86_64_IRELATIVE
|
|
ENUMX
|
|
BFD_RELOC_X86_64_PC32_BND
|
|
ENUMX
|
|
BFD_RELOC_X86_64_PLT32_BND
|
|
ENUMDOC
|
|
x86-64/elf relocations
|
|
|
|
ENUM
|
|
BFD_RELOC_NS32K_IMM_8
|
|
ENUMX
|
|
BFD_RELOC_NS32K_IMM_16
|
|
ENUMX
|
|
BFD_RELOC_NS32K_IMM_32
|
|
ENUMX
|
|
BFD_RELOC_NS32K_IMM_8_PCREL
|
|
ENUMX
|
|
BFD_RELOC_NS32K_IMM_16_PCREL
|
|
ENUMX
|
|
BFD_RELOC_NS32K_IMM_32_PCREL
|
|
ENUMX
|
|
BFD_RELOC_NS32K_DISP_8
|
|
ENUMX
|
|
BFD_RELOC_NS32K_DISP_16
|
|
ENUMX
|
|
BFD_RELOC_NS32K_DISP_32
|
|
ENUMX
|
|
BFD_RELOC_NS32K_DISP_8_PCREL
|
|
ENUMX
|
|
BFD_RELOC_NS32K_DISP_16_PCREL
|
|
ENUMX
|
|
BFD_RELOC_NS32K_DISP_32_PCREL
|
|
ENUMDOC
|
|
ns32k relocations
|
|
|
|
ENUM
|
|
BFD_RELOC_PDP11_DISP_8_PCREL
|
|
ENUMX
|
|
BFD_RELOC_PDP11_DISP_6_PCREL
|
|
ENUMDOC
|
|
PDP11 relocations
|
|
|
|
ENUM
|
|
BFD_RELOC_PJ_CODE_HI16
|
|
ENUMX
|
|
BFD_RELOC_PJ_CODE_LO16
|
|
ENUMX
|
|
BFD_RELOC_PJ_CODE_DIR16
|
|
ENUMX
|
|
BFD_RELOC_PJ_CODE_DIR32
|
|
ENUMX
|
|
BFD_RELOC_PJ_CODE_REL16
|
|
ENUMX
|
|
BFD_RELOC_PJ_CODE_REL32
|
|
ENUMDOC
|
|
Picojava relocs. Not all of these appear in object files.
|
|
|
|
ENUM
|
|
BFD_RELOC_PPC_B26
|
|
ENUMX
|
|
BFD_RELOC_PPC_BA26
|
|
ENUMX
|
|
BFD_RELOC_PPC_TOC16
|
|
ENUMX
|
|
BFD_RELOC_PPC_B16
|
|
ENUMX
|
|
BFD_RELOC_PPC_B16_BRTAKEN
|
|
ENUMX
|
|
BFD_RELOC_PPC_B16_BRNTAKEN
|
|
ENUMX
|
|
BFD_RELOC_PPC_BA16
|
|
ENUMX
|
|
BFD_RELOC_PPC_BA16_BRTAKEN
|
|
ENUMX
|
|
BFD_RELOC_PPC_BA16_BRNTAKEN
|
|
ENUMX
|
|
BFD_RELOC_PPC_COPY
|
|
ENUMX
|
|
BFD_RELOC_PPC_GLOB_DAT
|
|
ENUMX
|
|
BFD_RELOC_PPC_JMP_SLOT
|
|
ENUMX
|
|
BFD_RELOC_PPC_RELATIVE
|
|
ENUMX
|
|
BFD_RELOC_PPC_LOCAL24PC
|
|
ENUMX
|
|
BFD_RELOC_PPC_EMB_NADDR32
|
|
ENUMX
|
|
BFD_RELOC_PPC_EMB_NADDR16
|
|
ENUMX
|
|
BFD_RELOC_PPC_EMB_NADDR16_LO
|
|
ENUMX
|
|
BFD_RELOC_PPC_EMB_NADDR16_HI
|
|
ENUMX
|
|
BFD_RELOC_PPC_EMB_NADDR16_HA
|
|
ENUMX
|
|
BFD_RELOC_PPC_EMB_SDAI16
|
|
ENUMX
|
|
BFD_RELOC_PPC_EMB_SDA2I16
|
|
ENUMX
|
|
BFD_RELOC_PPC_EMB_SDA2REL
|
|
ENUMX
|
|
BFD_RELOC_PPC_EMB_SDA21
|
|
ENUMX
|
|
BFD_RELOC_PPC_EMB_MRKREF
|
|
ENUMX
|
|
BFD_RELOC_PPC_EMB_RELSEC16
|
|
ENUMX
|
|
BFD_RELOC_PPC_EMB_RELST_LO
|
|
ENUMX
|
|
BFD_RELOC_PPC_EMB_RELST_HI
|
|
ENUMX
|
|
BFD_RELOC_PPC_EMB_RELST_HA
|
|
ENUMX
|
|
BFD_RELOC_PPC_EMB_BIT_FLD
|
|
ENUMX
|
|
BFD_RELOC_PPC_EMB_RELSDA
|
|
ENUMX
|
|
BFD_RELOC_PPC_VLE_REL8
|
|
ENUMX
|
|
BFD_RELOC_PPC_VLE_REL15
|
|
ENUMX
|
|
BFD_RELOC_PPC_VLE_REL24
|
|
ENUMX
|
|
BFD_RELOC_PPC_VLE_LO16A
|
|
ENUMX
|
|
BFD_RELOC_PPC_VLE_LO16D
|
|
ENUMX
|
|
BFD_RELOC_PPC_VLE_HI16A
|
|
ENUMX
|
|
BFD_RELOC_PPC_VLE_HI16D
|
|
ENUMX
|
|
BFD_RELOC_PPC_VLE_HA16A
|
|
ENUMX
|
|
BFD_RELOC_PPC_VLE_HA16D
|
|
ENUMX
|
|
BFD_RELOC_PPC_VLE_SDA21
|
|
ENUMX
|
|
BFD_RELOC_PPC_VLE_SDA21_LO
|
|
ENUMX
|
|
BFD_RELOC_PPC_VLE_SDAREL_LO16A
|
|
ENUMX
|
|
BFD_RELOC_PPC_VLE_SDAREL_LO16D
|
|
ENUMX
|
|
BFD_RELOC_PPC_VLE_SDAREL_HI16A
|
|
ENUMX
|
|
BFD_RELOC_PPC_VLE_SDAREL_HI16D
|
|
ENUMX
|
|
BFD_RELOC_PPC_VLE_SDAREL_HA16A
|
|
ENUMX
|
|
BFD_RELOC_PPC_VLE_SDAREL_HA16D
|
|
ENUMX
|
|
BFD_RELOC_PPC64_HIGHER
|
|
ENUMX
|
|
BFD_RELOC_PPC64_HIGHER_S
|
|
ENUMX
|
|
BFD_RELOC_PPC64_HIGHEST
|
|
ENUMX
|
|
BFD_RELOC_PPC64_HIGHEST_S
|
|
ENUMX
|
|
BFD_RELOC_PPC64_TOC16_LO
|
|
ENUMX
|
|
BFD_RELOC_PPC64_TOC16_HI
|
|
ENUMX
|
|
BFD_RELOC_PPC64_TOC16_HA
|
|
ENUMX
|
|
BFD_RELOC_PPC64_TOC
|
|
ENUMX
|
|
BFD_RELOC_PPC64_PLTGOT16
|
|
ENUMX
|
|
BFD_RELOC_PPC64_PLTGOT16_LO
|
|
ENUMX
|
|
BFD_RELOC_PPC64_PLTGOT16_HI
|
|
ENUMX
|
|
BFD_RELOC_PPC64_PLTGOT16_HA
|
|
ENUMX
|
|
BFD_RELOC_PPC64_ADDR16_DS
|
|
ENUMX
|
|
BFD_RELOC_PPC64_ADDR16_LO_DS
|
|
ENUMX
|
|
BFD_RELOC_PPC64_GOT16_DS
|
|
ENUMX
|
|
BFD_RELOC_PPC64_GOT16_LO_DS
|
|
ENUMX
|
|
BFD_RELOC_PPC64_PLT16_LO_DS
|
|
ENUMX
|
|
BFD_RELOC_PPC64_SECTOFF_DS
|
|
ENUMX
|
|
BFD_RELOC_PPC64_SECTOFF_LO_DS
|
|
ENUMX
|
|
BFD_RELOC_PPC64_TOC16_DS
|
|
ENUMX
|
|
BFD_RELOC_PPC64_TOC16_LO_DS
|
|
ENUMX
|
|
BFD_RELOC_PPC64_PLTGOT16_DS
|
|
ENUMX
|
|
BFD_RELOC_PPC64_PLTGOT16_LO_DS
|
|
ENUMX
|
|
BFD_RELOC_PPC64_ADDR16_HIGH
|
|
ENUMX
|
|
BFD_RELOC_PPC64_ADDR16_HIGHA
|
|
ENUMX
|
|
BFD_RELOC_PPC64_ADDR64_LOCAL
|
|
ENUMDOC
|
|
Power(rs6000) and PowerPC relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_PPC_TLS
|
|
ENUMX
|
|
BFD_RELOC_PPC_TLSGD
|
|
ENUMX
|
|
BFD_RELOC_PPC_TLSLD
|
|
ENUMX
|
|
BFD_RELOC_PPC_DTPMOD
|
|
ENUMX
|
|
BFD_RELOC_PPC_TPREL16
|
|
ENUMX
|
|
BFD_RELOC_PPC_TPREL16_LO
|
|
ENUMX
|
|
BFD_RELOC_PPC_TPREL16_HI
|
|
ENUMX
|
|
BFD_RELOC_PPC_TPREL16_HA
|
|
ENUMX
|
|
BFD_RELOC_PPC_TPREL
|
|
ENUMX
|
|
BFD_RELOC_PPC_DTPREL16
|
|
ENUMX
|
|
BFD_RELOC_PPC_DTPREL16_LO
|
|
ENUMX
|
|
BFD_RELOC_PPC_DTPREL16_HI
|
|
ENUMX
|
|
BFD_RELOC_PPC_DTPREL16_HA
|
|
ENUMX
|
|
BFD_RELOC_PPC_DTPREL
|
|
ENUMX
|
|
BFD_RELOC_PPC_GOT_TLSGD16
|
|
ENUMX
|
|
BFD_RELOC_PPC_GOT_TLSGD16_LO
|
|
ENUMX
|
|
BFD_RELOC_PPC_GOT_TLSGD16_HI
|
|
ENUMX
|
|
BFD_RELOC_PPC_GOT_TLSGD16_HA
|
|
ENUMX
|
|
BFD_RELOC_PPC_GOT_TLSLD16
|
|
ENUMX
|
|
BFD_RELOC_PPC_GOT_TLSLD16_LO
|
|
ENUMX
|
|
BFD_RELOC_PPC_GOT_TLSLD16_HI
|
|
ENUMX
|
|
BFD_RELOC_PPC_GOT_TLSLD16_HA
|
|
ENUMX
|
|
BFD_RELOC_PPC_GOT_TPREL16
|
|
ENUMX
|
|
BFD_RELOC_PPC_GOT_TPREL16_LO
|
|
ENUMX
|
|
BFD_RELOC_PPC_GOT_TPREL16_HI
|
|
ENUMX
|
|
BFD_RELOC_PPC_GOT_TPREL16_HA
|
|
ENUMX
|
|
BFD_RELOC_PPC_GOT_DTPREL16
|
|
ENUMX
|
|
BFD_RELOC_PPC_GOT_DTPREL16_LO
|
|
ENUMX
|
|
BFD_RELOC_PPC_GOT_DTPREL16_HI
|
|
ENUMX
|
|
BFD_RELOC_PPC_GOT_DTPREL16_HA
|
|
ENUMX
|
|
BFD_RELOC_PPC64_TPREL16_DS
|
|
ENUMX
|
|
BFD_RELOC_PPC64_TPREL16_LO_DS
|
|
ENUMX
|
|
BFD_RELOC_PPC64_TPREL16_HIGHER
|
|
ENUMX
|
|
BFD_RELOC_PPC64_TPREL16_HIGHERA
|
|
ENUMX
|
|
BFD_RELOC_PPC64_TPREL16_HIGHEST
|
|
ENUMX
|
|
BFD_RELOC_PPC64_TPREL16_HIGHESTA
|
|
ENUMX
|
|
BFD_RELOC_PPC64_DTPREL16_DS
|
|
ENUMX
|
|
BFD_RELOC_PPC64_DTPREL16_LO_DS
|
|
ENUMX
|
|
BFD_RELOC_PPC64_DTPREL16_HIGHER
|
|
ENUMX
|
|
BFD_RELOC_PPC64_DTPREL16_HIGHERA
|
|
ENUMX
|
|
BFD_RELOC_PPC64_DTPREL16_HIGHEST
|
|
ENUMX
|
|
BFD_RELOC_PPC64_DTPREL16_HIGHESTA
|
|
ENUMX
|
|
BFD_RELOC_PPC64_TPREL16_HIGH
|
|
ENUMX
|
|
BFD_RELOC_PPC64_TPREL16_HIGHA
|
|
ENUMX
|
|
BFD_RELOC_PPC64_DTPREL16_HIGH
|
|
ENUMX
|
|
BFD_RELOC_PPC64_DTPREL16_HIGHA
|
|
ENUMDOC
|
|
PowerPC and PowerPC64 thread-local storage relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_I370_D12
|
|
ENUMDOC
|
|
IBM 370/390 relocations
|
|
|
|
ENUM
|
|
BFD_RELOC_CTOR
|
|
ENUMDOC
|
|
The type of reloc used to build a constructor table - at the moment
|
|
probably a 32 bit wide absolute relocation, but the target can choose.
|
|
It generally does map to one of the other relocation types.
|
|
|
|
ENUM
|
|
BFD_RELOC_ARM_PCREL_BRANCH
|
|
ENUMDOC
|
|
ARM 26 bit pc-relative branch. The lowest two bits must be zero and are
|
|
not stored in the instruction.
|
|
ENUM
|
|
BFD_RELOC_ARM_PCREL_BLX
|
|
ENUMDOC
|
|
ARM 26 bit pc-relative branch. The lowest bit must be zero and is
|
|
not stored in the instruction. The 2nd lowest bit comes from a 1 bit
|
|
field in the instruction.
|
|
ENUM
|
|
BFD_RELOC_THUMB_PCREL_BLX
|
|
ENUMDOC
|
|
Thumb 22 bit pc-relative branch. The lowest bit must be zero and is
|
|
not stored in the instruction. The 2nd lowest bit comes from a 1 bit
|
|
field in the instruction.
|
|
ENUM
|
|
BFD_RELOC_ARM_PCREL_CALL
|
|
ENUMDOC
|
|
ARM 26-bit pc-relative branch for an unconditional BL or BLX instruction.
|
|
ENUM
|
|
BFD_RELOC_ARM_PCREL_JUMP
|
|
ENUMDOC
|
|
ARM 26-bit pc-relative branch for B or conditional BL instruction.
|
|
|
|
ENUM
|
|
BFD_RELOC_THUMB_PCREL_BRANCH7
|
|
ENUMX
|
|
BFD_RELOC_THUMB_PCREL_BRANCH9
|
|
ENUMX
|
|
BFD_RELOC_THUMB_PCREL_BRANCH12
|
|
ENUMX
|
|
BFD_RELOC_THUMB_PCREL_BRANCH20
|
|
ENUMX
|
|
BFD_RELOC_THUMB_PCREL_BRANCH23
|
|
ENUMX
|
|
BFD_RELOC_THUMB_PCREL_BRANCH25
|
|
ENUMDOC
|
|
Thumb 7-, 9-, 12-, 20-, 23-, and 25-bit pc-relative branches.
|
|
The lowest bit must be zero and is not stored in the instruction.
|
|
Note that the corresponding ELF R_ARM_THM_JUMPnn constant has an
|
|
"nn" one smaller in all cases. Note further that BRANCH23
|
|
corresponds to R_ARM_THM_CALL.
|
|
|
|
ENUM
|
|
BFD_RELOC_ARM_OFFSET_IMM
|
|
ENUMDOC
|
|
12-bit immediate offset, used in ARM-format ldr and str instructions.
|
|
|
|
ENUM
|
|
BFD_RELOC_ARM_THUMB_OFFSET
|
|
ENUMDOC
|
|
5-bit immediate offset, used in Thumb-format ldr and str instructions.
|
|
|
|
ENUM
|
|
BFD_RELOC_ARM_TARGET1
|
|
ENUMDOC
|
|
Pc-relative or absolute relocation depending on target. Used for
|
|
entries in .init_array sections.
|
|
ENUM
|
|
BFD_RELOC_ARM_ROSEGREL32
|
|
ENUMDOC
|
|
Read-only segment base relative address.
|
|
ENUM
|
|
BFD_RELOC_ARM_SBREL32
|
|
ENUMDOC
|
|
Data segment base relative address.
|
|
ENUM
|
|
BFD_RELOC_ARM_TARGET2
|
|
ENUMDOC
|
|
This reloc is used for references to RTTI data from exception handling
|
|
tables. The actual definition depends on the target. It may be a
|
|
pc-relative or some form of GOT-indirect relocation.
|
|
ENUM
|
|
BFD_RELOC_ARM_PREL31
|
|
ENUMDOC
|
|
31-bit PC relative address.
|
|
ENUM
|
|
BFD_RELOC_ARM_MOVW
|
|
ENUMX
|
|
BFD_RELOC_ARM_MOVT
|
|
ENUMX
|
|
BFD_RELOC_ARM_MOVW_PCREL
|
|
ENUMX
|
|
BFD_RELOC_ARM_MOVT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_ARM_THUMB_MOVW
|
|
ENUMX
|
|
BFD_RELOC_ARM_THUMB_MOVT
|
|
ENUMX
|
|
BFD_RELOC_ARM_THUMB_MOVW_PCREL
|
|
ENUMX
|
|
BFD_RELOC_ARM_THUMB_MOVT_PCREL
|
|
ENUMDOC
|
|
Low and High halfword relocations for MOVW and MOVT instructions.
|
|
|
|
ENUM
|
|
BFD_RELOC_ARM_JUMP_SLOT
|
|
ENUMX
|
|
BFD_RELOC_ARM_GLOB_DAT
|
|
ENUMX
|
|
BFD_RELOC_ARM_GOT32
|
|
ENUMX
|
|
BFD_RELOC_ARM_PLT32
|
|
ENUMX
|
|
BFD_RELOC_ARM_RELATIVE
|
|
ENUMX
|
|
BFD_RELOC_ARM_GOTOFF
|
|
ENUMX
|
|
BFD_RELOC_ARM_GOTPC
|
|
ENUMX
|
|
BFD_RELOC_ARM_GOT_PREL
|
|
ENUMDOC
|
|
Relocations for setting up GOTs and PLTs for shared libraries.
|
|
|
|
ENUM
|
|
BFD_RELOC_ARM_TLS_GD32
|
|
ENUMX
|
|
BFD_RELOC_ARM_TLS_LDO32
|
|
ENUMX
|
|
BFD_RELOC_ARM_TLS_LDM32
|
|
ENUMX
|
|
BFD_RELOC_ARM_TLS_DTPOFF32
|
|
ENUMX
|
|
BFD_RELOC_ARM_TLS_DTPMOD32
|
|
ENUMX
|
|
BFD_RELOC_ARM_TLS_TPOFF32
|
|
ENUMX
|
|
BFD_RELOC_ARM_TLS_IE32
|
|
ENUMX
|
|
BFD_RELOC_ARM_TLS_LE32
|
|
ENUMX
|
|
BFD_RELOC_ARM_TLS_GOTDESC
|
|
ENUMX
|
|
BFD_RELOC_ARM_TLS_CALL
|
|
ENUMX
|
|
BFD_RELOC_ARM_THM_TLS_CALL
|
|
ENUMX
|
|
BFD_RELOC_ARM_TLS_DESCSEQ
|
|
ENUMX
|
|
BFD_RELOC_ARM_THM_TLS_DESCSEQ
|
|
ENUMX
|
|
BFD_RELOC_ARM_TLS_DESC
|
|
ENUMDOC
|
|
ARM thread-local storage relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_ARM_ALU_PC_G0_NC
|
|
ENUMX
|
|
BFD_RELOC_ARM_ALU_PC_G0
|
|
ENUMX
|
|
BFD_RELOC_ARM_ALU_PC_G1_NC
|
|
ENUMX
|
|
BFD_RELOC_ARM_ALU_PC_G1
|
|
ENUMX
|
|
BFD_RELOC_ARM_ALU_PC_G2
|
|
ENUMX
|
|
BFD_RELOC_ARM_LDR_PC_G0
|
|
ENUMX
|
|
BFD_RELOC_ARM_LDR_PC_G1
|
|
ENUMX
|
|
BFD_RELOC_ARM_LDR_PC_G2
|
|
ENUMX
|
|
BFD_RELOC_ARM_LDRS_PC_G0
|
|
ENUMX
|
|
BFD_RELOC_ARM_LDRS_PC_G1
|
|
ENUMX
|
|
BFD_RELOC_ARM_LDRS_PC_G2
|
|
ENUMX
|
|
BFD_RELOC_ARM_LDC_PC_G0
|
|
ENUMX
|
|
BFD_RELOC_ARM_LDC_PC_G1
|
|
ENUMX
|
|
BFD_RELOC_ARM_LDC_PC_G2
|
|
ENUMX
|
|
BFD_RELOC_ARM_ALU_SB_G0_NC
|
|
ENUMX
|
|
BFD_RELOC_ARM_ALU_SB_G0
|
|
ENUMX
|
|
BFD_RELOC_ARM_ALU_SB_G1_NC
|
|
ENUMX
|
|
BFD_RELOC_ARM_ALU_SB_G1
|
|
ENUMX
|
|
BFD_RELOC_ARM_ALU_SB_G2
|
|
ENUMX
|
|
BFD_RELOC_ARM_LDR_SB_G0
|
|
ENUMX
|
|
BFD_RELOC_ARM_LDR_SB_G1
|
|
ENUMX
|
|
BFD_RELOC_ARM_LDR_SB_G2
|
|
ENUMX
|
|
BFD_RELOC_ARM_LDRS_SB_G0
|
|
ENUMX
|
|
BFD_RELOC_ARM_LDRS_SB_G1
|
|
ENUMX
|
|
BFD_RELOC_ARM_LDRS_SB_G2
|
|
ENUMX
|
|
BFD_RELOC_ARM_LDC_SB_G0
|
|
ENUMX
|
|
BFD_RELOC_ARM_LDC_SB_G1
|
|
ENUMX
|
|
BFD_RELOC_ARM_LDC_SB_G2
|
|
ENUMDOC
|
|
ARM group relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_ARM_V4BX
|
|
ENUMDOC
|
|
Annotation of BX instructions.
|
|
|
|
ENUM
|
|
BFD_RELOC_ARM_IRELATIVE
|
|
ENUMDOC
|
|
ARM support for STT_GNU_IFUNC.
|
|
|
|
ENUM
|
|
BFD_RELOC_ARM_IMMEDIATE
|
|
ENUMX
|
|
BFD_RELOC_ARM_ADRL_IMMEDIATE
|
|
ENUMX
|
|
BFD_RELOC_ARM_T32_IMMEDIATE
|
|
ENUMX
|
|
BFD_RELOC_ARM_T32_ADD_IMM
|
|
ENUMX
|
|
BFD_RELOC_ARM_T32_IMM12
|
|
ENUMX
|
|
BFD_RELOC_ARM_T32_ADD_PC12
|
|
ENUMX
|
|
BFD_RELOC_ARM_SHIFT_IMM
|
|
ENUMX
|
|
BFD_RELOC_ARM_SMC
|
|
ENUMX
|
|
BFD_RELOC_ARM_HVC
|
|
ENUMX
|
|
BFD_RELOC_ARM_SWI
|
|
ENUMX
|
|
BFD_RELOC_ARM_MULTI
|
|
ENUMX
|
|
BFD_RELOC_ARM_CP_OFF_IMM
|
|
ENUMX
|
|
BFD_RELOC_ARM_CP_OFF_IMM_S2
|
|
ENUMX
|
|
BFD_RELOC_ARM_T32_CP_OFF_IMM
|
|
ENUMX
|
|
BFD_RELOC_ARM_T32_CP_OFF_IMM_S2
|
|
ENUMX
|
|
BFD_RELOC_ARM_ADR_IMM
|
|
ENUMX
|
|
BFD_RELOC_ARM_LDR_IMM
|
|
ENUMX
|
|
BFD_RELOC_ARM_LITERAL
|
|
ENUMX
|
|
BFD_RELOC_ARM_IN_POOL
|
|
ENUMX
|
|
BFD_RELOC_ARM_OFFSET_IMM8
|
|
ENUMX
|
|
BFD_RELOC_ARM_T32_OFFSET_U8
|
|
ENUMX
|
|
BFD_RELOC_ARM_T32_OFFSET_IMM
|
|
ENUMX
|
|
BFD_RELOC_ARM_HWLITERAL
|
|
ENUMX
|
|
BFD_RELOC_ARM_THUMB_ADD
|
|
ENUMX
|
|
BFD_RELOC_ARM_THUMB_IMM
|
|
ENUMX
|
|
BFD_RELOC_ARM_THUMB_SHIFT
|
|
ENUMDOC
|
|
These relocs are only used within the ARM assembler. They are not
|
|
(at present) written to any object files.
|
|
|
|
ENUM
|
|
BFD_RELOC_SH_PCDISP8BY2
|
|
ENUMX
|
|
BFD_RELOC_SH_PCDISP12BY2
|
|
ENUMX
|
|
BFD_RELOC_SH_IMM3
|
|
ENUMX
|
|
BFD_RELOC_SH_IMM3U
|
|
ENUMX
|
|
BFD_RELOC_SH_DISP12
|
|
ENUMX
|
|
BFD_RELOC_SH_DISP12BY2
|
|
ENUMX
|
|
BFD_RELOC_SH_DISP12BY4
|
|
ENUMX
|
|
BFD_RELOC_SH_DISP12BY8
|
|
ENUMX
|
|
BFD_RELOC_SH_DISP20
|
|
ENUMX
|
|
BFD_RELOC_SH_DISP20BY8
|
|
ENUMX
|
|
BFD_RELOC_SH_IMM4
|
|
ENUMX
|
|
BFD_RELOC_SH_IMM4BY2
|
|
ENUMX
|
|
BFD_RELOC_SH_IMM4BY4
|
|
ENUMX
|
|
BFD_RELOC_SH_IMM8
|
|
ENUMX
|
|
BFD_RELOC_SH_IMM8BY2
|
|
ENUMX
|
|
BFD_RELOC_SH_IMM8BY4
|
|
ENUMX
|
|
BFD_RELOC_SH_PCRELIMM8BY2
|
|
ENUMX
|
|
BFD_RELOC_SH_PCRELIMM8BY4
|
|
ENUMX
|
|
BFD_RELOC_SH_SWITCH16
|
|
ENUMX
|
|
BFD_RELOC_SH_SWITCH32
|
|
ENUMX
|
|
BFD_RELOC_SH_USES
|
|
ENUMX
|
|
BFD_RELOC_SH_COUNT
|
|
ENUMX
|
|
BFD_RELOC_SH_ALIGN
|
|
ENUMX
|
|
BFD_RELOC_SH_CODE
|
|
ENUMX
|
|
BFD_RELOC_SH_DATA
|
|
ENUMX
|
|
BFD_RELOC_SH_LABEL
|
|
ENUMX
|
|
BFD_RELOC_SH_LOOP_START
|
|
ENUMX
|
|
BFD_RELOC_SH_LOOP_END
|
|
ENUMX
|
|
BFD_RELOC_SH_COPY
|
|
ENUMX
|
|
BFD_RELOC_SH_GLOB_DAT
|
|
ENUMX
|
|
BFD_RELOC_SH_JMP_SLOT
|
|
ENUMX
|
|
BFD_RELOC_SH_RELATIVE
|
|
ENUMX
|
|
BFD_RELOC_SH_GOTPC
|
|
ENUMX
|
|
BFD_RELOC_SH_GOT_LOW16
|
|
ENUMX
|
|
BFD_RELOC_SH_GOT_MEDLOW16
|
|
ENUMX
|
|
BFD_RELOC_SH_GOT_MEDHI16
|
|
ENUMX
|
|
BFD_RELOC_SH_GOT_HI16
|
|
ENUMX
|
|
BFD_RELOC_SH_GOTPLT_LOW16
|
|
ENUMX
|
|
BFD_RELOC_SH_GOTPLT_MEDLOW16
|
|
ENUMX
|
|
BFD_RELOC_SH_GOTPLT_MEDHI16
|
|
ENUMX
|
|
BFD_RELOC_SH_GOTPLT_HI16
|
|
ENUMX
|
|
BFD_RELOC_SH_PLT_LOW16
|
|
ENUMX
|
|
BFD_RELOC_SH_PLT_MEDLOW16
|
|
ENUMX
|
|
BFD_RELOC_SH_PLT_MEDHI16
|
|
ENUMX
|
|
BFD_RELOC_SH_PLT_HI16
|
|
ENUMX
|
|
BFD_RELOC_SH_GOTOFF_LOW16
|
|
ENUMX
|
|
BFD_RELOC_SH_GOTOFF_MEDLOW16
|
|
ENUMX
|
|
BFD_RELOC_SH_GOTOFF_MEDHI16
|
|
ENUMX
|
|
BFD_RELOC_SH_GOTOFF_HI16
|
|
ENUMX
|
|
BFD_RELOC_SH_GOTPC_LOW16
|
|
ENUMX
|
|
BFD_RELOC_SH_GOTPC_MEDLOW16
|
|
ENUMX
|
|
BFD_RELOC_SH_GOTPC_MEDHI16
|
|
ENUMX
|
|
BFD_RELOC_SH_GOTPC_HI16
|
|
ENUMX
|
|
BFD_RELOC_SH_COPY64
|
|
ENUMX
|
|
BFD_RELOC_SH_GLOB_DAT64
|
|
ENUMX
|
|
BFD_RELOC_SH_JMP_SLOT64
|
|
ENUMX
|
|
BFD_RELOC_SH_RELATIVE64
|
|
ENUMX
|
|
BFD_RELOC_SH_GOT10BY4
|
|
ENUMX
|
|
BFD_RELOC_SH_GOT10BY8
|
|
ENUMX
|
|
BFD_RELOC_SH_GOTPLT10BY4
|
|
ENUMX
|
|
BFD_RELOC_SH_GOTPLT10BY8
|
|
ENUMX
|
|
BFD_RELOC_SH_GOTPLT32
|
|
ENUMX
|
|
BFD_RELOC_SH_SHMEDIA_CODE
|
|
ENUMX
|
|
BFD_RELOC_SH_IMMU5
|
|
ENUMX
|
|
BFD_RELOC_SH_IMMS6
|
|
ENUMX
|
|
BFD_RELOC_SH_IMMS6BY32
|
|
ENUMX
|
|
BFD_RELOC_SH_IMMU6
|
|
ENUMX
|
|
BFD_RELOC_SH_IMMS10
|
|
ENUMX
|
|
BFD_RELOC_SH_IMMS10BY2
|
|
ENUMX
|
|
BFD_RELOC_SH_IMMS10BY4
|
|
ENUMX
|
|
BFD_RELOC_SH_IMMS10BY8
|
|
ENUMX
|
|
BFD_RELOC_SH_IMMS16
|
|
ENUMX
|
|
BFD_RELOC_SH_IMMU16
|
|
ENUMX
|
|
BFD_RELOC_SH_IMM_LOW16
|
|
ENUMX
|
|
BFD_RELOC_SH_IMM_LOW16_PCREL
|
|
ENUMX
|
|
BFD_RELOC_SH_IMM_MEDLOW16
|
|
ENUMX
|
|
BFD_RELOC_SH_IMM_MEDLOW16_PCREL
|
|
ENUMX
|
|
BFD_RELOC_SH_IMM_MEDHI16
|
|
ENUMX
|
|
BFD_RELOC_SH_IMM_MEDHI16_PCREL
|
|
ENUMX
|
|
BFD_RELOC_SH_IMM_HI16
|
|
ENUMX
|
|
BFD_RELOC_SH_IMM_HI16_PCREL
|
|
ENUMX
|
|
BFD_RELOC_SH_PT_16
|
|
ENUMX
|
|
BFD_RELOC_SH_TLS_GD_32
|
|
ENUMX
|
|
BFD_RELOC_SH_TLS_LD_32
|
|
ENUMX
|
|
BFD_RELOC_SH_TLS_LDO_32
|
|
ENUMX
|
|
BFD_RELOC_SH_TLS_IE_32
|
|
ENUMX
|
|
BFD_RELOC_SH_TLS_LE_32
|
|
ENUMX
|
|
BFD_RELOC_SH_TLS_DTPMOD32
|
|
ENUMX
|
|
BFD_RELOC_SH_TLS_DTPOFF32
|
|
ENUMX
|
|
BFD_RELOC_SH_TLS_TPOFF32
|
|
ENUMX
|
|
BFD_RELOC_SH_GOT20
|
|
ENUMX
|
|
BFD_RELOC_SH_GOTOFF20
|
|
ENUMX
|
|
BFD_RELOC_SH_GOTFUNCDESC
|
|
ENUMX
|
|
BFD_RELOC_SH_GOTFUNCDESC20
|
|
ENUMX
|
|
BFD_RELOC_SH_GOTOFFFUNCDESC
|
|
ENUMX
|
|
BFD_RELOC_SH_GOTOFFFUNCDESC20
|
|
ENUMX
|
|
BFD_RELOC_SH_FUNCDESC
|
|
ENUMDOC
|
|
Renesas / SuperH SH relocs. Not all of these appear in object files.
|
|
|
|
ENUM
|
|
BFD_RELOC_ARC_B22_PCREL
|
|
ENUMDOC
|
|
ARC Cores relocs.
|
|
ARC 22 bit pc-relative branch. The lowest two bits must be zero and are
|
|
not stored in the instruction. The high 20 bits are installed in bits 26
|
|
through 7 of the instruction.
|
|
ENUM
|
|
BFD_RELOC_ARC_B26
|
|
ENUMDOC
|
|
ARC 26 bit absolute branch. The lowest two bits must be zero and are not
|
|
stored in the instruction. The high 24 bits are installed in bits 23
|
|
through 0.
|
|
|
|
ENUM
|
|
BFD_RELOC_BFIN_16_IMM
|
|
ENUMDOC
|
|
ADI Blackfin 16 bit immediate absolute reloc.
|
|
ENUM
|
|
BFD_RELOC_BFIN_16_HIGH
|
|
ENUMDOC
|
|
ADI Blackfin 16 bit immediate absolute reloc higher 16 bits.
|
|
ENUM
|
|
BFD_RELOC_BFIN_4_PCREL
|
|
ENUMDOC
|
|
ADI Blackfin 'a' part of LSETUP.
|
|
ENUM
|
|
BFD_RELOC_BFIN_5_PCREL
|
|
ENUMDOC
|
|
ADI Blackfin.
|
|
ENUM
|
|
BFD_RELOC_BFIN_16_LOW
|
|
ENUMDOC
|
|
ADI Blackfin 16 bit immediate absolute reloc lower 16 bits.
|
|
ENUM
|
|
BFD_RELOC_BFIN_10_PCREL
|
|
ENUMDOC
|
|
ADI Blackfin.
|
|
ENUM
|
|
BFD_RELOC_BFIN_11_PCREL
|
|
ENUMDOC
|
|
ADI Blackfin 'b' part of LSETUP.
|
|
ENUM
|
|
BFD_RELOC_BFIN_12_PCREL_JUMP
|
|
ENUMDOC
|
|
ADI Blackfin.
|
|
ENUM
|
|
BFD_RELOC_BFIN_12_PCREL_JUMP_S
|
|
ENUMDOC
|
|
ADI Blackfin Short jump, pcrel.
|
|
ENUM
|
|
BFD_RELOC_BFIN_24_PCREL_CALL_X
|
|
ENUMDOC
|
|
ADI Blackfin Call.x not implemented.
|
|
ENUM
|
|
BFD_RELOC_BFIN_24_PCREL_JUMP_L
|
|
ENUMDOC
|
|
ADI Blackfin Long Jump pcrel.
|
|
ENUM
|
|
BFD_RELOC_BFIN_GOT17M4
|
|
ENUMX
|
|
BFD_RELOC_BFIN_GOTHI
|
|
ENUMX
|
|
BFD_RELOC_BFIN_GOTLO
|
|
ENUMX
|
|
BFD_RELOC_BFIN_FUNCDESC
|
|
ENUMX
|
|
BFD_RELOC_BFIN_FUNCDESC_GOT17M4
|
|
ENUMX
|
|
BFD_RELOC_BFIN_FUNCDESC_GOTHI
|
|
ENUMX
|
|
BFD_RELOC_BFIN_FUNCDESC_GOTLO
|
|
ENUMX
|
|
BFD_RELOC_BFIN_FUNCDESC_VALUE
|
|
ENUMX
|
|
BFD_RELOC_BFIN_FUNCDESC_GOTOFF17M4
|
|
ENUMX
|
|
BFD_RELOC_BFIN_FUNCDESC_GOTOFFHI
|
|
ENUMX
|
|
BFD_RELOC_BFIN_FUNCDESC_GOTOFFLO
|
|
ENUMX
|
|
BFD_RELOC_BFIN_GOTOFF17M4
|
|
ENUMX
|
|
BFD_RELOC_BFIN_GOTOFFHI
|
|
ENUMX
|
|
BFD_RELOC_BFIN_GOTOFFLO
|
|
ENUMDOC
|
|
ADI Blackfin FD-PIC relocations.
|
|
ENUM
|
|
BFD_RELOC_BFIN_GOT
|
|
ENUMDOC
|
|
ADI Blackfin GOT relocation.
|
|
ENUM
|
|
BFD_RELOC_BFIN_PLTPC
|
|
ENUMDOC
|
|
ADI Blackfin PLTPC relocation.
|
|
ENUM
|
|
BFD_ARELOC_BFIN_PUSH
|
|
ENUMDOC
|
|
ADI Blackfin arithmetic relocation.
|
|
ENUM
|
|
BFD_ARELOC_BFIN_CONST
|
|
ENUMDOC
|
|
ADI Blackfin arithmetic relocation.
|
|
ENUM
|
|
BFD_ARELOC_BFIN_ADD
|
|
ENUMDOC
|
|
ADI Blackfin arithmetic relocation.
|
|
ENUM
|
|
BFD_ARELOC_BFIN_SUB
|
|
ENUMDOC
|
|
ADI Blackfin arithmetic relocation.
|
|
ENUM
|
|
BFD_ARELOC_BFIN_MULT
|
|
ENUMDOC
|
|
ADI Blackfin arithmetic relocation.
|
|
ENUM
|
|
BFD_ARELOC_BFIN_DIV
|
|
ENUMDOC
|
|
ADI Blackfin arithmetic relocation.
|
|
ENUM
|
|
BFD_ARELOC_BFIN_MOD
|
|
ENUMDOC
|
|
ADI Blackfin arithmetic relocation.
|
|
ENUM
|
|
BFD_ARELOC_BFIN_LSHIFT
|
|
ENUMDOC
|
|
ADI Blackfin arithmetic relocation.
|
|
ENUM
|
|
BFD_ARELOC_BFIN_RSHIFT
|
|
ENUMDOC
|
|
ADI Blackfin arithmetic relocation.
|
|
ENUM
|
|
BFD_ARELOC_BFIN_AND
|
|
ENUMDOC
|
|
ADI Blackfin arithmetic relocation.
|
|
ENUM
|
|
BFD_ARELOC_BFIN_OR
|
|
ENUMDOC
|
|
ADI Blackfin arithmetic relocation.
|
|
ENUM
|
|
BFD_ARELOC_BFIN_XOR
|
|
ENUMDOC
|
|
ADI Blackfin arithmetic relocation.
|
|
ENUM
|
|
BFD_ARELOC_BFIN_LAND
|
|
ENUMDOC
|
|
ADI Blackfin arithmetic relocation.
|
|
ENUM
|
|
BFD_ARELOC_BFIN_LOR
|
|
ENUMDOC
|
|
ADI Blackfin arithmetic relocation.
|
|
ENUM
|
|
BFD_ARELOC_BFIN_LEN
|
|
ENUMDOC
|
|
ADI Blackfin arithmetic relocation.
|
|
ENUM
|
|
BFD_ARELOC_BFIN_NEG
|
|
ENUMDOC
|
|
ADI Blackfin arithmetic relocation.
|
|
ENUM
|
|
BFD_ARELOC_BFIN_COMP
|
|
ENUMDOC
|
|
ADI Blackfin arithmetic relocation.
|
|
ENUM
|
|
BFD_ARELOC_BFIN_PAGE
|
|
ENUMDOC
|
|
ADI Blackfin arithmetic relocation.
|
|
ENUM
|
|
BFD_ARELOC_BFIN_HWPAGE
|
|
ENUMDOC
|
|
ADI Blackfin arithmetic relocation.
|
|
ENUM
|
|
BFD_ARELOC_BFIN_ADDR
|
|
ENUMDOC
|
|
ADI Blackfin arithmetic relocation.
|
|
|
|
ENUM
|
|
BFD_RELOC_D10V_10_PCREL_R
|
|
ENUMDOC
|
|
Mitsubishi D10V relocs.
|
|
This is a 10-bit reloc with the right 2 bits
|
|
assumed to be 0.
|
|
ENUM
|
|
BFD_RELOC_D10V_10_PCREL_L
|
|
ENUMDOC
|
|
Mitsubishi D10V relocs.
|
|
This is a 10-bit reloc with the right 2 bits
|
|
assumed to be 0. This is the same as the previous reloc
|
|
except it is in the left container, i.e.,
|
|
shifted left 15 bits.
|
|
ENUM
|
|
BFD_RELOC_D10V_18
|
|
ENUMDOC
|
|
This is an 18-bit reloc with the right 2 bits
|
|
assumed to be 0.
|
|
ENUM
|
|
BFD_RELOC_D10V_18_PCREL
|
|
ENUMDOC
|
|
This is an 18-bit reloc with the right 2 bits
|
|
assumed to be 0.
|
|
|
|
ENUM
|
|
BFD_RELOC_D30V_6
|
|
ENUMDOC
|
|
Mitsubishi D30V relocs.
|
|
This is a 6-bit absolute reloc.
|
|
ENUM
|
|
BFD_RELOC_D30V_9_PCREL
|
|
ENUMDOC
|
|
This is a 6-bit pc-relative reloc with
|
|
the right 3 bits assumed to be 0.
|
|
ENUM
|
|
BFD_RELOC_D30V_9_PCREL_R
|
|
ENUMDOC
|
|
This is a 6-bit pc-relative reloc with
|
|
the right 3 bits assumed to be 0. Same
|
|
as the previous reloc but on the right side
|
|
of the container.
|
|
ENUM
|
|
BFD_RELOC_D30V_15
|
|
ENUMDOC
|
|
This is a 12-bit absolute reloc with the
|
|
right 3 bitsassumed to be 0.
|
|
ENUM
|
|
BFD_RELOC_D30V_15_PCREL
|
|
ENUMDOC
|
|
This is a 12-bit pc-relative reloc with
|
|
the right 3 bits assumed to be 0.
|
|
ENUM
|
|
BFD_RELOC_D30V_15_PCREL_R
|
|
ENUMDOC
|
|
This is a 12-bit pc-relative reloc with
|
|
the right 3 bits assumed to be 0. Same
|
|
as the previous reloc but on the right side
|
|
of the container.
|
|
ENUM
|
|
BFD_RELOC_D30V_21
|
|
ENUMDOC
|
|
This is an 18-bit absolute reloc with
|
|
the right 3 bits assumed to be 0.
|
|
ENUM
|
|
BFD_RELOC_D30V_21_PCREL
|
|
ENUMDOC
|
|
This is an 18-bit pc-relative reloc with
|
|
the right 3 bits assumed to be 0.
|
|
ENUM
|
|
BFD_RELOC_D30V_21_PCREL_R
|
|
ENUMDOC
|
|
This is an 18-bit pc-relative reloc with
|
|
the right 3 bits assumed to be 0. Same
|
|
as the previous reloc but on the right side
|
|
of the container.
|
|
ENUM
|
|
BFD_RELOC_D30V_32
|
|
ENUMDOC
|
|
This is a 32-bit absolute reloc.
|
|
ENUM
|
|
BFD_RELOC_D30V_32_PCREL
|
|
ENUMDOC
|
|
This is a 32-bit pc-relative reloc.
|
|
|
|
ENUM
|
|
BFD_RELOC_DLX_HI16_S
|
|
ENUMDOC
|
|
DLX relocs
|
|
ENUM
|
|
BFD_RELOC_DLX_LO16
|
|
ENUMDOC
|
|
DLX relocs
|
|
ENUM
|
|
BFD_RELOC_DLX_JMP26
|
|
ENUMDOC
|
|
DLX relocs
|
|
|
|
ENUM
|
|
BFD_RELOC_M32C_HI8
|
|
ENUMX
|
|
BFD_RELOC_M32C_RL_JUMP
|
|
ENUMX
|
|
BFD_RELOC_M32C_RL_1ADDR
|
|
ENUMX
|
|
BFD_RELOC_M32C_RL_2ADDR
|
|
ENUMDOC
|
|
Renesas M16C/M32C Relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_M32R_24
|
|
ENUMDOC
|
|
Renesas M32R (formerly Mitsubishi M32R) relocs.
|
|
This is a 24 bit absolute address.
|
|
ENUM
|
|
BFD_RELOC_M32R_10_PCREL
|
|
ENUMDOC
|
|
This is a 10-bit pc-relative reloc with the right 2 bits assumed to be 0.
|
|
ENUM
|
|
BFD_RELOC_M32R_18_PCREL
|
|
ENUMDOC
|
|
This is an 18-bit reloc with the right 2 bits assumed to be 0.
|
|
ENUM
|
|
BFD_RELOC_M32R_26_PCREL
|
|
ENUMDOC
|
|
This is a 26-bit reloc with the right 2 bits assumed to be 0.
|
|
ENUM
|
|
BFD_RELOC_M32R_HI16_ULO
|
|
ENUMDOC
|
|
This is a 16-bit reloc containing the high 16 bits of an address
|
|
used when the lower 16 bits are treated as unsigned.
|
|
ENUM
|
|
BFD_RELOC_M32R_HI16_SLO
|
|
ENUMDOC
|
|
This is a 16-bit reloc containing the high 16 bits of an address
|
|
used when the lower 16 bits are treated as signed.
|
|
ENUM
|
|
BFD_RELOC_M32R_LO16
|
|
ENUMDOC
|
|
This is a 16-bit reloc containing the lower 16 bits of an address.
|
|
ENUM
|
|
BFD_RELOC_M32R_SDA16
|
|
ENUMDOC
|
|
This is a 16-bit reloc containing the small data area offset for use in
|
|
add3, load, and store instructions.
|
|
ENUM
|
|
BFD_RELOC_M32R_GOT24
|
|
ENUMX
|
|
BFD_RELOC_M32R_26_PLTREL
|
|
ENUMX
|
|
BFD_RELOC_M32R_COPY
|
|
ENUMX
|
|
BFD_RELOC_M32R_GLOB_DAT
|
|
ENUMX
|
|
BFD_RELOC_M32R_JMP_SLOT
|
|
ENUMX
|
|
BFD_RELOC_M32R_RELATIVE
|
|
ENUMX
|
|
BFD_RELOC_M32R_GOTOFF
|
|
ENUMX
|
|
BFD_RELOC_M32R_GOTOFF_HI_ULO
|
|
ENUMX
|
|
BFD_RELOC_M32R_GOTOFF_HI_SLO
|
|
ENUMX
|
|
BFD_RELOC_M32R_GOTOFF_LO
|
|
ENUMX
|
|
BFD_RELOC_M32R_GOTPC24
|
|
ENUMX
|
|
BFD_RELOC_M32R_GOT16_HI_ULO
|
|
ENUMX
|
|
BFD_RELOC_M32R_GOT16_HI_SLO
|
|
ENUMX
|
|
BFD_RELOC_M32R_GOT16_LO
|
|
ENUMX
|
|
BFD_RELOC_M32R_GOTPC_HI_ULO
|
|
ENUMX
|
|
BFD_RELOC_M32R_GOTPC_HI_SLO
|
|
ENUMX
|
|
BFD_RELOC_M32R_GOTPC_LO
|
|
ENUMDOC
|
|
For PIC.
|
|
|
|
|
|
ENUM
|
|
BFD_RELOC_NDS32_20
|
|
ENUMDOC
|
|
NDS32 relocs.
|
|
This is a 20 bit absolute address.
|
|
ENUM
|
|
BFD_RELOC_NDS32_9_PCREL
|
|
ENUMDOC
|
|
This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
|
|
ENUM
|
|
BFD_RELOC_NDS32_WORD_9_PCREL
|
|
ENUMDOC
|
|
This is a 9-bit pc-relative reloc with the right 1 bit assumed to be 0.
|
|
ENUM
|
|
BFD_RELOC_NDS32_15_PCREL
|
|
ENUMDOC
|
|
This is an 15-bit reloc with the right 1 bit assumed to be 0.
|
|
ENUM
|
|
BFD_RELOC_NDS32_17_PCREL
|
|
ENUMDOC
|
|
This is an 17-bit reloc with the right 1 bit assumed to be 0.
|
|
ENUM
|
|
BFD_RELOC_NDS32_25_PCREL
|
|
ENUMDOC
|
|
This is a 25-bit reloc with the right 1 bit assumed to be 0.
|
|
ENUM
|
|
BFD_RELOC_NDS32_HI20
|
|
ENUMDOC
|
|
This is a 20-bit reloc containing the high 20 bits of an address
|
|
used with the lower 12 bits
|
|
ENUM
|
|
BFD_RELOC_NDS32_LO12S3
|
|
ENUMDOC
|
|
This is a 12-bit reloc containing the lower 12 bits of an address
|
|
then shift right by 3. This is used with ldi,sdi...
|
|
ENUM
|
|
BFD_RELOC_NDS32_LO12S2
|
|
ENUMDOC
|
|
This is a 12-bit reloc containing the lower 12 bits of an address
|
|
then shift left by 2. This is used with lwi,swi...
|
|
ENUM
|
|
BFD_RELOC_NDS32_LO12S1
|
|
ENUMDOC
|
|
This is a 12-bit reloc containing the lower 12 bits of an address
|
|
then shift left by 1. This is used with lhi,shi...
|
|
ENUM
|
|
BFD_RELOC_NDS32_LO12S0
|
|
ENUMDOC
|
|
This is a 12-bit reloc containing the lower 12 bits of an address
|
|
then shift left by 0. This is used with lbisbi...
|
|
ENUM
|
|
BFD_RELOC_NDS32_LO12S0_ORI
|
|
ENUMDOC
|
|
This is a 12-bit reloc containing the lower 12 bits of an address
|
|
then shift left by 0. This is only used with branch relaxations
|
|
ENUM
|
|
BFD_RELOC_NDS32_SDA15S3
|
|
ENUMDOC
|
|
This is a 15-bit reloc containing the small data area 18-bit signed offset
|
|
and shift left by 3 for use in ldi, sdi...
|
|
ENUM
|
|
BFD_RELOC_NDS32_SDA15S2
|
|
ENUMDOC
|
|
This is a 15-bit reloc containing the small data area 17-bit signed offset
|
|
and shift left by 2 for use in lwi, swi...
|
|
ENUM
|
|
BFD_RELOC_NDS32_SDA15S1
|
|
ENUMDOC
|
|
This is a 15-bit reloc containing the small data area 16-bit signed offset
|
|
and shift left by 1 for use in lhi, shi...
|
|
ENUM
|
|
BFD_RELOC_NDS32_SDA15S0
|
|
ENUMDOC
|
|
This is a 15-bit reloc containing the small data area 15-bit signed offset
|
|
and shift left by 0 for use in lbi, sbi...
|
|
ENUM
|
|
BFD_RELOC_NDS32_SDA16S3
|
|
ENUMDOC
|
|
This is a 16-bit reloc containing the small data area 16-bit signed offset
|
|
and shift left by 3
|
|
ENUM
|
|
BFD_RELOC_NDS32_SDA17S2
|
|
ENUMDOC
|
|
This is a 17-bit reloc containing the small data area 17-bit signed offset
|
|
and shift left by 2 for use in lwi.gp, swi.gp...
|
|
ENUM
|
|
BFD_RELOC_NDS32_SDA18S1
|
|
ENUMDOC
|
|
This is a 18-bit reloc containing the small data area 18-bit signed offset
|
|
and shift left by 1 for use in lhi.gp, shi.gp...
|
|
ENUM
|
|
BFD_RELOC_NDS32_SDA19S0
|
|
ENUMDOC
|
|
This is a 19-bit reloc containing the small data area 19-bit signed offset
|
|
and shift left by 0 for use in lbi.gp, sbi.gp...
|
|
ENUM
|
|
BFD_RELOC_NDS32_GOT20
|
|
ENUMX
|
|
BFD_RELOC_NDS32_9_PLTREL
|
|
ENUMX
|
|
BFD_RELOC_NDS32_25_PLTREL
|
|
ENUMX
|
|
BFD_RELOC_NDS32_COPY
|
|
ENUMX
|
|
BFD_RELOC_NDS32_GLOB_DAT
|
|
ENUMX
|
|
BFD_RELOC_NDS32_JMP_SLOT
|
|
ENUMX
|
|
BFD_RELOC_NDS32_RELATIVE
|
|
ENUMX
|
|
BFD_RELOC_NDS32_GOTOFF
|
|
ENUMX
|
|
BFD_RELOC_NDS32_GOTOFF_HI20
|
|
ENUMX
|
|
BFD_RELOC_NDS32_GOTOFF_LO12
|
|
ENUMX
|
|
BFD_RELOC_NDS32_GOTPC20
|
|
ENUMX
|
|
BFD_RELOC_NDS32_GOT_HI20
|
|
ENUMX
|
|
BFD_RELOC_NDS32_GOT_LO12
|
|
ENUMX
|
|
BFD_RELOC_NDS32_GOTPC_HI20
|
|
ENUMX
|
|
BFD_RELOC_NDS32_GOTPC_LO12
|
|
ENUMDOC
|
|
for PIC
|
|
ENUM
|
|
BFD_RELOC_NDS32_INSN16
|
|
ENUMX
|
|
BFD_RELOC_NDS32_LABEL
|
|
ENUMX
|
|
BFD_RELOC_NDS32_LONGCALL1
|
|
ENUMX
|
|
BFD_RELOC_NDS32_LONGCALL2
|
|
ENUMX
|
|
BFD_RELOC_NDS32_LONGCALL3
|
|
ENUMX
|
|
BFD_RELOC_NDS32_LONGJUMP1
|
|
ENUMX
|
|
BFD_RELOC_NDS32_LONGJUMP2
|
|
ENUMX
|
|
BFD_RELOC_NDS32_LONGJUMP3
|
|
ENUMX
|
|
BFD_RELOC_NDS32_LOADSTORE
|
|
ENUMX
|
|
BFD_RELOC_NDS32_9_FIXED
|
|
ENUMX
|
|
BFD_RELOC_NDS32_15_FIXED
|
|
ENUMX
|
|
BFD_RELOC_NDS32_17_FIXED
|
|
ENUMX
|
|
BFD_RELOC_NDS32_25_FIXED
|
|
ENUMDOC
|
|
for relax
|
|
ENUM
|
|
BFD_RELOC_NDS32_PLTREL_HI20
|
|
ENUMX
|
|
BFD_RELOC_NDS32_PLTREL_LO12
|
|
ENUMX
|
|
BFD_RELOC_NDS32_PLT_GOTREL_HI20
|
|
ENUMX
|
|
BFD_RELOC_NDS32_PLT_GOTREL_LO12
|
|
ENUMDOC
|
|
for PIC
|
|
ENUM
|
|
BFD_RELOC_NDS32_SDA12S2_DP
|
|
ENUMX
|
|
BFD_RELOC_NDS32_SDA12S2_SP
|
|
ENUMX
|
|
BFD_RELOC_NDS32_LO12S2_DP
|
|
ENUMX
|
|
BFD_RELOC_NDS32_LO12S2_SP
|
|
ENUMDOC
|
|
for floating point
|
|
ENUM
|
|
BFD_RELOC_NDS32_DWARF2_OP1
|
|
ENUMX
|
|
BFD_RELOC_NDS32_DWARF2_OP2
|
|
ENUMX
|
|
BFD_RELOC_NDS32_DWARF2_LEB
|
|
ENUMDOC
|
|
for dwarf2 debug_line.
|
|
ENUM
|
|
BFD_RELOC_NDS32_UPDATE_TA
|
|
ENUMDOC
|
|
for eliminate 16-bit instructions
|
|
ENUM
|
|
BFD_RELOC_NDS32_PLT_GOTREL_LO20
|
|
ENUMX
|
|
BFD_RELOC_NDS32_PLT_GOTREL_LO15
|
|
ENUMX
|
|
BFD_RELOC_NDS32_PLT_GOTREL_LO19
|
|
ENUMX
|
|
BFD_RELOC_NDS32_GOT_LO15
|
|
ENUMX
|
|
BFD_RELOC_NDS32_GOT_LO19
|
|
ENUMX
|
|
BFD_RELOC_NDS32_GOTOFF_LO15
|
|
ENUMX
|
|
BFD_RELOC_NDS32_GOTOFF_LO19
|
|
ENUMX
|
|
BFD_RELOC_NDS32_GOT15S2
|
|
ENUMX
|
|
BFD_RELOC_NDS32_GOT17S2
|
|
ENUMDOC
|
|
for PIC object relaxation
|
|
ENUM
|
|
BFD_RELOC_NDS32_5
|
|
ENUMDOC
|
|
NDS32 relocs.
|
|
This is a 5 bit absolute address.
|
|
ENUM
|
|
BFD_RELOC_NDS32_10_UPCREL
|
|
ENUMDOC
|
|
This is a 10-bit unsigned pc-relative reloc with the right 1 bit assumed to be 0.
|
|
ENUM
|
|
BFD_RELOC_NDS32_SDA_FP7U2_RELA
|
|
ENUMDOC
|
|
If fp were omitted, fp can used as another gp.
|
|
ENUM
|
|
BFD_RELOC_NDS32_RELAX_ENTRY
|
|
ENUMX
|
|
BFD_RELOC_NDS32_GOT_SUFF
|
|
ENUMX
|
|
BFD_RELOC_NDS32_GOTOFF_SUFF
|
|
ENUMX
|
|
BFD_RELOC_NDS32_PLT_GOT_SUFF
|
|
ENUMX
|
|
BFD_RELOC_NDS32_MULCALL_SUFF
|
|
ENUMX
|
|
BFD_RELOC_NDS32_PTR
|
|
ENUMX
|
|
BFD_RELOC_NDS32_PTR_COUNT
|
|
ENUMX
|
|
BFD_RELOC_NDS32_PTR_RESOLVED
|
|
ENUMX
|
|
BFD_RELOC_NDS32_PLTBLOCK
|
|
ENUMX
|
|
BFD_RELOC_NDS32_RELAX_REGION_BEGIN
|
|
ENUMX
|
|
BFD_RELOC_NDS32_RELAX_REGION_END
|
|
ENUMX
|
|
BFD_RELOC_NDS32_MINUEND
|
|
ENUMX
|
|
BFD_RELOC_NDS32_SUBTRAHEND
|
|
ENUMX
|
|
BFD_RELOC_NDS32_DIFF8
|
|
ENUMX
|
|
BFD_RELOC_NDS32_DIFF16
|
|
ENUMX
|
|
BFD_RELOC_NDS32_DIFF32
|
|
ENUMX
|
|
BFD_RELOC_NDS32_DIFF_ULEB128
|
|
ENUMX
|
|
BFD_RELOC_NDS32_25_ABS
|
|
ENUMX
|
|
BFD_RELOC_NDS32_DATA
|
|
ENUMX
|
|
BFD_RELOC_NDS32_TRAN
|
|
ENUMX
|
|
BFD_RELOC_NDS32_17IFC_PCREL
|
|
ENUMX
|
|
BFD_RELOC_NDS32_10IFCU_PCREL
|
|
ENUMDOC
|
|
relaxation relative relocation types
|
|
|
|
|
|
ENUM
|
|
BFD_RELOC_V850_9_PCREL
|
|
ENUMDOC
|
|
This is a 9-bit reloc
|
|
ENUM
|
|
BFD_RELOC_V850_22_PCREL
|
|
ENUMDOC
|
|
This is a 22-bit reloc
|
|
|
|
ENUM
|
|
BFD_RELOC_V850_SDA_16_16_OFFSET
|
|
ENUMDOC
|
|
This is a 16 bit offset from the short data area pointer.
|
|
ENUM
|
|
BFD_RELOC_V850_SDA_15_16_OFFSET
|
|
ENUMDOC
|
|
This is a 16 bit offset (of which only 15 bits are used) from the
|
|
short data area pointer.
|
|
ENUM
|
|
BFD_RELOC_V850_ZDA_16_16_OFFSET
|
|
ENUMDOC
|
|
This is a 16 bit offset from the zero data area pointer.
|
|
ENUM
|
|
BFD_RELOC_V850_ZDA_15_16_OFFSET
|
|
ENUMDOC
|
|
This is a 16 bit offset (of which only 15 bits are used) from the
|
|
zero data area pointer.
|
|
ENUM
|
|
BFD_RELOC_V850_TDA_6_8_OFFSET
|
|
ENUMDOC
|
|
This is an 8 bit offset (of which only 6 bits are used) from the
|
|
tiny data area pointer.
|
|
ENUM
|
|
BFD_RELOC_V850_TDA_7_8_OFFSET
|
|
ENUMDOC
|
|
This is an 8bit offset (of which only 7 bits are used) from the tiny
|
|
data area pointer.
|
|
ENUM
|
|
BFD_RELOC_V850_TDA_7_7_OFFSET
|
|
ENUMDOC
|
|
This is a 7 bit offset from the tiny data area pointer.
|
|
ENUM
|
|
BFD_RELOC_V850_TDA_16_16_OFFSET
|
|
ENUMDOC
|
|
This is a 16 bit offset from the tiny data area pointer.
|
|
COMMENT
|
|
ENUM
|
|
BFD_RELOC_V850_TDA_4_5_OFFSET
|
|
ENUMDOC
|
|
This is a 5 bit offset (of which only 4 bits are used) from the tiny
|
|
data area pointer.
|
|
ENUM
|
|
BFD_RELOC_V850_TDA_4_4_OFFSET
|
|
ENUMDOC
|
|
This is a 4 bit offset from the tiny data area pointer.
|
|
ENUM
|
|
BFD_RELOC_V850_SDA_16_16_SPLIT_OFFSET
|
|
ENUMDOC
|
|
This is a 16 bit offset from the short data area pointer, with the
|
|
bits placed non-contiguously in the instruction.
|
|
ENUM
|
|
BFD_RELOC_V850_ZDA_16_16_SPLIT_OFFSET
|
|
ENUMDOC
|
|
This is a 16 bit offset from the zero data area pointer, with the
|
|
bits placed non-contiguously in the instruction.
|
|
ENUM
|
|
BFD_RELOC_V850_CALLT_6_7_OFFSET
|
|
ENUMDOC
|
|
This is a 6 bit offset from the call table base pointer.
|
|
ENUM
|
|
BFD_RELOC_V850_CALLT_16_16_OFFSET
|
|
ENUMDOC
|
|
This is a 16 bit offset from the call table base pointer.
|
|
ENUM
|
|
BFD_RELOC_V850_LONGCALL
|
|
ENUMDOC
|
|
Used for relaxing indirect function calls.
|
|
ENUM
|
|
BFD_RELOC_V850_LONGJUMP
|
|
ENUMDOC
|
|
Used for relaxing indirect jumps.
|
|
ENUM
|
|
BFD_RELOC_V850_ALIGN
|
|
ENUMDOC
|
|
Used to maintain alignment whilst relaxing.
|
|
ENUM
|
|
BFD_RELOC_V850_LO16_SPLIT_OFFSET
|
|
ENUMDOC
|
|
This is a variation of BFD_RELOC_LO16 that can be used in v850e ld.bu
|
|
instructions.
|
|
ENUM
|
|
BFD_RELOC_V850_16_PCREL
|
|
ENUMDOC
|
|
This is a 16-bit reloc.
|
|
ENUM
|
|
BFD_RELOC_V850_17_PCREL
|
|
ENUMDOC
|
|
This is a 17-bit reloc.
|
|
ENUM
|
|
BFD_RELOC_V850_23
|
|
ENUMDOC
|
|
This is a 23-bit reloc.
|
|
ENUM
|
|
BFD_RELOC_V850_32_PCREL
|
|
ENUMDOC
|
|
This is a 32-bit reloc.
|
|
ENUM
|
|
BFD_RELOC_V850_32_ABS
|
|
ENUMDOC
|
|
This is a 32-bit reloc.
|
|
ENUM
|
|
BFD_RELOC_V850_16_SPLIT_OFFSET
|
|
ENUMDOC
|
|
This is a 16-bit reloc.
|
|
ENUM
|
|
BFD_RELOC_V850_16_S1
|
|
ENUMDOC
|
|
This is a 16-bit reloc.
|
|
ENUM
|
|
BFD_RELOC_V850_LO16_S1
|
|
ENUMDOC
|
|
Low 16 bits. 16 bit shifted by 1.
|
|
ENUM
|
|
BFD_RELOC_V850_CALLT_15_16_OFFSET
|
|
ENUMDOC
|
|
This is a 16 bit offset from the call table base pointer.
|
|
ENUM
|
|
BFD_RELOC_V850_32_GOTPCREL
|
|
ENUMDOC
|
|
DSO relocations.
|
|
ENUM
|
|
BFD_RELOC_V850_16_GOT
|
|
ENUMDOC
|
|
DSO relocations.
|
|
ENUM
|
|
BFD_RELOC_V850_32_GOT
|
|
ENUMDOC
|
|
DSO relocations.
|
|
ENUM
|
|
BFD_RELOC_V850_22_PLT_PCREL
|
|
ENUMDOC
|
|
DSO relocations.
|
|
ENUM
|
|
BFD_RELOC_V850_32_PLT_PCREL
|
|
ENUMDOC
|
|
DSO relocations.
|
|
ENUM
|
|
BFD_RELOC_V850_COPY
|
|
ENUMDOC
|
|
DSO relocations.
|
|
ENUM
|
|
BFD_RELOC_V850_GLOB_DAT
|
|
ENUMDOC
|
|
DSO relocations.
|
|
ENUM
|
|
BFD_RELOC_V850_JMP_SLOT
|
|
ENUMDOC
|
|
DSO relocations.
|
|
ENUM
|
|
BFD_RELOC_V850_RELATIVE
|
|
ENUMDOC
|
|
DSO relocations.
|
|
ENUM
|
|
BFD_RELOC_V850_16_GOTOFF
|
|
ENUMDOC
|
|
DSO relocations.
|
|
ENUM
|
|
BFD_RELOC_V850_32_GOTOFF
|
|
ENUMDOC
|
|
DSO relocations.
|
|
ENUM
|
|
BFD_RELOC_V850_CODE
|
|
ENUMDOC
|
|
start code.
|
|
ENUM
|
|
BFD_RELOC_V850_DATA
|
|
ENUMDOC
|
|
start data in text.
|
|
|
|
ENUM
|
|
BFD_RELOC_TIC30_LDP
|
|
ENUMDOC
|
|
This is a 8bit DP reloc for the tms320c30, where the most
|
|
significant 8 bits of a 24 bit word are placed into the least
|
|
significant 8 bits of the opcode.
|
|
|
|
ENUM
|
|
BFD_RELOC_TIC54X_PARTLS7
|
|
ENUMDOC
|
|
This is a 7bit reloc for the tms320c54x, where the least
|
|
significant 7 bits of a 16 bit word are placed into the least
|
|
significant 7 bits of the opcode.
|
|
|
|
ENUM
|
|
BFD_RELOC_TIC54X_PARTMS9
|
|
ENUMDOC
|
|
This is a 9bit DP reloc for the tms320c54x, where the most
|
|
significant 9 bits of a 16 bit word are placed into the least
|
|
significant 9 bits of the opcode.
|
|
|
|
ENUM
|
|
BFD_RELOC_TIC54X_23
|
|
ENUMDOC
|
|
This is an extended address 23-bit reloc for the tms320c54x.
|
|
|
|
ENUM
|
|
BFD_RELOC_TIC54X_16_OF_23
|
|
ENUMDOC
|
|
This is a 16-bit reloc for the tms320c54x, where the least
|
|
significant 16 bits of a 23-bit extended address are placed into
|
|
the opcode.
|
|
|
|
ENUM
|
|
BFD_RELOC_TIC54X_MS7_OF_23
|
|
ENUMDOC
|
|
This is a reloc for the tms320c54x, where the most
|
|
significant 7 bits of a 23-bit extended address are placed into
|
|
the opcode.
|
|
|
|
ENUM
|
|
BFD_RELOC_C6000_PCR_S21
|
|
ENUMX
|
|
BFD_RELOC_C6000_PCR_S12
|
|
ENUMX
|
|
BFD_RELOC_C6000_PCR_S10
|
|
ENUMX
|
|
BFD_RELOC_C6000_PCR_S7
|
|
ENUMX
|
|
BFD_RELOC_C6000_ABS_S16
|
|
ENUMX
|
|
BFD_RELOC_C6000_ABS_L16
|
|
ENUMX
|
|
BFD_RELOC_C6000_ABS_H16
|
|
ENUMX
|
|
BFD_RELOC_C6000_SBR_U15_B
|
|
ENUMX
|
|
BFD_RELOC_C6000_SBR_U15_H
|
|
ENUMX
|
|
BFD_RELOC_C6000_SBR_U15_W
|
|
ENUMX
|
|
BFD_RELOC_C6000_SBR_S16
|
|
ENUMX
|
|
BFD_RELOC_C6000_SBR_L16_B
|
|
ENUMX
|
|
BFD_RELOC_C6000_SBR_L16_H
|
|
ENUMX
|
|
BFD_RELOC_C6000_SBR_L16_W
|
|
ENUMX
|
|
BFD_RELOC_C6000_SBR_H16_B
|
|
ENUMX
|
|
BFD_RELOC_C6000_SBR_H16_H
|
|
ENUMX
|
|
BFD_RELOC_C6000_SBR_H16_W
|
|
ENUMX
|
|
BFD_RELOC_C6000_SBR_GOT_U15_W
|
|
ENUMX
|
|
BFD_RELOC_C6000_SBR_GOT_L16_W
|
|
ENUMX
|
|
BFD_RELOC_C6000_SBR_GOT_H16_W
|
|
ENUMX
|
|
BFD_RELOC_C6000_DSBT_INDEX
|
|
ENUMX
|
|
BFD_RELOC_C6000_PREL31
|
|
ENUMX
|
|
BFD_RELOC_C6000_COPY
|
|
ENUMX
|
|
BFD_RELOC_C6000_JUMP_SLOT
|
|
ENUMX
|
|
BFD_RELOC_C6000_EHTYPE
|
|
ENUMX
|
|
BFD_RELOC_C6000_PCR_H16
|
|
ENUMX
|
|
BFD_RELOC_C6000_PCR_L16
|
|
ENUMX
|
|
BFD_RELOC_C6000_ALIGN
|
|
ENUMX
|
|
BFD_RELOC_C6000_FPHEAD
|
|
ENUMX
|
|
BFD_RELOC_C6000_NOCMP
|
|
ENUMDOC
|
|
TMS320C6000 relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_FR30_48
|
|
ENUMDOC
|
|
This is a 48 bit reloc for the FR30 that stores 32 bits.
|
|
ENUM
|
|
BFD_RELOC_FR30_20
|
|
ENUMDOC
|
|
This is a 32 bit reloc for the FR30 that stores 20 bits split up into
|
|
two sections.
|
|
ENUM
|
|
BFD_RELOC_FR30_6_IN_4
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the FR30 that stores a 6 bit word offset in
|
|
4 bits.
|
|
ENUM
|
|
BFD_RELOC_FR30_8_IN_8
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the FR30 that stores an 8 bit byte offset
|
|
into 8 bits.
|
|
ENUM
|
|
BFD_RELOC_FR30_9_IN_8
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the FR30 that stores a 9 bit short offset
|
|
into 8 bits.
|
|
ENUM
|
|
BFD_RELOC_FR30_10_IN_8
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the FR30 that stores a 10 bit word offset
|
|
into 8 bits.
|
|
ENUM
|
|
BFD_RELOC_FR30_9_PCREL
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the FR30 that stores a 9 bit pc relative
|
|
short offset into 8 bits.
|
|
ENUM
|
|
BFD_RELOC_FR30_12_PCREL
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the FR30 that stores a 12 bit pc relative
|
|
short offset into 11 bits.
|
|
|
|
ENUM
|
|
BFD_RELOC_MCORE_PCREL_IMM8BY4
|
|
ENUMX
|
|
BFD_RELOC_MCORE_PCREL_IMM11BY2
|
|
ENUMX
|
|
BFD_RELOC_MCORE_PCREL_IMM4BY2
|
|
ENUMX
|
|
BFD_RELOC_MCORE_PCREL_32
|
|
ENUMX
|
|
BFD_RELOC_MCORE_PCREL_JSR_IMM11BY2
|
|
ENUMX
|
|
BFD_RELOC_MCORE_RVA
|
|
ENUMDOC
|
|
Motorola Mcore relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_MEP_8
|
|
ENUMX
|
|
BFD_RELOC_MEP_16
|
|
ENUMX
|
|
BFD_RELOC_MEP_32
|
|
ENUMX
|
|
BFD_RELOC_MEP_PCREL8A2
|
|
ENUMX
|
|
BFD_RELOC_MEP_PCREL12A2
|
|
ENUMX
|
|
BFD_RELOC_MEP_PCREL17A2
|
|
ENUMX
|
|
BFD_RELOC_MEP_PCREL24A2
|
|
ENUMX
|
|
BFD_RELOC_MEP_PCABS24A2
|
|
ENUMX
|
|
BFD_RELOC_MEP_LOW16
|
|
ENUMX
|
|
BFD_RELOC_MEP_HI16U
|
|
ENUMX
|
|
BFD_RELOC_MEP_HI16S
|
|
ENUMX
|
|
BFD_RELOC_MEP_GPREL
|
|
ENUMX
|
|
BFD_RELOC_MEP_TPREL
|
|
ENUMX
|
|
BFD_RELOC_MEP_TPREL7
|
|
ENUMX
|
|
BFD_RELOC_MEP_TPREL7A2
|
|
ENUMX
|
|
BFD_RELOC_MEP_TPREL7A4
|
|
ENUMX
|
|
BFD_RELOC_MEP_UIMM24
|
|
ENUMX
|
|
BFD_RELOC_MEP_ADDR24A4
|
|
ENUMX
|
|
BFD_RELOC_MEP_GNU_VTINHERIT
|
|
ENUMX
|
|
BFD_RELOC_MEP_GNU_VTENTRY
|
|
ENUMDOC
|
|
Toshiba Media Processor Relocations.
|
|
COMMENT
|
|
|
|
ENUM
|
|
BFD_RELOC_METAG_HIADDR16
|
|
ENUMX
|
|
BFD_RELOC_METAG_LOADDR16
|
|
ENUMX
|
|
BFD_RELOC_METAG_RELBRANCH
|
|
ENUMX
|
|
BFD_RELOC_METAG_GETSETOFF
|
|
ENUMX
|
|
BFD_RELOC_METAG_HIOG
|
|
ENUMX
|
|
BFD_RELOC_METAG_LOOG
|
|
ENUMX
|
|
BFD_RELOC_METAG_REL8
|
|
ENUMX
|
|
BFD_RELOC_METAG_REL16
|
|
ENUMX
|
|
BFD_RELOC_METAG_HI16_GOTOFF
|
|
ENUMX
|
|
BFD_RELOC_METAG_LO16_GOTOFF
|
|
ENUMX
|
|
BFD_RELOC_METAG_GETSET_GOTOFF
|
|
ENUMX
|
|
BFD_RELOC_METAG_GETSET_GOT
|
|
ENUMX
|
|
BFD_RELOC_METAG_HI16_GOTPC
|
|
ENUMX
|
|
BFD_RELOC_METAG_LO16_GOTPC
|
|
ENUMX
|
|
BFD_RELOC_METAG_HI16_PLT
|
|
ENUMX
|
|
BFD_RELOC_METAG_LO16_PLT
|
|
ENUMX
|
|
BFD_RELOC_METAG_RELBRANCH_PLT
|
|
ENUMX
|
|
BFD_RELOC_METAG_GOTOFF
|
|
ENUMX
|
|
BFD_RELOC_METAG_PLT
|
|
ENUMX
|
|
BFD_RELOC_METAG_COPY
|
|
ENUMX
|
|
BFD_RELOC_METAG_JMP_SLOT
|
|
ENUMX
|
|
BFD_RELOC_METAG_RELATIVE
|
|
ENUMX
|
|
BFD_RELOC_METAG_GLOB_DAT
|
|
ENUMX
|
|
BFD_RELOC_METAG_TLS_GD
|
|
ENUMX
|
|
BFD_RELOC_METAG_TLS_LDM
|
|
ENUMX
|
|
BFD_RELOC_METAG_TLS_LDO_HI16
|
|
ENUMX
|
|
BFD_RELOC_METAG_TLS_LDO_LO16
|
|
ENUMX
|
|
BFD_RELOC_METAG_TLS_LDO
|
|
ENUMX
|
|
BFD_RELOC_METAG_TLS_IE
|
|
ENUMX
|
|
BFD_RELOC_METAG_TLS_IENONPIC
|
|
ENUMX
|
|
BFD_RELOC_METAG_TLS_IENONPIC_HI16
|
|
ENUMX
|
|
BFD_RELOC_METAG_TLS_IENONPIC_LO16
|
|
ENUMX
|
|
BFD_RELOC_METAG_TLS_TPOFF
|
|
ENUMX
|
|
BFD_RELOC_METAG_TLS_DTPMOD
|
|
ENUMX
|
|
BFD_RELOC_METAG_TLS_DTPOFF
|
|
ENUMX
|
|
BFD_RELOC_METAG_TLS_LE
|
|
ENUMX
|
|
BFD_RELOC_METAG_TLS_LE_HI16
|
|
ENUMX
|
|
BFD_RELOC_METAG_TLS_LE_LO16
|
|
ENUMDOC
|
|
Imagination Technologies Meta relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_MMIX_GETA
|
|
ENUMX
|
|
BFD_RELOC_MMIX_GETA_1
|
|
ENUMX
|
|
BFD_RELOC_MMIX_GETA_2
|
|
ENUMX
|
|
BFD_RELOC_MMIX_GETA_3
|
|
ENUMDOC
|
|
These are relocations for the GETA instruction.
|
|
ENUM
|
|
BFD_RELOC_MMIX_CBRANCH
|
|
ENUMX
|
|
BFD_RELOC_MMIX_CBRANCH_J
|
|
ENUMX
|
|
BFD_RELOC_MMIX_CBRANCH_1
|
|
ENUMX
|
|
BFD_RELOC_MMIX_CBRANCH_2
|
|
ENUMX
|
|
BFD_RELOC_MMIX_CBRANCH_3
|
|
ENUMDOC
|
|
These are relocations for a conditional branch instruction.
|
|
ENUM
|
|
BFD_RELOC_MMIX_PUSHJ
|
|
ENUMX
|
|
BFD_RELOC_MMIX_PUSHJ_1
|
|
ENUMX
|
|
BFD_RELOC_MMIX_PUSHJ_2
|
|
ENUMX
|
|
BFD_RELOC_MMIX_PUSHJ_3
|
|
ENUMX
|
|
BFD_RELOC_MMIX_PUSHJ_STUBBABLE
|
|
ENUMDOC
|
|
These are relocations for the PUSHJ instruction.
|
|
ENUM
|
|
BFD_RELOC_MMIX_JMP
|
|
ENUMX
|
|
BFD_RELOC_MMIX_JMP_1
|
|
ENUMX
|
|
BFD_RELOC_MMIX_JMP_2
|
|
ENUMX
|
|
BFD_RELOC_MMIX_JMP_3
|
|
ENUMDOC
|
|
These are relocations for the JMP instruction.
|
|
ENUM
|
|
BFD_RELOC_MMIX_ADDR19
|
|
ENUMDOC
|
|
This is a relocation for a relative address as in a GETA instruction or
|
|
a branch.
|
|
ENUM
|
|
BFD_RELOC_MMIX_ADDR27
|
|
ENUMDOC
|
|
This is a relocation for a relative address as in a JMP instruction.
|
|
ENUM
|
|
BFD_RELOC_MMIX_REG_OR_BYTE
|
|
ENUMDOC
|
|
This is a relocation for an instruction field that may be a general
|
|
register or a value 0..255.
|
|
ENUM
|
|
BFD_RELOC_MMIX_REG
|
|
ENUMDOC
|
|
This is a relocation for an instruction field that may be a general
|
|
register.
|
|
ENUM
|
|
BFD_RELOC_MMIX_BASE_PLUS_OFFSET
|
|
ENUMDOC
|
|
This is a relocation for two instruction fields holding a register and
|
|
an offset, the equivalent of the relocation.
|
|
ENUM
|
|
BFD_RELOC_MMIX_LOCAL
|
|
ENUMDOC
|
|
This relocation is an assertion that the expression is not allocated as
|
|
a global register. It does not modify contents.
|
|
|
|
ENUM
|
|
BFD_RELOC_AVR_7_PCREL
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the AVR that stores 8 bit pc relative
|
|
short offset into 7 bits.
|
|
ENUM
|
|
BFD_RELOC_AVR_13_PCREL
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the AVR that stores 13 bit pc relative
|
|
short offset into 12 bits.
|
|
ENUM
|
|
BFD_RELOC_AVR_16_PM
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the AVR that stores 17 bit value (usually
|
|
program memory address) into 16 bits.
|
|
ENUM
|
|
BFD_RELOC_AVR_LO8_LDI
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the AVR that stores 8 bit value (usually
|
|
data memory address) into 8 bit immediate value of LDI insn.
|
|
ENUM
|
|
BFD_RELOC_AVR_HI8_LDI
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
|
|
of data memory address) into 8 bit immediate value of LDI insn.
|
|
ENUM
|
|
BFD_RELOC_AVR_HH8_LDI
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
|
|
of program memory address) into 8 bit immediate value of LDI insn.
|
|
ENUM
|
|
BFD_RELOC_AVR_MS8_LDI
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
|
|
of 32 bit value) into 8 bit immediate value of LDI insn.
|
|
ENUM
|
|
BFD_RELOC_AVR_LO8_LDI_NEG
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the AVR that stores negated 8 bit value
|
|
(usually data memory address) into 8 bit immediate value of SUBI insn.
|
|
ENUM
|
|
BFD_RELOC_AVR_HI8_LDI_NEG
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the AVR that stores negated 8 bit value
|
|
(high 8 bit of data memory address) into 8 bit immediate value of
|
|
SUBI insn.
|
|
ENUM
|
|
BFD_RELOC_AVR_HH8_LDI_NEG
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the AVR that stores negated 8 bit value
|
|
(most high 8 bit of program memory address) into 8 bit immediate value
|
|
of LDI or SUBI insn.
|
|
ENUM
|
|
BFD_RELOC_AVR_MS8_LDI_NEG
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the AVR that stores negated 8 bit value (msb
|
|
of 32 bit value) into 8 bit immediate value of LDI insn.
|
|
ENUM
|
|
BFD_RELOC_AVR_LO8_LDI_PM
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the AVR that stores 8 bit value (usually
|
|
command address) into 8 bit immediate value of LDI insn.
|
|
ENUM
|
|
BFD_RELOC_AVR_LO8_LDI_GS
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the AVR that stores 8 bit value
|
|
(command address) into 8 bit immediate value of LDI insn. If the address
|
|
is beyond the 128k boundary, the linker inserts a jump stub for this reloc
|
|
in the lower 128k.
|
|
ENUM
|
|
BFD_RELOC_AVR_HI8_LDI_PM
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
|
|
of command address) into 8 bit immediate value of LDI insn.
|
|
ENUM
|
|
BFD_RELOC_AVR_HI8_LDI_GS
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the AVR that stores 8 bit value (high 8 bit
|
|
of command address) into 8 bit immediate value of LDI insn. If the address
|
|
is beyond the 128k boundary, the linker inserts a jump stub for this reloc
|
|
below 128k.
|
|
ENUM
|
|
BFD_RELOC_AVR_HH8_LDI_PM
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the AVR that stores 8 bit value (most high 8 bit
|
|
of command address) into 8 bit immediate value of LDI insn.
|
|
ENUM
|
|
BFD_RELOC_AVR_LO8_LDI_PM_NEG
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the AVR that stores negated 8 bit value
|
|
(usually command address) into 8 bit immediate value of SUBI insn.
|
|
ENUM
|
|
BFD_RELOC_AVR_HI8_LDI_PM_NEG
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the AVR that stores negated 8 bit value
|
|
(high 8 bit of 16 bit command address) into 8 bit immediate value
|
|
of SUBI insn.
|
|
ENUM
|
|
BFD_RELOC_AVR_HH8_LDI_PM_NEG
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the AVR that stores negated 8 bit value
|
|
(high 6 bit of 22 bit command address) into 8 bit immediate
|
|
value of SUBI insn.
|
|
ENUM
|
|
BFD_RELOC_AVR_CALL
|
|
ENUMDOC
|
|
This is a 32 bit reloc for the AVR that stores 23 bit value
|
|
into 22 bits.
|
|
ENUM
|
|
BFD_RELOC_AVR_LDI
|
|
ENUMDOC
|
|
This is a 16 bit reloc for the AVR that stores all needed bits
|
|
for absolute addressing with ldi with overflow check to linktime
|
|
ENUM
|
|
BFD_RELOC_AVR_6
|
|
ENUMDOC
|
|
This is a 6 bit reloc for the AVR that stores offset for ldd/std
|
|
instructions
|
|
ENUM
|
|
BFD_RELOC_AVR_6_ADIW
|
|
ENUMDOC
|
|
This is a 6 bit reloc for the AVR that stores offset for adiw/sbiw
|
|
instructions
|
|
ENUM
|
|
BFD_RELOC_AVR_8_LO
|
|
ENUMDOC
|
|
This is a 8 bit reloc for the AVR that stores bits 0..7 of a symbol
|
|
in .byte lo8(symbol)
|
|
ENUM
|
|
BFD_RELOC_AVR_8_HI
|
|
ENUMDOC
|
|
This is a 8 bit reloc for the AVR that stores bits 8..15 of a symbol
|
|
in .byte hi8(symbol)
|
|
ENUM
|
|
BFD_RELOC_AVR_8_HLO
|
|
ENUMDOC
|
|
This is a 8 bit reloc for the AVR that stores bits 16..23 of a symbol
|
|
in .byte hlo8(symbol)
|
|
ENUM
|
|
BFD_RELOC_AVR_DIFF8
|
|
ENUMX
|
|
BFD_RELOC_AVR_DIFF16
|
|
ENUMX
|
|
BFD_RELOC_AVR_DIFF32
|
|
ENUMDOC
|
|
AVR relocations to mark the difference of two local symbols.
|
|
These are only needed to support linker relaxation and can be ignored
|
|
when not relaxing. The field is set to the value of the difference
|
|
assuming no relaxation. The relocation encodes the position of the
|
|
second symbol so the linker can determine whether to adjust the field
|
|
value.
|
|
ENUM
|
|
BFD_RELOC_RL78_NEG8
|
|
ENUMX
|
|
BFD_RELOC_RL78_NEG16
|
|
ENUMX
|
|
BFD_RELOC_RL78_NEG24
|
|
ENUMX
|
|
BFD_RELOC_RL78_NEG32
|
|
ENUMX
|
|
BFD_RELOC_RL78_16_OP
|
|
ENUMX
|
|
BFD_RELOC_RL78_24_OP
|
|
ENUMX
|
|
BFD_RELOC_RL78_32_OP
|
|
ENUMX
|
|
BFD_RELOC_RL78_8U
|
|
ENUMX
|
|
BFD_RELOC_RL78_16U
|
|
ENUMX
|
|
BFD_RELOC_RL78_24U
|
|
ENUMX
|
|
BFD_RELOC_RL78_DIR3U_PCREL
|
|
ENUMX
|
|
BFD_RELOC_RL78_DIFF
|
|
ENUMX
|
|
BFD_RELOC_RL78_GPRELB
|
|
ENUMX
|
|
BFD_RELOC_RL78_GPRELW
|
|
ENUMX
|
|
BFD_RELOC_RL78_GPRELL
|
|
ENUMX
|
|
BFD_RELOC_RL78_SYM
|
|
ENUMX
|
|
BFD_RELOC_RL78_OP_SUBTRACT
|
|
ENUMX
|
|
BFD_RELOC_RL78_OP_NEG
|
|
ENUMX
|
|
BFD_RELOC_RL78_OP_AND
|
|
ENUMX
|
|
BFD_RELOC_RL78_OP_SHRA
|
|
ENUMX
|
|
BFD_RELOC_RL78_ABS8
|
|
ENUMX
|
|
BFD_RELOC_RL78_ABS16
|
|
ENUMX
|
|
BFD_RELOC_RL78_ABS16_REV
|
|
ENUMX
|
|
BFD_RELOC_RL78_ABS32
|
|
ENUMX
|
|
BFD_RELOC_RL78_ABS32_REV
|
|
ENUMX
|
|
BFD_RELOC_RL78_ABS16U
|
|
ENUMX
|
|
BFD_RELOC_RL78_ABS16UW
|
|
ENUMX
|
|
BFD_RELOC_RL78_ABS16UL
|
|
ENUMX
|
|
BFD_RELOC_RL78_RELAX
|
|
ENUMX
|
|
BFD_RELOC_RL78_HI16
|
|
ENUMX
|
|
BFD_RELOC_RL78_HI8
|
|
ENUMX
|
|
BFD_RELOC_RL78_LO16
|
|
ENUMX
|
|
BFD_RELOC_RL78_CODE
|
|
ENUMDOC
|
|
Renesas RL78 Relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_RX_NEG8
|
|
ENUMX
|
|
BFD_RELOC_RX_NEG16
|
|
ENUMX
|
|
BFD_RELOC_RX_NEG24
|
|
ENUMX
|
|
BFD_RELOC_RX_NEG32
|
|
ENUMX
|
|
BFD_RELOC_RX_16_OP
|
|
ENUMX
|
|
BFD_RELOC_RX_24_OP
|
|
ENUMX
|
|
BFD_RELOC_RX_32_OP
|
|
ENUMX
|
|
BFD_RELOC_RX_8U
|
|
ENUMX
|
|
BFD_RELOC_RX_16U
|
|
ENUMX
|
|
BFD_RELOC_RX_24U
|
|
ENUMX
|
|
BFD_RELOC_RX_DIR3U_PCREL
|
|
ENUMX
|
|
BFD_RELOC_RX_DIFF
|
|
ENUMX
|
|
BFD_RELOC_RX_GPRELB
|
|
ENUMX
|
|
BFD_RELOC_RX_GPRELW
|
|
ENUMX
|
|
BFD_RELOC_RX_GPRELL
|
|
ENUMX
|
|
BFD_RELOC_RX_SYM
|
|
ENUMX
|
|
BFD_RELOC_RX_OP_SUBTRACT
|
|
ENUMX
|
|
BFD_RELOC_RX_OP_NEG
|
|
ENUMX
|
|
BFD_RELOC_RX_ABS8
|
|
ENUMX
|
|
BFD_RELOC_RX_ABS16
|
|
ENUMX
|
|
BFD_RELOC_RX_ABS16_REV
|
|
ENUMX
|
|
BFD_RELOC_RX_ABS32
|
|
ENUMX
|
|
BFD_RELOC_RX_ABS32_REV
|
|
ENUMX
|
|
BFD_RELOC_RX_ABS16U
|
|
ENUMX
|
|
BFD_RELOC_RX_ABS16UW
|
|
ENUMX
|
|
BFD_RELOC_RX_ABS16UL
|
|
ENUMX
|
|
BFD_RELOC_RX_RELAX
|
|
ENUMDOC
|
|
Renesas RX Relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_390_12
|
|
ENUMDOC
|
|
Direct 12 bit.
|
|
ENUM
|
|
BFD_RELOC_390_GOT12
|
|
ENUMDOC
|
|
12 bit GOT offset.
|
|
ENUM
|
|
BFD_RELOC_390_PLT32
|
|
ENUMDOC
|
|
32 bit PC relative PLT address.
|
|
ENUM
|
|
BFD_RELOC_390_COPY
|
|
ENUMDOC
|
|
Copy symbol at runtime.
|
|
ENUM
|
|
BFD_RELOC_390_GLOB_DAT
|
|
ENUMDOC
|
|
Create GOT entry.
|
|
ENUM
|
|
BFD_RELOC_390_JMP_SLOT
|
|
ENUMDOC
|
|
Create PLT entry.
|
|
ENUM
|
|
BFD_RELOC_390_RELATIVE
|
|
ENUMDOC
|
|
Adjust by program base.
|
|
ENUM
|
|
BFD_RELOC_390_GOTPC
|
|
ENUMDOC
|
|
32 bit PC relative offset to GOT.
|
|
ENUM
|
|
BFD_RELOC_390_GOT16
|
|
ENUMDOC
|
|
16 bit GOT offset.
|
|
ENUM
|
|
BFD_RELOC_390_PC12DBL
|
|
ENUMDOC
|
|
PC relative 12 bit shifted by 1.
|
|
ENUM
|
|
BFD_RELOC_390_PLT12DBL
|
|
ENUMDOC
|
|
12 bit PC rel. PLT shifted by 1.
|
|
ENUM
|
|
BFD_RELOC_390_PC16DBL
|
|
ENUMDOC
|
|
PC relative 16 bit shifted by 1.
|
|
ENUM
|
|
BFD_RELOC_390_PLT16DBL
|
|
ENUMDOC
|
|
16 bit PC rel. PLT shifted by 1.
|
|
ENUM
|
|
BFD_RELOC_390_PC24DBL
|
|
ENUMDOC
|
|
PC relative 24 bit shifted by 1.
|
|
ENUM
|
|
BFD_RELOC_390_PLT24DBL
|
|
ENUMDOC
|
|
24 bit PC rel. PLT shifted by 1.
|
|
ENUM
|
|
BFD_RELOC_390_PC32DBL
|
|
ENUMDOC
|
|
PC relative 32 bit shifted by 1.
|
|
ENUM
|
|
BFD_RELOC_390_PLT32DBL
|
|
ENUMDOC
|
|
32 bit PC rel. PLT shifted by 1.
|
|
ENUM
|
|
BFD_RELOC_390_GOTPCDBL
|
|
ENUMDOC
|
|
32 bit PC rel. GOT shifted by 1.
|
|
ENUM
|
|
BFD_RELOC_390_GOT64
|
|
ENUMDOC
|
|
64 bit GOT offset.
|
|
ENUM
|
|
BFD_RELOC_390_PLT64
|
|
ENUMDOC
|
|
64 bit PC relative PLT address.
|
|
ENUM
|
|
BFD_RELOC_390_GOTENT
|
|
ENUMDOC
|
|
32 bit rel. offset to GOT entry.
|
|
ENUM
|
|
BFD_RELOC_390_GOTOFF64
|
|
ENUMDOC
|
|
64 bit offset to GOT.
|
|
ENUM
|
|
BFD_RELOC_390_GOTPLT12
|
|
ENUMDOC
|
|
12-bit offset to symbol-entry within GOT, with PLT handling.
|
|
ENUM
|
|
BFD_RELOC_390_GOTPLT16
|
|
ENUMDOC
|
|
16-bit offset to symbol-entry within GOT, with PLT handling.
|
|
ENUM
|
|
BFD_RELOC_390_GOTPLT32
|
|
ENUMDOC
|
|
32-bit offset to symbol-entry within GOT, with PLT handling.
|
|
ENUM
|
|
BFD_RELOC_390_GOTPLT64
|
|
ENUMDOC
|
|
64-bit offset to symbol-entry within GOT, with PLT handling.
|
|
ENUM
|
|
BFD_RELOC_390_GOTPLTENT
|
|
ENUMDOC
|
|
32-bit rel. offset to symbol-entry within GOT, with PLT handling.
|
|
ENUM
|
|
BFD_RELOC_390_PLTOFF16
|
|
ENUMDOC
|
|
16-bit rel. offset from the GOT to a PLT entry.
|
|
ENUM
|
|
BFD_RELOC_390_PLTOFF32
|
|
ENUMDOC
|
|
32-bit rel. offset from the GOT to a PLT entry.
|
|
ENUM
|
|
BFD_RELOC_390_PLTOFF64
|
|
ENUMDOC
|
|
64-bit rel. offset from the GOT to a PLT entry.
|
|
|
|
ENUM
|
|
BFD_RELOC_390_TLS_LOAD
|
|
ENUMX
|
|
BFD_RELOC_390_TLS_GDCALL
|
|
ENUMX
|
|
BFD_RELOC_390_TLS_LDCALL
|
|
ENUMX
|
|
BFD_RELOC_390_TLS_GD32
|
|
ENUMX
|
|
BFD_RELOC_390_TLS_GD64
|
|
ENUMX
|
|
BFD_RELOC_390_TLS_GOTIE12
|
|
ENUMX
|
|
BFD_RELOC_390_TLS_GOTIE32
|
|
ENUMX
|
|
BFD_RELOC_390_TLS_GOTIE64
|
|
ENUMX
|
|
BFD_RELOC_390_TLS_LDM32
|
|
ENUMX
|
|
BFD_RELOC_390_TLS_LDM64
|
|
ENUMX
|
|
BFD_RELOC_390_TLS_IE32
|
|
ENUMX
|
|
BFD_RELOC_390_TLS_IE64
|
|
ENUMX
|
|
BFD_RELOC_390_TLS_IEENT
|
|
ENUMX
|
|
BFD_RELOC_390_TLS_LE32
|
|
ENUMX
|
|
BFD_RELOC_390_TLS_LE64
|
|
ENUMX
|
|
BFD_RELOC_390_TLS_LDO32
|
|
ENUMX
|
|
BFD_RELOC_390_TLS_LDO64
|
|
ENUMX
|
|
BFD_RELOC_390_TLS_DTPMOD
|
|
ENUMX
|
|
BFD_RELOC_390_TLS_DTPOFF
|
|
ENUMX
|
|
BFD_RELOC_390_TLS_TPOFF
|
|
ENUMDOC
|
|
s390 tls relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_390_20
|
|
ENUMX
|
|
BFD_RELOC_390_GOT20
|
|
ENUMX
|
|
BFD_RELOC_390_GOTPLT20
|
|
ENUMX
|
|
BFD_RELOC_390_TLS_GOTIE20
|
|
ENUMDOC
|
|
Long displacement extension.
|
|
|
|
ENUM
|
|
BFD_RELOC_390_IRELATIVE
|
|
ENUMDOC
|
|
STT_GNU_IFUNC relocation.
|
|
|
|
ENUM
|
|
BFD_RELOC_SCORE_GPREL15
|
|
ENUMDOC
|
|
Score relocations
|
|
Low 16 bit for load/store
|
|
ENUM
|
|
BFD_RELOC_SCORE_DUMMY2
|
|
ENUMX
|
|
BFD_RELOC_SCORE_JMP
|
|
ENUMDOC
|
|
This is a 24-bit reloc with the right 1 bit assumed to be 0
|
|
ENUM
|
|
BFD_RELOC_SCORE_BRANCH
|
|
ENUMDOC
|
|
This is a 19-bit reloc with the right 1 bit assumed to be 0
|
|
ENUM
|
|
BFD_RELOC_SCORE_IMM30
|
|
ENUMDOC
|
|
This is a 32-bit reloc for 48-bit instructions.
|
|
ENUM
|
|
BFD_RELOC_SCORE_IMM32
|
|
ENUMDOC
|
|
This is a 32-bit reloc for 48-bit instructions.
|
|
ENUM
|
|
BFD_RELOC_SCORE16_JMP
|
|
ENUMDOC
|
|
This is a 11-bit reloc with the right 1 bit assumed to be 0
|
|
ENUM
|
|
BFD_RELOC_SCORE16_BRANCH
|
|
ENUMDOC
|
|
This is a 8-bit reloc with the right 1 bit assumed to be 0
|
|
ENUM
|
|
BFD_RELOC_SCORE_BCMP
|
|
ENUMDOC
|
|
This is a 9-bit reloc with the right 1 bit assumed to be 0
|
|
ENUM
|
|
BFD_RELOC_SCORE_GOT15
|
|
ENUMX
|
|
BFD_RELOC_SCORE_GOT_LO16
|
|
ENUMX
|
|
BFD_RELOC_SCORE_CALL15
|
|
ENUMX
|
|
BFD_RELOC_SCORE_DUMMY_HI16
|
|
ENUMDOC
|
|
Undocumented Score relocs
|
|
|
|
ENUM
|
|
BFD_RELOC_IP2K_FR9
|
|
ENUMDOC
|
|
Scenix IP2K - 9-bit register number / data address
|
|
ENUM
|
|
BFD_RELOC_IP2K_BANK
|
|
ENUMDOC
|
|
Scenix IP2K - 4-bit register/data bank number
|
|
ENUM
|
|
BFD_RELOC_IP2K_ADDR16CJP
|
|
ENUMDOC
|
|
Scenix IP2K - low 13 bits of instruction word address
|
|
ENUM
|
|
BFD_RELOC_IP2K_PAGE3
|
|
ENUMDOC
|
|
Scenix IP2K - high 3 bits of instruction word address
|
|
ENUM
|
|
BFD_RELOC_IP2K_LO8DATA
|
|
ENUMX
|
|
BFD_RELOC_IP2K_HI8DATA
|
|
ENUMX
|
|
BFD_RELOC_IP2K_EX8DATA
|
|
ENUMDOC
|
|
Scenix IP2K - ext/low/high 8 bits of data address
|
|
ENUM
|
|
BFD_RELOC_IP2K_LO8INSN
|
|
ENUMX
|
|
BFD_RELOC_IP2K_HI8INSN
|
|
ENUMDOC
|
|
Scenix IP2K - low/high 8 bits of instruction word address
|
|
ENUM
|
|
BFD_RELOC_IP2K_PC_SKIP
|
|
ENUMDOC
|
|
Scenix IP2K - even/odd PC modifier to modify snb pcl.0
|
|
ENUM
|
|
BFD_RELOC_IP2K_TEXT
|
|
ENUMDOC
|
|
Scenix IP2K - 16 bit word address in text section.
|
|
ENUM
|
|
BFD_RELOC_IP2K_FR_OFFSET
|
|
ENUMDOC
|
|
Scenix IP2K - 7-bit sp or dp offset
|
|
ENUM
|
|
BFD_RELOC_VPE4KMATH_DATA
|
|
ENUMX
|
|
BFD_RELOC_VPE4KMATH_INSN
|
|
ENUMDOC
|
|
Scenix VPE4K coprocessor - data/insn-space addressing
|
|
|
|
ENUM
|
|
BFD_RELOC_VTABLE_INHERIT
|
|
ENUMX
|
|
BFD_RELOC_VTABLE_ENTRY
|
|
ENUMDOC
|
|
These two relocations are used by the linker to determine which of
|
|
the entries in a C++ virtual function table are actually used. When
|
|
the --gc-sections option is given, the linker will zero out the entries
|
|
that are not used, so that the code for those functions need not be
|
|
included in the output.
|
|
|
|
VTABLE_INHERIT is a zero-space relocation used to describe to the
|
|
linker the inheritance tree of a C++ virtual function table. The
|
|
relocation's symbol should be the parent class' vtable, and the
|
|
relocation should be located at the child vtable.
|
|
|
|
VTABLE_ENTRY is a zero-space relocation that describes the use of a
|
|
virtual function table entry. The reloc's symbol should refer to the
|
|
table of the class mentioned in the code. Off of that base, an offset
|
|
describes the entry that is being used. For Rela hosts, this offset
|
|
is stored in the reloc's addend. For Rel hosts, we are forced to put
|
|
this offset in the reloc's section offset.
|
|
|
|
ENUM
|
|
BFD_RELOC_IA64_IMM14
|
|
ENUMX
|
|
BFD_RELOC_IA64_IMM22
|
|
ENUMX
|
|
BFD_RELOC_IA64_IMM64
|
|
ENUMX
|
|
BFD_RELOC_IA64_DIR32MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_DIR32LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_DIR64MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_DIR64LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_GPREL22
|
|
ENUMX
|
|
BFD_RELOC_IA64_GPREL64I
|
|
ENUMX
|
|
BFD_RELOC_IA64_GPREL32MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_GPREL32LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_GPREL64MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_GPREL64LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_LTOFF22
|
|
ENUMX
|
|
BFD_RELOC_IA64_LTOFF64I
|
|
ENUMX
|
|
BFD_RELOC_IA64_PLTOFF22
|
|
ENUMX
|
|
BFD_RELOC_IA64_PLTOFF64I
|
|
ENUMX
|
|
BFD_RELOC_IA64_PLTOFF64MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_PLTOFF64LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_FPTR64I
|
|
ENUMX
|
|
BFD_RELOC_IA64_FPTR32MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_FPTR32LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_FPTR64MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_FPTR64LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_PCREL21B
|
|
ENUMX
|
|
BFD_RELOC_IA64_PCREL21BI
|
|
ENUMX
|
|
BFD_RELOC_IA64_PCREL21M
|
|
ENUMX
|
|
BFD_RELOC_IA64_PCREL21F
|
|
ENUMX
|
|
BFD_RELOC_IA64_PCREL22
|
|
ENUMX
|
|
BFD_RELOC_IA64_PCREL60B
|
|
ENUMX
|
|
BFD_RELOC_IA64_PCREL64I
|
|
ENUMX
|
|
BFD_RELOC_IA64_PCREL32MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_PCREL32LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_PCREL64MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_PCREL64LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_LTOFF_FPTR22
|
|
ENUMX
|
|
BFD_RELOC_IA64_LTOFF_FPTR64I
|
|
ENUMX
|
|
BFD_RELOC_IA64_LTOFF_FPTR32MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_LTOFF_FPTR32LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_LTOFF_FPTR64MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_LTOFF_FPTR64LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_SEGREL32MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_SEGREL32LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_SEGREL64MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_SEGREL64LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_SECREL32MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_SECREL32LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_SECREL64MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_SECREL64LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_REL32MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_REL32LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_REL64MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_REL64LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_LTV32MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_LTV32LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_LTV64MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_LTV64LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_IPLTMSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_IPLTLSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_COPY
|
|
ENUMX
|
|
BFD_RELOC_IA64_LTOFF22X
|
|
ENUMX
|
|
BFD_RELOC_IA64_LDXMOV
|
|
ENUMX
|
|
BFD_RELOC_IA64_TPREL14
|
|
ENUMX
|
|
BFD_RELOC_IA64_TPREL22
|
|
ENUMX
|
|
BFD_RELOC_IA64_TPREL64I
|
|
ENUMX
|
|
BFD_RELOC_IA64_TPREL64MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_TPREL64LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_LTOFF_TPREL22
|
|
ENUMX
|
|
BFD_RELOC_IA64_DTPMOD64MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_DTPMOD64LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_LTOFF_DTPMOD22
|
|
ENUMX
|
|
BFD_RELOC_IA64_DTPREL14
|
|
ENUMX
|
|
BFD_RELOC_IA64_DTPREL22
|
|
ENUMX
|
|
BFD_RELOC_IA64_DTPREL64I
|
|
ENUMX
|
|
BFD_RELOC_IA64_DTPREL32MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_DTPREL32LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_DTPREL64MSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_DTPREL64LSB
|
|
ENUMX
|
|
BFD_RELOC_IA64_LTOFF_DTPREL22
|
|
ENUMDOC
|
|
Intel IA64 Relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_M68HC11_HI8
|
|
ENUMDOC
|
|
Motorola 68HC11 reloc.
|
|
This is the 8 bit high part of an absolute address.
|
|
ENUM
|
|
BFD_RELOC_M68HC11_LO8
|
|
ENUMDOC
|
|
Motorola 68HC11 reloc.
|
|
This is the 8 bit low part of an absolute address.
|
|
ENUM
|
|
BFD_RELOC_M68HC11_3B
|
|
ENUMDOC
|
|
Motorola 68HC11 reloc.
|
|
This is the 3 bit of a value.
|
|
ENUM
|
|
BFD_RELOC_M68HC11_RL_JUMP
|
|
ENUMDOC
|
|
Motorola 68HC11 reloc.
|
|
This reloc marks the beginning of a jump/call instruction.
|
|
It is used for linker relaxation to correctly identify beginning
|
|
of instruction and change some branches to use PC-relative
|
|
addressing mode.
|
|
ENUM
|
|
BFD_RELOC_M68HC11_RL_GROUP
|
|
ENUMDOC
|
|
Motorola 68HC11 reloc.
|
|
This reloc marks a group of several instructions that gcc generates
|
|
and for which the linker relaxation pass can modify and/or remove
|
|
some of them.
|
|
ENUM
|
|
BFD_RELOC_M68HC11_LO16
|
|
ENUMDOC
|
|
Motorola 68HC11 reloc.
|
|
This is the 16-bit lower part of an address. It is used for 'call'
|
|
instruction to specify the symbol address without any special
|
|
transformation (due to memory bank window).
|
|
ENUM
|
|
BFD_RELOC_M68HC11_PAGE
|
|
ENUMDOC
|
|
Motorola 68HC11 reloc.
|
|
This is a 8-bit reloc that specifies the page number of an address.
|
|
It is used by 'call' instruction to specify the page number of
|
|
the symbol.
|
|
ENUM
|
|
BFD_RELOC_M68HC11_24
|
|
ENUMDOC
|
|
Motorola 68HC11 reloc.
|
|
This is a 24-bit reloc that represents the address with a 16-bit
|
|
value and a 8-bit page number. The symbol address is transformed
|
|
to follow the 16K memory bank of 68HC12 (seen as mapped in the window).
|
|
ENUM
|
|
BFD_RELOC_M68HC12_5B
|
|
ENUMDOC
|
|
Motorola 68HC12 reloc.
|
|
This is the 5 bits of a value.
|
|
ENUM
|
|
BFD_RELOC_XGATE_RL_JUMP
|
|
ENUMDOC
|
|
Freescale XGATE reloc.
|
|
This reloc marks the beginning of a bra/jal instruction.
|
|
ENUM
|
|
BFD_RELOC_XGATE_RL_GROUP
|
|
ENUMDOC
|
|
Freescale XGATE reloc.
|
|
This reloc marks a group of several instructions that gcc generates
|
|
and for which the linker relaxation pass can modify and/or remove
|
|
some of them.
|
|
ENUM
|
|
BFD_RELOC_XGATE_LO16
|
|
ENUMDOC
|
|
Freescale XGATE reloc.
|
|
This is the 16-bit lower part of an address. It is used for the '16-bit'
|
|
instructions.
|
|
ENUM
|
|
BFD_RELOC_XGATE_GPAGE
|
|
ENUMDOC
|
|
Freescale XGATE reloc.
|
|
ENUM
|
|
BFD_RELOC_XGATE_24
|
|
ENUMDOC
|
|
Freescale XGATE reloc.
|
|
ENUM
|
|
BFD_RELOC_XGATE_PCREL_9
|
|
ENUMDOC
|
|
Freescale XGATE reloc.
|
|
This is a 9-bit pc-relative reloc.
|
|
ENUM
|
|
BFD_RELOC_XGATE_PCREL_10
|
|
ENUMDOC
|
|
Freescale XGATE reloc.
|
|
This is a 10-bit pc-relative reloc.
|
|
ENUM
|
|
BFD_RELOC_XGATE_IMM8_LO
|
|
ENUMDOC
|
|
Freescale XGATE reloc.
|
|
This is the 16-bit lower part of an address. It is used for the '16-bit'
|
|
instructions.
|
|
ENUM
|
|
BFD_RELOC_XGATE_IMM8_HI
|
|
ENUMDOC
|
|
Freescale XGATE reloc.
|
|
This is the 16-bit higher part of an address. It is used for the '16-bit'
|
|
instructions.
|
|
ENUM
|
|
BFD_RELOC_XGATE_IMM3
|
|
ENUMDOC
|
|
Freescale XGATE reloc.
|
|
This is a 3-bit pc-relative reloc.
|
|
ENUM
|
|
BFD_RELOC_XGATE_IMM4
|
|
ENUMDOC
|
|
Freescale XGATE reloc.
|
|
This is a 4-bit pc-relative reloc.
|
|
ENUM
|
|
BFD_RELOC_XGATE_IMM5
|
|
ENUMDOC
|
|
Freescale XGATE reloc.
|
|
This is a 5-bit pc-relative reloc.
|
|
ENUM
|
|
BFD_RELOC_M68HC12_9B
|
|
ENUMDOC
|
|
Motorola 68HC12 reloc.
|
|
This is the 9 bits of a value.
|
|
ENUM
|
|
BFD_RELOC_M68HC12_16B
|
|
ENUMDOC
|
|
Motorola 68HC12 reloc.
|
|
This is the 16 bits of a value.
|
|
ENUM
|
|
BFD_RELOC_M68HC12_9_PCREL
|
|
ENUMDOC
|
|
Motorola 68HC12/XGATE reloc.
|
|
This is a PCREL9 branch.
|
|
ENUM
|
|
BFD_RELOC_M68HC12_10_PCREL
|
|
ENUMDOC
|
|
Motorola 68HC12/XGATE reloc.
|
|
This is a PCREL10 branch.
|
|
ENUM
|
|
BFD_RELOC_M68HC12_LO8XG
|
|
ENUMDOC
|
|
Motorola 68HC12/XGATE reloc.
|
|
This is the 8 bit low part of an absolute address and immediately precedes
|
|
a matching HI8XG part.
|
|
ENUM
|
|
BFD_RELOC_M68HC12_HI8XG
|
|
ENUMDOC
|
|
Motorola 68HC12/XGATE reloc.
|
|
This is the 8 bit high part of an absolute address and immediately follows
|
|
a matching LO8XG part.
|
|
ENUM
|
|
BFD_RELOC_16C_NUM08
|
|
ENUMX
|
|
BFD_RELOC_16C_NUM08_C
|
|
ENUMX
|
|
BFD_RELOC_16C_NUM16
|
|
ENUMX
|
|
BFD_RELOC_16C_NUM16_C
|
|
ENUMX
|
|
BFD_RELOC_16C_NUM32
|
|
ENUMX
|
|
BFD_RELOC_16C_NUM32_C
|
|
ENUMX
|
|
BFD_RELOC_16C_DISP04
|
|
ENUMX
|
|
BFD_RELOC_16C_DISP04_C
|
|
ENUMX
|
|
BFD_RELOC_16C_DISP08
|
|
ENUMX
|
|
BFD_RELOC_16C_DISP08_C
|
|
ENUMX
|
|
BFD_RELOC_16C_DISP16
|
|
ENUMX
|
|
BFD_RELOC_16C_DISP16_C
|
|
ENUMX
|
|
BFD_RELOC_16C_DISP24
|
|
ENUMX
|
|
BFD_RELOC_16C_DISP24_C
|
|
ENUMX
|
|
BFD_RELOC_16C_DISP24a
|
|
ENUMX
|
|
BFD_RELOC_16C_DISP24a_C
|
|
ENUMX
|
|
BFD_RELOC_16C_REG04
|
|
ENUMX
|
|
BFD_RELOC_16C_REG04_C
|
|
ENUMX
|
|
BFD_RELOC_16C_REG04a
|
|
ENUMX
|
|
BFD_RELOC_16C_REG04a_C
|
|
ENUMX
|
|
BFD_RELOC_16C_REG14
|
|
ENUMX
|
|
BFD_RELOC_16C_REG14_C
|
|
ENUMX
|
|
BFD_RELOC_16C_REG16
|
|
ENUMX
|
|
BFD_RELOC_16C_REG16_C
|
|
ENUMX
|
|
BFD_RELOC_16C_REG20
|
|
ENUMX
|
|
BFD_RELOC_16C_REG20_C
|
|
ENUMX
|
|
BFD_RELOC_16C_ABS20
|
|
ENUMX
|
|
BFD_RELOC_16C_ABS20_C
|
|
ENUMX
|
|
BFD_RELOC_16C_ABS24
|
|
ENUMX
|
|
BFD_RELOC_16C_ABS24_C
|
|
ENUMX
|
|
BFD_RELOC_16C_IMM04
|
|
ENUMX
|
|
BFD_RELOC_16C_IMM04_C
|
|
ENUMX
|
|
BFD_RELOC_16C_IMM16
|
|
ENUMX
|
|
BFD_RELOC_16C_IMM16_C
|
|
ENUMX
|
|
BFD_RELOC_16C_IMM20
|
|
ENUMX
|
|
BFD_RELOC_16C_IMM20_C
|
|
ENUMX
|
|
BFD_RELOC_16C_IMM24
|
|
ENUMX
|
|
BFD_RELOC_16C_IMM24_C
|
|
ENUMX
|
|
BFD_RELOC_16C_IMM32
|
|
ENUMX
|
|
BFD_RELOC_16C_IMM32_C
|
|
ENUMDOC
|
|
NS CR16C Relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_CR16_NUM8
|
|
ENUMX
|
|
BFD_RELOC_CR16_NUM16
|
|
ENUMX
|
|
BFD_RELOC_CR16_NUM32
|
|
ENUMX
|
|
BFD_RELOC_CR16_NUM32a
|
|
ENUMX
|
|
BFD_RELOC_CR16_REGREL0
|
|
ENUMX
|
|
BFD_RELOC_CR16_REGREL4
|
|
ENUMX
|
|
BFD_RELOC_CR16_REGREL4a
|
|
ENUMX
|
|
BFD_RELOC_CR16_REGREL14
|
|
ENUMX
|
|
BFD_RELOC_CR16_REGREL14a
|
|
ENUMX
|
|
BFD_RELOC_CR16_REGREL16
|
|
ENUMX
|
|
BFD_RELOC_CR16_REGREL20
|
|
ENUMX
|
|
BFD_RELOC_CR16_REGREL20a
|
|
ENUMX
|
|
BFD_RELOC_CR16_ABS20
|
|
ENUMX
|
|
BFD_RELOC_CR16_ABS24
|
|
ENUMX
|
|
BFD_RELOC_CR16_IMM4
|
|
ENUMX
|
|
BFD_RELOC_CR16_IMM8
|
|
ENUMX
|
|
BFD_RELOC_CR16_IMM16
|
|
ENUMX
|
|
BFD_RELOC_CR16_IMM20
|
|
ENUMX
|
|
BFD_RELOC_CR16_IMM24
|
|
ENUMX
|
|
BFD_RELOC_CR16_IMM32
|
|
ENUMX
|
|
BFD_RELOC_CR16_IMM32a
|
|
ENUMX
|
|
BFD_RELOC_CR16_DISP4
|
|
ENUMX
|
|
BFD_RELOC_CR16_DISP8
|
|
ENUMX
|
|
BFD_RELOC_CR16_DISP16
|
|
ENUMX
|
|
BFD_RELOC_CR16_DISP20
|
|
ENUMX
|
|
BFD_RELOC_CR16_DISP24
|
|
ENUMX
|
|
BFD_RELOC_CR16_DISP24a
|
|
ENUMX
|
|
BFD_RELOC_CR16_SWITCH8
|
|
ENUMX
|
|
BFD_RELOC_CR16_SWITCH16
|
|
ENUMX
|
|
BFD_RELOC_CR16_SWITCH32
|
|
ENUMX
|
|
BFD_RELOC_CR16_GOT_REGREL20
|
|
ENUMX
|
|
BFD_RELOC_CR16_GOTC_REGREL20
|
|
ENUMX
|
|
BFD_RELOC_CR16_GLOB_DAT
|
|
ENUMDOC
|
|
NS CR16 Relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_CRX_REL4
|
|
ENUMX
|
|
BFD_RELOC_CRX_REL8
|
|
ENUMX
|
|
BFD_RELOC_CRX_REL8_CMP
|
|
ENUMX
|
|
BFD_RELOC_CRX_REL16
|
|
ENUMX
|
|
BFD_RELOC_CRX_REL24
|
|
ENUMX
|
|
BFD_RELOC_CRX_REL32
|
|
ENUMX
|
|
BFD_RELOC_CRX_REGREL12
|
|
ENUMX
|
|
BFD_RELOC_CRX_REGREL22
|
|
ENUMX
|
|
BFD_RELOC_CRX_REGREL28
|
|
ENUMX
|
|
BFD_RELOC_CRX_REGREL32
|
|
ENUMX
|
|
BFD_RELOC_CRX_ABS16
|
|
ENUMX
|
|
BFD_RELOC_CRX_ABS32
|
|
ENUMX
|
|
BFD_RELOC_CRX_NUM8
|
|
ENUMX
|
|
BFD_RELOC_CRX_NUM16
|
|
ENUMX
|
|
BFD_RELOC_CRX_NUM32
|
|
ENUMX
|
|
BFD_RELOC_CRX_IMM16
|
|
ENUMX
|
|
BFD_RELOC_CRX_IMM32
|
|
ENUMX
|
|
BFD_RELOC_CRX_SWITCH8
|
|
ENUMX
|
|
BFD_RELOC_CRX_SWITCH16
|
|
ENUMX
|
|
BFD_RELOC_CRX_SWITCH32
|
|
ENUMDOC
|
|
NS CRX Relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_CRIS_BDISP8
|
|
ENUMX
|
|
BFD_RELOC_CRIS_UNSIGNED_5
|
|
ENUMX
|
|
BFD_RELOC_CRIS_SIGNED_6
|
|
ENUMX
|
|
BFD_RELOC_CRIS_UNSIGNED_6
|
|
ENUMX
|
|
BFD_RELOC_CRIS_SIGNED_8
|
|
ENUMX
|
|
BFD_RELOC_CRIS_UNSIGNED_8
|
|
ENUMX
|
|
BFD_RELOC_CRIS_SIGNED_16
|
|
ENUMX
|
|
BFD_RELOC_CRIS_UNSIGNED_16
|
|
ENUMX
|
|
BFD_RELOC_CRIS_LAPCQ_OFFSET
|
|
ENUMX
|
|
BFD_RELOC_CRIS_UNSIGNED_4
|
|
ENUMDOC
|
|
These relocs are only used within the CRIS assembler. They are not
|
|
(at present) written to any object files.
|
|
ENUM
|
|
BFD_RELOC_CRIS_COPY
|
|
ENUMX
|
|
BFD_RELOC_CRIS_GLOB_DAT
|
|
ENUMX
|
|
BFD_RELOC_CRIS_JUMP_SLOT
|
|
ENUMX
|
|
BFD_RELOC_CRIS_RELATIVE
|
|
ENUMDOC
|
|
Relocs used in ELF shared libraries for CRIS.
|
|
ENUM
|
|
BFD_RELOC_CRIS_32_GOT
|
|
ENUMDOC
|
|
32-bit offset to symbol-entry within GOT.
|
|
ENUM
|
|
BFD_RELOC_CRIS_16_GOT
|
|
ENUMDOC
|
|
16-bit offset to symbol-entry within GOT.
|
|
ENUM
|
|
BFD_RELOC_CRIS_32_GOTPLT
|
|
ENUMDOC
|
|
32-bit offset to symbol-entry within GOT, with PLT handling.
|
|
ENUM
|
|
BFD_RELOC_CRIS_16_GOTPLT
|
|
ENUMDOC
|
|
16-bit offset to symbol-entry within GOT, with PLT handling.
|
|
ENUM
|
|
BFD_RELOC_CRIS_32_GOTREL
|
|
ENUMDOC
|
|
32-bit offset to symbol, relative to GOT.
|
|
ENUM
|
|
BFD_RELOC_CRIS_32_PLT_GOTREL
|
|
ENUMDOC
|
|
32-bit offset to symbol with PLT entry, relative to GOT.
|
|
ENUM
|
|
BFD_RELOC_CRIS_32_PLT_PCREL
|
|
ENUMDOC
|
|
32-bit offset to symbol with PLT entry, relative to this relocation.
|
|
|
|
ENUM
|
|
BFD_RELOC_CRIS_32_GOT_GD
|
|
ENUMX
|
|
BFD_RELOC_CRIS_16_GOT_GD
|
|
ENUMX
|
|
BFD_RELOC_CRIS_32_GD
|
|
ENUMX
|
|
BFD_RELOC_CRIS_DTP
|
|
ENUMX
|
|
BFD_RELOC_CRIS_32_DTPREL
|
|
ENUMX
|
|
BFD_RELOC_CRIS_16_DTPREL
|
|
ENUMX
|
|
BFD_RELOC_CRIS_32_GOT_TPREL
|
|
ENUMX
|
|
BFD_RELOC_CRIS_16_GOT_TPREL
|
|
ENUMX
|
|
BFD_RELOC_CRIS_32_TPREL
|
|
ENUMX
|
|
BFD_RELOC_CRIS_16_TPREL
|
|
ENUMX
|
|
BFD_RELOC_CRIS_DTPMOD
|
|
ENUMX
|
|
BFD_RELOC_CRIS_32_IE
|
|
ENUMDOC
|
|
Relocs used in TLS code for CRIS.
|
|
|
|
ENUM
|
|
BFD_RELOC_860_COPY
|
|
ENUMX
|
|
BFD_RELOC_860_GLOB_DAT
|
|
ENUMX
|
|
BFD_RELOC_860_JUMP_SLOT
|
|
ENUMX
|
|
BFD_RELOC_860_RELATIVE
|
|
ENUMX
|
|
BFD_RELOC_860_PC26
|
|
ENUMX
|
|
BFD_RELOC_860_PLT26
|
|
ENUMX
|
|
BFD_RELOC_860_PC16
|
|
ENUMX
|
|
BFD_RELOC_860_LOW0
|
|
ENUMX
|
|
BFD_RELOC_860_SPLIT0
|
|
ENUMX
|
|
BFD_RELOC_860_LOW1
|
|
ENUMX
|
|
BFD_RELOC_860_SPLIT1
|
|
ENUMX
|
|
BFD_RELOC_860_LOW2
|
|
ENUMX
|
|
BFD_RELOC_860_SPLIT2
|
|
ENUMX
|
|
BFD_RELOC_860_LOW3
|
|
ENUMX
|
|
BFD_RELOC_860_LOGOT0
|
|
ENUMX
|
|
BFD_RELOC_860_SPGOT0
|
|
ENUMX
|
|
BFD_RELOC_860_LOGOT1
|
|
ENUMX
|
|
BFD_RELOC_860_SPGOT1
|
|
ENUMX
|
|
BFD_RELOC_860_LOGOTOFF0
|
|
ENUMX
|
|
BFD_RELOC_860_SPGOTOFF0
|
|
ENUMX
|
|
BFD_RELOC_860_LOGOTOFF1
|
|
ENUMX
|
|
BFD_RELOC_860_SPGOTOFF1
|
|
ENUMX
|
|
BFD_RELOC_860_LOGOTOFF2
|
|
ENUMX
|
|
BFD_RELOC_860_LOGOTOFF3
|
|
ENUMX
|
|
BFD_RELOC_860_LOPC
|
|
ENUMX
|
|
BFD_RELOC_860_HIGHADJ
|
|
ENUMX
|
|
BFD_RELOC_860_HAGOT
|
|
ENUMX
|
|
BFD_RELOC_860_HAGOTOFF
|
|
ENUMX
|
|
BFD_RELOC_860_HAPC
|
|
ENUMX
|
|
BFD_RELOC_860_HIGH
|
|
ENUMX
|
|
BFD_RELOC_860_HIGOT
|
|
ENUMX
|
|
BFD_RELOC_860_HIGOTOFF
|
|
ENUMDOC
|
|
Intel i860 Relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_OR1K_REL_26
|
|
ENUMX
|
|
BFD_RELOC_OR1K_GOTPC_HI16
|
|
ENUMX
|
|
BFD_RELOC_OR1K_GOTPC_LO16
|
|
ENUMX
|
|
BFD_RELOC_OR1K_GOT16
|
|
ENUMX
|
|
BFD_RELOC_OR1K_PLT26
|
|
ENUMX
|
|
BFD_RELOC_OR1K_GOTOFF_HI16
|
|
ENUMX
|
|
BFD_RELOC_OR1K_GOTOFF_LO16
|
|
ENUMX
|
|
BFD_RELOC_OR1K_COPY
|
|
ENUMX
|
|
BFD_RELOC_OR1K_GLOB_DAT
|
|
ENUMX
|
|
BFD_RELOC_OR1K_JMP_SLOT
|
|
ENUMX
|
|
BFD_RELOC_OR1K_RELATIVE
|
|
ENUMX
|
|
BFD_RELOC_OR1K_TLS_GD_HI16
|
|
ENUMX
|
|
BFD_RELOC_OR1K_TLS_GD_LO16
|
|
ENUMX
|
|
BFD_RELOC_OR1K_TLS_LDM_HI16
|
|
ENUMX
|
|
BFD_RELOC_OR1K_TLS_LDM_LO16
|
|
ENUMX
|
|
BFD_RELOC_OR1K_TLS_LDO_HI16
|
|
ENUMX
|
|
BFD_RELOC_OR1K_TLS_LDO_LO16
|
|
ENUMX
|
|
BFD_RELOC_OR1K_TLS_IE_HI16
|
|
ENUMX
|
|
BFD_RELOC_OR1K_TLS_IE_LO16
|
|
ENUMX
|
|
BFD_RELOC_OR1K_TLS_LE_HI16
|
|
ENUMX
|
|
BFD_RELOC_OR1K_TLS_LE_LO16
|
|
ENUMX
|
|
BFD_RELOC_OR1K_TLS_TPOFF
|
|
ENUMX
|
|
BFD_RELOC_OR1K_TLS_DTPOFF
|
|
ENUMX
|
|
BFD_RELOC_OR1K_TLS_DTPMOD
|
|
ENUMDOC
|
|
OpenRISC 1000 Relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_H8_DIR16A8
|
|
ENUMX
|
|
BFD_RELOC_H8_DIR16R8
|
|
ENUMX
|
|
BFD_RELOC_H8_DIR24A8
|
|
ENUMX
|
|
BFD_RELOC_H8_DIR24R8
|
|
ENUMX
|
|
BFD_RELOC_H8_DIR32A16
|
|
ENUMX
|
|
BFD_RELOC_H8_DISP32A16
|
|
ENUMDOC
|
|
H8 elf Relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_XSTORMY16_REL_12
|
|
ENUMX
|
|
BFD_RELOC_XSTORMY16_12
|
|
ENUMX
|
|
BFD_RELOC_XSTORMY16_24
|
|
ENUMX
|
|
BFD_RELOC_XSTORMY16_FPTR16
|
|
ENUMDOC
|
|
Sony Xstormy16 Relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_RELC
|
|
ENUMDOC
|
|
Self-describing complex relocations.
|
|
COMMENT
|
|
|
|
ENUM
|
|
BFD_RELOC_XC16X_PAG
|
|
ENUMX
|
|
BFD_RELOC_XC16X_POF
|
|
ENUMX
|
|
BFD_RELOC_XC16X_SEG
|
|
ENUMX
|
|
BFD_RELOC_XC16X_SOF
|
|
ENUMDOC
|
|
Infineon Relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_VAX_GLOB_DAT
|
|
ENUMX
|
|
BFD_RELOC_VAX_JMP_SLOT
|
|
ENUMX
|
|
BFD_RELOC_VAX_RELATIVE
|
|
ENUMDOC
|
|
Relocations used by VAX ELF.
|
|
|
|
ENUM
|
|
BFD_RELOC_MT_PC16
|
|
ENUMDOC
|
|
Morpho MT - 16 bit immediate relocation.
|
|
ENUM
|
|
BFD_RELOC_MT_HI16
|
|
ENUMDOC
|
|
Morpho MT - Hi 16 bits of an address.
|
|
ENUM
|
|
BFD_RELOC_MT_LO16
|
|
ENUMDOC
|
|
Morpho MT - Low 16 bits of an address.
|
|
ENUM
|
|
BFD_RELOC_MT_GNU_VTINHERIT
|
|
ENUMDOC
|
|
Morpho MT - Used to tell the linker which vtable entries are used.
|
|
ENUM
|
|
BFD_RELOC_MT_GNU_VTENTRY
|
|
ENUMDOC
|
|
Morpho MT - Used to tell the linker which vtable entries are used.
|
|
ENUM
|
|
BFD_RELOC_MT_PCINSN8
|
|
ENUMDOC
|
|
Morpho MT - 8 bit immediate relocation.
|
|
|
|
ENUM
|
|
BFD_RELOC_MSP430_10_PCREL
|
|
ENUMX
|
|
BFD_RELOC_MSP430_16_PCREL
|
|
ENUMX
|
|
BFD_RELOC_MSP430_16
|
|
ENUMX
|
|
BFD_RELOC_MSP430_16_PCREL_BYTE
|
|
ENUMX
|
|
BFD_RELOC_MSP430_16_BYTE
|
|
ENUMX
|
|
BFD_RELOC_MSP430_2X_PCREL
|
|
ENUMX
|
|
BFD_RELOC_MSP430_RL_PCREL
|
|
ENUMX
|
|
BFD_RELOC_MSP430_ABS8
|
|
ENUMX
|
|
BFD_RELOC_MSP430X_PCR20_EXT_SRC
|
|
ENUMX
|
|
BFD_RELOC_MSP430X_PCR20_EXT_DST
|
|
ENUMX
|
|
BFD_RELOC_MSP430X_PCR20_EXT_ODST
|
|
ENUMX
|
|
BFD_RELOC_MSP430X_ABS20_EXT_SRC
|
|
ENUMX
|
|
BFD_RELOC_MSP430X_ABS20_EXT_DST
|
|
ENUMX
|
|
BFD_RELOC_MSP430X_ABS20_EXT_ODST
|
|
ENUMX
|
|
BFD_RELOC_MSP430X_ABS20_ADR_SRC
|
|
ENUMX
|
|
BFD_RELOC_MSP430X_ABS20_ADR_DST
|
|
ENUMX
|
|
BFD_RELOC_MSP430X_PCR16
|
|
ENUMX
|
|
BFD_RELOC_MSP430X_PCR20_CALL
|
|
ENUMX
|
|
BFD_RELOC_MSP430X_ABS16
|
|
ENUMX
|
|
BFD_RELOC_MSP430_ABS_HI16
|
|
ENUMX
|
|
BFD_RELOC_MSP430_PREL31
|
|
ENUMX
|
|
BFD_RELOC_MSP430_SYM_DIFF
|
|
ENUMDOC
|
|
msp430 specific relocation codes
|
|
|
|
ENUM
|
|
BFD_RELOC_NIOS2_S16
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_U16
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_CALL26
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_IMM5
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_CACHE_OPX
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_IMM6
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_IMM8
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_HI16
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_LO16
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_HIADJ16
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_GPREL
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_UJMP
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_CJMP
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_CALLR
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_ALIGN
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_GOT16
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_CALL16
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_GOTOFF_LO
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_GOTOFF_HA
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_PCREL_LO
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_PCREL_HA
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_TLS_GD16
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_TLS_LDM16
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_TLS_LDO16
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_TLS_IE16
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_TLS_LE16
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_TLS_DTPMOD
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_TLS_DTPREL
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_TLS_TPREL
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_COPY
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_GLOB_DAT
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_JUMP_SLOT
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_RELATIVE
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_GOTOFF
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_CALL26_NOAT
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_GOT_LO
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_GOT_HA
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_CALL_LO
|
|
ENUMX
|
|
BFD_RELOC_NIOS2_CALL_HA
|
|
ENUMDOC
|
|
Relocations used by the Altera Nios II core.
|
|
|
|
ENUM
|
|
BFD_RELOC_IQ2000_OFFSET_16
|
|
ENUMX
|
|
BFD_RELOC_IQ2000_OFFSET_21
|
|
ENUMX
|
|
BFD_RELOC_IQ2000_UHI16
|
|
ENUMDOC
|
|
IQ2000 Relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_XTENSA_RTLD
|
|
ENUMDOC
|
|
Special Xtensa relocation used only by PLT entries in ELF shared
|
|
objects to indicate that the runtime linker should set the value
|
|
to one of its own internal functions or data structures.
|
|
ENUM
|
|
BFD_RELOC_XTENSA_GLOB_DAT
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_JMP_SLOT
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_RELATIVE
|
|
ENUMDOC
|
|
Xtensa relocations for ELF shared objects.
|
|
ENUM
|
|
BFD_RELOC_XTENSA_PLT
|
|
ENUMDOC
|
|
Xtensa relocation used in ELF object files for symbols that may require
|
|
PLT entries. Otherwise, this is just a generic 32-bit relocation.
|
|
ENUM
|
|
BFD_RELOC_XTENSA_DIFF8
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_DIFF16
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_DIFF32
|
|
ENUMDOC
|
|
Xtensa relocations to mark the difference of two local symbols.
|
|
These are only needed to support linker relaxation and can be ignored
|
|
when not relaxing. The field is set to the value of the difference
|
|
assuming no relaxation. The relocation encodes the position of the
|
|
first symbol so the linker can determine whether to adjust the field
|
|
value.
|
|
ENUM
|
|
BFD_RELOC_XTENSA_SLOT0_OP
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT1_OP
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT2_OP
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT3_OP
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT4_OP
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT5_OP
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT6_OP
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT7_OP
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT8_OP
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT9_OP
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT10_OP
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT11_OP
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT12_OP
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT13_OP
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT14_OP
|
|
ENUMDOC
|
|
Generic Xtensa relocations for instruction operands. Only the slot
|
|
number is encoded in the relocation. The relocation applies to the
|
|
last PC-relative immediate operand, or if there are no PC-relative
|
|
immediates, to the last immediate operand.
|
|
ENUM
|
|
BFD_RELOC_XTENSA_SLOT0_ALT
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT1_ALT
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT2_ALT
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT3_ALT
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT4_ALT
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT5_ALT
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT6_ALT
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT7_ALT
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT8_ALT
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT9_ALT
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT10_ALT
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT11_ALT
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT12_ALT
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT13_ALT
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_SLOT14_ALT
|
|
ENUMDOC
|
|
Alternate Xtensa relocations. Only the slot is encoded in the
|
|
relocation. The meaning of these relocations is opcode-specific.
|
|
ENUM
|
|
BFD_RELOC_XTENSA_OP0
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_OP1
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_OP2
|
|
ENUMDOC
|
|
Xtensa relocations for backward compatibility. These have all been
|
|
replaced by BFD_RELOC_XTENSA_SLOT0_OP.
|
|
ENUM
|
|
BFD_RELOC_XTENSA_ASM_EXPAND
|
|
ENUMDOC
|
|
Xtensa relocation to mark that the assembler expanded the
|
|
instructions from an original target. The expansion size is
|
|
encoded in the reloc size.
|
|
ENUM
|
|
BFD_RELOC_XTENSA_ASM_SIMPLIFY
|
|
ENUMDOC
|
|
Xtensa relocation to mark that the linker should simplify
|
|
assembler-expanded instructions. This is commonly used
|
|
internally by the linker after analysis of a
|
|
BFD_RELOC_XTENSA_ASM_EXPAND.
|
|
ENUM
|
|
BFD_RELOC_XTENSA_TLSDESC_FN
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_TLSDESC_ARG
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_TLS_DTPOFF
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_TLS_TPOFF
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_TLS_FUNC
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_TLS_ARG
|
|
ENUMX
|
|
BFD_RELOC_XTENSA_TLS_CALL
|
|
ENUMDOC
|
|
Xtensa TLS relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_Z80_DISP8
|
|
ENUMDOC
|
|
8 bit signed offset in (ix+d) or (iy+d).
|
|
|
|
ENUM
|
|
BFD_RELOC_Z8K_DISP7
|
|
ENUMDOC
|
|
DJNZ offset.
|
|
ENUM
|
|
BFD_RELOC_Z8K_CALLR
|
|
ENUMDOC
|
|
CALR offset.
|
|
ENUM
|
|
BFD_RELOC_Z8K_IMM4L
|
|
ENUMDOC
|
|
4 bit value.
|
|
|
|
ENUM
|
|
BFD_RELOC_LM32_CALL
|
|
ENUMX
|
|
BFD_RELOC_LM32_BRANCH
|
|
ENUMX
|
|
BFD_RELOC_LM32_16_GOT
|
|
ENUMX
|
|
BFD_RELOC_LM32_GOTOFF_HI16
|
|
ENUMX
|
|
BFD_RELOC_LM32_GOTOFF_LO16
|
|
ENUMX
|
|
BFD_RELOC_LM32_COPY
|
|
ENUMX
|
|
BFD_RELOC_LM32_GLOB_DAT
|
|
ENUMX
|
|
BFD_RELOC_LM32_JMP_SLOT
|
|
ENUMX
|
|
BFD_RELOC_LM32_RELATIVE
|
|
ENUMDOC
|
|
Lattice Mico32 relocations.
|
|
|
|
ENUM
|
|
BFD_RELOC_MACH_O_SECTDIFF
|
|
ENUMDOC
|
|
Difference between two section addreses. Must be followed by a
|
|
BFD_RELOC_MACH_O_PAIR.
|
|
ENUM
|
|
BFD_RELOC_MACH_O_LOCAL_SECTDIFF
|
|
ENUMDOC
|
|
Like BFD_RELOC_MACH_O_SECTDIFF but with a local symbol.
|
|
ENUM
|
|
BFD_RELOC_MACH_O_PAIR
|
|
ENUMDOC
|
|
Pair of relocation. Contains the first symbol.
|
|
|
|
ENUM
|
|
BFD_RELOC_MACH_O_X86_64_BRANCH32
|
|
ENUMX
|
|
BFD_RELOC_MACH_O_X86_64_BRANCH8
|
|
ENUMDOC
|
|
PCREL relocations. They are marked as branch to create PLT entry if
|
|
required.
|
|
ENUM
|
|
BFD_RELOC_MACH_O_X86_64_GOT
|
|
ENUMDOC
|
|
Used when referencing a GOT entry.
|
|
ENUM
|
|
BFD_RELOC_MACH_O_X86_64_GOT_LOAD
|
|
ENUMDOC
|
|
Used when loading a GOT entry with movq. It is specially marked so that
|
|
the linker could optimize the movq to a leaq if possible.
|
|
ENUM
|
|
BFD_RELOC_MACH_O_X86_64_SUBTRACTOR32
|
|
ENUMDOC
|
|
Symbol will be substracted. Must be followed by a BFD_RELOC_64.
|
|
ENUM
|
|
BFD_RELOC_MACH_O_X86_64_SUBTRACTOR64
|
|
ENUMDOC
|
|
Symbol will be substracted. Must be followed by a BFD_RELOC_64.
|
|
ENUM
|
|
BFD_RELOC_MACH_O_X86_64_PCREL32_1
|
|
ENUMDOC
|
|
Same as BFD_RELOC_32_PCREL but with an implicit -1 addend.
|
|
ENUM
|
|
BFD_RELOC_MACH_O_X86_64_PCREL32_2
|
|
ENUMDOC
|
|
Same as BFD_RELOC_32_PCREL but with an implicit -2 addend.
|
|
ENUM
|
|
BFD_RELOC_MACH_O_X86_64_PCREL32_4
|
|
ENUMDOC
|
|
Same as BFD_RELOC_32_PCREL but with an implicit -4 addend.
|
|
|
|
ENUM
|
|
BFD_RELOC_MICROBLAZE_32_LO
|
|
ENUMDOC
|
|
This is a 32 bit reloc for the microblaze that stores the
|
|
low 16 bits of a value
|
|
ENUM
|
|
BFD_RELOC_MICROBLAZE_32_LO_PCREL
|
|
ENUMDOC
|
|
This is a 32 bit pc-relative reloc for the microblaze that
|
|
stores the low 16 bits of a value
|
|
ENUM
|
|
BFD_RELOC_MICROBLAZE_32_ROSDA
|
|
ENUMDOC
|
|
This is a 32 bit reloc for the microblaze that stores a
|
|
value relative to the read-only small data area anchor
|
|
ENUM
|
|
BFD_RELOC_MICROBLAZE_32_RWSDA
|
|
ENUMDOC
|
|
This is a 32 bit reloc for the microblaze that stores a
|
|
value relative to the read-write small data area anchor
|
|
ENUM
|
|
BFD_RELOC_MICROBLAZE_32_SYM_OP_SYM
|
|
ENUMDOC
|
|
This is a 32 bit reloc for the microblaze to handle
|
|
expressions of the form "Symbol Op Symbol"
|
|
ENUM
|
|
BFD_RELOC_MICROBLAZE_64_NONE
|
|
ENUMDOC
|
|
This is a 64 bit reloc that stores the 32 bit pc relative
|
|
value in two words (with an imm instruction). No relocation is
|
|
done here - only used for relaxing
|
|
ENUM
|
|
BFD_RELOC_MICROBLAZE_64_GOTPC
|
|
ENUMDOC
|
|
This is a 64 bit reloc that stores the 32 bit pc relative
|
|
value in two words (with an imm instruction). The relocation is
|
|
PC-relative GOT offset
|
|
ENUM
|
|
BFD_RELOC_MICROBLAZE_64_GOT
|
|
ENUMDOC
|
|
This is a 64 bit reloc that stores the 32 bit pc relative
|
|
value in two words (with an imm instruction). The relocation is
|
|
GOT offset
|
|
ENUM
|
|
BFD_RELOC_MICROBLAZE_64_PLT
|
|
ENUMDOC
|
|
This is a 64 bit reloc that stores the 32 bit pc relative
|
|
value in two words (with an imm instruction). The relocation is
|
|
PC-relative offset into PLT
|
|
ENUM
|
|
BFD_RELOC_MICROBLAZE_64_GOTOFF
|
|
ENUMDOC
|
|
This is a 64 bit reloc that stores the 32 bit GOT relative
|
|
value in two words (with an imm instruction). The relocation is
|
|
relative offset from _GLOBAL_OFFSET_TABLE_
|
|
ENUM
|
|
BFD_RELOC_MICROBLAZE_32_GOTOFF
|
|
ENUMDOC
|
|
This is a 32 bit reloc that stores the 32 bit GOT relative
|
|
value in a word. The relocation is relative offset from
|
|
_GLOBAL_OFFSET_TABLE_
|
|
ENUM
|
|
BFD_RELOC_MICROBLAZE_COPY
|
|
ENUMDOC
|
|
This is used to tell the dynamic linker to copy the value out of
|
|
the dynamic object into the runtime process image.
|
|
ENUM
|
|
BFD_RELOC_MICROBLAZE_64_TLS
|
|
ENUMDOC
|
|
Unused Reloc
|
|
ENUM
|
|
BFD_RELOC_MICROBLAZE_64_TLSGD
|
|
ENUMDOC
|
|
This is a 64 bit reloc that stores the 32 bit GOT relative value
|
|
of the GOT TLS GD info entry in two words (with an imm instruction). The
|
|
relocation is GOT offset.
|
|
ENUM
|
|
BFD_RELOC_MICROBLAZE_64_TLSLD
|
|
ENUMDOC
|
|
This is a 64 bit reloc that stores the 32 bit GOT relative value
|
|
of the GOT TLS LD info entry in two words (with an imm instruction). The
|
|
relocation is GOT offset.
|
|
ENUM
|
|
BFD_RELOC_MICROBLAZE_32_TLSDTPMOD
|
|
ENUMDOC
|
|
This is a 32 bit reloc that stores the Module ID to GOT(n).
|
|
ENUM
|
|
BFD_RELOC_MICROBLAZE_32_TLSDTPREL
|
|
ENUMDOC
|
|
This is a 32 bit reloc that stores TLS offset to GOT(n+1).
|
|
ENUM
|
|
BFD_RELOC_MICROBLAZE_64_TLSDTPREL
|
|
ENUMDOC
|
|
This is a 32 bit reloc for storing TLS offset to two words (uses imm
|
|
instruction)
|
|
ENUM
|
|
BFD_RELOC_MICROBLAZE_64_TLSGOTTPREL
|
|
ENUMDOC
|
|
This is a 64 bit reloc that stores 32-bit thread pointer relative offset
|
|
to two words (uses imm instruction).
|
|
ENUM
|
|
BFD_RELOC_MICROBLAZE_64_TLSTPREL
|
|
ENUMDOC
|
|
This is a 64 bit reloc that stores 32-bit thread pointer relative offset
|
|
to two words (uses imm instruction).
|
|
|
|
ENUM
|
|
BFD_RELOC_AARCH64_RELOC_START
|
|
ENUMDOC
|
|
AArch64 pseudo relocation code to mark the start of the AArch64
|
|
relocation enumerators. N.B. the order of the enumerators is
|
|
important as several tables in the AArch64 bfd backend are indexed
|
|
by these enumerators; make sure they are all synced.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_NONE
|
|
ENUMDOC
|
|
AArch64 null relocation code.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_64
|
|
ENUMX
|
|
BFD_RELOC_AARCH64_32
|
|
ENUMX
|
|
BFD_RELOC_AARCH64_16
|
|
ENUMDOC
|
|
Basic absolute relocations of N bits. These are equivalent to
|
|
BFD_RELOC_N and they were added to assist the indexing of the howto
|
|
table.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_64_PCREL
|
|
ENUMX
|
|
BFD_RELOC_AARCH64_32_PCREL
|
|
ENUMX
|
|
BFD_RELOC_AARCH64_16_PCREL
|
|
ENUMDOC
|
|
PC-relative relocations. These are equivalent to BFD_RELOC_N_PCREL
|
|
and they were added to assist the indexing of the howto table.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_MOVW_G0
|
|
ENUMDOC
|
|
AArch64 MOV[NZK] instruction with most significant bits 0 to 15
|
|
of an unsigned address/value.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_MOVW_G0_NC
|
|
ENUMDOC
|
|
AArch64 MOV[NZK] instruction with less significant bits 0 to 15 of
|
|
an address/value. No overflow checking.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_MOVW_G1
|
|
ENUMDOC
|
|
AArch64 MOV[NZK] instruction with most significant bits 16 to 31
|
|
of an unsigned address/value.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_MOVW_G1_NC
|
|
ENUMDOC
|
|
AArch64 MOV[NZK] instruction with less significant bits 16 to 31
|
|
of an address/value. No overflow checking.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_MOVW_G2
|
|
ENUMDOC
|
|
AArch64 MOV[NZK] instruction with most significant bits 32 to 47
|
|
of an unsigned address/value.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_MOVW_G2_NC
|
|
ENUMDOC
|
|
AArch64 MOV[NZK] instruction with less significant bits 32 to 47
|
|
of an address/value. No overflow checking.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_MOVW_G3
|
|
ENUMDOC
|
|
AArch64 MOV[NZK] instruction with most signficant bits 48 to 64
|
|
of a signed or unsigned address/value.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_MOVW_G0_S
|
|
ENUMDOC
|
|
AArch64 MOV[NZ] instruction with most significant bits 0 to 15
|
|
of a signed value. Changes instruction to MOVZ or MOVN depending on the
|
|
value's sign.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_MOVW_G1_S
|
|
ENUMDOC
|
|
AArch64 MOV[NZ] instruction with most significant bits 16 to 31
|
|
of a signed value. Changes instruction to MOVZ or MOVN depending on the
|
|
value's sign.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_MOVW_G2_S
|
|
ENUMDOC
|
|
AArch64 MOV[NZ] instruction with most significant bits 32 to 47
|
|
of a signed value. Changes instruction to MOVZ or MOVN depending on the
|
|
value's sign.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_LD_LO19_PCREL
|
|
ENUMDOC
|
|
AArch64 Load Literal instruction, holding a 19 bit pc-relative word
|
|
offset. The lowest two bits must be zero and are not stored in the
|
|
instruction, giving a 21 bit signed byte offset.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_ADR_LO21_PCREL
|
|
ENUMDOC
|
|
AArch64 ADR instruction, holding a simple 21 bit pc-relative byte offset.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_ADR_HI21_PCREL
|
|
ENUMDOC
|
|
AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
|
|
offset, giving a 4KB aligned page base address.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_ADR_HI21_NC_PCREL
|
|
ENUMDOC
|
|
AArch64 ADRP instruction, with bits 12 to 32 of a pc-relative page
|
|
offset, giving a 4KB aligned page base address, but with no overflow
|
|
checking.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_ADD_LO12
|
|
ENUMDOC
|
|
AArch64 ADD immediate instruction, holding bits 0 to 11 of the address.
|
|
Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_LDST8_LO12
|
|
ENUMDOC
|
|
AArch64 8-bit load/store instruction, holding bits 0 to 11 of the
|
|
address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TSTBR14
|
|
ENUMDOC
|
|
AArch64 14 bit pc-relative test bit and branch.
|
|
The lowest two bits must be zero and are not stored in the instruction,
|
|
giving a 16 bit signed byte offset.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_BRANCH19
|
|
ENUMDOC
|
|
AArch64 19 bit pc-relative conditional branch and compare & branch.
|
|
The lowest two bits must be zero and are not stored in the instruction,
|
|
giving a 21 bit signed byte offset.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_JUMP26
|
|
ENUMDOC
|
|
AArch64 26 bit pc-relative unconditional branch.
|
|
The lowest two bits must be zero and are not stored in the instruction,
|
|
giving a 28 bit signed byte offset.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_CALL26
|
|
ENUMDOC
|
|
AArch64 26 bit pc-relative unconditional branch and link.
|
|
The lowest two bits must be zero and are not stored in the instruction,
|
|
giving a 28 bit signed byte offset.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_LDST16_LO12
|
|
ENUMDOC
|
|
AArch64 16-bit load/store instruction, holding bits 0 to 11 of the
|
|
address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_LDST32_LO12
|
|
ENUMDOC
|
|
AArch64 32-bit load/store instruction, holding bits 0 to 11 of the
|
|
address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_LDST64_LO12
|
|
ENUMDOC
|
|
AArch64 64-bit load/store instruction, holding bits 0 to 11 of the
|
|
address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_LDST128_LO12
|
|
ENUMDOC
|
|
AArch64 128-bit load/store instruction, holding bits 0 to 11 of the
|
|
address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_GOT_LD_PREL19
|
|
ENUMDOC
|
|
AArch64 Load Literal instruction, holding a 19 bit PC relative word
|
|
offset of the global offset table entry for a symbol. The lowest two
|
|
bits must be zero and are not stored in the instruction, giving a 21
|
|
bit signed byte offset. This relocation type requires signed overflow
|
|
checking.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_ADR_GOT_PAGE
|
|
ENUMDOC
|
|
Get to the page base of the global offset table entry for a symbol as
|
|
part of an ADRP instruction using a 21 bit PC relative value.Used in
|
|
conjunction with BFD_RELOC_AARCH64_LD64_GOT_LO12_NC.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_LD64_GOT_LO12_NC
|
|
ENUMDOC
|
|
Unsigned 12 bit byte offset for 64 bit load/store from the page of
|
|
the GOT entry for this symbol. Used in conjunction with
|
|
BFD_RELOC_AARCH64_ADR_GOTPAGE. Valid in LP64 ABI only.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_LD32_GOT_LO12_NC
|
|
ENUMDOC
|
|
Unsigned 12 bit byte offset for 32 bit load/store from the page of
|
|
the GOT entry for this symbol. Used in conjunction with
|
|
BFD_RELOC_AARCH64_ADR_GOTPAGE. Valid in ILP32 ABI only.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21
|
|
ENUMDOC
|
|
Get to the page base of the global offset table entry for a symbols
|
|
tls_index structure as part of an adrp instruction using a 21 bit PC
|
|
relative value. Used in conjunction with
|
|
BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSGD_ADD_LO12_NC
|
|
ENUMDOC
|
|
Unsigned 12 bit byte offset to global offset table entry for a symbols
|
|
tls_index structure. Used in conjunction with
|
|
BFD_RELOC_AARCH64_TLSGD_ADR_PAGE21.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G1
|
|
ENUMDOC
|
|
AArch64 TLS INITIAL EXEC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSIE_MOVW_GOTTPREL_G0_NC
|
|
ENUMDOC
|
|
AArch64 TLS INITIAL EXEC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSIE_ADR_GOTTPREL_PAGE21
|
|
ENUMDOC
|
|
AArch64 TLS INITIAL EXEC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSIE_LD64_GOTTPREL_LO12_NC
|
|
ENUMDOC
|
|
AArch64 TLS INITIAL EXEC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSIE_LD32_GOTTPREL_LO12_NC
|
|
ENUMDOC
|
|
AArch64 TLS INITIAL EXEC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19
|
|
ENUMDOC
|
|
AArch64 TLS INITIAL EXEC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G2
|
|
ENUMDOC
|
|
AArch64 TLS LOCAL EXEC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1
|
|
ENUMDOC
|
|
AArch64 TLS LOCAL EXEC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G1_NC
|
|
ENUMDOC
|
|
AArch64 TLS LOCAL EXEC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0
|
|
ENUMDOC
|
|
AArch64 TLS LOCAL EXEC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSLE_MOVW_TPREL_G0_NC
|
|
ENUMDOC
|
|
AArch64 TLS LOCAL EXEC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_HI12
|
|
ENUMDOC
|
|
AArch64 TLS LOCAL EXEC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12
|
|
ENUMDOC
|
|
AArch64 TLS LOCAL EXEC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSLE_ADD_TPREL_LO12_NC
|
|
ENUMDOC
|
|
AArch64 TLS LOCAL EXEC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSDESC_LD_PREL19
|
|
ENUMDOC
|
|
AArch64 TLS DESC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21
|
|
ENUMDOC
|
|
AArch64 TLS DESC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21
|
|
ENUMDOC
|
|
AArch64 TLS DESC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC
|
|
ENUMDOC
|
|
AArch64 TLS DESC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSDESC_LD32_LO12_NC
|
|
ENUMDOC
|
|
AArch64 TLS DESC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC
|
|
ENUMDOC
|
|
AArch64 TLS DESC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSDESC_OFF_G1
|
|
ENUMDOC
|
|
AArch64 TLS DESC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC
|
|
ENUMDOC
|
|
AArch64 TLS DESC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSDESC_LDR
|
|
ENUMDOC
|
|
AArch64 TLS DESC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSDESC_ADD
|
|
ENUMDOC
|
|
AArch64 TLS DESC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSDESC_CALL
|
|
ENUMDOC
|
|
AArch64 TLS DESC relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_COPY
|
|
ENUMDOC
|
|
AArch64 TLS relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_GLOB_DAT
|
|
ENUMDOC
|
|
AArch64 TLS relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_JUMP_SLOT
|
|
ENUMDOC
|
|
AArch64 TLS relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_RELATIVE
|
|
ENUMDOC
|
|
AArch64 TLS relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLS_DTPMOD
|
|
ENUMDOC
|
|
AArch64 TLS relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLS_DTPREL
|
|
ENUMDOC
|
|
AArch64 TLS relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLS_TPREL
|
|
ENUMDOC
|
|
AArch64 TLS relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSDESC
|
|
ENUMDOC
|
|
AArch64 TLS relocation.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_IRELATIVE
|
|
ENUMDOC
|
|
AArch64 support for STT_GNU_IFUNC.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_RELOC_END
|
|
ENUMDOC
|
|
AArch64 pseudo relocation code to mark the end of the AArch64
|
|
relocation enumerators that have direct mapping to ELF reloc codes.
|
|
There are a few more enumerators after this one; those are mainly
|
|
used by the AArch64 assembler for the internal fixup or to select
|
|
one of the above enumerators.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_GAS_INTERNAL_FIXUP
|
|
ENUMDOC
|
|
AArch64 pseudo relocation code to be used internally by the AArch64
|
|
assembler and not (currently) written to any object files.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_LDST_LO12
|
|
ENUMDOC
|
|
AArch64 unspecified load/store instruction, holding bits 0 to 11 of the
|
|
address. Used in conjunction with BFD_RELOC_AARCH64_ADR_HI21_PCREL.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_LD_GOT_LO12_NC
|
|
ENUMDOC
|
|
AArch64 pseudo relocation code to be used internally by the AArch64
|
|
assembler and not (currently) written to any object files.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_LO12_NC
|
|
ENUMDOC
|
|
AArch64 pseudo relocation code to be used internally by the AArch64
|
|
assembler and not (currently) written to any object files.
|
|
ENUM
|
|
BFD_RELOC_AARCH64_TLSDESC_LD_LO12_NC
|
|
ENUMDOC
|
|
AArch64 pseudo relocation code to be used internally by the AArch64
|
|
assembler and not (currently) written to any object files.
|
|
|
|
ENUM
|
|
BFD_RELOC_TILEPRO_COPY
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_GLOB_DAT
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_JMP_SLOT
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_RELATIVE
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_BROFF_X1
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_JOFFLONG_X1
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_JOFFLONG_X1_PLT
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM8_X0
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM8_Y0
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM8_X1
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM8_Y1
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_DEST_IMM8_X1
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_MT_IMM15_X1
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_MF_IMM15_X1
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_LO
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_LO
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_HI
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_HI
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_HA
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_HA
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_LO_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_LO_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_HI_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_HI_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_HA_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_HA_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_GOT
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_GOT
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_GOT_LO
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_GOT_LO
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_GOT_HI
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_GOT_HI
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_GOT_HA
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_GOT_HA
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_MMSTART_X0
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_MMEND_X0
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_MMSTART_X1
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_MMEND_X1
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_SHAMT_X0
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_SHAMT_X1
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_SHAMT_Y0
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_SHAMT_Y1
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_TLS_GD_CALL
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM8_X0_TLS_GD_ADD
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM8_X1_TLS_GD_ADD
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM8_Y0_TLS_GD_ADD
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM8_Y1_TLS_GD_ADD
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_TLS_IE_LOAD
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_LO
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_LO
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HI
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HI
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_TLS_GD_HA
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_TLS_GD_HA
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_LO
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_LO
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HI
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HI
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_TLS_IE_HA
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_TLS_IE_HA
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_TLS_DTPMOD32
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_TLS_DTPOFF32
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_TLS_TPOFF32
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_LO
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_LO
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HI
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HI
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X0_TLS_LE_HA
|
|
ENUMX
|
|
BFD_RELOC_TILEPRO_IMM16_X1_TLS_LE_HA
|
|
ENUMDOC
|
|
Tilera TILEPro Relocations.
|
|
ENUM
|
|
BFD_RELOC_TILEGX_HW0
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_HW1
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_HW2
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_HW3
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_HW0_LAST
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_HW1_LAST
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_HW2_LAST
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_COPY
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_GLOB_DAT
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_JMP_SLOT
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_RELATIVE
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_BROFF_X1
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_JUMPOFF_X1
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_JUMPOFF_X1_PLT
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM8_X0
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM8_Y0
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM8_X1
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM8_Y1
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_DEST_IMM8_X1
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_MT_IMM14_X1
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_MF_IMM14_X1
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_MMSTART_X0
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_MMEND_X0
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_SHAMT_X0
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_SHAMT_X1
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_SHAMT_Y0
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_SHAMT_Y1
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW0
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW0
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW1
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW1
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW2
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW2
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW3
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW3
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW0_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW0_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW1_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW1_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW2_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW2_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW3_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW3_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW0_GOT
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW0_GOT
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW0_PLT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW0_PLT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW1_PLT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW1_PLT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW2_PLT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW2_PLT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_GOT
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_GOT
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_GOT
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_GOT
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW3_PLT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW3_PLT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_GD
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_GD
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_LE
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_LE
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_LE
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_LE
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_LE
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_LE
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_GD
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_GD
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_GD
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_GD
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW0_TLS_IE
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW0_TLS_IE
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_PLT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_PLT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_PLT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_PLT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW2_LAST_PLT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW2_LAST_PLT_PCREL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW0_LAST_TLS_IE
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW0_LAST_TLS_IE
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X0_HW1_LAST_TLS_IE
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM16_X1_HW1_LAST_TLS_IE
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_TLS_DTPMOD64
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_TLS_DTPOFF64
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_TLS_TPOFF64
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_TLS_DTPMOD32
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_TLS_DTPOFF32
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_TLS_TPOFF32
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_TLS_GD_CALL
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM8_X0_TLS_GD_ADD
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM8_X1_TLS_GD_ADD
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM8_Y0_TLS_GD_ADD
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM8_Y1_TLS_GD_ADD
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_TLS_IE_LOAD
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM8_X0_TLS_ADD
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM8_X1_TLS_ADD
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM8_Y0_TLS_ADD
|
|
ENUMX
|
|
BFD_RELOC_TILEGX_IMM8_Y1_TLS_ADD
|
|
ENUMDOC
|
|
Tilera TILE-Gx Relocations.
|
|
ENUM
|
|
BFD_RELOC_EPIPHANY_SIMM8
|
|
ENUMDOC
|
|
Adapteva EPIPHANY - 8 bit signed pc-relative displacement
|
|
ENUM
|
|
BFD_RELOC_EPIPHANY_SIMM24
|
|
ENUMDOC
|
|
Adapteva EPIPHANY - 24 bit signed pc-relative displacement
|
|
ENUM
|
|
BFD_RELOC_EPIPHANY_HIGH
|
|
ENUMDOC
|
|
Adapteva EPIPHANY - 16 most-significant bits of absolute address
|
|
ENUM
|
|
BFD_RELOC_EPIPHANY_LOW
|
|
ENUMDOC
|
|
Adapteva EPIPHANY - 16 least-significant bits of absolute address
|
|
ENUM
|
|
BFD_RELOC_EPIPHANY_SIMM11
|
|
ENUMDOC
|
|
Adapteva EPIPHANY - 11 bit signed number - add/sub immediate
|
|
ENUM
|
|
BFD_RELOC_EPIPHANY_IMM11
|
|
ENUMDOC
|
|
Adapteva EPIPHANY - 11 bit sign-magnitude number (ld/st displacement)
|
|
ENUM
|
|
BFD_RELOC_EPIPHANY_IMM8
|
|
ENUMDOC
|
|
Adapteva EPIPHANY - 8 bit immediate for 16 bit mov instruction.
|
|
|
|
|
|
ENDSENUM
|
|
BFD_RELOC_UNUSED
|
|
CODE_FRAGMENT
|
|
.
|
|
.typedef enum bfd_reloc_code_real bfd_reloc_code_real_type;
|
|
*/
|
|
|
|
/*
|
|
FUNCTION
|
|
bfd_reloc_type_lookup
|
|
bfd_reloc_name_lookup
|
|
|
|
SYNOPSIS
|
|
reloc_howto_type *bfd_reloc_type_lookup
|
|
(bfd *abfd, bfd_reloc_code_real_type code);
|
|
reloc_howto_type *bfd_reloc_name_lookup
|
|
(bfd *abfd, const char *reloc_name);
|
|
|
|
DESCRIPTION
|
|
Return a pointer to a howto structure which, when
|
|
invoked, will perform the relocation @var{code} on data from the
|
|
architecture noted.
|
|
|
|
*/
|
|
|
|
reloc_howto_type *
|
|
bfd_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
|
|
{
|
|
return BFD_SEND (abfd, reloc_type_lookup, (abfd, code));
|
|
}
|
|
|
|
reloc_howto_type *
|
|
bfd_reloc_name_lookup (bfd *abfd, const char *reloc_name)
|
|
{
|
|
return BFD_SEND (abfd, reloc_name_lookup, (abfd, reloc_name));
|
|
}
|
|
|
|
static reloc_howto_type bfd_howto_32 =
|
|
HOWTO (0, 00, 2, 32, FALSE, 0, complain_overflow_dont, 0, "VRT32", FALSE, 0xffffffff, 0xffffffff, TRUE);
|
|
|
|
/*
|
|
INTERNAL_FUNCTION
|
|
bfd_default_reloc_type_lookup
|
|
|
|
SYNOPSIS
|
|
reloc_howto_type *bfd_default_reloc_type_lookup
|
|
(bfd *abfd, bfd_reloc_code_real_type code);
|
|
|
|
DESCRIPTION
|
|
Provides a default relocation lookup routine for any architecture.
|
|
|
|
*/
|
|
|
|
reloc_howto_type *
|
|
bfd_default_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code)
|
|
{
|
|
switch (code)
|
|
{
|
|
case BFD_RELOC_CTOR:
|
|
/* The type of reloc used in a ctor, which will be as wide as the
|
|
address - so either a 64, 32, or 16 bitter. */
|
|
switch (bfd_arch_bits_per_address (abfd))
|
|
{
|
|
case 64:
|
|
BFD_FAIL ();
|
|
case 32:
|
|
return &bfd_howto_32;
|
|
case 16:
|
|
BFD_FAIL ();
|
|
default:
|
|
BFD_FAIL ();
|
|
}
|
|
default:
|
|
BFD_FAIL ();
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
FUNCTION
|
|
bfd_get_reloc_code_name
|
|
|
|
SYNOPSIS
|
|
const char *bfd_get_reloc_code_name (bfd_reloc_code_real_type code);
|
|
|
|
DESCRIPTION
|
|
Provides a printable name for the supplied relocation code.
|
|
Useful mainly for printing error messages.
|
|
*/
|
|
|
|
const char *
|
|
bfd_get_reloc_code_name (bfd_reloc_code_real_type code)
|
|
{
|
|
if (code > BFD_RELOC_UNUSED)
|
|
return 0;
|
|
return bfd_reloc_code_real_names[code];
|
|
}
|
|
|
|
/*
|
|
INTERNAL_FUNCTION
|
|
bfd_generic_relax_section
|
|
|
|
SYNOPSIS
|
|
bfd_boolean bfd_generic_relax_section
|
|
(bfd *abfd,
|
|
asection *section,
|
|
struct bfd_link_info *,
|
|
bfd_boolean *);
|
|
|
|
DESCRIPTION
|
|
Provides default handling for relaxing for back ends which
|
|
don't do relaxing.
|
|
*/
|
|
|
|
bfd_boolean
|
|
bfd_generic_relax_section (bfd *abfd ATTRIBUTE_UNUSED,
|
|
asection *section ATTRIBUTE_UNUSED,
|
|
struct bfd_link_info *link_info ATTRIBUTE_UNUSED,
|
|
bfd_boolean *again)
|
|
{
|
|
if (link_info->relocatable)
|
|
(*link_info->callbacks->einfo)
|
|
(_("%P%F: --relax and -r may not be used together\n"));
|
|
|
|
*again = FALSE;
|
|
return TRUE;
|
|
}
|
|
|
|
/*
|
|
INTERNAL_FUNCTION
|
|
bfd_generic_gc_sections
|
|
|
|
SYNOPSIS
|
|
bfd_boolean bfd_generic_gc_sections
|
|
(bfd *, struct bfd_link_info *);
|
|
|
|
DESCRIPTION
|
|
Provides default handling for relaxing for back ends which
|
|
don't do section gc -- i.e., does nothing.
|
|
*/
|
|
|
|
bfd_boolean
|
|
bfd_generic_gc_sections (bfd *abfd ATTRIBUTE_UNUSED,
|
|
struct bfd_link_info *info ATTRIBUTE_UNUSED)
|
|
{
|
|
return TRUE;
|
|
}
|
|
|
|
/*
|
|
INTERNAL_FUNCTION
|
|
bfd_generic_lookup_section_flags
|
|
|
|
SYNOPSIS
|
|
bfd_boolean bfd_generic_lookup_section_flags
|
|
(struct bfd_link_info *, struct flag_info *, asection *);
|
|
|
|
DESCRIPTION
|
|
Provides default handling for section flags lookup
|
|
-- i.e., does nothing.
|
|
Returns FALSE if the section should be omitted, otherwise TRUE.
|
|
*/
|
|
|
|
bfd_boolean
|
|
bfd_generic_lookup_section_flags (struct bfd_link_info *info ATTRIBUTE_UNUSED,
|
|
struct flag_info *flaginfo,
|
|
asection *section ATTRIBUTE_UNUSED)
|
|
{
|
|
if (flaginfo != NULL)
|
|
{
|
|
(*_bfd_error_handler) (_("INPUT_SECTION_FLAGS are not supported.\n"));
|
|
return FALSE;
|
|
}
|
|
return TRUE;
|
|
}
|
|
|
|
/*
|
|
INTERNAL_FUNCTION
|
|
bfd_generic_merge_sections
|
|
|
|
SYNOPSIS
|
|
bfd_boolean bfd_generic_merge_sections
|
|
(bfd *, struct bfd_link_info *);
|
|
|
|
DESCRIPTION
|
|
Provides default handling for SEC_MERGE section merging for back ends
|
|
which don't have SEC_MERGE support -- i.e., does nothing.
|
|
*/
|
|
|
|
bfd_boolean
|
|
bfd_generic_merge_sections (bfd *abfd ATTRIBUTE_UNUSED,
|
|
struct bfd_link_info *link_info ATTRIBUTE_UNUSED)
|
|
{
|
|
return TRUE;
|
|
}
|
|
|
|
/*
|
|
INTERNAL_FUNCTION
|
|
bfd_generic_get_relocated_section_contents
|
|
|
|
SYNOPSIS
|
|
bfd_byte *bfd_generic_get_relocated_section_contents
|
|
(bfd *abfd,
|
|
struct bfd_link_info *link_info,
|
|
struct bfd_link_order *link_order,
|
|
bfd_byte *data,
|
|
bfd_boolean relocatable,
|
|
asymbol **symbols);
|
|
|
|
DESCRIPTION
|
|
Provides default handling of relocation effort for back ends
|
|
which can't be bothered to do it efficiently.
|
|
|
|
*/
|
|
|
|
bfd_byte *
|
|
bfd_generic_get_relocated_section_contents (bfd *abfd,
|
|
struct bfd_link_info *link_info,
|
|
struct bfd_link_order *link_order,
|
|
bfd_byte *data,
|
|
bfd_boolean relocatable,
|
|
asymbol **symbols)
|
|
{
|
|
bfd *input_bfd = link_order->u.indirect.section->owner;
|
|
asection *input_section = link_order->u.indirect.section;
|
|
long reloc_size;
|
|
arelent **reloc_vector;
|
|
long reloc_count;
|
|
|
|
reloc_size = bfd_get_reloc_upper_bound (input_bfd, input_section);
|
|
if (reloc_size < 0)
|
|
return NULL;
|
|
|
|
/* Read in the section. */
|
|
if (!bfd_get_full_section_contents (input_bfd, input_section, &data))
|
|
return NULL;
|
|
|
|
if (reloc_size == 0)
|
|
return data;
|
|
|
|
reloc_vector = (arelent **) bfd_malloc (reloc_size);
|
|
if (reloc_vector == NULL)
|
|
return NULL;
|
|
|
|
reloc_count = bfd_canonicalize_reloc (input_bfd,
|
|
input_section,
|
|
reloc_vector,
|
|
symbols);
|
|
if (reloc_count < 0)
|
|
goto error_return;
|
|
|
|
if (reloc_count > 0)
|
|
{
|
|
arelent **parent;
|
|
for (parent = reloc_vector; *parent != NULL; parent++)
|
|
{
|
|
char *error_message = NULL;
|
|
asymbol *symbol;
|
|
bfd_reloc_status_type r;
|
|
|
|
symbol = *(*parent)->sym_ptr_ptr;
|
|
if (symbol->section && discarded_section (symbol->section))
|
|
{
|
|
bfd_byte *p;
|
|
static reloc_howto_type none_howto
|
|
= HOWTO (0, 0, 0, 0, FALSE, 0, complain_overflow_dont, NULL,
|
|
"unused", FALSE, 0, 0, FALSE);
|
|
|
|
p = data + (*parent)->address * bfd_octets_per_byte (input_bfd);
|
|
_bfd_clear_contents ((*parent)->howto, input_bfd, input_section,
|
|
p);
|
|
(*parent)->sym_ptr_ptr = bfd_abs_section_ptr->symbol_ptr_ptr;
|
|
(*parent)->addend = 0;
|
|
(*parent)->howto = &none_howto;
|
|
r = bfd_reloc_ok;
|
|
}
|
|
else
|
|
r = bfd_perform_relocation (input_bfd,
|
|
*parent,
|
|
data,
|
|
input_section,
|
|
relocatable ? abfd : NULL,
|
|
&error_message);
|
|
|
|
if (relocatable)
|
|
{
|
|
asection *os = input_section->output_section;
|
|
|
|
/* A partial link, so keep the relocs. */
|
|
os->orelocation[os->reloc_count] = *parent;
|
|
os->reloc_count++;
|
|
}
|
|
|
|
if (r != bfd_reloc_ok)
|
|
{
|
|
switch (r)
|
|
{
|
|
case bfd_reloc_undefined:
|
|
if (!((*link_info->callbacks->undefined_symbol)
|
|
(link_info, bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
|
|
input_bfd, input_section, (*parent)->address,
|
|
TRUE)))
|
|
goto error_return;
|
|
break;
|
|
case bfd_reloc_dangerous:
|
|
BFD_ASSERT (error_message != NULL);
|
|
if (!((*link_info->callbacks->reloc_dangerous)
|
|
(link_info, error_message, input_bfd, input_section,
|
|
(*parent)->address)))
|
|
goto error_return;
|
|
break;
|
|
case bfd_reloc_overflow:
|
|
if (!((*link_info->callbacks->reloc_overflow)
|
|
(link_info, NULL,
|
|
bfd_asymbol_name (*(*parent)->sym_ptr_ptr),
|
|
(*parent)->howto->name, (*parent)->addend,
|
|
input_bfd, input_section, (*parent)->address)))
|
|
goto error_return;
|
|
break;
|
|
case bfd_reloc_outofrange:
|
|
/* PR ld/13730:
|
|
This error can result when processing some partially
|
|
complete binaries. Do not abort, but issue an error
|
|
message instead. */
|
|
link_info->callbacks->einfo
|
|
(_("%X%P: %B(%A): relocation \"%R\" goes out of range\n"),
|
|
abfd, input_section, * parent);
|
|
goto error_return;
|
|
|
|
default:
|
|
abort ();
|
|
break;
|
|
}
|
|
|
|
}
|
|
}
|
|
}
|
|
|
|
free (reloc_vector);
|
|
return data;
|
|
|
|
error_return:
|
|
free (reloc_vector);
|
|
return NULL;
|
|
}
|