binutils-gdb/gdb/Makefile.in
Simon Marchi 470dd0a647 Makefile: Replace explicit subdir rules with pattern rules
When adding a .c file in subdirectory (e.g. mi/), the current practice
is to add an explicit rule, such as:

  mi-cmd-break.o: $(srcdir)/mi/mi-cmd-break.c
          $(COMPILE) $(srcdir)/mi/mi-cmd-break.c
          $(POSTCOMPILE)

I find it a bit verbose and cumbersome.  Since we now require GNU make,
we can change those rules with pattern rules, one for each subdirectory.
For example, the following rule works for all files under mi:

  %.o: $(srcdir)/mi/%.c
          $(COMPILE) $<
          $(POSTCOMPILE)

Those pattern rules assume that the source and target files have the
same stem (foo.c and foo.o).  In one case, common-agent.o is generated
from common/agent.c, to avoid a conflict with the agent.o in gdb/.  In
this case, I kept the explicit rule, which takes precedence over the
pattern rule.  We could also rename common/agent.c to
common/common-agent.c to get rid of the special case and still avoid the
clash, as it is done with common/common-regcache.c, for example.

This strategy was the least intrusive I found, as it only requires
changing the rules, not the target names.

I also considered two other solutions, which I did not like because I
would have had to change target names a bit everywhere.

  - Replicate the source directory structure in the build directory,
    which would generate common/agent.o from common/agent.c.  However,
    something was not right with the dependency tracking (the .deps
    directory).  It's probably not hard to fix, but I did not
    investigate further.
  - Name the object files after the directory they are in, so that
    common/agent.c would generate common_agent.c.

GDBserver can benefit from the same treatment, but I'll do it in another
patch.

Built-tested with --enable-targets=all.

New in v2:

  - Regroup pattern rules for .c -> .o compilation in a single place.
  - Add comment about common-agent.o.

gdb/ChangeLog:

	(PYTHON_CFLAGS): Move up.
	(%.o: $(srcdir)/arch/%.c): New rule.
	(%.o: $(srcdir)/cli/%.c): New rule.
	(%.o: $(srcdir)/common/%.c): New rule.
	(%.o: $(srcdir)/compile/%.c): New rule.
	(%.o: $(srcdir)/gdbtk/generic/%.c): New rule.
	(%.o: $(srcdir)/guile/%.c): New rule.
	(%.o: $(srcdir)/mi/%.c): New rule.
	(%.o: $(srcdir)/nat/%.c): New rule.
	(%.o: $(srcdir)/python/%.c): New rule.
	(%.o: $(srcdir)/target/%.c): New rule.
	(%.o: $(srcdir)/tui/%.c): New rule.
	(cli-cmds.o): Remove.
	(cli-decode.o): Likewise.
	(cli-dump.o): Likewise.
	(cli-interp.o): Likewise.
	(cli-logging.o): Likewise.
	(cli-script.o): Likewise.
	(cli-setshow.o): Likewise.
	(cli-utils.o): Likewise.
	(compile.o): Likewise.
	(compile-c-types.o): Likewise.
	(compile-c-symbols.o): Likewise.
	(compile-object-load.o): Likewise.
	(compile-object-run.o): Likewise.
	(compile-loc2c.o): Likewise.
	(compile-c-support.o): Likewise.
	(gdbtk.o): Likewise.
	(gdbtk-bp.o): Likewise.
	(gdbtk-cmds.o): Likewise.
	(gdbtk-hooks.o): Likewise.
	(gdbtk-interp.o): Likewise.
	(gdbtk-main.o): Likewise.
	(gdbtk-register.o): Likewise.
	(gdbtk-stack.o): Likewise.
	(gdbtk-varobj.o): Likewise.
	(gdbtk-wrapper.o): Likewise.
	(mi-cmd-break.o): Likewise.
	(mi-cmd-catch.o): Likewise.
	(mi-cmd-disas.o): Likewise.
	(mi-cmd-env.o): Likewise.
	(mi-cmd-file.o): Likewise.
	(mi-cmd-info.o): Likewise.
	(mi-cmds.o): Likewise.
	(mi-cmd-stack.o): Likewise.
	(mi-cmd-target.o): Likewise.
	(mi-cmd-var.o): Likewise.
	(mi-console.o): Likewise.
	(mi-getopt.o): Likewise.
	(mi-interp.o): Likewise.
	(mi-main.o): Likewise.
	(mi-out.o): Likewise.
	(mi-parse.o): Likewise.
	(mi-symbol-cmds.o): Likewise.
	(mi-common.o): Likewise.
	(signals.o): Likewise.
	(common-utils.o): Likewise.
	(gdb_vecs.o): Likewise.
	(xml-utils.o): Likewise.
	(ptid.o): Likewise.
	(buffer.o): Likewise.
	(filestuff.o): Likewise.
	(format.o): Likewise.
	(vec.o): Likewise.
	(print-utils.o): Likewise.
	(rsp-low.o): Likewise.
	(errors.o): Likewise.
	(common-debug.o): Likewise.
	(cleanups.o): Likewise.
	(common-exceptions.o
	(posix-strerror.o): Likewise.
	(mingw-strerror.o): Likewise.
	(btrace-common.o): Likewise.
	(fileio.o): Likewise.
	(common-regcache.o): Likewise.
	(signals-state-save-restore.o): Likewise.
	(new-op.o): Likewise.
	(waitstatus.o): Likewise.
	(arm.o): Likewise.
	(arm-linux.o): Likewise.
	(arm-get-next-pcs.o): Likewise.
	(x86-dregs.o): Likewise.
	(linux-btrace.o): Likewise.
	(linux-osdata.o): Likewise.
	(linux-procfs.o): Likewise.
	(linux-ptrace.o): Likewise.
	(linux-waitpid.o): Likewise.
	(mips-linux-watch.o): Likewise.
	(ppc-linux.o): Likewise.
	(linux-personality.o): Likewise.
	(x86-linux.o): Likewise.
	(x86-linux-dregs.o): Likewise.
	(amd64-linux-siginfo.o): Likewise.
	(linux-namespaces.o): Likewise.
	(aarch64-linux-hw-point.o): Likewise.
	(aarch64-linux.o): Likewise.
	(aarch64-insn.o): Likewise.
	(tui.o): Likewise.
	(tui-command.o): Likewise.
	(tui-data.o): Likewise.
	(tui-disasm.o): Likewise.
	(tui-file.o): Likewise.
	(tui-hooks.o): Likewise.
	(tui-interp.o): Likewise.
	(tui-io.o): Likewise.
	(tui-layout.o): Likewise.
	(tui-out.o): Likewise.
	(tui-regs.o): Likewise.
	(tui-source.o): Likewise.
	(tui-stack.o): Likewise.
	(tui-win.o): Likewise.
	(tui-windata.o): Likewise.
	(tui-wingeneral.o): Likewise.
	(tui-winsource.o): Likewise.
	(guile.o): Likewise.
	(scm-arch.o): Likewise.
	(scm-auto-load.o): Likewise.
	(scm-block.o): Likewise.
	(scm-breakpoint.o): Likewise.
	(scm-cmd.o): Likewise.
	(scm-disasm.o): Likewise.
	(scm-exception.o): Likewise.
	(scm-frame.o): Likewise.
	(scm-gsmob.o): Likewise.
	(scm-iterator.o): Likewise.
	(scm-lazy-string.o): Likewise.
	(scm-math.o): Likewise.
	(scm-objfile.o): Likewise.
	(scm-param.o): Likewise.
	(scm-ports.o): Likewise.
	(scm-pretty-print.o): Likewise.
	(scm-progspace.o): Likewise.
	(scm-safe-call.o): Likewise.
	(scm-string.o): Likewise.
	(scm-symbol.o): Likewise.
	(scm-symtab.o): Likewise.
	(scm-type.o): Likewise.
	(scm-utils.o): Likewise.
	(scm-value.o): Likewise.
	(python.o): Likewise.
	(py-arch.o): Likewise.
	(py-auto-load.o): Likewise.
	(py-block.o): Likewise.
	(py-bpevent.o): Likewise.
	(py-breakpoint.o): Likewise.
	(py-cmd.o): Likewise.
	(py-continueevent.o): Likewise.
	(py-xmethods.o): Likewise.
	(py-event.o): Likewise.
	(py-evtregistry.o): Likewise.
	(py-evts.o): Likewise.
	(py-exitedevent.o): Likewise.
	(py-finishbreakpoint.o): Likewise.
	(py-frame.o): Likewise.
	(py-framefilter.o): Likewise.
	(py-function.o): Likewise.
	(py-gdb-readline.o): Likewise.
	(py-inferior.o): Likewise.
	(py-infevents.o): Likewise.
	(py-infthread.o): Likewise.
	(py-lazy-string.o): Likewise.
	(py-linetable.o): Likewise.
	(py-newobjfileevent.o): Likewise.
	(py-objfile.o): Likewise.
	(py-param.o): Likewise.
	(py-prettyprint.o): Likewise.
	(py-progspace.o): Likewise.
	(py-signalevent.o): Likewise.
	(py-stopevent.o): Likewise.
	(py-symbol.o): Likewise.
	(py-symtab.o): Likewise.
	(py-threadevent.o): Likewise.
	(py-type.o): Likewise.
	(py-unwind.o): Likewise.
	(py-utils.o): Likewise.
	(py-value.o): Likewise.
	(py-varobj.o): Likewise.
2016-11-17 12:02:32 -05:00

2095 lines
68 KiB
Makefile

# Copyright (C) 1989-2016 Free Software Foundation, Inc.
# This file is part of GDB.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
prefix = @prefix@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
target_alias = @target_alias@
program_transform_name = @program_transform_name@
bindir = @bindir@
libdir = @libdir@
tooldir = $(libdir)/$(target_alias)
datadir = @datadir@
localedir = @localedir@
mandir = @mandir@
man1dir = $(mandir)/man1
man2dir = $(mandir)/man2
man3dir = $(mandir)/man3
man4dir = $(mandir)/man4
man5dir = $(mandir)/man5
man6dir = $(mandir)/man6
man7dir = $(mandir)/man7
man8dir = $(mandir)/man8
man9dir = $(mandir)/man9
infodir = @infodir@
datarootdir = @datarootdir@
docdir = @docdir@
htmldir = @htmldir@
pdfdir = @pdfdir@
includedir = @includedir@
install_sh = @install_sh@
# This can be referenced by `LIBINTL' as computed by
# ZW_GNU_GETTEXT_SISTER_DIR.
top_builddir = .
SHELL = @SHELL@
EXEEXT = @EXEEXT@
AWK = @AWK@
LN_S = @LN_S@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
DESTDIR =
AR = @AR@
AR_FLAGS = qv
RANLIB = @RANLIB@
DLLTOOL = @DLLTOOL@
WINDRES = @WINDRES@
MIG = @MIG@
STRIP = @STRIP@
XGETTEXT = @XGETTEXT@
GMSGFMT = @GMSGFMT@
MSGMERGE = msgmerge
PACKAGE = @PACKAGE@
CATALOGS = @CATALOGS@
# If you are compiling with GCC, make sure that either 1) You have the
# fixed include files where GCC can reach them, or 2) You use the
# -traditional flag. Otherwise the ioctl calls in inflow.c
# will be incorrectly compiled. The "fixincludes" script in the gcc
# distribution will fix your include files up.
CC=@CC@
CXX=@CXX@
CXX_DIALECT= @CXX_DIALECT@
# Dependency tracking information.
DEPMODE = @CCDEPMODE@
DEPDIR = @DEPDIR@
depcomp = $(SHELL) $(srcdir)/../depcomp
# Note that these are overridden by GNU make-specific code below if
# GNU make is used. The overrides implement dependency tracking.
COMPILE.pre = $(CXX) $(CXX_DIALECT)
COMPILE.post = -c -o $@
COMPILE = $(COMPILE.pre) $(INTERNAL_CFLAGS) $(COMPILE.post)
POSTCOMPILE = @true
# Directory containing source files.
srcdir = @srcdir@
VPATH = @srcdir@
top_srcdir = @top_srcdir@
YACC=@YACC@
# This is used to rebuild ada-lex.c from ada-lex.l. If the program is
# not defined, but ada-lex.c is present, compilation will continue,
# possibly with a warning.
FLEX = flex
YLWRAP = $(srcdir)/../ylwrap
# where to find makeinfo, preferably one designed for texinfo-2
MAKEINFO = @MAKEINFO@
MAKEINFOFLAGS = @MAKEINFOFLAGS@
MAKEINFO_EXTRA_FLAGS = @MAKEINFO_EXTRA_FLAGS@
MAKEINFO_CMD = $(MAKEINFO) $(MAKEINFOFLAGS) $(MAKEINFO_EXTRA_FLAGS)
MAKEHTML = $(MAKEINFO_CMD) --html
MAKEHTMLFLAGS =
# Set this up with gcc if you have gnu ld and the loader will print out
# line numbers for undefined references.
#CC_LD=g++ -static
CC_LD=$(CXX) $(CXX_DIALECT)
# Where is our "include" directory? Typically $(srcdir)/../include.
# This is essentially the header file directory for the library
# routines in libiberty.
INCLUDE_DIR = $(srcdir)/../include
INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
# Where is the "-liberty" library? Typically in ../libiberty.
LIBIBERTY = ../libiberty/libiberty.a
# Where is the BFD library? Typically in ../bfd.
BFD_DIR = ../bfd
BFD = $(BFD_DIR)/libbfd.a
BFD_SRC = $(srcdir)/$(BFD_DIR)
BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
# This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
# -I../zlib, unless we were configured with --with-system-zlib, in which
# case both are empty.
ZLIB = @zlibdir@ -lz
ZLIBINC = @zlibinc@
# Where is the decnumber library? Typically in ../libdecnumber.
LIBDECNUMBER_DIR = ../libdecnumber
LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a
LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)
LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)
# Where is the READLINE library? Typically in ../readline.
READLINE_DIR = ../readline
READLINE_SRC = $(srcdir)/$(READLINE_DIR)
READLINE = @READLINE@
READLINE_DEPS = @READLINE_DEPS@
READLINE_CFLAGS = @READLINE_CFLAGS@
# Where is expat? This will be empty if expat was not available.
LIBEXPAT = @LIBEXPAT@
# Where is lzma? This will be empty if lzma was not available.
LIBLZMA = @LIBLZMA@
# Where is libbabeltrace? This will be empty if lbabeltrace was not
# available.
LIBBABELTRACE = @LIBBABELTRACE@
# Where is libipt? This will be empty if libipt was not available.
LIBIPT = @LIBIPT@
WARN_CFLAGS = @WARN_CFLAGS@
WERROR_CFLAGS = @WERROR_CFLAGS@
GDB_WARN_CFLAGS = $(WARN_CFLAGS)
GDB_WERROR_CFLAGS = $(WERROR_CFLAGS)
GDB_WARN_CFLAGS_NO_FORMAT = `echo " $(GDB_WARN_CFLAGS) " \
| sed "s/ -Wformat-nonliteral / -Wno-format-nonliteral /g"`
GDB_WARN_CFLAGS_NO_DEFS = `echo " $(GDB_WARN_CFLAGS) " \
| sed "s/ -Wold-style-definition / -Wno-old-style-definition /g"`
RDYNAMIC = @RDYNAMIC@
# Where is the INTL library? Typically in ../intl.
INTL = @LIBINTL@
INTL_DEPS = @LIBINTL_DEP@
INTL_CFLAGS = @INCINTL@
# Where is the ICONV library? This will be empty if in libc or not available.
LIBICONV = @LIBICONV@
# Did the user give us a --with-gdb-datadir option?
GDB_DATADIR = @GDB_DATADIR@
# Flags to pass to gdb when invoked with "make run".
GDBFLAGS =
# Helper code from gnulib.
GNULIB_BUILDDIR = build-gnulib
LIBGNU = $(GNULIB_BUILDDIR)/import/libgnu.a
INCGNU = -I$(srcdir)/gnulib/import -I$(GNULIB_BUILDDIR)/import
# Generated headers in the gnulib directory. These must be listed
# so that they are generated before other files are compiled.
GNULIB_H = $(GNULIB_BUILDDIR)/import/string.h @GNULIB_STDINT_H@
#
# CLI sub directory definitons
#
SUBDIR_CLI_OBS = \
cli-dump.o \
cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
cli-logging.o \
cli-interp.o cli-utils.o
SUBDIR_CLI_SRCS = \
cli/cli-dump.c \
cli/cli-decode.c cli/cli-script.c cli/cli-cmds.c cli/cli-setshow.c \
cli/cli-logging.c \
cli/cli-interp.c cli/cli-utils.c
SUBDIR_CLI_DEPS =
SUBDIR_CLI_LDFLAGS=
SUBDIR_CLI_CFLAGS=
#
# MI sub directory definitons
#
SUBDIR_MI_OBS = \
mi-out.o mi-console.o \
mi-cmds.o mi-cmd-catch.o mi-cmd-env.o \
mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
mi-cmd-info.o mi-interp.o \
mi-main.o mi-parse.o mi-getopt.o
SUBDIR_MI_SRCS = \
mi/mi-out.c mi/mi-console.c \
mi/mi-cmds.c mi/mi-cmd-catch.c mi/mi-cmd-env.c \
mi/mi-cmd-var.c mi/mi-cmd-break.c mi/mi-cmd-stack.c \
mi/mi-cmd-file.c mi/mi-cmd-disas.c mi/mi-symbol-cmds.c \
mi/mi-cmd-target.c mi/mi-cmd-info.c mi/mi-interp.c \
mi/mi-main.c mi/mi-parse.c mi/mi-getopt.c
SUBDIR_MI_DEPS =
SUBDIR_MI_LDFLAGS=
SUBDIR_MI_CFLAGS=
#
# TUI sub directory definitions
#
SUBDIR_TUI_OBS = \
tui-command.o \
tui-data.o \
tui-disasm.o \
tui-file.o \
tui-hooks.o \
tui-interp.o \
tui-io.o \
tui-layout.o \
tui-out.o \
tui-regs.o \
tui-source.o \
tui-stack.o \
tui-win.o \
tui-windata.o \
tui-wingeneral.o \
tui-winsource.o \
tui.o
SUBDIR_TUI_SRCS = \
tui/tui-command.c \
tui/tui-data.c \
tui/tui-disasm.c \
tui/tui-file.c \
tui/tui-hooks.c \
tui/tui-interp.c \
tui/tui-io.c \
tui/tui-layout.c \
tui/tui-out.c \
tui/tui-regs.c \
tui/tui-source.c \
tui/tui-stack.c \
tui/tui-win.c \
tui/tui-windata.c \
tui/tui-wingeneral.c \
tui/tui-winsource.c \
tui/tui.c
SUBDIR_TUI_DEPS =
SUBDIR_TUI_LDFLAGS=
SUBDIR_TUI_CFLAGS= \
-DTUI=1
#
# GCC Compile support sub-directory definitions
#
SUBDIR_GCC_COMPILE_OBS = \
compile.o compile-c-symbols.o compile-c-types.o \
compile-object-load.o compile-object-run.o \
compile-loc2c.o compile-c-support.o
SUBDIR_GCC_COMPILE_SRCS = \
compile/compile.c \
compile/compile-c-symbols.c \
compile/compile-c-types.c \
compile/compile-object-load.c \
compile/compile-object-load.h \
compile/compile-object-run.c \
compile/compile-object-run.h \
compile/compile-loc2c.c \
compile/compile-c-support.c
# Guile sub directory definitons for guile support.
SUBDIR_GUILE_OBS = \
guile.o \
scm-arch.o \
scm-auto-load.o \
scm-block.o \
scm-breakpoint.o \
scm-cmd.o \
scm-disasm.o \
scm-exception.o \
scm-frame.o \
scm-gsmob.o \
scm-iterator.o \
scm-lazy-string.o \
scm-objfile.o \
scm-math.o \
scm-param.o \
scm-ports.o \
scm-pretty-print.o \
scm-progspace.o \
scm-safe-call.o \
scm-string.o \
scm-symbol.o \
scm-symtab.o \
scm-type.o \
scm-utils.o \
scm-value.o
SUBDIR_GUILE_SRCS = \
guile/guile.c \
guile/scm-arch.c \
guile/scm-auto-load.c \
guile/scm-block.c \
guile/scm-breakpoint.c \
guile/scm-cmd.c \
guile/scm-disasm.c \
guile/scm-exception.c \
guile/scm-frame.c \
guile/scm-gsmob.c \
guile/scm-iterator.c \
guile/scm-lazy-string.c \
guile/scm-objfile.c \
guile/scm-math.c \
guile/scm-param.c \
guile/scm-ports.c \
guile/scm-pretty-print.c \
guile/scm-progspace.c \
guile/scm-safe-call.c \
guile/scm-string.c \
guile/scm-symbol.c \
guile/scm-symtab.c \
guile/scm-type.c \
guile/scm-utils.c \
guile/scm-value.c
SUBDIR_GUILE_DEPS =
SUBDIR_GUILE_LDFLAGS=
SUBDIR_GUILE_CFLAGS=
#
# python sub directory definitons
#
SUBDIR_PYTHON_OBS = \
python.o \
py-arch.o \
py-auto-load.o \
py-block.o \
py-bpevent.o \
py-breakpoint.o \
py-cmd.o \
py-continueevent.o \
py-xmethods.o \
py-event.o \
py-evtregistry.o \
py-evts.o \
py-exitedevent.o \
py-finishbreakpoint.o \
py-frame.o \
py-framefilter.o \
py-function.o \
py-gdb-readline.o \
py-inferior.o \
py-infevents.o \
py-infthread.o \
py-lazy-string.o \
py-linetable.o \
py-newobjfileevent.o \
py-objfile.o \
py-param.o \
py-prettyprint.o \
py-progspace.o \
py-signalevent.o \
py-stopevent.o \
py-symbol.o \
py-symtab.o \
py-threadevent.o \
py-type.o \
py-unwind.o \
py-utils.o \
py-value.o \
py-varobj.o
SUBDIR_PYTHON_SRCS = \
python/python.c \
python/py-arch.c \
python/py-auto-load.c \
python/py-block.c \
python/py-bpevent.c \
python/py-breakpoint.c \
python/py-cmd.c \
python/py-continueevent.c \
python/py-xmethods.c \
python/py-event.c \
python/py-evtregistry.c \
python/py-evts.c \
python/py-exitedevent.c \
python/py-finishbreakpoint.c \
python/py-frame.c \
python/py-framefilter.c \
python/py-function.c \
python/py-gdb-readline.c \
python/py-inferior.c \
python/py-infevents.c \
python/py-infthread.c \
python/py-lazy-string.c \
python/py-linetable.c \
python/py-newobjfileevent.c \
python/py-objfile.c \
python/py-param.c \
python/py-prettyprint.c \
python/py-progspace.c \
python/py-signalevent.c \
python/py-stopevent.c \
python/py-symbol.c \
python/py-symtab.c \
python/py-threadevent.c \
python/py-type.c \
python/py-unwind.c \
python/py-utils.c \
python/py-value.c \
python/py-varobj.c
SUBDIR_PYTHON_DEPS =
SUBDIR_PYTHON_LDFLAGS=
SUBDIR_PYTHON_CFLAGS=
# Opcodes currently live in one of two places. Either they are in the
# opcode library, typically ../opcodes, or they are in a header file
# in INCLUDE_DIR.
# Where is the "-lopcodes" library, with (some of) the opcode tables and
# disassemblers?
OPCODES_DIR = ../opcodes
OPCODES_SRC = $(srcdir)/$(OPCODES_DIR)
OPCODES = $(OPCODES_DIR)/libopcodes.a
# Where are the other opcode tables which only have header file
# versions?
OP_INCLUDE = $(INCLUDE_DIR)/opcode
# Some source files like to use #include "opcodes/file.h"
OPCODES_CFLAGS = -I$(OP_INCLUDE) -I$(OPCODES_SRC)/..
# The simulator is usually nonexistent; targets that include one
# should set this to list all the .o or .a files to be linked in.
SIM = @SIM@
WIN32LIBS = @WIN32LIBS@
# Tcl et al cflags and libraries
TCL = @TCL_LIBRARY@
TCL_CFLAGS = @TCL_INCLUDE@
GDBTKLIBS = @GDBTKLIBS@
# Extra flags that the GDBTK files need:
GDBTK_CFLAGS = @GDBTK_CFLAGS@
TK = @TK_LIBRARY@
TK_CFLAGS = @TK_INCLUDE@
X11_CFLAGS = @TK_XINCLUDES@
X11_LDFLAGS =
X11_LIBS =
WIN32LDAPP = @WIN32LDAPP@
LIBGUI = @LIBGUI@
GUI_CFLAGS_X = @GUI_CFLAGS_X@
IDE_CFLAGS=$(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
ALL_TCL_CFLAGS = $(TCL_CFLAGS) $(TK_CFLAGS)
# The version of gdbtk we're building. This should be kept
# in sync with GDBTK_VERSION and friends in gdbtk.h.
GDBTK_VERSION = 1.0
GDBTK_LIBRARY = $(datadir)/insight$(GDBTK_VERSION)
# Gdbtk requires an absolute path to the source directory or
# the testsuite won't run properly.
GDBTK_SRC_DIR = @GDBTK_SRC_DIR@
SUBDIR_GDBTK_OBS = \
gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
SUBDIR_GDBTK_SRCS = \
gdbtk/generic/gdbtk.c gdbtk/generic/gdbtk-bp.c \
gdbtk/generic/gdbtk-cmds.c gdbtk/generic/gdbtk-hooks.c \
gdbtk/generic/gdbtk-interp.c \
gdbtk/generic/gdbtk-register.c gdbtk/generic/gdbtk-stack.c \
gdbtk/generic/gdbtk-varobj.c gdbtk/generic/gdbtk-wrapper.c \
gdbtk/generic/gdbtk-main.c
SUBDIR_GDBTK_DEPS = $(LIBGUI) $(TCL_DEPS) $(TK_DEPS)
SUBDIR_GDBTK_LDFLAGS=
SUBDIR_GDBTK_CFLAGS= -DGDBTK
CONFIG_OBS= @CONFIG_OBS@
CONFIG_SRCS= @CONFIG_SRCS@
CONFIG_DEPS= @CONFIG_DEPS@
CONFIG_LDFLAGS = @CONFIG_LDFLAGS@
ENABLE_CFLAGS= @ENABLE_CFLAGS@
CONFIG_ALL= @CONFIG_ALL@
CONFIG_CLEAN= @CONFIG_CLEAN@
CONFIG_INSTALL = @CONFIG_INSTALL@
CONFIG_UNINSTALL = @CONFIG_UNINSTALL@
HAVE_NATIVE_GCORE_TARGET = @HAVE_NATIVE_GCORE_TARGET@
# -I. for config files.
# -I$(srcdir) for gdb internal headers.
# -I$(srcdir)/config for more generic config files.
# It is also possible that you will need to add -I/usr/include/sys if
# your system doesn't have fcntl.h in /usr/include (which is where it
# should be according to Posix).
DEFS = @DEFS@
GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/common -I$(srcdir)/config \
-DLOCALEDIR="\"$(localedir)\"" $(DEFS)
# MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
GLOBAL_CFLAGS = $(MH_CFLAGS)
PROFILE_CFLAGS = @PROFILE_CFLAGS@
# These are specifically reserved for setting from the command line
# when running make. I.E.: "make CFLAGS=-Wmissing-prototypes".
CFLAGS = @CFLAGS@
CXXFLAGS = @CXXFLAGS@
# Set by configure, for e.g. expat. Python installations are such that
# C headers are included using their basename (for example, we #include
# <Python.h> rather than, say, <python/Python.h>). Since the file names
# are sometimes a little generic, we think that the risk of collision
# with other header files is high. If that happens, we try to mitigate
# a bit the consequences by putting the Python includes last in the list.
INTERNAL_CPPFLAGS = @CPPFLAGS@ @GUILE_CPPFLAGS@ @PYTHON_CPPFLAGS@
# INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
INTERNAL_CFLAGS_BASE = \
$(CXXFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
$(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) $(ZLIBINC) \
$(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \
$(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS)
INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS)
INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)
# LDFLAGS is specifically reserved for setting from the command line
# when running make.
LDFLAGS = @LDFLAGS@
# Profiling options need to go here to work.
# I think it's perfectly reasonable for a user to set -pg in CFLAGS
# and have it work; that's why CFLAGS is here.
# PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
INTERNAL_LDFLAGS = \
$(CXXFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) \
$(LDFLAGS) $(CONFIG_LDFLAGS)
# If your system is missing alloca(), or, more likely, it's there but
# it doesn't work, then refer to libiberty.
# Libraries and corresponding dependencies for compiling gdb.
# XM_CLIBS, defined in *config files, have host-dependent libs.
# LIBIBERTY appears twice on purpose.
CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(ZLIB) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
$(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) \
@LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
$(LIBEXPAT) $(LIBLZMA) $(LIBBABELTRACE) $(LIBIPT) \
$(LIBIBERTY) $(WIN32LIBS) $(LIBGNU) $(LIBICONV)
CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
$(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
ADD_DEPS = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
DIST=gdb
LINT=/usr/5bin/lint
LINTFLAGS= $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
$(BFD_CFLAGS) $(INCLUDE_CFLAGS) \
$(INTL_CFLAGS)
RUNTEST = runtest
RUNTESTFLAGS=
# XML files to build in to GDB.
XMLFILES = $(srcdir)/features/gdb-target.dtd $(srcdir)/features/xinclude.dtd \
$(srcdir)/features/library-list.dtd \
$(srcdir)/features/library-list-aix.dtd \
$(srcdir)/features/library-list-svr4.dtd $(srcdir)/features/osdata.dtd \
$(srcdir)/features/threads.dtd $(srcdir)/features/traceframe-info.dtd \
$(srcdir)/features/btrace.dtd $(srcdir)/features/btrace-conf.dtd
# This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
# interface to the serial port. Hopefully if get ported to OS/2, VMS,
# etc., then there will be (as part of the C library or perhaps as
# part of libiberty) a POSIX interface. But at least for now the
# host-dependent makefile fragment might need to use something else
# besides ser-unix.o
SER_HARDWIRE = @SER_HARDWIRE@
# The `remote' debugging target is supported for most architectures,
# but not all (e.g. 960)
REMOTE_OBS = remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o \
remote-notif.o ctf.o tracefile.o tracefile-tfile.o
# This is remote-sim.o if a simulator is to be linked in.
SIM_OBS = @SIM_OBS@
# Target-dependent object files.
TARGET_OBS = @TARGET_OBS@
# All target-dependent objects files that require 64-bit CORE_ADDR
# (used with --enable-targets=all --enable-64-bit-bfd).
ALL_64_TARGET_OBS = \
aarch64-tdep.o aarch64-linux-tdep.o aarch64-newlib-tdep.o aarch64-insn.o \
alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
alphanbsd-tdep.o alphaobsd-tdep.o alpha-tdep.o \
amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \
amd64-linux-tdep.o amd64nbsd-tdep.o \
amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o amd64-windows-tdep.o \
ia64-linux-tdep.o ia64-vms-tdep.o ia64-tdep.o \
mips64obsd-tdep.o \
sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
# All other target-dependent objects files (used with --enable-targets=all).
ALL_TARGET_OBS = \
arc-tdep.o \
armbsd-tdep.o arm.o arm-linux.o arm-linux-tdep.o \
arm-get-next-pcs.o arm-symbian-tdep.o \
armnbsd-tdep.o armobsd-tdep.o \
arm-tdep.o arm-wince-tdep.o \
avr-tdep.o \
bfin-linux-tdep.o bfin-tdep.o \
cris-linux-tdep.o cris-tdep.o \
dicos-tdep.o \
fbsd-tdep.o \
frv-linux-tdep.o frv-tdep.o \
ft32-tdep.o \
h8300-tdep.o \
hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
hppa-linux-tdep.o hppa-tdep.o \
i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
i386-dicos-tdep.o i386-darwin-tdep.o \
iq2000-tdep.o \
linux-tdep.o \
lm32-tdep.o \
m32c-tdep.o \
m32r-linux-tdep.o m32r-tdep.o \
m68hc11-tdep.o \
m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
m88k-tdep.o \
mep-tdep.o \
microblaze-tdep.o microblaze-linux-tdep.o \
mips-linux-tdep.o mips-sde-tdep.o \
mipsnbsd-tdep.o mips-tdep.o \
mn10300-linux-tdep.o mn10300-tdep.o \
moxie-tdep.o \
msp430-tdep.o \
mt-tdep.o \
nds32-tdep.o \
nios2-tdep.o nios2-linux-tdep.o \
nto-tdep.o \
ppc-linux-tdep.o ppcfbsd-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o \
ppc-sysv-tdep.o ppc64-tdep.o rl78-tdep.o \
rs6000-aix-tdep.o rs6000-tdep.o solib-aix.o ppc-ravenscar-thread.o \
rs6000-lynx178-tdep.o \
rx-tdep.o \
s390-linux-tdep.o \
score-tdep.o \
sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
sparc-sol2-tdep.o sparc-tdep.o sparc-ravenscar-thread.o \
spu-tdep.o spu-multiarch.o solib-spu.o \
tic6x-tdep.o tic6x-linux-tdep.o \
tilegx-tdep.o tilegx-linux-tdep.o \
v850-tdep.o \
vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
xstormy16-tdep.o \
xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
glibc-tdep.o \
bsd-uthread.o \
nbsd-tdep.o obsd-tdep.o \
sol2-tdep.o \
solib-frv.o solib-svr4.o \
solib-darwin.o solib-dsbt.o \
xcoffread.o \
symfile-mem.o \
windows-tdep.o \
linux-record.o \
ravenscar-thread.o
# Host-dependent makefile fragment comes in here.
@host_makefile_frag@
# End of host-dependent makefile fragment
FLAGS_TO_PASS = \
"prefix=$(prefix)" \
"exec_prefix=$(exec_prefix)" \
"infodir=$(infodir)" \
"datarootdir=$(datarootdir)" \
"docdir=$(docdir)" \
"htmldir=$(htmldir)" \
"pdfdir=$(pdfdir)" \
"libdir=$(libdir)" \
"mandir=$(mandir)" \
"datadir=$(datadir)" \
"includedir=$(includedir)" \
"against=$(against)" \
"DESTDIR=$(DESTDIR)" \
"AR=$(AR)" \
"AR_FLAGS=$(AR_FLAGS)" \
"CC=$(CC)" \
"CFLAGS=$(CFLAGS)" \
"CXX=$(CXX)" \
"CXX_DIALECT=$(CXX_DIALECT)" \
"CXXFLAGS=$(CXXFLAGS)" \
"DLLTOOL=$(DLLTOOL)" \
"LDFLAGS=$(LDFLAGS)" \
"RANLIB=$(RANLIB)" \
"MAKEINFO=$(MAKEINFO)" \
"MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
"MAKEINFO_EXTRA_FLAGS=$(MAKEINFO_EXTRA_FLAGS)" \
"MAKEHTML=$(MAKEHTML)" \
"MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
"INSTALL=$(INSTALL)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)"
# Flags that we pass when building the testsuite.
# empty for native, $(target_alias)/ for cross
target_subdir = @target_subdir@
CC_FOR_TARGET = ` \
if [ -f $${rootme}/../gcc/xgcc ] ; then \
if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
else \
echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
fi; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CC); \
else \
t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
fi; \
fi`
CXX_FOR_TARGET = ` \
if [ -f $${rootme}/../gcc/xg++ ] ; then \
if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
else \
echo $${rootme}/../gcc/xg++ -B$${rootme}/../gcc/; \
fi; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CXX); \
else \
t='$(program_transform_name)'; echo g++ | sed -e '' $$t; \
fi; \
fi`
# The use of $$(x_FOR_TARGET) reduces the command line length by not
# duplicating the lengthy definition.
TARGET_FLAGS_TO_PASS = \
"prefix=$(prefix)" \
"exec_prefix=$(exec_prefix)" \
"against=$(against)" \
'CC=$$(CC_FOR_TARGET)' \
"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
"CFLAGS=$(CFLAGS)" \
'CXX=$$(CXX_FOR_TARGET)' \
"CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
"CXXFLAGS=$(CXXFLAGS)" \
"INSTALL=$(INSTALL)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"MAKEINFO=$(MAKEINFO)" \
"MAKEHTML=$(MAKEHTML)" \
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
"FORCE_PARALLEL=$(FORCE_PARALLEL)" \
"TESTS=$(TESTS)"
# All source files that go into linking GDB.
# Links made at configuration time should not be specified here, since
# SFILES is used in building the distribution archive.
SFILES = ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \
ada-varobj.c \
addrmap.c auto-load.c \
auxv.c ax-general.c ax-gdb.c \
agent.c \
bcache.c \
bfd-target.c \
block.c blockframe.c \
breakpoint.c break-catch-sig.c break-catch-throw.c \
break-catch-syscall.c \
build-id.c buildsym.c \
c-exp.y c-lang.c c-typeprint.c c-valprint.c c-varobj.c \
charset.c common/cleanups.c cli-out.c coffread.c coff-pe-read.c \
complaints.c completer.c continuations.c corefile.c corelow.c \
cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
d-exp.y d-lang.c d-namespace.c d-valprint.c \
cp-name-parser.y \
dbxread.c demangle.c dictionary.c disasm.c doublest.c \
dtrace-probe.c dummy-frame.c \
dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
dwarf2-frame-tailcall.c \
elfread.c environ.c eval.c event-loop.c event-top.c \
exceptions.c expprint.c extension.c \
f-exp.y f-lang.c f-typeprint.c f-valprint.c filesystem.c \
findcmd.c findvar.c frame.c frame-base.c frame-unwind.c \
gdbarch.c arch-utils.c gdb_bfd.c gdb_obstack.c \
gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
go-exp.y go-lang.c go-typeprint.c go-valprint.c \
inf-loop.c \
infcall.c \
infcmd.c inflow.c infrun.c \
inline-frame.c \
interps.c \
language.c linespec.c location.c minidebug.c \
m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
memrange.c mi/mi-common.c \
namespace.c \
objc-lang.c \
objfiles.c osabi.c observer.c osdata.c \
opencl-lang.c \
p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
proc-service.list progspace.c \
prologue-value.c psymtab.c \
regcache.c reggroups.c remote.c remote-fileio.c remote-notif.c reverse.c \
rust-exp.y rust-lang.c \
selftest.c sentinel-frame.c \
serial.c ser-base.c ser-unix.c ser-event.c skip.c \
solib.c solib-target.c source.c \
stabsread.c stack.c probe.c stap-probe.c std-regs.c \
symfile.c symfile-debug.c symfile-mem.c symmisc.c symtab.c \
target.c target-dcache.c target-descriptions.c target-memory.c \
tid-parse.c thread.c top.c tracepoint.c \
trad-frame.c \
tramp-frame.c \
typeprint.c \
ui-out.c utils.c ui-file.h ui-file.c \
user-regs.c \
valarith.c valops.c valprint.c value.c varobj.c common/vec.c \
xml-tdesc.c xml-support.c \
inferior.c gdb_usleep.c \
record.c record-full.c gcore.c \
jit.c \
xml-syscall.c \
annotate.c common/signals.c copying.c dfp.c gdb.c inf-child.c \
sol-thread.c stub-termcap.c \
common/gdb_vecs.c common/common-utils.c common/xml-utils.c \
common/ptid.c common/buffer.c gdb-dlfcn.c common/agent.c \
common/format.c common/filestuff.c btrace.c record-btrace.c ctf.c \
target/waitstatus.c common/print-utils.c common/rsp-low.c \
common/errors.c common/common-debug.c common/common-exceptions.c \
common/btrace-common.c common/fileio.c common/common-regcache.c \
common/signals-state-save-restore.c common/new-op.c \
$(SUBDIR_GCC_COMPILE_SRCS)
LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c
# Header files that need to have srcdir added. Note that in the cases
# where we use a macro like $(gdbcmd_h), things are carefully arranged
# so that each .h file is listed exactly once (M-x tags-search works
# wrong if TAGS has files twice). Because this is tricky to get
# right, it is probably easiest just to list .h files here directly.
HFILES_NO_SRCDIR = \
common/gdb_signals.h nat/gdb_thread_db.h common/gdb_vecs.h \
common/x86-xstate.h nat/linux-ptrace.h nat/mips-linux-watch.h \
proc-utils.h aarch64-tdep.h arc-tdep.h arm-tdep.h ax-gdb.h ppcfbsd-tdep.h \
ppcnbsd-tdep.h cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h \
exec.h m32r-tdep.h osabi.h gdbcore.h x86bsd-nat.h \
i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
ia64-tdep.h ada-lang.h varobj.h varobj-iter.h frv-tdep.h \
nto-tdep.h serial.h \
c-lang.h d-lang.h go-lang.h frame.h event-loop.h block.h cli/cli-setshow.h \
cli/cli-decode.h cli/cli-cmds.h cli/cli-utils.h \
cli/cli-script.h macrotab.h symtab.h common/version.h \
compile/compile.h gnulib/import/string.in.h gnulib/import/str-two-way.h \
gnulib/import/stdint.in.h remote.h remote-notif.h gdb.h sparc-nat.h \
gdbthread.h dwarf2-frame.h dwarf2-frame-tailcall.h nbsd-nat.h dcache.h \
amd64-nat.h s390-linux-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
gdbarch.h bsd-uthread.h memory-map.h memrange.h obsd-nat.h \
mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
ser-unix.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
objfiles.h common/vec.h disasm.h mips-tdep.h ser-base.h \
gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
inflow.h fbsd-nat.h ia64-libunwind-tdep.h completer.h \
solib-target.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
m2-lang.h stack.h charset.h addrmap.h command.h solist.h source.h \
target.h target-dcache.h prologue-value.h cp-abi.h tui/tui-hooks.h tui/tui.h \
tui/tui-file.h tui/tui-command.h tui/tui-disasm.h tui/tui-wingeneral.h \
tui/tui-windata.h tui/tui-data.h tui/tui-win.h tui/tui-stack.h \
tui/tui-winsource.h tui/tui-regs.h tui/tui-io.h tui/tui-layout.h \
tui/tui-source.h sol2-tdep.h gregset.h sh-tdep.h sh64-tdep.h \
expression.h score-tdep.h gdb_select.h ser-tcp.h \
extension.h extension-priv.h nat/aarch64-linux-hw-point.h \
build-id.h buildsym.h valprint.h nat/aarch64-linux.h \
typeprint.h mi/mi-getopt.h mi/mi-parse.h mi/mi-console.h \
mi/mi-out.h mi/mi-main.h mi/mi-common.h mi/mi-cmds.h linux-nat.h \
complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
common/gdb_wait.h common/gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
amd64-linux-tdep.h linespec.h location.h i387-tdep.h mn10300-tdep.h \
sparc64-tdep.h ppcobsd-tdep.h \
coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
m68k-tdep.h spu-tdep.h environ.h amd64-tdep.h \
doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h ppc64-tdep.h \
rs6000-tdep.h rs6000-aix-tdep.h \
common/gdb_locale.h arch-utils.h trad-frame.h gnu-nat.h \
language.h nbsd-tdep.h solib-svr4.h \
macroexp.h ui-file.h regcache.h tracepoint.h tracefile.h i386-tdep.h \
inf-child.h p-lang.h event-top.h gdbtypes.h user-regs.h \
regformats/regdef.h config/i386/nm-i386gnu.h \
config/i386/nm-fbsd.h \
config/nm-nto.h config/sparc/nm-sol2.h config/nm-linux.h \
top.h bsd-kvm.h gdb-stabs.h reggroups.h \
annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
gdb_usleep.h jit.h xml-syscall.h microblaze-tdep.h \
psymtab.h psympriv.h progspace.h bfin-tdep.h \
amd64-darwin-tdep.h charset-list.h \
config/djgpp/langinfo.h config/djgpp/nl_types.h darwin-nat.h \
dicos-tdep.h filesystem.h gcore.h gdb_wchar.h hppabsd-tdep.h \
i386-darwin-tdep.h x86-nat.h linux-record.h moxie-tdep.h nios2-tdep.h \
ft32-tdep.h nds32-tdep.h \
osdata.h procfs.h python/py-event.h python/py-events.h python/py-stopevent.h \
python/python-internal.h python/python.h ravenscar-thread.h record.h \
record-full.h solib-aix.h \
solib-darwin.h solib-spu.h windows-nat.h xcoffread.h \
gnulib/import/extra/snippet/arg-nonnull.h gnulib/import/extra/snippet/c++defs.h \
gnulib/import/extra/snippet/warn-on-use.h \
gnulib/import/stddef.in.h gnulib/import/inttypes.in.h inline-frame.h skip.h \
common/common-utils.h common/xml-utils.h common/buffer.h common/ptid.h \
common/format.h common/host-defs.h utils.h common/queue.h \
nat/linux-osdata.h gdb-dlfcn.h auto-load.h probe.h stap-probe.h \
gdb_bfd.h sparc-ravenscar-thread.h ppc-ravenscar-thread.h nat/linux-btrace.h \
nat/ppc-linux.h ctf.h nat/x86-cpuid.h nat/x86-gcc-cpuid.h target/resume.h \
target/wait.h target/waitstatus.h nat/linux-nat.h nat/linux-waitpid.h \
common/print-utils.h common/rsp-low.h nat/x86-dregs.h x86-linux-nat.h \
i386-linux-nat.h common/common-defs.h common/errors.h common/common-types.h \
common/common-debug.h common/cleanups.h common/gdb_setjmp.h \
common/common-exceptions.h target/target.h common/symbol.h \
common/common-regcache.h fbsd-tdep.h nat/linux-personality.h \
common/fileio.h nat/x86-linux.h nat/x86-linux-dregs.h nat/amd64-linux-siginfo.h\
nat/linux-namespaces.h arch/arm.h common/gdb_sys_time.h arch/aarch64-insn.h \
tid-parse.h ser-event.h \
common/signals-state-save-restore.h
# Header files that already have srcdir in them, or which are in objdir.
HFILES_WITH_SRCDIR = ../bfd/bfd.h jit-reader.h
# GDB "info" files, which should be included in their entirety
INFOFILES = gdb.info*
# {X,T,NAT}DEPFILES are something of a pain in that it's hard to
# default their values the way we do for SER_HARDWIRE; in the future
# maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
# variables analogous to SER_HARDWIRE which get defaulted in this
# Makefile.in
DEPFILES = $(TARGET_OBS) $(SER_HARDWIRE) $(NATDEPFILES) \
$(REMOTE_OBS) $(SIM_OBS)
SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) $(CONFIG_SRCS)
# Don't include YYFILES (*.c) because we already include *.y in SFILES,
# and it's more useful to see it in the .y file.
TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \
$(CONFIG_SRCS)
TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
version.o \
annotate.o \
addrmap.o \
auto-load.o auxv.o \
agent.o \
bfd-target.o \
blockframe.o breakpoint.o break-catch-sig.o break-catch-throw.o \
break-catch-syscall.o \
findvar.o regcache.o cleanups.o \
charset.o continuations.o corelow.o disasm.o dummy-frame.o dfp.o \
source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
block.o symtab.o psymtab.o symfile.o symfile-debug.o symmisc.o \
linespec.o dictionary.o namespace.o \
location.o infcall.o \
infcmd.o infrun.o \
expprint.o environ.o stack.o tid-parse.o thread.o thread-fsm.o \
exceptions.o \
extension.o \
filesystem.o \
filestuff.o \
inf-child.o \
interps.o \
minidebug.o \
main.o \
macrotab.o macrocmd.o macroexp.o macroscope.o \
mi-common.o \
event-loop.o event-top.o inf-loop.o completer.o \
gdbarch.o arch-utils.o gdbtypes.o gdb_bfd.o gdb_obstack.o \
osabi.o copying.o \
memattr.o mem-break.o target.o target-dcache.o parse.o language.o \
build-id.o buildsym.o \
findcmd.o \
std-regs.o \
signals-state-save-restore.o \
signals.o \
exec.o reverse.o \
bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
dbxread.o coffread.o coff-pe-read.o \
dwarf2read.o mipsread.o stabsread.o corefile.o \
dwarf2expr.o dwarf2loc.o dwarf2-frame.o dwarf2-frame-tailcall.o \
ada-lang.o c-lang.o d-lang.o f-lang.o objc-lang.o \
ada-tasks.o ada-varobj.o c-varobj.o \
ui-out.o cli-out.o \
varobj.o vec.o \
go-lang.o go-valprint.o go-typeprint.o \
m2-lang.o opencl-lang.o p-lang.o p-typeprint.o p-valprint.o \
selftest.o sentinel-frame.o \
complaints.o typeprint.o \
ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
ada-valprint.o c-valprint.o cp-valprint.o d-valprint.o f-valprint.o \
m2-valprint.o \
ser-event.o serial.o mdebugread.o top.o utils.o utils-selftests.o \
ui-file.o \
user-regs.o \
frame.o frame-unwind.o doublest.o \
frame-base.o \
inline-frame.o \
gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
cp-namespace.o d-namespace.o \
reggroups.o \
rust-lang.o \
trad-frame.o \
tramp-frame.o \
solib.o solib-target.o \
prologue-value.o memory-map.o memrange.o \
xml-support.o xml-syscall.o xml-utils.o \
target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
inferior.o osdata.o gdb_usleep.o record.o record-full.o gcore.o \
gdb_vecs.o jit.o progspace.o skip.o probe.o \
common-utils.o buffer.o ptid.o gdb-dlfcn.o common-agent.o \
format.o registry.o btrace.o record-btrace.o waitstatus.o \
print-utils.o rsp-low.o errors.o common-debug.o debug.o \
common-exceptions.o btrace-common.o fileio.o \
common-regcache.o new-op.o \
$(SUBDIR_GCC_COMPILE_OBS)
TSOBS = inflow.o
SUBDIRS = doc @subdirs@ data-directory $(GNULIB_BUILDDIR)
CLEANDIRS = $(SUBDIRS)
# List of subdirectories in the build tree that must exist.
# This is used to force build failures in existing trees when
# a new directory is added.
# The format here is for the `case' shell command.
REQUIRED_SUBDIRS = doc | testsuite | $(GNULIB_BUILDDIR) | data-directory
# For now, shortcut the "configure GDB for fewer languages" stuff.
YYFILES = c-exp.c \
cp-name-parser.c \
ada-lex.c \
ada-exp.c \
d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c rust-exp.c
YYOBJ = c-exp.o \
cp-name-parser.o \
ada-exp.o \
d-exp.o f-exp.o go-exp.o m2-exp.o p-exp.o rust-exp.o
# Things which need to be built when making a distribution.
DISTSTUFF = $(YYFILES)
# All generated files which can be included by another file.
generated_files = config.h observer.h observer.inc ada-lex.c jit-reader.h \
$(GNULIB_H) $(NAT_GENERATED_FILES) gcore
# Flags needed to compile Python code
PYTHON_CFLAGS=@PYTHON_CFLAGS@
all: gdb$(EXEEXT) $(CONFIG_ALL)
@$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
# Rule for compiling .c files in the top-level gdb directory.
%.o: %.c
$(COMPILE) $<
$(POSTCOMPILE)
# Rules for compiling .c files in the various source subdirectories.
%.o: ${srcdir}/arch/%.c
$(COMPILE) $<
$(POSTCOMPILE)
%.o: $(srcdir)/cli/%.c
$(COMPILE) $<
$(POSTCOMPILE)
%.o: ${srcdir}/common/%.c
$(COMPILE) $<
$(POSTCOMPILE)
%.o: $(srcdir)/compile/%.c
$(COMPILE) $<
$(POSTCOMPILE)
%.o: $(srcdir)/gdbtk/generic/%.c
$(COMPILE) $(all_gdbtk_cflags) %<
$(POSTCOMPILE)
%.o: $(srcdir)/guile/%.c
$(COMPILE) $<
$(POSTCOMPILE)
%.o: $(srcdir)/mi/%.c
$(COMPILE) $<
%.o: ${srcdir}/nat/%.c
$(COMPILE) $<
$(POSTCOMPILE)
%.o: $(srcdir)/python/%.c
$(COMPILE) $(PYTHON_CFLAGS) $<
$(POSTCOMPILE)
%.o: ${srcdir}/target/%.c
$(COMPILE) $<
$(POSTCOMPILE)
%.o: $(srcdir)/tui/%.c
$(COMPILE) $<
$(POSTCOMPILE)
# Specify an explicit rule for gdb/common/agent.c, to avoid a clash with the
# object file generate by gdb/agent.c.
common-agent.o: $(srcdir)/common/agent.c
$(COMPILE) $(srcdir)/common/agent.c
$(POSTCOMPILE)
installcheck:
# The check target can not use subdir_do, because subdir_do does not
# use TARGET_FLAGS_TO_PASS.
check: force
@if [ -f testsuite/Makefile ]; then \
rootme=`pwd`; export rootme; \
rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
cd testsuite; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) check; \
else true; fi
check-perf: force
@if [ -f testsuite/Makefile ]; then \
rootme=`pwd`; export rootme; \
rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
cd testsuite; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) check-perf; \
else true; fi
check-read1: force
@if [ -f testsuite/Makefile ]; then \
rootme=`pwd`; export rootme; \
rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
cd testsuite; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) check-read1; \
else true; fi
check-parallel: force
@if [ -f testsuite/Makefile ]; then \
rootme=`pwd`; export rootme; \
rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
cd testsuite; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) check-parallel; \
else true; fi
# The idea is to parallelize testing of multilibs, for example:
# make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
# will run 3 concurrent sessions of check, eventually testing all 10
# combinations. GNU make is required for the % pattern to work, as is
# a shell that expands alternations within braces. If GNU make is not
# used, this rule will harmlessly fail to match. Used FORCE_PARALLEL to
# prevent serialized checking due to the passed RUNTESTFLAGS.
# FIXME: use config.status --config not --version, when available.
check//%: force
@if [ -f testsuite/config.status ]; then \
rootme=`pwd`; export rootme; \
rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
target=`echo "$@" | sed 's,//.*,,'`; \
variant=`echo "$@" | sed 's,^[^/]*//,,'`; \
vardots=`echo "$$variant" | sed 's,/,.,g'`; \
testdir=testsuite.$$vardots; \
if [ ! -f $$testdir/Makefile ] && [ -f testsuite/config.status ]; then \
configargs=`cd testsuite && ./config.status --version | \
sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
$(SHELL) $(srcdir)/../mkinstalldirs $$testdir && \
(cd $$testdir && \
eval $(SHELL) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
"\"--srcdir=\$$rootsrc/testsuite\"" \
); \
else :; fi && cd $$testdir && \
$(MAKE) $(TARGET_FLAGS_TO_PASS) \
RUNTESTFLAGS="--target_board=$$variant $(RUNTESTFLAGS)" \
FORCE_PARALLEL=$(if $(FORCE_PARALLEL),1,$(if $(RUNTESTFLAGS),,1)) \
"$$target"; \
else true; fi
# The set of headers checked by 'check-headers' by default.
CHECK_HEADERS = $(HFILES_NO_SRCDIR)
# Try to compile each header in isolation, thus ensuring headers are
# self-contained.
#
# Defaults to checking all $HFILES_NO_SRCDIR headers.
#
# Do:
#
# make check-headers CHECK_HEADERS="header.h list.h"
#
# to check specific headers.
#
check-headers:
@echo Checking headers.
for i in $(CHECK_HEADERS) ; do \
$(CC) -x c -c -fsyntax-only $(INTERNAL_CFLAGS) \
-include defs.h $(srcdir)/$$i ; \
done
.PHONY: check-headers
info install-info clean-info dvi pdf install-pdf html install-html: force
@$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
# Traditionally "install" depends on "all". But it may be useful
# not to; for example, if the user has made some trivial change to a
# source file and doesn't care about rebuilding or just wants to save the
# time it takes for make to check that all is up to date.
# install-only is intended to address that need.
install: all
@$(MAKE) $(FLAGS_TO_PASS) install-only
install-only: $(CONFIG_INSTALL)
transformed_name=`t='$(program_transform_name)'; \
echo gdb | sed -e "$$t"` ; \
if test "x$$transformed_name" = x; then \
transformed_name=gdb ; \
else \
true ; \
fi ; \
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
$(INSTALL_PROGRAM) gdb$(EXEEXT) \
$(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(includedir)/gdb ; \
$(INSTALL_DATA) jit-reader.h $(DESTDIR)$(includedir)/gdb/jit-reader.h
if test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x; \
then \
transformed_name=`t='$(program_transform_name)'; \
echo gcore | sed -e "$$t"` ; \
if test "x$$transformed_name" = x; then \
transformed_name=gcore ; \
else \
true ; \
fi ; \
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
$(INSTALL_SCRIPT) gcore \
$(DESTDIR)$(bindir)/$$transformed_name; \
fi
@$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
install-strip:
$(MAKE) $(FLAGS_TO_PASS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install-only
install-guile:
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/guile/gdb
install-python:
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(GDB_DATADIR)/python/gdb
uninstall: force $(CONFIG_UNINSTALL)
transformed_name=`t='$(program_transform_name)'; \
echo gdb | sed -e $$t` ; \
if test "x$$transformed_name" = x; then \
transformed_name=gdb ; \
else \
true ; \
fi ; \
rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
$(DESTDIR)$(man1dir)/$$transformed_name.1
if test "x$(HAVE_NATIVE_GCORE_TARGET)$(HAVE_NATIVE_GCORE_HOST)" != x; \
then \
transformed_name=`t='$(program_transform_name)'; \
echo gcore | sed -e "$$t"` ; \
if test "x$$transformed_name" = x; then \
transformed_name=gcore ; \
else \
true ; \
fi ; \
rm -f $(DESTDIR)$(bindir)/$$transformed_name; \
fi
@$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
# The C++ name parser can be built standalone for testing.
test-cp-name-parser.o: cp-name-parser.c
$(COMPILE) -DTEST_CPNAMES cp-name-parser.c
$(POSTCOMPILE)
test-cp-name-parser$(EXEEXT): test-cp-name-parser.o $(LIBIBERTY)
$(CC_LD) $(INTERNAL_LDFLAGS) -o test-cp-name-parser$(EXEEXT) \
test-cp-name-parser.o $(LIBIBERTY)
# We do this by grepping through sources. If that turns out to be too slow,
# maybe we could just require every .o file to have an initialization routine
# of a given name (top.o -> _initialize_top, etc.).
#
# Formatting conventions: The name of the _initialize_* routines must start
# in column zero, and must not be inside #if.
#
# Note that the set of files with init functions might change, or the names
# of the functions might change, so this files needs to depend on all the
# object files that will be linked into gdb.
# FIXME: There is a problem with this approach - init.c may force
# unnecessary files to be linked in.
# FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
# the first call is to _initialize_gdbtypes (implemented by explicitly
# putting that function's name first in the init.l-tmp file). This is
# a hack to ensure that all the architecture dependant global
# builtin_type_* variables are initialized before anything else
# (per-architecture code is called in the same order that it is
# registered). The ``correct fix'' is to have all the builtin types
# made part of the architecture and initialize them on-demand (using
# gdbarch_data) just like everything else. The catch is that other
# modules still take the address of these builtin types forcing them
# to be variables, sigh!
# NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
# anchored on the first column and excludes the ``/'' character so
# that it doesn't add the $(srcdir) prefix to any file that already
# has an absolute path. It turns out that $(DEC)'s True64 make
# automatically adds the $(srcdir) prefixes when it encounters files
# in sub-directories such as cli/ and mi/.
# NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
# duplicates. Files in the gdb/ directory can end up appearing in
# COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
INIT_FILES = $(COMMON_OBS) $(TSOBS) $(CONFIG_SRCS) $(SUBDIR_GCC_COMPILE_SRCS)
init.c: $(INIT_FILES)
@echo Making init.c
@rm -f init.c-tmp init.l-tmp
@touch init.c-tmp
@echo gdbtypes > init.l-tmp
@-LANG=C ; export LANG ; \
LC_ALL=C ; export LC_ALL ; \
echo $(INIT_FILES) | \
tr ' ' '\012' | \
sed \
-e '/^gdbtypes.[co]$$/d' \
-e '/^init.[co]$$/d' \
-e '/xdr_ld.[co]$$/d' \
-e '/xdr_ptrace.[co]$$/d' \
-e '/xdr_rdb.[co]$$/d' \
-e '/udr.[co]$$/d' \
-e '/udip2soc.[co]$$/d' \
-e '/udi2go32.[co]$$/d' \
-e '/version.[co]$$/d' \
-e '/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
-e '/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
-e 's/-exp\.o$$/-exp.y/' \
-e 's/\.[co]$$/.c/' \
-e 's,signals\.c,common/signals\.c,' \
-e 's|^\([^ /][^ ]*\)|$(srcdir)/\1|g' | \
while read f; do \
sed -n -e 's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev/null; \
done | \
while read f; do \
case " $$fs " in \
*" $$f "* ) ;; \
* ) echo $$f ; fs="$$fs $$f";; \
esac; \
done >> init.l-tmp
@echo '/* Do not modify this file. */' >>init.c-tmp
@echo '/* It is created automatically by the Makefile. */'>>init.c-tmp
@echo '#include "defs.h" /* For initialize_file_ftype. */' >>init.c-tmp
@echo 'extern void initialize_all_files(void);' >>init.c-tmp
@sed -e 's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp >>init.c-tmp
@echo 'void' >>init.c-tmp
@echo 'initialize_all_files (void)' >>init.c-tmp
@echo '{' >>init.c-tmp
@sed -e 's/\(.*\)/ _initialize_\1 ();/' <init.l-tmp >>init.c-tmp
@echo '}' >>init.c-tmp
@rm init.l-tmp
@mv init.c-tmp init.c
.PRECIOUS: init.c
# Create a library of the gdb object files and build GDB by linking
# against that.
#
# init.o is very important. It pulls in the rest of GDB.
LIBGDB_OBS= $(COMMON_OBS) $(TSOBS) $(ADD_FILES) init.o
libgdb.a: $(LIBGDB_OBS)
-rm -f libgdb.a
$(AR) q libgdb.a $(LIBGDB_OBS)
$(RANLIB) libgdb.a
# Removing the old gdb first works better if it is running, at least on SunOS.
gdb$(EXEEXT): gdb.o $(LIBGDB_OBS) $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
rm -f gdb$(EXEEXT)
$(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
-o gdb$(EXEEXT) gdb.o $(LIBGDB_OBS) \
$(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
# Convenience rule to handle recursion.
$(LIBGNU) $(GNULIB_H): all-lib
all-lib: $(GNULIB_BUILDDIR)/Makefile
@$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=$(GNULIB_BUILDDIR) subdir_do
.PHONY: all-lib
# Convenience rule to handle recursion.
.PHONY: all-data-directory
all-data-directory: data-directory/Makefile
@$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=data-directory subdir_do
# This is useful when debugging GDB, because some Unix's don't let you run GDB
# on itself without copying the executable. So "make gdb1" will make
# gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
# Removing gdb1 before the copy is the right thing if gdb1 is open
# in another process.
gdb1$(EXEEXT): gdb$(EXEEXT)
rm -f gdb1$(EXEEXT)
cp gdb$(EXEEXT) gdb1$(EXEEXT)
# Put the proper machine-specific files first, so M-. on a machine
# specific routine gets the one for the correct machine. (FIXME: those
# files go in twice; we should be removing them from the main list).
# TAGS depends on all the files that go into it so you can rebuild TAGS
# with `make TAGS' and not have to say `rm TAGS' first.
GDB_NM_FILE = @GDB_NM_FILE@
TAGS: $(TAGFILES_NO_SRCDIR) $(TAGFILES_WITH_SRCDIR)
@echo Making TAGS
etags `(test -n "$(GDB_NM_FILE)" && echo "$(srcdir)/$(GDB_NM_FILE)")` \
`(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
echo $(srcdir)/$$i ; \
done ; for i in $(TAGFILES_WITH_SRCDIR); do \
echo $$i ; \
done) | sed -e 's/\.o$$/\.c/'` \
`find $(srcdir)/config -name '*.h' -print`
tags: TAGS
clean mostlyclean: $(CONFIG_CLEAN)
@$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(CLEANDIRS)" subdir_do
rm -f *.o *.a $(ADD_FILES) *~ init.c-tmp init.l-tmp version.c-tmp
rm -f init.c version.c observer.h observer.inc
rm -f gdb$(EXEEXT) core make.log
rm -f gdb[0-9]$(EXEEXT)
rm -f test-cp-name-parser$(EXEEXT)
rm -f xml-builtin.c stamp-xml
rm -f $(DEPDIR)/*
# This used to depend on c-exp.c m2-exp.c TAGS
# I believe this is wrong; the makefile standards for distclean just
# describe removing files; the only sort of "re-create a distribution"
# functionality described is if the distributed files are unmodified.
# NB: While GDBSERVER might be configured on native systems, it isn't
# always included in SUBDIRS. Remove the gdbserver files explicitly.
distclean: clean
@$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(CLEANDIRS)" subdir_do
rm -rf $(GNULIB_BUILDDIR)
rm -f gdbserver/config.status gdbserver/config.log
rm -f gdbserver/tm.h gdbserver/xm.h gdbserver/nm.h
rm -f gdbserver/Makefile gdbserver/config.cache
rm -f nm.h config.status config.h stamp-h gdb-gdb.gdb jit-reader.h
rm -f y.output yacc.acts yacc.tmp y.tab.h
rm -f config.log config.cache
rm -f Makefile
rm -rf $(DEPDIR)
maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
realclean: maintainer-clean
local-maintainer-clean:
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
rm -f c-exp.c \
cp-name-parser.c \
ada-lex.c ada-exp.c \
d-exp.c f-exp.c go-exp.c m2-exp.c p-exp.c rust-exp.c
rm -f TAGS $(INFOFILES)
rm -f $(YYFILES)
rm -f nm.h config.status
do-maintainer-clean:
@$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(CLEANDIRS)" \
subdir_do
diststuff: $(DISTSTUFF) $(PACKAGE).pot $(CATALOGS)
cd doc; $(MAKE) $(MFLAGS) diststuff
subdir_do: force
@for i in $(DODIRS); do \
case $$i in \
$(REQUIRED_SUBDIRS)) \
if [ ! -f ./$$i/Makefile ] ; then \
echo "Missing $$i/Makefile" >&2 ; \
exit 1 ; \
fi ;; \
esac ; \
if [ -f ./$$i/Makefile ] ; then \
if (cd ./$$i; \
$(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
else exit 1 ; fi ; \
else true ; fi ; \
done
Makefile: Makefile.in config.status @frags@
# Regenerate the Makefile and the tm.h / nm.h links.
CONFIG_FILES="Makefile" \
CONFIG_COMMANDS= \
CONFIG_HEADERS= \
$(SHELL) config.status
$(GNULIB_BUILDDIR)/Makefile: gnulib/Makefile.in config.status @frags@
@cd $(GNULIB_BUILDDIR); CONFIG_FILES="Makefile" \
CONFIG_COMMANDS="depfiles" \
CONFIG_HEADERS= \
CONFIG_LINKS= \
$(SHELL) config.status
data-directory/Makefile: data-directory/Makefile.in config.status @frags@
CONFIG_FILES="data-directory/Makefile" \
CONFIG_COMMANDS="depfiles" \
CONFIG_HEADERS= \
CONFIG_LINKS= \
$(SHELL) config.status
.PHONY: run
run: Makefile
./gdb$(EXEEXT) --data-directory=`pwd`/data-directory $(GDBFLAGS)
jit-reader.h: $(srcdir)/jit-reader.in
$(SHELL) config.status $@
gcore: $(srcdir)/gcore.in
$(SHELL) config.status $@
config.h: stamp-h ; @true
stamp-h: $(srcdir)/config.in config.status
CONFIG_HEADERS=config.h:config.in \
CONFIG_COMMANDS="default depdir" \
CONFIG_FILES= \
CONFIG_LINKS= \
$(SHELL) config.status
config.status: $(srcdir)/configure configure.tgt configure.host ../bfd/development.sh
$(SHELL) config.status --recheck
ACLOCAL = aclocal
ACLOCAL_AMFLAGS = -I ../config
# Keep these in sync with the includes in acinclude.m4.
aclocal_m4_deps = \
configure.ac \
acx_configure_dir.m4 \
libmcheck.m4 \
transform.m4 \
../bfd/bfd.m4 \
../config/acinclude.m4 \
../config/plugins.m4 \
../config/lead-dot.m4 \
../config/override.m4 \
../config/largefile.m4 \
../config/gettext-sister.m4 \
../config/lib-ld.m4 \
../config/lib-prefix.m4 \
../config/lib-link.m4 \
../config/acx.m4 \
../config/tcl.m4 \
../config/depstand.m4 \
../config/lcmessage.m4 \
../config/codeset.m4 \
../config/zlib.m4
$(srcdir)/aclocal.m4: @MAINTAINER_MODE_TRUE@ $(aclocal_m4_deps)
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
AUTOCONF = autoconf
configure_deps = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
$(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(configure_deps)
cd $(srcdir) && $(AUTOCONF)
AUTOHEADER = autoheader
$(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(configure_deps)
cd $(srcdir) && $(AUTOHEADER)
rm -f stamp-h
touch $@
# automatic rebuilding in automake-generated Makefiles requires
# this rule in the toplevel Makefile, which, with GNU make, causes
# the desired updates through the implicit regeneration of the Makefile
# and all of its prerequisites.
am--refresh:
@:
force:
# Documentation!
# GDB QUICK REFERENCE (TeX dvi file, CM fonts)
doc/refcard.dvi:
cd doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS)
# GDB QUICK REFERENCE (PostScript output, common PS fonts)
doc/refcard.ps:
cd doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS)
# GDB MANUAL: TeX dvi file
doc/gdb.dvi:
cd doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS)
# GDB MANUAL: info file
doc/gdb.info:
cd doc; $(MAKE) gdb.info $(FLAGS_TO_PASS)
# Make copying.c from COPYING
$(srcdir)/copying.c: @MAINTAINER_MODE_TRUE@ $(srcdir)/../COPYING3 $(srcdir)/copying.awk
awk -f $(srcdir)/copying.awk \
< $(srcdir)/../COPYING3 > $(srcdir)/copying.tmp
mv $(srcdir)/copying.tmp $(srcdir)/copying.c
version.c: Makefile version.in $(srcdir)/../bfd/version.h $(srcdir)/common/create-version.sh
$(SHELL) $(srcdir)/common/create-version.sh $(srcdir) \
$(host_alias) $(target_alias) version.c
observer.h: observer.sh doc/observer.texi
${srcdir}/observer.sh h ${srcdir}/doc/observer.texi observer.h
observer.inc: observer.sh doc/observer.texi
${srcdir}/observer.sh inc ${srcdir}/doc/observer.texi observer.inc
lint: $(LINTFILES)
$(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
`echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
gdb.cxref: $(SFILES)
cxref -I. $(SFILES) >gdb.cxref
force_update:
# GNU Make has an annoying habit of putting *all* the Makefile variables
# into the environment, unless you include this target as a circumvention.
# Rumor is that this will be fixed (and this target can be removed)
# in GNU Make 4.0.
.NOEXPORT:
# GNU Make 3.63 has a different problem: it keeps tacking command line
# overrides onto the definition of $(MAKE). This variable setting
# will remove them.
MAKEOVERRIDES=
ALLDEPFILES = \
aarch64-tdep.c aarch64-linux-tdep.c aarch64-newlib-tdep.c \
aarch64-linux-nat.c \
aix-thread.c \
alphabsd-nat.c alpha-linux-nat.c \
alpha-tdep.c alpha-mdebug-tdep.c \
alpha-linux-tdep.c \
alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
arc-tdep.c \
amd64-nat.c amd64-tdep.c \
amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
amd64nbsd-nat.c amd64nbsd-tdep.c \
amd64obsd-nat.c amd64obsd-tdep.c \
amd64-darwin-tdep.c \
amd64-dicos-tdep.c \
amd64-linux-nat.c amd64-linux-tdep.c \
amd64-sol2-tdep.c \
arm.c arm-get-next-pcs.c \
arm-linux.c arm-linux-nat.c arm-linux-tdep.c \
arm-symbian-tdep.c arm-tdep.c \
armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
avr-tdep.c \
bfin-linux-tdep.c bfin-tdep.c \
bsd-uthread.c bsd-kvm.c \
core-regset.c \
dcache.c dicos-tdep.c darwin-nat.c \
exec.c \
fbsd-nat.c \
fbsd-tdep.c \
fork-child.c \
ft32-tdep.c \
glibc-tdep.c \
go32-nat.c h8300-tdep.c \
hppa-tdep.c \
hppa-linux-tdep.c hppa-linux-nat.c \
hppabsd-tdep.c \
hppanbsd-nat.c hppanbsd-tdep.c \
hppaobsd-nat.c hppaobsd-tdep.c \
i386-tdep.c i386-linux-nat.c \
i386v4-nat.c i386-cygwin-tdep.c \
i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
i387-tdep.c \
i386-darwin-tdep.c i386-darwin-nat.c \
i386-dicos-tdep.c \
i386-linux-tdep.c x86-nat.c \
i386-sol2-nat.c i386-sol2-tdep.c \
i386gnu-nat.c i386gnu-tdep.c \
ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c ia64-vms-tdep.c \
inf-ptrace.c \
ia64-libunwind-tdep.c \
linux-fork.c \
linux-tdep.c \
linux-record.c \
lm32-tdep.c \
m68hc11-tdep.c \
m32r-tdep.c \
m32r-linux-nat.c m32r-linux-tdep.c \
m68k-tdep.c \
m68kbsd-nat.c m68kbsd-tdep.c \
m68klinux-nat.c m68klinux-tdep.c \
m88k-tdep.c m88kbsd-nat.c \
microblaze-tdep.c microblaze-linux-tdep.c \
mingw-hdep.c common/mingw-strerror.c \
mips-linux-nat.c mips-linux-tdep.c \
mips-sde-tdep.c \
mips-tdep.c \
mipsnbsd-nat.c mipsnbsd-tdep.c \
mips64obsd-nat.c mips64obsd-tdep.c \
msp430-tdep.c \
nds32-tdep.c \
nios2-tdep.c nios2-linux-tdep.c \
nbsd-nat.c nbsd-tdep.c obsd-nat.c obsd-tdep.c \
posix-hdep.c common/posix-strerror.c \
ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c ppc64-tdep.c \
ppcfbsd-nat.c ppcfbsd-tdep.c \
ppcnbsd-nat.c ppcnbsd-tdep.c \
ppcobsd-nat.c ppcobsd-tdep.c \
procfs.c \
ravenscar-thread.c \
remote-sim.c \
dcache.c \
rl78-tdep.c \
rs6000-nat.c rs6000-tdep.c solib-aix.c ppc-ravenscar-thread.c \
rs6000-lynx178-tdep.c \
rx-tdep.c \
s390-linux-tdep.c s390-linux-nat.c \
score-tdep.c \
ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
sol2-tdep.c \
solib-svr4.c \
sparc-linux-nat.c sparc-linux-tdep.c \
sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \
sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \
sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
sparc64nbsd-nat.c sparc64nbsd-tdep.c \
sparc64obsd-nat.c sparc64obsd-tdep.c \
sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
sparc-ravenscar-thread.c \
spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \
tilegx-linux-nat.c tilegx-tdep.c tilegx-linux-tdep.c \
v850-tdep.c \
vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
windows-nat.c windows-tdep.c \
xcoffread.c \
xstormy16-tdep.c \
xtensa-tdep.c xtensa-config.c \
xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
# Some files need explicit build rules (due to -Werror problems) or due
# to sub-directory fun 'n' games.
# FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
# errors. It turns out that that is the least of monitor.c's
# problems. The function print_vsprintf appears to be using
# va_arg(long) to extract CORE_ADDR parameters - something that
# definitly will not work. "monitor.c" needs to be rewritten so that
# it doesn't use format strings and instead uses callbacks.
monitor.o: $(srcdir)/monitor.c
$(COMPILE.pre) $(INTERNAL_CFLAGS) $(GDB_WARN_CFLAGS_NO_FORMAT) \
$(COMPILE.post) $(srcdir)/monitor.c
$(POSTCOMPILE)
# Do not try to build "printcmd.c" with -Wformat-nonliteral. It manually
# checks format strings.
printcmd.o: $(srcdir)/printcmd.c
$(COMPILE.pre) $(INTERNAL_CFLAGS) $(GDB_WARN_CFLAGS_NO_FORMAT) \
$(COMPILE.post) $(srcdir)/printcmd.c
$(POSTCOMPILE)
# ada-exp.c can appear in srcdir, for releases; or in ., for
# development builds.
ADA_EXP_C = `if test -f ada-exp.c; then echo ada-exp.c; else echo $(srcdir)/ada-exp.c; fi`
# Some versions of flex give output that triggers
# -Wold-style-definition.
ada-exp.o: ada-exp.c
$(COMPILE.pre) $(INTERNAL_CFLAGS) $(GDB_WARN_CFLAGS_NO_DEFS) \
$(COMPILE.post) $(ADA_EXP_C)
$(POSTCOMPILE)
# Message files. Based on code in gcc/Makefile.in.
# Rules for generating translated message descriptions. Disabled by
# autoconf if the tools are not available.
.PHONY: all-po install-po uninstall-po clean-po update-po $(PACKAGE).pot
all-po: $(CATALOGS)
# This notation should be acceptable to all Make implementations used
# by people who are interested in updating .po files.
update-po: $(CATALOGS:.gmo=.pox)
# N.B. We do not attempt to copy these into $(srcdir). The snapshot
# script does that.
%.gmo: %.po
-test -d po || mkdir po
$(GMSGFMT) --statistics -o $@ $<
# The new .po has to be gone over by hand, so we deposit it into
# build/po with a different extension. If build/po/$(PACKAGE).pot
# exists, use it (it was just created), else use the one in srcdir.
%.pox: %.po
-test -d po || mkdir po
$(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \
then echo po/$(PACKAGE).pot; \
else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o $@
# This rule has to look for .gmo modules in both srcdir and the cwd,
# and has to check that we actually have a catalog for each language,
# in case they weren't built or included with the distribution.
install-po:
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(datadir)
cats="$(CATALOGS)"; for cat in $$cats; do \
lang=`basename $$cat | sed 's/\.gmo$$//'`; \
if [ -f $$cat ]; then :; \
elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
else continue; \
fi; \
dir=$(localedir)/$$lang/LC_MESSAGES; \
echo $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir; \
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir || exit 1; \
echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
$(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
done
uninstall-po:
cats="$(CATALOGS)"; for cat in $$cats; do \
lang=`basename $$cat | sed 's/\.gmo$$//'`; \
if [ -f $$cat ]; then :; \
elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
else continue; \
fi; \
dir=$(localedir)/$$lang/LC_MESSAGES; \
rm -f $(DESTDIR)$$dir/$(PACKAGE).mo; \
done
# Delete po/*.gmo only if we are not building in the source directory.
clean-po:
-if [ ! -f Makefile.in ]; then rm -f po/*.gmo; fi
# Rule for regenerating the message template (gdb.pot). Instead of
# forcing everyone to edit POTFILES.in, which proved impractical, this
# rule has no dependencies and always regenerates gdb.pot. This is
# relatively harmless since the .po files do not directly depend on
# it. The .pot file is left in the build directory. Since GDB's
# Makefile lacks a cannonical list of sources (missing xm, tm and nm
# files) force this rule.
$(PACKAGE).pot: po/$(PACKAGE).pot
po/$(PACKAGE).pot: force
-test -d po || mkdir po
sh -e $(srcdir)/po/gdbtext $(XGETTEXT) $(PACKAGE) . $(srcdir)
#
# YACC/LEX dependencies
#
# LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
# exist in srcdir, then compiled in objdir to LANG-exp.o. If we
# said LANG-exp.c rather than ./c-exp.c some makes would
# sometimes re-write it into $(srcdir)/c-exp.c. Remove bogus
# decls for malloc/realloc/free which conflict with everything else.
# Strictly speaking c-exp.c should therefore depend on
# Makefile.in, but that was a pretty big annoyance.
%.c: %.y
rm -f $@ $@.tmp
$(SHELL) $(YLWRAP) $< y.tab.c $@ -- $(YACC) $(YFLAGS) && mv $@ $@.tmp \
|| (rm -f $@; false)
sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
-e '/include.*malloc.h/d' \
-e 's/\([^x]\)malloc/\1xmalloc/g' \
-e 's/\([^x]\)realloc/\1xrealloc/g' \
-e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
-e 's/\([ \t;,(]\)free$$/\1xfree/g' \
-e '/^#line.*y.tab.c/d' \
-e 's/YY_NULL/YY_NULLPTR/g' \
< $@.tmp > $@
rm -f $@.tmp
%.c: %.l
if [ "$(FLEX)" ] && $(FLEX) --version >/dev/null 2>&1; then \
$(FLEX) -o$@ $< && \
rm -f $@.new && \
sed -e '/extern.*malloc/d' \
-e '/extern.*realloc/d' \
-e '/extern.*free/d' \
-e '/include.*malloc.h/d' \
-e 's/\([^x]\)malloc/\1xmalloc/g' \
-e 's/\([^x]\)realloc/\1xrealloc/g' \
-e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
-e 's/\([ \t;,(]\)free$$/\1xfree/g' \
-e 's/yy_flex_xrealloc/yyxrealloc/g' \
< $@ > $@.new && \
rm -f $@ && \
mv $@.new $@; \
elif [ -f $@ ]; then \
echo "Warning: $*.c older than $*.l and flex not available."; \
else \
echo "$@ missing and flex not available."; \
false; \
fi
.PRECIOUS: ada-lex.c
# XML rules
xml-builtin.c: stamp-xml; @true
stamp-xml: $(srcdir)/features/feature_to_c.sh Makefile $(XMLFILES)
rm -f xml-builtin.tmp
AWK="$(AWK)" \
$(SHELL) $(srcdir)/features/feature_to_c.sh \
xml-builtin.tmp $(XMLFILES)
$(SHELL) $(srcdir)/../move-if-change xml-builtin.tmp xml-builtin.c
echo stamp > stamp-xml
.PRECIOUS: xml-builtin.c
#
# GDBTK sub-directory
#
all-gdbtk: insight$(EXEEXT)
install-gdbtk:
transformed_name=`t='$(program_transform_name)'; \
echo insight | sed -e $$t` ; \
if test "x$$transformed_name" = x; then \
transformed_name=insight ; \
else \
true ; \
fi ; \
$(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir); \
$(INSTALL_PROGRAM) insight$(EXEEXT) \
$(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
$(SHELL) $(srcdir)/../mkinstalldirs \
$(DESTDIR)$(GDBTK_LIBRARY) ; \
$(SHELL) $(srcdir)/../mkinstalldirs \
$(DESTDIR)$(libdir)/insight$(GDBTK_VERSION) ; \
$(INSTALL_DATA) $(srcdir)/gdbtk/plugins/plugins.tcl \
$(DESTDIR)$(libdir)/insight$(GDBTK_VERSION)/plugins.tcl ; \
$(SHELL) $(srcdir)/../mkinstalldirs \
$(DESTDIR)$(GDBTK_LIBRARY)/images \
$(DESTDIR)$(GDBTK_LIBRARY)/images2 ; \
$(SHELL) $(srcdir)/../mkinstalldirs \
$(DESTDIR)$(GDBTK_LIBRARY)/help \
$(DESTDIR)$(GDBTK_LIBRARY)/help/images \
$(DESTDIR)$(GDBTK_LIBRARY)/help/trace ; \
cd $(srcdir)/gdbtk/library ; \
for i in *.tcl *.itcl *.ith *.itb images/*.gif images2/*.gif images/icons.txt images2/icons.txt tclIndex help/*.html help/trace/*.html help/trace/index.toc help/images/*.gif help/images/*.png; \
do \
$(INSTALL_DATA) $$i $(DESTDIR)$(GDBTK_LIBRARY)/$$i ; \
done ;
uninstall-gdbtk:
transformed_name=`t='$(program_transform_name)'; \
echo insight | sed -e $$t` ; \
if test "x$$transformed_name" = x; then \
transformed_name=insight ; \
else \
true ; \
fi ; \
rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
rm -rf $(DESTDIR)$(GDBTK_LIBRARY)
clean-gdbtk:
rm -f insight$(EXEEXT)
# Removing the old gdb first works better if it is running, at least on SunOS.
insight$(EXEEXT): gdbtk-main.o libgdb.a $(ADD_DEPS) \
$(CDEPS) $(TDEPLIBS)
rm -f insight$(EXEEXT)
$(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
-o insight$(EXEEXT) gdbtk-main.o libgdb.a \
$(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
gdbres.o: $(srcdir)/gdbtk/gdb.rc $(srcdir)/gdbtk/gdbtool.ico
$(WINDRES) --include $(srcdir)/gdbtk $(srcdir)/gdbtk/gdb.rc gdbres.o
all_gdbtk_cflags = $(IDE_CFLAGS) $(ITCL_CFLAGS) \
$(ITK_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
$(GDBTK_CFLAGS) \
-DGDBTK_LIBRARY=\"$(GDBTK_LIBRARY)\" \
-DSRC_DIR=\"$(GDBTK_SRC_DIR)\"
#
# Dependency tracking.
#
ifeq ($(DEPMODE),depmode=gcc3)
# Note that we put the dependencies into a .Tpo file, then move them
# into place if the compile succeeds. We need this because gcc does
# not atomically write the dependency output file.
override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
-MF $(DEPDIR)/$(basename $(@F)).Tpo
override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
$(DEPDIR)/$(basename $(@F)).Po
else
override COMPILE.pre = source='$<' object='$@' libtool=no \
DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
# depcomp handles atomicity for us, so we don't need a postcompile
# step.
override POSTCOMPILE =
endif
# A list of all the objects we might care about in this build, for
# dependency tracking.
all_object_files = gdb.o $(LIBGDB_OBS) gdbtk-main.o \
test-cp-name-parser.o
# Ensure that generated files are created early. Use order-only
# dependencies if available. They require GNU make 3.80 or newer,
# and the .VARIABLES variable was introduced at the same time.
ifdef .VARIABLES
$(all_object_files): | $(generated_files)
else
$(all_object_files) : $(generated_files)
endif
# Dependencies.
-include $(patsubst %.o, $(DEPDIR)/%.Po, $(all_object_files))
### end of the gdb Makefile.in.