binutils-gdb/gdb/ia64-hpux-nat.c
Yao Qi 9b409511d0 Return target_xfer_status in to_xfer_partial
This patch does the conversion of to_xfer_partial from

    LONGEST (*to_xfer_partial) (struct target_ops *ops,
				enum target_object object, const char *annex,
				gdb_byte *readbuf, const gdb_byte *writebuf,
				ULONGEST offset, ULONGEST len);

to

    enum target_xfer_status (*to_xfer_partial) (struct target_ops *ops,
				enum target_object object, const char *annex,
				gdb_byte *readbuf, const gdb_byte *writebuf,
				ULONGEST offset, ULONGEST len, ULONGEST *xfered_len);

It changes to_xfer_partial return the transfer status and the transfered
length by *XFERED_LEN.  Generally, the return status has three stats,

 - TARGET_XFER_OK,
 - TARGET_XFER_EOF,
 - TARGET_XFER_E_XXXX,

See the comments to them in 'enum target_xfer_status'.  Note that
Pedro suggested not name TARGET_XFER_DONE, as it is confusing,
compared with "TARGET_XFER_OK".  We finally name it TARGET_XFER_EOF.

With this change, GDB core can handle unavailable data in a convenient
way.

The rationale behind this change was mentioned here
https://sourceware.org/ml/gdb-patches/2013-10/msg00761.html

Consider an object/value like this:

  0          100      150        200           512
  DDDDDDDDDDDxxxxxxxxxDDDDDD...DDIIIIIIIIIIII..III

where D is valid data, and xxx is unavailable data, and I is beyond
the end of the object (Invalid).  Currently, if we start the
xfer at 0, requesting, say 512 bytes, we'll first get back 100 bytes.
The xfer machinery then retries fetching [100,512), and gets back
TARGET_XFER_E_UNAVAILABLE.  That's sufficient when you're either
interested in either having the whole of the 512 bytes available,
or erroring out.  But, in this scenario, we're interested in
the data at [150,512).  The problem is that the last
TARGET_XFER_E_UNAVAILABLE gives us no indication where to
start the read next.  We'd need something like:

get me [0,512) >>>
     <<< here's [0,100), *xfered_len is 100, returns TARGET_XFER_OK

get me [100,512)  >>> (**1)
     <<< [100,150) is unavailable, *xfered_len is 50, return TARGET_XFER_E_UNAVAILABLE.

get me [150,512) >>>
     <<< here's [150,200), *xfered_len is 50, return TARGET_XFER_OK.

get me [200,512) >>>
     <<< no more data, return TARGET_XFER_EOF.

This naturally implies pushing down the decision of whether
to return TARGET_XFER_E_UNAVAILABLE or something else
down to the target.  (Which kinds of leads back to tfile
itself reading from RO memory from file (though we could
export a function in exec.c for that that tfile delegates to,
instead of re-adding the old code).

Beside this change, we also add a macro TARGET_XFER_STATUS_ERROR_P to
check whether a status is an error or not, to stop using "status < 0".
This patch also eliminates the comparison between status and 0.

No target implementations to to_xfer_partial adapts this new
interface.  The interface still behaves as before.

gdb:

2014-02-11  Yao Qi  <yao@codesourcery.com>

	* target.h (enum target_xfer_error): Rename to ...
	(enum target_xfer_status): ... it.  New.  All users updated.
	(enum target_xfer_status) <TARGET_XFER_OK>, <TARGET_XFER_EOF>:
	New.
	(TARGET_XFER_STATUS_ERROR_P): New macro.
	(target_xfer_error_to_string): Remove declaration.
	(target_xfer_status_to_string): Declare.
	(target_xfer_partial_ftype): Adjust it.
	(struct target_ops) <to_xfer_partial>: Return
	target_xfer_status.  Add argument xfered_len.  Update
	comments.
	* target.c (target_xfer_error_to_string): Rename to ...
	(target_xfer_status_to_string): ... it.  New.  All callers
	updated.
	(target_read_live_memory): Likewise.  Call target_xfer_partial
	instead of target_read.
	(memory_xfer_live_readonly_partial): Return
	target_xfer_status.  Add argument xfered_len.
	(raw_memory_xfer_partial): Likewise.
	(memory_xfer_partial_1): Likewise.
	(memory_xfer_partial): Likewise.
	(target_xfer_partial): Likewise.  Check *XFERED_LEN is set
	properly.  Update debug message.
	(default_xfer_partial, current_xfer_partial): Likewise.
	(target_write_partial): Likewise.
	(target_read_partial): Likewise.  All callers updated.
	(read_whatever_is_readable): Likewise.
	(target_write_with_progress): Likewise.
	(target_read_alloc_1): Likewise.

	* aix-thread.c (aix_thread_xfer_partial): Likewise.
	* auxv.c (procfs_xfer_auxv): Likewise.
	(ld_so_xfer_auxv, memory_xfer_auxv): Likewise.
	* bfd-target.c (target_bfd_xfer_partial): Likewise.
	* bsd-kvm.c (bsd_kvm_xfer_partial): Likewise.
	* bsd-uthread.c (bsd_uthread_xfer_partia): Likewise.
	* corefile.c (read_memory): Adjust.
	* corelow.c (core_xfer_partial): Likewise.
	* ctf.c (ctf_xfer_partial): Likewise.
	* darwin-nat.c (darwin_read_dyld_info): Likewise.  All callers
	updated.
	(darwin_xfer_partial): Likewise.
	* exec.c (section_table_xfer_memory_partial): Likewise.  All
	callers updated.
	(exec_xfer_partial): Likewise.
	* exec.h (section_table_xfer_memory_partial): Update
	declaration.
	* gnu-nat.c (gnu_xfer_memory): Likewise.  Assert 'res' is not
	negative.
	(gnu_xfer_partial): Likewise.
	* ia64-hpux-nat.c (ia64_hpux_xfer_memory_no_bs): Likewise.
	(ia64_hpux_xfer_memory, ia64_hpux_xfer_uregs): Likewise.
	(ia64_hpux_xfer_solib_got): Likewise.
	* inf-ptrace.c (inf_ptrace_xfer_partial): Likewise.  Change
	type of 'partial_len' to ULONGEST.
	* inf-ttrace.c (inf_ttrace_xfer_partial): Likewise.
	* linux-nat.c (linux_xfer_siginfo ): Likewise.
	(linux_nat_xfer_partial): Likewise.
	(linux_proc_xfer_partial, linux_xfer_partial): Likewise.
	(linux_proc_xfer_spu, linux_nat_xfer_osdata): Likewise.
	* monitor.c (monitor_xfer_memory): Likewise.
	(monitor_xfer_partial): Likewise.
	* procfs.c (procfs_xfer_partial): Likewise.
	* record-btrace.c (record_btrace_xfer_partial): Likewise.
	* record-full.c (record_full_xfer_partial): Likewise.
	(record_full_core_xfer_partial): Likewise.
	* remote-sim.c (gdbsim_xfer_memory): Likewise.
	(gdbsim_xfer_partial): Likewise.
	* remote.c (remote_write_bytes_aux): Likewise.  All callers
	updated.
	(remote_write_bytes, remote_read_bytes): Likewise.  All
	callers updated.
	(remote_flash_erase): Likewise.  All callers updated.
	(remote_write_qxfer): Likewise.  All callers updated.
	(remote_read_qxfer): Likewise.  All callers updated.
	(remote_xfer_partial): Likewise.
	* rs6000-nat.c (rs6000_xfer_partial): Likewise.
	(rs6000_xfer_shared_libraries): Likewise.
	* sol-thread.c (sol_thread_xfer_partial): Likewise.
	(sol_thread_xfer_partial): Likewise.
	* sparc-nat.c (sparc_xfer_wcookie): Likewise.
	(sparc_xfer_partial): Likewise.
	* spu-linux-nat.c (spu_proc_xfer_spu): Likewise.  All callers
	updated.
	(spu_xfer_partial): Likewise.
	* spu-multiarch.c (spu_xfer_partial): Likewise.
	* tracepoint.c (tfile_xfer_partial): Likewise.
	* windows-nat.c (windows_xfer_memory): Likewise.
	(windows_xfer_shared_libraries): Likewise.
	(windows_xfer_partial): Likewise.
	* valprint.c: Replace 'target_xfer_error' with
	'target_xfer_status' in comments.
2014-02-11 14:20:33 +08:00

756 lines
24 KiB
C

/* Copyright (C) 2010-2014 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "ia64-tdep.h"
#include "inferior.h"
#include "inf-ttrace.h"
#include "regcache.h"
#include "solib-ia64-hpux.h"
#include <ia64/sys/uregs.h>
#include <sys/ttrace.h>
/* The offsets used with ttrace to read the value of the raw registers. */
static int u_offsets[] =
{ /* Static General Registers. */
-1, __r1, __r2, __r3, __r4, __r5, __r6, __r7,
__r8, __r9, __r10, __r11, __r12, __r13, __r14, __r15,
__r16, __r17, __r18, __r19, __r20, __r21, __r22, __r23,
__r24, __r25, __r26, __r27, __r28, __r29, __r30, __r31,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
/* Static Floating-Point Registers. */
-1, -1, __f2, __f3, __f4, __f5, __f6, __f7,
__f8, __f9, __f10, __f11, __f12, __f13, __f14, __f15,
__f16, __f17, __f18, __f19, __f20, __f21, __f22, __f23,
__f24, __f25, __f26, __f27, __f28, __f29, __f30, __f31,
__f32, __f33, __f34, __f35, __f36, __f37, __f38, __f39,
__f40, __f41, __f42, __f43, __f44, __f45, __f46, __f47,
__f48, __f49, __f50, __f51, __f52, __f53, __f54, __f55,
__f56, __f57, __f58, __f59, __f60, __f61, __f62, __f63,
__f64, __f65, __f66, __f67, __f68, __f69, __f70, __f71,
__f72, __f73, __f74, __f75, __f76, __f77, __f78, __f79,
__f80, __f81, __f82, __f83, __f84, __f85, __f86, __f87,
__f88, __f89, __f90, __f91, __f92, __f93, __f94, __f95,
__f96, __f97, __f98, __f99, __f100, __f101, __f102, __f103,
__f104, __f105, __f106, __f107, __f108, __f109, __f110, __f111,
__f112, __f113, __f114, __f115, __f116, __f117, __f118, __f119,
__f120, __f121, __f122, __f123, __f124, __f125, __f126, __f127,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
/* Branch Registers. */
__b0, __b1, __b2, __b3, __b4, __b5, __b6, __b7,
/* Virtual frame pointer and virtual return address pointer. */
-1, -1,
/* Other registers. */
__pr, __ip, __cr_ipsr, __cfm,
/* Kernel registers. */
-1, -1, -1, -1,
-1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
/* Some application registers. */
__ar_rsc, __ar_bsp, __ar_bspstore, __ar_rnat,
-1,
-1, /* Not available: FCR, IA32 floating control register. */
-1, -1,
-1, /* Not available: EFLAG. */
-1, /* Not available: CSD. */
-1, /* Not available: SSD. */
-1, /* Not available: CFLG. */
-1, /* Not available: FSR. */
-1, /* Not available: FIR. */
-1, /* Not available: FDR. */
-1,
__ar_ccv, -1, -1, -1, __ar_unat, -1, -1, -1,
__ar_fpsr, -1, -1, -1,
-1, /* Not available: ITC. */
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1, -1,
__ar_pfs, __ar_lc, __ar_ec,
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
-1
/* All following registers, starting with nat0, are handled as
pseudo registers, and hence are handled separately. */
};
/* Some register have a fixed value and can not be modified.
Store their value in static constant buffers that can be used
later to fill the register cache. */
static const char r0_value[8] = {0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00};
static const char f0_value[16] = {0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00};
static const char f1_value[16] = {0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0xff, 0xff,
0x80, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00};
/* The "to_wait" routine from the "inf-ttrace" layer. */
static ptid_t (*super_to_wait) (struct target_ops *, ptid_t,
struct target_waitstatus *, int);
/* The "to_wait" target_ops routine routine for ia64-hpux. */
static ptid_t
ia64_hpux_wait (struct target_ops *ops, ptid_t ptid,
struct target_waitstatus *ourstatus, int options)
{
ptid_t new_ptid;
new_ptid = super_to_wait (ops, ptid, ourstatus, options);
/* If this is a DLD event (hard-coded breakpoint instruction
that was activated by the solib-ia64-hpux module), we need to
process it, and then resume the execution as if the event did
not happen. */
if (ourstatus->kind == TARGET_WAITKIND_STOPPED
&& ourstatus->value.sig == GDB_SIGNAL_TRAP
&& ia64_hpux_at_dld_breakpoint_p (new_ptid))
{
ia64_hpux_handle_dld_breakpoint (new_ptid);
target_resume (new_ptid, 0, GDB_SIGNAL_0);
ourstatus->kind = TARGET_WAITKIND_IGNORE;
}
return new_ptid;
}
/* Fetch the RNAT register and supply it to the REGCACHE. */
static void
ia64_hpux_fetch_rnat_register (struct regcache *regcache)
{
CORE_ADDR addr;
gdb_byte buf[8];
int status;
/* The value of RNAT is stored at bsp|0x1f8, and must be read using
TT_LWP_RDRSEBS. */
regcache_raw_read_unsigned (regcache, IA64_BSP_REGNUM, &addr);
addr |= 0x1f8;
status = ttrace (TT_LWP_RDRSEBS, ptid_get_pid (inferior_ptid),
ptid_get_lwp (inferior_ptid), addr, sizeof (buf),
(uintptr_t) buf);
if (status < 0)
error (_("failed to read RNAT register at %s"),
paddress (get_regcache_arch(regcache), addr));
regcache_raw_supply (regcache, IA64_RNAT_REGNUM, buf);
}
/* Read the value of the register saved at OFFSET in the save_state_t
structure, and store its value in BUF. LEN is the size of the register
to be read. */
static int
ia64_hpux_read_register_from_save_state_t (int offset, gdb_byte *buf, int len)
{
int status;
status = ttrace (TT_LWP_RUREGS, ptid_get_pid (inferior_ptid),
ptid_get_lwp (inferior_ptid), offset, len, (uintptr_t) buf);
return status;
}
/* Fetch register REGNUM from the inferior. */
static void
ia64_hpux_fetch_register (struct regcache *regcache, int regnum)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
int offset, len, status;
gdb_byte *buf;
if (regnum == IA64_GR0_REGNUM)
{
/* r0 is always 0. */
regcache_raw_supply (regcache, regnum, r0_value);
return;
}
if (regnum == IA64_FR0_REGNUM)
{
/* f0 is always 0.0. */
regcache_raw_supply (regcache, regnum, f0_value);
return;
}
if (regnum == IA64_FR1_REGNUM)
{
/* f1 is always 1.0. */
regcache_raw_supply (regcache, regnum, f1_value);
return;
}
if (regnum == IA64_RNAT_REGNUM)
{
ia64_hpux_fetch_rnat_register (regcache);
return;
}
/* Get the register location. If the register can not be fetched,
then return now. */
offset = u_offsets[regnum];
if (offset == -1)
return;
len = register_size (gdbarch, regnum);
buf = alloca (len * sizeof (gdb_byte));
status = ia64_hpux_read_register_from_save_state_t (offset, buf, len);
if (status < 0)
warning (_("Failed to read register value for %s."),
gdbarch_register_name (gdbarch, regnum));
regcache_raw_supply (regcache, regnum, buf);
}
/* The "to_fetch_registers" target_ops routine for ia64-hpux. */
static void
ia64_hpux_fetch_registers (struct target_ops *ops,
struct regcache *regcache, int regnum)
{
if (regnum == -1)
for (regnum = 0;
regnum < gdbarch_num_regs (get_regcache_arch (regcache));
regnum++)
ia64_hpux_fetch_register (regcache, regnum);
else
ia64_hpux_fetch_register (regcache, regnum);
}
/* Save register REGNUM (stored in BUF) in the save_state_t structure.
LEN is the size of the register in bytes.
Return the value from the corresponding ttrace call (a negative value
means that the operation failed). */
static int
ia64_hpux_write_register_to_saved_state_t (int offset, gdb_byte *buf, int len)
{
return ttrace (TT_LWP_WUREGS, ptid_get_pid (inferior_ptid),
ptid_get_lwp (inferior_ptid), offset, len, (uintptr_t) buf);
}
/* Store register REGNUM into the inferior. */
static void
ia64_hpux_store_register (const struct regcache *regcache, int regnum)
{
struct gdbarch *gdbarch = get_regcache_arch (regcache);
int offset = u_offsets[regnum];
gdb_byte *buf;
int len, status;
/* If the register can not be stored, then return now. */
if (offset == -1)
return;
/* I don't know how to store that register for now. So just ignore any
request to store it, to avoid an internal error. */
if (regnum == IA64_PSR_REGNUM)
return;
len = register_size (gdbarch, regnum);
buf = alloca (len * sizeof (gdb_byte));
regcache_raw_collect (regcache, regnum, buf);
status = ia64_hpux_write_register_to_saved_state_t (offset, buf, len);
if (status < 0)
error (_("failed to write register value for %s."),
gdbarch_register_name (gdbarch, regnum));
}
/* The "to_store_registers" target_ops routine for ia64-hpux. */
static void
ia64_hpux_store_registers (struct target_ops *ops,
struct regcache *regcache, int regnum)
{
if (regnum == -1)
for (regnum = 0;
regnum < gdbarch_num_regs (get_regcache_arch (regcache));
regnum++)
ia64_hpux_store_register (regcache, regnum);
else
ia64_hpux_store_register (regcache, regnum);
}
/* The "xfer_partial" routine from the "inf-ttrace" target layer.
Ideally, we would like to use this routine for all transfer
requests, but this platforms has a lot of special cases that
need to be handled manually. So we override this routine and
delegate back if we detect that we are not in a special case. */
static target_xfer_partial_ftype *super_xfer_partial;
/* The "xfer_partial" routine for a memory region that is completely
outside of the backing-store region. */
static enum target_xfer_status
ia64_hpux_xfer_memory_no_bs (struct target_ops *ops, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
CORE_ADDR addr, LONGEST len,
ULONGEST *xfered_len)
{
/* Memory writes need to be aligned on 16byte boundaries, at least
when writing in the text section. On the other hand, the size
of the buffer does not need to be a multiple of 16bytes.
No such restriction when performing memory reads. */
if (writebuf && addr & 0x0f)
{
const CORE_ADDR aligned_addr = addr & ~0x0f;
const int aligned_len = len + (addr - aligned_addr);
gdb_byte *aligned_buf = alloca (aligned_len * sizeof (gdb_byte));
LONGEST status;
/* Read the portion of memory between ALIGNED_ADDR and ADDR, so
that we can write it back during our aligned memory write. */
status = super_xfer_partial (ops, TARGET_OBJECT_MEMORY, annex,
aligned_buf /* read */,
NULL /* write */,
aligned_addr, addr - aligned_addr);
if (status <= 0)
return TARGET_XFER_EOF;
memcpy (aligned_buf + (addr - aligned_addr), writebuf, len);
return super_xfer_partial (ops, TARGET_OBJECT_MEMORY, annex,
NULL /* read */, aligned_buf /* write */,
aligned_addr, aligned_len, xfered_len);
}
else
/* Memory read or properly aligned memory write. */
return super_xfer_partial (ops, TARGET_OBJECT_MEMORY, annex, readbuf,
writebuf, addr, len, xfered_len);
}
/* Read LEN bytes at ADDR from memory, and store it in BUF. This memory
region is assumed to be inside the backing store.
Return zero if the operation failed. */
static int
ia64_hpux_read_memory_bs (gdb_byte *buf, CORE_ADDR addr, int len)
{
gdb_byte tmp_buf[8];
CORE_ADDR tmp_addr = addr & ~0x7;
while (tmp_addr < addr + len)
{
int status;
int skip_lo = 0;
int skip_hi = 0;
status = ttrace (TT_LWP_RDRSEBS, ptid_get_pid (inferior_ptid),
ptid_get_lwp (inferior_ptid), tmp_addr,
sizeof (tmp_buf), (uintptr_t) tmp_buf);
if (status < 0)
return 0;
if (tmp_addr < addr)
skip_lo = addr - tmp_addr;
if (tmp_addr + sizeof (tmp_buf) > addr + len)
skip_hi = (tmp_addr + sizeof (tmp_buf)) - (addr + len);
memcpy (buf + (tmp_addr + skip_lo - addr),
tmp_buf + skip_lo,
sizeof (tmp_buf) - skip_lo - skip_hi);
tmp_addr += sizeof (tmp_buf);
}
return 1;
}
/* Write LEN bytes from BUF in memory at ADDR. This memory region is assumed
to be inside the backing store.
Return zero if the operation failed. */
static int
ia64_hpux_write_memory_bs (const gdb_byte *buf, CORE_ADDR addr, int len)
{
gdb_byte tmp_buf[8];
CORE_ADDR tmp_addr = addr & ~0x7;
while (tmp_addr < addr + len)
{
int status;
int lo = 0;
int hi = 7;
if (tmp_addr < addr || tmp_addr + sizeof (tmp_buf) > addr + len)
/* Part of the 8byte region pointed by tmp_addr needs to be preserved.
So read it in before we copy the data that needs to be changed. */
if (!ia64_hpux_read_memory_bs (tmp_buf, tmp_addr, sizeof (tmp_buf)))
return 0;
if (tmp_addr < addr)
lo = addr - tmp_addr;
if (tmp_addr + sizeof (tmp_buf) > addr + len)
hi = addr - tmp_addr + len - 1;
memcpy (tmp_buf + lo, buf + tmp_addr - addr + lo, hi - lo + 1);
status = ttrace (TT_LWP_WRRSEBS, ptid_get_pid (inferior_ptid),
ptid_get_lwp (inferior_ptid), tmp_addr,
sizeof (tmp_buf), (uintptr_t) tmp_buf);
if (status < 0)
return 0;
tmp_addr += sizeof (tmp_buf);
}
return 1;
}
/* The "xfer_partial" routine for a memory region that is completely
inside of the backing-store region. */
static LONGEST
ia64_hpux_xfer_memory_bs (struct target_ops *ops, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
CORE_ADDR addr, LONGEST len)
{
int success;
if (readbuf)
success = ia64_hpux_read_memory_bs (readbuf, addr, len);
else
success = ia64_hpux_write_memory_bs (writebuf, addr, len);
if (success)
return len;
else
return 0;
}
/* Get a register value as a unsigned value directly from the system,
instead of going through the regcache.
This function is meant to be used when inferior_ptid is not
a thread/process known to GDB. */
static ULONGEST
ia64_hpux_get_register_from_save_state_t (int regnum, int reg_size)
{
gdb_byte *buf = alloca (reg_size);
int offset = u_offsets[regnum];
int status;
/* The register is assumed to be available for fetching. */
gdb_assert (offset != -1);
status = ia64_hpux_read_register_from_save_state_t (offset, buf, reg_size);
if (status < 0)
{
/* This really should not happen. If it does, emit a warning
and pretend the register value is zero. Not exactly the best
error recovery mechanism, but better than nothing. We will
try to do better if we can demonstrate that this can happen
under normal circumstances. */
warning (_("Failed to read value of register number %d."), regnum);
return 0;
}
return extract_unsigned_integer (buf, reg_size, BFD_ENDIAN_BIG);
}
/* The "xfer_partial" target_ops routine for ia64-hpux, in the case
where the requested object is TARGET_OBJECT_MEMORY. */
static enum target_xfer_status
ia64_hpux_xfer_memory (struct target_ops *ops, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
CORE_ADDR addr, ULONGEST len, ULONGEST *xfered_len)
{
CORE_ADDR bsp, bspstore;
CORE_ADDR start_addr, short_len;
int status = 0;
/* The back-store region cannot be read/written by the standard memory
read/write operations. So we handle the memory region piecemeal:
(1) and (2) The regions before and after the backing-store region,
which can be treated as normal memory;
(3) The region inside the backing-store, which needs to be
read/written specially. */
if (in_inferior_list (ptid_get_pid (inferior_ptid)))
{
struct regcache *regcache = get_current_regcache ();
regcache_raw_read_unsigned (regcache, IA64_BSP_REGNUM, &bsp);
regcache_raw_read_unsigned (regcache, IA64_BSPSTORE_REGNUM, &bspstore);
}
else
{
/* This is probably a child of our inferior created by a fork.
Because this process has not been added to our inferior list
(we are probably in the process of handling that child
process), we do not have a regcache to read the registers
from. So get those values directly from the kernel. */
bsp = ia64_hpux_get_register_from_save_state_t (IA64_BSP_REGNUM, 8);
bspstore =
ia64_hpux_get_register_from_save_state_t (IA64_BSPSTORE_REGNUM, 8);
}
/* 1. Memory region before BSPSTORE. */
if (addr < bspstore)
{
short_len = len;
if (addr + len > bspstore)
short_len = bspstore - addr;
status = ia64_hpux_xfer_memory_no_bs (ops, annex, readbuf, writebuf,
addr, short_len);
if (status <= 0)
return TARGET_XFER_EOF;
}
/* 2. Memory region after BSP. */
if (addr + len > bsp)
{
start_addr = addr;
if (start_addr < bsp)
start_addr = bsp;
short_len = len + addr - start_addr;
status = ia64_hpux_xfer_memory_no_bs
(ops, annex,
readbuf ? readbuf + (start_addr - addr) : NULL,
writebuf ? writebuf + (start_addr - addr) : NULL,
start_addr, short_len);
if (status <= 0)
return TARGET_XFER_EOF;
}
/* 3. Memory region between BSPSTORE and BSP. */
if (bspstore != bsp
&& ((addr < bspstore && addr + len > bspstore)
|| (addr + len <= bsp && addr + len > bsp)))
{
start_addr = addr;
if (addr < bspstore)
start_addr = bspstore;
short_len = len + addr - start_addr;
if (start_addr + short_len > bsp)
short_len = bsp - start_addr;
gdb_assert (short_len > 0);
status = ia64_hpux_xfer_memory_bs
(ops, annex,
readbuf ? readbuf + (start_addr - addr) : NULL,
writebuf ? writebuf + (start_addr - addr) : NULL,
start_addr, short_len);
if (status < 0)
return TARGET_XFER_EOF;
}
*xfered_len = len;
return TARGET_XFER_OK;
}
/* Handle the transfer of TARGET_OBJECT_HPUX_UREGS objects on ia64-hpux.
ANNEX is currently ignored.
The current implementation does not support write transfers (because
we do not currently do not need these transfers), and will raise
a failed assertion if WRITEBUF is not NULL. */
static enum target_xfer_status
ia64_hpux_xfer_uregs (struct target_ops *ops, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len, ULONGEST *xfered_len)
{
int status;
gdb_assert (writebuf == NULL);
status = ia64_hpux_read_register_from_save_state_t (offset, readbuf, len);
if (status < 0)
return TARGET_XFER_E_IO;
*xfered_len = (ULONGEST) len;
return TARGET_XFER_OK;
}
/* Handle the transfer of TARGET_OBJECT_HPUX_SOLIB_GOT objects on ia64-hpux.
The current implementation does not support write transfers (because
we do not currently do not need these transfers), and will raise
a failed assertion if WRITEBUF is not NULL. */
static enum target_xfer_status
ia64_hpux_xfer_solib_got (struct target_ops *ops, const char *annex,
gdb_byte *readbuf, const gdb_byte *writebuf,
ULONGEST offset, ULONGEST len, ULONGEST *xfered_len)
{
CORE_ADDR fun_addr;
/* The linkage pointer. We use a uint64_t to make sure that the size
of the object we are returning is always 64 bits long, as explained
in the description of the TARGET_OBJECT_HPUX_SOLIB_GOT object.
This is probably paranoia, but we do not use a CORE_ADDR because
it could conceivably be larger than uint64_t. */
uint64_t got;
gdb_assert (writebuf == NULL);
if (offset > sizeof (got))
return TARGET_XFER_EOF;
fun_addr = string_to_core_addr (annex);
got = ia64_hpux_get_solib_linkage_addr (fun_addr);
if (len > sizeof (got) - offset)
len = sizeof (got) - offset;
memcpy (readbuf, &got + offset, len);
*xfered_len = (ULONGEST) len;
return TARGET_XFER_OK;
}
/* The "to_xfer_partial" target_ops routine for ia64-hpux. */
static enum target_xfer_status
ia64_hpux_xfer_partial (struct target_ops *ops, enum target_object object,
const char *annex, gdb_byte *readbuf,
const gdb_byte *writebuf, ULONGEST offset, ULONGEST len,
ULONGEST *xfered_len)
{
enum target_xfer_status val;
if (object == TARGET_OBJECT_MEMORY)
val = ia64_hpux_xfer_memory (ops, annex, readbuf, writebuf, offset, len,
xfered_len);
else if (object == TARGET_OBJECT_HPUX_UREGS)
val = ia64_hpux_xfer_uregs (ops, annex, readbuf, writebuf, offset, len,
xfered_len);
else if (object == TARGET_OBJECT_HPUX_SOLIB_GOT)
val = ia64_hpux_xfer_solib_got (ops, annex, readbuf, writebuf, offset,
len, xfered_len);
else
val = super_xfer_partial (ops, object, annex, readbuf, writebuf, offset,
len, xfered_len);
return val;
}
/* The "to_can_use_hw_breakpoint" target_ops routine for ia64-hpux. */
static int
ia64_hpux_can_use_hw_breakpoint (int type, int cnt, int othertype)
{
/* No hardware watchpoint/breakpoint support yet. */
return 0;
}
/* The "to_mourn_inferior" routine from the "inf-ttrace" target_ops layer. */
static void (*super_mourn_inferior) (struct target_ops *);
/* The "to_mourn_inferior" target_ops routine for ia64-hpux. */
static void
ia64_hpux_mourn_inferior (struct target_ops *ops)
{
const int pid = ptid_get_pid (inferior_ptid);
int status;
super_mourn_inferior (ops);
/* On this platform, the process still exists even after we received
an exit event. Detaching from the process isn't sufficient either,
as it only turns the process into a zombie. So the only solution
we found is to kill it. */
ttrace (TT_PROC_EXIT, pid, 0, 0, 0, 0);
wait (&status);
}
/* Prevent warning from -Wmissing-prototypes. */
void _initialize_ia64_hpux_nat (void);
void
_initialize_ia64_hpux_nat (void)
{
struct target_ops *t;
t = inf_ttrace_target ();
super_to_wait = t->to_wait;
super_xfer_partial = t->to_xfer_partial;
super_mourn_inferior = t->to_mourn_inferior;
t->to_wait = ia64_hpux_wait;
t->to_fetch_registers = ia64_hpux_fetch_registers;
t->to_store_registers = ia64_hpux_store_registers;
t->to_xfer_partial = ia64_hpux_xfer_partial;
t->to_can_use_hw_breakpoint = ia64_hpux_can_use_hw_breakpoint;
t->to_mourn_inferior = ia64_hpux_mourn_inferior;
t->to_attach_no_wait = 1;
add_target (t);
}