binutils-gdb/sim/common/aclocal.m4

# This file contains common code used by all simulators.
#
# SIM_AC_COMMON invokes AC macros used by all simulators and by the common
# directory.  It is intended to be invoked before any target specific stuff.
# SIM_AC_OUTPUT is a cover function to AC_OUTPUT to generate the Makefile.
# It is intended to be invoked last.
#
# The simulator's configure.in should look like:
#
# dnl Process this file with autoconf to produce a configure script.
# sinclude(../common/aclocal.m4)
# AC_PREREQ(2.5)dnl
# AC_INIT(Makefile.in)
#
# SIM_AC_COMMON
#
# ... target specific stuff ...
#
# SIM_AC_OUTPUT

AC_DEFUN(SIM_AC_COMMON,
[
# autoconf.info says this should be called right after AC_INIT.
AC_CONFIG_HEADER(ifelse([$1],,config.h,[$1]):config.in)
AC_CANONICAL_SYSTEM
AC_ARG_PROGRAM
AC_PROG_CC
AC_PROG_INSTALL

# Put a plausible default for CC_FOR_BUILD in Makefile.
if test "x$cross_compiling" = "xno"; then
  CC_FOR_BUILD='$(CC)'
else
  CC_FOR_BUILD=gcc
fi
AC_SUBST(CC_FOR_BUILD)

AC_SUBST(CFLAGS)
AC_SUBST(HDEFINES)
AR=${AR-ar}
AC_SUBST(AR)
AC_PROG_RANLIB

dnl We don't use gettext, but bfd does.  So we do the appropriate checks
dnl to see if there are intl libraries we should link against.
ALL_LINGUAS=
CY_GNU_GETTEXT

# Check for common headers.
# FIXME: Seems to me this can cause problems for i386-windows hosts.
# At one point there were hardcoded AC_DEFINE's if ${host} = i386-*-windows*.
AC_CHECK_HEADERS(stdlib.h string.h strings.h unistd.h time.h)
AC_CHECK_HEADERS(sys/time.h sys/resource.h)
AC_CHECK_HEADERS(fcntl.h fpu_control.h)
AC_CHECK_HEADERS(dlfcn.h errno.h sys/stat.h)
AC_CHECK_FUNCS(getrusage time sigaction __setfpucw)

# Check for socket libraries
AC_CHECK_LIB(socket, bind)
AC_CHECK_LIB(nsl, gethostbyname)

. ${srcdir}/../../bfd/configure.host

dnl Standard (and optional) simulator options.
dnl Eventually all simulators will support these.
dnl Do not add any here that cannot be supported by all simulators.
dnl Do not add similar but different options to a particular simulator,
dnl all shall eventually behave the same way.


dnl We don't use automake, but we still want to support
dnl --enable-maintainer-mode.
USE_MAINTAINER_MODE=no
AC_ARG_ENABLE(maintainer-mode,
[  --enable-maintainer-mode		Enable developer functionality.],
[case "${enableval}" in
  yes)	MAINT="" USE_MAINTAINER_MODE=yes ;;
  no)	MAINT="#" ;;
  *)	AC_MSG_ERROR("--enable-maintainer-mode does not take a value"); MAINT="#" ;;
esac
if test x"$silent" != x"yes" && test x"$MAINT" = x""; then
  echo "Setting maintainer mode" 6>&1
fi],[MAINT="#"])dnl
AC_SUBST(MAINT)


dnl This is a generic option to enable special byte swapping
dnl insns on *any* cpu.
AC_ARG_ENABLE(sim-bswap,
[  --enable-sim-bswap			Use Host specific BSWAP instruction.],
[case "${enableval}" in
  yes)	sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
  no)	sim_bswap="-DWITH_BSWAP=0";;
  *)	AC_MSG_ERROR("--enable-sim-bswap does not take a value"); sim_bswap="";;
esac
if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
  echo "Setting bswap flags = $sim_bswap" 6>&1
fi],[sim_bswap=""])dnl
AC_SUBST(sim_bswap)


AC_ARG_ENABLE(sim-cflags,
[  --enable-sim-cflags=opts		Extra CFLAGS for use in building simulator],
[case "${enableval}" in
  yes)	 sim_cflags="-O2 -fomit-frame-pointer";;
  trace) AC_MSG_ERROR("Please use --enable-sim-debug instead."); sim_cflags="";;
  no)	 sim_cflags="";;
  *)	 sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac
if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then
  echo "Setting sim cflags = $sim_cflags" 6>&1
fi],[sim_cflags=""])dnl
AC_SUBST(sim_cflags)


dnl --enable-sim-debug is for developers of the simulator
dnl the allowable values are work-in-progress
AC_ARG_ENABLE(sim-debug,
[  --enable-sim-debug=opts		Enable debugging flags],
[case "${enableval}" in
  yes) sim_debug="-DDEBUG=7 -DWITH_DEBUG=7";;
  no)  sim_debug="-DDEBUG=0 -DWITH_DEBUG=0";;
  *)   sim_debug="-DDEBUG='(${enableval})' -DWITH_DEBUG='(${enableval})'";;
esac
if test x"$silent" != x"yes" && test x"$sim_debug" != x""; then
  echo "Setting sim debug = $sim_debug" 6>&1
fi],[sim_debug=""])dnl
AC_SUBST(sim_debug)


dnl --enable-sim-stdio is for users of the simulator
dnl It determines if IO from the program is routed through STDIO (buffered)
AC_ARG_ENABLE(sim-stdio,
[  --enable-sim-stdio			Specify whether to use stdio for console input/output.],
[case "${enableval}" in
  yes)	sim_stdio="-DWITH_STDIO=DO_USE_STDIO";;
  no)	sim_stdio="-DWITH_STDIO=DONT_USE_STDIO";;
  *)	AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-stdio"); sim_stdio="";;
esac
if test x"$silent" != x"yes" && test x"$sim_stdio" != x""; then
  echo "Setting stdio flags = $sim_stdio" 6>&1
fi],[sim_stdio=""])dnl
AC_SUBST(sim_stdio)


dnl --enable-sim-trace is for users of the simulator
dnl The argument is either a bitmask of things to enable [exactly what is
dnl up to the simulator], or is a comma separated list of names of tracing
dnl elements to enable.  The latter is only supported on simulators that
dnl use WITH_TRACE.
AC_ARG_ENABLE(sim-trace,
[  --enable-sim-trace=opts		Enable tracing flags],
[case "${enableval}" in
  yes)	sim_trace="-DTRACE=1 -DWITH_TRACE=-1";;
  no)	sim_trace="-DTRACE=0 -DWITH_TRACE=0";;
  [[-0-9]]*)
	sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
  [[a-z]]*)
	sim_trace=""
	for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
	  if test x"$sim_trace" = x; then
	    sim_trace="-DWITH_TRACE='(TRACE_$x"
	  else
	    sim_trace="${sim_trace}|TRACE_$x"
	  fi
	done
	sim_trace="$sim_trace)'" ;;
esac
if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
  echo "Setting sim trace = $sim_trace" 6>&1
fi],[sim_trace=""])dnl
AC_SUBST(sim_trace)


dnl --enable-sim-profile
dnl The argument is either a bitmask of things to enable [exactly what is
dnl up to the simulator], or is a comma separated list of names of profiling
dnl elements to enable.  The latter is only supported on simulators that
dnl use WITH_PROFILE.
AC_ARG_ENABLE(sim-profile,
[  --enable-sim-profile=opts		Enable profiling flags],
[case "${enableval}" in
  yes)	sim_profile="-DPROFILE=1 -DWITH_PROFILE=-1";;
  no)	sim_profile="-DPROFILE=0 -DWITH_PROFILE=0";;
  [[-0-9]]*)
	sim_profile="-DPROFILE='(${enableval})' -DWITH_PROFILE='(${enableval})'";;
  [[a-z]]*)
	sim_profile=""
	for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
	  if test x"$sim_profile" = x; then
	    sim_profile="-DWITH_PROFILE='(PROFILE_$x"
	  else
	    sim_profile="${sim_profile}|PROFILE_$x"
	  fi
	done
	sim_profile="$sim_profile)'" ;;
esac
if test x"$silent" != x"yes" && test x"$sim_profile" != x""; then
  echo "Setting sim profile = $sim_profile" 6>&1
fi],[sim_profile="-DPROFILE=1 -DWITH_PROFILE=-1"])dnl
AC_SUBST(sim_profile)


dnl Types used by common code
AC_TYPE_SIGNAL

dnl Detect exe extension
AC_EXEEXT

dnl These are available to append to as desired.
sim_link_files=
sim_link_links=

dnl Create tconfig.h either from simulator's tconfig.in or default one
dnl in common.
sim_link_links=tconfig.h
if test -f ${srcdir}/tconfig.in
then
  sim_link_files=tconfig.in
else
  sim_link_files=../common/tconfig.in
fi

# targ-vals.def points to the libc macro description file.
case "${target}" in
*-*-*) TARG_VALS_DEF=../common/nltvals.def ;;
esac
sim_link_files="${sim_link_files} ${TARG_VALS_DEF}"
sim_link_links="${sim_link_links} targ-vals.def"

]) dnl End of SIM_AC_COMMON


dnl Additional SIM options that can (optionally) be configured
dnl For optional simulator options, a macro SIM_AC_OPTION_* is defined.
dnl Simulators that wish to use the relevant option specify the macro
dnl in the simulator specific configure.in file between the SIM_AC_COMMON
dnl and SIM_AC_OUTPUT lines.


dnl Specify the running environment.
dnl If the simulator invokes this in its configure.in then without this option
dnl the default is the user environment and all are runtime selectable.
dnl If the simulator doesn't invoke this, only the user environment is
dnl supported.
dnl ??? Until there is demonstrable value in doing something more complicated,
dnl let's not.
AC_DEFUN(SIM_AC_OPTION_ENVIRONMENT,
[
AC_ARG_ENABLE(sim-environment,
[  --enable-sim-environment=environment	Specify mixed, user, virtual or operating environment.],
[case "${enableval}" in
  all | ALL)             sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT";;
  user | USER)           sim_environment="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
  virtual | VIRTUAL)     sim_environment="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
  operating | OPERATING) sim_environment="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
  *)   AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-environment");
       sim_environment="";;
esac
if test x"$silent" != x"yes" && test x"$sim_environment" != x""; then
  echo "Setting sim environment = $sim_environment" 6>&1
fi],
[sim_environment="-DWITH_ENVIRONMENT=ALL_ENVIRONMENT"])dnl
])
AC_SUBST(sim_environment)


dnl Specify the alignment restrictions of the target architecture.
dnl Without this option all possible alignment restrictions are accommodated.
dnl arg[1] is hardwired target alignment
dnl arg[2] is default target alignment
AC_DEFUN(SIM_AC_OPTION_ALIGNMENT,
wire_alignment="[$1]"
default_alignment="[$2]"
[
AC_ARG_ENABLE(sim-alignment,
[  --enable-sim-alignment=align		Specify strict,  nonstrict or forced alignment of memory accesses.],
[case "${enableval}" in
  strict | STRICT)       sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;
  nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;
  forced | FORCED)       sim_alignment="-DWITH_ALIGNMENT=FORCED_ALIGNMENT";;
  yes) if test x"$wire_alignment" != x; then
	 sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"
       else
         if test x"$default_alignment" != x; then
           sim_alignment="-DWITH_ALIGNMENT=${default_alignment}"
         else
	   echo "No hard-wired alignment for target $target" 1>&6
	   sim_alignment="-DWITH_ALIGNMENT=0"
         fi
       fi;;
  no)  if test x"$default_alignment" != x; then
	 sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"
       else
         if test x"$wire_alignment" != x; then
	   sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${wire_alignment}"
         else
           echo "No default alignment for target $target" 1>&6
           sim_alignment="-DWITH_DEFAULT_ALIGNMENT=0"
         fi
       fi;;
  *)   AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-alignment"); sim_alignment="";;
esac
if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then
  echo "Setting alignment flags = $sim_alignment" 6>&1
fi],
[if test x"$default_alignment" != x; then
  sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"
else
  if test x"$wire_alignment" != x; then
    sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"
  else
    sim_alignment=
  fi
fi])dnl
])dnl
AC_SUBST(sim_alignment)


dnl Conditionally compile in assertion statements.
AC_DEFUN(SIM_AC_OPTION_ASSERT,
[
AC_ARG_ENABLE(sim-assert,
[  --enable-sim-assert			Specify whether to perform random assertions.],
[case "${enableval}" in
  yes)	sim_assert="-DWITH_ASSERT=1";;
  no)	sim_assert="-DWITH_ASSERT=0";;
  *)	AC_MSG_ERROR("--enable-sim-assert does not take a value"); sim_assert="";;
esac
if test x"$silent" != x"yes" && test x"$sim_assert" != x""; then
  echo "Setting assert flags = $sim_assert" 6>&1
fi],[sim_assert=""])dnl
])
AC_SUBST(sim_assert)



dnl --enable-sim-bitsize is for developers of the simulator
dnl It specifies the number of BITS in the target.
dnl arg[1] is the number of bits in a word
dnl arg[2] is the number assigned to the most significant bit
dnl arg[3] is the number of bits in an address
dnl arg[4] is the number of bits in an OpenFirmware cell.
dnl FIXME: this information should be obtained from bfd/archure
AC_DEFUN(SIM_AC_OPTION_BITSIZE,
wire_word_bitsize="[$1]"
wire_word_msb="[$2]"
wire_address_bitsize="[$3]"
wire_cell_bitsize="[$4]"
[AC_ARG_ENABLE(sim-bitsize,
[  --enable-sim-bitsize=N		Specify target bitsize (32 or 64).],
[sim_bitsize=
case "${enableval}" in
  64,63 | 64,63,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63";;
  32,31 | 32,31,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31";;
  64,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
  32,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";;
  32) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then
        sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31"
      else
        sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0"
      fi ;;
  64) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then
        sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63"
      else
        sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=0"
      fi ;;
  *)  AC_MSG_ERROR("--enable-sim-bitsize was given $enableval.  Expected 32 or 64") ;;
esac
# address bitsize
tmp=`echo "${enableval}" | sed -e "s/^[[0-9]]*,*[[0-9]]*,*//"`
case x"${tmp}" in
  x ) ;;
  x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=32" ;;
  x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=64" ;;
  * ) AC_MSG_ERROR("--enable-sim-bitsize was given address size $enableval.  Expected 32 or 64") ;;
esac
# cell bitsize
tmp=`echo "${enableval}" | sed -e "s/^[[0-9]]*,*[[0-9*]]*,*[[0-9]]*,*//"`
case x"${tmp}" in
  x ) ;;
  x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=32" ;;
  x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=64" ;;
  * ) AC_MSG_ERROR("--enable-sim-bitsize was given cell size $enableval.  Expected 32 or 64") ;;
esac
if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then
  echo "Setting bitsize flags = $sim_bitsize" 6>&1
fi],
[sim_bitsize=""
if test x"$wire_word_bitsize" != x; then
  sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_BITSIZE=$wire_word_bitsize"
fi
if test x"$wire_word_msb" != x; then
  sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_MSB=$wire_word_msb"
fi
if test x"$wire_address_bitsize" != x; then
  sim_bitsize="$sim_bitsize -DWITH_TARGET_ADDRESS_BITSIZE=$wire_address_bitsize"
fi
if test x"$wire_cell_bitsize" != x; then
  sim_bitsize="$sim_bitsize -DWITH_TARGET_CELL_BITSIZE=$wire_cell_bitsize"
fi])dnl
])
AC_SUBST(sim_bitsize)



dnl --enable-sim-endian={yes,no,big,little} is for simulators
dnl that support both big and little endian targets.
dnl arg[1] is hardwired target endianness.
dnl arg[2] is default target endianness.
AC_DEFUN(SIM_AC_OPTION_ENDIAN,
[
wire_endian="[$1]"
default_endian="[$2]"
AC_ARG_ENABLE(sim-endian,
[  --enable-sim-endian=endian		Specify target byte endian orientation.],
[case "${enableval}" in
  b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
  l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
  yes)	 if test x"$wire_endian" != x; then
	   sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
	 else
           if test x"$default_endian" != x; then
	     sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}"
	   else
	     echo "No hard-wired endian for target $target" 1>&6
	     sim_endian="-DWITH_TARGET_BYTE_ORDER=0"
	   fi
	 fi;;
  no)	 if test x"$default_endian" != x; then
	   sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
	 else
	   if test x"$wire_endian" != x; then
	     sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}"
	   else
	     echo "No default endian for target $target" 1>&6
	     sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0"
	   fi
	 fi;;
  *)	 AC_MSG_ERROR("Unknown value $enableval for --enable-sim-endian"); sim_endian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
  echo "Setting endian flags = $sim_endian" 6>&1
fi],
[if test x"$default_endian" != x; then
  sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}"
else
  if test x"$wire_endian" != x; then
    sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}"
  else
    sim_endian=
  fi
fi])dnl
])
AC_SUBST(sim_endian)


dnl --enable-sim-hostendian is for users of the simulator when
dnl they find that AC_C_BIGENDIAN does not function correctly
dnl (for instance in a canadian cross)
AC_DEFUN(SIM_AC_OPTION_HOSTENDIAN,
[
AC_ARG_ENABLE(sim-hostendian,
[  --enable-sim-hostendian=end		Specify host byte endian orientation.],
[case "${enableval}" in
  no)	 sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
  b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
  l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
  *)	 AC_MSG_ERROR("Unknown value $enableval for --enable-sim-hostendian"); sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
  echo "Setting hostendian flags = $sim_hostendian" 6>&1
fi],[
if test "x$cross_compiling" = "xno"; then
  AC_C_BIGENDIAN
  if test $ac_cv_c_bigendian = yes; then
    sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
  else
    sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
  fi
else
  sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
fi])dnl
])
AC_SUBST(sim_hostendian)


dnl --enable-sim-float is for developers of the simulator
dnl It specifies the presence of hardware floating point
dnl And optionally the bitsize of the floating point register.
dnl arg[1] specifies the presence (or absence) of floating point hardware
dnl arg[2] specifies the number of bits in a floating point register
AC_DEFUN(SIM_AC_OPTION_FLOAT,
[
default_sim_float="[$1]"
default_sim_float_bitsize="[$2]"
AC_ARG_ENABLE(sim-float,
[  --enable-sim-float			Specify that the target processor has floating point hardware.],
[case "${enableval}" in
  yes | hard)	sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT";;
  no | soft)	sim_float="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";;
  32)           sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT -DWITH_TARGET_FLOATING_POINT_BITSIZE=32";;
  64)           sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT -DWITH_TARGET_FLOATING_POINT_BITSIZE=64";;
  *)		AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-float"); sim_float="";;
esac
if test x"$silent" != x"yes" && test x"$sim_float" != x""; then
  echo "Setting float flags = $sim_float" 6>&1
fi],[
sim_float=
if test x"${default_sim_float}" != x""; then
  sim_float="-DWITH_FLOATING_POINT=${default_sim_float}"
fi
if test x"${default_sim_float_bitsize}" != x""; then
  sim_float="$sim_float -DWITH_TARGET_FLOATING_POINT_BITSIZE=${default_sim_float_bitsize}"
fi
])dnl
])
AC_SUBST(sim_float)


dnl The argument is the default cache size if none is specified.
AC_DEFUN(SIM_AC_OPTION_SCACHE,
[
default_sim_scache="ifelse([$1],,0,[$1])"
AC_ARG_ENABLE(sim-scache,
[  --enable-sim-scache=size		Specify simulator execution cache size.],
[case "${enableval}" in
  yes)	sim_scache="-DWITH_SCACHE=${default_sim_scache}";;
  no)	sim_scache="-DWITH_SCACHE=0" ;;
  [[0-9]]*) sim_scache="-DWITH_SCACHE=${enableval}";;
  *)	AC_MSG_ERROR("Bad value $enableval passed to --enable-sim-scache");
	sim_scache="";;
esac
if test x"$silent" != x"yes" && test x"$sim_scache" != x""; then
  echo "Setting scache size = $sim_scache" 6>&1
fi],[sim_scache="-DWITH_SCACHE=${default_sim_scache}"])
])
AC_SUBST(sim_scache)


dnl The argument is the default model if none is specified.
AC_DEFUN(SIM_AC_OPTION_DEFAULT_MODEL,
[
default_sim_default_model="ifelse([$1],,0,[$1])"
AC_ARG_ENABLE(sim-default-model,
[  --enable-sim-default-model=model	Specify default model to simulate.],
[case "${enableval}" in
  yes|no) AC_MSG_ERROR("Missing argument to --enable-sim-default-model");;
  *)	sim_default_model="-DWITH_DEFAULT_MODEL='\"${enableval}\"'";;
esac
if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then
  echo "Setting default model = $sim_default_model" 6>&1
fi],[sim_default_model="-DWITH_DEFAULT_MODEL='\"${default_sim_default_model}\"'"])
])
AC_SUBST(sim_default_model)


dnl --enable-sim-hardware is for users of the simulator
dnl arg[1] Enable sim-hw by default? ("yes" or "no")
dnl arg[2] is a space separated list of devices that override the defaults
dnl arg[3] is a space separated list of extra target specific devices.
AC_DEFUN(SIM_AC_OPTION_HARDWARE,
[
if test x"[$1]" = x"yes"; then
  sim_hw_p=yes
else
  sim_hw_p=no
fi
if test "[$2]"; then
  hardware="core pal glue"
else
  hardware="core pal glue [$3]"
fi
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([[^ ]][[^ ]]*\)/dv-\1.o/g'`"
AC_ARG_ENABLE(sim-hardware,
[  --enable-sim-hardware=LIST		Specify the hardware to be included in the build.],
[
case "${enableval}" in
  yes)	sim_hw_p=yes;;
  no)	sim_hw_p=no;;
  ,*)   sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
  *,)   sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
  *)	sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
if test "$sim_hw_p" != yes; then
  sim_hw_objs=
  sim_hw_cflags="-DWITH_HW=0"
  sim_hw=
else
  sim_hw_cflags="-DWITH_HW=1"
  # remove duplicates
  sim_hw=""
  sim_hw_objs="\$(SIM_COMMON_HW_OBJS)"
  for i in x $hardware ; do
    case " $f " in
      x) ;;
      *" $i "*) ;;
      *) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";;
    esac
  done
fi
if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
  echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
fi],[
if test "$sim_hw_p" != yes; then
  sim_hw_objs=
  sim_hw_cflags="-DWITH_HW=0"
  sim_hw=
fi
if test x"$silent" != x"yes"; then
  echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
fi])dnl
])
AC_SUBST(sim_hw_cflags)
AC_SUBST(sim_hw_objs)
AC_SUBST(sim_hw)


dnl --enable-sim-inline is for users that wish to ramp up the simulator's
dnl performance by inlining functions.
dnl Guarantee that unconfigured simulators do not do any inlining
sim_inline="-DDEFAULT_INLINE=0"
AC_DEFUN(SIM_AC_OPTION_INLINE,
[
default_sim_inline="ifelse([$1],,,-DDEFAULT_INLINE=[$1])"
AC_ARG_ENABLE(sim-inline,
[  --enable-sim-inline=inlines		Specify which functions should be inlined.],
[sim_inline=""
case "$enableval" in
  no)		sim_inline="-DDEFAULT_INLINE=0";;
  0)		sim_inline="-DDEFAULT_INLINE=0";;
  yes | 2)	sim_inline="-DDEFAULT_INLINE=ALL_C_INLINE";;
  1)		sim_inline="-DDEFAULT_INLINE=INLINE_LOCALS";;
  *) for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
       new_flag=""
       case "$x" in
	 *_INLINE=*)	new_flag="-D$x";;
	 *=*)		new_flag=`echo "$x" | sed -e "s/=/_INLINE=/" -e "s/^/-D/"`;;
	 *_INLINE)	new_flag="-D$x=ALL_C_INLINE";;
	 *)		new_flag="-D$x""_INLINE=ALL_C_INLINE";;
       esac
       if test x"$sim_inline" = x""; then
	 sim_inline="$new_flag"
       else
	 sim_inline="$sim_inline $new_flag"
       fi
     done;;
esac
if test x"$silent" != x"yes" && test x"$sim_inline" != x""; then
  echo "Setting inline flags = $sim_inline" 6>&1
fi],[
if test "x$cross_compiling" = "xno"; then
  if test x"$GCC" != "x" -a x"${default_sim_inline}" != "x" ; then
    sim_inline="${default_sim_inline}"
    if test x"$silent" != x"yes"; then
      echo "Setting inline flags = $sim_inline" 6>&1
    fi
  else
    sim_inline=""
  fi
else
  sim_inline="-DDEFAULT_INLINE=0"
fi])dnl
])
AC_SUBST(sim_inline)


AC_DEFUN(SIM_AC_OPTION_PACKAGES,
[
AC_ARG_ENABLE(sim-packages,
[  --enable-sim-packages=list		Specify the packages to be included in the build.],
[packages=disklabel
case "${enableval}" in
  yes)	;;
  no)	AC_MSG_ERROR("List of packages must be specified for --enable-sim-packages"); packages="";;
  ,*)   packages="${packages}${enableval}";;
  *,)   packages="${enableval}${packages}";;
  *)	packages="${enableval}"'';;
esac
sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'`
sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'`
if test x"$silent" != x"yes" && test x"$packages" != x""; then
  echo "Setting packages to $sim_pk_src, $sim_pk_obj"
fi],[packages=disklabel
sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'`
sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'`
if test x"$silent" != x"yes"; then
  echo "Setting packages to $sim_pk_src, $sim_pk_obj"
fi])dnl
])
AC_SUBST(sim_packages)


AC_DEFUN(SIM_AC_OPTION_REGPARM,
[
AC_ARG_ENABLE(sim-regparm,
[  --enable-sim-regparm=nr-parm		Pass parameters in registers instead of on the stack - x86/GCC specific.],
[case "${enableval}" in
  0*|1*|2*|3*|4*|5*|6*|7*|8*|9*) sim_regparm="-DWITH_REGPARM=${enableval}";;
  no)                            sim_regparm="" ;;
  yes)                           sim_regparm="-DWITH_REGPARM=3";;
  *)   AC_MSG_ERROR("Unknown value $enableval for --enable-sim-regparm"); sim_regparm="";;
esac
if test x"$silent" != x"yes" && test x"$sim_regparm" != x""; then
  echo "Setting regparm flags = $sim_regparm" 6>&1
fi],[sim_regparm=""])dnl
])
AC_SUBST(sim_regparm)


AC_DEFUN(SIM_AC_OPTION_RESERVED_BITS,
[
default_sim_reserved_bits="ifelse([$1],,1,[$1])"
AC_ARG_ENABLE(sim-reserved-bits,
[  --enable-sim-reserved-bits		Specify whether to check reserved bits in instruction.],
[case "${enableval}" in
  yes)	sim_reserved_bits="-DWITH_RESERVED_BITS=1";;
  no)	sim_reserved_bits="-DWITH_RESERVED_BITS=0";;
  *)	AC_MSG_ERROR("--enable-sim-reserved-bits does not take a value"); sim_reserved_bits="";;
esac
if test x"$silent" != x"yes" && test x"$sim_reserved_bits" != x""; then
  echo "Setting reserved flags = $sim_reserved_bits" 6>&1
fi],[sim_reserved_bits="-DWITH_RESERVED_BITS=${default_sim_reserved_bits}"])dnl
])
AC_SUBST(sim_reserved_bits)


AC_DEFUN(SIM_AC_OPTION_SMP,
[
default_sim_smp="ifelse([$1],,5,[$1])"
AC_ARG_ENABLE(sim-smp,
[  --enable-sim-smp=n			Specify number of processors to configure for (default ${default_sim_smp}).],
[case "${enableval}" in
  yes)	sim_smp="-DWITH_SMP=5" ; sim_igen_smp="-N 5";;
  no)	sim_smp="-DWITH_SMP=0" ; sim_igen_smp="-N 0";;
  *)	sim_smp="-DWITH_SMP=$enableval" ; sim_igen_smp="-N $enableval";;
esac
if test x"$silent" != x"yes" && test x"$sim_smp" != x""; then
  echo "Setting smp flags = $sim_smp" 6>&1
fi],[sim_smp="-DWITH_SMP=${default_sim_smp}" ; sim_igen_smp="-N ${default_sim_smp}"
if test x"$silent" != x"yes"; then
  echo "Setting smp flags = $sim_smp" 6>&1
fi])dnl
])
AC_SUBST(sim_smp)


AC_DEFUN(SIM_AC_OPTION_STDCALL,
[
AC_ARG_ENABLE(sim-stdcall,
[  --enable-sim-stdcall=type		Use an alternative function call/return mechanism - x86/GCC specific.],
[case "${enableval}" in
  no)		sim_stdcall="" ;;
  std*)		sim_stdcall="-DWITH_STDCALL=1";;
  yes)		sim_stdcall="-DWITH_STDCALL=1";;
  *)   AC_MSG_ERROR("Unknown value $enableval for --enable-sim-stdcall"); sim_stdcall="";;
esac
if test x"$silent" != x"yes" && test x"$sim_stdcall" != x""; then
  echo "Setting function call flags = $sim_stdcall" 6>&1
fi],[sim_stdcall=""])dnl
])
AC_SUBST(sim_stdcall)


AC_DEFUN(SIM_AC_OPTION_XOR_ENDIAN,
[
default_sim_xor_endian="ifelse([$1],,8,[$1])"
AC_ARG_ENABLE(sim-xor-endian,
[  --enable-sim-xor-endian=n		Specify number bytes involved in XOR bi-endian mode (default ${default_sim_xor_endian}).],
[case "${enableval}" in
  yes)	sim_xor_endian="-DWITH_XOR_ENDIAN=8";;
  no)	sim_xor_endian="-DWITH_XOR_ENDIAN=0";;
  *)	sim_xor_endian="-DWITH_XOR_ENDIAN=$enableval";;
esac
if test x"$silent" != x"yes" && test x"$sim_xor_endian" != x""; then
  echo "Setting xor-endian flag = $sim_xor_endian" 6>&1
fi],[sim_xor_endian="-DWITH_XOR_ENDIAN=${default_sim_xor_endian}"])dnl
])
AC_SUBST(sim_xor_endian)


dnl --enable-build-warnings is for developers of the simulator.
dnl it enables extra GCC specific warnings.
AC_DEFUN(SIM_AC_OPTION_WARNINGS,
[
# NOTE: Don't add -Wall or -Wunused, they both include
# -Wunused-parameter which reports bogus warnings.
# NOTE: If you add to this list, remember to update
# gdb/doc/gdbint.texinfo.
build_warnings="-Wimplicit -Wreturn-type -Wcomment -Wtrigraphs \
-Wformat -Wparentheses -Wpointer-arith -Wuninitialized"
# Up for debate: -Wswitch -Wcomment -trigraphs -Wtrigraphs
# -Wunused-function -Wunused-label -Wunused-variable -Wunused-value
# -Wchar-subscripts -Wtraditional -Wshadow -Wcast-qual
# -Wcast-align -Wwrite-strings -Wconversion -Wstrict-prototypes
# -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls
# -Woverloaded-virtual -Winline -Werror"
AC_ARG_ENABLE(build-warnings,
[  --enable-build-warnings Enable build-time compiler warnings if gcc is used],
[case "${enableval}" in
  yes)	;;
  no)	build_warnings="-w";;
  ,*)   t=`echo "${enableval}" | sed -e "s/,/ /g"`
        build_warnings="${build_warnings} ${t}";;
  *,)   t=`echo "${enableval}" | sed -e "s/,/ /g"`
        build_warnings="${t} ${build_warnings}";;
  *)    build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac
if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
  echo "Setting compiler warning flags = $build_warnings" 6>&1
fi])dnl
AC_ARG_ENABLE(sim-build-warnings,
[  --enable-gdb-build-warnings Enable SIM specific build-time compiler warnings if gcc is used],
[case "${enableval}" in
  yes)	;;
  no)	build_warnings="-w";;
  ,*)   t=`echo "${enableval}" | sed -e "s/,/ /g"`
        build_warnings="${build_warnings} ${t}";;
  *,)   t=`echo "${enableval}" | sed -e "s/,/ /g"`
        build_warnings="${t} ${build_warnings}";;
  *)    build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac
if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
  echo "Setting GDB specific compiler warning flags = $build_warnings" 6>&1
fi])dnl
WARN_CFLAGS=""
WERROR_CFLAGS=""
if test "x${build_warnings}" != x -a "x$GCC" = xyes
then
    AC_MSG_CHECKING(compiler warning flags)
    # Separate out the -Werror flag as some files just cannot be
    # compiled with it enabled.
    for w in ${build_warnings}; do
	case $w in
	-Werr*) WERROR_CFLAGS=-Werror ;;
	*) # Check that GCC accepts it
	    saved_CFLAGS="$CFLAGS"
	    CFLAGS="$CFLAGS $w"
	    AC_TRY_COMPILE([],[],WARN_CFLAGS="${WARN_CFLAGS} $w",)
	    CFLAGS="$saved_CFLAGS"
	esac
    done
    AC_MSG_RESULT(${WARN_CFLAGS}${WERROR_CFLAGS})
fi
])
AC_SUBST(WARN_CFLAGS)
AC_SUBST(WERROR_CFLAGS)


dnl Generate the Makefile in a target specific directory.
dnl Substitutions aren't performed on the file in AC_SUBST_FILE,
dnl so this is a cover macro to tuck the details away of how we cope.
dnl We cope by having autoconf generate two files and then merge them into
dnl one afterwards.  The two pieces of the common fragment are inserted into
dnl the target's fragment at the appropriate points.

AC_DEFUN(SIM_AC_OUTPUT,
[
AC_LINK_FILES($sim_link_files, $sim_link_links)
dnl Make @cgen_breaks@ non-null only if the sim uses CGEN.
cgen_breaks=""
if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then
cgen_breaks="break cgen_rtx_error";
fi
AC_SUBST(cgen_breaks)
AC_OUTPUT(Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in,
[case "x$CONFIG_FILES" in
 xMakefile*)
   echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
   rm -f Makesim1.tmp Makesim2.tmp Makefile
   sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
   sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
   sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
	-e '/^## COMMON_POST_/ r Makesim2.tmp' \
	<Makefile.sim >Makefile
   rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
   ;;
 esac
 case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac
])
])

# This file is derived from `gettext.m4'.  The difference is that the
# included macros assume Cygnus-style source and build trees.

# Macro to add for using GNU gettext.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file file be copied and used freely without restrictions.  It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.

# serial 3

AC_DEFUN(CY_WITH_NLS,
  [AC_MSG_CHECKING([whether NLS is requested])
    dnl Default is enabled NLS
    AC_ARG_ENABLE(nls,
      [  --disable-nls           do not use Native Language Support],
      USE_NLS=$enableval, USE_NLS=yes)
    AC_MSG_RESULT($USE_NLS)
    AC_SUBST(USE_NLS)

    USE_INCLUDED_LIBINTL=no

    dnl If we use NLS figure out what method
    if test "$USE_NLS" = "yes"; then
      AC_DEFINE(ENABLE_NLS)
      AC_MSG_CHECKING([whether included gettext is requested])
      AC_ARG_WITH(included-gettext,
        [  --with-included-gettext use the GNU gettext library included here],
        nls_cv_force_use_gnu_gettext=$withval,
        nls_cv_force_use_gnu_gettext=no)
      AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)

      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
        dnl User does not insist on using GNU NLS library.  Figure out what
        dnl to use.  If gettext or catgets are available (in this order) we
        dnl use this.  Else we have to fall back to GNU NLS library.
	dnl catgets is only used if permitted by option --with-catgets.
	nls_cv_header_intl=
	nls_cv_header_libgt=
	CATOBJEXT=NONE

	AC_CHECK_HEADER(libintl.h,
	  [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
	    [AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
	       gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])

	   if test "$gt_cv_func_gettext_libc" != "yes"; then
	     AC_CHECK_LIB(intl, bindtextdomain,
	       [AC_CACHE_CHECK([for gettext in libintl],
		 gt_cv_func_gettext_libintl,
		 [AC_TRY_LINK([], [return (int) gettext ("")],
		 gt_cv_func_gettext_libintl=yes,
		 gt_cv_func_gettext_libintl=no)])])
	   fi

	   if test "$gt_cv_func_gettext_libc" = "yes" \
	      || test "$gt_cv_func_gettext_libintl" = "yes"; then
	      AC_DEFINE(HAVE_GETTEXT)
	      AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
		[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
	      if test "$MSGFMT" != "no"; then
		AC_CHECK_FUNCS(dcgettext)
		AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
		AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
		  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
		AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
			       return _nl_msg_cat_cntr],
		  [CATOBJEXT=.gmo
		   DATADIRNAME=share],
		  [CATOBJEXT=.mo
		   DATADIRNAME=lib])
		INSTOBJEXT=.mo
	      fi
	    fi
	])

	dnl In the standard gettext, we would now check for catgets.
        dnl However, we never want to use catgets for our releases.

        if test "$CATOBJEXT" = "NONE"; then
	  dnl Neither gettext nor catgets in included in the C library.
	  dnl Fall back on GNU gettext library.
	  nls_cv_use_gnu_gettext=yes
        fi
      fi

      if test "$nls_cv_use_gnu_gettext" = "yes"; then
        dnl Mark actions used to generate GNU NLS library.
        INTLOBJS="\$(GETTOBJS)"
        AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
        AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
        AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
        AC_SUBST(MSGFMT)
	USE_INCLUDED_LIBINTL=yes
        CATOBJEXT=.gmo
        INSTOBJEXT=.mo
        DATADIRNAME=share
	INTLDEPS='$(top_builddir)/../intl/libintl.a'
	INTLLIBS=$INTLDEPS
	LIBS=`echo $LIBS | sed -e 's/-lintl//'`
        nls_cv_header_intl=libintl.h
        nls_cv_header_libgt=libgettext.h
      fi

      dnl Test whether we really found GNU xgettext.
      if test "$XGETTEXT" != ":"; then
	dnl If it is no GNU xgettext we define it as : so that the
	dnl Makefiles still can work.
	if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
	  : ;
	else
	  AC_MSG_RESULT(
	    [found xgettext programs is not GNU xgettext; ignore it])
	  XGETTEXT=":"
	fi
      fi

      # We need to process the po/ directory.
      POSUB=po
    else
      DATADIRNAME=share
      nls_cv_header_intl=libintl.h
      nls_cv_header_libgt=libgettext.h
    fi

    # If this is used in GNU gettext we have to set USE_NLS to `yes'
    # because some of the sources are only built for this goal.
    if test "$PACKAGE" = gettext; then
      USE_NLS=yes
      USE_INCLUDED_LIBINTL=yes
    fi

    dnl These rules are solely for the distribution goal.  While doing this
    dnl we only have to keep exactly one list of the available catalogs
    dnl in configure.in.
    for lang in $ALL_LINGUAS; do
      GMOFILES="$GMOFILES $lang.gmo"
      POFILES="$POFILES $lang.po"
    done

    dnl Make all variables we use known to autoconf.
    AC_SUBST(USE_INCLUDED_LIBINTL)
    AC_SUBST(CATALOGS)
    AC_SUBST(CATOBJEXT)
    AC_SUBST(DATADIRNAME)
    AC_SUBST(GMOFILES)
    AC_SUBST(INSTOBJEXT)
    AC_SUBST(INTLDEPS)
    AC_SUBST(INTLLIBS)
    AC_SUBST(INTLOBJS)
    AC_SUBST(POFILES)
    AC_SUBST(POSUB)
  ])

AC_DEFUN(CY_GNU_GETTEXT,
  [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
   AC_REQUIRE([AC_PROG_CC])dnl
   AC_REQUIRE([AC_PROG_RANLIB])dnl
   AC_REQUIRE([AC_ISC_POSIX])dnl
   AC_REQUIRE([AC_HEADER_STDC])dnl
   AC_REQUIRE([AC_C_CONST])dnl
   AC_REQUIRE([AC_C_INLINE])dnl
   AC_REQUIRE([AC_TYPE_OFF_T])dnl
   AC_REQUIRE([AC_TYPE_SIZE_T])dnl
   AC_REQUIRE([AC_FUNC_ALLOCA])dnl
   AC_REQUIRE([AC_FUNC_MMAP])dnl

   AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
unistd.h values.h sys/param.h])
   AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
__argz_count __argz_stringify __argz_next])

   if test "${ac_cv_func_stpcpy+set}" != "set"; then
     AC_CHECK_FUNCS(stpcpy)
   fi
   if test "${ac_cv_func_stpcpy}" = "yes"; then
     AC_DEFINE(HAVE_STPCPY)
   fi

   AM_LC_MESSAGES
   CY_WITH_NLS

   if test "x$CATOBJEXT" != "x"; then
     if test "x$ALL_LINGUAS" = "x"; then
       LINGUAS=
     else
       AC_MSG_CHECKING(for catalogs to be installed)
       NEW_LINGUAS=
       for lang in ${LINGUAS=$ALL_LINGUAS}; do
         case "$ALL_LINGUAS" in
          *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
         esac
       done
       LINGUAS=$NEW_LINGUAS
       AC_MSG_RESULT($LINGUAS)
     fi

     dnl Construct list of names of catalog files to be constructed.
     if test -n "$LINGUAS"; then
       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
     fi
   fi

   dnl The reference to <locale.h> in the installed <libintl.h> file
   dnl must be resolved because we cannot expect the users of this
   dnl to define HAVE_LOCALE_H.
   if test $ac_cv_header_locale_h = yes; then
     INCLUDE_LOCALE_H="#include <locale.h>"
   else
     INCLUDE_LOCALE_H="\
/* The system does not provide the header <locale.h>.  Take care yourself.  */"
   fi
   AC_SUBST(INCLUDE_LOCALE_H)

   dnl Determine which catalog format we have (if any is needed)
   dnl For now we know about two different formats:
   dnl   Linux libc-5 and the normal X/Open format
   if test -f $srcdir/po2tbl.sed.in; then
      if test "$CATOBJEXT" = ".cat"; then
	 AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)

	 dnl Transform the SED scripts while copying because some dumb SEDs
         dnl cannot handle comments.
	 sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed
      fi
      dnl po2tbl.sed is always needed.
      sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
	 $srcdir/po2tbl.sed.in > po2tbl.sed
   fi

   dnl In the intl/Makefile.in we have a special dependency which makes
   dnl only sense for gettext.  We comment this out for non-gettext
   dnl packages.
   if test "$PACKAGE" = "gettext"; then
     GT_NO="#NO#"
     GT_YES=
   else
     GT_NO=
     GT_YES="#YES#"
   fi
   AC_SUBST(GT_NO)
   AC_SUBST(GT_YES)

   MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs"
   AC_SUBST(MKINSTALLDIRS)

   dnl *** For now the libtool support in intl/Makefile is not for real.
   l=
   AC_SUBST(l)

   dnl Generate list of files to be processed by xgettext which will
   dnl be included in po/Makefile.  But only do this if the po directory
   dnl exists in srcdir.
   if test -d $srcdir/po; then
      test -d po || mkdir po
      if test "x$srcdir" != "x."; then
	 if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
	    posrcprefix="$srcdir/"
	 else
	    posrcprefix="../$srcdir/"
	 fi
      else
	 posrcprefix="../"
      fi
      rm -f po/POTFILES
      sed -e "/^#/d" -e "/^\$/d" -e "s,.*,	$posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
	 < $srcdir/po/POTFILES.in > po/POTFILES
   fi
  ])

# Search path for a program which passes the given test.
# Ulrich Drepper <drepper@cygnus.com>, 1996.
#
# This file file be copied and used freely without restrictions.  It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.

# serial 1

dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
AC_DEFUN(AM_PATH_PROG_WITH_TEST,
[# Extract the first word of "$2", so it can be a program name with args.
set dummy $2; ac_word=[$]2
AC_MSG_CHECKING([for $ac_word])
AC_CACHE_VAL(ac_cv_path_$1,
[case "[$]$1" in
  /*)
  ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
  for ac_dir in ifelse([$5], , $PATH, [$5]); do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      if [$3]; then
	ac_cv_path_$1="$ac_dir/$ac_word"
	break
      fi
    fi
  done
  IFS="$ac_save_ifs"
dnl If no 4th arg is given, leave the cache variable unset,
dnl so AC_PATH_PROGS will keep looking.
ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
])dnl
  ;;
esac])dnl
$1="$ac_cv_path_$1"
if test -n "[$]$1"; then
  AC_MSG_RESULT([$]$1)
else
  AC_MSG_RESULT(no)
fi
AC_SUBST($1)dnl
])

# Check whether LC_MESSAGES is available in <locale.h>.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file file be copied and used freely without restrictions.  It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.

# serial 1

AC_DEFUN(AM_LC_MESSAGES,
  [if test $ac_cv_header_locale_h = yes; then
    AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
      [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
       am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
    if test $am_cv_val_LC_MESSAGES = yes; then
      AC_DEFINE(HAVE_LC_MESSAGES)
    fi
  fi])


dnl --enable-cgen-maint support
AC_DEFUN(SIM_AC_OPTION_CGEN_MAINT,
[
cgen_maint=no
dnl Default is to use one in build tree.
cgen=guile
cgendir='$(srcdir)/../../cgen'
dnl Having --enable-maintainer-mode take arguments is another way to go.
dnl ??? One can argue --with is more appropriate if one wants to specify
dnl a directory name, but what we're doing here is an enable/disable kind
dnl of thing and specifying both --enable and --with is klunky.
dnl If you reeely want this to be --with, go ahead and change it.
AC_ARG_ENABLE(cgen-maint,
[  --enable-cgen-maint[=DIR]    build cgen generated files],
[case "${enableval}" in
  yes)	cgen_maint=yes ;;
  no)	cgen_maint=no ;;
  *)
	# argument is cgen install directory (not implemented yet).
	# Having a `share' directory might be more appropriate for the .scm,
	# .cpu, etc. files.
	cgendir=${cgen_maint}/lib/cgen
	cgen=guile
	;;
esac])dnl
dnl AM_CONDITIONAL(CGEN_MAINT, test x${cgen_maint} != xno)
if test x${cgen_maint} != xno ; then
  CGEN_MAINT=''
else
  CGEN_MAINT='#'
fi
AC_SUBST(CGEN_MAINT)
AC_SUBST(cgendir)
AC_SUBST(cgen)
])
dnl FIXME: When upgrading to modern autoconf, remove
dnl        SIM_CHECK_MEMBER and SIM_CHECK_MEMBERS et al and use
dnl        AC_CHECK_MEMBERS from autoconf.
dnl
dnl Translated from a FC2 autoconf-2.59-3 installation.
dnl  AC_CHECK_MEMBER(AGGREGATE.MEMBER,
dnl                  [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND],
dnl                  [INCLUDES])
dnl
dnl  ---------------------------------------------------------
dnl  AGGREGATE.MEMBER is for instance `struct passwd.pw_gecos', shell
dnl  variables are not a valid argument.
AC_DEFUN([SIM_CHECK_MEMBER],
dnl Extract the aggregate name, and the member name
[AC_CACHE_CHECK([for $1], [ac_]patsubst([$1], [[\. ]], [_]),
[ac_]patsubst([$1], [[\. ]], [_])[=no;]
AC_TRY_COMPILE([$4],[
dnl AGGREGATE ac_aggr;
static ]patsubst([$1], [\..*])[ ac_aggr;
dnl ac_aggr.MEMBER;
if (ac_aggr.]patsubst([$1], [^[^.]*\.])[)
return 0;],[ac_]patsubst([$1], [[\. ]], [_])[=yes;],
AC_TRY_COMPILE([$4],[
dnl AGGREGATE ac_aggr;
static ]patsubst([$1], [\..*])[ ac_aggr;
dnl ac_aggr.MEMBER;
if (sizeof ac_aggr.]patsubst([$1], [^[^.]*\.])[)
return 0;],
[ac_]patsubst([$1], [[\. ]], [_])[=yes;],
[ac_]patsubst([$1], [[\. ]], [_])[=no;]))
[if test [$]ac_]patsubst([$1], [[\. ]], [_])[ = yes; then :; [$2]
else :; [$3]
fi])
])dnl SIM_CHECK_MEMBER
dnl
dnl Translated from a FC2 autoconf-2.59-3 installation.
dnl  SIM_CHECK_MEMBERS([AGGREGATE.MEMBER, ...])
dnl except we just work with a limited set of fixed includes.
dnl
AC_DEFUN([SIM_CHECK_MEMBERS_1],
[ifelse($#, 1,
[SIM_CHECK_MEMBER([$1],
AC_DEFINE_UNQUOTED([HAVE_]translit([$1], [a-z .], [A-Z__]), 1,
[Define to 1 if ]patsubst([$1],
[^[^.]*\.])[ is a member of ]patsubst([$1], [\..*])[. ]),,
[#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#ifdef HAVE_SYS_STAT_H
#include <sys/stat.h>
#endif])],
[SIM_CHECK_MEMBER([$1],
AC_DEFINE_UNQUOTED([HAVE_]translit([$1], [a-z .], [A-Z__]), 1,
[Define to 1 if ]patsubst([$1],
[^[^.]*\.])[ is a member of ]patsubst([$1], [\..*])[. ]),,
[#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
#endif
#ifdef HAVE_SYS_STAT_H
#include <sys/stat.h>
#endif])
SIM_CHECK_MEMBERS_1(builtin(shift,$@))])])dnl SIM_CHECK_MEMBERS
dnl
AC_DEFUN([SIM_CHECK_MEMBERS],
[ifelse($#, 1, [SIM_CHECK_MEMBERS_1($1)],
[errprint(__file__:__line__:
[This SIM_CHECK_MEMBERS only supports one argument,]
[the list of struct tests])])])dnl SIM_CHECK_MEMBERS