mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-21 04:42:53 +08:00
08106042d9
I built GDB for all targets on a x86-64/GNU-Linux system, and then (accidentally) passed GDB a RISC-V binary, and asked GDB to "run" the binary on the native target. I got this error: (gdb) show architecture The target architecture is set to "auto" (currently "i386"). (gdb) file /tmp/hello.rv32.exe Reading symbols from /tmp/hello.rv32.exe... (gdb) show architecture The target architecture is set to "auto" (currently "riscv:rv32"). (gdb) run Starting program: /tmp/hello.rv32.exe ../../src/gdb/i387-tdep.c:596: internal-error: i387_supply_fxsave: Assertion `tdep->st0_regnum >= I386_ST0_REGNUM' failed. What's going on here is this; initially the architecture is i386, this is based on the default architecture, which is set based on the native target. After loading the RISC-V executable the architecture of the current inferior is updated based on the architecture of the executable. When we "run", GDB does a fork & exec, with the inferior being controlled through ptrace. GDB sees an initial stop from the inferior as soon as the inferior comes to life. In response to this stop GDB ends up calling save_stop_reason (linux-nat.c), which ends up trying to read register from the inferior, to do this we end up calling target_ops::fetch_registers, which, for the x86-64 native target, calls amd64_linux_nat_target::fetch_registers. After this I eventually end up in i387_supply_fxsave, different x86 based targets will end in different functions to fetch registers, but it doesn't really matter which function we end up in, the problem is this line, which is repeated in many places: i386_gdbarch_tdep *tdep = (i386_gdbarch_tdep *) gdbarch_tdep (arch); The problem here is that the ARCH in this line comes from the current inferior, which, as we discussed above, will be a RISC-V gdbarch, the tdep field will actually be of type riscv_gdbarch_tdep, not i386_gdbarch_tdep. After this cast we are relying on undefined behaviour, in my case I happen to trigger an assert, but this might not always be the case. The thing I tried that exposed this problem was of course, trying to start an executable of the wrong architecture on a native target. I don't think that the correct solution for this problem is to detect, at the point of cast, that the gdbarch_tdep object is of the wrong type, but, I did wonder, is there a way that we could protect ourselves from incorrectly casting the gdbarch_tdep object? I think that there is something we can do here, and this commit is the first step in that direction, though no actual check is added by this commit. This commit can be split into two parts: (1) In gdbarch.h and arch-utils.c. In these files I have modified gdbarch_tdep (the function) so that it now takes a template argument, like this: template<typename TDepType> static inline TDepType * gdbarch_tdep (struct gdbarch *gdbarch) { struct gdbarch_tdep *tdep = gdbarch_tdep_1 (gdbarch); return static_cast<TDepType *> (tdep); } After this change we are no better protected, but the cast is now done within the gdbarch_tdep function rather than at the call sites, this leads to the second, much larger change in this commit, (2) Everywhere gdbarch_tdep is called, we make changes like this: - i386_gdbarch_tdep *tdep = (i386_gdbarch_tdep *) gdbarch_tdep (arch); + i386_gdbarch_tdep *tdep = gdbarch_tdep<i386_gdbarch_tdep> (arch); There should be no functional change after this commit. In the next commit I will build on this change to add an assertion in gdbarch_tdep that checks we are casting to the correct type.
1971 lines
55 KiB
C
1971 lines
55 KiB
C
/* Intel 387 floating point stuff.
|
||
|
||
Copyright (C) 1988-2022 Free Software Foundation, Inc.
|
||
|
||
This file is part of GDB.
|
||
|
||
This program is free software; you can redistribute it and/or modify
|
||
it under the terms of the GNU General Public License as published by
|
||
the Free Software Foundation; either version 3 of the License, or
|
||
(at your option) any later version.
|
||
|
||
This program is distributed in the hope that it will be useful,
|
||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
GNU General Public License for more details.
|
||
|
||
You should have received a copy of the GNU General Public License
|
||
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
||
|
||
#include "defs.h"
|
||
#include "frame.h"
|
||
#include "gdbcore.h"
|
||
#include "inferior.h"
|
||
#include "language.h"
|
||
#include "regcache.h"
|
||
#include "target-float.h"
|
||
#include "value.h"
|
||
|
||
#include "i386-tdep.h"
|
||
#include "i387-tdep.h"
|
||
#include "gdbsupport/x86-xstate.h"
|
||
|
||
/* Print the floating point number specified by RAW. */
|
||
|
||
static void
|
||
print_i387_value (struct gdbarch *gdbarch,
|
||
const gdb_byte *raw, struct ui_file *file)
|
||
{
|
||
/* We try to print 19 digits. The last digit may or may not contain
|
||
garbage, but we'd better print one too many. We need enough room
|
||
to print the value, 1 position for the sign, 1 for the decimal
|
||
point, 19 for the digits and 6 for the exponent adds up to 27. */
|
||
const struct type *type = i387_ext_type (gdbarch);
|
||
std::string str = target_float_to_string (raw, type, " %-+27.19g");
|
||
gdb_printf (file, "%s", str.c_str ());
|
||
}
|
||
|
||
/* Print the classification for the register contents RAW. */
|
||
|
||
static void
|
||
print_i387_ext (struct gdbarch *gdbarch,
|
||
const gdb_byte *raw, struct ui_file *file)
|
||
{
|
||
int sign;
|
||
int integer;
|
||
unsigned int exponent;
|
||
unsigned long fraction[2];
|
||
|
||
sign = raw[9] & 0x80;
|
||
integer = raw[7] & 0x80;
|
||
exponent = (((raw[9] & 0x7f) << 8) | raw[8]);
|
||
fraction[0] = ((raw[3] << 24) | (raw[2] << 16) | (raw[1] << 8) | raw[0]);
|
||
fraction[1] = (((raw[7] & 0x7f) << 24) | (raw[6] << 16)
|
||
| (raw[5] << 8) | raw[4]);
|
||
|
||
if (exponent == 0x7fff && integer)
|
||
{
|
||
if (fraction[0] == 0x00000000 && fraction[1] == 0x00000000)
|
||
/* Infinity. */
|
||
gdb_printf (file, " %cInf", (sign ? '-' : '+'));
|
||
else if (sign && fraction[0] == 0x00000000 && fraction[1] == 0x40000000)
|
||
/* Real Indefinite (QNaN). */
|
||
gdb_puts (" Real Indefinite (QNaN)", file);
|
||
else if (fraction[1] & 0x40000000)
|
||
/* QNaN. */
|
||
gdb_puts (" QNaN", file);
|
||
else
|
||
/* SNaN. */
|
||
gdb_puts (" SNaN", file);
|
||
}
|
||
else if (exponent < 0x7fff && exponent > 0x0000 && integer)
|
||
/* Normal. */
|
||
print_i387_value (gdbarch, raw, file);
|
||
else if (exponent == 0x0000)
|
||
{
|
||
/* Denormal or zero. */
|
||
print_i387_value (gdbarch, raw, file);
|
||
|
||
if (integer)
|
||
/* Pseudo-denormal. */
|
||
gdb_puts (" Pseudo-denormal", file);
|
||
else if (fraction[0] || fraction[1])
|
||
/* Denormal. */
|
||
gdb_puts (" Denormal", file);
|
||
}
|
||
else
|
||
/* Unsupported. */
|
||
gdb_puts (" Unsupported", file);
|
||
}
|
||
|
||
/* Print the status word STATUS. If STATUS_P is false, then STATUS
|
||
was unavailable. */
|
||
|
||
static void
|
||
print_i387_status_word (int status_p,
|
||
unsigned int status, struct ui_file *file)
|
||
{
|
||
gdb_printf (file, "Status Word: ");
|
||
if (!status_p)
|
||
{
|
||
gdb_printf (file, "%s\n", _("<unavailable>"));
|
||
return;
|
||
}
|
||
|
||
gdb_printf (file, "%s", hex_string_custom (status, 4));
|
||
gdb_puts (" ", file);
|
||
gdb_printf (file, " %s", (status & 0x0001) ? "IE" : " ");
|
||
gdb_printf (file, " %s", (status & 0x0002) ? "DE" : " ");
|
||
gdb_printf (file, " %s", (status & 0x0004) ? "ZE" : " ");
|
||
gdb_printf (file, " %s", (status & 0x0008) ? "OE" : " ");
|
||
gdb_printf (file, " %s", (status & 0x0010) ? "UE" : " ");
|
||
gdb_printf (file, " %s", (status & 0x0020) ? "PE" : " ");
|
||
gdb_puts (" ", file);
|
||
gdb_printf (file, " %s", (status & 0x0080) ? "ES" : " ");
|
||
gdb_puts (" ", file);
|
||
gdb_printf (file, " %s", (status & 0x0040) ? "SF" : " ");
|
||
gdb_puts (" ", file);
|
||
gdb_printf (file, " %s", (status & 0x0100) ? "C0" : " ");
|
||
gdb_printf (file, " %s", (status & 0x0200) ? "C1" : " ");
|
||
gdb_printf (file, " %s", (status & 0x0400) ? "C2" : " ");
|
||
gdb_printf (file, " %s", (status & 0x4000) ? "C3" : " ");
|
||
|
||
gdb_puts ("\n", file);
|
||
|
||
gdb_printf (file,
|
||
" TOP: %d\n", ((status >> 11) & 7));
|
||
}
|
||
|
||
/* Print the control word CONTROL. If CONTROL_P is false, then
|
||
CONTROL was unavailable. */
|
||
|
||
static void
|
||
print_i387_control_word (int control_p,
|
||
unsigned int control, struct ui_file *file)
|
||
{
|
||
gdb_printf (file, "Control Word: ");
|
||
if (!control_p)
|
||
{
|
||
gdb_printf (file, "%s\n", _("<unavailable>"));
|
||
return;
|
||
}
|
||
|
||
gdb_printf (file, "%s", hex_string_custom (control, 4));
|
||
gdb_puts (" ", file);
|
||
gdb_printf (file, " %s", (control & 0x0001) ? "IM" : " ");
|
||
gdb_printf (file, " %s", (control & 0x0002) ? "DM" : " ");
|
||
gdb_printf (file, " %s", (control & 0x0004) ? "ZM" : " ");
|
||
gdb_printf (file, " %s", (control & 0x0008) ? "OM" : " ");
|
||
gdb_printf (file, " %s", (control & 0x0010) ? "UM" : " ");
|
||
gdb_printf (file, " %s", (control & 0x0020) ? "PM" : " ");
|
||
|
||
gdb_puts ("\n", file);
|
||
|
||
gdb_puts (" PC: ", file);
|
||
switch ((control >> 8) & 3)
|
||
{
|
||
case 0:
|
||
gdb_puts ("Single Precision (24-bits)\n", file);
|
||
break;
|
||
case 1:
|
||
gdb_puts ("Reserved\n", file);
|
||
break;
|
||
case 2:
|
||
gdb_puts ("Double Precision (53-bits)\n", file);
|
||
break;
|
||
case 3:
|
||
gdb_puts ("Extended Precision (64-bits)\n", file);
|
||
break;
|
||
}
|
||
|
||
gdb_puts (" RC: ", file);
|
||
switch ((control >> 10) & 3)
|
||
{
|
||
case 0:
|
||
gdb_puts ("Round to nearest\n", file);
|
||
break;
|
||
case 1:
|
||
gdb_puts ("Round down\n", file);
|
||
break;
|
||
case 2:
|
||
gdb_puts ("Round up\n", file);
|
||
break;
|
||
case 3:
|
||
gdb_puts ("Round toward zero\n", file);
|
||
break;
|
||
}
|
||
}
|
||
|
||
/* Print out the i387 floating point state. Note that we ignore FRAME
|
||
in the code below. That's OK since floating-point registers are
|
||
never saved on the stack. */
|
||
|
||
void
|
||
i387_print_float_info (struct gdbarch *gdbarch, struct ui_file *file,
|
||
struct frame_info *frame, const char *args)
|
||
{
|
||
i386_gdbarch_tdep *tdep = gdbarch_tdep<i386_gdbarch_tdep> (gdbarch);
|
||
ULONGEST fctrl;
|
||
int fctrl_p;
|
||
ULONGEST fstat;
|
||
int fstat_p;
|
||
ULONGEST ftag;
|
||
int ftag_p;
|
||
ULONGEST fiseg;
|
||
int fiseg_p;
|
||
ULONGEST fioff;
|
||
int fioff_p;
|
||
ULONGEST foseg;
|
||
int foseg_p;
|
||
ULONGEST fooff;
|
||
int fooff_p;
|
||
ULONGEST fop;
|
||
int fop_p;
|
||
int fpreg;
|
||
int top;
|
||
|
||
gdb_assert (gdbarch == get_frame_arch (frame));
|
||
|
||
fctrl_p = read_frame_register_unsigned (frame,
|
||
I387_FCTRL_REGNUM (tdep), &fctrl);
|
||
fstat_p = read_frame_register_unsigned (frame,
|
||
I387_FSTAT_REGNUM (tdep), &fstat);
|
||
ftag_p = read_frame_register_unsigned (frame,
|
||
I387_FTAG_REGNUM (tdep), &ftag);
|
||
fiseg_p = read_frame_register_unsigned (frame,
|
||
I387_FISEG_REGNUM (tdep), &fiseg);
|
||
fioff_p = read_frame_register_unsigned (frame,
|
||
I387_FIOFF_REGNUM (tdep), &fioff);
|
||
foseg_p = read_frame_register_unsigned (frame,
|
||
I387_FOSEG_REGNUM (tdep), &foseg);
|
||
fooff_p = read_frame_register_unsigned (frame,
|
||
I387_FOOFF_REGNUM (tdep), &fooff);
|
||
fop_p = read_frame_register_unsigned (frame,
|
||
I387_FOP_REGNUM (tdep), &fop);
|
||
|
||
if (fstat_p)
|
||
{
|
||
top = ((fstat >> 11) & 7);
|
||
|
||
for (fpreg = 7; fpreg >= 0; fpreg--)
|
||
{
|
||
struct value *regval;
|
||
int regnum;
|
||
int i;
|
||
int tag = -1;
|
||
|
||
gdb_printf (file, "%sR%d: ", fpreg == top ? "=>" : " ", fpreg);
|
||
|
||
if (ftag_p)
|
||
{
|
||
tag = (ftag >> (fpreg * 2)) & 3;
|
||
|
||
switch (tag)
|
||
{
|
||
case 0:
|
||
gdb_puts ("Valid ", file);
|
||
break;
|
||
case 1:
|
||
gdb_puts ("Zero ", file);
|
||
break;
|
||
case 2:
|
||
gdb_puts ("Special ", file);
|
||
break;
|
||
case 3:
|
||
gdb_puts ("Empty ", file);
|
||
break;
|
||
}
|
||
}
|
||
else
|
||
gdb_puts ("Unknown ", file);
|
||
|
||
regnum = (fpreg + 8 - top) % 8 + I387_ST0_REGNUM (tdep);
|
||
regval = get_frame_register_value (frame, regnum);
|
||
|
||
if (value_entirely_available (regval))
|
||
{
|
||
const gdb_byte *raw = value_contents (regval).data ();
|
||
|
||
gdb_puts ("0x", file);
|
||
for (i = 9; i >= 0; i--)
|
||
gdb_printf (file, "%02x", raw[i]);
|
||
|
||
if (tag != -1 && tag != 3)
|
||
print_i387_ext (gdbarch, raw, file);
|
||
}
|
||
else
|
||
gdb_printf (file, "%s", _("<unavailable>"));
|
||
|
||
gdb_puts ("\n", file);
|
||
}
|
||
}
|
||
|
||
gdb_puts ("\n", file);
|
||
print_i387_status_word (fstat_p, fstat, file);
|
||
print_i387_control_word (fctrl_p, fctrl, file);
|
||
gdb_printf (file, "Tag Word: %s\n",
|
||
ftag_p ? hex_string_custom (ftag, 4) : _("<unavailable>"));
|
||
gdb_printf (file, "Instruction Pointer: %s:",
|
||
fiseg_p ? hex_string_custom (fiseg, 2) : _("<unavailable>"));
|
||
gdb_printf (file, "%s\n",
|
||
fioff_p ? hex_string_custom (fioff, 8) : _("<unavailable>"));
|
||
gdb_printf (file, "Operand Pointer: %s:",
|
||
foseg_p ? hex_string_custom (foseg, 2) : _("<unavailable>"));
|
||
gdb_printf (file, "%s\n",
|
||
fooff_p ? hex_string_custom (fooff, 8) : _("<unavailable>"));
|
||
gdb_printf (file, "Opcode: %s\n",
|
||
fop_p
|
||
? (hex_string_custom (fop ? (fop | 0xd800) : 0, 4))
|
||
: _("<unavailable>"));
|
||
}
|
||
|
||
|
||
/* Return nonzero if a value of type TYPE stored in register REGNUM
|
||
needs any special handling. */
|
||
|
||
int
|
||
i387_convert_register_p (struct gdbarch *gdbarch, int regnum,
|
||
struct type *type)
|
||
{
|
||
if (i386_fp_regnum_p (gdbarch, regnum))
|
||
{
|
||
/* Floating point registers must be converted unless we are
|
||
accessing them in their hardware type or TYPE is not float. */
|
||
if (type == i387_ext_type (gdbarch)
|
||
|| type->code () != TYPE_CODE_FLT)
|
||
return 0;
|
||
else
|
||
return 1;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
/* Read a value of type TYPE from register REGNUM in frame FRAME, and
|
||
return its contents in TO. */
|
||
|
||
int
|
||
i387_register_to_value (struct frame_info *frame, int regnum,
|
||
struct type *type, gdb_byte *to,
|
||
int *optimizedp, int *unavailablep)
|
||
{
|
||
struct gdbarch *gdbarch = get_frame_arch (frame);
|
||
gdb_byte from[I386_MAX_REGISTER_SIZE];
|
||
|
||
gdb_assert (i386_fp_regnum_p (gdbarch, regnum));
|
||
|
||
/* We only support floating-point values. */
|
||
if (type->code () != TYPE_CODE_FLT)
|
||
{
|
||
warning (_("Cannot convert floating-point register value "
|
||
"to non-floating-point type."));
|
||
*optimizedp = *unavailablep = 0;
|
||
return 0;
|
||
}
|
||
|
||
/* Convert to TYPE. */
|
||
if (!get_frame_register_bytes (frame, regnum, 0,
|
||
gdb::make_array_view (from,
|
||
register_size (gdbarch,
|
||
regnum)),
|
||
optimizedp, unavailablep))
|
||
return 0;
|
||
|
||
target_float_convert (from, i387_ext_type (gdbarch), to, type);
|
||
*optimizedp = *unavailablep = 0;
|
||
return 1;
|
||
}
|
||
|
||
/* Write the contents FROM of a value of type TYPE into register
|
||
REGNUM in frame FRAME. */
|
||
|
||
void
|
||
i387_value_to_register (struct frame_info *frame, int regnum,
|
||
struct type *type, const gdb_byte *from)
|
||
{
|
||
struct gdbarch *gdbarch = get_frame_arch (frame);
|
||
gdb_byte to[I386_MAX_REGISTER_SIZE];
|
||
|
||
gdb_assert (i386_fp_regnum_p (gdbarch, regnum));
|
||
|
||
/* We only support floating-point values. */
|
||
if (type->code () != TYPE_CODE_FLT)
|
||
{
|
||
warning (_("Cannot convert non-floating-point type "
|
||
"to floating-point register value."));
|
||
return;
|
||
}
|
||
|
||
/* Convert from TYPE. */
|
||
target_float_convert (from, type, to, i387_ext_type (gdbarch));
|
||
put_frame_register (frame, regnum, to);
|
||
}
|
||
|
||
|
||
/* Handle FSAVE and FXSAVE formats. */
|
||
|
||
/* At fsave_offset[REGNUM] you'll find the offset to the location in
|
||
the data structure used by the "fsave" instruction where GDB
|
||
register REGNUM is stored. */
|
||
|
||
static int fsave_offset[] =
|
||
{
|
||
28 + 0 * 10, /* %st(0) ... */
|
||
28 + 1 * 10,
|
||
28 + 2 * 10,
|
||
28 + 3 * 10,
|
||
28 + 4 * 10,
|
||
28 + 5 * 10,
|
||
28 + 6 * 10,
|
||
28 + 7 * 10, /* ... %st(7). */
|
||
0, /* `fctrl' (16 bits). */
|
||
4, /* `fstat' (16 bits). */
|
||
8, /* `ftag' (16 bits). */
|
||
16, /* `fiseg' (16 bits). */
|
||
12, /* `fioff'. */
|
||
24, /* `foseg' (16 bits). */
|
||
20, /* `fooff'. */
|
||
18 /* `fop' (bottom 11 bits). */
|
||
};
|
||
|
||
#define FSAVE_ADDR(tdep, fsave, regnum) \
|
||
(fsave + fsave_offset[regnum - I387_ST0_REGNUM (tdep)])
|
||
|
||
|
||
/* Fill register REGNUM in REGCACHE with the appropriate value from
|
||
*FSAVE. This function masks off any of the reserved bits in
|
||
*FSAVE. */
|
||
|
||
void
|
||
i387_supply_fsave (struct regcache *regcache, int regnum, const void *fsave)
|
||
{
|
||
struct gdbarch *gdbarch = regcache->arch ();
|
||
i386_gdbarch_tdep *tdep = gdbarch_tdep<i386_gdbarch_tdep> (gdbarch);
|
||
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
||
const gdb_byte *regs = (const gdb_byte *) fsave;
|
||
int i;
|
||
|
||
gdb_assert (tdep->st0_regnum >= I386_ST0_REGNUM);
|
||
|
||
for (i = I387_ST0_REGNUM (tdep); i < I387_XMM0_REGNUM (tdep); i++)
|
||
if (regnum == -1 || regnum == i)
|
||
{
|
||
if (fsave == NULL)
|
||
{
|
||
regcache->raw_supply (i, NULL);
|
||
continue;
|
||
}
|
||
|
||
/* Most of the FPU control registers occupy only 16 bits in the
|
||
fsave area. Give those a special treatment. */
|
||
if (i >= I387_FCTRL_REGNUM (tdep)
|
||
&& i != I387_FIOFF_REGNUM (tdep) && i != I387_FOOFF_REGNUM (tdep))
|
||
{
|
||
gdb_byte val[4];
|
||
|
||
memcpy (val, FSAVE_ADDR (tdep, regs, i), 2);
|
||
val[2] = val[3] = 0;
|
||
if (i == I387_FOP_REGNUM (tdep))
|
||
val[1] &= ((1 << 3) - 1);
|
||
regcache->raw_supply (i, val);
|
||
}
|
||
else
|
||
regcache->raw_supply (i, FSAVE_ADDR (tdep, regs, i));
|
||
}
|
||
|
||
/* Provide dummy values for the SSE registers. */
|
||
for (i = I387_XMM0_REGNUM (tdep); i < I387_MXCSR_REGNUM (tdep); i++)
|
||
if (regnum == -1 || regnum == i)
|
||
regcache->raw_supply (i, NULL);
|
||
if (regnum == -1 || regnum == I387_MXCSR_REGNUM (tdep))
|
||
{
|
||
gdb_byte buf[4];
|
||
|
||
store_unsigned_integer (buf, 4, byte_order, I387_MXCSR_INIT_VAL);
|
||
regcache->raw_supply (I387_MXCSR_REGNUM (tdep), buf);
|
||
}
|
||
}
|
||
|
||
/* Fill register REGNUM (if it is a floating-point register) in *FSAVE
|
||
with the value from REGCACHE. If REGNUM is -1, do this for all
|
||
registers. This function doesn't touch any of the reserved bits in
|
||
*FSAVE. */
|
||
|
||
void
|
||
i387_collect_fsave (const struct regcache *regcache, int regnum, void *fsave)
|
||
{
|
||
gdbarch *arch = regcache->arch ();
|
||
i386_gdbarch_tdep *tdep = gdbarch_tdep<i386_gdbarch_tdep> (arch);
|
||
gdb_byte *regs = (gdb_byte *) fsave;
|
||
int i;
|
||
|
||
gdb_assert (tdep->st0_regnum >= I386_ST0_REGNUM);
|
||
|
||
for (i = I387_ST0_REGNUM (tdep); i < I387_XMM0_REGNUM (tdep); i++)
|
||
if (regnum == -1 || regnum == i)
|
||
{
|
||
/* Most of the FPU control registers occupy only 16 bits in
|
||
the fsave area. Give those a special treatment. */
|
||
if (i >= I387_FCTRL_REGNUM (tdep)
|
||
&& i != I387_FIOFF_REGNUM (tdep) && i != I387_FOOFF_REGNUM (tdep))
|
||
{
|
||
gdb_byte buf[4];
|
||
|
||
regcache->raw_collect (i, buf);
|
||
|
||
if (i == I387_FOP_REGNUM (tdep))
|
||
{
|
||
/* The opcode occupies only 11 bits. Make sure we
|
||
don't touch the other bits. */
|
||
buf[1] &= ((1 << 3) - 1);
|
||
buf[1] |= ((FSAVE_ADDR (tdep, regs, i))[1] & ~((1 << 3) - 1));
|
||
}
|
||
memcpy (FSAVE_ADDR (tdep, regs, i), buf, 2);
|
||
}
|
||
else
|
||
regcache->raw_collect (i, FSAVE_ADDR (tdep, regs, i));
|
||
}
|
||
}
|
||
|
||
|
||
/* At fxsave_offset[REGNUM] you'll find the offset to the location in
|
||
the data structure used by the "fxsave" instruction where GDB
|
||
register REGNUM is stored. */
|
||
|
||
static int fxsave_offset[] =
|
||
{
|
||
32, /* %st(0) through ... */
|
||
48,
|
||
64,
|
||
80,
|
||
96,
|
||
112,
|
||
128,
|
||
144, /* ... %st(7) (80 bits each). */
|
||
0, /* `fctrl' (16 bits). */
|
||
2, /* `fstat' (16 bits). */
|
||
4, /* `ftag' (16 bits). */
|
||
12, /* `fiseg' (16 bits). */
|
||
8, /* `fioff'. */
|
||
20, /* `foseg' (16 bits). */
|
||
16, /* `fooff'. */
|
||
6, /* `fop' (bottom 11 bits). */
|
||
160 + 0 * 16, /* %xmm0 through ... */
|
||
160 + 1 * 16,
|
||
160 + 2 * 16,
|
||
160 + 3 * 16,
|
||
160 + 4 * 16,
|
||
160 + 5 * 16,
|
||
160 + 6 * 16,
|
||
160 + 7 * 16,
|
||
160 + 8 * 16,
|
||
160 + 9 * 16,
|
||
160 + 10 * 16,
|
||
160 + 11 * 16,
|
||
160 + 12 * 16,
|
||
160 + 13 * 16,
|
||
160 + 14 * 16,
|
||
160 + 15 * 16, /* ... %xmm15 (128 bits each). */
|
||
};
|
||
|
||
#define FXSAVE_ADDR(tdep, fxsave, regnum) \
|
||
(fxsave + fxsave_offset[regnum - I387_ST0_REGNUM (tdep)])
|
||
|
||
/* We made an unfortunate choice in putting %mxcsr after the SSE
|
||
registers %xmm0-%xmm7 instead of before, since it makes supporting
|
||
the registers %xmm8-%xmm15 on AMD64 a bit involved. Therefore we
|
||
don't include the offset for %mxcsr here above. */
|
||
|
||
#define FXSAVE_MXCSR_ADDR(fxsave) (fxsave + 24)
|
||
|
||
static int i387_tag (const gdb_byte *raw);
|
||
|
||
|
||
/* Fill register REGNUM in REGCACHE with the appropriate
|
||
floating-point or SSE register value from *FXSAVE. This function
|
||
masks off any of the reserved bits in *FXSAVE. */
|
||
|
||
void
|
||
i387_supply_fxsave (struct regcache *regcache, int regnum, const void *fxsave)
|
||
{
|
||
gdbarch *arch = regcache->arch ();
|
||
i386_gdbarch_tdep *tdep = gdbarch_tdep<i386_gdbarch_tdep> (arch);
|
||
const gdb_byte *regs = (const gdb_byte *) fxsave;
|
||
int i;
|
||
|
||
gdb_assert (tdep->st0_regnum >= I386_ST0_REGNUM);
|
||
gdb_assert (tdep->num_xmm_regs > 0);
|
||
|
||
for (i = I387_ST0_REGNUM (tdep); i < I387_MXCSR_REGNUM (tdep); i++)
|
||
if (regnum == -1 || regnum == i)
|
||
{
|
||
if (regs == NULL)
|
||
{
|
||
regcache->raw_supply (i, NULL);
|
||
continue;
|
||
}
|
||
|
||
/* Most of the FPU control registers occupy only 16 bits in
|
||
the fxsave area. Give those a special treatment. */
|
||
if (i >= I387_FCTRL_REGNUM (tdep) && i < I387_XMM0_REGNUM (tdep)
|
||
&& i != I387_FIOFF_REGNUM (tdep) && i != I387_FOOFF_REGNUM (tdep))
|
||
{
|
||
gdb_byte val[4];
|
||
|
||
memcpy (val, FXSAVE_ADDR (tdep, regs, i), 2);
|
||
val[2] = val[3] = 0;
|
||
if (i == I387_FOP_REGNUM (tdep))
|
||
val[1] &= ((1 << 3) - 1);
|
||
else if (i== I387_FTAG_REGNUM (tdep))
|
||
{
|
||
/* The fxsave area contains a simplified version of
|
||
the tag word. We have to look at the actual 80-bit
|
||
FP data to recreate the traditional i387 tag word. */
|
||
|
||
unsigned long ftag = 0;
|
||
int fpreg;
|
||
int top;
|
||
|
||
top = ((FXSAVE_ADDR (tdep, regs,
|
||
I387_FSTAT_REGNUM (tdep)))[1] >> 3);
|
||
top &= 0x7;
|
||
|
||
for (fpreg = 7; fpreg >= 0; fpreg--)
|
||
{
|
||
int tag;
|
||
|
||
if (val[0] & (1 << fpreg))
|
||
{
|
||
int thisreg = (fpreg + 8 - top) % 8
|
||
+ I387_ST0_REGNUM (tdep);
|
||
tag = i387_tag (FXSAVE_ADDR (tdep, regs, thisreg));
|
||
}
|
||
else
|
||
tag = 3; /* Empty */
|
||
|
||
ftag |= tag << (2 * fpreg);
|
||
}
|
||
val[0] = ftag & 0xff;
|
||
val[1] = (ftag >> 8) & 0xff;
|
||
}
|
||
regcache->raw_supply (i, val);
|
||
}
|
||
else
|
||
regcache->raw_supply (i, FXSAVE_ADDR (tdep, regs, i));
|
||
}
|
||
|
||
if (regnum == I387_MXCSR_REGNUM (tdep) || regnum == -1)
|
||
{
|
||
if (regs == NULL)
|
||
regcache->raw_supply (I387_MXCSR_REGNUM (tdep), NULL);
|
||
else
|
||
regcache->raw_supply (I387_MXCSR_REGNUM (tdep),
|
||
FXSAVE_MXCSR_ADDR (regs));
|
||
}
|
||
}
|
||
|
||
/* Fill register REGNUM (if it is a floating-point or SSE register) in
|
||
*FXSAVE with the value from REGCACHE. If REGNUM is -1, do this for
|
||
all registers. This function doesn't touch any of the reserved
|
||
bits in *FXSAVE. */
|
||
|
||
void
|
||
i387_collect_fxsave (const struct regcache *regcache, int regnum, void *fxsave)
|
||
{
|
||
gdbarch *arch = regcache->arch ();
|
||
i386_gdbarch_tdep *tdep = gdbarch_tdep<i386_gdbarch_tdep> (arch);
|
||
gdb_byte *regs = (gdb_byte *) fxsave;
|
||
int i;
|
||
|
||
gdb_assert (tdep->st0_regnum >= I386_ST0_REGNUM);
|
||
gdb_assert (tdep->num_xmm_regs > 0);
|
||
|
||
for (i = I387_ST0_REGNUM (tdep); i < I387_MXCSR_REGNUM (tdep); i++)
|
||
if (regnum == -1 || regnum == i)
|
||
{
|
||
/* Most of the FPU control registers occupy only 16 bits in
|
||
the fxsave area. Give those a special treatment. */
|
||
if (i >= I387_FCTRL_REGNUM (tdep) && i < I387_XMM0_REGNUM (tdep)
|
||
&& i != I387_FIOFF_REGNUM (tdep) && i != I387_FOOFF_REGNUM (tdep))
|
||
{
|
||
gdb_byte buf[4];
|
||
|
||
regcache->raw_collect (i, buf);
|
||
|
||
if (i == I387_FOP_REGNUM (tdep))
|
||
{
|
||
/* The opcode occupies only 11 bits. Make sure we
|
||
don't touch the other bits. */
|
||
buf[1] &= ((1 << 3) - 1);
|
||
buf[1] |= ((FXSAVE_ADDR (tdep, regs, i))[1] & ~((1 << 3) - 1));
|
||
}
|
||
else if (i == I387_FTAG_REGNUM (tdep))
|
||
{
|
||
/* Converting back is much easier. */
|
||
|
||
unsigned short ftag;
|
||
int fpreg;
|
||
|
||
ftag = (buf[1] << 8) | buf[0];
|
||
buf[0] = 0;
|
||
buf[1] = 0;
|
||
|
||
for (fpreg = 7; fpreg >= 0; fpreg--)
|
||
{
|
||
int tag = (ftag >> (fpreg * 2)) & 3;
|
||
|
||
if (tag != 3)
|
||
buf[0] |= (1 << fpreg);
|
||
}
|
||
}
|
||
memcpy (FXSAVE_ADDR (tdep, regs, i), buf, 2);
|
||
}
|
||
else
|
||
regcache->raw_collect (i, FXSAVE_ADDR (tdep, regs, i));
|
||
}
|
||
|
||
if (regnum == I387_MXCSR_REGNUM (tdep) || regnum == -1)
|
||
regcache->raw_collect (I387_MXCSR_REGNUM (tdep),
|
||
FXSAVE_MXCSR_ADDR (regs));
|
||
}
|
||
|
||
/* `xstate_bv' is at byte offset 512. */
|
||
#define XSAVE_XSTATE_BV_ADDR(xsave) (xsave + 512)
|
||
|
||
/* At xsave_avxh_offset[REGNUM] you'll find the offset to the location in
|
||
the upper 128bit of AVX register data structure used by the "xsave"
|
||
instruction where GDB register REGNUM is stored. */
|
||
|
||
static int xsave_avxh_offset[] =
|
||
{
|
||
576 + 0 * 16, /* Upper 128bit of %ymm0 through ... */
|
||
576 + 1 * 16,
|
||
576 + 2 * 16,
|
||
576 + 3 * 16,
|
||
576 + 4 * 16,
|
||
576 + 5 * 16,
|
||
576 + 6 * 16,
|
||
576 + 7 * 16,
|
||
576 + 8 * 16,
|
||
576 + 9 * 16,
|
||
576 + 10 * 16,
|
||
576 + 11 * 16,
|
||
576 + 12 * 16,
|
||
576 + 13 * 16,
|
||
576 + 14 * 16,
|
||
576 + 15 * 16 /* Upper 128bit of ... %ymm15 (128 bits each). */
|
||
};
|
||
|
||
#define XSAVE_AVXH_ADDR(tdep, xsave, regnum) \
|
||
(xsave + xsave_avxh_offset[regnum - I387_YMM0H_REGNUM (tdep)])
|
||
|
||
/* At xsave_ymm_avx512_offset[REGNUM] you'll find the offset to the location in
|
||
the upper 128bit of ZMM register data structure used by the "xsave"
|
||
instruction where GDB register REGNUM is stored. */
|
||
|
||
static int xsave_ymm_avx512_offset[] =
|
||
{
|
||
/* HI16_ZMM_area + 16 bytes + regnum* 64 bytes. */
|
||
1664 + 16 + 0 * 64, /* %ymm16 through... */
|
||
1664 + 16 + 1 * 64,
|
||
1664 + 16 + 2 * 64,
|
||
1664 + 16 + 3 * 64,
|
||
1664 + 16 + 4 * 64,
|
||
1664 + 16 + 5 * 64,
|
||
1664 + 16 + 6 * 64,
|
||
1664 + 16 + 7 * 64,
|
||
1664 + 16 + 8 * 64,
|
||
1664 + 16 + 9 * 64,
|
||
1664 + 16 + 10 * 64,
|
||
1664 + 16 + 11 * 64,
|
||
1664 + 16 + 12 * 64,
|
||
1664 + 16 + 13 * 64,
|
||
1664 + 16 + 14 * 64,
|
||
1664 + 16 + 15 * 64 /* ... %ymm31 (128 bits each). */
|
||
};
|
||
|
||
#define XSAVE_YMM_AVX512_ADDR(tdep, xsave, regnum) \
|
||
(xsave + xsave_ymm_avx512_offset[regnum - I387_YMM16H_REGNUM (tdep)])
|
||
|
||
static int xsave_xmm_avx512_offset[] =
|
||
{
|
||
1664 + 0 * 64, /* %ymm16 through... */
|
||
1664 + 1 * 64,
|
||
1664 + 2 * 64,
|
||
1664 + 3 * 64,
|
||
1664 + 4 * 64,
|
||
1664 + 5 * 64,
|
||
1664 + 6 * 64,
|
||
1664 + 7 * 64,
|
||
1664 + 8 * 64,
|
||
1664 + 9 * 64,
|
||
1664 + 10 * 64,
|
||
1664 + 11 * 64,
|
||
1664 + 12 * 64,
|
||
1664 + 13 * 64,
|
||
1664 + 14 * 64,
|
||
1664 + 15 * 64 /* ... %ymm31 (128 bits each). */
|
||
};
|
||
|
||
#define XSAVE_XMM_AVX512_ADDR(tdep, xsave, regnum) \
|
||
(xsave + xsave_xmm_avx512_offset[regnum - I387_XMM16_REGNUM (tdep)])
|
||
|
||
static int xsave_mpx_offset[] = {
|
||
960 + 0 * 16, /* bnd0r...bnd3r registers. */
|
||
960 + 1 * 16,
|
||
960 + 2 * 16,
|
||
960 + 3 * 16,
|
||
1024 + 0 * 8, /* bndcfg ... bndstatus. */
|
||
1024 + 1 * 8,
|
||
};
|
||
|
||
#define XSAVE_MPX_ADDR(tdep, xsave, regnum) \
|
||
(xsave + xsave_mpx_offset[regnum - I387_BND0R_REGNUM (tdep)])
|
||
|
||
/* At xsave_avx512__h_offset[REGNUM] you find the offset to the location
|
||
of the AVX512 opmask register data structure used by the "xsave"
|
||
instruction where GDB register REGNUM is stored. */
|
||
|
||
static int xsave_avx512_k_offset[] =
|
||
{
|
||
1088 + 0 * 8, /* %k0 through... */
|
||
1088 + 1 * 8,
|
||
1088 + 2 * 8,
|
||
1088 + 3 * 8,
|
||
1088 + 4 * 8,
|
||
1088 + 5 * 8,
|
||
1088 + 6 * 8,
|
||
1088 + 7 * 8 /* %k7 (64 bits each). */
|
||
};
|
||
|
||
#define XSAVE_AVX512_K_ADDR(tdep, xsave, regnum) \
|
||
(xsave + xsave_avx512_k_offset[regnum - I387_K0_REGNUM (tdep)])
|
||
|
||
/* At xsave_avx512_zmm_h_offset[REGNUM] you find the offset to the location in
|
||
the upper 256bit of AVX512 ZMMH register data structure used by the "xsave"
|
||
instruction where GDB register REGNUM is stored. */
|
||
|
||
static int xsave_avx512_zmm_h_offset[] =
|
||
{
|
||
1152 + 0 * 32,
|
||
1152 + 1 * 32, /* Upper 256bit of %zmmh0 through... */
|
||
1152 + 2 * 32,
|
||
1152 + 3 * 32,
|
||
1152 + 4 * 32,
|
||
1152 + 5 * 32,
|
||
1152 + 6 * 32,
|
||
1152 + 7 * 32,
|
||
1152 + 8 * 32,
|
||
1152 + 9 * 32,
|
||
1152 + 10 * 32,
|
||
1152 + 11 * 32,
|
||
1152 + 12 * 32,
|
||
1152 + 13 * 32,
|
||
1152 + 14 * 32,
|
||
1152 + 15 * 32, /* Upper 256bit of... %zmmh15 (256 bits each). */
|
||
1664 + 32 + 0 * 64, /* Upper 256bit of... %zmmh16 (256 bits each). */
|
||
1664 + 32 + 1 * 64,
|
||
1664 + 32 + 2 * 64,
|
||
1664 + 32 + 3 * 64,
|
||
1664 + 32 + 4 * 64,
|
||
1664 + 32 + 5 * 64,
|
||
1664 + 32 + 6 * 64,
|
||
1664 + 32 + 7 * 64,
|
||
1664 + 32 + 8 * 64,
|
||
1664 + 32 + 9 * 64,
|
||
1664 + 32 + 10 * 64,
|
||
1664 + 32 + 11 * 64,
|
||
1664 + 32 + 12 * 64,
|
||
1664 + 32 + 13 * 64,
|
||
1664 + 32 + 14 * 64,
|
||
1664 + 32 + 15 * 64 /* Upper 256bit of... %zmmh31 (256 bits each). */
|
||
};
|
||
|
||
#define XSAVE_AVX512_ZMM_H_ADDR(tdep, xsave, regnum) \
|
||
(xsave + xsave_avx512_zmm_h_offset[regnum - I387_ZMM0H_REGNUM (tdep)])
|
||
|
||
/* At xsave_pkeys_offset[REGNUM] you find the offset to the location
|
||
of the PKRU register data structure used by the "xsave"
|
||
instruction where GDB register REGNUM is stored. */
|
||
|
||
static int xsave_pkeys_offset[] =
|
||
{
|
||
2688 + 0 * 8 /* %pkru (64 bits in XSTATE, 32-bit actually used by
|
||
instructions and applications). */
|
||
};
|
||
|
||
#define XSAVE_PKEYS_ADDR(tdep, xsave, regnum) \
|
||
(xsave + xsave_pkeys_offset[regnum - I387_PKRU_REGNUM (tdep)])
|
||
|
||
|
||
/* Extract from XSAVE a bitset of the features that are available on the
|
||
target, but which have not yet been enabled. */
|
||
|
||
ULONGEST
|
||
i387_xsave_get_clear_bv (struct gdbarch *gdbarch, const void *xsave)
|
||
{
|
||
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
||
const gdb_byte *regs = (const gdb_byte *) xsave;
|
||
i386_gdbarch_tdep *tdep = gdbarch_tdep<i386_gdbarch_tdep> (gdbarch);
|
||
|
||
/* Get `xstat_bv'. The supported bits in `xstat_bv' are 8 bytes. */
|
||
ULONGEST xstate_bv = extract_unsigned_integer (XSAVE_XSTATE_BV_ADDR (regs),
|
||
8, byte_order);
|
||
|
||
/* Clear part in vector registers if its bit in xstat_bv is zero. */
|
||
ULONGEST clear_bv = (~(xstate_bv)) & tdep->xcr0;
|
||
|
||
return clear_bv;
|
||
}
|
||
|
||
/* Similar to i387_supply_fxsave, but use XSAVE extended state. */
|
||
|
||
void
|
||
i387_supply_xsave (struct regcache *regcache, int regnum,
|
||
const void *xsave)
|
||
{
|
||
struct gdbarch *gdbarch = regcache->arch ();
|
||
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
||
i386_gdbarch_tdep *tdep = gdbarch_tdep<i386_gdbarch_tdep> (gdbarch);
|
||
const gdb_byte *regs = (const gdb_byte *) xsave;
|
||
int i;
|
||
/* In 64-bit mode the split between "low" and "high" ZMM registers is at
|
||
ZMM16. Outside of 64-bit mode there are no "high" ZMM registers at all.
|
||
Precalculate the number to be used for the split point, with the all
|
||
registers in the "low" portion outside of 64-bit mode. */
|
||
unsigned int zmm_endlo_regnum = I387_ZMM0H_REGNUM (tdep)
|
||
+ std::min (tdep->num_zmm_regs, 16);
|
||
ULONGEST clear_bv;
|
||
static const gdb_byte zero[I386_MAX_REGISTER_SIZE] = { 0 };
|
||
enum
|
||
{
|
||
none = 0x0,
|
||
x87 = 0x1,
|
||
sse = 0x2,
|
||
avxh = 0x4,
|
||
mpx = 0x8,
|
||
avx512_k = 0x10,
|
||
avx512_zmm_h = 0x20,
|
||
avx512_ymmh_avx512 = 0x40,
|
||
avx512_xmm_avx512 = 0x80,
|
||
pkeys = 0x100,
|
||
all = x87 | sse | avxh | mpx | avx512_k | avx512_zmm_h
|
||
| avx512_ymmh_avx512 | avx512_xmm_avx512 | pkeys
|
||
} regclass;
|
||
|
||
gdb_assert (regs != NULL);
|
||
gdb_assert (tdep->st0_regnum >= I386_ST0_REGNUM);
|
||
gdb_assert (tdep->num_xmm_regs > 0);
|
||
|
||
if (regnum == -1)
|
||
regclass = all;
|
||
else if (regnum >= I387_PKRU_REGNUM (tdep)
|
||
&& regnum < I387_PKEYSEND_REGNUM (tdep))
|
||
regclass = pkeys;
|
||
else if (regnum >= I387_ZMM0H_REGNUM (tdep)
|
||
&& regnum < I387_ZMMENDH_REGNUM (tdep))
|
||
regclass = avx512_zmm_h;
|
||
else if (regnum >= I387_K0_REGNUM (tdep)
|
||
&& regnum < I387_KEND_REGNUM (tdep))
|
||
regclass = avx512_k;
|
||
else if (regnum >= I387_YMM16H_REGNUM (tdep)
|
||
&& regnum < I387_YMMH_AVX512_END_REGNUM (tdep))
|
||
regclass = avx512_ymmh_avx512;
|
||
else if (regnum >= I387_XMM16_REGNUM (tdep)
|
||
&& regnum < I387_XMM_AVX512_END_REGNUM (tdep))
|
||
regclass = avx512_xmm_avx512;
|
||
else if (regnum >= I387_YMM0H_REGNUM (tdep)
|
||
&& regnum < I387_YMMENDH_REGNUM (tdep))
|
||
regclass = avxh;
|
||
else if (regnum >= I387_BND0R_REGNUM (tdep)
|
||
&& regnum < I387_MPXEND_REGNUM (tdep))
|
||
regclass = mpx;
|
||
else if (regnum >= I387_XMM0_REGNUM (tdep)
|
||
&& regnum < I387_MXCSR_REGNUM (tdep))
|
||
regclass = sse;
|
||
else if (regnum >= I387_ST0_REGNUM (tdep)
|
||
&& regnum < I387_FCTRL_REGNUM (tdep))
|
||
regclass = x87;
|
||
else
|
||
regclass = none;
|
||
|
||
clear_bv = i387_xsave_get_clear_bv (gdbarch, xsave);
|
||
|
||
/* With the delayed xsave mechanism, in between the program
|
||
starting, and the program accessing the vector registers for the
|
||
first time, the register's values are invalid. The kernel
|
||
initializes register states to zero when they are set the first
|
||
time in a program. This means that from the user-space programs'
|
||
perspective, it's the same as if the registers have always been
|
||
zero from the start of the program. Therefore, the debugger
|
||
should provide the same illusion to the user. */
|
||
|
||
switch (regclass)
|
||
{
|
||
case none:
|
||
break;
|
||
|
||
case pkeys:
|
||
if ((clear_bv & X86_XSTATE_PKRU))
|
||
regcache->raw_supply (regnum, zero);
|
||
else
|
||
regcache->raw_supply (regnum, XSAVE_PKEYS_ADDR (tdep, regs, regnum));
|
||
return;
|
||
|
||
case avx512_zmm_h:
|
||
if ((clear_bv & (regnum < zmm_endlo_regnum ? X86_XSTATE_ZMM_H
|
||
: X86_XSTATE_ZMM)))
|
||
regcache->raw_supply (regnum, zero);
|
||
else
|
||
regcache->raw_supply (regnum,
|
||
XSAVE_AVX512_ZMM_H_ADDR (tdep, regs, regnum));
|
||
return;
|
||
|
||
case avx512_k:
|
||
if ((clear_bv & X86_XSTATE_K))
|
||
regcache->raw_supply (regnum, zero);
|
||
else
|
||
regcache->raw_supply (regnum, XSAVE_AVX512_K_ADDR (tdep, regs, regnum));
|
||
return;
|
||
|
||
case avx512_ymmh_avx512:
|
||
if ((clear_bv & X86_XSTATE_ZMM))
|
||
regcache->raw_supply (regnum, zero);
|
||
else
|
||
regcache->raw_supply (regnum,
|
||
XSAVE_YMM_AVX512_ADDR (tdep, regs, regnum));
|
||
return;
|
||
|
||
case avx512_xmm_avx512:
|
||
if ((clear_bv & X86_XSTATE_ZMM))
|
||
regcache->raw_supply (regnum, zero);
|
||
else
|
||
regcache->raw_supply (regnum,
|
||
XSAVE_XMM_AVX512_ADDR (tdep, regs, regnum));
|
||
return;
|
||
|
||
case avxh:
|
||
if ((clear_bv & X86_XSTATE_AVX))
|
||
regcache->raw_supply (regnum, zero);
|
||
else
|
||
regcache->raw_supply (regnum, XSAVE_AVXH_ADDR (tdep, regs, regnum));
|
||
return;
|
||
|
||
case mpx:
|
||
if ((clear_bv & X86_XSTATE_BNDREGS))
|
||
regcache->raw_supply (regnum, zero);
|
||
else
|
||
regcache->raw_supply (regnum, XSAVE_MPX_ADDR (tdep, regs, regnum));
|
||
return;
|
||
|
||
case sse:
|
||
if ((clear_bv & X86_XSTATE_SSE))
|
||
regcache->raw_supply (regnum, zero);
|
||
else
|
||
regcache->raw_supply (regnum, FXSAVE_ADDR (tdep, regs, regnum));
|
||
return;
|
||
|
||
case x87:
|
||
if ((clear_bv & X86_XSTATE_X87))
|
||
regcache->raw_supply (regnum, zero);
|
||
else
|
||
regcache->raw_supply (regnum, FXSAVE_ADDR (tdep, regs, regnum));
|
||
return;
|
||
|
||
case all:
|
||
/* Handle PKEYS registers. */
|
||
if ((tdep->xcr0 & X86_XSTATE_PKRU))
|
||
{
|
||
if ((clear_bv & X86_XSTATE_PKRU))
|
||
{
|
||
for (i = I387_PKRU_REGNUM (tdep);
|
||
i < I387_PKEYSEND_REGNUM (tdep);
|
||
i++)
|
||
regcache->raw_supply (i, zero);
|
||
}
|
||
else
|
||
{
|
||
for (i = I387_PKRU_REGNUM (tdep);
|
||
i < I387_PKEYSEND_REGNUM (tdep);
|
||
i++)
|
||
regcache->raw_supply (i, XSAVE_PKEYS_ADDR (tdep, regs, i));
|
||
}
|
||
}
|
||
|
||
/* Handle the upper halves of the low 8/16 ZMM registers. */
|
||
if ((tdep->xcr0 & X86_XSTATE_ZMM_H))
|
||
{
|
||
if ((clear_bv & X86_XSTATE_ZMM_H))
|
||
{
|
||
for (i = I387_ZMM0H_REGNUM (tdep); i < zmm_endlo_regnum; i++)
|
||
regcache->raw_supply (i, zero);
|
||
}
|
||
else
|
||
{
|
||
for (i = I387_ZMM0H_REGNUM (tdep); i < zmm_endlo_regnum; i++)
|
||
regcache->raw_supply (i,
|
||
XSAVE_AVX512_ZMM_H_ADDR (tdep, regs, i));
|
||
}
|
||
}
|
||
|
||
/* Handle AVX512 OpMask registers. */
|
||
if ((tdep->xcr0 & X86_XSTATE_K))
|
||
{
|
||
if ((clear_bv & X86_XSTATE_K))
|
||
{
|
||
for (i = I387_K0_REGNUM (tdep);
|
||
i < I387_KEND_REGNUM (tdep);
|
||
i++)
|
||
regcache->raw_supply (i, zero);
|
||
}
|
||
else
|
||
{
|
||
for (i = I387_K0_REGNUM (tdep);
|
||
i < I387_KEND_REGNUM (tdep);
|
||
i++)
|
||
regcache->raw_supply (i, XSAVE_AVX512_K_ADDR (tdep, regs, i));
|
||
}
|
||
}
|
||
|
||
/* Handle the upper 16 ZMM/YMM/XMM registers (if any). */
|
||
if ((tdep->xcr0 & X86_XSTATE_ZMM))
|
||
{
|
||
if ((clear_bv & X86_XSTATE_ZMM))
|
||
{
|
||
for (i = zmm_endlo_regnum; i < I387_ZMMENDH_REGNUM (tdep); i++)
|
||
regcache->raw_supply (i, zero);
|
||
for (i = I387_YMM16H_REGNUM (tdep);
|
||
i < I387_YMMH_AVX512_END_REGNUM (tdep);
|
||
i++)
|
||
regcache->raw_supply (i, zero);
|
||
for (i = I387_XMM16_REGNUM (tdep);
|
||
i < I387_XMM_AVX512_END_REGNUM (tdep);
|
||
i++)
|
||
regcache->raw_supply (i, zero);
|
||
}
|
||
else
|
||
{
|
||
for (i = zmm_endlo_regnum; i < I387_ZMMENDH_REGNUM (tdep); i++)
|
||
regcache->raw_supply (i,
|
||
XSAVE_AVX512_ZMM_H_ADDR (tdep, regs, i));
|
||
for (i = I387_YMM16H_REGNUM (tdep);
|
||
i < I387_YMMH_AVX512_END_REGNUM (tdep);
|
||
i++)
|
||
regcache->raw_supply (i, XSAVE_YMM_AVX512_ADDR (tdep, regs, i));
|
||
for (i = I387_XMM16_REGNUM (tdep);
|
||
i < I387_XMM_AVX512_END_REGNUM (tdep);
|
||
i++)
|
||
regcache->raw_supply (i, XSAVE_XMM_AVX512_ADDR (tdep, regs, i));
|
||
}
|
||
}
|
||
/* Handle the upper YMM registers. */
|
||
if ((tdep->xcr0 & X86_XSTATE_AVX))
|
||
{
|
||
if ((clear_bv & X86_XSTATE_AVX))
|
||
{
|
||
for (i = I387_YMM0H_REGNUM (tdep);
|
||
i < I387_YMMENDH_REGNUM (tdep);
|
||
i++)
|
||
regcache->raw_supply (i, zero);
|
||
}
|
||
else
|
||
{
|
||
for (i = I387_YMM0H_REGNUM (tdep);
|
||
i < I387_YMMENDH_REGNUM (tdep);
|
||
i++)
|
||
regcache->raw_supply (i, XSAVE_AVXH_ADDR (tdep, regs, i));
|
||
}
|
||
}
|
||
|
||
/* Handle the MPX registers. */
|
||
if ((tdep->xcr0 & X86_XSTATE_BNDREGS))
|
||
{
|
||
if (clear_bv & X86_XSTATE_BNDREGS)
|
||
{
|
||
for (i = I387_BND0R_REGNUM (tdep);
|
||
i < I387_BNDCFGU_REGNUM (tdep); i++)
|
||
regcache->raw_supply (i, zero);
|
||
}
|
||
else
|
||
{
|
||
for (i = I387_BND0R_REGNUM (tdep);
|
||
i < I387_BNDCFGU_REGNUM (tdep); i++)
|
||
regcache->raw_supply (i, XSAVE_MPX_ADDR (tdep, regs, i));
|
||
}
|
||
}
|
||
|
||
/* Handle the MPX registers. */
|
||
if ((tdep->xcr0 & X86_XSTATE_BNDCFG))
|
||
{
|
||
if (clear_bv & X86_XSTATE_BNDCFG)
|
||
{
|
||
for (i = I387_BNDCFGU_REGNUM (tdep);
|
||
i < I387_MPXEND_REGNUM (tdep); i++)
|
||
regcache->raw_supply (i, zero);
|
||
}
|
||
else
|
||
{
|
||
for (i = I387_BNDCFGU_REGNUM (tdep);
|
||
i < I387_MPXEND_REGNUM (tdep); i++)
|
||
regcache->raw_supply (i, XSAVE_MPX_ADDR (tdep, regs, i));
|
||
}
|
||
}
|
||
|
||
/* Handle the XMM registers. */
|
||
if ((tdep->xcr0 & X86_XSTATE_SSE))
|
||
{
|
||
if ((clear_bv & X86_XSTATE_SSE))
|
||
{
|
||
for (i = I387_XMM0_REGNUM (tdep);
|
||
i < I387_MXCSR_REGNUM (tdep);
|
||
i++)
|
||
regcache->raw_supply (i, zero);
|
||
}
|
||
else
|
||
{
|
||
for (i = I387_XMM0_REGNUM (tdep);
|
||
i < I387_MXCSR_REGNUM (tdep); i++)
|
||
regcache->raw_supply (i, FXSAVE_ADDR (tdep, regs, i));
|
||
}
|
||
}
|
||
|
||
/* Handle the x87 registers. */
|
||
if ((tdep->xcr0 & X86_XSTATE_X87))
|
||
{
|
||
if ((clear_bv & X86_XSTATE_X87))
|
||
{
|
||
for (i = I387_ST0_REGNUM (tdep);
|
||
i < I387_FCTRL_REGNUM (tdep);
|
||
i++)
|
||
regcache->raw_supply (i, zero);
|
||
}
|
||
else
|
||
{
|
||
for (i = I387_ST0_REGNUM (tdep);
|
||
i < I387_FCTRL_REGNUM (tdep);
|
||
i++)
|
||
regcache->raw_supply (i, FXSAVE_ADDR (tdep, regs, i));
|
||
}
|
||
}
|
||
break;
|
||
}
|
||
|
||
/* Only handle x87 control registers. */
|
||
for (i = I387_FCTRL_REGNUM (tdep); i < I387_XMM0_REGNUM (tdep); i++)
|
||
if (regnum == -1 || regnum == i)
|
||
{
|
||
if (clear_bv & X86_XSTATE_X87)
|
||
{
|
||
if (i == I387_FCTRL_REGNUM (tdep))
|
||
{
|
||
gdb_byte buf[4];
|
||
|
||
store_unsigned_integer (buf, 4, byte_order,
|
||
I387_FCTRL_INIT_VAL);
|
||
regcache->raw_supply (i, buf);
|
||
}
|
||
else if (i == I387_FTAG_REGNUM (tdep))
|
||
{
|
||
gdb_byte buf[4];
|
||
|
||
store_unsigned_integer (buf, 4, byte_order, 0xffff);
|
||
regcache->raw_supply (i, buf);
|
||
}
|
||
else
|
||
regcache->raw_supply (i, zero);
|
||
}
|
||
/* Most of the FPU control registers occupy only 16 bits in
|
||
the xsave extended state. Give those a special treatment. */
|
||
else if (i != I387_FIOFF_REGNUM (tdep)
|
||
&& i != I387_FOOFF_REGNUM (tdep))
|
||
{
|
||
gdb_byte val[4];
|
||
|
||
memcpy (val, FXSAVE_ADDR (tdep, regs, i), 2);
|
||
val[2] = val[3] = 0;
|
||
if (i == I387_FOP_REGNUM (tdep))
|
||
val[1] &= ((1 << 3) - 1);
|
||
else if (i == I387_FTAG_REGNUM (tdep))
|
||
{
|
||
/* The fxsave area contains a simplified version of
|
||
the tag word. We have to look at the actual 80-bit
|
||
FP data to recreate the traditional i387 tag word. */
|
||
|
||
unsigned long ftag = 0;
|
||
int fpreg;
|
||
int top;
|
||
|
||
top = ((FXSAVE_ADDR (tdep, regs,
|
||
I387_FSTAT_REGNUM (tdep)))[1] >> 3);
|
||
top &= 0x7;
|
||
|
||
for (fpreg = 7; fpreg >= 0; fpreg--)
|
||
{
|
||
int tag;
|
||
|
||
if (val[0] & (1 << fpreg))
|
||
{
|
||
int thisreg = (fpreg + 8 - top) % 8
|
||
+ I387_ST0_REGNUM (tdep);
|
||
tag = i387_tag (FXSAVE_ADDR (tdep, regs, thisreg));
|
||
}
|
||
else
|
||
tag = 3; /* Empty */
|
||
|
||
ftag |= tag << (2 * fpreg);
|
||
}
|
||
val[0] = ftag & 0xff;
|
||
val[1] = (ftag >> 8) & 0xff;
|
||
}
|
||
regcache->raw_supply (i, val);
|
||
}
|
||
else
|
||
regcache->raw_supply (i, FXSAVE_ADDR (tdep, regs, i));
|
||
}
|
||
|
||
if (regnum == I387_MXCSR_REGNUM (tdep) || regnum == -1)
|
||
{
|
||
/* The MXCSR register is placed into the xsave buffer if either the
|
||
AVX or SSE features are enabled. */
|
||
if ((clear_bv & (X86_XSTATE_AVX | X86_XSTATE_SSE))
|
||
== (X86_XSTATE_AVX | X86_XSTATE_SSE))
|
||
{
|
||
gdb_byte buf[4];
|
||
|
||
store_unsigned_integer (buf, 4, byte_order, I387_MXCSR_INIT_VAL);
|
||
regcache->raw_supply (I387_MXCSR_REGNUM (tdep), buf);
|
||
}
|
||
else
|
||
regcache->raw_supply (I387_MXCSR_REGNUM (tdep),
|
||
FXSAVE_MXCSR_ADDR (regs));
|
||
}
|
||
}
|
||
|
||
/* Similar to i387_collect_fxsave, but use XSAVE extended state. */
|
||
|
||
void
|
||
i387_collect_xsave (const struct regcache *regcache, int regnum,
|
||
void *xsave, int gcore)
|
||
{
|
||
struct gdbarch *gdbarch = regcache->arch ();
|
||
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
||
i386_gdbarch_tdep *tdep = gdbarch_tdep<i386_gdbarch_tdep> (gdbarch);
|
||
gdb_byte *p, *regs = (gdb_byte *) xsave;
|
||
gdb_byte raw[I386_MAX_REGISTER_SIZE];
|
||
ULONGEST initial_xstate_bv, clear_bv, xstate_bv = 0;
|
||
unsigned int i;
|
||
/* See the comment in i387_supply_xsave(). */
|
||
unsigned int zmm_endlo_regnum = I387_ZMM0H_REGNUM (tdep)
|
||
+ std::min (tdep->num_zmm_regs, 16);
|
||
enum
|
||
{
|
||
x87_ctrl_or_mxcsr = 0x1,
|
||
x87 = 0x2,
|
||
sse = 0x4,
|
||
avxh = 0x8,
|
||
mpx = 0x10,
|
||
avx512_k = 0x20,
|
||
avx512_zmm_h = 0x40,
|
||
avx512_ymmh_avx512 = 0x80,
|
||
avx512_xmm_avx512 = 0x100,
|
||
pkeys = 0x200,
|
||
all = x87 | sse | avxh | mpx | avx512_k | avx512_zmm_h
|
||
| avx512_ymmh_avx512 | avx512_xmm_avx512 | pkeys
|
||
} regclass;
|
||
|
||
gdb_assert (tdep->st0_regnum >= I386_ST0_REGNUM);
|
||
gdb_assert (tdep->num_xmm_regs > 0);
|
||
|
||
if (regnum == -1)
|
||
regclass = all;
|
||
else if (regnum >= I387_PKRU_REGNUM (tdep)
|
||
&& regnum < I387_PKEYSEND_REGNUM (tdep))
|
||
regclass = pkeys;
|
||
else if (regnum >= I387_ZMM0H_REGNUM (tdep)
|
||
&& regnum < I387_ZMMENDH_REGNUM (tdep))
|
||
regclass = avx512_zmm_h;
|
||
else if (regnum >= I387_K0_REGNUM (tdep)
|
||
&& regnum < I387_KEND_REGNUM (tdep))
|
||
regclass = avx512_k;
|
||
else if (regnum >= I387_YMM16H_REGNUM (tdep)
|
||
&& regnum < I387_YMMH_AVX512_END_REGNUM (tdep))
|
||
regclass = avx512_ymmh_avx512;
|
||
else if (regnum >= I387_XMM16_REGNUM (tdep)
|
||
&& regnum < I387_XMM_AVX512_END_REGNUM (tdep))
|
||
regclass = avx512_xmm_avx512;
|
||
else if (regnum >= I387_YMM0H_REGNUM (tdep)
|
||
&& regnum < I387_YMMENDH_REGNUM (tdep))
|
||
regclass = avxh;
|
||
else if (regnum >= I387_BND0R_REGNUM (tdep)
|
||
&& regnum < I387_MPXEND_REGNUM (tdep))
|
||
regclass = mpx;
|
||
else if (regnum >= I387_XMM0_REGNUM (tdep)
|
||
&& regnum < I387_MXCSR_REGNUM (tdep))
|
||
regclass = sse;
|
||
else if (regnum >= I387_ST0_REGNUM (tdep)
|
||
&& regnum < I387_FCTRL_REGNUM (tdep))
|
||
regclass = x87;
|
||
else if ((regnum >= I387_FCTRL_REGNUM (tdep)
|
||
&& regnum < I387_XMM0_REGNUM (tdep))
|
||
|| regnum == I387_MXCSR_REGNUM (tdep))
|
||
regclass = x87_ctrl_or_mxcsr;
|
||
else
|
||
internal_error (__FILE__, __LINE__, _("invalid i387 regnum %d"), regnum);
|
||
|
||
if (gcore)
|
||
{
|
||
/* Clear XSAVE extended state. */
|
||
memset (regs, 0, X86_XSTATE_SIZE (tdep->xcr0));
|
||
|
||
/* Update XCR0 and `xstate_bv' with XCR0 for gcore. */
|
||
if (tdep->xsave_xcr0_offset != -1)
|
||
memcpy (regs + tdep->xsave_xcr0_offset, &tdep->xcr0, 8);
|
||
memcpy (XSAVE_XSTATE_BV_ADDR (regs), &tdep->xcr0, 8);
|
||
}
|
||
|
||
/* The supported bits in `xstat_bv' are 8 bytes. */
|
||
initial_xstate_bv = extract_unsigned_integer (XSAVE_XSTATE_BV_ADDR (regs),
|
||
8, byte_order);
|
||
clear_bv = (~(initial_xstate_bv)) & tdep->xcr0;
|
||
|
||
/* The XSAVE buffer was filled lazily by the kernel. Only those
|
||
features that are enabled were written into the buffer, disabled
|
||
features left the buffer uninitialised. In order to identify if any
|
||
registers have changed we will be comparing the register cache
|
||
version to the version in the XSAVE buffer, it is important then that
|
||
at this point we initialise to the default values any features in
|
||
XSAVE that are not yet initialised.
|
||
|
||
This could be made more efficient, we know which features (from
|
||
REGNUM) we will be potentially updating, and could limit ourselves to
|
||
only clearing that feature. However, the extra complexity does not
|
||
seem justified at this point. */
|
||
if (clear_bv)
|
||
{
|
||
if ((clear_bv & X86_XSTATE_PKRU))
|
||
for (i = I387_PKRU_REGNUM (tdep);
|
||
i < I387_PKEYSEND_REGNUM (tdep); i++)
|
||
memset (XSAVE_PKEYS_ADDR (tdep, regs, i), 0, 4);
|
||
|
||
if ((clear_bv & X86_XSTATE_BNDREGS))
|
||
for (i = I387_BND0R_REGNUM (tdep);
|
||
i < I387_BNDCFGU_REGNUM (tdep); i++)
|
||
memset (XSAVE_MPX_ADDR (tdep, regs, i), 0, 16);
|
||
|
||
if ((clear_bv & X86_XSTATE_BNDCFG))
|
||
for (i = I387_BNDCFGU_REGNUM (tdep);
|
||
i < I387_MPXEND_REGNUM (tdep); i++)
|
||
memset (XSAVE_MPX_ADDR (tdep, regs, i), 0, 8);
|
||
|
||
if ((clear_bv & X86_XSTATE_ZMM_H))
|
||
for (i = I387_ZMM0H_REGNUM (tdep); i < zmm_endlo_regnum; i++)
|
||
memset (XSAVE_AVX512_ZMM_H_ADDR (tdep, regs, i), 0, 32);
|
||
|
||
if ((clear_bv & X86_XSTATE_K))
|
||
for (i = I387_K0_REGNUM (tdep);
|
||
i < I387_KEND_REGNUM (tdep); i++)
|
||
memset (XSAVE_AVX512_K_ADDR (tdep, regs, i), 0, 8);
|
||
|
||
if ((clear_bv & X86_XSTATE_ZMM))
|
||
{
|
||
for (i = zmm_endlo_regnum; i < I387_ZMMENDH_REGNUM (tdep); i++)
|
||
memset (XSAVE_AVX512_ZMM_H_ADDR (tdep, regs, i), 0, 32);
|
||
for (i = I387_YMM16H_REGNUM (tdep);
|
||
i < I387_YMMH_AVX512_END_REGNUM (tdep); i++)
|
||
memset (XSAVE_YMM_AVX512_ADDR (tdep, regs, i), 0, 16);
|
||
for (i = I387_XMM16_REGNUM (tdep);
|
||
i < I387_XMM_AVX512_END_REGNUM (tdep); i++)
|
||
memset (XSAVE_XMM_AVX512_ADDR (tdep, regs, i), 0, 16);
|
||
}
|
||
|
||
if ((clear_bv & X86_XSTATE_AVX))
|
||
for (i = I387_YMM0H_REGNUM (tdep);
|
||
i < I387_YMMENDH_REGNUM (tdep); i++)
|
||
memset (XSAVE_AVXH_ADDR (tdep, regs, i), 0, 16);
|
||
|
||
if ((clear_bv & X86_XSTATE_SSE))
|
||
for (i = I387_XMM0_REGNUM (tdep);
|
||
i < I387_MXCSR_REGNUM (tdep); i++)
|
||
memset (FXSAVE_ADDR (tdep, regs, i), 0, 16);
|
||
|
||
/* The mxcsr register is written into the xsave buffer if either AVX
|
||
or SSE is enabled, so only clear it if both of those features
|
||
require clearing. */
|
||
if ((clear_bv & (X86_XSTATE_AVX | X86_XSTATE_SSE))
|
||
== (X86_XSTATE_AVX | X86_XSTATE_SSE))
|
||
store_unsigned_integer (FXSAVE_MXCSR_ADDR (regs), 2, byte_order,
|
||
I387_MXCSR_INIT_VAL);
|
||
|
||
if ((clear_bv & X86_XSTATE_X87))
|
||
{
|
||
for (i = I387_ST0_REGNUM (tdep);
|
||
i < I387_FCTRL_REGNUM (tdep); i++)
|
||
memset (FXSAVE_ADDR (tdep, regs, i), 0, 10);
|
||
|
||
for (i = I387_FCTRL_REGNUM (tdep);
|
||
i < I387_XMM0_REGNUM (tdep); i++)
|
||
{
|
||
if (i == I387_FCTRL_REGNUM (tdep))
|
||
store_unsigned_integer (FXSAVE_ADDR (tdep, regs, i), 2,
|
||
byte_order, I387_FCTRL_INIT_VAL);
|
||
else
|
||
memset (FXSAVE_ADDR (tdep, regs, i), 0,
|
||
regcache_register_size (regcache, i));
|
||
}
|
||
}
|
||
}
|
||
|
||
if (regclass == all)
|
||
{
|
||
/* Check if any PKEYS registers are changed. */
|
||
if ((tdep->xcr0 & X86_XSTATE_PKRU))
|
||
for (i = I387_PKRU_REGNUM (tdep);
|
||
i < I387_PKEYSEND_REGNUM (tdep); i++)
|
||
{
|
||
regcache->raw_collect (i, raw);
|
||
p = XSAVE_PKEYS_ADDR (tdep, regs, i);
|
||
if (memcmp (raw, p, 4) != 0)
|
||
{
|
||
xstate_bv |= X86_XSTATE_PKRU;
|
||
memcpy (p, raw, 4);
|
||
}
|
||
}
|
||
|
||
/* Check if any ZMMH registers are changed. */
|
||
if ((tdep->xcr0 & (X86_XSTATE_ZMM_H | X86_XSTATE_ZMM)))
|
||
for (i = I387_ZMM0H_REGNUM (tdep);
|
||
i < I387_ZMMENDH_REGNUM (tdep); i++)
|
||
{
|
||
regcache->raw_collect (i, raw);
|
||
p = XSAVE_AVX512_ZMM_H_ADDR (tdep, regs, i);
|
||
if (memcmp (raw, p, 32) != 0)
|
||
{
|
||
xstate_bv |= (X86_XSTATE_ZMM_H | X86_XSTATE_ZMM);
|
||
memcpy (p, raw, 32);
|
||
}
|
||
}
|
||
|
||
/* Check if any K registers are changed. */
|
||
if ((tdep->xcr0 & X86_XSTATE_K))
|
||
for (i = I387_K0_REGNUM (tdep);
|
||
i < I387_KEND_REGNUM (tdep); i++)
|
||
{
|
||
regcache->raw_collect (i, raw);
|
||
p = XSAVE_AVX512_K_ADDR (tdep, regs, i);
|
||
if (memcmp (raw, p, 8) != 0)
|
||
{
|
||
xstate_bv |= X86_XSTATE_K;
|
||
memcpy (p, raw, 8);
|
||
}
|
||
}
|
||
|
||
/* Check if any XMM or upper YMM registers are changed. */
|
||
if ((tdep->xcr0 & X86_XSTATE_ZMM))
|
||
{
|
||
for (i = I387_YMM16H_REGNUM (tdep);
|
||
i < I387_YMMH_AVX512_END_REGNUM (tdep); i++)
|
||
{
|
||
regcache->raw_collect (i, raw);
|
||
p = XSAVE_YMM_AVX512_ADDR (tdep, regs, i);
|
||
if (memcmp (raw, p, 16) != 0)
|
||
{
|
||
xstate_bv |= X86_XSTATE_ZMM;
|
||
memcpy (p, raw, 16);
|
||
}
|
||
}
|
||
for (i = I387_XMM16_REGNUM (tdep);
|
||
i < I387_XMM_AVX512_END_REGNUM (tdep); i++)
|
||
{
|
||
regcache->raw_collect (i, raw);
|
||
p = XSAVE_XMM_AVX512_ADDR (tdep, regs, i);
|
||
if (memcmp (raw, p, 16) != 0)
|
||
{
|
||
xstate_bv |= X86_XSTATE_ZMM;
|
||
memcpy (p, raw, 16);
|
||
}
|
||
}
|
||
}
|
||
|
||
/* Check if any upper MPX registers are changed. */
|
||
if ((tdep->xcr0 & X86_XSTATE_BNDREGS))
|
||
for (i = I387_BND0R_REGNUM (tdep);
|
||
i < I387_BNDCFGU_REGNUM (tdep); i++)
|
||
{
|
||
regcache->raw_collect (i, raw);
|
||
p = XSAVE_MPX_ADDR (tdep, regs, i);
|
||
if (memcmp (raw, p, 16))
|
||
{
|
||
xstate_bv |= X86_XSTATE_BNDREGS;
|
||
memcpy (p, raw, 16);
|
||
}
|
||
}
|
||
|
||
/* Check if any upper MPX registers are changed. */
|
||
if ((tdep->xcr0 & X86_XSTATE_BNDCFG))
|
||
for (i = I387_BNDCFGU_REGNUM (tdep);
|
||
i < I387_MPXEND_REGNUM (tdep); i++)
|
||
{
|
||
regcache->raw_collect (i, raw);
|
||
p = XSAVE_MPX_ADDR (tdep, regs, i);
|
||
if (memcmp (raw, p, 8))
|
||
{
|
||
xstate_bv |= X86_XSTATE_BNDCFG;
|
||
memcpy (p, raw, 8);
|
||
}
|
||
}
|
||
|
||
/* Check if any upper YMM registers are changed. */
|
||
if ((tdep->xcr0 & X86_XSTATE_AVX))
|
||
for (i = I387_YMM0H_REGNUM (tdep);
|
||
i < I387_YMMENDH_REGNUM (tdep); i++)
|
||
{
|
||
regcache->raw_collect (i, raw);
|
||
p = XSAVE_AVXH_ADDR (tdep, regs, i);
|
||
if (memcmp (raw, p, 16))
|
||
{
|
||
xstate_bv |= X86_XSTATE_AVX;
|
||
memcpy (p, raw, 16);
|
||
}
|
||
}
|
||
|
||
/* Check if any SSE registers are changed. */
|
||
if ((tdep->xcr0 & X86_XSTATE_SSE))
|
||
for (i = I387_XMM0_REGNUM (tdep);
|
||
i < I387_MXCSR_REGNUM (tdep); i++)
|
||
{
|
||
regcache->raw_collect (i, raw);
|
||
p = FXSAVE_ADDR (tdep, regs, i);
|
||
if (memcmp (raw, p, 16))
|
||
{
|
||
xstate_bv |= X86_XSTATE_SSE;
|
||
memcpy (p, raw, 16);
|
||
}
|
||
}
|
||
|
||
if ((tdep->xcr0 & X86_XSTATE_AVX) || (tdep->xcr0 & X86_XSTATE_SSE))
|
||
{
|
||
i = I387_MXCSR_REGNUM (tdep);
|
||
regcache->raw_collect (i, raw);
|
||
p = FXSAVE_MXCSR_ADDR (regs);
|
||
if (memcmp (raw, p, 4))
|
||
{
|
||
/* Now, we need to mark one of either SSE of AVX as enabled.
|
||
We could pick either. What we do is check to see if one
|
||
of the features is already enabled, if it is then we leave
|
||
it at that, otherwise we pick SSE. */
|
||
if ((xstate_bv & (X86_XSTATE_SSE | X86_XSTATE_AVX)) == 0)
|
||
xstate_bv |= X86_XSTATE_SSE;
|
||
memcpy (p, raw, 4);
|
||
}
|
||
}
|
||
|
||
/* Check if any X87 registers are changed. Only the non-control
|
||
registers are handled here, the control registers are all handled
|
||
later on in this function. */
|
||
if ((tdep->xcr0 & X86_XSTATE_X87))
|
||
for (i = I387_ST0_REGNUM (tdep);
|
||
i < I387_FCTRL_REGNUM (tdep); i++)
|
||
{
|
||
regcache->raw_collect (i, raw);
|
||
p = FXSAVE_ADDR (tdep, regs, i);
|
||
if (memcmp (raw, p, 10))
|
||
{
|
||
xstate_bv |= X86_XSTATE_X87;
|
||
memcpy (p, raw, 10);
|
||
}
|
||
}
|
||
}
|
||
else
|
||
{
|
||
/* Check if REGNUM is changed. */
|
||
regcache->raw_collect (regnum, raw);
|
||
|
||
switch (regclass)
|
||
{
|
||
default:
|
||
internal_error (__FILE__, __LINE__,
|
||
_("invalid i387 regclass"));
|
||
|
||
case pkeys:
|
||
/* This is a PKEYS register. */
|
||
p = XSAVE_PKEYS_ADDR (tdep, regs, regnum);
|
||
if (memcmp (raw, p, 4) != 0)
|
||
{
|
||
xstate_bv |= X86_XSTATE_PKRU;
|
||
memcpy (p, raw, 4);
|
||
}
|
||
break;
|
||
|
||
case avx512_zmm_h:
|
||
/* This is a ZMM register. */
|
||
p = XSAVE_AVX512_ZMM_H_ADDR (tdep, regs, regnum);
|
||
if (memcmp (raw, p, 32) != 0)
|
||
{
|
||
xstate_bv |= (X86_XSTATE_ZMM_H | X86_XSTATE_ZMM);
|
||
memcpy (p, raw, 32);
|
||
}
|
||
break;
|
||
case avx512_k:
|
||
/* This is a AVX512 mask register. */
|
||
p = XSAVE_AVX512_K_ADDR (tdep, regs, regnum);
|
||
if (memcmp (raw, p, 8) != 0)
|
||
{
|
||
xstate_bv |= X86_XSTATE_K;
|
||
memcpy (p, raw, 8);
|
||
}
|
||
break;
|
||
|
||
case avx512_ymmh_avx512:
|
||
/* This is an upper YMM16-31 register. */
|
||
p = XSAVE_YMM_AVX512_ADDR (tdep, regs, regnum);
|
||
if (memcmp (raw, p, 16) != 0)
|
||
{
|
||
xstate_bv |= X86_XSTATE_ZMM;
|
||
memcpy (p, raw, 16);
|
||
}
|
||
break;
|
||
|
||
case avx512_xmm_avx512:
|
||
/* This is an upper XMM16-31 register. */
|
||
p = XSAVE_XMM_AVX512_ADDR (tdep, regs, regnum);
|
||
if (memcmp (raw, p, 16) != 0)
|
||
{
|
||
xstate_bv |= X86_XSTATE_ZMM;
|
||
memcpy (p, raw, 16);
|
||
}
|
||
break;
|
||
|
||
case avxh:
|
||
/* This is an upper YMM register. */
|
||
p = XSAVE_AVXH_ADDR (tdep, regs, regnum);
|
||
if (memcmp (raw, p, 16))
|
||
{
|
||
xstate_bv |= X86_XSTATE_AVX;
|
||
memcpy (p, raw, 16);
|
||
}
|
||
break;
|
||
|
||
case mpx:
|
||
if (regnum < I387_BNDCFGU_REGNUM (tdep))
|
||
{
|
||
regcache->raw_collect (regnum, raw);
|
||
p = XSAVE_MPX_ADDR (tdep, regs, regnum);
|
||
if (memcmp (raw, p, 16))
|
||
{
|
||
xstate_bv |= X86_XSTATE_BNDREGS;
|
||
memcpy (p, raw, 16);
|
||
}
|
||
}
|
||
else
|
||
{
|
||
p = XSAVE_MPX_ADDR (tdep, regs, regnum);
|
||
xstate_bv |= X86_XSTATE_BNDCFG;
|
||
memcpy (p, raw, 8);
|
||
}
|
||
break;
|
||
|
||
case sse:
|
||
/* This is an SSE register. */
|
||
p = FXSAVE_ADDR (tdep, regs, regnum);
|
||
if (memcmp (raw, p, 16))
|
||
{
|
||
xstate_bv |= X86_XSTATE_SSE;
|
||
memcpy (p, raw, 16);
|
||
}
|
||
break;
|
||
|
||
case x87:
|
||
/* This is an x87 register. */
|
||
p = FXSAVE_ADDR (tdep, regs, regnum);
|
||
if (memcmp (raw, p, 10))
|
||
{
|
||
xstate_bv |= X86_XSTATE_X87;
|
||
memcpy (p, raw, 10);
|
||
}
|
||
break;
|
||
|
||
case x87_ctrl_or_mxcsr:
|
||
/* We only handle MXCSR here. All other x87 control registers
|
||
are handled separately below. */
|
||
if (regnum == I387_MXCSR_REGNUM (tdep))
|
||
{
|
||
p = FXSAVE_MXCSR_ADDR (regs);
|
||
if (memcmp (raw, p, 2))
|
||
{
|
||
/* We're only setting MXCSR, so check the initial state
|
||
to see if either of AVX or SSE are already enabled.
|
||
If they are then we'll attribute this changed MXCSR to
|
||
that feature. If neither feature is enabled, then
|
||
we'll attribute this change to the SSE feature. */
|
||
xstate_bv |= (initial_xstate_bv
|
||
& (X86_XSTATE_AVX | X86_XSTATE_SSE));
|
||
if ((xstate_bv & (X86_XSTATE_AVX | X86_XSTATE_SSE)) == 0)
|
||
xstate_bv |= X86_XSTATE_SSE;
|
||
memcpy (p, raw, 2);
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
/* Only handle x87 control registers. */
|
||
for (i = I387_FCTRL_REGNUM (tdep); i < I387_XMM0_REGNUM (tdep); i++)
|
||
if (regnum == -1 || regnum == i)
|
||
{
|
||
/* Most of the FPU control registers occupy only 16 bits in
|
||
the xsave extended state. Give those a special treatment. */
|
||
if (i != I387_FIOFF_REGNUM (tdep)
|
||
&& i != I387_FOOFF_REGNUM (tdep))
|
||
{
|
||
gdb_byte buf[4];
|
||
|
||
regcache->raw_collect (i, buf);
|
||
|
||
if (i == I387_FOP_REGNUM (tdep))
|
||
{
|
||
/* The opcode occupies only 11 bits. Make sure we
|
||
don't touch the other bits. */
|
||
buf[1] &= ((1 << 3) - 1);
|
||
buf[1] |= ((FXSAVE_ADDR (tdep, regs, i))[1] & ~((1 << 3) - 1));
|
||
}
|
||
else if (i == I387_FTAG_REGNUM (tdep))
|
||
{
|
||
/* Converting back is much easier. */
|
||
|
||
unsigned short ftag;
|
||
int fpreg;
|
||
|
||
ftag = (buf[1] << 8) | buf[0];
|
||
buf[0] = 0;
|
||
buf[1] = 0;
|
||
|
||
for (fpreg = 7; fpreg >= 0; fpreg--)
|
||
{
|
||
int tag = (ftag >> (fpreg * 2)) & 3;
|
||
|
||
if (tag != 3)
|
||
buf[0] |= (1 << fpreg);
|
||
}
|
||
}
|
||
p = FXSAVE_ADDR (tdep, regs, i);
|
||
if (memcmp (p, buf, 2))
|
||
{
|
||
xstate_bv |= X86_XSTATE_X87;
|
||
memcpy (p, buf, 2);
|
||
}
|
||
}
|
||
else
|
||
{
|
||
int regsize;
|
||
|
||
regcache->raw_collect (i, raw);
|
||
regsize = regcache_register_size (regcache, i);
|
||
p = FXSAVE_ADDR (tdep, regs, i);
|
||
if (memcmp (raw, p, regsize))
|
||
{
|
||
xstate_bv |= X86_XSTATE_X87;
|
||
memcpy (p, raw, regsize);
|
||
}
|
||
}
|
||
}
|
||
|
||
/* Update the corresponding bits in `xstate_bv' if any
|
||
registers are changed. */
|
||
if (xstate_bv)
|
||
{
|
||
/* The supported bits in `xstat_bv' are 8 bytes. */
|
||
initial_xstate_bv |= xstate_bv;
|
||
store_unsigned_integer (XSAVE_XSTATE_BV_ADDR (regs),
|
||
8, byte_order,
|
||
initial_xstate_bv);
|
||
}
|
||
}
|
||
|
||
/* Recreate the FTW (tag word) valid bits from the 80-bit FP data in
|
||
*RAW. */
|
||
|
||
static int
|
||
i387_tag (const gdb_byte *raw)
|
||
{
|
||
int integer;
|
||
unsigned int exponent;
|
||
unsigned long fraction[2];
|
||
|
||
integer = raw[7] & 0x80;
|
||
exponent = (((raw[9] & 0x7f) << 8) | raw[8]);
|
||
fraction[0] = ((raw[3] << 24) | (raw[2] << 16) | (raw[1] << 8) | raw[0]);
|
||
fraction[1] = (((raw[7] & 0x7f) << 24) | (raw[6] << 16)
|
||
| (raw[5] << 8) | raw[4]);
|
||
|
||
if (exponent == 0x7fff)
|
||
{
|
||
/* Special. */
|
||
return (2);
|
||
}
|
||
else if (exponent == 0x0000)
|
||
{
|
||
if (fraction[0] == 0x0000 && fraction[1] == 0x0000 && !integer)
|
||
{
|
||
/* Zero. */
|
||
return (1);
|
||
}
|
||
else
|
||
{
|
||
/* Special. */
|
||
return (2);
|
||
}
|
||
}
|
||
else
|
||
{
|
||
if (integer)
|
||
{
|
||
/* Valid. */
|
||
return (0);
|
||
}
|
||
else
|
||
{
|
||
/* Special. */
|
||
return (2);
|
||
}
|
||
}
|
||
}
|
||
|
||
/* Prepare the FPU stack in REGCACHE for a function return. */
|
||
|
||
void
|
||
i387_return_value (struct gdbarch *gdbarch, struct regcache *regcache)
|
||
{
|
||
i386_gdbarch_tdep *tdep = gdbarch_tdep<i386_gdbarch_tdep> (gdbarch);
|
||
ULONGEST fstat;
|
||
|
||
/* Set the top of the floating-point register stack to 7. The
|
||
actual value doesn't really matter, but 7 is what a normal
|
||
function return would end up with if the program started out with
|
||
a freshly initialized FPU. */
|
||
regcache_raw_read_unsigned (regcache, I387_FSTAT_REGNUM (tdep), &fstat);
|
||
fstat |= (7 << 11);
|
||
regcache_raw_write_unsigned (regcache, I387_FSTAT_REGNUM (tdep), fstat);
|
||
|
||
/* Mark %st(1) through %st(7) as empty. Since we set the top of the
|
||
floating-point register stack to 7, the appropriate value for the
|
||
tag word is 0x3fff. */
|
||
regcache_raw_write_unsigned (regcache, I387_FTAG_REGNUM (tdep), 0x3fff);
|
||
|
||
}
|
||
|
||
/* See i387-tdep.h. */
|
||
|
||
void
|
||
i387_reset_bnd_regs (struct gdbarch *gdbarch, struct regcache *regcache)
|
||
{
|
||
i386_gdbarch_tdep *tdep = gdbarch_tdep<i386_gdbarch_tdep> (gdbarch);
|
||
|
||
if (I387_BND0R_REGNUM (tdep) > 0)
|
||
{
|
||
gdb_byte bnd_buf[16];
|
||
|
||
memset (bnd_buf, 0, 16);
|
||
for (int i = 0; i < I387_NUM_BND_REGS; i++)
|
||
regcache->raw_write (I387_BND0R_REGNUM (tdep) + i, bnd_buf);
|
||
}
|
||
}
|