2
0
mirror of https://sourceware.org/git/binutils-gdb.git synced 2024-12-21 04:42:53 +08:00
binutils-gdb/zlib/inflate.h
Nick Clifton de1ab01e8e Sync zlib sources with GCC, upgrading to 1.2.10.
Changes in 1.2.10 (2 Jan 2017)
- Avoid warnings on snprintf() return value
- Fix bug in deflate_stored() for zero-length input
- Fix bug in gzwrite.c that produced corrupt gzip files
- Remove files to be installed before copying them in Makefile.in
- Add warnings when compiling with assembler code

Changes in 1.2.9 (31 Dec 2016)
- Fix contrib/minizip to permit unzipping with desktop API [Zouzou]
- Improve contrib/blast to return unused bytes
- Assure that gzoffset() is correct when appending
- Improve compress() and uncompress() to support large lengths
- Fix bug in test/example.c where error code not saved
- Remedy Coverity warning [Randers-Pehrson]
- Improve speed of gzprintf() in transparent mode
- Fix inflateInit2() bug when windowBits is 16 or 32
- Change DEBUG macro to ZLIB_DEBUG
- Avoid uninitialized access by gzclose_w()
- Allow building zlib outside of the source directory
- Fix bug that accepted invalid zlib header when windowBits is zero
- Fix gzseek() problem on MinGW due to buggy _lseeki64 there
- Loop on write() calls in gzwrite.c in case of non-blocking I/O
- Add --warn (-w) option to ./configure for more compiler warnings
- Reject a window size of 256 bytes if not using the zlib wrapper
- Fix bug when level 0 used with Z_HUFFMAN or Z_RLE
- Add --debug (-d) option to ./configure to define ZLIB_DEBUG
- Fix bugs in creating a very large gzip header
- Add uncompress2() function, which returns the input size used
- Assure that deflateParams() will not switch functions mid-block
- Dramatically speed up deflation for level 0 (storing)
- Add gzfread(), duplicating the interface of fread()
- Add gzfwrite(), duplicating the interface of fwrite()
- Add deflateGetDictionary() function
- Use snprintf() for later versions of Microsoft C
- Fix *Init macros to use z_ prefix when requested
- Replace as400 with os400 for OS/400 support [Monnerat]
- Add crc32_z() and adler32_z() functions with size_t lengths
- Update Visual Studio project files [AraHaan]
2017-01-20 10:17:42 +00:00

126 lines
6.5 KiB
C

/* inflate.h -- internal inflate state definition
* Copyright (C) 1995-2016 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* WARNING: this file should *not* be used by applications. It is
part of the implementation of the compression library and is
subject to change. Applications should only use zlib.h.
*/
/* define NO_GZIP when compiling if you want to disable gzip header and
trailer decoding by inflate(). NO_GZIP would be used to avoid linking in
the crc code when it is not needed. For shared libraries, gzip decoding
should be left enabled. */
#ifndef NO_GZIP
# define GUNZIP
#endif
/* Possible inflate modes between inflate() calls */
typedef enum {
HEAD = 16180, /* i: waiting for magic header */
FLAGS, /* i: waiting for method and flags (gzip) */
TIME, /* i: waiting for modification time (gzip) */
OS, /* i: waiting for extra flags and operating system (gzip) */
EXLEN, /* i: waiting for extra length (gzip) */
EXTRA, /* i: waiting for extra bytes (gzip) */
NAME, /* i: waiting for end of file name (gzip) */
COMMENT, /* i: waiting for end of comment (gzip) */
HCRC, /* i: waiting for header crc (gzip) */
DICTID, /* i: waiting for dictionary check value */
DICT, /* waiting for inflateSetDictionary() call */
TYPE, /* i: waiting for type bits, including last-flag bit */
TYPEDO, /* i: same, but skip check to exit inflate on new block */
STORED, /* i: waiting for stored size (length and complement) */
COPY_, /* i/o: same as COPY below, but only first time in */
COPY, /* i/o: waiting for input or output to copy stored block */
TABLE, /* i: waiting for dynamic block table lengths */
LENLENS, /* i: waiting for code length code lengths */
CODELENS, /* i: waiting for length/lit and distance code lengths */
LEN_, /* i: same as LEN below, but only first time in */
LEN, /* i: waiting for length/lit/eob code */
LENEXT, /* i: waiting for length extra bits */
DIST, /* i: waiting for distance code */
DISTEXT, /* i: waiting for distance extra bits */
MATCH, /* o: waiting for output space to copy string */
LIT, /* o: waiting for output space to write literal */
CHECK, /* i: waiting for 32-bit check value */
LENGTH, /* i: waiting for 32-bit length (gzip) */
DONE, /* finished check, done -- remain here until reset */
BAD, /* got a data error -- remain here until reset */
MEM, /* got an inflate() memory error -- remain here until reset */
SYNC /* looking for synchronization bytes to restart inflate() */
} inflate_mode;
/*
State transitions between above modes -
(most modes can go to BAD or MEM on error -- not shown for clarity)
Process header:
HEAD -> (gzip) or (zlib) or (raw)
(gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME -> COMMENT ->
HCRC -> TYPE
(zlib) -> DICTID or TYPE
DICTID -> DICT -> TYPE
(raw) -> TYPEDO
Read deflate blocks:
TYPE -> TYPEDO -> STORED or TABLE or LEN_ or CHECK
STORED -> COPY_ -> COPY -> TYPE
TABLE -> LENLENS -> CODELENS -> LEN_
LEN_ -> LEN
Read deflate codes in fixed or dynamic block:
LEN -> LENEXT or LIT or TYPE
LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
LIT -> LEN
Process trailer:
CHECK -> LENGTH -> DONE
*/
/* State maintained between inflate() calls -- approximately 7K bytes, not
including the allocated sliding window, which is up to 32K bytes. */
struct inflate_state {
z_streamp strm; /* pointer back to this zlib stream */
inflate_mode mode; /* current inflate mode */
int last; /* true if processing last block */
int wrap; /* bit 0 true for zlib, bit 1 true for gzip,
bit 2 true to validate check value */
int havedict; /* true if dictionary provided */
int flags; /* gzip header method and flags (0 if zlib) */
unsigned dmax; /* zlib header max distance (INFLATE_STRICT) */
unsigned long check; /* protected copy of check value */
unsigned long total; /* protected copy of output count */
gz_headerp head; /* where to save gzip header information */
/* sliding window */
unsigned wbits; /* log base 2 of requested window size */
unsigned wsize; /* window size or zero if not using window */
unsigned whave; /* valid bytes in the window */
unsigned wnext; /* window write index */
unsigned char FAR *window; /* allocated sliding window, if needed */
/* bit accumulator */
unsigned long hold; /* input bit accumulator */
unsigned bits; /* number of bits in "in" */
/* for string and stored block copying */
unsigned length; /* literal or length of data to copy */
unsigned offset; /* distance back to copy string from */
/* for table and code decoding */
unsigned extra; /* extra bits needed */
/* fixed and dynamic code tables */
code const FAR *lencode; /* starting table for length/literal codes */
code const FAR *distcode; /* starting table for distance codes */
unsigned lenbits; /* index bits for lencode */
unsigned distbits; /* index bits for distcode */
/* dynamic table building */
unsigned ncode; /* number of code length code lengths */
unsigned nlen; /* number of length code lengths */
unsigned ndist; /* number of distance code lengths */
unsigned have; /* number of code lengths in lens[] */
code FAR *next; /* next available space in codes[] */
unsigned short lens[320]; /* temporary storage for code lengths */
unsigned short work[288]; /* work area for code table building */
code codes[ENOUGH]; /* space for code tables */
int sane; /* if false, allow invalid distance too far */
int back; /* bits back of last unprocessed length/lit */
unsigned was; /* initial length of match */
};