2
0
mirror of https://sourceware.org/git/binutils-gdb.git synced 2024-12-21 04:42:53 +08:00
binutils-gdb/gnulib/import/memchr.c
Tom Tromey 73cc72729a Move gnulib to top level
This patch moves the gdb/gnulib subdirectory to the top level.

It adjusts the top-level build system to build gnulib when necessary,
and changes gdb to use this.  However, gdbserver still builds its own
copy of gnulib, just from the new source location.

A small hack was needed to ensure that gnulib is only built when gdb
is enabled.  The Makefile only provides an ordering -- the directory
must be mentioned in configdirs to actually be compiled at all.

Most of the patch is just a "git mv" of gnulib, though a few minor
path adjustments were needed in some files there.

Tested by the buildbot.

ChangeLog
2019-06-14  Tom Tromey  <tom@tromey.com>

	* MAINTAINERS: Add gnulib.
	* gnulib: New directory, move from gdb/gnulib.
	* configure.ac (host_libs): Add gnulib.
	* configure: Rebuild.
	* Makefile.def (host_modules, dependencies): Add gnulib.
	* Makefile.in: Rebuild.

gdb/ChangeLog
2019-06-14  Tom Tromey  <tom@tromey.com>

	* gnulib: Move directory to top-level.
	* configure.ac: Don't configure gnulib.
	* configure: Rebuild.
	* common/common-defs.h: Use new path to gnulib.
	* Makefile.in (GNULIB_BUILDDIR): Now ../gnulib.
	(GNULIB_H): Remove.
	(INCGNU): Look in new gnulib location.
	(HFILES_NO_SRCDIR): Remove gnulib files.
	(SUBDIR, REQUIRED_SUBDIRS): Remove gnulib.
	(generated_files): Remove GNULIB_H.
	($(LIBGNU), all-lib): Remove targets.
	(distclean): Don't mention GNULIB_BUILDDIR.
	($(GNULIB_BUILDDIR)/Makefile): Remove target.

gdb/gdbserver/ChangeLog
2019-06-14  Tom Tromey  <tom@tromey.com>

	* configure.ac: Use new path to gnulib.
	* configure: Rebuild.
	* Makefile.in (INCGNU, $(GNULIB_BUILDDIR)/Makefile): Use new path
	to gnulib.

gnulib/ChangeLog
2019-06-14  Tom Tromey  <tom@tromey.com>

	* update-gnulib.sh: Adjust paths.
	* Makefile.in: Adjust paths.
	* configure.ac: Adjust paths.  Use ACX_LARGEFILE.
	* configure: Rebuild.
2019-06-14 12:40:02 -06:00

173 lines
5.7 KiB
C

/* Copyright (C) 1991, 1993, 1996-1997, 1999-2000, 2003-2004, 2006, 2008-2016
Free Software Foundation, Inc.
Based on strlen implementation by Torbjorn Granlund (tege@sics.se),
with help from Dan Sahlin (dan@sics.se) and
commentary by Jim Blandy (jimb@ai.mit.edu);
adaptation to memchr suggested by Dick Karpinski (dick@cca.ucsf.edu),
and implemented by Roland McGrath (roland@ai.mit.edu).
NOTE: The canonical source of this file is maintained with the GNU C Library.
Bugs can be reported to bug-glibc@prep.ai.mit.edu.
This program is free software: you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 3 of the License, or any
later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#ifndef _LIBC
# include <config.h>
#endif
#include <string.h>
#include <stddef.h>
#if defined _LIBC
# include <memcopy.h>
#else
# define reg_char char
#endif
#include <limits.h>
#if HAVE_BP_SYM_H || defined _LIBC
# include <bp-sym.h>
#else
# define BP_SYM(sym) sym
#endif
#undef __memchr
#ifdef _LIBC
# undef memchr
#endif
#ifndef weak_alias
# define __memchr memchr
#endif
/* Search no more than N bytes of S for C. */
void *
__memchr (void const *s, int c_in, size_t n)
{
/* On 32-bit hardware, choosing longword to be a 32-bit unsigned
long instead of a 64-bit uintmax_t tends to give better
performance. On 64-bit hardware, unsigned long is generally 64
bits already. Change this typedef to experiment with
performance. */
typedef unsigned long int longword;
const unsigned char *char_ptr;
const longword *longword_ptr;
longword repeated_one;
longword repeated_c;
unsigned reg_char c;
c = (unsigned char) c_in;
/* Handle the first few bytes by reading one byte at a time.
Do this until CHAR_PTR is aligned on a longword boundary. */
for (char_ptr = (const unsigned char *) s;
n > 0 && (size_t) char_ptr % sizeof (longword) != 0;
--n, ++char_ptr)
if (*char_ptr == c)
return (void *) char_ptr;
longword_ptr = (const longword *) char_ptr;
/* All these elucidatory comments refer to 4-byte longwords,
but the theory applies equally well to any size longwords. */
/* Compute auxiliary longword values:
repeated_one is a value which has a 1 in every byte.
repeated_c has c in every byte. */
repeated_one = 0x01010101;
repeated_c = c | (c << 8);
repeated_c |= repeated_c << 16;
if (0xffffffffU < (longword) -1)
{
repeated_one |= repeated_one << 31 << 1;
repeated_c |= repeated_c << 31 << 1;
if (8 < sizeof (longword))
{
size_t i;
for (i = 64; i < sizeof (longword) * 8; i *= 2)
{
repeated_one |= repeated_one << i;
repeated_c |= repeated_c << i;
}
}
}
/* Instead of the traditional loop which tests each byte, we will test a
longword at a time. The tricky part is testing if *any of the four*
bytes in the longword in question are equal to c. We first use an xor
with repeated_c. This reduces the task to testing whether *any of the
four* bytes in longword1 is zero.
We compute tmp =
((longword1 - repeated_one) & ~longword1) & (repeated_one << 7).
That is, we perform the following operations:
1. Subtract repeated_one.
2. & ~longword1.
3. & a mask consisting of 0x80 in every byte.
Consider what happens in each byte:
- If a byte of longword1 is zero, step 1 and 2 transform it into 0xff,
and step 3 transforms it into 0x80. A carry can also be propagated
to more significant bytes.
- If a byte of longword1 is nonzero, let its lowest 1 bit be at
position k (0 <= k <= 7); so the lowest k bits are 0. After step 1,
the byte ends in a single bit of value 0 and k bits of value 1.
After step 2, the result is just k bits of value 1: 2^k - 1. After
step 3, the result is 0. And no carry is produced.
So, if longword1 has only non-zero bytes, tmp is zero.
Whereas if longword1 has a zero byte, call j the position of the least
significant zero byte. Then the result has a zero at positions 0, ...,
j-1 and a 0x80 at position j. We cannot predict the result at the more
significant bytes (positions j+1..3), but it does not matter since we
already have a non-zero bit at position 8*j+7.
So, the test whether any byte in longword1 is zero is equivalent to
testing whether tmp is nonzero. */
while (n >= sizeof (longword))
{
longword longword1 = *longword_ptr ^ repeated_c;
if ((((longword1 - repeated_one) & ~longword1)
& (repeated_one << 7)) != 0)
break;
longword_ptr++;
n -= sizeof (longword);
}
char_ptr = (const unsigned char *) longword_ptr;
/* At this point, we know that either n < sizeof (longword), or one of the
sizeof (longword) bytes starting at char_ptr is == c. On little-endian
machines, we could determine the first such byte without any further
memory accesses, just by looking at the tmp result from the last loop
iteration. But this does not work on big-endian machines. Choose code
that works in both cases. */
for (; n > 0; --n, ++char_ptr)
{
if (*char_ptr == c)
return (void *) char_ptr;
}
return NULL;
}
#ifdef weak_alias
weak_alias (__memchr, BP_SYM (memchr))
#endif