mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-15 04:31:49 +08:00
73cc72729a
This patch moves the gdb/gnulib subdirectory to the top level. It adjusts the top-level build system to build gnulib when necessary, and changes gdb to use this. However, gdbserver still builds its own copy of gnulib, just from the new source location. A small hack was needed to ensure that gnulib is only built when gdb is enabled. The Makefile only provides an ordering -- the directory must be mentioned in configdirs to actually be compiled at all. Most of the patch is just a "git mv" of gnulib, though a few minor path adjustments were needed in some files there. Tested by the buildbot. ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * MAINTAINERS: Add gnulib. * gnulib: New directory, move from gdb/gnulib. * configure.ac (host_libs): Add gnulib. * configure: Rebuild. * Makefile.def (host_modules, dependencies): Add gnulib. * Makefile.in: Rebuild. gdb/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * gnulib: Move directory to top-level. * configure.ac: Don't configure gnulib. * configure: Rebuild. * common/common-defs.h: Use new path to gnulib. * Makefile.in (GNULIB_BUILDDIR): Now ../gnulib. (GNULIB_H): Remove. (INCGNU): Look in new gnulib location. (HFILES_NO_SRCDIR): Remove gnulib files. (SUBDIR, REQUIRED_SUBDIRS): Remove gnulib. (generated_files): Remove GNULIB_H. ($(LIBGNU), all-lib): Remove targets. (distclean): Don't mention GNULIB_BUILDDIR. ($(GNULIB_BUILDDIR)/Makefile): Remove target. gdb/gdbserver/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * configure.ac: Use new path to gnulib. * configure: Rebuild. * Makefile.in (INCGNU, $(GNULIB_BUILDDIR)/Makefile): Use new path to gnulib. gnulib/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * update-gnulib.sh: Adjust paths. * Makefile.in: Adjust paths. * configure.ac: Adjust paths. Use ACX_LARGEFILE. * configure: Rebuild.
109 lines
4.6 KiB
C
109 lines
4.6 KiB
C
/* Manipulating the FPU control word. -*- coding: utf-8 -*-
|
|
Copyright (C) 2007-2016 Free Software Foundation, Inc.
|
|
Written by Bruno Haible <bruno@clisp.org>, 2007.
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
#ifndef _FPUCW_H
|
|
#define _FPUCW_H
|
|
|
|
/* The i386 floating point hardware (the 387 compatible FPU, not the modern
|
|
SSE/SSE2 hardware) has a controllable rounding precision. It is specified
|
|
through the 'PC' bits in the FPU control word ('fctrl' register). (See
|
|
the GNU libc i386 <fpu_control.h> header for details.)
|
|
|
|
On some platforms, such as Linux or Solaris, the default precision setting
|
|
is set to "extended precision". This means that 'long double' instructions
|
|
operate correctly, but 'double' computations often produce slightly
|
|
different results as on strictly IEEE 754 conforming systems.
|
|
|
|
On some platforms, such as NetBSD, the default precision is set to
|
|
"double precision". This means that 'long double' instructions will operate
|
|
only as 'double', i.e. lead to wrong results. Similarly on FreeBSD 6.4, at
|
|
least for the division of 'long double' numbers.
|
|
|
|
The FPU control word is under control of the application, i.e. it is
|
|
not required to be set either way by the ABI. (In fact, the i386 ABI
|
|
http://refspecs.freestandards.org/elf/abi386-4.pdf page 3-12 = page 38
|
|
is not clear about it. But in any case, gcc treats the control word
|
|
like a "preserved" register: it emits code that assumes that the control
|
|
word is preserved across calls, and it restores the control word at the
|
|
end of functions that modify it.)
|
|
|
|
See Vincent Lefèvre's page http://www.vinc17.org/research/extended.en.html
|
|
for a good explanation.
|
|
See http://www.uwsg.iu.edu/hypermail/linux/kernel/0103.0/0453.html for
|
|
some argumentation which setting should be the default. */
|
|
|
|
/* This header file provides the following facilities:
|
|
fpucw_t integral type holding the value of 'fctrl'
|
|
FPU_PC_MASK bit mask denoting the precision control
|
|
FPU_PC_DOUBLE precision control for 53 bits mantissa
|
|
FPU_PC_EXTENDED precision control for 64 bits mantissa
|
|
GET_FPUCW () yields the current FPU control word
|
|
SET_FPUCW (word) sets the FPU control word
|
|
DECL_LONG_DOUBLE_ROUNDING variable declaration for
|
|
BEGIN/END_LONG_DOUBLE_ROUNDING
|
|
BEGIN_LONG_DOUBLE_ROUNDING () starts a sequence of instructions with
|
|
'long double' safe operation precision
|
|
END_LONG_DOUBLE_ROUNDING () ends a sequence of instructions with
|
|
'long double' safe operation precision
|
|
*/
|
|
|
|
/* Inline assembler like this works only with GNU C. */
|
|
#if (defined __i386__ || defined __x86_64__) && defined __GNUC__
|
|
|
|
typedef unsigned short fpucw_t; /* glibc calls this fpu_control_t */
|
|
|
|
# define FPU_PC_MASK 0x0300
|
|
# define FPU_PC_DOUBLE 0x200 /* glibc calls this _FPU_DOUBLE */
|
|
# define FPU_PC_EXTENDED 0x300 /* glibc calls this _FPU_EXTENDED */
|
|
|
|
# define GET_FPUCW() \
|
|
({ fpucw_t _cw; \
|
|
__asm__ __volatile__ ("fnstcw %0" : "=m" (*&_cw)); \
|
|
_cw; \
|
|
})
|
|
# define SET_FPUCW(word) \
|
|
(void)({ fpucw_t _ncw = (word); \
|
|
__asm__ __volatile__ ("fldcw %0" : : "m" (*&_ncw)); \
|
|
})
|
|
|
|
# define DECL_LONG_DOUBLE_ROUNDING \
|
|
fpucw_t oldcw;
|
|
# define BEGIN_LONG_DOUBLE_ROUNDING() \
|
|
(void)(oldcw = GET_FPUCW (), \
|
|
SET_FPUCW ((oldcw & ~FPU_PC_MASK) | FPU_PC_EXTENDED))
|
|
# define END_LONG_DOUBLE_ROUNDING() \
|
|
SET_FPUCW (oldcw)
|
|
|
|
#else
|
|
|
|
typedef unsigned int fpucw_t;
|
|
|
|
# define FPU_PC_MASK 0
|
|
# define FPU_PC_DOUBLE 0
|
|
# define FPU_PC_EXTENDED 0
|
|
|
|
# define GET_FPUCW() 0
|
|
# define SET_FPUCW(word) (void)(word)
|
|
|
|
# define DECL_LONG_DOUBLE_ROUNDING
|
|
# define BEGIN_LONG_DOUBLE_ROUNDING()
|
|
# define END_LONG_DOUBLE_ROUNDING()
|
|
|
|
#endif
|
|
|
|
#endif /* _FPUCW_H */
|