mirror/binutils-gdb
2
0
Fork 0
mirror of https://sourceware.org/git/binutils-gdb.git synced 2024-11-27 03:51:15 +08:00
Code Issues Packages Projects Releases Wiki Activity
af125b1638
binutils-gdb/gdb/w89k-rom.c
Stu Grossman 7952bce6fc * monitor.c: make_xmodem_packet and print_xmodem_packet go away. 
send_xmodem_packet shows up to do the obvious.  Lots of fixes to
	xmodem downloads including resetting of block number at start of
	new transfers, fix for buffer overrun problem, addition of CRC
	generation code.
	* (monitor_open):  loadtype_str and loadproto_str now default to
	first entry in monitor_ops->loadtypes.
	* (monitor_wait):  Lengthen register dump buf, because of verbose
	Winbond monitor.
	* (monitor_fetch_register):  Report unimplemented registers as 0.
	* (monitor_read_memory):  Only do 16 byte aligned transfers
	because of formatting weirdness with the Winbond monitor.  Also,
	ignore non-hex, non-whitespace formatting between bytes (same
	monitor).
	* (monitor_load):  Clean up logic.
	* (monitor_load_srec):  Re-do xmodem support.  Move lots of it
	into send_xmodem_packet.
	* (getacknak):  Get rid of polls and timeouts.  Handle CRC
	requests from receiver.
	* (monitor_make_srec):  Efficiency improvements.  Don't call
	sprintf to output two digit hex numbers.
	* (crcinit, docrc):  New, CRC-16 support routines.
	* (send_xmodem_packet):  New routine to generate either CRC-16 or
	checksummed xmodem packets.

	* remote-est.c (est_loadtypes), rom68k-rom.c (rom68k_loadtypes):
	Reduce tables down to only the load types supported by each
	monitor.

	* w89k-rom.c  (w89k_supply_register):  Parses output of Winbond
	register dumps.
	* (w89k_loadtypes, w89k_loadprotos):  Reduce to just srec/xmodem.
	* (w89k_cmds):  Add clear all breakpoints, memory fill, and dump
	registers commands.
1995-04-08 01:05:01 +00:00

249 lines
6.6 KiB
C
Raw Blame History

/* Remote target glue for the WinBond ROM monitor running on the "Cougar"
W89k eval board.
Copyright 1988, 1991, 1992, 1993, 1994 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
#include "defs.h"
#include "gdbcore.h"
#include "target.h"
#include "monitor.h"
#include "serial.h"
static void w89k_open PARAMS ((char *args, int from_tty));
/*
* this array of registers need to match the indexes used by GDB. The
* whole reason this exists is cause the various ROM monitors use
* different strings than GDB does, and doesn't support all the
* registers either. So, typing "info reg sp" becomes a "r30".
*/
static char *w89k_regnames[NUM_REGS] =
{
"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
"r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
"r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
"r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
"SAR", "PC", NULL, NULL, NULL, "EIEM", "IIR", "IVA",
"IOR", "IPSW", NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL,
"CCR", NULL, NULL, "TR0", "TR1",
};
static void
w89k_supply_register (regname, regnamelen, val, vallen)
char *regname;
int regnamelen;
char *val;
int vallen;
{
int numregs;
int regno;
numregs = 1;
regno = -1;
if (regnamelen == 2)
switch (regname[0])
{
case 'r':
numregs = 4;
switch (regname[1])
{
case '0':
regno = R0_REGNUM;
break;
case '4':
regno = R0_REGNUM + 4;
break;
case '8':
regno = R0_REGNUM + 8;
break;
}
break;
case 'P':
if (regname[1] == 'C')
regno = PC_REGNUM;
break;
}
else if (regnamelen == 3)
switch (regname[0])
{
case 'r':
numregs = 4;
if (regname[1] == '1' && regname[2] == '2')
regno = R0_REGNUM + 12;
else if (regname[1] == '1' && regname[2] == '6')
regno = R0_REGNUM + 16;
else if (regname[1] == '2' && regname[2] == '0')
regno = R0_REGNUM + 20;
else if (regname[1] == '2' && regname[2] == '4')
regno = R0_REGNUM + 24;
else if (regname[1] == '2' && regname[2] == '8')
regno = R0_REGNUM + 28;
break;
case 'R':
if (regname[1] == 'C' && regname[2] == 'R')
regno = RCR_REGNUM;
break;
case 'C':
if (regname[1] == 'C' && regname[2] == 'R')
regno = CCR_REGNUM;
break;
case 'S':
if (regname[1] == 'A' && regname[2] == 'R')
regno = SAR_REGNUM;
break;
case 'I':
if (regname[1] == 'I' && regname[2] == 'R')
regno = IIR_REGNUM;
else if (regname[1] == 'O' && regname[2] == 'R')
regno = IOR_REGNUM;
break;
case 'T':
numregs = 4;
if (regname[1] == 'R')
if (regname[2] == '0')
regno = TR0_REGNUM;
else if (regname[2] == '4')
regno = TR0_REGNUM + 4;
break;
}
else if (regnamelen == 4)
switch (regname[0])
{
case 'E':
if (regname[1] == 'I')
if (regname[2] == 'E' && regname[3] == 'M')
regno = EIEM_REGNUM;
break;
case 'I':
if (regname[1] == 'P' && regname[2] == 'S' && regname[3] == 'W')
regno = IPSW_REGNUM;
break;
}
else if (regnamelen == 5)
switch (regname[0])
{
case 'I':
if (regname[1] == 'A'
&& regname[2] == 'O'
&& regname[3] == 'Q'
&& regname[4] == 'B')
regno = PCOQ_TAIL_REGNUM;
break;
}
if (regno >= 0)
while (numregs-- > 0)
val = monitor_supply_register (regno++, val);
}
/*
* Define the monitor command strings. Since these are passed directly
* through to a printf style function, we need can include formatting
* strings. We also need a CR or LF on the end.
*/
static struct target_ops w89k_ops;
static char *w89k_loadtypes[] = {"srec", NULL};
static char *w89k_loadprotos[] = {"xmodem", NULL};
static char *w89k_inits[] = {"\r", NULL};
static struct monitor_ops w89k_cmds =
{
MO_GETMEM_NEEDS_RANGE|MO_FILL_USES_ADDR, /* flags */
w89k_inits, /* Init strings */
"g\r", /* continue command */
"t\r", /* single step */
NULL, /* Interrupt char */
"bp %x\r", /* set a breakpoint */
"bc %x\r", /* clear a breakpoint */
"bc *\r", /* clear all breakpoints */
"f %x %x %x\r", /* memory fill cmd */
{
"eb %x %x\r", /* setmem.cmdb (addr, value) */
"eh %x %x\r", /* setmem.cmdw (addr, value) */
"ew %x %x\r", /* setmem.cmdl (addr, value) */
NULL, /* setmem.cmdll (addr, value) */
NULL, /* setreg.resp_delim */
NULL, /* setreg.term */
NULL, /* setreg.term_cmd */
},
{
"db %x %x\r", /* getmem.cmdb (startaddr, endaddr) */
"dh %x %x\r", /* getmem.cmdw (startaddr, endaddr) */
"dw %x %x\r", /* getmem.cmdl (startaddr, endaddr) */
NULL, /* getmem.cmdll (startaddr, endaddr) */
" ", /* getmem.resp_delim */
NULL, /* getmem.term */
NULL, /* getmem.term_cmd */
},
{
"r %s %x\r", /* setreg.cmd (name, value) */
NULL, /* setreg.resp_delim */
NULL, /* setreg.term */
NULL, /* setreg.term_cmd */
},
{
"r %s\r", /* getreg.cmd (name) */
"\r", /* getreg.resp_delim */
NULL, /* getreg.term */
NULL, /* getreg.term_cmd */
},
"r\r", /* dump_registers */
"\\(\\w+\\)\\( +[0-9a-fA-F]+\\b\\)+",
w89k_supply_register, /* supply_register */
"u\r", /* download command */
"u\n\r", /* load response */
"ROM>", /* monitor command prompt */
NULL, /* end-of-command delimitor */
NULL, /* optional command terminator */
&w89k_ops, /* target operations */
w89k_loadtypes, /* loadtypes */
w89k_loadprotos, /* loadprotos */
"9600", /* supported baud rates */
SERIAL_1_STOPBITS, /* number of stop bits */
w89k_regnames, /* register names */
MONITOR_OPS_MAGIC /* magic */
};
void
w89k_open(args, from_tty)
char *args;
int from_tty;
{
monitor_open (args, &w89k_cmds, from_tty);
}
void
_initialize_w89k ()
{
init_monitor_ops (&w89k_ops);
w89k_ops.to_shortname = "w89k";
w89k_ops.to_longname = "WinBond's debug monitor for the W89k Eval board";
w89k_ops.to_doc = "Debug on a WinBond W89K eval board.\n\
Specify the serial device it is connected to (e.g. /dev/ttya).";
w89k_ops.to_open = w89k_open;
add_target (&w89k_ops);
}
Reference in New Issue View Git Blame Copy Permalink