mirror/binutils-gdb
2
0
Fork 0
mirror of https://sourceware.org/git/binutils-gdb.git synced 2024-12-15 04:31:49 +08:00
Code Issues Packages Projects Releases Wiki Activity
ae53ffa4b6
binutils-gdb/gdb/gdbserver/configure.srv
Pedro Alves fa593d66d5 gdb/gdbserver/ 
2010-06-01  Pedro Alves  <pedro@codesourcery.com>
	    Stan Shebs  <stan@codesourcery.com>

	* Makefile.in (IPA_DEPFILES, extra_libraries): New.
	(all): Depend on $(extra_libraries).
	(install-only): Install the IPA.
	(IPA_OBJS, IPA_LIB): New.
	(clean): Remove the IPA lib.
	(IPAGENT_CFLAGS): New.
	(tracepoint-ipa.o, utils-ipa.o, remote-utils-ipa.o)
	(regcache-ipa.o, i386-linux-ipa.o, linux-i386-ipa.o)
	(linux-amd64-ipa.o, amd64-linux-ipa.o): New rules.
	* linux-amd64-ipa.c, linux-i386-ipa.c: New files.
	* configure.ac: Check for atomic builtins support in the compiler.
	(IPA_DEPFILES, extra_libraries): Define.
	* configure.srv (ipa_obj): Add description.
	(ipa_i386_linux_regobj, ipa_amd64_linux_regobj): Define.
	(i[34567]86-*-linux*): Set ipa_obj.
	(x86_64-*-linux*): Set ipa_obj.
	* linux-low.c (stabilizing_threads): New.
	(supports_fast_tracepoints): New.
	(linux_detach): Stabilize threads before detaching.
	(handle_tracepoints): Handle internal tracing breakpoints.  Assert
	the lwp is either not stabilizing, or is moving out of a jump pad.
	(linux_fast_tracepoint_collecting): New.
	(maybe_move_out_of_jump_pad): New.
	(enqueue_one_deferred_signal): New.
	(dequeue_one_deferred_signal): New.
	(linux_wait_for_event_1): If moving out of a jump pad, defer
	pending signals to later.
	(linux_stabilize_threads): New.
	(linux_wait_1): Check if threads need moving out of jump pads, and
	do it if so.
	(stuck_in_jump_pad_callback): New.
	(move_out_of_jump_pad_callback): New.
	(lwp_running): New.
	(linux_resume_one_lwp): Handle moving out of jump pads.
	(linux_set_resume_request): Dequeue deferred signals.
	(need_step_over_p): Also step over fast tracepoint jumps.
	(start_step_over): Also uninsert fast tracepoint jumps.
	(finish_step_over): Also reinsert fast tracepoint jumps.
	(linux_install_fast_tracepoint_jump): New.
	(linux_target_ops): Install linux_stabilize_threads and
	linux_install_fast_tracepoint_jump_pad.
	* linux-low.h (linux_target_ops) <get_thread_area,
	install_fast_tracepoint_jump_pad>: New fields.
	(struct lwp_info) <collecting_fast_tracepoint,
	pending_signals_to_report, exit_jump_pad_bkpt>: New fields.
	(linux_get_thread_area): Declare.
	* linux-x86-low.c (jump_insn): New.
	(x86_get_thread_area): New.
	(append_insns): New.
	(push_opcode): New.
	(amd64_install_fast_tracepoint_jump_pad): New.
	(i386_install_fast_tracepoint_jump_pad): New.
	(x86_install_fast_tracepoint_jump_pad): New.
	(the_low_target): Install x86_get_thread_area and
	x86_install_fast_tracepoint_jump_pad.
	* mem-break.c (set_raw_breakpoint_at): Use read_inferior_memory.
	(struct fast_tracepoint_jump): New.
	(fast_tracepoint_jump_insn): New.
	(fast_tracepoint_jump_shadow): New.
	(find_fast_tracepoint_jump_at): New.
	(fast_tracepoint_jump_here): New.
	(delete_fast_tracepoint_jump): New.
	(set_fast_tracepoint_jump): New.
	(uninsert_fast_tracepoint_jumps_at): New.
	(reinsert_fast_tracepoint_jumps_at): New.
	(set_breakpoint_at): Use write_inferior_memory.
	(uninsert_raw_breakpoint): Use write_inferior_memory.
	(check_mem_read): Mask out fast tracepoint jumps.
	(check_mem_write): Mask out fast tracepoint jumps.
	* mem-break.h (struct fast_tracepoint_jump): Forward declare.
	(set_fast_tracepoint_jump): Declare.
	(delete_fast_tracepoint_jump)
	(fast_tracepoint_jump_here, uninsert_fast_tracepoint_jumps_at)
	(reinsert_fast_tracepoint_jumps_at): Declare.
	* regcache.c: Don't compile many functions when building the
	in-process agent library.
	(init_register_cache) [IN_PROCESS_AGENT]: Don't allow allocating
	the register buffer in the heap.
	(free_register_cache): If the register buffer isn't owned by the
	regcache, don't free it.
	(set_register_cache) [IN_PROCESS_AGENT]: Don't re-alocate
	pre-existing register caches.
	* remote-utils.c (convert_int_to_ascii): Constify `from' parameter
	type.
	(convert_ascii_to_int): : Constify `from' parameter type.
	(decode_M_packet, decode_X_packet): Replace the `to' parameter by
	a `to_p' pointer to pointer parameter.  If TO_P is NULL, malloc
	the needed buffer in-place.
	(relocate_instruction): New.
	* server.c (handle_query) <qSymbols>: If the target supports
	tracepoints, give it a chance of looking up symbols.  Report
	support for fast tracepoints.
	(handle_status): Stabilize threads.
	(process_serial_event): Adjust.
	* server.h (struct fast_tracepoint_jump): Forward declare.
	(struct process_info) <fast_tracepoint_jumps>: New field.
	(convert_ascii_to_int, convert_int_to_ascii): Adjust.
	(decode_X_packet, decode_M_packet): Adjust.
	(relocate_instruction): Declare.
	(in_process_agent_loaded): Declare.
	(tracepoint_look_up_symbols): Declare.
	(struct fast_tpoint_collect_status): Declare.
	(fast_tracepoint_collecting): Declare.
	(force_unlock_trace_buffer): Declare.
	(handle_tracepoint_bkpts): Declare.
	(initialize_low_tracepoint)
	(supply_fast_tracepoint_registers) [IN_PROCESS_AGENT]: Declare.
	* target.h (struct target_ops) <stabilize_threads,
	install_fast_tracepoint_jump_pad>: New fields.
	(stabilize_threads, install_fast_tracepoint_jump_pad): New.
	* tracepoint.c [HAVE_MALLOC_H]: Include malloc.h.
	[HAVE_STDINT_H]: Include stdint.h.
	(trace_debug_1): Rename to ...
	(trace_vdebug): ... this.
	(trace_debug): Rename to ...
	(trace_debug_1): ... this.  Add `level' parameter.
	(trace_debug): New.
	(ATTR_USED, ATTR_NOINLINE): New.
	(IP_AGENT_EXPORT): New.
	(gdb_tp_heap_buffer, gdb_jump_pad_buffer, gdb_jump_pad_buffer_end)
	(collecting, gdb_collect, stop_tracing, flush_trace_buffer)
	(about_to_request_buffer_space, trace_buffer_is_full)
	(stopping_tracepoint, expr_eval_result, error_tracepoint)
	(tracepoints, tracing, trace_buffer_ctrl, trace_buffer_ctrl_curr)
	(trace_buffer_lo, trace_buffer_hi, traceframe_read_count)
	(traceframe_write_count, traceframes_created)
	(trace_state_variables)
	New renaming defines.
	(struct ipa_sym_addresses): New.
	(STRINGIZE_1, STRINGIZE, IPA_SYM): New.
	(symbol_list): New.
	(ipa_sym_addrs): New.
	(all_tracepoint_symbols_looked_up): New.
	(in_process_agent_loaded): New.
	(write_e_ipa_not_loaded): New.
	(maybe_write_ipa_not_loaded): New.
	(tracepoint_look_up_symbols): New.
	(debug_threads) [IN_PROCESS_AGENT]: New.
	(read_inferior_memory) [IN_PROCESS_AGENT]: New.
	(UNKNOWN_SIDE_EFFECTS): New.
	(stop_tracing): New.
	(flush_trace_buffer): New.
	(stop_tracing_bkpt): New.
	(flush_trace_buffer_bkpt): New.
	(read_inferior_integer): New.
	(read_inferior_uinteger): New.
	(read_inferior_data_pointer): New.
	(write_inferior_data_pointer): New.
	(write_inferior_integer): New.
	(write_inferior_uinteger): New.
	(struct collect_static_trace_data_action): Delete.
	(enum tracepoint_type): New.
	(struct tracepoint) <type>: New field `type'.
	<actions_str, step_actions, step_actions_str>: Only include in GDBserver.
	<orig_size, obj_addr_on_target, adjusted_insn_addr>
	<adjusted_insn_addr_end, jump_pad, jump_pad_end>: New fields.
	(tracepoints): Use IP_AGENT_EXPORT.
	(last_tracepoint): Don't include in the IPA.
	(stopping_tracepoint): Use IP_AGENT_EXPORT.
	(trace_buffer_is_full): Use IP_AGENT_EXPORT.
	(alloced_trace_state_variables): New.
	(trace_state_variables): Use IP_AGENT_EXPORT.
	(traceframe_t): Delete unused variable.
	(circular_trace_buffer): Don't include in the IPA.
	(trace_buffer_start): Delete.
	(struct trace_buffer_control): New.
	(trace_buffer_free): Delete.
	(struct ipa_trace_buffer_control): New.
	(GDBSERVER_FLUSH_COUNT_MASK, GDBSERVER_FLUSH_COUNT_MASK_PREV)
	(GDBSERVER_FLUSH_COUNT_MASK_CURR, GDBSERVER_UPDATED_FLUSH_COUNT_BIT):
	New.
	(trace_buffer_ctrl): New.
	(TRACE_BUFFER_CTRL_CURR): New.
	(trace_buffer_start, trace_buffer_free, trace_buffer_end_free):
	Reimplement as macros.
	(trace_buffer_wrap): Delete.
	(traceframe_write_count, traceframe_read_count)
	(traceframes_created, tracing): Use IP_AGENT_EXPORT.
	(struct tracepoint_hit_ctx) <type>: New field.
	(struct fast_tracepoint_ctx): New.
	(memory_barrier): New.
	(cmpxchg): New.
	(record_tracepoint_error): Update atomically in the IPA.
	(clear_inferior_trace_buffer): New.
	(about_to_request_buffer_space): New.
	(trace_buffer_alloc): Handle GDBserver and inferior simulatenous
	updating the same buffer.
	(add_tracepoint): Default the tracepoint's type to trap
	tracepoint, and orig_size to -1.
	(get_trace_state_variable) [IN_PROCESS_AGENT]: Handle allocated
	internal variables.
	(create_trace_state_variable): New parameter `gdb'.  Handle it.
	(clear_installed_tracepoints): Clear fast tracepoint jumps.
	(cmd_qtdp): Handle fast tracepoints.
	(cmd_qtdv): Adjust.
	(max_jump_pad_size): New.
	(gdb_jump_pad_head): New.
	(get_jump_space_head): New.
	(claim_jump_space): New.
	(sort_tracepoints): New.
	(MAX_JUMP_SIZE): New.
	(cmd_qtstart): Handle fast tracepoints.  Sync tracepoints with the
	IPA.
	(stop_tracing) [IN_PROCESS_AGENT]: Don't include the tdisconnected
	support.  Upload fast traceframes, and delete internal IPA
	breakpoints.
	(stop_tracing_handler): New.
	(flush_trace_buffer_handler): New.
	(cmd_qtstop): Upload fast tracepoints.
	(response_tracepoint): Handle fast tracepoints.
	(tracepoint_finished_step): Upload fast traceframes.  Set the
	tracepoint hit context's tracepoint type.
	(handle_tracepoint_bkpts): New.
	(tracepoint_was_hit): Set the tracepoint hit context's tracepoint
	type.  Add comment about fast tracepoints.
	(collect_data_at_tracepoint) [IN_PROCESS_AGENT]: Don't access the
	non-existing action_str field.
	(get_context_regcache): Handle fast tracepoints.
	(do_action_at_tracepoint) [!IN_PROCESS_AGENT]: Don't write the PC
	to the regcache.
	(fast_tracepoint_from_jump_pad_address): New.
	(fast_tracepoint_from_ipa_tpoint_address): New.
	(collecting_t): New.
	(force_unlock_trace_buffer): New.
	(fast_tracepoint_collecting): New.
	(collecting): New.
	(gdb_collect): New.
	(write_inferior_data_ptr): New.
	(target_tp_heap): New.
	(target_malloc): New.
	(download_agent_expr): New.
	(UALIGN): New.
	(download_tracepoints): New.
	(download_trace_state_variables): New.
	(upload_fast_traceframes): New.
	(IPA_FIRST_TRACEFRAME): New.
	(IPA_NEXT_TRACEFRAME_1): New.
	(IPA_NEXT_TRACEFRAME): New.
	[IN_PROCESS_AGENT]: Include sys/mman.h and fcntl.h.
	[IN_PROCESS_AGENT] (gdb_tp_heap_buffer, gdb_jump_pad_buffer)
	(gdb_jump_pad_buffer_end): New.
	[IN_PROCESS_AGENT] (initialize_tracepoint_ftlib): New.
	(initialize_tracepoint): Adjust.
	[IN_PROCESS_AGENT]: Allocate the IPA heap, and jump pad scratch
	buffer.  Initialize the low module.
	* utils.c (PREFIX, TOOLNAME): New.
	(malloc_failure): Use PREFIX.
	(error): In the IPA, an error causes an exit.
	(fatal, warning): Use PREFIX.
	(internal_error): Use TOOLNAME.
	(NUMCELLS): Increase to 10.
	* configure, config.in: Regenerate.

gdb/
2010-06-01  Pedro Alves  <pedro@codesourcery.com>

	* NEWS: Mention gdbserver fast tracepoints support.

gdb/doc/
2010-06-01  Pedro Alves  <pedro@codesourcery.com>

	* gdb.texinfo (Set Tracepoints): Mention tracepoints support in
	gdbserver, and add cross reference.
	(Tracepoints support in gdbserver): New subsection.
2010-06-01 13:20:52 +00:00

260 lines
10 KiB
Plaintext
Raw Blame History

# Mappings from configuration triplets to gdbserver build options.
# This is invoked from the autoconf-generated configure script, to
# produce the appropriate Makefile substitutions.
# This file sets the following shell variables:
# srv_regobj The register protocol appropriate for this target.
# srv_tgtobj Any other target-specific modules appropriate
# for this target.
# srv_hostio_err The object implementing the hostio_last_error
# target method.
# srv_xmlfiles All XML files which should be available for
# gdbserver in this configuration.
# ipa_obj Any other target-specific modules appropriate
# for this target's in-process agent.
#
# In addition, on GNU/Linux the following shell variables will be set:
# srv_linux_regsets Set to "yes" if ptrace(PTRACE_GETREGS) and friends
# may be available on this platform; unset otherwise.
# They will only be used if <sys/ptrace.h> defines
# PTRACE_GETREGS.
# srv_linux_usrregs Set to "yes" if we can get at registers via
# PTRACE_PEEKUSR / PTRACE_POKEUSR.
# Default hostio_last_error implementation
srv_hostio_err_objs="hostio-errno.o"
srv_i386_regobj="i386.o i386-avx.o i386-mmx.o"
srv_i386_linux_regobj="i386-linux.o i386-avx-linux.o i386-mmx-linux.o"
srv_amd64_regobj="amd64.o amd64-avx.o"
srv_amd64_linux_regobj="amd64-linux.o amd64-avx-linux.o"
ipa_i386_linux_regobj=i386-linux-ipa.o
ipa_amd64_linux_regobj=amd64-linux-ipa.o
srv_i386_32bit_xmlfiles="i386/32bit-core.xml i386/32bit-sse.xml i386/32bit-avx.xml"
srv_i386_64bit_xmlfiles="i386/64bit-core.xml i386/64bit-sse.xml i386/64bit-avx.xml"
srv_i386_xmlfiles="i386/i386.xml i386/i386-avx.xml i386/i386-mmx.xml $srv_i386_32bit_xmlfiles"
srv_amd64_xmlfiles="i386/amd64.xml i386/amd64-avx.xml $srv_i386_64bit_xmlfiles"
srv_i386_linux_xmlfiles="i386/i386-linux.xml i386/i386-avx-linux.xml i386/i386-mmx-linux.xml i386/32bit-linux.xml $srv_i386_32bit_xmlfiles"
srv_amd64_linux_xmlfiles="i386/amd64-linux.xml i386/amd64-avx-linux.xml i386/64bit-linux.xml $srv_i386_64bit_xmlfiles"
# Input is taken from the "${target}" variable.
case "${target}" in
arm*-*-linux*) srv_regobj="reg-arm.o arm-with-iwmmxt.o"
srv_regobj="${srv_regobj} arm-with-vfpv2.o"
srv_regobj="${srv_regobj} arm-with-vfpv3.o"
srv_regobj="${srv_regobj} arm-with-neon.o"
srv_tgtobj="linux-low.o linux-arm-low.o"
srv_xmlfiles="arm-with-iwmmxt.xml"
srv_xmlfiles="${srv_xmlfiles} arm-with-vfpv2.xml"
srv_xmlfiles="${srv_xmlfiles} arm-with-vfpv3.xml"
srv_xmlfiles="${srv_xmlfiles} arm-with-neon.xml"
srv_xmlfiles="${srv_xmlfiles} arm-core.xml"
srv_xmlfiles="${srv_xmlfiles} xscale-iwmmxt.xml"
srv_xmlfiles="${srv_xmlfiles} arm-vfpv2.xml"
srv_xmlfiles="${srv_xmlfiles} arm-vfpv3.xml"
srv_linux_usrregs=yes
srv_linux_regsets=yes
srv_linux_thread_db=yes
;;
arm*-*-mingw32ce*) srv_regobj=reg-arm.o
srv_tgtobj="win32-low.o win32-arm-low.o"
srv_tgtobj="${srv_tgtobj} wincecompat.o"
# hostio_last_error implementation is in win32-low.c
srv_hostio_err_objs=""
srv_mingw=yes
srv_mingwce=yes
;;
crisv32-*-linux*) srv_regobj=reg-crisv32.o
srv_tgtobj="linux-low.o linux-crisv32-low.o"
srv_linux_regsets=yes
srv_linux_thread_db=yes
;;
cris-*-linux*) srv_regobj=reg-cris.o
srv_tgtobj="linux-low.o linux-cris-low.o"
srv_linux_usrregs=yes
srv_linux_thread_db=yes
;;
i[34567]86-*-cygwin*) srv_regobj="$srv_i386_regobj"
srv_tgtobj="i386-low.o win32-low.o win32-i386-low.o"
srv_xmlfiles="$srv_i386_xmlfiles"
;;
i[34567]86-*-linux*) srv_regobj="$srv_i386_linux_regobj"
srv_xmlfiles="$srv_i386_linux_xmlfiles"
if test "$gdb_cv_i386_is_x86_64" = yes ; then
srv_regobj="$srv_regobj $srv_amd64_linux_regobj"
srv_xmlfiles="${srv_xmlfiles} $srv_amd64_linux_xmlfiles"
fi
srv_tgtobj="linux-low.o linux-x86-low.o i386-low.o i387-fp.o"
srv_linux_usrregs=yes
srv_linux_regsets=yes
srv_linux_thread_db=yes
ipa_obj="${ipa_i386_linux_regobj} linux-i386-ipa.o"
;;
i[34567]86-*-mingw32ce*)
srv_regobj="$srv_i386_regobj"
srv_tgtobj="i386-low.o win32-low.o win32-i386-low.o"
srv_tgtobj="${srv_tgtobj} wincecompat.o"
srv_xmlfiles="$srv_i386_xmlfiles"
# hostio_last_error implementation is in win32-low.c
srv_hostio_err_objs=""
srv_mingw=yes
srv_mingwce=yes
;;
i[34567]86-*-mingw*) srv_regobj="$srv_i386_regobj"
srv_tgtobj="i386-low.o win32-low.o win32-i386-low.o"
srv_xmlfiles="$srv_i386_xmlfiles"
srv_mingw=yes
;;
i[34567]86-*-nto*) srv_regobj="$srv_i386_regobj"
srv_tgtobj="nto-low.o nto-x86-low.o"
srv_xmlfiles="$srv_i386_xmlfiles"
srv_qnx="yes"
;;
ia64-*-linux*) srv_regobj=reg-ia64.o
srv_tgtobj="linux-low.o linux-ia64-low.o"
srv_linux_usrregs=yes
;;
m32r*-*-linux*) srv_regobj=reg-m32r.o
srv_tgtobj="linux-low.o linux-m32r-low.o"
srv_linux_usrregs=yes
srv_linux_thread_db=yes
;;
m68*-*-linux*) if test "$gdb_cv_m68k_is_coldfire" = yes; then
srv_regobj=reg-cf.o
else
srv_regobj=reg-m68k.o
fi
srv_tgtobj="linux-low.o linux-m68k-low.o"
srv_linux_usrregs=yes
srv_linux_regsets=yes
srv_linux_thread_db=yes
;;
m68*-*-uclinux*) if test "$gdb_cv_m68k_is_coldfire" = yes; then
srv_regobj=reg-cf.o
else
srv_regobj=reg-m68k.o
fi
srv_tgtobj="linux-low.o linux-m68k-low.o"
srv_linux_usrregs=yes
srv_linux_regsets=yes
srv_linux_thread_db=yes
;;
mips*-*-linux*) srv_regobj="mips-linux.o mips64-linux.o"
srv_tgtobj="linux-low.o linux-mips-low.o"
srv_xmlfiles="mips-linux.xml"
srv_xmlfiles="${srv_xmlfiles} mips-cpu.xml"
srv_xmlfiles="${srv_xmlfiles} mips-cp0.xml"
srv_xmlfiles="${srv_xmlfiles} mips-fpu.xml"
srv_xmlfiles="${srv_xmlfiles} mips64-linux.xml"
srv_xmlfiles="${srv_xmlfiles} mips64-cpu.xml"
srv_xmlfiles="${srv_xmlfiles} mips64-cp0.xml"
srv_xmlfiles="${srv_xmlfiles} mips64-fpu.xml"
srv_linux_regsets=yes
srv_linux_usrregs=yes
srv_linux_thread_db=yes
;;
powerpc*-*-linux*) srv_regobj="powerpc-32l.o"
srv_regobj="${srv_regobj} powerpc-altivec32l.o"
srv_regobj="${srv_regobj} powerpc-cell32l.o"
srv_regobj="${srv_regobj} powerpc-vsx32l.o"
srv_regobj="${srv_regobj} powerpc-isa205-32l.o"
srv_regobj="${srv_regobj} powerpc-isa205-altivec32l.o"
srv_regobj="${srv_regobj} powerpc-isa205-vsx32l.o"
srv_regobj="${srv_regobj} powerpc-e500l.o"
srv_regobj="${srv_regobj} powerpc-64l.o"
srv_regobj="${srv_regobj} powerpc-altivec64l.o"
srv_regobj="${srv_regobj} powerpc-cell64l.o"
srv_regobj="${srv_regobj} powerpc-vsx64l.o"
srv_regobj="${srv_regobj} powerpc-isa205-64l.o"
srv_regobj="${srv_regobj} powerpc-isa205-altivec64l.o"
srv_regobj="${srv_regobj} powerpc-isa205-vsx64l.o"
srv_tgtobj="linux-low.o linux-ppc-low.o"
srv_xmlfiles="rs6000/powerpc-32l.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/powerpc-altivec32l.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/powerpc-cell32l.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/powerpc-vsx32l.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/powerpc-isa205-32l.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/powerpc-isa205-altivec32l.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/powerpc-isa205-vsx32l.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/power-altivec.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/power-vsx.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/power-core.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/power-linux.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/power-fpu.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/power-fpu-isa205.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/powerpc-e500l.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/power-spe.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/powerpc-64l.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/powerpc-altivec64l.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/powerpc-cell64l.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/powerpc-vsx64l.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/powerpc-isa205-64l.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/powerpc-isa205-altivec64l.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/powerpc-isa205-vsx64l.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/power64-core.xml"
srv_xmlfiles="${srv_xmlfiles} rs6000/power64-linux.xml"
srv_linux_usrregs=yes
srv_linux_regsets=yes
srv_linux_thread_db=yes
;;
s390*-*-linux*) srv_regobj="s390-linux32.o"
srv_regobj="${srv_regobj} s390-linux64.o"
srv_regobj="${srv_regobj} s390x-linux64.o"
srv_tgtobj="linux-low.o linux-s390-low.o"
srv_xmlfiles="s390-linux32.xml"
srv_xmlfiles="${srv_xmlfiles} s390-linux64.xml"
srv_xmlfiles="${srv_xmlfiles} s390x-linux64.xml"
srv_xmlfiles="${srv_xmlfiles} s390-core32.xml"
srv_xmlfiles="${srv_xmlfiles} s390-core64.xml"
srv_xmlfiles="${srv_xmlfiles} s390x-core64.xml"
srv_xmlfiles="${srv_xmlfiles} s390-acr.xml"
srv_xmlfiles="${srv_xmlfiles} s390-fpr.xml"
srv_linux_usrregs=yes
srv_linux_regsets=yes
srv_linux_thread_db=yes
;;
sh*-*-linux*) srv_regobj=reg-sh.o
srv_tgtobj="linux-low.o linux-sh-low.o"
srv_linux_usrregs=yes
srv_linux_regsets=yes
srv_linux_thread_db=yes
;;
sparc*-*-linux*) srv_regobj=reg-sparc64.o
srv_tgtobj="linux-low.o linux-sparc-low.o"
srv_linux_regsets=yes
srv_linux_thread_db=yes
;;
spu*-*-*) srv_regobj=reg-spu.o
srv_tgtobj="spu-low.o"
;;
x86_64-*-linux*) srv_regobj="$srv_amd64_linux_regobj $srv_i386_linux_regobj"
srv_tgtobj="linux-low.o linux-x86-low.o i386-low.o i387-fp.o"
srv_xmlfiles="$srv_i386_linux_xmlfiles $srv_amd64_linux_xmlfiles"
srv_linux_usrregs=yes # This is for i386 progs.
srv_linux_regsets=yes
srv_linux_thread_db=yes
ipa_obj="${ipa_amd64_linux_regobj} linux-amd64-ipa.o"
;;
x86_64-*-mingw*) srv_regobj="$srv_amd64_regobj"
srv_tgtobj="i386-low.o i387-fp.o win32-low.o win32-i386-low.o"
srv_xmlfiles="$srv_i386_xmlfiles $srv_amd64_xmlfiles"
srv_mingw=yes
;;
xscale*-*-linux*) srv_regobj=reg-arm.o
srv_tgtobj="linux-low.o linux-arm-low.o"
srv_linux_usrregs=yes
srv_linux_thread_db=yes
;;
xtensa*-*-linux*) srv_regobj=reg-xtensa.o
srv_tgtobj="linux-low.o linux-xtensa-low.o"
srv_linux_regsets=yes
;;
*) echo "Error: target not supported by gdbserver."
exit 1
;;
esac
Reference in New Issue View Git Blame Copy Permalink