binutils-gdb/gdb
Andrew Cagney 9d799f85e0 Index: ChangeLog
2005-01-24  Andrew Cagney  <cagney@gnu.org>

	* infrun.c (handle_inferior_event): Handle back-to-back and nested
	signals where the step_resume_breakpoint may have already been
	inserted.

Index: testsuite/ChangeLog
2005-01-24  Andrew Cagney  <cagney@gnu.org>

	* gdb.base/sigrepeat.exp, gdb.base/sigrepeat.c: New test.
2005-01-24 22:00:59 +00:00
..
cli 2005-01-17 Andrew Cagney <cagney@gnu.org> 2005-01-17 16:17:36 +00:00
config * i386obsd-tdep.c: Update copyright year. Include 2005-01-23 19:35:05 +00:00
doc 2005-01-17 Michael Snyder <msnyder@redhat.com> 2005-01-17 19:54:42 +00:00
gdbserver Index: ChangeLog 2005-01-07 21:53:26 +00:00
mi 2005-01-14 Andrew Cagney <cagney@gnu.org> 2005-01-14 22:59:36 +00:00
nlm Index: ChangeLog 2004-09-13 20:55:42 +00:00
osf-share
po 2004-07-29 Andrew Cagney <cagney@gnu.org> 2004-07-30 14:30:08 +00:00
rdi-share * rdi-share/configure, rdi-share/aclocal.m4: Regenerated using 2005-01-19 21:27:50 +00:00
regformats
signals
testsuite Index: ChangeLog 2005-01-24 22:00:59 +00:00
tui 2005-01-12 Andrew Cagney <cagney@gnu.org> 2005-01-13 02:35:39 +00:00
vx-share 2004-11-13 Andrew Cagney <cagney@gnu.org> 2004-11-13 23:10:02 +00:00
abug-rom.c 2004-11-27 Baurjan Ismagulov <ibr@ata.cs.hun.edu.tr> 2004-12-12 17:06:26 +00:00
acconfig.h * acconfig.h (HAVE_STRUCT_REG_R_FS, HAVE_STRUCT_R_GS): Remove 2005-01-21 13:49:22 +00:00
acinclude.m4 2005-01-15 Andrew Cagney <cagney@gnu.org> 2005-01-15 20:32:43 +00:00
aclocal.m4 2005-01-15 Andrew Cagney <cagney@gnu.org> 2005-01-15 20:32:43 +00:00
ada-exp.y 2004-10-15 Andrew Cagney <cagney@gnu.org> 2004-10-15 13:29:33 +00:00
ada-lang.c 2005-01-12 Andrew Cagney <cagney@gnu.org> 2005-01-12 18:31:35 +00:00
ada-lang.h 2004-11-13 Andrew Cagney <cagney@gnu.org> 2004-11-13 23:10:02 +00:00
ada-lex.l 2004-10-15 Andrew Cagney <cagney@gnu.org> 2004-10-15 13:29:33 +00:00
ada-typeprint.c * ada-lang.c (ada_print_subexp): Remove i18n markup from Ada code 2004-12-21 10:03:55 +00:00
ada-valprint.c 2005-01-12 Andrew Cagney <cagney@gnu.org> 2005-01-12 18:31:35 +00:00
aix-thread.c 2005-01-05 Baurjan Ismagulov <ibr@ata.cs.hun.edu.tr> 2005-01-05 15:43:50 +00:00
alpha-linux-tdep.c
alpha-mdebug-tdep.c * alpha-mdebug-tdep.c: #include mdebugread.h. 2004-11-06 17:18:10 +00:00
alpha-nat.c 2005-01-05 Baurjan Ismagulov <ibr@ata.cs.hun.edu.tr> 2005-01-05 15:43:50 +00:00
alpha-osf1-tdep.c * alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Change 2004-12-13 05:07:23 +00:00
alpha-tdep.c 2005-01-05 Baurjan Ismagulov <ibr@ata.cs.hun.edu.tr> 2005-01-05 15:43:50 +00:00
alpha-tdep.h 2004-08-02 Andrew Cagney <cagney@gnu.org> 2004-08-03 00:57:27 +00:00
alphabsd-nat.c 2005-01-05 Baurjan Ismagulov <ibr@ata.cs.hun.edu.tr> 2005-01-05 15:43:50 +00:00
alphabsd-tdep.c
alphabsd-tdep.h
alphafbsd-tdep.c
alphanbsd-tdep.c 2005-01-05 Baurjan Ismagulov <ibr@ata.cs.hun.edu.tr> 2005-01-05 15:43:50 +00:00
amd64-linux-nat.c 2005-01-05 Baurjan Ismagulov <ibr@ata.cs.hun.edu.tr> 2005-01-05 15:43:50 +00:00
amd64-linux-tdep.c * amd64-linux-tdep.c (amd64_linux_sigtramp_start): Change argument 2004-08-22 16:27:30 +00:00
amd64-nat.c
amd64-nat.h * amd64-nat.h: Update copyright year. 2004-09-26 18:42:30 +00:00
amd64-sol2-tdep.c * Makefile.in (ALLDEPFILES): Add amd64-sol2-tdep.c. 2004-11-01 21:05:56 +00:00
amd64-tdep.c 2005-01-05 Baurjan Ismagulov <ibr@ata.cs.hun.edu.tr> 2005-01-05 15:43:50 +00:00
amd64-tdep.h
amd64bsd-nat.c 2005-01-05 Baurjan Ismagulov <ibr@ata.cs.hun.edu.tr> 2005-01-05 15:43:50 +00:00
amd64fbsd-nat.c 2005-01-05 Baurjan Ismagulov <ibr@ata.cs.hun.edu.tr> 2005-01-05 15:43:50 +00:00
amd64fbsd-tdep.c * amd64fbsd-tdep.c: Update copyright year. Include "gdb_assert.h" 2005-01-16 21:53:35 +00:00
amd64nbsd-nat.c * amd64-nat.h: Update copyright year. 2004-09-26 18:42:30 +00:00
amd64nbsd-tdep.c
amd64obsd-nat.c * amd64-nat.h: Update copyright year. 2004-09-26 18:42:30 +00:00
amd64obsd-tdep.c * amd64obsd-tdep.c (amd64obsd_sigtramp_p): Use 2004-08-22 20:34:55 +00:00
annotate.c
annotate.h
arch-utils.c 2005-01-05 Baurjan Ismagulov <ibr@ata.cs.hun.edu.tr> 2005-01-05 15:43:50 +00:00
arch-utils.h 2004-11-23 Randolph Chung <tausq@debian.org> 2004-11-23 21:05:23 +00:00
arm-linux-nat.c 2005-01-05 Baurjan Ismagulov <ibr@ata.cs.hun.edu.tr> 2005-01-05 15:43:50 +00:00
arm-linux-tdep.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-13 02:15:33 +00:00
arm-tdep.c 2005-01-05 Baurjan Ismagulov <ibr@ata.cs.hun.edu.tr> 2005-01-05 15:43:50 +00:00
arm-tdep.h
armnbsd-nat.c 2005-01-05 Baurjan Ismagulov <ibr@ata.cs.hun.edu.tr> 2005-01-05 15:43:50 +00:00
armnbsd-tdep.c 2005-01-05 Baurjan Ismagulov <ibr@ata.cs.hun.edu.tr> 2005-01-05 15:43:50 +00:00
auxv.c 2005-01-05 Baurjan Ismagulov <ibr@ata.cs.hun.edu.tr> 2005-01-05 15:43:50 +00:00
auxv.h
avr-tdep.c 2005-01-05 Baurjan Ismagulov <ibr@ata.cs.hun.edu.tr> 2005-01-05 15:43:50 +00:00
ax-gdb.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-12 21:45:08 +00:00
ax-gdb.h
ax-general.c
ax.h
bcache.c
bcache.h
bfd-target.c
bfd-target.h
block.c
block.h
blockframe.c 2004-11-10 Randolph Chung <tausq@debian.org> 2004-11-10 21:17:58 +00:00
breakpoint.c 2005-01-19 Andrew Cagney <cagney@gnu.org> 2005-01-19 21:15:44 +00:00
breakpoint.h
bsd-kvm.c * bsd-kvm.c (bsd_kvm_pcb_cmd): Cast return value from 2004-11-19 21:55:24 +00:00
bsd-kvm.h
bsd-uthread.c * bsd-uthread.h: New file. 2005-01-12 21:43:35 +00:00
bsd-uthread.h * bsd-uthread.h: New file. 2005-01-12 21:43:35 +00:00
buildsym.c * language.c (local_hex_format_custom): Remove. 2004-09-11 10:24:53 +00:00
buildsym.h
c-exp.y 2004-08-07 Andrew Cagney <cagney@gnu.org> 2004-08-07 19:45:45 +00:00
c-lang.c * language.c (local_hex_format_custom): Remove. 2004-09-11 10:24:53 +00:00
c-lang.h 2004-07-28 Andrew Cagney <cagney@gnu.org> 2004-07-28 15:18:08 +00:00
c-typeprint.c
c-valprint.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-12 21:45:08 +00:00
call-cmds.h
ChangeLog Index: ChangeLog 2005-01-24 22:00:59 +00:00
ChangeLog-3.x
ChangeLog-1990
ChangeLog-1991
ChangeLog-1992
ChangeLog-1993
ChangeLog-1994
ChangeLog-1995
ChangeLog-1996
ChangeLog-1997
ChangeLog-1998
ChangeLog-1999
ChangeLog-2000
ChangeLog-2001
ChangeLog-2002
ChangeLog-2003
ChangeLog-2004 2005. 2005-01-03 23:25:19 +00:00
charset.c 2004-07-26 Andrew Cagney <cagney@gnu.org> 2004-07-26 14:53:06 +00:00
charset.h
cli-out.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-13 23:39:40 +00:00
cli-out.h
coff-pe-read.c
coff-pe-read.h
coff-solib.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-13 23:45:29 +00:00
coff-solib.h 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-13 23:45:29 +00:00
coffread.c 2004-10-23 Andrew Cagney <cagney@gnu.org> 2004-10-23 16:18:09 +00:00
command.h 2005-01-05 Baurjan Ismagulov <ibr@ata.cs.hun.edu.tr> 2005-01-05 15:43:50 +00:00
complaints.c 2004-07-30 Andrew Cagney <cagney@gnu.org> 2004-07-30 17:55:47 +00:00
complaints.h
completer.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-13 23:52:28 +00:00
completer.h
config.in * acconfig.h (HAVE_STRUCT_REG_R_FS, HAVE_STRUCT_R_GS): Remove 2005-01-21 13:49:22 +00:00
configure 2005-01-24 Andrew Cagney <cagney@gnu.org> 2005-01-24 20:01:09 +00:00
configure.ac * acconfig.h (HAVE_STRUCT_REG_R_FS, HAVE_STRUCT_R_GS): Remove 2005-01-21 13:49:22 +00:00
configure.host * configure.host (ia64-*-aix*): Remove. 2005-01-04 22:59:45 +00:00
configure.tgt * configure.tgt: Set build_rdi_share to "yes" on those targets 2005-01-19 22:04:37 +00:00
CONTRIBUTE
COPYING
copying.awk
copying.c
core-aout.c 2004-09-07 Andrew Cagney <cagney@gnu.org> 2004-09-07 21:55:12 +00:00
core-regset.c
corefile.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-13 23:56:25 +00:00
corelow.c 2005-01-12 Andrew Cagney <cagney@gnu.org> 2005-01-12 18:31:35 +00:00
cp-abi.c
cp-abi.h
cp-namespace.c
cp-support.c
cp-support.h
cp-valprint.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-12 21:45:08 +00:00
cpu32bug-rom.c 2004-07-21 Andrew Cagney <cagney@gnu.org> 2004-07-22 01:31:49 +00:00
cris-tdep.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-13 02:15:33 +00:00
d10v-tdep.c 2004-11-01 Andrew Cagney <cagney@gnu.org> 2004-11-01 14:44:58 +00:00
dbug-rom.c 2004-07-21 Andrew Cagney <cagney@gnu.org> 2004-07-22 01:31:49 +00:00
dbxread.c * dbxread.c (process_one_symbol): Fix a few coding standard 2004-11-20 12:38:38 +00:00
dcache.c 2004-07-26 Andrew Cagney <cagney@gnu.org> 2004-07-26 14:53:06 +00:00
dcache.h
defs.h 2005-01-14 Andrew Cagney <cagney@gnu.org> 2005-01-14 21:34:36 +00:00
demangle.c 2004-07-26 Andrew Cagney <cagney@gnu.org> 2004-07-26 14:53:06 +00:00
dictionary.c
dictionary.h
dink32-rom.c
disasm.c
disasm.h
doublest.c * doublest.c (FLOATFORMAT_LARGEST_BYTES): New define. 2004-12-05 15:17:34 +00:00
doublest.h 2004-08-24 Andrew Cagney <cagney@gnu.org> 2004-08-24 22:49:27 +00:00
dsrec.c
dummy-frame.c 2004-08-02 Andrew Cagney <cagney@gnu.org> 2004-08-02 18:52:03 +00:00
dummy-frame.h 2004-08-02 Andrew Cagney <cagney@gnu.org> 2004-08-02 17:39:53 +00:00
dve3900-rom.c 2004-08-02 Andrew Cagney <cagney@gnu.org> 2004-08-03 00:57:27 +00:00
dwarf2-frame.c * dwarf2-frame.c (read_encoded_value): Correctly calculate number 2004-11-20 10:10:17 +00:00
dwarf2-frame.h * dwarf2-frame.c (struct dwarf2_frame_ops): Add signal_frame_p. 2004-11-07 21:16:11 +00:00
dwarf2expr.c * dwarf2expr.h (struct dwarf_expr_context): New members 2004-08-24 21:01:49 +00:00
dwarf2expr.h * dwarf2expr.h (struct dwarf_expr_context): New members 2004-08-24 21:01:49 +00:00
dwarf2loc.c 2004-11-09 Andrew Cagney <cagney@gnu.org> 2004-11-09 14:43:27 +00:00
dwarf2loc.h
dwarf2read.c * dwarf2read.c: Fix formatting. 2004-11-10 20:40:33 +00:00
dwarfread.c 2004-07-17 Andrew Cagney <cagney@gnu.org> 2004-07-17 14:15:30 +00:00
elfread.c 2004-10-23 Andrew Cagney <cagney@gnu.org> 2004-10-23 16:18:09 +00:00
environ.c
environ.h
eval.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-12 21:45:08 +00:00
event-loop.c 2005-01-12 Andrew Cagney <cagney@gnu.org> 2005-01-12 18:31:35 +00:00
event-loop.h
event-top.c 2005-01-17 Andrew Cagney <cagney@gnu.org> 2005-01-17 16:17:36 +00:00
event-top.h
exc_request.defs
exceptions.c 2005-01-19 Andrew Cagney <cagney@gnu.org> 2005-01-19 22:54:56 +00:00
exceptions.h 2005-01-19 Andrew Cagney <cagney@gnu.org> 2005-01-19 21:15:44 +00:00
exec.c 2004-10-08 Andrew Cagney <cagney@gnu.org> 2004-10-08 20:30:00 +00:00
exec.h
expprint.c 2004-11-09 Andrew Cagney <cagney@gnu.org> 2004-11-09 14:43:27 +00:00
expression.h
f-exp.y * f-exp.y (typename): Remove unused nonterminal. 2004-12-12 21:48:55 +00:00
f-lang.c * language.c (local_hex_format_custom): Remove. 2004-09-11 10:24:53 +00:00
f-lang.h
f-typeprint.c
f-valprint.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-12 21:45:08 +00:00
fbsd-nat.c * fbsd-nat.c: New files with cleaned up contents of fbsd-proc.c. 2004-09-19 15:37:55 +00:00
fbsd-nat.h * fbsd-nat.c: New files with cleaned up contents of fbsd-proc.c. 2004-09-19 15:37:55 +00:00
findvar.c 2004-11-15 Andrew Cagney <cagney@gnu.org> 2004-11-15 22:17:59 +00:00
fork-child.c * fork-child.c (fork_inferior): Fork instead of vfork if 2004-11-29 08:37:14 +00:00
frame-base.c 2004-08-02 Andrew Cagney <cagney@gnu.org> 2004-08-03 03:52:01 +00:00
frame-base.h
frame-unwind.c Index: ChangeLog 2004-08-02 16:07:31 +00:00
frame-unwind.h 2004-11-08 Andrew Cagney <cagney@gnu.org> 2004-11-09 01:16:42 +00:00
frame.c 2005-01-14 Andrew Cagney <cagney@gnu.org> 2005-01-14 23:27:14 +00:00
frame.h 2004-10-29 Andrew Cagney <cagney@gnu.org> 2004-10-29 20:23:17 +00:00
frv-linux-tdep.c
frv-tdep.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-13 02:15:33 +00:00
frv-tdep.h
gcore.c
gdb_assert.h
gdb_curses.h * configure.in: Check for ncurses/term.h. 2004-11-09 00:59:03 +00:00
gdb_dirent.h
gdb_gcore.sh
gdb_indent.sh 2004-09-27 Andrew Cagney <cagney@gnu.org> 2004-09-27 13:43:37 +00:00
gdb_locale.h
gdb_mbuild.sh
gdb_obstack.h
gdb_proc_service.h
gdb_ptrace.h * gdb_ptrace.h [PTRACE_TYPE_ARG5] (ptrace): New macro. 2004-11-20 16:52:22 +00:00
gdb_regex.h
gdb_stat.h
gdb_string.h * configure.ac: Use AC_CHECK_DECLS instead of gcc_AC_CHECK_DECLS 2005-01-21 13:14:02 +00:00
gdb_thread_db.h 2004-10-11 David Anderson <davea@sgi.com> 2004-10-11 16:35:28 +00:00
gdb_vfork.h
gdb_wait.h
gdb-events.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 00:16:53 +00:00
gdb-events.h 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 00:16:53 +00:00
gdb-events.sh 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 00:16:53 +00:00
gdb-stabs.h 2004-10-23 Andrew Cagney <cagney@gnu.org> 2004-10-23 16:18:09 +00:00
gdb.1
gdb.c
gdb.gdb
gdb.h 2005-01-13 Andrew Cagney <cagney@gnu.org> 2005-01-13 22:08:27 +00:00
gdbarch.c 2004-12-03 Randolph Chung <tausq@debian.org> 2004-12-03 23:59:53 +00:00
gdbarch.h 2004-12-03 Randolph Chung <tausq@debian.org> 2004-12-03 23:59:53 +00:00
gdbarch.sh 2004-12-03 Randolph Chung <tausq@debian.org> 2004-12-03 23:59:53 +00:00
gdbcmd.h 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 00:19:14 +00:00
gdbcore.h 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 00:21:19 +00:00
gdbinit.in
gdbthread.h 2004-08-25 Andrew Cagney <cagney@gnu.org> 2004-08-25 15:18:05 +00:00
gdbtypes.c * gdbtypes.c (make_qualified_type): Doc fix. Add assertion to 2004-11-04 17:50:16 +00:00
gdbtypes.h First part of turning on initial Ada support. 2004-10-01 10:23:09 +00:00
glibc-tdep.c
glibc-tdep.h
gnu-nat.c 2004-10-08 Andrew Cagney <cagney@gnu.org> 2004-10-08 20:30:00 +00:00
gnu-nat.h
gnu-v2-abi.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-12 21:45:08 +00:00
gnu-v3-abi.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-12 21:45:08 +00:00
go32-nat.c 2004-10-08 Andrew Cagney <cagney@gnu.org> 2004-10-08 20:30:00 +00:00
gregset.h
hpacc-abi.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-12 21:45:08 +00:00
hppa-hpux-nat.c * hppa-hpux-nat.c (hppa_hpux_child_can_run): Tweak comment. 2004-12-12 13:51:55 +00:00
hppa-hpux-tdep.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 00:23:41 +00:00
hppa-linux-nat.c 2004-07-23 Andrew Cagney <cagney@gnu.org> 2004-07-24 01:00:21 +00:00
hppa-linux-tdep.c 2004-11-30 Randolph Chung <tausq@debian.org> 2004-12-01 06:58:57 +00:00
hppa-tdep.c * hppa-tdep.c (prologue_inst_adjust_sp): Fix small confusion 2005-01-01 12:28:21 +00:00
hppa-tdep.h * hppa-tdep.h (hppa_regnum): Add HPPA_DP_REGNUM, HPPA_RET0_REGNUM, 2004-12-19 21:09:40 +00:00
hppabsd-nat.c * alphabsd-nat.c (fetch_inferior_registers): 2004-08-14 23:37:04 +00:00
hppabsd-tdep.c 2004-10-31 Andrew Cagney <cagney@gnu.org> 2004-10-31 19:43:30 +00:00
hpread.c 2004-12-13 Randolph Chung <tausq@debian.org> 2004-12-13 04:06:16 +00:00
hpux-thread.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 00:25:00 +00:00
i386-cygwin-tdep.c 2004-10-31 Andrew Cagney <cagney@gnu.org> 2004-10-31 20:24:32 +00:00
i386-linux-nat.c * i386-tdep.h (FPC_REGNUM, FCTRL_REGNUM, FSTAT_REGNUM, FTAG_REGNUM) 2004-09-08 14:46:09 +00:00
i386-linux-tdep.c 2004-11-09 Andrew Cagney <cagney@gnu.org> 2004-11-09 14:28:42 +00:00
i386-linux-tdep.h
i386-nat.c 2004-10-08 Jeff Johnston <jjohnstn@redhat.com> 2004-10-08 17:30:48 +00:00
i386-nto-tdep.c * i386-tdep.h (i386_collect_gregset): New prototype. 2004-12-24 14:45:32 +00:00
i386-sol2-nat.c * Makefile.in (ALLDEPFILES): Add amd64-sol2-tdep.c. 2004-11-01 21:05:56 +00:00
i386-sol2-tdep.c
i386-stub.c
i386-tdep.c 2004-10-31 Andrew Cagney <cagney@gnu.org> 2004-10-31 19:52:47 +00:00
i386-tdep.h * i386-tdep.h (i386_collect_gregset): New prototype. 2004-12-24 14:45:32 +00:00
i386bsd-nat.c * i386bsd-nat.c: Update copyright year. Don't include 2005-01-12 20:36:59 +00:00
i386bsd-nat.h * i386bsd-nat.c: Include "i386bsd-nat.h" and "inf-ptrace.h". 2004-09-19 20:49:26 +00:00
i386bsd-tdep.c 2004-10-31 Andrew Cagney <cagney@gnu.org> 2004-10-31 20:24:32 +00:00
i386fbsd-nat.c * bsd-kvm.c (bsd_kvm_pcb_cmd): Cast return value from 2004-11-19 21:55:24 +00:00
i386fbsd-tdep.c * amd64fbsd-tdep.c: Update copyright year. Include "gdb_assert.h" 2005-01-16 21:53:35 +00:00
i386gnu-nat.c * i386gnu-nat.c: Include "gdb_string.h". 2004-10-11 20:03:55 +00:00
i386gnu-tdep.c
i386nbsd-nat.c * i386bsd-nat.c: Include "i386bsd-nat.h" and "inf-ptrace.h". 2004-09-19 20:49:26 +00:00
i386nbsd-tdep.c 2004-10-31 Andrew Cagney <cagney@gnu.org> 2004-10-31 19:43:30 +00:00
i386obsd-nat.c * bsd-kvm.c (bsd_kvm_pcb_cmd): Cast return value from 2004-11-19 21:55:24 +00:00
i386obsd-tdep.c * i386obsd-tdep.c: Update copyright year. Include 2005-01-23 19:35:05 +00:00
i386v4-nat.c * i386v4-nat.c (supply_gregset, supply_fpregset, fill_gregset) 2004-10-31 15:35:08 +00:00
i386v-nat.c 2004-09-07 Andrew Cagney <cagney@gnu.org> 2004-09-07 21:55:12 +00:00
i387-tdep.c * language.c (local_hex_format_custom): Remove. 2004-09-11 10:24:53 +00:00
i387-tdep.h
ia64-linux-nat.c 2005-01-14 Jeff Johnston <jjohnstn@redhat.com> 2005-01-15 00:10:02 +00:00
ia64-linux-tdep.c * ia64-tdep.c: Include "osabi.h". 2005-01-05 22:51:47 +00:00
ia64-tdep.c * ia64-tdep.c: Include "osabi.h". 2005-01-05 22:51:47 +00:00
ia64-tdep.h * config/ia64/tm-linux.h: Tweak comment. Update copyright year. 2005-01-07 23:12:06 +00:00
inf-child.c 2005-01-18 Andrew Cagney <cagney@gnu.org> 2005-01-18 17:04:28 +00:00
inf-child.h 2004-09-12 Andrew Cagney <cagney@gnu.org> 2004-09-12 13:04:41 +00:00
inf-loop.c 2005-01-12 Andrew Cagney <cagney@gnu.org> 2005-01-12 18:31:35 +00:00
inf-loop.h
inf-ptrace.c * inf-ptrace.c (inf_ptrace_prepare_to_store) 2005-01-19 10:04:35 +00:00
inf-ptrace.h * inf-ptrace.h: Update copyright year. Sync comment with 2005-01-10 20:36:38 +00:00
inf-ttrace.c * inf-ttrace.c (inf_ttrace_him): Set TTEVT_BPT_SSTEP if available. 2004-12-11 21:53:58 +00:00
inf-ttrace.h * inf-ttrace.c: New file. 2004-11-23 21:14:33 +00:00
infcall.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-12 21:45:08 +00:00
infcall.h
infcmd.c * infcmd.c (attach_command): Call CLEAR_SOLIB if available. 2005-01-17 16:47:55 +00:00
inferior.h 2004-09-12 Andrew Cagney <cagney@gnu.org> 2004-09-12 15:05:05 +00:00
inflow.c 2004-10-29 Andrew Cagney <cagney@gnu.org> 2004-10-29 20:23:17 +00:00
inflow.h
infptrace.c * gdb_ptrace.h [PTRACE_TYPE_ARG5] (ptrace): New macro. 2004-11-20 16:52:22 +00:00
infrun.c Index: ChangeLog 2005-01-24 22:00:59 +00:00
inftarg.c 2005-01-18 Andrew Cagney <cagney@gnu.org> 2005-01-18 17:04:28 +00:00
interps.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 00:55:36 +00:00
interps.h 2005-01-12 Andrew Cagney <cagney@gnu.org> 2005-01-13 02:35:39 +00:00
irix5-nat.c * irix5-nat.c (fetch_core_registers): Replace use of 2004-11-13 23:49:31 +00:00
jv-exp.y 2004-09-20 Jeff Johnston <jjohnstn@redhat.com> 2004-09-20 20:18:39 +00:00
jv-lang.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-12 21:45:08 +00:00
jv-lang.h
jv-typeprint.c
jv-valprint.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-12 21:45:08 +00:00
kod-cisco.c
kod.c 2004-07-26 Andrew Cagney <cagney@gnu.org> 2004-07-26 14:53:06 +00:00
kod.h
language.c * language.c (language_gdbarch_post_init): Fix off-by one error. 2004-09-22 20:23:54 +00:00
language.h 2004-09-11 Andrew Cagney <cagney@gnu.org> 2004-09-11 15:04:16 +00:00
libunwind-frame.c 2004-08-05 Jeff Johnston <jjohnstn@redhat.com> 2004-08-05 20:37:56 +00:00
libunwind-frame.h
linespec.c 2005-01-14 Andrew Cagney <cagney@gnu.org> 2005-01-14 20:24:20 +00:00
linespec.h
linux-nat.c 2005-01-18 Andrew Cagney <cagney@gnu.org> 2005-01-18 17:04:28 +00:00
linux-nat.h
linux-thread-db.c * linux-thread-db.c (BUILD_THREAD): Delete. 2004-12-08 15:10:30 +00:00
lynx-nat.c 2004-08-02 Andrew Cagney <cagney@gnu.org> 2004-08-03 00:57:27 +00:00
m2-exp.y
m2-lang.c * language.c (local_hex_format_custom): Remove. 2004-09-11 10:24:53 +00:00
m2-lang.h
m2-typeprint.c
m2-valprint.c
m32r-linux-nat.c 2004-09-30 Kei Sakamoto <sakamoto.kei@renesas.com> 2004-10-01 07:29:34 +00:00
m32r-linux-tdep.c 2004-11-12 Kei Sakamoto <sakamoto.kei@renesas.com> 2004-11-12 01:00:41 +00:00
m32r-rom.c 2005-01-12 Andrew Cagney <cagney@gnu.org> 2005-01-12 18:31:35 +00:00
m32r-stub.c
m32r-tdep.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-13 02:15:33 +00:00
m32r-tdep.h 2004-09-30 Kei Sakamoto <sakamoto.kei@renesas.com> 2004-10-01 07:29:34 +00:00
m68hc11-tdep.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-13 02:15:33 +00:00
m68k-stub.c
m68k-tdep.c 2004-10-27 Andrew Cagney <cagney@gnu.org> 2004-10-29 14:00:58 +00:00
m68k-tdep.h
m68kbsd-nat.c * m68kbsd-nat.c: Include "inf-ptrace.h". 2004-11-08 20:42:53 +00:00
m68kbsd-tdep.c 2004-10-31 Andrew Cagney <cagney@gnu.org> 2004-10-31 20:24:32 +00:00
m68klinux-nat.c 2004-09-07 Andrew Cagney <cagney@gnu.org> 2004-09-07 21:55:12 +00:00
m68klinux-tdep.c * m68klinux-tdep.c: Include "glibc-tdep.h" and "solib-svr4.h". 2004-11-21 01:51:16 +00:00
m88k-tdep.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-13 02:15:33 +00:00
m88k-tdep.h
m88kbsd-nat.c * m88kbsd-nat.c: Include "target.h" and "inf-ptrace.h". 2004-09-30 20:52:59 +00:00
macrocmd.c
macroexp.c
macroexp.h
macroscope.c
macroscope.h
macrotab.c
macrotab.h
main.c 2005-01-13 Andrew Cagney <cagney@gnu.org> 2005-01-14 01:20:38 +00:00
main.h
maint.c gdb/doc/ 2004-09-20 22:26:21 +00:00
MAINTAINERS 2005-01-16 Jason Thorpe <thorpej@netbsd.org> 2005-01-17 00:01:48 +00:00
Makefile.in * i386obsd-tdep.c: Update copyright year. Include 2005-01-23 19:35:05 +00:00
mdebugread.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 00:59:32 +00:00
mdebugread.h 2004-10-31 Andrew Cagney <cagney@gnu.org> 2004-10-31 17:57:43 +00:00
mem-break.c
memattr.c * language.c (local_hex_format_custom): Remove. 2004-09-11 10:24:53 +00:00
memattr.h
minsyms.c * minsyms.c (lookup_minimal_symbol): Doc fix. 2004-09-20 16:54:28 +00:00
mips64obsd-nat.c * mips64obsd-nat.c: Include "mips-tdep.h". 2004-11-07 17:08:34 +00:00
mips64obsd-tdep.c * mips64obsd-tdep.c: Include "trad-frame.h", "tramp-frame.h" and 2004-11-07 17:02:44 +00:00
mips-irix-tdep.c
mips-linux-nat.c 2004-10-30 Andrew Cagney <cagney@gnu.org> 2004-10-30 22:54:40 +00:00
mips-linux-tdep.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-17 19:49:14 +00:00
mips-mdebug-tdep.c 2004-10-30 Andrew Cagney <cagney@gnu.org> 2004-10-31 04:33:14 +00:00
mips-mdebug-tdep.h 2004-10-30 Andrew Cagney <cagney@gnu.org> 2004-10-30 20:26:26 +00:00
mips-tdep.c 2005-01-05 Baurjan Ismagulov <ibr@ata.cs.hun.edu.tr> 2005-01-05 15:43:50 +00:00
mips-tdep.h 2004-10-30 Andrew Cagney <cagney@gnu.org> 2004-10-30 23:22:54 +00:00
mipsnbsd-nat.c * mipsnbsd-nat.c: Include "target.h" and "inf-ptrace.h". 2004-10-31 20:47:55 +00:00
mipsnbsd-tdep.c * mipsnbsd-tdep.c (mipsnbsd_ilp32_fetch_link_map_offsets): Renamed 2004-11-07 17:53:30 +00:00
mipsnbsd-tdep.h
mipsread.c * mipsread.c: Cleanup coding style. 2004-10-30 15:01:31 +00:00
mipsv4-nat.c 2004-10-30 Andrew Cagney <cagney@gnu.org> 2004-10-30 23:08:18 +00:00
mn10300-tdep.c 2004-12-10 Michael Snyder <msnyder@redhat.com> 2004-12-11 02:02:01 +00:00
mn10300-tdep.h 2004-12-10 Michael Snyder <msnyder@redhat.com> 2004-12-11 02:02:01 +00:00
monitor.c 2005-01-19 Andrew Cagney <cagney@gnu.org> 2005-01-19 21:15:44 +00:00
monitor.h
msg_reply.defs
msg.defs
nbsd-tdep.c
nbsd-tdep.h
NEWS * NEWS: Mention new BSD user-level threads support. 2005-01-23 19:43:23 +00:00
nlmread.c 2004-10-23 Andrew Cagney <cagney@gnu.org> 2004-10-23 16:18:09 +00:00
notify.defs
nto-procfs.c 2005-01-19 Andrew Cagney <cagney@gnu.org> 2005-01-19 21:15:44 +00:00
nto-tdep.c * i386-tdep.h (i386_collect_gregset): New prototype. 2004-12-24 14:45:32 +00:00
nto-tdep.h * nto-tdep.h: Include osabi.h. Prototypes for generic Neutrino 2004-12-10 13:38:23 +00:00
objc-exp.y 2004-07-28 Andrew Cagney <cagney@gnu.org> 2004-07-28 15:49:04 +00:00
objc-lang.c 2005-01-12 Andrew Cagney <cagney@gnu.org> 2005-01-12 18:31:35 +00:00
objc-lang.h
objfiles.c 2004-10-31 Andrew Cagney <cagney@gnu.org> 2004-10-31 17:48:17 +00:00
objfiles.h 2004-10-23 Andrew Cagney <cagney@gnu.org> 2004-10-23 16:18:09 +00:00
observer.c 2004-07-28 Andrew Cagney <cagney@gnu.org> 2004-07-28 17:26:27 +00:00
observer.sh 2004-09-01 Jeff Johnston <jjohnstn@redhat.com> 2004-09-01 18:00:29 +00:00
ocd.c 2005-01-19 Andrew Cagney <cagney@gnu.org> 2005-01-19 21:15:44 +00:00
ocd.h
osabi.c
osabi.h
p-exp.y 2004-07-28 Andrew Cagney <cagney@gnu.org> 2004-07-28 15:49:04 +00:00
p-lang.c * language.c (local_hex_format_custom): Remove. 2004-09-11 10:24:53 +00:00
p-lang.h
p-typeprint.c
p-valprint.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-12 21:45:08 +00:00
pa64solib.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 01:01:34 +00:00
pa64solib.h 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 01:01:34 +00:00
parse.c 2004-11-12 Randolph Chung <tausq@debian.org> 2004-11-13 02:27:41 +00:00
parser-defs.h
ppc-bdm.c 2004-10-08 Andrew Cagney <cagney@gnu.org> 2004-10-08 20:30:00 +00:00
ppc-linux-nat.c * ppc-linux-nat.c (fetch_register): Replace 'gdb_assert (0)' with 2004-08-04 17:45:30 +00:00
ppc-linux-tdep.c 2004-10-31 Andrew Cagney <cagney@gnu.org> 2004-10-31 20:24:32 +00:00
ppc-sysv-tdep.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-12 21:45:08 +00:00
ppc-tdep.h Change the layout of the PowerPC E500 raw register cache to allow 2004-08-04 17:17:55 +00:00
ppcbug-rom.c 2004-07-21 Andrew Cagney <cagney@gnu.org> 2004-07-22 01:31:49 +00:00
ppcnbsd-nat.c 2004-09-12 Andrew Cagney <cagney@gnu.org> 2004-09-12 13:04:41 +00:00
ppcnbsd-tdep.c 2004-07-23 Andrew Cagney <cagney@gnu.org> 2004-07-24 01:00:21 +00:00
ppcnbsd-tdep.h
ppcobsd-nat.c * alphabsd-nat.c (fetch_inferior_registers): 2004-08-14 23:37:04 +00:00
ppcobsd-tdep.c 2004-10-31 Andrew Cagney <cagney@gnu.org> 2004-10-31 19:43:30 +00:00
ppcobsd-tdep.h
printcmd.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-12 21:45:08 +00:00
PROBLEMS 2004-11-08 Andrew Cagney <cagney@gnu.org> 2004-11-08 15:55:49 +00:00
proc-api.c 2004-07-26 Andrew Cagney <cagney@gnu.org> 2004-07-26 14:53:06 +00:00
proc-events.c * proc-events.c: Fix several coding-style issues. Consistently 2004-10-28 11:45:43 +00:00
proc-flags.c
proc-service.c
proc-utils.h
proc-why.c * proc-why.c: Fix several coding-style issues. 2004-10-28 11:04:07 +00:00
process_reply.defs
procfs.c * procfs.c (procfs_fetch_registers, procfs_store_registers): Like 2004-10-30 21:30:58 +00:00
README Remove config.if. 2004-12-03 10:30:13 +00:00
regcache.c 2004-11-13 Andrew Cagney <cagney@gnu.org> 2004-11-14 01:11:07 +00:00
regcache.h 2004-11-13 Andrew Cagney <cagney@gnu.org> 2004-11-14 01:11:07 +00:00
reggroups.c
reggroups.h
regset.c
regset.h
remote-e7000.c 2005-01-12 Andrew Cagney <cagney@gnu.org> 2005-01-12 18:31:35 +00:00
remote-est.c 2004-07-21 Andrew Cagney <cagney@gnu.org> 2004-07-22 01:31:49 +00:00
remote-fileio.c 2005-01-19 Andrew Cagney <cagney@gnu.org> 2005-01-19 21:15:44 +00:00
remote-fileio.h
remote-hms.c 2004-07-21 Andrew Cagney <cagney@gnu.org> 2004-07-22 01:31:49 +00:00
remote-m32r-sdi.c 2004-10-08 Andrew Cagney <cagney@gnu.org> 2004-10-08 20:30:00 +00:00
remote-mips.c 2005-01-19 Andrew Cagney <cagney@gnu.org> 2005-01-19 21:15:44 +00:00
remote-rdi.c 2004-10-08 Andrew Cagney <cagney@gnu.org> 2004-10-08 20:30:00 +00:00
remote-rdp.c 2004-10-29 Andrew Cagney <cagney@gnu.org> 2004-10-29 20:23:17 +00:00
remote-sds.c 2005-01-19 Andrew Cagney <cagney@gnu.org> 2005-01-19 21:15:44 +00:00
remote-sim.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 01:05:37 +00:00
remote-st.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 01:08:21 +00:00
remote-utils.c 2004-07-26 Andrew Cagney <cagney@gnu.org> 2004-07-26 14:53:06 +00:00
remote-utils.h
remote.c 2005-01-19 Andrew Cagney <cagney@gnu.org> 2005-01-19 21:15:44 +00:00
remote.h
reply_mig_hack.awk
rom68k-rom.c 2004-08-02 Andrew Cagney <cagney@gnu.org> 2004-08-03 00:57:27 +00:00
rs6000-nat.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 01:54:49 +00:00
rs6000-tdep.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 01:54:49 +00:00
s390-nat.c
s390-tdep.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-13 02:15:33 +00:00
s390-tdep.h
scm-exp.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-12 21:45:08 +00:00
scm-lang.c * language.c (local_hex_format_custom): Remove. 2004-09-11 10:24:53 +00:00
scm-lang.h
scm-tags.h
scm-valprint.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 01:57:03 +00:00
sentinel-frame.c 2004-11-08 Andrew Cagney <cagney@gnu.org> 2004-11-09 01:16:42 +00:00
sentinel-frame.h
ser-e7kpc.c
ser-go32.c 2004-07-26 Andrew Cagney <cagney@gnu.org> 2004-07-26 14:53:06 +00:00
ser-pipe.c
ser-tcp.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 01:59:20 +00:00
ser-unix.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 01:59:20 +00:00
ser-unix.h
serial.c 2004-07-26 Andrew Cagney <cagney@gnu.org> 2004-07-26 14:53:06 +00:00
serial.h 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 01:59:20 +00:00
sh3-rom.c 2004-07-21 Andrew Cagney <cagney@gnu.org> 2004-07-22 01:31:49 +00:00
sh64-tdep.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-13 02:15:33 +00:00
sh-stub.c
sh-tdep.c * sh-tdep.c (sh_extract_return_value_nofpu): Rename from 2004-12-14 15:40:17 +00:00
sh-tdep.h * sh-tdep.c (SH_NUM_REGS): Define as 67. 2004-10-06 08:55:36 +00:00
shnbsd-nat.c Really s/PTRACE_ARG3_TYPE/PTRACE_TYPE_ARG3/g 2004-08-14 23:43:33 +00:00
shnbsd-tdep.c 2004-07-23 Andrew Cagney <cagney@gnu.org> 2004-07-24 01:00:21 +00:00
shnbsd-tdep.h
sim-regno.h
sol-thread.c 2004-10-08 Andrew Cagney <cagney@gnu.org> 2004-10-08 20:30:00 +00:00
solib-aix5.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 02:04:02 +00:00
solib-frv.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 02:04:02 +00:00
solib-irix.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 02:04:02 +00:00
solib-legacy.c
solib-null.c * solib-null.c: New file. 2004-11-18 17:23:05 +00:00
solib-osf.c * solib-osf.c (osf_current_sos): Remove unsused label. 2004-08-15 12:08:49 +00:00
solib-pa64.c * solib-pa64.c: Only include <dlfcn.h>, <elf.h> and <elf_hp.h> if 2004-12-18 14:27:57 +00:00
solib-pa64.h 2004-12-07 Randolph Chung <tausq@debian.org> 2004-12-08 01:36:42 +00:00
solib-som.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 02:04:02 +00:00
solib-som.h 2004-12-07 Randolph Chung <tausq@debian.org> 2004-12-08 01:36:42 +00:00
solib-sunos.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 02:04:02 +00:00
solib-svr4.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 02:04:02 +00:00
solib-svr4.h 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 02:04:02 +00:00
solib.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 02:04:02 +00:00
solib.h 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 02:04:02 +00:00
solist.h 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 04:00:06 +00:00
somread.c * somread.c: Include "solib-som.h". 2004-12-18 14:21:09 +00:00
somsolib.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 03:12:43 +00:00
somsolib.h 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 03:12:43 +00:00
source.c * config/i386/xm-go32.h: Don't include fopen-bin.h. 2004-11-13 17:00:04 +00:00
source.h
sparc64-linux-nat.c
sparc64-linux-tdep.c * sparc64-linux-tdep.c: Update copyright year. Don't include 2004-10-10 19:50:59 +00:00
sparc64-nat.c
sparc64-sol2-tdep.c 2004-10-31 Andrew Cagney <cagney@gnu.org> 2004-10-31 19:52:47 +00:00
sparc64-tdep.c * sparc64-tdep.c (sparc64_store_arguments): Fix typo. 2005-01-16 20:08:20 +00:00
sparc64-tdep.h
sparc64fbsd-nat.c * sparc64fbsd-nat.c: Include "fbsd-nat.h". 2005-01-16 20:29:11 +00:00
sparc64fbsd-tdep.c * sparc64fbsd-tdep.c: Update copyright year. 2005-01-16 21:18:48 +00:00
sparc64nbsd-nat.c * sparc-nat.c: Include "inf-ptrace.h". 2004-10-12 22:18:55 +00:00
sparc64nbsd-tdep.c 2004-10-31 Andrew Cagney <cagney@gnu.org> 2004-10-31 19:52:47 +00:00
sparc64obsd-tdep.c 2004-10-31 Andrew Cagney <cagney@gnu.org> 2004-10-31 19:52:47 +00:00
sparc-linux-tdep.c * sparc-linux-tdep.c: Update copyright year. 2004-10-10 17:56:12 +00:00
sparc-nat.c * sparc-nat.c (inf_ptrace_xfer_partial): New variable. 2004-11-29 08:41:56 +00:00
sparc-nat.h * sparc-nat.c: Include "inf-ptrace.h". 2004-10-12 22:18:55 +00:00
sparc-sol2-nat.c
sparc-sol2-tdep.c 2004-10-31 Andrew Cagney <cagney@gnu.org> 2004-10-31 19:52:47 +00:00
sparc-stub.c
sparc-tdep.c * sparc-tdep.c (sparc_integral_or_pointer_p): Simplify. 2005-01-16 20:06:54 +00:00
sparc-tdep.h * sparc-tdep.h (sparc32nbsd_elf_init_abi): New prototype. 2004-11-29 15:20:28 +00:00
sparcnbsd-nat.c * sparc-nat.c: Include "inf-ptrace.h". 2004-10-12 22:18:55 +00:00
sparcnbsd-tdep.c * sparc-tdep.h (sparc32nbsd_elf_init_abi): New prototype. 2004-11-29 15:20:28 +00:00
sparcobsd-tdep.c * sparc-tdep.h (sparc32nbsd_elf_init_abi): New prototype. 2004-11-29 15:20:28 +00:00
srec.h
stabsread.c * stabsread.c (read_huge_number): Add support for reading octal 2004-12-13 15:56:47 +00:00
stabsread.h
stack.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 02:32:25 +00:00
stack.h
std-regs.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-12 21:45:08 +00:00
stop-gdb.c
symfile-mem.c 2005-01-14 Andrew Cagney <cagney@gnu.org> 2005-01-14 23:27:14 +00:00
symfile.c 2004-10-23 Andrew Cagney <cagney@gnu.org> 2004-10-23 16:18:09 +00:00
symfile.h Fix bug reported and analyzed by Olivier Crete: 2004-09-08 21:58:19 +00:00
symmisc.c 2005-01-12 Andrew Cagney <cagney@gnu.org> 2005-01-12 18:31:35 +00:00
symtab.c * symtab.c (symbol_search_name): Minor reformatting. 2004-10-22 20:58:56 +00:00
symtab.h * symtab.h: Fix typo in comment. 2004-10-21 00:52:30 +00:00
target.c 2005-01-18 Andrew Cagney <cagney@gnu.org> 2005-01-18 17:04:28 +00:00
target.h 2005-01-18 Andrew Cagney <cagney@gnu.org> 2005-01-18 17:04:28 +00:00
terminal.h
thread.c 2005-01-14 Andrew Cagney <cagney@gnu.org> 2005-01-14 23:27:14 +00:00
top.c 2005-01-17 Andrew Cagney <cagney@gnu.org> 2005-01-17 16:17:36 +00:00
top.h 2005-01-17 Andrew Cagney <cagney@gnu.org> 2005-01-17 16:17:36 +00:00
tracepoint.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 03:59:19 +00:00
tracepoint.h 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 03:59:19 +00:00
trad-frame.c 2004-10-27 Andrew Cagney <cagney@gnu.org> 2004-10-29 14:00:58 +00:00
trad-frame.h 2004-08-01 Andrew Cagney <cagney@gnu.org> 2004-08-01 14:34:39 +00:00
tramp-frame.c 2004-12-13 Randolph Chung <tausq@debian.org> 2004-12-13 03:38:23 +00:00
tramp-frame.h 2004-07-20 Andrew Cagney <cagney@gnu.org> 2004-07-20 15:11:37 +00:00
typeprint.c 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-12 21:45:08 +00:00
typeprint.h
ui-file.c
ui-file.h
ui-out.c * language.c (local_hex_format_custom): Remove. 2004-09-11 10:24:53 +00:00
ui-out.h
user-regs.c
user-regs.h
utils.c * configure.ac: Use AC_CHECK_DECLS instead of gcc_AC_CHECK_DECLS 2005-01-21 13:14:02 +00:00
uw-thread.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 04:03:02 +00:00
valarith.c * valarith.c (value_subscript): Copy VALUE_FRAME_ID. 2004-11-21 19:52:13 +00:00
valops.c * valarith.c (value_subscript): Copy VALUE_FRAME_ID. 2004-11-21 19:52:13 +00:00
valprint.c 2004-09-12 Andrew Cagney <cagney@gnu.org> 2004-09-12 16:13:04 +00:00
valprint.h
value.c 2004-11-15 Andrew Cagney <cagney@gnu.org> 2004-11-15 22:17:59 +00:00
value.h 2004-11-12 Andrew Cagney <cagney@gnu.org> 2004-11-13 02:29:48 +00:00
varobj.c Index: ChangeLog 2005-01-14 18:17:20 +00:00
varobj.h
vax-nat.c * vax-nat.c: Update copyright year. Include "inf-ptrace.h". 2005-01-10 20:56:17 +00:00
vax-tdep.c * vax-tdep.c (vax_frame_this_id): Use frame_func_unwind instead of 2004-08-08 10:38:29 +00:00
vax-tdep.h
vaxbsd-nat.c * vaxbsd-nat.c: Include "target,h" and "inf-ptrace.h". 2004-09-30 21:04:35 +00:00
vaxnbsd-tdep.c 2004-10-31 Andrew Cagney <cagney@gnu.org> 2004-10-31 20:24:32 +00:00
version.h
version.in *** empty log message *** 2005-01-24 00:00:35 +00:00
win32-nat.c * win32-nat.c: Update copyright year. 2005-01-23 05:09:46 +00:00
wince-stub.c
wince-stub.h
wince.c 2005-01-13 Michael Snyder <msnyder@redhat.com> 2005-01-14 04:33:08 +00:00
windows-nat.c * win32-nat.c: Update copyright year. 2005-01-23 05:09:46 +00:00
wrapper.c 2005-01-14 Andrew Cagney <cagney@gnu.org> 2005-01-14 23:27:14 +00:00
wrapper.h
xcoffread.c 2004-10-23 Andrew Cagney <cagney@gnu.org> 2004-10-23 16:18:09 +00:00
xcoffsolib.c 2004-07-26 Andrew Cagney <cagney@gnu.org> 2004-07-26 14:53:06 +00:00
xcoffsolib.h
xstormy16-tdep.c * xstormy16-tdep.c (xstormy16_skip_prologue): Clear/initialize the 2004-12-15 22:45:39 +00:00

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

		     README for gdb-6.3 release
		Updated 8, November, 2004 by Andrew Cagney

This is GDB, the GNU source-level debugger.

A summary of new features is in the file `gdb/NEWS'.

Check the GDB home page at http://www.gnu.org/software/gdb/ for up to
date release information, mailing list links and archives, etc.

The file `gdb/PROBLEMS' contains information on problems identified
late in the release cycle.  GDB's bug tracking data base at
http://www.gnu.org/software/gdb/bugs/ contains a more complete list of
bugs.


Unpacking and Installation -- quick overview
==========================

   In this release, the GDB debugger sources, the generic GNU include
files, the BFD ("binary file description") library, the readline
library, and other libraries all have directories of their own
underneath the gdb-6.3 directory.  The idea is that a variety of GNU
tools can share a common copy of these things.  Be aware of variation
over time--for example don't try to build gdb with a copy of bfd from
a release other than the gdb release (such as a binutils release),
especially if the releases are more than a few weeks apart.
Configuration scripts and makefiles exist to cruise up and down this
directory tree and automatically build all the pieces in the right
order.

   When you unpack the gdb-6.3.tar.gz file, you'll find a directory
called `gdb-6.3', which contains:

  COPYING       config-ml.in  gettext.m4   ltconfig        sim
  COPYING.LIB   config.guess  include      ltmain.sh       src-release
  Makefile.def  config.sub    install-sh   md5.sum         symlink-tree
  Makefile.in   configure     libiberty    missing         texinfo
  Makefile.tpl  configure.in  libtool.m4   mkinstalldirs   ylwrap
  README        djunpack.bat  ltcf-c.sh    move-if-change
  bfd           etc           ltcf-cxx.sh  opcodes
  config        gdb           ltcf-gcj.sh  readline

You can build GDB right in the source directory:

      cd gdb-6.3
      ./configure
      make
      cp gdb/gdb /usr/local/bin/gdb	(or wherever you want)

However, we recommend that an empty directory be used instead.
This way you do not clutter your source tree with binary files
and will be able to create different builds with different 
configuration options.

You can build GDB in any empty build directory:

      mkdir build
      cd build
      <full path to your sources>/gdb-6.3/configure
      make
      cp gdb/gdb /usr/local/bin/gdb	(or wherever you want)

(Building GDB with DJGPP tools for MS-DOS/MS-Windows is slightly
different; see the file gdb-6.3/gdb/config/djgpp/README for details.)

   This will configure and build all the libraries as well as GDB.  If
`configure' can't determine your system type, specify one as its
argument, e.g., `./configure sun4' or `./configure decstation'.

   Make sure that your 'configure' line ends in 'gdb-6.3/configure':

      /berman/migchain/source/gdb-6.3/configure      # RIGHT
      /berman/migchain/source/gdb-6.3/gdb/configure  # WRONG

   The gdb package contains several subdirectories, such as 'gdb',
'bfd', and 'readline'.  If your 'configure' line ends in
'gdb-6.3/gdb/configure', then you are configuring only the gdb
subdirectory, not the whole gdb package.  This leads to build errors
such as:

      make: *** No rule to make target `../bfd/bfd.h', needed by `gdb.o'.  Stop.

   If you get other compiler errors during this stage, see the `Reporting
Bugs' section below; there are a few known problems.

   GDB requires an ISO C (ANSI C) compiler.  If you do not have an ISO
C compiler for your system, you may be able to download and install
the GNU CC compiler.  It is available via anonymous FTP from the
directory `ftp://ftp.gnu.org/pub/gnu/gcc'.

   GDB can be used as a cross-debugger, running on a machine of one
type while debugging a program running on a machine of another type.
See below.


More Documentation
******************

   All the documentation for GDB comes as part of the machine-readable
distribution.  The documentation is written in Texinfo format, which
is a documentation system that uses a single source file to produce
both on-line information and a printed manual.  You can use one of the
Info formatting commands to create the on-line version of the
documentation and TeX (or `texi2roff') to typeset the printed version.

   GDB includes an already formatted copy of the on-line Info version
of this manual in the `gdb/doc' subdirectory.  The main Info file is
`gdb-6.3/gdb/doc/gdb.info', and it refers to subordinate files
matching `gdb.info*' in the same directory.  If necessary, you can
print out these files, or read them with any editor; but they are
easier to read using the `info' subsystem in GNU Emacs or the
standalone `info' program, available as part of the GNU Texinfo
distribution.

   If you want to format these Info files yourself, you need one of the
Info formatting programs, such as `texinfo-format-buffer' or
`makeinfo'.

   If you have `makeinfo' installed, and are in the top level GDB
source directory (`gdb-6.3', in the case of version 6.3), you can make
the Info file by typing:

      cd gdb/doc
      make info

   If you want to typeset and print copies of this manual, you need
TeX, a program to print its DVI output files, and `texinfo.tex', the
Texinfo definitions file.  This file is included in the GDB
distribution, in the directory `gdb-6.3/texinfo'.

   TeX is a typesetting program; it does not print files directly, but
produces output files called DVI files.  To print a typeset document,
you need a program to print DVI files.  If your system has TeX
installed, chances are it has such a program.  The precise command to
use depends on your system; `lpr -d' is common; another (for PostScript
devices) is `dvips'.  The DVI print command may require a file name
without any extension or a `.dvi' extension.

   TeX also requires a macro definitions file called `texinfo.tex'. 
This file tells TeX how to typeset a document written in Texinfo
format.  On its own, TeX cannot read, much less typeset a Texinfo file.
 `texinfo.tex' is distributed with GDB and is located in the
`gdb-6.3/texinfo' directory.

   If you have TeX and a DVI printer program installed, you can typeset
and print this manual.  First switch to the the `gdb' subdirectory of
the main source directory (for example, to `gdb-6.3/gdb') and then type:

      make doc/gdb.dvi

   If you prefer to have the manual in PDF format, type this from the
`gdb/doc' subdirectory of the main source directory:

      make gdb.pdf

For this to work, you will need the PDFTeX package to be installed.


Installing GDB
**************

   GDB comes with a `configure' script that automates the process of
preparing GDB for installation; you can then use `make' to build the
`gdb' program.

   The GDB distribution includes all the source code you need for GDB in
a single directory, whose name is usually composed by appending the
version number to `gdb'.

   For example, the GDB version 6.3 distribution is in the `gdb-6.3'
directory.  That directory contains:

`gdb-6.3/{COPYING,COPYING.LIB}'
     Standard GNU license files.  Please read them.

`gdb-6.3/bfd'
     source for the Binary File Descriptor library

`gdb-6.3/config*'
     script for configuring GDB, along with other support files

`gdb-6.3/gdb'
     the source specific to GDB itself

`gdb-6.3/include'
     GNU include files

`gdb-6.3/libiberty'
     source for the `-liberty' free software library

`gdb-6.3/opcodes'
     source for the library of opcode tables and disassemblers

`gdb-6.3/readline'
     source for the GNU command-line interface
     NOTE:  The readline library is compiled for use by GDB, but will
     not be installed on your system when "make install" is issued.

`gdb-6.3/sim'
     source for some simulators (ARM, D10V, SPARC, M32R, MIPS, PPC, V850, etc)

`gdb-6.3/texinfo'
     The `texinfo.tex' file, which you need in order to make a printed
     manual using TeX.

`gdb-6.3/etc'
     Coding standards, useful files for editing GDB, and other
     miscellanea.

   Note: the following instructions are for building GDB on Unix or
Unix-like systems.  Instructions for building with DJGPP for
MS-DOS/MS-Windows are in the file gdb/config/djgpp/README.

   The simplest way to configure and build GDB is to run `configure'
from the `gdb-VERSION-NUMBER' source directory, which in this example
is the `gdb-6.3' directory.

   First switch to the `gdb-VERSION-NUMBER' source directory if you are
not already in it; then run `configure'.

   For example:

      cd gdb-6.3
      ./configure
      make

   Running `configure' followed by `make' builds the `bfd',
`readline', `mmalloc', and `libiberty' libraries, then `gdb' itself.
The configured source files, and the binaries, are left in the
corresponding source directories.

   `configure' is a Bourne-shell (`/bin/sh') script; if your system
does not recognize this automatically when you run a different shell,
you may need to run `sh' on it explicitly:

      sh configure

   If you run `configure' from a directory that contains source
directories for multiple libraries or programs, such as the `gdb-6.3'
source directory for version 6.3, `configure' creates configuration
files for every directory level underneath (unless you tell it not to,
with the `--norecursion' option).

   You can run the `configure' script from any of the subordinate
directories in the GDB distribution, if you only want to configure that
subdirectory; but be sure to specify a path to it.

   For example, with version 6.3, type the following to configure only
the `bfd' subdirectory:

      cd gdb-6.3/bfd
      ../configure

   You can install `gdb' anywhere; it has no hardwired paths. However,
you should make sure that the shell on your path (named by the `SHELL'
environment variable) is publicly readable.  Remember that GDB uses the
shell to start your program--some systems refuse to let GDB debug child
processes whose programs are not readable.


Compiling GDB in another directory
==================================

   If you want to run GDB versions for several host or target machines,
you need a different `gdb' compiled for each combination of host and
target.  `configure' is designed to make this easy by allowing you to
generate each configuration in a separate subdirectory, rather than in
the source directory.  If your `make' program handles the `VPATH'
feature correctly (GNU `make' and SunOS 'make' are two that should),
running `make' in each of these directories builds the `gdb' program
specified there.

   To build `gdb' in a separate directory, run `configure' with the
`--srcdir' option to specify where to find the source. (You also need
to specify a path to find `configure' itself from your working
directory.  If the path to `configure' would be the same as the
argument to `--srcdir', you can leave out the `--srcdir' option; it
will be assumed.)

   For example, with version 6.3, you can build GDB in a separate
directory for a Sun 4 like this:

     cd gdb-6.3
     mkdir ../gdb-sun4
     cd ../gdb-sun4
     ../gdb-6.3/configure
     make

   When `configure' builds a configuration using a remote source
directory, it creates a tree for the binaries with the same structure
(and using the same names) as the tree under the source directory.  In
the example, you'd find the Sun 4 library `libiberty.a' in the
directory `gdb-sun4/libiberty', and GDB itself in `gdb-sun4/gdb'.

   One popular reason to build several GDB configurations in separate
directories is to configure GDB for cross-compiling (where GDB runs on
one machine--the host--while debugging programs that run on another
machine--the target).  You specify a cross-debugging target by giving
the `--target=TARGET' option to `configure'.

   When you run `make' to build a program or library, you must run it
in a configured directory--whatever directory you were in when you
called `configure' (or one of its subdirectories).

   The `Makefile' that `configure' generates in each source directory
also runs recursively.  If you type `make' in a source directory such
as `gdb-6.3' (or in a separate configured directory configured with
`--srcdir=PATH/gdb-6.3'), you will build all the required libraries,
and then build GDB.

   When you have multiple hosts or targets configured in separate
directories, you can run `make' on them in parallel (for example, if
they are NFS-mounted on each of the hosts); they will not interfere
with each other.


Specifying names for hosts and targets
======================================

   The specifications used for hosts and targets in the `configure'
script are based on a three-part naming scheme, but some short
predefined aliases are also supported.  The full naming scheme encodes
three pieces of information in the following pattern:

     ARCHITECTURE-VENDOR-OS

   For example, you can use the alias `sun4' as a HOST argument or in a
`--target=TARGET' option.  The equivalent full name is
`sparc-sun-sunos4'.

   The `configure' script accompanying GDB does not provide any query
facility to list all supported host and target names or aliases. 
`configure' calls the Bourne shell script `config.sub' to map
abbreviations to full names; you can read the script, if you wish, or
you can use it to test your guesses on abbreviations--for example:

     % sh config.sub sun4
     sparc-sun-sunos4.1.1
     % sh config.sub sun3
     m68k-sun-sunos4.1.1
     % sh config.sub decstation
     mips-dec-ultrix4.2
     % sh config.sub hp300bsd
     m68k-hp-bsd
     % sh config.sub i386v
     i386-pc-sysv
     % sh config.sub i786v
     Invalid configuration `i786v': machine `i786v' not recognized

`config.sub' is also distributed in the GDB source directory
(`gdb-6.3', for version 6.3).


`configure' options
===================

   Here is a summary of the `configure' options and arguments that are
most often useful for building GDB.  `configure' also has several other
options not listed here.  *note : (configure.info)What Configure Does,
for a full explanation of `configure'.

     configure [--help]
               [--prefix=DIR]
               [--srcdir=PATH]
               [--norecursion] [--rm]
	       [--enable-build-warnings]
               [--target=TARGET]
	       [--host=HOST]
	       [HOST]

You may introduce options with a single `-' rather than `--' if you
prefer; but you may abbreviate option names if you use `--'.

`--help'
     Display a quick summary of how to invoke `configure'.

`-prefix=DIR'
     Configure the source to install programs and files under directory
     `DIR'.

`--srcdir=PATH'
     *Warning: using this option requires GNU `make', or another `make'
     that compatibly implements the `VPATH' feature.*
     Use this option to make configurations in directories separate
     from the GDB source directories.  Among other things, you can use
     this to build (or maintain) several configurations simultaneously,
     in separate directories.  `configure' writes configuration
     specific files in the current directory, but arranges for them to
     use the source in the directory PATH.  `configure' will create
     directories under the working directory in parallel to the source
     directories below PATH.

`--norecursion'
     Configure only the directory level where `configure' is executed;
     do not propagate configuration to subdirectories.

`--rm'
     Remove the configuration that the other arguments specify.

`--enable-build-warnings'
     When building the GDB sources, ask the compiler to warn about any
     code which looks even vaguely suspicious.  You should only using
     this feature if you're compiling with GNU CC.  It passes the
     following flags:
	-Wimplicit
	-Wreturn-type
	-Wcomment
	-Wtrigraphs
	-Wformat
	-Wparentheses
	-Wpointer-arith

`--target=TARGET'
     Configure GDB for cross-debugging programs running on the specified
     TARGET.  Without this option, GDB is configured to debug programs
     that run on the same machine (HOST) as GDB itself.

     There is no convenient way to generate a list of all available
     targets.

`--host=HOST'
     Configure GDB to run on the specified HOST.

     There is no convenient way to generate a list of all available
     hosts.

`HOST ...'
     Same as `--host=HOST'.  If you omit this, GDB will guess; it's
     quite accurate.

`configure' accepts other options, for compatibility with configuring
other GNU tools recursively; but these are the only options that affect
GDB or its supporting libraries.


Remote debugging
=================

   The files m68k-stub.c, i386-stub.c, and sparc-stub.c are examples
of remote stubs to be used with remote.c.  They are designed to run
standalone on an m68k, i386, or SPARC cpu and communicate properly
with the remote.c stub over a serial line.

   The directory gdb/gdbserver/ contains `gdbserver', a program that
allows remote debugging for Unix applications.  gdbserver is only
supported for some native configurations, including Sun 3, Sun 4, and
Linux.

   There are a number of remote interfaces for talking to existing ROM
monitors and other hardware:

	remote-e7000.c	 Renesas E7000 ICE
	remote-est.c	 EST emulator
	remote-hms.c	 Renesas Micro Systems H8/300 monitor
	remote-mips.c	 MIPS remote debugging protocol
	remote-rdi.c	 ARM with Angel monitor
	remote-rdp.c	 ARM with Demon monitor
	remote-sds.c	 PowerPC SDS monitor
	remote-sim.c	 Generalized simulator protocol
	remote-st.c	 Tandem ST-2000 monitor
	remote-vx.c	 VxWorks realtime kernel

   Remote-vx.c and the vx-share subdirectory contain a remote
interface for the VxWorks realtime kernel, which communicates over TCP
using the Sun RPC library.  This would be a useful starting point for
other remote- via-ethernet back ends.


Reporting Bugs in GDB
=====================

   There are several ways of reporting bugs in GDB.  The prefered
method is to use the World Wide Web:

      http://www.gnu.org/software/gdb/bugs/

As an alternative, the bug report can be submitted, via e-mail, to the
address "bug-gdb@gnu.org".

   When submitting a bug, please include the GDB version number (e.g.,
gdb-6.3), and how you configured it (e.g., "sun4" or "mach386 host,
i586-intel-synopsys target").  Since GDB now supports so many
different configurations, it is important that you be precise about
this.  If at all possible, you should include the actual banner that
GDB prints when it starts up, or failing that, the actual configure
command that you used when configuring GDB.

   For more information on how/whether to report bugs, see the
Reporting Bugs chapter of the GDB manual (gdb/doc/gdb.texinfo).


Graphical interface to GDB -- X Windows, MS Windows
==========================

   Several graphical interfaces to GDB are available.  You should
check:

	http://www.gnu.org/software/gdb/links/

for an up-to-date list.

   Emacs users will very likely enjoy the Grand Unified Debugger mode;
try typing `M-x gdb RET'.


Writing Code for GDB
=====================

   There is a lot of information about writing code for GDB in the
internals manual, distributed with GDB in gdb/doc/gdbint.texinfo.  You
can read it by hand, print it by using TeX and texinfo, or process it
into an `info' file for use with Emacs' info mode or the standalone
`info' program.

   If you are pondering writing anything but a short patch, especially
take note of the information about copyrights in the node Submitting
Patches.  It can take quite a while to get all the paperwork done, so
we encourage you to start that process as soon as you decide you are
planning to work on something, or at least well ahead of when you
think you will be ready to submit the patches.


GDB Testsuite
=============

   Included with the GDB distribution is a DejaGNU based testsuite
that can either be used to test your newly built GDB, or for
regression testing a GDB with local modifications.

   Running the testsuite requires the prior installation of DejaGNU,
which is generally available via ftp.  The directory
ftp://sources.redhat.com/pub/dejagnu/ will contain a recent snapshot.
Once DejaGNU is installed, you can run the tests in one of the
following ways:

  (1)	cd gdb-6.3
	make check-gdb

or

  (2)	cd gdb-6.3/gdb
	make check

or

  (3)	cd gdb-6.3/gdb/testsuite
	make site.exp	(builds the site specific file)
	runtest -tool gdb GDB=../gdb    (or GDB=<somepath> as appropriate)

The last method gives you slightly more control in case of problems
with building one or more test executables or if you are using the
testsuite `standalone', without it being part of the GDB source tree.

See the DejaGNU documentation for further details.


(this is for editing this file with GNU emacs)
Local Variables:
mode: text
End: