binutils-gdb/gdb/objfiles.c
Elena Zannoni 8b92e4d54f 2004-02-07 Elena Zannoni <ezannoni@redhat.com>
* dbxread.c (dbx_symfile_init, start_psymtab, end_psymtab,
	coffstab_build_psymtabs, elfstab_build_psymtabs)
	(stabsect_build_psymtabs): Replace psymbol_obstack with
	objfile_obstack.
	* dwarf2-frame.c (decode_frame_entry_1): Ditto.
	* dwarf2read.c (dwarf2_build_psymtabs_hard, dwarf2_read_section):
	Ditto.
	* dwarfread.c (scan_compilation_units): Ditto.
	* elfread.c (elfstab_offset_sections): Ditto.
	* hppa-tdep.c (read_unwind_info): Ditto.
	* hpread.c (hpread_build_psymtabs, hpread_start_psymtab)
	(hpread_end_psymtab): Ditto.
	* mdebugread.c (mdebug_build_psymtabs, add_pending)
	(parse_partial_symbols, new_psymtab, elfmdebug_build_psymtabs):
	Ditto.
	* mips-tdep.c (non_heuristic_proc_desc): Ditto.
	* objfiles.c (add_to_objfile_sections)
	(build_objfile_section_table): Ditto.
	(allocate_objfile): Remove init of psymbol_obstack.
	(free_objfile): Remove freeing of psymbol_obstack.
	* objfiles.h (struct objfile): Remove field
	psymbol_obstack. Update comments.
	* pa64solib.c (pa64_solib_add_solib_objfile): Replace
	psymbol_obstack with objfile_obstack.
	* solib-sunos.c (allocate_rt_common_objfile): Remove init of
        psymbol_obstack.
	* somread.c (som_symfile_offsets, init_import_symbols)
	(init_export_symbols): Replace psymbol_obstack with
	objfile_obstack.
	* somsolib.c (som_solib_add_solib_objfile): Ditto.
	* symfile.c (default_symfile_offsets, syms_from_objfile)
	(reread_symbols): Remove freeing and init of psymbol_obstack.
	(cashier_psymtab): Update comment.
	* symmisc.c (print_objfile_statistics): Don't report stats for
	psymbol obstack.
	* symtab.h (struct general_symbol_info, struct partial_symtab):
	Update comments.
	* xcoffread.c (xcoff_start_psymtab, xcoff_end_psymtab, swap_sym)
	(xcoff_symfile_offsets): Replace psymbol_obstack with
	objfile_obstack.
2004-02-07 18:29:54 +00:00

870 lines
24 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* GDB routines for manipulating objfiles.
Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
2001, 2002, 2003, 2004 Free Software Foundation, Inc.
Contributed by Cygnus Support, using pieces from other GDB modules.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
/* This file contains support routines for creating, manipulating, and
destroying objfile structures. */
#include "defs.h"
#include "bfd.h" /* Binary File Description */
#include "symtab.h"
#include "symfile.h"
#include "objfiles.h"
#include "gdb-stabs.h"
#include "target.h"
#include "bcache.h"
#include "gdb_assert.h"
#include <sys/types.h>
#include "gdb_stat.h"
#include <fcntl.h>
#include "gdb_obstack.h"
#include "gdb_string.h"
#include "hashtab.h"
#include "breakpoint.h"
#include "block.h"
#include "dictionary.h"
/* Prototypes for local functions */
static void objfile_alloc_data (struct objfile *objfile);
static void objfile_free_data (struct objfile *objfile);
/* Externally visible variables that are owned by this module.
See declarations in objfile.h for more info. */
struct objfile *object_files; /* Linked list of all objfiles */
struct objfile *current_objfile; /* For symbol file being read in */
struct objfile *symfile_objfile; /* Main symbol table loaded from */
struct objfile *rt_common_objfile; /* For runtime common symbols */
/* Locate all mappable sections of a BFD file.
objfile_p_char is a char * to get it through
bfd_map_over_sections; we cast it back to its proper type. */
#ifndef TARGET_KEEP_SECTION
#define TARGET_KEEP_SECTION(ASECT) 0
#endif
/* Called via bfd_map_over_sections to build up the section table that
the objfile references. The objfile contains pointers to the start
of the table (objfile->sections) and to the first location after
the end of the table (objfile->sections_end). */
static void
add_to_objfile_sections (struct bfd *abfd, struct bfd_section *asect,
void *objfile_p_char)
{
struct objfile *objfile = (struct objfile *) objfile_p_char;
struct obj_section section;
flagword aflag;
aflag = bfd_get_section_flags (abfd, asect);
if (!(aflag & SEC_ALLOC) && !(TARGET_KEEP_SECTION (asect)))
return;
if (0 == bfd_section_size (abfd, asect))
return;
section.offset = 0;
section.objfile = objfile;
section.the_bfd_section = asect;
section.ovly_mapped = 0;
section.addr = bfd_section_vma (abfd, asect);
section.endaddr = section.addr + bfd_section_size (abfd, asect);
obstack_grow (&objfile->objfile_obstack, (char *) &section, sizeof (section));
objfile->sections_end = (struct obj_section *) (((unsigned long) objfile->sections_end) + 1);
}
/* Builds a section table for OBJFILE.
Returns 0 if OK, 1 on error (in which case bfd_error contains the
error).
Note that while we are building the table, which goes into the
psymbol obstack, we hijack the sections_end pointer to instead hold
a count of the number of sections. When bfd_map_over_sections
returns, this count is used to compute the pointer to the end of
the sections table, which then overwrites the count.
Also note that the OFFSET and OVLY_MAPPED in each table entry
are initialized to zero.
Also note that if anything else writes to the psymbol obstack while
we are building the table, we're pretty much hosed. */
int
build_objfile_section_table (struct objfile *objfile)
{
/* objfile->sections can be already set when reading a mapped symbol
file. I believe that we do need to rebuild the section table in
this case (we rebuild other things derived from the bfd), but we
can't free the old one (it's in the objfile_obstack). So we just
waste some memory. */
objfile->sections_end = 0;
bfd_map_over_sections (objfile->obfd, add_to_objfile_sections, (char *) objfile);
objfile->sections = (struct obj_section *)
obstack_finish (&objfile->objfile_obstack);
objfile->sections_end = objfile->sections + (unsigned long) objfile->sections_end;
return (0);
}
/* Given a pointer to an initialized bfd (ABFD) and some flag bits
allocate a new objfile struct, fill it in as best we can, link it
into the list of all known objfiles, and return a pointer to the
new objfile struct.
The FLAGS word contains various bits (OBJF_*) that can be taken as
requests for specific operations. Other bits like OBJF_SHARED are
simply copied through to the new objfile flags member. */
/* NOTE: carlton/2003-02-04: This function is called with args NULL, 0
by jv-lang.c, to create an artificial objfile used to hold
information about dynamically-loaded Java classes. Unfortunately,
that branch of this function doesn't get tested very frequently, so
it's prone to breakage. (E.g. at one time the name was set to NULL
in that situation, which broke a loop over all names in the dynamic
library loader.) If you change this function, please try to leave
things in a consistent state even if abfd is NULL. */
struct objfile *
allocate_objfile (bfd *abfd, int flags)
{
struct objfile *objfile = NULL;
struct objfile *last_one = NULL;
/* If we don't support mapped symbol files, didn't ask for the file to be
mapped, or failed to open the mapped file for some reason, then revert
back to an unmapped objfile. */
if (objfile == NULL)
{
objfile = (struct objfile *) xmalloc (sizeof (struct objfile));
memset (objfile, 0, sizeof (struct objfile));
objfile->md = NULL;
objfile->psymbol_cache = bcache_xmalloc ();
objfile->macro_cache = bcache_xmalloc ();
obstack_specify_allocation (&objfile->objfile_obstack, 0, 0, xmalloc,
xfree);
obstack_specify_allocation (&objfile->symbol_obstack, 0, 0, xmalloc,
xfree);
terminate_minimal_symbol_table (objfile);
}
objfile_alloc_data (objfile);
/* Update the per-objfile information that comes from the bfd, ensuring
that any data that is reference is saved in the per-objfile data
region. */
objfile->obfd = abfd;
if (objfile->name != NULL)
{
xmfree (objfile->md, objfile->name);
}
if (abfd != NULL)
{
objfile->name = mstrsave (objfile->md, bfd_get_filename (abfd));
objfile->mtime = bfd_get_mtime (abfd);
/* Build section table. */
if (build_objfile_section_table (objfile))
{
error ("Can't find the file sections in `%s': %s",
objfile->name, bfd_errmsg (bfd_get_error ()));
}
}
else
{
objfile->name = mstrsave (objfile->md, "<<anonymous objfile>>");
}
/* Initialize the section indexes for this objfile, so that we can
later detect if they are used w/o being properly assigned to. */
objfile->sect_index_text = -1;
objfile->sect_index_data = -1;
objfile->sect_index_bss = -1;
objfile->sect_index_rodata = -1;
/* We don't yet have a C++-specific namespace symtab. */
objfile->cp_namespace_symtab = NULL;
/* Add this file onto the tail of the linked list of other such files. */
objfile->next = NULL;
if (object_files == NULL)
object_files = objfile;
else
{
for (last_one = object_files;
last_one->next;
last_one = last_one->next);
last_one->next = objfile;
}
/* Save passed in flag bits. */
objfile->flags |= flags;
return (objfile);
}
/* Create the terminating entry of OBJFILE's minimal symbol table.
If OBJFILE->msymbols is zero, allocate a single entry from
OBJFILE->symbol_obstack; otherwise, just initialize
OBJFILE->msymbols[OBJFILE->minimal_symbol_count]. */
void
terminate_minimal_symbol_table (struct objfile *objfile)
{
if (! objfile->msymbols)
objfile->msymbols = ((struct minimal_symbol *)
obstack_alloc (&objfile->symbol_obstack,
sizeof (objfile->msymbols[0])));
{
struct minimal_symbol *m
= &objfile->msymbols[objfile->minimal_symbol_count];
memset (m, 0, sizeof (*m));
DEPRECATED_SYMBOL_NAME (m) = NULL;
SYMBOL_VALUE_ADDRESS (m) = 0;
MSYMBOL_INFO (m) = NULL;
MSYMBOL_SIZE (m) = 0;
MSYMBOL_TYPE (m) = mst_unknown;
SYMBOL_INIT_LANGUAGE_SPECIFIC (m, language_unknown);
}
}
/* Put one object file before a specified on in the global list.
This can be used to make sure an object file is destroyed before
another when using ALL_OBJFILES_SAFE to free all objfiles. */
void
put_objfile_before (struct objfile *objfile, struct objfile *before_this)
{
struct objfile **objp;
unlink_objfile (objfile);
for (objp = &object_files; *objp != NULL; objp = &((*objp)->next))
{
if (*objp == before_this)
{
objfile->next = *objp;
*objp = objfile;
return;
}
}
internal_error (__FILE__, __LINE__,
"put_objfile_before: before objfile not in list");
}
/* Put OBJFILE at the front of the list. */
void
objfile_to_front (struct objfile *objfile)
{
struct objfile **objp;
for (objp = &object_files; *objp != NULL; objp = &((*objp)->next))
{
if (*objp == objfile)
{
/* Unhook it from where it is. */
*objp = objfile->next;
/* Put it in the front. */
objfile->next = object_files;
object_files = objfile;
break;
}
}
}
/* Unlink OBJFILE from the list of known objfiles, if it is found in the
list.
It is not a bug, or error, to call this function if OBJFILE is not known
to be in the current list. This is done in the case of mapped objfiles,
for example, just to ensure that the mapped objfile doesn't appear twice
in the list. Since the list is threaded, linking in a mapped objfile
twice would create a circular list.
If OBJFILE turns out to be in the list, we zap it's NEXT pointer after
unlinking it, just to ensure that we have completely severed any linkages
between the OBJFILE and the list. */
void
unlink_objfile (struct objfile *objfile)
{
struct objfile **objpp;
for (objpp = &object_files; *objpp != NULL; objpp = &((*objpp)->next))
{
if (*objpp == objfile)
{
*objpp = (*objpp)->next;
objfile->next = NULL;
return;
}
}
internal_error (__FILE__, __LINE__,
"unlink_objfile: objfile already unlinked");
}
/* Destroy an objfile and all the symtabs and psymtabs under it. Note
that as much as possible is allocated on the symbol_obstack and
objfile_obstack, so that the memory can be efficiently freed.
Things which we do NOT free because they are not in malloc'd memory
or not in memory specific to the objfile include:
objfile -> sf
FIXME: If the objfile is using reusable symbol information (via mmalloc),
then we need to take into account the fact that more than one process
may be using the symbol information at the same time (when mmalloc is
extended to support cooperative locking). When more than one process
is using the mapped symbol info, we need to be more careful about when
we free objects in the reusable area. */
void
free_objfile (struct objfile *objfile)
{
if (objfile->separate_debug_objfile)
{
free_objfile (objfile->separate_debug_objfile);
}
if (objfile->separate_debug_objfile_backlink)
{
/* We freed the separate debug file, make sure the base objfile
doesn't reference it. */
objfile->separate_debug_objfile_backlink->separate_debug_objfile = NULL;
}
/* First do any symbol file specific actions required when we are
finished with a particular symbol file. Note that if the objfile
is using reusable symbol information (via mmalloc) then each of
these routines is responsible for doing the correct thing, either
freeing things which are valid only during this particular gdb
execution, or leaving them to be reused during the next one. */
if (objfile->sf != NULL)
{
(*objfile->sf->sym_finish) (objfile);
}
/* We always close the bfd. */
if (objfile->obfd != NULL)
{
char *name = bfd_get_filename (objfile->obfd);
if (!bfd_close (objfile->obfd))
warning ("cannot close \"%s\": %s",
name, bfd_errmsg (bfd_get_error ()));
xfree (name);
}
/* Remove it from the chain of all objfiles. */
unlink_objfile (objfile);
/* If we are going to free the runtime common objfile, mark it
as unallocated. */
if (objfile == rt_common_objfile)
rt_common_objfile = NULL;
/* Before the symbol table code was redone to make it easier to
selectively load and remove information particular to a specific
linkage unit, gdb used to do these things whenever the monolithic
symbol table was blown away. How much still needs to be done
is unknown, but we play it safe for now and keep each action until
it is shown to be no longer needed. */
/* I *think* all our callers call clear_symtab_users. If so, no need
to call this here. */
clear_pc_function_cache ();
/* The last thing we do is free the objfile struct itself. */
objfile_free_data (objfile);
if (objfile->name != NULL)
{
xmfree (objfile->md, objfile->name);
}
if (objfile->global_psymbols.list)
xmfree (objfile->md, objfile->global_psymbols.list);
if (objfile->static_psymbols.list)
xmfree (objfile->md, objfile->static_psymbols.list);
/* Free the obstacks for non-reusable objfiles */
bcache_xfree (objfile->psymbol_cache);
bcache_xfree (objfile->macro_cache);
if (objfile->demangled_names_hash)
htab_delete (objfile->demangled_names_hash);
obstack_free (&objfile->objfile_obstack, 0);
obstack_free (&objfile->symbol_obstack, 0);
xmfree (objfile->md, objfile);
objfile = NULL;
}
static void
do_free_objfile_cleanup (void *obj)
{
free_objfile (obj);
}
struct cleanup *
make_cleanup_free_objfile (struct objfile *obj)
{
return make_cleanup (do_free_objfile_cleanup, obj);
}
/* Free all the object files at once and clean up their users. */
void
free_all_objfiles (void)
{
struct objfile *objfile, *temp;
ALL_OBJFILES_SAFE (objfile, temp)
{
free_objfile (objfile);
}
clear_symtab_users ();
}
/* Relocate OBJFILE to NEW_OFFSETS. There should be OBJFILE->NUM_SECTIONS
entries in new_offsets. */
void
objfile_relocate (struct objfile *objfile, struct section_offsets *new_offsets)
{
struct section_offsets *delta =
((struct section_offsets *)
alloca (SIZEOF_N_SECTION_OFFSETS (objfile->num_sections)));
{
int i;
int something_changed = 0;
for (i = 0; i < objfile->num_sections; ++i)
{
delta->offsets[i] =
ANOFFSET (new_offsets, i) - ANOFFSET (objfile->section_offsets, i);
if (ANOFFSET (delta, i) != 0)
something_changed = 1;
}
if (!something_changed)
return;
}
/* OK, get all the symtabs. */
{
struct symtab *s;
ALL_OBJFILE_SYMTABS (objfile, s)
{
struct linetable *l;
struct blockvector *bv;
int i;
/* First the line table. */
l = LINETABLE (s);
if (l)
{
for (i = 0; i < l->nitems; ++i)
l->item[i].pc += ANOFFSET (delta, s->block_line_section);
}
/* Don't relocate a shared blockvector more than once. */
if (!s->primary)
continue;
bv = BLOCKVECTOR (s);
for (i = 0; i < BLOCKVECTOR_NBLOCKS (bv); ++i)
{
struct block *b;
struct symbol *sym;
struct dict_iterator iter;
b = BLOCKVECTOR_BLOCK (bv, i);
BLOCK_START (b) += ANOFFSET (delta, s->block_line_section);
BLOCK_END (b) += ANOFFSET (delta, s->block_line_section);
ALL_BLOCK_SYMBOLS (b, iter, sym)
{
fixup_symbol_section (sym, objfile);
/* The RS6000 code from which this was taken skipped
any symbols in STRUCT_DOMAIN or UNDEF_DOMAIN.
But I'm leaving out that test, on the theory that
they can't possibly pass the tests below. */
if ((SYMBOL_CLASS (sym) == LOC_LABEL
|| SYMBOL_CLASS (sym) == LOC_STATIC
|| SYMBOL_CLASS (sym) == LOC_INDIRECT)
&& SYMBOL_SECTION (sym) >= 0)
{
SYMBOL_VALUE_ADDRESS (sym) +=
ANOFFSET (delta, SYMBOL_SECTION (sym));
}
#ifdef MIPS_EFI_SYMBOL_NAME
/* Relocate Extra Function Info for ecoff. */
else if (SYMBOL_CLASS (sym) == LOC_CONST
&& SYMBOL_DOMAIN (sym) == LABEL_DOMAIN
&& strcmp (DEPRECATED_SYMBOL_NAME (sym), MIPS_EFI_SYMBOL_NAME) == 0)
ecoff_relocate_efi (sym, ANOFFSET (delta,
s->block_line_section));
#endif
}
}
}
}
{
struct partial_symtab *p;
ALL_OBJFILE_PSYMTABS (objfile, p)
{
p->textlow += ANOFFSET (delta, SECT_OFF_TEXT (objfile));
p->texthigh += ANOFFSET (delta, SECT_OFF_TEXT (objfile));
}
}
{
struct partial_symbol **psym;
for (psym = objfile->global_psymbols.list;
psym < objfile->global_psymbols.next;
psym++)
{
fixup_psymbol_section (*psym, objfile);
if (SYMBOL_SECTION (*psym) >= 0)
SYMBOL_VALUE_ADDRESS (*psym) += ANOFFSET (delta,
SYMBOL_SECTION (*psym));
}
for (psym = objfile->static_psymbols.list;
psym < objfile->static_psymbols.next;
psym++)
{
fixup_psymbol_section (*psym, objfile);
if (SYMBOL_SECTION (*psym) >= 0)
SYMBOL_VALUE_ADDRESS (*psym) += ANOFFSET (delta,
SYMBOL_SECTION (*psym));
}
}
{
struct minimal_symbol *msym;
ALL_OBJFILE_MSYMBOLS (objfile, msym)
if (SYMBOL_SECTION (msym) >= 0)
SYMBOL_VALUE_ADDRESS (msym) += ANOFFSET (delta, SYMBOL_SECTION (msym));
}
/* Relocating different sections by different amounts may cause the symbols
to be out of order. */
msymbols_sort (objfile);
{
int i;
for (i = 0; i < objfile->num_sections; ++i)
(objfile->section_offsets)->offsets[i] = ANOFFSET (new_offsets, i);
}
if (objfile->ei.entry_point != ~(CORE_ADDR) 0)
{
/* Relocate ei.entry_point with its section offset, use SECT_OFF_TEXT
only as a fallback. */
struct obj_section *s;
s = find_pc_section (objfile->ei.entry_point);
if (s)
objfile->ei.entry_point += ANOFFSET (delta, s->the_bfd_section->index);
else
objfile->ei.entry_point += ANOFFSET (delta, SECT_OFF_TEXT (objfile));
}
{
struct obj_section *s;
bfd *abfd;
abfd = objfile->obfd;
ALL_OBJFILE_OSECTIONS (objfile, s)
{
int idx = s->the_bfd_section->index;
s->addr += ANOFFSET (delta, idx);
s->endaddr += ANOFFSET (delta, idx);
}
}
if (objfile->ei.entry_func_lowpc != INVALID_ENTRY_LOWPC)
{
objfile->ei.entry_func_lowpc += ANOFFSET (delta, SECT_OFF_TEXT (objfile));
objfile->ei.entry_func_highpc += ANOFFSET (delta, SECT_OFF_TEXT (objfile));
}
if (objfile->ei.deprecated_entry_file_lowpc != INVALID_ENTRY_LOWPC)
{
objfile->ei.deprecated_entry_file_lowpc += ANOFFSET (delta, SECT_OFF_TEXT (objfile));
objfile->ei.deprecated_entry_file_highpc += ANOFFSET (delta, SECT_OFF_TEXT (objfile));
}
if (objfile->ei.main_func_lowpc != INVALID_ENTRY_LOWPC)
{
objfile->ei.main_func_lowpc += ANOFFSET (delta, SECT_OFF_TEXT (objfile));
objfile->ei.main_func_highpc += ANOFFSET (delta, SECT_OFF_TEXT (objfile));
}
/* Relocate breakpoints as necessary, after things are relocated. */
breakpoint_re_set ();
}
/* Many places in gdb want to test just to see if we have any partial
symbols available. This function returns zero if none are currently
available, nonzero otherwise. */
int
have_partial_symbols (void)
{
struct objfile *ofp;
ALL_OBJFILES (ofp)
{
if (ofp->psymtabs != NULL)
{
return 1;
}
}
return 0;
}
/* Many places in gdb want to test just to see if we have any full
symbols available. This function returns zero if none are currently
available, nonzero otherwise. */
int
have_full_symbols (void)
{
struct objfile *ofp;
ALL_OBJFILES (ofp)
{
if (ofp->symtabs != NULL)
{
return 1;
}
}
return 0;
}
/* This operations deletes all objfile entries that represent solibs that
weren't explicitly loaded by the user, via e.g., the add-symbol-file
command.
*/
void
objfile_purge_solibs (void)
{
struct objfile *objf;
struct objfile *temp;
ALL_OBJFILES_SAFE (objf, temp)
{
/* We assume that the solib package has been purged already, or will
be soon.
*/
if (!(objf->flags & OBJF_USERLOADED) && (objf->flags & OBJF_SHARED))
free_objfile (objf);
}
}
/* Many places in gdb want to test just to see if we have any minimal
symbols available. This function returns zero if none are currently
available, nonzero otherwise. */
int
have_minimal_symbols (void)
{
struct objfile *ofp;
ALL_OBJFILES (ofp)
{
if (ofp->minimal_symbol_count > 0)
{
return 1;
}
}
return 0;
}
/* Returns a section whose range includes PC and SECTION, or NULL if
none found. Note the distinction between the return type, struct
obj_section (which is defined in gdb), and the input type "struct
bfd_section" (which is a bfd-defined data type). The obj_section
contains a pointer to the "struct bfd_section". */
struct obj_section *
find_pc_sect_section (CORE_ADDR pc, struct bfd_section *section)
{
struct obj_section *s;
struct objfile *objfile;
ALL_OBJSECTIONS (objfile, s)
if ((section == 0 || section == s->the_bfd_section) &&
s->addr <= pc && pc < s->endaddr)
return (s);
return (NULL);
}
/* Returns a section whose range includes PC or NULL if none found.
Backward compatibility, no section. */
struct obj_section *
find_pc_section (CORE_ADDR pc)
{
return find_pc_sect_section (pc, find_pc_mapped_section (pc));
}
/* In SVR4, we recognize a trampoline by it's section name.
That is, if the pc is in a section named ".plt" then we are in
a trampoline. */
int
in_plt_section (CORE_ADDR pc, char *name)
{
struct obj_section *s;
int retval = 0;
s = find_pc_section (pc);
retval = (s != NULL
&& s->the_bfd_section->name != NULL
&& strcmp (s->the_bfd_section->name, ".plt") == 0);
return (retval);
}
/* Return nonzero if NAME is in the import list of OBJFILE. Else
return zero. */
int
is_in_import_list (char *name, struct objfile *objfile)
{
int i;
if (!objfile || !name || !*name)
return 0;
for (i = 0; i < objfile->import_list_size; i++)
if (objfile->import_list[i] && DEPRECATED_STREQ (name, objfile->import_list[i]))
return 1;
return 0;
}
/* Keep a registry of per-objfile data-pointers required by other GDB
modules. */
struct objfile_data
{
unsigned index;
};
struct objfile_data_registration
{
struct objfile_data *data;
struct objfile_data_registration *next;
};
struct objfile_data_registry
{
struct objfile_data_registration *registrations;
unsigned num_registrations;
};
static struct objfile_data_registry objfile_data_registry = { NULL, 0 };
const struct objfile_data *
register_objfile_data (void)
{
struct objfile_data_registration **curr;
/* Append new registration. */
for (curr = &objfile_data_registry.registrations;
*curr != NULL; curr = &(*curr)->next);
*curr = XMALLOC (struct objfile_data_registration);
(*curr)->next = NULL;
(*curr)->data = XMALLOC (struct objfile_data);
(*curr)->data->index = objfile_data_registry.num_registrations++;
return (*curr)->data;
}
static void
objfile_alloc_data (struct objfile *objfile)
{
gdb_assert (objfile->data == NULL);
objfile->num_data = objfile_data_registry.num_registrations;
objfile->data = XCALLOC (objfile->num_data, void *);
}
static void
objfile_free_data (struct objfile *objfile)
{
gdb_assert (objfile->data != NULL);
xfree (objfile->data);
objfile->data = NULL;
}
void
clear_objfile_data (struct objfile *objfile)
{
gdb_assert (objfile->data != NULL);
memset (objfile->data, 0, objfile->num_data * sizeof (void *));
}
void
set_objfile_data (struct objfile *objfile, const struct objfile_data *data,
void *value)
{
gdb_assert (data->index < objfile->num_data);
objfile->data[data->index] = value;
}
void *
objfile_data (struct objfile *objfile, const struct objfile_data *data)
{
gdb_assert (data->index < objfile->num_data);
return objfile->data[data->index];
}