binutils-gdb/ld/emultempl/mipself.em
Chris Demetriou 7d0a848ef9 2002-06-18 Chris Demetriou <cgd@broadcom.com>
* emultempl/mipself.em (mips_elf${ELFSIZE}_check_sections): Check
	section flags for SEC_DATA, rather than for SEC_CODE being unset.
2002-06-19 05:34:56 +00:00

184 lines
6.2 KiB
Plaintext

# Copyright 2002 Free Software Foundation, Inc.
# Written by Mitch Lichtenberg <mpl@broadcom.com> and
# Chris Demetriou <cgd@broadcom.com> based on m68kelf.em and mipsecoff.em.
#
# This file is part of GLD, the Gnu Linker.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
# This shell script emits a C file. -*- C -*-
# This file is sourced from elf32.em, and defines some extra routines for m68k
# embedded systems using ELF and for some other systems using m68k ELF. While
# it is sourced from elf32.em for all m68k ELF configurations, here we include
# only the features we want depending on the configuration.
case ${target} in
mips*-*-elf)
echo "#define SUPPORT_EMBEDDED_RELOCS" >>e${EMULATION_NAME}.c
;;
esac
cat >>e${EMULATION_NAME}.c <<EOF
static void mips_elf${ELFSIZE}_after_open PARAMS ((void));
#ifdef SUPPORT_EMBEDDED_RELOCS
static void mips_elf${ELFSIZE}_check_sections PARAMS ((bfd *, asection *,
PTR));
#endif
static void mips_elf${ELFSIZE}_after_allocation PARAMS ((void));
/* This function is run after all the input files have been opened. */
static void
mips_elf${ELFSIZE}_after_open()
{
/* Call the standard elf routine. */
gld${EMULATION_NAME}_after_open ();
#ifdef SUPPORT_EMBEDDED_RELOCS
if (command_line.embedded_relocs && (! link_info.relocateable))
{
bfd *abfd;
/* In the embedded relocs mode we create a .rel.sdata section for
each input file with a .sdata section which has has
relocations. The BFD backend will fill in these sections
with magic numbers which can be used to relocate the data
section at run time. */
for (abfd = link_info.input_bfds; abfd != NULL; abfd = abfd->link_next)
{
asection *datasec;
/* As first-order business, make sure that each input BFD is
ELF. We need to call a special BFD backend function to
generate the embedded relocs, and we have that function
only for ELF */
if (bfd_get_flavour (abfd) != bfd_target_elf_flavour)
einfo ("%F%B: all input objects must be ELF for --embedded-relocs\n");
if (bfd_get_arch_size (abfd) != ${ELFSIZE})
einfo ("%F%B: all input objects must be ${ELFSIZE}-bit ELF for --embedded-relocs\n");
datasec = bfd_get_section_by_name (abfd, ".sdata");
/* Note that we assume that the reloc_count field has already
been set up. We could call bfd_get_reloc_upper_bound, but
that returns the size of a memory buffer rather than a reloc
count. We do not want to call bfd_canonicalize_reloc,
because although it would always work it would force us to
read in the relocs into BFD canonical form, which would waste
a significant amount of time and memory. */
if (datasec != NULL && datasec->reloc_count > 0)
{
asection *relsec;
relsec = bfd_make_section (abfd, ".rel.sdata");
if (relsec == NULL
|| ! bfd_set_section_flags (abfd, relsec,
(SEC_ALLOC
| SEC_LOAD
| SEC_HAS_CONTENTS
| SEC_IN_MEMORY))
|| ! bfd_set_section_alignment (abfd, relsec,
(${ELFSIZE} == 32) ? 2 : 3)
|| ! bfd_set_section_size (abfd, relsec,
datasec->reloc_count
* ((${ELFSIZE} / 8) + 8)))
einfo ("%F%B: cannot create .rel.sdata section: %E\n");
}
/* Double check that all other data sections have no relocs,
as is required for embedded PIC code. */
bfd_map_over_sections (abfd, mips_elf${ELFSIZE}_check_sections,
(PTR) datasec);
}
}
#endif /* SUPPORT_EMBEDDED_RELOCS */
}
#ifdef SUPPORT_EMBEDDED_RELOCS
/* Check that of the data sections, only the .sdata section has
relocs. This is called via bfd_map_over_sections. */
static void
mips_elf${ELFSIZE}_check_sections (abfd, sec, sdatasec)
bfd *abfd;
asection *sec;
PTR sdatasec;
{
if ((bfd_get_section_flags (abfd, sec) & SEC_DATA)
&& sec != (asection *) sdatasec
&& sec->reloc_count != 0)
einfo ("%B%X: section %s has relocs; cannot use --embedded-relocs\n",
abfd, bfd_get_section_name (abfd, sec));
}
#endif /* SUPPORT_EMBEDDED_RELOCS */
/* This function is called after the section sizes and offsets have
been set. If we are generating embedded relocs, it calls a special
BFD backend routine to do the work. */
static void
mips_elf${ELFSIZE}_after_allocation ()
{
/* Call the standard elf routine. */
after_allocation_default ();
#ifdef SUPPORT_EMBEDDED_RELOCS
if (command_line.embedded_relocs && (! link_info.relocateable))
{
bfd *abfd;
for (abfd = link_info.input_bfds; abfd != NULL; abfd = abfd->link_next)
{
asection *datasec, *relsec;
char *errmsg;
datasec = bfd_get_section_by_name (abfd, ".sdata");
if (datasec == NULL || datasec->reloc_count == 0)
continue;
relsec = bfd_get_section_by_name (abfd, ".rel.sdata");
ASSERT (relsec != NULL);
if (! bfd_mips_elf${ELFSIZE}_create_embedded_relocs (abfd,
&link_info,
datasec,
relsec,
&errmsg))
{
if (errmsg == NULL)
einfo ("%B%X: can not create runtime reloc information: %E\n",
abfd);
else
einfo ("%X%B: can not create runtime reloc information: %s\n",
abfd, errmsg);
}
}
}
#endif /* SUPPORT_EMBEDDED_RELOCS */
}
EOF
# We have our own after_open and after_allocation functions, but they call
# the standard routines, so give them a different name.
LDEMUL_AFTER_OPEN=mips_elf${ELFSIZE}_after_open
LDEMUL_AFTER_ALLOCATION=mips_elf${ELFSIZE}_after_allocation