mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2025-01-30 12:44:10 +08:00
c8693053f8
GDB currently doesn't build on 32-bit Solaris:
* On Solaris 11.4/x86:
In file included from /usr/include/sys/procfs.h:26,
from /vol/src/gnu/gdb/hg/master/dist/gdb/i386-sol2-nat.c:24:
/usr/include/sys/old_procfs.h:31:2: error: #error "Cannot use procfs in the large file compilation environment"
#error "Cannot use procfs in the large file compilation environment"
^~~~~
* On Solaris 11.3/x86 there are several more instances of this.
The interaction between procfs and large-file support historically has
been a royal mess on Solaris:
* There are two versions of the procfs interface:
** The old ioctl-based /proc, deprecated and not used any longer in
either gdb or binutils.
** The `new' (introduced in Solaris 2.6, 1997) structured /proc.
* There are two headers one can possibly include:
** <procfs.h> which only provides the structured /proc, definining
_STRUCTURED_PROC=1 and then including ...
** <sys/procfs.h> which defaults to _STRUCTURED_PROC=0, the ioctl-based
/proc, but provides structured /proc if _STRUCTURED_PROC == 1.
* procfs and the large-file environment didn't go well together:
** Until Solaris 11.3, <sys/procfs.h> would always #error in 32-bit
compilations when the large-file environment was active
(_FILE_OFFSET_BITS == 64).
** In both Solaris 11.4 and Illumos, this restriction was lifted for
structured /proc.
So one has to be careful always to define _STRUCTURED_PROC=1 when
testing for or using <sys/procfs.h> on Solaris. As the errors above
show, this isn't always the case in binutils-gdb right now.
Also one may need to disable large-file support for 32-bit compilations
on Solaris. config/largefile.m4 meant to do this by wrapping the
AC_SYS_LARGEFILE autoconf macro with appropriate checks, yielding
ACX_LARGEFILE. Unfortunately the macro doesn't always succeed because
it neglects the _STRUCTURED_PROC part.
To make things even worse, since GCC 9 g++ predefines
_FILE_OFFSET_BITS=64 on Solaris. So even if largefile.m4 deciced not to
enable large-file support, this has no effect, breaking the gdb build.
This patch addresses all this as follows:
* All tests for the <sys/procfs.h> header are made with
_STRUCTURED_PROC=1, the definition going into the various config.h
files instead of having to make them (and sometimes failing) in the
affected sources.
* To cope with the g++ predefine of _FILE_OFFSET_BITS=64,
-U_FILE_OFFSET_BITS is added to various *_CPPFLAGS variables. It had
been far easier to have just
#undef _FILE_OFFSET_BITS
in config.h, but unfortunately such a construct in config.in is
commented by config.status irrespective of indentation and whitespace
if large-file support is disabled. I found no way around this and
putting the #undef in several global headers for bfd, binutils, ld,
and gdb seemed way more invasive.
* Last, the applicability check in largefile.m4 was modified only to
disable largefile support if really needed. To do so, it checks if
<sys/procfs.h> compiles with _FILE_OFFSET_BITS=64 defined. If it
doesn't, the disabling only happens if gdb exists in-tree and isn't
disabled, otherwise (building binutils from a tarball), there's no
conflict.
What initially confused me was the check for $plugins here, which
originally caused the disabling not to take place. Since AC_PLUGINGS
does enable plugin support if <dlfcn.h> exists (which it does on
Solaris), the disabling never happened.
I could find no explanation why the linker plugin needs large-file
support but thought it would be enough if gld and GCC's lto-plugin
agreed on the _FILE_OFFSET_BITS value. Unfortunately, that's not
enough: lto-plugin uses the simple-object interface from libiberty,
which includes off_t arguments. So to fully disable large-file
support would mean also disabling it in libiberty and its users: gcc
and libstdc++-v3. This seems highly undesirable, so I decided to
disable the linker plugin instead if large-file support won't work.
The patch allows binutils+gdb to build on i386-pc-solaris2.11 (both
Solaris 11.3 and 11.4, using GCC 9.3.0 which is the worst case due to
predefined _FILE_OFFSET_BITS=64). Also regtested on
amd64-pc-solaris2.11 (again on Solaris 11.3 and 11.4),
x86_64-pc-linux-gnu and i686-pc-linux-gnu.
config:
* largefile.m4 (ACX_LARGEFILE) <sparc-*-solaris*|i?86-*-solaris*>:
Check for <sys/procfs.h> incompatilibity with large-file support
on Solaris.
Only disable large-file support and perhaps plugins if needed.
Set, substitute LARGEFILE_CPPFLAGS if so.
bfd:
* bfd.m4 (BFD_SYS_PROCFS_H): New macro.
(BFD_HAVE_SYS_PROCFS_TYPE): Require BFD_SYS_PROCFS_H.
Don't define _STRUCTURED_PROC.
(BFD_HAVE_SYS_PROCFS_TYPE_MEMBER): Likewise.
* elf.c [HAVE_SYS_PROCFS_H] (_STRUCTURED_PROC): Don't define.
* configure.ac: Use BFD_SYS_PROCFS_H to check for <sys/procfs.h>.
* configure, config.in: Regenerate.
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
binutils:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
* configure: Regenerate.
gas:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in, doc/Makefile.in: Regenerate.
* configure: Regenerate.
gdb:
* proc-api.c (_STRUCTURED_PROC): Don't define.
* proc-events.c: Likewise.
* proc-flags.c: Likewise.
* proc-why.c: Likewise.
* procfs.c: Likewise.
* Makefile.in (INTERNAL_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* configure, config.in: Regenerate.
gdbserver:
* configure, config.in: Regenerate.
gdbsupport:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* common.m4 (GDB_AC_COMMON): Use BFD_SYS_PROCFS_H to check for
<sys/procfs.h>.
* Makefile.in: Regenerate.
* configure, config.in: Regenerate.
gnulib:
* configure.ac: Run ACX_LARGEFILE before gl_EARLY.
* configure: Regenerate.
gprof:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in: Regenerate.
* configure: Regenerate.
ld:
* Makefile.am (AM_CPPFLAGS): Add LARGEFILE_CPPFLAGS.
* Makefile.in: Regenerate.
* configure: Regenerate.
542 lines
19 KiB
Makefile
542 lines
19 KiB
Makefile
## Process this file with automake to generate Makefile.in
|
|
#
|
|
# Copyright (C) 2012-2020 Free Software Foundation, Inc.
|
|
#
|
|
# This file is free software; you can redistribute it and/or modify
|
|
# it under the terms of the GNU General Public License as published by
|
|
# the Free Software Foundation; either version 3 of the License, or
|
|
# (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program; see the file COPYING3. If not see
|
|
# <http://www.gnu.org/licenses/>.
|
|
#
|
|
|
|
AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects
|
|
ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
|
|
|
|
SUBDIRS = doc po
|
|
|
|
tooldir = $(exec_prefix)/$(target_alias)
|
|
|
|
## These aren't set by automake, because they appear in
|
|
## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and
|
|
## thus is not seen by automake.
|
|
CC_FOR_BUILD = @CC_FOR_BUILD@
|
|
EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
|
|
|
|
YACC = `if [ -f ../bison/bison ]; then echo ../bison/bison -y -L$(srcdir)/../bison/; else echo @YACC@; fi`
|
|
YFLAGS = -d
|
|
LEX = `if [ -f ../flex/flex ]; then echo ../flex/flex; else echo @LEX@; fi`
|
|
LEXLIB = @LEXLIB@
|
|
|
|
# Automake 1.10+ disables lex and yacc output file regeneration if
|
|
# maintainer mode is disabled. Avoid this.
|
|
am__skiplex =
|
|
am__skipyacc =
|
|
|
|
# This is where we get zlib from. zlibdir is -L../zlib and zlibinc is
|
|
# -I../zlib, unless we were configured with --with-system-zlib, in which
|
|
# case both are empty.
|
|
ZLIB = @zlibdir@ -lz
|
|
ZLIBINC = @zlibinc@
|
|
|
|
WARN_CFLAGS = @WARN_CFLAGS@
|
|
WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@
|
|
NO_WERROR = @NO_WERROR@
|
|
AM_CFLAGS = $(WARN_CFLAGS) $(ZLIBINC)
|
|
AM_CFLAGS_FOR_BUILD = $(WARN_CFLAGS_FOR_BUILD) $(ZLIBINC)
|
|
LIBICONV = @LIBICONV@
|
|
|
|
DEBUGINFOD_LIBS = @DEBUGINFOD_LIBS@
|
|
|
|
# these two are almost the same program
|
|
AR_PROG=ar
|
|
RANLIB_PROG=ranlib
|
|
|
|
# objcopy and strip should be the same program
|
|
OBJCOPY_PROG=objcopy
|
|
STRIP_PROG=strip-new
|
|
|
|
STRINGS_PROG=strings
|
|
|
|
READELF_PROG=readelf
|
|
|
|
ELFEDIT_PROG=elfedit
|
|
|
|
# These should all be the same program too.
|
|
SIZE_PROG=size
|
|
NM_PROG=nm-new
|
|
OBJDUMP_PROG=objdump
|
|
|
|
# This is the demangler, as a standalone program.
|
|
# Note: This one is used as the installed name too, unlike the above.
|
|
DEMANGLER_PROG=cxxfilt
|
|
|
|
ADDR2LINE_PROG=addr2line
|
|
|
|
DLLTOOL_PROG=dlltool
|
|
WINDRES_PROG=windres
|
|
WINDMC_PROG=windmc
|
|
DLLWRAP_PROG=dllwrap
|
|
|
|
SRCONV_PROG=srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT)
|
|
|
|
bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(OBJCOPY_PROG) @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ @BUILD_WINDMC@ $(ADDR2LINE_PROG) $(READELF_PROG) $(ELFEDIT_PROG) @BUILD_DLLWRAP@
|
|
|
|
bin_SCRIPTS = @BUILD_INSTALL_MISC@
|
|
EXTRA_SCRIPTS = embedspu
|
|
|
|
## Test programs.
|
|
BFDTEST1_PROG = bfdtest1
|
|
BFDTEST2_PROG = bfdtest2
|
|
GENTESTDLLS_PROG = testsuite/gentestdlls
|
|
|
|
TEST_PROGS = $(BFDTEST1_PROG) $(BFDTEST2_PROG) $(GENTESTDLLS_PROG)
|
|
|
|
## We need a special rule to install the programs which are built with
|
|
## -new, and to rename cxxfilt to c++filt.
|
|
RENAMED_PROGS = $(NM_PROG) $(STRIP_PROG) $(DEMANGLER_PROG)
|
|
noinst_PROGRAMS = $(RENAMED_PROGS) $(TEST_PROGS) @BUILD_MISC@
|
|
|
|
EXTRA_PROGRAMS = srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(WINDMC_PROG) $(DLLWRAP_PROG)
|
|
|
|
# Stuff that goes in tooldir/ if appropriate.
|
|
TOOL_PROGS = nm-new strip-new ar ranlib dlltool objdump objcopy readelf
|
|
|
|
BASEDIR = $(srcdir)/..
|
|
BFDDIR = $(BASEDIR)/bfd
|
|
INCDIR = $(BASEDIR)/include
|
|
|
|
AM_CPPFLAGS = -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) \
|
|
@HDEFINES@ \
|
|
@INCINTL@ \
|
|
@LARGEFILE_CPPFLAGS@ \
|
|
-DLOCALEDIR="\"$(datadir)/locale\"" \
|
|
-Dbin_dummy_emulation=$(EMULATION_VECTOR)
|
|
|
|
HFILES = \
|
|
arsup.h binemul.h bucomm.h budbg.h \
|
|
coffgrok.h debug.h dlltool.h dwarf.h elfcomm.h \
|
|
objdump.h sysdep.h unwind-ia64.h windres.h winduni.h windint.h \
|
|
windmc.h
|
|
|
|
GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h rcparse.h mcparse.h
|
|
BUILT_SOURCES = $(GENERATED_HFILES)
|
|
|
|
CFILES = \
|
|
addr2line.c ar.c arsup.c bin2c.c binemul.c bucomm.c \
|
|
coffdump.c coffgrok.c cxxfilt.c \
|
|
dwarf.c debug.c dlltool.c dllwrap.c \
|
|
elfcomm.c emul_aix.c emul_vanilla.c filemode.c \
|
|
is-ranlib.c is-strip.c maybe-ranlib.c maybe-strip.c \
|
|
nm.c not-ranlib.c not-strip.c \
|
|
objcopy.c objdump.c prdbg.c \
|
|
od-elf32_avr.c od-macho.c od-xcoff.c \
|
|
rclex.c rdcoff.c rddbg.c readelf.c rename.c \
|
|
resbin.c rescoff.c resrc.c resres.c \
|
|
size.c srconv.c stabs.c strings.c sysdump.c \
|
|
syslex_wrap.c unwind-ia64.c elfedit.c version.c \
|
|
windres.c winduni.c wrstabs.c \
|
|
windmc.c mclex.c
|
|
|
|
GENERATED_CFILES = \
|
|
arparse.c arlex.c sysroff.c sysinfo.c syslex.c \
|
|
defparse.c deflex.c rcparse.c mcparse.c
|
|
|
|
DEBUG_SRCS = rddbg.c debug.c stabs.c rdcoff.c
|
|
WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c
|
|
|
|
# Extra object files for objdump
|
|
OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
|
|
|
|
# Code shared by all the binutils.
|
|
BULIBS = bucomm.c version.c filemode.c
|
|
|
|
# Code shared by the ELF related programs.
|
|
ELFLIBS = elfcomm.c
|
|
|
|
BFDLIB = ../bfd/libbfd.la
|
|
|
|
OPCODES = ../opcodes/libopcodes.la
|
|
|
|
if ENABLE_LIBCTF
|
|
LIBCTF = ../libctf/libctf.la
|
|
LIBCTF_NOBFD = ../libctf/libctf-nobfd.la
|
|
else
|
|
LIBCTF =
|
|
LIBCTF_NOBFD =
|
|
endif
|
|
|
|
LIBIBERTY = ../libiberty/libiberty.a
|
|
|
|
POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)
|
|
po/POTFILES.in: @MAINT@ Makefile
|
|
for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
|
|
&& mv tmp $(srcdir)/po/POTFILES.in
|
|
|
|
EXPECT = expect
|
|
RUNTEST = runtest
|
|
|
|
CC_FOR_TARGET = ` \
|
|
if [ -f $$r/../gcc/xgcc ] ; then \
|
|
if [ -f $$r/../newlib/Makefile ] ; then \
|
|
echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \
|
|
else \
|
|
echo $$r/../gcc/xgcc -B$$r/../gcc/; \
|
|
fi; \
|
|
else \
|
|
if [ "@host@" = "@target@" ] ; then \
|
|
echo $(CC); \
|
|
else \
|
|
echo gcc | sed '$(transform)'; \
|
|
fi; \
|
|
fi`
|
|
|
|
check-DEJAGNU: site.exp
|
|
srcdir=`cd $(srcdir) && pwd`; export srcdir; \
|
|
r=`pwd`; export r; \
|
|
LC_ALL=C; export LC_ALL; \
|
|
EXPECT=$(EXPECT); export EXPECT; \
|
|
runtest=$(RUNTEST); \
|
|
if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
|
|
CC="$(CC)" CC_FOR_BUILD="$(CC_FOR_BUILD)" \
|
|
CC_FOR_TARGET="$(CC_FOR_TARGET)" CFLAGS_FOR_TARGET="$(CFLAGS)" \
|
|
$$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \
|
|
$(RUNTESTFLAGS); \
|
|
else echo "WARNING: could not find \`runtest'" 1>&2; :;\
|
|
fi
|
|
|
|
development.exp: $(BFDDIR)/development.sh
|
|
$(EGREP) "[development|experimental]=" $(BFDDIR)/development.sh \
|
|
| $(AWK) -F= '{ print "set " $$1 " " $$2 }' > $@
|
|
|
|
installcheck-local:
|
|
/bin/sh $(srcdir)/sanity.sh $(bindir)
|
|
|
|
# There's no global DEPENDENCIES. So, we must explicitly list everything
|
|
# which depends on libintl, since we don't know whether LIBINTL_DEP will be
|
|
# non-empty until configure time. Ugh!
|
|
size_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
|
|
objdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB) $(OPCODES) $(LIBCTF) $(OBJDUMP_PRIVATE_OFILES)
|
|
nm_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
|
|
ar_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
|
|
strings_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
|
|
strip_new_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
|
|
ranlib_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
|
|
cxxfilt_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
|
|
objcopy_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
|
|
srconv_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
|
|
sysdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
|
|
coffdump_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
|
|
dlltool_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
|
|
windres_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
|
|
windmc_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
|
|
addr2line_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
|
|
readelf_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(LIBCTF_NOBFD)
|
|
elfedit_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY)
|
|
dllwrap_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY)
|
|
bfdtest1_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
|
|
bfdtest2_DEPENDENCIES = $(LIBINTL_DEP) $(LIBIBERTY) $(BFDLIB)
|
|
|
|
LDADD = $(BFDLIB) $(LIBIBERTY) $(LIBINTL)
|
|
|
|
size_SOURCES = size.c $(BULIBS)
|
|
|
|
objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
|
|
|
|
strings_SOURCES = strings.c $(BULIBS)
|
|
|
|
readelf_SOURCES = readelf.c version.c unwind-ia64.c dwarf.c $(ELFLIBS)
|
|
readelf_LDADD = $(LIBINTL) $(LIBCTF_NOBFD) $(LIBIBERTY) $(ZLIB) $(DEBUGINFOD_LIBS)
|
|
|
|
elfedit_SOURCES = elfedit.c version.c $(ELFLIBS)
|
|
elfedit_LDADD = $(LIBINTL) $(LIBIBERTY)
|
|
|
|
strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)
|
|
|
|
nm_new_SOURCES = nm.c $(BULIBS)
|
|
|
|
objdump_SOURCES = objdump.c dwarf.c prdbg.c $(DEBUG_SRCS) $(BULIBS) $(ELFLIBS)
|
|
EXTRA_objdump_SOURCES = od-xcoff.c
|
|
objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(LIBCTF) $(BFDLIB) $(LIBIBERTY) $(LIBINTL) $(DEBUGINFOD_LIBS)
|
|
|
|
objdump.@OBJEXT@:objdump.c
|
|
if am__fastdepCC
|
|
$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
|
|
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
|
|
else
|
|
if AMDEP
|
|
source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@
|
|
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
|
|
endif
|
|
$(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
|
|
endif
|
|
|
|
cxxfilt_SOURCES = cxxfilt.c $(BULIBS)
|
|
|
|
ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c binemul.c \
|
|
emul_$(EMULATION).c $(BULIBS)
|
|
EXTRA_ar_SOURCES = $(CFILES)
|
|
ar_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
|
|
|
|
ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c \
|
|
binemul.c emul_$(EMULATION).c $(BULIBS)
|
|
ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
|
|
|
|
addr2line_SOURCES = addr2line.c $(BULIBS)
|
|
|
|
# The following is commented out for the conversion to automake.
|
|
# This rule creates a single binary that switches between ar and ranlib
|
|
# by looking at argv[0]. Use this kludge to save some disk space.
|
|
# However, you have to install things by hand.
|
|
# (That is after 'make install', replace the installed ranlib by a link to ar.)
|
|
# Alternatively, you can install ranlib.sh as ranlib.
|
|
# ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o
|
|
# $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
|
|
# -rm -f $(RANLIB_PROG)
|
|
# -ln $(AR_PROG) $(RANLIB_PROG)
|
|
#
|
|
# objcopy and strip in one binary that uses argv[0] to decide its action.
|
|
#
|
|
#objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o
|
|
# $(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
|
|
# -rm -f $(STRIP_PROG)
|
|
# -ln $(OBJCOPY_PROG) $(STRIP_PROG)
|
|
|
|
sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
|
|
./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
|
|
./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
|
|
./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
|
|
|
|
sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
|
|
./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
|
|
|
|
sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
|
|
$(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
|
|
|
|
syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h
|
|
$(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
|
|
|
|
sysinfo.@OBJEXT@: sysinfo.c
|
|
if [ -r sysinfo.c ]; then \
|
|
$(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \
|
|
else \
|
|
$(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \
|
|
fi
|
|
|
|
bin2c$(EXEEXT_FOR_BUILD): bin2c.c
|
|
$(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
|
|
|
|
embedspu: embedspu.sh Makefile
|
|
awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
|
|
chmod a+x $@
|
|
|
|
# We need these for parallel make.
|
|
sysinfo.h: sysinfo.c
|
|
|
|
# Disable -Werror, if it has been enabled, since old versions of bison/
|
|
# yacc will produce working code which contain compile time warnings.
|
|
arparse.@OBJEXT@: arparse.c
|
|
if am__fastdepCC
|
|
$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
|
|
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
|
|
else
|
|
if AMDEP
|
|
source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
|
|
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
|
|
endif
|
|
$(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
|
|
endif
|
|
|
|
arlex.@OBJEXT@: arlex.c
|
|
if am__fastdepCC
|
|
$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
|
|
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
|
|
else
|
|
if AMDEP
|
|
source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@
|
|
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
|
|
endif
|
|
$(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
|
|
endif
|
|
|
|
sysroff.@OBJEXT@: sysroff.c
|
|
if am__fastdepCC
|
|
$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
|
|
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
|
|
else
|
|
if AMDEP
|
|
source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@
|
|
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
|
|
endif
|
|
$(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
|
|
endif
|
|
|
|
defparse.@OBJEXT@: defparse.c
|
|
if am__fastdepCC
|
|
$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
|
|
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
|
|
else
|
|
if AMDEP
|
|
source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
|
|
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
|
|
endif
|
|
$(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
|
|
endif
|
|
|
|
deflex.@OBJEXT@: deflex.c
|
|
if am__fastdepCC
|
|
$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
|
|
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
|
|
else
|
|
if AMDEP
|
|
source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@
|
|
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
|
|
endif
|
|
$(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
|
|
endif
|
|
|
|
rcparse.@OBJEXT@: rcparse.c
|
|
if am__fastdepCC
|
|
$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
|
|
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
|
|
else
|
|
if AMDEP
|
|
source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
|
|
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
|
|
endif
|
|
$(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
|
|
endif
|
|
|
|
mcparse.@OBJEXT@: mcparse.c
|
|
if am__fastdepCC
|
|
$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
|
|
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
|
|
else
|
|
if AMDEP
|
|
source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
|
|
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
|
|
endif
|
|
$(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
|
|
endif
|
|
|
|
rclex.@OBJEXT@: rclex.c
|
|
if am__fastdepCC
|
|
$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
|
|
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
|
|
else
|
|
if AMDEP
|
|
source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
|
|
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
|
|
endif
|
|
$(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
|
|
endif
|
|
|
|
mclex.@OBJEXT@: mclex.c
|
|
if am__fastdepCC
|
|
$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
|
|
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
|
|
else
|
|
if AMDEP
|
|
source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
|
|
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
|
|
endif
|
|
$(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
|
|
endif
|
|
|
|
srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)
|
|
srconv.@OBJEXT@: sysroff.c
|
|
|
|
dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS)
|
|
dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
|
|
|
|
dlltool.@OBJEXT@:
|
|
if am__fastdepCC
|
|
$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
|
|
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
|
|
else
|
|
if AMDEP
|
|
source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@
|
|
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
|
|
endif
|
|
$(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
|
|
endif
|
|
|
|
rescoff.@OBJEXT@:
|
|
if am__fastdepCC
|
|
$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
|
|
mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
|
|
else
|
|
if AMDEP
|
|
source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@
|
|
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
|
|
endif
|
|
$(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
|
|
endif
|
|
|
|
coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)
|
|
|
|
sysdump_SOURCES = sysdump.c $(BULIBS)
|
|
sysdump.@OBJEXT@: sysroff.c
|
|
|
|
windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.c \
|
|
winduni.c resres.c $(BULIBS)
|
|
windres_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV)
|
|
|
|
windmc_SOURCES = windmc.c mcparse.y mclex.c \
|
|
winduni.c $(BULIBS)
|
|
windmc_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL) $(LIBICONV)
|
|
|
|
dllwrap_SOURCES = dllwrap.c version.c
|
|
dllwrap_LDADD = $(LIBIBERTY) $(LIBINTL)
|
|
|
|
|
|
EXTRA_DIST = arparse.c arparse.h arlex.c sysinfo.c sysinfo.h \
|
|
syslex.c deflex.c defparse.h defparse.c rcparse.h rcparse.c \
|
|
mcparse.h mcparse.c embedspu.sh
|
|
|
|
diststuff: $(EXTRA_DIST) info
|
|
all: info
|
|
|
|
# development.sh is used to determine -Werror default.
|
|
CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/development.sh
|
|
|
|
EXTRA_DEJAGNU_SITE_CONFIG = development.exp
|
|
|
|
DISTCLEANFILES = sysroff.c sysroff.h site.exp development.exp \
|
|
site.bak embedspu
|
|
|
|
MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \
|
|
binutils.log binutils.sum abcdefgh*
|
|
mostlyclean-local:
|
|
-rm -rf tmpdir
|
|
|
|
.PHONY: install-exec-local
|
|
|
|
install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
|
|
@list='$(RENAMED_PROGS)'; for p in $$list; do \
|
|
if test -f $$p$(EXEEXT); then \
|
|
echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
|
|
$(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p$(EXEEXT) $(DESTDIR)$(bindir)/`echo $$p|sed -e 's/-new//' -e 's/cxxfilt/$(DEMANGLER_NAME)/'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
|
|
else :; fi; \
|
|
done
|
|
$(mkinstalldirs) $(DESTDIR)$(tooldir)/bin
|
|
for i in $(TOOL_PROGS); do \
|
|
if [ -f $$i$(EXEEXT) ]; then \
|
|
j=`echo $$i | sed -e 's/-new//'`; \
|
|
k=`echo $$j | sed '$(transform)'`; \
|
|
if [ "$(bindir)/$$k" != "$(tooldir)/bin/$$j" ]; then \
|
|
rm -f $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
|
|
ln $(DESTDIR)$(bindir)/$$k$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \
|
|
|| $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(DESTDIR)$(tooldir)/bin/$$j$(EXEEXT); \
|
|
fi; \
|
|
else true; \
|
|
fi; \
|
|
done
|