mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-27 04:52:05 +08:00
0ac85db529
There is a lot of support code for the test suppression mechanism. But
as far as I know, it is not useful. The gdb_suppress_tests proc is in
fact disabled with this comment that has been there since forever:
return; # fnf - disable pending review of results where
# testsuite ran better without this
I suggest to just remove everything related to test suppression, that
removes some unnecessary complexity from the support code and the tests.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (gdb_test_multiple): Remove things related to test
suppression.
(default_gdb_exit): Likewise.
(default_gdb_spawn): Likewise.
(send_gdb): Likewise.
(gdb_expect): Likewise.
(gdb_expect_list): Likewise.
(default_gdb_init): Likewise.
(gdb_suppress_entire_file): Remove.
(gdb_suppress_tests): Remove.
(gdb_stop_suppressing_tests): Remove.
(gdb_clear_suppressed): Remove.
* lib/mi-support.exp (mi_uncatched_gdb_exit): Remove things
related to test suppression.
(default_mi_gdb_start): Likewise.
(mi_gdb_reinitialize_dir): Likewise.
(mi_gdb_test): Likewise.
(mi_run_cmd_full): Likewise.
(mi_runto_helper): Likewise.
(mi_execute_to): Likewise.
* lib/prompt.exp (default_prompt_gdb_start): Likewise.
* gdb.base/bitfields.exp: Likewise.
* gdb.base/bitfields2.exp: Likewise.
* gdb.base/break.exp: Likewise.
* gdb.base/call-sc.exp: Likewise.
* gdb.base/callfuncs.exp: Likewise.
* gdb.base/dfp-test.exp: Likewise.
* gdb.base/endian.exp: Likewise.
* gdb.base/exprs.exp: Likewise.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/hbreak2.exp: Likewise.
* gdb.base/recurse.exp: Likewise.
* gdb.base/scope.exp: Likewise.
* gdb.base/sepdebug.exp: Likewise.
* gdb.base/structs.exp: Likewise.
* gdb.base/until.exp: Likewise.
* gdb.cp/misc.exp: Likewise.
Change-Id: Ie6d3025091691ba72010faa28b85ebd417b738f7
2725 lines
77 KiB
Plaintext
2725 lines
77 KiB
Plaintext
# Copyright 1999-2021 Free Software Foundation, Inc.
|
||
|
||
# This program is free software; you can redistribute it and/or modify
|
||
# it under the terms of the GNU General Public License as published by
|
||
# the Free Software Foundation; either version 3 of the License, or
|
||
# (at your option) any later version.
|
||
#
|
||
# This program is distributed in the hope that it will be useful,
|
||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
# GNU General Public License for more details.
|
||
#
|
||
# You should have received a copy of the GNU General Public License
|
||
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||
|
||
# This file was based on a file written by Fred Fish. (fnf@cygnus.com)
|
||
|
||
# Test setup routines that work with the MI interpreter.
|
||
|
||
load_lib gdb-utils.exp
|
||
|
||
# The variable mi_gdb_prompt is a regexp which matches the gdb mi prompt.
|
||
# Set it if it is not already set.
|
||
global mi_gdb_prompt
|
||
if ![info exists mi_gdb_prompt] then {
|
||
set mi_gdb_prompt "\[(\]gdb\[)\] \r\n"
|
||
}
|
||
|
||
global mi_inferior_tty_name
|
||
|
||
# Always points to GDB's main UI spawn ID, even when testing with MI
|
||
# running on a secondary UI.
|
||
global gdb_main_spawn_id
|
||
|
||
# Points to the spawn id of the MI channel. When testing with MI
|
||
# running as the primary/main UI, this is the same as
|
||
# gdb_main_spawn_id, but will be different when testing with MI
|
||
# running on a secondary UI.
|
||
global mi_spawn_id
|
||
|
||
set MIFLAGS "-i=mi"
|
||
|
||
set thread_selected_re "=thread-selected,id=\"\[0-9\]+\"\r\n"
|
||
set gdbindex_warning_re "&\"warning: Skipping \[^\r\n\]+ \.gdb_index section in \[^\r\n\]+\"\r\n(?:&\"\\\\n\"\r\n)?"
|
||
set library_loaded_re "=library-loaded\[^\n\]+\"\r\n(?:$gdbindex_warning_re)?"
|
||
set breakpoint_re "=(?:breakpoint-created|breakpoint-deleted)\[^\n\]+\"\r\n"
|
||
|
||
#
|
||
# mi_gdb_exit -- exit the GDB, killing the target program if necessary
|
||
#
|
||
proc mi_gdb_exit {} {
|
||
catch mi_uncatched_gdb_exit
|
||
}
|
||
|
||
proc mi_uncatched_gdb_exit {} {
|
||
global GDB
|
||
global INTERNAL_GDBFLAGS GDBFLAGS
|
||
global gdb_spawn_id gdb_main_spawn_id
|
||
global mi_spawn_id inferior_spawn_id
|
||
global gdb_prompt
|
||
global mi_gdb_prompt
|
||
global MIFLAGS
|
||
|
||
if { [info procs sid_exit] != "" } {
|
||
sid_exit
|
||
}
|
||
|
||
if ![info exists gdb_spawn_id] {
|
||
return
|
||
}
|
||
|
||
verbose "Quitting $GDB $INTERNAL_GDBFLAGS $GDBFLAGS $MIFLAGS"
|
||
|
||
if { [is_remote host] && [board_info host exists fileid] } {
|
||
send_gdb "999-gdb-exit\n"
|
||
gdb_expect 10 {
|
||
-re "y or n" {
|
||
send_gdb "y\n"
|
||
exp_continue
|
||
}
|
||
-re "Undefined command.*$gdb_prompt $" {
|
||
send_gdb "quit\n"
|
||
exp_continue
|
||
}
|
||
-re "DOSEXIT code" { }
|
||
default { }
|
||
}
|
||
}
|
||
|
||
# Switch back to the main spawn id, so that remote_close below
|
||
# closes it, and not a secondary channel. Closing a secondary
|
||
# channel does not make GDB exit.
|
||
if {$gdb_spawn_id != $gdb_main_spawn_id} {
|
||
switch_gdb_spawn_id $gdb_main_spawn_id
|
||
}
|
||
|
||
# Close secondary MI channel, if there's one.
|
||
if {$mi_spawn_id != $gdb_main_spawn_id} {
|
||
close -i $mi_spawn_id
|
||
}
|
||
|
||
if ![is_remote host] {
|
||
remote_close host
|
||
}
|
||
unset gdb_spawn_id
|
||
unset gdb_main_spawn_id
|
||
unset mi_spawn_id
|
||
unset inferior_spawn_id
|
||
}
|
||
|
||
# Create the PTY for the inferior process and tell GDB about it.
|
||
|
||
proc mi_create_inferior_pty {} {
|
||
global mi_gdb_prompt
|
||
global inferior_spawn_id
|
||
global mi_inferior_tty_name
|
||
|
||
spawn -pty
|
||
set inferior_spawn_id $spawn_id
|
||
set tty_name $spawn_out(slave,name)
|
||
set mi_inferior_tty_name $tty_name
|
||
|
||
send_gdb "102-inferior-tty-set $tty_name\n"
|
||
gdb_expect 10 {
|
||
-re ".*102\\\^done\r\n$mi_gdb_prompt$" {
|
||
verbose "redirect inferior output to new terminal device."
|
||
}
|
||
timeout {
|
||
warning "Couldn't redirect inferior output." 2
|
||
}
|
||
}
|
||
}
|
||
|
||
proc mi_gdb_start_separate_mi_tty { args } {
|
||
global gdb_prompt mi_gdb_prompt
|
||
global timeout
|
||
global gdb_spawn_id gdb_main_spawn_id mi_spawn_id
|
||
global inferior_spawn_id
|
||
|
||
set separate_inferior_pty 0
|
||
|
||
foreach arg $args {
|
||
if {$arg == "separate-inferior-tty"} {
|
||
set separate_inferior_pty 1
|
||
}
|
||
}
|
||
|
||
gdb_start
|
||
|
||
# Create the new PTY for the MI UI.
|
||
spawn -pty
|
||
set mi_spawn_id $spawn_id
|
||
set mi_tty_name $spawn_out(slave,name)
|
||
gdb_test_multiple "new-ui mi $mi_tty_name" "new-ui" {
|
||
-re "New UI allocated\r\n$gdb_prompt $" {
|
||
}
|
||
}
|
||
|
||
# Switch to the MI channel.
|
||
set gdb_main_spawn_id $gdb_spawn_id
|
||
switch_gdb_spawn_id $mi_spawn_id
|
||
|
||
# Consume pending output and MI prompt.
|
||
gdb_expect {
|
||
-re "$mi_gdb_prompt$" {
|
||
}
|
||
default {
|
||
perror "MI channel failed"
|
||
remote_close host
|
||
return -1
|
||
}
|
||
}
|
||
|
||
if {$separate_inferior_pty} {
|
||
mi_create_inferior_pty
|
||
}
|
||
|
||
mi_detect_async
|
||
|
||
return 0
|
||
}
|
||
|
||
#
|
||
# default_mi_gdb_start [FLAGS] -- start gdb running, default procedure
|
||
#
|
||
# If "separate-inferior-tty" is specified, the inferior works with
|
||
# it's own PTY.
|
||
#
|
||
# If "separate-mi-tty" is specified, the gdb starts in CLI mode, with
|
||
# MI running on a secondary UI, on its own tty.
|
||
#
|
||
# When running over NFS, particularly if running many simultaneous
|
||
# tests on different hosts all using the same server, things can
|
||
# get really slow. Give gdb at least 3 minutes to start up.
|
||
#
|
||
proc default_mi_gdb_start { args } {
|
||
global use_gdb_stub
|
||
global GDB
|
||
global INTERNAL_GDBFLAGS GDBFLAGS
|
||
global gdb_prompt
|
||
global mi_gdb_prompt
|
||
global timeout
|
||
global gdb_spawn_id gdb_main_spawn_id inferior_spawn_id mi_spawn_id
|
||
global MIFLAGS
|
||
global FORCE_SEPARATE_MI_TTY
|
||
|
||
# Keep track of the number of times GDB has been launched.
|
||
global gdb_instances
|
||
incr gdb_instances
|
||
|
||
gdb_stdin_log_init
|
||
|
||
if {[info exists FORCE_SEPARATE_MI_TTY]} {
|
||
set separate_mi_pty $FORCE_SEPARATE_MI_TTY
|
||
} else {
|
||
set separate_mi_pty 0
|
||
}
|
||
|
||
set separate_inferior_pty 0
|
||
|
||
foreach arg $args {
|
||
if {$arg == "separate-mi-tty"} {
|
||
set separate_mi_pty 1
|
||
} elseif {$arg == "separate-inferior-tty"} {
|
||
set separate_inferior_pty 1
|
||
}
|
||
}
|
||
|
||
if {$separate_mi_pty} {
|
||
return [eval mi_gdb_start_separate_mi_tty $args]
|
||
}
|
||
|
||
set inferior_pty no-tty
|
||
|
||
# Set the default value, it may be overriden later by specific testfile.
|
||
set use_gdb_stub [target_info exists use_gdb_stub]
|
||
|
||
# Start SID.
|
||
if { [info procs sid_start] != "" } {
|
||
verbose "Spawning SID"
|
||
sid_start
|
||
}
|
||
|
||
if [info exists gdb_spawn_id] {
|
||
return 0
|
||
}
|
||
|
||
save_vars { GDBFLAGS } {
|
||
append GDBFLAGS " $MIFLAGS"
|
||
|
||
set res [gdb_spawn]
|
||
if { $res != 0} {
|
||
return $res
|
||
}
|
||
}
|
||
|
||
gdb_expect {
|
||
-re "~\"GNU.*\r\n~\".*$mi_gdb_prompt$" {
|
||
# We have a new format mi startup prompt. If we are
|
||
# running mi1, then this is an error as we should be
|
||
# using the old-style prompt.
|
||
if { $MIFLAGS == "-i=mi1" } {
|
||
perror "(mi startup) Got unexpected new mi prompt."
|
||
remote_close host
|
||
unset gdb_spawn_id
|
||
return -1
|
||
}
|
||
verbose "GDB initialized."
|
||
}
|
||
-re "\[^~\].*$mi_gdb_prompt$" {
|
||
# We have an old format mi startup prompt. If we are
|
||
# not running mi1, then this is an error as we should be
|
||
# using the new-style prompt.
|
||
if { $MIFLAGS != "-i=mi1" } {
|
||
perror "(mi startup) Got unexpected old mi prompt."
|
||
remote_close host
|
||
unset gdb_spawn_id
|
||
return -1
|
||
}
|
||
verbose "GDB initialized."
|
||
}
|
||
-re ".*unrecognized option.*for a complete list of options." {
|
||
untested "skip mi tests (not compiled with mi support)."
|
||
remote_close host
|
||
unset gdb_spawn_id
|
||
return -1
|
||
}
|
||
-re ".*Interpreter `mi' unrecognized." {
|
||
untested "skip mi tests (not compiled with mi support)."
|
||
remote_close host
|
||
unset gdb_spawn_id
|
||
return -1
|
||
}
|
||
timeout {
|
||
perror "(timeout) GDB never initialized after 10 seconds."
|
||
remote_close host
|
||
unset gdb_spawn_id
|
||
return -1
|
||
}
|
||
}
|
||
set gdb_main_spawn_id $gdb_spawn_id
|
||
set mi_spawn_id $gdb_spawn_id
|
||
|
||
# FIXME: mi output does not go through pagers, so these can be removed.
|
||
# force the height to "unlimited", so no pagers get used
|
||
send_gdb "100-gdb-set height 0\n"
|
||
gdb_expect 10 {
|
||
-re ".*100-gdb-set height 0\r\n100\\\^done\r\n$mi_gdb_prompt$" {
|
||
verbose "Setting height to 0." 2
|
||
}
|
||
timeout {
|
||
warning "Couldn't set the height to 0"
|
||
}
|
||
}
|
||
# force the width to "unlimited", so no wraparound occurs
|
||
send_gdb "101-gdb-set width 0\n"
|
||
gdb_expect 10 {
|
||
-re ".*101-gdb-set width 0\r\n101\\\^done\r\n$mi_gdb_prompt$" {
|
||
verbose "Setting width to 0." 2
|
||
}
|
||
timeout {
|
||
warning "Couldn't set the width to 0."
|
||
}
|
||
}
|
||
|
||
if { $separate_inferior_pty } {
|
||
mi_create_inferior_pty
|
||
}
|
||
|
||
if {![info exists inferior_spawn_id]} {
|
||
set inferior_spawn_id $gdb_spawn_id
|
||
}
|
||
|
||
mi_detect_async
|
||
|
||
return 0
|
||
}
|
||
|
||
#
|
||
# Overridable function. You can override this function in your
|
||
# baseboard file.
|
||
#
|
||
proc mi_gdb_start { args } {
|
||
return [eval default_mi_gdb_start $args]
|
||
}
|
||
|
||
# Many of the tests depend on setting breakpoints at various places and
|
||
# running until that breakpoint is reached. At times, we want to start
|
||
# with a clean-slate with respect to breakpoints, so this utility proc
|
||
# lets us do this without duplicating this code everywhere.
|
||
#
|
||
|
||
proc mi_delete_breakpoints {} {
|
||
global mi_gdb_prompt
|
||
|
||
# FIXME: The mi operation won't accept a prompt back and will use the 'all' arg
|
||
send_gdb "102-break-delete\n"
|
||
gdb_expect 30 {
|
||
-re "Delete all breakpoints.*y or n.*$" {
|
||
send_gdb "y\n"
|
||
exp_continue
|
||
}
|
||
-re "102-break-delete\r\n102\\\^done\r\n$mi_gdb_prompt$" {
|
||
# This happens if there were no breakpoints
|
||
}
|
||
timeout { perror "Delete all breakpoints in mi_delete_breakpoints (timeout)" ; return }
|
||
}
|
||
|
||
# The correct output is not "No breakpoints or watchpoints." but an
|
||
# empty BreakpointTable. Also, a query is not acceptable with mi.
|
||
send_gdb "103-break-list\n"
|
||
gdb_expect 30 {
|
||
-re "103-break-list\r\n103\\\^done,BreakpointTable=\{\}\r\n$mi_gdb_prompt$" {}
|
||
-re "103-break-list\r\n103\\\^done,BreakpointTable=\{nr_rows=\".\",nr_cols=\".\",hdr=\\\[\{width=\".*\",alignment=\".*\",col_name=\"number\",colhdr=\"Num\"\}.*colhdr=\"Type\".*colhdr=\"Disp\".*colhdr=\"Enb\".*colhdr=\"Address\".*colhdr=\"What\".*\\\],body=\\\[\\\]\}\r\n$mi_gdb_prompt$" {}
|
||
-re "103-break-list\r\n103\\\^doneNo breakpoints or watchpoints.\r\n\r\n$mi_gdb_prompt$" {warning "Unexpected console text received"}
|
||
-re "$mi_gdb_prompt$" { perror "Breakpoints not deleted" ; return }
|
||
-re "Delete all breakpoints.*or n.*$" {
|
||
warning "Unexpected prompt for breakpoints deletion"
|
||
send_gdb "y\n"
|
||
exp_continue
|
||
}
|
||
timeout { perror "-break-list (timeout)" ; return }
|
||
}
|
||
}
|
||
|
||
proc mi_gdb_reinitialize_dir { subdir } {
|
||
global mi_gdb_prompt
|
||
global MIFLAGS
|
||
|
||
if [is_remote host] {
|
||
return ""
|
||
}
|
||
|
||
if { $MIFLAGS == "-i=mi1" } {
|
||
send_gdb "104-environment-directory\n"
|
||
gdb_expect 60 {
|
||
-re ".*Reinitialize source path to empty.*y or n. " {
|
||
warning "Got confirmation prompt for dir reinitialization."
|
||
send_gdb "y\n"
|
||
gdb_expect 60 {
|
||
-re "$mi_gdb_prompt$" {}
|
||
timeout {error "Dir reinitialization failed (timeout)"}
|
||
}
|
||
}
|
||
-re "$mi_gdb_prompt$" {}
|
||
timeout {error "Dir reinitialization failed (timeout)"}
|
||
}
|
||
} else {
|
||
send_gdb "104-environment-directory -r\n"
|
||
gdb_expect 60 {
|
||
-re "104\\\^done,source-path=.*\r\n$mi_gdb_prompt$" {}
|
||
-re "$mi_gdb_prompt$" {}
|
||
timeout {error "Dir reinitialization failed (timeout)"}
|
||
}
|
||
}
|
||
|
||
send_gdb "105-environment-directory $subdir\n"
|
||
gdb_expect 60 {
|
||
-re "Source directories searched.*$mi_gdb_prompt$" {
|
||
verbose "Dir set to $subdir"
|
||
}
|
||
-re "105\\\^done.*\r\n$mi_gdb_prompt$" {
|
||
# FIXME: We return just the prompt for now.
|
||
verbose "Dir set to $subdir"
|
||
# perror "Dir \"$subdir\" failed."
|
||
}
|
||
}
|
||
}
|
||
|
||
# Send GDB the "target" command.
|
||
# FIXME: Some of these patterns are not appropriate for MI. Based on
|
||
# config/monitor.exp:gdb_target_command.
|
||
proc mi_gdb_target_cmd { targetname serialport } {
|
||
global mi_gdb_prompt
|
||
|
||
set serialport_re [string_to_regexp $serialport]
|
||
for {set i 1} {$i <= 3} {incr i} {
|
||
send_gdb "47-target-select $targetname $serialport\n"
|
||
gdb_expect 60 {
|
||
-re "47\\^connected.*$mi_gdb_prompt" {
|
||
verbose "Set target to $targetname"
|
||
return 0
|
||
}
|
||
-re "unknown host.*$mi_gdb_prompt" {
|
||
verbose "Couldn't look up $serialport"
|
||
}
|
||
-re "Couldn't establish connection to remote.*$mi_gdb_prompt$" {
|
||
verbose "Connection failed"
|
||
}
|
||
-re "Remote MIPS debugging.*$mi_gdb_prompt$" {
|
||
verbose "Set target to $targetname"
|
||
return 0
|
||
}
|
||
-re "Remote debugging using .*$serialport_re.*$mi_gdb_prompt$" {
|
||
verbose "Set target to $targetname"
|
||
return 0
|
||
}
|
||
-re "Remote target $targetname connected to.*$mi_gdb_prompt$" {
|
||
verbose "Set target to $targetname"
|
||
return 0
|
||
}
|
||
-re "Connected to.*$mi_gdb_prompt$" {
|
||
verbose "Set target to $targetname"
|
||
return 0
|
||
}
|
||
-re "Ending remote.*$mi_gdb_prompt$" { }
|
||
-re "Connection refused.*$mi_gdb_prompt$" {
|
||
verbose "Connection refused by remote target. Pausing, and trying again."
|
||
sleep 5
|
||
continue
|
||
}
|
||
-re "Non-stop mode requested, but remote does not support non-stop.*$mi_gdb_prompt" {
|
||
unsupported "non-stop mode not supported"
|
||
return 1
|
||
}
|
||
-re "Timeout reading from remote system.*$mi_gdb_prompt$" {
|
||
verbose "Got timeout error from gdb."
|
||
}
|
||
timeout {
|
||
send_gdb ""
|
||
break
|
||
}
|
||
}
|
||
}
|
||
return 1
|
||
}
|
||
|
||
#
|
||
# load a file into the debugger (file command only).
|
||
# return a -1 if anything goes wrong.
|
||
#
|
||
proc mi_gdb_file_cmd { arg } {
|
||
global loadpath
|
||
global loadfile
|
||
global GDB
|
||
global mi_gdb_prompt
|
||
global last_loaded_file
|
||
upvar timeout timeout
|
||
|
||
# GCC for Windows target may create foo.exe given "-o foo".
|
||
if { ![file exists $arg] && [file exists "$arg.exe"] } {
|
||
set arg "$arg.exe"
|
||
}
|
||
|
||
set last_loaded_file $arg
|
||
|
||
if [is_remote host] {
|
||
set arg [remote_download host $arg]
|
||
if { $arg == "" } {
|
||
error "download failed"
|
||
return -1
|
||
}
|
||
}
|
||
|
||
# FIXME: Several of these patterns are only acceptable for console
|
||
# output. Queries are an error for mi.
|
||
send_gdb "105-file-exec-and-symbols $arg\n"
|
||
gdb_expect 120 {
|
||
-re "Reading symbols from.*$mi_gdb_prompt$" {
|
||
verbose "\t\tLoaded $arg into the $GDB"
|
||
return 0
|
||
}
|
||
-re "has no symbol-table.*$mi_gdb_prompt$" {
|
||
perror "$arg wasn't compiled with \"-g\""
|
||
return -1
|
||
}
|
||
-re "Load new symbol table from \".*\".*y or n. $" {
|
||
send_gdb "y\n"
|
||
gdb_expect 120 {
|
||
-re "Reading symbols from.*$mi_gdb_prompt$" {
|
||
verbose "\t\tLoaded $arg with new symbol table into $GDB"
|
||
# All OK
|
||
}
|
||
timeout {
|
||
perror "(timeout) Couldn't load $arg, other program already loaded."
|
||
return -1
|
||
}
|
||
}
|
||
}
|
||
-re "No such file or directory.*$mi_gdb_prompt$" {
|
||
perror "($arg) No such file or directory\n"
|
||
return -1
|
||
}
|
||
-re "105-file-exec-and-symbols .*\r\n105\\\^done\r\n$mi_gdb_prompt$" {
|
||
# We (MI) are just giving the prompt back for now, instead of giving
|
||
# some acknowledgement.
|
||
return 0
|
||
}
|
||
timeout {
|
||
perror "couldn't load $arg into $GDB (timed out)."
|
||
return -1
|
||
}
|
||
eof {
|
||
# This is an attempt to detect a core dump, but seems not to
|
||
# work. Perhaps we need to match .* followed by eof, in which
|
||
# gdb_expect does not seem to have a way to do that.
|
||
perror "couldn't load $arg into $GDB (end of file)."
|
||
return -1
|
||
}
|
||
}
|
||
}
|
||
|
||
#
|
||
# connect to the target and download a file, if necessary.
|
||
# return a -1 if anything goes wrong.
|
||
#
|
||
proc mi_gdb_target_load { } {
|
||
global loadpath
|
||
global loadfile
|
||
global GDB
|
||
global mi_gdb_prompt
|
||
|
||
if [target_info exists gdb_load_timeout] {
|
||
set loadtimeout [target_info gdb_load_timeout]
|
||
} else {
|
||
set loadtimeout 1600
|
||
}
|
||
|
||
if { [info procs gdbserver_gdb_load] != "" } {
|
||
mi_gdb_test "kill" ".*" ""
|
||
if { [catch gdbserver_gdb_load res] == 1 } {
|
||
perror $res
|
||
return -1
|
||
}
|
||
set protocol [lindex $res 0]
|
||
set gdbport [lindex $res 1]
|
||
|
||
if { [mi_gdb_target_cmd $protocol $gdbport] != 0 } {
|
||
return -1
|
||
}
|
||
} elseif { [info procs send_target_sid] != "" } {
|
||
# For SID, things get complex
|
||
send_gdb "kill\n"
|
||
gdb_expect 10 {
|
||
-re ".*$mi_gdb_prompt$"
|
||
}
|
||
send_target_sid
|
||
gdb_expect $loadtimeout {
|
||
-re "\\^done.*$mi_gdb_prompt$" {
|
||
}
|
||
timeout {
|
||
perror "Unable to connect to SID target (timeout)"
|
||
return -1
|
||
}
|
||
}
|
||
send_gdb "48-target-download\n"
|
||
gdb_expect $loadtimeout {
|
||
-re "48\\^done.*$mi_gdb_prompt$" {
|
||
}
|
||
timeout {
|
||
perror "Unable to download to SID target (timeout)"
|
||
return -1
|
||
}
|
||
}
|
||
} elseif { [target_info protocol] == "sim" } {
|
||
set target_sim_options "[board_info target gdb,target_sim_options]"
|
||
# For the simulator, just connect to it directly.
|
||
send_gdb "47-target-select sim $target_sim_options\n"
|
||
gdb_expect $loadtimeout {
|
||
-re "47\\^connected.*$mi_gdb_prompt$" {
|
||
}
|
||
timeout {
|
||
perror "Unable to select sim target (timeout)"
|
||
return -1
|
||
}
|
||
}
|
||
send_gdb "48-target-download\n"
|
||
gdb_expect $loadtimeout {
|
||
-re "48\\^done.*$mi_gdb_prompt$" {
|
||
}
|
||
timeout {
|
||
perror "Unable to download to sim target (timeout)"
|
||
return -1
|
||
}
|
||
}
|
||
} elseif { [target_info gdb_protocol] == "remote" } {
|
||
# remote targets
|
||
if { [mi_gdb_target_cmd "remote" [target_info netport]] != 0 } {
|
||
perror "Unable to connect to remote target"
|
||
return -1
|
||
}
|
||
send_gdb "48-target-download\n"
|
||
gdb_expect $loadtimeout {
|
||
-re "48\\^done.*$mi_gdb_prompt$" {
|
||
}
|
||
timeout {
|
||
perror "Unable to download to remote target (timeout)"
|
||
return -1
|
||
}
|
||
}
|
||
}
|
||
return 0
|
||
}
|
||
|
||
#
|
||
# load a file into the debugger.
|
||
# return a -1 if anything goes wrong.
|
||
#
|
||
proc mi_gdb_load { arg } {
|
||
if { $arg != "" } {
|
||
return [mi_gdb_file_cmd $arg]
|
||
}
|
||
return 0
|
||
}
|
||
|
||
# mi_gdb_test COMMAND PATTERN MESSAGE [IPATTERN] -- send a command to gdb;
|
||
# test the result.
|
||
#
|
||
# COMMAND is the command to execute, send to GDB with send_gdb. If
|
||
# this is the null string no command is sent.
|
||
# PATTERN is the pattern to match for a PASS, and must NOT include
|
||
# the \r\n sequence immediately before the gdb prompt.
|
||
# MESSAGE is the message to be printed. (If this is the empty string,
|
||
# then sometimes we don't call pass or fail at all; I don't
|
||
# understand this at all.)
|
||
# IPATTERN is the pattern to match for the inferior's output. This parameter
|
||
# is optional. If present, it will produce a PASS if the match is
|
||
# successful, and a FAIL if unsuccessful.
|
||
#
|
||
# Returns:
|
||
# 1 if the test failed,
|
||
# 0 if the test passes,
|
||
# -1 if there was an internal error.
|
||
#
|
||
proc mi_gdb_test { args } {
|
||
global verbose
|
||
global mi_gdb_prompt
|
||
global GDB expect_out
|
||
global inferior_exited_re async
|
||
upvar timeout timeout
|
||
|
||
set command [lindex $args 0]
|
||
set pattern [lindex $args 1]
|
||
set message [lindex $args 2]
|
||
|
||
if [llength $args]==4 {
|
||
set ipattern [lindex $args 3]
|
||
}
|
||
|
||
if [llength $args]==5 {
|
||
set question_string [lindex $args 3]
|
||
set response_string [lindex $args 4]
|
||
} else {
|
||
set question_string "^FOOBAR$"
|
||
}
|
||
|
||
if $verbose>2 then {
|
||
send_user "Sending \"$command\" to gdb\n"
|
||
send_user "Looking to match \"$pattern\"\n"
|
||
send_user "Message is \"$message\"\n"
|
||
}
|
||
|
||
set result -1
|
||
set string "${command}\n"
|
||
set string_regex [string_to_regexp $command]
|
||
|
||
if { $command != "" } {
|
||
while { "$string" != "" } {
|
||
set foo [string first "\n" "$string"]
|
||
set len [string length "$string"]
|
||
if { $foo < [expr $len - 1] } {
|
||
set str [string range "$string" 0 $foo]
|
||
if { [send_gdb "$str"] != "" } {
|
||
perror "Couldn't send $command to GDB."
|
||
}
|
||
gdb_expect 2 {
|
||
-re "\[\r\n\]" { }
|
||
timeout { }
|
||
}
|
||
set string [string range "$string" [expr $foo + 1] end]
|
||
} else {
|
||
break
|
||
}
|
||
}
|
||
if { "$string" != "" } {
|
||
if { [send_gdb "$string"] != "" } {
|
||
perror "Couldn't send $command to GDB."
|
||
}
|
||
}
|
||
}
|
||
|
||
if [info exists timeout] {
|
||
set tmt $timeout
|
||
} else {
|
||
global timeout
|
||
if [info exists timeout] {
|
||
set tmt $timeout
|
||
} else {
|
||
set tmt 60
|
||
}
|
||
}
|
||
if {$async} {
|
||
# With $prompt_re "" there may come arbitrary asynchronous response
|
||
# from the previous command, before or after $string_regex.
|
||
set string_regex ".*"
|
||
}
|
||
verbose -log "Expecting: ^($string_regex\[\r\n\]+)?($pattern\[\r\n\]+$mi_gdb_prompt\[ \]*)"
|
||
gdb_expect $tmt {
|
||
-re "\\*\\*\\* DOSEXIT code.*" {
|
||
if { $message != "" } {
|
||
fail "$message"
|
||
}
|
||
return -1
|
||
}
|
||
-re "Ending remote debugging.*$mi_gdb_prompt\[ \]*$" {
|
||
if ![isnative] then {
|
||
warning "Can`t communicate to remote target."
|
||
}
|
||
gdb_exit
|
||
gdb_start
|
||
set result -1
|
||
}
|
||
-re "^($string_regex\[\r\n\]+)?($pattern\[\r\n\]+$mi_gdb_prompt\[ \]*)" {
|
||
# At this point, $expect_out(1,string) is the MI input command.
|
||
# and $expect_out(2,string) is the MI output command.
|
||
# If $expect_out(1,string) is "", then there was no MI input command here.
|
||
|
||
# NOTE, there is no trailing anchor because with GDB/MI,
|
||
# asynchronous responses can happen at any point, causing more
|
||
# data to be available. Normally an anchor is used to make
|
||
# sure the end of the output is matched, however, $mi_gdb_prompt
|
||
# is just as good of an anchor since mi_gdb_test is meant to
|
||
# match a single mi output command. If a second GDB/MI output
|
||
# response is sent, it will be in the buffer for the next
|
||
# time mi_gdb_test is called.
|
||
if ![string match "" $message] then {
|
||
pass "$message"
|
||
}
|
||
set result 0
|
||
}
|
||
-re "(${question_string})$" {
|
||
send_gdb "$response_string\n"
|
||
exp_continue
|
||
}
|
||
-re "Undefined.* command:.*$mi_gdb_prompt\[ \]*$" {
|
||
perror "Undefined command \"$command\"."
|
||
fail "$message"
|
||
set result 1
|
||
}
|
||
-re "Ambiguous command.*$mi_gdb_prompt\[ \]*$" {
|
||
perror "\"$command\" is not a unique command name."
|
||
fail "$message"
|
||
set result 1
|
||
}
|
||
-re "$inferior_exited_re with code \[0-9\]+.*$mi_gdb_prompt\[ \]*$" {
|
||
if ![string match "" $message] then {
|
||
set errmsg "$message (the program exited)"
|
||
} else {
|
||
set errmsg "$command (the program exited)"
|
||
}
|
||
fail "$errmsg"
|
||
return -1
|
||
}
|
||
-re "The program is not being run.*$mi_gdb_prompt\[ \]*$" {
|
||
if ![string match "" $message] then {
|
||
set errmsg "$message (the program is no longer running)"
|
||
} else {
|
||
set errmsg "$command (the program is no longer running)"
|
||
}
|
||
fail "$errmsg"
|
||
return -1
|
||
}
|
||
-re ".*$mi_gdb_prompt\[ \]*$" {
|
||
if ![string match "" $message] then {
|
||
fail "$message (unexpected output)"
|
||
}
|
||
set result 1
|
||
}
|
||
"<return>" {
|
||
send_gdb "\n"
|
||
perror "Window too small."
|
||
fail "$message"
|
||
}
|
||
eof {
|
||
perror "Process no longer exists"
|
||
if { $message != "" } {
|
||
fail "$message"
|
||
}
|
||
return -1
|
||
}
|
||
full_buffer {
|
||
perror "internal buffer is full."
|
||
fail "$message"
|
||
}
|
||
timeout {
|
||
if ![string match "" $message] then {
|
||
fail "$message (timeout)"
|
||
}
|
||
set result 1
|
||
}
|
||
}
|
||
|
||
# If the GDB output matched, compare the inferior output.
|
||
if { $result == 0 } {
|
||
if [ info exists ipattern ] {
|
||
if { ![target_info exists gdb,noinferiorio] } {
|
||
global gdb_spawn_id inferior_spawn_id
|
||
|
||
set sid "$inferior_spawn_id $gdb_spawn_id"
|
||
gdb_expect {
|
||
-i "$sid" -re "$ipattern" {
|
||
pass "$message inferior output"
|
||
}
|
||
timeout {
|
||
fail "$message inferior output (timeout)"
|
||
set result 1
|
||
}
|
||
}
|
||
} else {
|
||
unsupported "$message inferior output"
|
||
}
|
||
}
|
||
}
|
||
|
||
return $result
|
||
}
|
||
|
||
# Collect output sent to the console output stream until UNTIL is
|
||
# seen. UNTIL is a regular expression. MESSAGE is the message to be
|
||
# printed in case of timeout.
|
||
|
||
proc mi_gdb_expect_cli_output {until message} {
|
||
|
||
set output ""
|
||
gdb_expect {
|
||
-re "~\"(\[^\r\n\]+)\"\r\n" {
|
||
append output $expect_out(1,string)
|
||
exp_continue
|
||
}
|
||
-notransfer -re "$until" {
|
||
# Done
|
||
}
|
||
timeout {
|
||
fail "$message (timeout)"
|
||
return ""
|
||
}
|
||
}
|
||
|
||
return $output
|
||
}
|
||
|
||
#
|
||
# MI run command. (A modified version of gdb_run_cmd)
|
||
#
|
||
|
||
# In patterns, the newline sequence ``\r\n'' is matched explicitly as
|
||
# ``.*$'' could swallow up output that we attempt to match elsewhere.
|
||
|
||
# Send the command to run the test program.
|
||
#
|
||
# If USE_MI_COMMAND is true, the "-exec-run" command is used.
|
||
# Otherwise, the "run" (CLI) command is used. If the global USE_GDB_STUB is
|
||
# true, -exec-continue and continue are used instead of their run counterparts.
|
||
#
|
||
# ARGS is passed as argument to the command used to run the test program.
|
||
# Beware that arguments to "-exec-run" do not have the same semantics as
|
||
# arguments to the "run" command, so USE_MI_COMMAND influences the meaning
|
||
# of ARGS. If USE_MI_COMMAND is true, they are arguments to -exec-run.
|
||
# If USE_MI_COMMAND is false, they are effectively arguments passed
|
||
# to the test program. If the global USE_GDB_STUB is true, ARGS is not used.
|
||
proc mi_run_cmd_full {use_mi_command args} {
|
||
global mi_gdb_prompt use_gdb_stub
|
||
global thread_selected_re
|
||
global library_loaded_re
|
||
|
||
if {$use_mi_command} {
|
||
set run_prefix "220-exec-"
|
||
set run_match "220"
|
||
} else {
|
||
set run_prefix ""
|
||
set run_match ""
|
||
}
|
||
|
||
foreach command [gdb_init_commands] {
|
||
send_gdb "$command\n"
|
||
gdb_expect 30 {
|
||
-re "$mi_gdb_prompt$" { }
|
||
default {
|
||
unresolved "gdb_init_command for target failed"
|
||
return -1
|
||
}
|
||
}
|
||
}
|
||
|
||
if { [mi_gdb_target_load] < 0 } {
|
||
return -1
|
||
}
|
||
|
||
if $use_gdb_stub {
|
||
if [target_info exists gdb,do_reload_on_run] {
|
||
send_gdb "${run_prefix}continue\n"
|
||
gdb_expect 60 {
|
||
-re "${run_match}\\^running\[\r\n\]+\\*running,thread-id=\"\[^\"\]+\"\r\n$mi_gdb_prompt" {}
|
||
-re "${run_match}\\^error.*$mi_gdb_prompt" {return -1}
|
||
default {}
|
||
}
|
||
return 0
|
||
}
|
||
|
||
if [target_info exists gdb,start_symbol] {
|
||
set start [target_info gdb,start_symbol]
|
||
} else {
|
||
set start "start"
|
||
}
|
||
|
||
# HACK: Should either use 000-jump or fix the target code
|
||
# to better handle RUN.
|
||
send_gdb "jump *$start\n"
|
||
warning "Using CLI jump command, expect run-to-main FAIL"
|
||
gdb_expect {
|
||
-re "&\"jump \\*${start}\\\\n\"\[\r\n\]+~\"Continuing at 0x\[0-9A-Fa-f\]+\.\\\\n\"\[\r\n\]+\\^running\[\r\n\]+\\*running,thread-id=\"\[^\"\]+\"\[\r\n\]+${mi_gdb_prompt}" {}
|
||
timeout {
|
||
unresolved "unable to start target"
|
||
return -1
|
||
}
|
||
}
|
||
return 0
|
||
}
|
||
|
||
send_gdb "${run_prefix}run $args\n"
|
||
gdb_expect {
|
||
-re "${run_match}\\^running\r\n(\\*running,thread-id=\"\[^\"\]+\"\r\n|=thread-created,id=\"1\",group-id=\"\[0-9\]+\"\r\n)*(${library_loaded_re})*(${thread_selected_re})?${mi_gdb_prompt}" {
|
||
}
|
||
-re "\\^error,msg=\"The target does not support running in non-stop mode.\"" {
|
||
unsupported "non-stop mode not supported"
|
||
return -1
|
||
}
|
||
timeout {
|
||
unresolved "unable to start target"
|
||
return -1
|
||
}
|
||
}
|
||
# NOTE: Shortly after this there will be a ``000*stopped,...(gdb)''
|
||
|
||
return 0
|
||
}
|
||
|
||
# A wrapper for mi_run_cmd_full which uses -exec-run and
|
||
# -exec-continue, as appropriate. ARGS are passed verbatim to
|
||
# mi_run_cmd_full.
|
||
proc mi_run_cmd {args} {
|
||
return [eval mi_run_cmd_full 1 $args]
|
||
}
|
||
|
||
# A wrapper for mi_run_cmd_full which uses the CLI commands 'run' and
|
||
# 'continue', as appropriate. ARGS are passed verbatim to
|
||
# mi_run_cmd_full.
|
||
proc mi_run_with_cli {args} {
|
||
return [eval mi_run_cmd_full 0 $args]
|
||
}
|
||
|
||
# Starts fresh GDB binary and loads an optional executable into GDB.
|
||
# Usage: mi_clean_restart [executable]
|
||
# EXECUTABLE is the basename of the binary.
|
||
# Return -1 if starting gdb or loading the executable failed.
|
||
|
||
proc mi_clean_restart { args } {
|
||
global srcdir
|
||
global subdir
|
||
global errcnt
|
||
global warncnt
|
||
|
||
if { [llength $args] > 1 } {
|
||
error "bad number of args: [llength $args]"
|
||
}
|
||
|
||
gdb_exit
|
||
|
||
# This is a clean restart, so reset error and warning count.
|
||
set errcnt 0
|
||
set warncnt 0
|
||
|
||
if {[mi_gdb_start]} {
|
||
return -1
|
||
}
|
||
|
||
mi_gdb_reinitialize_dir $srcdir/$subdir
|
||
|
||
if { [llength $args] >= 1 } {
|
||
set executable [lindex $args 0]
|
||
set binfile [standard_output_file ${executable}]
|
||
return [mi_gdb_load ${binfile}]
|
||
}
|
||
|
||
return 0
|
||
}
|
||
|
||
# Just like gdb's "runto" proc, it will run the target to a given
|
||
# function. The big difference here between mi_runto and mi_execute_to
|
||
# is that mi_execute_to must have the inferior running already. This
|
||
# proc will (like gdb's runto) (re)start the inferior, too.
|
||
#
|
||
# FUNC is the linespec of the place to stop (it inserts a breakpoint here).
|
||
# It returns:
|
||
# -1 if failed, timedout
|
||
# 0 if test passed
|
||
#
|
||
# Supported options:
|
||
#
|
||
# -qualified -- pass --qualified to -break-insert
|
||
|
||
proc mi_runto_helper {func run_or_continue args} {
|
||
global mi_gdb_prompt expect_out
|
||
global hex decimal fullname_syntax
|
||
|
||
parse_args {{qualified}}
|
||
|
||
set test "mi runto $func"
|
||
set bp [mi_make_breakpoint -type breakpoint -disp del \
|
||
-func $func\(\\\(.*\\\)\)?]
|
||
set extra_opts ""
|
||
if {$qualified} {
|
||
append extra_opts "--qualified"
|
||
}
|
||
mi_gdb_test "200-break-insert $extra_opts -t $func" "200\\^done,$bp" \
|
||
"breakpoint at $func"
|
||
|
||
if {$run_or_continue == "run"} {
|
||
if { [mi_run_cmd] < 0 } {
|
||
return -1
|
||
}
|
||
} else {
|
||
mi_send_resuming_command "exec-continue" "$test"
|
||
}
|
||
|
||
mi_expect_stop "breakpoint-hit" $func ".*" ".*" "\[0-9\]+" { "" "disp=\"del\"" } $test
|
||
}
|
||
|
||
proc mi_runto {func} {
|
||
return [mi_runto_helper $func "run"]
|
||
}
|
||
|
||
# Just like runto_main but works with the MI interface.
|
||
|
||
proc mi_runto_main {} {
|
||
return [mi_runto_helper "main" "run" -qualified]
|
||
}
|
||
|
||
# Next to the next statement
|
||
# For return values, see mi_execute_to_helper
|
||
|
||
proc mi_next { test } {
|
||
return [mi_next_to {.*} {.*} {.*} {.*} $test]
|
||
}
|
||
|
||
|
||
# Step to the next statement
|
||
# For return values, see mi_execute_to_helper
|
||
|
||
proc mi_step { test } {
|
||
return [mi_step_to {.*} {.*} {.*} {.*} $test]
|
||
}
|
||
|
||
set async "unknown"
|
||
|
||
proc mi_detect_async {} {
|
||
global async
|
||
global mi_gdb_prompt
|
||
|
||
send_gdb "show mi-async\n"
|
||
|
||
gdb_expect {
|
||
-re "asynchronous mode is on...*$mi_gdb_prompt$" {
|
||
set async 1
|
||
}
|
||
-re ".*$mi_gdb_prompt$" {
|
||
set async 0
|
||
}
|
||
timeout {
|
||
set async 0
|
||
}
|
||
}
|
||
return $async
|
||
}
|
||
|
||
# Wait for MI *stopped notification to appear.
|
||
# The REASON, FUNC, ARGS, FILE and LINE are regular expressions
|
||
# to match against whatever is output in *stopped. FILE may also match
|
||
# filename of a file without debug info. ARGS should not include [] the
|
||
# list of argument is enclosed in, and other regular expressions should
|
||
# not include quotes.
|
||
# If EXTRA is a list of one element, it's the regular expression
|
||
# for output expected right after *stopped, and before GDB prompt.
|
||
# If EXTRA is a list of two elements, the first element is for
|
||
# output right after *stopped, and the second element is output
|
||
# right after reason field. The regex after reason should not include
|
||
# the comma separating it from the following fields.
|
||
#
|
||
# When we fail to match output at all, -1 is returned. If FILE does
|
||
# match and the target system has no debug info for FILE return 0.
|
||
# Otherwise, the line at which we stop is returned. This is useful when
|
||
# exact line is not possible to specify for some reason -- one can pass
|
||
# the .* or "\[0-9\]*" regexps for line, and then check the line
|
||
# programmatically.
|
||
#
|
||
# Do not pass .* for any argument if you are expecting more than one stop.
|
||
proc mi_expect_stop { reason func args file line extra test } {
|
||
|
||
global mi_gdb_prompt
|
||
global hex
|
||
global decimal
|
||
global fullname_syntax
|
||
global async
|
||
global thread_selected_re
|
||
global breakpoint_re
|
||
|
||
set any "\[^\n\]*"
|
||
|
||
set after_stopped ""
|
||
set after_reason ""
|
||
if { [llength $extra] == 2 } {
|
||
set after_stopped [lindex $extra 0]
|
||
set after_reason [lindex $extra 1]
|
||
set after_reason "${after_reason},"
|
||
} elseif { [llength $extra] == 1 } {
|
||
set after_stopped [lindex $extra 0]
|
||
}
|
||
|
||
if {$async} {
|
||
set prompt_re ""
|
||
} else {
|
||
set prompt_re "$mi_gdb_prompt$"
|
||
}
|
||
|
||
if { $reason == "really-no-reason" } {
|
||
gdb_expect {
|
||
-re "\\*stopped\r\n$prompt_re" {
|
||
pass "$test"
|
||
}
|
||
timeout {
|
||
fail "$test (timeout)"
|
||
}
|
||
}
|
||
return
|
||
}
|
||
|
||
if { $reason == "exited-normally" } {
|
||
|
||
gdb_expect {
|
||
-re "\\*stopped,reason=\"exited-normally\"\r\n$prompt_re" {
|
||
pass "$test"
|
||
}
|
||
-re ".*$mi_gdb_prompt$" {fail "continue to end (2)"}
|
||
timeout {
|
||
fail "$test (timeout)"
|
||
}
|
||
}
|
||
return
|
||
}
|
||
if { $reason == "exited" } {
|
||
gdb_expect {
|
||
-re "\\*stopped,reason=\"exited\",exit-code=\"\[0-7\]+\"\r\n$prompt_re" {
|
||
pass "$test"
|
||
}
|
||
-re ".*$mi_gdb_prompt$" {
|
||
fail "$test (inferior not stopped)"
|
||
}
|
||
timeout {
|
||
fail "$test (timeout)"
|
||
}
|
||
}
|
||
return
|
||
}
|
||
|
||
if { $reason == "solib-event" } {
|
||
set pattern "\\*stopped,reason=\"solib-event\",thread-id=\"$decimal\",stopped-threads=$any\r\n($thread_selected_re|$breakpoint_re)*$prompt_re"
|
||
verbose -log "mi_expect_stop: expecting: $pattern"
|
||
gdb_expect {
|
||
-re "$pattern" {
|
||
pass "$test"
|
||
}
|
||
timeout {
|
||
fail "$test (timeout)"
|
||
}
|
||
}
|
||
return
|
||
}
|
||
|
||
set args "\\\[$args\\\]"
|
||
|
||
set bn ""
|
||
set ebn ""
|
||
if { $reason == "breakpoint-hit" } {
|
||
set bn {bkptno="[0-9]+",}
|
||
} elseif { $reason == "solib-event" } {
|
||
set bn ".*"
|
||
} elseif { $reason == "exception-caught" } {
|
||
set ebn {bkptno="[0-9]+",}
|
||
set bn ".*"
|
||
set reason "breakpoint-hit"
|
||
}
|
||
|
||
set r ""
|
||
if { $reason != "" } {
|
||
set r "reason=\"$reason\","
|
||
}
|
||
|
||
|
||
set a $after_reason
|
||
|
||
verbose -log "mi_expect_stop: expecting: \\*stopped,${ebn}${r}${a}${bn}frame=\{addr=\"$hex\",func=\"$func\",args=$args,(?:file=\"$any$file\",fullname=\"${fullname_syntax}$file\",line=\"$line\",arch=\"$any\"|from=\"$file\")\}$after_stopped,thread-id=\"$decimal\",stopped-threads=$any\r\n($thread_selected_re|$breakpoint_re)*$prompt_re"
|
||
gdb_expect {
|
||
-re "\\*stopped,${ebn}${r}${a}${bn}frame=\{addr=\"$hex\",func=\"$func\",args=$args,(?:file=\"$any$file\",fullname=\"${fullname_syntax}$file\",line=\"($line)\",arch=\"$any\"|from=\"$file\")\}$after_stopped,thread-id=\"$decimal\",stopped-threads=$any\r\n($thread_selected_re|$breakpoint_re)*$prompt_re" {
|
||
pass "$test"
|
||
if {[array names expect_out "2,string"] != ""} {
|
||
return $expect_out(2,string)
|
||
}
|
||
# No debug info available but $file does match.
|
||
return 0
|
||
}
|
||
-re "\\*stopped,${ebn}${r}${a}${bn}frame=\{addr=\"$hex\",func=\"$any\",args=\[\\\[\{\]$any\[\\\]\}\],file=\"$any\",fullname=\"${fullname_syntax}$any\",line=\"\[0-9\]*\",arch=\"$any\"\}$after_stopped,thread-id=\"$decimal\",stopped-threads=$any\r\n($thread_selected_re|$breakpoint_re)*$prompt_re" {
|
||
verbose -log "got $expect_out(buffer)"
|
||
fail "$test (stopped at wrong place)"
|
||
return -1
|
||
}
|
||
-re ".*\r\n$mi_gdb_prompt$" {
|
||
verbose -log "got $expect_out(buffer)"
|
||
fail "$test (unknown output after running)"
|
||
return -1
|
||
}
|
||
timeout {
|
||
fail "$test (timeout)"
|
||
return -1
|
||
}
|
||
}
|
||
}
|
||
|
||
# Wait for MI *stopped notification related to an interrupt request to
|
||
# appear.
|
||
proc mi_expect_interrupt { test } {
|
||
global mi_gdb_prompt
|
||
global decimal
|
||
global async
|
||
|
||
if {$async} {
|
||
set prompt_re ""
|
||
} else {
|
||
set prompt_re "$mi_gdb_prompt"
|
||
}
|
||
|
||
set r_nonstop "reason=\"signal-received\",signal-name=\"0\",signal-meaning=\"Signal 0\""
|
||
set r_allstop "reason=\"signal-received\",signal-name=\"SIGINT\",signal-meaning=\"Interrupt\""
|
||
set r "(${r_nonstop}|${r_allstop})"
|
||
set any "\[^\n\]*"
|
||
|
||
# A signal can land anywhere, just ignore the location
|
||
verbose -log "mi_expect_interrupt: expecting: \\*stopped,${r}$any\r\n$prompt_re"
|
||
gdb_expect {
|
||
-re "\\*stopped,${r}$any\r\n$prompt_re" {
|
||
pass "$test"
|
||
return 0
|
||
}
|
||
-re ".*\r\n$mi_gdb_prompt" {
|
||
verbose -log "got $expect_out(buffer)"
|
||
fail "$test (unknown output after running)"
|
||
return -1
|
||
}
|
||
timeout {
|
||
fail "$test (timeout)"
|
||
return -1
|
||
}
|
||
}
|
||
}
|
||
|
||
# cmd should not include the number or newline (i.e. "exec-step 3", not
|
||
# "220-exec-step 3\n"
|
||
|
||
# Can not match -re ".*\r\n${mi_gdb_prompt}", because of false positives
|
||
# after the first prompt is printed.
|
||
|
||
proc mi_execute_to { cmd reason func args file line extra test } {
|
||
mi_send_resuming_command "$cmd" "$test"
|
||
set r [mi_expect_stop $reason $func $args $file $line $extra $test]
|
||
return $r
|
||
}
|
||
|
||
proc mi_next_to { func args file line test } {
|
||
mi_execute_to "exec-next" "end-stepping-range" "$func" "$args" \
|
||
"$file" "$line" "" "$test"
|
||
}
|
||
|
||
proc mi_step_to { func args file line test } {
|
||
mi_execute_to "exec-step" "end-stepping-range" "$func" "$args" \
|
||
"$file" "$line" "" "$test"
|
||
}
|
||
|
||
proc mi_finish_to { func args file line result ret test } {
|
||
mi_execute_to "exec-finish" "function-finished" "$func" "$args" \
|
||
"$file" "$line" \
|
||
",gdb-result-var=\"$result\",return-value=\"$ret\"" \
|
||
"$test"
|
||
}
|
||
|
||
proc mi_continue_to {func} {
|
||
mi_runto_helper $func "continue"
|
||
}
|
||
|
||
proc mi0_execute_to { cmd reason func args file line extra test } {
|
||
mi_execute_to_helper "$cmd" "$reason" "$func" "\{$args\}" \
|
||
"$file" "$line" "$extra" "$test"
|
||
}
|
||
|
||
proc mi0_next_to { func args file line test } {
|
||
mi0_execute_to "exec-next" "end-stepping-range" "$func" "$args" \
|
||
"$file" "$line" "" "$test"
|
||
}
|
||
|
||
proc mi0_step_to { func args file line test } {
|
||
mi0_execute_to "exec-step" "end-stepping-range" "$func" "$args" \
|
||
"$file" "$line" "" "$test"
|
||
}
|
||
|
||
proc mi0_finish_to { func args file line result ret test } {
|
||
mi0_execute_to "exec-finish" "function-finished" "$func" "$args" \
|
||
"$file" "$line" \
|
||
",gdb-result-var=\"$result\",return-value=\"$ret\"" \
|
||
"$test"
|
||
}
|
||
|
||
proc mi0_continue_to { bkptno func args file line test } {
|
||
mi0_execute_to "exec-continue" "breakpoint-hit\",bkptno=\"$bkptno" \
|
||
"$func" "$args" "$file" "$line" "" "$test"
|
||
}
|
||
|
||
# Creates a breakpoint and checks the reported fields are as expected.
|
||
# This procedure takes the same options as mi_make_breakpoint and
|
||
# returns the breakpoint regexp from that procedure.
|
||
|
||
proc mi_create_breakpoint {location test args} {
|
||
set bp [eval mi_make_breakpoint $args]
|
||
mi_gdb_test "222-break-insert $location" "222\\^done,$bp" $test
|
||
return $bp
|
||
}
|
||
|
||
# Like mi_create_breakpoint, but creates a breakpoint with multiple
|
||
# locations using mi_make_breakpoint_multi instead.
|
||
|
||
proc mi_create_breakpoint_multi {location test args} {
|
||
set bp [eval mi_make_breakpoint_multi $args]
|
||
mi_gdb_test "222-break-insert $location" "222\\^done,$bp" $test
|
||
return $bp
|
||
}
|
||
|
||
# Creates varobj named NAME for EXPRESSION.
|
||
# Name cannot be "-".
|
||
proc mi_create_varobj { name expression testname } {
|
||
mi_gdb_test "-var-create $name * $expression" \
|
||
"\\^done,name=\"$name\",numchild=\"\[0-9\]+\",value=\".*\",type=.*,has_more=\"0\"" \
|
||
$testname
|
||
}
|
||
|
||
proc mi_create_floating_varobj { name expression testname } {
|
||
mi_gdb_test "-var-create $name @ $expression" \
|
||
"\\^done,name=\"$name\",numchild=\"\(-1\|\[0-9\]+\)\",value=\".*\",type=.*" \
|
||
$testname
|
||
}
|
||
|
||
|
||
# Same as mi_create_varobj, but also checks the reported type
|
||
# of the varobj.
|
||
proc mi_create_varobj_checked { name expression type testname } {
|
||
mi_gdb_test "-var-create $name * $expression" \
|
||
"\\^done,name=\"$name\",numchild=\"\[0-9\]+\",value=\".*\",type=\"$type\".*" \
|
||
$testname
|
||
}
|
||
|
||
# Same as mi_create_floating_varobj, but assumes the test is creating
|
||
# a dynamic varobj that has children, so the value must be "{...}".
|
||
# The "has_more" attribute is checked.
|
||
proc mi_create_dynamic_varobj {name expression has_more testname} {
|
||
mi_gdb_test "-var-create $name @ $expression" \
|
||
"\\^done,name=\"$name\",numchild=\"0\",value=\"{\\.\\.\\.}\",type=.*,has_more=\"${has_more}\"" \
|
||
$testname
|
||
}
|
||
|
||
# Deletes the specified NAME.
|
||
proc mi_delete_varobj { name testname } {
|
||
mi_gdb_test "-var-delete $name" \
|
||
"\\^done,ndeleted=.*" \
|
||
$testname
|
||
}
|
||
|
||
# Updates varobj named NAME and checks that all varobjs in EXPECTED
|
||
# are reported as updated, and no other varobj is updated.
|
||
# Assumes that no varobj is out of scope and that no varobj changes
|
||
# types.
|
||
proc mi_varobj_update { name expected testname } {
|
||
set er "\\^done,changelist=\\\["
|
||
set first 1
|
||
foreach item $expected {
|
||
set v "{name=\"$item\",in_scope=\"true\",type_changed=\"false\",has_more=\".\"}"
|
||
if {$first == 1} {
|
||
set er "$er$v"
|
||
set first 0
|
||
} else {
|
||
set er "$er,$v"
|
||
}
|
||
}
|
||
set er "$er\\\]"
|
||
|
||
verbose -log "Expecting: $er" 2
|
||
mi_gdb_test "-var-update $name" $er $testname
|
||
}
|
||
|
||
proc mi_varobj_update_with_child_type_change { name child_name new_type new_children testname } {
|
||
set v "{name=\"$child_name\",in_scope=\"true\",type_changed=\"true\",new_type=\"$new_type\",new_num_children=\"$new_children\",has_more=\".\"}"
|
||
set er "\\^done,changelist=\\\[$v\\\]"
|
||
verbose -log "Expecting: $er"
|
||
mi_gdb_test "-var-update $name" $er $testname
|
||
}
|
||
|
||
proc mi_varobj_update_with_type_change { name new_type new_children testname } {
|
||
mi_varobj_update_with_child_type_change $name $name $new_type $new_children $testname
|
||
}
|
||
|
||
# A helper that turns a key/value list into a regular expression
|
||
# matching some MI output.
|
||
proc mi_varobj_update_kv_helper {list} {
|
||
set first 1
|
||
set rx ""
|
||
foreach {key value} $list {
|
||
if {!$first} {
|
||
append rx ,
|
||
}
|
||
set first 0
|
||
if {$key == "new_children"} {
|
||
append rx "$key=\\\[$value\\\]"
|
||
} else {
|
||
append rx "$key=\"$value\""
|
||
}
|
||
}
|
||
return $rx
|
||
}
|
||
|
||
# A helper for mi_varobj_update_dynamic that computes a match
|
||
# expression given a child list.
|
||
proc mi_varobj_update_dynamic_helper {children} {
|
||
set crx ""
|
||
|
||
set first 1
|
||
foreach child $children {
|
||
if {!$first} {
|
||
append crx ,
|
||
}
|
||
set first 0
|
||
append crx "{"
|
||
append crx [mi_varobj_update_kv_helper $child]
|
||
append crx "}"
|
||
}
|
||
|
||
return $crx
|
||
}
|
||
|
||
# Update a dynamic varobj named NAME. CHILDREN is a list of children
|
||
# that have been updated; NEW_CHILDREN is a list of children that were
|
||
# added to the primary varobj. Each child is a list of key/value
|
||
# pairs that are expected. SELF is a key/value list holding
|
||
# information about the varobj itself. TESTNAME is the name of the
|
||
# test.
|
||
proc mi_varobj_update_dynamic {name testname self children new_children} {
|
||
if {[llength $new_children]} {
|
||
set newrx [mi_varobj_update_dynamic_helper $new_children]
|
||
lappend self new_children $newrx
|
||
}
|
||
set selfrx [mi_varobj_update_kv_helper $self]
|
||
set crx [mi_varobj_update_dynamic_helper $children]
|
||
|
||
set er "\\^done,changelist=\\\[\{name=\"$name\",in_scope=\"true\""
|
||
append er ",$selfrx\}"
|
||
if {"$crx" != ""} {
|
||
append er ",$crx"
|
||
}
|
||
append er "\\\]"
|
||
|
||
verbose -log "Expecting: $er"
|
||
mi_gdb_test "-var-update $name" $er $testname
|
||
}
|
||
|
||
proc mi_check_varobj_value { name value testname } {
|
||
|
||
mi_gdb_test "-var-evaluate-expression $name" \
|
||
"\\^done,value=\"$value\"" \
|
||
$testname
|
||
}
|
||
|
||
# Helper proc which constructs a child regexp for
|
||
# mi_list_varobj_children and mi_varobj_update_dynamic.
|
||
proc mi_child_regexp {children add_child} {
|
||
set children_exp {}
|
||
|
||
if {$add_child} {
|
||
set pre "child="
|
||
} else {
|
||
set pre ""
|
||
}
|
||
|
||
foreach item $children {
|
||
|
||
set name [lindex $item 0]
|
||
set exp [lindex $item 1]
|
||
set numchild [lindex $item 2]
|
||
if {[llength $item] == 5} {
|
||
set type [lindex $item 3]
|
||
set value [lindex $item 4]
|
||
|
||
lappend children_exp\
|
||
"$pre{name=\"$name\",exp=\"$exp\",numchild=\"$numchild\",value=\"$value\",type=\"$type\"(,thread-id=\"\[0-9\]+\")?}"
|
||
} elseif {[llength $item] == 4} {
|
||
set type [lindex $item 3]
|
||
|
||
lappend children_exp\
|
||
"$pre{name=\"$name\",exp=\"$exp\",numchild=\"$numchild\",type=\"$type\"(,thread-id=\"\[0-9\]+\")?}"
|
||
} else {
|
||
lappend children_exp\
|
||
"$pre{name=\"$name\",exp=\"$exp\",numchild=\"$numchild\"(,thread-id=\"\[0-9\]+\")?}"
|
||
}
|
||
}
|
||
return [join $children_exp ","]
|
||
}
|
||
|
||
# Check the results of the:
|
||
#
|
||
# -var-list-children VARNAME
|
||
#
|
||
# command. The CHILDREN parement should be a list of lists.
|
||
# Each inner list can have either 3 or 4 elements, describing
|
||
# fields that gdb is expected to report for child variable object,
|
||
# in the following order
|
||
#
|
||
# - Name
|
||
# - Expression
|
||
# - Number of children
|
||
# - Type
|
||
#
|
||
# If inner list has 3 elements, the gdb is expected to output no
|
||
# type for a child and no value.
|
||
#
|
||
# If the inner list has 4 elements, gdb output is expected to
|
||
# have no value.
|
||
#
|
||
proc mi_list_varobj_children { varname children testname } {
|
||
mi_list_varobj_children_range $varname "" "" [llength $children] $children \
|
||
$testname
|
||
}
|
||
|
||
# Like mi_list_varobj_children, but sets a subrange. NUMCHILDREN is
|
||
# the total number of children.
|
||
proc mi_list_varobj_children_range {varname from to numchildren children testname} {
|
||
set options ""
|
||
if {[llength $varname] == 2} {
|
||
set options [lindex $varname 1]
|
||
set varname [lindex $varname 0]
|
||
}
|
||
|
||
set children_exp_j [mi_child_regexp $children 1]
|
||
if {$numchildren} {
|
||
set expected "\\^done,numchild=\".*\",children=\\\[$children_exp_j.*\\\]"
|
||
} {
|
||
set expected "\\^done,numchild=\"0\""
|
||
}
|
||
|
||
if {"$to" == ""} {
|
||
append expected ",has_more=\"0\""
|
||
} elseif {$to >= 0 && $numchildren > $to} {
|
||
append expected ",has_more=\"1\""
|
||
} else {
|
||
append expected ",has_more=\"0\""
|
||
}
|
||
|
||
verbose -log "Expecting: $expected"
|
||
|
||
mi_gdb_test "-var-list-children $options $varname $from $to" \
|
||
$expected $testname
|
||
}
|
||
|
||
# Verifies that variable object VARNAME has NUMBER children,
|
||
# where each one is named $VARNAME.<index-of-child> and has type TYPE.
|
||
proc mi_list_array_varobj_children { varname number type testname } {
|
||
mi_list_array_varobj_children_with_index $varname $number 0 $type $testname
|
||
}
|
||
|
||
# Same as mi_list_array_varobj_children, but allowing to pass a start index
|
||
# for an array.
|
||
proc mi_list_array_varobj_children_with_index { varname number start_index \
|
||
type testname } {
|
||
set t {}
|
||
set index $start_index
|
||
for {set i 0} {$i < $number} {incr i} {
|
||
lappend t [list $varname.$index $index 0 $type]
|
||
incr index
|
||
}
|
||
mi_list_varobj_children $varname $t $testname
|
||
}
|
||
|
||
# A list of two-element lists. First element of each list is
|
||
# a Tcl statement, and the second element is the line
|
||
# number of source C file where the statement originates.
|
||
set mi_autotest_data ""
|
||
# The name of the source file for autotesting.
|
||
set mi_autotest_source ""
|
||
|
||
proc count_newlines { string } {
|
||
return [regexp -all "\n" $string]
|
||
}
|
||
|
||
# Prepares for running inline tests in FILENAME.
|
||
# See comments for mi_run_inline_test for detailed
|
||
# explanation of the idea and syntax.
|
||
proc mi_prepare_inline_tests { filename } {
|
||
|
||
global srcdir
|
||
global subdir
|
||
global mi_autotest_source
|
||
global mi_autotest_data
|
||
|
||
set mi_autotest_data {}
|
||
|
||
set mi_autotest_source $filename
|
||
|
||
if { ! [regexp "^/" "$filename"] } then {
|
||
set filename "$srcdir/$subdir/$filename"
|
||
}
|
||
|
||
set chan [open $filename]
|
||
set content [read $chan]
|
||
set line_number 1
|
||
while {1} {
|
||
set start [string first "/*:" $content]
|
||
if {$start != -1} {
|
||
set end [string first ":*/" $content]
|
||
if {$end == -1} {
|
||
error "Unterminated special comment in $filename"
|
||
}
|
||
|
||
set prefix [string range $content 0 $start]
|
||
set prefix_newlines [count_newlines $prefix]
|
||
|
||
set line_number [expr $line_number+$prefix_newlines]
|
||
set comment_line $line_number
|
||
|
||
set comment [string range $content [expr $start+3] [expr $end-1]]
|
||
|
||
set comment_newlines [count_newlines $comment]
|
||
set line_number [expr $line_number+$comment_newlines]
|
||
|
||
set comment [string trim $comment]
|
||
set content [string range $content [expr $end+3] \
|
||
[string length $content]]
|
||
lappend mi_autotest_data [list $comment $comment_line]
|
||
} else {
|
||
break
|
||
}
|
||
}
|
||
close $chan
|
||
}
|
||
|
||
# Helper to mi_run_inline_test below.
|
||
# Return the list of all (statement,line_number) lists
|
||
# that comprise TESTCASE. The begin and end markers
|
||
# are not included.
|
||
proc mi_get_inline_test {testcase} {
|
||
|
||
global mi_gdb_prompt
|
||
global mi_autotest_data
|
||
global mi_autotest_source
|
||
|
||
set result {}
|
||
|
||
set seen_begin 0
|
||
set seen_end 0
|
||
foreach l $mi_autotest_data {
|
||
|
||
set comment [lindex $l 0]
|
||
|
||
if {$comment == "BEGIN: $testcase"} {
|
||
set seen_begin 1
|
||
} elseif {$comment == "END: $testcase"} {
|
||
set seen_end 1
|
||
break
|
||
} elseif {$seen_begin==1} {
|
||
lappend result $l
|
||
}
|
||
}
|
||
|
||
if {$seen_begin == 0} {
|
||
error "Autotest $testcase not found"
|
||
}
|
||
|
||
if {$seen_begin == 1 && $seen_end == 0} {
|
||
error "Missing end marker for test $testcase"
|
||
}
|
||
|
||
return $result
|
||
}
|
||
|
||
# Sets temporary breakpoint at LOCATION.
|
||
proc mi_tbreak {location} {
|
||
|
||
global mi_gdb_prompt
|
||
|
||
mi_gdb_test "-break-insert -t $location" \
|
||
{\^done,bkpt=.*} \
|
||
"run to $location (set breakpoint)"
|
||
}
|
||
|
||
# Send COMMAND that must be a command that resumes
|
||
# the inferior (run/continue/next/etc) and consumes
|
||
# the "^running" output from it.
|
||
proc mi_send_resuming_command_raw {command test} {
|
||
|
||
global mi_gdb_prompt
|
||
global thread_selected_re
|
||
global library_loaded_re
|
||
|
||
send_gdb "$command\n"
|
||
gdb_expect {
|
||
-re "\\^running\r\n\\*running,thread-id=\"\[^\"\]+\"\r\n($library_loaded_re)*($thread_selected_re)?${mi_gdb_prompt}" {
|
||
# Note that lack of 'pass' call here -- this works around limitation
|
||
# in DejaGNU xfail mechanism. mi-until.exp has this:
|
||
#
|
||
# setup_kfail gdb/2104 "*-*-*"
|
||
# mi_execute_to ...
|
||
#
|
||
# and mi_execute_to uses mi_send_resuming_command. If we use 'pass' here,
|
||
# it will reset kfail, so when the actual test fails, it will be flagged
|
||
# as real failure.
|
||
return 0
|
||
}
|
||
-re "\\^error,msg=\"Displaced stepping is only supported in ARM mode\".*" {
|
||
unsupported "$test (Thumb mode)"
|
||
return -1
|
||
}
|
||
-re "\\^error,msg=.*" {
|
||
fail "$test (MI error)"
|
||
return -1
|
||
}
|
||
-re ".*${mi_gdb_prompt}" {
|
||
fail "$test (failed to resume)"
|
||
return -1
|
||
}
|
||
timeout {
|
||
fail "$test"
|
||
return -1
|
||
}
|
||
}
|
||
}
|
||
|
||
proc mi_send_resuming_command {command test} {
|
||
mi_send_resuming_command_raw -$command $test
|
||
}
|
||
|
||
# Helper to mi_run_inline_test below.
|
||
# Sets a temporary breakpoint at LOCATION and runs
|
||
# the program using COMMAND. When the program is stopped
|
||
# returns the line at which it. Returns -1 if line cannot
|
||
# be determined.
|
||
# Does not check that the line is the same as requested.
|
||
# The caller can check itself if required.
|
||
proc mi_continue_to_line {location test} {
|
||
|
||
mi_tbreak $location
|
||
mi_send_resuming_command "exec-continue" "run to $location (exec-continue)"
|
||
return [mi_get_stop_line $test]
|
||
}
|
||
|
||
# Wait until gdb prints the current line.
|
||
proc mi_get_stop_line {test} {
|
||
|
||
global mi_gdb_prompt
|
||
global async
|
||
|
||
if {$async} {
|
||
set prompt_re ""
|
||
} else {
|
||
set prompt_re "$mi_gdb_prompt$"
|
||
}
|
||
|
||
gdb_expect {
|
||
-re ".*line=\"(\[0-9\]*)\".*\r\n$prompt_re" {
|
||
return $expect_out(1,string)
|
||
}
|
||
-re ".*$mi_gdb_prompt" {
|
||
fail "wait for stop ($test)"
|
||
}
|
||
timeout {
|
||
fail "wait for stop ($test)"
|
||
}
|
||
}
|
||
}
|
||
|
||
# Run a MI test embedded in comments in a C file.
|
||
# The C file should contain special comments in the following
|
||
# three forms:
|
||
#
|
||
# /*: BEGIN: testname :*/
|
||
# /*: <Tcl statements> :*/
|
||
# /*: END: testname :*/
|
||
#
|
||
# This procedure find the begin and end marker for the requested
|
||
# test. Then, a temporary breakpoint is set at the begin
|
||
# marker and the program is run (from start).
|
||
#
|
||
# After that, for each special comment between the begin and end
|
||
# marker, the Tcl statements are executed. It is assumed that
|
||
# for each comment, the immediately preceding line is executable
|
||
# C statement. Then, gdb will be single-stepped until that
|
||
# preceding C statement is executed, and after that the
|
||
# Tcl statements in the comment will be executed.
|
||
#
|
||
# For example:
|
||
#
|
||
# /*: BEGIN: assignment-test :*/
|
||
# v = 10;
|
||
# /*: <Tcl code to check that 'v' is indeed 10 :*/
|
||
# /*: END: assignment-test :*/
|
||
#
|
||
# The mi_prepare_inline_tests function should be called before
|
||
# calling this function. A given C file can contain several
|
||
# inline tests. The names of the tests must be unique within one
|
||
# C file.
|
||
#
|
||
proc mi_run_inline_test { testcase } {
|
||
|
||
global mi_gdb_prompt
|
||
global hex
|
||
global decimal
|
||
global fullname_syntax
|
||
global mi_autotest_source
|
||
|
||
set commands [mi_get_inline_test $testcase]
|
||
|
||
set first 1
|
||
set line_now 1
|
||
|
||
foreach c $commands {
|
||
set statements [lindex $c 0]
|
||
set line [lindex $c 1]
|
||
set line [expr $line-1]
|
||
|
||
# We want gdb to be stopped at the expression immediately
|
||
# before the comment. If this is the first comment, the
|
||
# program is either not started yet or is in some random place,
|
||
# so we run it. For further comments, we might be already
|
||
# standing at the right line. If not continue till the
|
||
# right line.
|
||
|
||
if {$first==1} {
|
||
# Start the program afresh.
|
||
mi_tbreak "$mi_autotest_source:$line"
|
||
mi_run_cmd
|
||
set line_now [mi_get_stop_line "$testcase: step to $line"]
|
||
set first 0
|
||
} elseif {$line_now!=$line} {
|
||
set line_now [mi_continue_to_line "$mi_autotest_source:$line" "continue to $line"]
|
||
}
|
||
|
||
if {$line_now!=$line} {
|
||
fail "$testcase: go to line $line"
|
||
}
|
||
|
||
# We're not at the statement right above the comment.
|
||
# Execute that statement so that the comment can test
|
||
# the state after the statement is executed.
|
||
|
||
# Single-step past the line.
|
||
if { [mi_send_resuming_command "exec-next" "$testcase: step over $line"] != 0 } {
|
||
return -1
|
||
}
|
||
set line_now [mi_get_stop_line "$testcase: step over $line"]
|
||
|
||
# We probably want to use 'uplevel' so that statements
|
||
# have direct access to global variables that the
|
||
# main 'exp' file has set up. But it's not yet clear,
|
||
# will need more experience to be sure.
|
||
eval $statements
|
||
}
|
||
}
|
||
|
||
proc get_mi_thread_list {name} {
|
||
global expect_out
|
||
|
||
# MI will return a list of thread ids:
|
||
#
|
||
# -thread-list-ids
|
||
# ^done,thread-ids=[thread-id="1",thread-id="2",...],number-of-threads="N"
|
||
# (gdb)
|
||
mi_gdb_test "-thread-list-ids" \
|
||
{.*\^done,thread-ids={(thread-id="[0-9]+"(,)?)+},current-thread-id="[0-9]+",number-of-threads="[0-9]+"} \
|
||
"-thread_list_ids ($name)"
|
||
|
||
set output {}
|
||
if {[info exists expect_out(buffer)]} {
|
||
set output $expect_out(buffer)
|
||
}
|
||
|
||
set thread_list {}
|
||
if {![regexp {thread-ids=\{(thread-id="[0-9]+"(,)?)*\}} $output threads]} {
|
||
fail "finding threads in MI output ($name)"
|
||
} else {
|
||
pass "finding threads in MI output ($name)"
|
||
|
||
# Make list of console threads
|
||
set start [expr {[string first \{ $threads] + 1}]
|
||
set end [expr {[string first \} $threads] - 1}]
|
||
set threads [string range $threads $start $end]
|
||
foreach thread [split $threads ,] {
|
||
if {[scan $thread {thread-id="%d"} num]} {
|
||
lappend thread_list $num
|
||
}
|
||
}
|
||
}
|
||
|
||
return $thread_list
|
||
}
|
||
|
||
# Check that MI and the console know of the same threads.
|
||
# Appends NAME to all test names.
|
||
proc check_mi_and_console_threads {name} {
|
||
global expect_out
|
||
|
||
mi_gdb_test "-thread-list-ids" \
|
||
{.*\^done,thread-ids={(thread-id="[0-9]+"(,)*)+},current-thread-id="[0-9]+",number-of-threads="[0-9]+"} \
|
||
"-thread-list-ids ($name)"
|
||
set mi_output {}
|
||
if {[info exists expect_out(buffer)]} {
|
||
set mi_output $expect_out(buffer)
|
||
}
|
||
|
||
# GDB will return a list of thread ids and some more info:
|
||
#
|
||
# (gdb)
|
||
# -interpreter-exec console "info threads"
|
||
# ~" 4 Thread 2051 (LWP 7734) 0x401166b1 in __libc_nanosleep () at __libc_nanosleep:-1"
|
||
# ~" 3 Thread 1026 (LWP 7733) () at __libc_nanosleep:-1"
|
||
# ~" 2 Thread 2049 (LWP 7732) 0x401411f8 in __poll (fds=0x804bb24, nfds=1, timeout=2000) at ../sysdeps/unix/sysv/linux/poll.c:63"
|
||
# ~"* 1 Thread 1024 (LWP 7731) main (argc=1, argv=0xbfffdd94) at ../../../src/gdb/testsuite/gdb.mi/pthreads.c:160"
|
||
# FIXME: kseitz/2002-09-05: Don't use the hack-cli method.
|
||
mi_gdb_test "info threads" \
|
||
{.*(~".*"[\r\n]*)+.*} \
|
||
"info threads ($name)"
|
||
set console_output {}
|
||
if {[info exists expect_out(buffer)]} {
|
||
set console_output $expect_out(buffer)
|
||
}
|
||
|
||
# Make a list of all known threads to console (gdb's thread IDs)
|
||
set console_thread_list {}
|
||
foreach line [split $console_output \n] {
|
||
if {[string index $line 0] == "~"} {
|
||
# This is a line from the console; trim off "~", " ", "*", and "\""
|
||
set line [string trim $line ~\ \"\*]
|
||
if {[scan $line "%d" id] == 1} {
|
||
lappend console_thread_list $id
|
||
}
|
||
}
|
||
}
|
||
|
||
# Now find the result string from MI
|
||
set mi_result ""
|
||
foreach line [split $mi_output \n] {
|
||
if {[string range $line 0 4] == "^done"} {
|
||
set mi_result $line
|
||
}
|
||
}
|
||
if {$mi_result == ""} {
|
||
fail "finding MI result string ($name)"
|
||
} else {
|
||
pass "finding MI result string ($name)"
|
||
}
|
||
|
||
# Finally, extract the thread ids and compare them to the console
|
||
set num_mi_threads_str ""
|
||
if {![regexp {number-of-threads="[0-9]+"} $mi_result num_mi_threads_str]} {
|
||
fail "finding number of threads in MI output ($name)"
|
||
} else {
|
||
pass "finding number of threads in MI output ($name)"
|
||
|
||
# Extract the number of threads from the MI result
|
||
if {![scan $num_mi_threads_str {number-of-threads="%d"} num_mi_threads]} {
|
||
fail "got number of threads from MI ($name)"
|
||
} else {
|
||
pass "got number of threads from MI ($name)"
|
||
|
||
# Check if MI and console have same number of threads
|
||
if {$num_mi_threads != [llength $console_thread_list]} {
|
||
fail "console and MI have same number of threads ($name)"
|
||
} else {
|
||
pass "console and MI have same number of threads ($name)"
|
||
|
||
# Get MI thread list
|
||
set mi_thread_list [get_mi_thread_list $name]
|
||
|
||
# Check if MI and console have the same threads
|
||
set fails 0
|
||
foreach ct [lsort $console_thread_list] mt [lsort $mi_thread_list] {
|
||
if {$ct != $mt} {
|
||
incr fails
|
||
}
|
||
}
|
||
if {$fails > 0} {
|
||
fail "MI and console have same threads ($name)"
|
||
|
||
# Send a list of failures to the log
|
||
send_log "Console has thread ids: $console_thread_list\n"
|
||
send_log "MI has thread ids: $mi_thread_list\n"
|
||
} else {
|
||
pass "MI and console have same threads ($name)"
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
# Download shared libraries to the target.
|
||
proc mi_load_shlibs { args } {
|
||
foreach file $args {
|
||
gdb_remote_download target [shlib_target_file $file]
|
||
}
|
||
|
||
if {[is_remote target]} {
|
||
# If the target is remote, we need to tell gdb where to find the
|
||
# libraries.
|
||
#
|
||
# We could set this even when not testing remotely, but a user
|
||
# generally won't set it unless necessary. In order to make the tests
|
||
# more like the real-life scenarios, we don't set it for local testing.
|
||
mi_gdb_test "set solib-search-path [file dirname [lindex $args 0]]" "\^done" ""
|
||
}
|
||
}
|
||
|
||
proc mi_check_thread_states { states test } {
|
||
global expect_out
|
||
set pattern ".*\\^done,threads=\\\["
|
||
foreach s $states {
|
||
set pattern "${pattern}(.*)state=\"$s\""
|
||
}
|
||
set pattern "${pattern}(,core=\"\[0-9\]*\")?\\\}\\\].*"
|
||
|
||
verbose -log "expecting: $pattern"
|
||
mi_gdb_test "-thread-info" $pattern $test
|
||
}
|
||
|
||
# Return a list of MI features supported by this gdb.
|
||
proc mi_get_features {} {
|
||
global expect_out mi_gdb_prompt
|
||
|
||
send_gdb "-list-features\n"
|
||
|
||
gdb_expect {
|
||
-re "\\^done,features=\\\[(.*)\\\]\r\n$mi_gdb_prompt$" {
|
||
regsub -all -- \" $expect_out(1,string) "" features
|
||
return [split $features ,]
|
||
}
|
||
-re ".*\r\n$mi_gdb_prompt$" {
|
||
verbose -log "got $expect_out(buffer)"
|
||
return ""
|
||
}
|
||
timeout {
|
||
verbose -log "timeout in mi_gdb_prompt"
|
||
return ""
|
||
}
|
||
}
|
||
}
|
||
|
||
# Variable Object Trees
|
||
#
|
||
# Yet another way to check varobjs. Pass mi_walk_varobj_tree a "list" of
|
||
# variables (not unlike the actual source code definition), and it will
|
||
# automagically test the children for you (by default).
|
||
#
|
||
# Example:
|
||
#
|
||
# source code:
|
||
# struct bar {
|
||
# union {
|
||
# int integer;
|
||
# void *ptr;
|
||
# };
|
||
# const int *iPtr;
|
||
# };
|
||
#
|
||
# class foo {
|
||
# public:
|
||
# int a;
|
||
# struct {
|
||
# int b;
|
||
# struct bar *c;
|
||
# };
|
||
# };
|
||
#
|
||
# foo *f = new foo (); <-- break here
|
||
#
|
||
# We want to check all the children of "f".
|
||
#
|
||
# Translate the above structures into the following tree:
|
||
#
|
||
# set tree {
|
||
# foo f {
|
||
# {} public {
|
||
# int a {}
|
||
# anonymous struct {
|
||
# {} public {
|
||
# int b {}
|
||
# {bar *} c {
|
||
# {} public {
|
||
# anonymous union {
|
||
# {} public {
|
||
# int integer {}
|
||
# {void *} ptr {}
|
||
# }
|
||
# }
|
||
# {const int *} iPtr {
|
||
# {const int} {*iPtr} {}
|
||
# }
|
||
# }
|
||
# }
|
||
# }
|
||
# }
|
||
# }
|
||
# }
|
||
# }
|
||
#
|
||
# mi_walk_varobj_tree c++ $tree
|
||
#
|
||
# If you'd prefer to walk the tree using your own callback,
|
||
# simply pass the name of the callback to mi_walk_varobj_tree.
|
||
#
|
||
# This callback should take one argument, the name of the variable
|
||
# to process. This name is the name of a global array holding the
|
||
# variable's properties (object name, type, etc).
|
||
#
|
||
# An example callback:
|
||
#
|
||
# proc my_callback {var} {
|
||
# upvar #0 $var varobj
|
||
#
|
||
# puts "my_callback: called on varobj $varobj(obj_name)"
|
||
# }
|
||
#
|
||
# The arrays created for each variable object contain the following
|
||
# members:
|
||
#
|
||
# obj_name - the object name for accessing this variable via MI
|
||
# display_name - the display name for this variable (exp="display_name" in
|
||
# the output of -var-list-children)
|
||
# type - the type of this variable (type="type" in the output
|
||
# of -var-list-children, or the special tag "anonymous"
|
||
# path_expr - the "-var-info-path-expression" for this variable
|
||
# NOTE: This member cannot be used reliably with typedefs.
|
||
# Use with caution!
|
||
# See notes inside get_path_expr for more.
|
||
# parent - the variable name of the parent varobj
|
||
# children - a list of children variable names (which are the
|
||
# names Tcl arrays, not object names)
|
||
#
|
||
# For each variable object, an array containing the above fields will
|
||
# be created under the root node (conveniently called, "root"). For example,
|
||
# a variable object with handle "OBJ.public.0_anonymous.a" will have
|
||
# a corresponding global Tcl variable named "root.OBJ.public.0_anonymous.a".
|
||
#
|
||
# Note that right now, this mechanism cannot be used for recursive data
|
||
# structures like linked lists.
|
||
|
||
namespace eval ::varobj_tree {
|
||
# An index which is appended to root varobjs to ensure uniqueness.
|
||
variable _root_idx 0
|
||
|
||
# A procedure to help with debuggging varobj trees.
|
||
# VARIABLE_NAME is the name of the variable to dump.
|
||
# CMD, if present, is the name of the callback to output the contstructed
|
||
# strings. By default, it uses expect's "send_log" command.
|
||
# TERM, if present, is a terminating character. By default it is the newline.
|
||
#
|
||
# To output to the terminal (not the expect log), use
|
||
# mi_varobj_tree_dump_variable my_variable puts ""
|
||
|
||
proc mi_varobj_tree_dump_variable {variable_name {cmd send_log} {term "\n"}} {
|
||
upvar #0 $variable_name varobj
|
||
|
||
eval "$cmd \"VAR = $variable_name$term\""
|
||
|
||
# Explicitly encode the array indices, since outputting them
|
||
# in some logical order is better than what "array names" might
|
||
# return.
|
||
foreach idx {obj_name parent display_name type path_expr} {
|
||
eval "$cmd \"\t$idx = $varobj($idx)$term\""
|
||
}
|
||
|
||
# Output children
|
||
set num [llength $varobj(children)]
|
||
eval "$cmd \"\tnum_children = $num$term\""
|
||
if {$num > 0} {
|
||
eval "$cmd \"\tchildren = $varobj(children)$term\""
|
||
}
|
||
}
|
||
|
||
# The default callback used by mi_walk_varobj_tree. This callback
|
||
# simply checks all of VAR's children. It specifically does not test
|
||
# path expressions, since that is very problematic.
|
||
#
|
||
# This procedure may be used in custom callbacks.
|
||
proc test_children_callback {variable_name} {
|
||
upvar #0 $variable_name varobj
|
||
|
||
if {[llength $varobj(children)] > 0} {
|
||
# Construct the list of children the way mi_list_varobj_children
|
||
# expects to get it:
|
||
# { {obj_name display_name num_children type} ... }
|
||
set children_list {}
|
||
foreach child $varobj(children) {
|
||
upvar #0 $child c
|
||
set clist [list [string_to_regexp $c(obj_name)] \
|
||
[string_to_regexp $c(display_name)] \
|
||
[llength $c(children)]]
|
||
if {[string length $c(type)] > 0} {
|
||
lappend clist [string_to_regexp $c(type)]
|
||
}
|
||
lappend children_list $clist
|
||
}
|
||
|
||
mi_list_varobj_children $varobj(obj_name) $children_list \
|
||
"VT: list children of $varobj(obj_name)"
|
||
}
|
||
}
|
||
|
||
# Set the properties of the varobj represented by
|
||
# PARENT_VARIABLE - the name of the parent's variable
|
||
# OBJNAME - the MI object name of this variable
|
||
# DISP_NAME - the display name of this variable
|
||
# TYPE - the type of this variable
|
||
# PATH - the path expression for this variable
|
||
# CHILDREN - a list of the variable's children
|
||
proc create_varobj {parent_variable objname disp_name \
|
||
type path children} {
|
||
upvar #0 $parent_variable parent
|
||
|
||
set var_name "root.$objname"
|
||
global $var_name
|
||
array set $var_name [list obj_name $objname]
|
||
array set $var_name [list display_name $disp_name]
|
||
array set $var_name [list type $type]
|
||
array set $var_name [list path_expr $path]
|
||
array set $var_name [list parent "$parent_variable"]
|
||
array set $var_name [list children \
|
||
[get_tree_children $var_name $children]]
|
||
return $var_name
|
||
}
|
||
|
||
# Should VARIABLE be used in path expressions? The CPLUS_FAKE_CHILD
|
||
# varobjs and anonymous structs/unions are not used for path expressions.
|
||
proc is_path_expr_parent {variable} {
|
||
upvar #0 $variable varobj
|
||
|
||
# If the varobj's type is "", it is a CPLUS_FAKE_CHILD.
|
||
# If the tail of the varobj's object name is "%d_anonymous",
|
||
# then it represents an anonymous struct or union.
|
||
if {[string length $varobj(type)] == 0 \
|
||
|| [regexp {[0-9]+_anonymous$} $varobj(obj_name)]} {
|
||
return false
|
||
}
|
||
|
||
return true
|
||
}
|
||
|
||
# Return the path expression for the variable named NAME in
|
||
# parent varobj whose variable name is given by PARENT_VARIABLE.
|
||
proc get_path_expr {parent_variable name type} {
|
||
upvar #0 $parent_variable parent
|
||
upvar #0 $parent_variable path_parent
|
||
|
||
# If TYPE is "", this is one of the CPLUS_FAKE_CHILD varobjs,
|
||
# which has no path expression. Likewsise for anonymous structs
|
||
# and unions.
|
||
if {[string length $type] == 0 \
|
||
|| [string compare $type "anonymous"] == 0} {
|
||
return ""
|
||
}
|
||
|
||
# Find the path parent variable.
|
||
while {![is_path_expr_parent $parent_variable]} {
|
||
set parent_variable $path_parent(parent)
|
||
upvar #0 $parent_variable path_parent
|
||
}
|
||
|
||
# This is where things get difficult. We do not actually know
|
||
# the real type for variables defined via typedefs, so we don't actually
|
||
# know whether the parent is a structure/union or not.
|
||
#
|
||
# So we assume everything that isn't a simple type is a compound type.
|
||
set stars ""
|
||
regexp {\*+} $parent(type) stars
|
||
set is_compound 1
|
||
if {[string index $name 0] == "*"} {
|
||
set is_compound 0
|
||
}
|
||
|
||
if {[string index $parent(type) end] == "\]"} {
|
||
# Parent is an array.
|
||
return "($path_parent(path_expr))\[$name\]"
|
||
} elseif {$is_compound} {
|
||
# Parent is a structure or union or a pointer to one.
|
||
if {[string length $stars]} {
|
||
set join "->"
|
||
} else {
|
||
set join "."
|
||
}
|
||
|
||
global root
|
||
|
||
# To make matters even more hideous, varobj.c has slightly different
|
||
# path expressions for C and C++.
|
||
set path_expr "($path_parent(path_expr))$join$name"
|
||
if {[string compare -nocase $root(language) "c"] == 0} {
|
||
return $path_expr
|
||
} else {
|
||
return "($path_expr)"
|
||
}
|
||
} else {
|
||
# Parent is a pointer.
|
||
return "*($path_parent(path_expr))"
|
||
}
|
||
}
|
||
|
||
# Process the CHILDREN (a list of varobj_tree elements) of the variable
|
||
# given by PARENT_VARIABLE. Returns a list of children variables.
|
||
proc get_tree_children {parent_variable children} {
|
||
upvar #0 $parent_variable parent
|
||
|
||
set field_idx 0
|
||
set children_list {}
|
||
foreach {type name children} $children {
|
||
if {[string compare $parent_variable "root"] == 0} {
|
||
# Root variable
|
||
variable _root_idx
|
||
incr _root_idx
|
||
set objname "$name$_root_idx"
|
||
set disp_name "$name"
|
||
set path_expr "$name"
|
||
} elseif {[string compare $type "anonymous"] == 0} {
|
||
# Special case: anonymous types. In this case, NAME will either be
|
||
# "struct" or "union".
|
||
set objname "$parent(obj_name).${field_idx}_anonymous"
|
||
set disp_name "<anonymous $name>"
|
||
set path_expr ""
|
||
set type "$name {...}"
|
||
} else {
|
||
set objname "$parent(obj_name).$name"
|
||
set disp_name $name
|
||
set path_expr [get_path_expr $parent_variable $name $type]
|
||
}
|
||
|
||
lappend children_list [create_varobj $parent_variable $objname \
|
||
$disp_name $type $path_expr $children]
|
||
incr field_idx
|
||
}
|
||
|
||
return $children_list
|
||
}
|
||
|
||
# The main procedure to call the given CALLBACK on the elements of the
|
||
# given varobj TREE. See detailed explanation above.
|
||
proc walk_tree {language tree callback} {
|
||
global root
|
||
variable _root_idx
|
||
|
||
if {[llength $tree] < 3} {
|
||
error "tree does not contain enough elements"
|
||
}
|
||
|
||
set _root_idx 0
|
||
|
||
# Create root node and process the tree.
|
||
array set root [list language $language]
|
||
array set root [list obj_name "root"]
|
||
array set root [list display_name "root"]
|
||
array set root [list type "root"]
|
||
array set root [list path_expr "root"]
|
||
array set root [list parent "root"]
|
||
array set root [list children [get_tree_children root $tree]]
|
||
|
||
# Walk the tree
|
||
set all_nodes $root(children); # a stack of nodes
|
||
while {[llength $all_nodes] > 0} {
|
||
# "Pop" the name of the global variable containing this varobj's
|
||
# information from the stack of nodes.
|
||
set var_name [lindex $all_nodes 0]
|
||
set all_nodes [lreplace $all_nodes 0 0]
|
||
|
||
# Bring the global named in VAR_NAME into scope as the local variable
|
||
# VAROBJ.
|
||
upvar #0 $var_name varobj
|
||
|
||
# Append any children of VAROBJ to the list of nodes to walk.
|
||
if {[llength $varobj(children)] > 0} {
|
||
set all_nodes [concat $all_nodes $varobj(children)]
|
||
}
|
||
|
||
# If this is a root variable, create the variable object for it.
|
||
if {[string compare $varobj(parent) "root"] == 0} {
|
||
mi_create_varobj $varobj(obj_name) $varobj(display_name) \
|
||
"VT: create root varobj for $varobj(display_name)"
|
||
}
|
||
|
||
# Now call the callback for VAROBJ.
|
||
uplevel #0 $callback $var_name
|
||
}
|
||
}
|
||
}
|
||
|
||
# The default varobj tree callback, which simply tests -var-list-children.
|
||
proc mi_varobj_tree_test_children_callback {variable} {
|
||
::varobj_tree::test_children_callback $variable
|
||
}
|
||
|
||
# Walk the variable object tree given by TREE, calling the specified
|
||
# CALLBACK. By default this uses mi_varobj_tree_test_children_callback.
|
||
proc mi_walk_varobj_tree {language tree \
|
||
{callback \
|
||
mi_varobj_tree_test_children_callback}} {
|
||
::varobj_tree::walk_tree $language $tree $callback
|
||
}
|
||
|
||
# Build a list of key-value pairs given by the list ATTR_LIST. Flatten
|
||
# this list using the optional JOINER, a comma by default.
|
||
#
|
||
# The list must contain an even number of elements, which are the key-value
|
||
# pairs. Each value will be surrounded by quotes, according to the grammar,
|
||
# except if the value starts with \[ or \{, when the quotes will be omitted.
|
||
#
|
||
# Example: mi_build_kv_pairs {a b c d e f g \[.*\]}
|
||
# returns a=\"b\",c=\"d\",e=\"f\",g=\[.*\]
|
||
proc mi_build_kv_pairs {attr_list {joiner ,}} {
|
||
set l {}
|
||
foreach {var value} $attr_list {
|
||
if {[string range $value 0 1] == "\\\["
|
||
|| [string range $value 0 1] == "\\\{"} {
|
||
lappend l "$var=$value"
|
||
} else {
|
||
lappend l "$var=\"$value\""
|
||
}
|
||
}
|
||
return "[join $l $joiner]"
|
||
}
|
||
|
||
# Construct a breakpoint location regexp. This may be used along with
|
||
# mi_make_breakpoint_multi to test the output of -break-insert,
|
||
# -dprintf-insert, or -break-info with breapoints with multiple
|
||
# locations.
|
||
#
|
||
# All arguments for the breakpoint location may be specified using the
|
||
# options number, enabled, addr, func, file, fullname, line and
|
||
# thread-groups.
|
||
#
|
||
# Example: mi_make_breakpoint_loc -number 2.1 -file ".*/myfile.c" -line 3
|
||
# will return the breakpoint location:
|
||
# {number="2.1",enabled=".*",addr=".*",func=".*",
|
||
# file=".*/myfile.c",fullname=".*",line="3",thread-groups=\[.*\]}
|
||
|
||
proc mi_make_breakpoint_loc {args} {
|
||
parse_args {{number .*} {enabled .*} {addr .*}
|
||
{func .*} {file .*} {fullname .*} {line .*}
|
||
{thread-groups \\\[.*\\\]}}
|
||
|
||
set attr_list {}
|
||
foreach attr [list number enabled addr func file \
|
||
fullname line thread-groups] {
|
||
lappend attr_list $attr [set $attr]
|
||
}
|
||
|
||
return "{[mi_build_kv_pairs $attr_list]}"
|
||
}
|
||
|
||
# Bits shared between mi_make_breakpoint and mi_make_breakpoint_multi.
|
||
|
||
proc mi_make_breakpoint_1 {attr_list cond evaluated-by times \
|
||
ignore script original-location} {
|
||
set result "bkpt=\\\{[mi_build_kv_pairs $attr_list]"
|
||
|
||
# There are always exceptions.
|
||
|
||
# If COND is not preset, do not output it.
|
||
if {[string length $cond] > 0} {
|
||
append result ","
|
||
append result [mi_build_kv_pairs [list "cond" $cond]]
|
||
|
||
# When running on a remote, GDB may output who is evaluating
|
||
# breakpoint conditions.
|
||
if {[string length ${evaluated-by}] > 0} {
|
||
append result [mi_build_kv_pairs \
|
||
[list "evaluated-by" ${evaluated-by}]]
|
||
} else {
|
||
append result {(,evaluated-by=".*")?}
|
||
}
|
||
}
|
||
|
||
append result ","
|
||
append result [mi_build_kv_pairs [list "times" $times]]
|
||
|
||
# If SCRIPT and IGNORE are not present, do not output them.
|
||
if {$ignore != 0} {
|
||
append result ","
|
||
append result [mi_build_kv_pairs [list "ignore" $ignore]]
|
||
append result ","
|
||
}
|
||
if {[string length $script] > 0} {
|
||
append result ","
|
||
append result [mi_build_kv_pairs [list "script" $script]]
|
||
append result ","
|
||
} else {
|
||
# Allow anything up until the next "official"/required attribute.
|
||
# This pattern skips over script/ignore if matches on those
|
||
# were not specifically required by the caller.
|
||
append result ".*"
|
||
}
|
||
append result [mi_build_kv_pairs \
|
||
[list "original-location" ${original-location}]]
|
||
|
||
return $result
|
||
}
|
||
|
||
|
||
# Construct a breakpoint regexp, for a breakpoint with multiple
|
||
# locations. This may be used to test the output of -break-insert,
|
||
# -dprintf-insert, or -break-info with breakpoints with multiple
|
||
# locations.
|
||
#
|
||
# All arguments for the breakpoint may be specified using the options
|
||
# number, type, disp, enabled, func, cond, evaluated-by, times,
|
||
# ignore, script and locations.
|
||
#
|
||
# Only if -script and -ignore are given will they appear in the output.
|
||
# Otherwise, this procedure will skip them using ".*".
|
||
#
|
||
# Example: mi_make_breakpoint_multi -number 2 -locations "$loc"
|
||
# will return the breakpoint:
|
||
# bkpt={number="2",type=".*",disp=".*",enabled=".*",addr="<MULTIPLE>",
|
||
# times="0".*original-location=".*",locations=$loc}
|
||
#
|
||
# You can construct the list of locations with mi_make_breakpoint_loc.
|
||
|
||
proc mi_make_breakpoint_multi {args} {
|
||
parse_args {{number .*} {type .*} {disp .*} {enabled .*}
|
||
{times .*} {ignore 0}
|
||
{script ""} {original-location .*} {cond ""} {evaluated-by ""}
|
||
{locations .*}}
|
||
|
||
set attr_list {}
|
||
foreach attr [list number type disp enabled] {
|
||
lappend attr_list $attr [set $attr]
|
||
}
|
||
|
||
lappend attr_list "addr" "<MULTIPLE>"
|
||
|
||
set result [mi_make_breakpoint_1 \
|
||
$attr_list $cond ${evaluated-by} $times \
|
||
$ignore $script ${original-location}]
|
||
|
||
append result ","
|
||
append result [mi_build_kv_pairs [list "locations" $locations]]
|
||
|
||
append result "\\\}"
|
||
return $result
|
||
}
|
||
|
||
# Construct a breakpoint regexp. This may be used to test the output of
|
||
# -break-insert, -dprintf-insert, or -break-info.
|
||
#
|
||
# All arguments for the breakpoint may be specified using the options
|
||
# number, type, disp, enabled, addr, func, file, fullanme, line,
|
||
# thread-groups, cond, evaluated-by, times, ignore, script,
|
||
# and original-location.
|
||
#
|
||
# Only if -script and -ignore are given will they appear in the output.
|
||
# Otherwise, this procedure will skip them using ".*".
|
||
#
|
||
# Example: mi_make_breakpoint -number 2 -file ".*/myfile.c" -line 3
|
||
# will return the breakpoint:
|
||
# bkpt={number="2",type=".*",disp=".*",enabled=".*",addr=".*",func=".*",
|
||
# file=".*/myfile.c",fullname=".*",line="3",thread-groups=\[.*\],
|
||
# times="0".*original-location=".*"}
|
||
|
||
proc mi_make_breakpoint {args} {
|
||
parse_args {{number .*} {type .*} {disp .*} {enabled .*} {addr .*}
|
||
{func .*} {file .*} {fullname .*} {line .*}
|
||
{thread-groups \\\[.*\\\]} {times .*} {ignore 0}
|
||
{script ""} {original-location .*} {cond ""} {evaluated-by ""}}
|
||
|
||
set attr_list {}
|
||
foreach attr [list number type disp enabled addr func file \
|
||
fullname line thread-groups] {
|
||
lappend attr_list $attr [set $attr]
|
||
}
|
||
|
||
set result [mi_make_breakpoint_1 \
|
||
$attr_list $cond ${evaluated-by} $times \
|
||
$ignore $script ${original-location}]
|
||
|
||
append result "\\\}"
|
||
return $result
|
||
}
|
||
|
||
# Build a breakpoint table regexp given the list of breakpoints in `bp_list',
|
||
# constructed by mi_make_breakpoint.
|
||
#
|
||
# Example: Construct a breakpoint table where the only attributes we
|
||
# test for are the existence of three breakpoints numbered 1, 2, and 3.
|
||
#
|
||
# set bps {}
|
||
# lappend bps [mi_make_breakpoint -number 1]
|
||
# lappend bps [mi_make_breakpoint -number 2]
|
||
# lappned bps [mi_make_breakpoint -number 3]
|
||
# mi_make_breakpoint_table $bps
|
||
# will return (abbreviated for clarity):
|
||
# BreakpointTable={nr_rows="3",nr_cols="6",hdr=[{width=".*",...} ...],
|
||
# body=[bkpt={number="1",...},bkpt={number="2",...},bkpt={number="3",...}]}
|
||
|
||
proc mi_make_breakpoint_table {bp_list} {
|
||
# Build header -- assume a standard header for all breakpoint tables.
|
||
set hl {}
|
||
foreach {nm hdr} [list number Num type Type disp Disp enabled Enb \
|
||
addr Address what What] {
|
||
# The elements here are the MI table headers, which have the
|
||
# format:
|
||
# {width="7",alignment="-1",col_name="number",colhdr="Num"}
|
||
lappend hl "{[mi_build_kv_pairs [list width .* alignment .* \
|
||
col_name $nm colhdr $hdr]]}"
|
||
}
|
||
set header "hdr=\\\[[join $hl ,]\\\]"
|
||
|
||
# The caller has implicitly supplied the number of columns and rows.
|
||
set nc [llength $hl]
|
||
set nr [llength $bp_list]
|
||
|
||
# Build body -- mi_make_breakpoint has done most of the work.
|
||
set body "body=\\\[[join $bp_list ,]\\\]"
|
||
|
||
# Assemble the final regexp.
|
||
return "BreakpointTable={nr_rows=\"$nr\",nr_cols=\"$nc\",$header,$body}"
|
||
}
|
||
|
||
# Return a 1 for configurations that do not support Python scripting.
|
||
# Note: This also sets various globals that specify which version of Python
|
||
# is in use. See skip_python_tests_prompt.
|
||
|
||
proc mi_skip_python_tests {} {
|
||
global mi_gdb_prompt
|
||
return [skip_python_tests_prompt "$mi_gdb_prompt$"]
|
||
}
|
||
|
||
# As skip_libstdcxx_probe_tests_prompt, with mi_gdb_prompt.
|
||
|
||
proc mi_skip_libstdcxx_probe_tests {} {
|
||
global mi_gdb_prompt
|
||
return [skip_libstdcxx_probe_tests_prompt "$mi_gdb_prompt$"]
|
||
}
|
||
|
||
# Check whether we're testing with the remote or extended-remote
|
||
# targets.
|
||
|
||
proc mi_is_target_remote {} {
|
||
global mi_gdb_prompt
|
||
|
||
return [gdb_is_target_remote_prompt "$mi_gdb_prompt"]
|
||
}
|