mirror/binutils-gdb
2
0
Fork 0
mirror of https://sourceware.org/git/binutils-gdb.git synced 2024-12-15 04:31:49 +08:00
Code Issues Packages Projects Releases Wiki Activity
83c6908ca2
binutils-gdb/Makefile.in
Ken Raeburn 2492f942fc * Makefile.in (DEVO_SUPPORT): Remove configure.bat and makeall.bat, they're 
only useful for binutils snapshots.
(binutils.tar.gz, gas+binutils.tar.gz): Add configure.bat and makeall.bat to
specified SUPPORT_FILES.
1994-11-08 02:04:00 +00:00

1171 lines
32 KiB
Makefile
Raw Blame History

#
# Makefile for directory with subdirs to build.
# Copyright (C) 1990, 1991, 1992, 1993 Free Software Foundation
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
#
srcdir = .
prefix = /usr/local
exec_prefix = $(prefix)
bindir = $(exec_prefix)/bin
libdir = $(exec_prefix)/lib
tooldir = $(exec_prefix)/$(target)
program_transform_name =
datadir = $(prefix)/lib
mandir = $(prefix)/man
man1dir = $(mandir)/man1
man2dir = $(mandir)/man2
man3dir = $(mandir)/man3
man4dir = $(mandir)/man4
man5dir = $(mandir)/man5
man6dir = $(mandir)/man6
man7dir = $(mandir)/man7
man8dir = $(mandir)/man8
man9dir = $(mandir)/man9
infodir = $(prefix)/info
includedir = $(prefix)/include
docdir = $(datadir)/doc
SHELL = /bin/sh
INSTALL = $${srcroot}/install.sh -c
INSTALL_PROGRAM = $(INSTALL)
INSTALL_DATA = $(INSTALL) -m 644
INSTALL_XFORM = $(INSTALL) -t='$(program_transform_name)'
INSTALL_DOSREL = install-dosrel-fake
AS = as
AR = ar
AR_FLAGS = rc
CC = cc
# Special variables passed down in EXTRA_GCC_FLAGS. They are defined
# here so that they can be overridden by Makefile fragments.
HOST_CC = $(CC_FOR_BUILD)
HOST_PREFIX =
HOST_PREFIX_1 = loser-
# We don't specify -g -O because many compilers don't support -g -O,
# and/or -O is broken in and of itself.
CFLAGS = -g
# start-sanitize-chill
CHILLFLAGS = $(CFLAGS)
CHILL_LIB = -lchill
# end-sanitize-chill
CXX = gcc
# Use -O2 to stress test the compiler.
CXXFLAGS = -g -O2 -fno-implicit-templates
RANLIB = ranlib
NM = nm
# Not plain GZIP, since gzip looks there for extra command-line options.
GZIPPROG = gzip
# BISON: This line sed'ed to BISON = bison -y for FSF releases, don't remove.
BISON = `if [ -f $$r/byacc/byacc ] ; \
then echo $$r/byacc/byacc ; \
else echo byacc ; \
fi`
LEX = `if [ -f $$r/flex/flex ] ; \
then echo $$r/flex/flex ; \
else echo flex ; fi`
M4 = `if [ -f $$r/m4/m4 ] ; \
then echo $$r/m4/m4 ; \
else echo m4 ; fi`
MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \
then echo $$r/texinfo/makeinfo/makeinfo ; \
else echo makeinfo ; fi`
# This just becomes part of the MAKEINFO definition passed down to
# sub-makes. It lets flags be given on the command line while still
# using the makeinfo from the object tree.
MAKEINFOFLAGS =
EXPECT = `if [ -f $$r/expect/expect ] ; \
then echo $$r/expect/expect ; \
else echo expect ; fi`
RUNTEST = `if [ -f $${srcroot}/dejagnu/runtest ] ; \
then echo $${srcroot}/dejagnu/runtest ; \
else echo runtest ; fi`
# libraries that may need to be augmented on a system-by-system basis
X11_LIB = -lX11
# compilers to use to create programs which must be run in the build
# environment.
CC_FOR_BUILD = $(CC)
CXX_FOR_BUILD = $(CXX)
SUBDIRS = "this is set via configure, don't edit this"
OTHERS =
ALL = all.normal
INSTALL_TARGET = install-dirs \
$(INSTALL_MODULES) \
$(INSTALL_TARGET_MODULES) \
$(INSTALL_X11_MODULES) \
install-gcc \
$(INSTALL_DOSREL)
CC_FOR_TARGET = ` \
if [ -f $$r/gcc/Makefile ] ; then \
if [ -f $$r/newlib/Makefile ] ; then \
echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
else \
echo $$r/gcc/xgcc -B$$r/gcc/; \
fi; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CC); \
else \
t='$(program_transform_name)'; echo gcc | sed -e 's/brokensed/brokensed/' $$t; \
fi; \
fi`
# start-sanitize-chill
CHILL_FOR_TARGET = ` \
if [ -f $$r/gcc/Makefile ] ; then \
echo $$r/gcc/xgcc -B$$r/gcc/ -L$$r/chillrt/; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CC); \
else \
t='$(program_transform_name)'; echo gcc | sed -e 's/brokensed/brokensed/' $$t; \
fi; \
fi`
# end-sanitize-chill
CXX_FOR_TARGET = ` \
if [ -f $$r/gcc/Makefile ] ; then \
if [ -f $$r/newlib/Makefile ] ; then \
echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \
else \
echo $$r/gcc/xgcc -B$$r/gcc/; \
fi; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(CXX); \
else \
t='$(program_transform_name)'; echo gcc | sed -e 's/brokensed/brokensed/' $$t; \
fi; \
fi`
AS_FOR_TARGET = ` \
if [ -f $$r/gas/Makefile ] ; then \
echo $$r/gas/as.new ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(AS); \
else \
t='$(program_transform_name)'; echo as | sed -e 's/brokensed/brokensed/' $$t ; \
fi; \
fi`
AR_FOR_TARGET = ` \
if [ -f $$r/binutils/ar ] ; then \
echo $$r/binutils/ar ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(AR); \
else \
t='$(program_transform_name)'; echo ar | sed -e 's/brokensed/brokensed/' $$t ; \
fi; \
fi`
RANLIB_FOR_TARGET = ` \
if [ -f $$r/binutils/ranlib ] ; then \
echo $$r/binutils/ranlib ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(RANLIB); \
else \
t='$(program_transform_name)'; echo ranlib | sed -e 's/brokensed/brokensed/' $$t ; \
fi; \
fi`
NM_FOR_TARGET = ` \
if [ -f $$r/binutils/Makefile ] ; then \
echo $$r/binutils/nm.new ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(NM); \
else \
t='$(program_transform_name)'; echo nm | sed -e 's/brokensed/brokensed/' $$t ; \
fi; \
fi`
#### host and target specific makefile fragments come in here.
###
# Flags to pass down to all sub-makes.
# Please keep these in alphabetical order.
BASE_FLAGS_TO_PASS = \
"AR_FLAGS=$(AR_FLAGS)" \
"AR_FOR_TARGET=$(AR_FOR_TARGET)" \
"AS_FOR_TARGET=$(AS_FOR_TARGET)" \
"BISON=$(BISON)" \
"CC_FOR_BUILD=$(CC_FOR_BUILD)" \
"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
"CFLAGS=$(CFLAGS)" \
$(start-sanitize-chill)\
"CHILLFLAGS=$(CHILLFLAGS)" \
"CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
"CHILL_LIB=$(CHILL_LIB)" \
$(end-sanitize-chill)\
"CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
"CXXFLAGS=$(CXXFLAGS)" \
"CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
"GCC_FOR_TARGET=$(CC_FOR_TARGET)" \
"INSTALL=$(INSTALL)" \
"INSTALL_DATA=$(INSTALL_DATA)" \
"INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
"INSTALL_XFORM=$(INSTALL_XFORM)" \
"LDFLAGS=$(LDFLAGS)" \
"LEX=$(LEX)" \
"M4=$(M4)" \
"MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
"NM_FOR_TARGET=$(NM_FOR_TARGET)" \
"RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
"SHELL=$(SHELL)" \
"EXPECT=$(EXPECT)" \
"RUNTEST=$(RUNTEST)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)" \
"YACC=$(BISON)" \
"exec_prefix=$(exec_prefix)" \
"prefix=$(prefix)" \
"tooldir=$(tooldir)"
# Flags to pass down to most sub-makes, in which we're building with
# the host environment.
# If any variables are added here, they must be added to do-*, below.
EXTRA_HOST_FLAGS = \
'AR=$(AR)' \
'AS=$(AS)' \
'CC=$(CC)' \
'CXX=$(CXX)' \
'NM=$(NM)' \
'RANLIB=$(RANLIB)'
FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
# Flags that are concerned with the location of the X11 include files
# and library files
X11_FLAGS_TO_PASS = \
"X11_INCLUDE_FLAGS=$(X11_INCLUDE_FLAGS)" \
"X11_LIB_FLAGS=$(X11_LIB_FLAGS)" \
"X11_LIB=$(X11_LIB)"
# Flags to pass down to makes which are built with the target environment.
# The double $ decreases the length of the command line; the variables
# are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
# If any variables are added here, they must be added to do-*, below.
EXTRA_TARGET_FLAGS = \
'AR=$$(AR_FOR_TARGET)' \
'AS=$$(AS_FOR_TARGET)' \
'CC=$$(CC_FOR_TARGET)' \
'CXX=$$(CXX_FOR_TARGET)' \
'NM=$$(NM_FOR_TARGET)' \
'RANLIB=$$(RANLIB_FOR_TARGET)'
TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
# Flags to pass down to gcc. gcc builds a library, libgcc.a, so it
# unfortunately needs the native compiler and the target ar and
# ranlib.
# If any variables are added here, they must be added to do-*, below.
# The HOST_* variables are a special case, which are used for the gcc
# cross-building scheme.
EXTRA_GCC_FLAGS = \
'AR=$$(AR_FOR_TARGET)' \
'AS=$(AS)' \
'CC=$(CC)' \
'CXX=$(CXX)' \
'HOST_CC=$(CC_FOR_BUILD)' \
'HOST_PREFIX=$(HOST_PREFIX)' \
'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
'NM=$(NM)' \
'RANLIB=$$(RANLIB_FOR_TARGET)'
GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
# This is a list of the targets for all of the modules which are compiled
# using $(FLAGS_TO_PASS).
ALL_MODULES = \
all-autoconf \
all-bfd \
all-binutils \
all-byacc \
all-cvs \
all-dejagnu \
all-diff \
all-dosutils \
all-etc \
all-fileutils \
all-find \
all-flex \
all-gas \
all-gawk \
all-gdb \
all-gprof \
all-grep \
all-gzip \
all-hello \
all-indent \
all-ispell \
all-ld \
all-libiberty \
all-m4 \
all-make \
all-mmalloc \
all-opcodes \
all-pagas \
all-patch \
all-prms \
all-rcs \
all-readline \
all-release \
all-recode \
all-sed \
all-send-pr \
all-shellutils \
all-sim \
all-tar \
all-tcl \
all-texinfo \
all-textutils \
all-tgas \
all-time \
all-uudecode \
all-wdiff
# This is a list of the check targets for all of the modules which are
# compiled using $(FLAGS_TO_PASS).
# This is a list of the check targets for all of the modules which are
# compiled using $(FLAGS_TO_PASS).
#
# The list is in two parts. The first lists those tools which
# are tested as part of the host's native tool-chain, and not
# tested in a cross configuration.
NATIVE_CHECK_MODULES = \
check-byacc \
check-flex
CROSS_CHECK_MODULES = \
check-autoconf \
check-bfd \
check-binutils \
check-cvs \
check-dejagnu \
check-diff \
check-etc \
check-fileutils \
check-find \
check-gas \
check-gawk \
check-gdb \
check-gprof \
check-grep \
check-gzip \
check-hello \
check-indent \
check-ispell \
check-ld \
check-libiberty \
check-m4 \
check-make \
check-mmcheckoc \
check-opcodes \
check-pagas \
check-patch \
check-prms \
check-rcs \
check-readline \
check-recode \
check-sed \
check-send-pr \
check-shellutils \
check-sim \
check-tar \
check-tcl \
check-texinfo \
check-textutils \
check-tgas \
check-time \
check-uudecode \
check-wdiff
CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
# This is a list of the install targets for all of the modules which are
# compiled using $(FLAGS_TO_PASS).
INSTALL_MODULES = \
install-autoconf \
install-bfd \
install-binutils \
install-byacc \
install-cvs \
install-dejagnu \
install-diff \
install-dosutils \
install-etc \
install-fileutils \
install-find \
install-flex \
install-gas \
install-gawk \
install-gdb \
install-glob \
install-gprof \
install-grep \
install-gzip \
install-hello \
install-indent \
install-ispell \
install-ld \
install-libiberty \
install-m4 \
install-make \
install-mmalloc \
install-opcodes \
install-pagas \
install-patch \
install-prms \
install-rcs \
install-readline \
install-recode \
install-sed \
install-send-pr \
install-shellutils \
install-sim \
install-tar \
install-tcl \
install-texinfo \
install-textutils \
install-tgas \
install-time \
install-uudecode \
install-wdiff
# This is a list of the targets for all of the modules which are compiled
# using $(X11_FLAGS_TO_PASS).
ALL_X11_MODULES = \
all-emacs \
all-emacs19 \
all-expect \
all-gash \
all-tclX \
all-tk
# This is a list of the check targets for all of the modules which are
# compiled using $(X11_FLAGS_TO_PASS).
CHECK_X11_MODULES = \
check-emacs \
check-expect \
check-gash \
check-tclX \
check-tk
# This is a list of the install targets for all the modules which are
# compiled using $(X11_FLAGS_TO_PASS).
INSTALL_X11_MODULES = \
install-emacs \
install-emacs19 \
install-expect \
install-gash \
install-tclX \
install-tk
# This is a list of the targets for all of the modules which are compiled
# using $(TARGET_FLAGS_TO_PASS).
ALL_TARGET_MODULES = \
$(start-sanitize-chill) \
all-chillrt \
$(end-sanitize-chill) \
all-libio \
all-libstdc++ \
all-librx \
all-libg++ \
all-newlib \
all-libgloss \
all-xiberty
# This is a list of the check targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
CHECK_TARGET_MODULES = \
$(start-sanitize-chill) \
check-chillrt \
$(end-sanitize-chill) \
check-libio \
check-libstdc++ \
check-libg++ \
check-newlib \
check-xiberty
# This is a list of the install targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
INSTALL_TARGET_MODULES = \
$(start-sanitize-chill) \
install-chillrt \
$(end-sanitize-chill) \
install-libio \
install-libstdc++ \
install-libg++ \
install-newlib \
install-libgloss \
install-xiberty
# This is a shell case of all modules which are compiled using
# $(TARGET_FLAGS_TO_PASS), used in the do-X rule.
TARGET_LIBS = libio | libstdc++ | librx | libg++ | newlib | xiberty
# start-sanitize-chill
TARGET_LIBS = chillrt | libio | libstdc++ | librx | libg++ | newlib | xiberty
# end-sanitize-chill
# The first rule in the file had better be this one. Don't put any above it.
all: all.normal
.PHONY: all
# The target built for a native build.
.PHONY: all.normal
all.normal: \
$(ALL_MODULES) \
$(ALL_TARGET_MODULES) \
$(ALL_X11_MODULES) \
all-gcc
# Do a target for all the subdirectories. A ``make do-X'' will do a
# ``make X'' in all subdirectories (because, in general, there is a
# dependency (below) of X upon do-X, a ``make X'' will also do this,
# but it may do additional work as well).
# This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
# because it is so large that it can easily overflow the command line
# length limit on some systems.
DO_X = \
do-clean \
do-distclean \
do-dvi \
do-info \
do-install-info \
do-installcheck \
do-mostlyclean \
do-realclean \
do-TAGS
.PHONY: $(DO_X)
$(DO_X):
@target=`echo $@ | sed -e 's/^do-//'`; \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
for i in $(SUBDIRS); do \
if [ -f ./$$i/Makefile ]; then \
case $$i in \
$(TARGET_LIBS) ) \
for flag in $(EXTRA_TARGET_FLAGS); do \
eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
done; \
;; \
gcc) \
for flag in $(EXTRA_GCC_FLAGS); do \
eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
done; \
;; \
*) \
for flag in $(EXTRA_HOST_FLAGS); do \
eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
done; \
;; \
esac ; \
export AR AS CC CXX NM RANLIB; \
if (cd ./$$i; \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
"RANLIB=$${RANLIB}" \
$${target}); \
then true; else exit 1; fi; \
else true; fi; \
done
# Here are the targets which correspond to the do-X targets.
.PHONY: info installcheck dvi install-info
.PHONY: clean distclean mostlyclean realclean local-clean local-distclean
info: do-info
installcheck: do-installcheck
dvi: do-dvi
install-info: do-install-info dir.info
srcroot=`cd $(srcdir); pwd`; export srcroot; \
if [ -f dir.info ] ; then \
$(INSTALL_DATA) dir.info $(infodir)/dir.info ; \
else true ; fi
local-clean:
-rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E
local-distclean:
-rm -f Makefile config.status
clean: do-clean local-clean
mostlyclean: do-mostlyclean local-clean
distclean: do-distclean local-clean local-distclean
realclean: do-realclean local-clean local-distclean
# Check target.
.PHONY: check
check: $(CHECK_MODULES) \
$(CHECK_TARGET_MODULES) \
$(CHECK_X11_MODULES) \
check-gcc
# Installation targets.
.PHONY: install uninstall vault-install
install: $(INSTALL_TARGET)
uninstall:
@echo "the uninstall target is not supported in this tree"
vault-install:
@if [ -f ./release/vault-install ] ; then \
./release/vault-install $(host_alias) $(target_alias) ; \
else \
true ; \
fi
.PHONY: install.all
install.all: install-no-fixedincludes
@if [ -f ./gcc/Makefile ] ; then \
r=`pwd` ; export r ; \
(cd ./gcc; \
$(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
else \
true ; \
fi
# install-no-fixedincludes is used because Cygnus can not distribute
# the fixed header files.
.PHONY: install-no-fixedincludes
install-no-fixedincludes: \
install-dirs \
$(INSTALL_MODULES) \
$(INSTALL_TARGET_MODULES) \
$(INSTALL_X11_MODULES) \
gcc-no-fixedincludes
# Install the gcc headers files, but not the fixed include files,
# which Cygnus is not allowed to distribute. This rule is very
# dependent on the workings of the gcc Makefile.in.
.PHONY: gcc-no-fixedincludes
gcc-no-fixedincludes:
@if [ -f ./gcc/Makefile ]; then \
rm -rf gcc/tmp-include; \
mv gcc/include gcc/tmp-include 2>/dev/null; \
mkdir gcc/include; \
cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \
touch gcc/stmp-fixinc gcc/include/fixed; \
rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd` ; export srcroot; \
(cd ./gcc; \
$(MAKE) $(GCC_FLAGS_TO_PASS) install); \
rm -rf gcc/include; \
mv gcc/tmp-include gcc/include 2>/dev/null; \
else true; fi
# This rule is used to build the modules which use FLAGS_TO_PASS. To
# build a target all-X means to cd to X and make all.
# all-glob is handled specially because it doesn't actually build.
#
# all-gui, and all-libproc are handled specially because
# they are still experimental, and if they fail to build, that
# shouldn't stop "make all".
.PHONY: $(ALL_MODULES) all-glob all-gui all-libproc
$(ALL_MODULES) all-glob all-gui all-libproc:
@dir=`echo $@ | sed -e 's/all-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
(cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
else \
true; \
fi
# These rules are used to check the modules which use FLAGS_TO_PASS.
# To build a target check-X means to cd to X and make check. Some
# modules are only tested in a native toolchain.
.PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
$(NATIVE_CHECK_MODULES):
@if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
dir=`echo $@ | sed -e 's/check-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
(cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
else \
true; \
fi; \
fi
$(CROSS_CHECK_MODULES):
@dir=`echo $@ | sed -e 's/check-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
(cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
else \
true; \
fi
# This rule is used to install the modules which use FLAGS_TO_PASS.
# To build a target install-X means to cd to X and make install.
.PHONY: $(INSTALL_MODULES)
$(INSTALL_MODULES): install-dirs
@dir=`echo $@ | sed -e 's/install-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
(cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
else \
true; \
fi
# This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
# To build a target all-X means to cd to X and make all.
.PHONY: $(ALL_TARGET_MODULES)
$(ALL_TARGET_MODULES):
@dir=`echo $@ | sed -e 's/all-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
(cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
else \
true; \
fi
# This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
# To build a target install-X means to cd to X and make install.
.PHONY: $(CHECK_TARGET_MODULES)
$(CHECK_TARGET_MODULES):
@dir=`echo $@ | sed -e 's/check-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
(cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) check); \
else \
true; \
fi
# This rule is used to install the modules which use
# TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X
# and make install.
.PHONY: $(INSTALL_TARGET_MODULES)
$(INSTALL_TARGET_MODULES): install-dirs
@dir=`echo $@ | sed -e 's/install-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
(cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
else \
true; \
fi
# This rule is used to build the modules which use X11_FLAGS_TO_PASS.
# To build a target all-X means to cd to X and make all.
.PHONY: $(ALL_X11_MODULES)
$(ALL_X11_MODULES):
@dir=`echo $@ | sed -e 's/all-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
(cd $${dir}; \
$(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all); \
else \
true; \
fi
# This rule is used to check the modules which use X11_FLAGS_TO_PASS.
# To build a target check-X means to cd to X and make all.
.PHONY: $(CHECK_X11_MODULES)
$(CHECK_X11_MODULES):
@dir=`echo $@ | sed -e 's/check-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
(cd $${dir}; \
$(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check); \
else \
true; \
fi
# This rule is used to install the modules which use X11_FLAGS_TO_PASS.
# To build a target install-X means to cd to X and make install.
.PHONY: $(INSTALL_X11_MODULES)
$(INSTALL_X11_MODULES):
@dir=`echo $@ | sed -e 's/install-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
(cd $${dir}; \
$(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install); \
else \
true; \
fi
# gcc is the only module which uses GCC_FLAGS_TO_PASS.
.PHONY: all-gcc
all-gcc:
@if [ -f ./gcc/Makefile ] ; then \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
(cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
else \
true; \
fi
.PHONY: check-gcc
check-gcc:
@if [ -f ./gcc/Makefile ] ; then \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
(cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
else \
true; \
fi
.PHONY: install-gcc
install-gcc:
@if [ -f ./gcc/Makefile ] ; then \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
(cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
else \
true; \
fi
# EXPERIMENTAL STUFF
# This rule is used to install the modules which use FLAGS_TO_PASS.
# To build a target install-X means to cd to X and make install.
.PHONY: install-dosrel
install-dosrel: install-dirs info
@dir=`echo $@ | sed -e 's/install-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`pwd`; export r; \
srcroot=`cd $(srcdir); pwd`; export srcroot; \
(cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
else \
true; \
fi
install-dosrel-fake:
# This is a list of inter-dependencies among modules.
all-autoconf: all-m4
all-bfd:
all-binutils: all-libiberty all-opcodes all-bfd all-flex all-byacc
all-byacc:
# start-sanitize-chill
all-chillrt: all-binutils all-gas all-gcc all-newlib
# end-sanitize-chill
all-cvs:
all-dejagnu: all-tcl all-expect all-tk
all-diff: all-libiberty
all-emacs:
all-emacs19: all-byacc
all-etc:
all-expect: all-tcl all-tk
all-fileutils: all-libiberty
all-find:
all-flex: all-libiberty all-byacc
all-gas: all-libiberty all-opcodes all-bfd
all-gash: all-tcl
all-gawk:
all-gcc: all-libiberty all-byacc all-binutils all-gas all-pagas
all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-glob all-byacc all-sim all-gcc all-ld
all-glob:
all-gprof: all-libiberty all-bfd
all-grep: all-libiberty
all-gui: all-gdb all-libproc all-librx
all-gzip: all-libiberty
all-hello: all-libiberty
all-indent:
all-ispell: all-emacs # all-emacs19 ??? is this needed?
all-ld: all-libiberty all-bfd all-byacc all-flex
all-libg++: all-gas all-pagas all-ld all-gcc all-xiberty all-newlib \
all-libio all-librx
all-libio: all-gas all-pagas all-ld all-gcc all-xiberty all-newlib
all-libiberty:
all-libstdc++: all-gas all-pagas all-ld all-gcc all-xiberty all-newlib \
all-libio
all-m4: all-libiberty
all-make: all-libiberty
all-mmalloc:
all-newlib: all-binutils all-gas all-pagas all-gcc
all-opcodes: all-bfd
all-patch:
all-prms: all-libiberty
all-rcs:
all-readline:
all-recode: all-libiberty
all-sed: all-libiberty
all-send-pr: all-prms
all-shellutils:
all-sim: all-libiberty all-bfd
all-tar: all-libiberty
all-tcl:
all-tclX: all-tcl all-tk
all-tk: all-tcl
all-texinfo: all-libiberty
all-textutils:
all-tgas: all-libiberty all-bfd
all-time:
all-wdiff:
all-uudecode: all-libiberty
all-xiberty: all-gcc all-ld all-newlib
### other supporting targets
MAKEDIRS= \
$(prefix) \
$(exec_prefix) \
$(tooldir)
.PHONY: install-dirs
install-dirs:
@for i in $(MAKEDIRS) ; do \
echo Making $$i... ; \
parent=`echo $$i | sed -e 's@/[^/]*$$@@' | sed -e 's@^$$@/@'`; \
if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi ; \
if [ ! -d $$i ] ; then \
if mkdir $$i ; then \
true ; \
else \
exit 1 ; \
fi ; \
else \
true ; \
fi ; \
done
dir.info: do-install-info
if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
$(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
mv -f dir.info.new dir.info ; \
else true ; \
fi
dist:
@echo "Building a full distribution of this tree isn't done"
@echo "via 'make dist'. Check out the etc/ subdirectory"
etags tags: TAGS
# Right now this just builds TAGS in each subdirectory. emacs19 has the
# ability to use several tags files at once, so there is probably no need
# to combine them into one big TAGS file (like CVS 1.3 does). We could
# (if we felt like it) have this Makefile write a piece of elisp which
# the user could load to tell emacs19 where all the TAGS files we just
# built are.
TAGS: do-TAGS
# with the gnu make, this is done automatically.
Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag)
$(SHELL) ./config.status
#
# Support for building net releases
# Files in devo used in any net release.
# ChangeLog omitted because it may refer to files which are not in this
# distribution (perhaps it would be better to include it anyway).
DEVO_SUPPORT= README Makefile.in configure configure.in \
config.guess config.sub config move-if-change \
COPYING COPYING.LIB install.sh
# Files in devo/etc used in any net release.
# ChangeLog omitted because it may refer to files which are not in this
# distribution (perhaps it would be better to include it anyway).
ETC_SUPPORT= Makefile.in cfg-paper.texi configure.in configure.man \
configure.texi standards.texi make-stds.texi
ETC_SUPPORT_PFX=configure.info standards.info cfg-paper.info
# When you use `make setup-dirs' or `make taz' you should always redefine
# this macro.
SUPPORT_FILES = list-of-support-files-for-tool-in-question
# Directories that might want `make diststuff' run.
DISTSTUFFDIRS= ld gprof gdb libg++ binutils gnats gas
# Files where "byacc" (Cygnus version) should be changed to "bison -y" (FSF).
DISTBISONFILES= binutils/Makefile.in gas/Makefile.in gdb/Makefile.in
# Directories where "info" should be built.
DISTDOCDIRS= ld gprof binutils gas bfd libg++ libio gdb gnats send-pr etc
.PHONY: taz
taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) \
texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
# Make sure "diststuff" files get built properly.
for f in $(DISTBISONFILES) ; do \
if [ -r $$f ]; then \
sed '/^BISON *=.*$$/s/.*/BISON = bison -y/' <$$f >tmp ; \
mv -f tmp $$f ; \
else true; fi ; \
done
# Take out texinfo from a few places; make simple BISON=bison line.
sed -e '/^all\.normal: /s/\all-texinfo //' \
-e '/^ install-texinfo /d' \
-e '/^BISON = /,/^$$/d' \
-e '/^# BISON:/s/.*/BISON = bison -y/' \
<Makefile.in >tmp
mv -f tmp Makefile.in
#
$(start-sanitize-Sanitize)
@if [ -f .Sanitize ] ; then echo "RUN Sanitize FIRST!" ; false ; fi ;
$(end-sanitize-Sanitize)
./configure sun4
# Doc files don't change; include them in distribution.
for f in $(DISTDOCDIRS) ; do \
if [ -r $$f/Makefile ]; then \
(cd $$f ; $(MAKE) info) || exit 1 ; \
else true ; fi ; \
done
# Make links, and run "make diststuff" when needed.
# The `echo' for setting `p' is to convert all whitespace to spaces.
# Then the `case' further below should tell whether $$d is in
# DISTSTUFFDIRS.
rm -rf proto-toplev ; mkdir proto-toplev
set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
p=" `echo $(DISTSTUFFDIRS)` " ; \
for d in $$dirs ; do \
if [ -d $$d ]; then \
case " $$p " in \
*" $$d "*) \
echo making diststuff in $$d ; \
(cd $$d ; pwd ; $(MAKE) diststuff ) || exit 1 ;; \
esac ; \
if [ -d $$d/proto-$$d.dir ]; then \
ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
else \
ln -s ../$$d proto-toplev/$$d ; \
fi ; \
else ln -s ../$$d proto-toplev/$$d ; fi ; \
done
$(MAKE) distclean
#
mkdir proto-toplev/etc
(cd proto-toplev/etc; \
for i in $(ETC_SUPPORT); do \
ln -s ../../etc/$$i . ; \
done ; \
for i in $(ETC_SUPPORT_PFX); do \
ln -s ../../etc/$$i* . ; \
done)
#
# Take out texinfo and glob from configurable dirs
rm proto-toplev/configure.in
sed -e '/^host_tools=/s/texinfo //' \
-e '/^host_libs=/s/glob //' \
<configure.in >proto-toplev/configure.in
#
mkdir proto-toplev/texinfo
ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
ln -s ../../texinfo/gpl.texinfo proto-toplev/texinfo/
ln -s ../../texinfo/lgpl.texinfo proto-toplev/texinfo/
ln -s ../../texinfo/tex3patch proto-toplev/texinfo/
chmod og=u `find . -print`
(VER=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`; \
echo "==> Making $(TOOL)-$$VER.tar.gz"; \
rm -f $(TOOL)-$$VER; ln -s proto-toplev $(TOOL)-$$VER; \
tar cfh - $(TOOL)-$$VER \
| $(GZIPPROG) -v -9 >$(TOOL)-$$VER.tar.gz )
TEXINFO_SUPPORT= texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo
DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
.PHONY: gas.tar.gz
GAS_SUPPORT_DIRS= bfd include libiberty opcodes
gas.tar.gz: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
$(MAKE) -f Makefile.in taz TOOL=gas \
SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
# The FSF "binutils" release includes gprof and ld.
.PHONY: binutils.tar.gz
BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof
binutils.tar.gz: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
$(MAKE) -f Makefile.in taz TOOL=binutils \
SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS) makeall.bat configure.bat"
.PHONY: gas+binutils.tar.gz
GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
gas+binutils.tar.gz: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
$(MAKE) -f Makefile.in taz TOOL=gas \
SUPPORT_FILES="$(GASB_SUPPORT_DIRS) makeall.bat configure.bat"
.PHONY: libg++.tar.gz
LIBGXX_SUPPORT_DIRS=include libio librx libiberty xiberty
libg++.tar.gz: $(DIST_SUPPORT) libg++
$(MAKE) -f Makefile.in taz TOOL=libg++ \
SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)"
GNATS_SUPPORT_DIRS=include libiberty send-pr
gnats.tar.gz: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
$(MAKE) -f Makefile.in taz TOOL=gnats \
SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
.PHONY: gdb.tar.gz
GDB_SUPPORT_DIRS= bfd glob include libiberty mmalloc opcodes readline sim
gdb.tar.gz: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
$(MAKE) -f Makefile.in taz TOOL=gdb \
SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
.PHONY: newlib.tar.gz
NEWLIB_SUPPORT_DIRS=
newlib.tar.gz: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
$(MAKE) -f Makefile.in taz TOOL=newlib \
SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" \
DISTDOCDIRS="$(DISTDOCDIRS) newlib"
.NOEXPORT:
MAKEOVERRIDES=
# start-sanitize-chill
## This is ugly, but I don't want GNU make to put these variables in
## the environment. Older makes will see this as a set of targets
## with no dependencies and no actions.
unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :
# end-sanitize-chill
# end of Makefile.in
Reference in New Issue View Git Blame Copy Permalink