mirror/binutils-gdb
2
0
Fork 0
mirror of https://sourceware.org/git/binutils-gdb.git synced 2024-12-03 04:12:10 +08:00
Code Issues Packages Projects Releases Wiki Activity
7c86ed394a
binutils-gdb/include/coff/ti.h
Timothy Wall b9af77f58f Clean up load page support for tic54x.
2000-04-18 02:21:27 +00:00

435 lines
15 KiB
C
Raw Blame History

/* COFF information for TI COFF support. Definitions in this file should be
customized in a target-specific file, and then this file included (see
tic54x.h for an example). */
#ifndef COFF_TI_H
#define COFF_TI_H
/********************** FILE HEADER **********************/
struct external_filehdr {
char f_magic[2]; /* magic number */
char f_nscns[2]; /* number of sections */
char f_timdat[4]; /* time & date stamp */
char f_symptr[4]; /* file pointer to symtab */
char f_nsyms[4]; /* number of symtab entries */
char f_opthdr[2]; /* sizeof(optional hdr) */
char f_flags[2]; /* flags */
char f_target_id[2]; /* magic no. (TI COFF-specific) */
};
/* COFF0 has magic number in f_magic, and omits f_target_id from the file
header; for later versions, f_magic is 0xC1 for COFF1 and 0xC2 for COFF2
and the target-specific magic number is found in f_target_id */
#define TICOFF0MAGIC TI_TARGET_ID
#define TICOFF1MAGIC 0x00C1
#define TICOFF2MAGIC 0x00C2
#define TICOFF_AOUT_MAGIC 0x0108 /* magic number in optional header */
#define TICOFF 1 /* customize coffcode.h */
/* The target_id field changes depending on the particular CPU target */
/* for COFF0, the target id appeared in f_magic, where COFFX magic is now */
#ifndef TI_TARGET_ID
#error "TI_TARGET_ID needs to be defined for your CPU"
#endif
/* Which bfd_arch to use... */
#ifndef TICOFF_TARGET_ARCH
#error "TICOFF_TARGET_ARCH needs to be defined for your CPU"
#endif
/* Default to COFF2 for file output */
#ifndef TICOFF_DEFAULT_MAGIC
#define TICOFF_DEFAULT_MAGIC TICOFF2MAGIC
#endif
/* This value is made available in the rare case where a bfd is unavailable */
#ifndef OCTETS_PER_BYTE_POWER
#warn OCTETS_PER_BYTE_POWER not defined for this CPU, it will default to 0
#else
#define OCTETS_PER_BYTE (1<<OCTETS_PER_BYTE_POWER)
#endif
/* default alignment is on a byte (not octet!) boundary */
#ifndef COFF_DEFAULT_SECTION_ALIGNMENT_POWER
#define COFF_DEFAULT_SECTION_ALIGNMENT_POWER 0
#endif
/* TI COFF encodes the section alignment in the section header flags */
#define COFF_ALIGN_IN_SECTION_HEADER 1
#define COFF_ALIGN_IN_S_FLAGS 1
/* requires a power-of-two argument */
#define COFF_ENCODE_ALIGNMENT(S,X) ((S).s_flags |= (((unsigned)(X)&0xF)<<8))
/* result is a power of two */
#define COFF_DECODE_ALIGNMENT(X) (((X)>>8)&0xF)
#define COFF0_P(ABFD) (bfd_coff_filhsz(ABFD) == FILHSZ_V0)
#define COFF2_P(ABFD) (bfd_coff_scnhsz(ABFD) != SCNHSZ_V01)
#define COFF0_BADMAG(x) ((x).f_magic != TICOFF0MAGIC)
#define COFF1_BADMAG(x) ((x).f_magic != TICOFF1MAGIC || (x).f_target_id != TI_TARGET_ID)
#define COFF2_BADMAG(x) ((x).f_magic != TICOFF2MAGIC || (x).f_target_id != TI_TARGET_ID)
/* we need to read/write an extra field in the coff file header */
#ifndef COFF_ADJUST_FILEHDR_IN_POST
#define COFF_ADJUST_FILEHDR_IN_POST(abfd,src,dst) \
do { ((struct internal_filehdr *)(dst))->f_target_id = \
bfd_h_get_16(abfd, (bfd_byte *)(((FILHDR *)(src))->f_target_id)); \
} while(0)
#endif
#ifndef COFF_ADJUST_FILEHDR_OUT_POST
#define COFF_ADJUST_FILEHDR_OUT_POST(abfd,src,dst) \
do { bfd_h_put_16(abfd, ((struct internal_filehdr *)(src))->f_target_id, \
(bfd_byte *)(((FILHDR *)(dst))->f_target_id)); \
} while(0)
#endif
#define FILHDR struct external_filehdr
#define FILHSZ 22
#define FILHSZ_V0 20 /* COFF0 omits target_id field */
/* File header flags */
#define F_RELFLG (0x0001)
#define F_EXEC (0x0002)
#define F_LNNO (0x0004)
/* F_LSYMS needs to be redefined in your source file */
#define F_LSYMS_TICOFF (0x0010) /* normal COFF is 0x8 */
#define F_10 0x00 /* file built for TMS320C1x devices */
#define F_20 0x10 /* file built for TMS320C2x devices */
#define F_25 0x20 /* file built for TMS320C2x/C5x devices */
#define F_LENDIAN 0x0100 /* 16 bits/word, LSB first */
#define F_SYMMERGE 0x1000 /* duplicate symbols were removed */
/********************** OPTIONAL HEADER **********************/
typedef struct
{
char magic[2]; /* type of file (0x108) */
char vstamp[2]; /* version stamp */
char tsize[4]; /* text size in bytes, padded to FW bdry*/
char dsize[4]; /* initialized data " " */
char bsize[4]; /* uninitialized data " " */
char entry[4]; /* entry pt. */
char text_start[4]; /* base of text used for this file */
char data_start[4]; /* base of data used for this file */
}
AOUTHDR;
#define AOUTHDRSZ 28
#define AOUTSZ 28
/********************** SECTION HEADER **********************/
/* COFF0, COFF1 */
struct external_scnhdr_v01 {
char s_name[8]; /* section name */
char s_paddr[4]; /* physical address, aliased s_nlib */
char s_vaddr[4]; /* virtual address */
char s_size[4]; /* section size (in WORDS) */
char s_scnptr[4]; /* file ptr to raw data for section */
char s_relptr[4]; /* file ptr to relocation */
char s_lnnoptr[4]; /* file ptr to line numbers */
char s_nreloc[2]; /* number of relocation entries */
char s_nlnno[2]; /* number of line number entries*/
char s_flags[2]; /* flags */
char s_reserved[1]; /* reserved */
char s_page[1]; /* section page number (LOAD) */
};
/* COFF2 */
struct external_scnhdr {
char s_name[8]; /* section name */
char s_paddr[4]; /* physical address, aliased s_nlib */
char s_vaddr[4]; /* virtual address */
char s_size[4]; /* section size (in WORDS) */
char s_scnptr[4]; /* file ptr to raw data for section */
char s_relptr[4]; /* file ptr to relocation */
char s_lnnoptr[4]; /* file ptr to line numbers */
char s_nreloc[4]; /* number of relocation entries */
char s_nlnno[4]; /* number of line number entries*/
char s_flags[4]; /* flags */
char s_reserved[2]; /* reserved */
char s_page[2]; /* section page number (LOAD) */
};
/*
* Special section flags
*/
/* TI COFF defines these flags;
STYP_CLINK: the section should be excluded from the final
linker output if there are no references found to any symbol in the section
STYP_BLOCK: the section should be blocked, i.e. if the section would cross
a page boundary, it is started at a page boundary instead.
TI COFF puts the section alignment power of two in the section flags
e.g. 2**N is alignment, flags |= (N & 0xF) << 8
*/
#define STYP_CLINK (0x4000)
#define STYP_BLOCK (0x1000)
#define STYP_ALIGN (0x0F00) /* TI COFF stores section alignment here */
#define SCNHDR_V01 struct external_scnhdr_v01
#define SCNHDR struct external_scnhdr
#define SCNHSZ_V01 40 /* for v0 and v1 */
#define SCNHSZ 48
/* COFF2 changes the offsets and sizes of these fields
Assume we're dealing with the COFF2 scnhdr structure, and adjust
accordingly
*/
#define GET_SCNHDR_NRELOC(ABFD,PTR) \
(COFF2_P(ABFD) ? bfd_h_get_32 (ABFD,PTR) : bfd_h_get_16 (ABFD, PTR))
#define PUT_SCNHDR_NRELOC(ABFD,VAL,PTR) \
(COFF2_P(ABFD) ? bfd_h_put_32 (ABFD,VAL,PTR) : bfd_h_put_16 (ABFD,VAL,PTR))
#define GET_SCNHDR_NLNNO(ABFD,PTR) \
(COFF2_P(ABFD) ? bfd_h_get_32 (ABFD,PTR) : bfd_h_get_16 (ABFD, (PTR)-2))
#define PUT_SCNHDR_NLNNO(ABFD,VAL,PTR) \
(COFF2_P(ABFD) ? bfd_h_put_32 (ABFD,VAL,PTR) : bfd_h_put_16 (ABFD,VAL,(PTR)-2))
#define GET_SCNHDR_FLAGS(ABFD,PTR) \
(COFF2_P(ABFD) ? bfd_h_get_32 (ABFD,PTR) : bfd_h_get_16 (ABFD, (PTR)-4))
#define PUT_SCNHDR_FLAGS(ABFD,VAL,PTR) \
(COFF2_P(ABFD) ? bfd_h_put_32 (ABFD,VAL,PTR) : bfd_h_put_16 (ABFD,VAL,(PTR)-4))
#define GET_SCNHDR_PAGE(ABFD,PTR) \
(COFF2_P(ABFD) ? bfd_h_get_16 (ABFD,PTR) : bfd_h_get_8 (ABFD, (PTR)-7))
/* on output, make sure that the "reserved" field is zero */
#define PUT_SCNHDR_PAGE(ABFD,VAL,PTR) \
(COFF2_P(ABFD) ? bfd_h_put_16 (ABFD,VAL,PTR) : \
bfd_h_put_8 (ABFD,VAL,(PTR)-7), bfd_h_put_8 (ABFD, 0, (PTR)-8))
/* TI COFF stores section size as number of bytes (address units, not octets),
so adjust to be number of octets, which is what BFD expects */
#define GET_SCNHDR_SIZE(ABFD,SZP) \
(bfd_h_get_32(ABFD,SZP)*bfd_octets_per_byte(ABFD))
#define PUT_SCNHDR_SIZE(ABFD,SZ,SZP) \
bfd_h_put_32(ABFD,(SZ)/bfd_octets_per_byte(ABFD),SZP)
#define COFF_ADJUST_SCNHDR_IN_POST(ABFD,EXT,INT) \
do { ((struct internal_scnhdr *)(INT))->s_page = \
GET_SCNHDR_PAGE(ABFD,(bfd_byte *)((SCNHDR *)(EXT))->s_page); \
} while(0)
/* The line number and reloc overflow checking in coff_swap_scnhdr_out in
coffswap.h doesn't use PUT_X for s_nlnno and s_nreloc.
Due to different sized v0/v1/v2 section headers, we have to re-write these
fields.
*/
#define COFF_ADJUST_SCNHDR_OUT_POST(ABFD,INT,EXT) \
do { \
PUT_SCNHDR_NLNNO(ABFD,((struct internal_scnhdr *)(INT))->s_nlnno,\
(bfd_byte *)((SCNHDR *)(EXT))->s_nlnno); \
PUT_SCNHDR_NRELOC(ABFD,((struct internal_scnhdr *)(INT))->s_nreloc,\
(bfd_byte *)((SCNHDR *)(EXT))->s_nreloc); \
PUT_SCNHDR_FLAGS(ABFD,((struct internal_scnhdr *)(INT))->s_flags, \
(bfd_byte *)((SCNHDR *)(EXT))->s_flags); \
PUT_SCNHDR_PAGE(ABFD,((struct internal_scnhdr *)(INT))->s_page, \
(bfd_byte *)((SCNHDR *)(EXT))->s_page); \
} while(0)
/* Page macros
The first GDB port requires flags in its remote memory access commands to
distinguish between data/prog space. hopefully we can make this go away
eventually. stuff the page in the upper bits of a 32-bit address, since
the c5x family only uses 16 or 23 bits.
c2x, c5x and most c54x devices have 16-bit addresses, but the c548 has
23-bit program addresses. make sure the page flags don't interfere
These flags are used by GDB to identify the destination page for
addresses.
*/
/* recognized load pages */
#define PG_PROG 0x0 /* PROG page */
#define PG_DATA 0x1 /* DATA page */
#define ADDR_MASK 0x00FFFFFF
#define PG_TO_FLAG(p) (((unsigned long)(p) & 0xFF) << 24)
#define FLAG_TO_PG(f) (((f) >> 24) & 0xFF)
/*
* names of "special" sections
*/
#define _TEXT ".text"
#define _DATA ".data"
#define _BSS ".bss"
#define _CINIT ".cinit" /* initialized C data */
#define _SCONST ".const" /* constants */
#define _SWITCH ".switch" /* switch tables */
#define _STACK ".stack" /* C stack */
#define _SYSMEM ".sysmem" /* used for malloc et al. syscalls */
/********************** LINE NUMBERS **********************/
/* 1 line number entry for every "breakpointable" source line in a section.
* Line numbers are grouped on a per function basis; first entry in a function
* grouping will have l_lnno = 0 and in place of physical address will be the
* symbol table index of the function name.
*/
struct external_lineno {
union {
char l_symndx[4]; /* function name symbol index, iff l_lnno == 0*/
char l_paddr[4]; /* (physical) address of line number */
} l_addr;
char l_lnno[2]; /* line number */
};
#define LINENO struct external_lineno
#define LINESZ 6
/********************** SYMBOLS **********************/
/* NOTE: this is what a local label looks like in assembly source; what it
looks like in COFF output is undefined */
#define TICOFF_LOCAL_LABEL_P(NAME) \
((NAME[0] == '$' && NAME[1] >= '0' && NAME[1] <= '9' && NAME[2] == '\0') \
|| NAME[strlen(NAME)-1] == '?')
#define E_SYMNMLEN 8 /* # characters in a symbol name */
#define E_FILNMLEN 14 /* # characters in a file name */
#define E_DIMNUM 4 /* # array dimensions in auxiliary entry */
struct external_syment
{
union {
char e_name[E_SYMNMLEN];
struct {
char e_zeroes[4];
char e_offset[4];
} e;
} e;
char e_value[4];
char e_scnum[2];
char e_type[2];
char e_sclass[1];
char e_numaux[1];
};
#define N_BTMASK (017)
#define N_TMASK (060)
#define N_BTSHFT (4)
#define N_TSHIFT (2)
union external_auxent {
struct {
char x_tagndx[4]; /* str, un, or enum tag indx */
union {
struct {
char x_lnno[2]; /* declaration line number */
char x_size[2]; /* str/union/array size */
} x_lnsz;
char x_fsize[4]; /* size of function */
} x_misc;
union {
struct { /* if ISFCN, tag, or .bb */
char x_lnnoptr[4]; /* ptr to fcn line # */
char x_endndx[4]; /* entry ndx past block end */
} x_fcn;
struct { /* if ISARY, up to 4 dimen. */
char x_dimen[E_DIMNUM][2];
} x_ary;
} x_fcnary;
char x_tvndx[2]; /* tv index */
} x_sym;
union {
char x_fname[E_FILNMLEN];
struct {
char x_zeroes[4];
char x_offset[4];
} x_n;
} x_file;
struct {
char x_scnlen[4]; /* section length */
char x_nreloc[2]; /* # relocation entries */
char x_nlinno[2]; /* # line numbers */
} x_scn;
struct {
char x_tvfill[4]; /* tv fill value */
char x_tvlen[2]; /* length of .tv */
char x_tvran[2][2]; /* tv range */
} x_tv; /* info about .tv section (in auxent of symbol .tv)) */
};
#define SYMENT struct external_syment
#define SYMESZ 18
#define AUXENT union external_auxent
#define AUXESZ 18
/* section lengths are in target bytes (not host bytes) */
#define GET_SCN_SCNLEN(ABFD,EXT) \
(bfd_h_get_32(ABFD,(bfd_byte *)(EXT)->x_scn.x_scnlen)*bfd_octets_per_byte(ABFD))
#define PUT_SCN_SCNLEN(ABFD,INT,EXT) \
bfd_h_put_32(ABFD,(INT)/bfd_octets_per_byte(ABFD),\
(bfd_byte *)(EXT)->x_scn.x_scnlen)
/* lnsz size is in bits in COFF file, in bytes in BFD */
#define GET_LNSZ_SIZE(abfd, ext) \
(bfd_h_get_16(abfd, (bfd_byte *)ext->x_sym.x_misc.x_lnsz.x_size) / \
(class != C_FIELD ? 8 : 1))
#define PUT_LNSZ_SIZE(abfd, in, ext) \
bfd_h_put_16(abfd, ((class != C_FIELD) ? (in)*8 : (in)), \
(bfd_byte*) ext->x_sym.x_misc.x_lnsz.x_size)
/* TI COFF stores offsets for MOS and MOU in bits; BFD expects bytes */
#define COFF_ADJUST_SYM_IN_POST(ABFD,EXT,INT) \
do { struct internal_syment *dst = (struct internal_syment *)(INT); \
if (dst->n_sclass == C_MOS || dst->n_sclass == C_MOU) dst->n_value /= 8; \
} while (0)
#define COFF_ADJUST_SYM_OUT_POST(ABFD,INT,EXT) \
do { struct internal_syment *src = (struct internal_syment *)(INT); \
SYMENT *dst = (SYMENT *)(EXT); \
if(src->n_sclass == C_MOU || src->n_sclass == C_MOS) \
bfd_h_put_32(abfd,src->n_value * 8,(bfd_byte *)dst->e_value); \
} while (0)
/* Detect section-relative absolute symbols so they get flagged with a sym
index of -1.
*/
#define SECTION_RELATIVE_ABSOLUTE_SYMBOL_P(RELOC,SECT) \
((*(RELOC)->sym_ptr_ptr)->section->output_section == (SECT) \
&& (RELOC)->howto->name[0] == 'A')
/********************** RELOCATION DIRECTIVES **********************/
struct external_reloc_v0 {
char r_vaddr[4];
char r_symndx[2];
char r_reserved[2];
char r_type[2];
};
struct external_reloc {
char r_vaddr[4];
char r_symndx[4];
char r_reserved[2]; /* extended pmad byte for COFF2 */
char r_type[2];
};
#define RELOC struct external_reloc
#define RELSZ_V0 10 /* FIXME -- coffcode.h needs fixing */
#define RELSZ 12 /* for COFF1/2 */
/* various relocation types. */
#define R_ABS 0x0000 /* no relocation */
#define R_REL13 0x002A /* 13-bit direct reference (???) */
#define R_PARTLS7 0x0028 /* 7 LSBs of an address */
#define R_PARTMS9 0x0029 /* 9MSBs of an address */
#define R_EXTWORD 0x002B /* 23-bit direct reference */
#define R_EXTWORD16 0x002C /* 16-bit direct reference to 23-bit addr*/
#define R_EXTWORDMS7 0x002D /* upper 7 bits of 23-bit address */
#endif /* COFF_TI_H */
Reference in New Issue View Git Blame Copy Permalink