mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-15 04:31:49 +08:00
f486487f55
This is a patch I extracted from Pedro's C++ branch. It contains the most trivial enum fixes, where an integer type/value was used instead of the appropriate enum type/value. It fixes many C++ errors, since in C++ you can't mix integers and enums implicitely. Regardless of the C++ conversion, I think this is a good cleanup to make use of the appropriate enum types. Regression-tested on native x86_64. gdb/ChangeLog: * aarch64-linux-nat.c (aarch64_linux_can_use_hw_breakpoint): Use enum type or value instead of integer. (aarch64_linux_insert_watchpoint): Likewise. (aarch64_linux_remove_watchpoint): Likewise. * ada-lang.c (ada_op_print_tab): Likewise. * amd64-linux-tdep.c (amd64_canonicalize_syscall): Likewise. (amd64_linux_syscall_record_common): Likewise. * arch-utils.c (target_byte_order_user): Likewise. (default_byte_order): Likewise. * arm-linux-nat.c (arm_linux_can_use_hw_breakpoint): Likewise. (arm_linux_get_hwbp_type): Likewise. (arm_linux_hw_watchpoint_initialize): Likewise. (arm_linux_insert_watchpoint): Likewise. * arm-linux-tdep.c (arm_canonicalize_syscall): Likewise. (arm_linux_syscall_record): Likewise. * breakpoint.c (update_watchpoint): Likewise. (breakpoint_here_p): Likewise. (bpstat_print): Likewise. (enable_breakpoint_disp): Likewise. * c-lang.c (c_op_print_tab): Likewise. * cli/cli-decode.c (add_info_alias): Likewise. * d-lang.c (d_op_print_tab): Likewise. * eval.c (evaluate_subexp_standard): Likewise. * f-exp.y (dot_ops): Likewise. (f77_keywords): Likewise. * f-lang.c (f_op_print_tab): Likewise. * go-lang.c (go_op_print_tab): Likewise. * guile/scm-breakpoint.c (gdbscm_make_breakpoint): Likewise. * guile/scm-cmd.c (gdbscm_make_command): Likewise. * guile/scm-param.c (gdbscm_make_parameter): Likewise. * guile/scm-pretty-print.c (gdbscm_apply_val_pretty_printer): Likewise. * guile/scm-string.c (struct scm_to_stringn_data): Likewise. (struct scm_from_stringn_data): Likewise. * i386-linux-tdep.c (i386_canonicalize_syscall): Likewise. * ia64-linux-nat.c (ia64_linux_insert_watchpoint): Likewise. (ia64_linux_remove_watchpoint): Likewise. (ia64_linux_can_use_hw_breakpoint): Likewise. * infrun.c (print_stop_event): Likewise. * jv-lang.c (java_op_print_tab): Likewise. * linux-nat.c (linux_proc_xfer_partial): Likewise. * linux-nat.h (struct lwp_info): Likewise. * linux-thread-db.c (enable_thread_event): Likewise. * m2-lang.c (m2_op_print_tab): Likewise. * mi/mi-cmd-stack.c (mi_cmd_stack_list_locals): Likewise. (mi_cmd_stack_list_variables): Likewise. * mi/mi-main.c (mi_cmd_trace_frame_collected): Likewise. * mi/mi-out.c (mi_table_begin): Likewise. (mi_table_header): Likewise. * mips-linux-nat.c (mips_linux_can_use_hw_breakpoint): Likewise. (mips_linux_insert_watchpoint): Likewise. (mips_linux_remove_watchpoint): Likewise. * nat/mips-linux-watch.c (mips_linux_watch_type_to_irw): Likewise. * nat/mips-linux-watch.h (struct mips_watchpoint): Likewise. (mips_linux_watch_type_to_irw): Likewise. * nto-procfs.c (procfs_can_use_hw_breakpoint): Likewise. (procfs_insert_hw_watchpoint): Likewise. (procfs_remove_hw_watchpoint): Likewise. (procfs_hw_watchpoint): Likewise. (procfs_can_use_hw_breakpoint): Likewise. (procfs_remove_hw_watchpoint): Likewise. (procfs_insert_hw_watchpoint): Likewise. * p-lang.c (pascal_op_print_tab): Likewise. * ppc-linux-nat.c (ppc_linux_can_use_hw_breakpoint): Likewise. * ppc-linux-tdep.c (ppu2spu_unwind_register): Likewise. * ppc-sysv-tdep.c (get_decimal_float_return_value): Likewise. * procfs.c (procfs_can_use_hw_breakpoint): Likewise. (procfs_insert_watchpoint): Likewise. (procfs_remove_watchpoint): Likewise. * psymtab.c (recursively_search_psymtabs): Likewise. * remote-m32r-sdi.c (m32r_can_use_hw_watchpoint): Likewise. (m32r_insert_watchpoint): Likewise. * remote-mips.c (mips_can_use_watchpoint): Likewise. (mips_insert_watchpoint): Likewise. (mips_remove_watchpoint): Likewise. * remote.c (watchpoint_to_Z_packet): Likewise. (remote_insert_watchpoint): Likewise. (remote_remove_watchpoint): Likewise. (remote_check_watch_resources): Likewise. * s390-linux-nat.c (s390_insert_watchpoint): Likewise. (s390_remove_watchpoint): Likewise. (s390_can_use_hw_breakpoint): Likewise. * s390-linux-tdep.c (s390_gdbarch_init): Likewise. * spu-linux-nat.c (spu_can_use_hw_breakpoint): Likewise. * target.h (struct target_ops): Likewise. * tilegx-tdep.c (tilegx_analyze_prologue): Likewise. * ui-out.c (struct ui_out_hdr): Likewise. (append_header_to_list): Likewise. (get_next_header): Likewise. (verify_field): Likewise. (ui_out_begin): Likewise. (ui_out_field_int): Likewise. (ui_out_field_fmt_int): Likewise. (ui_out_field_skip): Likewise. (ui_out_field_string): Likewise. (ui_out_field_fmt): Likewise. * varobj.c (new_variable): Likewise. * x86-nat.c (x86_insert_watchpoint): Likewise. (x86_remove_watchpoint): Likewise. (x86_can_use_hw_breakpoint): Likewise. * xtensa-tdep.h (struct gdbarch_tdep): Likewise. * inflow.c (enum gdb_has_a_terminal_flag_enum): Add name to previously anonymous enumeration type.. * linux-record.h (enum gdb_syscall): Add gdb_sys_no_syscall value. * target-debug.h (target_debug_print_enum_target_hw_bp_type): New. (target_debug_print_enum_bptype): New. * target-delegates.c: Regenerate.
216 lines
7.7 KiB
C
216 lines
7.7 KiB
C
/* Native debugging support for GNU/Linux (LWP layer).
|
|
|
|
Copyright (C) 2000-2015 Free Software Foundation, Inc.
|
|
|
|
This file is part of GDB.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
#include "nat/linux-nat.h"
|
|
#include "target.h"
|
|
#include <signal.h>
|
|
|
|
struct arch_lwp_info;
|
|
|
|
/* Structure describing an LWP. This is public only for the purposes
|
|
of ALL_LWPS; target-specific code should generally not access it
|
|
directly. */
|
|
|
|
struct lwp_info
|
|
{
|
|
/* The process id of the LWP. This is a combination of the LWP id
|
|
and overall process id. */
|
|
ptid_t ptid;
|
|
|
|
/* If this flag is set, we need to set the event request flags the
|
|
next time we see this LWP stop. */
|
|
int must_set_ptrace_flags;
|
|
|
|
/* Non-zero if this LWP is cloned. In this context "cloned" means
|
|
that the LWP is reporting to its parent using a signal other than
|
|
SIGCHLD. */
|
|
int cloned;
|
|
|
|
/* Non-zero if we sent this LWP a SIGSTOP (but the LWP didn't report
|
|
it back yet). */
|
|
int signalled;
|
|
|
|
/* Non-zero if this LWP is stopped. */
|
|
int stopped;
|
|
|
|
/* Non-zero if this LWP will be/has been resumed. Note that an LWP
|
|
can be marked both as stopped and resumed at the same time. This
|
|
happens if we try to resume an LWP that has a wait status
|
|
pending. We shouldn't let the LWP run until that wait status has
|
|
been processed, but we should not report that wait status if GDB
|
|
didn't try to let the LWP run. */
|
|
int resumed;
|
|
|
|
/* The last resume GDB requested on this thread. */
|
|
enum resume_kind last_resume_kind;
|
|
|
|
/* If non-zero, a pending wait status. */
|
|
int status;
|
|
|
|
/* When 'stopped' is set, this is where the lwp last stopped, with
|
|
decr_pc_after_break already accounted for. If the LWP is
|
|
running, and stepping, this is the address at which the lwp was
|
|
resumed (that is, it's the previous stop PC). If the LWP is
|
|
running and not stepping, this is 0. */
|
|
CORE_ADDR stop_pc;
|
|
|
|
/* Non-zero if we were stepping this LWP. */
|
|
int step;
|
|
|
|
/* The reason the LWP last stopped, if we need to track it
|
|
(breakpoint, watchpoint, etc.) */
|
|
enum target_stop_reason stop_reason;
|
|
|
|
/* On architectures where it is possible to know the data address of
|
|
a triggered watchpoint, STOPPED_DATA_ADDRESS_P is non-zero, and
|
|
STOPPED_DATA_ADDRESS contains such data address. Otherwise,
|
|
STOPPED_DATA_ADDRESS_P is false, and STOPPED_DATA_ADDRESS is
|
|
undefined. Only valid if STOPPED_BY_WATCHPOINT is true. */
|
|
int stopped_data_address_p;
|
|
CORE_ADDR stopped_data_address;
|
|
|
|
/* Non-zero if we expect a duplicated SIGINT. */
|
|
int ignore_sigint;
|
|
|
|
/* If WAITSTATUS->KIND != TARGET_WAITKIND_SPURIOUS, the waitstatus
|
|
for this LWP's last event. This may correspond to STATUS above,
|
|
or to a local variable in lin_lwp_wait. */
|
|
struct target_waitstatus waitstatus;
|
|
|
|
/* Signal wether we are in a SYSCALL_ENTRY or
|
|
in a SYSCALL_RETURN event.
|
|
Values:
|
|
- TARGET_WAITKIND_SYSCALL_ENTRY
|
|
- TARGET_WAITKIND_SYSCALL_RETURN */
|
|
enum target_waitkind syscall_state;
|
|
|
|
/* The processor core this LWP was last seen on. */
|
|
int core;
|
|
|
|
/* Arch-specific additions. */
|
|
struct arch_lwp_info *arch_private;
|
|
|
|
/* Next LWP in list. */
|
|
struct lwp_info *next;
|
|
};
|
|
|
|
/* The global list of LWPs, for ALL_LWPS. Unlike the threads list,
|
|
there is always at least one LWP on the list while the GNU/Linux
|
|
native target is active. */
|
|
extern struct lwp_info *lwp_list;
|
|
|
|
/* Does the current host support PTRACE_GETREGSET? */
|
|
enum tribool { TRIBOOL_UNKNOWN = -1, TRIBOOL_FALSE = 0, TRIBOOL_TRUE = 1 };
|
|
extern enum tribool have_ptrace_getregset;
|
|
|
|
/* Iterate over each active thread (light-weight process). */
|
|
#define ALL_LWPS(LP) \
|
|
for ((LP) = lwp_list; \
|
|
(LP) != NULL; \
|
|
(LP) = (LP)->next)
|
|
|
|
/* Attempt to initialize libthread_db. */
|
|
void check_for_thread_db (void);
|
|
|
|
/* Called from the LWP layer to inform the thread_db layer that PARENT
|
|
spawned CHILD. Both LWPs are currently stopped. This function
|
|
does whatever is required to have the child LWP under the
|
|
thread_db's control --- e.g., enabling event reporting. Returns
|
|
true on success, false if the process isn't using libpthread. */
|
|
extern int thread_db_notice_clone (ptid_t parent, ptid_t child);
|
|
|
|
/* Return the set of signals used by the threads library. */
|
|
extern void lin_thread_get_thread_signals (sigset_t *mask);
|
|
|
|
/* Find process PID's pending signal set from /proc/pid/status. */
|
|
void linux_proc_pending_signals (int pid, sigset_t *pending,
|
|
sigset_t *blocked, sigset_t *ignored);
|
|
|
|
extern int lin_lwp_attach_lwp (ptid_t ptid);
|
|
|
|
/* For linux_stop_lwp see nat/linux-nat.h. */
|
|
|
|
/* Stop all LWPs, synchronously. (Any events that trigger while LWPs
|
|
are being stopped are left pending.) */
|
|
extern void linux_stop_and_wait_all_lwps (void);
|
|
|
|
/* Set resumed LWPs running again, as they were before being stopped
|
|
with linux_stop_and_wait_all_lwps. (LWPS with pending events are
|
|
left stopped.) */
|
|
extern void linux_unstop_all_lwps (void);
|
|
|
|
/* Create a prototype generic GNU/Linux target. The client can
|
|
override it with local methods. */
|
|
struct target_ops * linux_target (void);
|
|
|
|
/* Create a generic GNU/Linux target using traditional
|
|
ptrace register access. */
|
|
struct target_ops *
|
|
linux_trad_target (CORE_ADDR (*register_u_offset)(struct gdbarch *, int, int));
|
|
|
|
/* Register the customized GNU/Linux target. This should be used
|
|
instead of calling add_target directly. */
|
|
void linux_nat_add_target (struct target_ops *);
|
|
|
|
/* Register a method to call whenever a new thread is attached. */
|
|
void linux_nat_set_new_thread (struct target_ops *, void (*) (struct lwp_info *));
|
|
|
|
|
|
/* Register a method to call whenever a new fork is attached. */
|
|
typedef void (linux_nat_new_fork_ftype) (struct lwp_info *parent,
|
|
pid_t child_pid);
|
|
void linux_nat_set_new_fork (struct target_ops *ops,
|
|
linux_nat_new_fork_ftype *fn);
|
|
|
|
/* Register a method to call whenever a process is killed or
|
|
detached. */
|
|
typedef void (linux_nat_forget_process_ftype) (pid_t pid);
|
|
void linux_nat_set_forget_process (struct target_ops *ops,
|
|
linux_nat_forget_process_ftype *fn);
|
|
|
|
/* Call the method registered with the function above. PID is the
|
|
process to forget about. */
|
|
void linux_nat_forget_process (pid_t pid);
|
|
|
|
/* Register a method that converts a siginfo object between the layout
|
|
that ptrace returns, and the layout in the architecture of the
|
|
inferior. */
|
|
void linux_nat_set_siginfo_fixup (struct target_ops *,
|
|
int (*) (siginfo_t *,
|
|
gdb_byte *,
|
|
int));
|
|
|
|
/* Register a method to call prior to resuming a thread. */
|
|
|
|
void linux_nat_set_prepare_to_resume (struct target_ops *,
|
|
void (*) (struct lwp_info *));
|
|
|
|
/* Update linux-nat internal state when changing from one fork
|
|
to another. */
|
|
void linux_nat_switch_fork (ptid_t new_ptid);
|
|
|
|
/* Store the saved siginfo associated with PTID in *SIGINFO.
|
|
Return 1 if it was retrieved successfully, 0 otherwise (*SIGINFO is
|
|
uninitialized in such case). */
|
|
int linux_nat_get_siginfo (ptid_t ptid, siginfo_t *siginfo);
|
|
|
|
/* Set alternative SIGTRAP-like events recognizer. */
|
|
void linux_nat_set_status_is_event (struct target_ops *t,
|
|
int (*status_is_event) (int status));
|