binutils-gdb/gdb/aarch64-linux-nat.c
Yao Qi 750ce8d1ca Support single step by arch or target
Nowadays, GDB only knows whether architecture supports hardware single
step or software single step (through gdbarch hook software_single_step),
and for a given instruction or instruction sequence, GDB knows how to
do single step (hardware or software).  However, GDB doesn't know whether
the target supports hardware single step.  It is possible that the
architecture doesn't support hardware single step, such as arm, but
the target supports, such as simulator.  This was discussed in this
thread https://www.sourceware.org/ml/gdb/2009-12/msg00033.html before.

I encounter this problem for aarch64 multi-arch support.  When aarch64
debugs arm program, gdbarch is arm, so software single step is still
used.  However, the underneath linux kernel does support hardware
single step, so IWBN to use it.

This patch is to add a new target_ops hook to_can_do_single_step, and
only use it in arm_linux_software_single_step to decide whether or not
to use hardware single step.  On the native aarch64 linux target, 1 is
returned.  On other targets, -1 is returned.  On the remote target, if
the target supports s and S actions in the vCont? reply, then target
can do single step.  However,  old GDBserver will send s and S in the
reply to vCont?, which will confuse new GDB.  For example, old GDBserver
on arm-linux will send s and S in the reply to vCont?, but it doesn't
support hardware single step.  On the other hand, new GDBserver, on
arm-linux for example, will not send s and S in the reply to vCont?,
but old GDB thinks it doesn't support vCont packet at all.  In order
to address this problem, I add a new qSupported feature vContSupported,
which indicates GDB wants to know the supported actions in the reply
to vCont?, and qSupported response contains vContSupported if the
stub is able tell supported vCont actions in the reply of vCont?.

If the patched GDB talks with patched GDBserver on x86, the RSP traffic
is like this:

 -> $qSupported:...+;vContSupported+
 <- ...+;vContSupported+
 ...
 -> $vCont?
 <- vCont;c;C;t;s;S;r

then, GDB knows the stub can do single step, and may stop using software
single step even the architecture doesn't support hardware single step.

If the patched GDB talks with patched GDBserver on arm, the last vCont?
reply will become:

 <- vCont;c;C;t

GDB thinks the target doesn't support single step, so it will use software
single step.

If the patched GDB talks with unpatched GDBserver, the RSP traffic is like
this:

 -> $qSupported:...+;vContSupported+
 <- ...+
 ...
 -> $vCont?
 <- vCont;c;C;t;s;S;r

although GDBserver returns s and S, GDB still thinks GDBserver may not
support single step because it doesn't support vContSupported.

If the unpatched GDB talks with patched GDBserver on x86, the RSP traffic
is like:

 -> $qSupported:...+;
 <- ...+;vContSupported+
 ...
 -> $vCont?
 <- vCont;c;C;t;s;S;r

Since GDB doesn't sent vContSupported in the qSupported feature, GDBserver
sends s and S regardless of the support of hardware single step.

gdb:

2015-09-15  Yao Qi  <yao.qi@linaro.org>

	* aarch64-linux-nat.c (aarch64_linux_can_do_single_step): New
	function.
	(_initialize_aarch64_linux_nat): Install it to to_can_do_single_step.
	* arm-linux-tdep.c (arm_linux_software_single_step): Return 0
	if target_can_do_single_step returns 1.
	* remote.c (struct vCont_action_support) <s, S>: New fields.
	(PACKET_vContSupported): New enum.
	(remote_protocol_features): New element for vContSupported.
	(remote_query_supported): Append "vContSupported+".
	(remote_vcont_probe): Remove support_s and support_S, use
	rs->supports_vCont.s and rs->supports_vCont.S instead.  Disable
	vCont packet if c and C actions are not supported.
	(remote_can_do_single_step): New function.
	(init_remote_ops): Install it to to_can_do_single_step.
	(_initialize_remote): Call add_packet_config_cmd.
	* target.h (struct target_ops) <to_can_do_single_step>: New field.
	(target_can_do_single_step): New macro.
	* target-delegates.c: Re-generated.

gdb/gdbserver:

2015-09-15  Yao Qi  <yao.qi@linaro.org>

	* server.c (vCont_supported): New global variable.
	(handle_query): Set vCont_supported to 1 if "vContSupported+"
	matches.  Append ";vContSupported+" to own_buf.
	(handle_v_requests): Append ";s;S" to own_buf if target supports
	hardware single step or vCont_supported is false.
	(capture_main): Set vCont_supported to zero.

gdb/doc:

2015-09-15  Yao Qi  <yao.qi@linaro.org>

	* gdb.texinfo (General Query Packets): Add vContSupported to
	tables of 'gdbfeatures' and 'stub features' supported in the
	qSupported packet, as well as to the list containing stub
	feature details.
2015-09-15 14:09:18 +01:00

885 lines
25 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Native-dependent code for GNU/Linux AArch64.
Copyright (C) 2011-2015 Free Software Foundation, Inc.
Contributed by ARM Ltd.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "inferior.h"
#include "gdbcore.h"
#include "regcache.h"
#include "linux-nat.h"
#include "target-descriptions.h"
#include "auxv.h"
#include "gdbcmd.h"
#include "aarch64-tdep.h"
#include "aarch64-linux-tdep.h"
#include "aarch32-linux-nat.h"
#include "nat/aarch64-linux.h"
#include "nat/aarch64-linux-hw-point.h"
#include "elf/external.h"
#include "elf/common.h"
#include "nat/gdb_ptrace.h"
#include <sys/utsname.h>
#include <asm/ptrace.h>
#include "gregset.h"
/* Defines ps_err_e, struct ps_prochandle. */
#include "gdb_proc_service.h"
#ifndef TRAP_HWBKPT
#define TRAP_HWBKPT 0x0004
#endif
/* Per-process data. We don't bind this to a per-inferior registry
because of targets like x86 GNU/Linux that need to keep track of
processes that aren't bound to any inferior (e.g., fork children,
checkpoints). */
struct aarch64_process_info
{
/* Linked list. */
struct aarch64_process_info *next;
/* The process identifier. */
pid_t pid;
/* Copy of aarch64 hardware debug registers. */
struct aarch64_debug_reg_state state;
};
static struct aarch64_process_info *aarch64_process_list = NULL;
/* Find process data for process PID. */
static struct aarch64_process_info *
aarch64_find_process_pid (pid_t pid)
{
struct aarch64_process_info *proc;
for (proc = aarch64_process_list; proc; proc = proc->next)
if (proc->pid == pid)
return proc;
return NULL;
}
/* Add process data for process PID. Returns newly allocated info
object. */
static struct aarch64_process_info *
aarch64_add_process (pid_t pid)
{
struct aarch64_process_info *proc;
proc = XCNEW (struct aarch64_process_info);
proc->pid = pid;
proc->next = aarch64_process_list;
aarch64_process_list = proc;
return proc;
}
/* Get data specific info for process PID, creating it if necessary.
Never returns NULL. */
static struct aarch64_process_info *
aarch64_process_info_get (pid_t pid)
{
struct aarch64_process_info *proc;
proc = aarch64_find_process_pid (pid);
if (proc == NULL)
proc = aarch64_add_process (pid);
return proc;
}
/* Called whenever GDB is no longer debugging process PID. It deletes
data structures that keep track of debug register state. */
static void
aarch64_forget_process (pid_t pid)
{
struct aarch64_process_info *proc, **proc_link;
proc = aarch64_process_list;
proc_link = &aarch64_process_list;
while (proc != NULL)
{
if (proc->pid == pid)
{
*proc_link = proc->next;
xfree (proc);
return;
}
proc_link = &proc->next;
proc = *proc_link;
}
}
/* Get debug registers state for process PID. */
struct aarch64_debug_reg_state *
aarch64_get_debug_reg_state (pid_t pid)
{
return &aarch64_process_info_get (pid)->state;
}
/* Fill GDB's register array with the general-purpose register values
from the current thread. */
static void
fetch_gregs_from_thread (struct regcache *regcache)
{
int ret, tid;
struct gdbarch *gdbarch = get_regcache_arch (regcache);
elf_gregset_t regs;
struct iovec iovec;
/* Make sure REGS can hold all registers contents on both aarch64
and arm. */
gdb_static_assert (sizeof (regs) >= 18 * 4);
tid = ptid_get_lwp (inferior_ptid);
iovec.iov_base = &regs;
if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32)
iovec.iov_len = 18 * 4;
else
iovec.iov_len = sizeof (regs);
ret = ptrace (PTRACE_GETREGSET, tid, NT_PRSTATUS, &iovec);
if (ret < 0)
perror_with_name (_("Unable to fetch general registers."));
if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32)
aarch32_gp_regcache_supply (regcache, (uint32_t *) regs, 1);
else
{
int regno;
for (regno = AARCH64_X0_REGNUM; regno <= AARCH64_CPSR_REGNUM; regno++)
regcache_raw_supply (regcache, regno, &regs[regno - AARCH64_X0_REGNUM]);
}
}
/* Store to the current thread the valid general-purpose register
values in the GDB's register array. */
static void
store_gregs_to_thread (const struct regcache *regcache)
{
int ret, tid;
elf_gregset_t regs;
struct iovec iovec;
struct gdbarch *gdbarch = get_regcache_arch (regcache);
/* Make sure REGS can hold all registers contents on both aarch64
and arm. */
gdb_static_assert (sizeof (regs) >= 18 * 4);
tid = ptid_get_lwp (inferior_ptid);
iovec.iov_base = &regs;
if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32)
iovec.iov_len = 18 * 4;
else
iovec.iov_len = sizeof (regs);
ret = ptrace (PTRACE_GETREGSET, tid, NT_PRSTATUS, &iovec);
if (ret < 0)
perror_with_name (_("Unable to fetch general registers."));
if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32)
aarch32_gp_regcache_collect (regcache, (uint32_t *) regs, 1);
else
{
int regno;
for (regno = AARCH64_X0_REGNUM; regno <= AARCH64_CPSR_REGNUM; regno++)
if (REG_VALID == regcache_register_status (regcache, regno))
regcache_raw_collect (regcache, regno,
&regs[regno - AARCH64_X0_REGNUM]);
}
ret = ptrace (PTRACE_SETREGSET, tid, NT_PRSTATUS, &iovec);
if (ret < 0)
perror_with_name (_("Unable to store general registers."));
}
/* Fill GDB's register array with the fp/simd register values
from the current thread. */
static void
fetch_fpregs_from_thread (struct regcache *regcache)
{
int ret, tid;
elf_fpregset_t regs;
struct iovec iovec;
struct gdbarch *gdbarch = get_regcache_arch (regcache);
/* Make sure REGS can hold all VFP registers contents on both aarch64
and arm. */
gdb_static_assert (sizeof regs >= VFP_REGS_SIZE);
tid = ptid_get_lwp (inferior_ptid);
iovec.iov_base = &regs;
if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32)
{
iovec.iov_len = VFP_REGS_SIZE;
ret = ptrace (PTRACE_GETREGSET, tid, NT_ARM_VFP, &iovec);
if (ret < 0)
perror_with_name (_("Unable to fetch VFP registers."));
aarch32_vfp_regcache_supply (regcache, (gdb_byte *) &regs, 32);
}
else
{
int regno;
iovec.iov_len = sizeof (regs);
ret = ptrace (PTRACE_GETREGSET, tid, NT_FPREGSET, &iovec);
if (ret < 0)
perror_with_name (_("Unable to fetch vFP/SIMD registers."));
for (regno = AARCH64_V0_REGNUM; regno <= AARCH64_V31_REGNUM; regno++)
regcache_raw_supply (regcache, regno,
&regs.vregs[regno - AARCH64_V0_REGNUM]);
regcache_raw_supply (regcache, AARCH64_FPSR_REGNUM, &regs.fpsr);
regcache_raw_supply (regcache, AARCH64_FPCR_REGNUM, &regs.fpcr);
}
}
/* Store to the current thread the valid fp/simd register
values in the GDB's register array. */
static void
store_fpregs_to_thread (const struct regcache *regcache)
{
int ret, tid;
elf_fpregset_t regs;
struct iovec iovec;
struct gdbarch *gdbarch = get_regcache_arch (regcache);
/* Make sure REGS can hold all VFP registers contents on both aarch64
and arm. */
gdb_static_assert (sizeof regs >= VFP_REGS_SIZE);
tid = ptid_get_lwp (inferior_ptid);
iovec.iov_base = &regs;
if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32)
{
iovec.iov_len = VFP_REGS_SIZE;
ret = ptrace (PTRACE_GETREGSET, tid, NT_ARM_VFP, &iovec);
if (ret < 0)
perror_with_name (_("Unable to fetch VFP registers."));
aarch32_vfp_regcache_collect (regcache, (gdb_byte *) &regs, 32);
}
else
{
int regno;
iovec.iov_len = sizeof (regs);
ret = ptrace (PTRACE_GETREGSET, tid, NT_FPREGSET, &iovec);
if (ret < 0)
perror_with_name (_("Unable to fetch FP/SIMD registers."));
for (regno = AARCH64_V0_REGNUM; regno <= AARCH64_V31_REGNUM; regno++)
if (REG_VALID == regcache_register_status (regcache, regno))
regcache_raw_collect (regcache, regno,
(char *) &regs.vregs[regno - AARCH64_V0_REGNUM]);
if (REG_VALID == regcache_register_status (regcache, AARCH64_FPSR_REGNUM))
regcache_raw_collect (regcache, AARCH64_FPSR_REGNUM,
(char *) &regs.fpsr);
if (REG_VALID == regcache_register_status (regcache, AARCH64_FPCR_REGNUM))
regcache_raw_collect (regcache, AARCH64_FPCR_REGNUM,
(char *) &regs.fpcr);
}
if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32)
{
ret = ptrace (PTRACE_SETREGSET, tid, NT_ARM_VFP, &iovec);
if (ret < 0)
perror_with_name (_("Unable to store VFP registers."));
}
else
{
ret = ptrace (PTRACE_SETREGSET, tid, NT_FPREGSET, &iovec);
if (ret < 0)
perror_with_name (_("Unable to store FP/SIMD registers."));
}
}
/* Implement the "to_fetch_register" target_ops method. */
static void
aarch64_linux_fetch_inferior_registers (struct target_ops *ops,
struct regcache *regcache,
int regno)
{
if (regno == -1)
{
fetch_gregs_from_thread (regcache);
fetch_fpregs_from_thread (regcache);
}
else if (regno < AARCH64_V0_REGNUM)
fetch_gregs_from_thread (regcache);
else
fetch_fpregs_from_thread (regcache);
}
/* Implement the "to_store_register" target_ops method. */
static void
aarch64_linux_store_inferior_registers (struct target_ops *ops,
struct regcache *regcache,
int regno)
{
if (regno == -1)
{
store_gregs_to_thread (regcache);
store_fpregs_to_thread (regcache);
}
else if (regno < AARCH64_V0_REGNUM)
store_gregs_to_thread (regcache);
else
store_fpregs_to_thread (regcache);
}
/* Fill register REGNO (if it is a general-purpose register) in
*GREGSETPS with the value in GDB's register array. If REGNO is -1,
do this for all registers. */
void
fill_gregset (const struct regcache *regcache,
gdb_gregset_t *gregsetp, int regno)
{
regcache_collect_regset (&aarch64_linux_gregset, regcache,
regno, (gdb_byte *) gregsetp,
AARCH64_LINUX_SIZEOF_GREGSET);
}
/* Fill GDB's register array with the general-purpose register values
in *GREGSETP. */
void
supply_gregset (struct regcache *regcache, const gdb_gregset_t *gregsetp)
{
regcache_supply_regset (&aarch64_linux_gregset, regcache, -1,
(const gdb_byte *) gregsetp,
AARCH64_LINUX_SIZEOF_GREGSET);
}
/* Fill register REGNO (if it is a floating-point register) in
*FPREGSETP with the value in GDB's register array. If REGNO is -1,
do this for all registers. */
void
fill_fpregset (const struct regcache *regcache,
gdb_fpregset_t *fpregsetp, int regno)
{
regcache_collect_regset (&aarch64_linux_fpregset, regcache,
regno, (gdb_byte *) fpregsetp,
AARCH64_LINUX_SIZEOF_FPREGSET);
}
/* Fill GDB's register array with the floating-point register values
in *FPREGSETP. */
void
supply_fpregset (struct regcache *regcache, const gdb_fpregset_t *fpregsetp)
{
regcache_supply_regset (&aarch64_linux_fpregset, regcache, -1,
(const gdb_byte *) fpregsetp,
AARCH64_LINUX_SIZEOF_FPREGSET);
}
/* linux_nat_new_fork hook. */
static void
aarch64_linux_new_fork (struct lwp_info *parent, pid_t child_pid)
{
pid_t parent_pid;
struct aarch64_debug_reg_state *parent_state;
struct aarch64_debug_reg_state *child_state;
/* NULL means no watchpoint has ever been set in the parent. In
that case, there's nothing to do. */
if (parent->arch_private == NULL)
return;
/* GDB core assumes the child inherits the watchpoints/hw
breakpoints of the parent, and will remove them all from the
forked off process. Copy the debug registers mirrors into the
new process so that all breakpoints and watchpoints can be
removed together. */
parent_pid = ptid_get_pid (parent->ptid);
parent_state = aarch64_get_debug_reg_state (parent_pid);
child_state = aarch64_get_debug_reg_state (child_pid);
*child_state = *parent_state;
}
/* Called by libthread_db. Returns a pointer to the thread local
storage (or its descriptor). */
ps_err_e
ps_get_thread_area (const struct ps_prochandle *ph,
lwpid_t lwpid, int idx, void **base)
{
struct iovec iovec;
uint64_t reg;
iovec.iov_base = &reg;
iovec.iov_len = sizeof (reg);
if (ptrace (PTRACE_GETREGSET, lwpid, NT_ARM_TLS, &iovec) != 0)
return PS_ERR;
/* IDX is the bias from the thread pointer to the beginning of the
thread descriptor. It has to be subtracted due to implementation
quirks in libthread_db. */
*base = (void *) (reg - idx);
return PS_OK;
}
static void (*super_post_startup_inferior) (struct target_ops *self,
ptid_t ptid);
/* Implement the "to_post_startup_inferior" target_ops method. */
static void
aarch64_linux_child_post_startup_inferior (struct target_ops *self,
ptid_t ptid)
{
aarch64_forget_process (ptid_get_pid (ptid));
aarch64_linux_get_debug_reg_capacity (ptid_get_pid (ptid));
super_post_startup_inferior (self, ptid);
}
extern struct target_desc *tdesc_arm_with_vfpv3;
extern struct target_desc *tdesc_arm_with_neon;
/* Implement the "to_read_description" target_ops method. */
static const struct target_desc *
aarch64_linux_read_description (struct target_ops *ops)
{
CORE_ADDR at_phent;
if (target_auxv_search (ops, AT_PHENT, &at_phent) == 1)
{
if (at_phent == sizeof (Elf64_External_Phdr))
return tdesc_aarch64;
else
{
CORE_ADDR arm_hwcap = 0;
if (target_auxv_search (ops, AT_HWCAP, &arm_hwcap) != 1)
return ops->beneath->to_read_description (ops->beneath);
#ifndef COMPAT_HWCAP_VFP
#define COMPAT_HWCAP_VFP (1 << 6)
#endif
#ifndef COMPAT_HWCAP_NEON
#define COMPAT_HWCAP_NEON (1 << 12)
#endif
#ifndef COMPAT_HWCAP_VFPv3
#define COMPAT_HWCAP_VFPv3 (1 << 13)
#endif
if (arm_hwcap & COMPAT_HWCAP_VFP)
{
char *buf;
const struct target_desc *result = NULL;
if (arm_hwcap & COMPAT_HWCAP_NEON)
result = tdesc_arm_with_neon;
else if (arm_hwcap & COMPAT_HWCAP_VFPv3)
result = tdesc_arm_with_vfpv3;
return result;
}
return NULL;
}
}
return tdesc_aarch64;
}
/* Convert a native/host siginfo object, into/from the siginfo in the
layout of the inferiors' architecture. Returns true if any
conversion was done; false otherwise. If DIRECTION is 1, then copy
from INF to NATIVE. If DIRECTION is 0, copy from NATIVE to
INF. */
static int
aarch64_linux_siginfo_fixup (siginfo_t *native, gdb_byte *inf, int direction)
{
struct gdbarch *gdbarch = get_frame_arch (get_current_frame ());
/* Is the inferior 32-bit? If so, then do fixup the siginfo
object. */
if (gdbarch_bfd_arch_info (gdbarch)->bits_per_word == 32)
{
if (direction == 0)
aarch64_compat_siginfo_from_siginfo ((struct compat_siginfo *) inf,
native);
else
aarch64_siginfo_from_compat_siginfo (native,
(struct compat_siginfo *) inf);
return 1;
}
return 0;
}
/* Returns the number of hardware watchpoints of type TYPE that we can
set. Value is positive if we can set CNT watchpoints, zero if
setting watchpoints of type TYPE is not supported, and negative if
CNT is more than the maximum number of watchpoints of type TYPE
that we can support. TYPE is one of bp_hardware_watchpoint,
bp_read_watchpoint, bp_write_watchpoint, or bp_hardware_breakpoint.
CNT is the number of such watchpoints used so far (including this
one). OTHERTYPE is non-zero if other types of watchpoints are
currently enabled. */
static int
aarch64_linux_can_use_hw_breakpoint (struct target_ops *self,
enum bptype type,
int cnt, int othertype)
{
if (type == bp_hardware_watchpoint || type == bp_read_watchpoint
|| type == bp_access_watchpoint || type == bp_watchpoint)
{
if (aarch64_num_wp_regs == 0)
return 0;
}
else if (type == bp_hardware_breakpoint)
{
if (aarch64_num_bp_regs == 0)
return 0;
}
else
gdb_assert_not_reached ("unexpected breakpoint type");
/* We always return 1 here because we don't have enough information
about possible overlap of addresses that they want to watch. As an
extreme example, consider the case where all the watchpoints watch
the same address and the same region length: then we can handle a
virtually unlimited number of watchpoints, due to debug register
sharing implemented via reference counts. */
return 1;
}
/* Insert a hardware-assisted breakpoint at BP_TGT->reqstd_address.
Return 0 on success, -1 on failure. */
static int
aarch64_linux_insert_hw_breakpoint (struct target_ops *self,
struct gdbarch *gdbarch,
struct bp_target_info *bp_tgt)
{
int ret;
CORE_ADDR addr = bp_tgt->placed_address = bp_tgt->reqstd_address;
const int len = 4;
const enum target_hw_bp_type type = hw_execute;
struct aarch64_debug_reg_state *state
= aarch64_get_debug_reg_state (ptid_get_pid (inferior_ptid));
if (show_debug_regs)
fprintf_unfiltered
(gdb_stdlog,
"insert_hw_breakpoint on entry (addr=0x%08lx, len=%d))\n",
(unsigned long) addr, len);
ret = aarch64_handle_breakpoint (type, addr, len, 1 /* is_insert */, state);
if (show_debug_regs)
{
aarch64_show_debug_reg_state (state,
"insert_hw_breakpoint", addr, len, type);
}
return ret;
}
/* Remove a hardware-assisted breakpoint at BP_TGT->placed_address.
Return 0 on success, -1 on failure. */
static int
aarch64_linux_remove_hw_breakpoint (struct target_ops *self,
struct gdbarch *gdbarch,
struct bp_target_info *bp_tgt)
{
int ret;
CORE_ADDR addr = bp_tgt->placed_address;
const int len = 4;
const enum target_hw_bp_type type = hw_execute;
struct aarch64_debug_reg_state *state
= aarch64_get_debug_reg_state (ptid_get_pid (inferior_ptid));
if (show_debug_regs)
fprintf_unfiltered
(gdb_stdlog, "remove_hw_breakpoint on entry (addr=0x%08lx, len=%d))\n",
(unsigned long) addr, len);
ret = aarch64_handle_breakpoint (type, addr, len, 0 /* is_insert */, state);
if (show_debug_regs)
{
aarch64_show_debug_reg_state (state,
"remove_hw_watchpoint", addr, len, type);
}
return ret;
}
/* Implement the "to_insert_watchpoint" target_ops method.
Insert a watchpoint to watch a memory region which starts at
address ADDR and whose length is LEN bytes. Watch memory accesses
of the type TYPE. Return 0 on success, -1 on failure. */
static int
aarch64_linux_insert_watchpoint (struct target_ops *self,
CORE_ADDR addr, int len,
enum target_hw_bp_type type,
struct expression *cond)
{
int ret;
struct aarch64_debug_reg_state *state
= aarch64_get_debug_reg_state (ptid_get_pid (inferior_ptid));
if (show_debug_regs)
fprintf_unfiltered (gdb_stdlog,
"insert_watchpoint on entry (addr=0x%08lx, len=%d)\n",
(unsigned long) addr, len);
gdb_assert (type != hw_execute);
ret = aarch64_handle_watchpoint (type, addr, len, 1 /* is_insert */, state);
if (show_debug_regs)
{
aarch64_show_debug_reg_state (state,
"insert_watchpoint", addr, len, type);
}
return ret;
}
/* Implement the "to_remove_watchpoint" target_ops method.
Remove a watchpoint that watched the memory region which starts at
address ADDR, whose length is LEN bytes, and for accesses of the
type TYPE. Return 0 on success, -1 on failure. */
static int
aarch64_linux_remove_watchpoint (struct target_ops *self,
CORE_ADDR addr, int len,
enum target_hw_bp_type type,
struct expression *cond)
{
int ret;
struct aarch64_debug_reg_state *state
= aarch64_get_debug_reg_state (ptid_get_pid (inferior_ptid));
if (show_debug_regs)
fprintf_unfiltered (gdb_stdlog,
"remove_watchpoint on entry (addr=0x%08lx, len=%d)\n",
(unsigned long) addr, len);
gdb_assert (type != hw_execute);
ret = aarch64_handle_watchpoint (type, addr, len, 0 /* is_insert */, state);
if (show_debug_regs)
{
aarch64_show_debug_reg_state (state,
"remove_watchpoint", addr, len, type);
}
return ret;
}
/* Implement the "to_region_ok_for_hw_watchpoint" target_ops method. */
static int
aarch64_linux_region_ok_for_hw_watchpoint (struct target_ops *self,
CORE_ADDR addr, int len)
{
return aarch64_linux_region_ok_for_watchpoint (addr, len);
}
/* Implement the "to_stopped_data_address" target_ops method. */
static int
aarch64_linux_stopped_data_address (struct target_ops *target,
CORE_ADDR *addr_p)
{
siginfo_t siginfo;
int i, tid;
struct aarch64_debug_reg_state *state;
if (!linux_nat_get_siginfo (inferior_ptid, &siginfo))
return 0;
/* This must be a hardware breakpoint. */
if (siginfo.si_signo != SIGTRAP
|| (siginfo.si_code & 0xffff) != TRAP_HWBKPT)
return 0;
/* Check if the address matches any watched address. */
state = aarch64_get_debug_reg_state (ptid_get_pid (inferior_ptid));
for (i = aarch64_num_wp_regs - 1; i >= 0; --i)
{
const unsigned int len = aarch64_watchpoint_length (state->dr_ctrl_wp[i]);
const CORE_ADDR addr_trap = (CORE_ADDR) siginfo.si_addr;
const CORE_ADDR addr_watch = state->dr_addr_wp[i];
if (state->dr_ref_count_wp[i]
&& DR_CONTROL_ENABLED (state->dr_ctrl_wp[i])
&& addr_trap >= addr_watch
&& addr_trap < addr_watch + len)
{
*addr_p = addr_trap;
return 1;
}
}
return 0;
}
/* Implement the "to_stopped_by_watchpoint" target_ops method. */
static int
aarch64_linux_stopped_by_watchpoint (struct target_ops *ops)
{
CORE_ADDR addr;
return aarch64_linux_stopped_data_address (ops, &addr);
}
/* Implement the "to_watchpoint_addr_within_range" target_ops method. */
static int
aarch64_linux_watchpoint_addr_within_range (struct target_ops *target,
CORE_ADDR addr,
CORE_ADDR start, int length)
{
return start <= addr && start + length - 1 >= addr;
}
/* Implement the "to_can_do_single_step" target_ops method. */
static int
aarch64_linux_can_do_single_step (struct target_ops *target)
{
return 1;
}
/* Define AArch64 maintenance commands. */
static void
add_show_debug_regs_command (void)
{
/* A maintenance command to enable printing the internal DRi mirror
variables. */
add_setshow_boolean_cmd ("show-debug-regs", class_maintenance,
&show_debug_regs, _("\
Set whether to show variables that mirror the AArch64 debug registers."), _("\
Show whether to show variables that mirror the AArch64 debug registers."), _("\
Use \"on\" to enable, \"off\" to disable.\n\
If enabled, the debug registers values are shown when GDB inserts\n\
or removes a hardware breakpoint or watchpoint, and when the inferior\n\
triggers a breakpoint or watchpoint."),
NULL,
NULL,
&maintenance_set_cmdlist,
&maintenance_show_cmdlist);
}
/* -Wmissing-prototypes. */
void _initialize_aarch64_linux_nat (void);
void
_initialize_aarch64_linux_nat (void)
{
struct target_ops *t;
/* Fill in the generic GNU/Linux methods. */
t = linux_target ();
add_show_debug_regs_command ();
/* Add our register access methods. */
t->to_fetch_registers = aarch64_linux_fetch_inferior_registers;
t->to_store_registers = aarch64_linux_store_inferior_registers;
t->to_read_description = aarch64_linux_read_description;
t->to_can_use_hw_breakpoint = aarch64_linux_can_use_hw_breakpoint;
t->to_insert_hw_breakpoint = aarch64_linux_insert_hw_breakpoint;
t->to_remove_hw_breakpoint = aarch64_linux_remove_hw_breakpoint;
t->to_region_ok_for_hw_watchpoint =
aarch64_linux_region_ok_for_hw_watchpoint;
t->to_insert_watchpoint = aarch64_linux_insert_watchpoint;
t->to_remove_watchpoint = aarch64_linux_remove_watchpoint;
t->to_stopped_by_watchpoint = aarch64_linux_stopped_by_watchpoint;
t->to_stopped_data_address = aarch64_linux_stopped_data_address;
t->to_watchpoint_addr_within_range =
aarch64_linux_watchpoint_addr_within_range;
t->to_can_do_single_step = aarch64_linux_can_do_single_step;
/* Override the GNU/Linux inferior startup hook. */
super_post_startup_inferior = t->to_post_startup_inferior;
t->to_post_startup_inferior = aarch64_linux_child_post_startup_inferior;
/* Register the target. */
linux_nat_add_target (t);
linux_nat_set_new_thread (t, aarch64_linux_new_thread);
linux_nat_set_new_fork (t, aarch64_linux_new_fork);
linux_nat_set_forget_process (t, aarch64_forget_process);
linux_nat_set_prepare_to_resume (t, aarch64_linux_prepare_to_resume);
/* Add our siginfo layout converter. */
linux_nat_set_siginfo_fixup (t, aarch64_linux_siginfo_fixup);
}