binutils-gdb/gdb/configure.in
John Gilmore ef131e1315 * configure.in (target configurations): Reformat into table.
Remove unsupp. Amigados host and target.  Ditto Mach 386 target.

* tm-altosgas.h, tm-i386v-g.h:  Remove ancient coff encap configs.
* config/{altosgas.mt, i386v-g.mt, i386v32-g.mt}:  Ditto.
* config/{i386sco.mt,i386v32.mt}:  Remove; identical to i386v.mt.
* config/{go32.mt,i960.mt}:  Remove; they only printed error msgs.
* config/nindy960.mt:  Remove useless MT_CFLAGS setting.
* config/i386aout.mt:  Use tm-i386v.h, not tm-i386v-g.h.

* Makefile.in (config-check):  Add command to check whether
configure.in is consistent with config/*.
1992-08-28 04:58:27 +00:00

254 lines
5.8 KiB
Plaintext

configdirs="doc"
srcname="GDB"
srctrigger=main.c
target_dependent=true
# per-host:
# map host info into gdb names.
case "${host}" in
a29k-*-*) gdb_host=ultra3 ;;
arm-*-*) gdb_host=arm ;;
c[12]-*-*) gdb_host=convex ;;
hppa*-hp-bsd) gdb_host=hppabsd ;;
hppa*-hp-hpux) gdb_host=hppahpux ;;
i[34]86-ncr-*) gdb_host=ncr3000 ;;
i[34]86-sequent-*) gdb_host=symmetry ;;
i[34]86-*-go32) gdb_host=go32 ;;
i[34]86-*-linux) gdb_host=linux ;;
i[34]86-*-mach) gdb_host=i386mach ;;
i[34]86-*-scosysv*) gdb_host=i386sco ;;
i[34]86-*-sunos*) gdb_host=sun386 ;;
i[34]86-*-sysv32) gdb_host=i386v32 ;;
i[34]86-*-sysv4*) gdb_host=i386v4 ;;
i[34]86-*-sysv*) gdb_host=i386v ;;
i860-*-*) gdb_host=stratus ;;
m68000-sun-sunos3) gdb_host=sun2os3 ;;
m68000-sun-sunos4) gdb_host=sun2os4 ;;
m68030-sony-*) gdb_host=news1000 ;;
m68k-altos-*) gdb_host=altos ;;
m68k-apollo*-sysv*) gdb_host=apollo68v ;;
m68k-att-*) gdb_host=3b1 ;;
m68k-cbm-sysv4*) gdb_host=amix ;;
m68k-hp-bsd) gdb_host=hp300bsd ;;
m68k-hp-hpux) gdb_host=hp300hpux ;;
m68k-isi-*) gdb_host=isi ;;
m68k-sony-*) gdb_host=news ;;
m68k-sun-sunos3) gdb_host=sun3os3 ;;
m68k-sun-sunos4) gdb_host=sun3os4 ;;
m68k-sun-*) gdb_host=sun3 ;;
m88k-motorola-*) gdb_host=delta88 ;;
m88k-*-*) gdb_host=m88k ;;
mips-dec-*) gdb_host=decstation ;;
mips-little-*) gdb_host=littlemips ;;
mips-sgi-irix3) gdb_host=irix3 ;;
mips-sgi-irix4) gdb_host=irix4 ;;
mips-sony-*) gdb_host=bigmips ;;
none-*-*) gdb_host=none ;;
np1-*-*) gdb_host=np1 ;;
ns32k-umax-*) gdb_host=umax ;;
ns32k-utek-sysv) gdb_host=merlin ;;
pn-*-*) gdb_host=pn ;;
pyramid-*-*) gdb_host=pyramid ;;
romp-*-*) gdb_host=rtbsd ;;
rs6000-*-*) gdb_host=rs6000 ;;
sparc-*-solaris2*) gdb_host=sun4sol2 ;;
sparc-*-sunos3) gdb_host=sun4os3 ;;
sparc-*-sunos4) gdb_host=sun4os4 ;;
sparc-*-*) gdb_host=sun4 ;;
tahoe-*-*) gdb_host=tahoe ;;
vax-*-bsd*) gdb_host=vaxbsd ;;
vax-*-ultrix*) gdb_host=vaxult ;;
esac
if [ ! -f ${srcdir}/config/${gdb_host}.mh ]; then
echo '***' "Gdb does not support host ${host}" 1>&2
exit 1
fi
# We really shouldn't depend on there being a space after XM_FILE= ...
hostfile=`awk '$1 == "XM_FILE=" { print $2 }' <${srcdir}/config/${gdb_host}.mh`
# per-target:
case "${target}" in
a29k-*-aout) gdb_target=a29k ;;
a29k-*-coff) gdb_target=a29k ;;
a29k-*-ebmon) gdb_target=a29k ;;
a29k-*-kern) gdb_target=a29k-kern ;;
a29k-*-none) gdb_target=a29k ;;
a29k-*-sym1) gdb_target=ultra3 ;;
a29k-*-udi) gdb_target=a29k-udi ;;
arm-*-*) gdb_target=arm ;;
c1-*-*) gdb_target=convex ;;
c2-*-*) gdb_target=convex ;;
h8300-*-*) gdb_target=h8300hms ;;
hppa*-*-bsd) gdb_target=hppabsd ;;
hppa*-*-hpux) gdb_target=hppahpux ;;
i[34]86-sequent-*) gdb_target=symmetry ;;
i[34]86-ncr-*) gdb_target=ncr3000 ;;
i[34]86-*-sunos*) gdb_target=sun386 ;;
i[34]86-*-sysv4*) gdb_target=i386v4 ;;
i[34]86-*-scosysv3*) gdb_target=i386v ;;
i[34]86-*-sysv*) gdb_target=i386v ;;
i[34]86-*-coff) gdb_target=i386v ;;
i[34]86-*-aout) gdb_target=i386aout ;;
i[34]86-*-linux) gdb_target=linux ;;
i860-*-*) gdb_target=stratus ;;
i960-*-bout) gdb_target=vxworks960 ;;
i960-*-coff) gdb_target=nindy960 ;;
i960-*-nindy) gdb_target=nindy960 ;;
i960-*-vxworks) gdb_target=vxworks960 ;;
m68000-ericsson-*) gdb_target=es1800 ;;
m68000-*-sunos3) gdb_target=sun2os3 ;;
m68000-*-sunos4) gdb_target=sun2os4 ;;
m680[01234]0-*-vxworks) gdb_target=vxworks68 ;;
m68030-sony-*) gdb_target=news1000 ;;
m68k-altos-*) gdb_target=altos ;;
m68k-att-*) gdb_target=3b1 ;;
m68k-cbm-sysv4*) gdb_target=amix ;;
m68k-ericsson-*) gdb_target=es1800 ;;
m68k-hp-bsd) gdb_target=hp300bsd ;;
m68k-hp-hpux) gdb_target=hp300hpux ;;
m68k-isi-*) gdb_target=isi ;;
m68k-netx-*) gdb_target=vxworks68 ;;
m68k-sony-*) gdb_target=news ;;
m68k-*-sunos3*) gdb_target=sun3os3 ;;
m68k-*-sunos4*) gdb_target=sun3os4 ;;
m68k-sun-*) gdb_target=sun3 ;;
m68k-*-vxworks*) gdb_target=vxworks68 ;;
m68k-*-os68k) gdb_target=os68k ;;
m68kmote-tandem-*) gdb_target=st2000 ;;
m88k-motorola-*) gdb_target=delta88 ;;
m88k-*-*) gdb_target=m88k ;;
mips-big-*) gdb_target=bigmips ;;
mips-dec-*) gdb_target=decstation ;;
mips-little-*) gdb_target=littlemips ;;
mips-sgi-*) gdb_target=irix3 ;;
mips-sony-*) gdb_target=bigmips ;;
none-*-*) gdb_target=none ;;
np1-*-*) gdb_target=np1 ;;
ns32k-utek-sysv) gdb_target=merlin ;;
ns32k-utek-*) gdb_target=umax ;;
pn-*-*) gdb_target=pn ;;
pyramid-*-*) gdb_target=pyramid ;;
rs6000-*-*) gdb_target=rs6000 ;;
sparc-*-solaris2*) gdb_target=sun4sol2 ;;
sparc-*-sunos3) gdb_target=sun4os3 ;;
sparc-*-sunos4) gdb_target=sun4os4 ;;
sparc-*-*) gdb_target=sun4 ;;
tahoe-*-*) gdb_target=tahoe ;;
vax-*-*) gdb_target=vax ;;
esac
if [ ! -f ${srcdir}/config/${gdb_target}.mt ]; then
echo '***' "Gdb does not support target ${target}" 1>&2
exit 1
fi
if [ -z "${removing}" ] ; then
cat ${srcdir}/config/${gdb_host}.mh ${srcdir}/config/${gdb_target}.mt | awk '$1 == "#msg" {
print substr($0,6)}'
fi
# We really shouldn't depend on there being a space after TM_FILE= ...
targetfile=`awk '$1 == "TM_FILE=" { print $2 }' <${srcdir}/config/${gdb_target}.mt`
host_makefile_frag=config/${gdb_host}.mh
target_makefile_frag=config/${gdb_target}.mt
# If hostfile (XM_FILE) and/or targetfile (TM_FILE) is not set in the
# ?config/* file, we don't make the corresponding links. But we have
# to remove the xm.h files and tm.h files anyway, e.g. when switching
# from "configure host" to "configure none".
files=
links=
rm -f xm.h
if [ "${hostfile}" != "" ]; then
files="${files} ${hostfile}"
links="${links} xm.h"
fi
rm -f tm.h
if [ "${targetfile}" != "" ]; then
files="${files} ${targetfile}"
links="${links} tm.h"
fi
# post-target:
case ${srcdir} in
.)
;;
*)
grep -s "source ${srcdir}/.gdbinit" .gdbinit 2>/dev/null || \
echo "source ${srcdir}/.gdbinit" >> .gdbinit
esac
cat ${srcdir}/alldeps.mak ${srcdir}/depend >>Makefile