binutils-gdb/opcodes/ChangeLog
David S. Miller 6cda13266f Add support for SPARC T4 crypto instructions.
include/opcode/

	* sparc.h: Document new arg code' )' for crypto RS3
	immediates.

opcodes/

	* sparc-dis.c (print_insn_sparc): Handle ')'.
	* sparc-opc.c (sparc_opcodes): Add crypto instructions.

gas/

	* config/tc-sparc.c (sparc_ip): Likewise.  Accept instruction
	names containing "_".
	(sparc_arch_table): Add sparc4, v8pluse, and v9e.  Add crypto
	hwcap masks to v8plusv and v9v.

gas/testsuite/

	* gas/sparc/crypto.s: New file.
	* gas/sparc/crypto.d: New file.
	* gas/sparc/sparc.exp: Run crypto test.
2012-04-27 18:02:35 +00:00

186 lines
5.8 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

2012-04-27 David S. Miller <davem@davemloft.net>
* sparc-dis.c (print_insn_sparc): Handle ')'.
* sparc-opc.c (sparc_opcodes): Add crypto instructions.
* sparc-opc.c (sparc_opcodes): Rework table to put HWCAP values
into new struct sparc_opcode 'hwcaps' field instead of 'flags'.
2012-04-12 David S. Miller <davem@davemloft.net>
* sparc-dis.c (X_DISP10): Define.
(print_insn_sparc): Handle '='.
2012-04-01 Mike Frysinger <vapier@gentoo.org>
* bfin-dis.c (fmtconst): Replace decimal handling with a single
sprintf call and the '*' field width.
2012-03-23 Maxim Kuvyrkov <maxim@codesourcery.com>
* mips-dis.c (mips_arch_choices): Add entry for Broadcom XLP.
2012-03-16 Alan Modra <amodra@gmail.com>
* ppc-dis.c (PPC_OPC_SEGS, PPC_OP_TO_SEG): Delete.
(powerpc_opcd_indices): Bump array size.
(disassemble_init_powerpc): Set powerpc_opcd_indices entries
corresponding to unused opcodes to following entry.
(lookup_powerpc): New function, extracted and optimised from..
(print_insn_powerpc): ..here.
2012-03-15 Alan Modra <amodra@gmail.com>
James Lemke <jwlemke@codesourcery.com>
* disassemble.c (disassemble_init_for_target): Handle ppc init.
* ppc-dis.c (private): New var.
(powerpc_init_dialect): Don't return calloc failure, instead use
private.
(PPC_OPCD_SEGS, PPC_OP_TO_SEG): Define.
(powerpc_opcd_indices): New array.
(disassemble_init_powerpc): New function.
(print_insn_big_powerpc): Don't init dialect here.
(print_insn_little_powerpc): Likewise.
(print_insn_powerpc): Start search using powerpc_opcd_indices.
2012-03-10 Edmar Wienskoski <edmar@freescale.com>
* ppc-dis.c (ppc_opts): Add entries for "e5500" and "e6500".
* ppc-opc.c (insert_ls, TMR, ESYNC, XSYNCLE_MASK): New.
(PPCVEC2, PPCTMR, E6500): New short names.
(powerpc_opcodes): Add vabsdub, vabsduh, vabsduw, dni, mvidsplt,
mviwsplt, icblq., mftmr, mttmr, dcblq., miso, lvexbx, lvexhx,
lvexwx, stvexbx, stvexhx, stvexwx, lvepx, lvepxl, stvepx, stvepxl,
lvtrx, lvtrxl, lvtlx, lvtlxl, stvfrx, stvfrxl, stvflx, stvflxl,
lvswx, lvswxl, stvswx, stvswxl, lvsm mnemonics. Accept LS, ESYNC
optional operands on sync instruction for E6500 target.
2012-03-08 Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
* s390-opc.txt: Set instruction type of pku to SS_L2RDRD.
2012-02-27 Alan Modra <amodra@gmail.com>
* mt-dis.c: Regenerate.
2012-02-27 Alan Modra <amodra@gmail.com>
* v850-opc.c (extract_v8): Rearrange to make it obvious this
is the inverse of corresponding insert function.
(extract_d22, extract_u9, extract_r4): Likewise.
(extract_d9): Correct sign extension.
(extract_d16_15): Don't assume "long" is 32 bits, and don't
rely on implementation defined behaviour for shift right of
signed types.
(extract_d16_16, extract_d17_16, extract_i9): Likewise.
(extract_d23): Likewise, and correct mask.
2012-02-27 Alan Modra <amodra@gmail.com>
* crx-dis.c (print_arg): Mask constant to 32 bits.
* crx-opc.c (cst4_map): Use int array.
2012-02-27 Alan Modra <amodra@gmail.com>
* arc-dis.c (BITS): Don't use shifts to mask off bits.
(FIELDD): Sign extend with xor,sub.
2012-02-25 Walter Lee <walt@tilera.com>
* tilegx-opc.c: Handle TILEGX_OPC_LD4S_TLS and TILEGX_OPC_LD_TLS.
* tilepro-opc.c: Handle TILEPRO_OPC_LW_TLS and
TILEPRO_OPC_LW_TLS_SN.
2012-02-21 H.J. Lu <hongjiu.lu@intel.com>
* i386-opc.h (HLEPrefixNone): New.
(HLEPrefixLock): Likewise.
(HLEPrefixAny): Likewise.
(HLEPrefixRelease): Likewise.
2012-02-08 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (HLE_Fixup1): New.
(HLE_Fixup2): Likewise.
(HLE_Fixup3): Likewise.
(Ebh1): Likewise.
(Evh1): Likewise.
(Ebh2): Likewise.
(Evh2): Likewise.
(Ebh3): Likewise.
(Evh3): Likewise.
(MOD_C6_REG_7): Likewise.
(MOD_C7_REG_7): Likewise.
(RM_C6_REG_7): Likewise.
(RM_C7_REG_7): Likewise.
(XACQUIRE_PREFIX): Likewise.
(XRELEASE_PREFIX): Likewise.
(dis386): Use Ebh1/Evh1 on add, adc, and, btc, btr, bts,
cmpxchg, dec, inc, neg, not, or, sbb, sub, xor and xadd. Use
Ebh2/Evh2 on xchg. Use Ebh3/Evh3 on mov.
(reg_table): Use Ebh1/Evh1 on add, adc, and, dec, inc, neg,
not, or, sbb, sub and xor. Use Ebh3/Evh3 on mov. Use
MOD_C6_REG_7 and MOD_C7_REG_7.
(mod_table): Add MOD_C6_REG_7 and MOD_C7_REG_7.
(rm_table): Add RM_C6_REG_7 and RM_C7_REG_7. Add xend and
xtest.
(prefix_name): Handle XACQUIRE_PREFIX and XRELEASE_PREFIX.
(CMPXCHG8B_Fixup): Handle HLE prefix on cmpxchg8b.
* i386-gen.c (cpu_flag_init): Add CPU_HLE_FLAGS and
CPU_RTM_FLAGS.
(cpu_flags): Add CpuHLE and CpuRTM.
(opcode_modifiers): Add HLEPrefixOk.
* i386-opc.h (CpuHLE): New.
(CpuRTM): Likewise.
(HLEPrefixOk): Likewise.
(i386_cpu_flags): Add cpuhle and cpurtm.
(i386_opcode_modifier): Add hleprefixok.
* i386-opc.tbl: Add HLEPrefixOk=3 to mov. Add HLEPrefixOk to
add, adc, and, btc, btr, bts, cmpxchg, dec, inc, neg, not, or,
sbb, sub, xor and xadd. Add HLEPrefixOk=2 to xchg with memory
operand. Add xacquire, xrelease, xabort, xbegin, xend and
xtest.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2012-01-24 DJ Delorie <dj@redhat.com>
* rl78-decode.opc (rl78_decode_opcode): Add NOT1.
* rl78-decode.c: Regenerate.
2012-01-17 James Murray <jsm@jsm-net.demon.co.uk>
PR binutils/10173
* cr16-dis.c (print_arg): Test symtab_size not num_symbols.
2012-01-17 Andreas Schwab <schwab@linux-m68k.org>
* m68k-opc.c (m68k_opcodes): Fix entries for pmove with BADx/BACx
register and move them after pmove with PSR/PCSR register.
2012-01-13 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (mod_table): Add vmfunc.
* i386-gen.c (cpu_flag_init): Add CPU_VMFUNC_FLAGS.
(cpu_flags): CpuVMFUNC.
* i386-opc.h (CpuVMFUNC): New.
(i386_cpu_flags): Add cpuvmfunc.
* i386-opc.tbl: Add vmfunc.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
For older changes see ChangeLog-2011
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: