mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-15 04:31:49 +08:00
85102364b2
Fix typos in comments. NFC. Tested on x86_64-linux. gdb/ChangeLog: 2019-10-18 Tom de Vries <tdevries@suse.de> * aarch64-tdep.c: Fix typos in comments. * ada-lang.c: Same. * ada-tasks.c: Same. * alpha-tdep.c: Same. * alpha-tdep.h: Same. * amd64-nat.c: Same. * amd64-windows-tdep.c: Same. * arc-tdep.c: Same. * arc-tdep.h: Same. * arch-utils.c: Same. * arm-nbsd-tdep.c: Same. * arm-tdep.c: Same. * ax-gdb.c: Same. * blockframe.c: Same. * btrace.c: Same. * c-varobj.c: Same. * coff-pe-read.c: Same. * coffread.c: Same. * cris-tdep.c: Same. * darwin-nat.c: Same. * dbxread.c: Same. * dcache.c: Same. * disasm.c: Same. * dtrace-probe.c: Same. * dwarf-index-write.c: Same. * dwarf2-frame-tailcall.c: Same. * dwarf2-frame.c: Same. * dwarf2read.c: Same. * eval.c: Same. * exceptions.c: Same. * fbsd-tdep.c: Same. * findvar.c: Same. * frame.c: Same. * frv-tdep.c: Same. * gnu-v3-abi.c: Same. * go32-nat.c: Same. * h8300-tdep.c: Same. * hppa-tdep.c: Same. * i386-linux-tdep.c: Same. * i386-tdep.c: Same. * ia64-libunwind-tdep.c: Same. * ia64-tdep.c: Same. * infcmd.c: Same. * infrun.c: Same. * linespec.c: Same. * linux-nat.c: Same. * linux-thread-db.c: Same. * machoread.c: Same. * mdebugread.c: Same. * mep-tdep.c: Same. * mn10300-tdep.c: Same. * namespace.c: Same. * objfiles.c: Same. * opencl-lang.c: Same. * or1k-tdep.c: Same. * osabi.c: Same. * ppc-linux-nat.c: Same. * ppc-linux-tdep.c: Same. * ppc-sysv-tdep.c: Same. * printcmd.c: Same. * procfs.c: Same. * record-btrace.c: Same. * record-full.c: Same. * remote-fileio.c: Same. * remote.c: Same. * rs6000-tdep.c: Same. * s12z-tdep.c: Same. * score-tdep.c: Same. * ser-base.c: Same. * ser-go32.c: Same. * skip.c: Same. * sol-thread.c: Same. * solib-svr4.c: Same. * solib.c: Same. * source.c: Same. * sparc-nat.c: Same. * sparc-sol2-tdep.c: Same. * sparc-tdep.c: Same. * sparc64-tdep.c: Same. * stabsread.c: Same. * stack.c: Same. * symfile.c: Same. * symtab.c: Same. * target-descriptions.c: Same. * target-float.c: Same. * thread.c: Same. * utils.c: Same. * valops.c: Same. * valprint.c: Same. * value.c: Same. * varobj.c: Same. * windows-nat.c: Same. * xcoffread.c: Same. * xstormy16-tdep.c: Same. * xtensa-tdep.c: Same. Change-Id: I5175f1b107bfa4e1cdd4a3361ccb4739e53c75c4
2178 lines
76 KiB
C
2178 lines
76 KiB
C
/* Target dependent code for ARC architecture, for GDB.
|
|
|
|
Copyright 2005-2019 Free Software Foundation, Inc.
|
|
Contributed by Synopsys Inc.
|
|
|
|
This file is part of GDB.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
/* GDB header files. */
|
|
#include "defs.h"
|
|
#include "arch-utils.h"
|
|
#include "disasm.h"
|
|
#include "dwarf2-frame.h"
|
|
#include "frame-base.h"
|
|
#include "frame-unwind.h"
|
|
#include "gdbcore.h"
|
|
#include "gdbcmd.h"
|
|
#include "objfiles.h"
|
|
#include "prologue-value.h"
|
|
#include "trad-frame.h"
|
|
|
|
/* ARC header files. */
|
|
#include "opcode/arc.h"
|
|
#include "../opcodes/arc-dis.h"
|
|
#include "arc-tdep.h"
|
|
|
|
/* Standard headers. */
|
|
#include <algorithm>
|
|
|
|
/* Default target descriptions. */
|
|
#include "features/arc-v2.c"
|
|
#include "features/arc-arcompact.c"
|
|
|
|
/* The frame unwind cache for ARC. */
|
|
|
|
struct arc_frame_cache
|
|
{
|
|
/* The stack pointer at the time this frame was created; i.e. the caller's
|
|
stack pointer when this function was called. It is used to identify this
|
|
frame. */
|
|
CORE_ADDR prev_sp;
|
|
|
|
/* Register that is a base for this frame - FP for normal frame, SP for
|
|
non-FP frames. */
|
|
int frame_base_reg;
|
|
|
|
/* Offset from the previous SP to the current frame base. If GCC uses
|
|
`SUB SP,SP,offset` to allocate space for local variables, then it will be
|
|
done after setting up a frame pointer, but it still will be considered
|
|
part of prologue, therefore SP will be lesser than FP at the end of the
|
|
prologue analysis. In this case that would be an offset from old SP to a
|
|
new FP. But in case of non-FP frames, frame base is an SP and thus that
|
|
would be an offset from old SP to new SP. What is important is that this
|
|
is an offset from old SP to a known register, so it can be used to find
|
|
old SP.
|
|
|
|
Using FP is preferable, when possible, because SP can change in function
|
|
body after prologue due to alloca, variadic arguments or other shenanigans.
|
|
If that is the case in the caller frame, then PREV_SP will point to SP at
|
|
the moment of function call, but it will be different from SP value at the
|
|
end of the caller prologue. As a result it will not be possible to
|
|
reconstruct caller's frame and go past it in the backtrace. Those things
|
|
are unlikely to happen to FP - FP value at the moment of function call (as
|
|
stored on stack in callee prologue) is also an FP value at the end of the
|
|
caller's prologue. */
|
|
|
|
LONGEST frame_base_offset;
|
|
|
|
/* Store addresses for registers saved in prologue. During prologue analysis
|
|
GDB stores offsets relatively to "old SP", then after old SP is evaluated,
|
|
offsets are replaced with absolute addresses. */
|
|
struct trad_frame_saved_reg *saved_regs;
|
|
};
|
|
|
|
/* Global debug flag. */
|
|
|
|
int arc_debug;
|
|
|
|
/* List of "maintenance print arc" commands. */
|
|
|
|
static struct cmd_list_element *maintenance_print_arc_list = NULL;
|
|
|
|
/* XML target description features. */
|
|
|
|
static const char core_v2_feature_name[] = "org.gnu.gdb.arc.core.v2";
|
|
static const char
|
|
core_reduced_v2_feature_name[] = "org.gnu.gdb.arc.core-reduced.v2";
|
|
static const char
|
|
core_arcompact_feature_name[] = "org.gnu.gdb.arc.core.arcompact";
|
|
static const char aux_minimal_feature_name[] = "org.gnu.gdb.arc.aux-minimal";
|
|
|
|
/* XML target description known registers. */
|
|
|
|
static const char *const core_v2_register_names[] = {
|
|
"r0", "r1", "r2", "r3",
|
|
"r4", "r5", "r6", "r7",
|
|
"r8", "r9", "r10", "r11",
|
|
"r12", "r13", "r14", "r15",
|
|
"r16", "r17", "r18", "r19",
|
|
"r20", "r21", "r22", "r23",
|
|
"r24", "r25", "gp", "fp",
|
|
"sp", "ilink", "r30", "blink",
|
|
"r32", "r33", "r34", "r35",
|
|
"r36", "r37", "r38", "r39",
|
|
"r40", "r41", "r42", "r43",
|
|
"r44", "r45", "r46", "r47",
|
|
"r48", "r49", "r50", "r51",
|
|
"r52", "r53", "r54", "r55",
|
|
"r56", "r57", "accl", "acch",
|
|
"lp_count", "reserved", "limm", "pcl",
|
|
};
|
|
|
|
static const char *const aux_minimal_register_names[] = {
|
|
"pc", "status32",
|
|
};
|
|
|
|
static const char *const core_arcompact_register_names[] = {
|
|
"r0", "r1", "r2", "r3",
|
|
"r4", "r5", "r6", "r7",
|
|
"r8", "r9", "r10", "r11",
|
|
"r12", "r13", "r14", "r15",
|
|
"r16", "r17", "r18", "r19",
|
|
"r20", "r21", "r22", "r23",
|
|
"r24", "r25", "gp", "fp",
|
|
"sp", "ilink1", "ilink2", "blink",
|
|
"r32", "r33", "r34", "r35",
|
|
"r36", "r37", "r38", "r39",
|
|
"r40", "r41", "r42", "r43",
|
|
"r44", "r45", "r46", "r47",
|
|
"r48", "r49", "r50", "r51",
|
|
"r52", "r53", "r54", "r55",
|
|
"r56", "r57", "r58", "r59",
|
|
"lp_count", "reserved", "limm", "pcl",
|
|
};
|
|
|
|
static char *arc_disassembler_options = NULL;
|
|
|
|
/* Functions are sorted in the order as they are used in the
|
|
_initialize_arc_tdep (), which uses the same order as gdbarch.h. Static
|
|
functions are defined before the first invocation. */
|
|
|
|
/* Returns an unsigned value of OPERAND_NUM in instruction INSN.
|
|
For relative branch instructions returned value is an offset, not an actual
|
|
branch target. */
|
|
|
|
static ULONGEST
|
|
arc_insn_get_operand_value (const struct arc_instruction &insn,
|
|
unsigned int operand_num)
|
|
{
|
|
switch (insn.operands[operand_num].kind)
|
|
{
|
|
case ARC_OPERAND_KIND_LIMM:
|
|
gdb_assert (insn.limm_p);
|
|
return insn.limm_value;
|
|
case ARC_OPERAND_KIND_SHIMM:
|
|
return insn.operands[operand_num].value;
|
|
default:
|
|
/* Value in instruction is a register number. */
|
|
struct regcache *regcache = get_current_regcache ();
|
|
ULONGEST value;
|
|
regcache_cooked_read_unsigned (regcache,
|
|
insn.operands[operand_num].value,
|
|
&value);
|
|
return value;
|
|
}
|
|
}
|
|
|
|
/* Like arc_insn_get_operand_value, but returns a signed value. */
|
|
|
|
static LONGEST
|
|
arc_insn_get_operand_value_signed (const struct arc_instruction &insn,
|
|
unsigned int operand_num)
|
|
{
|
|
switch (insn.operands[operand_num].kind)
|
|
{
|
|
case ARC_OPERAND_KIND_LIMM:
|
|
gdb_assert (insn.limm_p);
|
|
/* Convert unsigned raw value to signed one. This assumes 2's
|
|
complement arithmetic, but so is the LONG_MIN value from generic
|
|
defs.h and that assumption is true for ARC. */
|
|
gdb_static_assert (sizeof (insn.limm_value) == sizeof (int));
|
|
return (((LONGEST) insn.limm_value) ^ INT_MIN) - INT_MIN;
|
|
case ARC_OPERAND_KIND_SHIMM:
|
|
/* Sign conversion has been done by binutils. */
|
|
return insn.operands[operand_num].value;
|
|
default:
|
|
/* Value in instruction is a register number. */
|
|
struct regcache *regcache = get_current_regcache ();
|
|
LONGEST value;
|
|
regcache_cooked_read_signed (regcache,
|
|
insn.operands[operand_num].value,
|
|
&value);
|
|
return value;
|
|
}
|
|
}
|
|
|
|
/* Get register with base address of memory operation. */
|
|
|
|
int
|
|
arc_insn_get_memory_base_reg (const struct arc_instruction &insn)
|
|
{
|
|
/* POP_S and PUSH_S have SP as an implicit argument in a disassembler. */
|
|
if (insn.insn_class == PUSH || insn.insn_class == POP)
|
|
return ARC_SP_REGNUM;
|
|
|
|
gdb_assert (insn.insn_class == LOAD || insn.insn_class == STORE);
|
|
|
|
/* Other instructions all have at least two operands: operand 0 is data,
|
|
operand 1 is address. Operand 2 is offset from address. However, see
|
|
comment to arc_instruction.operands - in some cases, third operand may be
|
|
missing, namely if it is 0. */
|
|
gdb_assert (insn.operands_count >= 2);
|
|
return insn.operands[1].value;
|
|
}
|
|
|
|
/* Get offset of a memory operation INSN. */
|
|
|
|
CORE_ADDR
|
|
arc_insn_get_memory_offset (const struct arc_instruction &insn)
|
|
{
|
|
/* POP_S and PUSH_S have offset as an implicit argument in a
|
|
disassembler. */
|
|
if (insn.insn_class == POP)
|
|
return 4;
|
|
else if (insn.insn_class == PUSH)
|
|
return -4;
|
|
|
|
gdb_assert (insn.insn_class == LOAD || insn.insn_class == STORE);
|
|
|
|
/* Other instructions all have at least two operands: operand 0 is data,
|
|
operand 1 is address. Operand 2 is offset from address. However, see
|
|
comment to arc_instruction.operands - in some cases, third operand may be
|
|
missing, namely if it is 0. */
|
|
if (insn.operands_count < 3)
|
|
return 0;
|
|
|
|
CORE_ADDR value = arc_insn_get_operand_value (insn, 2);
|
|
/* Handle scaling. */
|
|
if (insn.writeback_mode == ARC_WRITEBACK_AS)
|
|
{
|
|
/* Byte data size is not valid for AS. Halfword means shift by 1 bit.
|
|
Word and double word means shift by 2 bits. */
|
|
gdb_assert (insn.data_size_mode != ARC_SCALING_B);
|
|
if (insn.data_size_mode == ARC_SCALING_H)
|
|
value <<= 1;
|
|
else
|
|
value <<= 2;
|
|
}
|
|
return value;
|
|
}
|
|
|
|
CORE_ADDR
|
|
arc_insn_get_branch_target (const struct arc_instruction &insn)
|
|
{
|
|
gdb_assert (insn.is_control_flow);
|
|
|
|
/* BI [c]: PC = nextPC + (c << 2). */
|
|
if (insn.insn_class == BI)
|
|
{
|
|
ULONGEST reg_value = arc_insn_get_operand_value (insn, 0);
|
|
return arc_insn_get_linear_next_pc (insn) + (reg_value << 2);
|
|
}
|
|
/* BIH [c]: PC = nextPC + (c << 1). */
|
|
else if (insn.insn_class == BIH)
|
|
{
|
|
ULONGEST reg_value = arc_insn_get_operand_value (insn, 0);
|
|
return arc_insn_get_linear_next_pc (insn) + (reg_value << 1);
|
|
}
|
|
/* JLI and EI. */
|
|
/* JLI and EI depend on optional AUX registers. Not supported right now. */
|
|
else if (insn.insn_class == JLI)
|
|
{
|
|
fprintf_unfiltered (gdb_stderr,
|
|
"JLI_S instruction is not supported by the GDB.");
|
|
return 0;
|
|
}
|
|
else if (insn.insn_class == EI)
|
|
{
|
|
fprintf_unfiltered (gdb_stderr,
|
|
"EI_S instruction is not supported by the GDB.");
|
|
return 0;
|
|
}
|
|
/* LEAVE_S: PC = BLINK. */
|
|
else if (insn.insn_class == LEAVE)
|
|
{
|
|
struct regcache *regcache = get_current_regcache ();
|
|
ULONGEST value;
|
|
regcache_cooked_read_unsigned (regcache, ARC_BLINK_REGNUM, &value);
|
|
return value;
|
|
}
|
|
/* BBIT0/1, BRcc: PC = currentPC + operand. */
|
|
else if (insn.insn_class == BBIT0 || insn.insn_class == BBIT1
|
|
|| insn.insn_class == BRCC)
|
|
{
|
|
/* Most instructions has branch target as their sole argument. However
|
|
conditional brcc/bbit has it as a third operand. */
|
|
CORE_ADDR pcrel_addr = arc_insn_get_operand_value (insn, 2);
|
|
|
|
/* Offset is relative to the 4-byte aligned address of the current
|
|
instruction, hence last two bits should be truncated. */
|
|
return pcrel_addr + align_down (insn.address, 4);
|
|
}
|
|
/* B, Bcc, BL, BLcc, LP, LPcc: PC = currentPC + operand. */
|
|
else if (insn.insn_class == BRANCH || insn.insn_class == LOOP)
|
|
{
|
|
CORE_ADDR pcrel_addr = arc_insn_get_operand_value (insn, 0);
|
|
|
|
/* Offset is relative to the 4-byte aligned address of the current
|
|
instruction, hence last two bits should be truncated. */
|
|
return pcrel_addr + align_down (insn.address, 4);
|
|
}
|
|
/* J, Jcc, JL, JLcc: PC = operand. */
|
|
else if (insn.insn_class == JUMP)
|
|
{
|
|
/* All jumps are single-operand. */
|
|
return arc_insn_get_operand_value (insn, 0);
|
|
}
|
|
|
|
/* This is some new and unknown instruction. */
|
|
gdb_assert_not_reached ("Unknown branch instruction.");
|
|
}
|
|
|
|
/* Dump INSN into gdb_stdlog. */
|
|
|
|
void
|
|
arc_insn_dump (const struct arc_instruction &insn)
|
|
{
|
|
struct gdbarch *gdbarch = target_gdbarch ();
|
|
|
|
arc_print ("Dumping arc_instruction at %s\n",
|
|
paddress (gdbarch, insn.address));
|
|
arc_print ("\tlength = %u\n", insn.length);
|
|
|
|
if (!insn.valid)
|
|
{
|
|
arc_print ("\tThis is not a valid ARC instruction.\n");
|
|
return;
|
|
}
|
|
|
|
arc_print ("\tlength_with_limm = %u\n", insn.length + (insn.limm_p ? 4 : 0));
|
|
arc_print ("\tcc = 0x%x\n", insn.condition_code);
|
|
arc_print ("\tinsn_class = %u\n", insn.insn_class);
|
|
arc_print ("\tis_control_flow = %i\n", insn.is_control_flow);
|
|
arc_print ("\thas_delay_slot = %i\n", insn.has_delay_slot);
|
|
|
|
CORE_ADDR next_pc = arc_insn_get_linear_next_pc (insn);
|
|
arc_print ("\tlinear_next_pc = %s\n", paddress (gdbarch, next_pc));
|
|
|
|
if (insn.is_control_flow)
|
|
{
|
|
CORE_ADDR t = arc_insn_get_branch_target (insn);
|
|
arc_print ("\tbranch_target = %s\n", paddress (gdbarch, t));
|
|
}
|
|
|
|
arc_print ("\tlimm_p = %i\n", insn.limm_p);
|
|
if (insn.limm_p)
|
|
arc_print ("\tlimm_value = 0x%08x\n", insn.limm_value);
|
|
|
|
if (insn.insn_class == STORE || insn.insn_class == LOAD
|
|
|| insn.insn_class == PUSH || insn.insn_class == POP)
|
|
{
|
|
arc_print ("\twriteback_mode = %u\n", insn.writeback_mode);
|
|
arc_print ("\tdata_size_mode = %u\n", insn.data_size_mode);
|
|
arc_print ("\tmemory_base_register = %s\n",
|
|
gdbarch_register_name (gdbarch,
|
|
arc_insn_get_memory_base_reg (insn)));
|
|
/* get_memory_offset returns an unsigned CORE_ADDR, but treat it as a
|
|
LONGEST for a nicer representation. */
|
|
arc_print ("\taddr_offset = %s\n",
|
|
plongest (arc_insn_get_memory_offset (insn)));
|
|
}
|
|
|
|
arc_print ("\toperands_count = %u\n", insn.operands_count);
|
|
for (unsigned int i = 0; i < insn.operands_count; ++i)
|
|
{
|
|
int is_reg = (insn.operands[i].kind == ARC_OPERAND_KIND_REG);
|
|
|
|
arc_print ("\toperand[%u] = {\n", i);
|
|
arc_print ("\t\tis_reg = %i\n", is_reg);
|
|
if (is_reg)
|
|
arc_print ("\t\tregister = %s\n",
|
|
gdbarch_register_name (gdbarch, insn.operands[i].value));
|
|
/* Don't know if this value is signed or not, so print both
|
|
representations. This tends to look quite ugly, especially for big
|
|
numbers. */
|
|
arc_print ("\t\tunsigned value = %s\n",
|
|
pulongest (arc_insn_get_operand_value (insn, i)));
|
|
arc_print ("\t\tsigned value = %s\n",
|
|
plongest (arc_insn_get_operand_value_signed (insn, i)));
|
|
arc_print ("\t}\n");
|
|
}
|
|
}
|
|
|
|
CORE_ADDR
|
|
arc_insn_get_linear_next_pc (const struct arc_instruction &insn)
|
|
{
|
|
/* In ARC long immediate is always 4 bytes. */
|
|
return (insn.address + insn.length + (insn.limm_p ? 4 : 0));
|
|
}
|
|
|
|
/* Implement the "write_pc" gdbarch method.
|
|
|
|
In ARC PC register is a normal register so in most cases setting PC value
|
|
is a straightforward process: debugger just writes PC value. However it
|
|
gets trickier in case when current instruction is an instruction in delay
|
|
slot. In this case CPU will execute instruction at current PC value, then
|
|
will set PC to the current value of BTA register; also current instruction
|
|
cannot be branch/jump and some of the other instruction types. Thus if
|
|
debugger would try to just change PC value in this case, this instruction
|
|
will get executed, but then core will "jump" to the original branch target.
|
|
|
|
Whether current instruction is a delay-slot instruction or not is indicated
|
|
by DE bit in STATUS32 register indicates if current instruction is a delay
|
|
slot instruction. This bit is writable by debug host, which allows debug
|
|
host to prevent core from jumping after the delay slot instruction. It
|
|
also works in another direction: setting this bit will make core to treat
|
|
any current instructions as a delay slot instruction and to set PC to the
|
|
current value of BTA register.
|
|
|
|
To workaround issues with changing PC register while in delay slot
|
|
instruction, debugger should check for the STATUS32.DE bit and reset it if
|
|
it is set. No other change is required in this function. Most common
|
|
case, where this function might be required is calling inferior functions
|
|
from debugger. Generic GDB logic handles this pretty well: current values
|
|
of registers are stored, value of PC is changed (that is the job of this
|
|
function), and after inferior function is executed, GDB restores all
|
|
registers, include BTA and STATUS32, which also means that core is returned
|
|
to its original state of being halted on delay slot instructions.
|
|
|
|
This method is useless for ARC 600, because it doesn't have externally
|
|
exposed BTA register. In the case of ARC 600 it is impossible to restore
|
|
core to its state in all occasions thus core should never be halted (from
|
|
the perspective of debugger host) in the delay slot. */
|
|
|
|
static void
|
|
arc_write_pc (struct regcache *regcache, CORE_ADDR new_pc)
|
|
{
|
|
struct gdbarch *gdbarch = regcache->arch ();
|
|
|
|
if (arc_debug)
|
|
debug_printf ("arc: Writing PC, new value=%s\n",
|
|
paddress (gdbarch, new_pc));
|
|
|
|
regcache_cooked_write_unsigned (regcache, gdbarch_pc_regnum (gdbarch),
|
|
new_pc);
|
|
|
|
ULONGEST status32;
|
|
regcache_cooked_read_unsigned (regcache, gdbarch_ps_regnum (gdbarch),
|
|
&status32);
|
|
|
|
/* Mask for DE bit is 0x40. */
|
|
if (status32 & 0x40)
|
|
{
|
|
if (arc_debug)
|
|
{
|
|
debug_printf ("arc: Changing PC while in delay slot. Will "
|
|
"reset STATUS32.DE bit to zero. Value of STATUS32 "
|
|
"register is 0x%s\n",
|
|
phex (status32, ARC_REGISTER_SIZE));
|
|
}
|
|
|
|
/* Reset bit and write to the cache. */
|
|
status32 &= ~0x40;
|
|
regcache_cooked_write_unsigned (regcache, gdbarch_ps_regnum (gdbarch),
|
|
status32);
|
|
}
|
|
}
|
|
|
|
/* Implement the "virtual_frame_pointer" gdbarch method.
|
|
|
|
According to ABI the FP (r27) is used to point to the middle of the current
|
|
stack frame, just below the saved FP and before local variables, register
|
|
spill area and outgoing args. However for optimization levels above O2 and
|
|
in any case in leaf functions, the frame pointer is usually not set at all.
|
|
The exception being when handling nested functions.
|
|
|
|
We use this function to return a "virtual" frame pointer, marking the start
|
|
of the current stack frame as a register-offset pair. If the FP is not
|
|
being used, then it should return SP, with an offset of the frame size.
|
|
|
|
The current implementation doesn't actually know the frame size, nor
|
|
whether the FP is actually being used, so for now we just return SP and an
|
|
offset of zero. This is no worse than other architectures, but is needed
|
|
to avoid assertion failures.
|
|
|
|
TODO: Can we determine the frame size to get a correct offset?
|
|
|
|
PC is a program counter where we need the virtual FP. REG_PTR is the base
|
|
register used for the virtual FP. OFFSET_PTR is the offset used for the
|
|
virtual FP. */
|
|
|
|
static void
|
|
arc_virtual_frame_pointer (struct gdbarch *gdbarch, CORE_ADDR pc,
|
|
int *reg_ptr, LONGEST *offset_ptr)
|
|
{
|
|
*reg_ptr = gdbarch_sp_regnum (gdbarch);
|
|
*offset_ptr = 0;
|
|
}
|
|
|
|
/* Implement the "push_dummy_call" gdbarch method.
|
|
|
|
Stack Frame Layout
|
|
|
|
This shows the layout of the stack frame for the general case of a
|
|
function call; a given function might not have a variable number of
|
|
arguments or local variables, or might not save any registers, so it would
|
|
not have the corresponding frame areas. Additionally, a leaf function
|
|
(i.e. one which calls no other functions) does not need to save the
|
|
contents of the BLINK register (which holds its return address), and a
|
|
function might not have a frame pointer.
|
|
|
|
The stack grows downward, so SP points below FP in memory; SP always
|
|
points to the last used word on the stack, not the first one.
|
|
|
|
| | |
|
|
| arg word N | | caller's
|
|
| : | | frame
|
|
| arg word 10 | |
|
|
| arg word 9 | |
|
|
old SP ---> +-----------------------+ --+
|
|
| | |
|
|
| callee-saved | |
|
|
| registers | |
|
|
| including fp, blink | |
|
|
| | | callee's
|
|
new FP ---> +-----------------------+ | frame
|
|
| | |
|
|
| local | |
|
|
| variables | |
|
|
| | |
|
|
| register | |
|
|
| spill area | |
|
|
| | |
|
|
| outgoing args | |
|
|
| | |
|
|
new SP ---> +-----------------------+ --+
|
|
| |
|
|
| unused |
|
|
| |
|
|
|
|
|
|
|
|
V
|
|
downwards
|
|
|
|
The list of arguments to be passed to a function is considered to be a
|
|
sequence of _N_ words (as though all the parameters were stored in order in
|
|
memory with each parameter occupying an integral number of words). Words
|
|
1..8 are passed in registers 0..7; if the function has more than 8 words of
|
|
arguments then words 9..@em N are passed on the stack in the caller's frame.
|
|
|
|
If the function has a variable number of arguments, e.g. it has a form such
|
|
as `function (p1, p2, ...);' and _P_ words are required to hold the values
|
|
of the named parameters (which are passed in registers 0..@em P -1), then
|
|
the remaining 8 - _P_ words passed in registers _P_..7 are spilled into the
|
|
top of the frame so that the anonymous parameter words occupy a continuous
|
|
region.
|
|
|
|
Any arguments are already in target byte order. We just need to store
|
|
them!
|
|
|
|
BP_ADDR is the return address where breakpoint must be placed. NARGS is
|
|
the number of arguments to the function. ARGS is the arguments values (in
|
|
target byte order). SP is the Current value of SP register. STRUCT_RETURN
|
|
is TRUE if structures are returned by the function. STRUCT_ADDR is the
|
|
hidden address for returning a struct. Returns SP of a new frame. */
|
|
|
|
static CORE_ADDR
|
|
arc_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
|
|
struct regcache *regcache, CORE_ADDR bp_addr, int nargs,
|
|
struct value **args, CORE_ADDR sp,
|
|
function_call_return_method return_method,
|
|
CORE_ADDR struct_addr)
|
|
{
|
|
if (arc_debug)
|
|
debug_printf ("arc: push_dummy_call (nargs = %d)\n", nargs);
|
|
|
|
int arg_reg = ARC_FIRST_ARG_REGNUM;
|
|
|
|
/* Push the return address. */
|
|
regcache_cooked_write_unsigned (regcache, ARC_BLINK_REGNUM, bp_addr);
|
|
|
|
/* Are we returning a value using a structure return instead of a normal
|
|
value return? If so, struct_addr is the address of the reserved space for
|
|
the return structure to be written on the stack, and that address is
|
|
passed to that function as a hidden first argument. */
|
|
if (return_method == return_method_struct)
|
|
{
|
|
/* Pass the return address in the first argument register. */
|
|
regcache_cooked_write_unsigned (regcache, arg_reg, struct_addr);
|
|
|
|
if (arc_debug)
|
|
debug_printf ("arc: struct return address %s passed in R%d",
|
|
print_core_address (gdbarch, struct_addr), arg_reg);
|
|
|
|
arg_reg++;
|
|
}
|
|
|
|
if (nargs > 0)
|
|
{
|
|
unsigned int total_space = 0;
|
|
|
|
/* How much space do the arguments occupy in total? Must round each
|
|
argument's size up to an integral number of words. */
|
|
for (int i = 0; i < nargs; i++)
|
|
{
|
|
unsigned int len = TYPE_LENGTH (value_type (args[i]));
|
|
unsigned int space = align_up (len, 4);
|
|
|
|
total_space += space;
|
|
|
|
if (arc_debug)
|
|
debug_printf ("arc: arg %d: %u bytes -> %u\n", i, len, space);
|
|
}
|
|
|
|
/* Allocate a buffer to hold a memory image of the arguments. */
|
|
gdb_byte *memory_image = XCNEWVEC (gdb_byte, total_space);
|
|
|
|
/* Now copy all of the arguments into the buffer, correctly aligned. */
|
|
gdb_byte *data = memory_image;
|
|
for (int i = 0; i < nargs; i++)
|
|
{
|
|
unsigned int len = TYPE_LENGTH (value_type (args[i]));
|
|
unsigned int space = align_up (len, 4);
|
|
|
|
memcpy (data, value_contents (args[i]), (size_t) len);
|
|
if (arc_debug)
|
|
debug_printf ("arc: copying arg %d, val 0x%08x, len %d to mem\n",
|
|
i, *((int *) value_contents (args[i])), len);
|
|
|
|
data += space;
|
|
}
|
|
|
|
/* Now load as much as possible of the memory image into registers. */
|
|
data = memory_image;
|
|
while (arg_reg <= ARC_LAST_ARG_REGNUM)
|
|
{
|
|
if (arc_debug)
|
|
debug_printf ("arc: passing 0x%02x%02x%02x%02x in register R%d\n",
|
|
data[0], data[1], data[2], data[3], arg_reg);
|
|
|
|
/* Note we don't use write_unsigned here, since that would convert
|
|
the byte order, but we are already in the correct byte order. */
|
|
regcache->cooked_write (arg_reg, data);
|
|
|
|
data += ARC_REGISTER_SIZE;
|
|
total_space -= ARC_REGISTER_SIZE;
|
|
|
|
/* All the data is now in registers. */
|
|
if (total_space == 0)
|
|
break;
|
|
|
|
arg_reg++;
|
|
}
|
|
|
|
/* If there is any data left, push it onto the stack (in a single write
|
|
operation). */
|
|
if (total_space > 0)
|
|
{
|
|
if (arc_debug)
|
|
debug_printf ("arc: passing %d bytes on stack\n", total_space);
|
|
|
|
sp -= total_space;
|
|
write_memory (sp, data, (int) total_space);
|
|
}
|
|
|
|
xfree (memory_image);
|
|
}
|
|
|
|
/* Finally, update the SP register. */
|
|
regcache_cooked_write_unsigned (regcache, gdbarch_sp_regnum (gdbarch), sp);
|
|
|
|
return sp;
|
|
}
|
|
|
|
/* Implement the "push_dummy_code" gdbarch method.
|
|
|
|
We don't actually push any code. We just identify where a breakpoint can
|
|
be inserted to which we are can return and the resume address where we
|
|
should be called.
|
|
|
|
ARC does not necessarily have an executable stack, so we can't put the
|
|
return breakpoint there. Instead we put it at the entry point of the
|
|
function. This means the SP is unchanged.
|
|
|
|
SP is a current stack pointer FUNADDR is an address of the function to be
|
|
called. ARGS is arguments to pass. NARGS is a number of args to pass.
|
|
VALUE_TYPE is a type of value returned. REAL_PC is a resume address when
|
|
the function is called. BP_ADDR is an address where breakpoint should be
|
|
set. Returns the updated stack pointer. */
|
|
|
|
static CORE_ADDR
|
|
arc_push_dummy_code (struct gdbarch *gdbarch, CORE_ADDR sp, CORE_ADDR funaddr,
|
|
struct value **args, int nargs, struct type *value_type,
|
|
CORE_ADDR *real_pc, CORE_ADDR *bp_addr,
|
|
struct regcache *regcache)
|
|
{
|
|
*real_pc = funaddr;
|
|
*bp_addr = entry_point_address ();
|
|
return sp;
|
|
}
|
|
|
|
/* Implement the "cannot_fetch_register" gdbarch method. */
|
|
|
|
static int
|
|
arc_cannot_fetch_register (struct gdbarch *gdbarch, int regnum)
|
|
{
|
|
/* Assume that register is readable if it is unknown. LIMM and RESERVED are
|
|
not real registers, but specific register numbers. They are available as
|
|
regnums to align architectural register numbers with GDB internal regnums,
|
|
but they shouldn't appear in target descriptions generated by
|
|
GDB-servers. */
|
|
switch (regnum)
|
|
{
|
|
case ARC_RESERVED_REGNUM:
|
|
case ARC_LIMM_REGNUM:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
/* Implement the "cannot_store_register" gdbarch method. */
|
|
|
|
static int
|
|
arc_cannot_store_register (struct gdbarch *gdbarch, int regnum)
|
|
{
|
|
/* Assume that register is writable if it is unknown. See comment in
|
|
arc_cannot_fetch_register about LIMM and RESERVED. */
|
|
switch (regnum)
|
|
{
|
|
case ARC_RESERVED_REGNUM:
|
|
case ARC_LIMM_REGNUM:
|
|
case ARC_PCL_REGNUM:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
/* Get the return value of a function from the registers/memory used to
|
|
return it, according to the convention used by the ABI - 4-bytes values are
|
|
in the R0, while 8-byte values are in the R0-R1.
|
|
|
|
TODO: This implementation ignores the case of "complex double", where
|
|
according to ABI, value is returned in the R0-R3 registers.
|
|
|
|
TYPE is a returned value's type. VALBUF is a buffer for the returned
|
|
value. */
|
|
|
|
static void
|
|
arc_extract_return_value (struct gdbarch *gdbarch, struct type *type,
|
|
struct regcache *regcache, gdb_byte *valbuf)
|
|
{
|
|
unsigned int len = TYPE_LENGTH (type);
|
|
|
|
if (arc_debug)
|
|
debug_printf ("arc: extract_return_value\n");
|
|
|
|
if (len <= ARC_REGISTER_SIZE)
|
|
{
|
|
ULONGEST val;
|
|
|
|
/* Get the return value from one register. */
|
|
regcache_cooked_read_unsigned (regcache, ARC_R0_REGNUM, &val);
|
|
store_unsigned_integer (valbuf, (int) len,
|
|
gdbarch_byte_order (gdbarch), val);
|
|
|
|
if (arc_debug)
|
|
debug_printf ("arc: returning 0x%s\n", phex (val, ARC_REGISTER_SIZE));
|
|
}
|
|
else if (len <= ARC_REGISTER_SIZE * 2)
|
|
{
|
|
ULONGEST low, high;
|
|
|
|
/* Get the return value from two registers. */
|
|
regcache_cooked_read_unsigned (regcache, ARC_R0_REGNUM, &low);
|
|
regcache_cooked_read_unsigned (regcache, ARC_R1_REGNUM, &high);
|
|
|
|
store_unsigned_integer (valbuf, ARC_REGISTER_SIZE,
|
|
gdbarch_byte_order (gdbarch), low);
|
|
store_unsigned_integer (valbuf + ARC_REGISTER_SIZE,
|
|
(int) len - ARC_REGISTER_SIZE,
|
|
gdbarch_byte_order (gdbarch), high);
|
|
|
|
if (arc_debug)
|
|
debug_printf ("arc: returning 0x%s%s\n",
|
|
phex (high, ARC_REGISTER_SIZE),
|
|
phex (low, ARC_REGISTER_SIZE));
|
|
}
|
|
else
|
|
error (_("arc: extract_return_value: type length %u too large"), len);
|
|
}
|
|
|
|
|
|
/* Store the return value of a function into the registers/memory used to
|
|
return it, according to the convention used by the ABI.
|
|
|
|
TODO: This implementation ignores the case of "complex double", where
|
|
according to ABI, value is returned in the R0-R3 registers.
|
|
|
|
TYPE is a returned value's type. VALBUF is a buffer with the value to
|
|
return. */
|
|
|
|
static void
|
|
arc_store_return_value (struct gdbarch *gdbarch, struct type *type,
|
|
struct regcache *regcache, const gdb_byte *valbuf)
|
|
{
|
|
unsigned int len = TYPE_LENGTH (type);
|
|
|
|
if (arc_debug)
|
|
debug_printf ("arc: store_return_value\n");
|
|
|
|
if (len <= ARC_REGISTER_SIZE)
|
|
{
|
|
ULONGEST val;
|
|
|
|
/* Put the return value into one register. */
|
|
val = extract_unsigned_integer (valbuf, (int) len,
|
|
gdbarch_byte_order (gdbarch));
|
|
regcache_cooked_write_unsigned (regcache, ARC_R0_REGNUM, val);
|
|
|
|
if (arc_debug)
|
|
debug_printf ("arc: storing 0x%s\n", phex (val, ARC_REGISTER_SIZE));
|
|
}
|
|
else if (len <= ARC_REGISTER_SIZE * 2)
|
|
{
|
|
ULONGEST low, high;
|
|
|
|
/* Put the return value into two registers. */
|
|
low = extract_unsigned_integer (valbuf, ARC_REGISTER_SIZE,
|
|
gdbarch_byte_order (gdbarch));
|
|
high = extract_unsigned_integer (valbuf + ARC_REGISTER_SIZE,
|
|
(int) len - ARC_REGISTER_SIZE,
|
|
gdbarch_byte_order (gdbarch));
|
|
|
|
regcache_cooked_write_unsigned (regcache, ARC_R0_REGNUM, low);
|
|
regcache_cooked_write_unsigned (regcache, ARC_R1_REGNUM, high);
|
|
|
|
if (arc_debug)
|
|
debug_printf ("arc: storing 0x%s%s\n",
|
|
phex (high, ARC_REGISTER_SIZE),
|
|
phex (low, ARC_REGISTER_SIZE));
|
|
}
|
|
else
|
|
error (_("arc_store_return_value: type length too large."));
|
|
}
|
|
|
|
/* Implement the "get_longjmp_target" gdbarch method. */
|
|
|
|
static int
|
|
arc_get_longjmp_target (struct frame_info *frame, CORE_ADDR *pc)
|
|
{
|
|
if (arc_debug)
|
|
debug_printf ("arc: get_longjmp_target\n");
|
|
|
|
struct gdbarch *gdbarch = get_frame_arch (frame);
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
int pc_offset = tdep->jb_pc * ARC_REGISTER_SIZE;
|
|
gdb_byte buf[ARC_REGISTER_SIZE];
|
|
CORE_ADDR jb_addr = get_frame_register_unsigned (frame, ARC_FIRST_ARG_REGNUM);
|
|
|
|
if (target_read_memory (jb_addr + pc_offset, buf, ARC_REGISTER_SIZE))
|
|
return 0; /* Failed to read from memory. */
|
|
|
|
*pc = extract_unsigned_integer (buf, ARC_REGISTER_SIZE,
|
|
gdbarch_byte_order (gdbarch));
|
|
return 1;
|
|
}
|
|
|
|
/* Implement the "return_value" gdbarch method. */
|
|
|
|
static enum return_value_convention
|
|
arc_return_value (struct gdbarch *gdbarch, struct value *function,
|
|
struct type *valtype, struct regcache *regcache,
|
|
gdb_byte *readbuf, const gdb_byte *writebuf)
|
|
{
|
|
/* If the return type is a struct, or a union, or would occupy more than two
|
|
registers, the ABI uses the "struct return convention": the calling
|
|
function passes a hidden first parameter to the callee (in R0). That
|
|
parameter is the address at which the value being returned should be
|
|
stored. Otherwise, the result is returned in registers. */
|
|
int is_struct_return = (TYPE_CODE (valtype) == TYPE_CODE_STRUCT
|
|
|| TYPE_CODE (valtype) == TYPE_CODE_UNION
|
|
|| TYPE_LENGTH (valtype) > 2 * ARC_REGISTER_SIZE);
|
|
|
|
if (arc_debug)
|
|
debug_printf ("arc: return_value (readbuf = %s, writebuf = %s)\n",
|
|
host_address_to_string (readbuf),
|
|
host_address_to_string (writebuf));
|
|
|
|
if (writebuf != NULL)
|
|
{
|
|
/* Case 1. GDB should not ask us to set a struct return value: it
|
|
should know the struct return location and write the value there
|
|
itself. */
|
|
gdb_assert (!is_struct_return);
|
|
arc_store_return_value (gdbarch, valtype, regcache, writebuf);
|
|
}
|
|
else if (readbuf != NULL)
|
|
{
|
|
/* Case 2. GDB should not ask us to get a struct return value: it
|
|
should know the struct return location and read the value from there
|
|
itself. */
|
|
gdb_assert (!is_struct_return);
|
|
arc_extract_return_value (gdbarch, valtype, regcache, readbuf);
|
|
}
|
|
|
|
return (is_struct_return
|
|
? RETURN_VALUE_STRUCT_CONVENTION
|
|
: RETURN_VALUE_REGISTER_CONVENTION);
|
|
}
|
|
|
|
/* Return the base address of the frame. For ARC, the base address is the
|
|
frame pointer. */
|
|
|
|
static CORE_ADDR
|
|
arc_frame_base_address (struct frame_info *this_frame, void **prologue_cache)
|
|
{
|
|
return (CORE_ADDR) get_frame_register_unsigned (this_frame, ARC_FP_REGNUM);
|
|
}
|
|
|
|
/* Helper function that returns valid pv_t for an instruction operand:
|
|
either a register or a constant. */
|
|
|
|
static pv_t
|
|
arc_pv_get_operand (pv_t *regs, const struct arc_instruction &insn, int operand)
|
|
{
|
|
if (insn.operands[operand].kind == ARC_OPERAND_KIND_REG)
|
|
return regs[insn.operands[operand].value];
|
|
else
|
|
return pv_constant (arc_insn_get_operand_value (insn, operand));
|
|
}
|
|
|
|
/* Determine whether the given disassembled instruction may be part of a
|
|
function prologue. If it is, the information in the frame unwind cache will
|
|
be updated. */
|
|
|
|
static bool
|
|
arc_is_in_prologue (struct gdbarch *gdbarch, const struct arc_instruction &insn,
|
|
pv_t *regs, struct pv_area *stack)
|
|
{
|
|
/* It might be that currently analyzed address doesn't contain an
|
|
instruction, hence INSN is not valid. It likely means that address points
|
|
to a data, non-initialized memory, or middle of a 32-bit instruction. In
|
|
practice this may happen if GDB connects to a remote target that has
|
|
non-zeroed memory. GDB would read PC value and would try to analyze
|
|
prologue, but there is no guarantee that memory contents at the address
|
|
specified in PC is address is a valid instruction. There is not much that
|
|
that can be done about that. */
|
|
if (!insn.valid)
|
|
return false;
|
|
|
|
/* Branch/jump or a predicated instruction. */
|
|
if (insn.is_control_flow || insn.condition_code != ARC_CC_AL)
|
|
return false;
|
|
|
|
/* Store of some register. May or may not update base address register. */
|
|
if (insn.insn_class == STORE || insn.insn_class == PUSH)
|
|
{
|
|
/* There is definetely at least one operand - register/value being
|
|
stored. */
|
|
gdb_assert (insn.operands_count > 0);
|
|
|
|
/* Store at some constant address. */
|
|
if (insn.operands_count > 1
|
|
&& insn.operands[1].kind != ARC_OPERAND_KIND_REG)
|
|
return false;
|
|
|
|
/* Writeback modes:
|
|
Mode Address used Writeback value
|
|
--------------------------------------------------
|
|
No reg + offset no
|
|
A/AW reg + offset reg + offset
|
|
AB reg reg + offset
|
|
AS reg + (offset << scaling) no
|
|
|
|
"PUSH reg" is an alias to "ST.AW reg, [SP, -4]" encoding. However
|
|
16-bit PUSH_S is a distinct instruction encoding, where offset and
|
|
base register are implied through opcode. */
|
|
|
|
/* Register with base memory address. */
|
|
int base_reg = arc_insn_get_memory_base_reg (insn);
|
|
|
|
/* Address where to write. arc_insn_get_memory_offset returns scaled
|
|
value for ARC_WRITEBACK_AS. */
|
|
pv_t addr;
|
|
if (insn.writeback_mode == ARC_WRITEBACK_AB)
|
|
addr = regs[base_reg];
|
|
else
|
|
addr = pv_add_constant (regs[base_reg],
|
|
arc_insn_get_memory_offset (insn));
|
|
|
|
if (stack->store_would_trash (addr))
|
|
return false;
|
|
|
|
if (insn.data_size_mode != ARC_SCALING_D)
|
|
{
|
|
/* Find the value being stored. */
|
|
pv_t store_value = arc_pv_get_operand (regs, insn, 0);
|
|
|
|
/* What is the size of a the stored value? */
|
|
CORE_ADDR size;
|
|
if (insn.data_size_mode == ARC_SCALING_B)
|
|
size = 1;
|
|
else if (insn.data_size_mode == ARC_SCALING_H)
|
|
size = 2;
|
|
else
|
|
size = ARC_REGISTER_SIZE;
|
|
|
|
stack->store (addr, size, store_value);
|
|
}
|
|
else
|
|
{
|
|
if (insn.operands[0].kind == ARC_OPERAND_KIND_REG)
|
|
{
|
|
/* If this is a double store, than write N+1 register as well. */
|
|
pv_t store_value1 = regs[insn.operands[0].value];
|
|
pv_t store_value2 = regs[insn.operands[0].value + 1];
|
|
stack->store (addr, ARC_REGISTER_SIZE, store_value1);
|
|
stack->store (pv_add_constant (addr, ARC_REGISTER_SIZE),
|
|
ARC_REGISTER_SIZE, store_value2);
|
|
}
|
|
else
|
|
{
|
|
pv_t store_value
|
|
= pv_constant (arc_insn_get_operand_value (insn, 0));
|
|
stack->store (addr, ARC_REGISTER_SIZE * 2, store_value);
|
|
}
|
|
}
|
|
|
|
/* Is base register updated? */
|
|
if (insn.writeback_mode == ARC_WRITEBACK_A
|
|
|| insn.writeback_mode == ARC_WRITEBACK_AB)
|
|
regs[base_reg] = pv_add_constant (regs[base_reg],
|
|
arc_insn_get_memory_offset (insn));
|
|
|
|
return true;
|
|
}
|
|
else if (insn.insn_class == MOVE)
|
|
{
|
|
gdb_assert (insn.operands_count == 2);
|
|
|
|
/* Destination argument can be "0", so nothing will happen. */
|
|
if (insn.operands[0].kind == ARC_OPERAND_KIND_REG)
|
|
{
|
|
int dst_regnum = insn.operands[0].value;
|
|
regs[dst_regnum] = arc_pv_get_operand (regs, insn, 1);
|
|
}
|
|
return true;
|
|
}
|
|
else if (insn.insn_class == SUB)
|
|
{
|
|
gdb_assert (insn.operands_count == 3);
|
|
|
|
/* SUB 0,b,c. */
|
|
if (insn.operands[0].kind != ARC_OPERAND_KIND_REG)
|
|
return true;
|
|
|
|
int dst_regnum = insn.operands[0].value;
|
|
regs[dst_regnum] = pv_subtract (arc_pv_get_operand (regs, insn, 1),
|
|
arc_pv_get_operand (regs, insn, 2));
|
|
return true;
|
|
}
|
|
else if (insn.insn_class == ENTER)
|
|
{
|
|
/* ENTER_S is a prologue-in-instruction - it saves all callee-saved
|
|
registers according to given arguments thus greatly reducing code
|
|
size. Which registers will be actually saved depends on arguments.
|
|
|
|
ENTER_S {R13-...,FP,BLINK} stores registers in following order:
|
|
|
|
new SP ->
|
|
BLINK
|
|
R13
|
|
R14
|
|
R15
|
|
...
|
|
FP
|
|
old SP ->
|
|
|
|
There are up to three arguments for this opcode, as presented by ARC
|
|
disassembler:
|
|
1) amount of general-purpose registers to be saved - this argument is
|
|
always present even when it is 0;
|
|
2) FP register number (27) if FP has to be stored, otherwise argument
|
|
is not present;
|
|
3) BLINK register number (31) if BLINK has to be stored, otherwise
|
|
argument is not present. If both FP and BLINK are stored, then FP
|
|
is present before BLINK in argument list. */
|
|
gdb_assert (insn.operands_count > 0);
|
|
|
|
int regs_saved = arc_insn_get_operand_value (insn, 0);
|
|
|
|
bool is_fp_saved;
|
|
if (insn.operands_count > 1)
|
|
is_fp_saved = (insn.operands[1].value == ARC_FP_REGNUM);
|
|
else
|
|
is_fp_saved = false;
|
|
|
|
bool is_blink_saved;
|
|
if (insn.operands_count > 1)
|
|
is_blink_saved = (insn.operands[insn.operands_count - 1].value
|
|
== ARC_BLINK_REGNUM);
|
|
else
|
|
is_blink_saved = false;
|
|
|
|
/* Amount of bytes to be allocated to store specified registers. */
|
|
CORE_ADDR st_size = ((regs_saved + is_fp_saved + is_blink_saved)
|
|
* ARC_REGISTER_SIZE);
|
|
pv_t new_sp = pv_add_constant (regs[ARC_SP_REGNUM], -st_size);
|
|
|
|
/* Assume that if the last register (closest to new SP) can be written,
|
|
then it is possible to write all of them. */
|
|
if (stack->store_would_trash (new_sp))
|
|
return false;
|
|
|
|
/* Current store address. */
|
|
pv_t addr = regs[ARC_SP_REGNUM];
|
|
|
|
if (is_fp_saved)
|
|
{
|
|
addr = pv_add_constant (addr, -ARC_REGISTER_SIZE);
|
|
stack->store (addr, ARC_REGISTER_SIZE, regs[ARC_FP_REGNUM]);
|
|
}
|
|
|
|
/* Registers are stored in backward order: from GP (R26) to R13. */
|
|
for (int i = ARC_R13_REGNUM + regs_saved - 1; i >= ARC_R13_REGNUM; i--)
|
|
{
|
|
addr = pv_add_constant (addr, -ARC_REGISTER_SIZE);
|
|
stack->store (addr, ARC_REGISTER_SIZE, regs[i]);
|
|
}
|
|
|
|
if (is_blink_saved)
|
|
{
|
|
addr = pv_add_constant (addr, -ARC_REGISTER_SIZE);
|
|
stack->store (addr, ARC_REGISTER_SIZE,
|
|
regs[ARC_BLINK_REGNUM]);
|
|
}
|
|
|
|
gdb_assert (pv_is_identical (addr, new_sp));
|
|
|
|
regs[ARC_SP_REGNUM] = new_sp;
|
|
|
|
if (is_fp_saved)
|
|
regs[ARC_FP_REGNUM] = regs[ARC_SP_REGNUM];
|
|
|
|
return true;
|
|
}
|
|
|
|
/* Some other architectures, like nds32 or arm, try to continue as far as
|
|
possible when building a prologue cache (as opposed to when skipping
|
|
prologue), so that cache will be as full as possible. However current
|
|
code for ARC doesn't recognize some instructions that may modify SP, like
|
|
ADD, AND, OR, etc, hence there is no way to guarantee that SP wasn't
|
|
clobbered by the skipped instruction. Potential existence of extension
|
|
instruction, which may do anything they want makes this even more complex,
|
|
so it is just better to halt on a first unrecognized instruction. */
|
|
|
|
return false;
|
|
}
|
|
|
|
/* Copy of gdb_buffered_insn_length_fprintf from disasm.c. */
|
|
|
|
static int ATTRIBUTE_PRINTF (2, 3)
|
|
arc_fprintf_disasm (void *stream, const char *format, ...)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
struct disassemble_info
|
|
arc_disassemble_info (struct gdbarch *gdbarch)
|
|
{
|
|
struct disassemble_info di;
|
|
init_disassemble_info (&di, &null_stream, arc_fprintf_disasm);
|
|
di.arch = gdbarch_bfd_arch_info (gdbarch)->arch;
|
|
di.mach = gdbarch_bfd_arch_info (gdbarch)->mach;
|
|
di.endian = gdbarch_byte_order (gdbarch);
|
|
di.read_memory_func = [](bfd_vma memaddr, gdb_byte *myaddr,
|
|
unsigned int len, struct disassemble_info *info)
|
|
{
|
|
return target_read_code (memaddr, myaddr, len);
|
|
};
|
|
return di;
|
|
}
|
|
|
|
/* Analyze the prologue and update the corresponding frame cache for the frame
|
|
unwinder for unwinding frames that doesn't have debug info. In such
|
|
situation GDB attempts to parse instructions in the prologue to understand
|
|
where each register is saved.
|
|
|
|
If CACHE is not NULL, then it will be filled with information about saved
|
|
registers.
|
|
|
|
There are several variations of prologue which GDB may encounter. "Full"
|
|
prologue looks like this:
|
|
|
|
sub sp,sp,<imm> ; Space for variadic arguments.
|
|
push blink ; Store return address.
|
|
push r13 ; Store callee saved registers (up to R26/GP).
|
|
push r14
|
|
push fp ; Store frame pointer.
|
|
mov fp,sp ; Update frame pointer.
|
|
sub sp,sp,<imm> ; Create space for local vars on the stack.
|
|
|
|
Depending on compiler options lots of things may change:
|
|
|
|
1) BLINK is not saved in leaf functions.
|
|
2) Frame pointer is not saved and updated if -fomit-frame-pointer is used.
|
|
3) 16-bit versions of those instructions may be used.
|
|
4) Instead of a sequence of several push'es, compiler may instead prefer to
|
|
do one subtract on stack pointer and then store registers using normal
|
|
store, that doesn't update SP. Like this:
|
|
|
|
|
|
sub sp,sp,8 ; Create space for callee-saved registers.
|
|
st r13,[sp,4] ; Store callee saved registers (up to R26/GP).
|
|
st r14,[sp,0]
|
|
|
|
5) ENTER_S instruction can encode most of prologue sequence in one
|
|
instruction (except for those subtracts for variadic arguments and local
|
|
variables).
|
|
6) GCC may use "millicode" functions from libgcc to store callee-saved
|
|
registers with minimal code-size requirements. This function currently
|
|
doesn't support this.
|
|
|
|
ENTRYPOINT is a function entry point where prologue starts.
|
|
|
|
LIMIT_PC is a maximum possible end address of prologue (meaning address
|
|
of first instruction after the prologue). It might also point to the middle
|
|
of prologue if execution has been stopped by the breakpoint at this address
|
|
- in this case debugger should analyze prologue only up to this address,
|
|
because further instructions haven't been executed yet.
|
|
|
|
Returns address of the first instruction after the prologue. */
|
|
|
|
static CORE_ADDR
|
|
arc_analyze_prologue (struct gdbarch *gdbarch, const CORE_ADDR entrypoint,
|
|
const CORE_ADDR limit_pc, struct arc_frame_cache *cache)
|
|
{
|
|
if (arc_debug)
|
|
debug_printf ("arc: analyze_prologue (entrypoint=%s, limit_pc=%s)\n",
|
|
paddress (gdbarch, entrypoint),
|
|
paddress (gdbarch, limit_pc));
|
|
|
|
/* Prologue values. Only core registers can be stored. */
|
|
pv_t regs[ARC_LAST_CORE_REGNUM + 1];
|
|
for (int i = 0; i <= ARC_LAST_CORE_REGNUM; i++)
|
|
regs[i] = pv_register (i, 0);
|
|
pv_area stack (ARC_SP_REGNUM, gdbarch_addr_bit (gdbarch));
|
|
|
|
CORE_ADDR current_prologue_end = entrypoint;
|
|
|
|
/* Look at each instruction in the prologue. */
|
|
while (current_prologue_end < limit_pc)
|
|
{
|
|
struct arc_instruction insn;
|
|
struct disassemble_info di = arc_disassemble_info (gdbarch);
|
|
arc_insn_decode (current_prologue_end, &di, arc_delayed_print_insn,
|
|
&insn);
|
|
|
|
if (arc_debug >= 2)
|
|
arc_insn_dump (insn);
|
|
|
|
/* If this instruction is in the prologue, fields in the cache will be
|
|
updated, and the saved registers mask may be updated. */
|
|
if (!arc_is_in_prologue (gdbarch, insn, regs, &stack))
|
|
{
|
|
/* Found an instruction that is not in the prologue. */
|
|
if (arc_debug)
|
|
debug_printf ("arc: End of prologue reached at address %s\n",
|
|
paddress (gdbarch, insn.address));
|
|
break;
|
|
}
|
|
|
|
current_prologue_end = arc_insn_get_linear_next_pc (insn);
|
|
}
|
|
|
|
if (cache != NULL)
|
|
{
|
|
/* Figure out if it is a frame pointer or just a stack pointer. */
|
|
if (pv_is_register (regs[ARC_FP_REGNUM], ARC_SP_REGNUM))
|
|
{
|
|
cache->frame_base_reg = ARC_FP_REGNUM;
|
|
cache->frame_base_offset = -regs[ARC_FP_REGNUM].k;
|
|
}
|
|
else
|
|
{
|
|
cache->frame_base_reg = ARC_SP_REGNUM;
|
|
cache->frame_base_offset = -regs[ARC_SP_REGNUM].k;
|
|
}
|
|
|
|
/* Assign offset from old SP to all saved registers. */
|
|
for (int i = 0; i <= ARC_LAST_CORE_REGNUM; i++)
|
|
{
|
|
CORE_ADDR offset;
|
|
if (stack.find_reg (gdbarch, i, &offset))
|
|
cache->saved_regs[i].addr = offset;
|
|
}
|
|
}
|
|
|
|
return current_prologue_end;
|
|
}
|
|
|
|
/* Estimated maximum prologue length in bytes. This should include:
|
|
1) Store instruction for each callee-saved register (R25 - R13 + 1)
|
|
2) Two instructions for FP
|
|
3) One for BLINK
|
|
4) Three substract instructions for SP (for variadic args, for
|
|
callee saved regs and for local vars) and assuming that those SUB use
|
|
long-immediate (hence double length).
|
|
5) Stores of arguments registers are considered part of prologue too
|
|
(R7 - R1 + 1).
|
|
This is quite an extreme case, because even with -O0 GCC will collapse first
|
|
two SUBs into one and long immediate values are quite unlikely to appear in
|
|
this case, but still better to overshoot a bit - prologue analysis will
|
|
anyway stop at the first instruction that doesn't fit prologue, so this
|
|
limit will be rarely reached. */
|
|
|
|
const static int MAX_PROLOGUE_LENGTH
|
|
= 4 * (ARC_R25_REGNUM - ARC_R13_REGNUM + 1 + 2 + 1 + 6
|
|
+ ARC_LAST_ARG_REGNUM - ARC_FIRST_ARG_REGNUM + 1);
|
|
|
|
/* Implement the "skip_prologue" gdbarch method.
|
|
|
|
Skip the prologue for the function at PC. This is done by checking from
|
|
the line information read from the DWARF, if possible; otherwise, we scan
|
|
the function prologue to find its end. */
|
|
|
|
static CORE_ADDR
|
|
arc_skip_prologue (struct gdbarch *gdbarch, CORE_ADDR pc)
|
|
{
|
|
if (arc_debug)
|
|
debug_printf ("arc: skip_prologue\n");
|
|
|
|
CORE_ADDR func_addr;
|
|
const char *func_name;
|
|
|
|
/* See what the symbol table says. */
|
|
if (find_pc_partial_function (pc, &func_name, &func_addr, NULL))
|
|
{
|
|
/* Found a function. */
|
|
CORE_ADDR postprologue_pc
|
|
= skip_prologue_using_sal (gdbarch, func_addr);
|
|
|
|
if (postprologue_pc != 0)
|
|
return std::max (pc, postprologue_pc);
|
|
}
|
|
|
|
/* No prologue info in symbol table, have to analyze prologue. */
|
|
|
|
/* Find an upper limit on the function prologue using the debug
|
|
information. If there is no debug information about prologue end, then
|
|
skip_prologue_using_sal will return 0. */
|
|
CORE_ADDR limit_pc = skip_prologue_using_sal (gdbarch, pc);
|
|
|
|
/* If there is no debug information at all, it is required to give some
|
|
semi-arbitrary hard limit on amount of bytes to scan during prologue
|
|
analysis. */
|
|
if (limit_pc == 0)
|
|
limit_pc = pc + MAX_PROLOGUE_LENGTH;
|
|
|
|
/* Find the address of the first instruction after the prologue by scanning
|
|
through it - no other information is needed, so pass NULL as a cache. */
|
|
return arc_analyze_prologue (gdbarch, pc, limit_pc, NULL);
|
|
}
|
|
|
|
/* Implement the "print_insn" gdbarch method.
|
|
|
|
arc_get_disassembler () may return different functions depending on bfd
|
|
type, so it is not possible to pass print_insn directly to
|
|
set_gdbarch_print_insn (). Instead this wrapper function is used. It also
|
|
may be used by other functions to get disassemble_info for address. It is
|
|
important to note, that those print_insn from opcodes always print
|
|
instruction to the stream specified in the INFO. If this is not desired,
|
|
then either `print_insn` function in INFO should be set to some function
|
|
that will not print, or `stream` should be different from standard
|
|
gdb_stdlog. */
|
|
|
|
int
|
|
arc_delayed_print_insn (bfd_vma addr, struct disassemble_info *info)
|
|
{
|
|
/* Standard BFD "machine number" field allows libopcodes disassembler to
|
|
distinguish ARC 600, 700 and v2 cores, however v2 encompasses both ARC EM
|
|
and HS, which have some difference between. There are two ways to specify
|
|
what is the target core:
|
|
1) via the disassemble_info->disassembler_options;
|
|
2) otherwise libopcodes will use private (architecture-specific) ELF
|
|
header.
|
|
|
|
Using disassembler_options is preferable, because it comes directly from
|
|
GDBserver which scanned an actual ARC core identification info. However,
|
|
not all GDBservers report core architecture, so as a fallback GDB still
|
|
should support analysis of ELF header. The libopcodes disassembly code
|
|
uses the section to find the BFD and the BFD to find the ELF header,
|
|
therefore this function should set disassemble_info->section properly.
|
|
|
|
disassembler_options was already set by non-target specific code with
|
|
proper options obtained via gdbarch_disassembler_options ().
|
|
|
|
This function might be called multiple times in a sequence, reusing same
|
|
disassemble_info. */
|
|
if ((info->disassembler_options == NULL) && (info->section == NULL))
|
|
{
|
|
struct obj_section *s = find_pc_section (addr);
|
|
if (s != NULL)
|
|
info->section = s->the_bfd_section;
|
|
}
|
|
|
|
return default_print_insn (addr, info);
|
|
}
|
|
|
|
/* Baremetal breakpoint instructions.
|
|
|
|
ARC supports both big- and little-endian. However, instructions for
|
|
little-endian processors are encoded in the middle-endian: half-words are
|
|
in big-endian, while bytes inside the half-words are in little-endian; data
|
|
is represented in the "normal" little-endian. Big-endian processors treat
|
|
data and code identically.
|
|
|
|
Assuming the number 0x01020304, it will be presented this way:
|
|
|
|
Address : N N+1 N+2 N+3
|
|
little-endian : 0x04 0x03 0x02 0x01
|
|
big-endian : 0x01 0x02 0x03 0x04
|
|
ARC middle-endian : 0x02 0x01 0x04 0x03
|
|
*/
|
|
|
|
static const gdb_byte arc_brk_s_be[] = { 0x7f, 0xff };
|
|
static const gdb_byte arc_brk_s_le[] = { 0xff, 0x7f };
|
|
static const gdb_byte arc_brk_be[] = { 0x25, 0x6f, 0x00, 0x3f };
|
|
static const gdb_byte arc_brk_le[] = { 0x6f, 0x25, 0x3f, 0x00 };
|
|
|
|
/* For ARC ELF, breakpoint uses the 16-bit BRK_S instruction, which is 0x7fff
|
|
(little endian) or 0xff7f (big endian). We used to insert BRK_S even
|
|
instead of 32-bit instructions, which works mostly ok, unless breakpoint is
|
|
inserted into delay slot instruction. In this case if branch is taken
|
|
BLINK value will be set to address of instruction after delay slot, however
|
|
if we replaced 32-bit instruction in delay slot with 16-bit long BRK_S,
|
|
then BLINK value will have an invalid value - it will point to the address
|
|
after the BRK_S (which was there at the moment of branch execution) while
|
|
it should point to the address after the 32-bit long instruction. To avoid
|
|
such issues this function disassembles instruction at target location and
|
|
evaluates it value.
|
|
|
|
ARC 600 supports only 16-bit BRK_S.
|
|
|
|
NB: Baremetal GDB uses BRK[_S], while user-space GDB uses TRAP_S. BRK[_S]
|
|
is much better because it doesn't commit unlike TRAP_S, so it can be set in
|
|
delay slots; however it cannot be used in user-mode, hence usage of TRAP_S
|
|
in GDB for user-space. */
|
|
|
|
/* Implement the "breakpoint_kind_from_pc" gdbarch method. */
|
|
|
|
static int
|
|
arc_breakpoint_kind_from_pc (struct gdbarch *gdbarch, CORE_ADDR *pcptr)
|
|
{
|
|
size_t length_with_limm = gdb_insn_length (gdbarch, *pcptr);
|
|
|
|
/* Replace 16-bit instruction with BRK_S, replace 32-bit instructions with
|
|
BRK. LIMM is part of instruction length, so it can be either 4 or 8
|
|
bytes for 32-bit instructions. */
|
|
if ((length_with_limm == 4 || length_with_limm == 8)
|
|
&& !arc_mach_is_arc600 (gdbarch))
|
|
return sizeof (arc_brk_le);
|
|
else
|
|
return sizeof (arc_brk_s_le);
|
|
}
|
|
|
|
/* Implement the "sw_breakpoint_from_kind" gdbarch method. */
|
|
|
|
static const gdb_byte *
|
|
arc_sw_breakpoint_from_kind (struct gdbarch *gdbarch, int kind, int *size)
|
|
{
|
|
*size = kind;
|
|
|
|
if (kind == sizeof (arc_brk_le))
|
|
{
|
|
return ((gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
|
|
? arc_brk_be
|
|
: arc_brk_le);
|
|
}
|
|
else
|
|
{
|
|
return ((gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG)
|
|
? arc_brk_s_be
|
|
: arc_brk_s_le);
|
|
}
|
|
}
|
|
|
|
/* Implement the "frame_align" gdbarch method. */
|
|
|
|
static CORE_ADDR
|
|
arc_frame_align (struct gdbarch *gdbarch, CORE_ADDR sp)
|
|
{
|
|
return align_down (sp, 4);
|
|
}
|
|
|
|
/* Dump the frame info. Used for internal debugging only. */
|
|
|
|
static void
|
|
arc_print_frame_cache (struct gdbarch *gdbarch, const char *message,
|
|
struct arc_frame_cache *cache, int addresses_known)
|
|
{
|
|
debug_printf ("arc: frame_info %s\n", message);
|
|
debug_printf ("arc: prev_sp = %s\n", paddress (gdbarch, cache->prev_sp));
|
|
debug_printf ("arc: frame_base_reg = %i\n", cache->frame_base_reg);
|
|
debug_printf ("arc: frame_base_offset = %s\n",
|
|
plongest (cache->frame_base_offset));
|
|
|
|
for (int i = 0; i <= ARC_BLINK_REGNUM; i++)
|
|
{
|
|
if (trad_frame_addr_p (cache->saved_regs, i))
|
|
debug_printf ("arc: saved register %s at %s %s\n",
|
|
gdbarch_register_name (gdbarch, i),
|
|
(addresses_known) ? "address" : "offset",
|
|
paddress (gdbarch, cache->saved_regs[i].addr));
|
|
}
|
|
}
|
|
|
|
/* Frame unwinder for normal frames. */
|
|
|
|
static struct arc_frame_cache *
|
|
arc_make_frame_cache (struct frame_info *this_frame)
|
|
{
|
|
if (arc_debug)
|
|
debug_printf ("arc: frame_cache\n");
|
|
|
|
struct gdbarch *gdbarch = get_frame_arch (this_frame);
|
|
|
|
CORE_ADDR block_addr = get_frame_address_in_block (this_frame);
|
|
CORE_ADDR entrypoint, prologue_end;
|
|
if (find_pc_partial_function (block_addr, NULL, &entrypoint, &prologue_end))
|
|
{
|
|
struct symtab_and_line sal = find_pc_line (entrypoint, 0);
|
|
CORE_ADDR prev_pc = get_frame_pc (this_frame);
|
|
if (sal.line == 0)
|
|
/* No line info so use current PC. */
|
|
prologue_end = prev_pc;
|
|
else if (sal.end < prologue_end)
|
|
/* The next line begins after the function end. */
|
|
prologue_end = sal.end;
|
|
|
|
prologue_end = std::min (prologue_end, prev_pc);
|
|
}
|
|
else
|
|
{
|
|
/* If find_pc_partial_function returned nothing then there is no symbol
|
|
information at all for this PC. Currently it is assumed in this case
|
|
that current PC is entrypoint to function and try to construct the
|
|
frame from that. This is, probably, suboptimal, for example ARM
|
|
assumes in this case that program is inside the normal frame (with
|
|
frame pointer). ARC, perhaps, should try to do the same. */
|
|
entrypoint = get_frame_register_unsigned (this_frame,
|
|
gdbarch_pc_regnum (gdbarch));
|
|
prologue_end = entrypoint + MAX_PROLOGUE_LENGTH;
|
|
}
|
|
|
|
/* Allocate new frame cache instance and space for saved register info.
|
|
FRAME_OBSTACK_ZALLOC will initialize fields to zeroes. */
|
|
struct arc_frame_cache *cache
|
|
= FRAME_OBSTACK_ZALLOC (struct arc_frame_cache);
|
|
cache->saved_regs = trad_frame_alloc_saved_regs (this_frame);
|
|
|
|
arc_analyze_prologue (gdbarch, entrypoint, prologue_end, cache);
|
|
|
|
if (arc_debug)
|
|
arc_print_frame_cache (gdbarch, "after prologue", cache, false);
|
|
|
|
CORE_ADDR unwound_fb = get_frame_register_unsigned (this_frame,
|
|
cache->frame_base_reg);
|
|
if (unwound_fb == 0)
|
|
return cache;
|
|
cache->prev_sp = unwound_fb + cache->frame_base_offset;
|
|
|
|
for (int i = 0; i <= ARC_LAST_CORE_REGNUM; i++)
|
|
{
|
|
if (trad_frame_addr_p (cache->saved_regs, i))
|
|
cache->saved_regs[i].addr += cache->prev_sp;
|
|
}
|
|
|
|
if (arc_debug)
|
|
arc_print_frame_cache (gdbarch, "after previous SP found", cache, true);
|
|
|
|
return cache;
|
|
}
|
|
|
|
/* Implement the "this_id" frame_unwind method. */
|
|
|
|
static void
|
|
arc_frame_this_id (struct frame_info *this_frame, void **this_cache,
|
|
struct frame_id *this_id)
|
|
{
|
|
if (arc_debug)
|
|
debug_printf ("arc: frame_this_id\n");
|
|
|
|
struct gdbarch *gdbarch = get_frame_arch (this_frame);
|
|
|
|
if (*this_cache == NULL)
|
|
*this_cache = arc_make_frame_cache (this_frame);
|
|
struct arc_frame_cache *cache = (struct arc_frame_cache *) (*this_cache);
|
|
|
|
CORE_ADDR stack_addr = cache->prev_sp;
|
|
|
|
/* There are 4 possible situation which decide how frame_id->code_addr is
|
|
evaluated:
|
|
|
|
1) Function is compiled with option -g. Then frame_id will be created
|
|
in dwarf_* function and not in this function. NB: even if target
|
|
binary is compiled with -g, some std functions like __start and _init
|
|
are not, so they still will follow one of the following choices.
|
|
|
|
2) Function is compiled without -g and binary hasn't been stripped in
|
|
any way. In this case GDB still has enough information to evaluate
|
|
frame code_addr properly. This case is covered by call to
|
|
get_frame_func ().
|
|
|
|
3) Binary has been striped with option -g (strip debug symbols). In
|
|
this case there is still enough symbols for get_frame_func () to work
|
|
properly, so this case is also covered by it.
|
|
|
|
4) Binary has been striped with option -s (strip all symbols). In this
|
|
case GDB cannot get function start address properly, so we return current
|
|
PC value instead.
|
|
*/
|
|
CORE_ADDR code_addr = get_frame_func (this_frame);
|
|
if (code_addr == 0)
|
|
code_addr = get_frame_register_unsigned (this_frame,
|
|
gdbarch_pc_regnum (gdbarch));
|
|
|
|
*this_id = frame_id_build (stack_addr, code_addr);
|
|
}
|
|
|
|
/* Implement the "prev_register" frame_unwind method. */
|
|
|
|
static struct value *
|
|
arc_frame_prev_register (struct frame_info *this_frame,
|
|
void **this_cache, int regnum)
|
|
{
|
|
if (*this_cache == NULL)
|
|
*this_cache = arc_make_frame_cache (this_frame);
|
|
struct arc_frame_cache *cache = (struct arc_frame_cache *) (*this_cache);
|
|
|
|
struct gdbarch *gdbarch = get_frame_arch (this_frame);
|
|
|
|
/* If we are asked to unwind the PC, then we need to return BLINK instead:
|
|
the saved value of PC points into this frame's function's prologue, not
|
|
the next frame's function's resume location. */
|
|
if (regnum == gdbarch_pc_regnum (gdbarch))
|
|
regnum = ARC_BLINK_REGNUM;
|
|
|
|
/* SP is a special case - we should return prev_sp, because
|
|
trad_frame_get_prev_register will return _current_ SP value.
|
|
Alternatively we could have stored cache->prev_sp in the cache->saved
|
|
regs, but here we follow the lead of AArch64, ARM and Xtensa and will
|
|
leave that logic in this function, instead of prologue analyzers. That I
|
|
think is a bit more clear as `saved_regs` should contain saved regs, not
|
|
computable.
|
|
|
|
Because value has been computed, "got_constant" should be used, so that
|
|
returned value will be a "not_lval" - immutable. */
|
|
|
|
if (regnum == gdbarch_sp_regnum (gdbarch))
|
|
return frame_unwind_got_constant (this_frame, regnum, cache->prev_sp);
|
|
|
|
return trad_frame_get_prev_register (this_frame, cache->saved_regs, regnum);
|
|
}
|
|
|
|
/* Implement the "init_reg" dwarf2_frame method. */
|
|
|
|
static void
|
|
arc_dwarf2_frame_init_reg (struct gdbarch *gdbarch, int regnum,
|
|
struct dwarf2_frame_state_reg *reg,
|
|
struct frame_info *info)
|
|
{
|
|
if (regnum == gdbarch_pc_regnum (gdbarch))
|
|
/* The return address column. */
|
|
reg->how = DWARF2_FRAME_REG_RA;
|
|
else if (regnum == gdbarch_sp_regnum (gdbarch))
|
|
/* The call frame address. */
|
|
reg->how = DWARF2_FRAME_REG_CFA;
|
|
}
|
|
|
|
/* Structure defining the ARC ordinary frame unwind functions. Since we are
|
|
the fallback unwinder, we use the default frame sniffer, which always
|
|
accepts the frame. */
|
|
|
|
static const struct frame_unwind arc_frame_unwind = {
|
|
NORMAL_FRAME,
|
|
default_frame_unwind_stop_reason,
|
|
arc_frame_this_id,
|
|
arc_frame_prev_register,
|
|
NULL,
|
|
default_frame_sniffer,
|
|
NULL,
|
|
NULL
|
|
};
|
|
|
|
|
|
static const struct frame_base arc_normal_base = {
|
|
&arc_frame_unwind,
|
|
arc_frame_base_address,
|
|
arc_frame_base_address,
|
|
arc_frame_base_address
|
|
};
|
|
|
|
/* Initialize target description for the ARC.
|
|
|
|
Returns TRUE if input tdesc was valid and in this case it will assign TDESC
|
|
and TDESC_DATA output parameters. */
|
|
|
|
static bool
|
|
arc_tdesc_init (struct gdbarch_info info, const struct target_desc **tdesc,
|
|
struct tdesc_arch_data **tdesc_data)
|
|
{
|
|
if (arc_debug)
|
|
debug_printf ("arc: Target description initialization.\n");
|
|
|
|
const struct target_desc *tdesc_loc = info.target_desc;
|
|
|
|
/* Depending on whether this is ARCompact or ARCv2 we will assign
|
|
different default registers sets (which will differ in exactly two core
|
|
registers). GDB will also refuse to accept register feature from invalid
|
|
ISA - v2 features can be used only with v2 ARChitecture. We read
|
|
bfd_arch_info, which looks like to be a safe bet here, as it looks like it
|
|
is always initialized even when we don't pass any elf file to GDB at all
|
|
(it uses default arch in this case). Also GDB will call this function
|
|
multiple times, and if XML target description file contains architecture
|
|
specifications, then GDB will set this architecture to info.bfd_arch_info,
|
|
overriding value from ELF file if they are different. That means that,
|
|
where matters, this value is always our best guess on what CPU we are
|
|
debugging. It has been noted that architecture specified in tdesc file
|
|
has higher precedence over ELF and even "set architecture" - that is,
|
|
using "set architecture" command will have no effect when tdesc has "arch"
|
|
tag. */
|
|
/* Cannot use arc_mach_is_arcv2 (), because gdbarch is not created yet. */
|
|
const int is_arcv2 = (info.bfd_arch_info->mach == bfd_mach_arc_arcv2);
|
|
bool is_reduced_rf;
|
|
const char *const *core_regs;
|
|
const char *core_feature_name;
|
|
|
|
/* If target doesn't provide a description - use default one. */
|
|
if (!tdesc_has_registers (tdesc_loc))
|
|
{
|
|
if (is_arcv2)
|
|
{
|
|
tdesc_loc = tdesc_arc_v2;
|
|
if (arc_debug)
|
|
debug_printf ("arc: Using default register set for ARC v2.\n");
|
|
}
|
|
else
|
|
{
|
|
tdesc_loc = tdesc_arc_arcompact;
|
|
if (arc_debug)
|
|
debug_printf ("arc: Using default register set for ARCompact.\n");
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if (arc_debug)
|
|
debug_printf ("arc: Using provided register set.\n");
|
|
}
|
|
gdb_assert (tdesc_loc != NULL);
|
|
|
|
/* Now we can search for base registers. Core registers can be either full
|
|
or reduced. Summary:
|
|
|
|
- core.v2 + aux-minimal
|
|
- core-reduced.v2 + aux-minimal
|
|
- core.arcompact + aux-minimal
|
|
|
|
NB: It is entirely feasible to have ARCompact with reduced core regs, but
|
|
we ignore that because GCC doesn't support that and at the same time
|
|
ARCompact is considered obsolete, so there is not much reason to support
|
|
that. */
|
|
const struct tdesc_feature *feature
|
|
= tdesc_find_feature (tdesc_loc, core_v2_feature_name);
|
|
if (feature != NULL)
|
|
{
|
|
/* Confirm that register and architecture match, to prevent accidents in
|
|
some situations. This code will trigger an error if:
|
|
|
|
1. XML tdesc doesn't specify arch explicitly, registers are for arch
|
|
X, but ELF specifies arch Y.
|
|
|
|
2. XML tdesc specifies arch X, but contains registers for arch Y.
|
|
|
|
It will not protect from case where XML or ELF specify arch X,
|
|
registers are for the same arch X, but the real target is arch Y. To
|
|
detect this case we need to check IDENTITY register. */
|
|
if (!is_arcv2)
|
|
{
|
|
arc_print (_("Error: ARC v2 target description supplied for "
|
|
"non-ARCv2 target.\n"));
|
|
return false;
|
|
}
|
|
|
|
is_reduced_rf = false;
|
|
core_feature_name = core_v2_feature_name;
|
|
core_regs = core_v2_register_names;
|
|
}
|
|
else
|
|
{
|
|
feature = tdesc_find_feature (tdesc_loc, core_reduced_v2_feature_name);
|
|
if (feature != NULL)
|
|
{
|
|
if (!is_arcv2)
|
|
{
|
|
arc_print (_("Error: ARC v2 target description supplied for "
|
|
"non-ARCv2 target.\n"));
|
|
return false;
|
|
}
|
|
|
|
is_reduced_rf = true;
|
|
core_feature_name = core_reduced_v2_feature_name;
|
|
core_regs = core_v2_register_names;
|
|
}
|
|
else
|
|
{
|
|
feature = tdesc_find_feature (tdesc_loc,
|
|
core_arcompact_feature_name);
|
|
if (feature != NULL)
|
|
{
|
|
if (is_arcv2)
|
|
{
|
|
arc_print (_("Error: ARCompact target description supplied "
|
|
"for non-ARCompact target.\n"));
|
|
return false;
|
|
}
|
|
|
|
is_reduced_rf = false;
|
|
core_feature_name = core_arcompact_feature_name;
|
|
core_regs = core_arcompact_register_names;
|
|
}
|
|
else
|
|
{
|
|
arc_print (_("Error: Couldn't find core register feature in "
|
|
"supplied target description."));
|
|
return false;
|
|
}
|
|
}
|
|
}
|
|
|
|
struct tdesc_arch_data *tdesc_data_loc = tdesc_data_alloc ();
|
|
|
|
gdb_assert (feature != NULL);
|
|
int valid_p = 1;
|
|
|
|
for (int i = 0; i <= ARC_LAST_CORE_REGNUM; i++)
|
|
{
|
|
/* If rf16, then skip extra registers. */
|
|
if (is_reduced_rf && ((i >= ARC_R4_REGNUM && i <= ARC_R9_REGNUM)
|
|
|| (i >= ARC_R16_REGNUM && i <= ARC_R25_REGNUM)))
|
|
continue;
|
|
|
|
valid_p = tdesc_numbered_register (feature, tdesc_data_loc, i,
|
|
core_regs[i]);
|
|
|
|
/* - Ignore errors in extension registers - they are optional.
|
|
- Ignore missing ILINK because it doesn't make sense for Linux.
|
|
- Ignore missing ILINK2 when architecture is ARCompact, because it
|
|
doesn't make sense for Linux targets.
|
|
|
|
In theory those optional registers should be in separate features, but
|
|
that would create numerous but tiny features, which looks like an
|
|
overengineering of a rather simple task. */
|
|
if (!valid_p && (i <= ARC_SP_REGNUM || i == ARC_BLINK_REGNUM
|
|
|| i == ARC_LP_COUNT_REGNUM || i == ARC_PCL_REGNUM
|
|
|| (i == ARC_R30_REGNUM && is_arcv2)))
|
|
{
|
|
arc_print (_("Error: Cannot find required register `%s' in "
|
|
"feature `%s'.\n"), core_regs[i], core_feature_name);
|
|
tdesc_data_cleanup (tdesc_data_loc);
|
|
return false;
|
|
}
|
|
}
|
|
|
|
/* Mandatory AUX registeres are intentionally few and are common between
|
|
ARCompact and ARC v2, so same code can be used for both. */
|
|
feature = tdesc_find_feature (tdesc_loc, aux_minimal_feature_name);
|
|
if (feature == NULL)
|
|
{
|
|
arc_print (_("Error: Cannot find required feature `%s' in supplied "
|
|
"target description.\n"), aux_minimal_feature_name);
|
|
tdesc_data_cleanup (tdesc_data_loc);
|
|
return false;
|
|
}
|
|
|
|
for (int i = ARC_FIRST_AUX_REGNUM; i <= ARC_LAST_AUX_REGNUM; i++)
|
|
{
|
|
const char *name = aux_minimal_register_names[i - ARC_FIRST_AUX_REGNUM];
|
|
valid_p = tdesc_numbered_register (feature, tdesc_data_loc, i, name);
|
|
if (!valid_p)
|
|
{
|
|
arc_print (_("Error: Cannot find required register `%s' "
|
|
"in feature `%s'.\n"),
|
|
name, tdesc_feature_name (feature));
|
|
tdesc_data_cleanup (tdesc_data_loc);
|
|
return false;
|
|
}
|
|
}
|
|
|
|
*tdesc = tdesc_loc;
|
|
*tdesc_data = tdesc_data_loc;
|
|
|
|
return true;
|
|
}
|
|
|
|
/* Implement the type_align gdbarch function. */
|
|
|
|
static ULONGEST
|
|
arc_type_align (struct gdbarch *gdbarch, struct type *type)
|
|
{
|
|
switch (TYPE_CODE (type))
|
|
{
|
|
case TYPE_CODE_PTR:
|
|
case TYPE_CODE_FUNC:
|
|
case TYPE_CODE_FLAGS:
|
|
case TYPE_CODE_INT:
|
|
case TYPE_CODE_RANGE:
|
|
case TYPE_CODE_FLT:
|
|
case TYPE_CODE_ENUM:
|
|
case TYPE_CODE_REF:
|
|
case TYPE_CODE_RVALUE_REF:
|
|
case TYPE_CODE_CHAR:
|
|
case TYPE_CODE_BOOL:
|
|
case TYPE_CODE_DECFLOAT:
|
|
case TYPE_CODE_METHODPTR:
|
|
case TYPE_CODE_MEMBERPTR:
|
|
type = check_typedef (type);
|
|
return std::min<ULONGEST> (4, TYPE_LENGTH (type));
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/* Implement the "init" gdbarch method. */
|
|
|
|
static struct gdbarch *
|
|
arc_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches)
|
|
{
|
|
const struct target_desc *tdesc;
|
|
struct tdesc_arch_data *tdesc_data;
|
|
|
|
if (arc_debug)
|
|
debug_printf ("arc: Architecture initialization.\n");
|
|
|
|
if (!arc_tdesc_init (info, &tdesc, &tdesc_data))
|
|
return NULL;
|
|
|
|
/* Allocate the ARC-private target-dependent information structure, and the
|
|
GDB target-independent information structure. */
|
|
struct gdbarch_tdep *tdep = XCNEW (struct gdbarch_tdep);
|
|
tdep->jb_pc = -1; /* No longjmp support by default. */
|
|
struct gdbarch *gdbarch = gdbarch_alloc (&info, tdep);
|
|
|
|
/* Data types. */
|
|
set_gdbarch_short_bit (gdbarch, 16);
|
|
set_gdbarch_int_bit (gdbarch, 32);
|
|
set_gdbarch_long_bit (gdbarch, 32);
|
|
set_gdbarch_long_long_bit (gdbarch, 64);
|
|
set_gdbarch_type_align (gdbarch, arc_type_align);
|
|
set_gdbarch_float_bit (gdbarch, 32);
|
|
set_gdbarch_float_format (gdbarch, floatformats_ieee_single);
|
|
set_gdbarch_double_bit (gdbarch, 64);
|
|
set_gdbarch_double_format (gdbarch, floatformats_ieee_double);
|
|
set_gdbarch_ptr_bit (gdbarch, 32);
|
|
set_gdbarch_addr_bit (gdbarch, 32);
|
|
set_gdbarch_char_signed (gdbarch, 0);
|
|
|
|
set_gdbarch_write_pc (gdbarch, arc_write_pc);
|
|
|
|
set_gdbarch_virtual_frame_pointer (gdbarch, arc_virtual_frame_pointer);
|
|
|
|
/* tdesc_use_registers expects gdbarch_num_regs to return number of registers
|
|
parsed by gdbarch_init, and then it will add all of the remaining
|
|
registers and will increase number of registers. */
|
|
set_gdbarch_num_regs (gdbarch, ARC_LAST_REGNUM + 1);
|
|
set_gdbarch_num_pseudo_regs (gdbarch, 0);
|
|
set_gdbarch_sp_regnum (gdbarch, ARC_SP_REGNUM);
|
|
set_gdbarch_pc_regnum (gdbarch, ARC_PC_REGNUM);
|
|
set_gdbarch_ps_regnum (gdbarch, ARC_STATUS32_REGNUM);
|
|
set_gdbarch_fp0_regnum (gdbarch, -1); /* No FPU registers. */
|
|
|
|
set_gdbarch_push_dummy_call (gdbarch, arc_push_dummy_call);
|
|
set_gdbarch_push_dummy_code (gdbarch, arc_push_dummy_code);
|
|
|
|
set_gdbarch_cannot_fetch_register (gdbarch, arc_cannot_fetch_register);
|
|
set_gdbarch_cannot_store_register (gdbarch, arc_cannot_store_register);
|
|
|
|
set_gdbarch_believe_pcc_promotion (gdbarch, 1);
|
|
|
|
set_gdbarch_return_value (gdbarch, arc_return_value);
|
|
|
|
set_gdbarch_skip_prologue (gdbarch, arc_skip_prologue);
|
|
set_gdbarch_inner_than (gdbarch, core_addr_lessthan);
|
|
|
|
set_gdbarch_breakpoint_kind_from_pc (gdbarch, arc_breakpoint_kind_from_pc);
|
|
set_gdbarch_sw_breakpoint_from_kind (gdbarch, arc_sw_breakpoint_from_kind);
|
|
|
|
/* On ARC 600 BRK_S instruction advances PC, unlike other ARC cores. */
|
|
if (!arc_mach_is_arc600 (gdbarch))
|
|
set_gdbarch_decr_pc_after_break (gdbarch, 0);
|
|
else
|
|
set_gdbarch_decr_pc_after_break (gdbarch, 2);
|
|
|
|
set_gdbarch_frame_align (gdbarch, arc_frame_align);
|
|
|
|
set_gdbarch_print_insn (gdbarch, arc_delayed_print_insn);
|
|
|
|
set_gdbarch_cannot_step_breakpoint (gdbarch, 1);
|
|
|
|
/* "nonsteppable" watchpoint means that watchpoint triggers before
|
|
instruction is committed, therefore it is required to remove watchpoint
|
|
to step though instruction that triggers it. ARC watchpoints trigger
|
|
only after instruction is committed, thus there is no need to remove
|
|
them. In fact on ARC watchpoint for memory writes may trigger with more
|
|
significant delay, like one or two instructions, depending on type of
|
|
memory where write is performed (CCM or external) and next instruction
|
|
after the memory write. */
|
|
set_gdbarch_have_nonsteppable_watchpoint (gdbarch, 0);
|
|
|
|
/* This doesn't include possible long-immediate value. */
|
|
set_gdbarch_max_insn_length (gdbarch, 4);
|
|
|
|
/* Frame unwinders and sniffers. */
|
|
dwarf2_frame_set_init_reg (gdbarch, arc_dwarf2_frame_init_reg);
|
|
dwarf2_append_unwinders (gdbarch);
|
|
frame_unwind_append_unwinder (gdbarch, &arc_frame_unwind);
|
|
frame_base_set_default (gdbarch, &arc_normal_base);
|
|
|
|
/* Setup stuff specific to a particular environment (baremetal or Linux).
|
|
It can override functions set earlier. */
|
|
gdbarch_init_osabi (info, gdbarch);
|
|
|
|
if (tdep->jb_pc >= 0)
|
|
set_gdbarch_get_longjmp_target (gdbarch, arc_get_longjmp_target);
|
|
|
|
/* Disassembler options. Enforce CPU if it was specified in XML target
|
|
description, otherwise use default method of determining CPU (ELF private
|
|
header). */
|
|
if (info.target_desc != NULL)
|
|
{
|
|
const struct bfd_arch_info *tdesc_arch
|
|
= tdesc_architecture (info.target_desc);
|
|
if (tdesc_arch != NULL)
|
|
{
|
|
xfree (arc_disassembler_options);
|
|
/* FIXME: It is not really good to change disassembler options
|
|
behind the scene, because that might override options
|
|
specified by the user. However as of now ARC doesn't support
|
|
`set disassembler-options' hence this code is the only place
|
|
where options are changed. It also changes options for all
|
|
existing gdbarches, which also can be problematic, if
|
|
arc_gdbarch_init will start reusing existing gdbarch
|
|
instances. */
|
|
/* Target description specifies a BFD architecture, which is
|
|
different from ARC cpu, as accepted by disassembler (and most
|
|
other ARC tools), because cpu values are much more fine grained -
|
|
there can be multiple cpu values per single BFD architecture. As
|
|
a result this code should translate architecture to some cpu
|
|
value. Since there is no info on exact cpu configuration, it is
|
|
best to use the most feature-rich CPU, so that disassembler will
|
|
recognize all instructions available to the specified
|
|
architecture. */
|
|
switch (tdesc_arch->mach)
|
|
{
|
|
case bfd_mach_arc_arc601:
|
|
arc_disassembler_options = xstrdup ("cpu=arc601");
|
|
break;
|
|
case bfd_mach_arc_arc600:
|
|
arc_disassembler_options = xstrdup ("cpu=arc600");
|
|
break;
|
|
case bfd_mach_arc_arc700:
|
|
arc_disassembler_options = xstrdup ("cpu=arc700");
|
|
break;
|
|
case bfd_mach_arc_arcv2:
|
|
/* Machine arcv2 has three arches: ARCv2, EM and HS; where ARCv2
|
|
is treated as EM. */
|
|
if (arc_arch_is_hs (tdesc_arch))
|
|
arc_disassembler_options = xstrdup ("cpu=hs38_linux");
|
|
else
|
|
arc_disassembler_options = xstrdup ("cpu=em4_fpuda");
|
|
break;
|
|
default:
|
|
arc_disassembler_options = NULL;
|
|
break;
|
|
}
|
|
set_gdbarch_disassembler_options (gdbarch,
|
|
&arc_disassembler_options);
|
|
}
|
|
}
|
|
|
|
tdesc_use_registers (gdbarch, tdesc, tdesc_data);
|
|
|
|
return gdbarch;
|
|
}
|
|
|
|
/* Implement the "dump_tdep" gdbarch method. */
|
|
|
|
static void
|
|
arc_dump_tdep (struct gdbarch *gdbarch, struct ui_file *file)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
|
|
fprintf_unfiltered (file, "arc_dump_tdep: jb_pc = %i\n", tdep->jb_pc);
|
|
}
|
|
|
|
/* Wrapper for "maintenance print arc" list of commands. */
|
|
|
|
static void
|
|
maintenance_print_arc_command (const char *args, int from_tty)
|
|
{
|
|
cmd_show_list (maintenance_print_arc_list, from_tty, "");
|
|
}
|
|
|
|
/* This command accepts single argument - address of instruction to
|
|
disassemble. */
|
|
|
|
static void
|
|
dump_arc_instruction_command (const char *args, int from_tty)
|
|
{
|
|
struct value *val;
|
|
if (args != NULL && strlen (args) > 0)
|
|
val = evaluate_expression (parse_expression (args).get ());
|
|
else
|
|
val = access_value_history (0);
|
|
record_latest_value (val);
|
|
|
|
CORE_ADDR address = value_as_address (val);
|
|
struct arc_instruction insn;
|
|
struct disassemble_info di = arc_disassemble_info (target_gdbarch ());
|
|
arc_insn_decode (address, &di, arc_delayed_print_insn, &insn);
|
|
arc_insn_dump (insn);
|
|
}
|
|
|
|
void
|
|
_initialize_arc_tdep (void)
|
|
{
|
|
gdbarch_register (bfd_arch_arc, arc_gdbarch_init, arc_dump_tdep);
|
|
|
|
initialize_tdesc_arc_v2 ();
|
|
initialize_tdesc_arc_arcompact ();
|
|
|
|
/* Register ARC-specific commands with gdb. */
|
|
|
|
/* Add root prefix command for "maintenance print arc" commands. */
|
|
add_prefix_cmd ("arc", class_maintenance, maintenance_print_arc_command,
|
|
_("ARC-specific maintenance commands for printing GDB "
|
|
"internal state."),
|
|
&maintenance_print_arc_list, "maintenance print arc ", 0,
|
|
&maintenanceprintlist);
|
|
|
|
add_cmd ("arc-instruction", class_maintenance,
|
|
dump_arc_instruction_command,
|
|
_("Dump arc_instruction structure for specified address."),
|
|
&maintenance_print_arc_list);
|
|
|
|
/* Debug internals for ARC GDB. */
|
|
add_setshow_zinteger_cmd ("arc", class_maintenance,
|
|
&arc_debug,
|
|
_("Set ARC specific debugging."),
|
|
_("Show ARC specific debugging."),
|
|
_("Non-zero enables ARC specific debugging."),
|
|
NULL, NULL, &setdebuglist, &showdebuglist);
|
|
}
|