mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-15 04:31:49 +08:00
6884417a0f
When the assembler finds an instruction which is part of a higher
opcode architecture it bumps the current opcode architecture. For
example:
$ echo "mwait" | as -bump
{standard input}: Assembler messages:
{standard input}:1: Warning: architecture bumped from "v6" to "v9m" on "mwait"
However, when two instructions pertaining to the same opcode
architecture but associated to different SPARC hardware capabilities
are found in the input stream, and no GAS architecture is specified in
the command line, the assembler bangs:
$ echo "mwait; wr %g0,%g1,%mcdper" | as -bump
{standard input}: Assembler messages:
{standard input}:1: Warning: architecture bumped from "v6" to "v9m" on "mwait"
{standard input}:1: Error: Hardware capability "sparc5" not enabled for "wr".
... and it should'nt, as WRMCDPER pertains to the same architecture
level than MWAIT.
This patch fixes this by extending the definition of sparc opcode
architectures to contain a set of hardware capabilities and making the
assembler to take these capabilities into account when updating the
set of allowed hwcaps when an architecture bump is triggered by some
instruction.
This way, hwcaps associated to architecture levels are maintained in
opcodes, while the assembler keeps the flexibiity of defining GAS
architectures including additional hwcaps (like -Asparcfmaf or the
v8plus* variants).
A test covering this failure case is included.
gas/ChangeLog:
2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c: Move HWS_* and HWS2_* definitions to
opcodes/sparc-opc.c.
(sparc_arch): Clarify the new role of the hwcap_allowed and
hwcap2_allowed fields.
(sparc_arch_table): Remove HWS_* and HWS2_* instances from
hwcap_allowed and hwcap2_allowed respectively.
(md_parse_option): Include the opcode arch hwcaps when processing
-A.
(sparc_ip): Use the current opcode arch hwcaps to update
hwcap_allowed, as well of the hwcaps of the instruction triggering
the bump.
* testsuite/gas/sparc/hwcaps-bump.s: New file.
* testsuite/gas/sparc/hwcaps-bump.l: Likewise.
* testsuite/gas/sparc/sparc.exp (gas_64_check): Run tests in
hwcaps-bump.
include/ChangeLog:
2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com>
* opcode/sparc.h (sparc_opcode_arch): New fields hwcaps and
hwcaps2.
opcodes/ChangeLog:
2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-opc.c (HWS_V8): Definition moved from
gas/config/tc-sparc.c.
(HWS_V9): Likewise.
(HWS_VA): Likewise.
(HWS_VB): Likewise.
(HWS_VC): Likewise.
(HWS_VD): Likewise.
(HWS_VE): Likewise.
(HWS_VV): Likewise.
(HWS_VM): Likewise.
(HWS2_VM): Likewise.
(sparc_opcode_archs): Initialize hwcaps and hwcaps2 fields of
existing entries.
5274 lines
196 KiB
Plaintext
5274 lines
196 KiB
Plaintext
2016-11-22 Jose E. Marchesi <jose.marchesi@oracle.com>
|
||
|
||
* config/tc-sparc.c: Move HWS_* and HWS2_* definitions to
|
||
opcodes/sparc-opc.c.
|
||
(sparc_arch): Clarify the new role of the hwcap_allowed and
|
||
hwcap2_allowed fields.
|
||
(sparc_arch_table): Remove HWS_* and HWS2_* instances from
|
||
hwcap_allowed and hwcap2_allowed respectively.
|
||
(md_parse_option): Include the opcode arch hwcaps when processing
|
||
-A.
|
||
(sparc_ip): Use the current opcode arch hwcaps to update
|
||
hwcap_allowed, as well as the hwcaps of the instruction triggering
|
||
the bump.
|
||
* testsuite/gas/sparc/hwcaps-bump.s: New file.
|
||
* testsuite/gas/sparc/hwcaps-bump.l: Likewise.
|
||
* testsuite/gas/sparc/sparc.exp (gas_64_check): Run tests in
|
||
hwcaps-bump.
|
||
|
||
2016-11-22 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* testsuite/gas/arc/b.d: Update test result.
|
||
|
||
2016-11-22 Alan Modra <amodra@gmail.com>
|
||
|
||
PR 20744
|
||
* config/tc-ppc.c: Delete VLE insn defines.
|
||
(md_assemble): Swap use_a_reloc and use_d_reloc.
|
||
* testsuite/gas/ppc/vle-reloc.d: Update.
|
||
|
||
2016-11-21 Renlin Li <renlin.li@arm.com>
|
||
|
||
PR gas/20827
|
||
* config/tc-arm.c (encode_arm_shift): Don't assert for operands not
|
||
presented.
|
||
* testsuite/gas/arm/add-shift-two.d: New.
|
||
* testsuite/gas/arm/add-shift-two.s: New.
|
||
|
||
2016-11-21 Alan Modra <amodra@gmail.com>
|
||
|
||
* configure.ac: Invoke ACX_PROG_CMP_IGNORE_INITIAL.
|
||
* Makefile.am (comparison): Rewrite using do_compare.
|
||
* configure: Regenerate.
|
||
* Makefile.in: Regenerate.
|
||
* doc/Makefile.in: Regenerate.
|
||
|
||
2016-11-18 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* testsuite/gas/arc/cl-warn.s: New file.
|
||
* testsuite/gas/arc/cpu-pseudop-1.d: Likewise.
|
||
* testsuite/gas/arc/cpu-pseudop-1.s: Likewise.
|
||
* testsuite/gas/arc/cpu-pseudop-2.d: Likewise.
|
||
* testsuite/gas/arc/cpu-pseudop-2.s: Likewise.
|
||
* testsuite/gas/arc/cpu-warn2.s: Likewise.
|
||
* config/tc-arc.c (selected_cpu): Initialize.
|
||
(feature_type): New struct.
|
||
(feature_list): New variable.
|
||
(arc_check_feature): New function.
|
||
(arc_select_cpu): Check for .cpu duplicates. Don't overwrite the
|
||
current cpu features. Check if a feature is available for a given
|
||
cpu.
|
||
(md_parse_option): Test if features are available for a given cpu.
|
||
|
||
2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com>
|
||
|
||
* config/tc-aarch64.c (parse_operands): Handle AARCH64_OPND_IMM_ROT*.
|
||
* testsuite/gas/aarch64/advsimd-armv8_3.d: New.
|
||
* testsuite/gas/aarch64/advsimd-armv8_3.s: New.
|
||
* testsuite/gas/aarch64/illegal-fcmla.s: New.
|
||
* testsuite/gas/aarch64/illegal-fcmla.l: New.
|
||
* testsuite/gas/aarch64/illegal-fcmla.d: New.
|
||
|
||
2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com>
|
||
|
||
* testsuite/gas/aarch64/ldst-exclusive-armv8_3.s: Add ldaprb, ldaprh, ldapr tests.
|
||
* testsuite/gas/aarch64/ldst-exclusive-armv8_3.d: Likewise.
|
||
* testsuite/gas/aarch64/illegal-ldapr.s: Likewise.
|
||
* testsuite/gas/aarch64/illegal-ldapr.d: Likewise.
|
||
* testsuite/gas/aarch64/illegal-ldapr.l: Likewise.
|
||
|
||
2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com>
|
||
|
||
* testsuite/gas/aarch64/fp-armv8_3.s: Add fjcvtzs test.
|
||
* testsuite/gas/aarch64/fp-armv8_3.d: Likewise.
|
||
* testsuite/gas/aarch64/illegal-fjcvtzs.s: Likewise.
|
||
* testsuite/gas/aarch64/illegal-fjcvtzs.d: Likewise.
|
||
* testsuite/gas/aarch64/illegal-fjcvtzs.l: Likewise.
|
||
* testsuite/gas/aarch64/illegal-nofp-armv8_3.s: Likewise.
|
||
* testsuite/gas/aarch64/illegal-nofp-armv8_3.d: Likewise.
|
||
* testsuite/gas/aarch64/illegal-nofp-armv8_3.l: Likewise.
|
||
|
||
2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com>
|
||
|
||
* config/tc-aarch64.c (parse_operands): Handle AARCH64_OPND_ADDR_SIMM10.
|
||
(fix_insn): Likewise.
|
||
(warn_unpredictable_ldst): Handle ldst_imm10.
|
||
* testsuite/gas/aarch64/pac.s: Add ldraa and ldrab tests.
|
||
* testsuite/gas/aarch64/pac.d: Likewise.
|
||
* testsuite/gas/aarch64/illegal-ldraa.s: New.
|
||
* testsuite/gas/aarch64/illegal-ldraa.l: New.
|
||
* testsuite/gas/aarch64/illegal-ldraa.d: New.
|
||
|
||
2016-11-15 Nick Clifton <nickc@redhat.com>
|
||
|
||
PR gas/20803
|
||
* config/tc-sparc.c (cons_fix_new_sparc): Use unaligned relocs in
|
||
the .eh_frame section.
|
||
|
||
2016-11-13 Anthony Green <green@moxielogic.org>
|
||
|
||
* config/tc-moxie.c (md_assemble): Assemble 'bad' opcode.
|
||
|
||
2016-11-11 Nick Clifton <nickc@redhat.com>
|
||
|
||
PR gas/20732
|
||
* expr.c (integer_constant): If tc_allow_L_suffix is defined and
|
||
non-zero then accept a L or LL suffix.
|
||
* testsuite/gas/sparc/pr20732.d: New test source file.
|
||
* testsuite/gas/sparc/pr20732.d: New test output file.
|
||
* testsuite/gas/sparc/sparc.exp: Run new test.
|
||
|
||
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
|
||
|
||
* testsuite/gas/aarch64/pac.s: Add ARMv8.3 branch instruction tests.
|
||
* testsuite/gas/aarch64/pac.d: Likewise.
|
||
|
||
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
|
||
|
||
* config/tc-aarch64.c (process_omitted_operand): Handle AARCH64_OPND_Rm_SP.
|
||
(parse_operands): Likewise.
|
||
* testsuite/gas/aarch64/pac.s: Add pacga.
|
||
* testsuite/gas/aarch64/pac.d: Add pacga.
|
||
|
||
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
|
||
|
||
* testsuite/gas/aarch64/pac.s: New.
|
||
* testsuite/gas/aarch64/pac.d: New.
|
||
|
||
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
|
||
|
||
* testsuite/gas/aarch64/sysreg-3.s: New.
|
||
* testsuite/gas/aarch64/sysreg-3.d: New.
|
||
* testsuite/gas/aarch64/illegal-sysreg-3.l: New.
|
||
* testsuite/gas/aarch64/illegal-sysreg-3.d: New.
|
||
|
||
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
|
||
|
||
* testsuite/gas/aarch64/system-3.s: New.
|
||
* testsuite/gas/aarch64/system-3.d: New.
|
||
* testsuite/gas/aarch64/system.d: Update expected output.
|
||
|
||
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
|
||
|
||
* config/tc-aarch64.c (aarch64_archs): Add "armv8.3-a".
|
||
* doc/c-aarch64.texi (-march): Likewise.
|
||
|
||
2016-11-11 Szabolcs Nagy <szabolcs.nagy@arm.com>
|
||
|
||
* config/tc-aarch64.c (aarch64_features): Fix "simd" and "crypto".
|
||
* testsuite/gas/aarch64/illegal-crypto-nofp.d: New.
|
||
* testsuite/gas/aarch64/illegal-crypto-nofp.l: New.
|
||
* testsuite/gas/aarch64/illegal-fp16-nofp.d: New.
|
||
* testsuite/gas/aarch64/illegal-fp16-nofp.l: New.
|
||
* testsuite/gas/aarch64/illegal-fp16-nofp.s: New.
|
||
|
||
2016-11-09 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
PR binutils/20799
|
||
* testsuite/gas/i386/opcode.s: Add a test for EVEX vpextrw.
|
||
* testsuite/gas/i386/opcode-intel.d: Updated.
|
||
* testsuite/gas/i386/opcode-suffix.d: Likewise.
|
||
* testsuite/gas/i386/opcode.d: Likewise.
|
||
* testsuite/gas/i386/x86-64-avx512bw-opts.s: Remove vpextrw
|
||
tests.
|
||
* testsuite/gas/i386/x86-64-avx512bw-opts-intel.d: Updated.
|
||
* testsuite/gas/i386/x86-64-avx512bw-opts.d: Likewise.
|
||
|
||
2016-11-09 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
PR binutils/20754
|
||
* testsuite/gas/i386/opcode-suffix.d: Updated.
|
||
|
||
2016-11-07 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
PR binutils/20775
|
||
* testsuite/gas/i386/i386.exp: Run fpu-bad.
|
||
* testsuite/gas/i386/fpu-bad.d: New file.
|
||
* testsuite/gas/i386/fpu-bad.s: Likewise.
|
||
|
||
2016-11-04 Nathan Sidwell <nathan@acm.org>
|
||
|
||
gas/
|
||
* input-scrub.c (partial_size): Make size_t.
|
||
(buffer_length): Likewise. Adjust meaning.
|
||
(struct input_save): Adjust partial_size type.
|
||
(input_scrub_reinit): New.
|
||
(input_scrub_push, input_scrub_begin): Use it.
|
||
(input_scrub_next_buffer): Fix buffer extension logic. Only scan
|
||
newly read buffer for newline.
|
||
|
||
2016-11-04 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config/tc-arc.c (find_opcode_match): Use insert function to
|
||
validate matching address type operands.
|
||
* testsuite/gas/arc/nps400-10.d: New file.
|
||
* testsuite/gas/arc/nps400-10.s: New file.
|
||
|
||
2016-11-04 Thomas Preud'homme <thomas.preudhomme@arm.com>
|
||
|
||
* config/tc-arm.c (cortex-m33): Declare new processor.
|
||
* doc/c-arm.texi (-mcpu ARM command line option): Document new
|
||
Cortex-M33 processor.
|
||
* NEWS: Mention ARM Cortex-M33 support.
|
||
|
||
2016-11-04 Thomas Preud'homme <thomas.preudhomme@arm.com>
|
||
|
||
* config/tc-arm.c (cortex-m23): Declare new processor.
|
||
* doc/c-arm.texi (-mcpu ARM command line option): Document new
|
||
Cortex-M23 processor.
|
||
* NEWS: Mention ARM Cortex-M23 support.
|
||
|
||
2016-11-04 Palmer Dabbelt <palmer@dabbelt.com>
|
||
Andrew Waterman <andrew@sifive.com>
|
||
|
||
* Makefile.am (CPU_DOCS): Add c-riscv.texi.
|
||
* Makefile.in: Regenerate.
|
||
* doc/all.texi: Set RISCV.
|
||
* doc/as.texinfo: Add RISCV options.
|
||
Add RISC-V-Dependent node.
|
||
Include c-riscv.texi.
|
||
* doc/c-riscv.texi: Rename RISC-V Options to RISC-V-Opts.
|
||
|
||
2016-11-03 Graham Markall <graham.markall@embecosm.com>
|
||
|
||
* testsuite/gas/arc/nps400-6.s: Change ldbit tests so that limm
|
||
operands are out of the range of an s9, in order to fix the test.
|
||
* testsuite/gas/arc/nps400-6.d: Updated to match new expected output.
|
||
|
||
2016-11-03 Graham Markall <graham.markall@embecosm.com>
|
||
|
||
* testsuite/gas/arc/nps-400-9.d: Added.
|
||
* testsuite/gas/arc/nps-400-9.s: Added.
|
||
|
||
2016-11-03 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config/tc-arc.c (struct arc_insn): Change type of insn field.
|
||
(md_number_to_chars_midend): Support 6- and 8-byte values.
|
||
(emit_insn0): Update debug output.
|
||
(find_opcode_match): Likewise.
|
||
(build_fake_opcode_hash_entry): Delete.
|
||
(find_special_case_long_opcode): Delete.
|
||
(find_special_case): Remove long format special case handling.
|
||
(insert_operand): Change instruction type and update debug print
|
||
format.
|
||
(assemble_insn): Change instruction type, update debug print
|
||
formats, and remove unneeded assert.
|
||
|
||
2016-11-03 Graham Markall <graham.markall@embecosm.com>
|
||
|
||
* config/tc-arc.c (assemble_insn): Replace use of ARC_SHORT with
|
||
arc_opcode_len.
|
||
|
||
2016-11-03 Graham Markall <graham.markall@embecosm.com>
|
||
|
||
* config/tc-arc.c (struct arc_insn): Replace short_insn flag with
|
||
len field.
|
||
(apply_fixups): Update to use len field.
|
||
(emit_insn0): Simplify code, making use of len field.
|
||
(md_convert_frag): Update to use len field.
|
||
(assemble_insn): Update to use len field.
|
||
|
||
2016-11-03 Siddhesh Poyarekar <siddhesh.poyarekar@linaro.org>
|
||
|
||
* config/tc-aarch64.c (aarch64_cpus): Add falkor.
|
||
* config/tc-arm.c (arm_cpus): Likewise.
|
||
* doc/c-aarch64.texi: Likewise.
|
||
* doc/c-arm.texi: Likewise.
|
||
|
||
2016-11-03 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
PR binutils/20754
|
||
* testsuite/gas/i386/opcode.s: Add tests for opcode 0x82.
|
||
* testsuite/gas/i386/opcode-intel.d: Updated.
|
||
* testsuite/gas/i386/opcode.d: Likewise.
|
||
|
||
2016-11-02 Jiong Wang <jiong.wang@arm.com>
|
||
|
||
* config/tc-arm.c (SBIT_SHIFT): New.
|
||
(T2_SBIT_SHIFT): Likewise.
|
||
(t32_insn_ok): Return TRUE for MOV in ARMv8-M Baseline.
|
||
(md_apply_fix): Try UINT16 encoding when ARM/Thumb modified immediate
|
||
encoding failed.
|
||
* testsuite/gas/arm/archv6t2-bad.s: New error case.
|
||
* testsuite/gas/arm/archv6t2-bad.l: New error match.
|
||
* testsuite/gas/arm/archv6t2.s: New testcase.
|
||
* testsuite/gas/arm/archv6t2.d: New expected result.
|
||
* testsuite/gas/arm/archv8m.s: New testcase.
|
||
* testsuite/gas/arm/archv8m-base.d: New expected result.
|
||
* testsuite/gas/arm/archv8m-main.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-main-dsp-1.d: Likewise.
|
||
|
||
2016-11-02 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
|
||
|
||
* config/tc-i386.c: (cpu_arch) Add .avx512_4vnniw.
|
||
(cpu_noarch): Add noavx512_4vnniw.
|
||
* doc/c-i386.texi: Document avx512_4vnniw, noavx512_4vnniw.
|
||
* testsuite/gas/i386/i386.exp: Run AVX512_4VNNIW tests.
|
||
* testsuite/gas/i386/avx512_4vnniwd_vl-intel.d: New test.
|
||
* testsuite/gas/i386/avx512_4vnniwd_vl.d: Ditto.
|
||
* testsuite/gas/i386/avx512_4vnniwd_vl.s: Ditto.
|
||
* testsuite/gas/i386/avx512_4vnniwd-intel.d: Ditto.
|
||
* testsuite/gas/i386/avx512_4vnniwd.d: Ditto.
|
||
* testsuite/gas/i386/avx512_4vnniwd.s: Ditto.
|
||
* testsuite/gas/i386/x86-64-avx512_4vnniwd_vl-intel.d: Ditto.
|
||
* testsuite/gas/i386/x86-64-avx512_4vnniwd_vl.d: Ditto.
|
||
* testsuite/gas/i386/x86-64-avx512_4vnniwd_vl.s: Ditto.
|
||
* testsuite/gas/i386/x86-64-avx512_4vnniwd-intel.d: Ditto.
|
||
* testsuite/gas/i386/x86-64-avx512_4vnniwd.d: Ditto.
|
||
* testsuite/gas/i386/x86-64-avx512_4vnniwd.s: Ditto.
|
||
|
||
2016-11-02 Igor Tsimbalist <igor.v.tsimbalist@intel.com>
|
||
|
||
* config/tc-i386.c (cpu_arch): Add .avx512_4fmaps.
|
||
(cpu_noarch): Add noavx512_4fmaps.
|
||
(process_operands): Handle implicit quad group.
|
||
* doc/c-i386.texi: Document avx512_4fmaps, noavx512_4fmaps.
|
||
* testsuite/gas/i386/i386.exp: Add AVX512_4FMAPS tests.
|
||
* testsuite/gas/i386/avx512_4fmaps_vl-intel.d: New test.
|
||
* testsuite/gas/i386/avx512_4fmaps_vl.d: Ditto.
|
||
* testsuite/gas/i386/avx512_4fmaps_vl.s: Ditto.
|
||
* testsuite/gas/i386/avx512_4fmaps-intel.d: Ditto.
|
||
* testsuite/gas/i386/avx512_4fmaps.d: Ditto.
|
||
* testsuite/gas/i386/avx512_4fmaps.s: Ditto.
|
||
* testsuite/gas/i386/avx512_4fmaps-warn.l: Ditto.
|
||
* testsuite/gas/i386/avx512_4fmaps-warn.s: Ditto.
|
||
* testsuite/gas/i386/avx512_4fmaps_vl-warn.l: Ditto.
|
||
* testsuite/gas/i386/avx512_4fmaps_vl-warn.s: Ditto.
|
||
* testsuite/gas/i386/x86-64-avx512_4fmaps_vl-intel.d: Ditto.
|
||
* testsuite/gas/i386/x86-64-avx512_4fmaps_vl.d: Ditto.
|
||
* testsuite/gas/i386/x86-64-avx512_4fmaps_vl.s: Ditto.
|
||
* testsuite/gas/i386/x86-64-avx512_4fmaps-intel.d: Ditto.
|
||
* testsuite/gas/i386/x86-64-avx512_4fmaps.d: Ditto.
|
||
* testsuite/gas/i386/x86-64-avx512_4fmaps.s: Ditto.
|
||
* testsuite/gas/i386/x86-64-avx512_4fmaps-warn.l: Ditto.
|
||
* testsuite/gas/i386/x86-64-avx512_4fmaps-warn.s: Ditto.
|
||
* testsuite/gas/i386/x86-64-avx512_4fmaps_vl-warn.l: Ditto.
|
||
* testsuite/gas/i386/x86-64-avx512_4fmaps_vl-warn.s: Ditto.
|
||
|
||
2016-11-01 Palmer Dabbelt <palmer@dabbelt.com>
|
||
Andrew Waterman <andrew@sifive.com>
|
||
|
||
Add support for RISC-V architecture.
|
||
* Makefile.am: Add riscv files.
|
||
* Makefile.in: Regenerate.
|
||
* NEWS: Mention the support for this architecture.
|
||
* configure.in: Define a default architecture.
|
||
* configure: Regenerate.
|
||
* configure.tgt: Add entries for riscv.
|
||
* doc/as.texinfo: Likewise.
|
||
* testsuite/gas/all/gas.exp: Expect the redef tests to fail.
|
||
* testsuite/gas/elf/elf.exp: Expect the groupauto tests to fail.
|
||
* config/tc-riscv.c: New file.
|
||
* config/tc-riscv.h: New file.
|
||
* doc/c-riscv.texi: New file.
|
||
* testsuite/gas/riscv: New directory.
|
||
* testsuite/gas/riscv/riscv.exp: New file.
|
||
* testsuite/gas/riscv/t_insns.d: New file.
|
||
* testsuite/gas/riscv/t_insns.s: New file.
|
||
|
||
2016-10-27 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config/tc-arc.c (arc_target): Delete.
|
||
(arc_target_name): Delete.
|
||
(arc_features): Delete.
|
||
(arc_mach_type): Delete.
|
||
(mach_type_specified_p): Delete.
|
||
(enum mach_selection_type): New enum.
|
||
(mach_selection_mode): New static global.
|
||
(selected_cpu): New static global.
|
||
(arc_eflag): Rename to ...
|
||
(arc_initial_eflag): ...this, and make const.
|
||
(arc_select_cpu): Update comment, new parameter, check how
|
||
previous machine type selection was made, and record this
|
||
selection. Use selected_cpu instead of old globals.
|
||
(arc_option): Remove use of arc_get_mach, instead use
|
||
arc_select_cpu to validate machine type selection. Use
|
||
selected_cpu over old globals.
|
||
(allocate_tok): Use selected_cpu over old globals.
|
||
(find_opcode_match): Likewise.
|
||
(assemble_tokens): Likewise.
|
||
(arc_cons_fix_new): Likewise.
|
||
(arc_extinsn): Likewise.
|
||
(arc_extcorereg): Likewise.
|
||
(md_begin): Update default machine type selection, use
|
||
selected_cpu over old globals.
|
||
(md_parse_option): Update machine type selection option handling,
|
||
use selected_cpu over old globals.
|
||
* testsuite/gas/arc/nps400-0.s: Add .cpu directive.
|
||
|
||
2016-10-26 Alan Modra <amodra@gmail.com>
|
||
|
||
Revert 2016-10-06 Alan Modra <amodra@gmail.com>
|
||
* config/rl78-parse.y: Do use old %name-prefix syntax.
|
||
* config/rx-parse.y: Likewise.
|
||
|
||
2016-10-21 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
* config/tc-i386.c (cpu_arch): Remove .pcommit.
|
||
* doc/c-i386.texi: Likewise.
|
||
* testsuite/gas/i386/i386.exp: Remove pcommit tests.
|
||
* testsuite/gas/i386/pcommit-intel.d: Removed.
|
||
* testsuite/gas/i386/pcommit.d: Likewise.
|
||
* testsuite/gas/i386/pcommit.s: Likewise.
|
||
* testsuite/gas/i386/x86-64-pcommit-intel.d: Likewise.
|
||
* testsuite/gas/i386/x86-64-pcommit.d: Likewise.
|
||
* testsuite/gas/i386/x86-64-pcommit.s: Likewise.
|
||
|
||
2016-10-20 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
PR binutis/20705
|
||
* testsuite/gas/i386/i386.exp: Run x86-64-opcode-bad.
|
||
* testsuite/gas/i386/x86-64-opcode-bad.d: New file.
|
||
* testsuite/gas/i386/x86-64-opcode-bad.s: Likewise.
|
||
|
||
2016-10-19 Renlin Li <renlin.li@arm.com>
|
||
|
||
* config/tc-arm.c (encode_arm_shift): Generate unpredictable warning
|
||
for register-shifted register instructions.
|
||
* testsuite/gas/arm/shift-bad-pc.d: New.
|
||
* testsuite/gas/arm/shift-bad-pc.l: New.
|
||
* testsuite/gas/arm/shift-bad-pc.s: New.
|
||
|
||
2016-10-17 Cupertino Miranda <cmiranda@synopsys.com>
|
||
|
||
* testsuite/arc/dis-inv.d: Fixed matching.
|
||
|
||
2016-10-17 Cupertino Miranda <cmiranda@synopsys.com>
|
||
|
||
* testsuite/arc/dis-inv.s: Test to validate patch.
|
||
* testsuite/arc/dis-inv.d: Likewise.
|
||
|
||
2016-10-14 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* testsuite/gas/arc/shortlimm_a7.d: New file.
|
||
* testsuite/gas/arc/shortlimm_a7.s: Likewise.
|
||
* testsuite/gas/arc/shortlimm_hs.d: Likewise.
|
||
* testsuite/gas/arc/shortlimm_hs.s: Likewise.
|
||
|
||
2016-10-11 Nick Clifton <nickc@redhat.com>
|
||
|
||
* gas/arm/tls.d: Adjust output to match change in objdump.
|
||
|
||
2016-10-11 Jiong Wang <jiong.wang@arm.com>
|
||
|
||
PR target/20666
|
||
* testsuite/gas/aarch64/alias-2.d: Update expected results.
|
||
|
||
2016-10-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
|
||
|
||
* testsuite/gas/cfi/cfi-common-1.d: Adjust regexps for mips64.
|
||
* testsuite/gas/cfi/cfi-common-2.d: Likewise.
|
||
* testsuite/gas/cfi/cfi-common-3.d: Likewise.
|
||
* testsuite/gas/cfi/cfi-common-4.d: Likewise.
|
||
* testsuite/gas/cfi/cfi-common-5.d: Likewise.
|
||
* testsuite/gas/cfi/cfi-common-7.d: Likewise.
|
||
* testsuite/gas/cfi/cfi-common-8.d: Likewise.
|
||
* testsuite/gas/cfi/cfi-common-9.d: Likewise.
|
||
* testsuite/gas/cfi/cfi-mips-1.d: Likewise.
|
||
|
||
2016-10-08 Alan Modra <amodra@gmail.com>
|
||
|
||
* Makefile.am (EXTRA_as_new_SOURCES): Add config/rl78-parse.y and
|
||
config/rx-parse.y. Move config/bfin-parse.y.
|
||
(bfin-parse.@OBJEXT@, rl78-parse.@OBJEXT@, rx-parse.@OBJEXT@): Delete.
|
||
($(srcdir)/config/rl78-defs.h): New rule.
|
||
* Makefile.in: Regenerate.
|
||
|
||
2016-10-07 Jiong Wang <jiong.wang@arm.com>
|
||
|
||
PR target/20667
|
||
* testsuite/gas/aarch64/sys-rt-reg.s: Test source for instructions using
|
||
SYS_Rt reg.
|
||
* testsuite/gas/aarch64/sys-rt-reg.d: New testcase.
|
||
|
||
2016-10-06 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* testsuite/gas/arc/leave_enter.d: New file.
|
||
* testsuite/gas/arc/leave_enter.s: Likewise.
|
||
* testsuite/gas/arc/regnames.d: Likewise.
|
||
* testsuite/gas/arc/regnames.s: Likewise.
|
||
* config/tc-arc.c (arc_parse_name): Don't match reg names against
|
||
confirmed symbol names.
|
||
|
||
2016-10-06 Alan Modra <amodra@gmail.com>
|
||
|
||
* app.c (do_scrub_chars): Move fall through comment.
|
||
* expr.c (operand): Likewise.
|
||
|
||
2016-10-06 Matthew Fortune <matthew.fortune@imgtec.com>
|
||
|
||
PR gas/20648
|
||
* dw2gencfi.c (dot_cfi_sections): Refine the check for
|
||
inconsistent .cfi_sections to only consider compact vs non
|
||
compact forms.
|
||
* testsuite/gas/cfi/cfi-common-9.d: New file.
|
||
* testsuite/gas/cfi/cfi-common-9.s: New file.
|
||
* testsuite/gas/cfi/cfi.exp: Run new test.
|
||
|
||
2016-10-06 Alan Modra <amodra@gmail.com>
|
||
|
||
* app.c: Add missing fall through comments.
|
||
* dw2gencfi.c: Likewise.
|
||
* expr.c: Likewise.
|
||
* config/tc-alpha.c: Likewise.
|
||
* config/tc-arc.c: Likewise.
|
||
* config/tc-arm.c: Likewise.
|
||
* config/tc-cr16.c: Likewise.
|
||
* config/tc-crx.c: Likewise.
|
||
* config/tc-dlx.c: Likewise.
|
||
* config/tc-h8300.c: Likewise.
|
||
* config/tc-hppa.c: Likewise.
|
||
* config/tc-i370.c: Likewise.
|
||
* config/tc-i386.c: Likewise.
|
||
* config/tc-i960.c: Likewise.
|
||
* config/tc-ia64.c: Likewise.
|
||
* config/tc-m68hc11.c: Likewise.
|
||
* config/tc-m68k.c: Likewise.
|
||
* config/tc-mep.c: Likewise.
|
||
* config/tc-metag.c: Likewise.
|
||
* config/tc-microblaze.c: Likewise.
|
||
* config/tc-mips.c: Likewise.
|
||
* config/tc-ns32k.c: Likewise.
|
||
* config/tc-rx.c: Likewise.
|
||
* config/tc-score.c: Likewise.
|
||
* config/tc-score7.c: Likewise.
|
||
* config/tc-sh.c: Likewise.
|
||
* config/tc-tic4x.c: Likewise.
|
||
* config/tc-vax.c: Likewise.
|
||
* config/tc-xstormy16.c: Likewise.
|
||
* config/tc-z80.c: Likewise.
|
||
* config/tc-z8k.c: Likewise.
|
||
* config/obj-elf.c: Likewise.
|
||
* config/tc-i386.c: Likewise.
|
||
* depend.c: Spell fall through comments consistently.
|
||
* config/tc-arm.c: Likewise.
|
||
* config/tc-d10v.c: Likewise.
|
||
* config/tc-i960.c: Likewise.
|
||
* config/tc-ia64.c: Likewise.
|
||
* config/tc-m68k.c: Likewise.
|
||
* config/tc-mcore.c: Likewise.
|
||
* config/tc-mep.c: Likewise.
|
||
* config/tc-ns32k.c: Likewise.
|
||
* config/tc-visium.c: Likewise.
|
||
* config/tc-xstormy16.c: Likewise.
|
||
* config/tc-z8k.c: Likewise.
|
||
|
||
2016-10-06 Alan Modra <amodra@gmail.com>
|
||
|
||
* as.h (as_assert): Add ATTRIBUTE_NORETURN.
|
||
|
||
2016-10-06 Alan Modra <amodra@gmail.com>
|
||
|
||
* config/tc-arc.c (find_opcode_match): Add missing break.
|
||
* config/tc-i960.c (get_cdisp): Likewise.
|
||
* config/tc-metag.c (parse_swap, md_apply_fix): Likewise.
|
||
* config/tc-mt.c (md_parse_option): Likewise.
|
||
* config/tc-nds32.c (nds32_apply_fix): Likewise.
|
||
* config/tc-hppa.c (pa_ip): Assert rather than testing last
|
||
condition of multiple if statements.
|
||
* config/tc-s390.c (s390_exp_compare): Return 0 on error.
|
||
* config/tc-tic4x.c (tic4x_operand_parse): Add as_bad and break
|
||
out of case rather than falling into next case. Formatting.
|
||
|
||
2016-10-06 Alan Modra <amodra@gmail.com>
|
||
|
||
* config/rl78-parse.y: Don't use deprecated %name-prefix.
|
||
* config/rx-parse.y: Likewise.
|
||
|
||
2016-09-29 Jiong Wang <jiong.wang@arm.com>
|
||
|
||
PR target/20553
|
||
* testsuite/gas/aarch64/advsimd-fp16.s (indexed_elem): New high index
|
||
testcases for H and S variants. New low index testcases for D variant.
|
||
* testsuite/gas/aarch64/advsimd-fp16.d: Update expected results.
|
||
|
||
2016-09-29 Alan Modra <amodra@gmail.com>
|
||
|
||
* config/tc-ppc.c (md_assemble): Handle PPC_OPERAND_OPTIONAL32.
|
||
* testsuite/gas/ppc/power8.s: Provide tbegin. operand.
|
||
* testsuite/gas/ppc/power9.d: Update cmprb disassembly.
|
||
|
||
2016-09-26 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-xtensa.c (xg_reverse_shift_count): Pass cnt_arg instead of
|
||
cnt_argp to concat.
|
||
|
||
2016-09-26 Vlad Zakharov <vzakhar@synopsys.com>
|
||
|
||
* Makefile.in: Regenerate.
|
||
* configure: Likewise.
|
||
* doc/Makefile.in: Likewise.
|
||
|
||
2016-09-26 Alan Modra <amodra@gmail.com>
|
||
|
||
* config/tc-ppc.c (ppc_elf_gnu_attribute): New function.
|
||
(md_pseudo_table <ELF>): Handle "gnu_attribute".
|
||
|
||
2016-09-22 Thomas Preud'homme <thomas.preudhomme@arm.com>
|
||
|
||
* config/tc-arm.c (v7m_psrs): Remove BASEPRI_MASK MRS/MSR special
|
||
register and redundant basepri_max.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (print_operands): Print spaces between
|
||
operands.
|
||
* testsuite/gas/aarch64/ilp32-basic.d: Expect spaces after ","
|
||
in addresses.
|
||
* testsuite/gas/aarch64/ldst-reg-imm-post-ind.d: Likewise.
|
||
* testsuite/gas/aarch64/ldst-reg-imm-pre-ind.d: Likewise.
|
||
* testsuite/gas/aarch64/ldst-reg-pair.d: Likewise.
|
||
* testsuite/gas/aarch64/ldst-reg-reg-offset.d: Likewise.
|
||
* testsuite/gas/aarch64/ldst-reg-uns-imm.d: Likewise.
|
||
* testsuite/gas/aarch64/ldst-reg-unscaled-imm.d: Likewise.
|
||
* testsuite/gas/aarch64/reloc-insn.d: Likewise.
|
||
* testsuite/gas/aarch64/sve.d: Likewise.
|
||
* testsuite/gas/aarch64/symbol.d: Likewise.
|
||
* testsuite/gas/aarch64/system.d: Likewise.
|
||
* testsuite/gas/aarch64/tls-desc.d: Likewise.
|
||
* testsuite/gas/aarch64/sve-invalid.l: Expect spaces after ","
|
||
in suggested alternatives.
|
||
* testsuite/gas/aarch64/verbose-error.l: Likewise.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (output_operand_error_record): Use "must be"
|
||
rather than "should be" or "expected to be" in error messages.
|
||
(parse_operands): Likewise.
|
||
* testsuite/gas/aarch64/diagnostic.l: Likewise.
|
||
* testsuite/gas/aarch64/legacy_reg_names.l: Likewise.
|
||
* testsuite/gas/aarch64/sve-invalid.l: Likewise.
|
||
* testsuite/gas/aarch64/sve-reg-diagnostic.l: Likewise.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (opcode_lookup): Search for the end of
|
||
a condition name, rather than assuming that it will have exactly
|
||
2 characters.
|
||
(parse_operands): Likewise.
|
||
* testsuite/gas/aarch64/alias.d: Add new condition-code comments
|
||
to the expected output.
|
||
* testsuite/gas/aarch64/beq_1.d: Likewise.
|
||
* testsuite/gas/aarch64/float-fp16.d: Likewise.
|
||
* testsuite/gas/aarch64/int-insns.d: Likewise.
|
||
* testsuite/gas/aarch64/no-aliases.d: Likewise.
|
||
* testsuite/gas/aarch64/programmer-friendly.d: Likewise.
|
||
* testsuite/gas/aarch64/reloc-insn.d: Likewise.
|
||
* testsuite/gas/aarch64/b_c_1.d, testsuite/gas/aarch64/b_c_1.s:
|
||
New test.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* testsuite/gas/aarch64/diagnostic.s,
|
||
testsuite/gas/aarch64/diagnostic.l: Add tests for
|
||
invalid uses of MUL VL and MUL in base AArch64 instructions.
|
||
* testsuite/gas/aarch64/sve-add.s, testsuite/gas/aarch64/sve-add.d,
|
||
testsuite/gas/aarch64/sve-dup.s, testsuite/gas/aarch64/sve-dup.d,
|
||
testsuite/gas/aarch64/sve-invalid.s,
|
||
testsuite/gas/aarch64/sve-invalid.d,
|
||
testsuite/gas/aarch64/sve-invalid.l,
|
||
testsuite/gas/aarch64/sve-reg-diagnostic.s,
|
||
testsuite/gas/aarch64/sve-reg-diagnostic.d,
|
||
testsuite/gas/aarch64/sve-reg-diagnostic.l,
|
||
testsuite/gas/aarch64/sve.s, testsuite/gas/aarch64/sve.d: New tests.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* doc/c-aarch64.texi: Document the "sve" feature.
|
||
* config/tc-aarch64.c (REG_TYPE_R_Z_BHSDQ_VZP): New register type.
|
||
(get_reg_expected_msg): Handle it.
|
||
(parse_operands): When parsing operands of an SVE instruction,
|
||
disallow immediates that match REG_TYPE_R_Z_BHSDQ_VZP.
|
||
(aarch64_features): Add an entry for SVE.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (parse_operands): Handle the new SVE core
|
||
and FP register operands.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (double_precision_operand_p): New function.
|
||
(parse_operands): Use it to calculate the dp_p input to
|
||
parse_aarch64_imm_float. Handle the new SVE FP immediate operands.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (parse_operands): Handle the new SVE integer
|
||
immediate operands.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (SHIFTED_NONE, SHIFTED_MUL_VL): New
|
||
parse_shift_modes.
|
||
(parse_shift): Handle SHIFTED_MUL_VL.
|
||
(parse_address_main): Add an imm_shift_mode parameter.
|
||
(parse_address, parse_sve_address): Update accordingly.
|
||
(parse_operands): Handle MUL VL addressing modes.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (REG_TYPE_SVE_BASE, REG_TYPE_SVE_OFFSET): New
|
||
register types.
|
||
(get_reg_expected_msg): Handle them.
|
||
(aarch64_addr_reg_parse): New function, split out from
|
||
aarch64_reg_parse_32_64. Handle Z registers too.
|
||
(aarch64_reg_parse_32_64): Call it.
|
||
(parse_address_main): Add base_qualifier, offset_qualifier,
|
||
base_type and offset_type parameters. Handle SVE base and offset
|
||
registers.
|
||
(parse_address): Update call to parse_address_main.
|
||
(parse_sve_address): New function.
|
||
(parse_operands): Parse the new SVE address operands.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (SHIFTED_MUL): New parse_shift_mode.
|
||
(parse_shift): Handle it. Reject AARCH64_MOD_MUL for all other
|
||
shift modes. Skip range tests for AARCH64_MOD_MUL.
|
||
(process_omitted_operand): Handle AARCH64_OPND_SVE_PATTERN_SCALED.
|
||
(parse_operands): Likewise.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (parse_enum_string): New function.
|
||
(po_enum_or_fail): New macro.
|
||
(parse_operands): Handle AARCH64_OPND_SVE_PATTERN and
|
||
AARCH64_OPND_SVE_PRFOP.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (vector_el_type): Add NT_zero and NT_merge.
|
||
(parse_vector_type_for_operand): Assert that the skipped character
|
||
is a '.'.
|
||
(parse_predication_for_operand): New function.
|
||
(parse_typed_reg): Parse /z and /m suffixes for predicate registers.
|
||
(vectype_to_qualifier): Handle NT_zero and NT_merge.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (NTA_HASVARWIDTH): New macro.
|
||
(AARCH64_REG_TYPES): Add ZN and PN.
|
||
(get_reg_expected_msg): Handle them.
|
||
(parse_vector_type_for_operand): Add a reg_type parameter.
|
||
Skip the width for Zn and Pn registers.
|
||
(parse_typed_reg): Extend vector handling to Zn and Pn. Update the
|
||
call to parse_vector_type_for_operand. Set HASVARTYPE for Zn and Pn,
|
||
expecting the width to be 0.
|
||
(parse_vector_reg_list): Restrict error about [BHSD]nn operands to
|
||
REG_TYPE_VN.
|
||
(vectype_to_qualifier): Use S_[BHSD] qualifiers for NTA_HASVARWIDTH.
|
||
(parse_operands): Handle the new Zn and Pn operands.
|
||
(REGSET16): New macro, split out from...
|
||
(REGSET31): ...here.
|
||
(reg_names): Add Zn and Pn entries.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (output_operand_error_record): Handle
|
||
AARCH64_OPDE_UNTIED_OPERAND.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (find_best_match): Simplify, allowing an
|
||
instruction with all-NIL qualifiers to fail to match.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (parse_address_main): Remove reloc and
|
||
accept_reg_post_index parameters. Parse relocations and register
|
||
post indexes unconditionally.
|
||
(parse_address): Remove accept_reg_post_index parameter.
|
||
Update call to parse_address_main.
|
||
(parse_address_reloc): Delete.
|
||
(parse_operands): Call parse_address instead of parse_address_main.
|
||
Update existing callers of parse_address and make them check
|
||
inst.reloc.type where appropriate.
|
||
* testsuite/gas/aarch64/diagnostic.s: Add tests for relocations
|
||
in ADDR_SIMPLE, SIMD_ADDR_SIMPLE, ADDR_SIMM7 and ADDR_SIMM9 addresses.
|
||
Also test for invalid uses of post-index register addressing.
|
||
* testsuite/gas/aarch64/diagnostic.l: Update accordingly.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (REG_TYPE_R_Z, REG_TYPE_R_SP): New register
|
||
types.
|
||
(get_reg_expected_msg): Handle them and REG_TYPE_R64_SP.
|
||
(aarch64_check_reg_type): Simplify.
|
||
(aarch64_reg_parse_32_64): Return the reg_entry instead of the
|
||
register number. Return the type as a qualifier rather than an
|
||
"isreg32" boolean. Remove reject_sp, reject_rz and isregzero
|
||
parameters.
|
||
(parse_shifter_operand): Update call to aarch64_parse_32_64_reg.
|
||
Use get_reg_expected_msg.
|
||
(parse_address_main): Likewise. Use aarch64_check_reg_type.
|
||
(po_int_reg_or_fail): Replace reject_sp and reject_rz parameters
|
||
with a reg_type parameter. Update call to aarch64_parse_32_64_reg.
|
||
Use aarch64_check_reg_type to test the result.
|
||
(parse_operands): Update after the above changes. Parse ADDR_SIMPLE
|
||
addresses normally before enforcing the syntax restrictions.
|
||
* testsuite/gas/aarch64/diagnostic.s: Add tests for a post-index
|
||
zero register and for a stack pointer index.
|
||
* testsuite/gas/aarch64/diagnostic.l: Update accordingly.
|
||
Also update existing diagnostic messages after the above changes.
|
||
* testsuite/gas/aarch64/illegal-lse.l: Update the error message
|
||
for 32-bit register bases.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (parse_aarch64_imm_float): Remove range check.
|
||
(parse_operands): Check the range of 8-bit FP immediates here instead.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (parse_aarch64_imm_float): Report a specific
|
||
low-severity error for registers.
|
||
(parse_operands): Report an invalid floating point constant for
|
||
if parsing an FPIMM8 fails, and if no better error has been
|
||
recorded.
|
||
* testsuite/gas/aarch64/diagnostic.s,
|
||
testsuite/gas/aarch64/diagnostic.l: Add tests for integer operands
|
||
to FMOV.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (aarch64_double_precision_fmovable): Rename
|
||
to...
|
||
(can_convert_double_to_float): ...this. Accept any double-precision
|
||
value that converts to single precision without loss of precision.
|
||
(parse_aarch64_imm_float): Update accordingly.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (parse_immediate_expression): Add a
|
||
reg_type parameter.
|
||
(parse_constant_immediate): Likewise, and update calls.
|
||
(parse_aarch64_imm_float): Likewise.
|
||
(parse_big_immediate): Likewise.
|
||
(po_imm_nc_or_fail): Update accordingly, passing down a new
|
||
imm_reg_type variable.
|
||
(po_imm_of_fail): Likewise.
|
||
(parse_operands): Likewise.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (parse_neon_reg_list): Rename to...
|
||
(parse_vector_reg_list): ...this and take a register type
|
||
as input.
|
||
(parse_operands): Update accordingly.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (parse_neon_type_for_operand): Rename to...
|
||
(parse_vector_type_for_operand): ...this.
|
||
(parse_typed_reg): Update accordingly.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (neon_type_el): Rename to...
|
||
(vector_type_el): ...this.
|
||
(parse_neon_type_for_operand): Update accordingly.
|
||
(parse_typed_reg): Likewise.
|
||
(aarch64_reg_parse): Likewise.
|
||
(vectype_to_qualifier): Likewise.
|
||
(parse_operands): Likewise.
|
||
(eq_neon_type_el): Likewise. Rename to...
|
||
(eq_vector_type_el): ...this.
|
||
(parse_neon_reg_list): Update accordingly.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (neon_el_type: Rename to...
|
||
(vector_el_type): ...this.
|
||
(neon_type_el): Update accordingly.
|
||
(parse_neon_type_for_operand): Likewise.
|
||
(vectype_to_qualifier): Likewise.
|
||
|
||
2016-09-21 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (parse_neon_operand_type): Delete.
|
||
(parse_typed_reg): Call parse_neon_type_for_operand directly.
|
||
|
||
2016-09-15 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* testsuite/gas/arc/textinsnxop.d: New file.
|
||
* testsuite/gas/arc/textinsnxop.s: Likewise.
|
||
|
||
2016-09-15 Jose E. Marchesi <jose.marchesi@oracle.com>
|
||
|
||
* testsuite/gas/sparc/sparc.exp (gas_64_check): Run
|
||
dcti-couples-v9 only in ELF targets to avoid spurious failures in
|
||
sparc-aout and sparc-coff targets.
|
||
|
||
2016-09-14 Peter Bergner <bergner@vnet.ibm.com>
|
||
|
||
* testsuite/gas/ppc/power9.d <slbiag, cpabort> New tests.
|
||
<addex., brd, brh, brw, lwzmx, nandxor, rldixor, setbool,
|
||
xor3, cp_abort, copy_first, paste, paste_last, sync>: Remove tests.
|
||
<copy, paste.>: Update tests.
|
||
* testsuite/gas/ppc/power9.s: Likewise.
|
||
|
||
2016-09-14 Jose E. Marchesi <jose.marchesi@oracle.com>
|
||
|
||
* config/tc-sparc.c (sparc_ip): Print the instruction arguments
|
||
in "architecture mismatch" error messages.
|
||
|
||
2016-09-14 Jose E. Marchesi <jose.marchesi@oracle.com>
|
||
|
||
* config/tc-sparc.c (md_assemble): Detect and warning on
|
||
unpredictable DCTI couples in certain arches.
|
||
(dcti_couples_detect): New global.
|
||
(md_longopts): Add command line option -dcti-couples-detect.
|
||
(md_show_usage): Document -dcti-couples-detect.
|
||
(md_parse_option): Handle OPTION_DCTI_COUPLES_DETECT.
|
||
* testsuite/gas/sparc/sparc.exp (gas_64_check): Run
|
||
dcti-couples-v8, dcti-couples-v9 and dcti-couples-v9c tests.
|
||
* testsuite/gas/sparc/dcti-couples.s: New file.
|
||
* testsuite/gas/sparc/dcti-couples-v9c.d: Likewise.
|
||
* testsuite/gas/sparc/dcti-couples-v8.d: Likewise.
|
||
* testsuite/gas/sparc/dcti-couples-v9.d: Likewise.
|
||
* testsuite/gas/sparc/dcti-couples-v9c.l: Likewise.
|
||
* testsuite/gas/sparc/dcti-couples-v8.l: Likewise.
|
||
* doc/as.texinfo (Overview): Document --dcti-couples-detect.
|
||
* doc/c-sparc.texi (Sparc-Opts): Likewise.
|
||
|
||
2016-09-14 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* testsuite/gas/arc/tls-relocs2.d: New file.
|
||
* testsuite/gas/arc/tls-relocs2.s: Likewise.
|
||
* config/tc-arc.c (tokenize_arguments): Accept offsets when base
|
||
is used.
|
||
|
||
2016-09-12 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
|
||
|
||
* config/tc-s390.c (s390_parse_cpu): Support alternate arch
|
||
strings.
|
||
* doc/as.texinfo: Document new arch strings.
|
||
* doc/c-s390.texi: Likewise.
|
||
|
||
2016-09-12 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
|
||
|
||
* config/tc-s390.c: Set all facitily bits by default
|
||
|
||
2016-09-12 Patrick Steuer <steuer@linux.vnet.ibm.com>
|
||
|
||
* testsuite/gas/s390/zarch-z196.d: Adjust testcase.
|
||
|
||
2016-09-08 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
* config/tc-i386.c (i386_target_format): Allow PROCESSOR_IAMCU
|
||
for Intel MCU.
|
||
|
||
2016-09-07 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
* config/tc-i386.c (valid_iamcu_cpu_flags): Removed.
|
||
(set_cpu_arch): Updated.
|
||
(md_parse_option): Likewise.
|
||
* testsuite/gas/i386/i386.exp: Run iamcu-4 and iamcu-5. Remove
|
||
iamcu-inval-2 and iamcu-inval-3.
|
||
* testsuite/gas/i386/iamcu-4.d: New file.
|
||
* testsuite/gas/i386/iamcu-4.s: Likewise.
|
||
* testsuite/gas/i386/iamcu-5.d: Likewise.
|
||
* testsuite/gas/i386/iamcu-5.s: Likewise.
|
||
* testsuite/gas/i386/iamcu-inval-2.l: Removed.
|
||
* testsuite/gas/i386/iamcu-inval-2.s: Likewise.
|
||
* testsuite/gas/i386/iamcu-inval-3.l: Likewise.
|
||
* testsuite/gas/i386/iamcu-inval-3.s: Likewise.
|
||
|
||
2016-09-07 Richard Earnshaw <rearnsha@arm.com>
|
||
|
||
* config/tc-arm.c ((arm_cpus): Use ARM_ARCH_V8A_CRC for all
|
||
ARMv8-A CPUs except xgene1.
|
||
|
||
2016-08-31 Alan Modra <amodra@gmail.com>
|
||
|
||
* config/tc-ppc.c (md_assemble): Set sh_flags for VLE. Test
|
||
ppc_cpu rather than calling ppc_mach to determine VLE mode.
|
||
(ppc_frag_check, ppc_handle_align): Likewise use ppc_cpu.
|
||
|
||
2016-08-26 Jose E. Marchesi <jose.marchesi@oracle.com>
|
||
|
||
* testsuite/gas/sparc/crypto.d: Rename invalid opcode camellia_fi
|
||
to camellia_fl.
|
||
* testsuite/gas/sparc/crypto.s: Likewise.
|
||
|
||
2016-08-26 Thomas Preud'homme <thomas.preudhomme@arm.com>
|
||
|
||
* config/tc-arm.c (v7m_psrs): Add MSPLIM, PSPLIM, MSPLIM_NS,
|
||
PSPLIM_NS, PRIMASK_NS, BASEPRI_NS, FAULTMASK_NS, CONTROL_NS, SP_NS and
|
||
their lowecase counterpart special registers. Write register
|
||
identifier in hex.
|
||
* testsuite/gas/arm/archv8m-cmse-msr.s: Reorganize tests per
|
||
operation, special register and then case. Use different register for
|
||
each operation. Add tests for new special registers.
|
||
* testsuite/gas/arm/archv8m-cmse-msr-base.d: Adapt expected result
|
||
accordingly.
|
||
* testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-main-dsp-4.d: Likewise.
|
||
|
||
2016-08-25 Thomas Preud'homme <thomas.preudhomme@arm.com>
|
||
|
||
* config/tc-arm.c (v7m_psrs): Remove msp_s, MSP_S, psp_s and PSP_S
|
||
special registers.
|
||
* testsuite/gas/arm/archv8m-cmse-msr.s: Remove test for above special
|
||
registers.
|
||
* testsuite/gas/arm/archv8m-cmse-msr-base.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-main-dsp-4.d: Likewise.
|
||
|
||
2016-08-24 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
* config/tc-i386.c (cpu_arch): Add .ptwrite.
|
||
* doc/c-i386.texi: Document ptwrite and .ptwrite.
|
||
* testsuite/gas/i386/i386.exp: Run ptwrite, ptwrite-intel,
|
||
x86-64-ptwrite and x86-64-ptwrite-intel.
|
||
* testsuite/gas/i386/ptwrite-intel.d: New file.
|
||
* testsuite/gas/i386/ptwrite.d: Likewise.
|
||
* testsuite/gas/i386/ptwrite.s: Likewise.
|
||
* testsuite/gas/i386/x86-64-ptwrite-intel.d: Likewise.
|
||
* testsuite/gas/i386/x86-64-ptwrite.d: Likewise.
|
||
* testsuite/gas/i386/x86-64-ptwrite.s: Likewise.
|
||
|
||
2016-08-19 Tamar Christina <tamar.christina@arm.com>
|
||
|
||
* config/tc-arm.c (do_co_reg2c): Added constraint.
|
||
* testsuite/gas/arm/dest-unpredictable.s: New.
|
||
* testsuite/gas/arm/dest-unpredictable.l: New.
|
||
* testsuite/gas/arm/dest-unpredictable.d: New.
|
||
|
||
2016-08-19 Nick Clifton <nickc@redhat.com>
|
||
|
||
* testsuite/gas/i386/ilp32/x86-64-unwind.d: Adjust expected
|
||
ordering of sections.
|
||
* testsuite/gas/i386/x86-64-unwind.d: Likewise.
|
||
* testsuite/gas/ia64/alias-ilp32.d: Likewise.
|
||
* testsuite/gas/ia64/alias.d: Likewise.
|
||
* testsuite/gas/ia64/group-1.d: Likewise.
|
||
* testsuite/gas/ia64/group-2.d: Likewise.
|
||
* testsuite/gas/ia64/secname-ilp32.d: Likewise.
|
||
* testsuite/gas/ia64/secname.d: Likewise.
|
||
* testsuite/gas/ia64/unwind-ilp32.d: Likewise.
|
||
* testsuite/gas/ia64/unwind.d: Likewise.
|
||
* testsuite/gas/ia64/xdata-ilp32.d: Likewise.
|
||
* testsuite/gas/ia64/xdata.d: Likewise.
|
||
* testsuite/gas/mmix/bspec-1.d: Likewise.
|
||
* testsuite/gas/mmix/bspec-2.d: Likewise.
|
||
* testsuite/gas/mmix/byte-1.d: Likewise.
|
||
* testsuite/gas/mmix/loc-1.d: Likewise.
|
||
* testsuite/gas/mmix/loc-2.d: Likewise.
|
||
* testsuite/gas/mmix/loc-3.d: Likewise.
|
||
* testsuite/gas/mmix/loc-4.d: Likewise.
|
||
* testsuite/gas/mmix/loc-5.d: Likewise.
|
||
* testsuite/gas/tic6x/scomm-directive-4.d: Likewise.
|
||
|
||
2016-08-11 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* config/tc-aarch64.c (parse_aarch64_imm_float): Reject -0.0.
|
||
* testsuite/gas/aarch64/illegal.s, testsuite/gas/aarch64/illegal.l:
|
||
Add tests for -0.0. Add an end-of-file comment.
|
||
|
||
2016-08-05 Nick Clifton <nickc@redhat.com>
|
||
|
||
PR gas/20429
|
||
* config/tc-arm.c (do_vfp_nsyn_push): Check that no more than 16
|
||
registers are pushed.
|
||
(do_vfp_nsyn_pop): Check that no more than 16 registers are
|
||
popped.
|
||
* testsuite/gas/arm/pr20429.s: New test.
|
||
* testsuite/gas/arm/pr20429.d: New test driver.
|
||
* testsuite/gas/arm/pr20429.1: Expected error output.
|
||
|
||
PR gas/20364
|
||
* config/tc-aarch64.c (s_ltorg): Change the mapping state after
|
||
aligning the frag.
|
||
(aarch64_init): Treat rs_align frags in code sections as
|
||
containing code, not data.
|
||
* testsuite/gas/aarch64/pr20364.s: New test.
|
||
* testsuite/gas/aarch64/pr20364.d: New test driver.
|
||
|
||
2016-08-04 Stefan Trleman <stefan.teleman@oracle.com>
|
||
|
||
PR gas/20427
|
||
* config/tc-sparc.c (cons_fix_new_sparc): Prevent the generation
|
||
of 64-bit relocation types when assembling for a 32-bit Solaris
|
||
target.
|
||
|
||
2016-07-27 Jose E. Marchesi <jose.marchesi@oracle.com>
|
||
|
||
* testsuite/gas/sparc/sparc.exp: Use is_elf_format to discriminate
|
||
ELF targets.
|
||
Run natural, natural-32, pr4587, ticc-imm-reg, v8-movwr-imm,
|
||
pause, save-args, cbcond, cfr, crypto edge, flush, hpcvis3, ima,
|
||
ld_st_fsr, ldtw_sttw, ldd_std, ldx_stx, ldx_efsr, mwait, mcdper,
|
||
sparc5vis4, xcrypto, v9branch1 and imm-plus-rreg only in ELF
|
||
targets.
|
||
(sparc_elf_setup): Delete.
|
||
* testsuite/gas/sparc/save-args.d: Fix a copy-paste typo in the
|
||
test's #name entry.
|
||
|
||
2016-07-27 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (RELAX_MICROMIPS_ENCODE): Add `nods' flag.
|
||
(RELAX_MICROMIPS_RELAX32, RELAX_MICROMIPS_TOOFAR16)
|
||
(RELAX_MICROMIPS_MARK_TOOFAR16, RELAX_MICROMIPS_CLEAR_TOOFAR16)
|
||
(RELAX_MICROMIPS_TOOFAR32, RELAX_MICROMIPS_MARK_TOOFAR32)
|
||
(RELAX_MICROMIPS_CLEAR_TOOFAR32): Shift bits.
|
||
(get_append_method): Also return APPEND_ADD_COMPACT for
|
||
microMIPS instructions.
|
||
(find_altered_mips16_opcode): Exclude macros from matching.
|
||
Factor code out...
|
||
(find_altered_opcode): ... to this new function.
|
||
(find_altered_micromips_opcode): New function.
|
||
(frag_branch_delay_slot_size): Likewise.
|
||
(append_insn): Handle microMIPS branch/jump compaction.
|
||
(macro_start): Likewise.
|
||
(relaxed_micromips_32bit_branch_length): Likewise.
|
||
(md_convert_frag): Likewise.
|
||
* testsuite/gas/mips/micromips.s: Add conditional explicit NOPs
|
||
for delay slot filling.
|
||
* testsuite/gas/mips/micromips-b16.s: Add explicit NOPs for
|
||
delay slot filling.
|
||
* testsuite/gas/mips/micromips-size-1.s: Likewise.
|
||
* testsuite/gas/mips/micromips.l: Adjust line numbers.
|
||
* testsuite/gas/mips/micromips-warn.l: Likewise.
|
||
* testsuite/gas/mips/micromips-size-1.l: Likewise.
|
||
* testsuite/gas/mips/micromips.d: Adjust padding.
|
||
* testsuite/gas/mips/micromips-trap.d: Likewise.
|
||
* testsuite/gas/mips/micromips-insn32.d: Likewise.
|
||
* testsuite/gas/mips/micromips-noinsn32.d: Likewise.
|
||
* testsuite/gas/mips/micromips@beq.d: Update patterns for
|
||
branch/jump compaction.
|
||
* testsuite/gas/mips/micromips@bge.d: Likewise.
|
||
* testsuite/gas/mips/micromips@bgeu.d: Likewise.
|
||
* testsuite/gas/mips/micromips@blt.d: Likewise.
|
||
* testsuite/gas/mips/micromips@bltu.d: Likewise.
|
||
* testsuite/gas/mips/micromips@branch-misc-4.d: Likewise.
|
||
* testsuite/gas/mips/micromips@branch-misc-4-64.d: Likewise.
|
||
* testsuite/gas/mips/micromips@branch-misc-5.d: Likewise.
|
||
* testsuite/gas/mips/micromips@branch-misc-5pic.d: Likewise.
|
||
* testsuite/gas/mips/micromips@branch-misc-5-64.d: Likewise.
|
||
* testsuite/gas/mips/micromips@branch-misc-5pic-64.d: Likewise.
|
||
* testsuite/gas/mips/micromips@jal-svr4pic-local.d: Likewise.
|
||
* testsuite/gas/mips/micromips@jal-svr4pic-local-n32.d:
|
||
Likewise.
|
||
* testsuite/gas/mips/micromips@jal-svr4pic-local-n64.d:
|
||
Likewise.
|
||
* testsuite/gas/mips/micromips@loc-swap.d: Likewise.
|
||
* testsuite/gas/mips/micromips@loc-swap-dis.d: Likewise.
|
||
* testsuite/gas/mips/micromips@relax.d: Likewise.
|
||
* testsuite/gas/mips/micromips@relax-at.d: Likewise.
|
||
* testsuite/gas/mips/micromips@relax-swap3.d: Likewise.
|
||
* testsuite/gas/mips/branch-extern-2.d: Likewise.
|
||
* testsuite/gas/mips/branch-extern-4.d: Likewise.
|
||
* testsuite/gas/mips/branch-section-2.d: Likewise.
|
||
* testsuite/gas/mips/branch-section-4.d: Likewise.
|
||
* testsuite/gas/mips/branch-weak-2.d: Likewise.
|
||
* testsuite/gas/mips/branch-weak-5.d: Likewise.
|
||
* testsuite/gas/mips/micromips-branch-absolute.d: Likewise.
|
||
* testsuite/gas/mips/micromips-branch-absolute-n32.d: Likewise.
|
||
* testsuite/gas/mips/micromips-branch-absolute-n64.d: Likewise.
|
||
* testsuite/gas/mips/micromips-branch-absolute-addend.d:
|
||
Likewise.
|
||
* testsuite/gas/mips/micromips-branch-absolute-addend-n32.d:
|
||
Likewise.
|
||
* testsuite/gas/mips/micromips-branch-absolute-addend-n64.d:
|
||
Likewise.
|
||
* testsuite/gas/mips/micromips-compact.d: New test.
|
||
* testsuite/gas/mips/mips.exp: Run the new test.
|
||
|
||
2016-07-27 Graham Markall <graham.markall@embecosm.com>
|
||
|
||
* config/tc-arc.c: Add new global arc_addrtype_hash.
|
||
Define O_colon and O_addrtype.
|
||
(debug_exp): Add O_colon and O_addrtype.
|
||
(tokenize_arguments): Handle colon and address type
|
||
tokens.
|
||
(declare_addrtype): New function.
|
||
(md_begin): Initialise arc_addrtype_hash.
|
||
(arc_parse_name): Add lookup of address types.
|
||
(assemble_insn): Handle colons and address types by
|
||
ignoring them.
|
||
* testsuite/gas/arc/nps400-8.s: New file.
|
||
* testsuite/gas/arc/nps400-8.d: New file.
|
||
* testsuite/gas/arc/nps400-8.s: Add PMU instruction tests.
|
||
* testsuite/gas/arc/nps400-8.d: Add expected PMU
|
||
instruction output.
|
||
|
||
2016-07-26 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (RELAX_MICROMIPS_ENCODE): Add `insn32' flag.
|
||
(RELAX_MICROMIPS_INSN32): New macro.
|
||
(RELAX_MICROMIPS_UNCOND, RELAX_MICROMIPS_COMPACT)
|
||
(RELAX_MICROMIPS_LINK, RELAX_MICROMIPS_RELAX32)
|
||
(RELAX_MICROMIPS_TOOFAR16, RELAX_MICROMIPS_MARK_TOOFAR16)
|
||
(RELAX_MICROMIPS_CLEAR_TOOFAR16, RELAX_MICROMIPS_TOOFAR32)
|
||
(RELAX_MICROMIPS_MARK_TOOFAR32, RELAX_MICROMIPS_CLEAR_TOOFAR32):
|
||
Shift bits.
|
||
(append_insn): Record `mips_opts.insn32' with relaxed microMIPS
|
||
branches.
|
||
(relaxed_micromips_32bit_branch_length): Handle the `insn32'
|
||
mode.
|
||
(md_convert_frag): Likewise.
|
||
* testsuite/gas/mips/micromips-branch-relax.s: Add `insn32'
|
||
conditionals.
|
||
* testsuite/gas/mips/micromips-branch-relax.l: Update line
|
||
numbers accordingly.
|
||
* testsuite/gas/mips/micromips-branch-relax-pic.l: Likewise.
|
||
* testsuite/gas/mips/micromips-branch-relax-insn32.d: New test.
|
||
* testsuite/gas/mips/micromips-branch-relax-insn32-pic.d: New
|
||
test.
|
||
* testsuite/gas/mips/micromips-branch-relax-insn32.l: New
|
||
stderr output.
|
||
* testsuite/gas/mips/micromips-branch-relax-insn32-pic.l: New
|
||
stderr output.
|
||
* testsuite/gas/mips/mips.exp: Run the new tests.
|
||
|
||
2016-07-21 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
* configure: Regenerated.
|
||
|
||
2016-07-20 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* testsuite/gas/arc/dsp.d: New file.
|
||
* testsuite/gas/arc/dsp.s: Likewise.
|
||
* testsuite/gas/arc/fpu.d: Likewise.
|
||
* testsuite/gas/arc/fpu.s: Likewise.
|
||
* testsuite/gas/arc/ext2op.d: Add specific disassembler option.
|
||
* testsuite/gas/arc/ext3op.d: Likewise.
|
||
* testsuite/gas/arc/tdpfp.d: Likewise.
|
||
* testsuite/gas/arc/tfpuda.d: Likewise.
|
||
|
||
2016-07-20 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (mips_force_relocation): Remove
|
||
R_MIPS_PC26_S2 and R_MIPS_PC21_S2.
|
||
|
||
2016-07-19 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (mips_force_relocation, mips_fix_adjustable):
|
||
Adjust comments for BAL to JALX linker conversion.
|
||
(fix_bad_cross_mode_branch_p): Accept cross-mode BAL.
|
||
* testsuite/gas/mips/unaligned-branch-1.l: Update error messages
|
||
expected.
|
||
* testsuite/gas/mips/unaligned-branch-micromips-1.l: Likewise.
|
||
* testsuite/gas/mips/branch-local-4.d: New test.
|
||
* testsuite/gas/mips/branch-local-n32-4.d: New test.
|
||
* testsuite/gas/mips/branch-local-n64-4.d: New test.
|
||
* testsuite/gas/mips/branch-addend.d: New test.
|
||
* testsuite/gas/mips/branch-addend-n32.d: New test.
|
||
* testsuite/gas/mips/branch-addend-n64.d: New test.
|
||
* testsuite/gas/mips/branch-local-4.s: New test source.
|
||
* testsuite/gas/mips/branch-addend.s: New test source.
|
||
* testsuite/gas/mips/mips.exp: Run the new tests.
|
||
|
||
2016-07-19 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (mips_force_relocation): Also retain branch
|
||
relocations against MIPS16 and microMIPS symbols.
|
||
(fix_bad_cross_mode_jump_p): New function.
|
||
(fix_bad_same_mode_jalx_p): Likewise.
|
||
(fix_bad_misaligned_jump_p): Likewise.
|
||
(fix_bad_cross_mode_branch_p): Likewise.
|
||
(fix_bad_misaligned_branch_p): Likewise.
|
||
(fix_validate_branch): Likewise.
|
||
(md_apply_fix) <BFD_RELOC_MIPS_JMP, BFD_RELOC_MIPS16_JMP>
|
||
<BFD_RELOC_MICROMIPS_JMP>: Separate from BFD_RELOC_MIPS_SHIFT5,
|
||
etc. Verify the ISA mode and alignment of the jump target.
|
||
<BFD_RELOC_MIPS_21_PCREL_S2>: Replace the inline alignment check
|
||
with a call to `fix_validate_branch'.
|
||
<BFD_RELOC_MIPS_26_PCREL_S2>: Likewise.
|
||
<BFD_RELOC_16_PCREL_S2>: Likewise.
|
||
<BFD_RELOC_MICROMIPS_7_PCREL_S1, BFD_RELOC_MICROMIPS_10_PCREL_S1>
|
||
<BFD_RELOC_MICROMIPS_16_PCREL_S1>: Retain the original addend.
|
||
Verify the ISA mode and alignment of the branch target.
|
||
(md_convert_frag): Verify the ISA mode and alignment of resolved
|
||
MIPS16 branch targets.
|
||
* testsuite/gas/mips/branch-misc-1.s: Annotate non-instruction
|
||
branch targets with `.insn'.
|
||
* testsuite/gas/mips/branch-misc-5.s: Likewise.
|
||
* testsuite/gas/mips/micromips@branch-misc-5-64.d: Update
|
||
accordingly.
|
||
* testsuite/gas/mips/micromips@branch-misc-5pic-64.d: Likewise.
|
||
* testsuite/gas/mips/micromips-branch-relax.s: Annotate
|
||
non-instruction branch target with `.insn'.
|
||
* testsuite/gas/mips/micromips.s: Replace microMIPS JALX targets
|
||
with external symbols.
|
||
* testsuite/gas/mips/micromips-insn32.d: Update accordingly.
|
||
* testsuite/gas/mips/micromips-noinsn32.d: Likewise.
|
||
* testsuite/gas/mips/micromips-trap.d: Likewise.
|
||
* testsuite/gas/mips/micromips.d: Likewise.
|
||
* testsuite/gas/mips/mips16.s: Annotate non-instruction branch
|
||
targets with `.insn'.
|
||
* testsuite/gas/mips/mips16.d: Update accordingly.
|
||
* testsuite/gas/mips/mips16-64.d: Likewise.
|
||
* testsuite/gas/mips/mips16-dwarf2.s: Annotate non-instruction
|
||
branch target with `.insn'.
|
||
* testsuite/gas/mips/relax-swap3.s: Likewise.
|
||
* testsuite/gas/mips/branch-local-2.l: New list test.
|
||
* testsuite/gas/mips/branch-local-3.l: New list test.
|
||
* testsuite/gas/mips/branch-local-n32-2.l: New list test.
|
||
* testsuite/gas/mips/branch-local-n32-3.l: New list test.
|
||
* testsuite/gas/mips/branch-local-n64-2.l: New list test.
|
||
* testsuite/gas/mips/branch-local-n64-3.l: New list test.
|
||
* testsuite/gas/mips/unaligned-jump-1.l: New list test.
|
||
* testsuite/gas/mips/unaligned-jump-2.l: New list test.
|
||
* testsuite/gas/mips/unaligned-jump-3.d: New test.
|
||
* testsuite/gas/mips/unaligned-jump-mips16-1.l: New list test.
|
||
* testsuite/gas/mips/unaligned-jump-mips16-2.l: New list test.
|
||
* testsuite/gas/mips/unaligned-jump-mips16-3.d: New test.
|
||
* testsuite/gas/mips/unaligned-jump-micromips-1.l: New list
|
||
test.
|
||
* testsuite/gas/mips/unaligned-jump-micromips-2.l: New list
|
||
test.
|
||
* testsuite/gas/mips/unaligned-jump-micromips-3.d: New test.
|
||
* testsuite/gas/mips/unaligned-branch-1.l: New list test.
|
||
* testsuite/gas/mips/unaligned-branch-2.l: New list test.
|
||
* testsuite/gas/mips/unaligned-branch-3.d: New test.
|
||
* testsuite/gas/mips/unaligned-branch-r6-1.l: New list test.
|
||
* testsuite/gas/mips/unaligned-branch-r6-2.l: New list test.
|
||
* testsuite/gas/mips/unaligned-branch-r6-3.l: New list test.
|
||
* testsuite/gas/mips/unaligned-branch-r6-4.l: New list test.
|
||
* testsuite/gas/mips/unaligned-branch-r6-5.d: New test.
|
||
* testsuite/gas/mips/unaligned-branch-r6-6.d: New test.
|
||
* testsuite/gas/mips/unaligned-branch-mips16-1.l: New list test.
|
||
* testsuite/gas/mips/unaligned-branch-mips16-2.l: New list test.
|
||
* testsuite/gas/mips/unaligned-branch-mips16-3.d: New test.
|
||
* testsuite/gas/mips/unaligned-branch-micromips-1.l: New list
|
||
test.
|
||
* testsuite/gas/mips/unaligned-branch-micromips-2.l: New list
|
||
test.
|
||
* testsuite/gas/mips/unaligned-branch-micromips-3.d: New test.
|
||
* testsuite/gas/mips/branch-local-2.s: New test source.
|
||
* testsuite/gas/mips/branch-local-3.s: New test source.
|
||
* testsuite/gas/mips/branch-local-n32-2.s: New test source.
|
||
* testsuite/gas/mips/branch-local-n32-3.s: New test source.
|
||
* testsuite/gas/mips/branch-local-n64-2.s: New test source.
|
||
* testsuite/gas/mips/branch-local-n64-3.s: New test source.
|
||
* testsuite/gas/mips/unaligned-jump-1.s: New test source.
|
||
* testsuite/gas/mips/unaligned-jump-2.s: New test source.
|
||
* testsuite/gas/mips/unaligned-jump-mips16-1.s: New test source.
|
||
* testsuite/gas/mips/unaligned-jump-mips16-2.s: New test source.
|
||
* testsuite/gas/mips/unaligned-jump-micromips-1.s: New test
|
||
source.
|
||
* testsuite/gas/mips/unaligned-jump-micromips-2.s: New test
|
||
source.
|
||
* testsuite/gas/mips/unaligned-branch-1.s: New test source.
|
||
* testsuite/gas/mips/unaligned-branch-2.s: New test source.
|
||
* testsuite/gas/mips/unaligned-branch-r6-1.s: New test source.
|
||
* testsuite/gas/mips/unaligned-branch-r6-2.s: New test source.
|
||
* testsuite/gas/mips/unaligned-branch-r6-3.s: New test source.
|
||
* testsuite/gas/mips/unaligned-branch-r6-4.s: New test source.
|
||
* testsuite/gas/mips/unaligned-branch-mips16-1.s: New test
|
||
source.
|
||
* testsuite/gas/mips/unaligned-branch-mips16-2.s: New test
|
||
source.
|
||
* testsuite/gas/mips/unaligned-branch-micromips-1.s: New test
|
||
source.
|
||
* testsuite/gas/mips/unaligned-branch-micromips-2.s: New test
|
||
source.
|
||
* testsuite/gas/mips/mips.exp: Run the new tests.
|
||
|
||
2016-07-19 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-nds32.c (struct nds32_pseudo_opcode): Make pseudo_val
|
||
unsigned int.
|
||
(do_pseudo_b): Adjust.
|
||
(do_pseudo_bal): Likewise.
|
||
(do_pseudo_bge): Likewise.
|
||
(do_pseudo_bges): Likewise.
|
||
(do_pseudo_bgt): Likewise.
|
||
(do_pseudo_bgts): Likewise.
|
||
(do_pseudo_ble): Likewise.
|
||
(do_pseudo_bles): Likewise.
|
||
(do_pseudo_blt): Likewise.
|
||
(do_pseudo_blts): Likewise.
|
||
(do_pseudo_br): Likewise.
|
||
(do_pseudo_bral): Likewise.
|
||
(do_pseudo_la): Likewise.
|
||
(do_pseudo_li): Likewise.
|
||
(do_pseudo_ls_bhw): Likewise.
|
||
(do_pseudo_ls_bhwp): Likewise.
|
||
(do_pseudo_ls_bhwpc): Likewise.
|
||
(do_pseudo_ls_bhwi): Likewise.
|
||
(do_pseudo_move): Likewise.
|
||
(do_pseudo_neg): Likewise.
|
||
(do_pseudo_not): Likewise.
|
||
(do_pseudo_pushpopm): Likewise.
|
||
(do_pseudo_pushpop): Likewise.
|
||
(do_pseudo_v3push): Likewise.
|
||
(do_pseudo_v3pop): Likewise.
|
||
(do_pseudo_pushpop_stack): Likewise.
|
||
(do_pseudo_push_bhwd): Likewise.
|
||
(do_pseudo_pop_bhwd): Likewise.
|
||
(do_pseudo_pusha): Likewise.
|
||
(do_pseudo_pushi): Likewise.
|
||
|
||
2016-07-19 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-sparc.c (struct pop_entry): Make the type of reloc
|
||
bfd_reloc_code_real_type.
|
||
|
||
2016-07-19 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-sparc.c (pop_table): Remove sentinel.
|
||
(NUM_PERC_ENTRIES): Use ARRAY_SIZE on pop_table.
|
||
(md_begin): Adjust.
|
||
|
||
2016-07-19 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-z8k.c (newfix): Make type of type argument
|
||
bfd_reloc_code_real_type.
|
||
(apply_fix): Likewise.
|
||
|
||
2016-07-16 Alan Modra <amodra@gmail.com>
|
||
|
||
* config/tc-epiphany.c: Don't include libbfd.h.
|
||
* config/tc-frv.c: Likewise.
|
||
* config/tc-ip2k.c: Likewise.
|
||
* config/tc-iq2000.c: Likewise.
|
||
* config/tc-m32c.c: Likewise.
|
||
* config/tc-mep.c: Likewise.
|
||
* config/tc-mt.c: Likewise.
|
||
* config/tc-nios2.c: Likewise.
|
||
|
||
2016-07-16 Alan Modra <amodra@gmail.com>
|
||
|
||
* config/bfin-parse.y: Don't include libbfd.h.
|
||
* config/tc-bfin.c: Likewise.
|
||
* config/tc-rl78.c: Likewise.
|
||
* config/tc-rx.c: Likewise.
|
||
* config/tc-metag.c: Likewise.
|
||
(create_dspreg_htabs, create_scond_htab): Use gas_assert not BFD_ASSERT.
|
||
* Makefile.am: Update dependencies.
|
||
* Makefile.in: Regenerate.
|
||
|
||
2016-07-14 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.h (TC_FORCE_RELOCATION_ABS): New macro.
|
||
(mips_force_relocation_abs): New prototype.
|
||
* config/tc-mips.c (mips_force_relocation_abs): New function.
|
||
* testsuite/gas/mips/branch-absolute.d: Adjust dump patterns.
|
||
* testsuite/gas/mips/mips16-branch-absolute.d: Likewise.
|
||
* testsuite/gas/mips/micromips-branch-absolute-n32.d: Likewise.
|
||
* testsuite/gas/mips/micromips-branch-absolute-n64.d: Likewise.
|
||
* testsuite/gas/mips/micromips-branch-absolute-addend-n32.d:
|
||
Likewise.
|
||
* testsuite/gas/mips/micromips-branch-absolute-addend-n64.d:
|
||
Likewise.
|
||
* testsuite/gas/mips/branch-absolute-addend.d: New test.
|
||
* testsuite/gas/mips/mips16-branch-absolute-addend.d: New test.
|
||
* testsuite/gas/mips/micromips-branch-absolute-addend.d: New
|
||
test.
|
||
* testsuite/gas/mips/mips.exp: Run the new tests.
|
||
|
||
2016-07-14 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (md_apply_fix) <BFD_RELOC_MIPS16_16_PCREL_S1>
|
||
<BFD_RELOC_MICROMIPS_7_PCREL_S1, BFD_RELOC_MICROMIPS_10_PCREL_S1>
|
||
<BFD_RELOC_MICROMIPS_16_PCREL_S1>: Keep the ISA bit in the
|
||
addend calculated.
|
||
* testsuite/gas/mips/mips16-branch-absolute.s: Set the ISA bit
|
||
in `bar', export `foo'.
|
||
* testsuite/gas/mips/mips16-branch-absolute.d: Adjust
|
||
accordingly.
|
||
* testsuite/gas/mips/mips16-branch-absolute-n32.d: Likewise.
|
||
* testsuite/gas/mips/mips16-branch-absolute-n64.d: Likewise.
|
||
* testsuite/gas/mips/mips16-branch-absolute-addend-n32.d:
|
||
Likewise.
|
||
* testsuite/gas/mips/mips16-branch-absolute-addend-n64.d:
|
||
Likewise.
|
||
|
||
2016-07-14 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* testsuite/gas/mips/mips16-branch-absolute.d: Update patterns.
|
||
* testsuite/gas/mips/branch-absolute.d: New test.
|
||
* testsuite/gas/mips/branch-absolute-n32.d: New test.
|
||
* testsuite/gas/mips/branch-absolute-n64.d: New test.
|
||
* testsuite/gas/mips/branch-absolute-addend-n32.d: New test.
|
||
* testsuite/gas/mips/branch-absolute-addend-n64.d: New test.
|
||
* testsuite/gas/mips/mips16-branch-absolute-n32.d: New test.
|
||
* testsuite/gas/mips/mips16-branch-absolute-n64.d: New test.
|
||
* testsuite/gas/mips/mips16-branch-absolute-addend-n32.d: New
|
||
test.
|
||
* testsuite/gas/mips/mips16-branch-absolute-addend-n64.d: New
|
||
test.
|
||
* testsuite/gas/mips/micromips-branch-absolute.d: New test.
|
||
* testsuite/gas/mips/micromips-branch-absolute-n32.d: New test.
|
||
* testsuite/gas/mips/micromips-branch-absolute-n64.d: New test.
|
||
* testsuite/gas/mips/micromips-branch-absolute-addend-n32.d: New
|
||
test.
|
||
* testsuite/gas/mips/micromips-branch-absolute-addend-n64.d: New
|
||
test.
|
||
* testsuite/gas/mips/branch-absolute.s: New test source.
|
||
* testsuite/gas/mips/branch-absolute-addend.s: New test source.
|
||
* testsuite/gas/mips/mips16-branch-absolute-addend.s: New test
|
||
source.
|
||
* testsuite/gas/mips/micromips-branch-absolute.s: New test
|
||
source.
|
||
* testsuite/gas/mips/micromips-branch-absolute-addend.s: New
|
||
test source.
|
||
* testsuite/gas/mips/mips.exp: Run the new tests.
|
||
|
||
2016-07-13 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* testsuite/gas/mips/nal-1.d: New test.
|
||
* testsuite/gas/mips/mipsr6@nal-1.d: New test.
|
||
* testsuite/gas/mips/nal-2.d: New test.
|
||
* testsuite/gas/mips/mipsr6@nal-2.d: New test.
|
||
* testsuite/gas/mips/nal.s: New test source.
|
||
* testsuite/gas/mips/mips.exp: Run the new tests.
|
||
|
||
2016-07-12 Jose E. Marchesi <jose.marchesi@oracle.com>
|
||
|
||
* testsuite/gas/sparc/ldtxa.s: New file.
|
||
* testsuite/gas/sparc/ldtxa.d: Likewise.
|
||
* testsuite/gas/sparc/sparc.exp: Execute the ldtxa test.
|
||
|
||
2016-07-11 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* config/tc-arc.c (arc_reloc_op_tag): Allow complex ops for dtpoff.
|
||
(tc_gen_reloc): Remove passing DTPOFF base info into reloc addendum
|
||
as it is no longer needed.
|
||
|
||
2016-07-08 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (append_insn): Remove extraneous
|
||
`install_insn' call.
|
||
|
||
2016-07-04 Jan Beulich <jbeulich@suse.com>
|
||
|
||
* config/tc-i386.c (check_qword_reg): Correct register kind
|
||
checked.
|
||
* testsuite/gas/i386/x86-64-suffix-bad.s: Add q-suffix with
|
||
16-bit register cases.
|
||
* testsuite/gas/i386/x86-64-suffix-bad.l: Adjust expectations.
|
||
|
||
|
||
2016-07-02 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* testsuite/gas/mips/ecoff@ld.d: Remove test.
|
||
* testsuite/gas/mips/ecoff@ld-forward.d: Remove test.
|
||
* testsuite/gas/mips/ecoff@ld-zero-3.d: Remove test.
|
||
* testsuite/gas/mips/ecoff@sd.d: Remove test.
|
||
* testsuite/gas/mips/ecoff@sd-forward.d: Remove test.
|
||
* testsuite/gas/mips/beq.d: Remove a.out and ECOFF support from
|
||
reloc patterns.
|
||
* testsuite/gas/mips/mipsr6@beq.d: Likewise.
|
||
* testsuite/gas/mips/bge.d: Likewise.
|
||
* testsuite/gas/mips/mipsr6@bge.d: Likewise.
|
||
* testsuite/gas/mips/bgeu.d: Likewise.
|
||
* testsuite/gas/mips/mipsr6@bgeu.d: Likewise.
|
||
* testsuite/gas/mips/blt.d: Likewise.
|
||
* testsuite/gas/mips/mipsr6@blt.d: Likewise.
|
||
* testsuite/gas/mips/bltu.d: Likewise.
|
||
* testsuite/gas/mips/mipsr6@bltu.d: Likewise.
|
||
* testsuite/gas/mips/branch-likely.d: Likewise.
|
||
* testsuite/gas/mips/la.d: Likewise.
|
||
* testsuite/gas/mips/lb.d: Likewise.
|
||
* testsuite/gas/mips/lifloat.d: Likewise.
|
||
* testsuite/gas/mips/sb.d: Likewise.
|
||
* testsuite/gas/mips/uld.d: Likewise.
|
||
* testsuite/gas/mips/ulh.d: Likewise.
|
||
* testsuite/gas/mips/ulw.d: Likewise.
|
||
* testsuite/gas/mips/usd.d: Likewise.
|
||
* testsuite/gas/mips/ush.d: Likewise.
|
||
* testsuite/gas/mips/usw.d: Likewise.
|
||
|
||
2016-07-02 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* testsuite/gas/mips/branch-misc-2.s: Move non
|
||
locally-defined-global symbol tests...
|
||
* testsuite/gas/mips/branch-misc-5.s: ... to this new test.
|
||
* testsuite/gas/mips/branch-misc-2.d: Update accordingly.
|
||
* testsuite/gas/mips/branch-misc-2-64.d: Likewise.
|
||
* testsuite/gas/mips/branch-misc-2pic.d: Likewise.
|
||
* testsuite/gas/mips/branch-misc-2pic-64.d: Likewise.
|
||
* testsuite/gas/mips/mipsr6@branch-misc-2-64.d: Likewise.
|
||
* testsuite/gas/mips/mipsr6@branch-misc-2pic-64.d: Likewise.
|
||
* testsuite/gas/mips/micromips@branch-misc-2.d: Likewise.
|
||
* testsuite/gas/mips/micromips@branch-misc-2-64.d: Likewise.
|
||
* testsuite/gas/mips/micromips@branch-misc-2pic.d: Likewise.
|
||
* testsuite/gas/mips/micromips@branch-misc-2pic-64.d: Likewise.
|
||
* testsuite/gas/mips/branch-misc-5.d: New test.
|
||
* testsuite/gas/mips/branch-misc-5pic.d: New test.
|
||
* testsuite/gas/mips/branch-misc-5-64.d: New test.
|
||
* testsuite/gas/mips/branch-misc-5pic-64.d: New test.
|
||
* testsuite/gas/mips/mipsr6@branch-misc-5-64.d: New test.
|
||
* testsuite/gas/mips/mipsr6@branch-misc-5pic-64.d: New test.
|
||
* testsuite/gas/mips/micromips@branch-misc-5.d: New test.
|
||
* testsuite/gas/mips/micromips@branch-misc-5pic.d: New test.
|
||
* testsuite/gas/mips/micromips@branch-misc-5-64.d: New test.
|
||
* testsuite/gas/mips/micromips@branch-misc-5pic-64.d: New test.
|
||
* testsuite/gas/mips/mips.exp: Run the new tests.
|
||
|
||
2016-07-02 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* testsuite/gas/mips/beq.s: Uncomment branches to undefined
|
||
symbols.
|
||
* testsuite/gas/mips/beq.d: Update accordingly.
|
||
* testsuite/gas/mips/mipsr6@beq.d: Likewise.
|
||
* testsuite/gas/mips/micromips@beq.d: Likewise.
|
||
|
||
2016-07-02 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* testsuite/gas/mips/mips.exp: Restrict 64-bit `branch-mips'
|
||
tests to NewABI targets.
|
||
|
||
2016-07-02 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* testsuite/gas/mips/mips.exp: Group `branch-misc' tests
|
||
together.
|
||
|
||
2016-07-01 Szabolcs Nagy <szabolcs.nagy@arm.com>
|
||
|
||
* config/tc-aarch64.c (struct aarch64_option_cpu_value_table): Add
|
||
require field.
|
||
(aarch64_features): Initialize require fields.
|
||
(aarch64_parse_features): Handle dependencies.
|
||
(aarch64_feature_enable_set, aarch64_feature_disable_set): New.
|
||
(md_assemble): Use AARCH64_CPU_HAS_ALL_FEATURES.
|
||
* testsuite/gas/aarch64/illegal-nofp16.s: New.
|
||
* testsuite/gas/aarch64/illegal-nofp16.l: New.
|
||
* testsuite/gas/aarch64/illegal-nofp16.d: New.
|
||
|
||
2016-07-01 Nick Clifton <nickc@redhat.com>
|
||
|
||
* macro.c (macro_expand_body): Use a buffer big enough to hold an
|
||
extremely large integer.
|
||
|
||
2016-07-01 Jan Beulich <jbeulich@suse.com>
|
||
|
||
* testsuite/gas/i386/mpx-inval-2.l: Relax for COFF targets.
|
||
|
||
2016-07-01 Tristan Gingold <gingold@adacore.com>
|
||
|
||
* NEWS: Add marker for 2.27.
|
||
|
||
2016-07-01 Jan Beulich <jbeulich@suse.com>
|
||
|
||
* tc-i386.c (i386_index_check): Add special checks for bndmk,
|
||
bndldx, and bndstx.
|
||
* testsuite/gas/i386/mpx-inval-2.s: Add %rip and %eip relative
|
||
as well as scaling by other than 1 tests.
|
||
* testsuite/gas/i386/mpx-inval-2.l: Adjust accordingly.
|
||
|
||
2016-07-01 Jan Beulich <jbeulich@suse.com>
|
||
|
||
* tc-i386.c (md_assemble): Alter address size checking for MPX
|
||
instructions.
|
||
* testsuite/gas/i386/mpx-inval-2.s: New.
|
||
* testsuite/gas/i386/mpx-inval-2.l: New.
|
||
* testsuite/gas/i386/i386.exp: Run new test.
|
||
|
||
2016-07-01 Jan Beulich <jbeulich@suse.com>
|
||
|
||
PR gas/20318
|
||
* config/tc-i386.c (match_template): Add char parameter,
|
||
consumed in Intel mode for an extra suffix check.
|
||
(md_assemble): New local variable mnem_suffix.
|
||
* testsuite/gas/i386/suffix-bad.s: New.
|
||
* testsuite/gas/i386/suffix-bad.l: New.
|
||
* testsuite/gas/i386/i386.exp: Run new test (twice).
|
||
|
||
2016-07-01 Jan Beulich <jbeulich@suse.com>
|
||
|
||
* testsuite/gas/i386/movz.s: New.
|
||
* testsuite/gas/i386/movz32.d: New.
|
||
* testsuite/gas/i386/movz64.d: New.
|
||
* testsuite/gas/i386/i386.exp: Run new tests.
|
||
|
||
2016-07-01 Jan Beulich <jbeulich@suse.com>
|
||
|
||
* config/tc-i386.c (struct _i386_insn): New field memop1_string.
|
||
(md_assemble): Free first memory operand string.
|
||
(i386_index_check): Use repprefixok to distingush xlat from
|
||
other (real) string ops.
|
||
(maybe_adjust_templates): New.
|
||
(i386_att_operand). Call it. Store first memory operand string.
|
||
* config/tc-i386-intel.c (i386_intel_operand): Likewise.
|
||
* testsuite/gas/i386/intel-movs.s: New.
|
||
* testsuite/gas/i386/intel-movs32.d: New.
|
||
* testsuite/gas/i386/intel-movs64.d: New.
|
||
* testsuite/gas/i386/i386.exp: Run new tests. Invoke as for
|
||
64-bits tests with "--defsym x86_64=1 --strip-local-absolute".
|
||
|
||
2016-06-30 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (get_append_method): Fix a comment typo.
|
||
|
||
2016-06-30 Matthew Fortune <Matthew.Fortune@imgtec.com>
|
||
Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (append_insn) <APPEND_SWAP>: Do not special
|
||
case MIPS16 handling.
|
||
* testsuite/gas/mips/branch-swap-3.d: New test.
|
||
* testsuite/gas/mips/branch-swap-4.d: New test.
|
||
* testsuite/gas/mips/mips16@branch-swap-3.d: New test.
|
||
* testsuite/gas/mips/mips16@branch-swap-4.d: New test.
|
||
* testsuite/gas/mips/micromips@branch-swap-3.d: New test.
|
||
* testsuite/gas/mips/micromips@branch-swap-4.d: New test.
|
||
* testsuite/gas/mips/branch-swap-3.s: New test source.
|
||
* testsuite/gas/mips/mips.exp: Run the new tests.
|
||
|
||
2016-06-30 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (append_insn): Simplify non-MIPS16 branch
|
||
swapping sequence.
|
||
|
||
2016-06-30 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
PR gas/20312
|
||
* write.c (subsegs_finish_section): Force no section padding to
|
||
alignment on failed assembly, always set last frag's alignment
|
||
from section.
|
||
* testsuite/gas/all/pr20312.l: New list test.
|
||
* testsuite/gas/all/pr20312.s: New test source.
|
||
* testsuite/gas/all/gas.exp: Run the new test
|
||
|
||
2016-06-30 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config.in (TARGET_WITH_CPU): Undefine.
|
||
* configure.ac: Add --with-cpu support, and define in config.h.
|
||
* configure: Regenerate.
|
||
* config/tc-arc.c: Use TARGET_WITH_CPU to select default CPU.
|
||
* NEWS: Mention new configure option.
|
||
|
||
2016-06-30 Matthew Wahab <matthew.wahab@arm.com>
|
||
|
||
* testsuite/gas/arm/armv8_2+rdma.d: New.
|
||
|
||
2016-06-29 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
* NEWS: Mention --enable-compressed-debug-sections=gas is the
|
||
default for Linux/x86 targets.
|
||
* configure.tgt (ac_default_compressed_debug_sections): Default
|
||
to yes for Linux/x86 targets.
|
||
|
||
2016-06-29 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* write.c: Remove "libbfd.h" inclusion.
|
||
|
||
2016-06-28 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* testsuite/gas/elf/elf.exp: Use `supports_gnu_unique' with the
|
||
`type' test.
|
||
|
||
2016-06-28 Alan Modra <amodra@gmail.com>
|
||
|
||
PR gas/20247
|
||
* testsuite/gas/elf/section11.s: Don't start directives in first column.
|
||
|
||
2016-06-28 Richard Sandiford <richard.sandiford@arm.com>
|
||
|
||
* testsuite/gas/aarch64/diagnostic.s,
|
||
testsuite/gas/aarch64/diagnostic.l: Add tests for out-of-range indices.
|
||
|
||
2016-06-28 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (mips16_reloc_p): Handle
|
||
BFD_RELOC_MIPS16_16_PCREL_S1.
|
||
(b_reloc_p): Likewise.
|
||
(limited_pcrel_reloc_p): Likewise.
|
||
(md_pcrel_from): Likewise.
|
||
(md_apply_fix): Likewise.
|
||
(tc_gen_reloc): Likewise.
|
||
(md_convert_frag): Likewise.
|
||
(mips_fix_adjustable): Update comment.
|
||
* testsuite/gas/mips/mips16-branch-reloc-2.d: Remove error
|
||
output, add dump patterns.
|
||
* testsuite/gas/mips/mips16-branch-reloc-3.d: Remove error
|
||
output, add dump patterns.
|
||
* testsuite/gas/mips/mips16-branch-addend-2.d: Remove error
|
||
output, add dump patterns.
|
||
* testsuite/gas/mips/mips16-branch-addend-3.d: Remove error
|
||
output, add dump patterns.
|
||
* testsuite/gas/mips/mips16-branch-absolute.d: Remove error
|
||
output, add dump patterns.
|
||
* testsuite/gas/mips/mips16-branch-reloc-2.l: Remove file.
|
||
* testsuite/gas/mips/mips16-branch-reloc-3.l: Remove file.
|
||
* testsuite/gas/mips/mips16-branch-addend-2.l: Remove file.
|
||
* testsuite/gas/mips/mips16-branch-addend-3.l: Remove file.
|
||
* testsuite/gas/mips/mips16-branch-absolute.l: Remove file.
|
||
* testsuite/gas/mips/mips16-branch-addend-2.s: Add padding.
|
||
* testsuite/gas/mips/branch-weak.s: Adjust alignment, avoid
|
||
implicit instruction padding, avoid MIPS16 JR->JRC conversion.
|
||
* testsuite/gas/mips/branch-weak-6.d: New test.
|
||
* testsuite/gas/mips/branch-weak-7.d: New test.
|
||
* testsuite/gas/mips/mips.exp: Run the new tests.
|
||
|
||
2016-06-27 Vineet Gupta <vgupta@synopsys.com>
|
||
|
||
* config//tc-arc.c (tc_arc_frame_initial_instructions): Use
|
||
cfi_add_CFA_def_cfa to generate default CFA with offset
|
||
* testsuite/gas/cfi/cfi-arc-1.d: Update expected output.
|
||
|
||
2016-06-27 Nick Clifton <nickc@redhat.com>
|
||
|
||
PR gas/20247
|
||
* as.h (do_not_pad_sections_to_alignment): New global variable.
|
||
* as.c (show_usage): Add --no-pad-sections.
|
||
(parse_args): Likewise.
|
||
* write.c (size_seg): Skip padding the end of the section if
|
||
requested from the command line.
|
||
(SUB_SEGMENT_ALIGN): Likewise.
|
||
* doc/as.texinfo: Document the new option.
|
||
* NEWS: Mention the new feature.
|
||
* testsuite/gas/elf/section11.s: New test.
|
||
* testsuite/gas/elf/section11.d: New test driver.
|
||
* testsuite/gas/elf/elf.exp: Run the new test.
|
||
|
||
2016-06-27 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-dlx.c: Include bfd/elf32-dlx.h.
|
||
* config/tc-dlx.h: Remove prototype of dlx_set_skip_hi16.
|
||
|
||
2016-06-27 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-xtensa.c (xtensa_elf_suffix): Use ARRAY_SIZE instead of a
|
||
sentinal element.
|
||
(map_suffix_reloc_to_operator): Likewise.
|
||
(map_operator_to_reloc): Likewise.
|
||
|
||
2016-06-27 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-nds32.c (md_begin): Use ARRAY_SIZE instead of a sentinal
|
||
element in relax_table.
|
||
|
||
2016-06-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-aarch64.c: Make the type of reg_entry::type
|
||
aarch_reg_type.
|
||
|
||
2016-06-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-bfin.c (bfin_cpus): Remove sentinal.
|
||
(md_parse_option): Adjust.
|
||
* config/tc-aarch64.c (aarch64_parse_abi): Replace use of a sentinal
|
||
with iteration from 0 to ARRAY_SIZE.
|
||
* config/tc-mcore.c (md_begin): Likewise.
|
||
* config/tc-visium.c (visium_parse_arch): Likewise.
|
||
|
||
2016-06-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-tic54x.c (tic54x_set_default_include): remove argument
|
||
and simplify accordingly.
|
||
(tic54x_include): Adjust.
|
||
(tic54x_mlib): Likewise.
|
||
|
||
2016-06-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-xtensa.c (xtensa_make_property_section): Remove prototype.
|
||
|
||
2016-06-24 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (append_insn): Use any `O_symbol' expression
|
||
unchanged with relaxed MIPS16 instructions.
|
||
(mips16_extended_frag): Adjust accordingly. Return 1 right
|
||
away if a relocation will be required for the symbol requested.
|
||
Remove dead first relaxation pass code.
|
||
(mips_relax_frag): Pass `sec' down to `mips16_extended_frag'.
|
||
(md_convert_frag): Adjust symbol value calculation. Raise an
|
||
error if a relocation is required for the symbol requested.
|
||
* testsuite/gas/mips/mips16@relax-swap3.d: Remove dump patterns,
|
||
add error output.
|
||
* testsuite/gas/mips/mips16@relax-swap3.l: New error output.
|
||
* testsuite/gas/mips/mips16-pcrel-relax-0.d: New test.
|
||
* testsuite/gas/mips/mips16-pcrel-relax-1.d: New test.
|
||
* testsuite/gas/mips/mips16-pcrel-relax-2.d: New test.
|
||
* testsuite/gas/mips/mips16-pcrel-relax-3.d: New test.
|
||
* testsuite/gas/mips/mips16-pcrel-reloc-0.d: New test.
|
||
* testsuite/gas/mips/mips16-pcrel-reloc-1.d: New test.
|
||
* testsuite/gas/mips/mips16-pcrel-reloc-2.d: New test.
|
||
* testsuite/gas/mips/mips16-pcrel-reloc-3.d: New test.
|
||
* testsuite/gas/mips/mips16-pcrel-reloc-4.d: New test.
|
||
* testsuite/gas/mips/mips16-pcrel-reloc-5.d: New test.
|
||
* testsuite/gas/mips/mips16-pcrel-reloc-6.d: New test.
|
||
* testsuite/gas/mips/mips16-pcrel-reloc-7.d: New test.
|
||
* testsuite/gas/mips/mips16-pcrel-addend-0.d: New test.
|
||
* testsuite/gas/mips/mips16-pcrel-addend-1.d: New test.
|
||
* testsuite/gas/mips/mips16-pcrel-addend-2.d: New test.
|
||
* testsuite/gas/mips/mips16-pcrel-addend-3.d: New test.
|
||
* testsuite/gas/mips/mips16-pcrel-absolute.d: New test.
|
||
* testsuite/gas/mips/mips16-branch-reloc-0.d: New test.
|
||
* testsuite/gas/mips/mips16-branch-reloc-1.d: New test.
|
||
* testsuite/gas/mips/mips16-branch-reloc-2.d: New test.
|
||
* testsuite/gas/mips/mips16-branch-reloc-3.d: New test.
|
||
* testsuite/gas/mips/mips16-branch-addend-0.d: New test.
|
||
* testsuite/gas/mips/mips16-branch-addend-1.d: New test.
|
||
* testsuite/gas/mips/mips16-branch-addend-2.d: New test.
|
||
* testsuite/gas/mips/mips16-branch-addend-3.d: New test.
|
||
* testsuite/gas/mips/mips16-branch-absolute.d: New test.
|
||
* testsuite/gas/mips/mips16-absolute-reloc-0.d: New test.
|
||
* testsuite/gas/mips/mips16-absolute-reloc-1.d: New test.
|
||
* testsuite/gas/mips/mips16-absolute-reloc-2.d: New test.
|
||
* testsuite/gas/mips/mips16-absolute-reloc-3.d: New test.
|
||
* testsuite/gas/mips/mips16-pcrel-reloc-2.l: New error output.
|
||
* testsuite/gas/mips/mips16-pcrel-reloc-3.l: New error output.
|
||
* testsuite/gas/mips/mips16-pcrel-reloc-6.l: New error output.
|
||
* testsuite/gas/mips/mips16-pcrel-reloc-7.l: New error output.
|
||
* testsuite/gas/mips/mips16-pcrel-addend-2.l: New error output.
|
||
* testsuite/gas/mips/mips16-pcrel-addend-3.l: New error output.
|
||
* testsuite/gas/mips/mips16-pcrel-absolute.l: New error output.
|
||
* testsuite/gas/mips/mips16-branch-reloc-2.l: New error output.
|
||
* testsuite/gas/mips/mips16-branch-reloc-3.l: New error output.
|
||
* testsuite/gas/mips/mips16-branch-addend-2.l: New error output.
|
||
* testsuite/gas/mips/mips16-branch-addend-3.l: New error output.
|
||
* testsuite/gas/mips/mips16-branch-absolute.l: New error output.
|
||
* testsuite/gas/mips/mips16-absolute-reloc-2.l: New error output.
|
||
* testsuite/gas/mips/mips16-absolute-reloc-3.l: New error output.
|
||
* testsuite/gas/mips/mips16-pcrel-relax-0.s: New test source.
|
||
* testsuite/gas/mips/mips16-pcrel-relax-2.s: New test source.
|
||
* testsuite/gas/mips/mips16-pcrel-reloc-0.s: New test source.
|
||
* testsuite/gas/mips/mips16-pcrel-reloc-1.s: New test source.
|
||
* testsuite/gas/mips/mips16-pcrel-reloc-2.s: New test source.
|
||
* testsuite/gas/mips/mips16-pcrel-reloc-3.s: New test source.
|
||
* testsuite/gas/mips/mips16-pcrel-reloc-4.s: New test source.
|
||
* testsuite/gas/mips/mips16-pcrel-reloc-5.s: New test source.
|
||
* testsuite/gas/mips/mips16-pcrel-reloc-6.s: New test source.
|
||
* testsuite/gas/mips/mips16-pcrel-reloc-7.s: New test source.
|
||
* testsuite/gas/mips/mips16-pcrel-addend-0.s: New test source.
|
||
* testsuite/gas/mips/mips16-pcrel-addend-1.s: New test source.
|
||
* testsuite/gas/mips/mips16-pcrel-addend-2.s: New test source.
|
||
* testsuite/gas/mips/mips16-pcrel-addend-3.s: New test source.
|
||
* testsuite/gas/mips/mips16-pcrel-absolute.s: New test source.
|
||
* testsuite/gas/mips/mips16-branch-reloc-0.s: New test source.
|
||
* testsuite/gas/mips/mips16-branch-reloc-1.s: New test source.
|
||
* testsuite/gas/mips/mips16-branch-reloc-2.s: New test source.
|
||
* testsuite/gas/mips/mips16-branch-reloc-3.s: New test source.
|
||
* testsuite/gas/mips/mips16-branch-addend-0.s: New test source.
|
||
* testsuite/gas/mips/mips16-branch-addend-1.s: New test source.
|
||
* testsuite/gas/mips/mips16-branch-addend-2.s: New test source.
|
||
* testsuite/gas/mips/mips16-branch-addend-3.s: New test source.
|
||
* testsuite/gas/mips/mips16-branch-absolute.s: New test source.
|
||
* testsuite/gas/mips/mips16-absolute-reloc-0.s: New test source.
|
||
* testsuite/gas/mips/mips16-absolute-reloc-1.s: New test source.
|
||
* testsuite/gas/mips/mips16-absolute-reloc-2.s: New test source.
|
||
* testsuite/gas/mips/mips16-absolute-reloc-3.s: New test source.
|
||
* testsuite/gas/mips/mips.exp: Run the new tests.
|
||
|
||
2016-06-24 Alan Modra <amodra@gmail.com>
|
||
|
||
* configure.tgt (alpha-*-openbsd*): Use em=nbsd.
|
||
|
||
2016-06-23 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (b_reloc_p): New function.
|
||
(mips_fix_adjustable): Also keep the original microMIPS symbol
|
||
referred from branch relocations.
|
||
* testsuite/gas/mips/branch-local-1.d: New test.
|
||
* testsuite/gas/mips/branch-local-n32-1.d: New test.
|
||
* testsuite/gas/mips/branch-local-n64-1.d: New test.
|
||
* testsuite/gas/mips/micromips@branch-misc-4-64.d: Update
|
||
relocations.
|
||
* testsuite/gas/mips/branch-local-1.s: New test source.
|
||
* testsuite/gas/mips/mips.exp: Run the new cases.
|
||
|
||
2016-06-23 Graham Markall <graham.markall@embecosm.com>
|
||
|
||
* config/tc-arc.c (options, md_longopts, md_parse_option): Move
|
||
-mspfp, -mdpfp and -mfpuda out of the sections for dummy
|
||
options. Correct erroneous enabling of SPFP instructions when
|
||
using -mnps400.
|
||
|
||
2016-06-22 Peter Bergner <bergner@vnet.ibm.com>
|
||
|
||
* testsuite/gas/ppc/power9.d <brd, brh, brw, mffs, mffs., mffsce,
|
||
mffscdrn, mffscdrni, mffscrn, mffscrni, mffsl, nandxor, rldixor,
|
||
setbool, xor3>: New tests.
|
||
* testsuite/gas/ppc/power9.s: Likewise.
|
||
|
||
2016-06-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-xtensa.c: Include elf/xtensa.h.
|
||
|
||
2016-06-21 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (calculate_reloc) <BFD_RELOC_HI16_S_PCREL>
|
||
<BFD_RELOC_LO16_PCREL>: New switch cases.
|
||
(md_apply_fix) <BFD_RELOC_HI16_S_PCREL, BFD_RELOC_LO16_PCREL>:
|
||
Move switch cases along `BFD_RELOC_MIPS_JMP'.
|
||
<BFD_RELOC_MIPS_21_PCREL_S2, BFD_RELOC_MIPS_26_PCREL_S2>
|
||
<BFD_RELOC_MIPS_18_PCREL_S3, BFD_RELOC_MIPS_19_PCREL_S2>: Handle
|
||
the resolved case.
|
||
* testsuite/gas/mips/pcrel-reloc-4.d: New test.
|
||
* testsuite/gas/mips/pcrel-reloc-4-r6.d: New test.
|
||
* testsuite/gas/mips/pcrel-reloc-5.d: New test.
|
||
* testsuite/gas/mips/pcrel-reloc-5-r6.d: New test.
|
||
* testsuite/gas/mips/pcrel-reloc-6.d: New test.
|
||
* testsuite/gas/mips/pcrel-reloc-6.l: New list test.
|
||
* testsuite/gas/mips/pcrel-reloc-4.s: New test source.
|
||
* testsuite/gas/mips/pcrel-reloc-6.s: New test source.
|
||
* testsuite/gas/mips/mips.exp: Run the new tests.
|
||
|
||
2016-06-21 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (md_apply_fix) <BFD_RELOC_MIPS_18_PCREL_S3>
|
||
<BFD_RELOC_MIPS_19_PCREL_S2>: Avoid null pointer dereferences
|
||
via `fixP->fx_addsy'.
|
||
|
||
2016-06-21 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (md_pcrel_from) <BFD_RELOC_MIPS_18_PCREL_S3>:
|
||
Calculate relocation from the containing aligned doubleword.
|
||
(tc_gen_reloc) <BFD_RELOC_MIPS_18_PCREL_S3>: Calculate the
|
||
addend from the containing aligned doubleword.
|
||
|
||
2016-06-21 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (mips_force_relocation): Use `file_mips_opts'
|
||
rather than `mips_opts' for the R6 ISA check.
|
||
(mips_fix_adjustable): Likewise.
|
||
* testsuite/gas/mips/pcrel-reloc-1.d: New test.
|
||
* testsuite/gas/mips/pcrel-reloc-1-r6.d: New test.
|
||
* testsuite/gas/mips/pcrel-reloc-2.d: New test.
|
||
* testsuite/gas/mips/pcrel-reloc-2-r6.d: New test.
|
||
* testsuite/gas/mips/pcrel-reloc-3.d: New test.
|
||
* testsuite/gas/mips/pcrel-reloc-3-r6.d: New test.
|
||
* testsuite/gas/mips/pcrel-reloc-1.s: New test source.
|
||
* testsuite/gas/mips/mips.exp: Run the new tests.
|
||
|
||
2016-06-21 Graham Markall <graham.markall@embecosm.com>
|
||
|
||
* config/tc-arc.c (check_cpu_feature, md_parse_option):
|
||
Add nps400 option and feature. Add check for nps400
|
||
feature. Refactor existing checks to check subclass before
|
||
feature enablement.
|
||
(md_show_usage): Document flags for NPS-400 and add some other
|
||
undocumented flags.
|
||
(cpu_type): Remove nps400 CPU type entry
|
||
(check_zol): Remove bfd_mach_arc_nps400 case.
|
||
(md_show_usage): Add help on -mcpu=nps400.
|
||
(cpu_types): Add entry for nps400 as arc700 plus nps400 extension
|
||
set.
|
||
* doc/c-arc.texi: Document the -mnps400, -mspfp, -mdpfp, and
|
||
-fpuda flags. Document -mcpu=nps400.
|
||
* testsuite/gas/arc/nps-400-0.d: Use -mcpu=arc700 -mnps400. Change
|
||
expected flags to match ARC700 instead of NPS400.
|
||
* testsuite/gas/arc/nps-400-1.d: Use -mcpu=arc700 -mnps400.
|
||
* testsuite/gas/arc/nps-400-2.d: Likewise.
|
||
* testsuite/gas/arc/nps-400-3.d: Likewise.
|
||
* testsuite/gas/arc/nps-400-4.d: Likewise.
|
||
* testsuite/gas/arc/nps-400-5.d: Likewise.
|
||
* testsuite/gas/arc/nps-400-6.d: Likewise.
|
||
* testsuite/gas/arc/nps-400-7.d: Likewise.
|
||
* testsuite/gas/arc/textinsn2op01.s: Change opcode of myinsn to
|
||
avoid clash with cbba instruction.
|
||
* testsuite/gas/arc/textinsn2op01.d: Likewise.
|
||
* testsuite/gas/arc/textinsn3op.d: Likewise.
|
||
* testsuite/gas/arc/textinsn3op.s: Likewise.
|
||
* testsuite/gas/arc/nps-400-0.d: Test using NPS-400 using
|
||
-mcpu=nps400 as an alternative to -mcpu=arc700 -mnps400 flags.
|
||
|
||
2016-06-20 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* testsuite/gas/mips/r6-64-n32.d: Change the `name' tag.
|
||
* testsuite/gas/mips/r6-64-n64.d: Likewise.
|
||
|
||
2016-06-20 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (mips_fix_adjustable): Update comment on jump
|
||
reloc conversion.
|
||
|
||
2016-06-20 Virendra Pathak <virendra.pathak@broadcom.com>
|
||
|
||
* config/tc-aarch64.c (aarch64_cpus): Update vulcan feature set.
|
||
|
||
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
|
||
|
||
* config/tc-sparc.c (hpriv_reg_table): Add registers %hmcdper,
|
||
%hmcddfr and %hva_mask_nz.
|
||
(sparc_ip): New handling of asr/privileged/hyperprivileged
|
||
registers, adapted to the new form of the sparc opcodes table.
|
||
* testsuite/gas/sparc/rdasr.s: New file.
|
||
* testsuite/gas/sparc/rdasr.d: Likewise.
|
||
* testsuite/gas/sparc/wrasr.s: Likewise.
|
||
* testsuite/gas/sparc/wrasr.d: Likewise.
|
||
* testsuite/gas/sparc/sparc.exp (sparc_elf_setup): Add rdasr and
|
||
wrasr tests.
|
||
* testsuite/gas/sparc/rdpr.d: Use -Av9m, as some privileged
|
||
registers require it.
|
||
* testsuite/gas/sparc/wrpr.s: Complete to cover all privileged
|
||
registers and write instruction modalities.
|
||
* testsuite/gas/sparc/wrpr.d: Likewise.
|
||
* testsuite/gas/sparc/rdhpr.s: Likewise for hyperprivileged
|
||
registers.
|
||
* testsuite/gas/sparc/rdhpr.d: Likewise.
|
||
* testsuite/gas/sparc/wrhpr.s: Likewise.
|
||
* testsuite/gas/sparc/wrhpr.d: Likewise.
|
||
|
||
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
|
||
|
||
* config/tc-sparc.c (sparc_arch_table): adjust the GAS
|
||
architectures to use the right opcode architecture.
|
||
(sparc_md_end): Handle v9{c,d,e,v,m}.
|
||
(sparc_ip): Fix some comments.
|
||
* testsuite/gas/sparc/ldx_efsr.d: Fix the architecture of this
|
||
instruction, which is v9d.
|
||
* testsuite/gas/sparc/mwait.s: Remove the `rd %mwait,%g1'
|
||
instruction from the test, as %mwait is not readable.
|
||
* testsuite/gas/sparc/mwait.d: Likewise.
|
||
* testsuite/gas/sparc/mism-1.s: Expand to check v9b and v9e
|
||
mismatch architecture errors.
|
||
* testsuite/gas/sparc/mism-2.s: New file.
|
||
|
||
2016-06-17 Jose E. Marchesi <jose.marchesi@oracle.com>
|
||
|
||
* config/tc-sparc.c (priv_reg_table): Use NULL instead of the
|
||
empty string to mark the end of the array.
|
||
(hpriv_reg_table): Likewise.
|
||
(v9a_asr_table): Likewise.
|
||
(cmp_reg_entry): Handle entries with NULL names.
|
||
(F_POP_V9): Define.
|
||
(F_POP_PCREL): Likewise.
|
||
(F_POP_TLS_CALL): Likewise.
|
||
(F_POP_POSTFIX): Likewise.
|
||
(struct pop_entry): New type.
|
||
(pop_table): New variable.
|
||
(enum pop_entry_type): New type.
|
||
(struct perc_entry): Likewise.
|
||
(NUM_PERC_ENTRIES): Define.
|
||
(perc_table): New variable.
|
||
(cmp_perc_entry): New function.
|
||
(md_begin): Sort hpriv_reg_table and v9a_asr_table, and initialize
|
||
perc_table.
|
||
(sparc_ip): Handle entries with NULL names in priv_reg_table,
|
||
hpriv_reg_table and v9a_asr_table. Use perc_table to handle
|
||
%-pseudo-ops.
|
||
|
||
2016-06-15 Nick Clifton <nickc@redhat.com>
|
||
|
||
* config/tc-ft32.c (md_assemble): Call dwarf2_emit_insn with the
|
||
instruction size.
|
||
* config/tc-mcore.c (md_assemble): Likewise.
|
||
* config/tc-mn10200.c (md_assemble): Likewise.
|
||
* config/tc-moxie.c (md_assemble): Likewise.
|
||
* config/tc-pj.c (md_apply_fix): Handle BFD_RELOC_PJ_CODE_REL32.
|
||
* testsuite/gas/all/gas.exp (diff1 test): Alpha sort list of
|
||
exception targets. Add alpha, hppa, microblaze and rl78 to list
|
||
of exceptions.
|
||
(forward): Add microblaze to list of exceptions.
|
||
(fwdexp): Add alpha to list of exceptions.
|
||
(redef2): Add arm-epoc-pe and rl78 to list of exceptions.
|
||
(redef3): Add rl78 and x86_64 cygwin to list of exceptions.
|
||
(do_930509a): Alpha sort list of exception targets. Add h8300 and
|
||
mn10200 to list of exceptions.
|
||
(align2): Expect to fail for nds32.
|
||
(cond): Add alpha and rl78 to list of exceptions.
|
||
* testsuite/gas/all/none.d: Skip for ft32 and hppa.
|
||
* testsuite/gas/all/string.d: Skip for tic4x.
|
||
* testsuite/gas/alpha/alpha.exp: Note that the alpha-linuxecoff
|
||
target does not support ELF.
|
||
* testsuite/gas/arm/blx-bl-convert.dL Skip for the nto target.
|
||
* testsuite/gas/cfi/cfi-alpha-2.d: All extended format names.
|
||
* testsuite/gas/cfi/cfi.exp: Alpha sort list of targets. Skip SH
|
||
tests for sh-pe and sh-rtemscoff targets.
|
||
* testsuite/gas/elf/elf.exp (redef): Add rl78, xgate and vax to
|
||
list of exceptions.
|
||
(type): Run the noifunc version for alpha-freebsd and visium.
|
||
* testsuite/gas/elf/warn-2.s: Do not expect to fail on the mcore,
|
||
mn10200 or moxie targets.
|
||
* testsuite/gas/ft32/insn.d: Update expected disassembly.
|
||
* testsuite/gas/i386/i386.exp (x86-64-pcrel): Skip for cygwin
|
||
targets.
|
||
* testsuite/gas/lns/lns.exp (lns-common-1): No longer skip for
|
||
mcore and rx targets.
|
||
* testsuite/gas/macros/macros.exp (dot): Add exceptions for ns32k,
|
||
rl78 and vax.
|
||
(purge): Expect to fail on the ns32k and vax.
|
||
* testsuite/gas/nds32/alu-2.d: Update expected disassembly.
|
||
* testsuite/gas/nds32/ls.d: Likewise.
|
||
* testsuite/gas/nds32/sys-reg.d: Likewise.
|
||
* testsuite/gas/nds32/usr-spe-reg.d: Likewise.
|
||
* testsuite/gas/pe/aligncomm-d.d: Skip for the sh.
|
||
* testsuite/gas/pe/section-align-3.d: Likewise.
|
||
* testsuite/gas/pe/section-exclude.d: Likewise.
|
||
* testsuite/gas/ppc/test2xcoff32.d: Pass once all the required
|
||
data has been seen.
|
||
* testsuite/gas/ppc/textalign-xcoff-001.d: Fix up regexp to allow
|
||
for variations in whitespace.
|
||
* testsuite/gas/tilepro/t_constants.d: Pass once all the required
|
||
data has been seen.
|
||
* testsuite/gas/tilepro/t_constants.s (.safe_word): New macro.
|
||
Installs a 32-bit value without generating warnings on 64-bit
|
||
hosts.
|
||
Use the new macro to replace the .word directives.
|
||
|
||
2016-06-15 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* testsuite/gas/arc/add_s.d: New file.
|
||
* testsuite/gas/arc/add_s.s: New file.
|
||
|
||
2016-06-14 Graham Markall <graham.markall@embecosm.com>
|
||
|
||
* testsuite/gas/arc/nps400-6.s: Add tests of ldbit.
|
||
* testsuite/gas/arc/nps400-6.d: Likewise.
|
||
|
||
2016-06-14 Graham Markall <graham.markall@embecosm.com>
|
||
|
||
* testsuite/gas/arc/nps400-6.s: Add tests of hash, tr, utf8, e4by, and
|
||
addf.
|
||
* testsuite/gas/arc/nps400-6.d: Likewise.
|
||
|
||
2016-06-14 Graham Markall <graham.markall@embecosm.com>
|
||
|
||
* testsuite/gas/arc/nps400-6.s: Add tests of calcbsd, calcbxd,
|
||
calckey, calcxkey, mxb, imxb, addl, subl, andl, orl, xorl, andab, orab,
|
||
lbdsize, bdlen, csms, csma, cbba, zncv, and hofs.
|
||
* testsuite/gas/arc/nps400-6.d: Likewise.
|
||
|
||
2016-06-14 Nick Clifton <nickc@redhat.com>
|
||
|
||
* config/tc-nds32.c (nds32_get_align): Avoid left shifting a
|
||
signed constant.
|
||
|
||
2016-06-13 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (mips_fix_adjustable): Don't convert RELA
|
||
JALR relocations on R6.
|
||
* testsuite/gas/mips/jal-svr4pic-local.d: New test.
|
||
* testsuite/gas/mips/mips1@jal-svr4pic-local.d: New test.
|
||
* testsuite/gas/mips/r3000@jal-svr4pic-local.d: New test.
|
||
* testsuite/gas/mips/micromips@jal-svr4pic-local.d: New test.
|
||
* testsuite/gas/mips/jal-svr4pic-local-n32.d: New test.
|
||
* testsuite/gas/mips/micromips@jal-svr4pic-local-n32.d: New
|
||
test.
|
||
* testsuite/gas/mips/jal-svr4pic-local-n64.d: New test.
|
||
* testsuite/gas/mips/micromips@jal-svr4pic-local-n64.d: New
|
||
test.
|
||
* testsuite/gas/mips/jal-svr4pic-local.s: New test source.
|
||
* testsuite/gas/mips/jal-svr4pic-local-newabi.s: New test
|
||
source.
|
||
* testsuite/gas/mips/mips.exp: Run the new tests.
|
||
|
||
2016-06-13 Virendra Pathak <virendra.pathak@broadcom.com>
|
||
|
||
* config/tc-aarch64.c (aarch64_cpus): Add Broadcom Vulcan.
|
||
* doc/c-aarch64.texi: Document that vulcan is a valid processor
|
||
name.
|
||
|
||
2016-06-13 Nick Clifton <nickc@redhat.com>
|
||
|
||
* config/tc-arm.c: For non-ELF based targets skip ARM feature sets
|
||
that are not supported.
|
||
|
||
* config/tc-arc.c (md_apply_fix): Avoid left shifting a signed
|
||
constant.
|
||
* config/tc-cr16.c (check_range): Likewise.
|
||
* config/tc-nios2.c (nios2_check_overflow): Likewise.
|
||
|
||
2016-06-08 Renlin Li <renlin.li@arm.com>
|
||
|
||
* config/tc-aarch64.c (print_operands): Substitute size.
|
||
(output_operand_error_record): Likewise.
|
||
|
||
2016-06-07 Alan Modra <amodra@gmail.com>
|
||
|
||
* config/tc-ppc.c (PPC_APUINFO_ISEL, PPC_APUINFO_PMR,
|
||
PPC_APUINFO_RFMCI, PPC_APUINFO_CACHELCK, PPC_APUINFO_SPE,
|
||
PPC_APUINFO_EFS, PPC_APUINFO_BRLOCK, PPC_APUINFO_VLE): Don't define.
|
||
(ppc_setup_opcodes): Check vle disables powerpc_opcodes overridden
|
||
by vle_opcodes, and that vle flag doesn't enable opcodes. Don't
|
||
add vle_opcodes twice.
|
||
(ppc_cleanup): Use APUINFO_SECTION_NAME and APUINFO_LABEL.
|
||
|
||
2016-06-07 Matthew Wahab <matthew.wahab@arm.com>
|
||
|
||
* config/tc-arm.c (arm_ext_v8_2): Rename to arm_ext_ras.
|
||
(arm_ext_ras): Renamed from arm_ext_v8_2.
|
||
(insns): Update for arm_ext_v8_2 renaming.
|
||
(arm_extensions): Add "ras".
|
||
* doc/c-arm.texi (ARM Options): Add an entry for "ras".
|
||
* testsuite/gas/arm/armv8-a+ras.d: New.
|
||
* testsuite/gas/arm/armv8_2-a.d: Add explicit command line
|
||
options.
|
||
|
||
2016-06-05 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* itbl-parse.y (yyerror): Use modern argument declaration style.
|
||
|
||
2016-06-05 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-sh.c (parse_reg): Change type of mode argument to
|
||
sh_arg_type.
|
||
(get_operand): Adjust.
|
||
(insert): Change type of how to bfd_reloc_code_real_type.
|
||
(insert4): Likewise.
|
||
* config/tc-sh64.c (shmedia_get_operand): Adjust.
|
||
(shmedia_parse_reg): Change type of mode to shmedia_arg_type.
|
||
|
||
2016-06-05 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-nds32.c (nds32_parse_option): Make the type of ptr_arg
|
||
const char *.
|
||
|
||
2016-06-03 Peter Bergner <bergner@vnet.ibm.com>
|
||
|
||
PR binutils/20196
|
||
* gas/testsuite/gas/ppc/e6500.s <lbarx, lharx, lwarx, ldarx,
|
||
stbcx., sthcx., stwcx., stdcx.>: Add tests.
|
||
* gas/testsuite/gas/ppc/e6500.d: Likewise.
|
||
* gas/testsuite/gas/ppc/power8.s: Likewise.
|
||
* gas/testsuite/gas/ppc/power8.d: Likewise.
|
||
* gas/testsuite/gas/ppc/power4.s <lwarx, ldarx, stwcx.,
|
||
stdcx.>: Add tests.
|
||
* gas/testsuite/gas/ppc/power4.d: Likewise.
|
||
|
||
2016-06-03 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
PR binutis/18386
|
||
* testsuite/gas/i386/i386.exp: Run x86-64-branch-4.
|
||
* testsuite/gas/i386/x86-64-branch.d: Updated.
|
||
* testsuite/gas/i386/ilp32/x86-64-branch.d: Likewise.
|
||
* testsuite/gas/i386/x86-64-branch-4.l: New file.
|
||
* testsuite/gas/i386/x86-64-branch-4.s: Likewise.
|
||
|
||
2016-06-03 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
|
||
|
||
* config/tc-aarch64.c (aarch64_cpus): Add cortex-a73 entry.
|
||
* doc/c-aarch64.texi (-mcpu): Document cortex-a73 value.
|
||
|
||
2016-06-03 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
|
||
|
||
* config/tc-arm.c (arm_cpus): Add cortex-a73 entry.
|
||
* doc/c-arm.texi (-mcpu=): Document cortex-a73 value.
|
||
|
||
2016-06-02 Vineet Gupta <Vineet.Gupta1@synopsys.com>
|
||
|
||
* configure.tgt: Replace -uclibc with *.
|
||
|
||
2016-06-02 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config/tc-arc.c (parse_opcode_flags): New function.
|
||
(find_opcode_match): Move flag parsing code out to new function.
|
||
Ignore operands marked IGNORE.
|
||
(build_fake_opcode_hash_entry): New function.
|
||
(find_special_case_long_opcode): New function.
|
||
(find_special_case): Lookup long opcodes.
|
||
* testsuite/gas/arc/nps400-7.d: New file.
|
||
* testsuite/gas/arc/nps400-7.s: New file.
|
||
|
||
2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-ns32k.c: Remove definition of input_line_pointer.
|
||
|
||
2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-avr.c (avr_parse_cons_expression): Replace iteration to
|
||
sentinal with iteration to array size.
|
||
|
||
2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/xtensa-relax.h: Move typedefs of enums to the enums
|
||
definition.
|
||
|
||
2016-06-01 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-ns32k.c (bit_fix_new): Replace obstack-alloc with XOBNEW
|
||
macro.
|
||
|
||
2016-06-01 Graham Markall <graham.markall@embecosm.com>
|
||
|
||
* testsuite/gas/arc/nps-400-1.s: Add rflt variants with
|
||
operands of types a,b,u6, 0,b,u6, and 0,b,limm.
|
||
* testsuite/gas/arc/nps-400-1.d: Likewise.
|
||
|
||
2016-05-29 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
PR gas/20145
|
||
* config/tc-i386.c (cpu_noarch): Add noavx512f, noavx512cd,
|
||
noavx512er, noavx512pf, noavx512dq, noavx512bw, noavx512vl,
|
||
noavx512ifma and noavx512vbmi.
|
||
* doc/c-i386.texi: Mention noavx512f, noavx512cd, noavx512er,
|
||
noavx512pf, noavx512dq, noavx512bw, noavx512vl, noavx512ifma
|
||
and noavx512vbmi.
|
||
* testsuite/gas/i386/i386.exp: Run noavx512-1 and noavx512-2.
|
||
* testsuite/gas/i386/noavx512-1.l: New file.
|
||
* testsuite/gas/i386/noavx512-1.s: Likewise.
|
||
* testsuite/gas/i386/noavx512-2.l: Likewise.
|
||
* testsuite/gas/i386/noavx512-2.s: Likewise.
|
||
|
||
2016-05-27 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
PR gas/20145
|
||
* config/tc-i386.c (cpu_arch): Add 687.
|
||
(cpu_noarch): Add no287, no387, no687, nosse2, nosse3, nossse3,
|
||
nosse4.1, nosse4.2, nosse4 and noavx2.
|
||
(parse_real_register): Check cpuregmmx instead of cpummx for MMX
|
||
register. Check cpuregxmm instead of cpusse for XMM register.
|
||
Check cpuregymm instead of cpuavx for YMM register. Check
|
||
cpuregzmm/cpuregmask instead of cpuavx512f for ZMMM/mask register.
|
||
* doc/c-i386.texi: Mention 687, no287, no387, no687, nosse2,
|
||
nosse3, nossse3, nosse4.1, nosse4.2, nosse4 and noavx2.
|
||
* testsuite/gas/i386/arch-10-prefetchw.d (as): Add mmx.
|
||
* testsuite/gas/i386/arch-10.d (as): Likewise.
|
||
* testsuite/gas/i386/arch-11.s: Add ".arch .mmx".
|
||
* testsuite/gas/i386/i386.exp: Pass mmx to assembler for
|
||
arch-10-3 and arch-10-4. Run no87-3, nosse-4, nosse-5, noavx-3
|
||
and noavx-4.
|
||
* testsuite/gas/i386/no87-3.l: New file.
|
||
* testsuite/gas/i386/no87-3.s: Likewise.
|
||
* testsuite/gas/i386/noavx-3.l: Likewise.
|
||
* testsuite/gas/i386/noavx-3.s: Likewise.
|
||
* testsuite/gas/i386/noavx-4.d: Likewise.
|
||
* testsuite/gas/i386/noavx-4.s: Likewise.
|
||
* testsuite/gas/i386/nosse-4.l: Likewise.
|
||
* testsuite/gas/i386/nosse-4.s: Likewise.
|
||
* testsuite/gas/i386/nosse-5.d: Likewise.
|
||
* testsuite/gas/i386/nosse-5.s: Likewise.
|
||
|
||
2016-05-27 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
PR gas/20154
|
||
* config/tc-i386.c (cpu_flags_match): Don't set cpuamd64 nor
|
||
cpuintel64.
|
||
(match_template): Check Intel64/AMD64 ISA.
|
||
|
||
2016-05-27 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
PR gas/20154
|
||
* config/tc-i386.c (intel64): New.
|
||
(cpu_flags_match): Set cpuamd64 and cpuintel64.
|
||
(md_parse_option): Set intel64 instead of cpuamd64 and
|
||
cpuintel64.
|
||
|
||
2016-05-27 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
* config/tc-i386.c (cpu_flags_match): Don't clear cpu64 nor
|
||
cpuno64.
|
||
|
||
2016-05-26 Peter Bergner <bergner@vnet.ibm.com>
|
||
|
||
* testsuite/gas/ppc/altivec3.d <vmsumudm>: Add test.
|
||
* testsuite/gas/ppc/altivec3.s: Likewise.
|
||
* testsuite/gas/ppc/power9.d <addex[.], lwzmx, vmsumudm>: Add tests.
|
||
* testsuite/gas/ppc/power9.s: Likewise.
|
||
|
||
2016-05-26 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
* testsuite/gas/i386/avx512vl-2.l: Append "#pass".
|
||
* testsuite/gas/i386/noavx-1.l: Likewise.
|
||
* testsuite/gas/i386/nommx-1.l: Likewise.
|
||
* testsuite/gas/i386/nosse-1.l: Likewise.
|
||
* testsuite/gas/i386/x86-64-avx512vl-2.l: Likewise.
|
||
* testsuite/gas/i386/avx512vl-2.s: Append ".p2align 4".
|
||
* testsuite/gas/i386/noavx-1.s: Likewise.
|
||
* testsuite/gas/i386/nommx-1.s: Likewise.
|
||
* testsuite/gas/i386/nosse-1.s: Likewise.
|
||
* testsuite/gas/i386/x86-64-avx512vl-2.s: Likewise.
|
||
|
||
2016-05-26 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-metag.c (metag_handle_align): Make the type of noop
|
||
unsigned char.
|
||
|
||
2016-05-26 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-rx.c (md_convert_frag): Make the type of reloc_type
|
||
bfd_reloc_code_real_type.
|
||
|
||
2016-05-25 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
PR gas/20140
|
||
* config/tc-i386.c (cpu_flags_match): Require another match
|
||
for AVX512VL.
|
||
* testsuite/gas/i386/i386.exp: Run avx512vl-1, avx512vl-2,
|
||
x86-64-avx512vl-1 and x86-64-avx512vl-2.
|
||
* testsuite/gas/i386/avx512vl-1.l: New file.
|
||
* testsuite/gas/i386/avx512vl-1.s: Likewise.
|
||
* testsuite/gas/i386/avx512vl-2.l: Likewise.
|
||
* testsuite/gas/i386/avx512vl-2.s: Likewise.
|
||
* testsuite/gas/i386/x86-64-avx512vl-1.l: Likewise.
|
||
* testsuite/gas/i386/x86-64-avx512vl-1.s: Likewise.
|
||
* testsuite/gas/i386/x86-64-avx512vl-2.l: Likewise.
|
||
* testsuite/gas/i386/x86-64-avx512vl-2.s: Likewise.
|
||
|
||
2016-05-25 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
PR gas/20141
|
||
* testsuite/gas/i386/i386.exp: Run x86-64-pr20141.
|
||
* testsuite/gas/i386/x86-64-pr20141.d: New file.
|
||
* testsuite/gas/i386/x86-64-pr20141.s: Likewise.
|
||
|
||
2016-05-25 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
* config/tc-i386.c (arch_entry): Remove negated.
|
||
(noarch_entry): New struct.
|
||
(cpu_arch): Updated. Remove .no87, .nommx, .nosse and .noavx.
|
||
(cpu_noarch): New.
|
||
(set_cpu_arch): Check cpu_noarch after cpu_arch.
|
||
(md_parse_option): Allow -march=+nosse. Check cpu_noarch after
|
||
cpu_arch.
|
||
(output_message): New function.
|
||
(show_arch): Use it. Handle cpu_noarch.
|
||
* testsuite/gas/i386/i386.exp: Run nommx-1, nommx-2, nommx-3,
|
||
nosse-1, nosse-2, nosse-3, noavx-1 and noavx-2.
|
||
* testsuite/gas/i386/noavx-1.l: New file.
|
||
* testsuite/gas/i386/noavx-1.s: Likewise.
|
||
* testsuite/gas/i386/noavx-2.s: Likewise.
|
||
* testsuite/gas/i386/noavx-2.l: Likewise.
|
||
* testsuite/gas/i386/nommx-1.s: Likewise.
|
||
* testsuite/gas/i386/nommx-1.l: Likewise.
|
||
* testsuite/gas/i386/nommx-2.s: Likewise.
|
||
* testsuite/gas/i386/nommx-2.l: Likewise.
|
||
* testsuite/gas/i386/nommx-3.s: Likewise.
|
||
* testsuite/gas/i386/nommx-3.l: Likewise.
|
||
* testsuite/gas/i386/nosse-1.s: Likewise.
|
||
* testsuite/gas/i386/nosse-1.l: Likewise.
|
||
* testsuite/gas/i386/nosse-2.s: Likewise.
|
||
* testsuite/gas/i386/nosse-2.l: Likewise.
|
||
* testsuite/gas/i386/nosse-3.s: Likewise.
|
||
* testsuite/gas/i386/nosse-3.l: Likewise.
|
||
|
||
2016-05-25 Chua Zheng Leong <chuazl@comp.nus.edu.sg>
|
||
|
||
PR target/20067
|
||
* config/tc-arm.c (move_or_literal_pool): Only generate a VMOV.I64
|
||
instruction if supported by the currently selected fpu variant.
|
||
* testsuite/gas/arm/vfpv3-ldr_immediate.s: Add test of this PR.
|
||
* testsuite/gas/arm/vfpv3-ldr_immediate.d: Update expected disassembly.
|
||
|
||
2016-05-24 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (mips_fix_adjustable): Also return 0 for
|
||
jump relocations against MIPS16 or microMIPS symbols on RELA
|
||
targets.
|
||
* testsuite/gas/mips/jalx-local.d: New test.
|
||
* testsuite/gas/mips/jalx-local-n32.d: New test.
|
||
* testsuite/gas/mips/jalx-local-n64.d: New test.
|
||
* testsuite/gas/mips/jalx-local.s: New test source.
|
||
* testsuite/gas/mips/mips.exp: Run the new tests.
|
||
|
||
2016-05-24 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (md_apply_fix)
|
||
<BFD_RELOC_MIPS16_TLS_TPREL_LO16>: Remove fall-through, adjust
|
||
code accordingly.
|
||
|
||
2016-05-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-xtensa.c (struct suffix_reloc_map): Change type of field
|
||
operator to operatorT.
|
||
(map_suffix_reloc_to_operator): Change return type to operatorT.
|
||
|
||
2016-05-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-d30v.c (find_format): Change type of X_op to operatorT.
|
||
|
||
2016-05-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-mmix.c (mmix_parse_predefined_name): Change type of
|
||
handler_charp to const char *.
|
||
|
||
2016-05-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-ft32.h (DEFAULT_TARGET_FORMAT): Remove.
|
||
(ft32_target_format): Likewise.
|
||
(TARGET_FORMAT): Adjust.
|
||
|
||
2016-05-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-ia64.c (dot_rot): simplify allocations from obstacks.
|
||
(ia64_frob_label): Likewise.
|
||
|
||
2016-05-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-cr16.c (check_range): Make type of retval op_err.
|
||
* config/tc-crx.c: Likewise.
|
||
|
||
2016-05-23 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* config/tc-arc.c (md_begin): Add XY registers.
|
||
(cpu_types): Code density is default off for ARC EM.
|
||
|
||
2016-05-23 Cupertino Miranda <cmiranda@synopsys.com>
|
||
|
||
* config/tc-arc.c (attributes_t): Renamed attribute class to
|
||
attr_class.
|
||
(find_opcode_match, assemble_insn, tokenize_extinsn): Changed.
|
||
|
||
2016-05-23 Kuba Sejdak <jakub.sejdak@phoesys.com>
|
||
|
||
* configuse.tgt: Add entry for arm-phoenix.
|
||
|
||
2016-05-23 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-tic54x.c (tic54x_sect): simplify string creation.
|
||
|
||
2016-05-23 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-spu.c (APUOP): Use OPCODE as an unsigned constant.
|
||
|
||
2016-05-23 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-tic54x.c (tic54x_mmregs): Adjust.
|
||
(md_begin): Likewise.
|
||
(encode_condition): Likewise.
|
||
(encode_cc3): Likewise.
|
||
(encode_cc2): Likewise.
|
||
(encode_operand): Likewise.
|
||
(tic54x_undefined_symbol): Likewise.
|
||
|
||
2016-05-20 Matthew Fortune <matthew.fortune@imgtec.com>
|
||
|
||
* config/tc-mips.c (mips_cpu_info_table): Update comment. Add
|
||
p6600 entry.
|
||
* doc/c-mips.texi: Document p6600 -march option.
|
||
|
||
2016-05-20 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
PR gas/19600
|
||
* config/tc-i386.c (md_apply_fix): Preserve addend for
|
||
BFD_RELOC_386_GOT32 and BFD_RELOC_X86_64_GOT32.
|
||
* testsuite/gas/i386/addend.d: New file.
|
||
* testsuite/gas/i386/addend.s: Likewise.
|
||
* testsuite/gas/i386/x86-64-addend.d: Likewise.
|
||
* testsuite/gas/i386/x86-64-addend.s: Likewise.
|
||
* testsuite/gas/i386/i386.exp: Run addend and x86-64-addend.
|
||
* testsuite/gas/i386/reloc32.d: Updated.
|
||
|
||
2016-05-20 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (append_insn): Correct the encoding of a
|
||
constant argument for microMIPS JALX.
|
||
(tc_gen_reloc): Correct the encoding of an in-place addend for
|
||
microMIPS JALX.
|
||
* testsuite/gas/mips/jalx-addend.d: New test.
|
||
* testsuite/gas/mips/jalx-addend-n32.d: New test.
|
||
* testsuite/gas/mips/jalx-addend-n64.d: New test.
|
||
* testsuite/gas/mips/jalx-imm.d: New test.
|
||
* testsuite/gas/mips/jalx-imm-n32.d: New test.
|
||
* testsuite/gas/mips/jalx-imm-n64.d: New test.
|
||
* testsuite/gas/mips/jalx-addend.s: New test source.
|
||
* testsuite/gas/mips/jalx-imm.s: New test source.
|
||
* testsuite/gas/mips/mips.exp: Run the new tests.
|
||
|
||
2016-05-20 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c: Correct tab-after-space formatting mistakes
|
||
throughout.
|
||
|
||
2016-05-18 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config/tc-arc.c (find_opcode_match): Remove casting away of
|
||
const.
|
||
* config/tc-arc.h (struct arc_flags): Make flgp field const.
|
||
|
||
2016-05-18 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config/tc-arc.c (md_pcrel_from_section): Use BFD_VMA_FMT where
|
||
appropriate.
|
||
(md_convert_frag): Likewise.
|
||
|
||
2016-05-18 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config/tc-arc.c (arc_opcode_hash_entry_iterator_next): Set
|
||
cached opcode to NULL when we reach a non-matching opcode.
|
||
* testsuite/gas/arc/asm-errors-2.d: New file.
|
||
* testsuite/gas/arc/asm-errors-2.err: New file.
|
||
* testsuite/gas/arc/asm-errors-2.s: New file.
|
||
|
||
2016-05-18 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config/tc-arc.c (tokenize_arguments): Add checks for array
|
||
overflow.
|
||
* testsuite/gas/arc/asm-errors.s: Addition test line added.
|
||
* testsuite/gas/arc/asm-errors.err: Update expected results.
|
||
|
||
2016-05-18 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-rx.c (struct cpu_type): Change the type of a field from
|
||
int to enum rx_cpu_types.
|
||
|
||
2016-05-18 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-dlx.c (struct machine_it): change the type of a field from
|
||
int to bfd_reloc_code_real_type.
|
||
* config/tc-tic4x.c: Likewise.
|
||
|
||
2016-05-18 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-v850.c (v850_target_arch): change type to enum
|
||
bfd_architecture.
|
||
* config/tc-v850.h (v850_target_arch): Likewise.
|
||
|
||
2016-05-18 Alan Modra <amodra@gmail.com>
|
||
|
||
* config/tc-ppc.c (ppc_insert_operand): Trim PPC_OPERAND_SIGNOPT
|
||
allowed negative range.
|
||
* testsuite/gas/ppc/power9.s: Test xxspltib of -128, not -256.
|
||
* testsuite/gas/ppc/power9.d: Update.
|
||
|
||
2016-05-17 Thomas Preud'homme <thomas.preudhomme@arm.com>
|
||
|
||
* testsuite/gas/arm/archv8m-cmse-msr-base.d: Force Thumb when
|
||
disassembling and stop skipping targets.
|
||
* testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-main-dsp-4.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-base.d: Also allow nops after the last
|
||
instruction for targets that have stronger alignment requirement.
|
||
* testsuite/gas/arm/archv8m-cmse-base.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-cmse-main-1.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-cmse-main-2.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-main-dsp-1.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-main-dsp-2.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-main-dsp-3.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-main.d: Likewise.
|
||
* testsuite/gas/arm/archv8m.s: Add label.
|
||
* testsuite/gas/arm/archv8m-cmse.s: Likewise.
|
||
* testsuite/gas/arm/archv8m-cmse-msr.s: Likewise.
|
||
* testsuite/gas/arm/archv8m-cmse-main.s: Likewise.
|
||
|
||
2016-05-16 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-m32r.c (mach_table): Make static and const.
|
||
|
||
2016-05-16 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-vax.c (flonum_gen2vax): Adjust prototype to match
|
||
definition.
|
||
|
||
2016-05-16 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-mn10300.c (md_begin): set linkrelax here instead of
|
||
defining it.
|
||
* config/tc-msp430.c (md_begin): Likewise.
|
||
|
||
2016-05-16 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-m68hc11.c (fixup8): Change variables type from int to
|
||
bfd_reloc_code_real_type where appropriate.
|
||
(fixup16): Likewise.
|
||
(fixup8_xg): Likewise.
|
||
|
||
2016-05-15 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-sh64.c (shmedia_check_limits): Constify `msg'.
|
||
|
||
2016-05-13 Peter Bergner <bergner@vnet.ibm.com>
|
||
|
||
* testsuite/gas/ppc/power9.d <xxspltib>: Add additional operand tests.
|
||
* testsuite/gas/ppc/power9.s: Likewise.
|
||
|
||
2016-05-13 Alan Modra <amodra@gmail.com>
|
||
|
||
* config/obj-coff.c (weak_uniquify): Delete unused var.
|
||
|
||
2016-05-13 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* app.c (app_push): Use XNEW and related macros.
|
||
* as.c (parse_args): Likewise.
|
||
* cgen.c (make_right_shifted_expr): Likewise.
|
||
(gas_cgen_tc_gen_reloc): Likewise.
|
||
* config/bfin-defs.h: Likewise.
|
||
* config/bfin-parse.y: Likewise.
|
||
* config/obj-coff.c (stack_init): Likewise.
|
||
(stack_push): Likewise.
|
||
(coff_obj_symbol_new_hook): Likewise.
|
||
(coff_obj_symbol_clone_hook): Likewise.
|
||
(add_lineno): Likewise.
|
||
(coff_frob_symbol): Likewise.
|
||
* config/obj-elf.c (obj_elf_section_name): Likewise.
|
||
(build_group_lists): Likewise.
|
||
* config/obj-evax.c (evax_symbol_new_hook): Likewise.
|
||
* config/obj-macho.c (obj_mach_o_indirect_symbol): Likewise.
|
||
* config/tc-aarch64.c (insert_reg_alias): Likewise.
|
||
(find_or_make_literal_pool): Likewise.
|
||
(add_to_lit_pool): Likewise.
|
||
(fill_instruction_hash_table): Likewise.
|
||
* config/tc-alpha.c (load_expression): Likewise.
|
||
(emit_jsrjmp): Likewise.
|
||
(s_alpha_ent): Likewise.
|
||
(s_alpha_end): Likewise.
|
||
(s_alpha_linkage): Likewise.
|
||
(md_begin): Likewise.
|
||
(tc_gen_reloc): Likewise.
|
||
* config/tc-arc.c (arc_insert_opcode): Likewise.
|
||
(arc_extcorereg): Likewise.
|
||
* config/tc-bfin.c: Likewise.
|
||
* config/tc-cr16.c: Likewise.
|
||
* config/tc-cris.c: Likewise.
|
||
* config/tc-crx.c (preprocess_reglist): Likewise.
|
||
* config/tc-d10v.c: Likewise.
|
||
* config/tc-frv.c (frv_insert_vliw_insn): Likewise.
|
||
(frv_tomcat_shuffle): Likewise.
|
||
* config/tc-h8300.c: Likewise.
|
||
* config/tc-i370.c (i370_macro): Likewise.
|
||
* config/tc-i386.c (lex_got): Likewise.
|
||
(md_parse_option): Likewise.
|
||
* config/tc-ia64.c (alloc_record): Likewise.
|
||
(set_imask): Likewise.
|
||
(save_prologue_count): Likewise.
|
||
(dot_proc): Likewise.
|
||
(dot_endp): Likewise.
|
||
(ia64_frob_label): Likewise.
|
||
(add_qp_imply): Likewise.
|
||
(add_qp_mutex): Likewise.
|
||
(mark_resource): Likewise.
|
||
(dot_alias): Likewise.
|
||
* config/tc-m68hc11.c: Likewise.
|
||
* config/tc-m68k.c (m68k_frob_label): Likewise.
|
||
(s_save): Likewise.
|
||
(mri_control_label): Likewise.
|
||
(push_mri_control): Likewise.
|
||
(build_mri_control_operand): Likewise.
|
||
(s_mri_else): Likewise.
|
||
(s_mri_break): Likewise.
|
||
(s_mri_next): Likewise.
|
||
(s_mri_for): Likewise.
|
||
(s_mri_endw): Likewise.
|
||
* config/tc-metag.c (create_mnemonic_htab): Likewise.
|
||
* config/tc-microblaze.c: Likewise.
|
||
* config/tc-mmix.c (s_loc): Likewise.
|
||
* config/tc-nds32.c (nds32_relax_hint): Likewise.
|
||
* config/tc-nios2.c (nios2_insn_reloc_new): Likewise.
|
||
* config/tc-rl78.c: Likewise.
|
||
* config/tc-rx.c (rx_include): Likewise.
|
||
* config/tc-sh.c: Likewise.
|
||
* config/tc-sh64.c (shmedia_frob_section_type): Likewise.
|
||
* config/tc-sparc.c: Likewise.
|
||
* config/tc-spu.c: Likewise.
|
||
* config/tc-tic6x.c (static tic6x_unwind_info *tic6x_get_unwind): Likewise.
|
||
(tic6x_start_unwind_section): Likewise.
|
||
* config/tc-tilegx.c: Likewise.
|
||
* config/tc-tilepro.c: Likewise.
|
||
* config/tc-v850.c: Likewise.
|
||
* config/tc-visium.c: Likewise.
|
||
* config/tc-xgate.c: Likewise.
|
||
* config/tc-xtensa.c (xtensa_translate_old_userreg_ops): Likewise.
|
||
(new_resource_table): Likewise.
|
||
(resize_resource_table): Likewise.
|
||
(xtensa_create_trampoline_frag): Likewise.
|
||
(xtensa_maybe_create_literal_pool_frag): Likewise.
|
||
(cache_literal_section): Likewise.
|
||
* config/xtensa-relax.c (append_transition): Likewise.
|
||
(append_condition): Likewise.
|
||
(append_value_condition): Likewise.
|
||
(append_constant_value_condition): Likewise.
|
||
(append_literal_op): Likewise.
|
||
(append_label_op): Likewise.
|
||
(append_constant_op): Likewise.
|
||
(append_field_op): Likewise.
|
||
(append_user_fn_field_op): Likewise.
|
||
(enter_opname_n): Likewise.
|
||
(enter_opname): Likewise.
|
||
(split_string): Likewise.
|
||
(parse_insn_templ): Likewise.
|
||
(clone_req_or_option_list): Likewise.
|
||
(clone_req_option_list): Likewise.
|
||
(parse_option_cond): Likewise.
|
||
(parse_insn_pattern): Likewise.
|
||
(parse_insn_repl): Likewise.
|
||
(build_transition): Likewise.
|
||
(build_transition_table): Likewise.
|
||
* dw2gencfi.c (alloc_fde_entry): Likewise.
|
||
(alloc_cfi_insn_data): Likewise.
|
||
(cfi_add_CFA_remember_state): Likewise.
|
||
(dot_cfi_escape): Likewise.
|
||
(dot_cfi_fde_data): Likewise.
|
||
(select_cie_for_fde): Likewise.
|
||
* dwarf2dbg.c (dwarf2_directive_loc): Likewise.
|
||
* ecoff.c (ecoff_add_bytes): Likewise.
|
||
(ecoff_build_debug): Likewise.
|
||
* input-scrub.c (input_scrub_push): Likewise.
|
||
(input_scrub_begin): Likewise.
|
||
(input_scrub_next_buffer): Likewise.
|
||
* itbl-ops.c (append_insns_as_macros): Likewise.
|
||
(alloc_entry): Likewise.
|
||
(alloc_field): Likewise.
|
||
* listing.c (listing_newline): Likewise.
|
||
(listing_listing): Likewise.
|
||
* macro.c (get_any_string): Likewise.
|
||
(delete_macro): Likewise.
|
||
* stabs.c (generate_asm_file): Likewise.
|
||
(stabs_generate_asm_lineno): Likewise.
|
||
* subsegs.c (subseg_change): Likewise.
|
||
(subseg_get): Likewise.
|
||
* symbols.c (define_dollar_label): Likewise.
|
||
(symbol_relc_make_sym): Likewise.
|
||
* write.c (write_relocs): Likewise.
|
||
|
||
2016-05-13 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/obj-coff.c (obj_coff_def): Simplify string copying.
|
||
(weak_name2altname): Likewise.
|
||
(weak_uniquify): Likewise.
|
||
(obj_coff_section): Likewise.
|
||
(obj_coff_init_stab_section): Likewise.
|
||
* config/obj-elf.c (obj_elf_section_name): Likewise.
|
||
(obj_elf_init_stab_section): Likewise.
|
||
* config/obj-evax.c (evax_shorten_name): Likewise.
|
||
* config/obj-macho.c (obj_mach_o_make_or_get_sect): Likewise.
|
||
* config/tc-aarch64.c (create_register_alias): Likewise.
|
||
* config/tc-alpha.c (load_expression): Likewise.
|
||
(s_alpha_file): Likewise.
|
||
(s_alpha_section_name): Likewise.
|
||
(tc_gen_reloc): Likewise.
|
||
* config/tc-arc.c (md_assemble): Likewise.
|
||
* config/tc-arm.c (create_neon_reg_alias): Likewise.
|
||
(start_unwind_section): Likewise.
|
||
* config/tc-hppa.c (pa_build_unwind_subspace): Likewise.
|
||
(hppa_elf_mark_end_of_function): Likewise.
|
||
* config/tc-nios2.c (nios2_modify_arg): Likewise.
|
||
(nios2_negate_arg): Likewise.
|
||
* config/tc-rx.c (rx_section): Likewise.
|
||
* config/tc-sh64.c (sh64_consume_datalabel): Likewise.
|
||
* config/tc-tic30.c (tic30_find_parallel_insn): Likewise.
|
||
* config/tc-tic54x.c (tic54x_include): Likewise.
|
||
(tic54x_macro_info): Likewise.
|
||
(subsym_get_arg): Likewise.
|
||
(subsym_substitute): Likewise.
|
||
(tic54x_start_line_hook): Likewise.
|
||
* config/tc-xtensa.c (xtensa_literal_prefix): Likewise.
|
||
(xg_reverse_shift_count): Likewise.
|
||
* config/xtensa-relax.c (enter_opname_n): Likewise.
|
||
(split_string): Likewise.
|
||
* dwarf2dbg.c (get_filenum): Likewise.
|
||
(process_entries): Likewise.
|
||
* expr.c (operand): Likewise.
|
||
* itbl-ops.c (alloc_entry): Likewise.
|
||
* listing.c (listing_message): Likewise.
|
||
(listing_title): Likewise.
|
||
* macro.c (check_macro): Likewise.
|
||
* stabs.c (s_xstab): Likewise.
|
||
* symbols.c (symbol_relc_make_expr): Likewise.
|
||
* write.c (compress_debug): Likewise.
|
||
|
||
2016-05-12 Nick Clifton <nickc@redhat.com>
|
||
|
||
PR target/20068
|
||
* testsuite/gas/arm/pr20068.d: Use correct regexp syntax.
|
||
|
||
2016-05-11 Nick Clifton <nickc@redhat.com>
|
||
|
||
PR target/20068
|
||
* testsuite/gas/arm/pr20068.d: Adjust expected output to allow for
|
||
big endian ARM configurations.
|
||
|
||
2016-05-11 Andrew Bennett <andrew.bennett@imgtec.com>
|
||
Matthew Fortune <matthew.fortune@imgtec.com>
|
||
|
||
* config/tc-mips.c (options): Add OPTION_DSPR3 and
|
||
OPTION_NO_DSPR3.
|
||
(md_longopts): Likewise.
|
||
(md_show_usage): Add help for -mdspr3 and -mno-dspr3.
|
||
(mips_ases): Define availability for DSPr3.
|
||
(mips_ase_groups): Add ASE_DSPR3 to the DSP group.
|
||
(mips_convert_ase_flags): Map ASE_DSPR3 to AFL_ASE_DSPR3.
|
||
* doc/as.texinfo: Document -mdspr3, -mno-dspr3. Fix -mdspr2
|
||
formatting.
|
||
* doc/c-mips.texi: Document -mdspr3, -mno-dspr3, .set dspr3 and
|
||
.set nodspr3. Fix -mdspr2 formatting.
|
||
* testsuite/gas/mips/mips32-dspr3.d: New file.
|
||
* testsuite/gas/mips/mips32-dspr3.s: Likewise.
|
||
* testsuite/gas/mips/mips.exp: Run mips32-dspr3 test.
|
||
|
||
2016-05-11 Nick Clifton <nickc@redhat.com>
|
||
|
||
PR target/20068
|
||
* config/tc-arm.c (add_to_lit_pool): Ensure that the padding added
|
||
to the pool uses O_constant.
|
||
* testsuite/gas/arm/pr20068.s: New test.
|
||
* testsuite/gas/arm/pr20068.d: Test driver.
|
||
|
||
2016-05-11 Nick Clifton <nickc@redhat.com>
|
||
|
||
* testsuite/gas/arm/archv8m-cmse-base.d: Skip for non-ELF ARM targets.
|
||
* testsuite/gas/arm/archv8m-cmse-main-1.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-cmse-main-2.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-cmse-msr-base.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-main-dsp-1.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-main-dsp-2.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-main-dsp-3.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-main-dsp-4.d: Likewise.
|
||
|
||
2016-05-10 Alexander Fomin <alexander.fomin@intel.com>
|
||
|
||
* testsuite/gas/i386/i386.exp: Run RDPID tests.
|
||
* testsuite/gas/i386/prefix.d: Adjust.
|
||
* testsuite/gas/i386/rdpid.s: New test.
|
||
* testsuite/gas/i386/rdpid.d: Ditto.
|
||
* testsuite/gas/i386/rdpid-intel.d: Ditto.
|
||
* testsuite/gas/i386/x86-64-rdpid.s: Ditto.
|
||
* testsuite/gas/i386/x86-64-rdpid.d: Ditto.
|
||
* testsuite/gas/i386/x86-64-rdpid-intel.d: Ditto.
|
||
|
||
2016-05-10 Alexander Fomin <alexander.fomin@intel.com>
|
||
|
||
* config/tc-i386.c (cpu_arch): Add RDPID.
|
||
* doc/c-i386.texi: Document RDPID.
|
||
|
||
2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com>
|
||
|
||
* config/tc-arm.c (arm_adjust_symtab): Use ARM_SET_SYM_BRANCH_TYPE to
|
||
set branch type of a symbol.
|
||
|
||
2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com>
|
||
|
||
* NEWS: Document ARMv8-M and ARMv8-M Security and DSP Extensions.
|
||
* config/tc-arm.c (arm_ext_dsp): New feature for Thumb DSP
|
||
instructions.
|
||
(arm_extensions): Add dsp extension for ARMv8-M Mainline.
|
||
(aeabi_set_public_attributes): Memorize the feature bits of the
|
||
architecture selected for Tag_CPU_arch. Use it to set
|
||
Tag_DSP_extension to 1 for ARMv8-M Mainline with DSP extension.
|
||
(arm_convert_symbolic_attribute): Define Tag_DSP_extension.
|
||
* testsuite/gas/arm/arch7em-bad.d: Rename to ...
|
||
* testsuite/gas/arm/arch7em-bad-1.d: This.
|
||
* testsuite/gas/arm/arch7em-bad-2.d: New file.
|
||
* testsuite/gas/arm/arch7em-bad-3.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-main-dsp-1.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-main-dsp-2.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-main-dsp-3.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-main-dsp-4.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-main-dsp-5.d: Likewise.
|
||
* testsuite/gas/arm/attr-march-armv8m.main.dsp.d: Likewise.
|
||
|
||
2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com>
|
||
|
||
* config/tc-arm.c (struct arm_option_extension_value_table): Make
|
||
allowed_archs an array with 2 entries.
|
||
(ARM_EXT_OPT): Adapt to only fill the first entry of allowed_archs.
|
||
(ARM_EXT_OPT2): New macro filling the two entries of allowed_archs.
|
||
(arm_extensions): Use separate entries in allowed_archs when several
|
||
archs are allowed to use an extension and change ARCH_ANY in
|
||
ARM_ARCH_NONE in allowed_archs.
|
||
(arm_parse_extension): Check that, for each allowed_archs entry, all
|
||
bits are set in the current architecture, ignoring ARM_ANY entries.
|
||
(s_arm_arch_extension): Likewise.
|
||
|
||
2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com>
|
||
|
||
* config/tc-arm.c (arm_ext_m): Add feature bit ARM_EXT2_V8M_MAIN.
|
||
(arm_ext_v8m_main): New feature set for bit ARM_EXT2_V8M_MAIN.
|
||
(arm_ext_v8m_m_only): New feature set for instructions in ARMv8-M not
|
||
shared with a non M profile architecture.
|
||
(do_rn): New function.
|
||
(known_t32_only_insn): Check opcode against arm_ext_v8m_m_only rather
|
||
than arm_ext_v8m.
|
||
(v7m_psrs): Add ARMv8-M security extensions new special registers.
|
||
(insns): Add ARMv8-M Security Extensions instructions.
|
||
(aeabi_set_public_attributes): Use arm_ext_v8m_m_only instead of
|
||
arm_ext_v8m_m to decide the profile and the Thumb ISA.
|
||
* testsuite/gas/arm/archv8m-cmse.s: New file.
|
||
* testsuite/gas/arm/archv8m-cmse-main.s: Likewise..
|
||
* testsuite/gas/arm/archv8m-cmse-msr.s: Likewise.
|
||
* testsuite/gas/arm/any-cmse.d: Likewise.
|
||
* testsuite/gas/arm/any-cmse-main.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-cmse-base.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-cmse-msr-base.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-cmse-main-1.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-cmse-main-2.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise.
|
||
|
||
2016-05-09 Jose E. Marchesi <jose.marchesi@oracle.com>
|
||
|
||
* testsuite/gas/sparc/sparc5vis4.s: Fix mnemonic of faligndatai.
|
||
* testsuite/gas/sparc/sparc5vis4.d: Likewise.
|
||
|
||
2016-05-04 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
|
||
|
||
* config/tc-arm.c (fpu_arch_vfp_v1): Mark with ATTRIBUTE_UNUSED.
|
||
(fpu_arch_vfp_v3): Likewise.
|
||
(fpu_arch_neon_v1): Likewise.
|
||
(arm_arch_full): Likewise.
|
||
(parse_neon_el_struct_list): Initialize fields of firsttype.
|
||
|
||
2016-05-03 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* config/tc-arc.c (syntaxclass): Add SYNTAX_NOP and SYNTAX_1OP.
|
||
(arc_extinsn): Handle new introduced syntax.
|
||
* testsuite/gas/arc/textinsn1op.d: New file.
|
||
* testsuite/gas/arc/textinsn1op.s: Likewise.
|
||
* doc/c-arc.texi: Document SYNTAX_NOP and SYNTAX_1OP.
|
||
|
||
2016-05-03 Pitchumani Sivanupandi <pitchumani.s@atmel.com>
|
||
|
||
* testsuite/gas/lns/lns.exp: Add avr to list of targets using
|
||
DW_LNS_fixed_advance_pc.
|
||
|
||
2016-04-27 Alan Modra <amodra@gmail.com>
|
||
|
||
* as.h (inline, __PTR_TO_INT, __INT_TO_PTR): Don't define.
|
||
(xmemdup0): New inline function.
|
||
|
||
2016-04-22 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (code_option_type): New enum.
|
||
(parse_code_option): Return status indicating option type.
|
||
(s_mipsset): Update `parse_code_option' call site accordingly.
|
||
Always set register sizes from the ISA with ISA overrides.
|
||
(s_module): Update `parse_code_option' call site.
|
||
* testsuite/gas/mips/isa-override-1.d: New test.
|
||
* testsuite/gas/mips/micromips@isa-override-1.d: New test.
|
||
* testsuite/gas/mips/mips1@isa-override-1.d: New test.
|
||
* testsuite/gas/mips/mips2@isa-override-1.d: New test.
|
||
* testsuite/gas/mips/mips32@isa-override-1.d: New test.
|
||
* testsuite/gas/mips/mips32r2@isa-override-1.d: New test.
|
||
* testsuite/gas/mips/mips32r3@isa-override-1.d: New test.
|
||
* testsuite/gas/mips/mips32r5@isa-override-1.d: New test.
|
||
* testsuite/gas/mips/mips32r6@isa-override-1.d: New test.
|
||
* testsuite/gas/mips/mips64r2@isa-override-1.d: New test.
|
||
* testsuite/gas/mips/mips64r3@isa-override-1.d: New test.
|
||
* testsuite/gas/mips/mips64r5@isa-override-1.d: New test.
|
||
* testsuite/gas/mips/mips64r6@isa-override-1.d: New test.
|
||
* testsuite/gas/mips/r3000@isa-override-1.d: New test.
|
||
* testsuite/gas/mips/r3900@isa-override-1.d: New test.
|
||
* testsuite/gas/mips/r5900@isa-override-1.d: New test.
|
||
* testsuite/gas/mips/octeon@isa-override-1.d: New test.
|
||
* testsuite/gas/mips/octeon3@isa-override-1.d: New test.
|
||
* testsuite/gas/mips/isa-override-2.l: New list test.
|
||
* testsuite/gas/mips/mips1@isa-override-2.l: New list test.
|
||
* testsuite/gas/mips/mips2@isa-override-2.l: New list test.
|
||
* testsuite/gas/mips/mips32@isa-override-2.l: New list test.
|
||
* testsuite/gas/mips/mips32r2@isa-override-2.l: New list test.
|
||
* testsuite/gas/mips/mips32r3@isa-override-2.l: New list test.
|
||
* testsuite/gas/mips/mips32r5@isa-override-2.l: New list test.
|
||
* testsuite/gas/mips/mips32r6@isa-override-2.l: New list test.
|
||
* testsuite/gas/mips/r3000@isa-override-2.l: New list test.
|
||
* testsuite/gas/mips/r3900@isa-override-2.l: New list test.
|
||
* testsuite/gas/mips/octeon3@isa-override-2.l: New list test.
|
||
* testsuite/gas/mips/octeon3@isa-override-1.l: New stderr
|
||
output.
|
||
* testsuite/gas/mips/isa-override-1.s: New test source.
|
||
* testsuite/gas/mips/r5900@isa-override-1.s: New test source.
|
||
* testsuite/gas/mips/isa-override-2.s: New test source.
|
||
* testsuite/gas/mips/mips1@isa-override-2.s: New test source.
|
||
* testsuite/gas/mips/mips2@isa-override-2.s: New test source.
|
||
* testsuite/gas/mips/mips32@isa-override-2.s: New test source.
|
||
* testsuite/gas/mips/mips32r2@isa-override-2.s: New test source.
|
||
* testsuite/gas/mips/mips32r3@isa-override-2.s: New test source.
|
||
* testsuite/gas/mips/mips32r5@isa-override-2.s: New test source.
|
||
* testsuite/gas/mips/mips32r6@isa-override-2.s: New test source.
|
||
* testsuite/gas/mips/r3000@isa-override-2.s: New test source.
|
||
* testsuite/gas/mips/r3900@isa-override-2.s: New test source.
|
||
* testsuite/gas/mips/octeon3@isa-override-2.s: New test source.
|
||
* testsuite/gas/mips/mips.exp: Run the new tests.
|
||
|
||
2016-04-20 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* cgen.c: Likewise.
|
||
* config/tc-bfin.c: Likewise.
|
||
* config/tc-ia64.c: Likewise.
|
||
* config/tc-mep.c: Likewise.
|
||
* config/tc-metag.c: Likewise.
|
||
* config/tc-nios2.c: Likewise.
|
||
* config/tc-rl78.c: Likewise.
|
||
|
||
2016-04-20 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* doc/c-arc.texi (ARC Options): Add nps400 to list of valus for
|
||
-mcpu. Add cross reference to .cpu directive from -mcpu option.
|
||
(ARC Directives): Add NPS400 to .cpu directive list.
|
||
|
||
2016-04-20 Matthew Wahab <matthew.wahab@arm.com>
|
||
|
||
* config/tc-aarch64.c (aarch64_features): Add "ras".
|
||
* doc/c-aarch64.texi (AArch64 Extensions): Add "ras".
|
||
* testsuite/gas/aarch64/armv8-ras-1.d: New.
|
||
* testsuite/gas/aarch64/armv8-ras-1.s: New.
|
||
* testsuite/gas/aarch64/illegal-ras-1.d: New.
|
||
* testsuite/gas/aarch64/illegal-ras-1.s: New.
|
||
|
||
2016-04-19 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* testsuite/gas/arc/nps400-6.d: New file.
|
||
* testsuite/gas/arc/nps400-6.s: New file.
|
||
|
||
2016-04-19 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* testsuite/gas/arc/nps400-4.d: New file.
|
||
* testsuite/gas/arc/nps400-4.s: New file.
|
||
* testsuite/gas/arc/nps400-5.d: New file.
|
||
* testsuite/gas/arc/nps400-5.s: New file.
|
||
|
||
2016-04-19 Martin Galvan <martin.galvan@tallertechnologies.com>
|
||
|
||
* doc/as.texinfo (.cfi_remember_state, .cfi_restore_state): Improve
|
||
documentation.
|
||
|
||
2016-04-17 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
Revert prevous change.
|
||
* config/tc-arc.c (arc_option): Make .cpu directive
|
||
case-sensitive again.
|
||
|
||
2016-04-16 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config/tc-arc.c (arc_option): Make .cpu directive
|
||
case-insensitive.
|
||
|
||
2016-04-16 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config/tc-arc.c (arc_option): Allow NPS400 in .cpu directive.
|
||
|
||
2016-04-15 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-mips.c (md_begin): Remove useless assignment.
|
||
|
||
2016-04-15 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
* Makefile.in: Regenerated with automake 1.11.6.
|
||
* aclocal.m4: Likewise.
|
||
* doc/Makefile.in: Likewise.
|
||
|
||
2016-04-15 Alan Modra <amodra@gmail.com>
|
||
|
||
* config/tc-ppc.c (toc_reloc_types): Wrap in #ifdef OBJ_ELF
|
||
|
||
2016-04-14 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-nios2.c (nios2_as_options): Make file static.
|
||
* config/tc-ppc.c (toc_reloc_ypes): Likewise.
|
||
* config/tc-sparc.c (native_op_table): Likewise.
|
||
|
||
2016-04-14 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-m32c.c (M32C_Macros): Remove.
|
||
* config/tc-msp430.c (option_numbers): Likewise.
|
||
|
||
2016-04-14 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* testsuite/gas/arc/nps400-3.d: New file.
|
||
* testsuite/gas/arc/nps400-3.s: New file.
|
||
|
||
2016-04-14 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* testsuite/gas/arc/add_s-err.s: Update target pattern.
|
||
* testsuite/gas/arc/warn.s: Likewise.
|
||
* testsuite/gas/elf/elf.exp: Run test for arc.
|
||
|
||
2016-04-14 Nick Clifton <nickc@redhat.com>
|
||
|
||
PR target/19938
|
||
* testsuite/gas/i386/ilp32/x86-64-unwind.d: Allow for the string
|
||
sections possibly having the SHF_STRINGS flag bit set.
|
||
* testsuite/gas/i386/x86-64-unwind.d: Likewise.
|
||
|
||
2016-04-12 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* config/tc-arc.c (mach_type_specified_p): Change type to
|
||
bfd_boolean.
|
||
(arc_option): Set private flags when parsing cpu pseudo-op.
|
||
(md_parse_option): Set mach_type_specified_p to TRUE.
|
||
|
||
2016-04-13 Nick Clifton <nickc@redhat.com>
|
||
|
||
PR target/19937
|
||
* testsuite/gas/v850/pr19937.s: New test.
|
||
* testsuite/gas/v850/pr19937.d: New test control file.
|
||
* testsuite/gas/v850/basic.exp: Run the new test.
|
||
|
||
2016-04-13 Maciej W. Rozycki <macro@imgtec.com>
|
||
Andrew Bennett <andrew.bennett@imgtec.com>
|
||
|
||
* config/tc-mips.c (relaxed_branch_length): Use the long
|
||
sequence where the target is a weak symbol.
|
||
(relaxed_micromips_32bit_branch_length): Likewise.
|
||
(relaxed_micromips_16bit_branch_length): Likewise.
|
||
* testsuite/gas/mips/branch-weak-1.d: New test.
|
||
* testsuite/gas/mips/branch-weak-2.d: New test.
|
||
* testsuite/gas/mips/branch-weak-3.d: New test.
|
||
* testsuite/gas/mips/branch-weak-4.d: New test.
|
||
* testsuite/gas/mips/branch-weak-5.d: New test.
|
||
* testsuite/gas/mips/branch-weak.l: New stderr output.
|
||
* testsuite/gas/mips/branch-weak.s: New test source.
|
||
* testsuite/gas/mips/mips.exp: Run the new tests.
|
||
|
||
2016-04-13 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (relaxed_branch_length): Use the long
|
||
sequence where the distance cannot be determined.
|
||
(relaxed_micromips_32bit_branch_length): Likewise.
|
||
* testsuite/gas/mips/branch-extern-1.d: New test.
|
||
* testsuite/gas/mips/branch-extern-2.d: New test.
|
||
* testsuite/gas/mips/branch-extern-3.d: New test.
|
||
* testsuite/gas/mips/branch-extern-4.d: New test.
|
||
* testsuite/gas/mips/branch-extern.l: New stderr output.
|
||
* testsuite/gas/mips/branch-extern.s: New test source.
|
||
* testsuite/gas/mips/branch-section-1.d: New test.
|
||
* testsuite/gas/mips/branch-section-2.d: New test.
|
||
* testsuite/gas/mips/branch-section-3.d: New test.
|
||
* testsuite/gas/mips/branch-section-4.d: New test.
|
||
* testsuite/gas/mips/branch-section.l: New stderr output.
|
||
* testsuite/gas/mips/branch-section.s: New test source.
|
||
* testsuite/gas/mips/mips.exp: Run the new tests.
|
||
|
||
2016-04-12 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* testsuite/gas/arc/textauxregister.d: New file.
|
||
* testsuite/gas/arc/textauxregister.s: Likewise.
|
||
* testsuite/gas/arc/textcondcode.d: Likewise.
|
||
* testsuite/gas/arc/textcondcode.s: Likewise.
|
||
* testsuite/gas/arc/textcoreregister.d: Likewise.
|
||
* testsuite/gas/arc/textcoreregister.s: Likewise.
|
||
* testsuite/gas/arc/textpseudoop.d: Likewise.
|
||
* testsuite/gas/arc/textpseudoop.s: Likewise.
|
||
* testsuite/gas/arc/ld2.d: Update test.
|
||
* testsuite/gas/arc/st.d: Likewise.
|
||
* testsuite/gas/arc/taux.d: Likewise.
|
||
* doc/c-arc.texi (ARC Directives): Add .extCondCode,
|
||
.extCoreRegister and .extAuxRegister documentation.
|
||
* config/tc-arc.c (arc_extcorereg): New function.
|
||
(md_pseudo_table): Add .extCondCode, .extCoreRegister and
|
||
.extAuxRegister pseudo-ops.
|
||
(extRegister_t): New type.
|
||
(ext_condcode, arc_aux_hash): New global variable.
|
||
(find_opcode_match): Check for extensions.
|
||
(preprocess_operands): Likewise.
|
||
(md_begin): Add aux registers in a hash.
|
||
(assemble_insn): Update use arc_flags member.
|
||
(tokenize_extregister): New function.
|
||
(create_extcore_section): Likewise.
|
||
* config/tc-arc.h (arc_flags): Delete code, add flgp.
|
||
|
||
2016-04-12 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* testsuite/gas/arc/noargs_a7.d: New file.
|
||
* testsuite/gas/arc/noargs_a7.s: Likewise.
|
||
* testsuite/gas/arc/noargs_hs.d: Likewise.
|
||
* testsuite/gas/arc/noargs_hs.s: Likewise.
|
||
|
||
2016-04-12 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* testsuite/gas/arc/textinsn-errors.d: New File.
|
||
* testsuite/gas/arc/textinsn-errors.err: Likewise.
|
||
* testsuite/gas/arc/textinsn-errors.s: Likewise.
|
||
* testsuite/gas/arc/textinsn2op.d: Likewise.
|
||
* testsuite/gas/arc/textinsn2op.s: Likewise.
|
||
* testsuite/gas/arc/textinsn2op01.d: Likewise.
|
||
* testsuite/gas/arc/textinsn2op01.s: Likewise.
|
||
* testsuite/gas/arc/textinsn3op.d: Likewise.
|
||
* testsuite/gas/arc/textinsn3op.s: Likewise.
|
||
* doc/c-arc.texi (ARC Directives): Add .extInstruction
|
||
documentation.
|
||
* config/tc-arc.c (arcext_section): New variable.
|
||
(arc_extinsn): New function.
|
||
(md_pseudo_table): Add .extInstruction pseudo op.
|
||
(attributes_t): New type.
|
||
(suffixclass, syntaxclass, syntaxclassmod): New constant
|
||
structures.
|
||
(find_opcode_match): Remove arc_num_opcodes.
|
||
(md_begin): Likewise.
|
||
(tokenize_extinsn): New function.
|
||
(arc_set_ext_seg): Likewise.
|
||
(create_extinst_section): Likewise.
|
||
|
||
2016-04-12 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* config/tc-arc.c (preprocess_operands): Mark AUX symbol.
|
||
(arc_adjust_symtab): New function.
|
||
* config/tc-arc.h (ARC_FLAG_AUX): Define.
|
||
(obj_adjust_symtab): Likewise.
|
||
* testsuite/gas/arc/taux.d: New file.
|
||
* testsuite/gas/arc/taux.s: Likewise.
|
||
|
||
2016-04-09 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (s_option): Sanitize `.option picX'
|
||
pseudo-op.
|
||
* testsuite/gas/mips/option-pic-1.d: New test.
|
||
* testsuite/gas/mips/option-pic-2.l: New list test.
|
||
* testsuite/gas/mips/option-pic-1.s: New test source.
|
||
* testsuite/gas/mips/option-pic-2.s: New test source.
|
||
* testsuite/gas/mips/mips.exp: Run the new tests.
|
||
|
||
2016-04-09 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (s_option): Reject `.option picX' if VxWorks
|
||
PIC.
|
||
* testsuite/gas/mips/option-pic-vxworks-1.l: New list test.
|
||
* testsuite/gas/mips/option-pic-vxworks-2.l: New list test.
|
||
* testsuite/gas/mips/option-pic-vxworks-1.s: New test source.
|
||
* testsuite/gas/mips/option-pic-vxworks-2.s: New test source.
|
||
* testsuite/gas/mips/mips.exp: Run the new tests.
|
||
|
||
2016-04-09 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (can_swap_branch_p): Correct call formatting.
|
||
|
||
2016-04-09 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* messages.c (as_bad): Fix a typo in description.
|
||
|
||
2016-04-09 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (mips_check_options): Unify messages.
|
||
|
||
2016-04-09 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (mips_check_options): Use `opts->isa'
|
||
consistently.
|
||
|
||
2016-04-08 Nick Clifton <nickc@redhat.com>
|
||
|
||
PR target/19910
|
||
* testsuite/gas/sparc/pr19910-1.d: Adjust regexps to work with
|
||
COFF and AOUT sparc targets.
|
||
|
||
2016-04-07 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config/tc-arc.h (MAX_FLAG_NAME_LENGTH): Increase to 7.
|
||
* testsuite/gas/arc/nps400-2.d: New file.
|
||
* testsuite/gas/arc/nps400-2.s: New file.
|
||
|
||
2016-04-07 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config/tc-arc.c (struct arc_opcode_hash_entry_iterator): New
|
||
structure.
|
||
(arc_opcode_hash_entry_iterator_init): New function.
|
||
(arc_opcode_hash_entry_iterator_next): New function.
|
||
(find_opcode_match): Iterate over all arc_opcode entries
|
||
referenced by the arc_opcode_hash_entry passed in as a parameter.
|
||
|
||
2016-04-07 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config/tc-arc.c (arc_find_opcode): Now returns
|
||
arc_opcode_hash_entry pointer.
|
||
(find_opcode_match): Update argument type, extract arc_opcode from
|
||
incoming arc_opcode_hash_entry.
|
||
(find_special_case_pseudo): Update return type.
|
||
(find_special_case_flag): Update return type.
|
||
(find_special_case): Update return type.
|
||
(assemble_tokens): Lookup arc_opcode_hash_entry based on
|
||
instruction mnemonic, then use find_opcode_match to identify
|
||
specific arc_opcode.
|
||
|
||
2016-04-07 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config/tc-arc.c (struct arc_opcode_hash_entry): New structure.
|
||
(arc_find_opcode): New function.
|
||
(find_special_case_pseudo): Use arc_find_opcode.
|
||
(find_special_case_flag): Likewise.
|
||
(assemble_tokens): Likewise.
|
||
(md_begin): Build hash using struct arc_opcode_hash_entry.
|
||
|
||
2016-04-07 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* config/tc-arc.c (arc_option): Prepare string for automatic
|
||
translation.
|
||
(declare_register): Likewise.
|
||
|
||
2016-04-06 James Greenhalgh <james.greenhalgh@arm.com>
|
||
|
||
* doc/c-aarch64.texi (Architecture Extensions): Add entry for LSE.
|
||
Correct entry for RDMA. Alpha sort entries.
|
||
|
||
2016-04-07 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config/tc-arc.c (tokenize_flags): Allow greater range of
|
||
characters into flag names.
|
||
|
||
2016-04-07 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config/tc-arc.c (find_opcode_match): Handle O_symbol case, add
|
||
new de_fault label.
|
||
(preprocess_operands): Delete.
|
||
(assemble_tokens): Remove call to preprocess_operands.
|
||
|
||
2016-04-07 Nick Clifton <nickc@redhat.com>
|
||
|
||
PR gas/19910
|
||
* config/tc-sparc.c (sparc_ip): Report an error if the expression
|
||
inside a %-macro could not be fully parsed.
|
||
* expr.c (integer_constant): Accept and ignore U suffixes to
|
||
integers.
|
||
(operand): When a missing closing parenthesis is encountered,
|
||
report the character that was found instead.
|
||
* testsuite/gas/mips/tls-ill.l: Update expected error message.
|
||
* testsuite/gas/sparc/pr19910-1.d: New test driver.
|
||
* testsuite/gas/sparc/pr19910-1.s: New test.
|
||
* testsuite/gas/sparc/pr19910-2.l: Expected error output.
|
||
* testsuite/gas/sparc/pr19910-2.s: New test.
|
||
* testsuite/gas/sparc/sparc.exp: Run the new tests.
|
||
|
||
2016-04-06 Nick Clifton <nickc@redhat.com>
|
||
|
||
* config/tc-msp430.c (msp430_operands): Check for a NOP preceding
|
||
an EINT instruction. Warn/fix as necessary.
|
||
* testsuite/gas/msp430/bad.s: Add test of EINT without preceding NOP.
|
||
* testsuite/gas/msp430/bad.l: Update expected messages.
|
||
|
||
2016-04-05 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* testsuite/gas/arc/nps400-1.d: Update expected results.
|
||
* testsuite/gas/arc/nps400-1.s: Additional test cases.
|
||
|
||
2016-04-05 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* config/tc-arc.c (is_code_density_p): Compare directly the
|
||
subclass field.
|
||
(is_spfp_p, is_dpfp_p, is_spfp_p): Define.
|
||
(check_cpu_feature): New function.
|
||
(find_opcode_match): Use check_cpu_feature function.
|
||
(preprocess_operands): Likewise.
|
||
(md_parse_option): Use mfpuda, mdpfp, mspfp options.
|
||
* testsuite/gas/arc/tdpfp.d: New file.
|
||
* testsuite/gas/arc/tfpuda.d: Likewise.
|
||
* testsuite/gas/arc/tfpx.s: Likewise.
|
||
|
||
2016-04-05 Jiong Wang <jiong.wang@arm.com>
|
||
|
||
* config/tc-arm.c (do_neon_mac_maybe_scalar): Allow F16.
|
||
* testsuite/gas/arm/armv8-2-fp16-simd.s: New tests.
|
||
* testsuite/gas/arm/armv8-2-fp16-simd.d: New expected results.
|
||
* testsuite/gas/arm/armv8-2-fp16-simd-thum.d: Likewise for Thumb.
|
||
* testsuite/gas/arm/armv8-2-fp16-simd-warning.l: New warning results.
|
||
* testsuite/gas/arm/simd_by_scalar_low_regbank.s: New test source.
|
||
* testsuite/gas/arm/simd_by_scalar_low_regbank.d: New testcase.
|
||
* testsuite/gas/arm/simd_by_scalar_low_regbank_thumb.d: Likewise
|
||
for Thumb.
|
||
* testsuite/gas/arm/simd_by_scalar_low_regbank.l: New warning results.
|
||
|
||
2016-04-05 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* config/tc-arc.c (assemble_insn): Prohibit pc-rel relocations for
|
||
JUMP instructions type.
|
||
* testsuite/gas/arc/relocs-errors.d: New file.
|
||
* testsuite/gas/arc/relocs-errors.err: Likewise.
|
||
* testsuite/gas/arc/relocs-errors.s: Likewise.
|
||
|
||
2016-04-04 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
PR gas/19909
|
||
* config/tc-i386.c (check_VecOperands): Try vec_disp8 encoding
|
||
only if i.disp_encoding != disp_encoding_32bit.
|
||
* gas/testsuite/gas/i386/disp32.s: Add tests for vmovdqu64.d32.
|
||
* gas/testsuite/gas/i386/x86-64-disp32.s: Likewise.
|
||
* gas/testsuite/gas/i386/disp32.d: Updated.
|
||
* gas/testsuite/gas/i386/x86-64-disp32.d: Likewise.
|
||
|
||
2016-04-04 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
PR gas/19498
|
||
* testsuite/gas/i386/i386.exp: Run pr19498.
|
||
* testsuite/gas/i386/pr19498.d: New file.
|
||
* testsuite/gas/i386/pr19498.s: Likewise.
|
||
|
||
2016-04-04 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config/tc-arc.h: Include 'opcode/arc.h'.
|
||
(MAX_INSN_ARGS): Delete.
|
||
(MAX_INSN_FLGS): Delete.
|
||
|
||
2016-04-04 Alan Modra <amodra@gmail.com>
|
||
|
||
PR 19498
|
||
* symbols.c (resolve_symbol_value): Clear sy_resolving on exit
|
||
from function on all paths that set sy_resolving.
|
||
|
||
2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* app.c (app_push): use XNEW macro.
|
||
* as.c: Likewise.
|
||
* config/obj-elf.c (obj_elf_change_section): Likewise.
|
||
(elf_copy_symbol_attributes): Likewise.
|
||
(obj_elf_size): Likewise.
|
||
(build_group_lists): Likewise.
|
||
* config/tc-aarch64.c (add_operand_error_record): Likewise.
|
||
(md_assemble): Likewise.
|
||
(tc_gen_reloc): Likewise.
|
||
(get_upper_str): Likewise.
|
||
(aarch64_parse_features): Likewise.
|
||
* config/tc-arm.c (insert_reg_alias): Likewise.
|
||
(insert_neon_reg_alias): Likewise.
|
||
(find_or_make_literal_pool): Likewise.
|
||
(s_arm_elf_cons): Likewise.
|
||
(add_unwind_opcode): Likewise.
|
||
(arm_parse_extension): Likewise.
|
||
* config/tc-avr.c (create_record_for_frag): Likewise.
|
||
* config/tc-crx.c: Likewise.
|
||
* config/tc-d30v.c: Likewise.
|
||
* config/tc-dlx.c (s_proc): Likewise.
|
||
* config/tc-ft32.c: Likewise.
|
||
* config/tc-h8300.c: Likewise.
|
||
* config/tc-hppa.c (pa_proc): Likewise.
|
||
(create_new_space): Likewise.
|
||
(create_new_subspace): Likewise.
|
||
* config/tc-i860.c: Likewise.
|
||
* config/tc-i960.c: Likewise.
|
||
* config/tc-ia64.c: Likewise.
|
||
* config/tc-iq2000.c (iq2000_add_macro): Likewise.
|
||
(iq2000_record_hi16): Likewise.
|
||
* config/tc-m32c.c (m32c_indirect_operand): Likewise.
|
||
* config/tc-m32r.c (debug_sym): Likewise.
|
||
(m32r_record_hi16): Likewise.
|
||
* config/tc-m68k.c (m68k_ip): Likewise.
|
||
(md_begin): Likewise.
|
||
* config/tc-mcore.c: Likewise.
|
||
* config/tc-microblaze.c (check_got): Likewise.
|
||
* config/tc-mips.c (append_insn): Likewise.
|
||
(s_mipsset): Likewise.
|
||
(mips_record_label): Likewise.
|
||
(s_mips_end): Likewise.
|
||
* config/tc-mmix.c (mmix_frob_file): Likewise.
|
||
* config/tc-mn10200.c: Likewise.
|
||
* config/tc-mn10300.c: Likewise.
|
||
* config/tc-moxie.c: Likewise.
|
||
* config/tc-msp430.c: Likewise.
|
||
* config/tc-nds32.c (nds32_elf_save_pseudo_pattern): Likewise.
|
||
* config/tc-ns32k.c: Likewise.
|
||
* config/tc-or1k.c: Likewise.
|
||
* config/tc-pdp11.c: Likewise.
|
||
* config/tc-pj.c (fake_opcode): Likewise.
|
||
* config/tc-ppc.c (ppc_apuinfo_section_add): Likewise.
|
||
(ppc_macro): Likewise.
|
||
(ppc_dwsect): Likewise.
|
||
(ppc_machine): Likewise.
|
||
* config/tc-rl78.c (rl78_frag_init): Likewise.
|
||
* config/tc-rx.c (rx_frag_init): Likewise.
|
||
* config/tc-s390.c (s390_lit_suffix): Likewise.
|
||
(s390_machine): Likewise.
|
||
(s390_machinemode): Likewise.
|
||
* config/tc-score.c (s3_insert_reg): Likewise.
|
||
(s3_gen_reloc): Likewise.
|
||
* config/tc-score7.c (s7_insert_reg): Likewise.
|
||
(s7_gen_reloc): Likewise.
|
||
* config/tc-tic30.c (tic30_operand): Likewise.
|
||
* config/tc-tic4x.c (tic4x_inst_make): Likewise.
|
||
* config/tc-tic54x.c (stag_add_field): Likewise.
|
||
(tic54x_struct): Likewise.
|
||
(tic54x_space): Likewise.
|
||
(tic54x_field): Likewise.
|
||
(tic54x_mlib): Likewise.
|
||
(subsym_substitute): Likewise.
|
||
* config/tc-tic6x.c (tic6x_frob_label): Likewise.
|
||
* config/tc-vax.c: Likewise.
|
||
* config/tc-xc16x.c: Likewise.
|
||
* config/tc-xtensa.c (xtensa_add_insn_label): Likewise.
|
||
(directive_push): Likewise.
|
||
(xtensa_begin_directive): Likewise.
|
||
(tokenize_arguments): Likewise.
|
||
(xtensa_add_literal_sym): Likewise.
|
||
(new_resource_table): Likewise.
|
||
(resize_resource_table): Likewise.
|
||
(emit_single_op): Likewise.
|
||
(xtensa_create_trampoline_frag): Likewise.
|
||
(xtensa_maybe_create_literal_pool_frag): Likewise.
|
||
(xtensa_add_config_info): Likewise.
|
||
(xtensa_realloc_fixup_cache): Likewise.
|
||
(add_subseg_info): Likewise.
|
||
(cache_literal_section): Likewise.
|
||
(add_xt_block_frags): Likewise.
|
||
(add_xt_prop_frags): Likewise.
|
||
(init_op_placement_info_table): Likewise.
|
||
(build_section_rename): Likewise.
|
||
* config/tc-z80.c: Likewise.
|
||
* config/tc-z8k.c: Likewise.
|
||
* depend.c (register_dependency): Likewise.
|
||
* dwarf2dbg.c (get_line_subseg): Likewise.
|
||
(dwarf2_gen_line_info_1): Likewise.
|
||
(get_filenum): Likewise.
|
||
* ecoff.c (allocate_scope): Likewise.
|
||
(allocate_vlinks): Likewise.
|
||
(allocate_shash): Likewise.
|
||
(allocate_thash): Likewise.
|
||
(allocate_tag): Likewise.
|
||
(allocate_forward): Likewise.
|
||
(allocate_thead): Likewise.
|
||
(allocate_lineno_list): Likewise.
|
||
* expr.c (make_expr_symbol): Likewise.
|
||
* hash.c (hash_new_sized): Likewise.
|
||
* input-file.c (input_file_push): Likewise.
|
||
* listing.c (file_info): Likewise.
|
||
(listing_newline): Likewise.
|
||
* macro.c (new_formal): Likewise.
|
||
(define_macro): Likewise.
|
||
* remap.c (add_debug_prefix_map): Likewise.
|
||
* symbols.c (symbol_find_noref): Likewise.
|
||
(define_dollar_label): Likewise.
|
||
(fb_label_instance_inc): Likewise.
|
||
(symbol_relc_make_value): Likewise.
|
||
|
||
2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/obj-elf.c (obj_elf_vendor_attribute): Use xstrdup.
|
||
* config/tc-ppc.c (ppc_frob_file_before_adjust): Likewise.
|
||
(ppc_znop): Likewise.
|
||
(ppc_pe_section): Likewise.
|
||
(ppc_frob_symbol): Likewise.
|
||
* config/tc-tic30.c (tic30_operand): Likewise.
|
||
* config/tc-tic4x.c (tic4x_sect): Likewise.
|
||
(tic4x_usect): Likewise.
|
||
|
||
2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-alpha.c: Const qualify FLT_CHARS.
|
||
* config/atof-ieee.c: Remove declarations of FLT_CHARS and EXP_CHARS.
|
||
* config/tc-cris.h: Likewise.
|
||
* expr.c: Likewise.
|
||
* config/tc-mmix.c (md_atof): Adjust comment.
|
||
* config/tc-mmix.h: Stop defining FLT_CHARS and EXP_CHARS as macros.
|
||
* tc.h: Declare FLT_CHARS and EXP_CHARS.
|
||
|
||
2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-score.c (s3_gen_reloc): Add const qualifiers.
|
||
* config/tc-score7.c (s7_gen_reloc): Likewise.
|
||
|
||
2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-arm.c (do_t_branch): Change the type of reloc to
|
||
bfd_reloc_code_real_type.
|
||
|
||
2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/bfin-parse.y (current_inputline): Remove definition.
|
||
* config/tc-bfin.c (md_assemble): Simplify use of current_inputline.
|
||
|
||
2016-04-03 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-avr.c (md_parse_option): Use strcasecmp () to compare
|
||
strings.
|
||
|
||
2016-04-02 Alan Modra <amodra@gmail.com>
|
||
|
||
PR 19896
|
||
* read.c (assign_symbol): Consume rest of line after an error
|
||
rather than continuing to process the line.
|
||
|
||
2016-04-01 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config/tc-arc.h (MAX_FLAG_NAME_LENGHT): Rename to...
|
||
(MAX_FLAG_NAME_LENGTH): ...this.
|
||
(struct arc_flags): Update to use MAX_FLAG_NAME_LENGTH.
|
||
* config/tc-arc.c (tokenize_flags): Likewise.
|
||
|
||
2016-04-01 Alan Modra <amodra@gmail.com>
|
||
|
||
* cgen.c (weak_operand_overflow_check): Return const char*.
|
||
* messages.c (as_internal_value_out_of_range): Formatting.
|
||
(as_warn_value_out_of_range): Consify prefix param.
|
||
(as_bad_value_out_of_range): Likewise.
|
||
* read.c (s_errwarn): Constify msg..
|
||
(s_float_space, float_cons): ..and err.
|
||
* as.h (as_warn_value_out_of_range, as_bad_value_out_of_range,
|
||
ieee_md_atof, vax_md_atof): Update prototypes.
|
||
* tc.h (md_atof): Update prototype.
|
||
* config/atof-ieee.c (ieee_md_atof): Return const char*.
|
||
* config/atof-vax.c (vax_md_atof): Likewise.
|
||
* config/obj-elf.c (obj_elf_parse_section_letters): Constify bad_msg.
|
||
* config/tc-aarch64.c (md_atof): Return const char*.
|
||
* config/tc-alpha.c (s_alpha_section_name): Likewise.
|
||
(s_alpha_comm): Constify sec_name.
|
||
(section_name): Constify.
|
||
(s_alpha_section): Consify name..
|
||
(alpha_elf_section_letter): ..and ptr_msg param..
|
||
(md_atof): ..and return.
|
||
* config/tc-alpha.h (alpha_elf_section_letter): Update prototype.
|
||
* config/tc-arc.c (md_atof): Return const char*.
|
||
* config/tc-arm.c (md_atof): Likewise.
|
||
* config/tc-avr.c (md_atof): Likewise.
|
||
* config/tc-bfin.c (md_atof): Likewise.
|
||
* config/tc-cr16.c (md_atof): Likewise.
|
||
* config/tc-cris.c (md_atof): Likewise.
|
||
* config/tc-crx.c (md_atof): Likewise.
|
||
* config/tc-d10v.c (md_atof): Likewise.
|
||
* config/tc-d30v.c (md_atof): Likewise.
|
||
* config/tc-dlx.c (md_atof): Likewise.
|
||
* config/tc-epiphany.c (md_atof): Likewise.
|
||
* config/tc-fr30.c (md_atof): Likewise.
|
||
* config/tc-frv.c (md_atof): Likewise.
|
||
* config/tc-ft32.c (md_atof): Likewise.
|
||
* config/tc-h8300.c (md_atof): Likewise.
|
||
* config/tc-hppa.c (struct default_subspace_dict): Constify name.
|
||
(struct default_space_dict): Likewise.
|
||
(create_new_space): Constify name param.
|
||
(create_new_subspace): Likewise.
|
||
(is_defined_space, is_defined_subspace): Likewise.
|
||
(pa_parse_space_stmt): Constify space_name param.
|
||
(md_atof): Return const char*.
|
||
(pa_spaces_begin): Constify name.
|
||
* config/tc-i370.c (md_atof): Return const char*.
|
||
* config/tc-i386.c (md_atof): Likewise.
|
||
(x86_64_section_letter): Constify ptr_msg param.
|
||
* config/tc-i386.h (x86_64_section_letter): Update prototype.
|
||
* config/tc-i860.c (struct i860_it): Constify error.
|
||
(md_atof): Return const char*.
|
||
* config/tc-i960.c (md_atof): Likewise.
|
||
* config/tc-ia64.c (md_atof): Likewise.
|
||
(ia64_elf_section_letter): Constify ptr_msg param.
|
||
* config/tc-ia64.h (ia64_elf_section_letter): Update prototype.
|
||
* config/tc-ip2k.c (md_atof): Return const char*.
|
||
* config/tc-iq2000.c (md_atof): Likewise.
|
||
* config/tc-lm32.c (md_atof): Likewise.
|
||
* config/tc-m32c.c (md_atof): Likewise.
|
||
* config/tc-m32r.c (md_atof): Likewise.
|
||
* config/tc-m68hc11.c (md_atof): Likewise.
|
||
* config/tc-m68k.c (md_atof): Likewise.
|
||
* config/tc-mcore.c (md_atof): Likewise.
|
||
* config/tc-mep.c (md_atof): Likewise.
|
||
(mep_elf_section_letter): Constify ptr_msg param.
|
||
* config/tc-mep.h (mep_elf_section_letter): Update prototype.
|
||
* config/tc-metag.c (md_atof): Return const char*.
|
||
* config/tc-microblaze.c (md_atof): Likewise.
|
||
* config/tc-microblaze.h (md_atof): Delete prototype.
|
||
* config/tc-mips.c (mips_parse_argument_token): Constify err.
|
||
(md_atof): Return const char*.
|
||
* config/tc-mmix.c (md_atof): Likewise.
|
||
* config/tc-mn10200.c (md_atof): Likewise.
|
||
* config/tc-mn10300.c (md_atof): Likewise.
|
||
* config/tc-moxie.c (md_atof): Likewise.
|
||
* config/tc-msp430.c (md_atof): Likewise.
|
||
* config/tc-mt.c (md_atof): Likewise.
|
||
* config/tc-nds32.c (md_atof): Likewise.
|
||
* config/tc-nios2.c (md_atof): Likewise.
|
||
(nios2_elf_section_letter): Constify ptr_msg param.
|
||
* config/tc-nios2.h (nios2_elf_section_letter): Update prototype.
|
||
* config/tc-ns32k.c (md_atof): Return const char*.
|
||
* config/tc-or1k.c (md_atof): Likewise.
|
||
* config/tc-pdp11.c (struct pdp11_code): Constify error.
|
||
(md_atof): Return const char*.
|
||
* config/tc-pj.c (md_atof): Likewise.
|
||
* config/tc-ppc.c (md_atof): Likewise.
|
||
* config/tc-rl78.c (md_atof): Likewise.
|
||
* config/tc-rx.c (md_atof): Likewise.
|
||
* config/tc-s390.c (md_atof): Likewise.
|
||
* config/tc-score.c (s3_atof, md_atof): Likewise.
|
||
* config/tc-sh.c (md_atof): Likewise.
|
||
* config/tc-sparc.c (struct sparc_it): Constify error.
|
||
(md_atof): Return const char*.
|
||
* config/tc-spu.c (md_atof): Likewise.
|
||
* config/tc-tic30.c (md_atof): Likewise.
|
||
* config/tc-tic4x.c (md_atof): Likewise.
|
||
* config/tc-tic54x.c (md_atof): Likewise.
|
||
* config/tc-tic6x.c (md_atof): Likewise.
|
||
* config/tc-tilegx.c (md_atof): Likewise.
|
||
* config/tc-tilepro.c (md_atof): Likewise.
|
||
* config/tc-v850.c (parse_register_list, md_atof): Likewise.
|
||
* config/tc-vax.c (md_atof): Likewise.
|
||
* config/tc-visium.c (md_atof): Likewise.
|
||
* config/tc-xc16x.c (md_atof): Likewise.
|
||
* config/tc-xgate.c (md_atof): Likewise.
|
||
* config/tc-xstormy16.c (md_atof): Likewise.
|
||
* config/tc-xtensa.c (md_atof): Likewise.
|
||
* config/tc-z80.c (md_atof): Likewise.
|
||
* config/tc-z8k.c (md_atof): Likewise.
|
||
|
||
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-xtensa.c (struct rename_section_struct): Make old_name
|
||
const.
|
||
(xtensa_section_rename): Make argument type const char *.
|
||
* config/tc-xtensa.h (xtensa_section_rename): Adjust.
|
||
|
||
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-i960.c (parse_ldconst): Cast to char * when assigning to
|
||
args[0].
|
||
|
||
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-m32c.c (m32c_md_end): cast the argument to md_assemble to
|
||
char *.
|
||
(m32c_indirect_operand): Likewise.
|
||
* config/tc-nds32.c (do_pseudo_b): Likewise.
|
||
(do_pseudo_bal): Likewise.
|
||
(do_pseudo_ls_bhw): Likewise.
|
||
|
||
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* as.c (parse_args): Cast literal to char * when assigning to optarg.
|
||
|
||
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-ia64.c (md_assemble): Add temporary variable to pass to
|
||
get_symbol_name ().
|
||
* config/tc-sparc.c (s_register): Cast a literal to char * in
|
||
assignment.
|
||
|
||
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-i960.c (parse_expr): Cast to char * when assigning to
|
||
input_line_pointer.
|
||
* config/tc-m32r.c (expand_debug_syms): Likewise.
|
||
* config/tc-msp430.c (msp430_dstoperand): Likewise.
|
||
* config/tc-z80.c (md_begin): Likewise.
|
||
* stabs.c (stabs_generate_asm_func): Likewise.
|
||
|
||
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* cgen.c: Modernize the way functions declare arguments.
|
||
* config/tc-bfin.c: Likewise.
|
||
* config/tc-pdp11.c: Likewise.
|
||
* literal.c: Likewise.
|
||
* read.c: Likewise.
|
||
* stabs.c: Likewise.
|
||
|
||
2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-aarch64.c (aarch64_handle_align): Make the type of some
|
||
variables unsigned char[].
|
||
* config/tc-alpha.c (alpha_handle_align): Likewise.
|
||
* config/tc-arm.c (arm_handle_align): Likewise.
|
||
* config/tc-z80.c: Likewise.
|
||
|
||
2016-03-30 Nick Clifton <nickc@redhat.com>
|
||
|
||
PR target/19880
|
||
* config/tc-arm.c (do_t_push_pop): Cast bitmask to unsigned before
|
||
shifting.
|
||
|
||
2016-03-30 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* testsuite/gas/all/gas.exp: Don't xfail on ARC.
|
||
* testsuite/gas/elf/elf.exp: Likewise.
|
||
* testsuite/gas/all/redef3.d: Allow execution for ARC.
|
||
|
||
2016-03-30 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* testsuite/gas/arc/warn.exp: Fix matching pattern.
|
||
|
||
2016-03-29 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* testsuite/gas/arc/ext2op.d: New file.
|
||
* testsuite/gas/arc/ext2op.s: Likewise.
|
||
* testsuite/gas/arc/ext3op.d: Likewise.
|
||
* testsuite/gas/arc/ext3op.s: Likewise.
|
||
|
||
2016-03-29 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-aarch64.c (struct aarch64_long_option_table): Ad const
|
||
qualifier.
|
||
* config/tc-alpha.c (md_parse_option): Likewise.
|
||
* config/tc-arc.c (md_parse_option): Likewise.
|
||
* config/tc-arm.c (struct arm_long_option_table): Likewise.
|
||
(md_parse_option): Likewise.
|
||
* config/tc-avr.c (md_parse_option): Likewise.
|
||
* config/tc-bfin.c (md_parse_option): Likewise.
|
||
* config/tc-cr16.c (md_parse_option): Likewise.
|
||
* config/tc-cris.c (s_cris_arch): Likewise.
|
||
(md_parse_option): Likewise.
|
||
* config/tc-crx.c (md_parse_option): Likewise.
|
||
* config/tc-d10v.c (md_parse_option): Likewise.
|
||
* config/tc-d30v.c (md_parse_option): Likewise.
|
||
* config/tc-dlx.c (md_parse_option): Likewise.
|
||
* config/tc-epiphany.c (md_parse_option): Likewise.
|
||
* config/tc-fr30.c (md_parse_option): Likewise.
|
||
* config/tc-frv.c (md_parse_option): Likewise.
|
||
* config/tc-ft32.c (md_parse_option): Likewise.
|
||
* config/tc-h8300.c (md_parse_option): Likewise.
|
||
* config/tc-hppa.c (md_parse_option): Likewise.
|
||
* config/tc-i370.c (md_parse_option): Likewise.
|
||
* config/tc-i386.c (md_parse_option): Likewise.
|
||
* config/tc-i860.c (md_parse_option): Likewise.
|
||
* config/tc-i960.c (md_parse_option): Likewise.
|
||
* config/tc-ia64.c (md_parse_option): Likewise.
|
||
* config/tc-ip2k.c (md_parse_option): Likewise.
|
||
* config/tc-iq2000.c (md_parse_option): Likewise.
|
||
* config/tc-lm32.c (md_parse_option): Likewise.
|
||
* config/tc-m32c.c (md_parse_option): Likewise.
|
||
* config/tc-m32r.c (md_parse_option): Likewise.
|
||
* config/tc-m68hc11.c (md_parse_option): Likewise.
|
||
* config/tc-m68k.c (md_parse_option): Likewise.
|
||
* config/tc-mcore.c (md_parse_option): Likewise.
|
||
* config/tc-mep.c (md_parse_option): Likewise.
|
||
* config/tc-metag.c (struct metag_long_option): Likewise.
|
||
(md_parse_option): Likewise.
|
||
* config/tc-microblaze.c (md_parse_option): Likewise.
|
||
* config/tc-microblaze.h (md_parse_option): Remove prototype.
|
||
* config/tc-mips.c (md_parse_option): Adjust.
|
||
* config/tc-mmix.c (md_parse_option): Likewise.
|
||
* config/tc-mn10200.c (md_parse_option): Likewise.
|
||
* config/tc-mn10300.c (md_parse_option): Likewise.
|
||
* config/tc-moxie.c (md_parse_option): Likewise.
|
||
* config/tc-msp430.c (md_parse_option): Likewise.
|
||
* config/tc-mt.c (md_parse_option): Likewise.
|
||
* config/tc-nds32.c (md_parse_option): Likewise.
|
||
* config/tc-nds32.h (nds32_parse_option): Likewise.
|
||
* config/tc-nios2.c (md_parse_option): Likewise.
|
||
* config/tc-ns32k.c (md_parse_option): Likewise.
|
||
* config/tc-or1k.c (md_parse_option): Likewise.
|
||
* config/tc-pdp11.c (md_parse_option): Likewise.
|
||
* config/tc-pj.c (md_parse_option): Likewise.
|
||
* config/tc-ppc.c (md_parse_option): Likewise.
|
||
* config/tc-rl78.c (md_parse_option): Likewise.
|
||
* config/tc-rx.c (md_parse_option): Likewise.
|
||
* config/tc-s390.c (s390_parse_cpu): Likewise.
|
||
* config/tc-score.c (md_parse_option): Likewise.
|
||
* config/tc-sh.c (md_parse_option): Likewise.
|
||
* config/tc-sparc.c (md_parse_option): Likewise.
|
||
* config/tc-spu.c (md_parse_option): Likewise.
|
||
* config/tc-tic30.c (md_parse_option): Likewise.
|
||
* config/tc-tic4x.c (md_parse_option): Likewise.
|
||
* config/tc-tic54x.c (md_parse_option): Likewise.
|
||
* config/tc-tic6x.c (md_parse_option): Likewise.
|
||
* config/tc-tilegx.c (md_parse_option): Likewise.
|
||
* config/tc-tilepro.c (md_parse_option): Likewise.
|
||
* config/tc-v850.c (md_parse_option): Likewise.
|
||
* config/tc-vax.c (md_parse_option): Likewise.
|
||
* config/tc-visium.c (struct visium_long_option_table): Likewise.
|
||
* config/tc-xc16x.c (md_parse_option): Likewise.
|
||
* config/tc-xgate.c (md_parse_option): Likewise.
|
||
* config/tc-xstormy16.c (md_parse_option): Likewise.
|
||
* config/tc-xtensa.c (md_parse_option): Likewise.
|
||
* config/tc-z80.c (md_parse_option): Likewise.
|
||
* config/tc-z8k.c (md_parse_option): Likewise.
|
||
* tc.h (md_parse_option): Likewise.
|
||
|
||
2016-03-29 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-bfin.c (gencode): Use XOBNEW obstack_alloc () wrapper.
|
||
* config/tc-hppa.c (fix_new_hppa): Likewise.
|
||
(pa_vtable_entry): Likewise.
|
||
(pa_vtable_inherit): Likewise.
|
||
* config/tc-m68k.c (md_begin): Likewise.
|
||
|
||
2016-03-28 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/obj-elf.c (obj_elf_section_name): Return const char *.
|
||
* config/obj-elf.h (obj_elf_section_name): Adjust.
|
||
* config/tc-aarch64.c (aarch64_parse_features): Likewise.
|
||
(aarch64_parse_cpu): Likewise.
|
||
(aarch64_parse_arch): Likewise.
|
||
* config/tc-arm.c (arm_parse_extension): Likewise.
|
||
(arm_parse_cpu): Likewise.
|
||
(arm_parse_arch): Likewise.
|
||
* config/tc-nds32.c: Likewise.
|
||
* config/xtensa-relax.c (parse_special_fn): Likewise.
|
||
* stabs.c (generate_asm_file): Likewise.
|
||
|
||
2016-03-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-cr16.c (cr16_assemble): New function.
|
||
(md_assemble): Call cr16_assemble.
|
||
|
||
2016-03-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* as.c (parse_args): Adjust.
|
||
* as.h (flag_size_check): Rename to flag_allow_nonconst_size.
|
||
* config/obj-elf.c (elf_frob_symbol): Adjust.
|
||
|
||
2016-03-24 Jose E. Marchesi <jose.marchesi@oracle.com>
|
||
|
||
* config/tc-sparc.c (sparc_ip): Remove the V9 restriction on ASR
|
||
registers to be in the 16..31 range.
|
||
|
||
2016-03-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-microblaze.c (md_assemble): Cast opc to char * when calling
|
||
frag_var ().
|
||
|
||
2016-03-24 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-visium.c (md_atof): Localize the string returned on
|
||
failure.
|
||
|
||
2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-h8300.c (h8300_elf_section): Add const qualifiers.
|
||
* config/tc-ia64.c (obj_elf_vms_common): Likewise.
|
||
* config/tc-m68hc11.c (md_begin): Likewise.
|
||
(print_opcode_list): Likewise.
|
||
* config/tc-msp430.c (msp430_section): Likewise.
|
||
* config/tc-score.c (struct s3_insn_to_dependency): Likewise.
|
||
(s3_build_dependency_insn_hsh): Likewise.
|
||
* config/tc-score7.c (struct s7_insn_to_dependency): Likewise.
|
||
(s7_build_dependency_insn_hsh): Likewise.
|
||
* config/tc-tic4x.c: Likewise.
|
||
* config/tc-tic54x.c (tic54x_set_default_include): Likewise.
|
||
(subsym_get_arg): Likewise.
|
||
* config/tc-xtensa.c (struct suffix_reloc_map): Likewise.
|
||
(get_directive): Likewise.
|
||
(cache_literal_section): Likewise.
|
||
* config/xtensa-relax.c: Likewise.
|
||
* symbols.c (symbol_create): Likewise.
|
||
(local_symbol_make): Likewise.
|
||
(symbol_relc_make_expr): Likewise.
|
||
|
||
2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-pdp11.c (md_assemble): Remove useless if and assignment to
|
||
str.
|
||
|
||
2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-sparc.c (sparc_regname_to_dw2regnum): Replace strchr ()
|
||
call with a switch.
|
||
|
||
2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-ia64.c (ia64_do_align): Remove.
|
||
(ia64_cons_align): Call do_align () directly.
|
||
(dot_proc): Likewise.
|
||
(stmt_float_cons): Likewise.
|
||
|
||
2016-03-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* listing.c (listing_message): Use XNEW style allocation macros.
|
||
* read.c (read_a_source_file): Likewise.
|
||
(read_symbol_name): Likewise.
|
||
(s_mri_common): Likewise.
|
||
(assign_symbol): Likewise.
|
||
(s_reloc): Likewise.
|
||
(emit_expr_with_reloc): Likewise.
|
||
(s_incbin): Likewise.
|
||
(s_include): Likewise.
|
||
* sb.c (sb_build): Likewise.
|
||
(sb_check): Likewise.
|
||
|
||
2016-03-22 Alan Modra <amodra@gmail.com>
|
||
|
||
* write.c (record_alignment): Revert 2016-02-18 change.
|
||
|
||
2016-03-22 Alan Modra <amodra@gmail.com>
|
||
|
||
* config/tc-alpha.c (load_expression): Replace alloca with xmalloc.
|
||
(emit_jsrjmp, tc_gen_reloc): Likewise.
|
||
* config/tc-i370.c (i370_macro): Likewise.
|
||
|
||
2016-03-22 Nick Clifton <nickc@redhat.com>
|
||
|
||
* configure: Regenerate.
|
||
|
||
2016-03-21 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* testsuite/gas/arc/nps400-0.d: New file.
|
||
* testsuite/gas/arc/nps400-0.s: New file.
|
||
* testsuite/gas/arc/nps400-1.d: New file.
|
||
* testsuite/gas/arc/nps400-1.s: New file.
|
||
|
||
2016-03-21 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config/tc-arc.c (find_opcode_match): Move lnflg, and i
|
||
declarations to start of block. Reset code on all flags before
|
||
attempting to match them. Handle multiple hits on the same flag.
|
||
Handle flag class.
|
||
* testsuite/gas/arc/asm-errors.d: New file.
|
||
* testsuite/gas/arc/asm-errors.err: New file.
|
||
* testsuite/gas/arc/asm-errors.s: New file.
|
||
|
||
2016-03-21 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config/tc-arc.c (cpu_types): Add nps400 entry.
|
||
(check_zol): Handle nps400.
|
||
|
||
2016-03-21 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config/tc-arc.c (arc_select_cpu): Remove use of
|
||
EF_ARC_CPU_GENERIC.
|
||
|
||
2016-03-21 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* config/tc-arc.c (arc_target): Delay initialisation until
|
||
arc_select_cpu.
|
||
(arc_target_name): Likewise.
|
||
(arc_features): Likewise.
|
||
(arc_mach_type): Likewise.
|
||
(cpu_types): Remove "all" entry.
|
||
(arc_select_cpu): New function, most of the content is from...
|
||
(md_parse_option): ... here. Call new arc_select_cpu.
|
||
(md_begin): Call arc_select_cpu if needed, default is now arc700.
|
||
|
||
2016-03-21 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* testsuite/gas/arc/inline-data-1.d: Add target restriction.
|
||
* testsuite/gas/arc/inline-data-2.d: New file.
|
||
|
||
2016-03-21 Nick Clifton <nickc@redhat.com>
|
||
|
||
* atof-generic.c: Replace use of alloca with call to xmalloc.
|
||
* cgen.c: Likewise.
|
||
* dwarf2dbg.c: Likewise.
|
||
* macro.c: Likewise.
|
||
* remap.c: Likewise.
|
||
* stabs.c: Likewise.
|
||
* symbols.c: Likewise.
|
||
* config/obj-elf.c: Likewise.
|
||
* config/tc-aarch64.c: Likewise.
|
||
* config/tc-arc.c: Likewise.
|
||
* config/tc-arm.c: Likewise.
|
||
* config/tc-avr.c: Likewise.
|
||
* config/tc-ia64.c: Likewise.
|
||
* config/tc-mips.c: Likewise.
|
||
* config/tc-msp430.c: Likewise.
|
||
* config/tc-nds32.c: Likewise.
|
||
* config/tc-ppc.c: Likewise.
|
||
* config/tc-sh.c: Likewise.
|
||
* config/tc-tic30.c: Likewise.
|
||
* config/tc-tic54x.c: Likewise.
|
||
* config/tc-xstormy16.c: Likewise.
|
||
* config/te-vms.c: Likewise.
|
||
* configure: Regenerate.
|
||
|
||
2016-03-20 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* tc-i386.c (f32_1): Change type to unsigned char[].
|
||
(f32_2): Likewise.
|
||
(f32_3): Likewise.
|
||
(f32_4): Likewise.
|
||
(f32_5): Likewise.
|
||
(f32_6): Likewise.
|
||
(f32_7): Likewise.
|
||
(f32_8): Likewise.
|
||
(f32_9): Likewise.
|
||
(f32_10): Likewise.
|
||
(f32_11): Likewise.
|
||
(f32_12): Likewise.
|
||
(f32_13): Likewise.
|
||
(f32_14): Likewise.
|
||
(f16_3): Likewise.
|
||
(f16_4): Likewise.
|
||
(f16_5): Likewise.
|
||
(f16_6): Likewise.
|
||
(f16_7): Likewise.
|
||
(f16_8): Likewise.
|
||
(jump_31): Likewise.
|
||
(f32_patt): Likewise.
|
||
(f16_patt): Likewise.
|
||
(alt_3): Likewise.
|
||
(alt_4): Likewise.
|
||
(alt_5): Likewise.
|
||
(alt_6): Likewise.
|
||
(alt_7): Likewise.
|
||
(alt_8): Likewise.
|
||
(alt_9): Likewise.
|
||
(alt_10): Likewise.
|
||
(alt_patt): Likewise.
|
||
|
||
2016-03-18 Nick Clifton <nickc@redhat.com>
|
||
|
||
* doc/c-aarch64.texi (AArch64 Directives): Add descriptions of
|
||
.cpu, .dword, .even, .inst. .tlsdescadd, .tlsdesccall,
|
||
.tlsdescldr and .xword directives.
|
||
|
||
PR target/19721
|
||
* testsuite/gas/aarch64/pr19721.s: New test source file.
|
||
* testsuite/gas/aarch64/pr19721.d: New test driver file.
|
||
|
||
* doc/as.texinfo: Place the target specific command line options
|
||
into their own man page section.
|
||
|
||
2016-03-16 Jiong Wang <jiong.wang@arm.com>
|
||
|
||
* config/tc-arm.c (N_S_32): New.
|
||
(N_F_16_32): Likewise.
|
||
(N_SUF_32): Support N_F16.
|
||
(N_IF_32): Likewise.
|
||
(neon_dyadic_misc): Likewise.
|
||
(do_neon_cmp): Likewise.
|
||
(do_neon_cmp_inv): Likewise.
|
||
(do_neon_mul): Likewise.
|
||
(do_neon_fcmp_absolute): Likewise.
|
||
(do_neon_step): Likewise.
|
||
(do_neon_abs_neg): Likewise.
|
||
(CVT_FLAVOR_VAR): Likewise.
|
||
(do_neon_cvt_1): Likewise.
|
||
(do_neon_recip_est): Likewise.
|
||
(do_vmaxnm): Likewise.
|
||
(do_vrint_1): Likewise.
|
||
(neon_check_type): Check architecture support for FP16 extension.
|
||
(insns): Update comments.
|
||
* testsuite/gas/arm/armv8-2-fp16-simd.s: New test source.
|
||
* testsuite/gas/arm/armv8-2-fp16-simd.d: New testcase for arm mode.
|
||
* testsuite/gas/arm/armv8-2-fp16-simd-thumb.d: Likewise for thumb mode.
|
||
* testsuite/gas/arm/armv8-2-fp16-simd-warning.d: New rejection test for
|
||
arm mode.
|
||
* testsuite/gas/arm/armv8-2-fp16-simd-warning-thumb.d: Likewise for
|
||
thumb mode.
|
||
* testsuite/gas/arm/armv8-2-fp16-simd-warning.l: New expected rejection
|
||
error file.
|
||
|
||
2016-03-16 Nick Clifton <nickc@redhat.com>
|
||
|
||
* read.c (emit_expr_with_reloc): Add code check a bignum with
|
||
nbytes == 1.
|
||
* config/rx/rx-parse.y (rx_intop): Accept bignum values for sizes
|
||
other than 32-bits.
|
||
* testsuite/gas/elf/bignum.s: New test source file.
|
||
* testsuite/gas/elf/bignum.d: New test driver file.
|
||
* testsuite/gas/elf/elf.exp: Run the new test.
|
||
|
||
2016-03-15 Ulrich Drepper <drepper@gmail.com>
|
||
|
||
* doc/c-i386.texi (Register Naming): Update to details of the
|
||
latest architecture version.
|
||
|
||
2016-03-10 Mickael Guene <mickael.guene@st.com>
|
||
|
||
PR gas/19744
|
||
* config/tc-arm.c (do_arit): Protect against bad relocations usage.
|
||
(do_mov): Likewise.
|
||
(do_t_add_sub): Allow pcrop relocations for Thumb-2 targets.
|
||
(do_t_mov_cmp): Likewise.
|
||
(do_t_add_sub): Protect against bad relocations usage.
|
||
(do_t_mov_cmp): Likewise.
|
||
* testsuite/gas/arm/adds-thumb1-reloc-local-armv7-m.s: New.
|
||
* testsuite/gas/arm/adds-thumb1-reloc-local-armv7-m.d: New.
|
||
* testsuite/gas/arm/movs-thumb1-reloc-local-armv7-m.s: New.
|
||
* testsuite/gas/arm/movs-thumb1-reloc-local-armv7-m.d: New.
|
||
|
||
2016-03-09 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-arm.c (neon_alignment_bit): Rename do_align to
|
||
do_alignment.
|
||
(do_neon_ld_st_lane): Likewise.
|
||
(do_neon_ld_dup): Likewise.
|
||
|
||
2016-03-08 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* testsuite/gas/arc/inline-data-1.d: New file.
|
||
* testsuite/gas/arc/inline-data-1.s: New file.
|
||
|
||
2016-03-07 Andre Vieira <andre.simoesdiasvieira@arm.com>
|
||
|
||
* config/tc-arm.c (arm_cpus): Add cortex-r8.
|
||
* doc/c-arm.texi: Add cortex-r8.
|
||
|
||
2016-03-07 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* config/tc-arc.c: Add const qualifiers.
|
||
* config/tc-h8300.c (md_begin): Likewise.
|
||
* config/tc-ia64.c (print_prmask): Likewise.
|
||
* config/tc-msp430.c (msp430_operands): Likewise.
|
||
* config/tc-nds32.c (struct suffix_name): Likewise.
|
||
(struct nds32_parse_option_table): Likewise.
|
||
(struct nds32_set_option_table): Likewise.
|
||
(do_pseudo_pushpopm): Likewise.
|
||
(do_pseudo_pushpop_stack): Likewise.
|
||
(nds32_relax_relocs): Likewise.
|
||
(nds32_flag): Likewise.
|
||
(struct nds32_hint_map): Likewise.
|
||
(nds32_find_reloc_table): Likewise.
|
||
(nds32_match_hint_insn): Likewise.
|
||
* config/tc-s390.c: Likewise.
|
||
* config/tc-sh.c (get_specific): Likewise.
|
||
* config/tc-tic30.c: Likewise.
|
||
* config/tc-tic4x.c (tic4x_inst_add): Likewise.
|
||
(tic4x_indirect_parse): Likewise.
|
||
* config/tc-vax.c (vax_cons): Likewise.
|
||
* config/tc-z80.c (struct reg_entry): Likewise.
|
||
* config/tc-epiphany.c (md_assemble): Adjust.
|
||
(epiphany_assemble): New function.
|
||
(epiphany_elf_section_rtn): Call do_align directly.
|
||
(epiphany_elf_section_text): Likewise.
|
||
* config/tc-ip2k.c (ip2k_elf_section_rtn): Likewise.
|
||
(ip2k_elf_section_text): Likewise.
|
||
* read.c (do_align): Make it not static.
|
||
* read.h (do_align): New prototype.
|
||
|
||
2016-03-04 Matthew Wahab <matthew.wahab@arm.com>
|
||
|
||
* config/tc-arm.c (aeabi_set_public_attributes): Emit attribute
|
||
for ARMv8.1 AdvSIMD use.
|
||
* testsuite/gas/arm/attr-march-armv8-a+rdma.d: New.
|
||
* testsuite/gas/arm/attr-march-armv8_1-a+simd.d: New.
|
||
|
||
2016-03-04 Matthew Wahab <matthew.wahab@arm.com>
|
||
|
||
* config/gas/tc-arm.c (fpu_neon_ext_v8_1): Restrict to the ARMv8.1 RDMA
|
||
feature.
|
||
(record_feature_use): New.
|
||
(mark_feature_used): Use record_feature_use.
|
||
(do_neon_qrdmlah): New.
|
||
(insns): Use do_neon_qrdmlah for vqrdmlah and vqrdmlsh and
|
||
variants.
|
||
(arm_extensions): Put into alphabetical order. Re-indent "simd"
|
||
and "rdma" entries. Fix the incorrect merge value for "+rdma".
|
||
* testsuite/gas/arm/armv8-a+rdma-warning.d: New.
|
||
* testsuite/gas/arm/armv8-a+rdma.d: Add assembler command line options.
|
||
Make source file explicit.
|
||
* testsuite/gas/arm/armv8-a+rdma.l: New.
|
||
* testsuite/gas/arm/armv8-a+rdma.s: Remove .arch and .arch_extension
|
||
directives. Fix white-space.
|
||
* testsuite/gas/arm/armv8_1-a+simd.d: New.
|
||
|
||
2016-03-02 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
* testsuite/gas/i386/x86_64-intel.d: Adjusted for COFF.
|
||
|
||
2016-02-29 Cupertino Miranda <cmiranda@synopsys.com>
|
||
Claudiu Zissulescu <Claudiu.Zissulescu@synopsys.com>
|
||
|
||
* config/tc-arc.c (arc_extra_reloc): Change size to 0.
|
||
(tc_arc_fix_adjustable): Changed default return value to 1.
|
||
* testsuite/gas/arc/j.d: Updated expected symbol
|
||
* testsuite/gas/arc/jl.d: Likewise
|
||
* testsuite/gas/arc/relax-avoid1.d: Likewise
|
||
* testsuite/gas/arc/st.d: Likewise
|
||
|
||
2016-02-29 Claudiu Zissulescu <Claudiu.Zissulescu@synopsys.com>
|
||
|
||
* config/tc-arc.c: Enable code density instructions for ARC EM.
|
||
|
||
2016-02-26 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
PR ld/19645
|
||
* NEWS: Mention --enable-elf-stt-common and --elf-stt-common=
|
||
for ELF assemblers.
|
||
* as.c (flag_use_elf_stt_common): New.
|
||
(show_usage): Add --elf-stt-common=.
|
||
(option_values): Add OPTION_ELF_STT_COMMON.
|
||
(std_longopts): Add --elf-stt-common=.
|
||
(parse_args): Handle --elf-stt-common=.
|
||
* as.h (flag_use_elf_stt_common): New.
|
||
* config.in: Regenerated.
|
||
* configure: Likewise.
|
||
* configure.ac: Add --enable-elf-stt-common and define
|
||
DEFAULT_GENERATE_ELF_STT_COMMON.
|
||
* gas/write.c (write_object_file): Set BFD_CONVERT_ELF_COMMON
|
||
and BFD_USE_ELF_STT_COMMON if flag_use_elf_stt_common is set.
|
||
* doc/as.texinfo: Document --elf-stt-common=.
|
||
* testsuite/gas/elf/common3.s: New file.
|
||
* testsuite/gas/elf/common3a.d: Likewise.
|
||
* testsuite/gas/elf/common3b.d: Likewise.
|
||
* testsuite/gas/elf/common4.s: Likewise.
|
||
* testsuite/gas/elf/common4a.d: Likewise.
|
||
* testsuite/gas/elf/common4b.d: Likewise.
|
||
* testsuite/gas/i386/dw2-compress-3b.d: Likewise.
|
||
* testsuite/gas/i386/dw2-compressed-3b.d: Likewise.
|
||
* testsuite/gas/elf/elf.exp: Run common3a, common3b, common4a
|
||
and common4b.
|
||
* testsuite/gas/i386/dw2-compress-3.d: Renamed to ...
|
||
* testsuite/gas/i386/dw2-compress-3a.d: This. Pass
|
||
--elf-stt-common=no to as.
|
||
* testsuite/gas/i386/dw2-compressed-3.d: Renamed to ...
|
||
* testsuite/gas/i386/dw2-compressed-3a.d: This. Pass
|
||
--elf-stt-common=no to as.
|
||
* testsuite/gas/i386/i386.exp: Run dw2-compress-3a,
|
||
dw2-compress-3b, dw2-compressed-3a and dw2-compressed-3b instead
|
||
of dw2-compress-3 and dw2-compressed-3.
|
||
|
||
2016-02-25 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* as.c (select_emulation_mode): Add const qualifiers.
|
||
* as.h: Likewise.
|
||
* config/bfin-defs.h: Likewise.
|
||
* config/bfin-parse.y: Likewise.
|
||
* config/rx-parse.y: Likewise.
|
||
* config/tc-aarch64.c (struct aarch64_option_table): Likewise.
|
||
(struct aarch64_cpu_option_table): Likewise.
|
||
(struct aarch64_arch_option_table): Likewise.
|
||
(struct aarch64_option_cpu_value_table): Likewise.
|
||
(struct aarch64_long_option_table): Likewise.
|
||
(struct aarch64_option_abi_value_table): Likewise.
|
||
* config/tc-arm.c (struct reloc_entry): Likewise.
|
||
(tc_gen_reloc): Likewise.
|
||
(struct arm_option_table): Likewise.
|
||
(struct arm_legacy_option_table): Likewise.
|
||
(struct arm_cpu_option_table): Likewise.
|
||
(struct arm_arch_option_table): Likewise.
|
||
(struct arm_option_extension_value_table): Likewise.
|
||
(struct arm_option_fpu_value_table): Likewise.
|
||
(struct arm_option_value_table): Likewise.
|
||
(struct arm_long_option_table): Likewise.
|
||
* config/tc-avr.c (struct avr_opcodes_s): Likewise.
|
||
(struct mcu_type_s): Likewise.
|
||
(struct exp_mod_s): Likewise.
|
||
(avr_operand): Likewise.
|
||
(avr_operands): Likewise.
|
||
* config/tc-d10v.c (md_begin): Likewise.
|
||
* config/tc-dlx.c: Likewise.
|
||
* config/tc-fr30.c (fr30_is_colon_insn): Likewise.
|
||
* config/tc-ft32.c (parse_condition): Likewise.
|
||
* config/tc-h8300.c (do_a_fix_imm): Likewise.
|
||
* config/tc-hppa.c (pa_ip): Likewise.
|
||
(hppa_regname_to_dw2regnum): Likewise.
|
||
* config/tc-i370.c (i370_elf_suffix): Likewise.
|
||
* config/tc-i960.c (struct tabentry): Likewise.
|
||
* config/tc-m32r.c: Likewise.
|
||
* config/tc-m68k.c: Likewise.
|
||
* config/tc-m68k.h: Likewise.
|
||
* config/tc-mcore.c (parse_psrmod): Likewise.
|
||
* config/tc-metag.c (struct metag_core_option): Likewise.
|
||
(struct metag_long_option): Likewise.
|
||
* config/tc-microblaze.c: Likewise.
|
||
* config/tc-mips.c (macro): Likewise.
|
||
* config/tc-mn10200.c: Likewise.
|
||
* config/tc-mn10300.c: Likewise.
|
||
* config/tc-msp430.c (struct rcodes_s): Likewise.
|
||
(struct hcodes_s): Likewise.
|
||
(md_parse_option): Likewise.
|
||
* config/tc-ns32k.c (struct ns32k_option): Likewise.
|
||
(optlist): Likewise.
|
||
* config/tc-ppc.c (ppc_elf_suffix): Likewise.
|
||
(tc_ppc_regname_to_dw2regnum): Likewise.
|
||
* config/tc-ppc.h: Likewise.
|
||
* config/tc-rl78.c: Likewise.
|
||
* config/tc-rx.c (struct cpu_type): Likewise.
|
||
* config/tc-sh.c (sh_regname_to_dw2regnum): Likewise.
|
||
* config/tc-sparc.c (struct priv_reg_entry): Likewise.
|
||
(sparc_ip): Likewise.
|
||
* config/tc-spu.c (insn_fmt_string): Likewise.
|
||
* config/tc-tic54x.c (tic54x_set_default_include): Likewise.
|
||
* config/tc-v850.c: Likewise.
|
||
* config/tc-visium.c (struct visium_arch_option_table): Likewise.
|
||
(struct visium_long_option_table): Likewise.
|
||
* config/tc-xgate.c: Likewise.
|
||
* config/tc-z8k.c: Likewise.
|
||
* read.c (add_include_dir): Likewise.
|
||
* read.h: Likewise.
|
||
|
||
2016-02-25 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* testsuite/gas/all/gas.exp: Change target pattern to cover
|
||
arceb-*.
|
||
* testsuite/gas/all/redef3.d: Likewise.
|
||
* testsuite/gas/elf/elf.exp: Likewise.
|
||
|
||
2016-02-24 Renlin Li <renlin.li@arm.com>
|
||
|
||
* config/tc-arm.c (BAD_FP16): New error message macro.
|
||
(do_scalar_fp16_v82_encode): Change the coproc field to 9 for armv8.2
|
||
fp16 scalar instructions.
|
||
(neon_check_type): Allow different size from key.
|
||
(do_vfp_nsyn_add_sub): Add support SE_H shape support.
|
||
(try_vfp_nsyn): Likewise.
|
||
(do_vfp_nsyn_mla_mls): Likewise.
|
||
(do_vfp_nsyn_fma_fms): Likewise.
|
||
(do_vfp_nsyn_ldm_stm): Likewise
|
||
(do_vfp_nsyn_sqrt): Likewise
|
||
(do_vfp_nsyn_div): Likewise
|
||
(do_vfp_nsyn_nmul): Likewise.
|
||
(do_vfp_nsyn_cmp): Likewise.
|
||
(do_neon_shll): Likewise.
|
||
(do_vfp_nsyn_cvt_fpv8): Likewise.
|
||
(do_neon_cvttb_2): Likewise.
|
||
(do_neon_mov): Likewise.
|
||
(do_neon_rshift_round_imm): Likewise.
|
||
(do_neon_ldr_str): Likewise.
|
||
(do_vfp_nsyn_fpv8): Likewise.
|
||
(do_vmaxnm): Likewise.
|
||
(do_vrint_1): Likewise.
|
||
(insns): New entry for vins, vmovx.
|
||
(md_apply_fix): Left shift 1 bit for fp16 vldr/vstr.
|
||
* testsuite/gas/arm/armv8-2-fp16-scalar-thumb.d: New.
|
||
* testsuite/gas/arm/armv8-2-fp16-scalar.d: New.
|
||
* testsuite/gas/arm/armv8-2-fp16-scalar.s: New.
|
||
* testsuite/gas/arm/armv8-2-fp16-scalar-bad.s: New
|
||
* testsuite/gas/arm/armv8-2-fp16-scalar-bad.d: New
|
||
* testsuite/gas/arm/armv8-2-fp16-scalar-bad.l: New
|
||
|
||
2016-02-24 Renlin Li <renlin.li@arm.com>
|
||
|
||
* config/tc-arm.c (NEON_ENC_TAB): Add fp16 instruction shape.
|
||
(neon_shape_class): New SC_HALF.
|
||
(neon_shape_el): New SE_H.
|
||
(neon_shape_el_size): New size for SE_H.
|
||
(N_F_ALL): New macro to aggregate N_F16, N_F32, N_64.
|
||
(neon_select_shape): Add SE_H support code.
|
||
(el_type_of_type_chk): Use N_F_ALL.
|
||
(do_vfp_nsyn_cvt): Add SE_H shape support.
|
||
(do_neon_cvtz): Likewise.
|
||
(do_neon_cvt_1): Likewise.
|
||
(do_neon_cvttb_1): Likewise.
|
||
|
||
2016-02-24 Renlin Li <renlin.li@arm.com>
|
||
|
||
* testsuite/gas/arm/copro.d: Adjust output.
|
||
* testsuite/gas/arm/copro.s: Adjust co-processor num.
|
||
|
||
2016-02-24 Renlin Li <renlin.li@arm.com>
|
||
|
||
* testsuite/gas/arm/mask_1.d: New.
|
||
* testsuite/gas/arm/mask_1.s: New.
|
||
|
||
2016-02-24 Renlin Li <renlin.li@arm.com>
|
||
|
||
* testsuite/gas/arm/copro.s: Use coprocessor other than 10, 11.
|
||
* testsuite/gas/arm/copro.d: Update.
|
||
|
||
2016-02-24 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
|
||
|
||
* config/tc-arm.c (arm_cpus): Add entry for cortex-a32.
|
||
* doc/c-arm.texi (ARM Options): Document cortex-a32.
|
||
|
||
2016-02-24 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
|
||
|
||
* doc/c-arm.texi (ARM Options): Document cortex-a17.
|
||
|
||
2016-02-23 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
* testsuite/gas/elf/elf.exp: Skip tests for common directive on
|
||
hpux.
|
||
|
||
2016-02-22 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* output-file.c (output_file_create): Make file name argument const.
|
||
(output_file_close): Likewise.
|
||
* output-file.h (output_file_create): Adjust.
|
||
(output_file_close): Likewise.
|
||
* depend.c (quote_string_for_make): Make src argument const char *.
|
||
(register_dependency): Likewise.
|
||
(wrap_output): Likewise.
|
||
* as.h (register_dependency): Adjust.
|
||
* config/tc-xtensa.c (finish_vinsn): Remove unnecessary calls to
|
||
as_where ();
|
||
* symbols.c (S_SET_EXTERNAL): Likewise.
|
||
* input-scrub.c (as_where): Return the file name.
|
||
* as.h (as_where): Adjust prototype.
|
||
* app.c (do_scrub_chars): Adjust.
|
||
* cond.c (s_elseif): Likewise.
|
||
(s_else): Likewise.
|
||
(initialize_cframe): Likewise.
|
||
* config/obj-coff.c (obj_coff_init_stab_section): Likewise.
|
||
* config/obj-elf.c (obj_elf_init_stab_section): Likewise.
|
||
* config/obj-som.c (obj_som_init_stab_section): Likewise.
|
||
* config/tc-aarch64.c (output_info): Likewise.
|
||
* config/tc-ia64.c (md_assemble): Likewise.
|
||
(dot_alias): Likewise.
|
||
* config/tc-m68k.c (m68k_frob_label): Likewise.
|
||
* config/tc-mmix.c (s_bspec): Likewise.
|
||
(mmix_handle_mmixal): Likewise.
|
||
* config/tc-rx.c (rx_include): Likewise.
|
||
* config/tc-tic54x.c (tic54x_set_default_include): Likewise.
|
||
(tic54x_adjust_symtab): Likewise.
|
||
* config/tc-xtensa.c (directive_push): Likewise.
|
||
(xtensa_sanity_check): Likewise.
|
||
(xtensa_relax_frag): Likewise.
|
||
(md_convert_frag): Likewise.
|
||
(tinsn_to_slotbuf): Likewise.
|
||
* dwarf2dbg.c (dwarf2_where): Likewise.
|
||
* ecoff.c (add_file): Likewise.
|
||
(ecoff_generate_asm_lineno): Likewise.
|
||
* expr.c (make_expr_symbol): Likewise.
|
||
* frags.c (frag_new): Likewise.
|
||
(frag_var_init): Likewise.
|
||
* listing.c (listing_newline): Likewise.
|
||
* messages.c (identify): Likewise.
|
||
(as_show_where): Likewise.
|
||
(as_warn_internal): Likewise.
|
||
(as_bad_internal): Likewise.
|
||
* read.c (s_irp): Likewise.
|
||
(s_macro): Likewise.
|
||
(s_reloc): Likewise.
|
||
* stabs.c (stabs_generate_asm_file): Likewise.
|
||
(stabs_generate_asm_lineno): Likewise.
|
||
(stabs_generate_asm_func): Likewise.
|
||
* write.c (fix_new_internal): Likewise.
|
||
* as.h (PRINTF_WHERE_LIKE): Make file name argument const.
|
||
(as_warn_value_out_of_range): Adjust prototype.
|
||
(as_bad_value_out_of_range): Adjust prototype.
|
||
* messages.c (identify): Make file name argument const char *.
|
||
(as_warn_internal): Likewise.
|
||
(as_warn_where): Likewise.
|
||
(as_bad_internal): Likewise.
|
||
(as_bad_where): Likewise.
|
||
(as_internal_value_out_of_range): Likewise.
|
||
(as_warn_value_out_of_range): Likewise.
|
||
(as_bad_value_out_of_range): Likewise.
|
||
* as.h (found_comment_file): Change type to const char *.
|
||
* cond.c (file_line::file): Likewise.
|
||
* config/obj-coff.c (obj_coff_init_stab_section): Make variable const.
|
||
* config/obj-elf.c (obj_elf_init_stab_section): Likewise.
|
||
* config/obj-som.c (obj_som_init_stab_section): Likewise.
|
||
* config/tc-aarch64.c (output_info): Likewise.
|
||
* config/tc-alpha.c (insert_operand): Likewise.
|
||
* config/tc-arc.c (insert_operand): Likewise.
|
||
* config/tc-d30v.c (check_size): Likewise.
|
||
* config/tc-ia64.c (struct alias): Likewise.
|
||
* config/tc-m68k.c (struct label_line): Likewise.
|
||
* config/tc-mcore.c (md_apply_fix): Likewise.
|
||
* config/tc-microblaze.c (md_estimate_size_before_relax): Likewise.
|
||
* config/tc-mips.c (mips16_immed): Likewise.
|
||
* config/tc-mmix.c (mmix_handle_mmixal): Likewise.
|
||
* config/tc-ppc.c (ppc_insert_operand): Likewise.
|
||
* config/tc-rx.c (rx_include): Likewise.
|
||
* config/tc-s390.c (s390_insert_operand): Likewise.
|
||
* config/tc-tic54x.c (tic54x_set_default_include): Likewise.
|
||
(tic54x_adjust_symtab): Likewise.
|
||
* config/tc-tilegx.c (insert_operand): Likewise.
|
||
(apply_special_operator): Likewise.
|
||
* config/tc-tilepro.c (insert_operand): Likewise.
|
||
* config/tc-xtensa.c (directive_push): Likewise.
|
||
* ecoff.c (add_file): Likewise.
|
||
(ecoff_generate_asm_lineno): Likewise.
|
||
* listing.c (listing_newline): Likewise.
|
||
* read.c (s_irp): Likewise.
|
||
* write.c (install_reloc): Likewise.
|
||
* write.h (struct fix): Likewise.
|
||
* input-file.c (file_name): Change type to const char *.
|
||
(saved_file::file_name): Likewise.
|
||
(input_file_open): Change type of argument to const char *.
|
||
* input-file.h (input_file_open): Adjust.
|
||
* input-scrub.c (logical_input_file): change type to const char *.
|
||
(physical_input_file): Likewise.
|
||
(struct input_save): Adjust.
|
||
(input_scrub_push): Adjust.
|
||
(input_scrub_begin): Adjust.
|
||
(as_where): Adjust.
|
||
* input-scrub.c (input_scrub_new_file): Make file name argument const.
|
||
(input_scrub_include_file): Likewise.
|
||
(new_logical_line_flags): Likewise.
|
||
(new_logical_line): Likewise.
|
||
* as.h: Adjust.
|
||
* frags.h (struct frag): Change type of fr_file to const char *.
|
||
* expr.c (expr_symbol_where): Change type of file argument to
|
||
const char **.
|
||
* expr.h (expr_symbol_where): Likewise.
|
||
* config/tc-i370.c (md_apply_fix): adjust.
|
||
* config/tc-mmix.c (mmix_md_end): Likewise.
|
||
* config/tc-ppc.c (md_apply_fix): Likewise.
|
||
* config/tc-s390.c (md_apply_fix): Likewise.
|
||
* symbols.c (report_op_error): Likewise.
|
||
(resolve_symbol_value): Likewise.
|
||
* config/tc-ia64.c (slot::src_file): Change type to const char *.
|
||
(rsrc::file): Likewise.
|
||
* config/tc-xtensa.c (xtensa_sanity_check): Change type of variable to
|
||
const char *.
|
||
(xtensa_relax_frag): Likewise.
|
||
(md_convert_frag): Likewise.
|
||
(tinsn_to_slotbuf): Likewise.
|
||
* expr.c (expr_symbol_line): Likewise.
|
||
* macro.c (define_macro): Likewise.
|
||
* macro.h (macro_struct): Likewise.
|
||
* messages.c (as_show_where): Likewise.
|
||
* read.c (s_macro): Likewise.
|
||
* stabs.c (stabs_generate_asm_file): Likewise.
|
||
(generate_asm_file): Likewise.
|
||
(stabs_generate_asm_lineno): Likewise.
|
||
* write.h (struct reloc_list): Likewise.
|
||
* input-scrub.c (as_where): Change return type to const char *.
|
||
* as.h (as_wheree): Adjust.
|
||
|
||
2016-02-21 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
* write.c (compress_debug): Move BFD compression bits setting
|
||
to ...
|
||
(write_object_file): Here.
|
||
|
||
2016-02-20 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
* config/tc-i386.c (register_number): Check RegVRex.
|
||
* testsuite/gas/i386/x86-64-avx512f.s: Add a test for vgatherqpd
|
||
with %zmm19 and %zmm3.
|
||
* testsuite/gas/i386/x86-64-avx512f-intel.d: Updated.
|
||
* testsuite/gas/i386/x86-64-avx512f.d: Likewise.
|
||
|
||
2016-02-19 Matthew Wahab <matthew.wahab@arm.com>
|
||
Jiong Wang <jiong.wang@arm.com>
|
||
|
||
* config/tc-arm.c (arm_ext_fp16): New.
|
||
(arm_extensions): New entry for "fp16".
|
||
|
||
2016-02-19 Nick Clifton <nickc@redhat.com>
|
||
|
||
PR 19630
|
||
* read.c (read_a_source_file): Check for assemble_one returning
|
||
with input_line_pointer set to NULL.
|
||
|
||
2016-02-19 Trevor Saunders <tbsaunde+binutils@tbsaunde.org>
|
||
|
||
* listing.c (rebuffer_line): Change return type to void.
|
||
|
||
* symbols.c (decode_local_label_name): Make type a const char *.
|
||
* listing.c (print_source): Make type of p const char *.
|
||
(print_line): Make type of string const char *.
|
||
(buffer_line): Return const char *.
|
||
(title): Make type const char *.
|
||
(subtitle): Likewise.
|
||
(listing_listing): Make type of p const char *.
|
||
* messages.c (as_internal_value_out_of_range): Make type of prefix
|
||
const char *.
|
||
* stabs.c (s_stab_generic): make type of stab_secname, stabstr_secname
|
||
and string const char *.
|
||
* read.c (_bfd_rel): Make type of name const char *.
|
||
* app.c (out_string): Change type to const char *.
|
||
(struct app_save::out_string): Likewise.
|
||
|
||
2016-02-18 Dan Gisselquist <dgisselq@verizon.net>
|
||
Nick Clifton <nickc@redhat.com>
|
||
|
||
* read.c (finish_bundle): Avoid recording a negative alignment.
|
||
(do_align): Use unsigned values for n, len and max. Only create
|
||
a frag if the alignment requirement is greater than the minimum
|
||
byte alignment. Avoid recording a negative alignment.
|
||
(s_align): Use unsigned values where appropriate.
|
||
(bss_alloc): Use an unsigned value for the alignment.
|
||
(sizeof_sleb128): Add a comment noting that we encode one octet
|
||
per byte, regardless of the value of OCTETS_PER_BYTE_POWER.
|
||
(emit_leb129_expr): Abort if the emitted encoding was longer than
|
||
expected.
|
||
* read.h (output_leb128): Update prototype.
|
||
(sizeof_leb128): Update prototype.
|
||
(bss_alloc): Update prototype.
|
||
* write.c (record_alignment): Use an unsigned value for the
|
||
alignment. Do not record alignments less than the minimum
|
||
alignment for a byte.
|
||
* write.h (record_alignment): Update prototype.
|
||
|
||
2016-02-17 Max Filippov <jcmvbkbc@gmail.com>
|
||
|
||
* config/tc-xtensa.c (xtensa_move_literals): Fix check for
|
||
.init.literal/.fini.literal section name.
|
||
* testsuite/gas/xtensa/all.exp: Add init-fini-literals to the
|
||
list of xtensa tests.
|
||
* testsuite/gas/xtensa/init-fini-literals.d: New file:
|
||
init-fini-literals test result patterns.
|
||
* testsuite/gas/xtensa/init-fini-literals.s: New file:
|
||
init-fini-literals test.
|
||
|
||
2016-02-17 Nick Clifton <nickc@redhat.com>
|
||
|
||
* config/tc-msp430.c (msp430_mcu_data): Sync with data from TI's
|
||
devices.csv file as of March 2016.
|
||
|
||
2016-02-16 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* config/tc-arc.c (tc_arc_frame_initial_instructions): New
|
||
function.
|
||
(tc_arc_regname_to_dw2regnum): Likewise.
|
||
* config/tc-arc.h (TARGET_USE_CFIPOP): Define
|
||
(tc_cfi_frame_initial_instructions): Likewise.
|
||
(tc_regname_to_dw2regnum): Likewise.
|
||
* testsuite/gas/cfi/cfi-arc-1.d: New file.
|
||
* testsuite/gas/cfi/cfi-arc-1.s: Likewise.
|
||
* testsuite/gas/cfi/cfi.exp: Allow running tests for arc.
|
||
|
||
2016-02-16 Trevor Saunders <tbsaunde@tbsaunde.org>
|
||
|
||
* doc/internals.texi (S_IS_EXTERN): Remove.
|
||
|
||
2016-02-16 Nick Clifton <nickc@redhat.com>
|
||
|
||
* doc/as.texinfo (Section): Fix up texinfo snafus in previous
|
||
update.
|
||
|
||
2016-02-16 Renlin Li <renlin.li@arm.com>
|
||
|
||
PR gas/19620
|
||
* config/tc-aarch64.c (parse_half): Remove restrictions on symbol name.
|
||
* testsuite/gas/aarch64/movw_label.d: New.
|
||
* testsuite/gas/aarch64/movw_label.s: New.
|
||
|
||
2016-02-15 Vinay Kumar G. <Vinay.G@kpit.com>
|
||
|
||
PR gas/19556
|
||
* config/rx-parse.y (MOV): Opcode generation for index
|
||
register addressing mode.
|
||
* testsuite/gas/rx/rx.exp: Updated for new testcase.
|
||
* testsuite/gas/rx/pr19665.s: New file.
|
||
* testsuite/gas/rx/pr19665.s: New file.
|
||
* testsuite/gas/rx/mov.d: Update expected output.
|
||
|
||
2016-02-15 Nick Clifton <nickc@redhat.com>
|
||
|
||
* doc/as.texinfo (.section): Document that numeric values can now
|
||
be used for the flags and type fields of the ELF target's .section
|
||
directive. Add notes about the restrictions on setting flags and
|
||
types.
|
||
* config/obj-elf.c (obj_elf_change_section): Allow known sections
|
||
to be given processor specific section types. Allow processor and
|
||
application specific flags of a section to be set after
|
||
definition.
|
||
(obj_elf_parse_section_letters): Handle parsing numeric values.
|
||
(obj_elf_section_type): Handle parsing numeric values.
|
||
(obj_elf_section): Allow numeric type values.
|
||
* config/obj-elf.h (obj_elf_change_section): Update prototype.
|
||
* testsuite/gas/elf/section10.d: New test.
|
||
* testsuite/gas/elf/section10.s: Source file for new test.
|
||
* testsuite/gas/elf/elf.exp: Run the new test.
|
||
* testsuite/gas/i386/ilp32/x86-64-unwind.d: Remove dependency upon
|
||
the description of the flags produced by readelf.
|
||
* testsuite/gas/tic6x/scomm-directive-4.d: Likewise.
|
||
* NEWS: Mention the new feature.
|
||
|
||
2016-02-11 Nick Clifton <nickc@redhat.com>
|
||
|
||
PR gas/19614
|
||
* dw2gencfi.c (cfi_sections_set): Delay setting this variable
|
||
until it is actually used.
|
||
(cfi_set_sections): Set cfi_sections_set to true.
|
||
(dot_cfi_startproc): Likewise.
|
||
(dot_cfi_endproc): Likewise.
|
||
(dot_cfi_fde_data): Likewise.
|
||
(cfi_finish): Likewise.
|
||
(dot_cfi_sections): Do not set cfi_sections_set.
|
||
* doc/as.texinfo (.cfi_sections): Note that targets can provide
|
||
their own cfi section name. Also note that the directive can be
|
||
reissued provided that CFI generation has not started.
|
||
* testsuite/gas/mips/compact-eh-err2.s: Add .cfi_startproc and
|
||
.cfi_endproc directives so that the redefinition of .cfi_sections
|
||
will trigger the generation of the error message.
|
||
* testsuite/gas/mips/compact-eh-err2.l: Update expected line
|
||
number of error message.
|
||
|
||
2016-02-10 Claudiu Zissulescu <claziss@synopsys.com>
|
||
Janek van Oirschot <jvanoirs@synopsys.com>
|
||
|
||
* config/tc-arc.h (TC_FRAG_TYPE, TC_PCREL_ADJUST, MAX_INSN_ARGS)
|
||
(MAX_INSN_FLGS, MAX_FLAG_NAME_LENGHT, TC_GENERIC_RELAX_TABLE):
|
||
Define.
|
||
(arc_flags, arc_relax_type): New structure.
|
||
* config/tc-arc.c (FRAG_MAX_GROWTH, RELAX_TABLE_ENTRY)
|
||
(RELAX_TABLE_ENTRY_MAX): New define.
|
||
(relaxation_state, md_relax_table, arc_relaxable_insns)
|
||
(arc_num_relaxable_ins): New variable.
|
||
(rlx_operand_type, arc_rlx_types): New enums.
|
||
(arc_relaxable_ins): New structure.
|
||
(OPTION_RELAX): New option.
|
||
(arc_insn): New relax member.
|
||
(arc_flags): Remove.
|
||
(relax_insn_p): New function.
|
||
(apply_fixups): Likewise.
|
||
(relaxable_operand): Likewise.
|
||
(may_relax_expr): Likewise.
|
||
(relaxable_flag): Likewise.
|
||
(arc_pcrel_adjust): Likewise.
|
||
(md_estimate_size_before_relax): Implement.
|
||
(md_convert_frag): Likewise.
|
||
(md_parse_option): Handle new mrelax option.
|
||
(md_show_usage): Likewise.
|
||
(assemble_insn): Set relax member.
|
||
(emit_insn0): New function.
|
||
(emit_insn1): Likewise.
|
||
(emit_insn): Handle relaxation case.
|
||
* NEWS: Mention the new relaxation option.
|
||
* doc/c-arc.texi (ARC Options): Document new mrelax option.
|
||
* doc/as.texinfo (Target ARC Options): Likewise.
|
||
* testsuite/gas/arc/relax-avoid1.d: New file.
|
||
* testsuite/gas/arc/relax-avoid1.s: Likewise.
|
||
* testsuite/gas/arc/relax-avoid2.d: Likewise.
|
||
* testsuite/gas/arc/relax-avoid2.s: Likewise.
|
||
* testsuite/gas/arc/relax-avoid3.d: Likewise.
|
||
* testsuite/gas/arc/relax-avoid3.s: Likewise.
|
||
* testsuite/gas/arc/relax-b.d: Likewise.
|
||
* testsuite/gas/arc/relax-b.s: Likewise.
|
||
|
||
2016-02-08 Nick Clifton <nickc@redhat.com>
|
||
|
||
* config/tc-ia64.c (dot_prologue): Fix formatting.
|
||
|
||
2016-02-04 Nick Clifton <nickc@redhat.com>
|
||
|
||
* config/obj-elf.c (obj_elf_change_section): Remove support for
|
||
ARM NOREAD sections.
|
||
* config/tc-arm.c (arm_elf_section_letter): Delete.
|
||
* config/tc-arm.h (md_elf_section_letter): Delete.
|
||
* doc/c-arm.texi (ARM Section Attribute): Delete section.
|
||
* testsuite/gas/arm/section-execute-only.d: Delete.
|
||
* testsuite/gas/arm/section-execute-only.s: Delete.
|
||
|
||
2016-02-04 Nick Clifton <nickc@redhat.com>
|
||
|
||
PR target/19561
|
||
* config/tc-msp430.c (msp430_operands): Remove case 7. Use case 2
|
||
to handle encoding of RRUX instruction.
|
||
* testsuite/gas/msp430/msp430x.s: Add more tests of the extended
|
||
shift instructions.
|
||
* testsuite/gas/msp430/msp430x.d: Update expected disassembly.
|
||
|
||
2016-02-03 Max Filippov <jcmvbkbc@gmail.com>
|
||
|
||
* config/tc-xtensa.c (md_apply_fix): Mark BFD_RELOC_XTENSA_DIFF*
|
||
substitutions for BFD_RELOC_* as unsigned.
|
||
* testsuite/gas/xtensa/all.exp: Add loc to list of xtensa tests.
|
||
* testsuite/gas/xtensa/loc.d: New file: loc test result patterns.
|
||
* testsuite/gas/xtensa/loc.s: New file: loc test.
|
||
|
||
2016-02-03 Kevin Buettner <kevinb@redhat.com>
|
||
|
||
* config/tc-msp430.h (DWARF2_ADDR_SIZE): Set to 4.
|
||
|
||
2016-02-03 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
PR gas/19520
|
||
* NEWS: Mention new command line option -mrelax-relocations and
|
||
new configure option --enable-x86-relax-relocations for x86
|
||
target.
|
||
* config.in: Regenerated.
|
||
* configure.ac: Add --enable-x86-relax-relocations.
|
||
(ac_default_x86_relax_relocations): New. Default to 1 except
|
||
for x86 Solaris targets older than Solaris 12.
|
||
(DEFAULT_GENERATE_X86_RELAX_RELOCATIONS): Define.
|
||
* configure: Likewise.
|
||
* config/tc-i386.c (generate_relax_relocations): New.
|
||
(OPTION_MRELAX_RELOCATIONS): Likewise.
|
||
(output_disp): Don't generate relax relocations if
|
||
generate_relax_relocations is 0.
|
||
(md_longopts): Add -mrelax-relocations.
|
||
(md_show_usage): Likewise.
|
||
(md_parse_option): Handle OPTION_MRELAX_RELOCATIONS.
|
||
* doc/c-i386.texi: Document -mrelax-relocations=.
|
||
* testsuite/gas/i386/got-no-relax.d: New file.
|
||
* testsuite/gas/i386/x86-64-gotpcrel-no-relax.d: Likewise.
|
||
* testsuite/gas/i386/got.d: Pass -mrelax-relocations=yes to as.
|
||
* testsuite/gas/i386/localpic.d: Likewise.
|
||
* testsuite/gas/i386/mixed-mode-reloc32.d: Likewise.
|
||
* testsuite/gas/i386/reloc32.d: Likewise.
|
||
* testsuite/gas/i386/x86-64-gotpcrel.d: Likewise.
|
||
* testsuite/gas/i386/x86-64-localpic.d: Likewise.
|
||
* testsuite/gas/i386/ilp32/x86-64-gotpcrel.d: Likewise.
|
||
* testsuite/gas/i386/ilp32/x86-64-localpic.d: Likewise.
|
||
* testsuite/gas/i386/i386.exp: Run got-no-relax and
|
||
x86-64-gotpcrel-no-relax.
|
||
|
||
2016-02-03 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
* NEWS: Mention new command line option -mfence-as-lock-add=yes
|
||
for x86 target.
|
||
|
||
2016-02-03 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
* NEWS: Remove duplicated marker for 2.26.
|
||
|
||
2016-02-02 Renlin Li <renlin.li@arm.com>
|
||
|
||
* testsuite/gas/arm/thumb2_it_search.d: Skip non-elf targets.
|
||
|
||
2016-02-02 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* testsuite/gas/ip2k/allinsn.d: New file.
|
||
* testsuite/gas/ip2k/allinsn.s: New file.
|
||
* testsuite/gas/ip2k/ip2k-allinsn.exp: New file.
|
||
|
||
2016-02-02 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* testsuite/gas/epiphany/addr-syntax.d: Add explicit 0 offset to
|
||
some load instructions.
|
||
* testsuite/gas/epiphany/allinsn.d: Likewise.
|
||
* testsuite/gas/epiphany/regression.d: Likewise.
|
||
|
||
2016-02-02 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* testsuite/gas/epiphany/addr-syntax.d: Remove unneeded '.l'
|
||
suffixes from instruction mnemonics in expected output.
|
||
* testsuite/gas/epiphany/allinsn.d: Likewise.
|
||
* testsuite/gas/epiphany/regression.d: Likewise.
|
||
* testsuite/gas/epiphany/sample.d: Likewise.
|
||
|
||
2016-02-02 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* testsuite/gas/epiphany/addr-syntax.d: Update expected register
|
||
names.
|
||
* testsuite/gas/epiphany/allinsn.d: Likewise.
|
||
* testsuite/gas/epiphany/sample.d: Likewise.
|
||
|
||
2016-02-02 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* testsuite/gas/epiphany/sample.d: Update expected output.
|
||
|
||
2016-01-26 Claudiu Zissulescu <claziss@synopsys.com>
|
||
|
||
* config/tc-arc.c (md_apply_fix): Allow addendum.
|
||
(arc_reloc_op): Allow complex expressions for tpoff.
|
||
(md_apply_fix): Handle resolved TLS local symbol.
|
||
* testsuite/gas/arc/tls-relocs1.d: New file.
|
||
* testsuite/gas/arc/tls-relocs1.s: Likewise.
|
||
|
||
2016-02-01 Loria <Loria@phantasia.org>
|
||
|
||
PR target/19311
|
||
* config/tc-arm.c (encode_arm_immediate): Recode to improve
|
||
efficiency and avoid an LLVM loop optimization bug.
|
||
|
||
2016-02-01 Nick Clifton <nickc@redhat.com>
|
||
|
||
* config/tc-microblaze.c (parse_imm): Fix compile time warning
|
||
message extending a negative 32-bit value into a larger signed
|
||
value on a 32-bit host.
|
||
|
||
2016-01-29 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
PR gas/19532
|
||
* configure.ac (compressed_debug_sections): Replace == with =.
|
||
* configure: Regenerated.
|
||
|
||
2016-01-29 Andrew Senkevich <andrew.senkevich@intel.com>
|
||
H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
* config/tc-i386.c (avoid_fence): New.
|
||
(output_insn): Encode as lock addl $0x0, (%{r,e}sp) if avoid_fence
|
||
is true.
|
||
(OPTION_FENCE_AS_LOCK_ADD): New.
|
||
(md_longopts): Add -mfence-as-lock-add.
|
||
(md_parse_option): Handle -mfence-as-lock-add.
|
||
(md_show_usage): Add -mfence-as-lock-add=[no|yes].
|
||
* doc/c-i386.texi (-mfence-as-lock-add): Document.
|
||
* testsuite/gas/i386/i386.exp: Run new tests.
|
||
* testsuite/gas/i386/fence-as-lock-add.s: New.
|
||
* testsuite/gas/i386/fence-as-lock-add-yes.d: Likewise.
|
||
* testsuite/gas/i386/fence-as-lock-add-no.d: Likewise.
|
||
* testsuite/gas/i386/x86-64-fence-as-lock-add-yes.d: Likewise.
|
||
* testsuite/gas/i386/x86-64-fence-as-lock-add-no.d: Likewise.
|
||
|
||
2016-01-27 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
* configure.ac (compressed_debug_sections): Remove trailing `]'.
|
||
* configure: Regenerated.
|
||
|
||
2016-01-25 H.J. Lu <hongjiu.lu@intel.com>
|
||
|
||
* config/tc-i386.c (OPTION_OMIT_LOCK_PREFIX): Renamed to ...
|
||
(OPTION_MOMIT_LOCK_PREFIX): This.
|
||
(md_longopts): Updated.
|
||
(md_parse_option): Likewise.
|
||
|
||
2016-01-25 Catherine Moore <clm@codesourcery.com>
|
||
|
||
* config/mips/tc-mips.c (md_begin): Avoid gp-relative addressing
|
||
if abicalls are in effect.
|
||
* testsuite/gas/mips/sdata-gp.s: New test.
|
||
* testsuite/gas/mips/sdata-gp.d: New expected output
|
||
* testsuite/gas/mips/mips.exp: Run new test.
|
||
|
||
2016-01-25 Renlin Li <renlin.li@arm.com>
|
||
|
||
* testsuite/gas/arm/thumb2_it_search.d: New.
|
||
* testsuite/gas/arm/thumb2_it_search.s: New.
|
||
|
||
2016-01-21 Nick Clifton <nickc@redhat.com>
|
||
|
||
PR gas/19454
|
||
* testsuite/gas/arm/mapshort-elf.d: Fix expected output to cope
|
||
with arm-netbsdelf target.
|
||
* testsuite/gas/arm/blx-bl-convert.d: Skip for netbsdelf.
|
||
|
||
2016-01-20 Nick Clifton <nickc@redhat.com>
|
||
|
||
PR 19456
|
||
* testsuite/gas/arm/weakdef-1.d: Skip for VxWorks.
|
||
* testsuite/gas/arm/blx-bl-convert.d
|
||
* testsuite/gas/arm/plt-1.d: Likewise.
|
||
* testsuite/gas/arm/reloc-bad.d: Likewise.
|
||
* testsuite/gas/arm/thumb-w-good.d: Likewise.
|
||
* testsuite/gas/arm/thumb2_pool.d: Likewise.
|
||
* testsuite/gas/arm/ldconst.d: Adjust so that it works with VxWorks
|
||
* testsuite/gas/arm/tls_vxworks.d: Update expected output.
|
||
|
||
PR 19499
|
||
* doc/as.texinfo (Errors): Correct documentation describing the
|
||
interaction of .file and .line with warning and error messages.
|
||
|
||
PR 19458
|
||
* testsuite/gas/arm/armv8_2-a.d: Skip for COFF based targets.
|
||
* testsuite/gas/arm/archv8m-main.d: Likewise.
|
||
* testsuite/gas/arm/archv8m-base.d: Likewise.
|
||
|
||
2016-01-20 Matthew Wahab <matthew.wahab@arm.com>
|
||
|
||
* testsuite/gas/aarch64/armv8_2-a-illegal.d: New.
|
||
* testsuite/gas/aarch64/armv8_2-a-illegal.l: New.
|
||
* testsuite/gas/aarch64/armv8_2-a-illegal.s: New.
|
||
|
||
2016-01-20 Mickael Guene <mickael.guene@st.com>
|
||
Terry Guo <terry.guo@arm.com>
|
||
|
||
* config/obj-elf.c (obj_elf_change_section) : Allow arm section with
|
||
SHF_ARM_NOREAD section flag.
|
||
* config/tc-arm.h (md_elf_section_letter) : Implement this hook to
|
||
handle letter 'y'.
|
||
(arm_elf_section_letter) : Declare it.
|
||
* config/tc-arm.c (arm_elf_section_letter): Handle letter 'y' to set
|
||
SHF_ARM_NOREAD section flag.
|
||
* doc/c-arm.texi (ARM section attribute): Document the 'y' attribute.
|
||
|
||
* testsuite/gas/arm/section-execute-only.s: New test case.
|
||
* testsuite/gas/arm/section-execute-only.d: Expected output.
|
||
|
||
2016-01-18 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-mips.c (micromips_insn_length): Remove the mention
|
||
of 48-bit microMIPS instructions.
|
||
|
||
2016-01-18 Alan Modra <amodra@gmail.com>
|
||
|
||
* configure: Regenerate.
|
||
|
||
2016-01-17 Alan Modra <amodra@gmail.com>
|
||
|
||
* configure: Regenerate.
|
||
|
||
2016-01-17 Alan Modra <amodra@gmail.com>
|
||
|
||
* testsuite/gas/cfi/cfi.exp: Exclude m68hc11/12 from m68k test.
|
||
|
||
2016-01-14 Nick Clifton <nickc@redhat.com>
|
||
|
||
* testsuite/gas/rl78/sp-relative-movw.s: New test.
|
||
* testsuite/gas/rl78/sp-relative-movw.d: Expected disassembly.
|
||
* testsuite/gas/rl78/rl78.exp: Run the new test.
|
||
|
||
2016-01-14 Matthew Wahab <matthew.wahab@arm.com>
|
||
|
||
* testsuite/gas/aarch64/illegal-sysreg-2.l: New.
|
||
* testsuite/gas/aarch64/illegal-sysreg-2.d: New.
|
||
|
||
2016-01-13 Maciej W. Rozycki <macro@imgtec.com>
|
||
|
||
* config/tc-nios2.c (output_movia): Preset `code' to 0.
|
||
|
||
2016-01-13 Yoshinori Sato <ysato@users.sourceforge.jp>
|
||
|
||
* config/tc-h8300.c (get_operand): Remove spurious condition in
|
||
test for closing parenthesis.
|
||
|
||
2016-01-12 Matthew Wahab <matthew.wahab@arm.com>
|
||
|
||
* config/tc-arm.c (arm_ext_v8_2): New.
|
||
(insns): Add "esb".
|
||
* testsuite/gas/arm/armv8_2-a.d: New.
|
||
* testsuite/gas/arm/armv8_2-a.s: New.
|
||
|
||
2016-01-12 Alan Modra <amodra@gmail.com>
|
||
|
||
* testsuite/gas/ppc/vsx3.d: Accept nop padding.
|
||
|
||
2016-01-11 Peter Bergner <bergner@vnet.ibm.com>
|
||
|
||
* testsuite/gas/ppc/power9.d <xscmpnedp, xvcmpnedp, xvcmpnedp.,
|
||
xvcmpnesp, xvcmpnesp.>: Delete tests.
|
||
* testsuite/gas/ppc/power9.s: Likewise.
|
||
* testsuite/gas/ppc/vsx3.d: Likewise.
|
||
* testsuite/gas/ppc/vsx3.s: Likewise.
|
||
|
||
2016-01-08 Andreas Schwab <schwab@linux-m68k.org>
|
||
|
||
PR gas/13050
|
||
* testsuite/gas/m68k/all.exp: Add tests p13050-1 and p13050-2.
|
||
* testsuite/gas/m68k/p13050-1.s: New file.
|
||
* testsuite/gas/m68k/p13050-2.d: New file.
|
||
* testsuite/gas/m68k/p13050-2.s: New file.
|
||
|
||
2016-01-06 Andrew Burgess <andrew.burgess@embecosm.com>
|
||
|
||
* testsuite/gas/arc/adc.d: Add 'R_' prefix to relocation names.
|
||
* testsuite/gas/arc/add.d: Likewise.
|
||
* testsuite/gas/arc/and.d: Likewise.
|
||
* testsuite/gas/arc/asl.d: Likewise.
|
||
* testsuite/gas/arc/asr.d: Likewise.
|
||
* testsuite/gas/arc/bic.d: Likewise.
|
||
* testsuite/gas/arc/extb.d: Likewise.
|
||
* testsuite/gas/arc/extw.d: Likewise.
|
||
* testsuite/gas/arc/j.d: Likewise.
|
||
* testsuite/gas/arc/jl.d: Likewise.
|
||
* testsuite/gas/arc/ld2.d: Likewise.
|
||
* testsuite/gas/arc/lsr.d: Likewise.
|
||
* testsuite/gas/arc/mov.d: Likewise.
|
||
* testsuite/gas/arc/or.d: Likewise.
|
||
* testsuite/gas/arc/pcl-relocs.d: Likewise.
|
||
* testsuite/gas/arc/pcrel-relocs.d: Likewise.
|
||
* testsuite/gas/arc/pic-relocs.d: Likewise.
|
||
* testsuite/gas/arc/plt-relocs.d: Likewise.
|
||
* testsuite/gas/arc/rlc.d: Likewise.
|
||
* testsuite/gas/arc/ror.d: Likewise.
|
||
* testsuite/gas/arc/rrc.d: Likewise.
|
||
* testsuite/gas/arc/sbc.d: Likewise.
|
||
* testsuite/gas/arc/sda-relocs.d: Likewise.
|
||
* testsuite/gas/arc/sda-relocs2.d: Likewise.
|
||
* testsuite/gas/arc/sexb.d: Likewise.
|
||
* testsuite/gas/arc/sexw.d: Likewise.
|
||
* testsuite/gas/arc/st.d: Likewise.
|
||
* testsuite/gas/arc/sub.d: Likewise.
|
||
* testsuite/gas/arc/tls-relocs.d: Likewise.
|
||
* testsuite/gas/arc/xor.d: Likewise.
|
||
|
||
2016-01-01 Alan Modra <amodra@gmail.com>
|
||
|
||
Update year range in copyright notice of all files.
|
||
|
||
For older changes see ChangeLog-2015 and testsuite/ChangeLog-2015
|
||
|
||
Copyright (C) 2016 Free Software Foundation, Inc.
|
||
|
||
Copying and distribution of this file, with or without modification,
|
||
are permitted in any medium without royalty provided the copyright
|
||
notice and this notice are preserved.
|
||
|
||
Local Variables:
|
||
mode: change-log
|
||
left-margin: 8
|
||
fill-column: 74
|
||
version-control: never
|
||
End:
|