binutils-gdb/gprof/Makefile.in
Alan Modra 9e9b66a956 bfd/
* Makefile.am (NO_WERROR): Define.
	* warning.m4: New file
	* acinclude.m4: Include warning.m4.
	* configure.in: Invoke AM_BINUTILS_WARNINGS.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
bfd/doc/
	* Makefile.in: Regenerate.
binutils/
	* Makefile.am (NO_WERROR): Define.  Use instead of -Wno-error.
	* configure.in: Include ../bfd/warning.m4 contents.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* doc/Makefile.in: Regenerate.
gas/
	* Makefile.am (NO_WERROR): Define.  Use instead of -Wno-error.
	* acinclude.m4: Include ../bfd/warning.m4.
	* configure.in: Invoke AM_BINUTILS_WARNINGS.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* doc/Makefile.in: Regenerate.
gprof/
	* Makefile.am (NO_WERROR): Define.
	* acinclude.m4: Include ../bfd/warning.m4.
	* configure.in: Invoke AM_BINUTILS_WARNINGS.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
ld/
	* Makefile.am (NO_WERROR): Define.  Use instead of -Wno-error.
	* configure.in: Include ../bfd/warning.m4 contents.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
opcodes/
	* Makefile.am (NO_WERROR): Define.
	* configure.in: Invoke AM_BINUTILS_WARNINGS.
	* Makefile.in: Regenerate.
	* aclocal.m4: Regenerate.
	* configure: Regenerate.
2005-04-14 05:26:44 +00:00

965 lines
33 KiB
Makefile

# Makefile.in generated by automake 1.9.3 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
SOURCES = $(gprof_SOURCES)
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
bin_PROGRAMS = gprof$(EXEEXT)
DIST_COMMON = $(srcdir)/../config.guess $(srcdir)/../config.sub README \
ChangeLog $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
$(top_srcdir)/configure $(am__configure_deps) \
$(srcdir)/gconfig.in $(srcdir)/../mkinstalldirs \
$(top_srcdir)/po/Make-in $(srcdir)/../ltmain.sh \
$(srcdir)/../config.guess $(srcdir)/../config.sub \
$(noinst_HEADERS)
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
$(top_srcdir)/../bfd/warning.m4 $(top_srcdir)/../libtool.m4 \
$(top_srcdir)/../gettext.m4 $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno configure.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = gconfig.h
CONFIG_CLEAN_FILES = po/Makefile.in
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"
binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
PROGRAMS = $(bin_PROGRAMS)
am__objects_1 = basic_blocks.$(OBJEXT) call_graph.$(OBJEXT) \
cg_arcs.$(OBJEXT) cg_dfn.$(OBJEXT) cg_print.$(OBJEXT) \
corefile.$(OBJEXT) gmon_io.$(OBJEXT) gprof.$(OBJEXT) \
hertz.$(OBJEXT) hist.$(OBJEXT) source.$(OBJEXT) \
search_list.$(OBJEXT) symtab.$(OBJEXT) sym_ids.$(OBJEXT) \
utils.$(OBJEXT) i386.$(OBJEXT) alpha.$(OBJEXT) vax.$(OBJEXT) \
tahoe.$(OBJEXT) sparc.$(OBJEXT) mips.$(OBJEXT)
am_gprof_OBJECTS = $(am__objects_1) flat_bl.$(OBJEXT) \
bsd_callg_bl.$(OBJEXT) fsf_callg_bl.$(OBJEXT)
gprof_OBJECTS = $(am_gprof_OBJECTS)
am__DEPENDENCIES_1 =
DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
depcomp =
am__depfiles_maybe =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \
$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
$(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@
SOURCES = $(gprof_SOURCES)
INFO_DEPS = $(srcdir)/gprof.info
TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo
DVIS = gprof.dvi
PDFS = gprof.pdf
PSS = gprof.ps
HTMLS = gprof.html
TEXINFOS = gprof.texi
TEXI2DVI = `if test -f $(top_srcdir)/../texinfo/util/texi2dvi; then \
echo $(top_srcdir)/../texinfo/util/texi2dvi; \
else \
echo texi2dvi; \
fi`
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-exec-recursive install-info-recursive \
install-recursive installcheck-recursive installdirs-recursive \
pdf-recursive ps-recursive uninstall-info-recursive \
uninstall-recursive
man1dir = $(mandir)/man1
NROFF = nroff
MANS = $(man_MANS)
HEADERS = $(noinst_HEADERS)
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
ACLOCAL = @ACLOCAL@
ALLOCA = @ALLOCA@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GMOFILES = @GMOFILES@
GMSGFMT = @GMSGFMT@
GT_NO = @GT_NO@
GT_YES = @GT_YES@
INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
INTLDEPS = @INTLDEPS@
INTLLIBS = @INTLLIBS@
INTLOBJS = @INTLOBJS@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
NO_WERROR = @NO_WERROR@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
POFILES = @POFILES@
POSUB = @POSUB@
RANLIB = @RANLIB@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
WARN_CFLAGS = @WARN_CFLAGS@
XGETTEXT = @XGETTEXT@
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
l = @l@
libdir = @libdir@
libexecdir = @libexecdir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
prefix = @prefix@
program_transform_name = @program_transform_name@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
AUTOMAKE_OPTIONS = cygnus
SUFFIXES = .m
SUBDIRS = po
BASEDIR = $(srcdir)/..
BFDDIR = $(BASEDIR)/bfd
INCDIR = $(BASEDIR)/include
AM_CFLAGS = $(WARN_CFLAGS)
MKDEP = gcc -MM
INCLUDES = -D_GNU_SOURCE -DDEBUG -I../bfd -I$(srcdir)/../include -I$(srcdir)/../bfd -I$(srcdir)/../intl -I../intl -I. -DLOCALEDIR="\"$(datadir)/locale\""
sources = basic_blocks.c call_graph.c cg_arcs.c cg_dfn.c \
cg_print.c corefile.c gmon_io.c gprof.c hertz.c hist.c source.c \
search_list.c symtab.c sym_ids.c utils.c \
i386.c alpha.c vax.c tahoe.c sparc.c mips.c
gprof_SOURCES = $(sources) flat_bl.c bsd_callg_bl.c fsf_callg_bl.c
gprof_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a $(INTLDEPS)
gprof_LDADD = ../bfd/libbfd.la ../libiberty/libiberty.a $(INTLLIBS)
noinst_HEADERS = \
basic_blocks.h call_graph.h cg_arcs.h cg_dfn.h cg_print.h \
corefile.h gmon.h gmon_io.h gmon_out.h gprof.h hertz.h hist.h \
search_list.h source.h sym_ids.h symtab.h utils.h
BUILT_SOURCES = flat_bl.c bsd_callg_bl.c fsf_callg_bl.c
EXTRA_DIST = $(BUILT_SOURCES) bbconv.pl $(man_MANS)
POTFILES = $(sources) $(noinst_HEADERS)
MANCONF = -Dman
TEXI2POD = perl $(srcdir)/../etc/texi2pod.pl
POD2MAN = pod2man --center="GNU" --release="binutils-$(VERSION)" --section=1
info_TEXINFOS = gprof.texi
man_MANS = gprof.1
CLEANFILES = dep.sed DEP DEPA DEP1 DEP2
all: $(BUILT_SOURCES) gconfig.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
.SUFFIXES: .m .c .dvi .html .info .lo .o .obj .pdf .ps .texi
am--refresh:
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
cd $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
gconfig.h: stamp-h1
@if test ! -f $@; then \
rm -f stamp-h1; \
$(MAKE) stamp-h1; \
else :; fi
stamp-h1: $(srcdir)/gconfig.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status gconfig.h
$(srcdir)/gconfig.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_srcdir) && $(AUTOHEADER)
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f gconfig.h stamp-h1
po/Makefile.in: $(top_builddir)/config.status $(top_srcdir)/po/Make-in
cd $(top_builddir) && $(SHELL) ./config.status $@
install-binPROGRAMS: $(bin_PROGRAMS)
@$(NORMAL_INSTALL)
test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)"
@list='$(bin_PROGRAMS)'; for p in $$list; do \
p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
if test -f $$p \
|| test -f $$p1 \
; then \
f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
$(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
else :; fi; \
done
uninstall-binPROGRAMS:
@$(NORMAL_UNINSTALL)
@list='$(bin_PROGRAMS)'; for p in $$list; do \
f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
rm -f "$(DESTDIR)$(bindir)/$$f"; \
done
clean-binPROGRAMS:
@list='$(bin_PROGRAMS)'; for p in $$list; do \
f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
echo " rm -f $$p $$f"; \
rm -f $$p $$f ; \
done
gprof$(EXEEXT): $(gprof_OBJECTS) $(gprof_DEPENDENCIES)
@rm -f gprof$(EXEEXT)
$(LINK) $(gprof_LDFLAGS) $(gprof_OBJECTS) $(gprof_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
.c.o:
$(COMPILE) -c $<
.c.obj:
$(COMPILE) -c `$(CYGPATH_W) '$<'`
.c.lo:
$(LTCOMPILE) -c -o $@ $<
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool
.texi.info:
restore=: && backupdir="$(am__leading_dot)am$$$$" && \
am__cwd=`pwd` && cd $(srcdir) && \
rm -rf $$backupdir && mkdir $$backupdir && \
for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
done; \
cd "$$am__cwd"; \
if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-o $@ $<; \
then \
rc=0; \
cd $(srcdir); \
else \
rc=$$?; \
cd $(srcdir) && \
$$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
fi; \
rm -rf $$backupdir; exit $$rc
.texi.dvi:
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
$(TEXI2DVI) $<
.texi.pdf:
TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
$(TEXI2PDF) $<
.texi.html:
rm -rf $(@:.html=.htp)
if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-o $(@:.html=.htp) $<; \
then \
rm -rf $@; \
if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
else \
if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
exit 1; \
fi
$(srcdir)/gprof.info: gprof.texi
gprof.dvi: gprof.texi
gprof.pdf: gprof.texi
gprof.html: gprof.texi
.dvi.ps:
$(DVIPS) -o $@ $<
uninstall-info-am:
$(PRE_UNINSTALL)
@if (install-info --version && \
install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
done; \
else :; fi
@$(NORMAL_UNINSTALL)
@list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
(if cd "$(DESTDIR)$(infodir)"; then \
echo " rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9])"; \
rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
else :; fi); \
done
dist-info: $(INFO_DEPS)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; \
for base in $$list; do \
case $$base in \
$(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$base; then d=.; else d=$(srcdir); fi; \
for file in $$d/$$base*; do \
relfile=`expr "$$file" : "$$d/\(.*\)"`; \
test -f $(distdir)/$$relfile || \
cp -p $$file $(distdir)/$$relfile; \
done; \
done
mostlyclean-aminfo:
-rm -rf gprof.aux gprof.cp gprof.cps gprof.fn gprof.fns gprof.ky gprof.kys \
gprof.log gprof.pg gprof.pgs gprof.tmp gprof.toc gprof.tp \
gprof.tps gprof.vr gprof.vrs gprof.dvi gprof.pdf gprof.ps \
gprof.html
maintainer-clean-aminfo:
@list='$(INFO_DEPS)'; for i in $$list; do \
i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
done
clean-info: mostlyclean-aminfo
install-man1: $(man1_MANS) $(man_MANS)
@$(NORMAL_INSTALL)
test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)"
@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
for i in $$l2; do \
case "$$i" in \
*.1*) list="$$list $$i" ;; \
esac; \
done; \
for i in $$list; do \
if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
else file=$$i; fi; \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
case "$$ext" in \
1*) ;; \
*) ext='1' ;; \
esac; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
inst=`echo $$inst | sed -e 's/^.*\///'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
$(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
done
uninstall-man1:
@$(NORMAL_UNINSTALL)
@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
for i in $$l2; do \
case "$$i" in \
*.1*) list="$$list $$i" ;; \
esac; \
done; \
for i in $$list; do \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
case "$$ext" in \
1*) ;; \
*) ext='1' ;; \
esac; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
inst=`echo $$inst | sed -e 's/^.*\///'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
done
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $$MAKEFLAGS; amf=$$2; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) gconfig.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) gconfig.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) gconfig.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) gconfig.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
check-am:
check: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS) gconfig.h
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \
test -z "$$dir" || $(mkdir_p) "$$dir"; \
done
install: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-recursive
clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-hdr distclean-libtool distclean-tags
dvi: dvi-recursive
dvi-am: $(DVIS)
html: html-recursive
html-am: $(HTMLS)
info: info-recursive
info-am: $(INFO_DEPS)
install-data-am: install-data-local install-man
install-exec-am: install-binPROGRAMS
install-info: install-info-recursive
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
test -z "$(infodir)" || $(mkdir_p) "$(DESTDIR)$(infodir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
list='$(INFO_DEPS)'; \
for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
esac; \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
$$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
if test -f $$ifile; then \
relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
$(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
else : ; fi; \
done; \
done
@$(POST_INSTALL)
@if (install-info --version && \
install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
relfile=`echo "$$file" | sed 's|^.*/||'`; \
echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
done; \
else : ; fi
install-man: install-man1
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \
mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am: $(PDFS)
ps: ps-recursive
ps-am: $(PSS)
uninstall-am: uninstall-binPROGRAMS uninstall-man
uninstall-info: uninstall-info-recursive
uninstall-man: uninstall-man1
.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
check-am clean clean-binPROGRAMS clean-generic clean-info \
clean-libtool clean-recursive ctags ctags-recursive dist-info \
distclean distclean-compile distclean-generic distclean-hdr \
distclean-libtool distclean-recursive distclean-tags dvi \
dvi-am html html-am info info-am install install-am \
install-binPROGRAMS install-data install-data-am \
install-data-local install-exec install-exec-am install-info \
install-info-am install-man install-man1 install-strip \
installcheck installcheck-am installdirs installdirs-am \
maintainer-clean maintainer-clean-aminfo \
maintainer-clean-generic maintainer-clean-recursive \
mostlyclean mostlyclean-aminfo mostlyclean-compile \
mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \
pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
uninstall-binPROGRAMS uninstall-info-am uninstall-man \
uninstall-man1
diststuff: $(BUILT_SOURCES) info $(man_MANS)
.m.c:
awk -f $(srcdir)/gen-c-prog.awk > ./$*.c \
FUNCTION=`(echo $*|sed -e 's,.*/,,g' -e 's/_bl//')`_blurb \
FILE=$*.m $(srcdir)/$*.m
po/POTFILES.in: @MAINT@ Makefile
for f in $(POTFILES); do echo $$f; done | LC_COLLATE= sort > tmp \
&& mv tmp $(srcdir)/po/POTFILES.in
# Build the man page from the texinfo file
# The sed command removes the no-adjust Nroff command so that
# the man output looks standard.
gprof.1: $(srcdir)/gprof.texi
touch $@
-$(TEXI2POD) $(MANCONF) -Dgprof < $(srcdir)/gprof.texi > gprof.pod
-($(POD2MAN) gprof.pod | \
sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || \
(rm -f $@.T$$$$ && exit 1)
rm -f gprof.pod
Makefile: $(BFDDIR)/configure.in
# We want install to imply install-info as per GNU standards, despite the
# cygnus option.
install-data-local: install-info
# Targets to rebuild dependencies in this Makefile.
# Have to get rid of DEP1 here so that "$?" later includes all sources.
DEP: dep.sed $(gprof_SOURCES) $(noinst_HEADERS) gconfig.h
rm -f DEP1
$(MAKE) MKDEP="$(MKDEP)" DEP1
sed -f dep.sed < DEP1 > DEPA
echo '# IF YOU PUT ANYTHING HERE IT WILL GO AWAY' >> DEPA
if grep ' /' DEPA > /dev/null 2> /dev/null; then \
echo 'make DEP failed!'; exit 1; \
else \
mv -f DEPA $@; \
fi
DEP1: $(gprof_SOURCES)
echo '# DO NOT DELETE THIS LINE -- mkdep uses it.' > DEP2
echo '# DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY.' >> DEP2
$(MKDEP) $(INCLUDES) $(CFLAGS) $? >> DEP2
mv -f DEP2 $@
dep.sed: dep-in.sed config.status
objdir=`pwd`; \
sed <$(srcdir)/dep-in.sed >dep.sed \
-e 's!@INCDIR@!$(INCDIR)!' \
-e 's!@BFDDIR@!$(BFDDIR)!' \
-e 's!@SRCDIR@!$(srcdir)!' \
-e "s!@OBJDIR@!$${objdir}!" \
-e 's!@TOPDIR@!'`echo $(srcdir) | sed -e s,/gprof$$,,`'!'
dep: DEP
sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < Makefile > tmp-Makefile
cat DEP >> tmp-Makefile
$(SHELL) $(srcdir)/../move-if-change tmp-Makefile Makefile
dep-in: DEP
sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.in > tmp-Makefile.in
cat DEP >> tmp-Makefile.in
$(SHELL) $(srcdir)/../move-if-change tmp-Makefile.in $(srcdir)/Makefile.in
dep-am: DEP
sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.am > tmp-Makefile.am
cat DEP >> tmp-Makefile.am
$(SHELL) $(srcdir)/../move-if-change tmp-Makefile.am $(srcdir)/Makefile.am
.PHONY: dep dep-in dep-am
# DO NOT DELETE THIS LINE -- mkdep uses it.
# DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY.
basic_blocks.o: basic_blocks.c $(INCDIR)/libiberty.h \
$(INCDIR)/ansidecl.h gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \
$(INCDIR)/fopen-same.h $(INCDIR)/filenames.h ../bfd/bfd.h \
$(INCDIR)/symcat.h gconfig.h $(INCDIR)/bin-bugs.h basic_blocks.h \
corefile.h gmon_io.h gmon_out.h search_list.h source.h \
symtab.h sym_ids.h
call_graph.o: call_graph.c gprof.h $(BFDDIR)/sysdep.h \
$(INCDIR)/ansidecl.h ../bfd/config.h $(INCDIR)/fopen-same.h \
$(INCDIR)/filenames.h ../bfd/bfd.h $(INCDIR)/symcat.h \
gconfig.h $(INCDIR)/bin-bugs.h search_list.h source.h \
symtab.h cg_arcs.h call_graph.h corefile.h gmon_io.h \
gmon_out.h sym_ids.h
cg_arcs.o: cg_arcs.c $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \
gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h $(INCDIR)/fopen-same.h \
$(INCDIR)/filenames.h ../bfd/bfd.h $(INCDIR)/symcat.h \
gconfig.h $(INCDIR)/bin-bugs.h search_list.h source.h \
symtab.h call_graph.h cg_arcs.h cg_dfn.h cg_print.h \
utils.h sym_ids.h
cg_dfn.o: cg_dfn.c $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \
gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h $(INCDIR)/fopen-same.h \
$(INCDIR)/filenames.h ../bfd/bfd.h $(INCDIR)/symcat.h \
gconfig.h $(INCDIR)/bin-bugs.h search_list.h source.h \
symtab.h cg_arcs.h cg_dfn.h utils.h
cg_print.o: cg_print.c $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \
gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h $(INCDIR)/fopen-same.h \
$(INCDIR)/filenames.h ../bfd/bfd.h $(INCDIR)/symcat.h \
gconfig.h $(INCDIR)/bin-bugs.h search_list.h source.h \
symtab.h cg_arcs.h cg_print.h hist.h utils.h corefile.h
corefile.o: corefile.c $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \
gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h $(INCDIR)/fopen-same.h \
$(INCDIR)/filenames.h ../bfd/bfd.h $(INCDIR)/symcat.h \
gconfig.h $(INCDIR)/bin-bugs.h search_list.h source.h \
symtab.h corefile.h
gmon_io.o: gmon_io.c gprof.h $(BFDDIR)/sysdep.h $(INCDIR)/ansidecl.h \
../bfd/config.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \
../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h $(INCDIR)/bin-bugs.h \
search_list.h source.h symtab.h cg_arcs.h basic_blocks.h \
corefile.h call_graph.h gmon_io.h gmon_out.h gmon.h \
hertz.h hist.h $(INCDIR)/libiberty.h
gprof.o: gprof.c $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \
gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h $(INCDIR)/fopen-same.h \
$(INCDIR)/filenames.h ../bfd/bfd.h $(INCDIR)/symcat.h \
gconfig.h $(INCDIR)/bin-bugs.h search_list.h source.h \
symtab.h basic_blocks.h call_graph.h cg_arcs.h cg_print.h \
corefile.h gmon_io.h hertz.h hist.h sym_ids.h $(INCDIR)/demangle.h
hertz.o: hertz.c gprof.h $(BFDDIR)/sysdep.h $(INCDIR)/ansidecl.h \
../bfd/config.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \
../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h $(INCDIR)/bin-bugs.h \
hertz.h
hist.o: hist.c $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \
gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h $(INCDIR)/fopen-same.h \
$(INCDIR)/filenames.h ../bfd/bfd.h $(INCDIR)/symcat.h \
gconfig.h $(INCDIR)/bin-bugs.h search_list.h source.h \
symtab.h corefile.h gmon_io.h gmon_out.h hist.h sym_ids.h \
utils.h
source.o: source.c gprof.h $(BFDDIR)/sysdep.h $(INCDIR)/ansidecl.h \
../bfd/config.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \
../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h $(INCDIR)/bin-bugs.h \
$(INCDIR)/libiberty.h search_list.h source.h
search_list.o: search_list.c $(INCDIR)/libiberty.h \
$(INCDIR)/ansidecl.h gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \
$(INCDIR)/fopen-same.h $(INCDIR)/filenames.h ../bfd/bfd.h \
$(INCDIR)/symcat.h gconfig.h $(INCDIR)/bin-bugs.h search_list.h
symtab.o: symtab.c gprof.h $(BFDDIR)/sysdep.h $(INCDIR)/ansidecl.h \
../bfd/config.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \
../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h $(INCDIR)/bin-bugs.h \
search_list.h source.h symtab.h cg_arcs.h corefile.h
sym_ids.o: sym_ids.c $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \
$(INCDIR)/safe-ctype.h gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \
$(INCDIR)/fopen-same.h $(INCDIR)/filenames.h ../bfd/bfd.h \
$(INCDIR)/symcat.h gconfig.h $(INCDIR)/bin-bugs.h search_list.h \
source.h symtab.h cg_arcs.h sym_ids.h
utils.o: utils.c $(INCDIR)/demangle.h $(INCDIR)/libiberty.h \
$(INCDIR)/ansidecl.h gprof.h $(BFDDIR)/sysdep.h ../bfd/config.h \
$(INCDIR)/fopen-same.h $(INCDIR)/filenames.h ../bfd/bfd.h \
$(INCDIR)/symcat.h gconfig.h $(INCDIR)/bin-bugs.h search_list.h \
source.h symtab.h cg_arcs.h utils.h
i386.o: i386.c gprof.h $(BFDDIR)/sysdep.h $(INCDIR)/ansidecl.h \
../bfd/config.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \
../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h $(INCDIR)/bin-bugs.h \
search_list.h source.h symtab.h cg_arcs.h corefile.h \
hist.h
alpha.o: alpha.c gprof.h $(BFDDIR)/sysdep.h $(INCDIR)/ansidecl.h \
../bfd/config.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \
../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h $(INCDIR)/bin-bugs.h \
search_list.h source.h symtab.h cg_arcs.h corefile.h \
hist.h
vax.o: vax.c gprof.h $(BFDDIR)/sysdep.h $(INCDIR)/ansidecl.h \
../bfd/config.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \
../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h $(INCDIR)/bin-bugs.h \
search_list.h source.h symtab.h cg_arcs.h corefile.h \
hist.h
tahoe.o: tahoe.c gprof.h $(BFDDIR)/sysdep.h $(INCDIR)/ansidecl.h \
../bfd/config.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \
../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h $(INCDIR)/bin-bugs.h \
search_list.h source.h symtab.h cg_arcs.h corefile.h \
hist.h
sparc.o: sparc.c gprof.h $(BFDDIR)/sysdep.h $(INCDIR)/ansidecl.h \
../bfd/config.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \
../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h $(INCDIR)/bin-bugs.h \
search_list.h source.h symtab.h cg_arcs.h corefile.h \
hist.h
mips.o: mips.c gprof.h $(BFDDIR)/sysdep.h $(INCDIR)/ansidecl.h \
../bfd/config.h $(INCDIR)/fopen-same.h $(INCDIR)/filenames.h \
../bfd/bfd.h $(INCDIR)/symcat.h gconfig.h $(INCDIR)/bin-bugs.h \
search_list.h source.h symtab.h cg_arcs.h corefile.h \
hist.h
flat_bl.o: flat_bl.c $(INCDIR)/ansidecl.h
bsd_callg_bl.o: bsd_callg_bl.c $(INCDIR)/ansidecl.h
fsf_callg_bl.o: fsf_callg_bl.c $(INCDIR)/ansidecl.h
# IF YOU PUT ANYTHING HERE IT WILL GO AWAY
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: