mirror/binutils-gdb
2
0
Fork 0
mirror of https://sourceware.org/git/binutils-gdb.git synced 2024-12-03 04:12:10 +08:00
Code Issues Packages Projects Releases Wiki Activity
514d95fad2
binutils-gdb/gas/ChangeLog
Ken Raeburn c5d4bc889f bump main trunk to version 2.0.1
1993-03-09 15:44:37 +00:00

1493 lines
54 KiB
Plaintext
Raw Blame History

Tue Mar 9 07:43:01 1993 Ken Raeburn (raeburn@cygnus.com)
* version.c: Bump to version 2.0.1.
Tue Mar 9 07:40:06 1993 Ian Lance Taylor (ian@cygnus.com)
* write.c (chain_frchains_together): Check that seg_info (section)
is not NULL.
(write_object_file): Call obj_frob_file after setting the symbols,
not before.
Mon Mar 8 14:57:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-i386.h (TC_COUNT_RELOC): Look for fx_addsy only.
Fri Mar 5 09:05:55 1993 Ian Lance Taylor (ian@cygnus.com)
* read.h: Define stringer here.
read.c, config/obj-ieee.c, config/obj-tcm88k.c: Not any of these
places.
Thu Mar 4 11:52:23 1993 Steve Chamberlain (sac@thepub.cygnus.com)
* read.c (s_space): Multiply repeat count by mult, not fill.
Thu Mar 4 05:20:42 1993 Ken Raeburn (raeburn@cygnus.com)
* read.c: Include ctype.h.
Wed Mar 3 10:41:46 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
Patches from Eric Youngdale:
* make-gas.com: Find obstack.obj if it's not in the current
directory.
* read.c (s_ignore): Don't declare is_end_of_line. It's
redundant, and triggers a VMS gcc compiler bug.
* write.c (write_object_file): Macro SUB_SEGMENT_ALIGN now takes
current segment as an argument. (Ignored in all cases but VMS.)
All callers and definitions changed.
Tue Mar 2 11:56:19 1993 Ian Lance Taylor (ian@cygnus.com)
* listing.c: Cleaned up a bit, added prototypes, made NO_LISTING
case compile again.
Tue Mar 2 08:53:34 1993 Ken Raeburn (raeburn@cygnus.com)
* config/tc-m68k.c (isbyte): Accept all values from -255 to +255,
so "~0x80" won't be rejected.
* config/obj-elf.c: No longer include elf/reloc.h.
(obj_elf_section): Set SEC_READONLY and SEC_CODE for text section.
(obj_elf_stab, obj_elf_desc): Deleted do-nothing and commented-out
routines.
(obj_elf_xstab): New routine.
(obj_elf_set_size): Call as_warn, not fprintf. Pass desired
argument to s_ignore. Put "#if 0" around unused code.
(obj_pseudo_table): Use s_ignore instead of do-nothing routines.
Call elf_xstabs for .stabs and .xstabs operators.
* config/tc-sparc.h (TARGET_FORMAT) [OBJ_ELF]: Now "elf32-sparc".
* write.c (relax_and_size_seg): Set SEC_RELOC only if fixups are
present.
* configure.in: mips-bsd configuration was missing format spec.
Should use aout.
* Makefile.in (Makefile): Depends on configure.in.
* config/tc-mips.c (append_insn): Don't check for alignment of
frag in memory; alignment of instructions in section is a separate
matter.
* config/tc-mips.c (macro_build_lui): Fix some assumptions of ANSI
C availability.
* listing.h: Always provide function declarations, not macros, so
pcc won't lose.
Tue Mar 2 00:50:43 1993 John Gilmore (gnu@cygnus.com)
* CONTRIBUTORS: Update Gilmore entry.
Wed Feb 24 14:58:19 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* frags.c (frag_init): New function.
(zero_address_frag, bss_address_frag): Now initialized at run
time.
* as.c (main): Call frag_init.
Wed Feb 24 10:32:42 1993 Ian Lance Taylor (ian@cygnus.com)
* app.c (do_scrub_next_char): In LEX_IS_LINE_COMMENT_START case:
Don't unget ch2 if we didn't get it.
Wed Feb 24 04:14:07 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com)
* doc/Makefile.in (TEXIDIR): Updated for new layout.
* config/tc-sparc.c (s_common): Add support for ELF version.
(tc_gen_reloc) [BFD_ASSEMBLER]: New function.
* config/tc-sparc.h (TARGET_ARCH, TARGET_FORMAT) [BFD_ASSEMBLER]:
New macros.
(md_convert_frag): New macro.
* config/tc-m68k.c (m68k_ip): For PC-relative addressing of a
symbol, fix the offset so "+2" isn't required.
* config/tc-i960.c (line_comment_chars, line_separator_chars):
Define as common/bss.
(op_hash, reg_hash, areg_hash, iclasses_seen, br_cnt): Default C
initializers are sufficient.
* config/obj-aout.h [BFD_ASSEMBLER]: Include libaout.h from bfd.
(TARGET_FORMAT) [BFD_ASSEMBLER]: Default to "a.out".
(S_SET_*, S_GET_*, obj_frob_symbol) [BFD_ASSEMBLER]: New macros.
(S_SET_TYPE) [!BFD_ASSEMBLER]: New macro.
* config/obj-aout.c: Use PARAMS macro for declarations. Remove
"IGNORE_DEBUG" conditional, since both branches are identical.
Use S_SET_TYPE, S_GET_TYPE, and S_GET_DESC instead of directly
referencing symbol structure members.
(obj_aout_frob_symbol) [BFD_ASSEMBLER]: New function.
* as.h (struct frag): Reordered a couple of fields for better
packing.
* write.c (record_alignment) [BFD_ASSEMBLER]: Record it in the
section info.
(write_contents) [BFD_ASSEMBLER]: New function.
(write_object_file) [BFD_ASSEMBLER]: Always handle -R here. Call
fix_new with BFD_RELOC_NONE instead of 0 or NO_RELOC. Call
obj_frob_file, obj_frob_symbol, tc_frob_symbol if defined.
(fixup_segment): Make sure common-section symbols get treated the
same as undefined symbols.
(fix_new) [BFD_ASSEMBLER]: Argument r_type is of type
bfd_reloc_code_real_type. Use seg_fix_{root,tail}P derived from
section info.
* write.h (fix_new): Update prototype.
* tc.h (md_operand, md_convert_frag, tc_headers_hook,
md_section_align, md_undefined_symbol): Don't provide prototypes
if these are defined as macros.
(md_convert_frag) [BFD_ASSEMBLER]: BFD version needs bfd and
section passed.
* symbols.c (symbol_new): Argument NAME is now pointer to const.
Simplified STRIP_UNDERSCORE code. Remove assumptions about null
pointers in freshly allocated storage. [BFD_ASSEMBLER]: Get new
BFD symbol.
(colon): Display other/desc fields of redefined symbol only if
S_GET_OTHER and S_GET_DESC are defined.
(symbol_make): Argument NAME is now pointer to const.
(symbol_find, symbol_find_base): Likewise.
(S_IS_*, S_GET_*, S_SET_*) [BFD_ASSEMBLER]: New functions.
* symbols.h: Fix prototypes for new const arguments. Add
prototypes for BFD_ASSEMBLER S_* functions.
* subsegs.c (subseg_change) [BFD_ASSEMBLER]: BFD version of code
for changing to an existing section.
(subseg_new_rest) [BFD_ASSEMBLER]: Split off from subseg_new,
called by subseg_new and subseg_set.
(subseg_new) [BFD_ASSEMBLER]: Rewritten to change to new section,
given section name and subseg number.
(subseg_set) [BFD_ASSEMBLER]: New function; change to a possibly
new section/subsection.
* read.c: Don't include ctype.h.
(cons) [BFD_ASSEMBLER]: For undefined symbols, use BFD_RELOC_32
for now; should be machine-dependent.
* configure.in: Accept *-*-elf and *-*-solaris* as ELF format
targets, forcing BFD use.
Wed Feb 17 18:59:03 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-sparc.c: Use PARAMS macro for static function
declarations. Use BFD_RELOC_ macros everywhere, with
compatibility macros declared for non-BFD mode.
(struct sparc_it) [BFD_ASSEMBLER]: Use bfd_reloc_code_real_type
instead of enum reloc_type.
(emit_sparc_reloc): Commented-out function deleted.
(md_convert_frag): Deleted.
(tc_aout_pre_write_hook): Don't define for BFD_ASSEMBLER.
(md_apply_fix): Changed calling sequence (conditionally) for BFD
version.
* config/tc-sparc.h (md_convert_frag): New macro.
* config/obj-aout.c (obj_aout_stab): Refer to undefined_section,
not SEG_UNKNOWN. Use S_SET_TYPE, S_GET_TYPE, S_GET_DESC instead
of referencing fields directly.
* write.c (cvt_frag_to_fill): New function; extracted from
write_object_file.
(write_object_file) [! BFD_ASSEMBLER]: Call it.
(relax_and_size_seg) [BFD_ASSEMBLER]: New function; relax section
and set its size and flags.
* struc-symbol.h (struct symbol) [BFD_ASSEMBLER]: Replace some
fields with BFD equivalents. Turn on back-pointers, and add
target-specific fields at end.
Thu Feb 11 09:20:37 1993 Ian Lance Taylor (ian@cygnus.com)
* config/obj-coffbfd.c (fill_section): Don't set vaddr here.
(write_object_file): Set it here instead, so that fixup_segment
can see the correct value.
Mon Feb 8 13:56:17 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* write.c (write_object_file): Check for errors and warnings and
bail out before processing contents.
(chain_frchains_together_1): New function, does most of the work
of remove_subsegs.
(chain_frchains_together) [BFD_ASSEMBLER]: New function.
(remove_subsegs) [! BFD]: Call it.
(write_object_file) [BFD_ASSEMBLER]: Converted to use BFD
structures and routines.
* config/obj-elf.*: New files.
* config/mips.mt, config/rs6000.mt: Deleted.
* config/h8300.mt: Don't specify compiler here.
* config/z8k.mt: The z8k code depends on the z8k opcode table,
not the h8300 one.
* config/tc-z8k.h: Comment fix.
* write.c: Reordered some functions for better inlining.
(fixup_segment): Linkrelax code is no longer conditional on
TC_I960.
Thu Feb 4 12:45:16 1993 Steve Chamberlain (sac@thepub.cygnus.com)
* config/{h8500.mt, tc-h8500.c, tc-h8500.h, obj-coffbfd.c,
obj-coffbfd.h}: support for the H8/500
Wed Feb 3 19:28:18 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/obj-vms.h (SUB_SEGMENT_ALIGN): Define VMS version here.
* write.c (write_object_file): Not here.
(fix_new): Initialize fx_addnumber.
* listing.c: Don't include target-cpu.h explicitly, since as.h
includes it.
Thu Jan 28 00:35:40 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com)
* write.h [BFD_ASSEMBLER]: Don't declare next_object_file_charP,
*_fix_root, *_fix_tail, seg_fix_rootP, seg_fix_tailP.
(struct fix): Reordered fields for compactness and efficiency.
Converted some logical fields to 1-bit fields.
* config/obj-aout.h: Use PARAMS.
[BFD_ASSEMBLER]: Don't define/declare AOUT_MACHTYPE, seg_N_TYPE,
N_TYPE_seg, DEFAULT_MAGIC_NUMBER_FOR_OBJECT_FILE.
* read.c: Don't include listing.h; as.h includes it. Removed
DONTDEF code.
[BFD_ASSEMBLER]: Include subsegs.h.
(old_buffer, new_broken_words): Default initialization is
sufficient.
* output-file.c [BFD_ASSEMBLER]: Include bfd.h, default TARGET_MACH
to 0, define stdoutput.
(output_file_create) [BFD_ASSEMBLER]: Call bfd_perror on failure.
Call bfd_set_arch_mach.
(output_file_close) [BFD_ASSEMBLER]: Call bfd_close, not
bfd_close_all_done. Call bfd_perror on failure.
(output_file_append) [BFD_ASSEMBLER]: Don't define.
* config/m68kcoff.mt (LOCAL_LOADLIBES): Delete definition.
* subsegs.h (segment_info_type): Always define. Omit field scnhdr
if not MANY_SEGMENTS. Define new field bfd_section if
BFD_ASSEMBLER.
(seg_info): New macro.
* expr.c, input-scrub.c: Use PARAMS macro. Deleted unused
variables, and some irrelevant comments.
* Makefile.in (ALL_CFLAGS): Include $(BFDDEF).
(LIBS): Include $(BFDLIB). Don't bother with $(CLIB).
* configure.in: Permit --with-bfd-assembler now, with a warning.
Variable need_bfd is now a boolean, as is new variable bfd_gas.
Set BFDDEF and BFDLIB in Makefile when appropriate.
* as.c: Removed "#ifdef DONTDEF" and "#ifdef comment" code.
(main): Refer to flag_always_generate_output instead of
flagseen['Z'].
* as.c (main) [BFD_ASSEMBLER]: Open output bfd.
(*_section) [BFD_ASSEMBLER]: Define them.
(perform_an_assembly_pass) [BFD_ASSEMBLER]: Initialize them, and
set section flags when appropriate.
* as.h (SEG_NORMAL) [BFD_ASSEMBLER]: Require that the specified
section is not absolute, undefined, or an assembler internal one.
(absolute_section, undefined_section): Always define.
* expr.c, read.c, symbols.c: Refer to *_section, not SEG_*; break
switch statements into if-else trees.
* symbols.c [MANY_SEGMENTS]: Deleted redundant definitions of
SEG_BSS and SEG_DATA.
* as.h (frag_now_fix): New macro.
* symbols.c (colon): Use it.
Wed Jan 27 21:43:53 PST 1993 Ralph Campbell (ralphc@pyramid.com)
* config/tc-mips.c: Added mips support for mips-dec-bsd.
* config/tc-mips.h: Added mips support for mips-dec-bsd.
* config/ho-mipsbsd.h: Added mips support for mips-dec-bsd.
* config/mips-opcode.h: Added mips support for mips-dec-bsd.
* configure.in: Added mips support for mips-dec-bsd.
* atof-generic.c: Define TRUE and FALSE if not defined.
Thu Jan 21 12:48:19 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* version.c: Bumped version number to 1.93.05.
Wed Jan 20 17:11:53 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/obj-coff.c (obj_emit_relocations): Don't use #elif.
(obj_emit_lineno): Don't need return at end of void function.
(obj_symbol_new_hook): Ditto.
* config/tc-m68k.c: Removed some unused code.
(tc_aout_fix_to_chars): Array nbytes_r_length is now const.
* config/tc-m68k.h (TC_COUNT_RELOC): Don't emit reloc if only
offset field is set.
Fri Jan 8 05:44:49 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-sparc.c (architecture_requested, warn_on_bump,
md_relax_table): Use default zero initialization.
(s_reserve): Since SEG_E2 is equivalent to SEG_BSS, just use the
latter, instead of selecting with preprocessor conditionals.
Thu Jan 7 08:58:21 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
* configure.in: recognise all sparclite variants
Thu Jan 7 05:25:25 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* read.c (s_data) [!BFD_ASSEMBLER]: Fix typo in 4 Jan change --
accidentally changed to use subseg_change where it should have
been subseg_new.
Tue Jan 5 08:42:16 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
* expr.c (operand): If character other than comma or newline is a
logical end-of-line character, use the newline case.
From Eric Youngdale:
(operand): Set X_add_number field for floating-point numbers.
(operand): Treat zero byte as end-of-operand.
* configure.in (per-target): Look for with_bfd_assembler option.
For now, only accept "no", until the merge is done.
Merged changes from Eric Youngdale (youngdale@v6550c.nrl.navy.mil):
* as.c, flonum-konst.c, hex-value.c, input-file.c, version.c,
config/obj-aout.h, config/obj-vms.c: VMS -> HO_VMS.
* read.c: Finish conversion to S_* macros in the VMS only
parts of the program. Add "const" modifier to hex_value.
* as.c, read.c, symbols.c, write.c: Change "ifdef VMS" to
"ifdef OBJ_VMS".
* expr.c: Add "const" modifier to hex_value.
* symbols.c: Finish conversion to S_* macros in the VMS only
parts of the program. Add "const" modifier to
md_[long,short]_jump_size. Remove declaration of const_flag
(which will be declared in obj-vms.h).
* write.c: Add "const" modifier to md_[long,short]_jump_size.
Fix arguments to VMS_write_object_file.
* config-gas.com: New file. Script for VMS systems to set up the
configuration to build gas for VMS, and create config.status.
* make-gas.com: Redone to work with new scheme.
* obj-vms.c: Patch to fix bug where we were not correctly parsing the
stabs directives.
* obj-vms.c: Define macros COPY_LONG and COPY_SHORT which
will swap bytes if needed on a big endian system. Use throughout
as needed.
* obj-vms.c (obj_aout_stab): Add code to generate listing file.
* obj-vms.c (VMS_typedef_parse): Add alias to correctly handle certain
types of malformed stabs. Change parsing algorithm so that we are
more certain of having all of the information that we need on hand.
* obj-vms.c (final_forward_reference): New function, used to help
resolve the data types of as many struct elements as possible
when some part of the struct is not fully defined by the compiler.
* obj-vms.c (VMS_LSYM_Parse): Correctly handle case of continuation
stabs directives.
* obj-vms.c (VMS_write_object_file): Define all vtable psects
as symbols as well in the object file. Look for external functions
that start with "__vt.", and turn them into variables, since the
g++ compiler is incapable of doing this.
* tc-vax.c: Add '1' option for backward compatibility with older GCC
versions.
* bignum-copy.c (bignum_copy): Fix bug where we pad with zeroes.
* input-scrub.c (as_where): Fix bug where as would crash if we did not
have the name of the source file yet.
* config/ho-vms.h: define HO_VMS, not HO_VAX.
Mon Jan 4 05:17:26 1993 Ken Raeburn (raeburn@cygnus.com)
* read.c (s_data): Always use "data_section", since it'll map to
SEG_DATA or SEG_E1 if needed.
(s_lcomm): Likewise with bss_section.
(s_fill): Use memset, not bzero.
Thu Dec 31 04:29:27 1992 Ken Raeburn (raeburn@kr-pc.cygnus.com)
* read.c: Deleted some code under "#ifdef DONTDEF" that was for
handling GDB symbol table data.
* config/obj-aout.h (segment_name): Delete definition.
(seg_name): Delete declaration.
* config/obj-bout.h (segment_name, seg_name): Ditto.
* config/obj-vms.h (segment_name, seg_name): Ditto.
* config/obj-coff.h (segment_name): Ditto.
* config/obj-coffbfd.h (segment_name): Ditto.
* Changes for BFD_ASSEMBLER:
* obj.h (obj_crawl_symbol_chain): Declare only if not
BFD_ASSEMBLER.
(obj_header_append, obj_pre_write_hook): Ditto.
* as.h (stdoutput): New var, defined only if BFD_ASSEMBLER.
(segT) [BFD_ASSEMBLER]: New typedef for "asection *".
(segment_name) If BFD_ASSEMBLER, look up BFD section name;
otherwise, use seg_name array.
(seg_name): Declare only if not BFD_ASSEMBLER.
(section_alignment): Declare only if not BFD_ASSEMBLER.
(big_section, reg_section, pass1_section, diff_section,
absent_section, text_section, data_section, bss_section): If
BFD_ASSEMBLER, declare as variables; otherwise, declare as macros,
mapping to segT enum values.
(tc_aout_fix_to_chars, next_object_file_charP): Force parse errors
if these are used or defined, if BFD_ASSEMBLER.
(subseg_set, subseg_new) [BFD_ASSEMBLER]: Functionality of old
subseg_new split into two functions.
(SEG_NORMAL): For BFD_ASSEMBLER, always return true, for now.
* as.h (volatile): Don't define if already defined.
(had_errors, had_warnings): Provide prototypes for ANSI C even if
NO_STDARG.
(as_bad, as_fatal, as_tsktsk, as_warn): For GNU C version 2,
declare with format attribute for -Wformat checking.
Wed Dec 30 10:18:57 1992 Ian Lance Taylor (ian@cygnus.com)
* app.c, config/tc-*.c: Don't include read.h, since it is already
included by as.h.
* These are based on patches from Minh Tran-le
<mtranle@paris.intellicorp.com>.
* configure.in (i[34]86-ibm-aix*): Accept i486 for host. Use
obj_format coffbfd and gas_target i386coff for target.
(i[34]86-*-isc*): New host (uses sysv).
* config/i386aix.mt: Removed (no longer used).
* config/mh-i386aix (RANLIB): Use true rather than /bin/true.
(MINUS_G): Removed.
(LDFLAGS): Added, defined as -shlib.
* config/te-i386aix.h (REVERSE_SORT_RELOCS): Undefine.
* config/te-sco386.h (LOCAL_LABEL): Don't define.
(DOT_LABEL_PREFIX): Define.
* expr.c (operand): If DOT_LABEL_PREFIX, use .L0\001 as a label
name rather than L0\001.
* read.c (s_lcomm): Make a frag in SEG_BSS rather than using
local_bss_counter.
* symbols.c, symbols.h (local_bss_counter): Removed.
* write.c (write_object_file): bss no longer uses
local_bss_counter. Pass correct data and bss size to
VMS_write_object_file.
* config/obj-vms.c (VMS_write_object_file): Accept bss size as
argument, rather than using local_bss_counter.
* config/tc-m88k.c (s_bss): Don't use local_bss_counter.
* config/tc-sparc.c (s_reserve): Don't use local_bss_counter.
* config/obj-coffbfd.c (had_lineno, had_reloc): Removed.
(size_section): Restored sanity check.
(do_relocs_for): Base section address on s_paddr rather than
computing it. Adjust a29k R_IHIHALF special case to account for
section paddr (used to require paddr to be zero). If there are no
reclos, set s_relptr to 0. Set relocation size in object_headers.
(fill_section): Always set s_vaddr here, removing
ZERO_BASED_SEGMENTS case. Force s_scnptr for bss to 0. Don't set
NOLOAD for i386 .bss, because it confuses the SVR3 native linker.
Set STYP_INFO for .comment.
(coff_header_append): Use object headers and H_{SET,GET}_* macros.
Make aouthdr writing depend on OBJ_COFF_OMIT_OPTIONAL_HEADER.
(crawl_symbols): Handle 8 character section name correctly. Use
H_{SET,GET}_* macros.
(do_linenos_for): Set lineno size in object_headers.
(write_object_file): Use H_{SET,GET}_* macros. Don't bother to
set s_vaddr here. If string_byte_count remains 4, set it back to
0, and only write strings out if there are some. Call
fill_section before do_relocs_for and do_linenos_for.
(obj_coff_section): Handle optional quoted second argument giving
section characteristics.
(obj_coff_bss): Added to handle .bss.
(obj_coff_ident): Added to handle .ident (puts string in .comment
section).
(obj_coff_lcomm): Put common symbols in .bss, not .data.
(fixup_mdeps): Change to segment. Call frag_wane after
md_convert_frag.
(fixup_segment): Explicitly check S_IS_COMMON before making 386
adjustment (already happened only for common symbols, but this is
clearer).
* config/obj-coffbfd.h (OBJ_COFF_OMIT_OPTIONAL_HEADER): Define.
* config/tc-i386.c (s_bss): Don't use if I386COFF.
(md_pseudo_table): Ignore .optim and .noopt.
(tc_coff_sizemachdep): New function.
* config/tc-i386.h (REVERSE_SORT_RELOCS): Undef, for SVR3
compatibility.
(LOCAL_LABEL): Removed definition.
(DOT_LABEL_PREFIX): Defined.
Mon Dec 28 10:32:05 1992 Ken Raeburn (raeburn@cygnus.com)
* app.c (app_push): Use memcpy, not bcopy.
(do_scrub_next_char): For \", return " not '.
(symbol_chars): Now const.
* expr.c (operand): If not LOCAL_LABELS_FB, don't look for "0f"
and "0b". If LOCAL_LABELS_DOLLAR, check for "0$".
* config/obj-coff.h: Don't use #elif.
* config/ho-sunos.h: Don't include sys/stdtypes.h; 4.0.3 doesn't
have it. (Reported by Noah Friedman, friedman@gnu.ai.mit.edu.)
Wed Dec 16 12:12:33 1992 Ian Lance Taylor (ian@cygnus.com)
* write.c, obj-ieee.c: don't define SUB_SEGMENT_ALIGN if it is
already defined.
Tue Dec 15 12:40:11 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* app.c (do_scrub_begin): allow single quote strings if so
configured.
* config/*z8k*: checkpoint
Sun Dec 13 00:04:38 1992 Ian Lance Taylor (ian@cygnus.com)
* read.c (read_a_source_file): avoid calling xmalloc (0).
Sat Dec 12 15:26:34 1992 Ian Lance Taylor (ian@cygnus.com)
* listing.c: Call xmalloc, not malloc; don't declare malloc.
* Changes to support SCO 3.2v4:
* read.c (s_align_bytes, s_align_ptwo): If not SEG_DATA or
SEG_BSS, fill with NOP_OPCODE.
* config/i386coff.mt: Add opcode/i386.h to TARG_CPU_DEPENDENTS.
* config/obj-coffbfd.c (do_relocs_for): Increment addr even if not
using ZERO_BASED_SEGMENTS.
(fill_section): If ZERO_BASED_SEGMENTS, set segment addresses, but
never set segment address for SEG_E2 (.bss) and don't write out
SEG_E2 contents. Set .init and .fini sections to STYP_TEXT.
(obj_coff_endef): Don't merge labels or symbols awaiting forward
definitions, and don't merge tags with non-tags. Check for .bf
rather than just checking whether the second character is b and
the third character is f.
(obj_coff_val): gcc can generate values which we don't handle
correctly; discard information for now, since it only affects the
debugging information.
(tag_find_or_name): Don't insert tags in the symbol table.
(yank_symbols): Don't merge labels.
(write_object_file): Don't define SUB_SEGMENT_ALIGN if it is
already defined. Fill subsegments with NOP_OPCODE, not 0. Don't
set segment address if ZERO_BASED_SEGMENTS.
(obj_coff_section): Accept and ignore a trailing quoted string, as
used in AT&T i386 syntax.
(fixup_segment): Take segment as argument. On the i386, adjust PC
relative addends by the segment vaddr.
* tc-i386.h: Define SUB_SEGMENT_ALIGN.
* tc-a29k.h: Define ZERO_BASED_SEGMENTS.
* tc-i386.c: (i386_operand): If I386COFF, accept any segment type.
Tue Dec 8 00:06:48 1992 Ken Raeburn (raeburn@rtl.cygnus.com)
* config/obj-coffbfd.c: Include libcoff.h.
* version.c: Now version 1.93.
Mon Dec 7 00:39:09 1992 Ken Raeburn (raeburn@cygnus.com)
* config/tc-i386.c (md_pseudo_table): For 386bsd and linux, do
power-of-two alignment for .align.
* as.h: If BROKEN_ASSERT, just redefine `assert' to be trivial,
and leave everything else alone.
Fri Dec 4 16:58:42 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
* Makefile.in (as.new): Don't bother saving as.old.
* write.c: Conditionalize on OBJ_VMS, not VMS.
(magic_number_for_object_file): Don't define if OBJ_VMS.
* config/obj-vms.c: Changes for traditional C.
Thu Dec 3 01:24:07 1992 Ken Raeburn (raeburn@kr-pc.cygnus.com)
* config/ho-generic.h (malloc, realloc): Declare.
* Lots of comment/whitespace changes.
* write.h (struct fix): Some fields reordered, narrowed.
* read.c (MASK_CHAR): Define using C types, not magic number.
* as.c, input-file.c: Deleted some unused code.
* app.c, as.h: Doc fix.
* flonum-konst.c, flonum-mult.c: Include ansidecl.h.
* as.h (xmalloc): Argument is long.
* xmalloc.c (error): Remove declaration; as.h takes care of it.
* doc/as.texinfo: Regrouped documentation of some command-line
options. Updated options documentation for m68k. Some minor
wording/punctuation changes.
Mon Nov 30 11:42:11 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
* configure.in: Accept target OS "vms".
* symbols.c: Merged ANSI and non-ANSI function decls, using
PARAMS macro.
* xmalloc.c: Just include as.h, don't bother trying to figure out
other header files.
* strstr.c, strerror.c: Deleted.
* Makefile.in: Deleted references.
* config/tc-ns32k.c: Don't include header file for string
declarations; leave that to ho-*.h.
Fri Nov 27 04:11:36 1992 Ken Raeburn (raeburn at cambridge-laptop.cygnus.com)
* config/coff_gnu.h [TC_I860]: Guesses for reloc type values,
imported from FSF sources.
* messages.c (strerror): Declare unconditionally.
* as.h: Delete alloca and register definitions.
* config/atof-ieee.c (mask): Now const.
* obstack.c, obstack.h: Deleted.
* as.h (flag_readonly_data_in_text): New flag.
* as.c (main): Set it for -R.
* as.h (flag_suppress_warnings): New flag.
* as.c (main): Set it for -W.
* messages.c (as_warn): Check it instead of flagseen['W'].
* as.h (flag_always_generate_output): New flag.
* as.c (main): Set it for -Z.
* config/tc-sparc.h: Define NEED_FX_R_TYPE.
* config/tc-a29k.h: Ditto.
* write.h (struct fix): Don't conditionalize fx_r_type field on TC
macros.
* as.h: Merged ANSI and non-ANSI function decls, using PARAMS
macro.
* bignum.h, expr.h, flonum.h, frags.h, input-file.h, listing.h,
obj.h, output-file.h, read.h, struc-symbol.h, symbols.h, tc.h,
write.h: Likewise.
* read.c: Likewise.
* xmalloc.c: Conditionalize on HAVE_MALLOC_H, not USG. Fold in
xrealloc from xrealloc.c.
* xrealloc.c: Deleted.
* Makefile.in (REAL_SOURCES, OBJS): Adjusted.
* configure.in: For host CPU a29k, rs6000, vax, consider using bsd
or vms ho- files.
* config/ho-sysv.h (setbuffer, HO_USG): Deleted.
* config/atof-ieee.c (atof_ieee): Exponent field isn't a pointer;
don't initialize it with NULL.
* config/ho-vax.h (M_VAX): Deleted; was unused.
* README-vms, config/ho-vms.h, config/obj-vms.c, config/obj-vms.h:
New files imported from FSF version, contributed by Eric Youngdale.
* README-vms-dbg, config/vms: Deleted.
* ChangeLog, config/ChangeLog: Merged.
* config/*tahoe*, configure.in: Tahoe support brought in from FSF
version.
* input-file.c (input_file_open): Eliminate call to setvbuf.
[USG] (setbuffer): Deleted macro.
Mon Nov 23 11:00:16 1992 Ken Raeburn (raeburn@cygnus.com)
* all files: Whitespace changes for GNU indentation style, done by
GNU `indent'. Some cleanup still needed, especially of comments.
* configure.in: No te-386bsd.h file exists; don't try to use it.
* obj-coff.c (obj_coff_endef): Use as_warn, not fprintf.
* tc-m68k.c (md_assemble): Don't complain about 68000 with 68881;
could be doing emulation.
Thu Nov 19 11:47:19 1992 Steve Chamberlain (sac@thepub.cygnus.com)
z8000 documentation
* doc/Makefile.in, doc/all.m4, doc/as-all.texinfo, doc/as.texinfo:
all modified.
Tue Nov 10 09:49:24 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in (as.o, obj-format.o): added dependency on subsegs.h.
* subsegs.h: add extern to segment_info declaration.
* read.h: added extern declarations for comment_chars,
line_comment_chars, and line_separator_chars.
read.c, app.c: removed definitions of comment_chars,
line_comment_chars, and line_separator_chars.
* tc-m68k.c (m68k_reg_parse): If REGISTER_PREFIX isn't defined,
still accept (but don't require) OPTIONAL_REGISTER_PREFIX before
the register name.
(insert_reg): put REGISTER_PREFIX before register names before
putting them in the symbol table.
* tc-m68k.h (OPTIONAL_REGISTER_PREFIX): Define to be "%", if not
M68KCOFF.
* obj-coffbfd.c (fill_section): set STYP_NOLOAD bit for .bss
section.
* atof-ieee.c, atof-ns32k.c, tc-*.c: made EXP_CHARS, FLT_CHARS,
comment_chars, line_comment_chars and line_seperator_chars
consistently const, and always initialized them. Included read.h.
Thu Nov 5 17:55:41 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
* tc-sparc.c (sparc_ip): Add code to flag error if an absolute
constant will not fit in an immediate field.
(md_apply_fix, RELOC_BASE13 case): Check for relocation overflow.
Wed Nov 4 07:50:46 1992 Ken Raeburn (raeburn@cygnus.com)
* obj-coff.c (callj_table): Delete global variable.
(obj_emit_relocations): Define it locally here, and only if
TC_I960 is defined.
* tc-m68k.c (m68k_reg_parse): Underscore is part of a symbol name.
(m68k_ip): Don't warn about bignum used as float bit-pattern.
* obj-coff.c: Replaced ANSI and non-ANSI function declarations
with a single set using PARAMS macro.
* tc-i960.c (tc_bout_fix_to_chars): Bit-field fixups want a length
of 2.
* tc-i960.c: Missed a couple of 0->NO_RELOC conversions.
* tc-i960.h (N_BALNAME, N_CALLNAME): Define as char-type values,
so widening works consistently.
Wed Oct 28 08:52:34 1992 Ken Raeburn (raeburn@cygnus.com)
* version.c: Put conditional "const" before version_string, not
before dummy function for VMS. Now version 1.91.03.
* app.c (do_scrub_next_char): Need double-\ before `000' to show
printed rep of null character.
Fri Oct 23 14:40:38 1992 Ian Lance Taylor (ian@cygnus.com)
* obj-coffbfd.c (write_object_file): check return value of
bfd_close_all_done.
Tue Oct 20 12:18:08 1992 Ian Lance Taylor (ian@cygnus.com)
* Support for i386-sysv.
obj-coffbfd.c (do_relocs_for, write_object_file): set segment
addresses to reasonable sizes. New define ZERO_BASED_SEGMENTS can
be used to set them all to zero as was done before.
(fill_section): segment addresses now set in write_object_file.
(fill_section): Don't set STYP_NOLOAD for .bss section.
(fixup_segment): 386 uses strange common symbol format.
tc-i386.c (tc_coff_fix2rtype): use R_DIR32, not R_RELLONG, for
compatibility with SVR3.2 linker.
* configure.in: i386-sysv and i386-sco use coffbfd.
* app.c (do_scrub_next_char): discard whitespace after a label.
Sat Oct 10 12:33:45 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
* configure.in: differentiate between SunOS 4 and Solaris2 for Sun4
hosts, use the sysv configuration for solaris2
Mon Oct 5 09:28:57 1992 Steve Chamberlain (sac@thepub.cygnus.com)
fix i960+non-bfd coff bit rot.
* obj-coff.c (c_dot_file_symbol, obj_coff_ln, obj_coff_line):
support for C source listings. (obj_coff_endef): look in the right
part of the symbol for the symbol name
* tc-m68k.c (get_num): make it work for all segments, not just the
first three.
Mon Oct 5 03:30:36 1992 Mark Eichin (eichin at tweedledumber.cygnus.com)
* configure.in: recognize i386-*-bsd emulation.
Thu Oct 1 23:05:12 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
* configure.in: use the cpu-vendor-os triple for host and target
Tue Sep 29 12:22:52 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* obj-coffbfd.c (write_object_file): don't fixup for the z8k
* tc-z8k.c: lots of bug fixes
Tue Sep 29 10:51:55 1992 Ian Lance Taylor (ian@cygnus.com)
* tc-i960.h, tc-i960.c: avoid the ANSI preprocessor addition
#elif, since it is not supported by old compilers.
ho-rs6000.h, tc-m68k.c: the native RS/6000 compiler miscompiles a
couple of expressions in tc-m68k.c.
Mon Sep 28 21:18:24 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
* read.c (cons): If NO_RELOC is defined, use it.
* tc-i960.c (get_cdisp): Use NO_RELOC, not 0, in call to fix_new.
Fri Sep 25 18:18:52 1992 Ian Lance Taylor (ian@cygnus.com)
* tc-m68k.h: if M68KCOFF, define DOT_LABEL_PREFIX (to require
local labels to start with a .) and set REGISTER_PREFIX to %.
tc-m68k.c (m68k_reg_parse): accept REGISTER_PREFIX if defined.
Fri Sep 25 17:53:43 1992 John Gilmore (gnu@cygnus.com)
* messages.c: Comment changes.
Fri Sep 25 14:12:58 1992 Ken Raeburn (raeburn@kyriath.cygnus.com)
* as.h: Test if __STDC__ is defined only, don't test its value.
* messages.c: If __STDC__ is not defined, define NO_STDARG.
Thu Sep 24 12:42:32 1992 Brendan Kehoe (brendan@rtl.cygnus.com)
* listing.c (debugging_pseudo): Add stabs and stabn as things to
ignore.
Tue Sep 22 13:02:07 1992 Sean Eric Fagan (sef@cygnus.com)
* obj-coffbfd.c (do_relocs_for,fill_section): now allocate all
sections starting from zero, rather than making them consecutive.
This makes subsequent reloc calculations easier, esp if the object
format doesn't understand addends. (obj_coff_lcomm): (maybe temporarily)
allocate lcomm in .data rather than in .bss. It seems that some
tools can't cope with a non-zero sized bss before linkage.
Tue Sep 22 15:10:51 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
* tc-m68k.c: Replace "enum m68k_architecture" with "int"
throughout. That enum no longer means what we thought it meant.
* tc-m68k.c (md_assemble, md_parse_option): Handle new
"-mno-688[58]1" options.
* tc-m68k.c: Added CPU32 support.
Fri Sep 18 08:02:18 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* tc-m68k.c (m68k_ip): An(disp) is not pc relative.
Tue Sep 15 17:25:05 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
* Makefile.in (as.new): Remove dependence on LOCAL_LOADLIBES.
Change LIBDEPS dependence to LIBS.
Tue Sep 15 15:32:02 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in (install): if $(tooldir) exists, install as in
$(tooldir)/bin.
Sun Sep 13 20:30:10 1992 Ian Lance Taylor (ian@cygnus.com)
* Added WARN_SIGNED_OVERFLOW_WORD define to give an error if any
.word is < -32768 or > 32767. The -J flag causes the error to be
ignored. This is to catch over-sized switches generated by gcc on
systems which don't support the broken .word hack.
as.c (main): permit -J if WARN_SIGNED_OVERFLOW_WORD.
write.c (fixup_segment): check for signed .word overflow if
WARN_SIGNED_OVERFLOW_WORD.
* write.c (fixup_segment): fixed missing parens in expression
checking for byte or word overflow.
* obj-coffbfd.h: define WARN_SIGNED_OVERFLOW_WORD.
obj-coffbfd.c (fixup_segment): check for signed .word overflow if
WARN_SIGNED_OVERFLOW_WORD.
* obj-coffbfd.c (fixup_segment): fixed missing parens in
expression checking for byte or word overflow.
Fri Sep 11 10:21:04 1992 Steve Chamberlain (sac@thepub.cygnus.com)
Support for i386 coff
* obj-coffbfd.h : added stuff
* tc-i386.c (tc_coff_fix2rtype): new function
* tc-i386.h : new coff defines
Thu Sep 10 09:23:15 1992 Ian Lance Taylor (ian@cygnus.com)
* input-scrub.c (input_scrub_push): call input_file_begin, not
input_scrub_begin.
messages.c (as_perror): print ": " between the passed in error and
the strerror, like perror does.
Wed Sep 9 11:06:25 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in: use gas_target instead of modifying target_cpu.
From Steve Chamberlain:
Makefile.in: Handle m68*-*-coff*.
read.c, read.h: add mult argument to s_space
* tc-m68k.c (m68k_ip, m68k_ip_op, get_num, try_moto_index): merge
Motorola and MIT syntax; gas can now assemble either type of
file.
tc-m68kmote.c, tc-m68kmote.h: removed now superfluous files.
From Steve Chamberlain:
m68kcoff.mt: for m68k COFF.
obj-coffbfd.c: (fixup_mdeps) added
(size_section) removed bad sanity check
(fill_section) added rs_machine_dependent case
(write_object_file) call fixup_mdeps
(fixup_segment) set fx_subsy to 0.
obj-coffbfd.h: define WORKING_DOT_WORD (too hard to support) and
handle m68k.
tc-m68k.c, config/tc-m68k.h: added m68k COFF support and Motorala
pseudo ops.
Tue Sep 8 17:10:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
* Makefile.in (LIBS): Include opcode library.
Fri Sep 4 18:20:56 1992 Ken Raeburn (raeburn@cygnus.com)
* config/tc-m68k.c (get_num, case SEG_BIG): If only small integers
including zero are accepted, pass +0.0.
Sun Aug 30 21:24:46 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in: map "as" through program_transform_name when
installing.
* doc/Makefile.in: map "as" through program_transform_name when
installing.
Sat Aug 29 12:11:12 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
* Makefile.in (as.new): Depend on LOCAL_LOADLIBES.
Fri Aug 28 16:25:22 1992 Ian Lance Taylor (ian@cygnus.com)
* obj-bout.h, obj-bout.c (obj_header_append, obj_symbol_to_chars),
tc-i960.c (md_ri_to_chars): Always output bout object file in
little endian byte order (used to use endianness of host).
Tue Aug 25 15:50:48 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
* config/tc-m68k.c (init_table): Now const. Always include 68851
data, so that "bc" is available to 68040 cache instructions.
Added "tt0", "tt1", and 68ec030 variants.
(md_assemble): Complain if 68000 (only) and 68881 are specified.
(enum _register): Added TT0, TT1.
(m68k_ip, cases '3' and 't'): Handle new operand type codes. Pass
line number correctly in "internal error" messages. Don't print
architecture-mismatch message for operand errors.
From Colin Smith (colin@wrs.com):
* config/tc-m68k.c (m68k_ip, case '_'): Use addword twice rather
than install_operand.
Tue Aug 25 15:13:48 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* listing.c (buffer_line): rewind to the start of include
files, they might be included twice.
* z8k.c, z8k.h, z8k.mt: z8000 support stuff
Mon Aug 24 12:45:43 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in: defined TARGET_CPU for C code so that it can choose
one element of a family.
* tc-m68k.c: use TARGET_CPU to choose default cpu type.
* te-generic.h: default to LOCAL_LABELS_DOLLAR and LOCAL_LABELS_FB
so that we can assemble hand-written libgcc code.
Fri Aug 21 14:38:44 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
* messages.c (as_warn): Use fputs, not fprintf, with a buffer that
has already been formatted (but may still contain %-characters).
(as_bad): Likewise.
Wed Aug 19 11:20:59 1992 Ian Lance Taylor (ian@cygnus.com)
* tc-m68k.c, tc-m68kmote.c: the cas2 instruction is supposed to be
written with indirection on the last two operands, which can be
either data or address registers. Added a new operand type 'r'
which accepts either register type. Added '(' to notend stuff in
tc-m68kmote.c to accept (a0):(a2) in cas2 instruction.
Wed Aug 19 09:25:09 1992 Ken Raeburn (raeburn@cygnus.com)
* as.h (enum _relax_state): Start off at one, not zero, to better
catch uninitialized-variable errors.
(linkrelax): Declare new variable.
* messages.c (warning_count, error_count): Default initializer is
sufficient.
* write.c: Merged some declarations, using PARMS macro.
(text_frag_root, data_frag_root, bss_frag_root, text_last_frag,
data_last_frag): No longer static.
(write_object_file, case rs_align or rs_org): If HANDLE_ALIGN is
defined, call it. Change segments before calling fixup_segment.
(relax_align): If linkrelax, provide extra padding.
* obj-bout.c (obj_emit_relocations): Emit alignment relocs despite
their not having symbols associated.
* tc-i960.c (norelax, instrument_branches): Default initializer is
sufficient.
(linkrelax): Delete variable definition.
(mem_fmt): Call fix_new with NO_RELOC.
(tc_bout_fix_to_chars): Handle alignment relocs.
(i960_handle_align): New function.
* tc-i960.h (linkrelax): Delete declaration.
(HANDLE_ALIGN): New macro; calls i960_handle_align.
(NEED_FX_R_TYPE, NO_RELOC): New macros.
Tue Aug 18 14:59:21 1992 Ken Raeburn (raeburn@cygnus.com)
* config/sparc.mt: New file. Grab sparc opcode table from bfd
library.
Tue Aug 18 14:16:38 1992 Ian Lance Taylor (ian@cygnus.com)
* Makefile.in: always create installation directories. Removed
MINUS_G, set CFLAGS to default to -g, added FLAGS_TO_PASS, passed
FLAGS_TO_PASS to recursive makes.
* doc/Makefile.in: always create installation directories.
Mon Aug 17 15:09:56 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* input-scrub.c (input_scrub_pop, input_scrub_push): memcpy was
being used with args swapped, causing occasional lossage when
refilling buffers after an include file.
Mon Aug 17 13:18:51 1992 Ken Raeburn (raeburn@cygnus.com)
* messages.c (as_tsktsk): Use correct ANSI form for stdarg
version. Discard bogus DONTDEF version.
(as_warn, as_bad, as_fatal): Likewise.
Fri Aug 14 18:31:14 1992 Ken Raeburn (raeburn@cygnus.com)
* config/tc-m68k.c (m68k_ip): If instruction is invalid for the
selected architecture, print a message saying so and listing what
processors support it, rather than saying "operands mismatch".
Thu Aug 13 13:53:19 1992 Ken Raeburn (raeburn@cygnus.com)
* as.h [BROKEN_ASSERT]: If defined, turn off all assertion checks.
* config/ho-rs6000.h (M_RS6000): Don't define it.
(free): Declare it.
(BROKEN_ASSERT): Define it if not __STDC__.
Tue Aug 11 12:58:14 1992 Ken Raeburn (raeburn@cygnus.com)
* sparc.mt: New file.
Mon Aug 10 14:37:08 1992 Per Bothner (bothner@cygnus.com)
* tc-m68k.c: ".align N" means align to N-byte boundary *only*
if TN_SUN3; otherwise align to 2**N-byte bounary.
Thu Aug 6 12:10:39 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* read.c (s_fill): make the .fill size clamped error a warn and
fix bug where 0's were always placed.
* config/tc-h8300.c: if a :8 is seen after an operand, fill top
two bytes of any constant with 0xff:
Wed Aug 5 12:02:40 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* config/tc-m68k.c (md_pseudo_table): fix the .align thing
the right way; for just the 68k. Sun 3 .align is nbytes, not ptwo.
Wed Aug 5 01:54:34 1992 John Gilmore (gnu at cygnus.com)
* tc-m68k.c (try_index): Error if index scaling specified and
assembling for an older CPU than a 68020.
Sat Aug 1 19:10:13 1992 Ken Raeburn (raeburn@cygnus.com)
* config/tc-sparc.c (tc_aout_fix_to_chars): If pc-relative, take
fx_offset into account.
Fri Jul 31 21:53:28 1992 Ken Raeburn (raeburn@cygnus.com)
* configure.in (mips host): Accept "ultrix" with version number.
* expr.c (floating_constant): Separate "=-" to avoid confusing
ancient or broken compilers.
* config/tc-m68k.c (m68k_ip): Mismatch error could also indicate
processor/opcode mismatch, so reword the error message.
(md_assemble): If no CPU has been set (even if FPU/PMMU
characteristics have been), default to 68020. Don't need extra
quotes around error string.
Fri Jul 31 12:26:34 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
* read.c (potable): Revert sac's incorrect change made Jul 13.
Align really is supposed to be ptwo not nbytes.
Mon Jul 20 02:51:59 1992 D. V. Henkel-Wallace (gumby@cygnus.com)
* Makefile.in: _Do_ include libiberty. (from sef)
Fri Jul 17 15:15:28 1992 Ken Raeburn (raeburn@cygnus.com)
* expr.c (integer_constant): Handle "0f" and "0b" label references
properly.
Thu Jul 16 08:20:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* write.c (fixup_segment): if relaxing, don't do anything.
* config/obj-bout.[ch] : maintain the a_relaxable file header info
* config/tc-i960.c: new option -linkrelax
Mon Jul 13 14:11:36 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* expr.c (expr): allow SEG_BSS in expressions
* read.c (potable): align should be nbytes, not ptwo!
* write.c (write_object_file): extra glue for new bss attributes
(relax_segment): SEG_BSS is ok now
* config/tc-m68k.c (m68k_ip_op): can now parse more @( modes
Mon Jul 6 17:09:32 1992 Steve Chamberlain (sac@cygnus.com)
* obj-coffbfd.c (fill_section): mark .lit sections as STYP_LIT
Mon Jun 1 16:20:22 1992 Michael Tiemann (tiemann@cygnus.com)
* configure.in: recognize m680x0 as having sun3 emulation mode for
vxworks environment.
Tue Jun 30 20:25:54 1992 D. V. Henkel-Wallace (gumby@cygnus.com)
* Makefile.in: Add program_suffix (parallel to program_prefix)
Wed Jun 24 10:57:54 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* app.c (process_escape): new function to handle escapes the right
way, (do_scrub_next_char): use new function
* cond.c (s_ifdef): do ifdef/ifndef right
* read.c (s_fill): make the , expressions optional like the doc
says
* config/tc-h8300.[ch]: better warnings
Tue Jun 9 07:54:54 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* subsegs.c (subsegs_begin): create bss0_frchainP in the same was
as data0_frchainP
* write.c (write_object_file): various changes to handle data in
the BSS segment in much the same was as stuff in the DATA segment.
* tc-m68k.c (m68kip): Fix typo so that only arch's >=68020 do
pcrel data stuff. (md_estimate_size_before_relax): when relaxing a
68010 bxx into a bra+6 jmpxx, put the bytes of the jmp opcode into
the right place. (s_bss): Don't put .bss stuff into SEG_DATA, put
it into SEG_BSS
Thu Jun 4 11:59:13 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* expr.c(expr): allow SEG_REGISTER in expressions.
* read.c(pseudo_set): register expressions can be the source of a
set.
* subsegs.c (subseg_new): Now -R forces all changes to SEG_DATA to
goto SEG_TEXT (if a.out)
* write.c (write_object_file): If a.out don't use the old way for
-R.
* config/obj-a.out (s_sect): complain if the user tries to use a
subsegment with a value which might interfere with out -R hackery.
* config/tc-m68k.c (m68k_reg_parse): lookup names in symbol table
rather than use ugly if tree. (init_regtable): insert register
names into symbol table.
Tue Jun 2 16:47:09 1992 Steve Chamberlain (sac@cygnus.com)
* write.c (write_object_file): keep the fix_tail clean, which
fixes a bug in -R where relocations were being lost.
Mon Jun 1 16:20:22 1992 Michael Tiemann (tiemann@cygnus.com)
* configure.in: recognize m680x0 as having sun3 emulation mode for
vxworks environment.
Sun May 31 05:33:00 1992 david d `zoo' zuhn (zoo@cygnus.com)
* configure.in: recognize m680x0 as an m68k
Thu May 28 11:22:02 1992 Jim Wilson (wilson@sphagnum.cygnus.com)
* configure.in: Recognize sparclite as a sparc variant.
* tc-sparc.c: Use new ARCHITECTURES_CONFLICT_P macro. Mention new
-Asparclite flag.
Tue May 26 16:47:56 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* config/tc-a29k.c: lint
* listing.c, expr.c: patches from Andrew Smith
Thu May 14 17:22:48 1992 K. Richard Pixley (rich@rtl.cygnus.com)
* doc/Makefile.in: use m4 rather than gm4.
Mon May 4 18:56:19 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* obj-coffbfd.c: use is a synonym for section, (do_relocs_for):
calc the base of relocs correctly.
* tc-a29k.c (parse_operand): allow expressions to be in any section.
Mon Apr 27 13:13:31 1992 K. Richard Pixley (rich@cygnus.com)
* as.c, write.c: use -K rather than -k for the broken word warning
option.
Tue Apr 21 13:35:30 1992 K. Richard Pixley (rich@cygnus.com)
* Makefile.in: do not print recursion lines.
Wed Apr 15 21:19:31 1992 K. Richard Pixley (rich@rtl.cygnus.com)
* Makefile.in: the tooldir copy of gas goes directly in tooldir.
Tue Apr 14 14:50:22 1992 Ken Raeburn (Raeburn@Cygnus.COM)
* write.c (write_object_file): For b.out format, round up section
start addresses to match required alignment.
Thu Apr 9 05:45:29 1992 Ken Raeburn (Raeburn@Cygnus.COM)
* Makefile.in (install): Install into $(tooldir)/bin, since that's
where gcc looks for it.
Tue Apr 7 15:12:15 1992 Sean Eric Fagan (sef@cygnus.com)
* Makefile.in: Changed some lines to be less confusing for some
makes.
* input-file.c: Conditionalize on _IOFBF, not VMS.
* read.c, write.c: Change a series of ifdef/elif to
ifdef/else/ifdef etc.
Fri Mar 27 12:21:16 1992 K. Richard Pixley (rich@cygnus.com)
* symbols.c (fb_label_init): fix sizeof to memset.
Fri Mar 13 15:45:44 1992 K. Richard Pixley (rich@cygnus.com)
* Makefile.in: install the man page.
* Makefile.in: pass down MAKEINFO explicitly on info.
* doc/Makefile.in: use $(MAKEINFO) not makeinfo.
Fri Mar 13 08:03:03 1992 Steve Chamberlain (sac@thepub.cygnus.com)
* flonum-const.c: renamed flonum-konst.c to stop dos name
conflict.
Thu Mar 12 04:42:38 1992 K. Richard Pixley (rich@cygnus.com)
* tc-m68k.h, te-sun3.h: moved LOCAL_LABELS_FB definition from
tc-m68k.h to te-sun3.h.
Wed Mar 11 23:32:42 1992 K. Richard Pixley (rich@cygnus.com)
* configure.in: vxworks68 gets te-sun3.h.
* expr.c: remove limitation that local_labels_dollar or
local_labels_fb must be < 10.
* symbols.c: remove local_labels_dollar, replace with a function
interface for a sparse array. All users adjusted.
* te-sun3.h: add LOCAL_LABELS_DOLLAR.
Sat Mar 7 00:06:25 1992 K. Richard Pixley (rich@rtl.cygnus.com)
* doc/Makefile.in: commented out line for building as-all.texinfo.
This is temporary.
* doc/as.texinfo, doc/as-all.texinfo: added menu item hooks.
Fri Mar 6 21:57:18 1992 K. Richard Pixley (rich@cygnus.com)
* Makefile.in: added check target.
Tue Mar 3 15:45:56 1992 K. Richard Pixley (rich@rtl.cygnus.com)
* Makefile.in: added tooldir and program_prefix.
Sun Mar 1 04:43:19 1992 Michael Tiemann (tiemann@cygnus.com)
* write.{c,h} (fix_new): Make these declarations consistent.
Sat Feb 29 13:59:10 1992 Michael Tiemann (tiemann@cygnus.com)
* Makefile.in (strerror.o): Add rule so that broken Sun make can
work in subdirs.
Wed Feb 26 19:26:28 1992 Steve Chamberlain (sac at thepub.cygnus.com)
* read.c, obj-coffbfd.c : fix h8300 specific bit rot
* expr.c (operand): if can't work out what sort of operand it is,
then look through FLT_CHARS for a hint.
Wed Feb 26 18:04:40 1992 K. Richard Pixley (rich@cygnus.com)
* Makefile.in, configure.in: removed traces of namesubdir,
-subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
copyrights to '92, changed some from Cygnus to FSF.
* doc/Makefile.in, doc/configure.in: removed traces of namesubdir,
-subdirs, $(subdir), $(unsubdir), some rcs triggers. Forced
copyrights to '92, changed some from Cygnus to FSF.
Tue Feb 25 14:17:15 1992 Steve Chamberlain (sac at rtl.cygnus.com)
* expr.c: If an expression is single comma, then return with
SEG_ABSENT rather than an error - since the sparc front end does
really strange things with things like fbge,a
* as.h: include bfd.h if using many sections
* expr.c: LOCAL_LABELS_FB had been changed to lower case - so
local labels didn't work.
* listing.c (list_symbol_table): don't core dump when there's no
symbol there.
* write.c, write.h: call fix_new with the right number of args on
the H8.
* config/tc-h8300.[ch] : fix bugs reported by HMSI, and make
errors nices
Sat Feb 22 12:26:28 1992 Steve Chamberlain (sac at rtl.cygnus.com)
* app.c: MRI compatibility - allow single quote to start a string.
* as.c: fix typo recently introduced.
* as.h : Don't include aout/reloc.h - it's not right for COFF!
* expr.c: Much rewriting, to accomodate MRI syntax for
expressions. Also easier to read now.
* listing.c: Put back defuns
* read.c: modified to accept MRI syntax, put back listing pseudo
ops so that an assembler built with NO_LISTING ignores list ops
rather than pukes.
* write.c, write.h: fixs - only keep a reloc type in a fix if the target
machine is a SPARC or a 29K.
* config/obj-aout.c: added s_sect pseudo op
* config/obj-coffbfd.c: lints, set the filehdr flags right and
fill in the timestamp.
* config/obj-coffbfd.h: Since we don't include aout/reloc.h
anymore, define all the relocs which the tc-<x> bit will use so we
can translate from them to the coff types.
* config/tc-a29k.c: reloc_type isn't ane enum any more
* config/tc-m68k.c: Added NO_RELOC definition.
Fri Feb 21 06:21:07 1992 K. Richard Pixley (rich@rtl.cygnus.com)
* Makefile.in: put header files before C source for TAGS; remove
references to non-existent syscalls.h.
* read.c, write.c subsegs.c: back out the .bss changes.
* obj-aout.c: do not include stab.gnu.h if NO_LISTING.
* tc-i860.c, a.out.gnu.h: move i860 relocs to a proper place.
* a.out.h: removed.
Fri Feb 21 01:08:48 1992 Minh Tran-Le (TRANLE@INTELLICORP.COM)
* symbols.c (local_label_name): symbols now start with ^A.
* read.c, subsegs.c, write.c obj-coff.c: added handling of
`.bss` pseudo op for unitialized data. The new gcc (1.37.9x)
generate these sections. .align: will use NOP_OPCODE or 0
for padding. This is just for being nice to the
disassembler.
* expr.c (operand): changed to generate local label "\001L0"
starting with a ^A so that it is recognized as a local label.
* as.c (perform_an_assembly_pass): zero bss_fix_root, too.
* tc-i386.c: tc-i386.c: added handling of the following opcodes:
i/o opcodes - inb, inw, outb and outw. string manipulation with
att syntax - scmp, slod, smov, ssca, ssto.
* obj-coff.c: (for aix386) Moved the symbols .text, .data and .bss
to just after .file .
In obj_crawl_symbol_chain() where it tries to put the external
symbols apart, with the condition:
(!S_IS_DEFINED(symbolP) &&
!S_IS_DEBUG(symbolP) &&
!SF_GET_STATICS(symbolP))
it was moving too many symbols out. So I switch it back to the
condition:
(S_GET_STORAGE_CLASS(symbolP) == C_EXT && !SF_GET_FUNCTION(symbolP))
In obj_emit_relocations() added the conditional on KEEP_RELOC_INFO
so that we don't use the F_RELFLG which make the linker complain
that somebody has stripped the relocation info.
Also, the AIX ld program require that the relocation table
is sorted by r_vaddr like the standard ATT assembler does.
[he also changed the sizeof(struct ...)'s into the coff
style FOOSZ macros. I'm not sure this is right, but I can't
remember why. xoxorich.]
Fri Feb 21 01:08:48 1992 K. Richard Pixley (rich@cygnus.com)
* Makefile.in, configure.in, doc: use the doc. Build it, install
it, clean it, etc.
Tue Feb 18 02:21:25 1992 K. Richard Pixley (rich at cygnus.com)
* read.c: white space and comments only.
* configure.in: use the new atof-ns32.c for ns32k.
* write.c: comment change only.
* tc-m88k.[hc]: pulled in from hack's unfinished work. These
aren't yet integrated.
* tc-i860.[hc]: blew off the dust. Something must still be done
about conflicting relocation types.
* tc-ns32k.c: Replaced previous tc_aout_fix_to_chars stub with the
real thing.
* tc-i960.c, tc-sparc.c: white space and comments only.
* tc-a29k.h: delete duplicate macro definition.
* new file atof-ns32k.c copied from hack's last unreleased gas.
Mon Feb 17 07:51:06 1992 K. Richard Pixley (rich at cygnus.com)
* config/tc-ns32k.c: actually make tc_aout_fix_to_chars work
rather than abort.
* nearly everything. flush ChangeLog, package as gas-1.92.1.
ChangeLog's prior to this are sketchy at best. I have logs.
They just aren't ChangeLogs.
Reference in New Issue View Git Blame Copy Permalink