mirror/binutils-gdb
2
0
Fork 0
mirror of https://sourceware.org/git/binutils-gdb.git synced 2024-12-15 04:31:49 +08:00
Code Issues Packages Projects Releases Wiki Activity
4bc0608a8b
binutils-gdb/opcodes/ChangeLog
Peter Bergner 4bc0608a8b Fix some PPC assembler errors. 
Remove the wait instructions for server processors, since they were never
implemented.  Also add the extra operands added to the tlbie and slbia
instructions with ISA 2.06 and ISA 2.05 respectively.

binutils/
	* MAINTAINERS: Add myself as PPC maintainer.

opcodes/
        * ppc-opc.c (IH) New define.
        (powerpc_opcodes) <wait>: Do not enable for POWER7.
        <tlbie>: Add RS operand for POWER7.
        <slbia>: Add IH operand for POWER6.

gas/testsuite/
        * gas/ppc/power4.d: Add a slbia test.
        * gas/ppc/power4.s: Likewise.
        * gas/ppc/power6.d: Add slbia and tlbie tests.
        * gas/ppc/power6.s: Likewise.
        * gas/ppc/power7.d: Remove wait tests. Add a tlbie test.
        * gas/ppc/power7.s: Likewise.
2015-05-14 21:02:50 -05:00

328 lines
10 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

2015-05-14 Peter Bergner <bergner@vnet.ibm.com>
* ppc-opc.c (IH) New define.
(powerpc_opcodes) <wait>: Do not enable for POWER7.
<tlbie>: Add RS operand for POWER7.
<slbia>: Add IH operand for POWER6.
2015-05-11 H.J. Lu <hongjiu.lu@intel.com>
* opcodes/i386-opc.tbl (call): Remove Disp16|Disp32 from 64-bit
direct branch.
(jmp): Likewise.
* i386-tbl.h: Regenerated.
2015-05-11 H.J. Lu <hongjiu.lu@intel.com>
* configure.ac: Support bfd_iamcu_arch.
* disassemble.c (disassembler): Support bfd_iamcu_arch.
* i386-gen.c (cpu_flag_init): Add CPU_IAMCU_FLAGS and
CPU_IAMCU_COMPAT_FLAGS.
(cpu_flags): Add CpuIAMCU.
* i386-opc.h (CpuIAMCU): New.
(i386_cpu_flags): Add cpuiamcu.
* configure: Regenerated.
* i386-init.h: Likewise.
* i386-tbl.h: Likewise.
2015-05-08 H.J. Lu <hongjiu.lu@intel.com>
PR binutis/18386
* i386-dis.c (X86_64_E8): New.
(X86_64_E9): Likewise.
Update comments on 'T', 'U', 'V'. Add comments for '^'.
(dis386): Replace callT/jmpT with X86_64_E8/X86_64_E9.
(x86_64_table): Add X86_64_E8 and X86_64_E9.
(mod_table): Replace {T|} with ^ on Jcall/Jmp.
(putop): Handle '^'.
(OP_J): Ignore the operand size prefix in 64-bit. Don't check
REX_W.
2015-04-30 DJ Delorie <dj@redhat.com>
* disassemble.c (disassembler): Choose suitable disassembler based
on E_ABI.
* rl78-decode.opc (rl78_decode_opcode): Take ISA parameter. Use
it to decode mul/div insns.
* rl78-decode.c: Regenerate.
* rl78-dis.c (print_insn_rl78): Rename to...
(print_insn_rl78_common): ...this, take ISA parameter.
(print_insn_rl78): New.
(print_insn_rl78_g10): New.
(print_insn_rl78_g13): New.
(print_insn_rl78_g14): New.
(rl78_get_disassembler): New.
2015-04-29 Nick Clifton <nickc@redhat.com>
* po/fr.po: Updated French translation.
2015-04-27 Peter Bergner <bergner@vnet.ibm.com>
* ppc-opc.c (DCBT_EO): New define.
(powerpc_opcodes) <lbarx>: Enable for POWER8 and later.
<lharx>: Likewise.
<stbcx.>: Likewise.
<sthcx.>: Likewise.
<waitrsv>: Do not enable for POWER7 and later.
<waitimpl>: Likewise.
<dcbt>: Default to the two operand form of the instruction for all
"old" cpus. For "new" cpus, use the operand ordering that matches
whether the cpu is server or embedded.
<dcbtst>: Likewise.
2015-04-27 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.c: New instruction type VV0UU2.
* s390-opc.txt: Fix instruction types for VFCE, VLDE, VFSQ, WFK,
and WFC.
2015-04-23 Jan Beulich <jbeulich@suse.com>
* i386-dis.c (putop): Extend "XY" handling to AVX512. Handle "XZ".
* i386-dis-evex.h.c (vcvtpd2ps, vcvtqq2ps, vcvttpd2udq,
vcvtpd2udq, vcvtuqq2ps, vcvttpd2dq, vcvtpd2dq): Add %XY.
(vfpclasspd, vfpclassps): Add %XZ.
2015-04-15 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (PREFIX_UD_SHIFT): Removed.
(PREFIX_UD_REPZ): Likewise.
(PREFIX_UD_REPNZ): Likewise.
(PREFIX_UD_DATA): Likewise.
(PREFIX_UD_ADDR): Likewise.
(PREFIX_UD_LOCK): Likewise.
2015-04-15 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (prefix_requirement): Removed.
(print_insn): Don't set prefix_requirement. Check
dp->prefix_requirement instead of prefix_requirement.
2015-04-15 H.J. Lu <hongjiu.lu@intel.com>
PR binutils/17898
* i386-dis.c (PREFIX_0FC7_REG_6): Renamed to ...
(PREFIX_MOD_0_0FC7_REG_6): This.
(PREFIX_MOD_3_0FC7_REG_6): New.
(PREFIX_MOD_3_0FC7_REG_7): Likewise.
(prefix_table): Replace PREFIX_0FC7_REG_6 with
PREFIX_MOD_0_0FC7_REG_6. Add PREFIX_MOD_3_0FC7_REG_6 and
PREFIX_MOD_3_0FC7_REG_7.
(mod_table): Replace PREFIX_0FC7_REG_6 with
PREFIX_MOD_0_0FC7_REG_6. Use PREFIX_MOD_3_0FC7_REG_6 and
PREFIX_MOD_3_0FC7_REG_7.
2015-04-15 H.J. Lu <hongjiu.lu@intel.com>
* i386-dis.c (PREFIX_MANDATORY_REPZ): Removed.
(PREFIX_MANDATORY_REPNZ): Likewise.
(PREFIX_MANDATORY_DATA): Likewise.
(PREFIX_MANDATORY_ADDR): Likewise.
(PREFIX_MANDATORY_LOCK): Likewise.
(PREFIX_MANDATORY): Likewise.
(PREFIX_UD_SHIFT): Set to 8
(PREFIX_UD_REPZ): Updated.
(PREFIX_UD_REPNZ): Likewise.
(PREFIX_UD_DATA): Likewise.
(PREFIX_UD_ADDR): Likewise.
(PREFIX_UD_LOCK): Likewise.
(PREFIX_IGNORED_SHIFT): New.
(PREFIX_IGNORED_REPZ): Likewise.
(PREFIX_IGNORED_REPNZ): Likewise.
(PREFIX_IGNORED_DATA): Likewise.
(PREFIX_IGNORED_ADDR): Likewise.
(PREFIX_IGNORED_LOCK): Likewise.
(PREFIX_OPCODE): Likewise.
(PREFIX_IGNORED): Likewise.
(Bad_Opcode): Replace PREFIX_MANDATORY with 0.
(dis386_twobyte): Replace PREFIX_MANDATORY with PREFIX_OPCODE.
(three_byte_table): Likewise.
(mod_table): Likewise.
(mandatory_prefix): Renamed to ...
(prefix_requirement): This.
(prefix_table): Replace PREFIX_MANDATORY with PREFIX_OPCODE.
Update PREFIX_90 entry.
(get_valid_dis386): Check prefix_requirement to see if a prefix
should be ignored.
(print_insn): Replace mandatory_prefix with prefix_requirement.
2015-04-15 Renlin Li <renlin.li@arm.com>
* arm-dis.c (thumb32_opcodes): Define 'D' format control code,
use it for ssat and ssat16.
(print_insn_thumb32): Add handle case for 'D' control code.
2015-04-06 Ilya Tocar <ilya.tocar@intel.com>
H.J. Lu <hongjiu.lu@intel.com>
* i386-dis-evex.h (evex_table): Fill prefix_requirement field.
* i386-dis.c (PREFIX_MANDATORY_REPZ, PREFIX_MANDATORY_REPNZ,
PREFIX_MANDATORY_DATA, PREFIX_MANDATORY_ADDR, PREFIX_MANDATORY_LOCK,
PREFIX_UD_SHIFT, PREFIX_UD_REPZ, REFIX_UD_REPNZ, PREFIX_UD_DATA,
PREFIX_UD_ADDR, PREFIX_UD_LOCK, PREFIX_MANDATORY): Define.
(Bad_Opcode, FLOAT, DIS386, DIS386_PREFIX, THREE_BYTE_TABLE_PREFIX):
Fill prefix_requirement field.
(struct dis386): Add prefix_requirement field.
(dis386): Fill prefix_requirement field.
(dis386_twobyte): Ditto.
(twobyte_has_mandatory_prefix_: Remove.
(reg_table): Fill prefix_requirement field.
(prefix_table): Ditto.
(x86_64_table): Ditto.
(three_byte_table): Ditto.
(xop_table): Ditto.
(vex_table): Ditto.
(vex_len_table): Ditto.
(vex_w_table): Ditto.
(mod_table): Ditto.
(bad_opcode): Ditto.
(print_insn): Use prefix_requirement.
(FGRPd9_2, FGRPd9_4, FGRPd9_5, FGRPd9_6, FGRPd9_7, FGRPda_5, FGRPdb_4,
FGRPde_3, FGRPdf_4): Fill prefix_requirement field.
(float_reg): Ditto.
2015-03-30 Mike Frysinger <vapier@gentoo.org>
* d10v-opc.c (d10v_reg_name_cnt): Convert old style prototype.
2015-03-29 H.J. Lu <hongjiu.lu@intel.com>
* Makefile.in: Regenerated.
2015-03-25 Anton Blanchard <anton@samba.org>
* ppc-dis.c (disassemble_init_powerpc): Only initialise
powerpc_opcd_indices and vle_opcd_indices once.
2015-03-25 Anton Blanchard <anton@samba.org>
* ppc-opc.c (powerpc_opcodes): Add slbfee.
2015-03-24 Terry Guo <terry.guo@arm.com>
* arm-dis.c (opcode32): Updated to use new arm feature struct.
(opcode16): Likewise.
(coprocessor_opcodes): Replace bit with feature struct.
(neon_opcodes): Likewise.
(arm_opcodes): Likewise.
(thumb_opcodes): Likewise.
(thumb32_opcodes): Likewise.
(print_insn_coprocessor): Likewise.
(print_insn_arm): Likewise.
(select_arm_features): Follow new feature struct.
2015-03-17 Ganesh Gopalasubramanian <Ganesh.Gopalasubramanian@amd.com>
* i386-dis.c (rm_table): Add clzero.
* i386-gen.c (cpu_flag_init): Add new CPU_ZNVER1_FLAGS.
Add CPU_CLZERO_FLAGS.
(cpu_flags): Add CpuCLZERO.
* i386-opc.h: Add CpuCLZERO.
* i386-opc.tbl: Add clzero.
* i386-init.h: Re-generated.
* i386-tbl.h: Re-generated.
2015-03-13 Andrew Bennett <andrew.bennett@imgtec.com>
* mips-opc.c (decode_mips_operand): Fix constraint issues
with u and y operands.
2015-03-13 Andrew Bennett <andrew.bennett@imgtec.com>
* mips-opc.c (mips_builtin_opcodes): Add evp and dvp instructions.
2015-03-10 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.c: Add new IBM z13 instructions.
* s390-opc.txt: Likewise.
2015-03-10 Renlin Li <renlin.li@arm.com>
* aarch64-tbl.h (aarch64_opcode_table): Remove strub, ldurb, ldursb,
stur, ldur, sturh, ldurh, ldursh, ldursw, prfum F_HAS_ALIAS flag and
related alias.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
2015-03-03 Jiong Wang <jiong.wang@arm.com>
* arm-dis.c (arm_symbol_is_valid): Skip ARM private symbols.
2015-02-25 Oleg Endo <olegendo@gcc.gnu.org>
* sh-opc.h (clrs, sets): Mark as arch_sh3_nommu_up instead of
arch_sh_up.
(pref): Mark as arch_sh2a_nofpu_or_sh3_nommu_up instead of
arch_sh2a_nofpu_or_sh4_nommu_nofpu_up.
2015-02-23 Vinay <Vinay.G@kpit.com>
* rl78-decode.opc (MOV): Added space between two operands for
'mov' instruction in index addressing mode.
* rl78-decode.c: Regenerate.
2015-02-19 Pedro Alves <palves@redhat.com>
* microblaze-dis.h [__cplusplus]: Wrap in extern "C".
2015-02-10 Pedro Alves <palves@redhat.com>
Tom Tromey <tromey@redhat.com>
* microblaze-opcm.h (or, and, xor): Rename to microblaze_or,
microblaze_and, microblaze_xor.
* microblaze-opc.h (opcodes): Adjust.
2015-01-28 James Bowman <james.bowman@ftdichip.com>
* Makefile.am: Add FT32 files.
* configure.ac: Handle FT32.
* disassemble.c (disassembler): Call print_insn_ft32.
* ft32-dis.c: New file.
* ft32-opc.c: New file.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
2015-01-28 Kuan-Lin Chen <kuanlinchentw@gmail.com>
* nds32-asm.c (keyword_sr): Add new system registers.
2015-01-16 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-dis.c (s390_extract_operand): Support vector register
operands.
(s390_print_insn_with_opcode): Support new operands types and add
new handling of optional operands.
* s390-mkopc.c (s390_opcode_mode_val, s390_opcode_cpu_val): Remove
and include opcode/s390.h instead.
(struct op_struct): New field `flags'.
(insertOpcode, insertExpandedMnemonic): New parameter `flags'.
(dumpTable): Dump flags.
(main): Parse flags from the s390-opc.txt file. Add z13 as cpu
string.
* s390-opc.c: Add new operands types, instruction formats, and
instruction masks.
(s390_opformats): Add new formats for .insn.
* s390-opc.txt: Add new instructions.
2015-01-01 Alan Modra <amodra@gmail.com>
Update year range in copyright notice of all files.
For older changes see ChangeLog-2014
Copyright (C) 2015 Free Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End:
Reference in New Issue View Git Blame Copy Permalink