binutils-gdb/gdb/dbxread.c
Jim Kingdon b30c81b649 * dbxread.c (unknown_symchar_complaint): Make message refer to
"symbol descriptor" not "symbol type character" for consistency
	with stabs.texinfo terminology.
1993-11-05 04:57:29 +00:00

2215 lines
72 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Read dbx symbol tables and convert to internal format, for GDB.
Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993
Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
/* This module provides three functions: dbx_symfile_init,
which initializes to read a symbol file; dbx_new_init, which
discards existing cached information when all symbols are being
discarded; and dbx_symfile_read, which reads a symbol table
from a file.
dbx_symfile_read only does the minimum work necessary for letting the
user "name" things symbolically; it does not read the entire symtab.
Instead, it reads the external and static symbols and puts them in partial
symbol tables. When more extensive information is requested of a
file, the corresponding partial symbol table is mutated into a full
fledged symbol table by going back and reading the symbols
for real. dbx_psymtab_to_symtab() is the function that does this */
#include "defs.h"
#include <string.h>
#if defined(USG) || defined(__CYGNUSCLIB__)
#include <sys/types.h>
#include <fcntl.h>
#endif
#include <obstack.h>
#include <sys/param.h>
#ifndef NO_SYS_FILE
#include <sys/file.h>
#endif
#include <sys/stat.h>
#include <ctype.h>
#include "symtab.h"
#include "breakpoint.h"
#include "command.h"
#include "target.h"
#include "gdbcore.h" /* for bfd stuff */
#include "libbfd.h" /* FIXME Secret internal BFD stuff (bfd_read) */
#include "libaout.h" /* FIXME Secret internal BFD stuff for a.out */
#include "symfile.h"
#include "objfiles.h"
#include "buildsym.h"
#include "stabsread.h"
#include "gdb-stabs.h"
#include "demangle.h"
#include "language.h" /* Needed inside partial-stab.h */
#include "complaints.h"
#include "aout/aout64.h"
#include "aout/stab_gnu.h" /* We always use GNU stabs, not native, now */
#if !defined (SEEK_SET)
#define SEEK_SET 0
#define SEEK_CUR 1
#endif
/* Each partial symbol table entry contains a pointer to private data for the
read_symtab() function to use when expanding a partial symbol table entry
to a full symbol table entry.
For dbxread this structure contains the offset within the file symbol table
of first local symbol for this file, and length (in bytes) of the section
of the symbol table devoted to this file's symbols (actually, the section
bracketed may contain more than just this file's symbols). It also contains
further information needed to locate the symbols if they are in an ELF file.
If ldsymlen is 0, the only reason for this thing's existence is the
dependency list. Nothing else will happen when it is read in. */
#define LDSYMOFF(p) (((struct symloc *)((p)->read_symtab_private))->ldsymoff)
#define LDSYMLEN(p) (((struct symloc *)((p)->read_symtab_private))->ldsymlen)
#define SYMLOC(p) ((struct symloc *)((p)->read_symtab_private))
#define SYMBOL_SIZE(p) (SYMLOC(p)->symbol_size)
#define SYMBOL_OFFSET(p) (SYMLOC(p)->symbol_offset)
#define STRING_OFFSET(p) (SYMLOC(p)->string_offset)
#define FILE_STRING_OFFSET(p) (SYMLOC(p)->file_string_offset)
struct symloc {
int ldsymoff;
int ldsymlen;
int symbol_size;
int symbol_offset;
int string_offset;
int file_string_offset;
};
/* Macro to determine which symbols to ignore when reading the first symbol
of a file. Some machines override this definition. */
#ifndef IGNORE_SYMBOL
/* This code is used on Ultrix systems. Ignore it */
#define IGNORE_SYMBOL(type) (type == (int)N_NSYMS)
#endif
/* Macro for name of symbol to indicate a file compiled with gcc. */
#ifndef GCC_COMPILED_FLAG_SYMBOL
#define GCC_COMPILED_FLAG_SYMBOL "gcc_compiled."
#endif
/* Macro for name of symbol to indicate a file compiled with gcc2. */
#ifndef GCC2_COMPILED_FLAG_SYMBOL
#define GCC2_COMPILED_FLAG_SYMBOL "gcc2_compiled."
#endif
/* Define this as 1 if a pcc declaration of a char or short argument
gives the correct address. Otherwise assume pcc gives the
address of the corresponding int, which is not the same on a
big-endian machine. */
#ifndef BELIEVE_PCC_PROMOTION
#define BELIEVE_PCC_PROMOTION 0
#endif
/* Remember what we deduced to be the source language of this psymtab. */
static enum language psymtab_language = language_unknown;
/* Nonzero means give verbose info on gdb action. From main.c. */
extern int info_verbose;
/* The BFD for this file -- implicit parameter to next_symbol_text. */
static bfd *symfile_bfd;
/* The size of each symbol in the symbol file (in external form).
This is set by dbx_symfile_read when building psymtabs, and by
dbx_psymtab_to_symtab when building symtabs. */
static unsigned symbol_size;
/* This is the offset of the symbol table in the executable file */
static unsigned symbol_table_offset;
/* This is the offset of the string table in the executable file */
static unsigned string_table_offset;
/* For elf+stab executables, the n_strx field is not a simple index
into the string table. Instead, each .o file has a base offset
in the string table, and the associated symbols contain offsets
from this base. The following two variables contain the base
offset for the current and next .o files. */
static unsigned int file_string_table_offset;
static unsigned int next_file_string_table_offset;
/* Complaints about the symbols we have encountered. */
struct complaint lbrac_complaint =
{"bad block start address patched", 0, 0};
struct complaint string_table_offset_complaint =
{"bad string table offset in symbol %d", 0, 0};
struct complaint unknown_symtype_complaint =
{"unknown symbol type %s", 0, 0};
struct complaint unknown_symchar_complaint =
{"unknown symbol descriptor `%c'", 0, 0};
struct complaint lbrac_rbrac_complaint =
{"block start larger than block end", 0, 0};
struct complaint lbrac_unmatched_complaint =
{"unmatched N_LBRAC before symtab pos %d", 0, 0};
struct complaint lbrac_mismatch_complaint =
{"N_LBRAC/N_RBRAC symbol mismatch at symtab pos %d", 0, 0};
struct complaint repeated_header_complaint =
{"\"repeated\" header file not previously seen, at symtab pos %d", 0, 0};
struct complaint repeated_header_name_complaint =
{"\"repeated\" header file not previously seen, named %s", 0, 0};
/* During initial symbol readin, we need to have a structure to keep
track of which psymtabs have which bincls in them. This structure
is used during readin to setup the list of dependencies within each
partial symbol table. */
struct header_file_location
{
char *name; /* Name of header file */
int instance; /* See above */
struct partial_symtab *pst; /* Partial symtab that has the
BINCL/EINCL defs for this file */
};
/* The actual list and controling variables */
static struct header_file_location *bincl_list, *next_bincl;
static int bincls_allocated;
/* Local function prototypes */
static void
free_header_files PARAMS ((void));
static void
init_header_files PARAMS ((void));
static void
read_ofile_symtab PARAMS ((struct partial_symtab *));
static void
dbx_psymtab_to_symtab PARAMS ((struct partial_symtab *));
static void
dbx_psymtab_to_symtab_1 PARAMS ((struct partial_symtab *));
static void
read_dbx_symtab PARAMS ((struct section_offsets *, struct objfile *,
CORE_ADDR, int));
static void
free_bincl_list PARAMS ((struct objfile *));
static struct partial_symtab *
find_corresponding_bincl_psymtab PARAMS ((char *, int));
static void
add_bincl_to_list PARAMS ((struct partial_symtab *, char *, int));
static void
init_bincl_list PARAMS ((int, struct objfile *));
static void
init_psymbol_list PARAMS ((struct objfile *));
static char *
dbx_next_symbol_text PARAMS ((void));
static void
fill_symbuf PARAMS ((bfd *));
static void
dbx_symfile_init PARAMS ((struct objfile *));
static void
dbx_new_init PARAMS ((struct objfile *));
static void
dbx_symfile_read PARAMS ((struct objfile *, struct section_offsets *, int));
static void
dbx_symfile_finish PARAMS ((struct objfile *));
static void
record_minimal_symbol PARAMS ((char *, CORE_ADDR, int, struct objfile *));
static void
add_new_header_file PARAMS ((char *, int));
static void
add_old_header_file PARAMS ((char *, int));
static void
add_this_object_header_file PARAMS ((int));
/* Free up old header file tables */
static void
free_header_files ()
{
register int i;
if (header_files != NULL)
{
for (i = 0; i < n_header_files; i++)
{
free (header_files[i].name);
}
free ((PTR)header_files);
header_files = NULL;
n_header_files = 0;
}
if (this_object_header_files)
{
free ((PTR)this_object_header_files);
this_object_header_files = NULL;
}
n_allocated_header_files = 0;
n_allocated_this_object_header_files = 0;
}
/* Allocate new header file tables */
static void
init_header_files ()
{
n_header_files = 0;
n_allocated_header_files = 10;
header_files = (struct header_file *)
xmalloc (10 * sizeof (struct header_file));
n_allocated_this_object_header_files = 10;
this_object_header_files = (int *) xmalloc (10 * sizeof (int));
}
/* Add header file number I for this object file
at the next successive FILENUM. */
static void
add_this_object_header_file (i)
int i;
{
if (n_this_object_header_files == n_allocated_this_object_header_files)
{
n_allocated_this_object_header_files *= 2;
this_object_header_files
= (int *) xrealloc ((char *) this_object_header_files,
n_allocated_this_object_header_files * sizeof (int));
}
this_object_header_files[n_this_object_header_files++] = i;
}
/* Add to this file an "old" header file, one already seen in
a previous object file. NAME is the header file's name.
INSTANCE is its instance code, to select among multiple
symbol tables for the same header file. */
static void
add_old_header_file (name, instance)
char *name;
int instance;
{
register struct header_file *p = header_files;
register int i;
for (i = 0; i < n_header_files; i++)
if (STREQ (p[i].name, name) && instance == p[i].instance)
{
add_this_object_header_file (i);
return;
}
complain (&repeated_header_complaint, symnum);
complain (&repeated_header_name_complaint, name);
}
/* Add to this file a "new" header file: definitions for its types follow.
NAME is the header file's name.
Most often this happens only once for each distinct header file,
but not necessarily. If it happens more than once, INSTANCE has
a different value each time, and references to the header file
use INSTANCE values to select among them.
dbx output contains "begin" and "end" markers for each new header file,
but at this level we just need to know which files there have been;
so we record the file when its "begin" is seen and ignore the "end". */
static void
add_new_header_file (name, instance)
char *name;
int instance;
{
register int i;
/* Make sure there is room for one more header file. */
if (n_header_files == n_allocated_header_files)
{
n_allocated_header_files *= 2;
header_files = (struct header_file *)
xrealloc ((char *) header_files,
(n_allocated_header_files * sizeof (struct header_file)));
}
/* Create an entry for this header file. */
i = n_header_files++;
header_files[i].name = savestring (name, strlen(name));
header_files[i].instance = instance;
header_files[i].length = 10;
header_files[i].vector
= (struct type **) xmalloc (10 * sizeof (struct type *));
memset (header_files[i].vector, 0, 10 * sizeof (struct type *));
add_this_object_header_file (i);
}
#if 0
static struct type **
explicit_lookup_type (real_filenum, index)
int real_filenum, index;
{
register struct header_file *f = &header_files[real_filenum];
if (index >= f->length)
{
f->length *= 2;
f->vector = (struct type **)
xrealloc (f->vector, f->length * sizeof (struct type *));
memset (&f->vector[f->length / 2],
'\0', f->length * sizeof (struct type *) / 2);
}
return &f->vector[index];
}
#endif
static void
record_minimal_symbol (name, address, type, objfile)
char *name;
CORE_ADDR address;
int type;
struct objfile *objfile;
{
enum minimal_symbol_type ms_type;
switch (type)
{
case N_TEXT | N_EXT: ms_type = mst_text; break;
case N_DATA | N_EXT: ms_type = mst_data; break;
case N_BSS | N_EXT: ms_type = mst_bss; break;
case N_ABS | N_EXT: ms_type = mst_abs; break;
#ifdef N_SETV
case N_SETV | N_EXT: ms_type = mst_data; break;
case N_SETV:
/* I don't think this type actually exists; since a N_SETV is the result
of going over many .o files, it doesn't make sense to have one
file local. */
ms_type = mst_file_data;
break;
#endif
case N_TEXT:
/* Don't put gcc_compiled, __gnu_compiled_cplus, and friends into
the minimal symbols, because if there is also another symbol
at the same address (e.g. the first function of the file),
lookup_minimal_symbol_by_pc would have no way of getting the
right one. */
if (name[0] == 'g'
&& (strcmp (name, GCC_COMPILED_FLAG_SYMBOL) == 0
|| strcmp (name, GCC2_COMPILED_FLAG_SYMBOL) == 0))
return;
{
char *tempstring = name;
if (tempstring[0] == bfd_get_symbol_leading_char (objfile->obfd))
++tempstring;
if (STREQN (tempstring, "__gnu_compiled", 14))
return;
}
case N_NBTEXT:
case N_FN:
case N_FN_SEQ:
ms_type = mst_file_text;
break;
case N_DATA:
ms_type = mst_file_data;
/* Check for __DYNAMIC, which is used by Sun shared libraries.
Record it as global even if it's local, not global, so
lookup_minimal_symbol can find it. We don't check symbol_leading_char
because for SunOS4 it always is '_'. */
if (name[8] == 'C' && STREQ ("__DYNAMIC", name))
ms_type = mst_data;
/* Same with virtual function tables, both global and static. */
{
char *tempstring = name;
if (tempstring[0] == bfd_get_symbol_leading_char (objfile->obfd))
++tempstring;
if (VTBL_PREFIX_P ((tempstring)))
ms_type = mst_data;
}
break;
case N_BSS:
ms_type = mst_file_bss;
break;
default: ms_type = mst_unknown; break;
}
prim_record_minimal_symbol
(obsavestring (name, strlen (name), &objfile -> symbol_obstack),
address,
ms_type);
}
/* Scan and build partial symbols for a symbol file.
We have been initialized by a call to dbx_symfile_init, which
put all the relevant info into a "struct dbx_symfile_info",
hung off the objfile structure.
SECTION_OFFSETS contains offsets relative to which the symbols in the
various sections are (depending where the sections were actually loaded).
MAINLINE is true if we are reading the main symbol
table (as opposed to a shared lib or dynamically loaded file). */
static void
dbx_symfile_read (objfile, section_offsets, mainline)
struct objfile *objfile;
struct section_offsets *section_offsets;
int mainline; /* FIXME comments above */
{
bfd *sym_bfd;
int val;
struct cleanup *back_to;
sym_bfd = objfile->obfd;
val = bfd_seek (objfile->obfd, DBX_SYMTAB_OFFSET (objfile), SEEK_SET);
if (val < 0)
perror_with_name (objfile->name);
/* If we are reinitializing, or if we have never loaded syms yet, init */
if (mainline || objfile->global_psymbols.size == 0 || objfile->static_psymbols.size == 0)
init_psymbol_list (objfile);
symbol_size = DBX_SYMBOL_SIZE (objfile);
symbol_table_offset = DBX_SYMTAB_OFFSET (objfile);
pending_blocks = 0;
back_to = make_cleanup (really_free_pendings, 0);
init_minimal_symbol_collection ();
make_cleanup (discard_minimal_symbols, 0);
/* Now that the symbol table data of the executable file are all in core,
process them and define symbols accordingly. */
read_dbx_symtab (section_offsets, objfile,
bfd_section_vma (sym_bfd, DBX_TEXT_SECT (objfile)),
bfd_section_size (sym_bfd, DBX_TEXT_SECT (objfile)));
/* Install any minimal symbols that have been collected as the current
minimal symbols for this objfile. */
install_minimal_symbols (objfile);
if (!have_partial_symbols ()) {
wrap_here ("");
printf_filtered ("(no debugging symbols found)...");
wrap_here ("");
}
do_cleanups (back_to);
}
/* Initialize anything that needs initializing when a completely new
symbol file is specified (not just adding some symbols from another
file, e.g. a shared library). */
static void
dbx_new_init (ignore)
struct objfile *ignore;
{
stabsread_new_init ();
buildsym_new_init ();
init_header_files ();
}
/* dbx_symfile_init ()
is the dbx-specific initialization routine for reading symbols.
It is passed a struct objfile which contains, among other things,
the BFD for the file whose symbols are being read, and a slot for a pointer
to "private data" which we fill with goodies.
We read the string table into malloc'd space and stash a pointer to it.
Since BFD doesn't know how to read debug symbols in a format-independent
way (and may never do so...), we have to do it ourselves. We will never
be called unless this is an a.out (or very similar) file.
FIXME, there should be a cleaner peephole into the BFD environment here. */
#define DBX_STRINGTAB_SIZE_SIZE sizeof(long) /* FIXME */
static void
dbx_symfile_init (objfile)
struct objfile *objfile;
{
int val;
bfd *sym_bfd = objfile->obfd;
char *name = bfd_get_filename (sym_bfd);
unsigned char size_temp[DBX_STRINGTAB_SIZE_SIZE];
/* Allocate struct to keep track of the symfile */
objfile->sym_stab_info = (PTR)
xmmalloc (objfile -> md, sizeof (struct dbx_symfile_info));
/* FIXME POKING INSIDE BFD DATA STRUCTURES */
#define STRING_TABLE_OFFSET (sym_bfd->origin + obj_str_filepos (sym_bfd))
#define SYMBOL_TABLE_OFFSET (sym_bfd->origin + obj_sym_filepos (sym_bfd))
/* FIXME POKING INSIDE BFD DATA STRUCTURES */
DBX_SYMFILE_INFO (objfile)->stab_section_info = NULL;
DBX_TEXT_SECT (objfile) = bfd_get_section_by_name (sym_bfd, ".text");
if (!DBX_TEXT_SECT (objfile))
error ("Can't find .text section in symbol file");
DBX_SYMBOL_SIZE (objfile) = obj_symbol_entry_size (sym_bfd);
DBX_SYMCOUNT (objfile) = bfd_get_symcount (sym_bfd);
DBX_SYMTAB_OFFSET (objfile) = SYMBOL_TABLE_OFFSET;
/* Read the string table and stash it away in the psymbol_obstack. It is
only needed as long as we need to expand psymbols into full symbols,
so when we blow away the psymbol the string table goes away as well.
Note that gdb used to use the results of attempting to malloc the
string table, based on the size it read, as a form of sanity check
for botched byte swapping, on the theory that a byte swapped string
table size would be so totally bogus that the malloc would fail. Now
that we put in on the psymbol_obstack, we can't do this since gdb gets
a fatal error (out of virtual memory) if the size is bogus. We can
however at least check to see if the size is less than the size of
the size field itself, or larger than the size of the entire file.
Note that all valid string tables have a size greater than zero, since
the bytes used to hold the size are included in the count. */
if (STRING_TABLE_OFFSET == 0)
{
/* It appears that with the existing bfd code, STRING_TABLE_OFFSET
will never be zero, even when there is no string table. This
would appear to be a bug in bfd. */
DBX_STRINGTAB_SIZE (objfile) = 0;
DBX_STRINGTAB (objfile) = NULL;
}
else
{
val = bfd_seek (sym_bfd, STRING_TABLE_OFFSET, SEEK_SET);
if (val < 0)
perror_with_name (name);
memset ((PTR) size_temp, 0, sizeof (size_temp));
val = bfd_read ((PTR) size_temp, sizeof (size_temp), 1, sym_bfd);
if (val < 0)
{
perror_with_name (name);
}
else if (val == 0)
{
/* With the existing bfd code, STRING_TABLE_OFFSET will be set to
EOF if there is no string table, and attempting to read the size
from EOF will read zero bytes. */
DBX_STRINGTAB_SIZE (objfile) = 0;
DBX_STRINGTAB (objfile) = NULL;
}
else
{
/* Read some data that would appear to be the string table size.
If there really is a string table, then it is probably the right
size. Byteswap if necessary and validate the size. Note that
the minimum is DBX_STRINGTAB_SIZE_SIZE. If we just read some
random data that happened to be at STRING_TABLE_OFFSET, because
bfd can't tell us there is no string table, the sanity checks may
or may not catch this. */
DBX_STRINGTAB_SIZE (objfile) = bfd_h_get_32 (sym_bfd, size_temp);
if (DBX_STRINGTAB_SIZE (objfile) < sizeof (size_temp)
|| DBX_STRINGTAB_SIZE (objfile) > bfd_get_size (sym_bfd))
error ("ridiculous string table size (%d bytes).",
DBX_STRINGTAB_SIZE (objfile));
DBX_STRINGTAB (objfile) =
(char *) obstack_alloc (&objfile -> psymbol_obstack,
DBX_STRINGTAB_SIZE (objfile));
/* Now read in the string table in one big gulp. */
val = bfd_seek (sym_bfd, STRING_TABLE_OFFSET, SEEK_SET);
if (val < 0)
perror_with_name (name);
val = bfd_read (DBX_STRINGTAB (objfile), DBX_STRINGTAB_SIZE (objfile), 1,
sym_bfd);
if (val != DBX_STRINGTAB_SIZE (objfile))
perror_with_name (name);
}
}
}
/* Perform any local cleanups required when we are done with a particular
objfile. I.E, we are in the process of discarding all symbol information
for an objfile, freeing up all memory held for it, and unlinking the
objfile struct from the global list of known objfiles. */
static void
dbx_symfile_finish (objfile)
struct objfile *objfile;
{
if (objfile->sym_stab_info != NULL)
{
mfree (objfile -> md, objfile->sym_stab_info);
}
free_header_files ();
}
/* Buffer for reading the symbol table entries. */
static struct internal_nlist symbuf[4096];
static int symbuf_idx;
static int symbuf_end;
/* Name of last function encountered. Used in Solaris to approximate
object file boundaries. */
static char *last_function_name;
/* The address in memory of the string table of the object file we are
reading (which might not be the "main" object file, but might be a
shared library or some other dynamically loaded thing). This is set
by read_dbx_symtab when building psymtabs, and by read_ofile_symtab
when building symtabs, and is used only by next_symbol_text. */
static char *stringtab_global;
/* Refill the symbol table input buffer
and set the variables that control fetching entries from it.
Reports an error if no data available.
This function can read past the end of the symbol table
(into the string table) but this does no harm. */
static void
fill_symbuf (sym_bfd)
bfd *sym_bfd;
{
int nbytes = bfd_read ((PTR)symbuf, sizeof (symbuf), 1, sym_bfd);
if (nbytes < 0)
perror_with_name (bfd_get_filename (sym_bfd));
else if (nbytes == 0)
error ("Premature end of file reading symbol table");
symbuf_end = nbytes / symbol_size;
symbuf_idx = 0;
}
#define SWAP_SYMBOL(symp, abfd) \
{ \
(symp)->n_strx = bfd_h_get_32(abfd, \
(unsigned char *)&(symp)->n_strx); \
(symp)->n_desc = bfd_h_get_16 (abfd, \
(unsigned char *)&(symp)->n_desc); \
(symp)->n_value = bfd_h_get_32 (abfd, \
(unsigned char *)&(symp)->n_value); \
}
/* Invariant: The symbol pointed to by symbuf_idx is the first one
that hasn't been swapped. Swap the symbol at the same time
that symbuf_idx is incremented. */
/* dbx allows the text of a symbol name to be continued into the
next symbol name! When such a continuation is encountered
(a \ at the end of the text of a name)
call this function to get the continuation. */
static char *
dbx_next_symbol_text ()
{
if (symbuf_idx == symbuf_end)
fill_symbuf (symfile_bfd);
symnum++;
SWAP_SYMBOL(&symbuf[symbuf_idx], symfile_bfd);
return symbuf[symbuf_idx++].n_strx + stringtab_global
+ file_string_table_offset;
}
/* Initializes storage for all of the partial symbols that will be
created by read_dbx_symtab and subsidiaries. */
static void
init_psymbol_list (objfile)
struct objfile *objfile;
{
/* Free any previously allocated psymbol lists. */
if (objfile -> global_psymbols.list)
mfree (objfile -> md, (PTR)objfile -> global_psymbols.list);
if (objfile -> static_psymbols.list)
mfree (objfile -> md, (PTR)objfile -> static_psymbols.list);
/* Current best guess is that there are approximately a twentieth
of the total symbols (in a debugging file) are global or static
oriented symbols */
objfile -> global_psymbols.size = DBX_SYMCOUNT (objfile) / 10;
objfile -> static_psymbols.size = DBX_SYMCOUNT (objfile) / 10;
objfile -> global_psymbols.next = objfile -> global_psymbols.list = (struct partial_symbol *)
xmmalloc (objfile -> md, objfile -> global_psymbols.size * sizeof (struct partial_symbol));
objfile -> static_psymbols.next = objfile -> static_psymbols.list = (struct partial_symbol *)
xmmalloc (objfile -> md, objfile -> static_psymbols.size * sizeof (struct partial_symbol));
}
/* Initialize the list of bincls to contain none and have some
allocated. */
static void
init_bincl_list (number, objfile)
int number;
struct objfile *objfile;
{
bincls_allocated = number;
next_bincl = bincl_list = (struct header_file_location *)
xmmalloc (objfile -> md, bincls_allocated * sizeof(struct header_file_location));
}
/* Add a bincl to the list. */
static void
add_bincl_to_list (pst, name, instance)
struct partial_symtab *pst;
char *name;
int instance;
{
if (next_bincl >= bincl_list + bincls_allocated)
{
int offset = next_bincl - bincl_list;
bincls_allocated *= 2;
bincl_list = (struct header_file_location *)
xmrealloc (pst->objfile->md, (char *)bincl_list,
bincls_allocated * sizeof (struct header_file_location));
next_bincl = bincl_list + offset;
}
next_bincl->pst = pst;
next_bincl->instance = instance;
next_bincl++->name = name;
}
/* Given a name, value pair, find the corresponding
bincl in the list. Return the partial symtab associated
with that header_file_location. */
static struct partial_symtab *
find_corresponding_bincl_psymtab (name, instance)
char *name;
int instance;
{
struct header_file_location *bincl;
for (bincl = bincl_list; bincl < next_bincl; bincl++)
if (bincl->instance == instance
&& STREQ (name, bincl->name))
return bincl->pst;
return (struct partial_symtab *) 0;
}
/* Free the storage allocated for the bincl list. */
static void
free_bincl_list (objfile)
struct objfile *objfile;
{
mfree (objfile -> md, (PTR)bincl_list);
bincls_allocated = 0;
}
/* Given pointers to an a.out symbol table in core containing dbx
style data, setup partial_symtab's describing each source file for
which debugging information is available.
SYMFILE_NAME is the name of the file we are reading from
and SECTION_OFFSETS is the set of offsets for the various sections
of the file (a set of zeros if the mainline program). */
static void
read_dbx_symtab (section_offsets, objfile, text_addr, text_size)
struct section_offsets *section_offsets;
struct objfile *objfile;
CORE_ADDR text_addr;
int text_size;
{
register struct internal_nlist *bufp = 0; /* =0 avoids gcc -Wall glitch */
register char *namestring;
int nsl;
int past_first_source_file = 0;
CORE_ADDR last_o_file_start = 0;
struct cleanup *back_to;
bfd *abfd;
/* End of the text segment of the executable file. */
CORE_ADDR end_of_text_addr;
/* Current partial symtab */
struct partial_symtab *pst;
/* List of current psymtab's include files */
char **psymtab_include_list;
int includes_allocated;
int includes_used;
/* Index within current psymtab dependency list */
struct partial_symtab **dependency_list;
int dependencies_used, dependencies_allocated;
/* FIXME. We probably want to change stringtab_global rather than add this
while processing every symbol entry. FIXME. */
file_string_table_offset = 0;
next_file_string_table_offset = 0;
stringtab_global = DBX_STRINGTAB (objfile);
pst = (struct partial_symtab *) 0;
includes_allocated = 30;
includes_used = 0;
psymtab_include_list = (char **) alloca (includes_allocated *
sizeof (char *));
dependencies_allocated = 30;
dependencies_used = 0;
dependency_list =
(struct partial_symtab **) alloca (dependencies_allocated *
sizeof (struct partial_symtab *));
/* Init bincl list */
init_bincl_list (20, objfile);
back_to = make_cleanup (free_bincl_list, objfile);
last_source_file = NULL;
#ifdef END_OF_TEXT_DEFAULT
end_of_text_addr = END_OF_TEXT_DEFAULT;
#else
end_of_text_addr = text_addr + section_offsets->offsets[SECT_OFF_TEXT]
+ text_size; /* Relocate */
#endif
symfile_bfd = objfile->obfd; /* For next_text_symbol */
abfd = objfile->obfd;
symbuf_end = symbuf_idx = 0;
next_symbol_text_func = dbx_next_symbol_text;
for (symnum = 0; symnum < DBX_SYMCOUNT (objfile); symnum++)
{
/* Get the symbol for this run and pull out some info */
QUIT; /* allow this to be interruptable */
if (symbuf_idx == symbuf_end)
fill_symbuf (abfd);
bufp = &symbuf[symbuf_idx++];
/*
* Special case to speed up readin.
*/
if (bufp->n_type == (unsigned char)N_SLINE) continue;
SWAP_SYMBOL (bufp, abfd);
/* Ok. There is a lot of code duplicated in the rest of this
switch statement (for efficiency reasons). Since I don't
like duplicating code, I will do my penance here, and
describe the code which is duplicated:
*) The assignment to namestring.
*) The call to strchr.
*) The addition of a partial symbol the the two partial
symbol lists. This last is a large section of code, so
I've imbedded it in the following macro.
*/
/* Set namestring based on bufp. If the string table index is invalid,
give a fake name, and print a single error message per symbol file read,
rather than abort the symbol reading or flood the user with messages. */
/*FIXME: Too many adds and indirections in here for the inner loop. */
#define SET_NAMESTRING()\
if (((unsigned)bufp->n_strx + file_string_table_offset) >= \
DBX_STRINGTAB_SIZE (objfile)) { \
complain (&string_table_offset_complaint, symnum); \
namestring = "foo"; \
} else \
namestring = bufp->n_strx + file_string_table_offset + \
DBX_STRINGTAB (objfile)
#define CUR_SYMBOL_TYPE bufp->n_type
#define CUR_SYMBOL_VALUE bufp->n_value
#define DBXREAD_ONLY
#define START_PSYMTAB(ofile,secoff,fname,low,symoff,global_syms,static_syms)\
start_psymtab(ofile, secoff, fname, low, symoff, global_syms, static_syms)
#define END_PSYMTAB(pst,ilist,ninc,c_off,c_text,dep_list,n_deps)\
end_psymtab(pst,ilist,ninc,c_off,c_text,dep_list,n_deps)
#include "partial-stab.h"
}
/* If there's stuff to be cleaned up, clean it up. */
if (DBX_SYMCOUNT (objfile) > 0 /* We have some syms */
/*FIXME, does this have a bug at start address 0? */
&& last_o_file_start
&& objfile -> ei.entry_point < bufp->n_value
&& objfile -> ei.entry_point >= last_o_file_start)
{
objfile -> ei.entry_file_lowpc = last_o_file_start;
objfile -> ei.entry_file_highpc = bufp->n_value;
}
if (pst)
{
end_psymtab (pst, psymtab_include_list, includes_used,
symnum * symbol_size, end_of_text_addr,
dependency_list, dependencies_used);
}
do_cleanups (back_to);
}
/* Allocate and partially fill a partial symtab. It will be
completely filled at the end of the symbol list.
SYMFILE_NAME is the name of the symbol-file we are reading from, and ADDR
is the address relative to which its symbols are (incremental) or 0
(normal). */
struct partial_symtab *
start_psymtab (objfile, section_offsets,
filename, textlow, ldsymoff, global_syms, static_syms)
struct objfile *objfile;
struct section_offsets *section_offsets;
char *filename;
CORE_ADDR textlow;
int ldsymoff;
struct partial_symbol *global_syms;
struct partial_symbol *static_syms;
{
struct partial_symtab *result =
start_psymtab_common(objfile, section_offsets,
filename, textlow, global_syms, static_syms);
result->read_symtab_private = (char *)
obstack_alloc (&objfile -> psymbol_obstack, sizeof (struct symloc));
LDSYMOFF(result) = ldsymoff;
result->read_symtab = dbx_psymtab_to_symtab;
SYMBOL_SIZE(result) = symbol_size;
SYMBOL_OFFSET(result) = symbol_table_offset;
STRING_OFFSET(result) = string_table_offset;
FILE_STRING_OFFSET(result) = file_string_table_offset;
/* If we're handling an ELF file, drag some section-relocation info
for this source file out of the ELF symbol table, to compensate for
Sun brain death. This replaces the section_offsets in this psymtab,
if successful. */
elfstab_offset_sections (objfile, result);
/* Deduce the source language from the filename for this psymtab. */
psymtab_language = deduce_language_from_filename (filename);
return result;
}
/* Close off the current usage of PST.
Returns PST or NULL if the partial symtab was empty and thrown away.
FIXME: List variables and peculiarities of same. */
struct partial_symtab *
end_psymtab (pst, include_list, num_includes, capping_symbol_offset,
capping_text, dependency_list, number_dependencies)
struct partial_symtab *pst;
char **include_list;
int num_includes;
int capping_symbol_offset;
CORE_ADDR capping_text;
struct partial_symtab **dependency_list;
int number_dependencies;
/* struct partial_symbol *capping_global, *capping_static;*/
{
int i;
struct partial_symtab *p1;
struct objfile *objfile = pst -> objfile;
if (capping_symbol_offset != -1)
LDSYMLEN(pst) = capping_symbol_offset - LDSYMOFF(pst);
pst->texthigh = capping_text;
/* Under Solaris, the N_SO symbols always have a value of 0,
instead of the usual address of the .o file. Therefore,
we have to do some tricks to fill in texthigh and textlow.
The first trick is in partial-stab.h: if we see a static
or global function, and the textlow for the current pst
is still 0, then we use that function's address for
the textlow of the pst.
Now, to fill in texthigh, we remember the last function seen
in the .o file (also in partial-stab.h). Also, there's a hack in
bfd/elf.c and gdb/elfread.c to pass the ELF st_size field
to here via the misc_info field. Therefore, we can fill in
a reliable texthigh by taking the address plus size of the
last function in the file.
Unfortunately, that does not cover the case where the last function
in the file is static. See the paragraph below for more comments
on this situation.
Finally, if we have a valid textlow for the current file, we run
down the partial_symtab_list filling in previous texthighs that
are still unknown. */
if (pst->texthigh == 0 && last_function_name) {
char *p;
int n;
struct minimal_symbol *minsym;
p = strchr (last_function_name, ':');
if (p == NULL)
p = last_function_name;
n = p - last_function_name;
p = alloca (n + 1);
strncpy (p, last_function_name, n);
p[n] = 0;
minsym = lookup_minimal_symbol (p, objfile);
if (minsym) {
pst->texthigh = SYMBOL_VALUE_ADDRESS (minsym) +
(long) MSYMBOL_INFO (minsym);
} else {
/* This file ends with a static function, and it's
difficult to imagine how hard it would be to track down
the elf symbol. Luckily, most of the time no one will notice,
since the next file will likely be compiled with -g, so
the code below will copy the first fuction's start address
back to our texthigh variable. (Also, if this file is the
last one in a dynamically linked program, texthigh already
has the right value.) If the next file isn't compiled
with -g, then the last function in this file winds up owning
all of the text space up to the next -g file, or the end (minus
shared libraries). This only matters for single stepping,
and even then it will still work, except that it will single
step through all of the covered functions, instead of setting
breakpoints around them as it usualy does. This makes it
pretty slow, but at least it doesn't fail.
We can fix this with a fairly big change to bfd, but we need
to coordinate better with Cygnus if we want to do that. FIXME. */
}
last_function_name = NULL;
}
/* this test will be true if the last .o file is only data */
if (pst->textlow == 0)
pst->textlow = pst->texthigh;
/* If we know our own starting text address, then walk through all other
psymtabs for this objfile, and if any didn't know their ending text
address, set it to our starting address. Take care to not set our
own ending address to our starting address, nor to set addresses on
`dependency' files that have both textlow and texthigh zero. */
if (pst->textlow) {
ALL_OBJFILE_PSYMTABS (objfile, p1) {
if (p1->texthigh == 0 && p1->textlow != 0 && p1 != pst) {
p1->texthigh = pst->textlow;
/* if this file has only data, then make textlow match texthigh */
if (p1->textlow == 0)
p1->textlow = p1->texthigh;
}
}
}
/* End of kludge for patching Solaris textlow and texthigh. */
pst->n_global_syms =
objfile->global_psymbols.next - (objfile->global_psymbols.list + pst->globals_offset);
pst->n_static_syms =
objfile->static_psymbols.next - (objfile->static_psymbols.list + pst->statics_offset);
pst->number_of_dependencies = number_dependencies;
if (number_dependencies)
{
pst->dependencies = (struct partial_symtab **)
obstack_alloc (&objfile->psymbol_obstack,
number_dependencies * sizeof (struct partial_symtab *));
memcpy (pst->dependencies, dependency_list,
number_dependencies * sizeof (struct partial_symtab *));
}
else
pst->dependencies = 0;
for (i = 0; i < num_includes; i++)
{
struct partial_symtab *subpst =
allocate_psymtab (include_list[i], objfile);
subpst->section_offsets = pst->section_offsets;
subpst->read_symtab_private =
(char *) obstack_alloc (&objfile->psymbol_obstack,
sizeof (struct symloc));
LDSYMOFF(subpst) =
LDSYMLEN(subpst) =
subpst->textlow =
subpst->texthigh = 0;
/* We could save slight bits of space by only making one of these,
shared by the entire set of include files. FIXME-someday. */
subpst->dependencies = (struct partial_symtab **)
obstack_alloc (&objfile->psymbol_obstack,
sizeof (struct partial_symtab *));
subpst->dependencies[0] = pst;
subpst->number_of_dependencies = 1;
subpst->globals_offset =
subpst->n_global_syms =
subpst->statics_offset =
subpst->n_static_syms = 0;
subpst->readin = 0;
subpst->symtab = 0;
subpst->read_symtab = pst->read_symtab;
}
sort_pst_symbols (pst);
/* If there is already a psymtab or symtab for a file of this name, remove it.
(If there is a symtab, more drastic things also happen.)
This happens in VxWorks. */
free_named_symtabs (pst->filename);
if (num_includes == 0
&& number_dependencies == 0
&& pst->n_global_syms == 0
&& pst->n_static_syms == 0) {
/* Throw away this psymtab, it's empty. We can't deallocate it, since
it is on the obstack, but we can forget to chain it on the list. */
struct partial_symtab *prev_pst;
/* First, snip it out of the psymtab chain */
if (pst->objfile->psymtabs == pst)
pst->objfile->psymtabs = pst->next;
else
for (prev_pst = pst->objfile->psymtabs; prev_pst; prev_pst = pst->next)
if (prev_pst->next == pst)
prev_pst->next = pst->next;
/* Next, put it on a free list for recycling */
pst->next = pst->objfile->free_psymtabs;
pst->objfile->free_psymtabs = pst;
/* Indicate that psymtab was thrown away. */
pst = (struct partial_symtab *)NULL;
}
return pst;
}
static void
dbx_psymtab_to_symtab_1 (pst)
struct partial_symtab *pst;
{
struct cleanup *old_chain;
int i;
if (!pst)
return;
if (pst->readin)
{
fprintf_unfiltered (gdb_stderr, "Psymtab for %s already read in. Shouldn't happen.\n",
pst->filename);
return;
}
/* Read in all partial symtabs on which this one is dependent */
for (i = 0; i < pst->number_of_dependencies; i++)
if (!pst->dependencies[i]->readin)
{
/* Inform about additional files that need to be read in. */
if (info_verbose)
{
fputs_filtered (" ", gdb_stdout);
wrap_here ("");
fputs_filtered ("and ", gdb_stdout);
wrap_here ("");
printf_filtered ("%s...", pst->dependencies[i]->filename);
wrap_here (""); /* Flush output */
gdb_flush (gdb_stdout);
}
dbx_psymtab_to_symtab_1 (pst->dependencies[i]);
}
if (LDSYMLEN(pst)) /* Otherwise it's a dummy */
{
/* Init stuff necessary for reading in symbols */
stabsread_init ();
buildsym_init ();
old_chain = make_cleanup (really_free_pendings, 0);
file_string_table_offset = FILE_STRING_OFFSET (pst);
symbol_size = SYMBOL_SIZE (pst);
/* Read in this file's symbols */
bfd_seek (pst->objfile->obfd, SYMBOL_OFFSET (pst), SEEK_SET);
read_ofile_symtab (pst);
sort_symtab_syms (pst->symtab);
do_cleanups (old_chain);
}
pst->readin = 1;
}
/* Read in all of the symbols for a given psymtab for real.
Be verbose about it if the user wants that. */
static void
dbx_psymtab_to_symtab (pst)
struct partial_symtab *pst;
{
bfd *sym_bfd;
if (!pst)
return;
if (pst->readin)
{
fprintf_unfiltered (gdb_stderr, "Psymtab for %s already read in. Shouldn't happen.\n",
pst->filename);
return;
}
if (LDSYMLEN(pst) || pst->number_of_dependencies)
{
/* Print the message now, before reading the string table,
to avoid disconcerting pauses. */
if (info_verbose)
{
printf_filtered ("Reading in symbols for %s...", pst->filename);
gdb_flush (gdb_stdout);
}
sym_bfd = pst->objfile->obfd;
next_symbol_text_func = dbx_next_symbol_text;
dbx_psymtab_to_symtab_1 (pst);
/* Match with global symbols. This only needs to be done once,
after all of the symtabs and dependencies have been read in. */
scan_file_globals (pst->objfile);
/* Finish up the debug error message. */
if (info_verbose)
printf_filtered ("done.\n");
}
}
/* Read in a defined section of a specific object file's symbols. */
static void
read_ofile_symtab (pst)
struct partial_symtab *pst;
{
register char *namestring;
register struct internal_nlist *bufp;
unsigned char type;
unsigned max_symnum;
register bfd *abfd;
struct objfile *objfile;
int sym_offset; /* Offset to start of symbols to read */
int sym_size; /* Size of symbols to read */
CORE_ADDR text_offset; /* Start of text segment for symbols */
int text_size; /* Size of text segment for symbols */
struct section_offsets *section_offsets;
objfile = pst->objfile;
sym_offset = LDSYMOFF(pst);
sym_size = LDSYMLEN(pst);
text_offset = pst->textlow;
text_size = pst->texthigh - pst->textlow;
section_offsets = pst->section_offsets;
current_objfile = objfile;
subfile_stack = NULL;
stringtab_global = DBX_STRINGTAB (objfile);
last_source_file = NULL;
abfd = objfile->obfd;
symfile_bfd = objfile->obfd; /* Implicit param to next_text_symbol */
symbuf_end = symbuf_idx = 0;
/* It is necessary to actually read one symbol *before* the start
of this symtab's symbols, because the GCC_COMPILED_FLAG_SYMBOL
occurs before the N_SO symbol.
Detecting this in read_dbx_symtab
would slow down initial readin, so we look for it here instead. */
if (!processing_acc_compilation && sym_offset >= (int)symbol_size)
{
bfd_seek (symfile_bfd, sym_offset - symbol_size, SEEK_CUR);
fill_symbuf (abfd);
bufp = &symbuf[symbuf_idx++];
SWAP_SYMBOL (bufp, abfd);
SET_NAMESTRING ();
processing_gcc_compilation = 0;
if (bufp->n_type == N_TEXT)
{
if (STREQ (namestring, GCC_COMPILED_FLAG_SYMBOL))
processing_gcc_compilation = 1;
else if (STREQ (namestring, GCC2_COMPILED_FLAG_SYMBOL))
processing_gcc_compilation = 2;
}
/* Try to select a C++ demangling based on the compilation unit
producer. */
if (processing_gcc_compilation)
{
if (AUTO_DEMANGLING)
{
set_demangling_style (GNU_DEMANGLING_STYLE_STRING);
}
}
}
else
{
/* The N_SO starting this symtab is the first symbol, so we
better not check the symbol before it. I'm not this can
happen, but it doesn't hurt to check for it. */
bfd_seek (symfile_bfd, sym_offset, SEEK_CUR);
processing_gcc_compilation = 0;
}
if (symbuf_idx == symbuf_end)
fill_symbuf (abfd);
bufp = &symbuf[symbuf_idx];
if (bufp->n_type != (unsigned char)N_SO)
error("First symbol in segment of executable not a source symbol");
max_symnum = sym_size / symbol_size;
for (symnum = 0;
symnum < max_symnum;
symnum++)
{
QUIT; /* Allow this to be interruptable */
if (symbuf_idx == symbuf_end)
fill_symbuf(abfd);
bufp = &symbuf[symbuf_idx++];
SWAP_SYMBOL (bufp, abfd);
type = bufp->n_type;
SET_NAMESTRING ();
if (type & N_STAB) {
process_one_symbol (type, bufp->n_desc, bufp->n_value,
namestring, section_offsets, objfile);
}
/* We skip checking for a new .o or -l file; that should never
happen in this routine. */
else if (type == N_TEXT)
{
/* I don't think this code will ever be executed, because
the GCC_COMPILED_FLAG_SYMBOL usually is right before
the N_SO symbol which starts this source file.
However, there is no reason not to accept
the GCC_COMPILED_FLAG_SYMBOL anywhere. */
if (STREQ (namestring, GCC_COMPILED_FLAG_SYMBOL))
processing_gcc_compilation = 1;
else if (STREQ (namestring, GCC2_COMPILED_FLAG_SYMBOL))
processing_gcc_compilation = 2;
if (AUTO_DEMANGLING)
{
set_demangling_style (GNU_DEMANGLING_STYLE_STRING);
}
}
else if (type & N_EXT || type == (unsigned char)N_TEXT
|| type == (unsigned char)N_NBTEXT
) {
/* Global symbol: see if we came across a dbx defintion for
a corresponding symbol. If so, store the value. Remove
syms from the chain when their values are stored, but
search the whole chain, as there may be several syms from
different files with the same name. */
/* This is probably not true. Since the files will be read
in one at a time, each reference to a global symbol will
be satisfied in each file as it appears. So we skip this
section. */
;
}
}
current_objfile = NULL;
/* In a Solaris elf file, this variable, which comes from the
value of the N_SO symbol, will still be 0. Luckily, text_offset,
which comes from pst->textlow is correct. */
if (last_source_start_addr == 0)
last_source_start_addr = text_offset;
pst->symtab = end_symtab (text_offset + text_size, 0, 0, objfile,
SECT_OFF_TEXT);
end_stabs ();
}
/* This handles a single symbol from the symbol-file, building symbols
into a GDB symtab. It takes these arguments and an implicit argument.
TYPE is the type field of the ".stab" symbol entry.
DESC is the desc field of the ".stab" entry.
VALU is the value field of the ".stab" entry.
NAME is the symbol name, in our address space.
SECTION_OFFSETS is a set of amounts by which the sections of this object
file were relocated when it was loaded into memory.
All symbols that refer
to memory locations need to be offset by these amounts.
OBJFILE is the object file from which we are reading symbols.
It is used in end_symtab. */
void
process_one_symbol (type, desc, valu, name, section_offsets, objfile)
int type, desc;
CORE_ADDR valu;
char *name;
struct section_offsets *section_offsets;
struct objfile *objfile;
{
#ifdef SUN_FIXED_LBRAC_BUG
/* If SUN_FIXED_LBRAC_BUG is defined, then it tells us whether we need
to correct the address of N_LBRAC's. If it is not defined, then
we never need to correct the addresses. */
/* This records the last pc address we've seen. We depend on there being
an SLINE or FUN or SO before the first LBRAC, since the variable does
not get reset in between reads of different symbol files. */
static CORE_ADDR last_pc_address;
#endif
register struct context_stack *new;
/* This remembers the address of the start of a function. It is used
because in Solaris 2, N_LBRAC, N_RBRAC, and N_SLINE entries are
relative to the current function's start address. On systems
other than Solaris 2, this just holds the SECT_OFF_TEXT value, and is
used to relocate these symbol types rather than SECTION_OFFSETS. */
static CORE_ADDR function_start_offset;
/* If this is nonzero, N_LBRAC, N_RBRAC, and N_SLINE entries are relative
to the function start address. */
int block_address_function_relative;
/* If this is nonzero, we've seen a non-gcc N_OPT symbol for this source
file. Used to detect the SunPRO solaris compiler. */
static int n_opt_found;
/* The stab type used for the definition of the last function.
N_STSYM or N_GSYM for SunOS4 acc; N_FUN for other compilers. */
static int function_stab_type = 0;
/* This is true for Solaris (and all other stabs-in-elf systems, hopefully,
since it would be silly to do things differently from Solaris), and
false for SunOS4 and other a.out file formats. */
block_address_function_relative =
0 == strncmp (bfd_get_target (objfile->obfd), "elf", 3);
if (!block_address_function_relative)
/* N_LBRAC, N_RBRAC and N_SLINE entries are not relative to the
function start address, so just use the text offset. */
function_start_offset = ANOFFSET (section_offsets, SECT_OFF_TEXT);
/* Something is wrong if we see real data before
seeing a source file name. */
if (last_source_file == NULL && type != (unsigned char)N_SO)
{
/* Ignore any symbols which appear before an N_SO symbol. Currently
no one puts symbols there, but we should deal gracefully with the
case. A complain()t might be in order (if !IGNORE_SYMBOL (type)),
but this should not be an error (). */
return;
}
switch (type)
{
case N_FUN:
case N_FNAME:
/* Relocate for dynamic loading */
valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
goto define_a_symbol;
case N_LBRAC:
/* This "symbol" just indicates the start of an inner lexical
context within a function. */
#if defined(BLOCK_ADDRESS_ABSOLUTE)
/* Relocate for dynamic loading (?). */
valu += function_start_offset;
#else
if (block_address_function_relative)
/* Relocate for Sun ELF acc fn-relative syms. */
valu += function_start_offset;
else
/* On most machines, the block addresses are relative to the
N_SO, the linker did not relocate them (sigh). */
valu += last_source_start_addr;
#endif
#ifdef SUN_FIXED_LBRAC_BUG
if (!SUN_FIXED_LBRAC_BUG && valu < last_pc_address) {
/* Patch current LBRAC pc value to match last handy pc value */
complain (&lbrac_complaint);
valu = last_pc_address;
}
#endif
new = push_context (desc, valu);
break;
case N_RBRAC:
/* This "symbol" just indicates the end of an inner lexical
context that was started with N_LBRAC. */
#if defined(BLOCK_ADDRESS_ABSOLUTE)
/* Relocate for dynamic loading (?). */
valu += function_start_offset;
#else
if (block_address_function_relative)
/* Relocate for Sun ELF acc fn-relative syms. */
valu += function_start_offset;
else
/* On most machines, the block addresses are relative to the
N_SO, the linker did not relocate them (sigh). */
valu += last_source_start_addr;
#endif
new = pop_context();
if (desc != new->depth)
complain (&lbrac_mismatch_complaint, symnum);
/* Some compilers put the variable decls inside of an
LBRAC/RBRAC block. This macro should be nonzero if this
is true. DESC is N_DESC from the N_RBRAC symbol.
GCC_P is true if we've detected the GCC_COMPILED_SYMBOL
or the GCC2_COMPILED_SYMBOL. */
#if !defined (VARIABLES_INSIDE_BLOCK)
#define VARIABLES_INSIDE_BLOCK(desc, gcc_p) 0
#endif
/* Can only use new->locals as local symbols here if we're in
gcc or on a machine that puts them before the lbrack. */
if (!VARIABLES_INSIDE_BLOCK(desc, processing_gcc_compilation))
local_symbols = new->locals;
/* If this is not the outermost LBRAC...RBRAC pair in the
function, its local symbols preceded it, and are the ones
just recovered from the context stack. Defined the block for them.
If this is the outermost LBRAC...RBRAC pair, there is no
need to do anything; leave the symbols that preceded it
to be attached to the function's own block. However, if
it is so, we need to indicate that we just moved outside
of the function. */
if (local_symbols
&& (context_stack_depth
> !VARIABLES_INSIDE_BLOCK(desc, processing_gcc_compilation)))
{
/* FIXME Muzzle a compiler bug that makes end < start. */
if (new->start_addr > valu)
{
complain (&lbrac_rbrac_complaint);
new->start_addr = valu;
}
/* Make a block for the local symbols within. */
finish_block (0, &local_symbols, new->old_blocks,
new->start_addr, valu, objfile);
}
else
{
within_function = 0;
}
if (VARIABLES_INSIDE_BLOCK(desc, processing_gcc_compilation))
/* Now pop locals of block just finished. */
local_symbols = new->locals;
break;
case N_FN:
case N_FN_SEQ:
/* This kind of symbol indicates the start of an object file. */
/* Relocate for dynamic loading */
valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
break;
case N_SO:
/* This type of symbol indicates the start of data
for one source file.
Finish the symbol table of the previous source file
(if any) and start accumulating a new symbol table. */
/* Relocate for dynamic loading */
valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
n_opt_found = 0;
#ifdef SUN_FIXED_LBRAC_BUG
last_pc_address = valu; /* Save for SunOS bug circumcision */
#endif
#ifdef PCC_SOL_BROKEN
/* pcc bug, occasionally puts out SO for SOL. */
if (context_stack_depth > 0)
{
start_subfile (name, NULL);
break;
}
#endif
if (last_source_file)
{
/* Check if previous symbol was also an N_SO (with some
sanity checks). If so, that one was actually the directory
name, and the current one is the real file name.
Patch things up. */
if (previous_stab_code == (unsigned char) N_SO)
{
patch_subfile_names (current_subfile, name);
break; /* Ignore repeated SOs */
}
end_symtab (valu, 0, 0, objfile, SECT_OFF_TEXT);
end_stabs ();
}
start_stabs ();
start_symtab (name, NULL, valu);
break;
case N_SOL:
/* This type of symbol indicates the start of data for
a sub-source-file, one whose contents were copied or
included in the compilation of the main source file
(whose name was given in the N_SO symbol.) */
/* Relocate for dynamic loading */
valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
start_subfile (name, current_subfile->dirname);
break;
case N_BINCL:
push_subfile ();
add_new_header_file (name, valu);
start_subfile (name, current_subfile->dirname);
break;
case N_EINCL:
start_subfile (pop_subfile (), current_subfile->dirname);
break;
case N_EXCL:
add_old_header_file (name, valu);
break;
case N_SLINE:
/* This type of "symbol" really just records
one line-number -- core-address correspondence.
Enter it in the line list for this symbol table. */
/* Relocate for dynamic loading and for ELF acc fn-relative syms. */
valu += function_start_offset;
#ifdef SUN_FIXED_LBRAC_BUG
last_pc_address = valu; /* Save for SunOS bug circumcision */
#endif
record_line (current_subfile, desc, valu);
break;
case N_BCOMM:
common_block_start (name, objfile);
break;
case N_ECOMM:
common_block_end (objfile);
break;
/* The following symbol types need to have the appropriate offset added
to their value; then we process symbol definitions in the name. */
case N_STSYM: /* Static symbol in data seg */
case N_LCSYM: /* Static symbol in BSS seg */
case N_ROSYM: /* Static symbol in Read-only data seg */
/* HORRID HACK DEPT. However, it's Sun's furgin' fault.
Solaris2's stabs-in-elf makes *most* symbols relative
but leaves a few absolute (at least for Solaris 2.1 and version
2.0.1 of the SunPRO compiler). N_STSYM and friends sit on the fence.
.stab "foo:S...",N_STSYM is absolute (ld relocates it)
.stab "foo:V...",N_STSYM is relative (section base subtracted).
This leaves us no choice but to search for the 'S' or 'V'...
(or pass the whole section_offsets stuff down ONE MORE function
call level, which we really don't want to do). */
{
char *p;
p = strchr (name, ':');
if (p != 0 && p[1] == 'S')
{
/* The linker relocated it. We don't want to add an
elfstab_offset_sections-type offset, but we *do* want
to add whatever solib.c passed to symbol_file_add as
addr (this is known to affect SunOS4, and I suspect ELF
too). Since elfstab_offset_sections currently does not
muck with the text offset (there is no Ttext.text
symbol), we can get addr from the text offset. If
elfstab_offset_sections ever starts dealing with the
text offset, and we still need to do this, we need to
invent a SECT_OFF_ADDR_KLUDGE or something. */
valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
goto define_a_symbol;
}
/* Since it's not the kludge case, re-dispatch to the right handler. */
switch (type) {
case N_STSYM: goto case_N_STSYM;
case N_LCSYM: goto case_N_LCSYM;
case N_ROSYM: goto case_N_ROSYM;
default: abort();
}
}
case_N_STSYM: /* Static symbol in data seg */
case N_DSLINE: /* Source line number, data seg */
valu += ANOFFSET (section_offsets, SECT_OFF_DATA);
goto define_a_symbol;
case_N_LCSYM: /* Static symbol in BSS seg */
case N_BSLINE: /* Source line number, bss seg */
/* N_BROWS: overlaps with N_BSLINE */
valu += ANOFFSET (section_offsets, SECT_OFF_BSS);
goto define_a_symbol;
case_N_ROSYM: /* Static symbol in Read-only data seg */
valu += ANOFFSET (section_offsets, SECT_OFF_RODATA);
goto define_a_symbol;
case N_ENTRY: /* Alternate entry point */
/* Relocate for dynamic loading */
valu += ANOFFSET (section_offsets, SECT_OFF_TEXT);
goto define_a_symbol;
/* The following symbol types we don't know how to process. Handle
them in a "default" way, but complain to people who care. */
default:
case N_CATCH: /* Exception handler catcher */
case N_EHDECL: /* Exception handler name */
case N_PC: /* Global symbol in Pascal */
case N_M2C: /* Modula-2 compilation unit */
/* N_MOD2: overlaps with N_EHDECL */
case N_SCOPE: /* Modula-2 scope information */
case N_ECOML: /* End common (local name) */
case N_NBTEXT: /* Gould Non-Base-Register symbols??? */
case N_NBDATA:
case N_NBBSS:
case N_NBSTS:
case N_NBLCS:
complain (&unknown_symtype_complaint,
local_hex_string((unsigned long) type));
/* FALLTHROUGH */
/* The following symbol types don't need the address field relocated,
since it is either unused, or is absolute. */
define_a_symbol:
case N_GSYM: /* Global variable */
case N_NSYMS: /* Number of symbols (ultrix) */
case N_NOMAP: /* No map? (ultrix) */
case N_RSYM: /* Register variable */
case N_DEFD: /* Modula-2 GNU module dependency */
case N_SSYM: /* Struct or union element */
case N_LSYM: /* Local symbol in stack */
case N_PSYM: /* Parameter variable */
case N_LENG: /* Length of preceding symbol type */
if (name)
{
int deftype;
char *colon_pos = strchr (name, ':');
if (colon_pos == NULL)
deftype = '\0';
else
deftype = colon_pos[1];
switch (deftype)
{
case 'f':
case 'F':
function_stab_type = type;
#ifdef SUN_FIXED_LBRAC_BUG
/* The Sun acc compiler, under SunOS4, puts out
functions with N_GSYM or N_STSYM. The problem is
that the address of the symbol is no good (for N_GSYM
it doesn't even attept an address; for N_STSYM it
puts out an address but then it gets relocated
relative to the data segment, not the text segment).
Currently we can't fix this up later as we do for
some types of symbol in scan_file_globals.
Fortunately we do have a way of finding the address -
we know that the value in last_pc_address is either
the one we want (if we're dealing with the first
function in an object file), or somewhere in the
previous function. This means that we can use the
minimal symbol table to get the address. */
/* On solaris up to 2.2, the N_FUN stab gets relocated.
On Solaris 2.3, ld no longer relocates stabs (which
is good), and the N_FUN's value is now always zero.
The following code can't deal with this, because
last_pc_address depends on getting the address from a
N_SLINE or some such and in Solaris those are function
relative. Best fix is probably to create a Ttext.text symbol
and handle this like Ddata.data and so on. */
if (type == N_GSYM || type == N_STSYM)
{
struct minimal_symbol *m;
int l = colon_pos - name;
m = lookup_minimal_symbol_by_pc (last_pc_address);
if (m && STREQN (SYMBOL_NAME (m), name, l))
/* last_pc_address was in this function */
valu = SYMBOL_VALUE (m);
else if (m && STREQN (SYMBOL_NAME (m+1), name, l))
/* last_pc_address was in last function */
valu = SYMBOL_VALUE (m+1);
else
/* Not found - use last_pc_address (for finish_block) */
valu = last_pc_address;
}
last_pc_address = valu; /* Save for SunOS bug circumcision */
#endif
if (block_address_function_relative)
/* For Solaris 2.0 compilers, the block addresses and
N_SLINE's are relative to the start of the
function. On normal systems, and when using gcc on
Solaris 2.0, these addresses are just absolute, or
relative to the N_SO, depending on
BLOCK_ADDRESS_ABSOLUTE. */
function_start_offset = valu;
within_function = 1;
if (context_stack_depth > 0)
{
new = pop_context ();
/* Make a block for the local symbols within. */
finish_block (new->name, &local_symbols, new->old_blocks,
new->start_addr, valu, objfile);
}
/* Stack must be empty now. */
if (context_stack_depth != 0)
complain (&lbrac_unmatched_complaint, symnum);
new = push_context (0, valu);
new->name = define_symbol (valu, name, desc, type, objfile);
break;
default:
define_symbol (valu, name, desc, type, objfile);
break;
}
}
break;
/* We use N_OPT to carry the gcc2_compiled flag. Sun uses it
for a bunch of other flags, too. Someday we may parse their
flags; for now we ignore theirs and hope they'll ignore ours. */
case N_OPT: /* Solaris 2: Compiler options */
if (name)
{
if (STREQ (name, GCC2_COMPILED_FLAG_SYMBOL))
{
processing_gcc_compilation = 2;
#if 1 /* Works, but is experimental. -fnf */
if (AUTO_DEMANGLING)
{
set_demangling_style (GNU_DEMANGLING_STYLE_STRING);
}
#endif
}
else
n_opt_found = 1;
}
break;
/* The following symbol types can be ignored. */
case N_OBJ: /* Solaris 2: Object file dir and name */
/* N_UNDF: Solaris 2: file separator mark */
/* N_UNDF: -- we will never encounter it, since we only process one
file's symbols at once. */
case N_ENDM: /* Solaris 2: End of module */
case N_MAIN: /* Name of main routine. */
break;
}
previous_stab_code = type;
}
/* FIXME: The only difference between this and elfstab_build_psymtabs is
the call to install_minimal_symbols for elf. If the differences are
really that small, the code should be shared. */
/* Scan and build partial symbols for an coff symbol file.
The coff file has already been processed to get its minimal symbols.
This routine is the equivalent of dbx_symfile_init and dbx_symfile_read
rolled into one.
OBJFILE is the object file we are reading symbols from.
ADDR is the address relative to which the symbols are (e.g.
the base address of the text segment).
MAINLINE is true if we are reading the main symbol
table (as opposed to a shared lib or dynamically loaded file).
STABOFFSET and STABSIZE define the location in OBJFILE where the .stab
section exists.
STABSTROFFSET and STABSTRSIZE define the location in OBJFILE where the
.stabstr section exists.
This routine is mostly copied from dbx_symfile_init and dbx_symfile_read,
adjusted for coff details. */
void
coffstab_build_psymtabs (objfile, section_offsets, mainline,
staboffset, stabsize,
stabstroffset, stabstrsize)
struct objfile *objfile;
struct section_offsets *section_offsets;
int mainline;
file_ptr staboffset;
unsigned int stabsize;
file_ptr stabstroffset;
unsigned int stabstrsize;
{
int val;
bfd *sym_bfd = objfile->obfd;
char *name = bfd_get_filename (sym_bfd);
struct dbx_symfile_info *info;
/* There is already a dbx_symfile_info allocated by our caller.
It might even contain some info from the coff symtab to help us. */
info = (struct dbx_symfile_info *) objfile->sym_stab_info;
DBX_TEXT_SECT (objfile) = bfd_get_section_by_name (sym_bfd, ".text");
if (!DBX_TEXT_SECT (objfile))
error ("Can't find .text section in symbol file");
#define COFF_STABS_SYMBOL_SIZE 12 /* XXX FIXME XXX */
DBX_SYMBOL_SIZE (objfile) = COFF_STABS_SYMBOL_SIZE;
DBX_SYMCOUNT (objfile) = stabsize / DBX_SYMBOL_SIZE (objfile);
DBX_STRINGTAB_SIZE (objfile) = stabstrsize;
DBX_SYMTAB_OFFSET (objfile) = staboffset;
if (stabstrsize > bfd_get_size (sym_bfd))
error ("ridiculous string table size: %d bytes", stabstrsize);
DBX_STRINGTAB (objfile) = (char *)
obstack_alloc (&objfile->psymbol_obstack, stabstrsize+1);
/* Now read in the string table in one big gulp. */
val = bfd_seek (sym_bfd, stabstroffset, SEEK_SET);
if (val < 0)
perror_with_name (name);
val = bfd_read (DBX_STRINGTAB (objfile), stabstrsize, 1, sym_bfd);
if (val != stabstrsize)
perror_with_name (name);
stabsread_new_init ();
buildsym_new_init ();
free_header_files ();
init_header_files ();
processing_acc_compilation = 1;
/* In a coff file, we've already installed the minimal symbols that came
from the coff (non-stab) symbol table, so always act like an
incremental load here. */
dbx_symfile_read (objfile, section_offsets, 0);
}
/* Scan and build partial symbols for an ELF symbol file.
This ELF file has already been processed to get its minimal symbols,
and any DWARF symbols that were in it.
This routine is the equivalent of dbx_symfile_init and dbx_symfile_read
rolled into one.
OBJFILE is the object file we are reading symbols from.
ADDR is the address relative to which the symbols are (e.g.
the base address of the text segment).
MAINLINE is true if we are reading the main symbol
table (as opposed to a shared lib or dynamically loaded file).
STABOFFSET and STABSIZE define the location in OBJFILE where the .stab
section exists.
STABSTROFFSET and STABSTRSIZE define the location in OBJFILE where the
.stabstr section exists.
This routine is mostly copied from dbx_symfile_init and dbx_symfile_read,
adjusted for elf details. */
void
elfstab_build_psymtabs (objfile, section_offsets, mainline,
staboffset, stabsize,
stabstroffset, stabstrsize)
struct objfile *objfile;
struct section_offsets *section_offsets;
int mainline;
file_ptr staboffset;
unsigned int stabsize;
file_ptr stabstroffset;
unsigned int stabstrsize;
{
int val;
bfd *sym_bfd = objfile->obfd;
char *name = bfd_get_filename (sym_bfd);
struct dbx_symfile_info *info;
/* There is already a dbx_symfile_info allocated by our caller.
It might even contain some info from the ELF symtab to help us. */
info = (struct dbx_symfile_info *) objfile->sym_stab_info;
DBX_TEXT_SECT (objfile) = bfd_get_section_by_name (sym_bfd, ".text");
if (!DBX_TEXT_SECT (objfile))
error ("Can't find .text section in symbol file");
#define ELF_STABS_SYMBOL_SIZE 12 /* XXX FIXME XXX */
DBX_SYMBOL_SIZE (objfile) = ELF_STABS_SYMBOL_SIZE;
DBX_SYMCOUNT (objfile) = stabsize / DBX_SYMBOL_SIZE (objfile);
DBX_STRINGTAB_SIZE (objfile) = stabstrsize;
DBX_SYMTAB_OFFSET (objfile) = staboffset;
if (stabstrsize > bfd_get_size (sym_bfd))
error ("ridiculous string table size: %d bytes", stabstrsize);
DBX_STRINGTAB (objfile) = (char *)
obstack_alloc (&objfile->psymbol_obstack, stabstrsize+1);
/* Now read in the string table in one big gulp. */
val = bfd_seek (sym_bfd, stabstroffset, SEEK_SET);
if (val < 0)
perror_with_name (name);
val = bfd_read (DBX_STRINGTAB (objfile), stabstrsize, 1, sym_bfd);
if (val != stabstrsize)
perror_with_name (name);
stabsread_new_init ();
buildsym_new_init ();
free_header_files ();
init_header_files ();
install_minimal_symbols (objfile);
processing_acc_compilation = 1;
/* In an elf file, we've already installed the minimal symbols that came
from the elf (non-stab) symbol table, so always act like an
incremental load here. */
dbx_symfile_read (objfile, section_offsets, 0);
}
/* Scan and build partial symbols for a PA symbol file.
This PA file has already been processed to get its minimal symbols.
OBJFILE is the object file we are reading symbols from.
ADDR is the address relative to which the symbols are (e.g.
the base address of the text segment).
MAINLINE is true if we are reading the main symbol
table (as opposed to a shared lib or dynamically loaded file).
*/
void
pastab_build_psymtabs (objfile, section_offsets, mainline)
struct objfile *objfile;
struct section_offsets *section_offsets;
int mainline;
{
free_header_files ();
init_header_files ();
/* In a PA file, we've already installed the minimal symbols that came
from the PA (non-stab) symbol table, so always act like an
incremental load here. */
dbx_symfile_read (objfile, section_offsets, mainline);
}
/* Parse the user's idea of an offset for dynamic linking, into our idea
of how to represent it for fast symbol reading. */
static struct section_offsets *
dbx_symfile_offsets (objfile, addr)
struct objfile *objfile;
CORE_ADDR addr;
{
struct section_offsets *section_offsets;
int i;
objfile->num_sections = SECT_OFF_MAX;
section_offsets = (struct section_offsets *)
obstack_alloc (&objfile -> psymbol_obstack,
sizeof (struct section_offsets)
+ sizeof (section_offsets->offsets) * (SECT_OFF_MAX-1));
for (i = 0; i < SECT_OFF_MAX; i++)
ANOFFSET (section_offsets, i) = addr;
return section_offsets;
}
static struct sym_fns aout_sym_fns =
{
bfd_target_aout_flavour,
dbx_new_init, /* sym_new_init: init anything gbl to entire symtab */
dbx_symfile_init, /* sym_init: read initial info, setup for sym_read() */
dbx_symfile_read, /* sym_read: read a symbol file into symtab */
dbx_symfile_finish, /* sym_finish: finished with file, cleanup */
dbx_symfile_offsets, /* sym_offsets: parse user's offsets to internal form */
NULL /* next: pointer to next struct sym_fns */
};
void
_initialize_dbxread ()
{
add_symtab_fns(&aout_sym_fns);
}