mirror/binutils-gdb
2
0
Fork 0
mirror of https://sourceware.org/git/binutils-gdb.git synced 2024-12-09 04:21:49 +08:00
Code Issues Packages Projects Releases Wiki Activity
40b92220c5
binutils-gdb/gdb/i386-nlmstub.c
Ian Lance Taylor d6a9983874 Snapshot of current i386 NLM debugging stub.
1993-09-10 23:25:40 +00:00

1060 lines
28 KiB
C
Raw Blame History

/* i386-nlmstub.c -- NLM debugging stub for the i386.
This is originally based on an m68k software stub written by Glenn
Engel at HP, but has changed quite a bit. It was modified for the
i386 by Jim Kingdon, Cygnus Support. It was modified to run under
NetWare by Ian Lance Taylor, Cygnus Support.
This code is intended to produce an NLM (a NetWare Loadable Module)
to run under NetWare on an i386 platform. To create the NLM,
compile this code into an object file using the NLM SDK on any i386
host, and use the nlmconv program (available in the GNU binutils)
to transform the resulting object file into an NLM. */
/****************************************************************************
THIS SOFTWARE IS NOT COPYRIGHTED
HP offers the following for use in the public domain. HP makes no
warranty with regard to the software or it's performance and the
user accepts the software "AS IS" with all faults.
HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD
TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
****************************************************************************/
/****************************************************************************
*
* The following gdb commands are supported:
*
* command function Return value
*
* g return the value of the CPU registers hex data or ENN
* G set the value of the CPU registers OK or ENN
*
* mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN
* MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN
*
* c Resume at current address SNN ( signal NN)
* cAA..AA Continue at address AA..AA SNN
*
* s Step one instruction SNN
* sAA..AA Step one instruction from AA..AA SNN
*
* k kill
*
* ? What was the last sigval ? SNN (signal NN)
*
* All commands and responses are sent with a packet which includes a
* checksum. A packet consists of
*
* $<packet info>#<checksum>.
*
* where
* <packet info> :: <characters representing the command or response>
* <checksum> :: < two hex digits computed as modulo 256 sum of <packetinfo>>
*
* When a packet is received, it is first acknowledged with either '+' or '-'.
* '+' indicates a successful transfer. '-' indicates a failed transfer.
*
* Example:
*
* Host: Reply:
* $m0,10#2a +$00010203040506070809101112131415#42
*
****************************************************************************/
#include <dfs.h>
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <ctype.h>
#include <time.h>
#include <aio.h>
#include <conio.h>
#include <advanced.h>
#include <debugapi.h>
#include <process.h>
/************************************************************************/
/*****************************************************************************
*
* (C) Copyright 1988-1993 Novell, Inc.
* All Rights Reserved.
*
* This program is an unpublished copyrighted work which is proprietary
* to Novell, Inc. and contains confidential information that is not
* to be reproduced or disclosed to any other person or entity without
* prior written consent from Novell, Inc. in each and every instance.
*
* WARNING: Unauthorized reproduction of this program as well as
* unauthorized preparation of derivative works based upon the
* program or distribution of copies by sale, rental, lease or
* lending are violations of federal copyright laws and state trade
* secret laws, punishable by civil and criminal penalties.
*
* $release$
* $modname: loadstuff.h$
* $version: 1.37$
* $date: Fri, Jan 15, 1993$
*
****************************************************************************/
/* WARNING: THIS IS NOT A COMPLETE OS HEADER FILE - DON'T GET CONFUSED
***********************************************************************
* The information is this file is a subset of the OS LOADER.H.
* This file was created to reveal the LoadDefinitionStrucutre and some
* associated information to Cygnus Support to assist them in their
* efforts to develop GNU netware utilities. Don't confuse this file
* with LOADER.H or any other actually supported NetWare header.
************************************************************************/
struct LoadDefinitionStructure
{
struct LoadDefinitionStructure *LDLink;
struct LoadDefinitionStructure *LDKillLink;
struct LoadDefinitionStructure *LDScanLink;
struct ResourceTagStructure *LDResourceList;
LONG LDIdentificationNumber;
LONG LDCodeImageOffset;
LONG LDCodeImageLength;
LONG LDDataImageOffset;
LONG LDDataImageLength;
LONG LDUninitializedDataLength;
LONG LDCustomDataOffset;
LONG LDCustomDataSize;
LONG LDFlags;
LONG LDType;
LONG (*LDInitializationProcedure)(
struct LoadDefinitionStructure *LoadRecord,
struct ScreenStruct *screenID,
BYTE *CommandLine,
BYTE *loadDirectoryPath,
LONG uninitializedDataLength,
LONG fileHandle,
LONG (*ReadRoutine)(
LONG fileHandle,
LONG offset,
void *buffer,
LONG numberOfBytes),
LONG customDataOffset,
LONG customDataSize);
void (*LDExitProcedure)(void);
LONG (*LDCheckUnloadProcedure)(
struct ScreenStruct *screenID);
struct ExternalPublicDefinitionStructure *LDPublics;
BYTE LDFileName[36];
BYTE LDName[128];
LONG *LDCLIBLoadStructure;
LONG *LDNLMDebugger;
LONG LDParentID;
LONG LDReservedForCLIB;
LONG Reserved0;
LONG Reserved1;
void *LDModuleObjectHandle; /* If Instrumented BEW 10/16/90 */
LONG LDMajorVersion;
LONG LDMinorVersion;
LONG LDRevision;
LONG LDYear;
LONG LDMonth;
LONG LDDay;
BYTE *LDCopyright;
LONG LDAllocAvailBytes;
LONG LDAllocFreeCount;
LONG LDLastGarbCollect;
LONG LDAlloc16Lists[64];
LONG LDAlloc256Lists[12];
LONG LDAlloc4kList;
struct DomainStructure *LDDomainID; /* This must be non-zero for the Alloc Hunt code to work right. */
/* It also points to the domain structure. */
struct LoadDefinitionStructure *LDEnvLink;
void *LDAllocPagesListHead;
struct ExternalPublicDefinitionStructure *LDTempPublicList;
LONG LDMessageLanguage; /* for enabling */
BYTE **LDMessages; /* for enabling */
LONG LDMessageCount; /* for enabling */
BYTE *LDHelpFile; /* for enabling */
LONG LDMessageBufferSize; /* for enabling */
LONG LDHelpBufferSize; /* for enabling */
LONG LDSharedCodeOffset; /* for protection */
LONG LDSharedCodeLength; /* for protection */
LONG LDSharedDataOffset; /* for protection */
LONG LDSharedDataLength; /* for protection */
LONG (*LDSharedInitProcedure)(
struct LoadDefinitionStructure *LoadRecord,
struct ScreenStruct *screenID,
BYTE *CommandLine);
void (*LDSharedExitProcedure)(void);
LONG LDRPCDataTable;
LONG LDRealRPCDataTable;
LONG LDRPCDataTableSize;
LONG LDNumberOfReferencedPublics;
struct ExternalPublicDefinitionStructure **LDReferencedPublics;
LONG LDNumberOfReferencedExports;
};
/* define the LDFlags. */
#define LDModuleIsReEntrantBit 0x00000001
#define LDModuleCanBeMultiplyLoadedBit 0x00000002
#define LDSynchronizeStart 0x00000004
#define LDPseudoPreemptionBit 0x00000008
#define LDLoadInOSDomain 0x00000010
#define LDDontUnloadBit 0x20000000
#define LDModuleIsBeingDebugged 0x40000000
#define LDMemoryOn4KBoundriesBit 0x80000000
/* LoadModule load options */
#define LO_NORMAL 0x0000
#define LO_STARTUP 0x0001
#define LO_PROTECT 0x0002
#define LO_DEBUG 0x0004
#define LO_AUTO_LOAD 0x0008
#define LO_DONT_PROMPT 0x0010
#define LO_LOAD_LOW 0x0020
#define LO_RETURN_HANDLE 0x0040
#define LO_LOAD_SILENT 0x0080
/* Loader returned error codes */
#define LOAD_COULD_NOT_FIND_FILE 1
#define LOAD_ERROR_READING_FILE 2
#define LOAD_NOT_NLM_FILE_FORMAT 3
#define LOAD_WRONG_NLM_FILE_VERSION 4
#define LOAD_REENTRANT_INITIALIZE_FAILURE 5
#define LOAD_CAN_NOT_LOAD_MULTIPLE_COPIES 6
#define LOAD_ALREADY_IN_PROGRESS 7
#define LOAD_NOT_ENOUGH_MEMORY 8
#define LOAD_INITIALIZE_FAILURE 9
#define LOAD_INCONSISTENT_FILE_FORMAT 10
#define LOAD_CAN_NOT_LOAD_AT_STARTUP 11
#define LOAD_AUTO_LOAD_MODULES_NOT_LOADED 12
#define LOAD_UNRESOLVED_EXTERNAL 13
#define LOAD_PUBLIC_ALREADY_DEFINED 14
#define LOAD_XDC_DATA_ERROR 15
#define LOAD_NOT_OS_DOMAIN 16
/****************************************************************************/
/* The main thread ID. */
static int mainthread;
/* The LoadDefinitionStructure of the NLM being debugged. */
static struct LoadDefinitionStructure *handle;
/* Whether we have connected to gdb. */
static int talking;
/* The actual first instruction in the program. */
static unsigned char first_insn;
/* An error message for the main thread to print. */
static char *error_message;
/* The AIO port handle. */
static int AIOhandle;
/* The console screen. */
static int console_screen;
/* BUFMAX defines the maximum number of characters in inbound/outbound
buffers. At least NUMREGBYTES*2 are needed for register packets */
#define BUFMAX 400
/* remote_debug > 0 prints ill-formed commands in valid packets and
checksum errors. */
static int remote_debug = 1;
static const char hexchars[] = "0123456789abcdef";
/* Number of bytes of registers. */
#define NUMREGBYTES 64
enum regnames {EAX, ECX, EDX, EBX, ESP, EBP, ESI, EDI,
PC /* also known as eip */,
PS /* also known as eflags */,
CS, SS, DS, ES, FS, GS};
/* Register values. */
static int registers[NUMREGBYTES/4];
/* Read a character from the serial port. This must busy wait, but
that's OK because we will be the only thread running anyhow. */
static int
getDebugChar ()
{
int err;
LONG got;
unsigned char ret;
do
{
err = AIOReadData (AIOhandle, (char *) &ret, 1, &got);
if (err != 0)
{
error_message = "AIOReadData failed";
ResumeThread (mainthread);
return -1;
}
}
while (got == 0);
return ret;
}
/* Write a character to the serial port. Returns 0 on failure,
non-zero on success. */
static int
putDebugChar (c)
unsigned char c;
{
int err;
LONG put;
err = AIOWriteData (AIOhandle, (char *) &c, 1, &put);
if (err != 0 || put != 1)
{
error_message = "AIOWriteData failed";
ResumeThread (mainthread);
return 0;
}
return 1;
}
/* Get the registers out of the frame information. */
static void
frame_to_registers (frame, regs)
T_TSS_StackFrame *frame;
int *regs;
{
regs[EAX] = frame->ExceptionEAX;
regs[ECX] = frame->ExceptionECX;
regs[EDX] = frame->ExceptionEDX;
regs[EBX] = frame->ExceptionEBX;
regs[ESP] = frame->ExceptionESP;
regs[EBP] = frame->ExceptionEBP;
regs[ESI] = frame->ExceptionESI;
regs[EDI] = frame->ExceptionEDI;
regs[PC] = frame->ExceptionEIP;
regs[PS] = frame->ExceptionSystemFlags;
regs[CS] = frame->ExceptionCS[0];
regs[SS] = frame->ExceptionSS[0];
regs[DS] = frame->ExceptionDS[0];
regs[ES] = frame->ExceptionES[0];
regs[FS] = frame->ExceptionFS[0];
regs[GS] = frame->ExceptionGS[0];
}
/* Put the registers back into the frame information. */
static void
registers_to_frame (regs, frame)
int *regs;
T_TSS_StackFrame *frame;
{
frame->ExceptionEAX = regs[EAX];
frame->ExceptionECX = regs[ECX];
frame->ExceptionEDX = regs[EDX];
frame->ExceptionEBX = regs[EBX];
frame->ExceptionESP = regs[ESP];
frame->ExceptionEBP = regs[EBP];
frame->ExceptionESI = regs[ESI];
frame->ExceptionEDI = regs[EDI];
frame->ExceptionEIP = regs[PC];
frame->ExceptionSystemFlags = regs[PS];
frame->ExceptionCS[0] = regs[CS];
frame->ExceptionSS[0] = regs[SS];
frame->ExceptionDS[0] = regs[DS];
frame->ExceptionES[0] = regs[ES];
frame->ExceptionFS[0] = regs[FS];
frame->ExceptionGS[0] = regs[GS];
}
/* Turn a hex character into a number. */
static int
hex (ch)
char ch;
{
if ((ch >= 'a') && (ch <= 'f'))
return (ch-'a'+10);
if ((ch >= '0') && (ch <= '9'))
return (ch-'0');
if ((ch >= 'A') && (ch <= 'F'))
return (ch-'A'+10);
return (-1);
}
/* Scan for the sequence $<data>#<checksum>. Returns 0 on failure,
non-zero on success. */
static int
getpacket (buffer)
char * buffer;
{
unsigned char checksum;
unsigned char xmitcsum;
int i;
int count;
int ch;
do
{
/* wait around for the start character, ignore all other characters */
while ((ch = getDebugChar()) != '$')
if (ch == -1)
return 0;
checksum = 0;
xmitcsum = -1;
count = 0;
/* now, read until a # or end of buffer is found */
while (count < BUFMAX)
{
ch = getDebugChar();
if (ch == -1)
return 0;
if (ch == '#')
break;
checksum = checksum + ch;
buffer[count] = ch;
count = count + 1;
}
buffer[count] = 0;
if (ch == '#')
{
ch = getDebugChar ();
if (ch == -1)
return 0;
xmitcsum = hex(ch) << 4;
ch = getDebugChar ();
if (ch == -1)
return 0;
xmitcsum += hex(ch);
if ((remote_debug ) && (checksum != xmitcsum))
{
fprintf(stderr,"bad checksum. My count = 0x%x, sent=0x%x. buf=%s\n",
checksum,xmitcsum,buffer);
}
if (checksum != xmitcsum)
{
/* failed checksum */
if (! putDebugChar('-'))
return 0;
}
else
{
/* successful transfer */
if (! putDebugChar('+'))
return 0;
/* if a sequence char is present, reply the sequence ID */
if (buffer[2] == ':')
{
if (! putDebugChar (buffer[0])
|| ! putDebugChar (buffer[1]))
return 0;
/* remove sequence chars from buffer */
count = strlen(buffer);
for (i=3; i <= count; i++)
buffer[i-3] = buffer[i];
}
}
}
}
while (checksum != xmitcsum);
return 1;
}
/* Send the packet in buffer. Returns 0 on failure, non-zero on
success. */
static int
putpacket (buffer)
char * buffer;
{
unsigned char checksum;
int count;
int ch;
/* $<packet info>#<checksum>. */
do
{
if (! putDebugChar('$'))
return 0;
checksum = 0;
count = 0;
while (ch=buffer[count])
{
if (! putDebugChar(ch))
return 0;
checksum += ch;
count += 1;
}
if (! putDebugChar('#')
|| ! putDebugChar(hexchars[checksum >> 4])
|| ! putDebugChar(hexchars[checksum % 16]))
return 0;
ch = getDebugChar ();
if (ch == -1)
return 0;
}
while (ch != '+');
return 1;
}
static char remcomInBuffer[BUFMAX];
static char remcomOutBuffer[BUFMAX];
static short error;
static void
debug_error (format, parm)
char *format;
char *parm;
{
if (remote_debug)
fprintf (stderr, format, parm);
}
/* Address of a routine to RTE to if we get a memory fault. */
static volatile void (*mem_fault_routine)() = NULL;
/* Indicate to caller of mem2hex or hex2mem that there has been an
error. */
static volatile int mem_err = 0;
static void
set_mem_err ()
{
mem_err = 1;
}
/* These are separate functions so that they are so short and sweet
that the compiler won't save any registers (if there is a fault
to mem_fault, they won't get restored, so there better not be any
saved). */
static int
get_char (addr)
char *addr;
{
return *addr;
}
static void
set_char (addr, val)
char *addr;
int val;
{
*addr = val;
}
/* convert the memory pointed to by mem into hex, placing result in buf */
/* return a pointer to the last char put in buf (null) */
/* If MAY_FAULT is non-zero, then we should set mem_err in response to
a fault; if zero treat a fault like any other fault in the stub. */
static char *
mem2hex (mem, buf, count, may_fault)
char *mem;
char *buf;
int count;
int may_fault;
{
int i;
unsigned char ch;
if (may_fault)
mem_fault_routine = set_mem_err;
for (i = 0; i < count; i++)
{
ch = get_char (mem++);
if (may_fault && mem_err)
return (buf);
*buf++ = hexchars[ch >> 4];
*buf++ = hexchars[ch % 16];
}
*buf = 0;
if (may_fault)
mem_fault_routine = NULL;
return(buf);
}
/* convert the hex array pointed to by buf into binary to be placed in mem */
/* return a pointer to the character AFTER the last byte written */
static char *
hex2mem (buf, mem, count, may_fault)
char *buf;
char *mem;
int count;
int may_fault;
{
int i;
unsigned char ch;
if (may_fault)
mem_fault_routine = set_mem_err;
for (i=0;i<count;i++)
{
ch = hex(*buf++) << 4;
ch = ch + hex(*buf++);
set_char (mem++, ch);
if (may_fault && mem_err)
return (mem);
}
if (may_fault)
mem_fault_routine = NULL;
return(mem);
}
/* This function takes the 386 exception vector and attempts to
translate this number into a unix compatible signal value. */
static int
computeSignal (exceptionVector)
int exceptionVector;
{
int sigval;
switch (exceptionVector)
{
case 0 : sigval = 8; break; /* divide by zero */
case 1 : sigval = 5; break; /* debug exception */
case 3 : sigval = 5; break; /* breakpoint */
case 4 : sigval = 16; break; /* into instruction (overflow) */
case 5 : sigval = 16; break; /* bound instruction */
case 6 : sigval = 4; break; /* Invalid opcode */
case 7 : sigval = 8; break; /* coprocessor not available */
case 8 : sigval = 7; break; /* double fault */
case 9 : sigval = 11; break; /* coprocessor segment overrun */
case 10 : sigval = 11; break; /* Invalid TSS */
case 11 : sigval = 11; break; /* Segment not present */
case 12 : sigval = 11; break; /* stack exception */
case 13 : sigval = 11; break; /* general protection */
case 14 : sigval = 11; break; /* page fault */
case 16 : sigval = 7; break; /* coprocessor error */
default:
sigval = 7; /* "software generated"*/
}
return (sigval);
}
/**********************************************/
/* WHILE WE FIND NICE HEX CHARS, BUILD AN INT */
/* RETURN NUMBER OF CHARS PROCESSED */
/**********************************************/
static int
hexToInt(ptr, intValue)
char **ptr;
int *intValue;
{
int numChars = 0;
int hexValue;
*intValue = 0;
while (**ptr)
{
hexValue = hex(**ptr);
if (hexValue >=0)
{
*intValue = (*intValue <<4) | hexValue;
numChars ++;
}
else
break;
(*ptr)++;
}
return (numChars);
}
/* This function does all command processing for interfacing to gdb.
It is called whenever an exception occurs in the module being
debugged. */
static LONG
handle_exception (T_StackFrame *old_frame)
{
T_TSS_StackFrame *frame = (T_TSS_StackFrame *) old_frame;
int first = 0;
int sigval;
int addr, length;
char * ptr;
int newPC;
/* Apparently the bell can sometimes be ringing at this point, and
should be stopped. */
StopBell ();
if (remote_debug)
{
ConsolePrintf ("vector=%d: %s, sr=0x%x, pc=0x%x, thread=%d\r\n",
frame->ExceptionNumber,
frame->ExceptionDescription,
frame->ExceptionSystemFlags,
frame->ExceptionEIP,
GetThreadID ());
}
/* If the NLM just started, we record the module load information
and the thread ID, and set a breakpoint at the first instruction
in the program. */
if (frame->ExceptionNumber == START_NLM_EVENT
&& handle == NULL)
{
handle = (struct LoadDefinitionStructure *) frame->ExceptionErrorCode;
first_insn = *(char *) handle->LDInitializationProcedure;
*(unsigned char *) handle->LDInitializationProcedure = 0xcc;
return RETURN_TO_PROGRAM;
}
/* Pass some events on to the next debugger, in case it will handle
them. */
if (frame->ExceptionNumber == ENTER_DEBUGGER_EVENT
|| frame->ExceptionNumber == KEYBOARD_BREAK_EVENT)
return RETURN_TO_NEXT_DEBUGGER;
/* At the moment, we don't care about most of the unusual NetWare
exceptions. */
if (frame->ExceptionNumber != TERMINATE_NLM_EVENT
&& frame->ExceptionNumber > 31)
return RETURN_TO_PROGRAM;
/* Reset the initial breakpoint if necessary. */
if (frame->ExceptionNumber == 3
&& frame->ExceptionEIP == (LONG) handle->LDInitializationProcedure + 1
&& *(unsigned char *) handle->LDInitializationProcedure == 0xcc)
{
*(char *) handle->LDInitializationProcedure = first_insn;
frame->ExceptionEIP = (LONG) handle->LDInitializationProcedure;
first = 1;
}
/* FIXME: How do we know that this exception has anything to do with
the program we are debugging? We can check whether the PC is in
the range of the module we are debugging, but that doesn't help
much since an error could occur in a library routine. */
frame_to_registers (frame, registers);
/* reply to host that an exception has occurred */
if (frame->ExceptionNumber == TERMINATE_NLM_EVENT)
{
/* There is no way to get the exit status. */
remcomOutBuffer[0] = 'W';
remcomOutBuffer[1] = hexchars[0];
remcomOutBuffer[2] = hexchars[0];
remcomOutBuffer[3] = 0;
}
else
{
sigval = computeSignal (frame->ExceptionNumber);
remcomOutBuffer[0] = 'S';
remcomOutBuffer[1] = hexchars[sigval >> 4];
remcomOutBuffer[2] = hexchars[sigval % 16];
remcomOutBuffer[3] = 0;
if (first)
{
remcomOutBuffer[0] = 'N';
sprintf (remcomOutBuffer + 3, "0x%x;0x%x;0x%x",
handle->LDCodeImageOffset,
handle->LDDataImageOffset,
handle->LDDataImageOffset + handle->LDDataImageLength);
}
}
if (! putpacket(remcomOutBuffer))
return RETURN_TO_NEXT_DEBUGGER;
if (frame->ExceptionNumber == TERMINATE_NLM_EVENT)
{
ResumeThread (mainthread);
return RETURN_TO_PROGRAM;
}
while (1)
{
error = 0;
remcomOutBuffer[0] = 0;
if (! getpacket (remcomInBuffer))
return RETURN_TO_NEXT_DEBUGGER;
talking = 1;
switch (remcomInBuffer[0])
{
case '?':
sigval = computeSignal (frame->ExceptionNumber);
remcomOutBuffer[0] = 'S';
remcomOutBuffer[1] = hexchars[sigval >> 4];
remcomOutBuffer[2] = hexchars[sigval % 16];
remcomOutBuffer[3] = 0;
if (first)
{
remcomOutBuffer[0] = 'N';
sprintf (remcomOutBuffer + 3, "0x%x;0x%x;0x%x",
handle->LDCodeImageOffset,
handle->LDDataImageOffset,
(handle->LDDataImageOffset
+ handle->LDDataImageLength));
}
break;
case 'd':
remote_debug = !(remote_debug); /* toggle debug flag */
break;
case 'g':
/* return the value of the CPU registers */
mem2hex((char*) registers, remcomOutBuffer, NUMREGBYTES, 0);
break;
case 'G':
/* set the value of the CPU registers - return OK */
hex2mem(&remcomInBuffer[1], (char*) registers, NUMREGBYTES, 0);
strcpy(remcomOutBuffer,"OK");
break;
case 'm':
/* mAA..AA,LLLL Read LLLL bytes at address AA..AA */
/* TRY TO READ %x,%x. IF SUCCEED, SET PTR = 0 */
ptr = &remcomInBuffer[1];
if (hexToInt(&ptr,&addr))
if (*(ptr++) == ',')
if (hexToInt(&ptr,&length))
{
ptr = 0;
mem_err = 0;
mem2hex((char*) addr, remcomOutBuffer, length, 1);
if (mem_err)
{
strcpy (remcomOutBuffer, "E03");
debug_error ("memory fault");
}
}
if (ptr)
{
strcpy(remcomOutBuffer,"E01");
debug_error("malformed read memory command: %s",remcomInBuffer);
}
break;
case 'M':
/* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
/* TRY TO READ '%x,%x:'. IF SUCCEED, SET PTR = 0 */
ptr = &remcomInBuffer[1];
if (hexToInt(&ptr,&addr))
if (*(ptr++) == ',')
if (hexToInt(&ptr,&length))
if (*(ptr++) == ':')
{
mem_err = 0;
hex2mem(ptr, (char*) addr, length, 1);
if (mem_err)
{
strcpy (remcomOutBuffer, "E03");
debug_error ("memory fault");
}
else
{
strcpy(remcomOutBuffer,"OK");
}
ptr = 0;
}
if (ptr)
{
strcpy(remcomOutBuffer,"E02");
debug_error("malformed write memory command: %s",remcomInBuffer);
}
break;
case 'c':
case 's':
/* cAA..AA Continue at address AA..AA(optional) */
/* sAA..AA Step one instruction from AA..AA(optional) */
/* try to read optional parameter, pc unchanged if no parm */
ptr = &remcomInBuffer[1];
if (hexToInt(&ptr,&addr))
registers[ PC ] = addr;
newPC = registers[ PC];
/* clear the trace bit */
registers[ PS ] &= 0xfffffeff;
/* set the trace bit if we're stepping */
if (remcomInBuffer[0] == 's') registers[ PS ] |= 0x100;
registers_to_frame (registers, frame);
return RETURN_TO_PROGRAM;
case 'k':
/* kill the program */
KillMe (handle);
ResumeThread (mainthread);
return RETURN_TO_PROGRAM;
}
/* reply to the request */
if (! putpacket(remcomOutBuffer))
return RETURN_TO_NEXT_DEBUGGER;
}
}
/* Start up. The main thread opens the named serial I/O port, loads
the named NLM module and then goes to sleep. The serial I/O port
is named as a board number and a port number. It would be more DOS
like to provide a menu of available serial ports, but I don't want
to have to figure out how to do that. */
int
main (argc, argv)
int argc;
char **argv;
{
int hardware, board, port;
LONG err;
struct debuggerStructure s;
char *cmdlin;
int i;
/* Create a screen for the debugger. */
console_screen = CreateScreen ("System Console", 0);
if (DisplayScreen (console_screen) != ESUCCESS)
fprintf (stderr, "DisplayScreen failed\n");
if (argc < 4)
{
fprintf (stderr,
"Usage: load gdbserver board port program [arguments]\n");
exit (1);
}
hardware = -1;
board = strtol (argv[1], (char **) NULL, 0);
port = strtol (argv[2], (char **) NULL, 0);
err = AIOAcquirePort (&hardware, &board, &port, &AIOhandle);
if (err != AIO_SUCCESS)
{
switch (err)
{
case AIO_PORT_NOT_AVAILABLE:
fprintf (stderr, "Port not available\n");
break;
case AIO_BOARD_NUMBER_INVALID:
case AIO_PORT_NUMBER_INVALID:
fprintf (stderr, "No such port\n");
break;
default:
fprintf (stderr, "Could not open port: %d\n", err);
break;
}
exit (1);
}
err = AIOConfigurePort (AIOhandle, AIO_BAUD_9600, AIO_DATA_BITS_8,
AIO_STOP_BITS_1, AIO_PARITY_NONE,
AIO_HARDWARE_FLOW_CONTROL_OFF);
if (err != AIO_SUCCESS)
{
fprintf (stderr, "Could not configure port: %d\n", err);
AIOReleasePort (AIOhandle);
exit (1);
}
/* Register ourselves as an alternate debugger. */
memset (&s, 0, sizeof s);
s.DDSResourceTag = ((struct ResourceTagStructure *)
AllocateResourceTag (GetNLMHandle (),
"gdbserver",
DebuggerSignature));
if (s.DDSResourceTag == 0)
{
fprintf (stderr, "AllocateResourceTag failed\n");
AIOReleasePort (AIOhandle);
exit (1);
}
s.DDSdebuggerEntry = handle_exception;
s.DDSFlags = TSS_FRAME_BIT;
err = RegisterDebuggerRTag (&s, AT_FIRST);
if (err != 0)
{
fprintf (stderr, "RegisterDebuggerRTag failed\n");
AIOReleasePort (AIOhandle);
exit (1);
}
/* Get the command line we were invoked with, and advance it past
our name and the board and port arguments. */
cmdlin = getcmd ((char *) NULL);
for (i = 0; i < 2; i++)
{
while (! isspace (*cmdlin))
++cmdlin;
while (isspace (*cmdlin))
++cmdlin;
}
/* In case GDB is started before us, ack any packets (presumably
"$?#xx") sitting there. */
if (! putDebugChar ('+'))
{
fprintf (stderr, "putDebugChar failed\n");
UnRegisterDebugger (&s);
AIOReleasePort (AIOhandle);
exit (1);
}
mainthread = GetThreadID ();
handle = NULL;
talking = 0;
if (remote_debug > 0)
ConsolePrintf ("About to call LoadModule with \"%s\" %d %d\r\n",
cmdlin, console_screen, __GetScreenID (console_screen));
/* Start up the module to be debugged. */
err = LoadModule ((struct ScreenStruct *) __GetScreenID (console_screen),
cmdlin, LO_DEBUG);
if (err != 0)
{
fprintf (stderr, "LoadModule failed: %d\n", err);
UnRegisterDebugger (&s);
AIOReleasePort (AIOhandle);
exit (1);
}
/* Wait for the debugger to wake us up. */
if (remote_debug > 0)
ConsolePrintf ("Suspending main thread (%d)\r\n", mainthread);
SuspendThread (mainthread);
if (remote_debug > 0)
ConsolePrintf ("Resuming main thread (%d)\r\n", mainthread);
/* If we are woken up, print an optional error message, deregister
ourselves and exit. */
if (error_message != NULL)
fprintf (stderr, "%s\n", error_message);
UnRegisterDebugger (&s);
AIOReleasePort (AIOhandle);
exit (0);
}
Reference in New Issue View Git Blame Copy Permalink