mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-21 04:42:53 +08:00
268a13a5a3
This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
1448 lines
43 KiB
C
1448 lines
43 KiB
C
/* GDB routines for manipulating the minimal symbol tables.
|
||
Copyright (C) 1992-2019 Free Software Foundation, Inc.
|
||
Contributed by Cygnus Support, using pieces from other GDB modules.
|
||
|
||
This file is part of GDB.
|
||
|
||
This program is free software; you can redistribute it and/or modify
|
||
it under the terms of the GNU General Public License as published by
|
||
the Free Software Foundation; either version 3 of the License, or
|
||
(at your option) any later version.
|
||
|
||
This program is distributed in the hope that it will be useful,
|
||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
GNU General Public License for more details.
|
||
|
||
You should have received a copy of the GNU General Public License
|
||
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
||
|
||
|
||
/* This file contains support routines for creating, manipulating, and
|
||
destroying minimal symbol tables.
|
||
|
||
Minimal symbol tables are used to hold some very basic information about
|
||
all defined global symbols (text, data, bss, abs, etc). The only two
|
||
required pieces of information are the symbol's name and the address
|
||
associated with that symbol.
|
||
|
||
In many cases, even if a file was compiled with no special options for
|
||
debugging at all, as long as was not stripped it will contain sufficient
|
||
information to build useful minimal symbol tables using this structure.
|
||
|
||
Even when a file contains enough debugging information to build a full
|
||
symbol table, these minimal symbols are still useful for quickly mapping
|
||
between names and addresses, and vice versa. They are also sometimes used
|
||
to figure out what full symbol table entries need to be read in. */
|
||
|
||
|
||
#include "defs.h"
|
||
#include <ctype.h>
|
||
#include "symtab.h"
|
||
#include "bfd.h"
|
||
#include "filenames.h"
|
||
#include "symfile.h"
|
||
#include "objfiles.h"
|
||
#include "demangle.h"
|
||
#include "value.h"
|
||
#include "cp-abi.h"
|
||
#include "target.h"
|
||
#include "cp-support.h"
|
||
#include "language.h"
|
||
#include "cli/cli-utils.h"
|
||
#include "gdbsupport/symbol.h"
|
||
#include <algorithm>
|
||
#include "safe-ctype.h"
|
||
|
||
/* See minsyms.h. */
|
||
|
||
bool
|
||
msymbol_is_function (struct objfile *objfile, minimal_symbol *minsym,
|
||
CORE_ADDR *func_address_p)
|
||
{
|
||
CORE_ADDR msym_addr = MSYMBOL_VALUE_ADDRESS (objfile, minsym);
|
||
|
||
switch (minsym->type)
|
||
{
|
||
case mst_slot_got_plt:
|
||
case mst_data:
|
||
case mst_bss:
|
||
case mst_abs:
|
||
case mst_file_data:
|
||
case mst_file_bss:
|
||
case mst_data_gnu_ifunc:
|
||
{
|
||
struct gdbarch *gdbarch = get_objfile_arch (objfile);
|
||
CORE_ADDR pc
|
||
= gdbarch_convert_from_func_ptr_addr (gdbarch, msym_addr,
|
||
current_top_target ());
|
||
if (pc != msym_addr)
|
||
{
|
||
if (func_address_p != NULL)
|
||
*func_address_p = pc;
|
||
return true;
|
||
}
|
||
return false;
|
||
}
|
||
default:
|
||
if (func_address_p != NULL)
|
||
*func_address_p = msym_addr;
|
||
return true;
|
||
}
|
||
}
|
||
|
||
/* Accumulate the minimal symbols for each objfile in bunches of BUNCH_SIZE.
|
||
At the end, copy them all into one newly allocated array. */
|
||
|
||
#define BUNCH_SIZE 127
|
||
|
||
struct msym_bunch
|
||
{
|
||
struct msym_bunch *next;
|
||
struct minimal_symbol contents[BUNCH_SIZE];
|
||
};
|
||
|
||
/* See minsyms.h. */
|
||
|
||
unsigned int
|
||
msymbol_hash_iw (const char *string)
|
||
{
|
||
unsigned int hash = 0;
|
||
|
||
while (*string && *string != '(')
|
||
{
|
||
string = skip_spaces (string);
|
||
if (*string && *string != '(')
|
||
{
|
||
hash = SYMBOL_HASH_NEXT (hash, *string);
|
||
++string;
|
||
}
|
||
}
|
||
return hash;
|
||
}
|
||
|
||
/* See minsyms.h. */
|
||
|
||
unsigned int
|
||
msymbol_hash (const char *string)
|
||
{
|
||
unsigned int hash = 0;
|
||
|
||
for (; *string; ++string)
|
||
hash = SYMBOL_HASH_NEXT (hash, *string);
|
||
return hash;
|
||
}
|
||
|
||
/* Add the minimal symbol SYM to an objfile's minsym hash table, TABLE. */
|
||
static void
|
||
add_minsym_to_hash_table (struct minimal_symbol *sym,
|
||
struct minimal_symbol **table)
|
||
{
|
||
if (sym->hash_next == NULL)
|
||
{
|
||
unsigned int hash
|
||
= msymbol_hash (MSYMBOL_LINKAGE_NAME (sym)) % MINIMAL_SYMBOL_HASH_SIZE;
|
||
|
||
sym->hash_next = table[hash];
|
||
table[hash] = sym;
|
||
}
|
||
}
|
||
|
||
/* Add the minimal symbol SYM to an objfile's minsym demangled hash table,
|
||
TABLE. */
|
||
static void
|
||
add_minsym_to_demangled_hash_table (struct minimal_symbol *sym,
|
||
struct objfile *objfile)
|
||
{
|
||
if (sym->demangled_hash_next == NULL)
|
||
{
|
||
unsigned int hash = search_name_hash (MSYMBOL_LANGUAGE (sym),
|
||
MSYMBOL_SEARCH_NAME (sym));
|
||
|
||
objfile->per_bfd->demangled_hash_languages.set (MSYMBOL_LANGUAGE (sym));
|
||
|
||
struct minimal_symbol **table
|
||
= objfile->per_bfd->msymbol_demangled_hash;
|
||
unsigned int hash_index = hash % MINIMAL_SYMBOL_HASH_SIZE;
|
||
sym->demangled_hash_next = table[hash_index];
|
||
table[hash_index] = sym;
|
||
}
|
||
}
|
||
|
||
/* Worker object for lookup_minimal_symbol. Stores temporary results
|
||
while walking the symbol tables. */
|
||
|
||
struct found_minimal_symbols
|
||
{
|
||
/* External symbols are best. */
|
||
bound_minimal_symbol external_symbol {};
|
||
|
||
/* File-local symbols are next best. */
|
||
bound_minimal_symbol file_symbol {};
|
||
|
||
/* Symbols for shared library trampolines are next best. */
|
||
bound_minimal_symbol trampoline_symbol {};
|
||
|
||
/* Called when a symbol name matches. Check if the minsym is a
|
||
better type than what we had already found, and record it in one
|
||
of the members fields if so. Returns true if we collected the
|
||
real symbol, in which case we can stop searching. */
|
||
bool maybe_collect (const char *sfile, objfile *objf,
|
||
minimal_symbol *msymbol);
|
||
};
|
||
|
||
/* See declaration above. */
|
||
|
||
bool
|
||
found_minimal_symbols::maybe_collect (const char *sfile,
|
||
struct objfile *objfile,
|
||
minimal_symbol *msymbol)
|
||
{
|
||
switch (MSYMBOL_TYPE (msymbol))
|
||
{
|
||
case mst_file_text:
|
||
case mst_file_data:
|
||
case mst_file_bss:
|
||
if (sfile == NULL
|
||
|| filename_cmp (msymbol->filename, sfile) == 0)
|
||
{
|
||
file_symbol.minsym = msymbol;
|
||
file_symbol.objfile = objfile;
|
||
}
|
||
break;
|
||
|
||
case mst_solib_trampoline:
|
||
|
||
/* If a trampoline symbol is found, we prefer to keep
|
||
looking for the *real* symbol. If the actual symbol
|
||
is not found, then we'll use the trampoline
|
||
entry. */
|
||
if (trampoline_symbol.minsym == NULL)
|
||
{
|
||
trampoline_symbol.minsym = msymbol;
|
||
trampoline_symbol.objfile = objfile;
|
||
}
|
||
break;
|
||
|
||
case mst_unknown:
|
||
default:
|
||
external_symbol.minsym = msymbol;
|
||
external_symbol.objfile = objfile;
|
||
/* We have the real symbol. No use looking further. */
|
||
return true;
|
||
}
|
||
|
||
/* Keep looking. */
|
||
return false;
|
||
}
|
||
|
||
/* Walk the mangled name hash table, and pass each symbol whose name
|
||
matches LOOKUP_NAME according to NAMECMP to FOUND. */
|
||
|
||
static void
|
||
lookup_minimal_symbol_mangled (const char *lookup_name,
|
||
const char *sfile,
|
||
struct objfile *objfile,
|
||
struct minimal_symbol **table,
|
||
unsigned int hash,
|
||
int (*namecmp) (const char *, const char *),
|
||
found_minimal_symbols &found)
|
||
{
|
||
for (minimal_symbol *msymbol = table[hash];
|
||
msymbol != NULL;
|
||
msymbol = msymbol->hash_next)
|
||
{
|
||
const char *symbol_name = MSYMBOL_LINKAGE_NAME (msymbol);
|
||
|
||
if (namecmp (symbol_name, lookup_name) == 0
|
||
&& found.maybe_collect (sfile, objfile, msymbol))
|
||
return;
|
||
}
|
||
}
|
||
|
||
/* Walk the demangled name hash table, and pass each symbol whose name
|
||
matches LOOKUP_NAME according to MATCHER to FOUND. */
|
||
|
||
static void
|
||
lookup_minimal_symbol_demangled (const lookup_name_info &lookup_name,
|
||
const char *sfile,
|
||
struct objfile *objfile,
|
||
struct minimal_symbol **table,
|
||
unsigned int hash,
|
||
symbol_name_matcher_ftype *matcher,
|
||
found_minimal_symbols &found)
|
||
{
|
||
for (minimal_symbol *msymbol = table[hash];
|
||
msymbol != NULL;
|
||
msymbol = msymbol->demangled_hash_next)
|
||
{
|
||
const char *symbol_name = MSYMBOL_SEARCH_NAME (msymbol);
|
||
|
||
if (matcher (symbol_name, lookup_name, NULL)
|
||
&& found.maybe_collect (sfile, objfile, msymbol))
|
||
return;
|
||
}
|
||
}
|
||
|
||
/* Look through all the current minimal symbol tables and find the
|
||
first minimal symbol that matches NAME. If OBJF is non-NULL, limit
|
||
the search to that objfile. If SFILE is non-NULL, the only file-scope
|
||
symbols considered will be from that source file (global symbols are
|
||
still preferred). Returns a pointer to the minimal symbol that
|
||
matches, or NULL if no match is found.
|
||
|
||
Note: One instance where there may be duplicate minimal symbols with
|
||
the same name is when the symbol tables for a shared library and the
|
||
symbol tables for an executable contain global symbols with the same
|
||
names (the dynamic linker deals with the duplication).
|
||
|
||
It's also possible to have minimal symbols with different mangled
|
||
names, but identical demangled names. For example, the GNU C++ v3
|
||
ABI requires the generation of two (or perhaps three) copies of
|
||
constructor functions --- "in-charge", "not-in-charge", and
|
||
"allocate" copies; destructors may be duplicated as well.
|
||
Obviously, there must be distinct mangled names for each of these,
|
||
but the demangled names are all the same: S::S or S::~S. */
|
||
|
||
struct bound_minimal_symbol
|
||
lookup_minimal_symbol (const char *name, const char *sfile,
|
||
struct objfile *objf)
|
||
{
|
||
found_minimal_symbols found;
|
||
|
||
unsigned int mangled_hash = msymbol_hash (name) % MINIMAL_SYMBOL_HASH_SIZE;
|
||
|
||
auto *mangled_cmp
|
||
= (case_sensitivity == case_sensitive_on
|
||
? strcmp
|
||
: strcasecmp);
|
||
|
||
if (sfile != NULL)
|
||
sfile = lbasename (sfile);
|
||
|
||
lookup_name_info lookup_name (name, symbol_name_match_type::FULL);
|
||
|
||
for (objfile *objfile : current_program_space->objfiles ())
|
||
{
|
||
if (found.external_symbol.minsym != NULL)
|
||
break;
|
||
|
||
if (objf == NULL || objf == objfile
|
||
|| objf == objfile->separate_debug_objfile_backlink)
|
||
{
|
||
if (symbol_lookup_debug)
|
||
{
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"lookup_minimal_symbol (%s, %s, %s)\n",
|
||
name, sfile != NULL ? sfile : "NULL",
|
||
objfile_debug_name (objfile));
|
||
}
|
||
|
||
/* Do two passes: the first over the ordinary hash table,
|
||
and the second over the demangled hash table. */
|
||
lookup_minimal_symbol_mangled (name, sfile, objfile,
|
||
objfile->per_bfd->msymbol_hash,
|
||
mangled_hash, mangled_cmp, found);
|
||
|
||
/* If not found, try the demangled hash table. */
|
||
if (found.external_symbol.minsym == NULL)
|
||
{
|
||
/* Once for each language in the demangled hash names
|
||
table (usually just zero or one languages). */
|
||
for (unsigned iter = 0; iter < nr_languages; ++iter)
|
||
{
|
||
if (!objfile->per_bfd->demangled_hash_languages.test (iter))
|
||
continue;
|
||
enum language lang = (enum language) iter;
|
||
|
||
unsigned int hash
|
||
= (lookup_name.search_name_hash (lang)
|
||
% MINIMAL_SYMBOL_HASH_SIZE);
|
||
|
||
symbol_name_matcher_ftype *match
|
||
= get_symbol_name_matcher (language_def (lang),
|
||
lookup_name);
|
||
struct minimal_symbol **msymbol_demangled_hash
|
||
= objfile->per_bfd->msymbol_demangled_hash;
|
||
|
||
lookup_minimal_symbol_demangled (lookup_name, sfile, objfile,
|
||
msymbol_demangled_hash,
|
||
hash, match, found);
|
||
|
||
if (found.external_symbol.minsym != NULL)
|
||
break;
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
/* External symbols are best. */
|
||
if (found.external_symbol.minsym != NULL)
|
||
{
|
||
if (symbol_lookup_debug)
|
||
{
|
||
minimal_symbol *minsym = found.external_symbol.minsym;
|
||
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"lookup_minimal_symbol (...) = %s (external)\n",
|
||
host_address_to_string (minsym));
|
||
}
|
||
return found.external_symbol;
|
||
}
|
||
|
||
/* File-local symbols are next best. */
|
||
if (found.file_symbol.minsym != NULL)
|
||
{
|
||
if (symbol_lookup_debug)
|
||
{
|
||
minimal_symbol *minsym = found.file_symbol.minsym;
|
||
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"lookup_minimal_symbol (...) = %s (file-local)\n",
|
||
host_address_to_string (minsym));
|
||
}
|
||
return found.file_symbol;
|
||
}
|
||
|
||
/* Symbols for shared library trampolines are next best. */
|
||
if (found.trampoline_symbol.minsym != NULL)
|
||
{
|
||
if (symbol_lookup_debug)
|
||
{
|
||
minimal_symbol *minsym = found.trampoline_symbol.minsym;
|
||
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"lookup_minimal_symbol (...) = %s (trampoline)\n",
|
||
host_address_to_string (minsym));
|
||
}
|
||
|
||
return found.trampoline_symbol;
|
||
}
|
||
|
||
/* Not found. */
|
||
if (symbol_lookup_debug)
|
||
fprintf_unfiltered (gdb_stdlog, "lookup_minimal_symbol (...) = NULL\n");
|
||
return {};
|
||
}
|
||
|
||
/* See minsyms.h. */
|
||
|
||
struct bound_minimal_symbol
|
||
lookup_bound_minimal_symbol (const char *name)
|
||
{
|
||
return lookup_minimal_symbol (name, NULL, NULL);
|
||
}
|
||
|
||
/* See gdbsupport/symbol.h. */
|
||
|
||
int
|
||
find_minimal_symbol_address (const char *name, CORE_ADDR *addr,
|
||
struct objfile *objfile)
|
||
{
|
||
struct bound_minimal_symbol sym
|
||
= lookup_minimal_symbol (name, NULL, objfile);
|
||
|
||
if (sym.minsym != NULL)
|
||
*addr = BMSYMBOL_VALUE_ADDRESS (sym);
|
||
|
||
return sym.minsym == NULL;
|
||
}
|
||
|
||
/* Get the lookup name form best suitable for linkage name
|
||
matching. */
|
||
|
||
static const char *
|
||
linkage_name_str (const lookup_name_info &lookup_name)
|
||
{
|
||
/* Unlike most languages (including C++), Ada uses the
|
||
encoded/linkage name as the search name recorded in symbols. So
|
||
if debugging in Ada mode, prefer the Ada-encoded name. This also
|
||
makes Ada's verbatim match syntax ("<...>") work, because
|
||
"lookup_name.name()" includes the "<>"s, while
|
||
"lookup_name.ada().lookup_name()" is the encoded name with "<>"s
|
||
stripped. */
|
||
if (current_language->la_language == language_ada)
|
||
return lookup_name.ada ().lookup_name ().c_str ();
|
||
|
||
return lookup_name.name ().c_str ();
|
||
}
|
||
|
||
/* See minsyms.h. */
|
||
|
||
void
|
||
iterate_over_minimal_symbols
|
||
(struct objfile *objf, const lookup_name_info &lookup_name,
|
||
gdb::function_view<bool (struct minimal_symbol *)> callback)
|
||
{
|
||
/* The first pass is over the ordinary hash table. */
|
||
{
|
||
const char *name = linkage_name_str (lookup_name);
|
||
unsigned int hash = msymbol_hash (name) % MINIMAL_SYMBOL_HASH_SIZE;
|
||
auto *mangled_cmp
|
||
= (case_sensitivity == case_sensitive_on
|
||
? strcmp
|
||
: strcasecmp);
|
||
|
||
for (minimal_symbol *iter = objf->per_bfd->msymbol_hash[hash];
|
||
iter != NULL;
|
||
iter = iter->hash_next)
|
||
{
|
||
if (mangled_cmp (MSYMBOL_LINKAGE_NAME (iter), name) == 0)
|
||
if (callback (iter))
|
||
return;
|
||
}
|
||
}
|
||
|
||
/* The second pass is over the demangled table. Once for each
|
||
language in the demangled hash names table (usually just zero or
|
||
one). */
|
||
for (unsigned liter = 0; liter < nr_languages; ++liter)
|
||
{
|
||
if (!objf->per_bfd->demangled_hash_languages.test (liter))
|
||
continue;
|
||
|
||
enum language lang = (enum language) liter;
|
||
const language_defn *lang_def = language_def (lang);
|
||
symbol_name_matcher_ftype *name_match
|
||
= get_symbol_name_matcher (lang_def, lookup_name);
|
||
|
||
unsigned int hash
|
||
= lookup_name.search_name_hash (lang) % MINIMAL_SYMBOL_HASH_SIZE;
|
||
for (minimal_symbol *iter = objf->per_bfd->msymbol_demangled_hash[hash];
|
||
iter != NULL;
|
||
iter = iter->demangled_hash_next)
|
||
if (name_match (MSYMBOL_SEARCH_NAME (iter), lookup_name, NULL))
|
||
if (callback (iter))
|
||
return;
|
||
}
|
||
}
|
||
|
||
/* See minsyms.h. */
|
||
|
||
struct bound_minimal_symbol
|
||
lookup_minimal_symbol_text (const char *name, struct objfile *objf)
|
||
{
|
||
struct minimal_symbol *msymbol;
|
||
struct bound_minimal_symbol found_symbol = { NULL, NULL };
|
||
struct bound_minimal_symbol found_file_symbol = { NULL, NULL };
|
||
|
||
unsigned int hash = msymbol_hash (name) % MINIMAL_SYMBOL_HASH_SIZE;
|
||
|
||
for (objfile *objfile : current_program_space->objfiles ())
|
||
{
|
||
if (found_symbol.minsym != NULL)
|
||
break;
|
||
|
||
if (objf == NULL || objf == objfile
|
||
|| objf == objfile->separate_debug_objfile_backlink)
|
||
{
|
||
for (msymbol = objfile->per_bfd->msymbol_hash[hash];
|
||
msymbol != NULL && found_symbol.minsym == NULL;
|
||
msymbol = msymbol->hash_next)
|
||
{
|
||
if (strcmp (MSYMBOL_LINKAGE_NAME (msymbol), name) == 0 &&
|
||
(MSYMBOL_TYPE (msymbol) == mst_text
|
||
|| MSYMBOL_TYPE (msymbol) == mst_text_gnu_ifunc
|
||
|| MSYMBOL_TYPE (msymbol) == mst_file_text))
|
||
{
|
||
switch (MSYMBOL_TYPE (msymbol))
|
||
{
|
||
case mst_file_text:
|
||
found_file_symbol.minsym = msymbol;
|
||
found_file_symbol.objfile = objfile;
|
||
break;
|
||
default:
|
||
found_symbol.minsym = msymbol;
|
||
found_symbol.objfile = objfile;
|
||
break;
|
||
}
|
||
}
|
||
}
|
||
}
|
||
}
|
||
/* External symbols are best. */
|
||
if (found_symbol.minsym)
|
||
return found_symbol;
|
||
|
||
/* File-local symbols are next best. */
|
||
return found_file_symbol;
|
||
}
|
||
|
||
/* See minsyms.h. */
|
||
|
||
struct minimal_symbol *
|
||
lookup_minimal_symbol_by_pc_name (CORE_ADDR pc, const char *name,
|
||
struct objfile *objf)
|
||
{
|
||
struct minimal_symbol *msymbol;
|
||
|
||
unsigned int hash = msymbol_hash (name) % MINIMAL_SYMBOL_HASH_SIZE;
|
||
|
||
for (objfile *objfile : current_program_space->objfiles ())
|
||
{
|
||
if (objf == NULL || objf == objfile
|
||
|| objf == objfile->separate_debug_objfile_backlink)
|
||
{
|
||
for (msymbol = objfile->per_bfd->msymbol_hash[hash];
|
||
msymbol != NULL;
|
||
msymbol = msymbol->hash_next)
|
||
{
|
||
if (MSYMBOL_VALUE_ADDRESS (objfile, msymbol) == pc
|
||
&& strcmp (MSYMBOL_LINKAGE_NAME (msymbol), name) == 0)
|
||
return msymbol;
|
||
}
|
||
}
|
||
}
|
||
|
||
return NULL;
|
||
}
|
||
|
||
/* A helper function that makes *PC section-relative. This searches
|
||
the sections of OBJFILE and if *PC is in a section, it subtracts
|
||
the section offset and returns true. Otherwise it returns
|
||
false. */
|
||
|
||
static int
|
||
frob_address (struct objfile *objfile, CORE_ADDR *pc)
|
||
{
|
||
struct obj_section *iter;
|
||
|
||
ALL_OBJFILE_OSECTIONS (objfile, iter)
|
||
{
|
||
if (*pc >= obj_section_addr (iter) && *pc < obj_section_endaddr (iter))
|
||
{
|
||
*pc -= obj_section_offset (iter);
|
||
return 1;
|
||
}
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
/* Helper for lookup_minimal_symbol_by_pc_section. Convert a
|
||
lookup_msym_prefer to a minimal_symbol_type. */
|
||
|
||
static minimal_symbol_type
|
||
msym_prefer_to_msym_type (lookup_msym_prefer prefer)
|
||
{
|
||
switch (prefer)
|
||
{
|
||
case lookup_msym_prefer::TEXT:
|
||
return mst_text;
|
||
case lookup_msym_prefer::TRAMPOLINE:
|
||
return mst_solib_trampoline;
|
||
case lookup_msym_prefer::GNU_IFUNC:
|
||
return mst_text_gnu_ifunc;
|
||
}
|
||
|
||
/* Assert here instead of in a default switch case above so that
|
||
-Wswitch warns if a new enumerator is added. */
|
||
gdb_assert_not_reached ("unhandled lookup_msym_prefer");
|
||
}
|
||
|
||
/* Search through the minimal symbol table for each objfile and find
|
||
the symbol whose address is the largest address that is still less
|
||
than or equal to PC, and matches SECTION (which is not NULL).
|
||
Returns a pointer to the minimal symbol if such a symbol is found,
|
||
or NULL if PC is not in a suitable range.
|
||
Note that we need to look through ALL the minimal symbol tables
|
||
before deciding on the symbol that comes closest to the specified PC.
|
||
This is because objfiles can overlap, for example objfile A has .text
|
||
at 0x100 and .data at 0x40000 and objfile B has .text at 0x234 and
|
||
.data at 0x40048.
|
||
|
||
If WANT_TRAMPOLINE is set, prefer mst_solib_trampoline symbols when
|
||
there are text and trampoline symbols at the same address.
|
||
Otherwise prefer mst_text symbols. */
|
||
|
||
bound_minimal_symbol
|
||
lookup_minimal_symbol_by_pc_section (CORE_ADDR pc_in, struct obj_section *section,
|
||
lookup_msym_prefer prefer)
|
||
{
|
||
int lo;
|
||
int hi;
|
||
int newobj;
|
||
struct minimal_symbol *msymbol;
|
||
struct minimal_symbol *best_symbol = NULL;
|
||
struct objfile *best_objfile = NULL;
|
||
struct bound_minimal_symbol result;
|
||
|
||
if (section == NULL)
|
||
{
|
||
section = find_pc_section (pc_in);
|
||
if (section == NULL)
|
||
return {};
|
||
}
|
||
|
||
minimal_symbol_type want_type = msym_prefer_to_msym_type (prefer);
|
||
|
||
/* We can not require the symbol found to be in section, because
|
||
e.g. IRIX 6.5 mdebug relies on this code returning an absolute
|
||
symbol - but find_pc_section won't return an absolute section and
|
||
hence the code below would skip over absolute symbols. We can
|
||
still take advantage of the call to find_pc_section, though - the
|
||
object file still must match. In case we have separate debug
|
||
files, search both the file and its separate debug file. There's
|
||
no telling which one will have the minimal symbols. */
|
||
|
||
gdb_assert (section != NULL);
|
||
|
||
for (objfile *objfile : section->objfile->separate_debug_objfiles ())
|
||
{
|
||
CORE_ADDR pc = pc_in;
|
||
|
||
/* If this objfile has a minimal symbol table, go search it
|
||
using a binary search. */
|
||
|
||
if (objfile->per_bfd->minimal_symbol_count > 0)
|
||
{
|
||
int best_zero_sized = -1;
|
||
|
||
msymbol = objfile->per_bfd->msymbols.get ();
|
||
lo = 0;
|
||
hi = objfile->per_bfd->minimal_symbol_count - 1;
|
||
|
||
/* This code assumes that the minimal symbols are sorted by
|
||
ascending address values. If the pc value is greater than or
|
||
equal to the first symbol's address, then some symbol in this
|
||
minimal symbol table is a suitable candidate for being the
|
||
"best" symbol. This includes the last real symbol, for cases
|
||
where the pc value is larger than any address in this vector.
|
||
|
||
By iterating until the address associated with the current
|
||
hi index (the endpoint of the test interval) is less than
|
||
or equal to the desired pc value, we accomplish two things:
|
||
(1) the case where the pc value is larger than any minimal
|
||
symbol address is trivially solved, (2) the address associated
|
||
with the hi index is always the one we want when the interation
|
||
terminates. In essence, we are iterating the test interval
|
||
down until the pc value is pushed out of it from the high end.
|
||
|
||
Warning: this code is trickier than it would appear at first. */
|
||
|
||
if (frob_address (objfile, &pc)
|
||
&& pc >= MSYMBOL_VALUE_RAW_ADDRESS (&msymbol[lo]))
|
||
{
|
||
while (MSYMBOL_VALUE_RAW_ADDRESS (&msymbol[hi]) > pc)
|
||
{
|
||
/* pc is still strictly less than highest address. */
|
||
/* Note "new" will always be >= lo. */
|
||
newobj = (lo + hi) / 2;
|
||
if ((MSYMBOL_VALUE_RAW_ADDRESS (&msymbol[newobj]) >= pc)
|
||
|| (lo == newobj))
|
||
{
|
||
hi = newobj;
|
||
}
|
||
else
|
||
{
|
||
lo = newobj;
|
||
}
|
||
}
|
||
|
||
/* If we have multiple symbols at the same address, we want
|
||
hi to point to the last one. That way we can find the
|
||
right symbol if it has an index greater than hi. */
|
||
while (hi < objfile->per_bfd->minimal_symbol_count - 1
|
||
&& (MSYMBOL_VALUE_RAW_ADDRESS (&msymbol[hi])
|
||
== MSYMBOL_VALUE_RAW_ADDRESS (&msymbol[hi + 1])))
|
||
hi++;
|
||
|
||
/* Skip various undesirable symbols. */
|
||
while (hi >= 0)
|
||
{
|
||
/* Skip any absolute symbols. This is apparently
|
||
what adb and dbx do, and is needed for the CM-5.
|
||
There are two known possible problems: (1) on
|
||
ELF, apparently end, edata, etc. are absolute.
|
||
Not sure ignoring them here is a big deal, but if
|
||
we want to use them, the fix would go in
|
||
elfread.c. (2) I think shared library entry
|
||
points on the NeXT are absolute. If we want
|
||
special handling for this it probably should be
|
||
triggered by a special mst_abs_or_lib or some
|
||
such. */
|
||
|
||
if (MSYMBOL_TYPE (&msymbol[hi]) == mst_abs)
|
||
{
|
||
hi--;
|
||
continue;
|
||
}
|
||
|
||
/* If SECTION was specified, skip any symbol from
|
||
wrong section. */
|
||
if (section
|
||
/* Some types of debug info, such as COFF,
|
||
don't fill the bfd_section member, so don't
|
||
throw away symbols on those platforms. */
|
||
&& MSYMBOL_OBJ_SECTION (objfile, &msymbol[hi]) != NULL
|
||
&& (!matching_obj_sections
|
||
(MSYMBOL_OBJ_SECTION (objfile, &msymbol[hi]),
|
||
section)))
|
||
{
|
||
hi--;
|
||
continue;
|
||
}
|
||
|
||
/* If we are looking for a trampoline and this is a
|
||
text symbol, or the other way around, check the
|
||
preceding symbol too. If they are otherwise
|
||
identical prefer that one. */
|
||
if (hi > 0
|
||
&& MSYMBOL_TYPE (&msymbol[hi]) != want_type
|
||
&& MSYMBOL_TYPE (&msymbol[hi - 1]) == want_type
|
||
&& (MSYMBOL_SIZE (&msymbol[hi])
|
||
== MSYMBOL_SIZE (&msymbol[hi - 1]))
|
||
&& (MSYMBOL_VALUE_RAW_ADDRESS (&msymbol[hi])
|
||
== MSYMBOL_VALUE_RAW_ADDRESS (&msymbol[hi - 1]))
|
||
&& (MSYMBOL_OBJ_SECTION (objfile, &msymbol[hi])
|
||
== MSYMBOL_OBJ_SECTION (objfile, &msymbol[hi - 1])))
|
||
{
|
||
hi--;
|
||
continue;
|
||
}
|
||
|
||
/* If the minimal symbol has a zero size, save it
|
||
but keep scanning backwards looking for one with
|
||
a non-zero size. A zero size may mean that the
|
||
symbol isn't an object or function (e.g. a
|
||
label), or it may just mean that the size was not
|
||
specified. */
|
||
if (MSYMBOL_SIZE (&msymbol[hi]) == 0)
|
||
{
|
||
if (best_zero_sized == -1)
|
||
best_zero_sized = hi;
|
||
hi--;
|
||
continue;
|
||
}
|
||
|
||
/* If we are past the end of the current symbol, try
|
||
the previous symbol if it has a larger overlapping
|
||
size. This happens on i686-pc-linux-gnu with glibc;
|
||
the nocancel variants of system calls are inside
|
||
the cancellable variants, but both have sizes. */
|
||
if (hi > 0
|
||
&& MSYMBOL_SIZE (&msymbol[hi]) != 0
|
||
&& pc >= (MSYMBOL_VALUE_RAW_ADDRESS (&msymbol[hi])
|
||
+ MSYMBOL_SIZE (&msymbol[hi]))
|
||
&& pc < (MSYMBOL_VALUE_RAW_ADDRESS (&msymbol[hi - 1])
|
||
+ MSYMBOL_SIZE (&msymbol[hi - 1])))
|
||
{
|
||
hi--;
|
||
continue;
|
||
}
|
||
|
||
/* Otherwise, this symbol must be as good as we're going
|
||
to get. */
|
||
break;
|
||
}
|
||
|
||
/* If HI has a zero size, and best_zero_sized is set,
|
||
then we had two or more zero-sized symbols; prefer
|
||
the first one we found (which may have a higher
|
||
address). Also, if we ran off the end, be sure
|
||
to back up. */
|
||
if (best_zero_sized != -1
|
||
&& (hi < 0 || MSYMBOL_SIZE (&msymbol[hi]) == 0))
|
||
hi = best_zero_sized;
|
||
|
||
/* If the minimal symbol has a non-zero size, and this
|
||
PC appears to be outside the symbol's contents, then
|
||
refuse to use this symbol. If we found a zero-sized
|
||
symbol with an address greater than this symbol's,
|
||
use that instead. We assume that if symbols have
|
||
specified sizes, they do not overlap. */
|
||
|
||
if (hi >= 0
|
||
&& MSYMBOL_SIZE (&msymbol[hi]) != 0
|
||
&& pc >= (MSYMBOL_VALUE_RAW_ADDRESS (&msymbol[hi])
|
||
+ MSYMBOL_SIZE (&msymbol[hi])))
|
||
{
|
||
if (best_zero_sized != -1)
|
||
hi = best_zero_sized;
|
||
else
|
||
/* Go on to the next object file. */
|
||
continue;
|
||
}
|
||
|
||
/* The minimal symbol indexed by hi now is the best one in this
|
||
objfile's minimal symbol table. See if it is the best one
|
||
overall. */
|
||
|
||
if (hi >= 0
|
||
&& ((best_symbol == NULL) ||
|
||
(MSYMBOL_VALUE_RAW_ADDRESS (best_symbol) <
|
||
MSYMBOL_VALUE_RAW_ADDRESS (&msymbol[hi]))))
|
||
{
|
||
best_symbol = &msymbol[hi];
|
||
best_objfile = objfile;
|
||
}
|
||
}
|
||
}
|
||
}
|
||
|
||
result.minsym = best_symbol;
|
||
result.objfile = best_objfile;
|
||
return result;
|
||
}
|
||
|
||
/* See minsyms.h. */
|
||
|
||
struct bound_minimal_symbol
|
||
lookup_minimal_symbol_by_pc (CORE_ADDR pc)
|
||
{
|
||
return lookup_minimal_symbol_by_pc_section (pc, NULL);
|
||
}
|
||
|
||
/* Return non-zero iff PC is in an STT_GNU_IFUNC function resolver. */
|
||
|
||
int
|
||
in_gnu_ifunc_stub (CORE_ADDR pc)
|
||
{
|
||
bound_minimal_symbol msymbol
|
||
= lookup_minimal_symbol_by_pc_section (pc, NULL,
|
||
lookup_msym_prefer::GNU_IFUNC);
|
||
return msymbol.minsym && MSYMBOL_TYPE (msymbol.minsym) == mst_text_gnu_ifunc;
|
||
}
|
||
|
||
/* See elf_gnu_ifunc_resolve_addr for its real implementation. */
|
||
|
||
static CORE_ADDR
|
||
stub_gnu_ifunc_resolve_addr (struct gdbarch *gdbarch, CORE_ADDR pc)
|
||
{
|
||
error (_("GDB cannot resolve STT_GNU_IFUNC symbol at address %s without "
|
||
"the ELF support compiled in."),
|
||
paddress (gdbarch, pc));
|
||
}
|
||
|
||
/* See elf_gnu_ifunc_resolve_name for its real implementation. */
|
||
|
||
static int
|
||
stub_gnu_ifunc_resolve_name (const char *function_name,
|
||
CORE_ADDR *function_address_p)
|
||
{
|
||
error (_("GDB cannot resolve STT_GNU_IFUNC symbol \"%s\" without "
|
||
"the ELF support compiled in."),
|
||
function_name);
|
||
}
|
||
|
||
/* See elf_gnu_ifunc_resolver_stop for its real implementation. */
|
||
|
||
static void
|
||
stub_gnu_ifunc_resolver_stop (struct breakpoint *b)
|
||
{
|
||
internal_error (__FILE__, __LINE__,
|
||
_("elf_gnu_ifunc_resolver_stop cannot be reached."));
|
||
}
|
||
|
||
/* See elf_gnu_ifunc_resolver_return_stop for its real implementation. */
|
||
|
||
static void
|
||
stub_gnu_ifunc_resolver_return_stop (struct breakpoint *b)
|
||
{
|
||
internal_error (__FILE__, __LINE__,
|
||
_("elf_gnu_ifunc_resolver_return_stop cannot be reached."));
|
||
}
|
||
|
||
/* See elf_gnu_ifunc_fns for its real implementation. */
|
||
|
||
static const struct gnu_ifunc_fns stub_gnu_ifunc_fns =
|
||
{
|
||
stub_gnu_ifunc_resolve_addr,
|
||
stub_gnu_ifunc_resolve_name,
|
||
stub_gnu_ifunc_resolver_stop,
|
||
stub_gnu_ifunc_resolver_return_stop,
|
||
};
|
||
|
||
/* A placeholder for &elf_gnu_ifunc_fns. */
|
||
|
||
const struct gnu_ifunc_fns *gnu_ifunc_fns_p = &stub_gnu_ifunc_fns;
|
||
|
||
|
||
|
||
/* Return leading symbol character for a BFD. If BFD is NULL,
|
||
return the leading symbol character from the main objfile. */
|
||
|
||
static int
|
||
get_symbol_leading_char (bfd *abfd)
|
||
{
|
||
if (abfd != NULL)
|
||
return bfd_get_symbol_leading_char (abfd);
|
||
if (symfile_objfile != NULL && symfile_objfile->obfd != NULL)
|
||
return bfd_get_symbol_leading_char (symfile_objfile->obfd);
|
||
return 0;
|
||
}
|
||
|
||
/* See minsyms.h. */
|
||
|
||
minimal_symbol_reader::minimal_symbol_reader (struct objfile *obj)
|
||
: m_objfile (obj),
|
||
m_msym_bunch (NULL),
|
||
/* Note that presetting m_msym_bunch_index to BUNCH_SIZE causes the
|
||
first call to save a minimal symbol to allocate the memory for
|
||
the first bunch. */
|
||
m_msym_bunch_index (BUNCH_SIZE),
|
||
m_msym_count (0)
|
||
{
|
||
}
|
||
|
||
/* Discard the currently collected minimal symbols, if any. If we wish
|
||
to save them for later use, we must have already copied them somewhere
|
||
else before calling this function. */
|
||
|
||
minimal_symbol_reader::~minimal_symbol_reader ()
|
||
{
|
||
struct msym_bunch *next;
|
||
|
||
while (m_msym_bunch != NULL)
|
||
{
|
||
next = m_msym_bunch->next;
|
||
xfree (m_msym_bunch);
|
||
m_msym_bunch = next;
|
||
}
|
||
}
|
||
|
||
/* See minsyms.h. */
|
||
|
||
void
|
||
minimal_symbol_reader::record (const char *name, CORE_ADDR address,
|
||
enum minimal_symbol_type ms_type)
|
||
{
|
||
int section;
|
||
|
||
switch (ms_type)
|
||
{
|
||
case mst_text:
|
||
case mst_text_gnu_ifunc:
|
||
case mst_file_text:
|
||
case mst_solib_trampoline:
|
||
section = SECT_OFF_TEXT (m_objfile);
|
||
break;
|
||
case mst_data:
|
||
case mst_data_gnu_ifunc:
|
||
case mst_file_data:
|
||
section = SECT_OFF_DATA (m_objfile);
|
||
break;
|
||
case mst_bss:
|
||
case mst_file_bss:
|
||
section = SECT_OFF_BSS (m_objfile);
|
||
break;
|
||
default:
|
||
section = -1;
|
||
}
|
||
|
||
record_with_info (name, address, ms_type, section);
|
||
}
|
||
|
||
/* Convert an enumerator of type minimal_symbol_type to its string
|
||
representation. */
|
||
|
||
static const char *
|
||
mst_str (minimal_symbol_type t)
|
||
{
|
||
#define MST_TO_STR(x) case x: return #x;
|
||
switch (t)
|
||
{
|
||
MST_TO_STR (mst_unknown);
|
||
MST_TO_STR (mst_text);
|
||
MST_TO_STR (mst_text_gnu_ifunc);
|
||
MST_TO_STR (mst_slot_got_plt);
|
||
MST_TO_STR (mst_data);
|
||
MST_TO_STR (mst_bss);
|
||
MST_TO_STR (mst_abs);
|
||
MST_TO_STR (mst_solib_trampoline);
|
||
MST_TO_STR (mst_file_text);
|
||
MST_TO_STR (mst_file_data);
|
||
MST_TO_STR (mst_file_bss);
|
||
|
||
default:
|
||
return "mst_???";
|
||
}
|
||
#undef MST_TO_STR
|
||
}
|
||
|
||
/* See minsyms.h. */
|
||
|
||
struct minimal_symbol *
|
||
minimal_symbol_reader::record_full (const char *name, int name_len,
|
||
bool copy_name, CORE_ADDR address,
|
||
enum minimal_symbol_type ms_type,
|
||
int section)
|
||
{
|
||
struct msym_bunch *newobj;
|
||
struct minimal_symbol *msymbol;
|
||
|
||
/* Don't put gcc_compiled, __gnu_compiled_cplus, and friends into
|
||
the minimal symbols, because if there is also another symbol
|
||
at the same address (e.g. the first function of the file),
|
||
lookup_minimal_symbol_by_pc would have no way of getting the
|
||
right one. */
|
||
if (ms_type == mst_file_text && name[0] == 'g'
|
||
&& (strcmp (name, GCC_COMPILED_FLAG_SYMBOL) == 0
|
||
|| strcmp (name, GCC2_COMPILED_FLAG_SYMBOL) == 0))
|
||
return (NULL);
|
||
|
||
/* It's safe to strip the leading char here once, since the name
|
||
is also stored stripped in the minimal symbol table. */
|
||
if (name[0] == get_symbol_leading_char (m_objfile->obfd))
|
||
{
|
||
++name;
|
||
--name_len;
|
||
}
|
||
|
||
if (ms_type == mst_file_text && startswith (name, "__gnu_compiled"))
|
||
return (NULL);
|
||
|
||
if (symtab_create_debug >= 2)
|
||
printf_unfiltered ("Recording minsym: %-21s %18s %4d %s\n",
|
||
mst_str (ms_type), hex_string (address), section, name);
|
||
|
||
if (m_msym_bunch_index == BUNCH_SIZE)
|
||
{
|
||
newobj = XCNEW (struct msym_bunch);
|
||
m_msym_bunch_index = 0;
|
||
newobj->next = m_msym_bunch;
|
||
m_msym_bunch = newobj;
|
||
}
|
||
msymbol = &m_msym_bunch->contents[m_msym_bunch_index];
|
||
symbol_set_language (msymbol, language_auto,
|
||
&m_objfile->per_bfd->storage_obstack);
|
||
symbol_set_names (msymbol, name, name_len, copy_name, m_objfile->per_bfd);
|
||
|
||
SET_MSYMBOL_VALUE_ADDRESS (msymbol, address);
|
||
MSYMBOL_SECTION (msymbol) = section;
|
||
|
||
MSYMBOL_TYPE (msymbol) = ms_type;
|
||
|
||
/* If we already read minimal symbols for this objfile, then don't
|
||
ever allocate a new one. */
|
||
if (!m_objfile->per_bfd->minsyms_read)
|
||
{
|
||
m_msym_bunch_index++;
|
||
m_objfile->per_bfd->n_minsyms++;
|
||
}
|
||
m_msym_count++;
|
||
return msymbol;
|
||
}
|
||
|
||
/* Compare two minimal symbols by address and return a signed result based
|
||
on unsigned comparisons, so that we sort into unsigned numeric order.
|
||
Within groups with the same address, sort by name. */
|
||
|
||
static int
|
||
compare_minimal_symbols (const void *fn1p, const void *fn2p)
|
||
{
|
||
const struct minimal_symbol *fn1;
|
||
const struct minimal_symbol *fn2;
|
||
|
||
fn1 = (const struct minimal_symbol *) fn1p;
|
||
fn2 = (const struct minimal_symbol *) fn2p;
|
||
|
||
if (MSYMBOL_VALUE_RAW_ADDRESS (fn1) < MSYMBOL_VALUE_RAW_ADDRESS (fn2))
|
||
{
|
||
return (-1); /* addr 1 is less than addr 2. */
|
||
}
|
||
else if (MSYMBOL_VALUE_RAW_ADDRESS (fn1) > MSYMBOL_VALUE_RAW_ADDRESS (fn2))
|
||
{
|
||
return (1); /* addr 1 is greater than addr 2. */
|
||
}
|
||
else
|
||
/* addrs are equal: sort by name */
|
||
{
|
||
const char *name1 = MSYMBOL_LINKAGE_NAME (fn1);
|
||
const char *name2 = MSYMBOL_LINKAGE_NAME (fn2);
|
||
|
||
if (name1 && name2) /* both have names */
|
||
return strcmp (name1, name2);
|
||
else if (name2)
|
||
return 1; /* fn1 has no name, so it is "less". */
|
||
else if (name1) /* fn2 has no name, so it is "less". */
|
||
return -1;
|
||
else
|
||
return (0); /* Neither has a name, so they're equal. */
|
||
}
|
||
}
|
||
|
||
/* Compact duplicate entries out of a minimal symbol table by walking
|
||
through the table and compacting out entries with duplicate addresses
|
||
and matching names. Return the number of entries remaining.
|
||
|
||
On entry, the table resides between msymbol[0] and msymbol[mcount].
|
||
On exit, it resides between msymbol[0] and msymbol[result_count].
|
||
|
||
When files contain multiple sources of symbol information, it is
|
||
possible for the minimal symbol table to contain many duplicate entries.
|
||
As an example, SVR4 systems use ELF formatted object files, which
|
||
usually contain at least two different types of symbol tables (a
|
||
standard ELF one and a smaller dynamic linking table), as well as
|
||
DWARF debugging information for files compiled with -g.
|
||
|
||
Without compacting, the minimal symbol table for gdb itself contains
|
||
over a 1000 duplicates, about a third of the total table size. Aside
|
||
from the potential trap of not noticing that two successive entries
|
||
identify the same location, this duplication impacts the time required
|
||
to linearly scan the table, which is done in a number of places. So we
|
||
just do one linear scan here and toss out the duplicates.
|
||
|
||
Since the different sources of information for each symbol may
|
||
have different levels of "completeness", we may have duplicates
|
||
that have one entry with type "mst_unknown" and the other with a
|
||
known type. So if the one we are leaving alone has type mst_unknown,
|
||
overwrite its type with the type from the one we are compacting out. */
|
||
|
||
static int
|
||
compact_minimal_symbols (struct minimal_symbol *msymbol, int mcount,
|
||
struct objfile *objfile)
|
||
{
|
||
struct minimal_symbol *copyfrom;
|
||
struct minimal_symbol *copyto;
|
||
|
||
if (mcount > 0)
|
||
{
|
||
copyfrom = copyto = msymbol;
|
||
while (copyfrom < msymbol + mcount - 1)
|
||
{
|
||
if (MSYMBOL_VALUE_RAW_ADDRESS (copyfrom)
|
||
== MSYMBOL_VALUE_RAW_ADDRESS ((copyfrom + 1))
|
||
&& MSYMBOL_SECTION (copyfrom) == MSYMBOL_SECTION (copyfrom + 1)
|
||
&& strcmp (MSYMBOL_LINKAGE_NAME (copyfrom),
|
||
MSYMBOL_LINKAGE_NAME ((copyfrom + 1))) == 0)
|
||
{
|
||
if (MSYMBOL_TYPE ((copyfrom + 1)) == mst_unknown)
|
||
{
|
||
MSYMBOL_TYPE ((copyfrom + 1)) = MSYMBOL_TYPE (copyfrom);
|
||
}
|
||
copyfrom++;
|
||
}
|
||
else
|
||
*copyto++ = *copyfrom++;
|
||
}
|
||
*copyto++ = *copyfrom++;
|
||
mcount = copyto - msymbol;
|
||
}
|
||
return (mcount);
|
||
}
|
||
|
||
/* Build (or rebuild) the minimal symbol hash tables. This is necessary
|
||
after compacting or sorting the table since the entries move around
|
||
thus causing the internal minimal_symbol pointers to become jumbled. */
|
||
|
||
static void
|
||
build_minimal_symbol_hash_tables (struct objfile *objfile)
|
||
{
|
||
int i;
|
||
struct minimal_symbol *msym;
|
||
|
||
/* Clear the hash tables. */
|
||
for (i = 0; i < MINIMAL_SYMBOL_HASH_SIZE; i++)
|
||
{
|
||
objfile->per_bfd->msymbol_hash[i] = 0;
|
||
objfile->per_bfd->msymbol_demangled_hash[i] = 0;
|
||
}
|
||
|
||
/* Now, (re)insert the actual entries. */
|
||
for ((i = objfile->per_bfd->minimal_symbol_count,
|
||
msym = objfile->per_bfd->msymbols.get ());
|
||
i > 0;
|
||
i--, msym++)
|
||
{
|
||
msym->hash_next = 0;
|
||
add_minsym_to_hash_table (msym, objfile->per_bfd->msymbol_hash);
|
||
|
||
msym->demangled_hash_next = 0;
|
||
if (MSYMBOL_SEARCH_NAME (msym) != MSYMBOL_LINKAGE_NAME (msym))
|
||
add_minsym_to_demangled_hash_table (msym, objfile);
|
||
}
|
||
}
|
||
|
||
/* Add the minimal symbols in the existing bunches to the objfile's official
|
||
minimal symbol table. In most cases there is no minimal symbol table yet
|
||
for this objfile, and the existing bunches are used to create one. Once
|
||
in a while (for shared libraries for example), we add symbols (e.g. common
|
||
symbols) to an existing objfile. */
|
||
|
||
void
|
||
minimal_symbol_reader::install ()
|
||
{
|
||
int mcount;
|
||
struct msym_bunch *bunch;
|
||
struct minimal_symbol *msymbols;
|
||
int alloc_count;
|
||
|
||
if (m_objfile->per_bfd->minsyms_read)
|
||
return;
|
||
|
||
if (m_msym_count > 0)
|
||
{
|
||
if (symtab_create_debug)
|
||
{
|
||
fprintf_unfiltered (gdb_stdlog,
|
||
"Installing %d minimal symbols of objfile %s.\n",
|
||
m_msym_count, objfile_name (m_objfile));
|
||
}
|
||
|
||
/* Allocate enough space, into which we will gather the bunches
|
||
of new and existing minimal symbols, sort them, and then
|
||
compact out the duplicate entries. Once we have a final
|
||
table, we will give back the excess space. */
|
||
|
||
alloc_count = m_msym_count + m_objfile->per_bfd->minimal_symbol_count;
|
||
gdb::unique_xmalloc_ptr<minimal_symbol>
|
||
msym_holder (XNEWVEC (minimal_symbol, alloc_count));
|
||
msymbols = msym_holder.get ();
|
||
|
||
/* Copy in the existing minimal symbols, if there are any. */
|
||
|
||
if (m_objfile->per_bfd->minimal_symbol_count)
|
||
memcpy (msymbols, m_objfile->per_bfd->msymbols.get (),
|
||
m_objfile->per_bfd->minimal_symbol_count
|
||
* sizeof (struct minimal_symbol));
|
||
|
||
/* Walk through the list of minimal symbol bunches, adding each symbol
|
||
to the new contiguous array of symbols. Note that we start with the
|
||
current, possibly partially filled bunch (thus we use the current
|
||
msym_bunch_index for the first bunch we copy over), and thereafter
|
||
each bunch is full. */
|
||
|
||
mcount = m_objfile->per_bfd->minimal_symbol_count;
|
||
|
||
for (bunch = m_msym_bunch; bunch != NULL; bunch = bunch->next)
|
||
{
|
||
memcpy (&msymbols[mcount], &bunch->contents[0],
|
||
m_msym_bunch_index * sizeof (struct minimal_symbol));
|
||
mcount += m_msym_bunch_index;
|
||
m_msym_bunch_index = BUNCH_SIZE;
|
||
}
|
||
|
||
/* Sort the minimal symbols by address. */
|
||
|
||
qsort (msymbols, mcount, sizeof (struct minimal_symbol),
|
||
compare_minimal_symbols);
|
||
|
||
/* Compact out any duplicates, and free up whatever space we are
|
||
no longer using. */
|
||
|
||
mcount = compact_minimal_symbols (msymbols, mcount, m_objfile);
|
||
msym_holder.reset (XRESIZEVEC (struct minimal_symbol,
|
||
msym_holder.release (),
|
||
mcount));
|
||
|
||
/* Attach the minimal symbol table to the specified objfile.
|
||
The strings themselves are also located in the storage_obstack
|
||
of this objfile. */
|
||
|
||
m_objfile->per_bfd->minimal_symbol_count = mcount;
|
||
m_objfile->per_bfd->msymbols = std::move (msym_holder);
|
||
|
||
build_minimal_symbol_hash_tables (m_objfile);
|
||
}
|
||
}
|
||
|
||
/* Check if PC is in a shared library trampoline code stub.
|
||
Return minimal symbol for the trampoline entry or NULL if PC is not
|
||
in a trampoline code stub. */
|
||
|
||
static struct minimal_symbol *
|
||
lookup_solib_trampoline_symbol_by_pc (CORE_ADDR pc)
|
||
{
|
||
bound_minimal_symbol msymbol
|
||
= lookup_minimal_symbol_by_pc_section (pc, NULL,
|
||
lookup_msym_prefer::TRAMPOLINE);
|
||
|
||
if (msymbol.minsym != NULL
|
||
&& MSYMBOL_TYPE (msymbol.minsym) == mst_solib_trampoline)
|
||
return msymbol.minsym;
|
||
return NULL;
|
||
}
|
||
|
||
/* If PC is in a shared library trampoline code stub, return the
|
||
address of the `real' function belonging to the stub.
|
||
Return 0 if PC is not in a trampoline code stub or if the real
|
||
function is not found in the minimal symbol table.
|
||
|
||
We may fail to find the right function if a function with the
|
||
same name is defined in more than one shared library, but this
|
||
is considered bad programming style. We could return 0 if we find
|
||
a duplicate function in case this matters someday. */
|
||
|
||
CORE_ADDR
|
||
find_solib_trampoline_target (struct frame_info *frame, CORE_ADDR pc)
|
||
{
|
||
struct minimal_symbol *tsymbol = lookup_solib_trampoline_symbol_by_pc (pc);
|
||
|
||
if (tsymbol != NULL)
|
||
{
|
||
for (objfile *objfile : current_program_space->objfiles ())
|
||
{
|
||
for (minimal_symbol *msymbol : objfile->msymbols ())
|
||
{
|
||
/* Also handle minimal symbols pointing to function
|
||
descriptors. */
|
||
if ((MSYMBOL_TYPE (msymbol) == mst_text
|
||
|| MSYMBOL_TYPE (msymbol) == mst_text_gnu_ifunc
|
||
|| MSYMBOL_TYPE (msymbol) == mst_data
|
||
|| MSYMBOL_TYPE (msymbol) == mst_data_gnu_ifunc)
|
||
&& strcmp (MSYMBOL_LINKAGE_NAME (msymbol),
|
||
MSYMBOL_LINKAGE_NAME (tsymbol)) == 0)
|
||
{
|
||
CORE_ADDR func;
|
||
|
||
/* Ignore data symbols that are not function
|
||
descriptors. */
|
||
if (msymbol_is_function (objfile, msymbol, &func))
|
||
return func;
|
||
}
|
||
}
|
||
}
|
||
}
|
||
return 0;
|
||
}
|
||
|
||
/* See minsyms.h. */
|
||
|
||
CORE_ADDR
|
||
minimal_symbol_upper_bound (struct bound_minimal_symbol minsym)
|
||
{
|
||
short section;
|
||
struct obj_section *obj_section;
|
||
CORE_ADDR result;
|
||
struct minimal_symbol *iter, *msymbol;
|
||
|
||
gdb_assert (minsym.minsym != NULL);
|
||
|
||
/* If the minimal symbol has a size, use it. Otherwise use the
|
||
lesser of the next minimal symbol in the same section, or the end
|
||
of the section, as the end of the function. */
|
||
|
||
if (MSYMBOL_SIZE (minsym.minsym) != 0)
|
||
return BMSYMBOL_VALUE_ADDRESS (minsym) + MSYMBOL_SIZE (minsym.minsym);
|
||
|
||
/* Step over other symbols at this same address, and symbols in
|
||
other sections, to find the next symbol in this section with a
|
||
different address. */
|
||
|
||
struct minimal_symbol *past_the_end
|
||
= (minsym.objfile->per_bfd->msymbols.get ()
|
||
+ minsym.objfile->per_bfd->minimal_symbol_count);
|
||
msymbol = minsym.minsym;
|
||
section = MSYMBOL_SECTION (msymbol);
|
||
for (iter = msymbol + 1; iter != past_the_end; ++iter)
|
||
{
|
||
if ((MSYMBOL_VALUE_RAW_ADDRESS (iter)
|
||
!= MSYMBOL_VALUE_RAW_ADDRESS (msymbol))
|
||
&& MSYMBOL_SECTION (iter) == section)
|
||
break;
|
||
}
|
||
|
||
obj_section = MSYMBOL_OBJ_SECTION (minsym.objfile, minsym.minsym);
|
||
if (iter != past_the_end
|
||
&& (MSYMBOL_VALUE_ADDRESS (minsym.objfile, iter)
|
||
< obj_section_endaddr (obj_section)))
|
||
result = MSYMBOL_VALUE_ADDRESS (minsym.objfile, iter);
|
||
else
|
||
/* We got the start address from the last msymbol in the objfile.
|
||
So the end address is the end of the section. */
|
||
result = obj_section_endaddr (obj_section);
|
||
|
||
return result;
|
||
}
|