mirror/binutils-gdb
2
0
Fork 0
mirror of https://sourceware.org/git/binutils-gdb.git synced 2024-12-21 04:42:53 +08:00
Code Issues Packages Projects Releases Wiki Activity
3e00d44feb
binutils-gdb/ld/testsuite/ld-mips-elf/unaligned-jalx-addend-mips16-1.d
Maciej W. Rozycki ebf0b03c70 LD: vfinfo: Make clever formatters consistent WRT function name reporting 
Remove an inconsistency in linker error message processing causing that
it depends on the ability to infer the name of the originating source
file whether or not the name of the offending function is repeated by
clever formatters for each issue reported within the function.

Taking the `ld/testsuite/ld-powerpc/tocopt7.s' test case source as an
example and the `powerpc-linux' target we have:

$ as -gdwarf2 -o tocopt.o -a64 tocopt.s
$ ld -o tocopt -melf64ppc tocopt.o
tocopt.o: In function `_start':
tocopt.s:35:(.text+0x14): toc optimization is not supported for 0x3fa00000 instruction.
tocopt.s:49:(.text+0x34): toc optimization is not supported for 0x3fa00000 instruction.
$

vs:

$ as -o tocopt.o -a64 tocopt.s
$ ld -o tocopt -melf64ppc tocopt.o
tocopt.o: In function `_start':
(.text+0x14): toc optimization is not supported for 0x3fa00000 instruction.
tocopt.o: In function `_start':
(.text+0x34): toc optimization is not supported for 0x3fa00000 instruction.
$

Similarly with the `mips-linux' target and this source:

$ cat jal-global-multi-overflow.s
	.text
	.set	noreorder
	.space	0x2000

	.align	4
	.globl	foo
	.ent	foo
foo:
	jal	bar
	 nor	$0, $0
	jal	bar
	 nor	$0, $0
	.end	foo

	.space	0x1ff0

	.align	4
	.globl	bar
	.ent	bar
bar:
	jal	foo
	 nor	$0, $0
	jal	foo
	 nor	$0, $0
	.end	bar
$ as -o jal-global-multi-overflow.o jal-global-multi-overflow.s
$ ld -Ttext 0x1fffd000 -e foo -o jal-global-multi-overflow jal-global-multi-overflow.o
jal-global-multi-overflow.o: In function `foo':
(.text+0x2000): relocation truncated to fit: R_MIPS_26 against `bar'
jal-global-multi-overflow.o: In function `foo':
(.text+0x2008): relocation truncated to fit: R_MIPS_26 against `bar'
jal-global-multi-overflow.o: In function `bar':
(.text+0x4000): relocation truncated to fit: R_MIPS_26 against `foo'
jal-global-multi-overflow.o: In function `bar':
(.text+0x4008): relocation truncated to fit: R_MIPS_26 against `foo'
$

Not only this is inconsistent, but it causes output clutter as well with
redundant information.

The cause for this is a check in `vfinfo' the intent of which is to
print the function heading whenever (among others) the name of the
source file has changed, which however does not take into account a
situation where the name couldn't have been established both now and
previously.

Adjust the check then for this situation, yielding:

$ as -o tocopt.o -a64 tocopt.s
$ ld -o tocopt -melf64ppc tocopt.o
tocopt.o: In function `_start':
(.text+0x14): toc optimization is not supported for 0x3fa00000 instruction.
(.text+0x34): toc optimization is not supported for 0x3fa00000 instruction.
$

and:

$ as -o jal-global-multi-overflow.o jal-global-multi-overflow.s
$ ld -Ttext 0x1fffd000 -e foo -o jal-global-multi-overflow jal-global-multi-overflow.o
jal-global-multi-overflow.o: In function `foo':
(.text+0x2000): relocation truncated to fit: R_MIPS_26 against `bar'
(.text+0x2008): relocation truncated to fit: R_MIPS_26 against `bar'
jal-global-multi-overflow.o: In function `bar':
(.text+0x4000): relocation truncated to fit: R_MIPS_26 against `foo'
(.text+0x4008): relocation truncated to fit: R_MIPS_26 against `foo'
$

respectively instead.  Adjust the test suite accordingly.

	ld/
	* ldmisc.c (vfinfo): Don't print the function name again either
	if no source file name has been found both now and previously.
	* testsuite/ld-cris/tls-err-20x.d: Adjust accordingly.
	* testsuite/ld-mips-elf/mode-change-error-1.d: Likewise.
	* testsuite/ld-mips-elf/unaligned-branch.d: Likewise.
	* testsuite/ld-mips-elf/unaligned-branch-mips16.d: Likewise.
	* testsuite/ld-mips-elf/unaligned-branch-micromips.d: Likewise.
	* testsuite/ld-mips-elf/unaligned-branch-r6-1.d: Likewise.
	* testsuite/ld-mips-elf/unaligned-branch-2.d: Likewise.
	* testsuite/ld-mips-elf/unaligned-branch-r6-2.d: Likewise.
	* testsuite/ld-mips-elf/unaligned-branch-ignore-2.d: Likewise.
	* testsuite/ld-mips-elf/unaligned-branch-ignore-mips16.d:
	Likewise.
	* testsuite/ld-mips-elf/unaligned-branch-ignore-micromips.d:
	Likewise.
	* testsuite/ld-mips-elf/unaligned-branch-ignore-r6-1.d:
	Likewise.
	* testsuite/ld-mips-elf/unaligned-jalx-addend-1.d: Likewise.
	* testsuite/ld-mips-elf/unaligned-jalx-addend-mips16-1.d:
	Likewise.
	* testsuite/ld-mips-elf/unaligned-jalx-addend-micromips-1.d:
	Likewise.
	* testsuite/ld-mips-elf/unaligned-jalx-addend-3.d: Likewise.
	* testsuite/ld-mips-elf/unaligned-jump.d: Likewise.
	* testsuite/ld-mips-elf/unaligned-jump-mips16.d: Likewise.
	* testsuite/ld-mips-elf/unaligned-jump-micromips.d: Likewise.
	* testsuite/ld-mips-elf/unaligned-lwpc-1.d: Likewise.
	* testsuite/ld-mips-elf/unaligned-ldpc-1.d: Likewise.
	* testsuite/ld-powerpc/tocopt.out: Likewise.
	* testsuite/ld-powerpc/tocopt7.out: Likewise.
2017-02-15 13:41:51 +00:00

20 lines
1.4 KiB
Makefile
Raw Blame History

#name: MIPS16 JALX to unaligned symbol with addend 1
#source: unaligned-jalx-addend-1.s -mips16
#source: unaligned-insn.s
#as: -EB -n32 -march=from-abi
#ld: -EB -Ttext 0x1c000000 -e 0x1c000000
#objdump: -dr --prefix-addresses --show-raw-insn
#error: \A[^\n]*: In function `foo':\n
#error: \(\.text\+0x[0-9a-f]+\): Cannot convert a jump to JALX for a non-word-aligned address\n
#error: \(\.text\+0x[0-9a-f]+\): Cannot convert a jump to JALX for a non-word-aligned address\n
#error: \(\.text\+0x[0-9a-f]+\): Cannot convert a jump to JALX for a non-word-aligned address\n
#error: \(\.text\+0x[0-9a-f]+\): Cannot convert a jump to JALX for a non-word-aligned address\n
#error: \(\.text\+0x[0-9a-f]+\): Cannot convert a jump to JALX for a non-word-aligned address\n
#error: \(\.text\+0x[0-9a-f]+\): Cannot convert a jump to JALX for a non-word-aligned address\n
#error: \(\.text\+0x[0-9a-f]+\): Cannot convert a jump to JALX for a non-word-aligned address\n
#error: \(\.text\+0x[0-9a-f]+\): Cannot convert a jump to JALX for a non-word-aligned address\n
#error: \(\.text\+0x[0-9a-f]+\): Cannot convert a jump to JALX for a non-word-aligned address\n
#error: \(\.text\+0x[0-9a-f]+\): Cannot convert a jump to JALX for a non-word-aligned address\n
#error: \(\.text\+0x[0-9a-f]+\): Cannot convert a jump to JALX for a non-word-aligned address\n
#error: \(\.text\+0x[0-9a-f]+\): Cannot convert a jump to JALX for a non-word-aligned address\Z
Reference in New Issue View Git Blame Copy Permalink