binutils-gdb/gas/doc/local.mk
Mike Frysinger 9a84a44d5d gas: drop old cygnus install hack
This was needed when gas was using the automake cygnus option, but
this was removed years ago by Simon in d0ac1c4488
("Bump to autoconf 2.69 and automake 1.15.1").  So delete it here.
The info pages are already & still installed by default w/out it.
2022-01-24 19:58:33 -05:00

133 lines
3.6 KiB
Makefile

## Process this file with automake to generate Makefile.in
#
# Copyright (C) 2012-2022 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING3. If not see
# <http://www.gnu.org/licenses/>.
#
# What version of the manual you want; "all" includes everything
CONFIG=all
# Options to extract the man page from as.texi
MANCONF = -Dman
TEXI2POD = perl $(BASEDIR)/etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
POD2MAN = pod2man --center="GNU Development Tools" \
--release="binutils-$(VERSION)" --section=1
man_MANS = %D%/as.1
info_TEXINFOS = %D%/as.texi
%C%_as_TEXINFOS = %D%/asconfig.texi $(CPU_DOCS)
AM_MAKEINFOFLAGS = -I "$(srcdir)/%D%" -I %D% -I "$(srcdir)/../libiberty" \
-I "$(srcdir)/../bfd/doc" -I ../bfd/doc \
--no-split
TEXI2DVI = texi2dvi -I "$(srcdir)/%D%" -I %D% -I "$(srcdir)/../libiberty" \
-I "$(srcdir)/../bfd/doc" -I ../bfd/doc
%D%/asconfig.texi: %D%/$(CONFIG).texi %D%/$(am__dirstamp)
$(AM_V_at)rm -f %D%/asconfig.texi
$(AM_V_GEN)cp $(srcdir)/%D%/$(CONFIG).texi %D%/asconfig.texi
$(AM_V_at)chmod u+w %D%/asconfig.texi
CPU_DOCS = \
%D%/c-aarch64.texi \
%D%/c-alpha.texi \
%D%/c-arc.texi \
%D%/c-arm.texi \
%D%/c-avr.texi \
%D%/c-bfin.texi \
%D%/c-bpf.texi \
%D%/c-cr16.texi \
%D%/c-cris.texi \
%D%/c-csky.texi \
%D%/c-d10v.texi \
%D%/c-epiphany.texi \
%D%/c-h8300.texi \
%D%/c-hppa.texi \
%D%/c-i386.texi \
%D%/c-ip2k.texi \
%D%/c-lm32.texi \
%D%/c-m32c.texi \
%D%/c-m32r.texi \
%D%/c-m68hc11.texi \
%D%/c-m68k.texi \
%D%/c-s12z.texi \
%D%/c-metag.texi \
%D%/c-microblaze.texi \
%D%/c-mips.texi \
%D%/c-mmix.texi \
%D%/c-mt.texi \
%D%/c-msp430.texi \
%D%/c-nios2.texi \
%D%/c-nds32.texi \
%D%/c-ns32k.texi \
%D%/c-or1k.texi \
%D%/c-pdp11.texi \
%D%/c-pj.texi \
%D%/c-ppc.texi \
%D%/c-pru.texi \
%D%/c-rl78.texi \
%D%/c-riscv.texi \
%D%/c-rx.texi \
%D%/c-s390.texi \
%D%/c-score.texi \
%D%/c-sh.texi \
%D%/c-sparc.texi \
%D%/c-tic54x.texi \
%D%/c-tic6x.texi \
%D%/c-tilegx.texi \
%D%/c-tilepro.texi \
%D%/c-v850.texi \
%D%/c-vax.texi \
%D%/c-visium.texi \
%D%/c-xgate.texi \
%D%/c-xstormy16.texi \
%D%/c-xtensa.texi \
%D%/c-z80.texi \
%D%/c-z8k.texi
# This one isn't ready for prime time yet. Not even a little bit.
noinst_TEXINFOS = %D%/internals.texi
MAINTAINERCLEANFILES += %D%/asconfig.texi
# Maintenance
# We need it for the taz target in ../Makefile.in.
info-local: $(MANS)
# Build the man page from the texinfo file
# The sed command removes the no-adjust Nroff command so that
# the man output looks standard.
%D%/as.1: $(srcdir)/%D%/as.texi %D%/asconfig.texi $(CPU_DOCS) %D%/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) < $(srcdir)/%D%/as.texi > %D%/as.pod
$(AM_V_at)-($(POD2MAN) %D%/as.pod | \
sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || \
(rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f %D%/as.pod
html-local: %D%/as/index.html
%D%/as/index.html: %D%/as.texi $(%C%_as_TEXINFOS) %D%/$(am__dirstamp)
$(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
--split=node -I$(srcdir)/%D% -o %D%/as $(srcdir)/%D%/as.texi
MAINTAINERCLEANFILES += %D%/as.info