Alan Modra 348fe36b1d Remove perror from ld_assemble, ld_compile and ld_nm ... ERROR should really be reserved for errors in the testsuite framework, not just normal errors from the tools under test. Removing use of perror has been suggested before but without action, over concerns that some test failures might be missed. This patch removes uses of perror in ld_assemble, ld_compile and ld_nm, and updates numerous places that ignored the result of these functions by inappropriately returning an "unresolved" test status. Net result over my large set of targets look good, in some cases improving the diagnostics, eg: i386-msdos -ERROR: tmpdir/script: nm failed i386-msdos -ERROR: tmpdir/script: nm failed i386-msdos -ERROR: tmpdir/script: nm failed i386-msdos -ERROR: tmpdir/script: nm failed i386-msdos +FAIL: script i386-msdos +FAIL: MRI script i386-msdos +FAIL: MEMORY i386-msdos +FAIL: MEMORY with symbols * testsuite/lib/ld-lib.exp (default_ld_compile): Don't perror on a compiler error. (default_ld_assemble): Similarly for an assembler error. (default_ld_nm): Similarly for an nm error. (run_ld_link_tests): Report ld_assemble errors as a fail. (check_as_cfi): Remove now unnecessary perror substitution. * testsuite/ld-elf/exclude.exp: Report ld_nm error return as test fails rather then unresolved. * testsuite/ld-gc/gc.exp: Likewise. * testsuite/ld-scripts/alignof.exp: Likewise. * testsuite/ld-scripts/defined.exp: Likewise. * testsuite/ld-scripts/script.exp: Likewise. * testsuite/ld-scripts/sizeof.exp: Likewise. * testsuite/ld-selective/selective.exp: Likewise. * testsuite/ld-scripts/extern.exp: Likewise. Return on ld_link failure. * testsuite/ld-elfweak/elfweak.exp: Report compiler errors as test unresolved. * testsuite/ld-fastcall/fastcall.exp: Report assember errors as test fails. * testsuite/ld-i386/i386.exp (iamcu_tests): Likewise. * testsuite/ld-ia64/line.exp: Likewise. * testsuite/ld-mep/mep.exp: Likewise. * testsuite/ld-mips-elf/mips-elf-flags.exp: Likewise. * testsuite/ld-nios2/nios2.exp: Likewise. * testsuite/ld-scripts/alignof.exp: Likewise. * testsuite/ld-x86-64/line.exp: Likewise. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-scripts/log2.exp: Formatting. * testsuite/ld-tic6x/tic6x.exp: Report ld_link errors as a test fail.		2020-06-20 15:53:37 +09:30
..
32bit.s
64bit.s
abs-k1om.d
abs-l1om.d
abs.d
align-branch-1.d	Fix ld-x86-64/align-branch-1 test failure on --target=x86_64-elf	2020-01-18 14:42:24 -08:00
align-branch-1.s	i386: Add tests for -malign-branch-boundary and -malign-branch	2019-12-12 12:03:45 -08:00
apic.d
apic.s
bnd-branch-1-now.d	x86: Add explicit -mx86-used-note=[yes|no] to tests	2018-08-31 04:35:57 -07:00
bnd-branch-1.d
bnd-branch-1.s
bnd-ifunc-1-now.d	x86: Add explicit -mx86-used-note=[yes|no] to tests	2018-08-31 04:35:57 -07:00
bnd-ifunc-1.d
bnd-ifunc-1.s
bnd-ifunc-2-now.d	x86: Add explicit -mx86-used-note=[yes|no] to tests	2018-08-31 04:35:57 -07:00
bnd-ifunc-2.d	x86: Add explicit -mx86-used-note=[yes|no] to tests	2018-08-31 04:35:57 -07:00
bnd-ifunc-2.s
bnd-plt-1-now.d	x86: Add explicit -mx86-used-note=[yes|no] to tests	2018-08-31 04:35:57 -07:00
bnd-plt-1.d	x86: Add explicit -mx86-used-note=[yes|no] to tests	2018-08-31 04:35:57 -07:00
call1.s
call1a.d
call1b.d
call1c.d
call1d.d
call1e.d
call1f.d
call1g.d
call1h.d
call1i.d
compressed1.d
compressed1.s
copyreloc-lib.c
copyreloc-main1.rd
copyreloc-main2.rd
copyreloc-main.out
copyreloc-main.S
discarded1.d
discarded1.s
discarded1.t
dummy.s
dwarfreloc1.s
dwarfreloc2.s
dwarfreloc.exp	Update year range in copyright notice of binutils files	2020-01-01 18:42:54 +10:30
dwarfreloc.rd
export-class.exp	Update year range in copyright notice of binutils files	2020-01-01 18:42:54 +10:30
foo.s
gotpcrel1.dd
gotpcrel1.out
gotpcrel1a.S
gotpcrel1b.c
gotpcrel1c.c
gotpcrel1d.S
gotplt1.d
gotplt1.s
hidden1.d
hidden1.s
hidden2.d
hidden2.s
hidden3.d
hidden3.s
hidden4.d
hidden4.s
hidden5.d
hidden5.s
ia32-1.d
ia32-2.d
ia32-3.d
ibt-plt-1-x32.d	elf: Add PT_GNU_PROPERTY segment type	2018-12-14 04:55:34 -08:00
ibt-plt-1.d	elf: Add PT_GNU_PROPERTY segment type	2018-12-14 04:55:34 -08:00
ibt-plt-1.s
ibt-plt-2.s
ibt-plt-2a-x32.d	x86: Remove empty X86_FEATURE_1_AND property	2018-08-17 03:54:16 -07:00
ibt-plt-2a.d	x86: Remove empty X86_FEATURE_1_AND property	2018-08-17 03:54:16 -07:00
ibt-plt-2b-x32.d	x86: Remove empty X86_FEATURE_1_AND property	2018-08-17 03:54:16 -07:00
ibt-plt-2b.d	x86: Remove empty X86_FEATURE_1_AND property	2018-08-17 03:54:16 -07:00
ibt-plt-2c-x32.d	elf: Add PT_GNU_PROPERTY segment type	2018-12-14 04:55:34 -08:00
ibt-plt-2c.d	elf: Add PT_GNU_PROPERTY segment type	2018-12-14 04:55:34 -08:00
ibt-plt-2d-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
ibt-plt-2d.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
ibt-plt-3.s
ibt-plt-3a-x32.d
ibt-plt-3a.d
ibt-plt-3b-x32.d
ibt-plt-3b.d
ibt-plt-3c-x32.d	elf: Add PT_GNU_PROPERTY segment type	2018-12-14 04:55:34 -08:00
ibt-plt-3c.d	elf: Add PT_GNU_PROPERTY segment type	2018-12-14 04:55:34 -08:00
ibt-plt-3d-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
ibt-plt-3d.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
ifunc-textrel-1.s	IFUNC: Update IFUNC resolver check with DT_TEXTREL	2020-06-09 06:57:25 -07:00
ifunc-textrel-1a.d	IFUNC: Update IFUNC resolver check with DT_TEXTREL	2020-06-09 06:57:25 -07:00
ifunc-textrel-1b.d	IFUNC: Update IFUNC resolver check with DT_TEXTREL	2020-06-09 06:57:25 -07:00
ifunc-textrel-2.s	IFUNC: Update IFUNC resolver check with DT_TEXTREL	2020-06-09 06:57:25 -07:00
ifunc-textrel-2a.d	IFUNC: Update IFUNC resolver check with DT_TEXTREL	2020-06-09 06:57:25 -07:00
ifunc-textrel-2b.d	IFUNC: Update IFUNC resolver check with DT_TEXTREL	2020-06-09 06:57:25 -07:00
ilp32-1.d
ilp32-2.d
ilp32-3.d
ilp32-4-nacl.d
ilp32-4.d
ilp32-4.s
ilp32-5.d
ilp32-5.s
ilp32-6.d
ilp32-6.s
ilp32-7.d
ilp32-7.s
ilp32-8.d
ilp32-8.s
ilp32-9.d
ilp32-9.s
ilp32-10.d
ilp32-10.s
ilp32-11.d
ilp32-11.s
incompatible.l
largecomm-1.s
largecomm-1a.d
largecomm-1b.d
largecomm-1c.d
largecomm-1d.d
largecomm-1e.d
largecomm-1f.d
lea1.s
lea1a.d
lea1b.d
lea1c.d
lea1d.d
lea1e.d
lea1f.d
lea1g.d
lea1h.d
lea1i.d
lea1j.d
lea1k.d
lea1l.d
libno-plt-1b.dd
libno-plt-1b.rd
line.exp	Remove perror from ld_assemble, ld_compile and ld_nm	2020-06-20 15:53:37 +09:30
load1.s
load1a-nacl.d
load1a.d
load1b-nacl.d
load1b.d
load1c-nacl.d
load1c.d
load1d-nacl.d
load1d.d
load2.d	Prefer object over notype symbols when disassembling	2019-12-17 20:43:00 +10:30
load2.map
load2.s
lp64-1.d
lp64-2.d
lp64-3.d
mixed1a.s
mixed1b.s
mixed2a.s
mixed2b.s
mov1.s
mov1a.d
mov1b.d
mov1c.d
mov1d.d
mov2.s
mov2a.d
mov2b.d
mov2c.d
mov2d.d
mpx1.out
mpx1a.c
mpx1a.rd
mpx1b.c
mpx1c.c
mpx1c.rd
mpx2.out
mpx2a.c
mpx2a.rd
mpx2b.c
mpx2c.c
mpx2c.rd
mpx3.dd
mpx3a.s
mpx3b.s
mpx3n.dd
mpx4.dd
mpx4a.s
mpx4b.s
mpx4n.dd
mpx.exp	tcl global directive outside proc body does nothing (ld)	2020-06-04 16:11:19 +09:30
no-plt-1a.dd
no-plt-1a.rd
no-plt-1b.dd
no-plt-1b.rd
no-plt-1c.dd
no-plt-1c.rd
no-plt-1d.dd
no-plt-1d.rd
no-plt-1e.dd
no-plt-1e.nd
no-plt-1e.rd
no-plt-1f.dd
no-plt-1f.rd
no-plt-1g.dd
no-plt-1g.rd
no-plt-check1.S
no-plt-extern1.S
no-plt-func1.c
no-plt-main1.c
no-plt.exp	tcl global directive outside proc body does nothing (ld)	2020-06-04 16:11:19 +09:30
nogot1.d
nogot1.s
nogot2.d
nogot2.s
pass.c
pass.out
pcrel8.d
pcrel16.d
pic1.d
pic1.s
pie1.d	ld: Pass -z notext to linker for tests with DT_TEXTREL	2020-05-25 04:54:50 -07:00
pie1.s
pie2.d	x86: Suggest -fPIE when not building shared object	2019-04-17 10:25:28 -07:00
pie2.s
pie3-nacl.d
pie3.d
pie3.s
plt2.dd
plt2.rd
plt2.s
plt-lib.c
plt-main1.c
plt-main1.rd
plt-main2.c
plt-main2.rd
plt-main3.c
plt-main3.rd
plt-main4.c
plt-main4.rd
plt-main5.c
plt-main-bnd-now.rd
plt-main-bnd.dd
plt-main-ibt-now.rd
plt-main-ibt-x32.dd	ld: Pass -fno-sanitize=all to tests with linker	2020-06-03 06:57:19 -07:00
plt-main-ibt.dd	ld: Pass -fno-sanitize=all to tests with linker	2020-06-03 06:57:19 -07:00
plt-main.out
plt-main.rd
plt-nacl.pd
plt-pic.s
plt.pd
plt.s
pltgot-1.d
pltgot-1.s
pltgot-2.d
pltlib.s
pr12570a.d
pr12570a.s
pr12570b.d
pr12570b.s
pr12718.d
pr12718.s
pr12921.d
pr12921.s
pr13082-1.s
pr13082-1a.d
pr13082-1b.d
pr13082-2.s
pr13082-2a.d
pr13082-2b.d
pr13082-3.s
pr13082-3a.d
pr13082-3b.d
pr13082-3c.d
pr13082-3d.d
pr13082-4.s
pr13082-4a.d
pr13082-4b.d
pr13082-5.s
pr13082-5a.d
pr13082-5b.d
pr13082-6.s
pr13082-6a.d
pr13082-6b.d
pr13947.d
pr13947.s
pr14207.d
pr14207.s
pr14215.d
pr14215.s
pr17306a.s
pr17306b.s
pr17618.d
pr17618.s
pr17689.out
pr17689.rd
pr17689a.c
pr17689b.S
pr17689now.rd
pr17709-nacl.rd
pr17709.rd
pr17709a.s
pr17709b.s
pr17827.rd
pr17935-1.d
pr17935-1.s
pr17935-2.d
pr17935-2.s
pr18160.d
pr18160.s
pr18160.t
pr18176.d
pr18176.s
pr18176.t
pr18591.d
pr18591.s
pr18801.s
pr18801a.d	IFUNC: Update IFUNC resolver check with DT_TEXTREL	2020-06-09 06:57:25 -07:00
pr18801b.d	IFUNC: Update IFUNC resolver check with DT_TEXTREL	2020-06-09 06:57:25 -07:00
pr18815.d
pr18815.s
pr18900.out
pr18900a.c
pr18900a.rd
pr18900b.c
pr18900b.rd
pr18900c.c
pr19013-nacl.d
pr19013-x32.d
pr19013.d
pr19013.s
pr19031.out
pr19031a.c
pr19031b.S
pr19031c.c
pr19162.d
pr19162a.s
pr19162b.s
pr19175.d
pr19175.s
pr19175.t
pr19319.dd
pr19319a.S
pr19319b.S
pr19539.s
pr19539.t
pr19539a.d	ld: Pass -z notext to linker for tests with DT_TEXTREL	2020-05-25 04:54:50 -07:00
pr19539b.d	ld: Pass -z notext to linker for tests with DT_TEXTREL	2020-05-25 04:54:50 -07:00
pr19609-1.s
pr19609-1a.d
pr19609-1b.d
pr19609-1c.d
pr19609-1d.d
pr19609-1e.d
pr19609-1f.d
pr19609-1g.d
pr19609-1h.d
pr19609-1i.d
pr19609-1j.d
pr19609-1k.d
pr19609-1l.d
pr19609-1m.d
pr19609-2.s
pr19609-2a.d
pr19609-2b.d
pr19609-2c.d
pr19609-2d.d
pr19609-3.s
pr19609-3a.d
pr19609-3b.d
pr19609-4.s
pr19609-4a.d
pr19609-4b.d
pr19609-4c.d
pr19609-4d.d
pr19609-4e.d
pr19609-5.s
pr19609-5a.d
pr19609-5b.d
pr19609-5c.d
pr19609-5d.d
pr19609-5e.d
pr19609-6.s
pr19609-6a.d	x86: Only allow S + A relocations against absolute symbol	2020-04-01 14:31:47 -07:00
pr19609-6b.d
pr19609-6c.d
pr19609-6d.d
pr19609-7.s
pr19609-7a.d
pr19609-7b.d
pr19609-7c.d
pr19609-7d.d
pr19615.d
pr19615.s
pr19636-1.s
pr19636-1a.d
pr19636-1b.d
pr19636-1c.d
pr19636-1d.d	ld: Pass -z notext to linker for tests with DT_TEXTREL	2020-05-25 04:54:50 -07:00
pr19636-1e.d	ld: Pass -z notext to linker for tests with DT_TEXTREL	2020-05-25 04:54:50 -07:00
pr19636-1f.d
pr19636-1g.d
pr19636-1h.d
pr19636-1i.d
pr19636-1j.d
pr19636-2.s
pr19636-2a.d
pr19636-2b.d
pr19636-2c.d
pr19636-2d-nacl.d
pr19636-2d.d
pr19636-2e.d
pr19636-2f.d
pr19636-2g.d
pr19636-2h.d
pr19636-2i.d
pr19636-2j.d
pr19636-2k.d
pr19636-2l.d
pr19636-2m.d
pr19636-3.s
pr19636-3a.d
pr19636-3b.d
pr19636-3c.d
pr19636-3d.d
pr19645.d
pr19645.s
pr19704.out
pr19704a.c
pr19704b.c
pr19719.d	x86: Suggest -fPIE when not building shared object	2019-04-17 10:25:28 -07:00
pr19719.s
pr19784a.c
pr19784b.c
pr19784c.c
pr19807-1.s
pr19807-1a.d	ld: Pass -z notext to linker for tests with DT_TEXTREL	2020-05-25 04:54:50 -07:00
pr19807-1b.d	ld: Pass -z notext to linker for tests with DT_TEXTREL	2020-05-25 04:54:50 -07:00
pr19807-2.s
pr19807-2a.d	x86: Suggest -fPIE when not building shared object	2019-04-17 10:25:28 -07:00
pr19807-2b.d	ld: Pass -z notext to linker for tests with DT_TEXTREL	2020-05-25 04:54:50 -07:00
pr19807-2c.d	ld: Pass -z notext to linker for tests with DT_TEXTREL	2020-05-25 04:54:50 -07:00
pr19807-2d.d	ld: Pass -z notext to linker for tests with DT_TEXTREL	2020-05-25 04:54:50 -07:00
pr19807-2e.d	ld: Pass -z notext to linker for tests with DT_TEXTREL	2020-05-25 04:54:50 -07:00
pr19827-nacl.rd
pr19827.rd
pr19827a.S
pr19827b.S
pr19939.s
pr19939a.d
pr19939b.d	ld: Pass -z notext to linker for tests with DT_TEXTREL	2020-05-25 04:54:50 -07:00
pr19969.d	x86: Suggest -fPIE when not building shared object	2019-04-17 10:25:28 -07:00
pr19969a.S
pr19969b.S
pr20093-1.d
pr20093-1.s
pr20093-2.d
pr20093-2.s
pr20253-1.s
pr20253-1a.d
pr20253-1b.d
pr20253-1c.d
pr20253-1d.d
pr20253-1e.d
pr20253-1f.d
pr20253-1g.d
pr20253-1h.d
pr20253-1i.d
pr20253-1j.d
pr20253-1k.d
pr20253-1l.d
pr20253-2a.c
pr20253-2b.S
pr20253-2c.S
pr20253-2d.S
pr20253-3.d
pr20253-3.s
pr20253-4.s
pr20253-4a.d
pr20253-4b.d
pr20253-4c.d
pr20253-4d.d
pr20253-4e.d
pr20253-4f.d
pr20253-5.s
pr20253-5a.d
pr20253-5b.d
pr20550a.s
pr20550b.s
pr20800a.S
pr20800b.S
pr20830.s
pr20830a-now.d
pr20830a.d
pr20830b-now.d
pr20830b.d
pr21038a-now.d
pr21038a.d
pr21038a.s
pr21038b-now.d
pr21038b.d
pr21038b.s
pr21038c-now.d
pr21038c.d
pr21038c.s
pr21481a.c
pr21481b.S	ELF: Add support for unique section ID to assembler	2020-02-02 17:08:01 -08:00
pr21884-nacl.d
pr21884-nacl.t
pr21884.d
pr21884.t
pr21997-1a.err	x86: Suggest -fPIE when not building shared object	2019-04-17 10:25:28 -07:00
pr21997-1a.S
pr21997-1b.c
pr21997-1b.err	x86: Suggest -fPIE when not building shared object	2019-04-17 10:25:28 -07:00
pr21997-1c.c
pr22001-1a.c
pr22001-1a.err	x86: Suggest -fPIE when not building shared object	2019-04-17 10:25:28 -07:00
pr22001-1b.c
pr22001-1b.err	x86: Suggest -fPIE when not building shared object	2019-04-17 10:25:28 -07:00
pr22001-1c.c
pr22048.d
pr22048a.s
pr22048b.s
pr22064a.S
pr22064b.c
pr22071.d
pr22071.s
pr22115-1.s
pr22115-1a-x32.d
pr22115-1a.d
pr22115-1b-x32.d
pr22115-1b.d
pr22115-1c-x32.d
pr22115-1c.d
pr22115-1d-x32.d
pr22115-1d.d
pr22135.d
pr22135.s
pr22393-3a.c
pr22393-3a.rd
pr22393-3b.c
pr22393-3b.rd
pr22782.s
pr22782a.d
pr22782b.d
pr22791-1.err	x86: Suggest -fPIE when not building shared object	2019-04-17 10:25:28 -07:00
pr22791-1a.c
pr22791-1b.s
pr22791-2.rd
pr22791-2a.s
pr22791-2b.c
pr22791-2c.s
pr22842a.c
pr22842a.rd
pr22842b.rd
pr22842b.S
pr22929.d
pr22929.s
pr23189.d
pr23189.s
pr23189.t
pr23194.d
pr23194.map
pr23194.s
pr23324.s
pr23324a.d
pr23324b.d
pr23372a-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23372a.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23372a.s	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23372b-x32.d
pr23372b.d
pr23372b.s	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23372c-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23372c.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23372c.s	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23372d-x32.d	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23372d.d	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23372d.s	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23372e.s	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23372f.s	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23486a-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23486a.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23486a.s	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23486b-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23486b.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23486b.s	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23486c-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23486c.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23486c.s	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23486d-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23486d.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr23486d.s	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
pr23854.d	x86: Disable GOT relaxation with data prefix	2018-11-05 09:01:43 -08:00
pr23854.s	x86: Disable GOT relaxation with data prefix	2018-11-05 09:01:43 -08:00
pr23930-32.t	x86: Delay setting the iplt section alignment	2018-12-01 06:35:03 -08:00
pr23930-x32.d	x86: Delay setting the iplt section alignment	2018-12-01 06:35:03 -08:00
pr23930.d	x86: Delay setting the iplt section alignment	2018-12-01 06:35:03 -08:00
pr23930.t	x86: Delay setting the iplt section alignment	2018-12-01 06:35:03 -08:00
pr23930a.s	x86: Delay setting the iplt section alignment	2018-12-01 06:35:03 -08:00
pr23930b.s	x86: Delay setting the iplt section alignment	2018-12-01 06:35:03 -08:00
pr23997a.s	x86: Properly handle PLT expression in directive	2018-12-19 12:22:12 -08:00
pr23997b.c	x86: Properly handle PLT expression in directive	2018-12-19 12:22:12 -08:00
pr23997c.c	x86: Properly handle PLT expression in directive	2018-12-19 12:22:12 -08:00
pr24151a-x32.d	x86-64: Restore PIC check for PCREL reloc against protected symbol	2019-02-05 18:45:34 -08:00
pr24151a.d	x86-64: Restore PIC check for PCREL reloc against protected symbol	2019-02-05 18:45:34 -08:00
pr24151a.s	x86-64: Restore PIC check for PCREL reloc against protected symbol	2019-02-05 18:45:34 -08:00
pr24276.dso	x86-64: Skip protected check on symbol defined by linker	2019-02-27 11:53:27 -08:00
pr24276.warn	x86-64: Skip protected check on symbol defined by linker	2019-02-27 11:53:27 -08:00
pr24322a-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr24322a.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr24322a.s	x86: Properly set IBT and SHSTK properties for -z ibt/shstk	2019-03-13 14:38:29 +08:00
pr24322b-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr24322b.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr24322b.s	x86: Properly set IBT and SHSTK properties for -z ibt/shstk	2019-03-13 14:38:29 +08:00
pr24322c.s	x86: Properly set IBT and SHSTK properties for -z ibt/shstk	2019-03-13 14:38:29 +08:00
pr24458.s	x86: Also check x86 linker_def for non-shared definition	2019-04-17 09:08:46 -07:00
pr24458a-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr24458a.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr24458b-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr24458b.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr24458c-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr24458c.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
pr24721-x32.d	elf: Remove the property after reporting its removal	2019-06-24 11:08:57 -07:00
pr24721.d	elf: Remove the property after reporting its removal	2019-06-24 11:08:57 -07:00
pr24721.map	elf: Remove the property after reporting its removal	2019-06-24 11:08:57 -07:00
pr24721a.s	elf: Remove the property after reporting its removal	2019-06-24 11:08:57 -07:00
pr24721b.s	elf: Remove the property after reporting its removal	2019-06-24 11:08:57 -07:00
pr24905-x32.d	x86-64: Move PIC check for PC-relative relocations back	2019-08-16 14:25:58 -07:00
pr24905.d	x86-64: Move PIC check for PC-relative relocations back	2019-08-16 14:25:58 -07:00
pr24905.s	x86-64: Move PIC check for PC-relative relocations back	2019-08-16 14:25:58 -07:00
pr24905.t	x86-64: Move PIC check for PC-relative relocations back	2019-08-16 14:25:58 -07:00
pr25416-1.s	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-1a.d	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-1b.d	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-2.s	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-2a.d	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-2b.d	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-3.d	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-3.s	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-4.d	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-4.s	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-5a.c	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-5b.s	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-5c.s	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-5d.s	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr25416-5e.s	x86-64: Fix TLSDESC relaxation for x32	2020-01-20 07:01:07 -08:00
pr26018.d	ld: Add -Bsymbolic-functions tests	2020-05-23 20:56:31 -07:00
pr26018.s	ld: Add -Bsymbolic-functions tests	2020-05-23 20:56:31 -07:00
property-1.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-1a.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-2.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-2a.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-3.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-3a.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-4.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-4a.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-5.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-5a.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-6.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-6a.c
property-6b.c
property-6c.S
property-7.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-7a.r	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-no-copy.S
property-stack.S
property-unsorted-1.S
property-unsorted-2.S
property-x86-1.S	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
property-x86-2.S	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
property-x86-3-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-3.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-3.s	x86: Update GNU_PROPERTY_X86_XXX macros	2018-08-24 04:42:15 -07:00
property-x86-4a-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-4a.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-4a.s
property-x86-4b-x32.d
property-x86-4b.d
property-x86-4b.s
property-x86-5-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-5.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-5a.s	elf: Add PT_GNU_PROPERTY segment type	2018-12-14 04:55:34 -08:00
property-x86-5b.s	elf: Add PT_GNU_PROPERTY segment type	2018-12-14 04:55:34 -08:00
property-x86-cet1-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-cet1.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-cet2a-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-cet2a.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-cet2b-x32.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet2b.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet3a-x32.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet3a.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet3b-x32.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet3b.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet4a-x32.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet4a.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet4b-x32.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet4b.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet5a-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-cet5a.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-cet5b-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-cet5b.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-cet6-x32.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet6.d	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-cet.s	x86: Add -z cet-report=[none|warning|error]	2019-04-11 08:21:30 -07:00
property-x86-empty.s
property-x86-ibt1a-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt1a.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt1a.map	elf: Report property change when merging properties	2018-12-07 08:30:43 -08:00
property-x86-ibt1b-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt1b.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt2-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt2.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt3a-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt3a.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt3b-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt3b.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt4-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt4.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt5-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt5.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-ibt.s
property-x86-shstk1a-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk1a.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk1b-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk1b.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk2-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk2.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk3a-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk3a.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk3b-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk3b.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk4-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk4.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk5-x32.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk5.d	Change the output of readelf's note display so that the "Data size" column header is left justified.	2019-08-08 17:04:31 +01:00
property-x86-shstk.s
protected1.d
protected1.s
protected2-k1om.d
protected2-l1om.d
protected2.d
protected2.s
protected3-k1om.d
protected3-l1om.d
protected3.d
protected3.s
protected4.d
protected4.s
protected5.d
protected5.s
protected6.s
protected6a.d
protected6b.d
protected7.s
protected7a.d
protected7b.d
protected8.d
protected8.s
simple.c
split-by-file1.s
split-by-file2.s
split-by-file-nacl.rd
split-by-file.rd
start.s
tls-def1.c
tls-gd1.S
tls-ld1.S
tls-main1.c
tls.exp	x86-64: Skip GNU2 TLS tests only without compiler support	2020-01-22 06:22:41 -08:00
tlsbin2-nacl.rd
tlsbin2.dd
tlsbin2.rd
tlsbin2.sd
tlsbin2.td
tlsbin-nacl.rd
tlsbin.dd
tlsbin.rd
tlsbin.s
tlsbin.sd
tlsbin.td
tlsbindesc-nacl.rd
tlsbindesc.dd
tlsbindesc.rd
tlsbindesc.s
tlsbindesc.sd
tlsbindesc.td
tlsbinpic2.s
tlsbinpic.s
tlsdesc1a.c
tlsdesc1b.c
tlsdesc2.d
tlsdesc-nacl.pd
tlsdesc-nacl.rd
tlsdesc.dd
tlsdesc.pd
tlsdesc.rd
tlsdesc.s
tlsdesc.sd
tlsdesc.td
tlsg.s
tlsg.sd
tlsgd1.dd
tlsgd1.s
tlsgd2.d
tlsgd2.s
tlsgd3.d
tlsgd3.s
tlsgd4.dd
tlsgd4.s
tlsgd5.dd
tlsgd5a.s
tlsgd5b.s
tlsgd5c.s
tlsgd6.dd
tlsgd6a.s
tlsgd6b.s
tlsgd6c.s
tlsgd7.dd
tlsgd7.s
tlsgd8.dd
tlsgd8.s
tlsgd9.dd
tlsgd9.s
tlsgd10.dd
tlsgd10.s
tlsgd11.dd
tlsgd11.s
tlsgd12.d
tlsgd12.s
tlsgd13.d
tlsgd13.s
tlsgd14.dd
tlsgd14.s
tlsgdesc-nacl.rd
tlsgdesc.dd
tlsgdesc.rd
tlsgdesc.s
tlsie1.dd
tlsie1.s
tlsie2.d
tlsie2.s
tlsie3.d
tlsie3.s
tlsie4.dd
tlsie4.s
tlsld1.dd
tlsld1.s
tlsld2.dd
tlsld2.s
tlsld3.dd
tlsld3.s
tlsld4.dd
tlsld4.s
tlsld5.dd
tlsld5.s
tlsld6.dd
tlsld6.s
tlsle1.d
tlsle1.s
tlslib.s
tlspic1.s
tlspic2-nacl.rd
tlspic2.dd
tlspic2.rd
tlspic2.s
tlspic2.sd
tlspic2.td
tlspic3.s
tlspic-nacl.rd
tlspic.dd
tlspic.rd
tlspic.sd
tlspic.td
tlspie1.d	Ensure that binutils test names are unique.	2018-09-17 10:10:47 +01:00
tlspie1.s
tlspie2.s
tlspie2a.d
tlspie2b.d
tlspie2c.d
undefined.s
unique1.d
unique1.s
x86-64-64-export-class.rd
x86-64-x32-export-class.rd
x86-64-x32.rd
x86-64.exp	Remove perror from ld_assemble, ld_compile and ld_nm	2020-06-20 15:53:37 +09:30