mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2025-01-18 12:24:38 +08:00
34877895ca
- Rationale:
It is possible for compilers to indicate the desired byte order
interpretation of scalar variables using the DWARF attribute:
DW_AT_endianity
A type flagged with this variable would typically use one of:
DW_END_big
DW_END_little
which instructs the debugger what the desired byte order interpretation
of the variable should be.
The GCC compiler (as of V6) has a mechanism for setting the desired byte
ordering of the fields within a structure or union. For, example, on a
little endian target, a structure declared as:
struct big {
int v;
short a[4];
} __attribute__( ( scalar_storage_order( "big-endian" ) ) );
could be used to ensure all the structure members have a big-endian
interpretation (the compiler would automatically insert byte swap
instructions before and after respective store and load instructions).
- To reproduce
GCC V8 is required to correctly emit DW_AT_endianity DWARF attributes
in all situations when the scalar_storage_order attribute is used.
A fix for (dwarf endianity instrumentation) for GCC V6-V7 can be found
in the URL field of the following PR:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82509
- Test-case:
A new test case (testsuite/gdb.base/endianity.*) is included with this
patch.
Manual testing for mixed endianity code has also been done with GCC V8.
See:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82509#c4
- Observed vs. expected:
Without this change, using scalar_storage_order that doesn't match the
target, such as
struct otherendian
{
int v;
} __attribute__( ( scalar_storage_order( "big-endian" ) ) );
would behave like the following on a little endian target:
Breakpoint 1 at 0x401135: file endianity.c, line 41.
(gdb) run
Starting program: /home/pjoot/freeware/t/a.out
Missing separate debuginfos, use: debuginfo-install glibc-2.17-292.el7.x86_64
Breakpoint 1, main () at endianity.c:41
41 struct otherendian o = {3};
(gdb) n
43 do_nothing (&o); /* START */
(gdb) p o
$1 = {v = 50331648}
(gdb) p /x
$2 = {v = 0x3000000}
whereas with this gdb enhancement we can access the variable with the user
specified endianity:
Breakpoint 1, main () at endianity.c:41
41 struct otherendian o = {3};
(gdb) p o
$1 = {v = 0}
(gdb) n
43 do_nothing (&o); /* START */
(gdb) p o
$2 = {v = 3}
(gdb) p o.v = 4
$3 = 4
(gdb) p o.v
$4 = 4
(gdb) x/4xb &o.v
0x7fffffffd90c: 0x00 0x00 0x00 0x04
(observe that the 4 byte int variable has a big endian representation in the
hex dump.)
gdb/ChangeLog
2019-11-21 Peeter Joot <peeter.joot@lzlabs.com>
Byte reverse display of variables with DW_END_big, DW_END_little
(DW_AT_endianity) dwarf attributes if different than the native
byte order.
* ada-lang.c (ada_value_binop):
Use type_byte_order instead of gdbarch_byte_order.
* ada-valprint.c (printstr):
(ada_val_print_string):
* ada-lang.c (value_pointer):
(ada_value_binop):
Use type_byte_order instead of gdbarch_byte_order.
* c-lang.c (c_get_string):
Use type_byte_order instead of gdbarch_byte_order.
* c-valprint.c (c_val_print_array):
Use type_byte_order instead of gdbarch_byte_order.
* cp-valprint.c (cp_print_class_member):
Use type_byte_order instead of gdbarch_byte_order.
* dwarf2loc.c (rw_pieced_value):
Use type_byte_order instead of gdbarch_byte_order.
* dwarf2read.c (read_base_type): Handle DW_END_big,
DW_END_little
* f-lang.c (f_get_encoding):
Use type_byte_order instead of gdbarch_byte_order.
* findvar.c (default_read_var_value):
Use type_byte_order instead of gdbarch_byte_order.
* gdbtypes.c (check_types_equal):
Require matching TYPE_ENDIANITY_NOT_DEFAULT if set.
(recursive_dump_type): Print TYPE_ENDIANITY_BIG,
and TYPE_ENDIANITY_LITTLE if set.
(type_byte_order): new function.
* gdbtypes.h (TYPE_ENDIANITY_NOT_DEFAULT): New macro.
(struct main_type) <flag_endianity_not_default>:
New field.
(type_byte_order): New function.
* infcmd.c (default_print_one_register_info):
Use type_byte_order instead of gdbarch_byte_order.
* p-lang.c (pascal_printstr):
Use type_byte_order instead of gdbarch_byte_order.
* p-valprint.c (pascal_val_print):
Use type_byte_order instead of gdbarch_byte_order.
* printcmd.c (print_scalar_formatted):
Use type_byte_order instead of gdbarch_byte_order.
* solib-darwin.c (darwin_current_sos):
Use type_byte_order instead of gdbarch_byte_order.
* solib-svr4.c (solib_svr4_r_ldsomap):
Use type_byte_order instead of gdbarch_byte_order.
* stap-probe.c (stap_modify_semaphore):
Use type_byte_order instead of gdbarch_byte_order.
* target-float.c (target_float_same_format_p):
Use type_byte_order instead of gdbarch_byte_order.
* valarith.c (scalar_binop):
(value_bit_index):
Use type_byte_order instead of gdbarch_byte_order.
* valops.c (value_cast):
Use type_byte_order instead of gdbarch_byte_order.
* valprint.c (generic_emit_char):
(generic_printstr):
(val_print_string):
Use type_byte_order instead of gdbarch_byte_order.
* value.c (unpack_long):
(unpack_bits_as_long):
(unpack_value_bitfield):
(modify_field):
(pack_long):
(pack_unsigned_long):
Use type_byte_order instead of gdbarch_byte_order.
* findvar.c (unsigned_pointer_to_address):
(signed_pointer_to_address):
(unsigned_address_to_pointer):
(address_to_signed_pointer):
(default_read_var_value):
(default_value_from_register):
Use type_byte_order instead of gdbarch_byte_order.
* gnu-v3-abi.c (gnuv3_make_method_ptr):
Use type_byte_order instead of gdbarch_byte_order.
* riscv-tdep.c (riscv_print_one_register_info):
Use type_byte_order instead of gdbarch_byte_order.
gdb/testsuite/ChangeLog
2019-11-21 Peeter Joot <peeter.joot@lzlabs.com>
* gdb.base/endianity.c: New test.
* gdb.base/endianity.exp: New file.
Change-Id: I4bd98c1b4508c2d7c5a5dbb15d7b7b1cb4e667e2
|
||
|---|---|---|
| bfd | ||
| binutils | ||
| config | ||
| contrib | ||
| cpu | ||
| elfcpp | ||
| etc | ||
| gas | ||
| gdb | ||
| gnulib | ||
| gold | ||
| gprof | ||
| include | ||
| intl | ||
| ld | ||
| libctf | ||
| libdecnumber | ||
| libiberty | ||
| opcodes | ||
| readline | ||
| sim | ||
| texinfo | ||
| zlib | ||
| .cvsignore | ||
| .gitattributes | ||
| .gitignore | ||
| ar-lib | ||
| ChangeLog | ||
| compile | ||
| config-ml.in | ||
| config.guess | ||
| config.rpath | ||
| config.sub | ||
| configure | ||
| configure.ac | ||
| COPYING | ||
| COPYING3 | ||
| COPYING3.LIB | ||
| COPYING.LIB | ||
| COPYING.LIBGLOSS | ||
| COPYING.NEWLIB | ||
| depcomp | ||
| djunpack.bat | ||
| install-sh | ||
| libtool.m4 | ||
| lt~obsolete.m4 | ||
| ltgcc.m4 | ||
| ltmain.sh | ||
| ltoptions.m4 | ||
| ltsugar.m4 | ||
| ltversion.m4 | ||
| MAINTAINERS | ||
| Makefile.def | ||
| Makefile.in | ||
| Makefile.tpl | ||
| makefile.vms | ||
| missing | ||
| mkdep | ||
| mkinstalldirs | ||
| move-if-change | ||
| multilib.am | ||
| README | ||
| README-maintainer-mode | ||
| setup.com | ||
| src-release.sh | ||
| symlink-tree | ||
| test-driver | ||
| ylwrap | ||
README for GNU development tools This directory contains various GNU compilers, assemblers, linkers, debuggers, etc., plus their support routines, definitions, and documentation. If you are receiving this as part of a GDB release, see the file gdb/README. If with a binutils release, see binutils/README; if with a libg++ release, see libg++/README, etc. That'll give you info about this package -- supported targets, how to use it, how to report bugs, etc. It is now possible to automatically configure and build a variety of tools with one command. To build all of the tools contained herein, run the ``configure'' script here, e.g.: ./configure make To install them (by default in /usr/local/bin, /usr/local/lib, etc), then do: make install (If the configure script can't determine your type of computer, give it the name as an argument, for instance ``./configure sun4''. You can use the script ``config.sub'' to test whether a name is recognized; if it is, config.sub translates it to a triplet specifying CPU, vendor, and OS.) If you have more than one compiler on your system, it is often best to explicitly set CC in the environment before running configure, and to also set CC when running make. For example (assuming sh/bash/ksh): CC=gcc ./configure make A similar example using csh: setenv CC gcc ./configure make Much of the code and documentation enclosed is copyright by the Free Software Foundation, Inc. See the file COPYING or COPYING.LIB in the various directories, for a description of the GNU General Public License terms under which you can copy the files. REPORTING BUGS: Again, see gdb/README, binutils/README, etc., for info on where and how to report problems.