mirror/binutils-gdb
2
0
Fork 0
mirror of https://sourceware.org/git/binutils-gdb.git synced 2024-12-15 04:31:49 +08:00
Code Issues Packages Projects Releases Wiki Activity
32c36c3ce9
binutils-gdb/gas/ChangeLog
Andre Vieira 32c36c3ce9 [binutils, ARM, 16/16] Add support to VLDR and VSTR of system registers 
GNU as' Arm backend assumes each mnemonic has a single entry in the instruction table but VLDR (system register) and VSTR (system register) are different instructions than VLDR and VSTR. It is thus necessary to add some form of demultiplexing in the parser. It starts by creating a new operand type OP_VLDR which indicate that the operand is either the existing OP_RVSD operand or a system register. The function parse_operands () then tries these two cases in order, calling the new parse_sys_vldr_vstr for the second case.

Since the encoding function is specified in the instruction table entry, it also need to have some sort of demultiplexing. This is done in do_vldr_vstr which either calls the existing do_neon_ldr_str () or calls the new do_t_vldr_vstr_sysreg ().

A new internal relocation is needed as well since the offset has a shorter range than in other Thumb coprocessor instructions. Disassembly also requires special care since VSTR (system register) reuse the STC encoding with the coprocessor number 15. Armv8.1-M Mainline ARM manual states that coprocessor 8, 14 and 15 are reserved for floating-point and MVE instructions a feature bit check is added if the coprocessor number is one of this value and we are trying to match a coprocessor instruction (eg. STC) to forbid the match.

ChangeLog entries are as follows:

*** bfd/ChangeLog ***

2019-04-15  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* reloc.c (BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM): New internal
	relocation.
	* bfd-in2.h: Regenerate.
	* libbfd.h: Likewise.

*** gas/ChangeLog ***

2019-04-15  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* config/tc-arm.c (parse_sys_vldr_vstr): New function.
	(OP_VLDR): New enum operand_parse_code enumerator.
	(parse_operands): Add logic for OP_VLDR.
	(do_t_vldr_vstr_sysreg): New function.
	(do_vldr_vstr): Likewise.
	(insns): Guard VLDR and VSTR by arm_ext_v4t for Thumb mode.
	(md_apply_fix): Add bound check for VLDR and VSTR co-processor offset.
	Add masking logic for BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM relocation.
	* testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Add examples of bad
	uses of VLDR and VSTR.
	* testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Add error messages for
	above bad uses.
	* testsuite/gas/arm/archv8m_1m-cmse-main.s: Add examples of VLDR and
	VSTR valid uses.
	* testsuite/gas/arm/archv8m_1m-cmse-main.d: Add disassembly for the
	above examples.

*** opcodes/ChangeLog ***

2019-04-15  Thomas Preud'homme  <thomas.preudhomme@arm.com>

	* arm-dis.c (coprocessor_opcodes): Document new %J and %K format
	specifier.  Add entries for VLDR and VSTR of system registers.
	(print_insn_coprocessor): Forbid coprocessor numbers 8, 14 and 15 in
	coprocessor instructions on Armv8.1-M Mainline targets.  Add handling
	of %J and %K format specifier.
2019-04-15 12:32:01 +01:00

1301 lines
51 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (parse_sys_vldr_vstr): New function.
(OP_VLDR): New enum operand_parse_code enumerator.
(parse_operands): Add logic for OP_VLDR.
(do_t_vldr_vstr_sysreg): New function.
(do_vldr_vstr): Likewise.
(insns): Guard VLDR and VSTR by arm_ext_v4t for Thumb mode.
(md_apply_fix): Add bound check for VLDR and VSTR co-processor offset.
Add masking logic for BFD_RELOC_ARM_T32_VLDR_VSTR_OFF_IMM relocation.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Add examples of bad
uses of VLDR and VSTR.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Add error messages for
above bad uses.
* testsuite/gas/arm/archv8m_1m-cmse-main.s: Add examples of VLDR and
VSTR valid uses.
* testsuite/gas/arm/archv8m_1m-cmse-main.d: Add disassembly for the
above examples.
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (arm_typed_reg_parse): Fix typo in comment.
(enum reg_list_els): New REGLIST_VFP_S_VPR and REGLIST_VFP_D_VPR
enumerators.
(parse_vfp_reg_list): Add new partial_match parameter. Set
*partial_match to TRUE if at least one element in the register list has
matched. Add support for REGLIST_VFP_S_VPR and REGLIST_VFP_D_VPR
register lists which expect VPR as last element in the list.
(s_arm_unwind_save_vfp_armv6): Adapt call to parse_vfp_reg_list to new
prototype.
(s_arm_unwind_save_vfp): Likewise.
(enum operand_parse_code): New OP_VRSDVLST enumerator.
(parse_operands): Adapt call to parse_vfp_reg_list to new prototype.
Handle new OP_VRSDVLST case.
(do_t_vscclrm): New function.
(insns): New entry for VSCCLRM instruction.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Add invalid VSCCLRM
instructions.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Add error expectations
for above instructions.
* testsuite/gas/arm/archv8m_1m-cmse-main.s: Add tests for VSCCLRM
instruction.
* testsuite/gas/arm/archv8m_1m-cmse-main.d: Add expected disassembly
for above instructions.
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (enum reg_list_els): Define earlier and add
REGLIST_RN and REGLIST_CLRM enumerators.
(parse_reg_list): Add etype parameter to distinguish between regular
core register list and CLRM register list. Add logic to
recognize CLRM register list.
(parse_vfp_reg_list): Assert type is not for core register list.
(s_arm_unwind_save_core): Update call to parse_reg_list to new
prototype.
(enum operand_parse_code): Declare OP_CLRMLST enumerator.
(parse_operands): Update call to parse_reg_list to new prototype. Add
logic for OP_CLRMLST.
(encode_thumb2_ldmstm): Rename into ...
(encode_thumb2_multi): This. Add do_io parameter. Add logic to
encode CLRM and guard LDM/STM only code by do_io.
(do_t_ldmstm): Adapt to use encode_thumb2_multi.
(do_t_push_pop): Likewise.
(do_t_clrm): New function.
(insns): Define CLRM.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.d: New file.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.l: Likewise.
* testsuite/gas/arm/archv8m_1m-cmse-main-bad.s: Likewise.
* testsuite/gas/arm/archv8m_1m-cmse-main.d: Likewise.
* testsuite/gas/arm/archv8m_1m-cmse-main.s: Likewise.
2019-04-15 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (operand_parse_code): Add OP_LR and OP_oLR
for the LR operand and optional LR operand.
(parse_operands): Add switch cases for OP_LR and OP_oLR for
both type checking and value checking.
(encode_thumb32_addr_mode): New entries for DLS, WLS and LE.
(v8_1_loop_reloc): New helper function for handling labels
for the low overhead loop instructions.
(do_t_loloop): New function to encode DLS, WLS and LE.
(insns): New entries for WLS, DLS and LE.
(md_pcrel_from_section): New switch case
for BFD_RELOC_ARM_THUMB_LOOP12.
(md_appdy_fix): Likewise.
(tc_gen_reloc): Likewise.
* testsuite/gas/arm/armv8_1-m-tloop.s: New.
* testsuite/gas/arm/armv8_1-m-tloop.d: New.
* testsuite/gas/arm/armv8_1-m-tloop-bad.s: New.
* testsuite/gas/arm/armv8_1-m-tloop-bad.d: New.
* testsuite/gas/arm/armv8_1-m-tloop-bad.l: New.
2019-04-15 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (T16_32_TAB): New entriy for bfcsel.
(do_t_v8_1_branch): New switch case for bfcsel.
(toU): Define.
(insns): New instruction for bfcsel.
(md_pcrel_from_section): New switch case
for BFD_RELOC_THUMB_PCREL_BFCSEL.
(md_appdy_fix): Likewise
(tc_gen_reloc): Likewise.
* testsuite/gas/arm/armv8_1-m-bfcsel.d: New.
* testsuite/gas/arm/armv8_1-m-bfcsel.s: New.
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (md_pcrel_from_section): New switch case for
BFD_RELOC_ARM_THUMB_BF13.
(md_appdy_fix): Likewise.
(tc_gen_reloc): Likewise.
2019-04-15 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (T16_32_TAB): New entrie for bfl.
(do_t_v8_1_branch): New switch case for bfl.
(insns): New instruction for bfl.
* testsuite/gas/arm/armv8_1-m-bfl.d: New.
* testsuite/gas/arm/armv8_1-m-bfl.s: New.
* testsuite/gas/arm/armv8_1-m-bfl-bad.s: New.
* testsuite/gas/arm/armv8_1-m-bfl-bad.d: New.
* testsuite/gas/arm/armv8_1-m-bfl-bad.l: New.
* testsuite/gas/arm/armv8_1-m-bfl-rel.d: New.
* testsuite/gas/arm/armv8_1-m-bfl-rel.s: New.
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (md_pcrel_from_section): New switch case for
BFD_RELOC_ARM_THUMB_BF19.
(md_appdy_fix): Likewise.
(tc_gen_reloc): Likewise.
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (T16_32_TAB): New entries for bfx and bflx.
(do_t_v8_1_branch): New switch cases for bfx and bflx.
(insns): New instruction for bfx and bflx.
* testsuite/gas/arm/armv8_1-m-bf-exchange.d: New.
* testsuite/gas/arm/armv8_1-m-bf-exchange.s: New.
* testsuite/gas/arm/armv8_1-m-bf-exchange-bad.s: New
* testsuite/gas/arm/armv8_1-m-bf-exchange-bad.l: New
* testsuite/gas/arm/armv8_1-m-bf-exchange-bad.d: New
2019-04-15 Sudakshina Das <sudi.das@arm.com>
Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (T16_32_TAB): New entries for bf.
(do_t_branch_future): New.
(insns): New instruction for bf.
* testsuite/gas/arm/armv8_1-m-bf.d: New.
* testsuite/gas/arm/armv8_1-m-bf.s: New.
* testsuite/gas/arm/armv8_1-m-bf-bad.s: New.
* testsuite/gas/arm/armv8_1-m-bf-bad.l: New.
* testsuite/gas/arm/armv8_1-m-bf-bad.d: New.
* testsuite/gas/arm/armv8_1-m-bf-rel.d: New.
* testsuite/gas/arm/armv8_1-m-bf-rel.s: New.
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (md_pcrel_from_section): New switch case for
BFD_RELOC_ARM_THUMB_BF17.
(md_appdy_fix): Likewise.
(tc_gen_reloc): Likewise.
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (ARM_IT_MAX_RELOCS): New macro.
(arm_it): Member reloc renamed relocs and updated to an array.
Rest: Replace all occurrences of reloc to relocs[0].
2019-04-15 Sudakshina Das <sudi.das@arm.com>
* config/tc-arm.c (md_pcrel_from_section): New switch case
for BFD_RELOC_THUMB_PCREL_BRANCH5.
(v8_1_branch_value_check): New function to check branch
offsets.
(md_appdy_fix): New switch case for
BFD_RELOC_THUMB_PCREL_BRANCH5.
(tc_gen_reloc): Likewise.
2019-04-15 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (do_neon_movhf): Remove fp-armv8 check.
(armv8_1m_main_ext_table): New extension table.
(arm_archs): Use the new extension table.
* doc/c-arm.texi: Add missing arch and document new extensions.
* testsuite/gas/arm/armv8.1-m.main-fp.d: New.
* testsuite/gas/arm/armv8.1-m.main-fp-dp.d: New.
* testsuite/gas/arm/armv8.1-m.main-hp.d: New.
2019-04-15 Thomas Preud'homme <thomas.preudhomme@arm.com>
* config/tc-arm.c (cpu_arch_ver): Add entry for Armv8.1-M Mainline
Tag_CPU_arch build attribute value. Reindent.
(get_aeabi_cpu_arch_from_fset): Update assert.
(aeabi_set_public_attributes): Update assert for Tag_DIV_use logic.
* testsuite/gas/arm/attr-march-armv8_1-m.main.d: New test.
2019-04-09 Matthew Fortune <matthew.fortune@mips.com>
* config/tc-mips.c (mips_cpu_info_table): Add i6500. Update
default ASEs for i6400.
* doc/c-mips.texi (-march): Document i6500.
* testsuite/gas/mips/elf_mach_i6400.d: New test.
* testsuite/gas/mips/elf_mach_i6500.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
2019-04-09 Matthew Fortune <matthew.fortune@mips.com>
* config/tc-mips.c (mips_set_options) <init_ase>: New field.
(file_mips_opts, mips_opts) <init_ase>: Initialize new field.
(file_mips_check_options): Propagate initial ASE settings.
(mips_after_parse_args, parse_code_option): Track the initial
ASE settings for a CPU.
(s_mipsset): Restore the initial ASE settings when reverting
to the default arch.
* testsuite/gas/mips/elf_mach_p6600.d: New test.
* testsuite/gas/mips/mips.exp: Run the new test.
2019-04-12 John Darrington <john@darrington.wattle.id.au>
config/tc-s12z.h: Remove definition of macro TC_M68K
2019-04-01 John Darrington <john@darrington.wattle.id.au>
config/tc-s12z.c: Use bfd_boolean where appropriate.
2019-04-11 Max Filippov <jcmvbkbc@gmail.com>
* testsuite/gas/xtensa/loop-relax-2.d: New test definition.
* testsuite/gas/xtensa/loop-relax.d: New test definition.
* testsuite/gas/xtensa/loop-relax.s: New test source.
* testsuite/gas/xtensa/text-section-literals-1a.d: New test
definition.
* testsuite/gas/xtensa/text-section-literals-2.d: New test
definition.
* testsuite/gas/xtensa/text-section-literals-2.s: New test
source.
* testsuite/gas/xtensa/text-section-literals-2a.d: New test
definition.
* testsuite/gas/xtensa/text-section-literals-3.d: New test
definition.
* testsuite/gas/xtensa/text-section-literals-3.s: New test
source.
* testsuite/gas/xtensa/text-section-literals-4.d: New test
definition.
* testsuite/gas/xtensa/text-section-literals-4.s: New test
source.
* testsuite/gas/xtensa/text-section-literals-4a.d: New test
definition.
2019-04-11 Max Filippov <jcmvbkbc@gmail.com>
* testsuite/gas/xtensa/all.exp: Remove all expect-based
tests and all explicit run_dump_test / run_list_test
invocations. Add run_dump_tests for all .d files in the
test subdirectory.
* testsuite/gas/xtensa/entry_align.d: New test definition.
* testsuite/gas/xtensa/entry_align.l: New test output.
* testsuite/gas/xtensa/entry_misalign.d: New test definition.
* testsuite/gas/xtensa/entry_misalign2.d: New test definition.
* testsuite/gas/xtensa/j_too_far.d: New test definition.
* testsuite/gas/xtensa/j_too_far.l: New test output.
* testsuite/gas/xtensa/loop_align.d: New test definition.
* testsuite/gas/xtensa/loop_misalign.d: New test definition.
* testsuite/gas/xtensa/trampoline-2.d: New test definition.
* testsuite/gas/xtensa/trampoline-2.l: Remove empty output.
* testsuite/gas/xtensa/xtensa-err.exp: Use positive logic.
2019-04-11 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xtensa_literal_pseudo): Drop code that has
no effect.
(get_literal_pool_location): Only search for the literal pool
when auto litpools is used, otherwise take one recorded in the
tc_segment_info_data.
(xtensa_assign_litpool_addresses): New function.
(xtensa_move_literals): Don't duplicate 'literal pool location
required...' error message. Call xtensa_assign_litpool_addresses.
2019-04-11 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (xtensa_is_init_fini): Add declaration.
(xtensa_mark_literal_pool_location): Don't add fill frag to literal
section that records literal pool location.
(md_begin): Call xtensa_mark_literal_pool_location when text
section literals or auto litpools are used.
(xtensa_elf_section_change_hook): Call
xtensa_mark_literal_pool_location when text section literals or
auto litpools are used, there's no literal pool location defined
for the current section and it's not .init or .fini.
* testsuite/gas/xtensa/auto-litpools-first1.d: Fix up addresses.
* testsuite/gas/xtensa/auto-litpools-first2.d: Likewise.
* testsuite/gas/xtensa/auto-litpools.d: Likewise.
2019-04-11 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (process_omitted_operand): Add case for
AARCH64_OPND_Rt_SP.
(parse_operands): Likewise.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Update tests.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
2019-04-11 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/armv8_5-a-memtag.d: New tests for ldgm and stgm.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
2019-04-10 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* config/tc-i386.c (need_plt32_p) [TE_SOLARIS]: Return FALSE.
* testsuite/gas/i386/solaris/solaris.exp: New driver.
* testsuite/gas/i386/solaris/reloc64.d,
testsuite/gas/i386/solaris/x86-64-jump.d,
testsuite/gas/i386/solaris/x86-64-mpx-branch-1.d,
testsuite/gas/i386/solaris/x86-64-mpx-branch-2.d,
testsuite/gas/i386/solaris/x86-64-nop-3.d,
testsuite/gas/i386/solaris/x86-64-nop-4.d,
testsuite/gas/i386/solaris/x86-64-nop-5.d,
testsuite/gas/i386/solaris/x86-64-relax-2.d,
testsuite/gas/i386/solaris/x86-64-relax-3.d: New tests.
* testsuite/gas/i386/reloc64.d,
testsuite/gas/i386/x86-64-jump.d,
testsuite/gas/i386/x86-64-mpx-branch-1.d,
testsuite/gas/i386/x86-64-mpx-branch-2.d,
testsuite/gas/i386/x86-64-nop-3.d,
testsuite/gas/i386/x86-64-nop-4.d,
testsuite/gas/i386/x86-64-nop-5.d,
testsuite/gas/i386/x86-64-relax-2.d,
testsuite/gas/i386/x86-64-relax-3.d: Skip on *-*-solaris*.
2019-04-10 Alan Modra <amodra@gmail.com>
* config/te-cloudabi.h: New file.
* config/tc-aarch64.c (aarch64_after_parse_args): Use TE_CLOUDABI
rather than TARGET_OS to select cloudabi.
* config/tc-i386.h (ELF_TARGET_FORMAT64): Define for TE_CLOUDABI.
* configure.tgt (*-*-cloudabi*): Set em=cloudabi.
2019-04-09 Robert Suchanek <robert.suchanek@mips.com>
* testsuite/gas/mips/mips.exp: Run hwr-names test.
* testsuite/gas/mips/hwr-names.s: Add test cases for RDHWR with
the SEL field.
* testsuite/gas/mips/mipsr6@hwr-names.d: New file.
2019-04-08 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (output_insn): Support
GNU_PROPERTY_X86_ISA_1_AVX512_BF16.
* testsuite/gas/i386/property-2.s: Add AVX512_BF16 test.
* testsuite/gas/i386/property-2.d: Updated.
* testsuite/gas/i386/x86-64-property-2.d: Likewise.
2019-04-08 H.J. Lu <hongjiu.lu@intel.com>
* configure.tgt: Remove i386-*-kaos* and i386-*-chaos targets.
* testsuite/gas/i386/i386.exp: Remove *-*-caos* and "*-*-kaos*
check.
2019-04-05 H.J. Lu <hongjiu.lu@intel.com>
* testsuite/gas/i386/i386.exp: Run -mx86-used-note=yes tests.
* testsuite/gas/i386/property-2.d: New file.
* testsuite/gas/i386/property-2.s: Likewise.
* testsuite/gas/i386/x86-64-property-2.d: Likewise.
2019-04-05 Xuepeng Guo <xuepeng.guo@intel.com>
* config/tc-i386.c (cpu_arch): Add .avx512_bf16.
(cpu_noarch): Add noavx512_bf16.
* doc/c-i386.texi: Document avx512_bf16.
* testsuite/gas/i386/avx512_bf16.d: New file.
* testsuite/gas/i386/avx512_bf16.s: Likewise.
* testsuite/gas/i386/avx512_bf16_vl-inval.l: Likewise.
* testsuite/gas/i386/avx512_bf16_vl-inval.s: Likewise.
* testsuite/gas/i386/avx512_bf16_vl.d: Likewise.
* testsuite/gas/i386/avx512_bf16_vl.s: Likewise.
* testsuite/gas/i386/x86-64-avx512_bf16.d: Likewise.
* testsuite/gas/i386/x86-64-avx512_bf16.s: Likewise.
* testsuite/gas/i386/x86-64-avx512_bf16_vl-inval.l: Likesie.
* testsuite/gas/i386/x86-64-avx512_bf16_vl-inval.s: Likewise.
* testsuite/gas/i386/x86-64-avx512_bf16_vl.d: Likewise.
* testsuite/gas/i386/x86-64-avx512_bf16_vl.s: Likewise.
* testsuite/gas/i386/i386.exp: Add BF16 related tests.
2019-04-05 Alan Modra <amodra@gmail.com>
* testsuite/gas/ppc/bc.s,
* testsuite/gas/ppc/bcat.d,
* testsuite/gas/ppc/bcaterr.d,
* testsuite/gas/ppc/bcaterr.l,
* testsuite/gas/ppc/bcy.d,
* testsuite/gas/ppc/bcyerr.d,
* testsuite/gas/ppc/bcyerr.l: New tests.
* testsuite/gas/ppc/ppc.exp: Run them.
2019-04-05 Alan Modra <amodra@gmail.com>
* testsuite/gas/ppc/476.d: Remove trailing spaces.
* testsuite/gas/ppc/a2.d: Likewise.
* testsuite/gas/ppc/booke.d: Likewise.
* testsuite/gas/ppc/booke_xcoff.d: Likewise.
* testsuite/gas/ppc/e500.d: Likewise.
* testsuite/gas/ppc/e500mc.d: Likewise.
* testsuite/gas/ppc/e6500.d: Likewise.
* testsuite/gas/ppc/htm.d: Likewise.
* testsuite/gas/ppc/power6.d: Likewise.
* testsuite/gas/ppc/power8.d: Likewise.
* testsuite/gas/ppc/power9.d: Likewise.
* testsuite/gas/ppc/vle.d: Likewise.
2019-04-04 Peter Bergner <bergner@linux.ibm.com>
PR gas/24349
* testsuite/gas/ppc/power8.s: (bdnztar, bdnztarl, bdztar, bdztarl,
btar, btarl, bdnztar-, bdnztarl-, bdnztar+, bdnztarl+, bdztar-,
bdztarl-, bdztar+, bdztarl+, bgetar, bnltar, bgetarl, bnltarl,
bletar, bngtar, bletarl, bngtarl, bnetar, bnetarl, bnstar, bnutar,
bnstarl, bnutarl, bgetar-, bnltar-, bgetarl-, bnltarl-, bletar-,
bngtar-, bletarl-, bngtarl-, bnetar-, bnetarl-, bnstar-, bnutar-,
bnstarl-, bnutarl-, bgetar+, bnltar+, bgetarl+, bnltarl+, bletar+,
bngtar+, bletarl+, bngtarl+, bnetar+, bnetarl+, bnstar+, bnutar+,
bnstarl+, bnutarl+, blttar, blttarl, bgttar, bgttarl, beqtar,
beqtarl, bsotar, buntar, bsotarl, buntarl, blttar-, blttarl-,
bgttar-, bgttarl-, beqtar-, beqtarl-, bsotar-, buntar-, bsotarl-,
buntarl-, blttar+, blttarl+, bgttar+, bgttarl+, beqtar+, beqtarl+,
bsotar+, buntar+, bsotarl+, buntarl+, bdnzftar, bdnzftarl, bdzftar,
bdzftarl, bftar, bftarl, bftar-, bftarl-, bftar+, bftarl+, bdnzttar,
bdnzttarl, bdzttar, bdzttarl, bttar, bttarl, bttar-, bttarl-, bttar+,
bttarl+): Add tests of extended mnemonics.
* testsuite/gas/ppc/power8.d: Likewise. Update previous bctar tests
to expect new extended mnemonics.
* testsuite/gas/ppc/a2.s: <bc, bc-, bc+, bcl, bcl-, bcl+>: Update test
to not use illegal BO value. Use a more convenient BI value.
* testsuite/gas/ppc/a2.d: Update tests for new expect output.
2019-04-03 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (convert_frag_immed): Drop
convert_frag_immed_finish_loop invocation.
(convert_frag_immed_finish_loop): Drop declaration and
definition.
* config/xtensa-relax.c (widen_spec_list): Replace loop
widening that uses addi/addmi with widening that uses l32r
and const16.
2019-04-01 Andre Vieira <andre.simoesdiasvieira@arm.com>
* config/tc-arm.c (arm_ext_table): New struct type.
(arm_arch_option_table): Add new 'arm_ext_table' field.
(ARM_EXT,ARM_ADD,ARM_REMOVE, ALL_FP): New macros.
(armv5te_ext_table, armv7ve_ext_table, armv7a_ext_table,
armv7r_ext_table, armv7em_ext_table, armv8a_ext_table,
armv81a_ext_table, armv82a_ext_table, armv84a_ext_table,
armv85a_ext_table, armv8m_main_ext_table,
armv8r_ext_table): New architecture extension tables.
(ARM_ARCH_OPT): Add new default field.
(ARM_ARCH_OPT2): New macro.
(arm_archs): Extend some architectures with the new architecture
extension tables mentioned above.
(arm_extensions): Add DEPRECATED comment with instructions to
use new table.
(arm_parse_extension): Change to use new extension tables.
(arm_parse_cpu): Don't change existing behavior.
(arm_parse_arch): Change to use new extension tables.
* doc/c-arm.texi: Document new architecture extensions.
* testsuite/gas/arm/attr-mfpu-neon-fp16.d: Change test to use new
extension option rather than -mfpu and change expected behaviour to
sane outputs.
* testsuite/gas/arm/armv8-2-fp16-scalar-bad-ext.d: New.
* testsuite/gas/arm/armv8-2-fp16-scalar-ext.d: New.
* testsuite/gas/arm/armv8-2-fp16-scalar-thumb-ext.d: New.
* testsuite/gas/arm/armv8-2-fp16-simd-ext.d: New.
* testsuite/gas/arm/armv8-2-fp16-simd-thumb-ext.d: New.
* testsuite/gas/arm/armv8-2-fp16-simd-warning-ext.d: New.
* testsuite/gas/arm/armv8-2-fp16-simd-warning-thumb-ext.d: New.
* testsuite/gas/arm/armv8_2+rdma-ext.d: New.
* testsuite/gas/arm/armv8_2-a-fp16-thumb2-ext.d: New.
* testsuite/gas/arm/armv8_2-a-fp16_ext.d: New.
* testsuite/gas/arm/armv8_3-a-fp-bad-ext.d: New.
* testsuite/gas/arm/armv8_3-a-fp-ext.d: New.
* testsuite/gas/arm/armv8_3-a-fp16-ext.d: New.
* testsuite/gas/arm/armv8_3-a-simd-bad-ext.d: New.
* testsuite/gas/arm/armv8_4-a-fp16-ext.d: New.
* testsuite/gas/arm/armv8m.main+fp.d: New.
* testsuite/gas/arm/armv8m.main+fp.dp.d: New.
* testsuite/gas/arm/attr-ext-fpv5-d16.d: New.
* testsuite/gas/arm/attr-ext-fpv5.d: New.
* testsuite/gas/arm/attr-ext-idiv.d: New.
* testsuite/gas/arm/attr-ext-mp.d: New.
* testsuite/gas/arm/attr-ext-neon-fp16.d: New.
* testsuite/gas/arm/attr-ext-neon-vfpv3.d: New.
* testsuite/gas/arm/attr-ext-neon-vfpv4.d: New.
* testsuite/gas/arm/attr-ext-sec.d: New.
* testsuite/gas/arm/attr-ext-vfpv3-d16-fp16.d: New.
* testsuite/gas/arm/attr-ext-vfpv3-d16.d: New.
* testsuite/gas/arm/attr-ext-vfpv3-fp16.d: New.
* testsuite/gas/arm/attr-ext-vfpv3.d: New.
* testsuite/gas/arm/attr-ext-vfpv3xd-fp.d: New.
* testsuite/gas/arm/attr-ext-vfpv3xd.d: New.
* testsuite/gas/arm/attr-ext-vfpv4-d16.d: New.
* testsuite/gas/arm/attr-ext-vfpv4-sp-d16.d: New.
* testsuite/gas/arm/attr-ext-vfpv4.d: New.
* testsuite/gas/arm/dotprod-mandatory-ext.d: New.
* testsuite/gas/arm/fpv5-d16.s: New.
* testsuite/gas/arm/fpv5-sp-d16.s: New.
2019-03-28 Alan Modra <amodra@gmail.com>
PR 24390
* testsuite/gas/ppc/476.d: Update mtfsb*.
* testsuite/gas/ppc/a2.d: Likewise.
2019-03-21 Alan Modra <amodra@gmail.com>
* emul.h (struct emulation): Delete strip_underscore.
* emul-target.h (emul_strip_underscore): Don't define.
(emul_struct_name): Update initialization.
2019-03-21 Alan Modra <amodra@gmail.com>
* config/tc-d10v.c (md_apply_fix): Apply BFD_RELOC_8.
* config/tc-pdp11.c (md_apply_fix): Likewise.
* config/tc-d30v.c (md_apply_fix): Don't emit errors for BFD_RELOC_8,
BFD_RELOC_16, and BFD_RELOC_64.
* testsuite/gas/all/gas.exp: Move target exclusions for forward
test, but not cr16, to..
* testsuite/gas/all/forward.d: ..here, with explanation. Remove
d10v, d30v, and pdp11 xfails.
2019-03-19 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (optimize_encoding): Don't check AVX for
EVEX vector load/store optimization. Check both operands for
ZMM register. Update EVEX vector load/store opcode check.
Choose EVEX Disp8 over VEX Disp32.
* testsuite/gas/i386/optimize-1.d: Updated.
* testsuite/gas/i386/optimize-1a.d: Likewise.
* testsuite/gas/i386/optimize-2.d: Likewise.
* testsuite/gas/i386/optimize-4.d: Likewise.
* testsuite/gas/i386/optimize-5.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-2.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-2a.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-2b.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-3.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-5.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-6.d: Likewise.
* testsuite/gas/i386/optimize-1.s: Add ZMM register load
test.
* testsuite/gas/i386/x86-64-optimize-2.s: Likewise.
2019-03-19 H.J. Lu <hongjiu.lu@intel.com>
PR gas/24352
* config/tc-i386.c (optimize_encoding): Check only
cpu_arch_flags.bitfield.cpuavx512vl.
* testsuite/gas/i386/i386.exp: Run x86-64-optimize-2b.
* testsuite/gas/i386/x86-64-optimize-2.d: Revert the last
change.
* testsuite/gas/i386/x86-64-optimize-2b.d: New file.
* testsuite/gas/i386/x86-64-optimize-2b.s: Likewise.
2019-03-19 H.J. Lu <hongjiu.lu@intel.com>
PR gas/24359
* testsuite/gas/i386/i386.exp: Change optimize-6a, optimize-7,
x86-64-optimize-7a and x86-64-optimize-8 tests to run_list_test.
Remove optimize-6c and x86-64-optimize-7c tests.
* testsuite/gas/i386/noavx-3.l: Updated.
* testsuite/gas/i386/noavx-4.d: Likewise.
* testsuite/gas/i386/noavx-5.d: Likewise.
* testsuite/gas/i386/noavx-3.s: Add AVX512F tests.
* testsuite/gas/i386/noavx-4.s: Remove AVX512F tests.
* testsuite/gas/i386/nosse-5.s: Likewise.
* testsuite/gas/i386/optimize-6a.d: Removed.
* testsuite/gas/i386/optimize-6c.d: Likewise.
* testsuite/gas/i386/optimize-7.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-7a.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-7c.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-8.d: Likewise.
* testsuite/gas/i386/optimize-6a.l: New file.
* testsuite/gas/i386/optimize-6a.s: Likewise.
* testsuite/gas/i386/optimize-7.l: Likewise.
* testsuite/gas/i386/x86-64-optimize-7a.l: Likewise.
* testsuite/gas/i386/x86-64-optimize-7a.s: Likewise.
* testsuite/gas/i386/x86-64-optimize-8.l: Likewise.
2019-03-18 Alan Modra <amodra@gmail.com>
* config/m68k-parse.y (yylex): Use temp_ilp and restore_ilp.
* as.c (macro_expr): Likewise.
* macro.c (buffer_and_nest): Likewise.
* read.c (temp_ilp): Remove FIXME.
2019-03-18 H.J. Lu <hongjiu.lu@intel.com>
* testsuite/gas/i386/att-regs.d: Pass -O0 to assembler.
* testsuite/gas/i386/avx512bw-intel.d: Likewise.
* testsuite/gas/i386/avx512bw.d: Likewise.
* testsuite/gas/i386/avx512f-intel.d: Likewise.
* testsuite/gas/i386/avx512f.d: Likewise.
* testsuite/gas/i386/disp32.d: Likewise.
* testsuite/gas/i386/intel-regs.d: Likewise.
* testsuite/gas/i386/pseudos.d: Likewise.
* testsuite/gas/i386/x86-64-disp32.d: Likewise.
* testsuite/gas/i386/x86-64-pseudos.d: Likewise.
2019-03-18 H.J. Lu <hongjiu.lu@intel.com>
PR gas/24348
* config/tc-i386.c (optimize_encoding): Encode 128-bit and
256-bit EVEX vector register load/store instructions as VEX
vector register load/store instructions for -O1.
* doc/c-i386.texi: Update -O1 documentation.
* testsuite/gas/i386/i386.exp: Run PR gas/24348 tests.
* testsuite/gas/i386/optimize-1.s: Add tests for EVEX vector
load/store instructions.
* testsuite/gas/i386/optimize-2.s: Likewise.
* testsuite/gas/i386/optimize-3.s: Likewise.
* testsuite/gas/i386/optimize-5.s: Likewise.
* testsuite/gas/i386/x86-64-optimize-2.s: Likewise.
* testsuite/gas/i386/x86-64-optimize-3.s: Likewise.
* testsuite/gas/i386/x86-64-optimize-4.s: Likewise.
* testsuite/gas/i386/x86-64-optimize-5.s: Likewise.
* testsuite/gas/i386/x86-64-optimize-6.s: Likewise.
* testsuite/gas/i386/optimize-1.d: Updated.
* testsuite/gas/i386/optimize-2.d: Likewise.
* testsuite/gas/i386/optimize-3.d: Likewise.
* testsuite/gas/i386/optimize-4.d: Likewise.
* testsuite/gas/i386/optimize-5.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-2.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-3.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-4.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-5.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-6.d: Likewise.
* testsuite/gas/i386/optimize-7.d: New file.
* testsuite/gas/i386/optimize-7.s: Likewise.
* testsuite/gas/i386/x86-64-optimize-8.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-8.s: Likewise.
2019-03-18 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (optimize_encoding): Encode 256-bit/512-bit
VEX/EVEX vector register clearing instructions with 128-bit VEX
vector register clearing instructions at -O1.
* doc/c-i386.texi: Update -O1 and -O2 documentation.
* testsuite/gas/i386/i386.exp: Run optimize-1a and
x86-64-optimize-2a.
* testsuite/gas/i386/optimize-1a.d: New file.
* testsuite/gas/i386/x86-64-optimize-2a.d: Likewise.
2019-03-17 H.J. Lu <hongjiu.lu@intel.com>
PR gas/24353
* config/tc-i386.c: Include <limits.h> if it exists and try
including <sys/param.h> if we have it.
(INT_MAX): Define if not defined.
(md_parse_option): Set optimize to INT_MAX for -Os.
* testsuite/gas/i386/optimize-2.s: Add a test.
* testsuite/gas/i386/x86-64-optimize-3.s: Likewise.
* testsuite/gas/i386/optimize-2.d: Updated.
* testsuite/gas/i386/x86-64-optimize-3.d: Likewise.
2019-03-17 H.J. Lu <hongjiu.lu@intel.com>
PR gas/24352
* config/tc-i386.c (optimize_encoding): Encode 512-bit EVEX
with 128-bit VEX encoding only when AVX is enabled and with
128-bit EVEX encoding only when AVX512VL is enabled.
* testsuite/gas/i386/i386.exp: Run PR gas/24352 tests.
* testsuite/gas/i386/optimize-6.s: New file.
* testsuite/gas/i386/optimize-6a.d: Likewise.
* testsuite/gas/i386/optimize-6b.d: Likewise.
* testsuite/gas/i386/optimize-6c.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-7.s: Likewise.
* testsuite/gas/i386/x86-64-optimize-7a.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-7b.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-7c.d: Likewise.
* testsuite/gas/i386/x86-64-optimize-2.d: Updated.
2019-03-15 Li Hao <li.hao296@zte.com.cn>
PR 24308
* config/tc-i386.c (parse_insn): Check mnemp before using it to
determine if a suffix can be trimmed.
2019-03-13 Christian Eggers <ceggers@gmx.de>
* dwarf2dbg.c (out_set_addr): Align relocation within .debug_line.
2019-03-13 Christian Eggers <ceggers@gmx.de>
* dwarf2dbg.c (out_debug_line): Pad size of .debug_line section.
2019-03-13 Christian Eggers <ceggers@gmx.de>
* dwarf2dbg.c (out_debug_str): Use octets for .debug_string pointers.
2019-03-13 Christian Eggers <ceggers@gmx.de>
* dwarf2dbg.c (out_debug_line): Use octets for .debug_line prologue.
2019-03-13 Christian Eggers <ceggers@gmx.de>
* dwarf2dbg.c (out_debug_line): Use octets for dwarf2 headers.
(out_debug_aranges, out_debug_info): Likewise.
2019-03-13 Christian Eggers <ceggers@gmx.de>
* symbols.h (symbol_temp_new_now_octets): Declare.
(symbol_set_value_now_octets, symbol_octets_p): Declare.
* symbols.c (struct symbol_flags): New member sy_octets.
(symbol_temp_new_now_octets): New function.
(resolve_symbol_value): Return octets instead of bytes if
sy_octets is set.
(symbol_set_value_now_octets): New function.
(symbol_octets_p): New function.
2019-03-13 Christian Eggers <ceggers@gmx.de>
* dwarf2dbg.c (dwarf2_emit_insn): Fix calculation of line info offset.
2019-03-12 Andreas Krebbel <krebbel@linux.ibm.com>
* testsuite/gas/s390/zarch-arch13.s: Adjust testcase to optable changes.
* testsuite/gas/s390/zarch-arch13.d: Likewise.
2019-02-27 Matthew Malcomson <matthew.malcomson@arm.com>
* testsuite/gas/aarch64/dotproduct.d: Use multiple "as" lines.
* testsuite/gas/aarch64/dotproduct_armv8_4.d: Remove.
* testsuite/gas/aarch64/dotproduct_armv8_4.s: Remove.
* testsuite/gas/aarch64/illegal-dotproduct.d: Use multiple "as"
lines.
* testsuite/gas/aarch64/ldst-rcpc-armv8_2.d: Remove.
* testsuite/gas/aarch64/ldst-rcpc.d: Use multiple "as" lines.
2019-02-24 Alan Modra <amodra@gmail.com>
* config/tc-ppc.c (parse_tls_arg): Wrap in #ifdef OBJ_ELF.
2019-02-24 Alan Modra <amodra@gmail.com>
PR 24144
* config/obj-aout.c (obj_aout_frob_file_before_fix): Write to end
of section to ensure file contents cover aligned section size.
2019-02-22 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/tc-arm.c (arm_cpus): Add neoverse-n1.
* doc/c-arm.texi (-mcpu): Document neoverse-n1 value.
2019-02-22 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/tc-aarch64.c (aarch64_cpus): Add neoverse-e1.
* doc/c-aarch64.texi (-mcpu): Document neoverse-e1 value.
2019-02-22 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/tc-aarch64.c (aarch64_cpus): Add neoverse-n1.
* doc/c-aarch64.texi (-mcpu): Document neoverse-n1 value.
2019-02-19 Paul Hua <paul.hua.gm@gmail.com>
* NEWS: Mention -m[no-]fix-loongson3-llsc.
* configure.ac: Add --enable-mips-fix-loongson3-llsc.
Define DEFAULT_MIPS_FIX_LOONGSON3_LLSC.
* config.in: Regenerated.
* configure: Likewise.
* config/tc-mips.c (sync_insn, mips_fix_loongson3_llsc):
New variables.
(options): New OPTION_FIX_LOONGSON3_LLSC,
OPTION_NO_FIX_LOONGSON3_LLSC.
(md_longopts): Add -m[no-]fix-loongson3-llsc.
(md_begin): Initialize sync insn.
(fix_loongson3_llsc): New.
(append_insn): Call fix_loongson3_llsc.
(md_parse_option): Handle OPTION_FIX_LOONGSON3_LLSC,
OPTION_NO_FIX_LOONGSON3_LLSC.
(md_show_usage): Display -m[no-]fix-loongson3-llsc.
* doc/c-mips.texi: Document -m[no-]fix-loongson3-llsc,
--enable-mips-fix-loongson3-llsc=[yes|no].
2019-02-10 H.J. Lu <hongjiu.lu@intel.com>
PR gas/24165
* frags.c (frag_var_init): Pass max_chars to TC_FRAG_INIT as
max_bytes.
* config/tc-aarch64.h (TC_FRAG_INIT): Add and pass max_bytes to
aarch64_init_frag.
* /config/tc-arm.h (TC_FRAG_INIT): And and pass max_bytes to
arm_init_frag.
* config/tc-avr.h (TC_FRAG_INIT): And and ignore max_bytes.
* config/tc-ia64.h (TC_FRAG_INIT): Likewise.
* config/tc-mmix.h (TC_FRAG_INIT): Likewise.
* config/tc-nds32.h (TC_FRAG_INIT): Likewise.
* config/tc-ns32k.h (TC_FRAG_INIT): Likewise.
* config/tc-rl78.h (TC_FRAG_INIT): Likewise.
* config/tc-rx.h (TC_FRAG_INIT): Likewise.
* config/tc-score.h (TC_FRAG_INIT): Likewise.
* config/tc-tic54x.h (TC_FRAG_INIT): Likewise.
* config/tc-tic6x.h (TC_FRAG_INIT): Likewise.
* config/tc-xtensa.h (TC_FRAG_INIT): Likewise.
* config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Set to
(alignment ? ((1 << alignment) - 1) : 1)
(i386_tc_frag_data): Add max_bytes.
(TC_FRAG_INIT): Add and track max_bytes.
(HANDLE_ALIGN): Replace MAX_MEM_FOR_RS_ALIGN_CODE with
fragP->tc_frag_data.max_bytes.
* doc/internals.texi: Update TC_FRAG_TYPE with max_bytes.
2019-02-08 Jim Wilson <jimw@sifive.com>
* config/tc-riscv.c (validate_riscv_insn) <'C'>: Add 'z' support.
(riscv_ip) <'C'>: Add 'z' support.
2019-02-07 Tamar Christina <tamar.christina@arm.com>
* config/tc-arm.c (insns): Redefine THUMB_VARIANT and ARM_VARIANT for
hlt to armv1.
* testsuite/gas/arm/armv8a-automatic-hlt.d: Update TAGs
* testsuite/gas/arm/hlt.d: New test.
* testsuite/gas/arm/hlt.s: New test.
2019-02-07 Tamar Christina <tamar.christina@arm.com>
* testsuite/gas/aarch64/undefined_advsimd_armv8_3.d: New test.
* testsuite/gas/aarch64/undefined_advsimd_armv8_3.s: New test.
2019-02-07 Tamar Christina <tamar.christina@arm.com>
PR binutils/23212
* testsuite/gas/aarch64/undefined_by_elem_sz_l.s: New test.
* testsuite/gas/aarch64/undefined_by_elem_sz_l.d: New test.
2019-02-07 Eric Botcazou <ebotcazou@adacore.com>
* config/tc-visium.c (md_assemble) <mode_cad>: Align instruction on
64-bit boundaries for the GR6.
* testsuite/gas/visium/allinsn_gr6.s: Tweak.
* testsuite/gas/visium/allinsn_gr6.d: Likewise.
* testsuite/gas/visium/bra-1.d: New test.
* testsuite/gas/visium/bra-1.s: Likewise.
* testsuite/gas/visium/visium.exp: Run bra-1 test.
2019-01-31 John Darrington <john@darrington.wattle.id.au>
* config/tc-s12z.c (lex_imm): Add new argument exp_o.
(emit_reloc): New function.
(md_apply_fix): [BFD_RELOC_S12Z_OPR] Recognise that it
can be either 2 bytes or 3 bytes long.
* testsuite/gas/s12z/mov-imm-reloc.d: New file.
* testsuite/gas/s12z/mov-imm-reloc.s: New file.
* testsuite/gas/s12z/s12z.exp: Add them.
2019-01-31 John Darrington <john@darrington.wattle.id.au>
* config/tc-s12z.c (md_apply_fix): Fix incorrect limits.
* testsuite/gas/s12z/pc-rel-bad.d: New file.
* testsuite/gas/s12z/pc-rel-bad.l: New file.
* testsuite/gas/s12z/pc-rel-bad.s: New file.
* testsuite/gas/s12z/pc-rel-good.d: New file.
* testsuite/gas/s12z/pc-rel-good.s: New file.
* testsuite/gas/s12z/s12z.exp: Add them.
2019-01-31 John Darrington <john@darrington.wattle.id.au>
* config/tc-s12z.c (tfr): Emit warning if operands are the same.
* testsuite/gas/s12z/exg.d: New test case.
* testsuite/gas/s12z/exg.l: New file.
2019-01-31 John Darrington <john@darrington.wattle.id.au>
* config/tc-s12z.c (lex_opr): Add a parameter to indicate whether
immediate mode operands should be permitted.
* testsuite/s12z/imm-dest.d: New file.
* testsuite/s12z/imm-dest.l: New file.
* testsuite/s12z/imm-dest.s: New file.
* testsuite/s12z/s12z.exp: Add them.
2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com>
* config/tc-s390.c (s390_parse_cpu): New entry for arch13.
* doc/c-s390.texi: Document arch13 march option.
* testsuite/gas/s390/s390.exp: Run the arch13 related tests.
* testsuite/gas/s390/zarch-arch13.d: New test.
* testsuite/gas/s390/zarch-arch13.s: New test.
* testsuite/gas/s390/zarch-z13.d: Expect the renamed mnemonics
also for z13.
2019-01-31 Alan Modra <amodra@gmail.com>
* config/tc-alpha.c (md_apply_fix): Correct range checks for
BFD_RELOC_ALPHA_NOP, BFD_RELOC_ALPHA_LDA, BFD_RELOC_ALPHA_BSR.
* config/tc-arm.c (md_apply_fix): Use llabs rather than abs.
* config/tc-csky.c (get_macro_reg_vals): Pass s to csky_show_error.
2019-01-28 Max Filippov <jcmvbkbc@gmail.com>
* config/tc-xtensa.c (md_apply_fix): Mark fixups for constant
symbols as done in md_apply_fix.
* testsuite/gas/all/forward.d: Don't XFAIL for xtensa.
2019-01-28 Nick Clifton <nickc@redhat.com>
* po/fr.po: Updated French translation.
* po/ru.po: Updated Russian translation.
2019-01-28 Alan Modra <amodra@gmail.com>
* configure.ac (ac_checking): Set from bfd/development.sh
development variable.
* configure: Regenerate.
2019-01-25 Sudakshina Das <sudi.das@arm.com>
* config/tc-aarch64.c (warn_unpredictable_ldst): Exempt
stg, st2g, stzg and stz2g from Xt == Xn with writeback warning.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Change tests for
stg, stzg, st2g and stz2g.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
2019-01-25 Sudakshina Das <sudi.das@arm.com>
* testsuite/gas/aarch64/armv8_5-a-memtag.d: New tests for stzgm.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
2019-01-25 Sudakshina Das <sudi.das@arm.com>
Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
* config/tc-aarch64.c (parse_address_main): Remove support for
[base]! address expression.
(parse_operands): Remove support for AARCH64_OPND_ADDR_SIMPLE_2.
(warn_unpredictable_ldst): Remove support for ldstgv_indexed.
* testsuite/gas/aarch64/armv8_5-a-memtag.d: Remove tests for ldgv
and stgv.
* testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise.
* testsuite/gas/aarch64/illegal-memtag.l: Likewise.
* testsuite/gas/aarch64/illegal-memtag.s: Likewise.
2019-01-25 Wu Heng <wu.heng@zte.com.cn>
PR gas/23940
* macro.c (getstring): Check array bound before accessing.
2019-01-25 Alan Modra <amodra@gmail.com>
PR 20902
PR 24125
* read.c (stringer): Delete assertion.
2019-01-21 Nick Clifton <nickc@redhat.com>
* po/uk.po: Updated Ukranian translation.
2019-01-19 Nick Clifton <nickc@redhat.com>
* config.in: Regenerate.
* configure: Regenerate.
* po/gas.pot: Regenerate.
2018-06-24 Nick Clifton <nickc@redhat.com>
2.32 branch created.
2019-01-17 Tamar Christina <tamar.christina@arm.com>
* testsuite/gas/arm/archv6t2-1-pe.d: New test.
* testsuite/gas/arm/archv6t2-1.d: Skip pe.
* testsuite/gas/arm/csdb.d: Skip pe.
* testsuite/gas/arm/sb-thumb1-pe.d: New test.
* testsuite/gas/arm/sb-thumb1.d: Skip pe.
* testsuite/gas/arm/sb-thumb2-pe.d: New test.
* testsuite/gas/arm/sb-thumb2.d: Skip pe.
* testsuite/gas/arm/udf.d: Skip pe.
2019-01-16 Kito Cheng <kito@andestech.com>
* testsuite/gas/riscv/attribute-empty.d: New.
2019-01-16 Kito Cheng <kito@andestech.com>
Nelson Chu <nelson@andestech.com>
* config/tc-riscv.c (DEFAULT_RISCV_ATTR): Define to 0 if not defined.
(riscv_set_options): Add `arch_attr` field.
(riscv_opts): Set default value for arch_attr.
(riscv_write_out_arch_attr): New.
(riscv_set_public_attributes): Likewise.
(riscv_md_end): Likewise.
(riscv_convert_symbolic_attribute): Likewise.
(s_riscv_attribute): Likewise.
(explicit_arch_attr): Likewise.
(riscv_pseudo_table): Add .attribute to the table.
(options): Add OPTION_ARCH_ATTR and OPTION_NO_ARCH_ATTR
enumeration constants.
(md_longopts): Add `march-attr' and `mno-arch-attr' options.
(md_parse_option): Handle the new options.
(md_show_usage): Document the `march-attr' option.
* config/tc-riscv.h (md_end): Define as riscv_md_end
(riscv_md_end): Declare.
(CONVERT_SYMBOLIC_ATTRIBUTE): Define as
riscv_convert_symbolic_attribute.
(riscv_convert_symbolic_attribute): Declare.
(start_assemble): Declare.
* testsuite/gas/elf/elf.exp: Adjust test case for section2.e.
* testsuite/gas/elf/section2.e-riscv: New.
* testsuite/gas/riscv/attribute-01.d: New test
* testsuite/gas/riscv/attribute-02.d: Likewise.
* testsuite/gas/riscv/attribute-03.d: Likewise.
* testsuite/gas/riscv/attribute-04.d: Likewise.
* testsuite/gas/riscv/attribute-04.s: Likewise.
* testsuite/gas/riscv/attribute-05.d: Likewise.
* testsuite/gas/riscv/attribute-05.s: Likewise.
* testsuite/gas/riscv/attribute-06.d: Likewise.
* testsuite/gas/riscv/attribute-06.s: Likewise.
* testsuite/gas/riscv/attribute-07.d: Likewise.
* testsuite/gas/riscv/attribute-07.s: Likewise.
* testsuite/gas/riscv/attribute-08.d: Likewise.
* testsuite/gas/riscv/attribute-08.s: Likewise.
* testsuite/gas/riscv/attribute-unknown.d: Likewise.
* testsuite/gas/riscv/attribute-unknown.s: Likewise.
* testsuite/gas/riscv/empty.l: Likewise.
* doc/c-riscv.texi (.attribute): Add documentation.
* configure.ac (--enable-default-riscv-attribute): New options.
* configure: Re-generate.
* config.in: Re-generate.
2019-01-16 John Darrington <john@darrington.wattle.id.au>
* config/tc-s12z.c (lex_reg_name): Compare the length of the strings
before the contents.
* testsuite/gas/s12z/labels.d: New file.
* testsuite/gas/s12z/labels.s: New file.
* testsuite/gas/s12z/s12z.exp: Add them.
* config/tc-s12z.c (tfr): Change as_bad to as_warn.
Also fix message typo and semantics.
* config/tc-s12z.c (emit_opr): Emit BFD_RELOC_S12Z_OPR instead of
BFD_RELOC_24.
* testsuite/gas/s12z/opr-indirect-expr.d: Expect R_S12Z_OPR instead
of R_S12Z_EXT24.
2019-01-14 Srinath Parvathaneni <srinath.parvathaneni@arm.com>
* config/tc-arm.c (arm_ext_v6k_v6t2): Define.
(insns) [ARM_VARIANT]: Modified.
(insns) [THUMB_VARIANT]: To implement few ARMv6K instructions
in ARMv6T2 as well.
* testsuite/gas/arm/archv6t2-1.d: New test.
* testsuite/gas/arm/archv6t2-1.s: Likewise.
* testsuite/gas/arm/archv6t2-2.d: Likewise.
2019-01-11 Alan Modra <amodra@gmail.com>
PR 23963
* testsuite/gas/m68hc11/lbranch-dwarf2.d: Adjust for PR23963 change.
* testsuite/gas/m68hc11/opers12-dwarf2.d: Likewise.
2019-01-10 Nick Clifton <nickc@redhat.com>
PR 23963
* testsuite/gas/mips/mips16-branch-absolute-1.d: Adjust for the
fact that control characters are now displayed as escape
sequences.
* testsuite/gas/mips/mips16-e.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-0.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-1.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-delay-0.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-delay-1.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-n32-0.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-n32-1.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-n64-sym32-0.d: Likewise.
* testsuite/gas/mips/mips16-pcrel-n64-sym32-1.d: Likewise.
* testsuite/gas/mips/mips16e2@mips16-pcrel-0.d: Likewise.
* testsuite/gas/mips/mips16e2@mips16-pcrel-1.d: Likewise.
* testsuite/gas/mips/mips16e2@mips16-pcrel-delay-0.d: Likewise.
* testsuite/gas/mips/mips16e2@mips16-pcrel-delay-1.d: Likewise.
* testsuite/gas/mips/mips16e2@mips16-pcrel-n32-0.d: Likewise.
* testsuite/gas/mips/mips16e2@mips16-pcrel-n32-1.d: Likewise.
* testsuite/gas/mips/mips16e2@mips16-pcrel-n64-sym32-0.d:
Likewise.
* testsuite/gas/mips/mips16e2@mips16-pcrel-n64-sym32-1.d:
Likewise.
* testsuite/gas/mips/mipsel16-e.d: Likewise.
* testsuite/gas/mips/mipsr6@msa.d: Likewise.
* testsuite/gas/mips/mipsr6@relax-swap3.d: Likewise.
* testsuite/gas/mips/r6-64-n32.d: Likewise.
* testsuite/gas/mips/r6-64-n64.d: Likewise.
* testsuite/gas/mips/r6-n32.d: Likewise.
* testsuite/gas/mips/r6-n64.d: Likewise.
* testsuite/gas/mips/r6.d: Likewise.
* testsuite/gas/mips/tmips16-e.d: Likewise.
* testsuite/gas/mips/tmipsel16-e.d: Likewise.
* testsuite/gas/mn10300/relax.d: Likewise.
2019-01-09 John Darrington <john@darrington.wattle.id.au>
* testsuite/gas/s12z/jsr.s: New case.
* testsuite/gas/s12z/jsr.d: New case.
2019-01-09 Andrew Paprocki <andrew@ishiboo.com>
* configure: Regenerate.
2019-01-08 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/tc-aarch64.c (aarch64_cpus): Add ares.
* doc/c-aarch64.texi (-mcpu): Document ares value.
2019-01-08 Alan Modra <amodra@gmail.com>
* testsuite/gas/rx/rx.exp: Create generated test source in
current directory.
* testsuite/gas/rx/Xtod.d, * testsuite/gas/rx/abs.d,
* testsuite/gas/rx/adc.d, * testsuite/gas/rx/add.d,
* testsuite/gas/rx/and.d, * testsuite/gas/rx/bclr.d,
* testsuite/gas/rx/bcnd.d, * testsuite/gas/rx/bfmov.d,
* testsuite/gas/rx/bmcnd.d, * testsuite/gas/rx/bnot.d,
* testsuite/gas/rx/bra.d, * testsuite/gas/rx/brk.d,
* testsuite/gas/rx/bset.d, * testsuite/gas/rx/bsr.d,
* testsuite/gas/rx/btst.d, * testsuite/gas/rx/clrpsw.d,
* testsuite/gas/rx/cmp.d, * testsuite/gas/rx/dabs.d,
* testsuite/gas/rx/dadd.d, * testsuite/gas/rx/dbt.d,
* testsuite/gas/rx/dcmp.d, * testsuite/gas/rx/ddiv.d,
* testsuite/gas/rx/div.d, * testsuite/gas/rx/divu.d,
* testsuite/gas/rx/dmov.d, * testsuite/gas/rx/dmul.d,
* testsuite/gas/rx/dneg.d, * testsuite/gas/rx/dpopm.d,
* testsuite/gas/rx/dpushm.d, * testsuite/gas/rx/dround.d,
* testsuite/gas/rx/dsqrt.d, * testsuite/gas/rx/dsub.d,
* testsuite/gas/rx/dtoX.d, * testsuite/gas/rx/emaca.d,
* testsuite/gas/rx/emsba.d, * testsuite/gas/rx/emul.d,
* testsuite/gas/rx/emula.d, * testsuite/gas/rx/emulu.d,
* testsuite/gas/rx/fadd.d, * testsuite/gas/rx/fcmp.d,
* testsuite/gas/rx/fdiv.d, * testsuite/gas/rx/fmul.d,
* testsuite/gas/rx/fsqrt.d, * testsuite/gas/rx/fsub.d,
* testsuite/gas/rx/ftoi.d, * testsuite/gas/rx/ftou.d,
* testsuite/gas/rx/gprel.d, * testsuite/gas/rx/int.d,
* testsuite/gas/rx/itof.d, * testsuite/gas/rx/jmp.d,
* testsuite/gas/rx/jsr.d, * testsuite/gas/rx/machi.d,
* testsuite/gas/rx/maclh.d, * testsuite/gas/rx/maclo.d,
* testsuite/gas/rx/max.d, * testsuite/gas/rx/min.d,
* testsuite/gas/rx/mov.d, * testsuite/gas/rx/movco.d,
* testsuite/gas/rx/movli.d, * testsuite/gas/rx/movu.d,
* testsuite/gas/rx/msbhi.d, * testsuite/gas/rx/msblh.d,
* testsuite/gas/rx/msblo.d, * testsuite/gas/rx/mul.d,
* testsuite/gas/rx/mulhi.d, * testsuite/gas/rx/mullh.d,
* testsuite/gas/rx/mullo.d, * testsuite/gas/rx/mvfacgu.d,
* testsuite/gas/rx/mvfachi.d, * testsuite/gas/rx/mvfaclo.d,
* testsuite/gas/rx/mvfacmi.d, * testsuite/gas/rx/mvfc.d,
* testsuite/gas/rx/mvfcp.d, * testsuite/gas/rx/mvfdc.d,
* testsuite/gas/rx/mvfdr.d, * testsuite/gas/rx/mvtacgu.d,
* testsuite/gas/rx/mvtachi.d, * testsuite/gas/rx/mvtaclo.d,
* testsuite/gas/rx/mvtc.d, * testsuite/gas/rx/mvtcp.d,
* testsuite/gas/rx/mvtdc.d, * testsuite/gas/rx/neg.d,
* testsuite/gas/rx/nop.d, * testsuite/gas/rx/not.d,
* testsuite/gas/rx/opecp.d, * testsuite/gas/rx/or.d,
* testsuite/gas/rx/pop.d, * testsuite/gas/rx/popc.d,
* testsuite/gas/rx/popm.d, * testsuite/gas/rx/push.d,
* testsuite/gas/rx/pushc.d, * testsuite/gas/rx/pushm.d,
* testsuite/gas/rx/r-bcc.d, * testsuite/gas/rx/r-bra.d,
* testsuite/gas/rx/racl.d, * testsuite/gas/rx/racw.d,
* testsuite/gas/rx/rdacl.d, * testsuite/gas/rx/rdacw.d,
* testsuite/gas/rx/revl.d, * testsuite/gas/rx/revw.d,
* testsuite/gas/rx/rmpa.d, * testsuite/gas/rx/rolc.d,
* testsuite/gas/rx/rorc.d, * testsuite/gas/rx/rotl.d,
* testsuite/gas/rx/rotr.d, * testsuite/gas/rx/round.d,
* testsuite/gas/rx/rstr.d, * testsuite/gas/rx/rte.d,
* testsuite/gas/rx/rtfi.d, * testsuite/gas/rx/rts.d,
* testsuite/gas/rx/rtsd.d, * testsuite/gas/rx/sat.d,
* testsuite/gas/rx/satr.d, * testsuite/gas/rx/save.d,
* testsuite/gas/rx/sbb.d, * testsuite/gas/rx/sccnd.d,
* testsuite/gas/rx/scmpu.d, * testsuite/gas/rx/setpsw.d,
* testsuite/gas/rx/shar.d, * testsuite/gas/rx/shll.d,
* testsuite/gas/rx/shlr.d, * testsuite/gas/rx/smovb.d,
* testsuite/gas/rx/smovf.d, * testsuite/gas/rx/smovu.d,
* testsuite/gas/rx/sstr.d, * testsuite/gas/rx/stnz.d,
* testsuite/gas/rx/stz.d, * testsuite/gas/rx/sub.d,
* testsuite/gas/rx/suntil.d, * testsuite/gas/rx/swhile.d,
* testsuite/gas/rx/tst.d, * testsuite/gas/rx/utof.d,
* testsuite/gas/rx/wait.d, * testsuite/gas/rx/xchg.d,
* testsuite/gas/rx/xor.d: Add #source line.
2019-01-07 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
* config/tc-arm.c (arm_cpus): Add ares.
* doc/c-arm.texi (-mcpu): Document ares value.
2019-01-05 Yoshinori Sato <ysato@users.sourceforge.jp>
* config/rx-defs.h (rx_cpu_types): Add type RXV3 and RXV3FPU.
(rx_bfield): Add prototype.
(rx_post): Likewise.
* config/rx-parse.y: Add v3 instructions and Double FPU registers.
(DSIZE): Define.
(POST): Define.
(rx_check_v3): New. check v3 type.
(rx_check_dfpu): New. check have double support.
(double_condition_table): New. dcmp<cond> contiditon.
(check_condition): Multiple condition support.
(rx_lex): RXv3 instructions support.
Add parse dcmp<cond> instruction and Double FPU registers.
(immediate): Disable optimize in dmov #imm case.
(displacement): Add double displacement in dmov instraction.
* config/tc-rx.c (rx_use_conventional_section_names):
Invert default value in rx-*-linux target.
(cpu_type): Add additional ELF flags.
(cpu_type_list): Add RXv3.
(md_parse_option): Refer elf_flags from cpu_type_list.
(md_show_usage): Add rxv3 and rxv3-dfpu.
(rx_bytesT): Add post byte.
(rx_bfield): New. generate bfmov / bfmovz "imm" field.
(rx_post): New. Set instruction post byte.
(md_assemble): Add post byte.
doc/c-rx.texi: Add cpu types.
* testsuite/gas/rx/Xtod.d: New.
* testsuite/gas/rx/Xtod.sm: New.
* testsuite/gas/rx/bfmov.d: New.
* testsuite/gas/rx/bfmov.sm: New.
* testsuite/gas/rx/dabs.d: New.
* testsuite/gas/rx/dabs.sm: New.
* testsuite/gas/rx/dadd.d: New.
* testsuite/gas/rx/dadd.sm: New.
* testsuite/gas/rx/dcmp.d: New.
* testsuite/gas/rx/dcmp.sm: New.
* testsuite/gas/rx/ddiv.d: New.
* testsuite/gas/rx/ddiv.sm: New.
* testsuite/gas/rx/dmov.d: New.
* testsuite/gas/rx/dmov.sm: New.
* testsuite/gas/rx/dmul.d: New.
* testsuite/gas/rx/dmul.sm: New.
* testsuite/gas/rx/dneg.d: New.
* testsuite/gas/rx/dneg.sm: New.
* testsuite/gas/rx/dpopm.d: New.
* testsuite/gas/rx/dpopm.sm: New.
* testsuite/gas/rx/dpushm.d: New.
* testsuite/gas/rx/dpushm.sm: New.
* testsuite/gas/rx/dround.d: New.
* testsuite/gas/rx/dround.sm: New.
* testsuite/gas/rx/dsqrt.d: New.
* testsuite/gas/rx/dsqrt.sm: New.
* testsuite/gas/rx/dsub.d: New.
* testsuite/gas/rx/dsub.sm: New.
* testsuite/gas/rx/dtoX.d: New.
* testsuite/gas/rx/dtoX.sm: New.
* testsuite/gas/rx/macros.inc: Add double FPU registers.
* testsuite/gas/rx/mvfdc.d: New.
* testsuite/gas/rx/mvfdc.sm: New.
* testsuite/gas/rx/mvfdr.d: New.
* testsuite/gas/rx/mvfdr.sm: New.
* testsuite/gas/rx/mvtdc.d: New.
* testsuite/gas/rx/mvtdc.sm: New.
* testsuite/gas/rx/rstr.d: New.
* testsuite/gas/rx/rstr.sm: New.
* testsuite/gas/rx/rx.exp: Use rxv3-dfpu option.
* testsuite/gas/rx/save.d: New.
* testsuite/gas/rx/save.sm: New.
* testsuite/gas/rx/xor.d: New.
* testsuite/gas/rx/xor.sm: Add pattern.
2019-01-04 Wu Heng <wu.heng@zte.com.cn>
PR 24010
* macro.c (get_any_string): Check for end of input whilst scanning
for separators.
2019-01-04 Wu Heng <wu.heng@zte.com.cn>
PR 24009
* read.c (stringer): Fix handling of missing '>' character at end
of <...> sequence.
2019-01-01 Alan Modra <amodra@gmail.com>
Update year range in copyright notice of all files.
For older changes see ChangeLog-2018
Copyright (C) 2019 Free Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End:
Reference in New Issue View Git Blame Copy Permalink