binutils-gdb/gdb
2001-07-24 10:35:42 +00:00
..
29k-share Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
cli 2001-07-16 Elena Zannoni <ezannoni@redhat.com> 2001-07-16 14:46:34 +00:00
config 2001-07-23 Elena Zannoni <ezannoni@redhat.com> 2001-07-24 01:33:18 +00:00
doc * gdbint.texinfo (Host Definition): Remove description of 2001-07-24 10:35:42 +00:00
gdbserver * gdbserver/remote-utils.c (remote_open): Set VMIN to 1 2001-07-12 21:04:35 +00:00
mi * mi-main.c (mi_execute_command): Flush output after ``(gdb)'' 2001-07-12 05:54:48 +00:00
nindy-share * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
nlm Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
osf-share
rdi-share * rdi-share/unixcomm.c (SERIAL_PREFIX): Always provide a default. 2001-06-29 01:19:23 +00:00
testsuite * lib/gdb.exp (_gdbtk_xvfb_init): If GDB_DISPLAY is 2001-07-23 19:02:31 +00:00
tui * tuiIO.c (tui_cont_sig): Update cursor position on the screen to 2001-07-23 21:16:20 +00:00
vx-share Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
a29k-tdep.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
a68v-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
abug-rom.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
acconfig.h * i386bsd-nat.c: Include "gdb_assert.h". 2001-03-31 18:09:03 +00:00
acinclude.m4
aclocal.m4 * configure.in (AC_CHECK_FUNCS): Add setpggrp. 2001-07-23 19:21:57 +00:00
alpha-nat.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
alpha-tdep.c s/value_ptr/struct value */ 2001-07-15 20:10:02 +00:00
alphabsd-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
alphafbsd-tdep.c * config/alpha/tm-fbsd.h: Update copyright. 2001-01-25 18:41:23 +00:00
annotate.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
annotate.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
arc-tdep.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
arch-utils.c * arch-utils.c (init_frame_pc_default): New function 2001-06-16 20:00:24 +00:00
arch-utils.h * arch-utils.c (init_frame_pc_default): New function 2001-06-16 20:00:24 +00:00
arm-linux-nat.c Redefine ptid_t to be a struct rather than an int. 2001-05-15 00:03:38 +00:00
arm-linux-tdep.c s/value_ptr/struct value */ 2001-07-15 20:10:02 +00:00
arm-tdep.c s/value_ptr/struct value */ 2001-07-15 20:10:02 +00:00
ax-gdb.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
ax-gdb.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
ax-general.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
ax.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
bcache.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
bcache.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
blockframe.c * symtab.c (main_name): New function. 2001-07-07 17:19:50 +00:00
breakpoint.c * utils.c (query): Remove tui hacks; tui must use the query_hook. 2001-07-14 18:59:07 +00:00
breakpoint.h * breakpoint.c (check_duplicates): Use the breakpoint's type, not 2001-05-06 01:35:57 +00:00
buildsym.c * buildsym.c (start_subfile): Use FILENAME_CMP instead of STREQ. 2001-04-30 10:30:27 +00:00
buildsym.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
c-exp.y Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
c-lang.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
c-lang.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
c-typeprint.c (Changes from Daniel Berlin, with revisions by Jim Blandy.) 2001-04-27 00:19:09 +00:00
c-valprint.c (Changes from Daniel Berlin, with revisions by Jim Blandy.) 2001-04-27 00:19:09 +00:00
call-cmds.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
ch-exp.c * arch-utils.c (#include "gdbthread.h"): Removed. 2001-03-27 20:36:24 +00:00
ch-lang.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
ch-lang.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
ch-typeprint.c * arch-utils.c (#include "gdbthread.h"): Removed. 2001-03-27 20:36:24 +00:00
ch-valprint.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
ChangeLog 2001-07-23 Elena Zannoni <ezannoni@redhat.com> 2001-07-24 01:33:18 +00:00
ChangeLog-3.x
ChangeLog-1990 Shuffle ChangeLog files... 2001-01-12 03:44:32 +00:00
ChangeLog-1991 Shuffle ChangeLog files... 2001-01-12 03:44:32 +00:00
ChangeLog-1992 Shuffle ChangeLog files... 2001-01-12 03:44:32 +00:00
ChangeLog-1993 Shuffle ChangeLog files... 2001-01-12 03:44:32 +00:00
ChangeLog-1994 Shuffle ChangeLog files... 2001-01-12 03:44:32 +00:00
ChangeLog-1995 Shuffle ChangeLog files... 2001-01-12 03:44:32 +00:00
ChangeLog-1996 Shuffle ChangeLog files... 2001-01-12 03:44:32 +00:00
ChangeLog-1997 Revert revision 1.2. 2001-03-05 23:33:17 +00:00
ChangeLog-1998 Revert revision 1.2. 2001-03-05 23:33:17 +00:00
ChangeLog-1999 Shuffle ChangeLog files... 2001-01-12 03:44:32 +00:00
ChangeLog-2000 Shuffle ChangeLog files... 2001-01-12 03:44:32 +00:00
cli-out.c Replace: 2001-07-06 03:53:11 +00:00
cli-out.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
coff-solib.c From 2000-06-14 John Marshall <john_w_marshall@palm.com>: 2001-06-28 19:54:41 +00:00
coff-solib.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
coffread.c * coffread.c (coff_symfile_read): Parse DWARF2 info if present. 2001-07-01 10:04:58 +00:00
command.h 2001-07-16 Elena Zannoni <ezannoni@redhat.com> 2001-07-16 14:46:34 +00:00
complaints.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
complaints.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
completer.c 2001-07-15 Elena Zannoni <ezannoni@redhat.com> 2001-07-15 18:57:06 +00:00
completer.h 2001-07-15 Elena Zannoni <ezannoni@redhat.com> 2001-07-15 18:57:06 +00:00
config.in * configure.in (AC_CHECK_FUNCS): Add setpggrp. 2001-07-23 19:21:57 +00:00
configure * configure.in (AC_CHECK_FUNCS): Add setpggrp. 2001-07-23 19:21:57 +00:00
configure.host MIPS/Linux support 2001-07-10 20:41:54 +00:00
configure.in * configure.in (AC_CHECK_FUNCS): Add setpggrp. 2001-07-23 19:21:57 +00:00
configure.tgt * configure.tgt (i*86-*-pe*): New target. 2001-07-19 05:10:38 +00:00
CONTRIBUTE Change convention to ``Fix PR gdb/NNNN'' 2001-03-03 03:23:50 +00:00
COPYING
copying.awk
copying.c
core-aout.c Eliminate ARCH_NUM_REGS. 2001-03-13 23:31:14 +00:00
core-regset.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
core-sol2.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
corefile.c 2001-07-15 Elena Zannoni <ezannoni@redhat.com> 2001-07-15 18:57:06 +00:00
corelow.c Redefine ptid_t to be a struct rather than an int. 2001-05-15 00:03:38 +00:00
cp-abi.c (Changes from Daniel Berlin, with revisions by Jim Blandy.) 2001-04-27 00:19:09 +00:00
cp-abi.h * cp-abi.h: Rearrange code to put documentation comments above the 2001-06-06 22:21:15 +00:00
cp-valprint.c * cp-valprint.c: Bring formatting into line with GNU coding standards. 2001-03-22 00:58:00 +00:00
cpu32bug-rom.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
cris-tdep.c 2001-07-16 Orjan Friberg <orjanf@axis.com> 2001-07-16 08:52:41 +00:00
cxux-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
d10v-tdep.c s/value_ptr/struct value */ 2001-07-15 20:10:02 +00:00
d30v-tdep.c s/value_ptr/struct value */ 2001-07-15 20:10:02 +00:00
dbug-rom.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
dbxread.c * symtab.c (main_name): New function. 2001-07-07 17:19:50 +00:00
dcache.c * dcache.c (dcache_write_line): Fixed bugs where cache line was 2001-04-06 22:43:55 +00:00
dcache.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
defs.h * cli/cli-cmds.c (shell_escape) [GLOBAL_CURDIR]: Condition the 2001-07-16 14:13:06 +00:00
delta68-nat.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
demangle.c 2001-04-16 Daniel Berlin <dan@cgsoftware.com> 2001-04-16 14:36:16 +00:00
dink32-rom.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
dpx2-nat.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
dsrec.c * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
dst.h
dstread.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
dve3900-rom.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
dwarf2read.c * dwarf2read (dwarf2_build_psymtabs_hard): Doc fix. 2001-07-05 16:45:48 +00:00
dwarfread.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
elfread.c * symfile.c (compare_psymbols, compare_symbols): Declare using 2001-05-29 10:45:10 +00:00
environ.c * arch-utils.c (#include "gdbthread.h"): Removed. 2001-03-27 20:36:24 +00:00
environ.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
eval.c (Changes from Daniel Berlin, with revisions by Jim Blandy.) 2001-04-27 00:19:09 +00:00
event-loop.c * arch-utils.c (#include "gdbthread.h"): Removed. 2001-03-27 20:36:24 +00:00
event-loop.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
event-top.c * utils.c (query): Remove tui hacks; tui must use the query_hook. 2001-07-14 18:59:07 +00:00
event-top.h * event-top.h: Fix formatting. 2001-04-20 14:25:59 +00:00
exc_request.defs
exec.c -Wuninitialized fixes. 2001-03-22 23:58:37 +00:00
expprint.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
expression.h
f-exp.y Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
f-lang.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
f-lang.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
f-typeprint.c * arch-utils.c (#include "gdbthread.h"): Removed. 2001-03-27 20:36:24 +00:00
f-valprint.c 2001-03-06 J.T. Conklin <jtc@redback.com> 2001-03-07 02:57:08 +00:00
findvar.c * findvar.c (read_var_value): Apply value_as_pointer() to 2001-07-16 22:57:50 +00:00
fork-child.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
fr30-tdep.c s/value_ptr/struct value */ 2001-07-15 20:10:02 +00:00
frame.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
frame.h * frame.h (SIZEOF_FRAME_SAVED_REGS): Report an error if macro 2001-03-21 16:42:39 +00:00
gdb_assert.h Document pragmatics of why gdb_assert() is lowercase. 2001-03-01 17:30:05 +00:00
gdb_dirent.h
gdb_proc_service.h
gdb_regex.h
gdb_stat.h * remote-mips.c (S_IROTH): Moved definition from here. 2001-04-03 01:51:26 +00:00
gdb_string.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
gdb_thread_db.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
gdb_vfork.h Cleanup autoconfigury of vfork(). 2001-01-31 02:08:23 +00:00
gdb_wait.h
gdb-events.c * gdb-events.sh (function_list): Add tracepoint_create, 2001-06-06 14:44:42 +00:00
gdb-events.h * gdb-events.sh (function_list): Add tracepoint_create, 2001-06-06 14:44:42 +00:00
gdb-events.sh * gdb-events.sh: Fix quote escaping which was obsoleted 2001-06-07 20:18:45 +00:00
gdb-stabs.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
gdb.1 Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
gdb.gdb
gdbarch.c Clean up the D10V port so that GDB and the target program no 2001-07-10 21:24:48 +00:00
gdbarch.h Clean up the D10V port so that GDB and the target program no 2001-07-10 21:24:48 +00:00
gdbarch.sh Clean up the D10V port so that GDB and the target program no 2001-07-10 21:24:48 +00:00
gdbcmd.h 2001-07-16 Elena Zannoni <ezannoni@redhat.com> 2001-07-16 14:46:34 +00:00
gdbcore.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
gdbinit.in
gdbthread.h 2001-06-13 Michael Snyder <msnyder@redhat.com> 2001-06-13 22:56:16 +00:00
gdbtypes.c * gdbtypes.h (builtin_type_void_data_ptr): Rename 2001-07-08 20:42:15 +00:00
gdbtypes.h * gdbtypes.h (builtin_type_void_data_ptr): Rename 2001-07-08 20:42:15 +00:00
gnu-nat.c * gnu-nat.c: Include <ctype.h>. 2001-05-24 20:05:07 +00:00
gnu-nat.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
gnu-regex.c * gnu-regex.c: Eliminate obsolete check for _MSC_VER. 2001-06-10 16:25:51 +00:00
gnu-regex.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
gnu-v2-abi.c * gnu-v2-abi.c (gnuv2_virtual_fn_field): There's no need to clear 2001-05-25 17:09:48 +00:00
gnu-v3-abi.c s/abort/gdb_assert/ 2001-06-07 14:51:20 +00:00
go32-nat.c Add new DJGPP-specific commands and document them in the manual. 2001-07-23 16:10:24 +00:00
gregset.h
h8300-tdep.c * config/h8300/tm-h8300.h (FRAME_ARGS_ADDRESS): Changed to use 2001-03-16 22:34:46 +00:00
h8500-tdep.c s/value_ptr/struct value */ 2001-07-15 20:10:02 +00:00
hp300ux-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
hp-psymtab-read.c malloc() -> xmalloc. 2001-03-20 01:37:10 +00:00
hp-symtab-read.c Tweeks from RDBrown to fix compiling on HP/UX using HP's compiler. 2001-05-12 03:18:34 +00:00
hpacc-abi.c (Changes from Daniel Berlin, with revisions by Jim Blandy.) 2001-04-27 00:19:09 +00:00
hppa-tdep.c s/value_ptr/struct value */ 2001-07-15 20:10:02 +00:00
hppab-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
hppah-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
hppam3-nat.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
hpread.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
hpread.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
hpux-thread.c Consolidate save_inferior_ptid/restore_inferior_ptid implementation to 2001-05-06 22:22:03 +00:00
i386-linux-nat.c Redefine ptid_t to be a struct rather than an int. 2001-05-15 00:03:38 +00:00
i386-linux-tdep.c * i386-linux-tdep.c (i386_linux_saved_pc_after_call): Use 2001-04-17 09:38:52 +00:00
i386-nat.c 2001-04-17 Michael Snyder <msnyder@redhat.com> 2001-04-18 00:37:49 +00:00
i386-stub.c * i386-stub.c (handle_exception): Use 'T' response packet. 2001-03-01 22:45:42 +00:00
i386-tdep.c s/value_ptr/struct value */ 2001-07-15 20:10:02 +00:00
i386aix-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
i386b-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
i386bsd-nat.c * i386bsd-nat.c: Do not include <sys/sysctl.h>. 2001-07-21 20:16:44 +00:00
i386bsd-tdep.c * i386bsd-nat.c: Include <signal.h>, <stddef.h> and 2001-07-13 18:27:21 +00:00
i386fbsd-nat.c * i386bsd-nat.c: Do not include <sys/sysctl.h>. 2001-07-21 20:16:44 +00:00
i386gnu-nat.c * i386gnu-nat.c: Include "i387-nat.h". 2001-07-22 20:35:14 +00:00
i386ly-tdep.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
i386m3-nat.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
i386mach-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
i386nbsd-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
i386nbsd-tdep.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
i386v4-nat.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
i386v-nat.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
i387-nat.c (Changes from Kevin Buettner, with minor update by Don Howard.) 2001-04-27 16:06:53 +00:00
i387-nat.h * i387-nat.h: Doc Fix. 2001-03-17 23:02:10 +00:00
i387-tdep.c I'm using the obvious fix rule to commit this. 2001-07-07 00:14:06 +00:00
i960-tdep.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
ia64-aix-nat.c Create new file regcache.h. Update all uses. 2001-03-01 01:39:22 +00:00
ia64-aix-tdep.c Made changes to shared library support and added more of the support needed 2001-02-22 03:01:27 +00:00
ia64-linux-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
ia64-linux-tdep.c * ia64-linux-tdep.c (IA64_LINUX_SIGCONTEXT_OFFSET): Revise to 2001-06-01 02:22:01 +00:00
ia64-tdep.c s/value_ptr/struct value */ 2001-07-15 20:10:02 +00:00
inf-loop.c
inf-loop.h
infcmd.c * completer.c (gdb_completer_loc_break_characters): New variable. 2001-06-11 16:05:25 +00:00
inferior.h Redefine ptid_t to be a struct rather than an int. 2001-05-15 00:03:38 +00:00
inflow.c * configure.in (AC_CHECK_FUNCS): Add setpggrp. 2001-07-23 19:21:57 +00:00
infptrace.c Multi-arch CANNOT_FETCH_REGISTER() and CANNOT_STORE_REGISTER(). 2001-06-15 23:50:46 +00:00
infrun.c 2001-07-16 Elena Zannoni <ezannoni@redhat.com> 2001-07-16 14:46:34 +00:00
inftarg.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
infttrace.c From 2001-07-16 Rodney Brown <rbrown64@csc.com.au>: 2001-07-19 04:58:17 +00:00
irix4-nat.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
irix5-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
isi-xdep.c Obsolete NEWS and ISI systems (along with a few redundant m68k targets). 2001-04-17 21:20:49 +00:00
jv-exp.y Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
jv-lang.c Fix -Werror -Wuninitialized warnings. 2001-03-23 22:48:44 +00:00
jv-lang.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
jv-typeprint.c (Changes from Daniel Berlin, with revisions by Jim Blandy.) 2001-04-27 00:19:09 +00:00
jv-valprint.c Fix -Werror -Wuninitialized warnings. 2001-03-23 22:48:44 +00:00
kdb-start.c Obsolete stuff.c and kdb-start.c. 2001-03-23 00:58:48 +00:00
kod-cisco.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
kod.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
kod.h
language.c 2001-05-08 Michael Snyder <msnyder@redhat.com> 2001-05-08 21:19:43 +00:00
language.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
lin-lwp.c * lin-lwp.c (lin_lwp_wait): Avoid check for resumed LWPs if there 2001-07-13 12:49:31 +00:00
lin-thread.c Redefine ptid_t to be a struct rather than an int. 2001-05-15 00:03:38 +00:00
linespec.c (Changes from Daniel Berlin, with revisions by Jim Blandy.) 2001-04-27 00:19:09 +00:00
linespec.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
linux-thread.c * arch-utils.c (generic_prepare_to_proceed): Allow for having 2001-06-06 16:31:32 +00:00
lynx-nat.c Multi-arch CANNOT_FETCH_REGISTER() and CANNOT_STORE_REGISTER(). 2001-06-15 23:50:46 +00:00
m2-exp.y Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
m2-lang.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
m2-lang.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
m2-typeprint.c * arch-utils.c (#include "gdbthread.h"): Removed. 2001-03-27 20:36:24 +00:00
m2-valprint.c * arch-utils.c (#include "gdbthread.h"): Removed. 2001-03-27 20:36:24 +00:00
m3-nat.c * arch-utils.c (generic_prepare_to_proceed): Allow for having 2001-06-06 16:31:32 +00:00
m32r-rom.c * gnu-regex.c: Eliminate obsolete check for _MSC_VER. 2001-06-10 16:25:51 +00:00
m32r-stub.c
m32r-tdep.c s/value_ptr/struct value */ 2001-07-15 20:10:02 +00:00
m68hc11-tdep.c * m68hc11-tdep.c (m68hc11_gdbarch_init): Define int at 16-bits. 2001-07-22 12:37:02 +00:00
m68k-stub.c * config/m32r/m32r.mt (GDBSERVER_LIBS): Added ../../intl/libintl.a. 2001-01-23 19:45:12 +00:00
m68k-tdep.c Obsolete NEWS and ISI systems (along with a few redundant m68k targets). 2001-04-17 21:20:49 +00:00
m68klinux-nat.c fix m68k-linux build 2001-07-11 18:39:12 +00:00
m68knbsd-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
m68knbsd-tdep.c Create new file regcache.h. Update all uses. 2001-03-01 01:39:22 +00:00
m88k-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
m88k-tdep.c Make --target=m88k buildable again. 2001-04-02 14:47:22 +00:00
mac-defs.h
mac-gdb.r Obsolete MPW as host. 2001-04-19 23:56:14 +00:00
mac-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
mac-xdep.c Obsolete MPW as host. 2001-04-19 23:56:14 +00:00
main.c * utils.c (query): Remove tui hacks; tui must use the query_hook. 2001-07-14 18:59:07 +00:00
maint.c * maint.c: Fix typo in comment. 2001-04-11 01:01:04 +00:00
MAINTAINERS Add Michael Chansain as C++ testsuite maintainer. 2001-07-19 05:22:46 +00:00
Makefile.in * Makefile.in (ALLDEPFILES): Add m68hc11-tdep.c. 2001-07-22 12:41:49 +00:00
mcore-rom.c * mcore-rom.c: Include "serial.h". 2001-07-10 23:08:12 +00:00
mcore-tdep.c s/value_ptr/struct value */ 2001-07-15 20:10:02 +00:00
mdebugread.c * symfile.c (compare_psymbols, compare_symbols): Declare using 2001-05-29 10:45:10 +00:00
mem-break.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
memattr.c 2001-07-23 Elena Zannoni <ezannoni@redhat.com> 2001-07-23 19:53:08 +00:00
memattr.h 2001-07-04 Elena Zannoni <ezannoni@redhat.com> 2001-07-04 17:59:02 +00:00
minimon.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
minsyms.c * symfile.c (compare_psymbols, compare_symbols): Declare using 2001-05-29 10:45:10 +00:00
mips-linux-nat.c MIPS/Linux support 2001-07-10 20:41:54 +00:00
mips-linux-tdep.c * mips-linux-tdep.c (_initialize_mips_linux_tdep): Use ISO C 2001-07-13 17:34:47 +00:00
mips-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
mips-tdep.c s/value_ptr/struct value */ 2001-07-15 20:10:02 +00:00
mipsm3-nat.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
mipsread.c * symfile.c (compare_psymbols, compare_symbols): Declare using 2001-05-29 10:45:10 +00:00
mipsv4-nat.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
mn10200-tdep.c s/value_ptr/struct value */ 2001-07-15 20:10:02 +00:00
mn10300-tdep.c * mn10300-tdep.c (mn10300_extract_return_value): Mark this as 2001-05-09 05:03:01 +00:00
mon960-rom.c s/typedef serial_t/struct serial */ 2001-07-11 17:52:32 +00:00
monitor.c * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
monitor.h * remote-utils.h (struct serial): Declare as opaque. Remove 2001-07-10 21:06:34 +00:00
mpw-config.in Obsolete MPW as host. 2001-04-19 23:56:14 +00:00
mpw-make.sed Obsolete MPW as host. 2001-04-19 23:56:14 +00:00
msg_reply.defs
msg.defs
NEWS 2001-07-16 Orjan Friberg <orjanf@axis.com> 2001-07-16 16:02:48 +00:00
news-xdep.c Obsolete NEWS and ISI systems (along with a few redundant m68k targets). 2001-04-17 21:20:49 +00:00
nindy-tdep.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
nlmread.c * symtab.c (main_name): New function. 2001-07-07 17:19:50 +00:00
notify.defs
ns32k-tdep.c Obsolete ns32k-*-mach3*, ns32k-umax-*, ns32k-utek-sysv* and 2001-04-02 20:57:26 +00:00
ns32km3-nat.c Obsolete ns32k-*-mach3*, ns32k-umax-*, ns32k-utek-sysv* and 2001-04-02 20:57:26 +00:00
ns32knbsd-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
objfiles.c s/basename/lbasename/ 2001-07-05 21:32:39 +00:00
objfiles.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
ocd.c * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
ocd.h Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
op50-rom.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
os9kread.c 2001-03-06 J.T. Conklin <jtc@redback.com> 2001-03-07 02:57:08 +00:00
osfsolib.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
p-exp.y * gnu-regex.c: Eliminate obsolete check for _MSC_VER. 2001-06-10 16:25:51 +00:00
p-lang.c
p-lang.h Eliminate some uses of __STDC__. 2001-03-14 16:42:30 +00:00
p-typeprint.c * arch-utils.c (#include "gdbthread.h"): Removed. 2001-03-27 20:36:24 +00:00
p-valprint.c * arch-utils.c (#include "gdbthread.h"): Removed. 2001-03-27 20:36:24 +00:00
pa64solib.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
pa64solib.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
parse.c * arch-utils.c (#include "gdbthread.h"): Removed. 2001-03-27 20:36:24 +00:00
parser-defs.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
partial-stab.h * partial-stab.h (case N_FUN: case 'f':, case N_FUN: case 'F':) 2001-06-01 21:17:50 +00:00
ppc-bdm.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
ppc-linux-nat.c * ppc-linux-nat.c (supply_gregset): Use elf_greg_t instead 2001-07-05 23:22:04 +00:00
ppc-linux-tdep.c s/value_ptr/struct value */ 2001-07-15 20:10:02 +00:00
ppc-tdep.h
ppcbug-rom.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
ppcnbsd-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
printcmd.c * utils.c (init_page_info): Use tui_get_command_dimension. 2001-07-21 22:31:14 +00:00
proc-api.c 2001-05-10 Elena Zannoni <ezannoni@redhat.com> 2001-05-10 21:03:03 +00:00
proc-events.c Add AIX5 procfs support. 2001-03-27 02:01:11 +00:00
proc-flags.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
proc-service.c Redefine ptid_t to be a struct rather than an int. 2001-05-15 00:03:38 +00:00
proc-utils.h Add AIX5 procfs support. 2001-03-27 02:01:11 +00:00
proc-why.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
process_reply.defs
procfs.c Allocate/free space associated with saved_entryset and saved_exitset. 2001-07-07 21:55:28 +00:00
ptx4-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
README * README: Don't mention gdba.el. 2001-04-05 16:52:30 +00:00
regcache.c Multi-arch CANNOT_FETCH_REGISTER() and CANNOT_STORE_REGISTER(). 2001-06-15 23:50:46 +00:00
regcache.h Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
remote-adapt.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
remote-array.c * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
remote-bug.c * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
remote-e7000.c * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
remote-eb.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
remote-es.c * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
remote-est.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
remote-hms.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
remote-mips.c * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
remote-mm.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
remote-nindy.c * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
remote-nrom.c * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
remote-os9k.c * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
remote-rdi.c 2001-06-24 Fernando Nasser <fnasser@redhat.com> 2001-06-24 13:46:09 +00:00
remote-rdp.c * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
remote-sds.c * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
remote-sim.c * gnu-regex.c: Eliminate obsolete check for _MSC_VER. 2001-06-10 16:25:51 +00:00
remote-st.c * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
remote-udi.c * remote-udi.c (udi_wait): Make type, instead of name, of first 2001-07-08 20:21:36 +00:00
remote-utils.c * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
remote-utils.h * remote-utils.h (struct serial): Declare as opaque. Remove 2001-07-10 21:06:34 +00:00
remote-vx29k.c Create new file regcache.h. Update all uses. 2001-03-01 01:39:22 +00:00
remote-vx68.c Create new file regcache.h. Update all uses. 2001-03-01 01:39:22 +00:00
remote-vx960.c Create new file regcache.h. Update all uses. 2001-03-01 01:39:22 +00:00
remote-vx.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
remote-vxmips.c Create new file regcache.h. Update all uses. 2001-03-01 01:39:22 +00:00
remote-vxsparc.c Create new file regcache.h. Update all uses. 2001-03-01 01:39:22 +00:00
remote.c * remote.c (init_remote_ops, init_remote_cisco_ops, 2001-07-17 01:23:44 +00:00
remote.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
reply_mig_hack.awk Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
rom68k-rom.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
rs6000-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
rs6000-tdep.c s/value_ptr/struct value */ 2001-07-15 20:10:02 +00:00
saber.suppress
scm-exp.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
scm-lang.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
scm-lang.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
scm-tags.h Eliminate some uses of __STDC__. 2001-03-14 16:42:30 +00:00
scm-valprint.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
ser-e7kpc.c s/typedef serial_t/struct serial */ 2001-07-11 17:52:32 +00:00
ser-go32.c s/typedef serial_t/struct serial */ 2001-07-11 17:52:32 +00:00
ser-mac.c * ser-mac.c: Make obsolete. 2001-07-08 20:11:12 +00:00
ser-pipe.c s/typedef serial_t/struct serial */ 2001-07-11 17:52:32 +00:00
ser-tcp.c s/typedef serial_t/struct serial */ 2001-07-11 17:52:32 +00:00
ser-unix.c * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
ser-unix.h s/typedef serial_t/struct serial */ 2001-07-11 17:52:32 +00:00
serial.c * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
serial.h * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
sh3-rom.c * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
sh-stub.c
sh-tdep.c s/value_ptr/struct value */ 2001-07-15 20:10:02 +00:00
signals.c * signals.c: New file. 2001-07-19 18:09:11 +00:00
sol-thread.c Redefine ptid_t to be a struct rather than an int. 2001-05-15 00:03:38 +00:00
solib-aix5.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
solib-legacy.c Conditionally include nlist.h in solib-legacy.c for older *BSD systems. 2001-03-20 02:57:42 +00:00
solib-osf.c (osf_in_dynsym_resolve_code): Add a comment explaining the consequences of 2001-06-28 10:36:19 +00:00
solib-svr4.c 2001-07-02 Daniel Jacobowitz <drow@mvista.com> 2001-07-02 19:37:59 +00:00
solib-svr4.h Cleanup solib-svr4.c by moving legacy code out to its own file. 2001-03-10 06:17:24 +00:00
solib.c * source.c (mod_path, openp): Use HAVE_DOS_BASED_FILE_SYSTEM 2001-06-04 07:45:08 +00:00
solib.h 2001-05-14 Michael Snyder <msnyder@redhat.com> 2001-05-14 18:45:45 +00:00
solist.h * solist.h (struct so_list): Document the requirement that 2001-05-25 01:27:11 +00:00
somread.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
somsolib.c From 2001-07-16 Rodney Brown <rbrown64@csc.com.au>: 2001-07-19 04:58:17 +00:00
somsolib.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
source.c * source.c (find_source_lines): Remove tui test, must be replaced 2001-07-17 06:41:47 +00:00
source.h
sparc-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
sparc-stub.c
sparc-tdep.c s/value_ptr/struct value */ 2001-07-15 20:10:02 +00:00
sparcl-stub.c
sparcl-tdep.c * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
sparclet-rom.c * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
sparclet-stub.c
srec.h s/typedef serial_t/struct serial */ 2001-07-11 17:52:32 +00:00
stabsread.c * stabsread.c (read_cpp_abbrev): Properly construct the names of 2001-03-24 00:42:59 +00:00
stabsread.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
stack.c * utils.c (query): Remove tui hacks; tui must use the query_hook. 2001-07-14 18:59:07 +00:00
standalone.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
stop-gdb.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
stuff.c Obsolete stuff.c and kdb-start.c. 2001-03-23 00:58:48 +00:00
sun3-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
sun386-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
symfile.c 2001-07-15 Elena Zannoni <ezannoni@redhat.com> 2001-07-15 18:57:06 +00:00
symfile.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
symm-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
symm-tdep.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
symmisc.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
symtab.c * symtab.c (main_name): New function. 2001-07-07 17:19:50 +00:00
symtab.h * symtab.c (main_name): New function. 2001-07-07 17:19:50 +00:00
target.c * signals.c: New file. 2001-07-19 18:09:11 +00:00
target.h Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
terminal.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
thread-db.c * thread-db.c (enable_thread_event_reporting): Correct warning 2001-07-11 09:14:51 +00:00
thread.c 2001-06-13 Michael Snyder <msnyder@redhat.com> 2001-06-13 22:56:16 +00:00
tic80-tdep.c Obsolete tic80. 2001-04-03 21:14:37 +00:00
TODO m88k builds. Tweek remote-bug.c to include "serial.h". 2001-07-10 22:38:38 +00:00
top.c 2001-07-17 Elena Zannoni <ezannoni@redhat.com> 2001-07-17 17:25:14 +00:00
top.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
tracepoint.c * tracepoint.c (trace_command): We now have tracepoint 2001-06-14 17:09:36 +00:00
tracepoint.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
typeprint.c (Changes from Daniel Berlin, with revisions by Jim Blandy.) 2001-04-27 00:19:09 +00:00
typeprint.h
ui-file.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
ui-file.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
ui-out.c Replace: 2001-07-06 03:53:11 +00:00
ui-out.h Replace: 2001-07-06 03:53:11 +00:00
ultra3-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
ultra3-xdep.c Obsolete a29k-*-* host and a29k-*-sym1* and a29k-*-kern* targets. 2001-04-05 14:49:29 +00:00
umax-xdep.c Obsolete ns32k-*-mach3*, ns32k-umax-*, ns32k-utek-sysv* and 2001-04-02 20:57:26 +00:00
utils.c * utils.c (init_page_info): Use tui_get_command_dimension. 2001-07-21 22:31:14 +00:00
uw-thread.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
v850-tdep.c s/value_ptr/struct value */ 2001-07-15 20:10:02 +00:00
v850ice.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
valarith.c 2001-03-06 J.T. Conklin <jtc@redback.com> 2001-03-07 02:57:08 +00:00
valops.c Clean up the D10V port so that GDB and the target program no 2001-07-10 21:24:48 +00:00
valprint.c malloc() -> xmalloc. 2001-03-20 01:37:10 +00:00
valprint.h
value.h * value.h (struct value): Doc fix, and rearrange members to place 2001-05-21 20:02:22 +00:00
values.c Clean up the D10V port so that GDB and the target program no 2001-07-10 21:24:48 +00:00
varobj.c 2001-05-10 Fernando Nasser <fnasser@redhat.com> 2001-05-10 16:57:01 +00:00
varobj.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
vax-tdep.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
version.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
version.in *** empty log message *** 2001-07-24 00:00:04 +00:00
w65-tdep.c Obsolete w65-*-* target. 2001-04-03 21:56:01 +00:00
w89k-rom.c s/typedef serial_t/struct serial */ 2001-07-11 17:52:32 +00:00
win32-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
wince-stub.c
wince-stub.h
wince.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
windows-nat.c Phase 1 of the ptid_t changes. 2001-05-04 04:15:33 +00:00
wrapper.c * arch-utils.c (#include "gdbthread.h"): Removed. 2001-03-27 20:36:24 +00:00
wrapper.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
xcoffread.c * config/rs6000/tm-rs6000.h (IN_SOLIB_RETURN_TRAMPOLINE): Define. 2001-05-01 19:36:11 +00:00
xcoffsolib.c From 2001-07-16 Rodney Brown <rbrown64@csc.com.au>: 2001-07-19 04:58:17 +00:00
xcoffsolib.h Update/correct copyright notices. 2001-03-06 08:22:02 +00:00
xmodem.c * serial.h (SERIAL_ASYNC): Delete. 2001-07-15 20:34:14 +00:00
xmodem.h s/typedef serial_t/struct serial */ 2001-07-11 17:52:32 +00:00
z8k-tdep.c Update/correct copyright notices. 2001-03-06 08:22:02 +00:00

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

		     README for gdb-5.0 release
		Updated 11 May 2000 by Andrew Cagney

This is GDB, the GNU source-level debugger.
A summary of new features is in the file `NEWS'.

See the GDB home page at http://sourceware.cygnus.com/gdb/ for up to
date release information, mailing list links and archives, etc.


Unpacking and Installation -- quick overview
==========================

   In this release, the GDB debugger sources, the generic GNU include
files, the BFD ("binary file description") library, the readline
library, and other libraries all have directories of their own
underneath the gdb-5.0 directory.  The idea is that a variety of GNU
tools can share a common copy of these things.  Be aware of variation
over time--for example don't try to build gdb with a copy of bfd from
a release other than the gdb release (such as a binutils or gas
release), especially if the releases are more than a few weeks apart.
Configuration scripts and makefiles exist to cruise up and down this
directory tree and automatically build all the pieces in the right
order.

   When you unpack the gdb-5.0.tar.gz file, you'll find a directory
called `gdb-5.0', which contains:

  COPYING       config.if     install-sh     mmalloc         readline
  COPYING.LIB   config.sub    intl           move-if-change  sim
  Makefile.in   configure     libiberty      mpw-README      symlink-tree
  README        configure.in  ltconfig       mpw-build.in    texinfo
  bfd           djunpack.bat  ltmain.sh      mpw-config.in   utils
  config        etc           md5.sum        mpw-configure   ylwrap
  config-ml.in  gdb           missing        mpw-install
  config.guess  include       mkinstalldirs  opcodes

You can build GDB right in the source directory:

	cd gdb-5.0
	./configure
	make
	cp gdb/gdb /usr/local/bin/gdb	(or wherever you want)

However, we recommend that an empty directory be used instead.
This way you do not clutter your source tree with binary files
and will be able to create different builds with different 
configuration options.

You can build GDB in any empty build directory:

     
     mkdir build
     cd build
     <full path to your sources>/gdb-5.0/configure
     make

(Building GDB with DJGPP tools for MS-DOS/MS-Windows is slightly
different; see the file gdb-5.0/gdb/config/djgpp/README for details.)

   This will configure and build all the libraries as well as GDB.  If
`configure' can't determine your system type, specify one as its
argument, e.g., `./configure sun4' or `./configure decstation'.

   If you get compiler errors during this stage, see the `Reporting
Bugs' section below; there are a few known problems.

   GDB requires an ISO-C (ANSI C) compiler.  If you do not have an
ISO-C compiler for your system, you may be able to download and
install the GNU CC compiler.  It is available via anonymous FTP from
the directory `ftp://ftp.gnu.org/pub/gnu/gcc'.

   GDB can be used as a cross-debugger, running on a machine of one
type while debugging a program running on a machine of another type.
See below.


More Documentation
******************

   All the documentation for GDB comes as part of the machine-readable
distribution.  The documentation is written in Texinfo format, which
is a documentation system that uses a single source file to produce
both on-line information and a printed manual.  You can use one of the
Info formatting commands to create the on-line version of the
documentation and TeX (or `texi2roff') to typeset the printed version.

   GDB includes an already formatted copy of the on-line Info version
of this manual in the `gdb/doc' subdirectory.  The main Info file is
`gdb-5.0/gdb/doc/gdb.info', and it refers to subordinate files
matching `gdb.info*' in the same directory.  If necessary, you can
print out these files, or read them with any editor; but they are
easier to read using the `info' subsystem in GNU Emacs or the
standalone `info' program, available as part of the GNU Texinfo
distribution.

   If you want to format these Info files yourself, you need one of the
Info formatting programs, such as `texinfo-format-buffer' or
`makeinfo'.

   If you have `makeinfo' installed, and are in the top level GDB
source directory (`gdb-5.0', in the case of version 5.0), you can make
the Info file by typing:

     cd gdb/doc
     make info

   If you want to typeset and print copies of this manual, you need
TeX, a program to print its DVI output files, and `texinfo.tex', the
Texinfo definitions file.  This file is included in the GDB
distribution, in the directory `gdb-5.0/texinfo'.

   TeX is a typesetting program; it does not print files directly, but
produces output files called DVI files.  To print a typeset document,
you need a program to print DVI files.  If your system has TeX
installed, chances are it has such a program.  The precise command to
use depends on your system; `lpr -d' is common; another (for PostScript
devices) is `dvips'.  The DVI print command may require a file name
without any extension or a `.dvi' extension.

   TeX also requires a macro definitions file called `texinfo.tex'. 
This file tells TeX how to typeset a document written in Texinfo
format.  On its own, TeX cannot read, much less typeset a Texinfo file.
 `texinfo.tex' is distributed with GDB and is located in the
`gdb-5.0/texinfo' directory.

   If you have TeX and a DVI printer program installed, you can typeset
and print this manual.  First switch to the the `gdb' subdirectory of
the main source directory (for example, to `gdb-5.0/gdb') and then type:

     make gdb.dvi


Installing GDB
**************

   GDB comes with a `configure' script that automates the process of
preparing GDB for installation; you can then use `make' to build the
`gdb' program.

   The GDB distribution includes all the source code you need for GDB in
a single directory, whose name is usually composed by appending the
version number to `gdb'.

   For example, the GDB version 5.0 distribution is in the `gdb-5.0'
directory.  That directory contains:

`gdb-5.0/{COPYING,COPYING.LIB}'
     Standard GNU license files.  Please read them.

`gdb-5.0/bfd'
     source for the Binary File Descriptor library

`gdb-5.0/config*'
     script for configuring GDB, along with other support files

`gdb-5.0/gdb'
     the source specific to GDB itself

`gdb-5.0/include'
     GNU include files

`gdb-5.0/libiberty'
     source for the `-liberty' free software library

`gdb-5.0/mmalloc'
     source for the GNU memory-mapped malloc package

`gdb-5.0/opcodes'
     source for the library of opcode tables and disassemblers

`gdb-5.0/readline'
     source for the GNU command-line interface
     NOTE:  The readline library is compiled for use by GDB, but will
     not be installed on your system when "make install" is issued.

`gdb-5.0/sim'
     source for some simulators (ARM, D10V, SPARC, M32R, MIPS, PPC, V850, etc)

`gdb-5.0/intl'
     source for the GNU gettext library, for internationalization.
     This is slightly modified from the standalone gettext
     distribution you can get from GNU.

`gdb-5.0/texinfo'
     The `texinfo.tex' file, which you need in order to make a printed
     manual using TeX.

`gdb-5.0/etc'
     Coding standards, useful files for editing GDB, and other
     miscellanea.

`gdb-5.0/utils'
     A grab bag of random utilities.

   Note: the following instructions are for building GDB on Unix or
Unix-like systems.  Instructions for building with DJGPP for
MS-DOS/MS-Windows are in the file gdb/config/djgpp/README.

   The simplest way to configure and build GDB is to run `configure'
from the `gdb-VERSION-NUMBER' source directory, which in this example
is the `gdb-5.0' directory.

   First switch to the `gdb-VERSION-NUMBER' source directory if you are
not already in it; then run `configure'.

   For example:

     cd gdb-5.0
     ./configure
     make

   Running `configure' followed by `make' builds the `bfd',
`readline', `mmalloc', and `libiberty' libraries, then `gdb' itself.
The configured source files, and the binaries, are left in the
corresponding source directories.

   `configure' is a Bourne-shell (`/bin/sh') script; if your system
does not recognize this automatically when you run a different shell,
you may need to run `sh' on it explicitly:

     sh configure

   If you run `configure' from a directory that contains source
directories for multiple libraries or programs, such as the `gdb-5.0'
source directory for version 5.0, `configure' creates configuration
files for every directory level underneath (unless you tell it not to,
with the `--norecursion' option).

   You can run the `configure' script from any of the subordinate
directories in the GDB distribution, if you only want to configure that
subdirectory; but be sure to specify a path to it.

   For example, with version 5.0, type the following to configure only
the `bfd' subdirectory:

     cd gdb-5.0/bfd
     ../configure

   You can install `gdb' anywhere; it has no hardwired paths. However,
you should make sure that the shell on your path (named by the `SHELL'
environment variable) is publicly readable.  Remember that GDB uses the
shell to start your program--some systems refuse to let GDB debug child
processes whose programs are not readable.


Compiling GDB in another directory
==================================

   If you want to run GDB versions for several host or target machines,
you need a different `gdb' compiled for each combination of host and
target.  `configure' is designed to make this easy by allowing you to
generate each configuration in a separate subdirectory, rather than in
the source directory.  If your `make' program handles the `VPATH'
feature correctly (GNU `make' and SunOS 'make' are two that should),
running `make' in each of these directories builds the `gdb' program
specified there.

   To build `gdb' in a separate directory, run `configure' with the
`--srcdir' option to specify where to find the source. (You also need
to specify a path to find `configure' itself from your working
directory.  If the path to `configure' would be the same as the
argument to `--srcdir', you can leave out the `--srcdir' option; it
will be assumed.)

   For example, with version 5.0, you can build GDB in a separate
directory for a Sun 4 like this:

     cd gdb-5.0
     mkdir ../gdb-sun4
     cd ../gdb-sun4
     ../gdb-5.0/configure
     make

   When `configure' builds a configuration using a remote source
directory, it creates a tree for the binaries with the same structure
(and using the same names) as the tree under the source directory.  In
the example, you'd find the Sun 4 library `libiberty.a' in the
directory `gdb-sun4/libiberty', and GDB itself in `gdb-sun4/gdb'.

   One popular reason to build several GDB configurations in separate
directories is to configure GDB for cross-compiling (where GDB runs on
one machine--the host--while debugging programs that run on another
machine--the target).  You specify a cross-debugging target by giving
the `--target=TARGET' option to `configure'.

   When you run `make' to build a program or library, you must run it
in a configured directory--whatever directory you were in when you
called `configure' (or one of its subdirectories).

   The `Makefile' that `configure' generates in each source directory
also runs recursively.  If you type `make' in a source directory such
as `gdb-5.0' (or in a separate configured directory configured with
`--srcdir=PATH/gdb-5.0'), you will build all the required libraries,
and then build GDB.

   When you have multiple hosts or targets configured in separate
directories, you can run `make' on them in parallel (for example, if
they are NFS-mounted on each of the hosts); they will not interfere
with each other.


Specifying names for hosts and targets
======================================

   The specifications used for hosts and targets in the `configure'
script are based on a three-part naming scheme, but some short
predefined aliases are also supported.  The full naming scheme encodes
three pieces of information in the following pattern:

     ARCHITECTURE-VENDOR-OS

   For example, you can use the alias `sun4' as a HOST argument or in a
`--target=TARGET' option.  The equivalent full name is
`sparc-sun-sunos4'.

   The `configure' script accompanying GDB does not provide any query
facility to list all supported host and target names or aliases. 
`configure' calls the Bourne shell script `config.sub' to map
abbreviations to full names; you can read the script, if you wish, or
you can use it to test your guesses on abbreviations--for example:

     % sh config.sub sun4
     sparc-sun-sunos4.1.1
     % sh config.sub sun3
     m68k-sun-sunos4.1.1
     % sh config.sub decstation
     mips-dec-ultrix4.2
     % sh config.sub hp300bsd
     m68k-hp-bsd
     % sh config.sub i386v
     i386-pc-sysv
     % sh config.sub i786v
     Invalid configuration `i786v': machine `i786v' not recognized

`config.sub' is also distributed in the GDB source directory
(`gdb-5.0', for version 5.0).


`configure' options
===================

   Here is a summary of the `configure' options and arguments that are
most often useful for building GDB.  `configure' also has several other
options not listed here.  *note : (configure.info)What Configure Does,
for a full explanation of `configure'.

     configure [--help]
               [--prefix=DIR]
               [--srcdir=PATH]
               [--norecursion] [--rm]
	       [--enable-build-warnings]
               [--target=TARGET]
	       [--host=HOST]
	       [HOST]

You may introduce options with a single `-' rather than `--' if you
prefer; but you may abbreviate option names if you use `--'.

`--help'
     Display a quick summary of how to invoke `configure'.

`-prefix=DIR'
     Configure the source to install programs and files under directory
     `DIR'.

`--srcdir=PATH'
     *Warning: using this option requires GNU `make', or another `make'
     that compatibly implements the `VPATH' feature.*
     Use this option to make configurations in directories separate
     from the GDB source directories.  Among other things, you can use
     this to build (or maintain) several configurations simultaneously,
     in separate directories.  `configure' writes configuration
     specific files in the current directory, but arranges for them to
     use the source in the directory PATH.  `configure' will create
     directories under the working directory in parallel to the source
     directories below PATH.

`--norecursion'
     Configure only the directory level where `configure' is executed;
     do not propagate configuration to subdirectories.

`--rm'
     Remove the configuration that the other arguments specify.

`--enable-build-warnings'
     When building the GDB sources, ask the compiler to warn about any
     code which looks even vaguely suspicious.  You should only using
     this feature if you're compiling with GNU CC.  It passes the
     following flags:
	-Wimplicit
	-Wreturn-type
	-Wcomment
	-Wtrigraphs
	-Wformat
	-Wparentheses
	-Wpointer-arith

`--target=TARGET'
     Configure GDB for cross-debugging programs running on the specified
     TARGET.  Without this option, GDB is configured to debug programs
     that run on the same machine (HOST) as GDB itself.

     There is no convenient way to generate a list of all available
     targets.

`--host=HOST'
     Configure GDB to run on the specified HOST.

     There is no convenient way to generate a list of all available
     hosts.

`HOST ...'
     Same as `--host=HOST'.  If you omit this, GDB will guess; it's
     quite accurate.

`configure' accepts other options, for compatibility with configuring
other GNU tools recursively; but these are the only options that affect
GDB or its supporting libraries.


Languages other than C
=======================

See the GDB manual (gdb/doc/gdb.texinfo) for information on this.


Kernel debugging
=================

   Remote debugging over serial lines works fine, but the kernel
debugging code in here has not been tested in years.  Van Jacobson has
better kernel debugging, but the UC lawyers won't let FSF have it.


Remote debugging
=================

   The files m68k-stub.c, i386-stub.c, and sparc-stub.c are examples
of remote stubs to be used with remote.c.  They are designed to run
standalone on an m68k, i386, or SPARC cpu and communicate properly
with the remote.c stub over a serial line.

   The directory gdb/gdbserver/ contains `gdbserver', a program that
allows remote debugging for Unix applications.  gdbserver is only
supported for some native configurations, including Sun 3, Sun 4, and
Linux.

   There are a number of remote interfaces for talking to existing ROM
monitors and other hardware:

	remote-adapt.c	 AMD 29000 "Adapt"
	remote-array.c   Array Tech RAID controller
	remote-bug.c	 Motorola BUG monitor
	remote-e7000.c	 Hitachi E7000 ICE
	remote-eb.c	 AMD 29000 "EBMON"
	remote-es.c	 Ericsson 1800 monitor
	remote-est.c	 EST emulator
	remote-hms.c	 Hitachi Micro Systems H8/300 monitor
	remote-mips.c	 MIPS remote debugging protocol
	remote-mm.c	 AMD 29000 "minimon"
	remote-nindy.c   Intel 960 "Nindy"
	remote-nrom.c	 NetROM ROM emulator
	remote-os9k.c	 PC running OS/9000
	remote-rdi.c	 ARM with Angel monitor
	remote-rdp.c	 ARM with Demon monitor
	remote-sds.c	 PowerPC SDS monitor
	remote-sim.c	 Generalized simulator protocol
	remote-st.c	 Tandem ST-2000 monitor
	remote-udi.c	 AMD 29000 using the AMD "Universal Debug Interface"
	remote-vx.c	 VxWorks realtime kernel

   Remote-vx.c and the vx-share subdirectory contain a remote
interface for the VxWorks realtime kernel, which communicates over TCP
using the Sun RPC library.  This would be a useful starting point for
other remote- via-ethernet back ends.

   Remote-udi.c and the 29k-share subdirectory contain a remote
interface for AMD 29000 programs, which uses the AMD "Universal Debug
Interface".  This allows GDB to talk to software simulators,
emulators, and/or bare hardware boards, via network or serial
interfaces.  Note that GDB only provides an interface that speaks UDI,
not a complete solution.  You will need something on the other end
that also speaks UDI.


Reporting Bugs
===============

   The correct address for reporting bugs found in gdb is
"bug-gdb@gnu.org".  Please email all bugs, and all requests for help
with GDB, to that address.  Please include the GDB version number
(e.g., gdb-5.0), and how you configured it (e.g., "sun4" or "mach386
host, i586-intel-synopsys target").  Since GDB now supports so many
different configurations, it is important that you be precise about
this.  If at all possible, you should include the actual banner that
GDB prints when it starts up, or failing that, the actual configure
command that you used when configuring GDB.

   For more information on how/whether to report bugs, see the GDB
Bugs section of the GDB manual (gdb/doc/gdb.texinfo) or the
gdb/CONTRIBUTE file.

Known bugs:

  * Under Ultrix 4.2 (DECstation-3100) or Alphas under OSF/1, we have
    seen problems with backtraces after interrupting the inferior out
    of a read().  The problem is caused by ptrace() returning an
    incorrect value for the frame pointer register (register 15 or
    30).  As far as we can tell, this is a kernel problem.  Any help
    with this would be greatly appreciated.

  * Under Ultrix 4.4 (DECstation-3100), setting the TERMCAP environment
    variable to a string without a trailing ':' can cause GDB to dump
    core upon startup.  Although the core file makes it look as though
    GDB code failed, the crash actually occurs within a call to the
    termcap library function tgetent().  The problem can be solved by
    using the GNU Termcap library.

    Alphas running OSF/1 (versions 1.0 through 2.1) have the same buggy
    termcap code, but GDB behaves strangely rather than crashing.

  * On DECstations there are warnings about shift counts out of range in
    various BFD modules.  None of them is a cause for alarm, they are actually
    a result of bugs in the DECstation compiler.

  * Notes for the DEC Alpha using OSF/1:
    The debugging output of native cc has two known problems; we view these
    as compiler bugs.
    The linker miscompacts symbol tables, which causes gdb to confuse the
    type of variables or results in `struct <illegal>' type outputs.
    dbx has the same problems with those executables.  A workaround is to
    specify -Wl,-b when linking, but that will increase the executable size
    considerably.
    If a structure has incomplete type in one file (e.g., "struct foo *"
    without a definition for "struct foo"), gdb will be unable to find the
    structure definition from another file.
    It has been reported that the Ultrix 4.3A compiler on decstations has the
    same problems.

  * Notes for Solaris 2.x, using the SPARCworks cc compiler:
    You have to compile your program with the -xs option of the SPARCworks
    compiler to be able to debug your program with gdb.
    Under Solaris 2.3 you also need patch 101409-03 (Jumbo linker patch).
    Under Solaris 2.2, if you have patch 101052 installed, make sure
    that it is at least at revision 101052-06.

  * Under Irix 5 for SGIs, you must have installed the `compiler_dev.hdr'
    subsystem that is on the IDO CD, otherwise you will get complaints
    that certain files such as `/usr/include/syms.h' cannot be found.

  * Under Irix 6 you must build with GCC.  The vendor compiler reports
    as errors certain assignments that GCC considers to be warnings.
  
   GDB can produce warnings about symbols that it does not understand.
By default, these warnings are disabled.  You can enable them by
executing `set complaint 10' (which you can put in your ~/.gdbinit if
you like).  I recommend doing this if you are working on a compiler,
assembler, linker, or GDB, since it will point out problems that you
may be able to fix.  Warnings produced during symbol reading indicate
some mismatch between the object file and GDB's symbol reading code.
In many cases, it's a mismatch between the specs for the object file
format, and what the compiler actually outputs or the debugger
actually understands.


Graphical interface to GDB -- X Windows, MS Windows
==========================

   Several graphical interfaces to GDB are available.  You should
check:

	http://sourceware.cygnus.com/gdb/#gui

for an up-to-date list.

   Emacs users will very likely enjoy the Grand Unified Debugger mode;
try typing `M-x gdb RET'.


Writing Code for GDB
=====================

   There is a lot of information about writing code for GDB in the
internals manual, distributed with GDB in gdb/doc/gdbint.texinfo.  You
can read it by hand, print it by using TeX and texinfo, or process it
into an `info' file for use with Emacs' info mode or the standalone
`info' program.

   If you are pondering writing anything but a short patch, especially
take note of the information about copyrights in the node Submitting
Patches.  It can take quite a while to get all the paperwork done, so
we encourage you to start that process as soon as you decide you are
planning to work on something, or at least well ahead of when you
think you will be ready to submit the patches.


GDB Testsuite
=============

   Included with the GDB distribution is a DejaGNU based testsuite
that can either be used to test your newly built GDB, or for
regression testing a GDB with local modifications.

   Running the testsuite requires the prior installation of DejaGNU,
which is generally available via ftp.  The directory
ftp://sourceware.cygnus.com/pub/dejagnu/ will contain a recent
snapshot.  Once DejaGNU is installed, you can run the tests in one of
the following ways:

  (1)	cd gdb-5.0
	make check-gdb

or

  (2)	cd gdb-5.0/gdb
	make check

or

  (3)	cd gdb-5.0/gdb/testsuite
	make site.exp	(builds the site specific file)
	runtest -tool gdb GDB=../gdb    (or GDB=<somepath> as appropriate)

The last method gives you slightly more control in case of problems
with building one or more test executables or if you are using the
testsuite `standalone', without it being part of the GDB source tree.

See the DejaGNU documentation for further details.


(this is for editing this file with GNU emacs)
Local Variables:
mode: text
End: