mirror/binutils-gdb
2
0
Fork 0
mirror of https://sourceware.org/git/binutils-gdb.git synced 2024-12-09 04:21:49 +08:00
Code Issues Packages Projects Releases Wiki Activity
2e913166b1
binutils-gdb/sim/ppc/configure
Michael Meissner 2e913166b1 7/30 release from Andrew
1996-08-06 15:55:32 +00:00

3083 lines
90 KiB
Bash
Executable File
Raw Blame History

#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.10
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
# Defaults:
ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
--enable-sim-cflags=opts Extra CFLAGS for use in building simulator"
ac_help="$ac_help
--enable-sim-warnings=opts Extra CFLAGS for turning on compiler warnings except for idecode.o, semantics.o and psim.o"
ac_help="$ac_help
--enable-sim-line-nr=opts Generate extra CPP code that references source rather than generated code"
ac_help="$ac_help
--enable-sim-config=file Override default config file"
ac_help="$ac_help
--enable-sim-opcode=which Override default opcode lookup."
ac_help="$ac_help
--enable-sim-switch Use a switch instead of a table for instruction call."
ac_help="$ac_help
--enable-sim-duplicate Expand (duplicate) semantic functions."
ac_help="$ac_help
--enable-sim-jump Jump between semantic code (instead of call/return)."
ac_help="$ac_help
--enable-sim-filter=rule Specify filter rules."
ac_help="$ac_help
--enable-sim-icache=size Specify instruction cache size."
ac_help="$ac_help
--enable-sim-hardware=list Specify the hardware to be included in the build."
ac_help="$ac_help
--enable-sim-packages=list Specify the packages to be included in the build."
ac_help="$ac_help
--enable-sim-inline=inlines Specify which functions should be inlined."
ac_help="$ac_help
--enable-sim-bswap Use the BSWAP instruction on Intel 486s and Pentiums."
ac_help="$ac_help
--enable-sim-endian=endian Specify target byte endian orientation."
ac_help="$ac_help
--enable-sim-regparm=nr-parm Pass parameters in registers instead of on the stack - x86/GCC specific."
ac_help="$ac_help
--enable-sim-stdcall=type Use an alternative function call/return mechanism - x86/GCC specific."
ac_help="$ac_help
--enable-sim-hostendain=end Specify host byte endian orientation."
ac_help="$ac_help
--enable-sim-smp=n Specify number of processors to configure for."
ac_help="$ac_help
--enable-sim-xor-endian=n Specify number bytes involved in PowerPC XOR bi-endian mode (default 8)."
ac_help="$ac_help
--enable-sim-bitsize=n Specify target bitsize (32 or 64)."
ac_help="$ac_help
--enable-sim-hostbitsize=32|64 Specify host bitsize (32 or 64)."
ac_help="$ac_help
--enable-sim-env=env Specify target environment (operating, virtual, user)."
ac_help="$ac_help
--enable-sim-timebase Specify whether the PPC timebase is supported."
ac_help="$ac_help
--enable-sim-alignment=align Specify strict or nonstrict alignment."
ac_help="$ac_help
--enable-sim-trace Specify whether tracing is supported."
ac_help="$ac_help
--enable-sim-assert Specify whether to perform random assertions."
ac_help="$ac_help
--enable-sim-reserved-bits Specify whether to check reserved bits in instruction."
ac_help="$ac_help
--enable-sim-float Specify whether to use host floating point or simulate."
ac_help="$ac_help
--enable-sim-monitor=mon Specify whether to enable monitoring events."
ac_help="$ac_help
--enable-sim-model=which Specify PowerPC to model."
ac_help="$ac_help
--enable-sim-default-model=which Specify default PowerPC to model."
ac_help="$ac_help
--enable-sim-model-issue Specify whether to simulate model specific actions"
ac_help="$ac_help
--enable-sim-stdio Specify whether to use stdio for console input/output."
# Initialize some variables set by options.
# The variables have the same names as the options, with
# dashes changed to underlines.
build=NONE
cache_file=./config.cache
exec_prefix=NONE
host=NONE
no_create=
nonopt=NONE
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
target=NONE
verbose=
x_includes=NONE
x_libraries=NONE
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datadir='${prefix}/share'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
libdir='${exec_prefix}/lib'
includedir='${prefix}/include'
oldincludedir='/usr/include'
infodir='${prefix}/info'
mandir='${prefix}/man'
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
ac_prev=
for ac_option
do
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval "$ac_prev=\$ac_option"
ac_prev=
continue
fi
case "$ac_option" in
-*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
*) ac_optarg= ;;
esac
# Accept the important Cygnus configure options, so we can diagnose typos.
case "$ac_option" in
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
bindir="$ac_optarg" ;;
-build | --build | --buil | --bui | --bu)
ac_prev=build ;;
-build=* | --build=* | --buil=* | --bui=* | --bu=*)
build="$ac_optarg" ;;
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
cache_file="$ac_optarg" ;;
-datadir | --datadir | --datadi | --datad | --data | --dat | --da)
ac_prev=datadir ;;
-datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
| --da=*)
datadir="$ac_optarg" ;;
-disable-* | --disable-*)
ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
fi
ac_feature=`echo $ac_feature| sed 's/-/_/g'`
eval "enable_${ac_feature}=no" ;;
-enable-* | --enable-*)
ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
{ echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
fi
ac_feature=`echo $ac_feature| sed 's/-/_/g'`
case "$ac_option" in
*=*) ;;
*) ac_optarg=yes ;;
esac
eval "enable_${ac_feature}='$ac_optarg'" ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
| --exec | --exe | --ex)
ac_prev=exec_prefix ;;
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
| --exec=* | --exe=* | --ex=*)
exec_prefix="$ac_optarg" ;;
-gas | --gas | --ga | --g)
# Obsolete; use --with-gas.
with_gas=yes ;;
-help | --help | --hel | --he)
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat << EOF
Usage: configure [options] [host]
Options: [defaults in brackets after descriptions]
Configuration:
--cache-file=FILE cache test results in FILE
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[same as prefix]
--bindir=DIR user executables in DIR [EPREFIX/bin]
--sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
--libexecdir=DIR program executables in DIR [EPREFIX/libexec]
--datadir=DIR read-only architecture-independent data in DIR
[PREFIX/share]
--sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data in DIR
[PREFIX/com]
--localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
--libdir=DIR object code libraries in DIR [EPREFIX/lib]
--includedir=DIR C header files in DIR [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
--infodir=DIR info documentation in DIR [PREFIX/info]
--mandir=DIR man documentation in DIR [PREFIX/man]
--srcdir=DIR find the sources in DIR [configure dir or ..]
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM
run sed PROGRAM on installed program names
EOF
cat << EOF
Host type:
--build=BUILD configure for building on BUILD [BUILD=HOST]
--host=HOST configure for HOST [guessed]
--target=TARGET configure for TARGET [TARGET=HOST]
Features and packages:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--x-includes=DIR X include files are in DIR
--x-libraries=DIR X library files are in DIR
EOF
if test -n "$ac_help"; then
echo "--enable and --with options recognized:$ac_help"
fi
exit 0 ;;
-host | --host | --hos | --ho)
ac_prev=host ;;
-host=* | --host=* | --hos=* | --ho=*)
host="$ac_optarg" ;;
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
| --includ=* | --inclu=* | --incl=* | --inc=*)
includedir="$ac_optarg" ;;
-infodir | --infodir | --infodi | --infod | --info | --inf)
ac_prev=infodir ;;
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
infodir="$ac_optarg" ;;
-libdir | --libdir | --libdi | --libd)
ac_prev=libdir ;;
-libdir=* | --libdir=* | --libdi=* | --libd=*)
libdir="$ac_optarg" ;;
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
| --libexe | --libex | --libe)
ac_prev=libexecdir ;;
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
| --libexe=* | --libex=* | --libe=*)
libexecdir="$ac_optarg" ;;
-localstatedir | --localstatedir | --localstatedi | --localstated \
| --localstate | --localstat | --localsta | --localst \
| --locals | --local | --loca | --loc | --lo)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
| --localstate=* | --localstat=* | --localsta=* | --localst=* \
| --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
localstatedir="$ac_optarg" ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
ac_prev=mandir ;;
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
mandir="$ac_optarg" ;;
-nfp | --nfp | --nf)
# Obsolete; use --without-fp.
with_fp=no ;;
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c)
no_create=yes ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
no_recursion=yes ;;
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
| --oldin | --oldi | --old | --ol | --o)
ac_prev=oldincludedir ;;
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
oldincludedir="$ac_optarg" ;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
prefix="$ac_optarg" ;;
-program-prefix | --program-prefix | --program-prefi | --program-pref \
| --program-pre | --program-pr | --program-p)
ac_prev=program_prefix ;;
-program-prefix=* | --program-prefix=* | --program-prefi=* \
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
program_prefix="$ac_optarg" ;;
-program-suffix | --program-suffix | --program-suffi | --program-suff \
| --program-suf | --program-su | --program-s)
ac_prev=program_suffix ;;
-program-suffix=* | --program-suffix=* | --program-suffi=* \
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
program_suffix="$ac_optarg" ;;
-program-transform-name | --program-transform-name \
| --program-transform-nam | --program-transform-na \
| --program-transform-n | --program-transform- \
| --program-transform | --program-transfor \
| --program-transfo | --program-transf \
| --program-trans | --program-tran \
| --progr-tra | --program-tr | --program-t)
ac_prev=program_transform_name ;;
-program-transform-name=* | --program-transform-name=* \
| --program-transform-nam=* | --program-transform-na=* \
| --program-transform-n=* | --program-transform-=* \
| --program-transform=* | --program-transfor=* \
| --program-transfo=* | --program-transf=* \
| --program-trans=* | --program-tran=* \
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name="$ac_optarg" ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
| --sbi=* | --sb=*)
sbindir="$ac_optarg" ;;
-sharedstatedir | --sharedstatedir | --sharedstatedi \
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \
| --sharedst | --shareds | --shared | --share | --shar \
| --sha | --sh)
ac_prev=sharedstatedir ;;
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
| --sha=* | --sh=*)
sharedstatedir="$ac_optarg" ;;
-site | --site | --sit)
ac_prev=site ;;
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir="$ac_optarg" ;;
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
| --syscon | --sysco | --sysc | --sys | --sy)
ac_prev=sysconfdir ;;
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
sysconfdir="$ac_optarg" ;;
-target | --target | --targe | --targ | --tar | --ta | --t)
ac_prev=target ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
target="$ac_optarg" ;;
-v | -verbose | --verbose | --verbos | --verbo | --verb)
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
echo "configure generated by autoconf version 2.10"
exit 0 ;;
-with-* | --with-*)
ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
fi
ac_package=`echo $ac_package| sed 's/-/_/g'`
case "$ac_option" in
*=*) ;;
*) ac_optarg=yes ;;
esac
eval "with_${ac_package}='$ac_optarg'" ;;
-without-* | --without-*)
ac_package=`echo $ac_option|sed -e 's/-*without-//'`
# Reject names that are not valid shell variable names.
if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
{ echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
fi
ac_package=`echo $ac_package| sed 's/-/_/g'`
eval "with_${ac_package}=no" ;;
--x)
# Obsolete; use --with-x.
with_x=yes ;;
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
| --x-incl | --x-inc | --x-in | --x-i)
ac_prev=x_includes ;;
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
x_includes="$ac_optarg" ;;
-x-libraries | --x-libraries | --x-librarie | --x-librari \
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
ac_prev=x_libraries ;;
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries="$ac_optarg" ;;
-*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
;;
*)
if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
echo "configure: warning: $ac_option: invalid host type" 1>&2
fi
if test "x$nonopt" != xNONE; then
{ echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
fi
nonopt="$ac_option"
;;
esac
done
if test -n "$ac_prev"; then
{ echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
fi
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
# File descriptor usage:
# 0 standard input
# 1 file creation
# 2 errors and warnings
# 3 some systems may open it to /dev/tty
# 4 used on the Kubota Titan
# 6 checking for... messages and results
# 5 compiler messages saved in config.log
if test "$silent" = yes; then
exec 6>/dev/null
else
exec 6>&1
fi
exec 5>./config.log
echo "\
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
" 1>&5
# Strip out --no-create and --no-recursion so they do not pile up.
# Also quote any args containing shell metacharacters.
ac_configure_args=
for ac_arg
do
case "$ac_arg" in
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c) ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
*" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
ac_configure_args="$ac_configure_args '$ac_arg'" ;;
*) ac_configure_args="$ac_configure_args $ac_arg" ;;
esac
done
# NLS nuisances.
# Only set LANG and LC_ALL to C if already set.
# These must not be set unconditionally because not all systems understand
# e.g. LANG=C (notably SCO).
if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
if test "${LANG+set}" = set; then LANG=C; export LANG; fi
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
# AIX cpp loses on an empty file, so make sure it contains at least a newline.
echo > confdefs.h
# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
ac_unique_file=Makefile.in
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then its parent.
ac_prog=$0
ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
srcdir=$ac_confdir
if test ! -r $srcdir/$ac_unique_file; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
if test ! -r $srcdir/$ac_unique_file; then
if test "$ac_srcdir_defaulted" = yes; then
{ echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
else
{ echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
fi
fi
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
if test -z "$CONFIG_SITE"; then
if test "x$prefix" != xNONE; then
CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
else
CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
echo "loading site script $ac_site_file"
. "$ac_site_file"
fi
done
if test -r "$cache_file"; then
echo "loading cache $cache_file"
. $cache_file
else
echo "creating cache $cache_file"
> $cache_file
fi
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
ac_n= ac_c='
' ac_t=' '
else
ac_n=-n ac_c= ac_t=
fi
else
ac_n= ac_c='\c' ac_t=
fi
ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
elif test -f $ac_dir/install.sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
fi
done
if test -z "$ac_aux_dir"; then
{ echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
/|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
for ac_prog in ginstall installbsd scoinst install; do
if test -f $ac_dir/$ac_prog; then
if test $ac_prog = install &&
grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
# OSF/1 installbsd also uses dspmsg, but is usable.
:
else
ac_cv_path_install="$ac_dir/$ac_prog -c"
break 2
fi
fi
done
;;
esac
done
IFS="$ac_save_ifs"
fi
if test "${ac_cv_path_install+set}" = set; then
INSTALL="$ac_cv_path_install"
else
# As a last resort, use the slow shell script. We don't cache a
# path for INSTALL within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the path is relative.
INSTALL="$ac_install_sh"
fi
fi
echo "$ac_t""$INSTALL" 1>&6
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_CC="gcc"
break
fi
done
IFS="$ac_save_ifs"
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
echo "$ac_t""$CC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
ac_prog_rejected=no
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
fi
ac_cv_prog_CC="cc"
break
fi
done
IFS="$ac_save_ifs"
if test $ac_prog_rejected = yes; then
# We found a bogon in the path, so make sure we never use it.
set dummy $ac_cv_prog_CC
shift
if test $# -gt 0; then
# We chose a different compiler from the bogus one.
# However, it has the same basename, so the bogon will be chosen
# first if we set CC to just the basename; use the full file name.
shift
set dummy "$ac_dir/$ac_word" "$@"
shift
ac_cv_prog_CC="$@"
fi
fi
fi
fi
CC="$ac_cv_prog_CC"
if test -n "$CC"; then
echo "$ac_t""$CC" 1>&6
else
echo "$ac_t""no" 1>&6
fi
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.c <<EOF
#ifdef __GNUC__
yes;
#endif
EOF
if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:749: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
fi
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
if test $ac_cv_prog_gcc = yes; then
GCC=yes
if test "${CFLAGS+set}" != set; then
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
ac_cv_prog_gcc_g=yes
else
ac_cv_prog_gcc_g=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6
if test $ac_cv_prog_gcc_g = yes; then
CFLAGS="-g -O"
else
CFLAGS="-O"
fi
fi
else
GCC=
test "${CFLAGS+set}" = set || CFLAGS="-g"
fi
# Put a plausible default for CC_FOR_BUILD in Makefile.
# If we cannot run a trivial program, we must be cross compiling.
echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
ac_cv_c_cross=yes
else
cat > conftest.$ac_ext <<EOF
#line 797 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
{ (eval echo configure:801: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }
if test -s conftest && (./conftest; exit) 2>/dev/null; then
ac_cv_c_cross=no
else
ac_cv_c_cross=yes
fi
fi
rm -fr conftest*
fi
echo "$ac_t""$ac_cv_c_cross" 1>&6
cross_compiling=$ac_cv_c_cross
if test "x$cross_compiling" = "xno"; then
CC_FOR_BUILD='$(CC)'
else
CC_FOR_BUILD=gcc
fi
# Check whether --enable-sim-cflags or --disable-sim-cflags was given.
if test "${enable_sim_cflags+set}" = set; then
enableval="$enable_sim_cflags"
case "${enableval}" in
yes) sim_cflags="-O2 -fomit-frame-pointer";;
no) sim_cflags="";;
*) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac
if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then
echo "Setting sim cflags = $sim_cflags" 6>&1
fi
else
sim_cflags=""
fi
# Check whether --enable-sim-warnings or --disable-sim-warnings was given.
if test "${enable_sim_warnings+set}" = set; then
enableval="$enable_sim_warnings"
case "${enableval}" in
yes) sim_warnings="-Werror -Wall -Wpointer-arith -Wmissing-prototypes";;
no) sim_warnings="-w";;
*) sim_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac
if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then
echo "Setting warning flags = $sim_warnings" 6>&1
fi
else
sim_warnings=""
fi
# Check whether --enable-sim-line-nr or --disable-sim-line-nr was given.
if test "${enable_sim_line_nr+set}" = set; then
enableval="$enable_sim_line_nr"
case "${enableval}" in
yes) sim_line_nr="";;
no) sim_line_nr="-L";;
*) { echo "configure: error: "--enable-sim-line-nr does not take a value"" 1>&2; exit 1; }; sim_line_nr="";;
esac
if test x"$silent" != x"yes" && test x"$sim_line_nr" != x""; then
echo "Setting warning flags = $sim_line_nr" 6>&1
fi
else
sim_line_nr=""
fi
# Check whether --enable-sim-config or --disable-sim-config was given.
if test "${enable_sim_config+set}" = set; then
enableval="$enable_sim_config"
case "${enableval}" in
yes|no) { echo "configure: error: "No value supplied for --enable-sim-config=file"" 1>&2; exit 1; };;
*) if test -f "${srcdir}/${enableval}"; then
sim_config="${enableval}";
elif test -f "${srcdir}/${enableval}-config.h"; then
sim_config="${enableval}-config.h"
else
{ echo "configure: error: "Config file $enableval was not found"" 1>&2; exit 1; };
sim_config=std-config.h
fi;;
esac
if test x"$silent" != x"yes" && test x"$sim_config" != x""; then
echo "Setting config flags = $sim_config" 6>&1
fi
else
sim_config="std-config.h"
if test x"$silent" != x"yes"; then
echo "Setting config flags = $sim_config" 6>&1
fi
fi
# Check whether --enable-sim-opcode or --disable-sim-opcode was given.
if test "${enable_sim_opcode+set}" = set; then
enableval="$enable_sim_opcode"
case "${enableval}" in
yes|no) { echo "configure: error: "No value supplied for --enable-sim-opcode=file"" 1>&2; exit 1; };;
*) if test -f "${srcdir}/${enableval}"; then
sim_opcode="${enableval}"
elif test -f "${srcdir}/ppc-opcode-${enableval}"; then
sim_opcode="ppc-opcode-${enableval}"
else
{ echo "configure: error: "File $enableval is not an opcode rules file"" 1>&2; exit 1; };
sim_opcode="ppc-opcode-complex"
fi;;
esac
if test x"$silent" != x"yes" && test x"$sim_opcode" != x""; then
echo "Setting opcode flags = $sim_opcode" 6>&1
fi
else
sim_opcode="ppc-opcode-complex"
if test x"$silent" != x"yes"; then
echo "Setting opcode flags = $sim_opcode"
fi
fi
# Check whether --enable-sim-switch or --disable-sim-switch was given.
if test "${enable_sim_switch+set}" = set; then
enableval="$enable_sim_switch"
case "${enableval}" in
yes) sim_switch="-s";;
no) sim_switch="";;
*) { echo "configure: error: "--enable-sim-switch does not take a value"" 1>&2; exit 1; }; sim_switch="";;
esac
if test x"$silent" != x"yes" && test x"$sim_switch" != x""; then
echo "Setting switch flags = $sim_switch" 6>&1
fi
else
sim_switch="";
if test x"$silent" != x"yes"; then
echo "Setting switch flags = $sim_switch" 6>&1
fi
fi
# Check whether --enable-sim-duplicate or --disable-sim-duplicate was given.
if test "${enable_sim_duplicate+set}" = set; then
enableval="$enable_sim_duplicate"
case "${enableval}" in
yes) sim_dup="-E";;
no) sim_dup="";;
*) { echo "configure: error: "--enable-sim-duplicate does not take a value"" 1>&2; exit 1; }; sim_dup="";;
esac
if test x"$silent" != x"yes" && test x"$sim_dup" != x""; then
echo "Setting duplicate flags = $sim_dup" 6>&1
fi
else
sim_dup="-E"
if test x"$silent" != x"yes"; then
echo "Setting duplicate flags = $sim_dup" 6>&1
fi
fi
# Check whether --enable-sim-jump or --disable-sim-jump was given.
if test "${enable_sim_jump+set}" = set; then
enableval="$enable_sim_jump"
case "${enableval}" in
yes) sim_jump="-J";;
no) sim_jump="";;
*) { echo "configure: error: "--enable-sim-jump does not take a value"" 1>&2; exit 1; }; sim_jump="";;
esac
if test x"$silent" != x"yes" && test x"$sim_jump" != x""; then
echo "Setting jump flag = $sim_jump" 6>&1
fi
else
sim_jump="-E"
if test x"$silent" != x"yes"; then
echo "Setting jump flag = $sim_jump" 6>&1
fi
fi
# Check whether --enable-sim-filter or --disable-sim-filter was given.
if test "${enable_sim_filter+set}" = set; then
enableval="$enable_sim_filter"
case "${enableval}" in
yes) { echo "configure: error: "--enable-sim-filter must be specified with a rule to filter or no"" 1>&2; exit 1; }; sim_filter="";;
no) sim_filter="";;
*) sim_filter="-F $enableval";;
esac
if test x"$silent" != x"yes" && test x"$sim_filter" != x""; then
echo "Setting filter flags = $sim_filter" 6>&1
fi
else
sim_filter="-F 32,f"
if test x"$silent" != x"yes"; then
echo "Setting filter flags = $sim_filter" 6>&1
fi
fi
# Check whether --enable-sim-icache or --disable-sim-icache was given.
if test "${enable_sim_icache+set}" = set; then
enableval="$enable_sim_icache"
icache=""
case "${enableval}" in
yes) icache="1024"; sim_icache="-I $icache";;
no) sim_icache="";;
*) icache=1024
sim_icache="-"
for x in `echo "${enableval}" | sed -e "s/,/ /g"`; do
case "$x" in
define) sim_icache="${sim_icache}R";;
semantic) sim_icache="${sim_icache}C";;
insn) sim_icache="${sim_icache}S";;
0*|1*|2*|3*|4*|5*|6*|7*|8*|9*) icache=$x;;
*) { echo "configure: error: "Unknown value $x for --enable-sim-icache"" 1>&2; exit 1; }; sim_icache="";;
esac
done
sim_icache="${sim_icache}I $icache";;
esac
if test x"$silent" != x"yes" && test x"$icache" != x""; then
echo "Setting instruction cache size to $icache ($sim_icache)"
fi
else
sim_icache="-CSI 1024"
if test x"$silent" != x"yes"; then
echo "Setting instruction cache size to 1024 ($sim_icache)"
fi
fi
# Check whether --enable-sim-hardware or --disable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then
enableval="$enable_sim_hardware"
hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal"
case "${enableval}" in
yes) ;;
no) { echo "configure: error: "List of hardware must be specified for --enable-sim-hardware"" 1>&2; exit 1; }; hardware="";;
,*) hardware="${hardware}${enableval}";;
*) hardware="${enableval}";;
esac
sim_hw_src=`echo $hardware | sed -e 's/,/.c hw_/g' -e 's/^/hw_/' -e s'/$/.c/'`
sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'`
if test x"$silent" != x"yes" && test x"$hardware" != x""; then
echo "Setting hardware to $sim_hw_src, $sim_hw_obj"
fi
else
hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal"
sim_hw_src=`echo $hardware | sed -e 's/,/.c hw_/g' -e 's/^/hw_/' -e s'/$/.c/'`
sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'`
if test x"$silent" != x"yes"; then
echo "Setting hardware to $sim_hw_src, $sim_hw_obj"
fi
fi
# Check whether --enable-sim-packages or --disable-sim-packages was given.
if test "${enable_sim_packages+set}" = set; then
enableval="$enable_sim_packages"
packages=disklabel
case "${enableval}" in
yes) ;;
no) { echo "configure: error: "List of packages must be specified for --enable-sim-packages"" 1>&2; exit 1; }; packages="";;
,*) packages="${packages}${enableval}";;
*) packages="${enableval}"''
esac
sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'`
sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'`
if test x"$silent" != x"yes" && test x"$packages" != x""; then
echo "Setting packages to $sim_pk_src, $sim_pk_obj"
fi
else
packages=disklabel
sim_pk_src=`echo $packages | sed -e 's/,/.c pk_/g' -e 's/^/pk_/' -e 's/$/.c/'`
sim_pk_obj=`echo $sim_pk_src | sed -e 's/\.c/.o/g'`
if test x"$silent" != x"yes"; then
echo "Setting packages to $sim_pk_src, $sim_pk_obj"
fi
fi
# Check whether --enable-sim-inline or --disable-sim-inline was given.
if test "${enable_sim_inline+set}" = set; then
enableval="$enable_sim_inline"
sim_inline=""
case "$enableval" in
no) sim_inline="-DDEFAULT_INLINE=0";;
0) sim_inline="-DDEFAULT_INLINE=0";;
yes | 2) sim_inline="-DDEFAULT_INLINE=ALL_INLINE";;
1) sim_inline="-DDEFAULT_INLINE=INLINE_LOCALS";;
*) for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
new_flag=""
case "$x" in
*_INLINE=*) new_flag="-D$x";;
*=*) new_flag=`echo "$x" | sed -e "s/=/_INLINE=/" -e "s/^/-D/"`;;
*_INLINE) new_flag="-D$x=ALL_INLINE";;
*) new_flag="-D$x""_INLINE=ALL_INLINE";;
esac
if test x"$sim_inline" = x""; then
sim_inline="$new_flag"
else
sim_inline="$sim_inline $new_flag"
fi
done;;
esac
if test x"$silent" != x"yes" && test x"$sim_inline" != x""; then
echo "Setting inline flags = $sim_inline" 6>&1
fi
else
if test x"$GCC" != ""; then
sim_inline="-DDEFAULT_INLINE=INLINE_LOCALS"
if test x"$silent" != x"yes"; then
echo "Setting inline flags = $sim_inline" 6>&1
fi
else
sim_inline=""
fi
fi
# Check whether --enable-sim-bswap or --disable-sim-bswap was given.
if test "${enable_sim_bswap+set}" = set; then
enableval="$enable_sim_bswap"
case "${enableval}" in
yes) sim_bswap="-DWITH_BSWAP=1";;
no) sim_bswap="-DWITH_BSWAP=0";;
*) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";;
esac
if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
echo "Setting bswap flags = $sim_bswap" 6>&1
fi
else
sim_bswap=""
fi
# Check whether --enable-sim-endian or --disable-sim-endian was given.
if test "${enable_sim_endian+set}" = set; then
enableval="$enable_sim_endian"
case "${enableval}" in
yes) case "$target" in
*powerpc-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
*powerpcle-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
*) echo "Unknown target $target" 1>&6; sim_endian="-DWITH_TARGET_BYTE_ORDER=0";;
esac;;
no) sim_endian="-DWITH_TARGET_BYTE_ORDER=0";;
b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
*) { echo "configure: error: "Unknown value $enableval for --enable-sim-endian"" 1>&2; exit 1; }; sim_endian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
echo "Setting endian flags = $sim_endian" 6>&1
fi
else
sim_endian=""
fi
# Check whether --enable-sim-regparm or --disable-sim-regparm was given.
if test "${enable_sim_regparm+set}" = set; then
enableval="$enable_sim_regparm"
case "${enableval}" in
0*|1*|2*|3*|4*|5*|6*|7*|8*|9*) sim_regparm="-DWITH_REGPARM=${enableval}";;
no) sim_regparm="" ;;
yes) sim_regparm="-DWITH_REGPARM=3";;
*) { echo "configure: error: "Unknown value $enableval for --enable-sim-regparm"" 1>&2; exit 1; }; sim_regparm="";;
esac
if test x"$silent" != x"yes" && test x"$sim_regparm" != x""; then
echo "Setting regparm flags = $sim_regparm" 6>&1
fi
else
sim_regparm=""
fi
# Check whether --enable-sim-stdcall or --disable-sim-stdcall was given.
if test "${enable_sim_stdcall+set}" = set; then
enableval="$enable_sim_stdcall"
case "${enableval}" in
no) sim_stdcall="" ;;
std*) sim_stdcall="-DWITH_STDCALL=1";;
yes) sim_stdcall="-DWITH_STDCALL=1";;
*) { echo "configure: error: "Unknown value $enableval for --enable-sim-stdcall"" 1>&2; exit 1; }; sim_stdcall="";;
esac
if test x"$silent" != x"yes" && test x"$sim_stdcall" != x""; then
echo "Setting function call flags = $sim_stdcall" 6>&1
fi
else
sim_stdcall=""
fi
# Check whether --enable-sim-hostendian or --disable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then
enableval="$enable_sim_hostendian"
case "${enableval}" in
no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
*) { echo "configure: error: "Unknown value $enableval for --enable-sim-hostendian"" 1>&2; exit 1; }; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
echo "Setting hostendian flags = $sim_hostendian" 6>&1
fi
else
if test "x$cross_compiling" = "xno"; then
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
#line 1192 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
int main() { return 0; }
int t() {
#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN
bogus endian macros
#endif
; return 0; }
EOF
if { (eval echo configure:1204: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
#line 1208 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
int main() { return 0; }
int t() {
#if BYTE_ORDER != BIG_ENDIAN
not big endian
#endif
; return 0; }
EOF
if { (eval echo configure:1220: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_bigendian=yes
else
rm -rf conftest*
ac_cv_c_bigendian=no
fi
rm -f conftest*
fi
rm -f conftest*
if test $ac_cv_c_bigendian = unknown; then
if test "$cross_compiling" = yes; then
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
#line 1237 "configure"
#include "confdefs.h"
main () {
/* Are we little or big endian? From Harbison&Steele. */
union
{
long l;
char c[sizeof (long)];
} u;
u.l = 1;
exit (u.c[sizeof (long) - 1] == 1);
}
EOF
{ (eval echo configure:1250: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }
if test -s conftest && (./conftest; exit) 2>/dev/null; then
ac_cv_c_bigendian=no
else
ac_cv_c_bigendian=yes
fi
fi
rm -fr conftest*
fi
fi
echo "$ac_t""$ac_cv_c_bigendian" 1>&6
if test $ac_cv_c_bigendian = yes; then
cat >> confdefs.h <<\EOF
#define WORDS_BIGENDIAN 1
EOF
fi
if test $ac_cv_c_bigendian = yes; then
sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
else
sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
fi
else
sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
fi
fi
# Check whether --enable-sim-smp or --disable-sim-smp was given.
if test "${enable_sim_smp+set}" = set; then
enableval="$enable_sim_smp"
case "${enableval}" in
yes) sim_smp="-DWITH_SMP=5" ; sim_igen_smp="-N 5";;
no) sim_smp="-DWITH_SMP=0" ; sim_igen_smp="-N 0";;
*) sim_smp="-DWITH_SMP=$enableval" ; sim_igen_smp="-N $enableval";;
esac
if test x"$silent" != x"yes" && test x"$sim_smp" != x""; then
echo "Setting smp flags = $sim_smp" 6>&1
fi
else
sim_smp="-DWITH_SMP=5" ; sim_igen_smp="-N 5"
if test x"$silent" != x"yes"; then
echo "Setting smp flags = $sim_smp" 6>&1
fi
fi
# Check whether --enable-sim-xor-endian or --disable-sim-xor-endian was given.
if test "${enable_sim_xor_endian+set}" = set; then
enableval="$enable_sim_xor_endian"
case "${enableval}" in
yes) sim_xor_endian="-DWITH_XOR_ENDIAN=8";;
no) sim_xor_endian="-DWITH_XOR_ENDIAN=0";;
*) sim_xor_endian="-DWITH_XOR_ENDIAN=$enableval";;
esac
if test x"$silent" != x"yes" && test x"$sim_xor_endian" != x""; then
echo "Setting xor-endian flag = $sim_xor_endian" 6>&1
fi
else
sim_xor_endian=""
fi
# Check whether --enable-sim-bitsize or --disable-sim-bitsize was given.
if test "${enable_sim_bitsize+set}" = set; then
enableval="$enable_sim_bitsize"
case "${enableval}" in
32|64) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=$enableval";;
*) { echo "configure: error: "--enable-sim-bitsize was given $enableval" 1>&2; exit 1; }; sim_bitsize="";;
esac
if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then
echo "Setting bitsize flags = $sim_bitsize" 6>&1
fi
else
sim_bitsize=""
fi
# Check whether --enable-sim-hostbitsize or --disable-sim-hostbitsize was given.
if test "${enable_sim_hostbitsize+set}" = set; then
enableval="$enable_sim_hostbitsize"
case "${enableval}" in
32|64) sim_hostbitsize="-DWITH_HOST_WORD_BITSIZE=$enableval";;
*) { echo "configure: error: "--enable-sim-hostbitsize was given $enableval" 1>&2; exit 1; }; sim_hostbitsize="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostbitsize" != x""; then
echo "Setting hostbitsize flags = $sim_hostbitsize" 6>&1
fi
else
sim_hostbitsize=""
fi
# Check whether --enable-sim-env or --disable-sim-env was given.
if test "${enable_sim_env+set}" = set; then
enableval="$enable_sim_env"
case "${enableval}" in
operating | os | oea) sim_env="-DWITH_ENVIRONMENT=OPERATING_ENVIRONMENT";;
virtual | vea) sim_env="-DWITH_ENVIRONMENT=VIRTUAL_ENVIRONMENT";;
user | uea) sim_env="-DWITH_ENVIRONMENT=USER_ENVIRONMENT";;
no) sim_env="-DWITH_ENVIRONMENT=0";;
*) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-env"" 1>&2; exit 1; }; sim_env="";;
esac
if test x"$silent" != x"yes" && test x"$sim_env" != x""; then
echo "Setting env flags = $sim_env" 6>&1
fi
else
sim_env=""
fi
# Check whether --enable-sim-timebase or --disable-sim-timebase was given.
if test "${enable_sim_timebase+set}" = set; then
enableval="$enable_sim_timebase"
case "${enableval}" in
yes) sim_timebase="-DWITH_TIME_BASE=1";;
no) sim_timebase="-DWITH_TIME_BASE=0";;
*) { echo "configure: error: "--enable-sim-timebase does not take a value"" 1>&2; exit 1; }; sim_timebase="";;
esac
if test x"$silent" != x"yes" && test x"$sim_timebase" != x""; then
echo "Setting timebase flags = $sim_timebase" 6>&1
fi
else
sim_timebase=""
fi
# Check whether --enable-sim-alignment or --disable-sim-alignment was given.
if test "${enable_sim_alignment+set}" = set; then
enableval="$enable_sim_alignment"
case "${enableval}" in
yes | strict | STRICT) sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;
no | nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;
0 | default | DEFAULT) sim_alignment="-DWITH_ALIGNMENT=0";;
*) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-alignment"" 1>&2; exit 1; }; sim_alignment="";;
esac
if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then
echo "Setting alignment flags = $sim_alignment" 6>&1
fi
else
sim_alignment=""
fi
# Check whether --enable-sim-trace or --disable-sim-trace was given.
if test "${enable_sim_trace+set}" = set; then
enableval="$enable_sim_trace"
case "${enableval}" in
yes) sim_trace="-DWITH_TRACE=1";;
no) sim_trace="-DWITH_TRACE=0";;
*) { echo "configure: error: "--enable-sim-trace does not take a value"" 1>&2; exit 1; }; sim_trace="";;
esac
if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
echo "Setting trace flags = $sim_trace" 6>&1
fi
else
sim_trace=""
fi
# Check whether --enable-sim-assert or --disable-sim-assert was given.
if test "${enable_sim_assert+set}" = set; then
enableval="$enable_sim_assert"
case "${enableval}" in
yes) sim_assert="-DWITH_ASSERT=1";;
no) sim_assert="-DWITH_ASSERT=0";;
*) { echo "configure: error: "--enable-sim-assert does not take a value"" 1>&2; exit 1; }; sim_assert="";;
esac
if test x"$silent" != x"yes" && test x"$sim_assert" != x""; then
echo "Setting assert flags = $sim_assert" 6>&1
fi
else
sim_assert=""
fi
# Check whether --enable-sim-reserved-bits or --disable-sim-reserved-bits was given.
if test "${enable_sim_reserved_bits+set}" = set; then
enableval="$enable_sim_reserved_bits"
case "${enableval}" in
yes) sim_reserved="-DWITH_RESERVED_BITS=1";;
no) sim_reserved="-DWITH_RESERVED_BITS=0";;
*) { echo "configure: error: "--enable-sim-reserved-bits does not take a value"" 1>&2; exit 1; }; sim_reserved="";;
esac
if test x"$silent" != x"yes" && test x"$sim_reserved" != x""; then
echo "Setting reserved flags = $sim_reserved" 6>&1
fi
else
sim_reserved=""
fi
# Check whether --enable-sim-float or --disable-sim-float was given.
if test "${enable_sim_float+set}" = set; then
enableval="$enable_sim_float"
case "${enableval}" in
yes | hard) sim_float="-DWITH_FLOATING_POINT=HARD_FLOATING_POINT";;
no | soft) sim_float="-DWITH_FLOATING_POINT=SOFT_FLOATING_POINT";;
*) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-float"" 1>&2; exit 1; }; sim_float="";;
esac
if test x"$silent" != x"yes" && test x"$sim_float" != x""; then
echo "Setting float flags = $sim_float" 6>&1
fi
else
sim_float=""
fi
# Check whether --enable-sim-monitor or --disable-sim-monitor was given.
if test "${enable_sim_monitor+set}" = set; then
enableval="$enable_sim_monitor"
case "${enableval}" in
yes) sim_monitor="-DWITH_MON='MONITOR_INSTRUCTION_ISSUE | MONITOR_LOAD_STORE_UNIT'";;
no) sim_monitor="-DWITH_MON=0";;
instruction) sim_monitor="-DWITH_MON=MONITOR_INSTRUCTION_ISSUE";;
memory) sim_monitor="-DWITH_MON=MONITOR_LOAD_STORE_UNIT";;
*) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-mon"" 1>&2; exit 1; }; sim_env="";;
esac
if test x"$silent" != x"yes" && test x"$sim_monitor" != x""; then
echo "Setting monitor flags = $sim_monitor" 6>&1
fi
else
sim_monitor=""
fi
# Check whether --enable-sim-model or --disable-sim-model was given.
if test "${enable_sim_model+set}" = set; then
enableval="$enable_sim_model"
case "${enableval}" in
yes|no) { echo "configure: error: "No value supplied for --enable-sim-model=model"" 1>&2; exit 1; };;
*) sim_model="-DWITH_MODEL=${enableval}";;
esac
if test x"$silent" != x"yes" && test x"$sim_model" != x""; then
echo "Setting model flags = $sim_model" 6>&1
fi
else
sim_model=""
fi
# Check whether --enable-sim-default-model or --disable-sim-default-model was given.
if test "${enable_sim_default_model+set}" = set; then
enableval="$enable_sim_default_model"
case "${enableval}" in
yes|no) { echo "configure: error: "No value supplied for --enable-sim-default-model=model"" 1>&2; exit 1; };;
*) sim_default_model="-DWITH_DEFAULT_MODEL=${enableval}";;
esac
if test x"$silent" != x"yes" && test x"$sim_default_model" != x""; then
echo "Setting default-model flags = $sim_default_model" 6>&1
fi
else
sim_model=""
fi
# Check whether --enable-sim-model-issue or --disable-sim-model-issue was given.
if test "${enable_sim_model_issue+set}" = set; then
enableval="$enable_sim_model_issue"
case "${enableval}" in
yes) sim_model_issue="-DWITH_MODEL_ISSUE=MODEL_ISSUE_PROCESS";;
no) sim_model_issue="-DWITH_MODEL_ISSUE=MODEL_ISSUE_IGNORE";;
*) { echo "configure: error: "--enable-sim-model-issue does not take a value"" 1>&2; exit 1; }; sim_model_issue="";;
esac
if test x"$silent" != x"yes"; then
echo "Setting model-issue flags = $sim_model_issue" 6>&1
fi
else
sim_model_issue=""
fi
# Check whether --enable-sim-stdio or --disable-sim-stdio was given.
if test "${enable_sim_stdio+set}" = set; then
enableval="$enable_sim_stdio"
case "${enableval}" in
yes) sim_stdio="-DWITH_STDIO=DO_USE_STDIO";;
no) sim_stdio="-DWITH_STDIO=DONT_USE_STDIO";;
*) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-stdio"" 1>&2; exit 1; }; sim_stdio="";;
esac
if test x"$silent" != x"yes" && test x"$sim_stdio" != x""; then
echo "Setting stdio flags = $sim_stdio" 6>&1
fi
else
sim_stdio=""
fi
ac_aux_dir=
for ac_dir in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../..; do
if test -f $ac_dir/install-sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
elif test -f $ac_dir/install.sh; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
fi
done
if test -z "$ac_aux_dir"; then
{ echo "configure: error: can not find install-sh or install.sh in `cd $srcdir;pwd`/../.. $srcdir/`cd $srcdir;pwd`/../.." 1>&2; exit 1; }
fi
ac_config_guess=$ac_aux_dir/config.guess
ac_config_sub=$ac_aux_dir/config.sub
ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
# Do some error checking and defaulting for the host and target type.
# The inputs are:
# configure --host=HOST --target=TARGET --build=BUILD NONOPT
#
# The rules are:
# 1. You are not allowed to specify --host, --target, and nonopt at the
# same time.
# 2. Host defaults to nonopt.
# 3. If nonopt is not specified, then host defaults to the current host,
# as determined by config.guess.
# 4. Target and build default to nonopt.
# 5. If nonopt is not specified, then target and build default to host.
# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
case $host---$target---$nonopt in
NONE---*---* | *---NONE---* | *---*---NONE) ;;
*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
esac
# Make sure we can run config.sub.
if $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
host_alias=$host
case "$host_alias" in
NONE)
case $nonopt in
NONE)
if host_alias=`$ac_config_guess`; then :
else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
fi ;;
*) host_alias=$nonopt ;;
esac ;;
esac
host=`$ac_config_sub $host_alias`
host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
target_alias=$target
case "$target_alias" in
NONE)
case $nonopt in
NONE) target_alias=$host_alias ;;
*) target_alias=$nonopt ;;
esac ;;
esac
target=`$ac_config_sub $target_alias`
target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
build_alias=$build
case "$build_alias" in
NONE)
case $nonopt in
NONE) build_alias=$host_alias ;;
*) build_alias=$nonopt ;;
esac ;;
esac
build=`$ac_config_sub $build_alias`
build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6
test "$host_alias" != "$target_alias" &&
test "$program_prefix$program_suffix$program_transform_name" = \
NONENONEs,x,x, &&
program_prefix=${target_alias}-
if test "$program_transform_name" = s,x,x,; then
program_transform_name=
else
# Double any \ or $. echo might interpret backslashes.
cat <<\EOF_SED > conftestsed
s,\\,\\\\,g; s,\$,$$,g
EOF_SED
program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
rm -f conftestsed
fi
test "$program_prefix" != NONE &&
program_transform_name="s,^,${program_prefix},; $program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
# sed with no file args requires a program.
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
. ${srcdir}/../../bfd/configure.host
echo $ac_n "checking for st_blksize in struct stat""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_struct_st_blksize'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1657 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/stat.h>
int main() { return 0; }
int t() {
struct stat s; s.st_blksize;
; return 0; }
EOF
if { (eval echo configure:1666: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_st_blksize=yes
else
rm -rf conftest*
ac_cv_struct_st_blksize=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_struct_st_blksize" 1>&6
if test $ac_cv_struct_st_blksize = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_ST_BLKSIZE 1
EOF
fi
echo $ac_n "checking for st_blocks in struct stat""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_struct_st_blocks'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1690 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/stat.h>
int main() { return 0; }
int t() {
struct stat s; s.st_blocks;
; return 0; }
EOF
if { (eval echo configure:1699: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_st_blocks=yes
else
rm -rf conftest*
ac_cv_struct_st_blocks=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_struct_st_blocks" 1>&6
if test $ac_cv_struct_st_blocks = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_ST_BLOCKS 1
EOF
else
LIBOBJS="$LIBOBJS fileblocks.o"
fi
echo $ac_n "checking for st_rdev in struct stat""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_struct_st_rdev'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1725 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/stat.h>
int main() { return 0; }
int t() {
struct stat s; s.st_rdev;
; return 0; }
EOF
if { (eval echo configure:1734: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_st_rdev=yes
else
rm -rf conftest*
ac_cv_struct_st_rdev=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_struct_st_rdev" 1>&6
if test $ac_cv_struct_st_rdev = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_ST_RDEV 1
EOF
fi
echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1758 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <time.h>
int main() { return 0; }
int t() {
struct tm *tp; tp->tm_sec;
; return 0; }
EOF
if { (eval echo configure:1767: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tm=time.h
else
rm -rf conftest*
ac_cv_struct_tm=sys/time.h
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_struct_tm" 1>&6
if test $ac_cv_struct_tm = sys/time.h; then
cat >> confdefs.h <<\EOF
#define TM_IN_SYS_TIME 1
EOF
fi
echo $ac_n "checking for tm_zone in struct tm""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_struct_tm_zone'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1791 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_cv_struct_tm>
int main() { return 0; }
int t() {
struct tm tm; tm.tm_zone;
; return 0; }
EOF
if { (eval echo configure:1800: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tm_zone=yes
else
rm -rf conftest*
ac_cv_struct_tm_zone=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_struct_tm_zone" 1>&6
if test "$ac_cv_struct_tm_zone" = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_TM_ZONE 1
EOF
else
echo $ac_n "checking for tzname""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_var_tzname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1823 "configure"
#include "confdefs.h"
#include <time.h>
#ifndef tzname /* For SGI. */
extern char *tzname[]; /* RS6000 and others reject char **tzname. */
#endif
int main() { return 0; }
int t() {
atoi(*tzname);
; return 0; }
EOF
if { (eval echo configure:1834: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
rm -rf conftest*
ac_cv_var_tzname=yes
else
rm -rf conftest*
ac_cv_var_tzname=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_var_tzname" 1>&6
if test $ac_cv_var_tzname = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_TZNAME 1
EOF
fi
fi
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
fi
if test -z "$CPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# This must be in double quotes, not single quotes, because CPP may get
# substituted into the Makefile and "${CC-cc}" will confuse make.
CPP="${CC-cc} -E"
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
#line 1870 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1876: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
#line 1885 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:1891: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
rm -rf conftest*
CPP=/lib/cpp
fi
rm -f conftest*
fi
rm -f conftest*
ac_cv_prog_CPP="$CPP"
fi
CPP="$ac_cv_prog_CPP"
else
ac_cv_prog_CPP="$CPP"
fi
echo "$ac_t""$CPP" 1>&6
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 1916 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "uid_t" >/dev/null 2>&1; then
rm -rf conftest*
ac_cv_type_uid_t=yes
else
rm -rf conftest*
ac_cv_type_uid_t=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_type_uid_t" 1>&6
if test $ac_cv_type_uid_t = no; then
cat >> confdefs.h <<\EOF
#define uid_t int
EOF
cat >> confdefs.h <<\EOF
#define gid_t int
EOF
fi
echo $ac_n "checking type of array argument to getgroups""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_type_getgroups'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
ac_cv_type_getgroups=cross
else
cat > conftest.$ac_ext <<EOF
#line 1952 "configure"
#include "confdefs.h"
/* Thanks to Mike Rendell for this test. */
#include <sys/types.h>
#define NGID 256
#undef MAX
#define MAX(x, y) ((x) > (y) ? (x) : (y))
main()
{
gid_t gidset[NGID];
int i, n;
union { gid_t gval; long lval; } val;
val.lval = -1;
for (i = 0; i < NGID; i++)
gidset[i] = val.gval;
n = getgroups (sizeof (gidset) / MAX (sizeof (int), sizeof (gid_t)) - 1,
gidset);
/* Exit non-zero if getgroups seems to require an array of ints. This
happens when gid_t is short but getgroups modifies an array of ints. */
exit ((n > 0 && gidset[n] != val.gval) ? 1 : 0);
}
EOF
{ (eval echo configure:1977: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }
if test -s conftest && (./conftest; exit) 2>/dev/null; then
ac_cv_type_getgroups=gid_t
else
ac_cv_type_getgroups=int
fi
fi
rm -fr conftest*
if test $ac_cv_type_getgroups = cross; then
cat > conftest.$ac_ext <<EOF
#line 1987 "configure"
#include "confdefs.h"
#include <unistd.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "getgroups.*int.*gid_t" >/dev/null 2>&1; then
rm -rf conftest*
ac_cv_type_getgroups=gid_t
else
rm -rf conftest*
ac_cv_type_getgroups=int
fi
rm -f conftest*
fi
fi
echo "$ac_t""$ac_cv_type_getgroups" 1>&6
cat >> confdefs.h <<EOF
#define GETGROUPS_T $ac_cv_type_getgroups
EOF
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2015 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2023: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
ac_cv_header_stdc=yes
else
echo "$ac_err" >&5
rm -rf conftest*
ac_cv_header_stdc=no
fi
rm -f conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 2038 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "memchr" >/dev/null 2>&1; then
:
else
rm -rf conftest*
ac_cv_header_stdc=no
fi
rm -f conftest*
fi
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
#line 2056 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "free" >/dev/null 2>&1; then
:
else
rm -rf conftest*
ac_cv_header_stdc=no
fi
rm -f conftest*
fi
if test $ac_cv_header_stdc = yes; then
# /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
if test "$cross_compiling" = yes; then
:
else
cat > conftest.$ac_ext <<EOF
#line 2077 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
int main () { int i; for (i = 0; i < 256; i++)
if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
exit (0); }
EOF
{ (eval echo configure:2088: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }
if test -s conftest && (./conftest; exit) 2>/dev/null; then
:
else
ac_cv_header_stdc=no
fi
fi
rm -fr conftest*
fi
fi
echo "$ac_t""$ac_cv_header_stdc" 1>&6
if test $ac_cv_header_stdc = yes; then
cat >> confdefs.h <<\EOF
#define STDC_HEADERS 1
EOF
fi
echo $ac_n "checking for mode_t""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2112 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
#include <stdlib.h>
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "mode_t" >/dev/null 2>&1; then
rm -rf conftest*
ac_cv_type_mode_t=yes
else
rm -rf conftest*
ac_cv_type_mode_t=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_type_mode_t" 1>&6
if test $ac_cv_type_mode_t = no; then
cat >> confdefs.h <<\EOF
#define mode_t int
EOF
fi
echo $ac_n "checking for off_t""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2143 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
#include <stdlib.h>
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "off_t" >/dev/null 2>&1; then
rm -rf conftest*
ac_cv_type_off_t=yes
else
rm -rf conftest*
ac_cv_type_off_t=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_type_off_t" 1>&6
if test $ac_cv_type_off_t = no; then
cat >> confdefs.h <<\EOF
#define off_t long
EOF
fi
echo $ac_n "checking for pid_t""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2174 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
#include <stdlib.h>
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "pid_t" >/dev/null 2>&1; then
rm -rf conftest*
ac_cv_type_pid_t=yes
else
rm -rf conftest*
ac_cv_type_pid_t=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_type_pid_t" 1>&6
if test $ac_cv_type_pid_t = no; then
cat >> confdefs.h <<\EOF
#define pid_t int
EOF
fi
echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2205 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
#ifdef signal
#undef signal
#endif
#ifdef __cplusplus
extern "C" void (*signal (int, void (*)(int)))(int);
#else
void (*signal ()) ();
#endif
int main() { return 0; }
int t() {
int i;
; return 0; }
EOF
if { (eval echo configure:2223: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_type_signal=void
else
rm -rf conftest*
ac_cv_type_signal=int
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_type_signal" 1>&6
cat >> confdefs.h <<EOF
#define RETSIGTYPE $ac_cv_type_signal
EOF
echo $ac_n "checking for size_t""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2245 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
#include <stdlib.h>
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "size_t" >/dev/null 2>&1; then
rm -rf conftest*
ac_cv_type_size_t=yes
else
rm -rf conftest*
ac_cv_type_size_t=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_type_size_t" 1>&6
if test $ac_cv_type_size_t = no; then
cat >> confdefs.h <<\EOF
#define size_t unsigned
EOF
fi
echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2276 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
egrep "uid_t" >/dev/null 2>&1; then
rm -rf conftest*
ac_cv_type_uid_t=yes
else
rm -rf conftest*
ac_cv_type_uid_t=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_type_uid_t" 1>&6
if test $ac_cv_type_uid_t = no; then
cat >> confdefs.h <<\EOF
#define uid_t int
EOF
cat >> confdefs.h <<\EOF
#define gid_t int
EOF
fi
for ac_func in cfgetispeed cfgetospeed cfsetispeed cfsetospeed chdir chmod chown dup dup2 fchmod fchown fcntl fstat fstatfs getdirentries getegid geteuid getgid getpid getppid getrusage gettimeofday getuid ioctl kill link lseek lstat mkdir pipe readlink rmdir setreuid setregid stat sigprocmask stat symlink tcgetattr tcsetattr tcsendbreak tcdrain tcflush tcflow tcgetpgrp tcsetpgrp time umask unlink
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2312 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char $ac_func();
int main() { return 0; }
int t() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
choke me
#else
$ac_func();
#endif
; return 0; }
EOF
if { (eval echo configure:2336: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
rm -rf conftest*
eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
cat >> confdefs.h <<EOF
#define $ac_tr_func 1
EOF
else
echo "$ac_t""no" 1>&6
fi
done
for ac_hdr in fcntl.h stdlib.h string.h strings.h sys/ioctl.h sys/mount.h sys/param.h sys/resource.h sys/stat.h sys/termio.h sys/termios.h sys/time.h sys/times.h sys/types.h time.h unistd.h
do
ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2367 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
{ (eval echo configure:2372: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
else
echo "$ac_err" >&5
rm -rf conftest*
eval "ac_cv_header_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
else
echo "$ac_t""no" 1>&6
fi
done
ac_header_dirent=no
for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h
do
ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2405 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_hdr>
int main() { return 0; }
int t() {
DIR *dirp = 0;
; return 0; }
EOF
if { (eval echo configure:2414: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=yes"
else
rm -rf conftest*
eval "ac_cv_header_dirent_$ac_safe=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$ac_cv_header_dirent_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdedfghijklmnopqrstuvwxyz./\055' 'ABCDEDFGHIJKLMNOPQRSTUVWXYZ___'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
ac_header_dirent=$ac_hdr; break
else
echo "$ac_t""no" 1>&6
fi
done
# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix.
if test $ac_header_dirent = dirent.h; then
echo $ac_n "checking for -ldir""... $ac_c" 1>&6
ac_lib_var=`echo dir'_'opendir | tr './+\055' '__p_'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-ldir $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2445 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char opendir();
int main() { return 0; }
int t() {
opendir()
; return 0; }
EOF
if { (eval echo configure:2457: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
LIBS="$LIBS -ldir"
else
echo "$ac_t""no" 1>&6
fi
else
echo $ac_n "checking for -lx""... $ac_c" 1>&6
ac_lib_var=`echo x'_'opendir | tr './+\055' '__p_'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_save_LIBS="$LIBS"
LIBS="-lx $LIBS"
cat > conftest.$ac_ext <<EOF
#line 2484 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char opendir();
int main() { return 0; }
int t() {
opendir()
; return 0; }
EOF
if { (eval echo configure:2496: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=no"
fi
rm -f conftest*
LIBS="$ac_save_LIBS"
fi
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
LIBS="$LIBS -lx"
else
echo "$ac_t""no" 1>&6
fi
fi
sim_termio=""
echo $ac_n "checking for struct termios""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_termios_struct'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2523 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/termios.h>
int main() { return 0; }
int t() {
static struct termios x;
x.c_iflag = 0;
x.c_oflag = 0;
x.c_cflag = 0;
x.c_lflag = 0;
x.c_cc[NCCS] = 0;
; return 0; }
EOF
if { (eval echo configure:2537: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_termios_struct=yes
else
rm -rf conftest*
ac_cv_termios_struct=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_termios_struct" 1>&6
if test $ac_cv_termios_struct = yes; then
sim_termio="$sim_termio -DHAVE_TERMIOS_STRUCTURE"
fi
if test "$ac_cv_termios_struct" = "yes"; then
echo $ac_n "checking for c_line field in struct termios""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_termios_cline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2559 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/termios.h>
int main() { return 0; }
int t() {
static struct termios x; x.c_line = 0;
; return 0; }
EOF
if { (eval echo configure:2568: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_termios_cline=yes
else
rm -rf conftest*
ac_cv_termios_cline=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_termios_cline" 1>&6
if test $ac_cv_termios_cline = yes; then
sim_termio="$sim_termio -DHAVE_TERMIOS_CLINE"
fi
else
ac_cv_termios_cline=no
fi
if test "$ac_cv_termios_struct" != "yes"; then
echo $ac_n "checking for struct termio""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_termio_struct'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2594 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/termio.h>
int main() { return 0; }
int t() {
static struct termio x;
x.c_iflag = 0;
x.c_oflag = 0;
x.c_cflag = 0;
x.c_lflag = 0;
x.c_cc[NCC] = 0;
; return 0; }
EOF
if { (eval echo configure:2608: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_termio_struct=yes
else
rm -rf conftest*
ac_cv_termio_struct=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_termio_struct" 1>&6
if test $ac_cv_termio_struct = yes; then
sim_termio="$sim_termio -DHAVE_TERMIO_STRUCTURE"
fi
else
ac_cv_termio_struct=no
fi
if test "$ac_cv_termio_struct" = "yes"; then
echo $ac_n "checking for c_line field in struct termio""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_termio_cline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
#line 2633 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/termio.h>
int main() { return 0; }
int t() {
static struct termio x; x.c_line = 0;
; return 0; }
EOF
if { (eval echo configure:2642: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_termio_cline=yes
else
rm -rf conftest*
ac_cv_termio_cline=no
fi
rm -f conftest*
fi
echo "$ac_t""$ac_cv_termio_cline" 1>&6
if test $ac_cv_termio_cline = yes; then
sim_termio="$sim_termio -DHAVE_TERMIO_CLINE"
fi
else
ac_cv_termio_cline=no
fi
AR=${AR-ar}
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RANLIB="ranlib"
break
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
fi
fi
RANLIB="$ac_cv_prog_RANLIB"
if test -n "$RANLIB"; then
echo "$ac_t""$RANLIB" 1>&6
else
echo "$ac_t""no" 1>&6
fi
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs. It is not useful on other systems.
# If it contains results you don't want to keep, you may remove or edit it.
#
# By default, configure uses ./config.cache as the cache file,
# creating it if it does not exist already. You can give configure
# the --cache-file=FILE option to use a different cache file; that is
# what configure does when it calls configure scripts in
# subdirectories, so they share the cache.
# Giving --cache-file=/dev/null disables caching, for debugging configure.
# config.status only pays attention to the cache file if you give it the
# --recheck option to rerun configure.
#
EOF
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
>> confcache
if cmp -s $cache_file confcache; then
:
else
if test -w $cache_file; then
echo "updating cache $cache_file"
cat confcache > $cache_file
else
echo "not updating unwritable cache $cache_file"
fi
fi
rm -f confcache
trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
# Any assignment to VPATH causes Sun make to only execute
# the first set of double-colon rules, so remove it if not needed.
# If there is a colon in the path, we need to keep it.
if test "x$srcdir" = x.; then
ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
fi
trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
DEFS=-DHAVE_CONFIG_H
# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}
echo creating $CONFIG_STATUS
rm -f $CONFIG_STATUS
cat > $CONFIG_STATUS <<EOF
#! /bin/sh
# Generated automatically by configure.
# Run this file to recreate the current configuration.
# This directory was configured as follows,
# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
#
# $0 $ac_configure_args
#
# Compiler output produced by configure, useful for debugging
# configure, is in ./config.log if it exists.
ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
for ac_option
do
case "\$ac_option" in
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
echo "$CONFIG_STATUS generated by autoconf version 2.10"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
*) echo "\$ac_cs_usage"; exit 1 ;;
esac
done
ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"
trap 'rm -fr `echo "Makefile config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
# Protect against being on the right side of a sed subst in config.status.
sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@exec_prefix@%$exec_prefix%g
s%@prefix@%$prefix%g
s%@program_transform_name@%$program_transform_name%g
s%@bindir@%$bindir%g
s%@sbindir@%$sbindir%g
s%@libexecdir@%$libexecdir%g
s%@datadir@%$datadir%g
s%@sysconfdir@%$sysconfdir%g
s%@sharedstatedir@%$sharedstatedir%g
s%@localstatedir@%$localstatedir%g
s%@libdir@%$libdir%g
s%@includedir@%$includedir%g
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@CC@%$CC%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@host_vendor@%$host_vendor%g
s%@host_os@%$host_os%g
s%@target@%$target%g
s%@target_alias@%$target_alias%g
s%@target_cpu@%$target_cpu%g
s%@target_vendor@%$target_vendor%g
s%@target_os@%$target_os%g
s%@build@%$build%g
s%@build_alias@%$build_alias%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
s%@LIBOBJS@%$LIBOBJS%g
s%@CPP@%$CPP%g
s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
s%@HDEFINES@%$HDEFINES%g
s%@AR@%$AR%g
s%@RANLIB@%$RANLIB%g
s%@sim_cflags@%$sim_cflags%g
s%@sim_warnings@%$sim_warnings%g
s%@sim_line_nr@%$sim_line_nr%g
s%@sim_config@%$sim_config%g
s%@sim_opcode@%$sim_opcode%g
s%@sim_switch@%$sim_switch%g
s%@sim_dup@%$sim_dup%g
s%@sim_jump@%$sim_jump%g
s%@sim_filter@%$sim_filter%g
s%@sim_icache@%$sim_icache%g
s%@sim_hw_src@%$sim_hw_src%g
s%@sim_hw_obj@%$sim_hw_obj%g
s%@sim_pk_src@%$sim_pk_src%g
s%@sim_pk_obj@%$sim_pk_obj%g
s%@sim_inline@%$sim_inline%g
s%@sim_bswap@%$sim_bswap%g
s%@sim_endian@%$sim_endian%g
s%@sim_regparm@%$sim_regparm%g
s%@sim_stdcall@%$sim_stdcall%g
s%@sim_xor_endian@%$sim_xor_endian%g
s%@sim_hostendian@%$sim_hostendian%g
s%@sim_smp@%$sim_smp%g
s%@sim_igen_smp@%$sim_igen_smp%g
s%@sim_bitsize@%$sim_bitsize%g
s%@sim_hostbitsize@%$sim_hostbitsize%g
s%@sim_env@%$sim_env%g
s%@sim_timebase@%$sim_timebase%g
s%@sim_alignment@%$sim_alignment%g
s%@sim_float@%$sim_float%g
s%@sim_trace@%$sim_trace%g
s%@sim_assert@%$sim_assert%g
s%@sim_reserved@%$sim_reserved%g
s%@sim_monitor@%$sim_monitor%g
s%@sim_model@%$sim_model%g
s%@sim_default_model@%$sim_default_model%g
s%@sim_model_issue@%$sim_model_issue%g
s%@sim_stdio@%$sim_stdio%g
s%@sim_termio@%$sim_termio%g
CEOF
EOF
cat >> $CONFIG_STATUS <<EOF
CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
# Support "outfile[:infile]", defaulting infile="outfile.in".
case "$ac_file" in
*:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
# Adjust relative srcdir, etc. for subdirectories.
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
# The file is in a subdirectory.
test ! -d "$ac_dir" && mkdir "$ac_dir"
ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
# A "../" for each directory in $ac_dir_suffix.
ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
else
ac_dir_suffix= ac_dots=
fi
case "$ac_given_srcdir" in
.) srcdir=.
if test -z "$ac_dots"; then top_srcdir=.
else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
/*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
*) # Relative path.
srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
top_srcdir="$ac_dots$ac_given_srcdir" ;;
esac
case "$ac_given_INSTALL" in
[/$]*) INSTALL="$ac_given_INSTALL" ;;
*) INSTALL="$ac_dots$ac_given_INSTALL" ;;
esac
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
case "$ac_file" in
*Makefile*) ac_comsub="1i\\
# $configure_input" ;;
*) ac_comsub= ;;
esac
sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
fi; done
rm -f conftest.subs
# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
#
# ac_d sets the value in "#define NAME VALUE" lines.
ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)'
ac_dB='\([ ][ ]*\)[^ ]*%\1#\2'
ac_dC='\3'
ac_dD='%g'
# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE".
ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
ac_uB='\([ ]\)%\1#\2define\3'
ac_uC=' '
ac_uD='\4%g'
# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)'
ac_eB='$%\1#\2define\3'
ac_eC=' '
ac_eD='%g'
CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"}
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
# Support "outfile[:infile]", defaulting infile="outfile.in".
case "$ac_file" in
*:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
echo creating $ac_file
rm -f conftest.frag conftest.in conftest.out
cp $ac_given_srcdir/$ac_file_in conftest.in
EOF
# Transform confdefs.h into a sed script conftest.vals that substitutes
# the proper values into config.h.in to produce config.h. And first:
# Protect against being on the right side of a sed subst in config.status.
# Protect against being in an unquoted here document in config.status.
rm -f conftest.vals
cat > conftest.hdr <<\EOF
s/[\\&%]/\\&/g
s%[\\$`]%\\&%g
s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp
s%ac_d%ac_u%gp
s%ac_u%ac_e%gp
EOF
sed -n -f conftest.hdr confdefs.h > conftest.vals
rm -f conftest.hdr
# This sed command replaces #undef with comments. This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
cat >> conftest.vals <<\EOF
s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */%
EOF
# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.
# Maximum number of lines to put in a single here document.
ac_max_here_lines=12
rm -f conftest.tail
while :
do
ac_lines=`grep -c . conftest.vals`
# grep -c gives empty output for an empty file on some AIX systems.
if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi
# Write a limited-size here document to conftest.frag.
echo ' cat > conftest.frag <<CEOF' >> $CONFIG_STATUS
sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS
echo 'CEOF
sed -f conftest.frag conftest.in > conftest.out
rm -f conftest.in
mv conftest.out conftest.in
' >> $CONFIG_STATUS
sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail
rm -f conftest.vals
mv conftest.tail conftest.vals
done
rm -f conftest.vals
cat >> $CONFIG_STATUS <<\EOF
rm -f conftest.frag conftest.h
echo "/* $ac_file. Generated automatically by configure. */" > conftest.h
cat conftest.in >> conftest.h
rm -f conftest.in
if cmp -s $ac_file conftest.h 2>/dev/null; then
echo "$ac_file is unchanged"
rm -f conftest.h
else
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
# The file is in a subdirectory.
test ! -d "$ac_dir" && mkdir "$ac_dir"
fi
rm -f $ac_file
mv conftest.h $ac_file
fi
fi; done
case x$CONFIG_HEADERS in xconfig.h:config.in) echo > stamp-h ;; esac
exit 0
EOF
chmod +x $CONFIG_STATUS
rm -fr confdefs* $ac_clean_files
test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
Reference in New Issue View Git Blame Copy Permalink