mirror of
https://sourceware.org/git/binutils-gdb.git
synced 2024-12-03 04:12:10 +08:00
492d29ea1c
This patch splits the TRY_CATCH macro into three, so that we go from this: ~~~ volatile gdb_exception ex; TRY_CATCH (ex, RETURN_MASK_ERROR) { } if (ex.reason < 0) { } ~~~ to this: ~~~ TRY { } CATCH (ex, RETURN_MASK_ERROR) { } END_CATCH ~~~ Thus, we'll be getting rid of the local volatile exception object, and declaring the caught exception in the catch block. This allows reimplementing TRY/CATCH in terms of C++ exceptions when building in C++ mode, while still allowing to build GDB in C mode (using setjmp/longjmp), as a transition step. TBC, after this patch, is it _not_ valid to have code between the TRY and the CATCH blocks, like: TRY { } // some code here. CATCH (ex, RETURN_MASK_ERROR) { } END_CATCH Just like it isn't valid to do that with C++'s native try/catch. By switching to creating the exception object inside the CATCH block scope, we can get rid of all the explicitly allocated volatile exception objects all over the tree, and map the CATCH block more directly to C++'s catch blocks. The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was done with a script, rerun from scratch at every rebase, no manual editing involved. After the mechanical conversion, a few places needed manual intervention, to fix preexisting cases where we were using the exception object outside of the TRY_CATCH block, and cases where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH after this patch]. The result was folded into this patch so that GDB still builds at each incremental step. END_CATCH is necessary for two reasons: First, because we name the exception object in the CATCH block, which requires creating a scope, which in turn must be closed somewhere. Declaring the exception variable in the initializer field of a for block, like: #define CATCH(EXCEPTION, mask) \ for (struct gdb_exception EXCEPTION; \ exceptions_state_mc_catch (&EXCEPTION, MASK); \ EXCEPTION = exception_none) would avoid needing END_CATCH, but alas, in C mode, we build with C90, which doesn't allow mixed declarations and code. Second, because when TRY/CATCH are wired to real C++ try/catch, as long as we need to handle cleanup chains, even if there's no CATCH block that wants to catch the exception, we need for stop at every frame in the unwind chain and run cleanups, then rethrow. That will be done in END_CATCH. After we require C++, we'll still need TRY/CATCH/END_CATCH until cleanups are completely phased out -- TRY/CATCH in C++ mode will save/restore the current cleanup chain, like in C mode, and END_CATCH catches otherwise uncaugh exceptions, runs cleanups and rethrows, so that C++ cleanups and exceptions can coexist. IMO, this still makes the TRY/CATCH code look a bit more like a newcomer would expect, so IMO worth it even if we weren't considering C++. gdb/ChangeLog. 2015-03-07 Pedro Alves <palves@redhat.com> * common/common-exceptions.c (struct catcher) <exception>: No longer a pointer to volatile exception. Now an exception value. <mask>: Delete field. (exceptions_state_mc_init): Remove all parameters. Adjust. (exceptions_state_mc): No longer pop the catcher here. (exceptions_state_mc_catch): New function. (throw_exception): Adjust. * common/common-exceptions.h (exceptions_state_mc_init): Remove all parameters. (exceptions_state_mc_catch): Declare. (TRY_CATCH): Rename to ... (TRY): ... this. Remove EXCEPTION and MASK parameters. (CATCH, END_CATCH): New. All callers adjusted. gdb/gdbserver/ChangeLog: 2015-03-07 Pedro Alves <palves@redhat.com> Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH instead.
1104 lines
33 KiB
C
1104 lines
33 KiB
C
/* Native support code for PPC AIX, for GDB the GNU debugger.
|
|
|
|
Copyright (C) 2006-2015 Free Software Foundation, Inc.
|
|
|
|
Free Software Foundation, Inc.
|
|
|
|
This file is part of GDB.
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
|
|
|
#include "defs.h"
|
|
#include "osabi.h"
|
|
#include "regcache.h"
|
|
#include "regset.h"
|
|
#include "gdbtypes.h"
|
|
#include "gdbcore.h"
|
|
#include "target.h"
|
|
#include "value.h"
|
|
#include "infcall.h"
|
|
#include "objfiles.h"
|
|
#include "breakpoint.h"
|
|
#include "rs6000-tdep.h"
|
|
#include "ppc-tdep.h"
|
|
#include "rs6000-aix-tdep.h"
|
|
#include "xcoffread.h"
|
|
#include "solib.h"
|
|
#include "solib-aix.h"
|
|
#include "xml-utils.h"
|
|
|
|
/* If the kernel has to deliver a signal, it pushes a sigcontext
|
|
structure on the stack and then calls the signal handler, passing
|
|
the address of the sigcontext in an argument register. Usually
|
|
the signal handler doesn't save this register, so we have to
|
|
access the sigcontext structure via an offset from the signal handler
|
|
frame.
|
|
The following constants were determined by experimentation on AIX 3.2. */
|
|
#define SIG_FRAME_PC_OFFSET 96
|
|
#define SIG_FRAME_LR_OFFSET 108
|
|
#define SIG_FRAME_FP_OFFSET 284
|
|
|
|
|
|
/* Core file support. */
|
|
|
|
static struct ppc_reg_offsets rs6000_aix32_reg_offsets =
|
|
{
|
|
/* General-purpose registers. */
|
|
208, /* r0_offset */
|
|
4, /* gpr_size */
|
|
4, /* xr_size */
|
|
24, /* pc_offset */
|
|
28, /* ps_offset */
|
|
32, /* cr_offset */
|
|
36, /* lr_offset */
|
|
40, /* ctr_offset */
|
|
44, /* xer_offset */
|
|
48, /* mq_offset */
|
|
|
|
/* Floating-point registers. */
|
|
336, /* f0_offset */
|
|
56, /* fpscr_offset */
|
|
4, /* fpscr_size */
|
|
|
|
/* AltiVec registers. */
|
|
-1, /* vr0_offset */
|
|
-1, /* vscr_offset */
|
|
-1 /* vrsave_offset */
|
|
};
|
|
|
|
static struct ppc_reg_offsets rs6000_aix64_reg_offsets =
|
|
{
|
|
/* General-purpose registers. */
|
|
0, /* r0_offset */
|
|
8, /* gpr_size */
|
|
4, /* xr_size */
|
|
264, /* pc_offset */
|
|
256, /* ps_offset */
|
|
288, /* cr_offset */
|
|
272, /* lr_offset */
|
|
280, /* ctr_offset */
|
|
292, /* xer_offset */
|
|
-1, /* mq_offset */
|
|
|
|
/* Floating-point registers. */
|
|
312, /* f0_offset */
|
|
296, /* fpscr_offset */
|
|
4, /* fpscr_size */
|
|
|
|
/* AltiVec registers. */
|
|
-1, /* vr0_offset */
|
|
-1, /* vscr_offset */
|
|
-1 /* vrsave_offset */
|
|
};
|
|
|
|
|
|
/* Supply register REGNUM in the general-purpose register set REGSET
|
|
from the buffer specified by GREGS and LEN to register cache
|
|
REGCACHE. If REGNUM is -1, do this for all registers in REGSET. */
|
|
|
|
static void
|
|
rs6000_aix_supply_regset (const struct regset *regset,
|
|
struct regcache *regcache, int regnum,
|
|
const void *gregs, size_t len)
|
|
{
|
|
ppc_supply_gregset (regset, regcache, regnum, gregs, len);
|
|
ppc_supply_fpregset (regset, regcache, regnum, gregs, len);
|
|
}
|
|
|
|
/* Collect register REGNUM in the general-purpose register set
|
|
REGSET, from register cache REGCACHE into the buffer specified by
|
|
GREGS and LEN. If REGNUM is -1, do this for all registers in
|
|
REGSET. */
|
|
|
|
static void
|
|
rs6000_aix_collect_regset (const struct regset *regset,
|
|
const struct regcache *regcache, int regnum,
|
|
void *gregs, size_t len)
|
|
{
|
|
ppc_collect_gregset (regset, regcache, regnum, gregs, len);
|
|
ppc_collect_fpregset (regset, regcache, regnum, gregs, len);
|
|
}
|
|
|
|
/* AIX register set. */
|
|
|
|
static const struct regset rs6000_aix32_regset =
|
|
{
|
|
&rs6000_aix32_reg_offsets,
|
|
rs6000_aix_supply_regset,
|
|
rs6000_aix_collect_regset,
|
|
};
|
|
|
|
static const struct regset rs6000_aix64_regset =
|
|
{
|
|
&rs6000_aix64_reg_offsets,
|
|
rs6000_aix_supply_regset,
|
|
rs6000_aix_collect_regset,
|
|
};
|
|
|
|
/* Iterate over core file register note sections. */
|
|
|
|
static void
|
|
rs6000_aix_iterate_over_regset_sections (struct gdbarch *gdbarch,
|
|
iterate_over_regset_sections_cb *cb,
|
|
void *cb_data,
|
|
const struct regcache *regcache)
|
|
{
|
|
if (gdbarch_tdep (gdbarch)->wordsize == 4)
|
|
cb (".reg", 592, &rs6000_aix32_regset, NULL, cb_data);
|
|
else
|
|
cb (".reg", 576, &rs6000_aix64_regset, NULL, cb_data);
|
|
}
|
|
|
|
|
|
/* Pass the arguments in either registers, or in the stack. In RS/6000,
|
|
the first eight words of the argument list (that might be less than
|
|
eight parameters if some parameters occupy more than one word) are
|
|
passed in r3..r10 registers. Float and double parameters are
|
|
passed in fpr's, in addition to that. Rest of the parameters if any
|
|
are passed in user stack. There might be cases in which half of the
|
|
parameter is copied into registers, the other half is pushed into
|
|
stack.
|
|
|
|
Stack must be aligned on 64-bit boundaries when synthesizing
|
|
function calls.
|
|
|
|
If the function is returning a structure, then the return address is passed
|
|
in r3, then the first 7 words of the parameters can be passed in registers,
|
|
starting from r4. */
|
|
|
|
static CORE_ADDR
|
|
rs6000_push_dummy_call (struct gdbarch *gdbarch, struct value *function,
|
|
struct regcache *regcache, CORE_ADDR bp_addr,
|
|
int nargs, struct value **args, CORE_ADDR sp,
|
|
int struct_return, CORE_ADDR struct_addr)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
|
int ii;
|
|
int len = 0;
|
|
int argno; /* current argument number */
|
|
int argbytes; /* current argument byte */
|
|
gdb_byte tmp_buffer[50];
|
|
int f_argno = 0; /* current floating point argno */
|
|
int wordsize = gdbarch_tdep (gdbarch)->wordsize;
|
|
CORE_ADDR func_addr = find_function_addr (function, NULL);
|
|
|
|
struct value *arg = 0;
|
|
struct type *type;
|
|
|
|
ULONGEST saved_sp;
|
|
|
|
/* The calling convention this function implements assumes the
|
|
processor has floating-point registers. We shouldn't be using it
|
|
on PPC variants that lack them. */
|
|
gdb_assert (ppc_floating_point_unit_p (gdbarch));
|
|
|
|
/* The first eight words of ther arguments are passed in registers.
|
|
Copy them appropriately. */
|
|
ii = 0;
|
|
|
|
/* If the function is returning a `struct', then the first word
|
|
(which will be passed in r3) is used for struct return address.
|
|
In that case we should advance one word and start from r4
|
|
register to copy parameters. */
|
|
if (struct_return)
|
|
{
|
|
regcache_raw_write_unsigned (regcache, tdep->ppc_gp0_regnum + 3,
|
|
struct_addr);
|
|
ii++;
|
|
}
|
|
|
|
/* effectively indirect call... gcc does...
|
|
|
|
return_val example( float, int);
|
|
|
|
eabi:
|
|
float in fp0, int in r3
|
|
offset of stack on overflow 8/16
|
|
for varargs, must go by type.
|
|
power open:
|
|
float in r3&r4, int in r5
|
|
offset of stack on overflow different
|
|
both:
|
|
return in r3 or f0. If no float, must study how gcc emulates floats;
|
|
pay attention to arg promotion.
|
|
User may have to cast\args to handle promotion correctly
|
|
since gdb won't know if prototype supplied or not. */
|
|
|
|
for (argno = 0, argbytes = 0; argno < nargs && ii < 8; ++ii)
|
|
{
|
|
int reg_size = register_size (gdbarch, ii + 3);
|
|
|
|
arg = args[argno];
|
|
type = check_typedef (value_type (arg));
|
|
len = TYPE_LENGTH (type);
|
|
|
|
if (TYPE_CODE (type) == TYPE_CODE_FLT)
|
|
{
|
|
/* Floating point arguments are passed in fpr's, as well as gpr's.
|
|
There are 13 fpr's reserved for passing parameters. At this point
|
|
there is no way we would run out of them.
|
|
|
|
Always store the floating point value using the register's
|
|
floating-point format. */
|
|
const int fp_regnum = tdep->ppc_fp0_regnum + 1 + f_argno;
|
|
gdb_byte reg_val[MAX_REGISTER_SIZE];
|
|
struct type *reg_type = register_type (gdbarch, fp_regnum);
|
|
|
|
gdb_assert (len <= 8);
|
|
|
|
convert_typed_floating (value_contents (arg), type,
|
|
reg_val, reg_type);
|
|
regcache_cooked_write (regcache, fp_regnum, reg_val);
|
|
++f_argno;
|
|
}
|
|
|
|
if (len > reg_size)
|
|
{
|
|
|
|
/* Argument takes more than one register. */
|
|
while (argbytes < len)
|
|
{
|
|
gdb_byte word[MAX_REGISTER_SIZE];
|
|
memset (word, 0, reg_size);
|
|
memcpy (word,
|
|
((char *) value_contents (arg)) + argbytes,
|
|
(len - argbytes) > reg_size
|
|
? reg_size : len - argbytes);
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_gp0_regnum + 3 + ii,
|
|
word);
|
|
++ii, argbytes += reg_size;
|
|
|
|
if (ii >= 8)
|
|
goto ran_out_of_registers_for_arguments;
|
|
}
|
|
argbytes = 0;
|
|
--ii;
|
|
}
|
|
else
|
|
{
|
|
/* Argument can fit in one register. No problem. */
|
|
int adj = gdbarch_byte_order (gdbarch)
|
|
== BFD_ENDIAN_BIG ? reg_size - len : 0;
|
|
gdb_byte word[MAX_REGISTER_SIZE];
|
|
|
|
memset (word, 0, reg_size);
|
|
memcpy (word, value_contents (arg), len);
|
|
regcache_cooked_write (regcache, tdep->ppc_gp0_regnum + 3 +ii, word);
|
|
}
|
|
++argno;
|
|
}
|
|
|
|
ran_out_of_registers_for_arguments:
|
|
|
|
regcache_cooked_read_unsigned (regcache,
|
|
gdbarch_sp_regnum (gdbarch),
|
|
&saved_sp);
|
|
|
|
/* Location for 8 parameters are always reserved. */
|
|
sp -= wordsize * 8;
|
|
|
|
/* Another six words for back chain, TOC register, link register, etc. */
|
|
sp -= wordsize * 6;
|
|
|
|
/* Stack pointer must be quadword aligned. */
|
|
sp &= -16;
|
|
|
|
/* If there are more arguments, allocate space for them in
|
|
the stack, then push them starting from the ninth one. */
|
|
|
|
if ((argno < nargs) || argbytes)
|
|
{
|
|
int space = 0, jj;
|
|
|
|
if (argbytes)
|
|
{
|
|
space += ((len - argbytes + 3) & -4);
|
|
jj = argno + 1;
|
|
}
|
|
else
|
|
jj = argno;
|
|
|
|
for (; jj < nargs; ++jj)
|
|
{
|
|
struct value *val = args[jj];
|
|
space += ((TYPE_LENGTH (value_type (val))) + 3) & -4;
|
|
}
|
|
|
|
/* Add location required for the rest of the parameters. */
|
|
space = (space + 15) & -16;
|
|
sp -= space;
|
|
|
|
/* This is another instance we need to be concerned about
|
|
securing our stack space. If we write anything underneath %sp
|
|
(r1), we might conflict with the kernel who thinks he is free
|
|
to use this area. So, update %sp first before doing anything
|
|
else. */
|
|
|
|
regcache_raw_write_signed (regcache,
|
|
gdbarch_sp_regnum (gdbarch), sp);
|
|
|
|
/* If the last argument copied into the registers didn't fit there
|
|
completely, push the rest of it into stack. */
|
|
|
|
if (argbytes)
|
|
{
|
|
write_memory (sp + 24 + (ii * 4),
|
|
value_contents (arg) + argbytes,
|
|
len - argbytes);
|
|
++argno;
|
|
ii += ((len - argbytes + 3) & -4) / 4;
|
|
}
|
|
|
|
/* Push the rest of the arguments into stack. */
|
|
for (; argno < nargs; ++argno)
|
|
{
|
|
|
|
arg = args[argno];
|
|
type = check_typedef (value_type (arg));
|
|
len = TYPE_LENGTH (type);
|
|
|
|
|
|
/* Float types should be passed in fpr's, as well as in the
|
|
stack. */
|
|
if (TYPE_CODE (type) == TYPE_CODE_FLT && f_argno < 13)
|
|
{
|
|
|
|
gdb_assert (len <= 8);
|
|
|
|
regcache_cooked_write (regcache,
|
|
tdep->ppc_fp0_regnum + 1 + f_argno,
|
|
value_contents (arg));
|
|
++f_argno;
|
|
}
|
|
|
|
write_memory (sp + 24 + (ii * 4), value_contents (arg), len);
|
|
ii += ((len + 3) & -4) / 4;
|
|
}
|
|
}
|
|
|
|
/* Set the stack pointer. According to the ABI, the SP is meant to
|
|
be set _before_ the corresponding stack space is used. On AIX,
|
|
this even applies when the target has been completely stopped!
|
|
Not doing this can lead to conflicts with the kernel which thinks
|
|
that it still has control over this not-yet-allocated stack
|
|
region. */
|
|
regcache_raw_write_signed (regcache, gdbarch_sp_regnum (gdbarch), sp);
|
|
|
|
/* Set back chain properly. */
|
|
store_unsigned_integer (tmp_buffer, wordsize, byte_order, saved_sp);
|
|
write_memory (sp, tmp_buffer, wordsize);
|
|
|
|
/* Point the inferior function call's return address at the dummy's
|
|
breakpoint. */
|
|
regcache_raw_write_signed (regcache, tdep->ppc_lr_regnum, bp_addr);
|
|
|
|
/* Set the TOC register value. */
|
|
regcache_raw_write_signed (regcache, tdep->ppc_toc_regnum,
|
|
solib_aix_get_toc_value (func_addr));
|
|
|
|
target_store_registers (regcache, -1);
|
|
return sp;
|
|
}
|
|
|
|
static enum return_value_convention
|
|
rs6000_return_value (struct gdbarch *gdbarch, struct value *function,
|
|
struct type *valtype, struct regcache *regcache,
|
|
gdb_byte *readbuf, const gdb_byte *writebuf)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
|
|
|
/* The calling convention this function implements assumes the
|
|
processor has floating-point registers. We shouldn't be using it
|
|
on PowerPC variants that lack them. */
|
|
gdb_assert (ppc_floating_point_unit_p (gdbarch));
|
|
|
|
/* AltiVec extension: Functions that declare a vector data type as a
|
|
return value place that return value in VR2. */
|
|
if (TYPE_CODE (valtype) == TYPE_CODE_ARRAY && TYPE_VECTOR (valtype)
|
|
&& TYPE_LENGTH (valtype) == 16)
|
|
{
|
|
if (readbuf)
|
|
regcache_cooked_read (regcache, tdep->ppc_vr0_regnum + 2, readbuf);
|
|
if (writebuf)
|
|
regcache_cooked_write (regcache, tdep->ppc_vr0_regnum + 2, writebuf);
|
|
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
|
|
/* If the called subprogram returns an aggregate, there exists an
|
|
implicit first argument, whose value is the address of a caller-
|
|
allocated buffer into which the callee is assumed to store its
|
|
return value. All explicit parameters are appropriately
|
|
relabeled. */
|
|
if (TYPE_CODE (valtype) == TYPE_CODE_STRUCT
|
|
|| TYPE_CODE (valtype) == TYPE_CODE_UNION
|
|
|| TYPE_CODE (valtype) == TYPE_CODE_ARRAY)
|
|
return RETURN_VALUE_STRUCT_CONVENTION;
|
|
|
|
/* Scalar floating-point values are returned in FPR1 for float or
|
|
double, and in FPR1:FPR2 for quadword precision. Fortran
|
|
complex*8 and complex*16 are returned in FPR1:FPR2, and
|
|
complex*32 is returned in FPR1:FPR4. */
|
|
if (TYPE_CODE (valtype) == TYPE_CODE_FLT
|
|
&& (TYPE_LENGTH (valtype) == 4 || TYPE_LENGTH (valtype) == 8))
|
|
{
|
|
struct type *regtype = register_type (gdbarch, tdep->ppc_fp0_regnum);
|
|
gdb_byte regval[8];
|
|
|
|
/* FIXME: kettenis/2007-01-01: Add support for quadword
|
|
precision and complex. */
|
|
|
|
if (readbuf)
|
|
{
|
|
regcache_cooked_read (regcache, tdep->ppc_fp0_regnum + 1, regval);
|
|
convert_typed_floating (regval, regtype, readbuf, valtype);
|
|
}
|
|
if (writebuf)
|
|
{
|
|
convert_typed_floating (writebuf, valtype, regval, regtype);
|
|
regcache_cooked_write (regcache, tdep->ppc_fp0_regnum + 1, regval);
|
|
}
|
|
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
|
|
/* Values of the types int, long, short, pointer, and char (length
|
|
is less than or equal to four bytes), as well as bit values of
|
|
lengths less than or equal to 32 bits, must be returned right
|
|
justified in GPR3 with signed values sign extended and unsigned
|
|
values zero extended, as necessary. */
|
|
if (TYPE_LENGTH (valtype) <= tdep->wordsize)
|
|
{
|
|
if (readbuf)
|
|
{
|
|
ULONGEST regval;
|
|
|
|
/* For reading we don't have to worry about sign extension. */
|
|
regcache_cooked_read_unsigned (regcache, tdep->ppc_gp0_regnum + 3,
|
|
®val);
|
|
store_unsigned_integer (readbuf, TYPE_LENGTH (valtype), byte_order,
|
|
regval);
|
|
}
|
|
if (writebuf)
|
|
{
|
|
/* For writing, use unpack_long since that should handle any
|
|
required sign extension. */
|
|
regcache_cooked_write_unsigned (regcache, tdep->ppc_gp0_regnum + 3,
|
|
unpack_long (valtype, writebuf));
|
|
}
|
|
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
|
|
/* Eight-byte non-floating-point scalar values must be returned in
|
|
GPR3:GPR4. */
|
|
|
|
if (TYPE_LENGTH (valtype) == 8)
|
|
{
|
|
gdb_assert (TYPE_CODE (valtype) != TYPE_CODE_FLT);
|
|
gdb_assert (tdep->wordsize == 4);
|
|
|
|
if (readbuf)
|
|
{
|
|
gdb_byte regval[8];
|
|
|
|
regcache_cooked_read (regcache, tdep->ppc_gp0_regnum + 3, regval);
|
|
regcache_cooked_read (regcache, tdep->ppc_gp0_regnum + 4,
|
|
regval + 4);
|
|
memcpy (readbuf, regval, 8);
|
|
}
|
|
if (writebuf)
|
|
{
|
|
regcache_cooked_write (regcache, tdep->ppc_gp0_regnum + 3, writebuf);
|
|
regcache_cooked_write (regcache, tdep->ppc_gp0_regnum + 4,
|
|
writebuf + 4);
|
|
}
|
|
|
|
return RETURN_VALUE_REGISTER_CONVENTION;
|
|
}
|
|
|
|
return RETURN_VALUE_STRUCT_CONVENTION;
|
|
}
|
|
|
|
/* Support for CONVERT_FROM_FUNC_PTR_ADDR (ARCH, ADDR, TARG).
|
|
|
|
Usually a function pointer's representation is simply the address
|
|
of the function. On the RS/6000 however, a function pointer is
|
|
represented by a pointer to an OPD entry. This OPD entry contains
|
|
three words, the first word is the address of the function, the
|
|
second word is the TOC pointer (r2), and the third word is the
|
|
static chain value. Throughout GDB it is currently assumed that a
|
|
function pointer contains the address of the function, which is not
|
|
easy to fix. In addition, the conversion of a function address to
|
|
a function pointer would require allocation of an OPD entry in the
|
|
inferior's memory space, with all its drawbacks. To be able to
|
|
call C++ virtual methods in the inferior (which are called via
|
|
function pointers), find_function_addr uses this function to get the
|
|
function address from a function pointer. */
|
|
|
|
/* Return real function address if ADDR (a function pointer) is in the data
|
|
space and is therefore a special function pointer. */
|
|
|
|
static CORE_ADDR
|
|
rs6000_convert_from_func_ptr_addr (struct gdbarch *gdbarch,
|
|
CORE_ADDR addr,
|
|
struct target_ops *targ)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
|
struct obj_section *s;
|
|
|
|
s = find_pc_section (addr);
|
|
|
|
/* Normally, functions live inside a section that is executable.
|
|
So, if ADDR points to a non-executable section, then treat it
|
|
as a function descriptor and return the target address iff
|
|
the target address itself points to a section that is executable. */
|
|
if (s && (s->the_bfd_section->flags & SEC_CODE) == 0)
|
|
{
|
|
CORE_ADDR pc = 0;
|
|
struct obj_section *pc_section;
|
|
|
|
TRY
|
|
{
|
|
pc = read_memory_unsigned_integer (addr, tdep->wordsize, byte_order);
|
|
}
|
|
CATCH (e, RETURN_MASK_ERROR)
|
|
{
|
|
/* An error occured during reading. Probably a memory error
|
|
due to the section not being loaded yet. This address
|
|
cannot be a function descriptor. */
|
|
return addr;
|
|
}
|
|
END_CATCH
|
|
|
|
pc_section = find_pc_section (pc);
|
|
|
|
if (pc_section && (pc_section->the_bfd_section->flags & SEC_CODE))
|
|
return pc;
|
|
}
|
|
|
|
return addr;
|
|
}
|
|
|
|
|
|
/* Calculate the destination of a branch/jump. Return -1 if not a branch. */
|
|
|
|
static CORE_ADDR
|
|
branch_dest (struct frame_info *frame, int opcode, int instr,
|
|
CORE_ADDR pc, CORE_ADDR safety)
|
|
{
|
|
struct gdbarch *gdbarch = get_frame_arch (frame);
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
|
CORE_ADDR dest;
|
|
int immediate;
|
|
int absolute;
|
|
int ext_op;
|
|
|
|
absolute = (int) ((instr >> 1) & 1);
|
|
|
|
switch (opcode)
|
|
{
|
|
case 18:
|
|
immediate = ((instr & ~3) << 6) >> 6; /* br unconditional */
|
|
if (absolute)
|
|
dest = immediate;
|
|
else
|
|
dest = pc + immediate;
|
|
break;
|
|
|
|
case 16:
|
|
immediate = ((instr & ~3) << 16) >> 16; /* br conditional */
|
|
if (absolute)
|
|
dest = immediate;
|
|
else
|
|
dest = pc + immediate;
|
|
break;
|
|
|
|
case 19:
|
|
ext_op = (instr >> 1) & 0x3ff;
|
|
|
|
if (ext_op == 16) /* br conditional register */
|
|
{
|
|
dest = get_frame_register_unsigned (frame, tdep->ppc_lr_regnum) & ~3;
|
|
|
|
/* If we are about to return from a signal handler, dest is
|
|
something like 0x3c90. The current frame is a signal handler
|
|
caller frame, upon completion of the sigreturn system call
|
|
execution will return to the saved PC in the frame. */
|
|
if (dest < AIX_TEXT_SEGMENT_BASE)
|
|
dest = read_memory_unsigned_integer
|
|
(get_frame_base (frame) + SIG_FRAME_PC_OFFSET,
|
|
tdep->wordsize, byte_order);
|
|
}
|
|
|
|
else if (ext_op == 528) /* br cond to count reg */
|
|
{
|
|
dest = get_frame_register_unsigned (frame,
|
|
tdep->ppc_ctr_regnum) & ~3;
|
|
|
|
/* If we are about to execute a system call, dest is something
|
|
like 0x22fc or 0x3b00. Upon completion the system call
|
|
will return to the address in the link register. */
|
|
if (dest < AIX_TEXT_SEGMENT_BASE)
|
|
dest = get_frame_register_unsigned (frame,
|
|
tdep->ppc_lr_regnum) & ~3;
|
|
}
|
|
else
|
|
return -1;
|
|
break;
|
|
|
|
default:
|
|
return -1;
|
|
}
|
|
return (dest < AIX_TEXT_SEGMENT_BASE) ? safety : dest;
|
|
}
|
|
|
|
/* AIX does not support PT_STEP. Simulate it. */
|
|
|
|
static int
|
|
rs6000_software_single_step (struct frame_info *frame)
|
|
{
|
|
struct gdbarch *gdbarch = get_frame_arch (frame);
|
|
struct address_space *aspace = get_frame_address_space (frame);
|
|
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
|
int ii, insn;
|
|
CORE_ADDR loc;
|
|
CORE_ADDR breaks[2];
|
|
int opcode;
|
|
|
|
loc = get_frame_pc (frame);
|
|
|
|
insn = read_memory_integer (loc, 4, byte_order);
|
|
|
|
if (ppc_deal_with_atomic_sequence (frame))
|
|
return 1;
|
|
|
|
breaks[0] = loc + PPC_INSN_SIZE;
|
|
opcode = insn >> 26;
|
|
breaks[1] = branch_dest (frame, opcode, insn, loc, breaks[0]);
|
|
|
|
/* Don't put two breakpoints on the same address. */
|
|
if (breaks[1] == breaks[0])
|
|
breaks[1] = -1;
|
|
|
|
for (ii = 0; ii < 2; ++ii)
|
|
{
|
|
/* ignore invalid breakpoint. */
|
|
if (breaks[ii] == -1)
|
|
continue;
|
|
insert_single_step_breakpoint (gdbarch, aspace, breaks[ii]);
|
|
}
|
|
|
|
errno = 0; /* FIXME, don't ignore errors! */
|
|
/* What errors? {read,write}_memory call error(). */
|
|
return 1;
|
|
}
|
|
|
|
/* Implement the "auto_wide_charset" gdbarch method for this platform. */
|
|
|
|
static const char *
|
|
rs6000_aix_auto_wide_charset (void)
|
|
{
|
|
return "UTF-16";
|
|
}
|
|
|
|
/* Implement an osabi sniffer for RS6000/AIX.
|
|
|
|
This function assumes that ABFD's flavour is XCOFF. In other words,
|
|
it should be registered as a sniffer for bfd_target_xcoff_flavour
|
|
objfiles only. A failed assertion will be raised if this condition
|
|
is not met. */
|
|
|
|
static enum gdb_osabi
|
|
rs6000_aix_osabi_sniffer (bfd *abfd)
|
|
{
|
|
gdb_assert (bfd_get_flavour (abfd) == bfd_target_xcoff_flavour);
|
|
|
|
/* The only noticeable difference between Lynx178 XCOFF files and
|
|
AIX XCOFF files comes from the fact that there are no shared
|
|
libraries on Lynx178. On AIX, we are betting that an executable
|
|
linked with no shared library will never exist. */
|
|
if (xcoff_get_n_import_files (abfd) <= 0)
|
|
return GDB_OSABI_UNKNOWN;
|
|
|
|
return GDB_OSABI_AIX;
|
|
}
|
|
|
|
/* A structure encoding the offset and size of a field within
|
|
a struct. */
|
|
|
|
struct field_info
|
|
{
|
|
int offset;
|
|
int size;
|
|
};
|
|
|
|
/* A structure describing the layout of all the fields of interest
|
|
in AIX's struct ld_info. Each field in this struct corresponds
|
|
to the field of the same name in struct ld_info. */
|
|
|
|
struct ld_info_desc
|
|
{
|
|
struct field_info ldinfo_next;
|
|
struct field_info ldinfo_fd;
|
|
struct field_info ldinfo_textorg;
|
|
struct field_info ldinfo_textsize;
|
|
struct field_info ldinfo_dataorg;
|
|
struct field_info ldinfo_datasize;
|
|
struct field_info ldinfo_filename;
|
|
};
|
|
|
|
/* The following data has been generated by compiling and running
|
|
the following program on AIX 5.3. */
|
|
|
|
#if 0
|
|
#include <stddef.h>
|
|
#include <stdio.h>
|
|
#define __LDINFO_PTRACE32__
|
|
#define __LDINFO_PTRACE64__
|
|
#include <sys/ldr.h>
|
|
|
|
#define pinfo(type,member) \
|
|
{ \
|
|
struct type ldi = {0}; \
|
|
\
|
|
printf (" {%d, %d},\t/* %s */\n", \
|
|
offsetof (struct type, member), \
|
|
sizeof (ldi.member), \
|
|
#member); \
|
|
} \
|
|
while (0)
|
|
|
|
int
|
|
main (void)
|
|
{
|
|
printf ("static const struct ld_info_desc ld_info32_desc =\n{\n");
|
|
pinfo (__ld_info32, ldinfo_next);
|
|
pinfo (__ld_info32, ldinfo_fd);
|
|
pinfo (__ld_info32, ldinfo_textorg);
|
|
pinfo (__ld_info32, ldinfo_textsize);
|
|
pinfo (__ld_info32, ldinfo_dataorg);
|
|
pinfo (__ld_info32, ldinfo_datasize);
|
|
pinfo (__ld_info32, ldinfo_filename);
|
|
printf ("};\n");
|
|
|
|
printf ("\n");
|
|
|
|
printf ("static const struct ld_info_desc ld_info64_desc =\n{\n");
|
|
pinfo (__ld_info64, ldinfo_next);
|
|
pinfo (__ld_info64, ldinfo_fd);
|
|
pinfo (__ld_info64, ldinfo_textorg);
|
|
pinfo (__ld_info64, ldinfo_textsize);
|
|
pinfo (__ld_info64, ldinfo_dataorg);
|
|
pinfo (__ld_info64, ldinfo_datasize);
|
|
pinfo (__ld_info64, ldinfo_filename);
|
|
printf ("};\n");
|
|
|
|
return 0;
|
|
}
|
|
#endif /* 0 */
|
|
|
|
/* Layout of the 32bit version of struct ld_info. */
|
|
|
|
static const struct ld_info_desc ld_info32_desc =
|
|
{
|
|
{0, 4}, /* ldinfo_next */
|
|
{4, 4}, /* ldinfo_fd */
|
|
{8, 4}, /* ldinfo_textorg */
|
|
{12, 4}, /* ldinfo_textsize */
|
|
{16, 4}, /* ldinfo_dataorg */
|
|
{20, 4}, /* ldinfo_datasize */
|
|
{24, 2}, /* ldinfo_filename */
|
|
};
|
|
|
|
/* Layout of the 64bit version of struct ld_info. */
|
|
|
|
static const struct ld_info_desc ld_info64_desc =
|
|
{
|
|
{0, 4}, /* ldinfo_next */
|
|
{8, 4}, /* ldinfo_fd */
|
|
{16, 8}, /* ldinfo_textorg */
|
|
{24, 8}, /* ldinfo_textsize */
|
|
{32, 8}, /* ldinfo_dataorg */
|
|
{40, 8}, /* ldinfo_datasize */
|
|
{48, 2}, /* ldinfo_filename */
|
|
};
|
|
|
|
/* A structured representation of one entry read from the ld_info
|
|
binary data provided by the AIX loader. */
|
|
|
|
struct ld_info
|
|
{
|
|
ULONGEST next;
|
|
int fd;
|
|
CORE_ADDR textorg;
|
|
ULONGEST textsize;
|
|
CORE_ADDR dataorg;
|
|
ULONGEST datasize;
|
|
char *filename;
|
|
char *member_name;
|
|
};
|
|
|
|
/* Return a struct ld_info object corresponding to the entry at
|
|
LDI_BUF.
|
|
|
|
Note that the filename and member_name strings still point
|
|
to the data in LDI_BUF. So LDI_BUF must not be deallocated
|
|
while the struct ld_info object returned is in use. */
|
|
|
|
static struct ld_info
|
|
rs6000_aix_extract_ld_info (struct gdbarch *gdbarch,
|
|
const gdb_byte *ldi_buf)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
|
struct type *ptr_type = builtin_type (gdbarch)->builtin_data_ptr;
|
|
const struct ld_info_desc desc
|
|
= tdep->wordsize == 8 ? ld_info64_desc : ld_info32_desc;
|
|
struct ld_info info;
|
|
|
|
info.next = extract_unsigned_integer (ldi_buf + desc.ldinfo_next.offset,
|
|
desc.ldinfo_next.size,
|
|
byte_order);
|
|
info.fd = extract_signed_integer (ldi_buf + desc.ldinfo_fd.offset,
|
|
desc.ldinfo_fd.size,
|
|
byte_order);
|
|
info.textorg = extract_typed_address (ldi_buf + desc.ldinfo_textorg.offset,
|
|
ptr_type);
|
|
info.textsize
|
|
= extract_unsigned_integer (ldi_buf + desc.ldinfo_textsize.offset,
|
|
desc.ldinfo_textsize.size,
|
|
byte_order);
|
|
info.dataorg = extract_typed_address (ldi_buf + desc.ldinfo_dataorg.offset,
|
|
ptr_type);
|
|
info.datasize
|
|
= extract_unsigned_integer (ldi_buf + desc.ldinfo_datasize.offset,
|
|
desc.ldinfo_datasize.size,
|
|
byte_order);
|
|
info.filename = (char *) ldi_buf + desc.ldinfo_filename.offset;
|
|
info.member_name = info.filename + strlen (info.filename) + 1;
|
|
|
|
return info;
|
|
}
|
|
|
|
/* Append to OBJSTACK an XML string description of the shared library
|
|
corresponding to LDI, following the TARGET_OBJECT_LIBRARIES_AIX
|
|
format. */
|
|
|
|
static void
|
|
rs6000_aix_shared_library_to_xml (struct ld_info *ldi,
|
|
struct obstack *obstack)
|
|
{
|
|
char *p;
|
|
|
|
obstack_grow_str (obstack, "<library name=\"");
|
|
p = xml_escape_text (ldi->filename);
|
|
obstack_grow_str (obstack, p);
|
|
xfree (p);
|
|
obstack_grow_str (obstack, "\"");
|
|
|
|
if (ldi->member_name[0] != '\0')
|
|
{
|
|
obstack_grow_str (obstack, " member=\"");
|
|
p = xml_escape_text (ldi->member_name);
|
|
obstack_grow_str (obstack, p);
|
|
xfree (p);
|
|
obstack_grow_str (obstack, "\"");
|
|
}
|
|
|
|
obstack_grow_str (obstack, " text_addr=\"");
|
|
obstack_grow_str (obstack, core_addr_to_string (ldi->textorg));
|
|
obstack_grow_str (obstack, "\"");
|
|
|
|
obstack_grow_str (obstack, " text_size=\"");
|
|
obstack_grow_str (obstack, pulongest (ldi->textsize));
|
|
obstack_grow_str (obstack, "\"");
|
|
|
|
obstack_grow_str (obstack, " data_addr=\"");
|
|
obstack_grow_str (obstack, core_addr_to_string (ldi->dataorg));
|
|
obstack_grow_str (obstack, "\"");
|
|
|
|
obstack_grow_str (obstack, " data_size=\"");
|
|
obstack_grow_str (obstack, pulongest (ldi->datasize));
|
|
obstack_grow_str (obstack, "\"");
|
|
|
|
obstack_grow_str (obstack, "></library>");
|
|
}
|
|
|
|
/* Convert the ld_info binary data provided by the AIX loader into
|
|
an XML representation following the TARGET_OBJECT_LIBRARIES_AIX
|
|
format.
|
|
|
|
LDI_BUF is a buffer containing the ld_info data.
|
|
READBUF, OFFSET and LEN follow the same semantics as target_ops'
|
|
to_xfer_partial target_ops method.
|
|
|
|
If CLOSE_LDINFO_FD is nonzero, then this routine also closes
|
|
the ldinfo_fd file descriptor. This is useful when the ldinfo
|
|
data is obtained via ptrace, as ptrace opens a file descriptor
|
|
for each and every entry; but we cannot use this descriptor
|
|
as the consumer of the XML library list might live in a different
|
|
process. */
|
|
|
|
ULONGEST
|
|
rs6000_aix_ld_info_to_xml (struct gdbarch *gdbarch, const gdb_byte *ldi_buf,
|
|
gdb_byte *readbuf, ULONGEST offset, ULONGEST len,
|
|
int close_ldinfo_fd)
|
|
{
|
|
struct obstack obstack;
|
|
const char *buf;
|
|
ULONGEST len_avail;
|
|
|
|
obstack_init (&obstack);
|
|
obstack_grow_str (&obstack, "<library-list-aix version=\"1.0\">\n");
|
|
|
|
while (1)
|
|
{
|
|
struct ld_info ldi = rs6000_aix_extract_ld_info (gdbarch, ldi_buf);
|
|
|
|
rs6000_aix_shared_library_to_xml (&ldi, &obstack);
|
|
if (close_ldinfo_fd)
|
|
close (ldi.fd);
|
|
|
|
if (!ldi.next)
|
|
break;
|
|
ldi_buf = ldi_buf + ldi.next;
|
|
}
|
|
|
|
obstack_grow_str0 (&obstack, "</library-list-aix>\n");
|
|
|
|
buf = obstack_finish (&obstack);
|
|
len_avail = strlen (buf);
|
|
if (offset >= len_avail)
|
|
len= 0;
|
|
else
|
|
{
|
|
if (len > len_avail - offset)
|
|
len = len_avail - offset;
|
|
memcpy (readbuf, buf + offset, len);
|
|
}
|
|
|
|
obstack_free (&obstack, NULL);
|
|
return len;
|
|
}
|
|
|
|
/* Implement the core_xfer_shared_libraries_aix gdbarch method. */
|
|
|
|
static ULONGEST
|
|
rs6000_aix_core_xfer_shared_libraries_aix (struct gdbarch *gdbarch,
|
|
gdb_byte *readbuf,
|
|
ULONGEST offset,
|
|
ULONGEST len)
|
|
{
|
|
struct bfd_section *ldinfo_sec;
|
|
int ldinfo_size;
|
|
gdb_byte *ldinfo_buf;
|
|
struct cleanup *cleanup;
|
|
LONGEST result;
|
|
|
|
ldinfo_sec = bfd_get_section_by_name (core_bfd, ".ldinfo");
|
|
if (ldinfo_sec == NULL)
|
|
error (_("cannot find .ldinfo section from core file: %s"),
|
|
bfd_errmsg (bfd_get_error ()));
|
|
ldinfo_size = bfd_get_section_size (ldinfo_sec);
|
|
|
|
ldinfo_buf = xmalloc (ldinfo_size);
|
|
cleanup = make_cleanup (xfree, ldinfo_buf);
|
|
|
|
if (! bfd_get_section_contents (core_bfd, ldinfo_sec,
|
|
ldinfo_buf, 0, ldinfo_size))
|
|
error (_("unable to read .ldinfo section from core file: %s"),
|
|
bfd_errmsg (bfd_get_error ()));
|
|
|
|
result = rs6000_aix_ld_info_to_xml (gdbarch, ldinfo_buf, readbuf,
|
|
offset, len, 0);
|
|
|
|
do_cleanups (cleanup);
|
|
return result;
|
|
}
|
|
|
|
static void
|
|
rs6000_aix_init_osabi (struct gdbarch_info info, struct gdbarch *gdbarch)
|
|
{
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
|
|
/* RS6000/AIX does not support PT_STEP. Has to be simulated. */
|
|
set_gdbarch_software_single_step (gdbarch, rs6000_software_single_step);
|
|
|
|
/* Displaced stepping is currently not supported in combination with
|
|
software single-stepping. */
|
|
set_gdbarch_displaced_step_copy_insn (gdbarch, NULL);
|
|
set_gdbarch_displaced_step_fixup (gdbarch, NULL);
|
|
set_gdbarch_displaced_step_free_closure (gdbarch, NULL);
|
|
set_gdbarch_displaced_step_location (gdbarch, NULL);
|
|
|
|
set_gdbarch_push_dummy_call (gdbarch, rs6000_push_dummy_call);
|
|
set_gdbarch_return_value (gdbarch, rs6000_return_value);
|
|
set_gdbarch_long_double_bit (gdbarch, 8 * TARGET_CHAR_BIT);
|
|
|
|
/* Handle RS/6000 function pointers (which are really function
|
|
descriptors). */
|
|
set_gdbarch_convert_from_func_ptr_addr
|
|
(gdbarch, rs6000_convert_from_func_ptr_addr);
|
|
|
|
/* Core file support. */
|
|
set_gdbarch_iterate_over_regset_sections
|
|
(gdbarch, rs6000_aix_iterate_over_regset_sections);
|
|
set_gdbarch_core_xfer_shared_libraries_aix
|
|
(gdbarch, rs6000_aix_core_xfer_shared_libraries_aix);
|
|
|
|
if (tdep->wordsize == 8)
|
|
tdep->lr_frame_offset = 16;
|
|
else
|
|
tdep->lr_frame_offset = 8;
|
|
|
|
if (tdep->wordsize == 4)
|
|
/* PowerOpen / AIX 32 bit. The saved area or red zone consists of
|
|
19 4 byte GPRS + 18 8 byte FPRs giving a total of 220 bytes.
|
|
Problem is, 220 isn't frame (16 byte) aligned. Round it up to
|
|
224. */
|
|
set_gdbarch_frame_red_zone_size (gdbarch, 224);
|
|
else
|
|
set_gdbarch_frame_red_zone_size (gdbarch, 0);
|
|
|
|
set_gdbarch_auto_wide_charset (gdbarch, rs6000_aix_auto_wide_charset);
|
|
|
|
set_solib_ops (gdbarch, &solib_aix_so_ops);
|
|
}
|
|
|
|
/* Provide a prototype to silence -Wmissing-prototypes. */
|
|
extern initialize_file_ftype _initialize_rs6000_aix_tdep;
|
|
|
|
void
|
|
_initialize_rs6000_aix_tdep (void)
|
|
{
|
|
gdbarch_register_osabi_sniffer (bfd_arch_rs6000,
|
|
bfd_target_xcoff_flavour,
|
|
rs6000_aix_osabi_sniffer);
|
|
gdbarch_register_osabi_sniffer (bfd_arch_powerpc,
|
|
bfd_target_xcoff_flavour,
|
|
rs6000_aix_osabi_sniffer);
|
|
|
|
gdbarch_register_osabi (bfd_arch_rs6000, 0, GDB_OSABI_AIX,
|
|
rs6000_aix_init_osabi);
|
|
gdbarch_register_osabi (bfd_arch_powerpc, 0, GDB_OSABI_AIX,
|
|
rs6000_aix_init_osabi);
|
|
}
|
|
|